From 5f39baa03a3f20c14fa3906dea602e9bfd074c3c Mon Sep 17 00:00:00 2001 From: Johann Fischer Date: Thu, 7 Nov 2024 23:36:32 +0100 Subject: [PATCH] boards: use board common CDC ACM UART configuration Remove all USB and CDC ACM configuration in favor of common configuraiton. Do not adapt board-specific configurations such as unknown PID/VID or string descriptors. There is no justification for using them on specific boards, and we do not have formal approval to use them in the project tree. Also, we need more uniform configuration, since the main reason for enabling CDC ACM here is to allow users to run examples like hello_world right out of the box. Of course, anyone is free to customize these settings in their fork or downstream project. Signed-off-by: Johann Fischer --- .../feather_nrf52840/Kconfig.defconfig | 6 ++ ...it_feather_nrf52840_nrf52840_sense_uf2.dts | 15 +---- ...ther_nrf52840_nrf52840_sense_uf2_defconfig | 6 -- ...adafruit_feather_nrf52840_nrf52840_uf2.dts | 15 +---- ...it_feather_nrf52840_nrf52840_uf2_defconfig | 6 -- boards/adafruit/itsybitsy/Kconfig | 9 --- boards/adafruit/itsybitsy/Kconfig.defconfig | 42 +------------- .../itsybitsy/adafruit_itsybitsy_nrf52840.dts | 11 +--- boards/arduino/opta/Kconfig.defconfig | 30 +--------- .../opta/arduino_opta_stm32h747xx_m7.dts | 14 +---- .../arduino_opta_stm32h747xx_m7_defconfig | 5 +- boards/arduino/portenta_h7/Kconfig.defconfig | 30 +--------- .../arduino_portenta_h7-common.dtsi | 3 - .../arduino_portenta_h7_stm32h747xx_m7.dts | 8 +-- ...duino_portenta_h7_stm32h747xx_m7_defconfig | 3 - .../atmarktechno/degu_evk/Kconfig.defconfig | 25 +-------- boards/atmarktechno/degu_evk/degu_evk.dts | 8 +-- .../atmarktechno/degu_evk/degu_evk_defconfig | 3 - boards/croxel/croxel_cx1825/Kconfig.defconfig | 9 +-- .../croxel_cx1825/croxel_cx1825_nrf52840.dts | 8 +-- .../croxel_cx1825_nrf52840_defconfig | 5 -- boards/ct/ctcc/Kconfig | 9 --- boards/ct/ctcc/Kconfig.defconfig | 47 +--------------- boards/ct/ctcc/ctcc_nrf52840.dts | 11 +--- boards/ezurio/bl654_usb/Kconfig | 10 ---- boards/ezurio/bl654_usb/Kconfig.defconfig | 28 +--------- boards/ezurio/bl654_usb/bl654_usb.dts | 9 +-- boards/ezurio/bl654_usb/bl654_usb_defconfig | 3 - .../nrf52840_mdk_usb_dongle/Kconfig | 5 +- .../nrf52840_mdk_usb_dongle/Kconfig.defconfig | 8 +-- .../nrf52840_mdk_usb_dongle.dts | 7 +-- .../mikroe/stm32_m4_clicker/Kconfig.defconfig | 18 +----- .../mikroe_stm32_m4_clicker.dts | 8 +-- .../mikroe_stm32_m4_clicker_defconfig | 3 - boards/nordic/nrf52840dongle/Kconfig | 4 -- .../nordic/nrf52840dongle/Kconfig.defconfig | 55 +------------------ .../nrf52840dongle_nrf52840.dts | 11 +--- boards/nordic/thingy53/Kconfig | 4 -- boards/nordic/thingy53/Kconfig.defconfig | 53 +----------------- .../thingy53/thingy53_nrf5340_common.dtsi | 9 --- .../thingy53/thingy53_nrf5340_cpuapp.dts | 1 + .../thingy53/thingy53_nrf5340_cpuapp_ns.dts | 2 + boards/seeed/wio_terminal/Kconfig.defconfig | 2 + boards/seeed/wio_terminal/wio_terminal.dts | 8 +-- .../seeed/wio_terminal/wio_terminal_defconfig | 13 ----- boards/seeed/xiao_ble/Kconfig.defconfig | 10 +--- boards/seeed/xiao_ble/xiao_ble_common.dtsi | 11 +--- boards/seeed/xiao_ble/xiao_ble_defconfig | 6 -- .../xiao_ble_nrf52840_sense_defconfig | 6 -- boards/st/sensortile_box_pro/Kconfig | 12 ---- .../st/sensortile_box_pro/Kconfig.defconfig | 46 +--------------- boards/st/sensortile_box_pro/doc/index.rst | 19 +------ .../sensortile_box_pro/sensortile_box_pro.dts | 9 +-- boards/st/steval_stwinbx1/Kconfig | 12 ---- boards/st/steval_stwinbx1/Kconfig.defconfig | 46 +--------------- boards/st/steval_stwinbx1/doc/index.rst | 18 +----- boards/st/steval_stwinbx1/steval_stwinbx1.dts | 9 +-- boards/weact/mini_stm32h743/Kconfig.defconfig | 10 +--- .../weact/mini_stm32h743/mini_stm32h743.dts | 8 +-- .../mini_stm32h743/mini_stm32h743_defconfig | 6 -- 60 files changed, 70 insertions(+), 747 deletions(-) delete mode 100644 boards/adafruit/itsybitsy/Kconfig delete mode 100644 boards/ct/ctcc/Kconfig delete mode 100644 boards/ezurio/bl654_usb/Kconfig delete mode 100644 boards/st/sensortile_box_pro/Kconfig delete mode 100644 boards/st/steval_stwinbx1/Kconfig diff --git a/boards/adafruit/feather_nrf52840/Kconfig.defconfig b/boards/adafruit/feather_nrf52840/Kconfig.defconfig index bf56a00eebbc1d8..f6351510d2f3cc8 100644 --- a/boards/adafruit/feather_nrf52840/Kconfig.defconfig +++ b/boards/adafruit/feather_nrf52840/Kconfig.defconfig @@ -6,4 +6,10 @@ if BOARD_ADAFRUIT_FEATHER_NRF52840 +if BOARD_ADAFRUIT_FEATHER_NRF52840_NRF52840_UF2 || BOARD_ADAFRUIT_FEATHER_NRF52840_NRF52840_SENSE_UF2 + +source "boards/common/usb/Kconfig.cdc_acm_serial.defconfig" + +endif + endif # BOARD_ADAFRUIT_FEATHER_NRF52840 diff --git a/boards/adafruit/feather_nrf52840/adafruit_feather_nrf52840_nrf52840_sense_uf2.dts b/boards/adafruit/feather_nrf52840/adafruit_feather_nrf52840_nrf52840_sense_uf2.dts index 719577abc0d447f..faafb8381feb4ec 100644 --- a/boards/adafruit/feather_nrf52840/adafruit_feather_nrf52840_nrf52840_sense_uf2.dts +++ b/boards/adafruit/feather_nrf52840/adafruit_feather_nrf52840_nrf52840_sense_uf2.dts @@ -8,19 +8,12 @@ /dts-v1/; #include "adafruit_feather_nrf52840_common.dtsi" #include +#include <../boards/common/usb/cdc_acm_serial.dtsi> / { model = "Adafruit Feather nRF52840 Sense"; compatible = "adafruit,feather-nrf52840-sense-uf2"; - chosen { - zephyr,console = &cdc_acm_uart0; - zephyr,shell-uart = &cdc_acm_uart0; - zephyr,uart-mcumgr = &cdc_acm_uart0; - zephyr,bt-mon-uart = &cdc_acm_uart0; - zephyr,bt-c2h-uart = &cdc_acm_uart0; - }; - leds { led0: led_0 { gpios = <&gpio1 9 0>; @@ -34,9 +27,3 @@ reg = <0x44>; }; }; - -zephyr_udc0: &usbd { - cdc_acm_uart0: cdc_acm_uart0 { - compatible = "zephyr,cdc-acm-uart"; - }; -}; diff --git a/boards/adafruit/feather_nrf52840/adafruit_feather_nrf52840_nrf52840_sense_uf2_defconfig b/boards/adafruit/feather_nrf52840/adafruit_feather_nrf52840_nrf52840_sense_uf2_defconfig index 18c22c337d08d10..42f7298af555a96 100644 --- a/boards/adafruit/feather_nrf52840/adafruit_feather_nrf52840_nrf52840_sense_uf2_defconfig +++ b/boards/adafruit/feather_nrf52840/adafruit_feather_nrf52840_nrf52840_sense_uf2_defconfig @@ -17,11 +17,5 @@ CONFIG_UART_CONSOLE=y CONFIG_CLOCK_CONTROL_NRF_K32SRC_RC=y CONFIG_CLOCK_CONTROL_NRF_K32SRC_500PPM=y -# Logger cannot use itself to log -CONFIG_USB_CDC_ACM_LOG_LEVEL_OFF=y - -# Enable USB -CONFIG_USB_DEVICE_STACK=y - # Build UF2 by default, supported by the Adafruit nRF52 Bootloader CONFIG_BUILD_OUTPUT_UF2=y diff --git a/boards/adafruit/feather_nrf52840/adafruit_feather_nrf52840_nrf52840_uf2.dts b/boards/adafruit/feather_nrf52840/adafruit_feather_nrf52840_nrf52840_uf2.dts index bc4f67a99319090..f4c30d6aec0903f 100644 --- a/boards/adafruit/feather_nrf52840/adafruit_feather_nrf52840_nrf52840_uf2.dts +++ b/boards/adafruit/feather_nrf52840/adafruit_feather_nrf52840_nrf52840_uf2.dts @@ -7,28 +7,15 @@ /dts-v1/; #include "adafruit_feather_nrf52840_common.dtsi" #include +#include <../boards/common/usb/cdc_acm_serial.dtsi> / { model = "Adafruit Feather nRF52840 Express"; compatible = "adafruit,feather-nrf52840-uf2"; - chosen { - zephyr,console = &cdc_acm_uart0; - zephyr,shell-uart = &cdc_acm_uart0; - zephyr,uart-mcumgr = &cdc_acm_uart0; - zephyr,bt-mon-uart = &cdc_acm_uart0; - zephyr,bt-c2h-uart = &cdc_acm_uart0; - }; - leds { led0: led_0 { gpios = <&gpio1 15 0>; }; }; }; - -zephyr_udc0: &usbd { - cdc_acm_uart0: cdc_acm_uart0 { - compatible = "zephyr,cdc-acm-uart"; - }; -}; diff --git a/boards/adafruit/feather_nrf52840/adafruit_feather_nrf52840_nrf52840_uf2_defconfig b/boards/adafruit/feather_nrf52840/adafruit_feather_nrf52840_nrf52840_uf2_defconfig index f6ec20976464845..a40094157e3ff7a 100644 --- a/boards/adafruit/feather_nrf52840/adafruit_feather_nrf52840_nrf52840_uf2_defconfig +++ b/boards/adafruit/feather_nrf52840/adafruit_feather_nrf52840_nrf52840_uf2_defconfig @@ -13,11 +13,5 @@ CONFIG_SERIAL=y CONFIG_CONSOLE=y CONFIG_UART_CONSOLE=y -# Logger cannot use itself to log -CONFIG_USB_CDC_ACM_LOG_LEVEL_OFF=y - -# Enable USB -CONFIG_USB_DEVICE_STACK=y - # Build UF2 by default, supported by the Adafruit nRF52 Bootloader CONFIG_BUILD_OUTPUT_UF2=y diff --git a/boards/adafruit/itsybitsy/Kconfig b/boards/adafruit/itsybitsy/Kconfig deleted file mode 100644 index 8aa3368ffd68e33..000000000000000 --- a/boards/adafruit/itsybitsy/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -# Adafruit ItsyBitsy nRF52840 Express board configuration - -# Copyright (c) 2022 Embla Flatlandsmo -# SPDX-License-Identifier: Apache-2.0 - -config BOARD_SERIAL_BACKEND_CDC_ACM - bool "USB CDC" - default y - depends on BOARD_ADAFRUIT_ITSYBITSY diff --git a/boards/adafruit/itsybitsy/Kconfig.defconfig b/boards/adafruit/itsybitsy/Kconfig.defconfig index 7f71d774acf443a..02cbfc35fe2cb65 100644 --- a/boards/adafruit/itsybitsy/Kconfig.defconfig +++ b/boards/adafruit/itsybitsy/Kconfig.defconfig @@ -5,46 +5,6 @@ if BOARD_ADAFRUIT_ITSYBITSY -if BOARD_SERIAL_BACKEND_CDC_ACM - -config USB_DEVICE_STACK - default y - -config USB_CDC_ACM - default SERIAL - -config UART_CONSOLE - default CONSOLE - -config USB_DEVICE_INITIALIZE_AT_BOOT - default y if CONSOLE - -config SHELL_BACKEND_SERIAL_CHECK_DTR - default SHELL - depends on UART_LINE_CTRL - -config UART_LINE_CTRL - default SHELL - -config USB_DEVICE_REMOTE_WAKEUP - default n - -if LOG - -# Logger cannot use itself to log -config USB_CDC_ACM_LOG_LEVEL - default 0 - -# Set USB log level to error only -config USB_DEVICE_LOG_LEVEL - default 1 - -# Wait 1500ms at startup for logging -config LOG_PROCESS_THREAD_STARTUP_DELAY_MS - default 1500 - -endif # LOG - -endif # BOARD_SERIAL_BACKEND_CDC_ACM +source "boards/common/usb/Kconfig.cdc_acm_serial.defconfig" endif # BOARD_ADAFRUIT_ITSYBITSY diff --git a/boards/adafruit/itsybitsy/adafruit_itsybitsy_nrf52840.dts b/boards/adafruit/itsybitsy/adafruit_itsybitsy_nrf52840.dts index ee74d8869400710..a4ff029e93b9659 100644 --- a/boards/adafruit/itsybitsy/adafruit_itsybitsy_nrf52840.dts +++ b/boards/adafruit/itsybitsy/adafruit_itsybitsy_nrf52840.dts @@ -16,11 +16,6 @@ compatible = "adafruit,itsybitsy-nrf52840"; chosen { - zephyr,console = &cdc_acm_uart0; - zephyr,shell-uart = &cdc_acm_uart0; - zephyr,uart-mcumgr = &cdc_acm_uart0; - zephyr,bt-mon-uart = &cdc_acm_uart0; - zephyr,bt-c2h-uart = &cdc_acm_uart0; zephyr,ieee802154 = &ieee802154; }; @@ -155,8 +150,6 @@ zephyr_udc0: &usbd { compatible = "nordic,nrf-usbd"; status = "okay"; - - cdc_acm_uart0: cdc_acm_uart0 { - compatible = "zephyr,cdc-acm-uart"; - }; }; + +#include <../boards/common/usb/cdc_acm_serial.dtsi> diff --git a/boards/arduino/opta/Kconfig.defconfig b/boards/arduino/opta/Kconfig.defconfig index 1a89b70db5c08ac..6199be7debe885d 100644 --- a/boards/arduino/opta/Kconfig.defconfig +++ b/boards/arduino/opta/Kconfig.defconfig @@ -11,34 +11,10 @@ config NET_L2_ETHERNET endif # NETWORKING -if USB_DEVICE_STACK +if BOARD_ARDUINO_OPTA_STM32H747XX_M7 -config USB_DEVICE_PRODUCT - default "Arduino Opta" +source "boards/common/usb/Kconfig.cdc_acm_serial.defconfig" -config USB_DEVICE_PID - default 0x0164 - -config USB_DEVICE_VID - default 0x35d1 - -config USB_DEVICE_INITIALIZE_AT_BOOT - default y - -if LOG - -# Logger cannot use itself to log -choice USB_CDC_ACM_LOG_LEVEL_CHOICE - default USB_CDC_ACM_LOG_LEVEL_OFF -endchoice - -# Set USB log level to error only -choice USB_DEVICE_LOG_LEVEL_CHOICE - default USB_DEVICE_LOG_LEVEL_ERR -endchoice - -endif # LOG - -endif # USB_DEVICE_STACK +endif # BOARD_ARDUINO_OPTA_STM32H747XX_M7 endif # BOARD_ARDUINO_OPTA diff --git a/boards/arduino/opta/arduino_opta_stm32h747xx_m7.dts b/boards/arduino/opta/arduino_opta_stm32h747xx_m7.dts index cc408d4daf2077b..d1b63e91e52cf53 100644 --- a/boards/arduino/opta/arduino_opta_stm32h747xx_m7.dts +++ b/boards/arduino/opta/arduino_opta_stm32h747xx_m7.dts @@ -16,9 +16,6 @@ compatible = "arduino,opta-m7"; chosen { - zephyr,console = &cdc_acm_uart0; - zephyr,shell-uart = &cdc_acm_uart0; - zephyr,cdc-acm-uart0 = &cdc_acm_uart0; zephyr,sram = &sram0; zephyr,flash = &flash0; zephyr,code-partition = &slot0_partition; @@ -29,12 +26,10 @@ zephyr_udc0: &usbotg_fs { pinctrl-0 = <&usb_otg_fs_dm_pa11 &usb_otg_fs_dp_pa12>; pinctrl-names = "default"; status = "okay"; - - cdc_acm_uart0: cdc_acm_uart0 { - compatible = "zephyr,cdc-acm-uart"; - }; }; +#include <../boards/common/usb/cdc_acm_serial.dtsi> + &clk_hse { clock-frequency = ; hse-bypass; @@ -126,8 +121,3 @@ zephyr_udc0: &usbotg_fs { status = "okay"; }; }; - -/* Assign USB serial (ACM) to M7 to have a working console out of the box */ -&cdc_acm_uart0 { - status = "okay"; -}; diff --git a/boards/arduino/opta/arduino_opta_stm32h747xx_m7_defconfig b/boards/arduino/opta/arduino_opta_stm32h747xx_m7_defconfig index 7440b2163e3331b..4d23418db588001 100644 --- a/boards/arduino/opta/arduino_opta_stm32h747xx_m7_defconfig +++ b/boards/arduino/opta/arduino_opta_stm32h747xx_m7_defconfig @@ -28,5 +28,6 @@ CONFIG_SERIAL=y CONFIG_CONSOLE=y CONFIG_UART_CONSOLE=y -# Enable USB Stack (needed for the console to work) -CONFIG_USB_DEVICE_STACK=y +# Enable regulator (needed to enable eth) +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED=y diff --git a/boards/arduino/portenta_h7/Kconfig.defconfig b/boards/arduino/portenta_h7/Kconfig.defconfig index 002ff75b5a551b0..c5ae009ae310379 100644 --- a/boards/arduino/portenta_h7/Kconfig.defconfig +++ b/boards/arduino/portenta_h7/Kconfig.defconfig @@ -10,34 +10,10 @@ config NET_L2_ETHERNET endif # NETWORKING -if USB_DEVICE_STACK +if BOARD_ARDUINO_PORTENTA_H7_STM32H747XX_M7 -config USB_DEVICE_PRODUCT - default "Arduino SA Portenta H7" +source "boards/common/usb/Kconfig.cdc_acm_serial.defconfig" -config USB_DEVICE_PID - default 0x035b - -config USB_DEVICE_VID - default 0x2341 - -config USB_DEVICE_INITIALIZE_AT_BOOT - default y - -if LOG - -# Logger cannot use itself to log -choice USB_CDC_ACM_LOG_LEVEL_CHOICE - default USB_CDC_ACM_LOG_LEVEL_OFF -endchoice - -# Set USB log level to