Releases: xyzz/vita-moonlight
5th vita alpha
Changes:
- Fix crash at first time (dcd1dc8)
- Improve input packet handle (#24)
- Change connection option (#26)
- Code cleanup for input handling (#27, #30, #31)
- Support L2/R2/L3/R3 Buttons on PSTV (#36)
- Update build toolchains & Fix connection problems under GFE 3.0 (#39)
Important
Some changes make to break compatibility of configure file & input mapper file.
If you got a problem about input(specially analog), please remove ux0:data/moonlight/moonlight.conf then reconfigure vita-moonlight.
Configuration and usage:
The very first connection's gonna take a long time due to the process of generating certificates.
server.txt and config.txt aren't needed anymore - everything is done from within the app.
Obviously stream configuration only applied after stream restart, input applied instantly.
If you want to use Vita native resolution (960x544) you need to go to NVIDIA control panel => change resolution and add the resolution manually. (Customize=>Create custom resolution) Also, some games might need additional settings to stream 960x544 (for example, for Portal 2 I had to add -width 960 -height 544 command line options).
Default mapping
- LT/LR/LT/RT - back touchscreen
- Pause stream - front-left corner of front touchscreen
- Special key (XBox key, Guide key) - bottom-left corner of front touchscreen
Remapping
Create folder ux0:data/moonlight/mappings and put mappings/vita.conf there, enable Enable mapping file in the settings.
Example: config file with swapped triggers and bumpers: vita.conf
Special buttons on front touchscreen
Check settings. You can also enter key code manually, check this page to find out the right one. Keep in mind that Alt-Tab or Windows key will not work.
Back touchscreen deadzone
Check settings. For easier configuring menu also visualise touches.
Disabling power save
Enabled by default. Vita will not go to sleep when stream is running.
Known issues:
- Unpair not working
- Crash on "Quit" when the stream is running
- Sometimes, when minimising the app, vita display hangs
- Full list...
Credits:
Fourth vita alpha
New features in alpha 4:
- GUI
- Control scheme remapping
- Configurable front touchscreen buttons
- Configurable back touchscreen deadzone
- Option to disable power save
- Default config (now in
ux0:data/moonlight/moonlight.conf)
Configuration and usage:
The very first connection's gonna take a long time due to the process of generating certificates.
server.txt and config.txt aren't needed anymore - everything is done from within the app.
Obviously stream configuration only applied after stream restart, input applied instantly.
If you want to use Vita native resolution (960x544) you need to go to NVIDIA control panel => change resolution and add the resolution manually. (Customize=>Create custom resolution) Also, some games might need additional settings to stream 960x544 (for example, for Portal 2 I had to add -width 960 -height 544 command line options).
Default mapping
- LT/LR/LT/RT - back touchscreen
- Pause stream - front-left corner of front touchscreen
- Special key (XBox key, Guide key) - bottom-left corner of front touchscreen
Remapping
Create folder ux0:data/moonlight/mappings and put mappings/vita.conf there, enable Enable mapping file in the settings.
Example: config file with swapped triggers and bumpers: vita.conf
Special buttons on front touchscreen
Check settings. You can also enter key code manually, check this page to find out the right one. Keep in mind that Alt-Tab or Windows key will not work.
Back touchscreen deadzone
Check settings. For easier configuring menu also visualise touches.
Disabling power save
Enabled by default. Vita will not go to sleep when stream is running.
Known issues:
- Unpair not working
- "Connecting to .." or "Stream starting ..." hangs application after reconnect
- Crash on "Quit" when the stream is running
- Sometimes, when minimising the app, vita display hangs
- "Connecting to ..." hangs application
- Moonlight not working with Geforce Experience 3.x
- Full list...
Credits:
- @xyzz: original vita port
- @shadowprince: GUI and input stuff
- @d3m3vilurr: input, refactoring and power save
Third vita alpha
Thanks to @d3m3vilurr there's now support for mouse and L2/R2/L3/R3.
Use front touchscreen for mouse movements and actions:
- left click - one finger tap
- right click - two finger tap
- pointer move - one finger swipe
- scroll - two finger swipe
Use back touchscreen for L2/R2/L3/R3. The zone mappings are:
- L2(LT): left-top
- R2(RT): right-top
- L3(LS CLK): left-botton
- R3(RS CLK): right-bottom
Config instructions:
Before you launch the bubble, create ux0:data/moonlight/server.txt and type in your server IP address (e.g. 192.168.140.1)
Place an additional configuration file to ux0:data/moonlight/settings.txt.
In that file you write four numbers: stream width, height, FPS and bitrate. So the file might look like this:
1280 720 30 2000
for 1280x720 30 FPS and 2000 kbps bitrate
960 544 60 4000
for 960x544 60 FPS and 4000 kbps bitrate
If you want to use Vita native resolution (960x544) you need to go to NVIDIA control panel => change resolution and add the resolution manually. (Customize=>Create custom resolution) Also, some games might need additional settings to stream 960x544 (for example, for Portal 2 I had to add -width 960 -height 544 command line options).
Second vita alpha
For this version, you need to place an additional configuration file to ux0:data/moonlight/settings.txt
In that file you write four numbers: stream width, height, FPS and bitrate. So the file might look like this:
1280 720 30 2000
for 1280x720 30 FPS and 2000 kbps bitrate
960 544 60 4000
for 960x544 60 FPS and 4000 kbps bitrate
If you want to use Vita native resolution (960x544) you need to go to NVIDIA control panel => change resolution and add the resolution manually. (Customize=>Create custom resolution) Also, some games might need additional settings to stream 960x544 (for example, for Portal 2 I had to add -width 960 -height 544 command line options).
Vita Alpha
https://www.reddit.com/r/vitahacks/comments/4xtjrk/release_vita_moonlight_alpha/
Video: https://www.youtube.com/watch?v=obSYWSYZ6z4
This is a super pre-alpha. What works:
- Initial setup and pairing
- Starting steam
- Input
- 30fps
What's missing:
- Sound
- Proper UI
- Starting apps other than steam
- 60fps :( (already implemented, but I don't want to build another set of .vpk's -- it'd be better if somebody wrote a proper configurable UI)
There are two vpk files available: moonlight-2000.vpk uses 2000 kbps, moonlight-5000.vpk uses 5000 kbps. If the 5000 version stutters for you, try the 2000 one, if the 2000 one looks too crappy, try the 5000 one.
Before you launch the bubble, create ux0:data/moonlight/server.txt using FTP and type in your server IP address (e.g. 192.168.140.1)
If the app freezes (most often happens on a GET request), just restart the bubble.
EDIT: please note that I won't have much time to develop and support this port over the next few weeks/months. I hope somebody else can pick it up and add the missing features.
EDIT2: I've updated the release with a new version that shouldn't crash that much, please redownload and reinstall the .vpk files.