farsi_gen.cfg

# Cache size
//-size (bytes) 2048
//-size (bytes) 4096
//-size (bytes) 32768
//-size (bytes) 131072
//-size (bytes) 262144
//-size (bytes) 1048576
//-size (bytes) 2097152
//-size (bytes) 4194304
//-size (bytes) 8388608
//-size (bytes) 16777216
//-size (bytes) 33554432
//-size (bytes) 134217728
//-size (bytes) 67108864
//-size (bytes) 1073741824

# power gating
-Array Power Gating - "false"
-WL Power Gating - "false"
-CL Power Gating - "false"
-Bitline floating - "false"
-Interconnect Power Gating - "false"
-Power Gating Performance Loss 0.01

# Line size
-block size (bytes) 32
//-block size (bytes) 64

# To model Fully Associative cache, set associativity to zero
//-associativity 0
-associativity 2
//-associativity 4
//-associativity 8
//-associativity 8

-read-write port 1
-exclusive read port 0
-exclusive write port 0
-single ended read ports 0

# Multiple banks connected using a bus
-UCA bank count 1
//-technology (u) 0.022
-technology (u) 0.040
//-technology (u) 0.032
//-technology (u) 0.090

# following three parameters are meaningful only for main memories

-page size (bits) 1024
-burst length 4
-internal prefetch width 8

# following parameter can have one of five values -- (itrs-hp, itrs-lstp, itrs-lop, lp-dram, comm-dram)
//-Data array cell type - "itrs-hp"
//-Data array cell type - "itrs-lstp"
//-Data array cell type - "itrs-lop"

# following parameter can have one of three values -- (itrs-hp, itrs-lstp, itrs-lop)
-Data array peripheral type - "itrs-hp"
//-Data array peripheral type - "itrs-lstp"
//-Data array peripheral type - "itrs-lop"

# following parameter can have one of five values -- (itrs-hp, itrs-lstp, itrs-lop, lp-dram, comm-dram)
-Tag array cell type - "itrs-hp"
//-Tag array cell type - "itrs-lstp"
//-Tag array cell type - "itrs-lop"

# following parameter can have one of three values -- (itrs-hp, itrs-lstp, itrs-lop)
-Tag array peripheral type - "itrs-hp"
//-Tag array peripheral type - "itrs-lstp"
//-Tag array peripheral type - "itrs-lop

# Bus width include data bits and address bits required by the decoder
//-output/input bus width 16
-output/input bus width 128

// 300-400 in steps of 10
-operating temperature (K) 360

# Type of memory - cache (with a tag array) or ram (scratch ram similar to a register file) 
# or main memory (no tag array and every access will happen at a page granularity Ref: CACTI 5.3 report)
//-cache type "cache"
//-cache type "ram"
//-cache type "main memory"

# to model special structure like branch target buffers, directory, etc. 
# change the tag size parameter
# if you want cacti to calculate the tagbits, set the tag size to "default"
-tag size (b) "default"
//-tag size (b) 22

# fast - data and tag access happen in parallel
# sequential - data array is accessed after accessing the tag array
# normal - data array lookup and tag access happen in parallel
#          final data block is broadcasted in data array h-tree 
#          after getting the signal from the tag array
//-access mode (normal, sequential, fast) - "fast"
-access mode (normal, sequential, fast) - "normal"
//-access mode (normal, sequential, fast) - "sequential"


# DESIGN OBJECTIVE for UCA (or banks in NUCA)
-design objective (weight delay, dynamic power, leakage power, cycle time, area) 0:0:0:100:0

# Percentage deviation from the minimum value 
# Ex: A deviation value of 10:1000:1000:1000:1000 will try to find an organization
# that compromises at most 10% delay. 
# NOTE: Try reasonable values for % deviation. Inconsistent deviation
# percentage values will not produce any valid organizations. For example,
# 0:0:100:100:100 will try to identify an organization that has both
# least delay and dynamic power. Since such an organization is not possible, CACTI will
# throw an error. Refer CACTI-6 Technical report for more details
-deviate (delay, dynamic power, leakage power, cycle time, area) 20:100000:100000:100000:100000

# Objective for NUCA
-NUCAdesign objective (weight delay, dynamic power, leakage power, cycle time, area) 100:100:0:0:100
-NUCAdeviate (delay, dynamic power, leakage power, cycle time, area) 10:10000:10000:10000:10000

# Set optimize tag to ED or ED^2 to obtain a cache configuration optimized for
# energy-delay or energy-delay sq. product
# Note: Optimize tag will disable weight or deviate values mentioned above
# Set it to NONE to let weight and deviate values determine the 
# appropriate cache configuration
//-Optimize ED or ED^2 (ED, ED^2, NONE): "ED"
-Optimize ED or ED^2 (ED, ED^2, NONE): "ED^2"
//-Optimize ED or ED^2 (ED, ED^2, NONE): "NONE"

-Cache model (NUCA, UCA)  - "UCA"
//-Cache model (NUCA, UCA)  - "NUCA"

# In order for CACTI to find the optimal NUCA bank value the following
# variable should be assigned 0.
-NUCA bank count 0

# NOTE: for nuca network frequency is set to a default value of 
# 5GHz in time.c. CACTI automatically
# calculates the maximum possible frequency and downgrades this value if necessary