error only -choice USB_DEVICE_LOG_LEVEL_CHOICE - default USB_DEVICE_LOG_LEVEL_ERR -endchoice - -endif # LOG - -endif # USB_DEVICE_STACK +endif # BOARD_ARDUINO_PORTENTA_H7_STM32H747XX_M7 endif # BOARD_ARDUINO_PORTENTA_H7 diff --git a/boards/arduino/portenta_h7/arduino_portenta_h7-common.dtsi b/boards/arduino/portenta_h7/arduino_portenta_h7-common.dtsi index e030d9d1cd0562e..7a61e830e52677a 100644 --- a/boards/arduino/portenta_h7/arduino_portenta_h7-common.dtsi +++ b/boards/arduino/portenta_h7/arduino_portenta_h7-common.dtsi @@ -243,7 +243,4 @@ zephyr_udc0: &usbotg_hs { <&rcc STM32_SRC_HSI48 USB_SEL(3)>; num-bidir-endpoints = < 4 >; status = "okay"; - cdc_acm_uart0: cdc_acm_uart0 { - compatible = "zephyr,cdc-acm-uart"; - }; }; diff --git a/boards/arduino/portenta_h7/arduino_portenta_h7_stm32h747xx_m7.dts b/boards/arduino/portenta_h7/arduino_portenta_h7_stm32h747xx_m7.dts index 30b5b06db272058..e6359d3a074fe5d 100644 --- a/boards/arduino/portenta_h7/arduino_portenta_h7_stm32h747xx_m7.dts +++ b/boards/arduino/portenta_h7/arduino_portenta_h7_stm32h747xx_m7.dts @@ -8,6 +8,7 @@ #include #include #include "arduino_portenta_h7-common.dtsi" +#include <../boards/common/usb/cdc_acm_serial.dtsi> / { model = "Arduino Portenta H7 board"; @@ -15,9 +16,6 @@ /* HW resources are split between CM7 and CM4 */ chosen { - zephyr,console = &cdc_acm_uart0; - zephyr,shell-uart = &cdc_acm_uart0; - zephyr,cdc-acm-uart0 = &cdc_acm_uart0; zephyr,sram = &sram0; zephyr,flash = &flash0; zephyr,code-partition = &slot0_partition; @@ -98,10 +96,6 @@ status = "okay"; }; -&cdc_acm_uart0 { - status = "okay"; -}; - &flash0 { partitions { compatible = "fixed-partitions"; diff --git a/boards/arduino/portenta_h7/arduino_portenta_h7_stm32h747xx_m7_defconfig b/boards/arduino/portenta_h7/arduino_portenta_h7_stm32h747xx_m7_defconfig index 06d55f8db39ac00..acc978d70c9868d 100644 --- a/boards/arduino/portenta_h7/arduino_portenta_h7_stm32h747xx_m7_defconfig +++ b/boards/arduino/portenta_h7/arduino_portenta_h7_stm32h747xx_m7_defconfig @@ -25,6 +25,3 @@ CONFIG_UART_LINE_CTRL=y # Enable regulator CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED=y - -# Enable USB Stack -CONFIG_USB_DEVICE_STACK=y diff --git a/boards/atmarktechno/degu_evk/Kconfig.defconfig b/boards/atmarktechno/degu_evk/Kconfig.defconfig index 286008a36ab97d6..12c29c90ee0ca89 100644 --- a/boards/atmarktechno/degu_evk/Kconfig.defconfig +++ b/boards/atmarktechno/degu_evk/Kconfig.defconfig @@ -5,29 +5,6 @@ if BOARD_DEGU_EVK -if USB_DEVICE_STACK - -config USB_DEVICE_PRODUCT - default "Degu Evaluation Kit" - -config UART_INTERRUPT_DRIVEN - default y - -config UART_LINE_CTRL - default y - -endif # USB_DEVICE_STACK - -if LOG - -# Logger cannot use itself to log -config USB_CDC_ACM_LOG_LEVEL - default 0 - -# Set USB log level to error only -config USB_DEVICE_LOG_LEVEL - default 1 - -endif # LOG +source "boards/common/usb/Kconfig.cdc_acm_serial.defconfig" endif # BOARD_DEGU_EVK diff --git a/boards/atmarktechno/degu_evk/degu_evk.dts b/boards/atmarktechno/degu_evk/degu_evk.dts index e9d579bd3674bdf..82c7b75ba7fd5d9 100644 --- a/boards/atmarktechno/degu_evk/degu_evk.dts +++ b/boards/atmarktechno/degu_evk/degu_evk.dts @@ -16,8 +16,6 @@ chosen { zephyr,sram = &sram0; zephyr,flash = &flash0; - zephyr,console = °u_cdc_acm_uart; - zephyr,shell-uart = °u_cdc_acm_uart; zephyr,code-partition = &slot0_partition; zephyr,ieee802154 = &ieee802154; }; @@ -173,8 +171,6 @@ zephyr_udc0: &usbd { compatible = "nordic,nrf-usbd"; status = "okay"; - - degu_cdc_acm_uart: degu_cdc_acm_uart { - compatible = "zephyr,cdc-acm-uart"; - }; }; + +#include <../boards/common/usb/cdc_acm_serial.dtsi> diff --git a/boards/atmarktechno/degu_evk/degu_evk_defconfig b/boards/atmarktechno/degu_evk/degu_evk_defconfig index ceed266a40205dc..bd22e1dbfde5dc7 100644 --- a/boards/atmarktechno/degu_evk/degu_evk_defconfig +++ b/boards/atmarktechno/degu_evk/degu_evk_defconfig @@ -10,9 +10,6 @@ CONFIG_SERIAL=y CONFIG_CONSOLE=y CONFIG_UART_CONSOLE=y -# Enable USB (for CDC ACM console) -CONFIG_USB_DEVICE_STACK=y - # Additional board options CONFIG_GPIO=y diff --git a/boards/croxel/croxel_cx1825/Kconfig.defconfig b/boards/croxel/croxel_cx1825/Kconfig.defconfig index 04fa79982b296ae..b6f6c5ef704aedd 100644 --- a/boards/croxel/croxel_cx1825/Kconfig.defconfig +++ b/boards/croxel/croxel_cx1825/Kconfig.defconfig @@ -3,13 +3,6 @@ if BOARD_CROXEL_CX1825 -if LOG - -# Logger cannot use itself to log -choice USB_CDC_ACM_LOG_LEVEL_CHOICE - default USB_CDC_ACM_LOG_LEVEL_OFF -endchoice - -endif # LOG +source "boards/common/usb/Kconfig.cdc_acm_serial.defconfig" endif # BOARD_CROXEL_CX1825 diff --git