# By default CACTI considers both full-swing and low-swing 
# wires to find an optimal configuration. However, it is possible to 
# restrict the search space by changing the signaling from "default" to 
# "fullswing" or "lowswing" type.
-Wire signaling (fullswing, lowswing, default) - "Global_30"
//-Wire signaling (fullswing, lowswing, default) - "default"
//-Wire signaling (fullswing, lowswing, default) - "lowswing"

//-Wire inside mat - "global"
-Wire inside mat - "semi-global"
//-Wire outside mat - "global"
-Wire outside mat - "semi-global"

-Interconnect projection - "conservative"
//-Interconnect projection - "aggressive"

# Contention in network (which is a function of core count and cache level) is one of
# the critical factor used for deciding the optimal bank count value
# core count can be 4, 8, or 16
//-Core count 4
-Core count 8
//-Core count 16
-Cache level (L2/L3) - "L3"

-Add ECC - "true"

//-Print level (DETAILED, CONCISE) - "CONCISE"
-Print level (DETAILED, CONCISE) - "DETAILED"

# for debugging
//-Print input parameters - "true"
-Print input parameters - "false"
# force CACTI to model the cache with the 
# following Ndbl, Ndwl, Nspd, Ndsam,
# and Ndcm values
//-Force cache config - "true"
-Force cache config - "false"
-Ndwl 1
-Ndbl 1
-Nspd 0
-Ndcm 1
-Ndsam1 0
-Ndsam2 0



#### Default CONFIGURATION values for baseline external IO parameters to DRAM. More details can be found in the CACTI-IO technical report (), especially Chapters 2 and 3.

# Memory Type (D=DDR3, L=LPDDR2, W=WideIO). Additional memory types can be defined by the user in extio_technology.cc, along with their technology and configuration parameters.

-dram_type "D"
//-dram_type "L"
//-dram_type "W"
//-dram_type "S"

# Memory State (R=Read, W=Write, I=Idle  or S=Sleep) 

//-iostate  "R"
-iostate "W"
//-iostate "I"
//-iostate "S"

#Address bus timing. To alleviate the timing on the command and address bus due to high loading (shared across all memories on the channel), the interface allows for multi-cycle timing options. 

-addr_timing 0.5 //DDR
//-addr_timing 1.0 //SDR (half of DQ rate)
//-addr_timing 2.0 //2T timing (One fourth of DQ rate)
//-addr_timing 3.0 // 3T timing (One sixth of DQ rate)

# Memory Density (Gbit per memory/DRAM die)

-mem_density 8 Gb //Valid values 2^n Gb

# IO frequency (MHz) (frequency of the external memory interface).

-bus_freq 100 MHz //As of current memory standards (2013), valid range 0 to 1.5 GHz for DDR3, 0 to 533 MHz for LPDDR2, 0 - 800 MHz for WideIO and 0 - 3 GHz for Low-swing differential. However this can change, and the user is free to define valid ranges based on new memory types or extending beyond existing standards for existing dram types.

# Duty Cycle (fraction of time in the Memory State defined above)

-duty_cycle 1.0 //Valid range 0 to 1.0

# Activity factor for Data (0->1 transitions) per cycle (for DDR, need to account for the higher activity in this parameter. E.g. max. activity factor for DDR is 1.0, for SDR is 0.5)
 
-activity_dq 1.0 //Valid range 0 to 1.0 for DDR, 0 to 0.5 for SDR
#-activity_dq .50 //Valid range 0 to 1.0 for DDR, 0 to 0.5 for SDR

# Activity factor for Control/Address (0->1 transitions) per cycle (for DDR, need to account for the higher activity in this parameter. E.g. max. activity factor for DDR is 1.0, for SDR is 0.5)

-activity_ca 1.0 //Valid range 0 to 1.0 for DDR, 0 to 0.5 for SDR, 0 to 0.25 for 2T, and 0 to 0.17 for 3T
#-activity_ca 0.25 //Valid range 0 to 1.0 for DDR, 0 to 0.5 for SDR, 0 to 0.25 for 2T, and 0 to 0.17 for 3T

# Number of DQ pins 

-num_dq 72 //Number of DQ pins. Includes ECC pins.

# Number of DQS pins. DQS is a data strobe that is sent along with a small number of data-lanes so the source synchronous timing is local to these DQ bits. Typically, 1 DQS per byte (8 DQ bits) is used. The DQS is also typucally differential, just like the CLK pin. 

-num_dqs 36 //2 x differential pairs. Include ECC pins as well. Valid range 0 to 18. For x4 memories, could have 36 DQS pins.

# Number of CA pins 

-num_ca 35 //Valid range 0 to 35 pins.
#-num_ca 25 //Valid range 0 to 35 pins.

# Number of CLK pins. CLK is typically a differential pair. In some cases additional CLK pairs may be used to limit the loading on the CLK pin. 

-num_clk  2 //2 x differential pair. Valid values: 0/2/4.

# Number of Physical Ranks

-num_mem_dq 2 //Number of ranks (loads on DQ and DQS) per buffer/register. If multiple LRDIMMs or buffer chips exist, the analysis for capacity and power is reported per buffer/register. 

# Width of the Memory Data Bus

-mem_data_width 32 //x4 or x8 or x16 or x32 memories. For WideIO upto x128.