a/boards/croxel/croxel_cx1825/croxel_cx1825_nrf52840.dts b/boards/croxel/croxel_cx1825/croxel_cx1825_nrf52840.dts index 0aaa70158f82226..0dd4d908fa78932 100644 --- a/boards/croxel/croxel_cx1825/croxel_cx1825_nrf52840.dts +++ b/boards/croxel/croxel_cx1825/croxel_cx1825_nrf52840.dts @@ -17,8 +17,6 @@ zephyr,sram = &sram0; zephyr,flash = &flash0; zephyr,code-partition = &slot0_partition; - zephyr,console = &cdc_acm_0; - zephyr,shell-uart = &cdc_acm_0; }; leds { @@ -130,12 +128,10 @@ zephyr_udc0: &usbd { compatible = "nordic,nrf-usbd"; status = "okay"; - - cdc_acm_0: cdc_acm_0 { - compatible = "zephyr,cdc-acm-uart"; - }; }; +#include <../boards/common/usb/cdc_acm_serial.dtsi> + &flash0 { partitions { diff --git a/boards/croxel/croxel_cx1825/croxel_cx1825_nrf52840_defconfig b/boards/croxel/croxel_cx1825/croxel_cx1825_nrf52840_defconfig index 8694d118b007ac3..6a76f262ed3fb3b 100644 --- a/boards/croxel/croxel_cx1825/croxel_cx1825_nrf52840_defconfig +++ b/boards/croxel/croxel_cx1825/croxel_cx1825_nrf52840_defconfig @@ -10,11 +10,6 @@ CONFIG_HW_STACK_PROTECTION=y # enable GPIO CONFIG_GPIO=y -# Assume we start console by default -CONFIG_USB_DEVICE_INITIALIZE_AT_BOOT=y - -# Console over USB CDC-ACM -CONFIG_USB_DEVICE_STACK=y CONFIG_SERIAL=y CONFIG_CONSOLE=y CONFIG_UART_CONSOLE=y diff --git a/boards/ct/ctcc/Kconfig b/boards/ct/ctcc/Kconfig deleted file mode 100644 index 3a7ec750888b58b..000000000000000 --- a/boards/ct/ctcc/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -# CTHINGS.CO Connectivity Card board configuration - -# Copyright (c) 2024 CTHINGS.CO -# SPDX-License-Identifier: Apache-2.0 - -config BOARD_SERIAL_BACKEND_CDC_ACM - bool "USB CDC" - default y - depends on BOARD_CTCC_NRF52840 diff --git a/boards/ct/ctcc/Kconfig.defconfig b/boards/ct/ctcc/Kconfig.defconfig index f7ec48842769857..d25a68aaa86293c 100644 --- a/boards/ct/ctcc/Kconfig.defconfig +++ b/boards/ct/ctcc/Kconfig.defconfig @@ -5,51 +5,6 @@ if BOARD_CTCC_NRF52840 -if BOARD_SERIAL_BACKEND_CDC_ACM - -config USB_DEVICE_STACK - default y - -config USB_CDC_ACM - default SERIAL - -config CONSOLE - default y - -config UART_CONSOLE - default CONSOLE - -config USB_DEVICE_INITIALIZE_AT_BOOT - default y if !MCUBOOT && CONSOLE - -config USB_DEVICE_REMOTE_WAKEUP - default n - -if LOG - -# Turn off logging for USB CDC ACM -choice USB_CDC_ACM_LOG_LEVEL_CHOICE - default USB_CDC_ACM_LOG_LEVEL_OFF -endchoice - -# Turn off logging for USB Device -choice USB_DEVICE_LOG_LEVEL_CHOICE - default USB_DEVICE_LOG_LEVEL_OFF -endchoice - -# Wait 5s at startup for logging -config LOG_PROCESS_THREAD_STARTUP_DELAY_MS - default 5000 - -endif # LOG - -if USB_DEVICE_STACK - -config SERIAL - default y - -endif # USB_DEVICE_STACK - -endif # BOARD_SERIAL_BACKEND_CDC_ACM +source "boards/common/usb/Kconfig.cdc_acm_serial.defconfig" endif # BOARD_CTCC_NRF52840 diff --git a/boards/ct/ctcc/ctcc_nrf52840.dts b/boards/ct/ctcc/ctcc_nrf52840.dts index 13b88e1ee053a25..68e2edccd6f85e5 100644 --- a/boards/ct/ctcc/ctcc_nrf52840.dts +++ b/boards/ct/ctcc/ctcc_nrf52840.dts @@ -12,11 +12,6 @@ compatible = "ct,ctcc-nrf52840"; chosen { - zephyr,console = &cdc_acm_uart; - zephyr,shell-uart = &cdc_acm_uart; - zephyr,uart-mcumgr = &cdc_acm_uart; - zephyr,bt-mon-uart = &cdc_acm_uart; - zephyr,bt-c2h-uart = &cdc_acm_uart; zephyr,sram = &sram0; zephyr,flash = &flash0; zephyr,code-partition = &slot0_partition; @@ -88,8 +83,6 @@ zephyr_udc0: &usbd { compatible = "nordic,nrf-usbd"; status = "okay"; - - cdc_acm_uart: cdc_acm_uart { - compatible = "zephyr,cdc-acm-uart"; - }; }; + +#include <../boards/common/usb/cdc_acm_serial.dtsi> diff --git a/boards/ezurio/bl654_usb/Kconfig b/boards/ezurio/bl654_usb/Kconfig deleted file mode 100644 index c9779a44da9bb5f..000000000000000 --- a/boards/ezurio/bl654_usb/Kconfig +++ /dev/null @@ -1,10 +0,0 @@ -# BL654 USB adapter board configuration - -# Copyright (c) 2021 Laird Connectivity -# SPDX-License-Identifier: Apache-2.0 - -config BL654_USB_SERIAL_BACKEND_CDCACM - bool "Use CDC ACM UART as backend for BL654 USB adapter" - default y if !USB_DEVICE_BLUETOOTH - help - Use CDC ACM UART as backend for console or shell. diff --git a/boards/ezurio/bl654_usb/Kconfig.defconfig b/boards/ezurio/bl654_usb/Kconfig.defconfig index 83f7c2a968a8e81..7b1a677095066b9 100644 --- a/boards/ezurio/bl654_usb/Kconfig.defconfig +++ b/boards/ezurio/bl654_usb/Kconfig.defconfig @@ -25,32 +25,6 @@ config FLASH_LOAD_SIZE default 0xdf000 depends on !USE_DT_CODE_PARTITION -config USB_CDC_ACM - default n if USB_DEVICE_BLUETOOTH - -if BL654_USB_SERIAL_BACKEND_CDCACM - -config UART_CONSOLE - default CONSOLE - -config USB_DEVICE_INITIALIZE_AT_BOOT - default y if !MCUBOOT - -config SHELL_BACKEND_SERIAL_CHECK_DTR - default SHELL - depends on UART_LINE_CTRL - -config UART_LINE_CTRL - default SHELL - -# Logger cannot use itself to log -config USB_CDC_ACM_LOG_LEVEL - default 0 - -# Set USB log level to error only -config USB_DEVICE_LOG_LEVEL - default 1 - -endif #BL654_USB_SERIAL_BACKEND_CDCACM +source "boards/common/usb/Kconfig.cdc_acm_serial.defconfig" endif # BOARD_BL654_USB diff --git a/boards/ezurio/bl654_usb/bl654_usb.dts b/boards/ezurio/bl654_usb/bl654_usb.dts index a6f81f64e616ba0..6ce352bda6d1bdf 100644 --- a/boards/ezurio/bl654_usb/bl654_usb.dts +++ b/boards/ezurio/bl654_usb/bl654_usb.dts @@ -16,9 +16,6 @@ chosen { zephyr,sram = &sram0; zephyr,flash = &flash0; - zephyr,console = &bl654_cdc_acm_uart; - zephyr,shell-uart = &bl654_cdc_acm_uart; - zephyr,bt-c2h-uart = &bl654_cdc_acm_uart; zephyr,code-partition = &slot0_partition; zephyr,ieee802154 = &ieee802154; }; @@ -118,8 +115,6 @@ zephyr_udc0: &usbd { compatible = "nordic,nrf-usbd"; status = "okay"; - - bl654_cdc_acm_uart: bl654_cdc_acm_uart { - compatible = "zephyr,cdc-acm-uart"; - }; }; + +#include <../boards/common/usb/cdc_acm_serial.dtsi> diff --git a/boards/ezurio/bl654_usb/bl654_usb_defconfig b/boards/ezurio/bl654_usb/bl654_usb_defconfig index ba7d61d55be66b3..053eb9dafdbae49 100644 --- a/boards/ezurio/bl654_usb/bl654_usb_defconfig +++ b/boards/ezurio/bl654_usb/bl654_usb_defconfig @@ -13,9 +13,6 @@ CONFIG_CONSOLE=y # Enable GPIO CONFIG_GPIO=y -# Enable USB -CONFIG_USB_DEVICE_STACK=y - # 32KHz clock source CONFIG_CLOCK_CONTROL_NRF_K32SRC_XTAL=y CONFIG_CLOCK_CONTROL_NRF_K32SRC_150PPM=y diff --git a/boards/makerdiary/nrf52840_mdk_usb_dongle/Kconfig b/boards/makerdiary/nrf52840_mdk_usb_dongle/Kconfig index 89dc99d19cc217b..af7fd576a0280f4 100644 --- a/boards/makerdiary/nrf52840_mdk_usb_dongle/Kconfig +++ b/boards/makerdiary/nrf52840_mdk_usb_dongle/Kconfig @@ -4,10 +4,13 @@ # Copyright (c) 2018 Nordic Semiconductor ASA # SPDX-License-Identifier: Apache-2.0 +if BOARD_NRF52840_MDK_USB_DONGLE + config BOARD_HAS_NRF5_BOOTLOADER bool "Board has nRF5 bootloader" default y - depends on BOARD_NRF52840_MDK_USB_DONGLE help If selected, applications are linked so that they can be loaded by Nordic nRF5 bootloader. + +endif # BOARD_NRF52840_MDK_USB_DONGLE diff --git a/boards/makerdiary/nrf52840_mdk_usb_dongle/Kconfig.defconfig b/boards/makerdiary/nrf52840_mdk_usb_dongle/Kconfig.defconfig index ae93b1ed6df3643..5c7419ff43c5a4a 100644 --- a/boards/makerdiary/nrf52840_mdk_usb_dongle/Kconfig.defconfig +++ b/boards/makerdiary/nrf52840_mdk_usb_dongle/Kconfig.defconfig @@ -23,12 +23,6 @@ config FLASH_LOAD_OFFSET default 0x1000 depends on BOARD_HAS_NRF5_BOOTLOADER && !USE_DT_CODE_PARTITION -if USB_DEVICE_STACK - -# Enable UART driver, needed for CDC ACM -config SERIAL - default y - -endif # USB_DEVICE_STACK +source "boards/common/usb/Kconfig.cdc_acm_serial.defconfig" endif # BOARD_NRF52840_MDK_USB_DONGLE diff --git a/boards/makerdiary/nrf52840_mdk_usb_dongle/nrf52840_mdk_usb_dongle.dts b/boards/makerdiary/nrf52840_mdk_usb_dongle/nrf52840_mdk_usb_dongle.dts index 763aebe86e79c81..0c9dd6b44965176 100644 --- a/boards/makerdiary/nrf52840_mdk_usb_dongle/nrf52840_mdk_usb_dongle.dts +++ b/boards/makerdiary/nrf52840_mdk_usb_dongle/nrf52840_mdk_usb_dongle.dts @@ -16,11 +16,6 @@ compatible = "nrf52840_mdk_usb_dongle"; chosen { - zephyr,console = &uart0; - zephyr,shell-uart = &uart0; - zephyr,uart-mcumgr = &uart0; - zephyr,bt-mon-uart = &uart0; - zephyr,bt-c2h-uart = &uart0; zephyr,sram = &sram0; zephyr,flash = &flash0; zephyr,code-partition = &slot0_partition; @@ -128,3 +123,5 @@ zephyr_udc0: &usbd { compatible = "nordic,nrf-usbd"; status = "okay"; }; + +#include <../boards/common/usb/cdc_acm_serial.dtsi> diff --git a/boards/mikroe/stm32_m4_clicker/Kconfig.defconfig b/boards/mikroe/stm32_m4_clicker/Kconfig.defconfig index 082d099f4b8e50b..6caedb91cfcdc78 100644 --- a/boards/mikroe/stm32_m4_clicker/Kconfig.defconfig +++ b/boards/mikroe/stm32_m4_clicker/Kconfig.defconfig @@ -3,22 +3,6 @@ if BOARD_MIKROE_STM32_M4_CLICKER -if USB_DEVICE_STACK - -config UART_CONSOLE - default CONSOLE - -config USB_DEVICE_INITIALIZE_AT_BOOT - default y - -endif # USB_DEVICE_STACK - -if LOG - -# Logger cannot use itself to log -config USB_CDC_ACM_LOG_LEVEL - default 0 - -endif # LOG +source "boards/common/usb/Kconfig.cdc_acm_serial.defconfig" endif # BOARD_MIKROE_STM32_M4_CLICKER diff --git a/boards/mikroe/stm32_m4_clicker/mikroe_stm32_m4_clicker.dts b/boards/mikroe/stm32_m4_clicker/mikroe_stm32_m4_clicker.dts index 648f0da08f1efdc..b6225a2579fddb8 100644 --- a/boards/mikroe/stm32_m4_clicker/mikroe_stm32_m4_clicker.dts +++ b/boards/mikroe/stm32_m4_clicker/mikroe_stm32_m4_clicker.dts @@ -14,8 +14,6 @@ compatible = "st,stm32f415rg"; chosen { - zephyr,console = &usb_cdc_acm_uart; - zephyr,shell-uart = &usb_cdc_acm_uart; zephyr,sram = &sram0; zephyr,flash = &flash0; }; @@ -126,12 +124,10 @@ zephyr_udc0: &usbotg_fs { pinctrl-0 = <&usb_otg_fs_dm_pa11 &usb_otg_fs_dp_pa12>; pinctrl-names = "default"; status = "okay"; - - usb_cdc_acm_uart: cdc_acm_uart { - compatible = "zephyr,cdc-acm-uart"; - }; }; +#include <../boards/common/usb/cdc_acm_serial.dtsi> + mikrobus_spi: &spi2 {}; mikrobus_serial: &usart3 {}; mikrobus_i2c: &i2c2 {}; diff --git a/boards/mikroe/stm32_m4_clicker/mikroe_stm32_m4_clicker_defconfig b/boards/mikroe/stm32_m4_clicker/mikroe_stm32_m4_clicker_defconfig index f964f048f7711e2..549aff1e682df67 100644 --- a/boards/mikroe/stm32_m4_clicker/mikroe_stm32_m4_clicker_defconfig +++ b/boards/mikroe/stm32_m4_clicker/mikroe_stm32_m4_clicker_defconfig @@ -16,6 +16,3 @@ CONFIG_GPIO=y # Enable Clocks CONFIG_CLOCK_CONTROL=y - -# Enable USB -CONFIG_USB_DEVICE_STACK=y diff --git a/boards/nordic/nrf52840dongle/Kconfig b/boards/nordic/nrf52840dongle/Kconfig index b1cb32d2251ef04..c8698ad07011f12 100644 --- a/boards/nordic/nrf52840dongle/Kconfig +++ b/boards/nordic/nrf52840dongle/Kconfig @@ -12,8 +12,4 @@ config BOARD_HAS_NRF5_BOOTLOADER If selected, applications are linked so that they can be loaded by Nordic nRF5 bootloader. -config BOARD_SERIAL_BACKEND_CDC_ACM - bool "USB CDC" - default y - endif # BOARD_NRF52840DONGLE diff --git a/boards/nordic/nrf52840dongle/Kconfig.defconfig b/boards/nordic/nrf52840dongle/Kconfig.defconfig index 0140f3f99d5f8a7..5bdbb6ce63bd5ae 100644 --- a/boards/nordic/nrf52840dongle/Kconfig.defconfig +++ b/boards/nordic/nrf52840dongle/Kconfig.defconfig @@ -22,59 +22,6 @@ config FLASH_LOAD_OFFSET default 0x1000 depends on BOARD_HAS_NRF5_BOOTLOADER && (MCUBOOT || !USE_DT_CODE_PARTITION) -if BOARD_SERIAL_BACKEND_CDC_ACM - -config USB_DEVICE_STACK - default y - -config USB_CDC_ACM - default SERIAL - -config CONSOLE - default y - -config UART_CONSOLE - default CONSOLE - -config USB_DEVICE_INITIALIZE_AT_BOOT - default y if !MCUBOOT && CONSOLE - -config SHELL_BACKEND_SERIAL_CHECK_DTR - default SHELL - depends on UART_LINE_CTRL - -config UART_LINE_CTRL - default SHELL - -config USB_DEVICE_REMOTE_WAKEUP - default n - -if LOG - -# Logger cannot use itself to log -choice USB_CDC_ACM_LOG_LEVEL_CHOICE - default USB_CDC_ACM_LOG_LEVEL_OFF -endchoice - -# Set USB log level to error only -choice USB_DEVICE_LOG_LEVEL_CHOICE - default USB_DEVICE_LOG_LEVEL_ERR -endchoice - -# Wait 4000ms at startup for logging -config LOG_PROCESS_THREAD_STARTUP_DELAY_MS - default 4000 - -endif # LOG - -if USB_DEVICE_STACK - -# Enable UART driver, needed for CDC ACM -config SERIAL - default y - -endif # USB_DEVICE_STACK - -endif # BOARD_SERIAL_BACKEND_CDC_ACM +source "boards/common/usb/Kconfig.cdc_acm_serial.defconfig" endif # BOARD_NRF52840DONGLE diff --git a/boards/nordic/nrf52840dongle/nrf52840dongle_nrf52840.dts b/boards/nordic/nrf52840dongle/nrf52840dongle_nrf52840.dts index 655ef346a6522f0..1f1de703adee9d7 100644 --- a/boards/nordic/nrf52840dongle/nrf52840dongle_nrf52840.dts +++ b/boards/nordic/nrf52840dongle/nrf52840dongle_nrf52840.dts @@ -15,11 +15,6 @@ compatible = "nordic,nrf52840-dongle-nrf52840"; chosen { - zephyr,console = &cdc_acm_uart; - zephyr,shell-uart = &cdc_acm_uart; - zephyr,uart-mcumgr = &cdc_acm_uart; - zephyr,bt-mon-uart = &cdc_acm_uart; - zephyr,bt-c2h-uart = &cdc_acm_uart; zephyr,sram = &sram0; zephyr,flash = &flash0; zephyr,code-partition = &slot0_partition; @@ -188,8 +183,6 @@ zephyr_udc0: &usbd { compatible = "nordic,nrf-usbd"; status = "okay"; - - cdc_acm_uart: cdc_acm_uart { - compatible = "zephyr,cdc-acm-uart"; - }; }; + +#include <../boards/common/usb/cdc_acm_serial.dtsi> diff --git a/boards/nordic/thingy53/Kconfig b/boards/nordic/thingy53/Kconfig index 01b2ee7dfcff0ac..a6781f63b0e24ae 100644 --- a/boards/nordic/thingy53/Kconfig +++ b/boards/nordic/thingy53/Kconfig @@ -11,10 +11,6 @@ config THINGY53_INIT_PRIORITY if BOARD_THINGY53_NRF5340_CPUAPP || BOARD_THINGY53_NRF5340_CPUAPP_NS -config BOARD_SERIAL_BACKEND_CDC_ACM - bool "USB CDC" - default y - config DOMAIN_CPUNET_BOARD string default "thingy53/nrf5340/cpunet" diff --git a/boards/nordic/thingy53/Kconfig.defconfig b/boards/nordic/thingy53/Kconfig.defconfig index 885318feb7e92c5..d149d360f8595d9 100644 --- a/boards/nordic/thingy53/Kconfig.defconfig +++ b/boards/nordic/thingy53/Kconfig.defconfig @@ -79,58 +79,7 @@ config REGULATOR endif # !TRUSTED_EXECUTION_SECURE -if BOARD_SERIAL_BACKEND_CDC_ACM - -config USB_DEVICE_PRODUCT - default "Thingy:53 Application" - -config USB_DEVICE_VID - default 0x1915 - -config USB_DEVICE_PID - default 0x530C - -config USB_DEVICE_STACK - default y - -config USB_CDC_ACM - default y - -config UART_CONSOLE - default CONSOLE - -config USB_DEVICE_INITIALIZE_AT_BOOT - default y if !MCUBOOT - -config SHELL_BACKEND_SERIAL_CHECK_DTR - default SHELL - depends on UART_LINE_CTRL - -config UART_LINE_CTRL - default SHELL - -config USB_DEVICE_REMOTE_WAKEUP - default n - -if LOG - -# Logger cannot use itself to log -choice USB_CDC_ACM_LOG_LEVEL_CHOICE - default USB_CDC_ACM_LOG_LEVEL_OFF -endchoice - -# Set USB log level to error only -choice USB_DEVICE_LOG_LEVEL_CHOICE - default USB_DEVICE_LOG_LEVEL_ERR -endchoice - -# Wait 4000ms at startup for logging -config LOG_PROCESS_THREAD_STARTUP_DELAY_MS - default 4000 - -endif # LOG - -endif # BOARD_SERIAL_BACKEND_CDC_ACM +source "boards/common/usb/Kconfig.cdc_acm_serial.defconfig" endif # BOARD_THINGY53_NRF5340_CPUAPP || BOARD_THINGY53_NRF5340_CPUAPP_NS diff --git a/boards/nordic/thingy53/thingy53_nrf5340_common.dtsi b/boards/nordic/thingy53/thingy53_nrf5340_common.dtsi index 12b7cf6c13bb6ee..72471a0c95edd62 100644 --- a/boards/nordic/thingy53/thingy53_nrf5340_common.dtsi +++ b/boards/nordic/thingy53/thingy53_nrf5340_common.dtsi @@ -9,11 +9,6 @@ / { chosen { - zephyr,console = &cdc_acm_uart; - zephyr,shell-uart = &cdc_acm_uart; - zephyr,uart-mcumgr = &cdc_acm_uart; - zephyr,bt-mon-uart = &cdc_acm_uart; - zephyr,bt-c2h-uart = &cdc_acm_uart; zephyr,bt-hci-ipc = &ipc0; zephyr,bt-hci = &bt_hci_ipc0; nordic,802154-spinel-ipc = &ipc0; @@ -316,10 +311,6 @@ edge_connector_spi: &spi4 { zephyr_udc0: &usbd { compatible = "nordic,nrf-usbd"; status = "okay"; - - cdc_acm_uart: cdc_acm_uart { - compatible = "zephyr,cdc-acm-uart"; - }; }; /* Include default memory partition configuration file */ diff --git a/boards/nordic/thingy53/thingy53_nrf5340_cpuapp.dts b/boards/nordic/thingy53/thingy53_nrf5340_cpuapp.dts index 41d287c8ebab99e..9f3d7d46674c2ef 100644 --- a/boards/nordic/thingy53/thingy53_nrf5340_cpuapp.dts +++ b/boards/nordic/thingy53/thingy53_nrf5340_cpuapp.dts @@ -7,6 +7,7 @@ /dts-v1/; #include #include "thingy53_nrf5340_common.dtsi" +#include <../boards/common/usb/cdc_acm_serial.dtsi> / { model = "Nordic Thingy53 NRF5340 Application"; diff --git a/boards/nordic/thingy53/thingy53_nrf5340_cpuapp_ns.dts b/boards/nordic/thingy53/thingy53_nrf5340_cpuapp_ns.dts index 1ac7536fb007bf5..b9eb7dbe417923d 100644 --- a/boards/nordic/thingy53/thingy53_nrf5340_cpuapp_ns.dts +++ b/boards/nordic/thingy53/thingy53_nrf5340_cpuapp_ns.dts @@ -7,6 +7,8 @@ /dts-v1/; #include #include "thingy53_nrf5340_common.dtsi" +#include <../boards/common/usb/cdc_acm_serial.dtsi> + / { model = "Nordic Thingy53 NRF5340 Application"; diff --git a/boards/seeed/wio_terminal/Kconfig.defconfig b/boards/seeed/wio_terminal/Kconfig.defconfig index 47e610c12cd9fef..3ff8b29601596ee 100644 --- a/boards/seeed/wio_terminal/Kconfig.defconfig +++ b/boards/seeed/wio_terminal/Kconfig.defconfig @@ -5,3 +5,5 @@ configdefault LV_COLOR_16_SWAP default y if LVGL + +source "boards/common/usb/Kconfig.cdc_acm_serial.defconfig" diff --git a/boards/seeed/wio_terminal/wio_terminal.dts b/boards/seeed/wio_terminal/wio_terminal.dts index 27d24604f44cce5..c04feb0b14a7918 100644 --- a/boards/seeed/wio_terminal/wio_terminal.dts +++ b/boards/seeed/wio_terminal/wio_terminal.dts @@ -18,8 +18,6 @@ chosen { zephyr,sram = &sram0; zephyr,flash = &flash0; - zephyr,console = &wio_terminal_console; - zephyr,shell-uart = &wio_terminal_console; zephyr,code-partition = &code_partition; zephyr,display = &ili9341; }; @@ -300,8 +298,6 @@ zephyr_udc0: &usb0 { status = "okay"; pinctrl-0 = <&usb_dc_default>; pinctrl-names = "default"; - - wio_terminal_console: wio_terminal_console { - compatible = "zephyr,cdc-acm-uart"; - }; }; + +#include <../boards/common/usb/cdc_acm_serial.dtsi> diff --git a/boards/seeed/wio_terminal/wio_terminal_defconfig b/boards/seeed/wio_terminal/wio_terminal_defconfig index 20852ef411e9e69..e44adbcbb676e97 100644 --- a/boards/seeed/wio_terminal/wio_terminal_defconfig +++ b/boards/seeed/wio_terminal/wio_terminal_defconfig @@ -14,16 +14,3 @@ CONFIG_REGULATOR=y CONFIG_BOOTLOADER_BOSSA=y CONFIG_BOOTLOADER_BOSSA_ADAFRUIT_UF2=y CONFIG_BUILD_OUTPUT_UF2=y - -# Console over USB CDC-ACM -CONFIG_SERIAL=y -CONFIG_CONSOLE=y -CONFIG_UART_CONSOLE=y -CONFIG_UART_INTERRUPT_DRIVEN=y -CONFIG_USB_DEVICE_STACK=y -CONFIG_USB_DEVICE_INITIALIZE_AT_BOOT=y -CONFIG_USB_DEVICE_VID=0x2886 -CONFIG_USB_DEVICE_PID=0x802D -CONFIG_USB_DEVICE_MANUFACTURER="Seeed Studio" -CONFIG_USB_DEVICE_PRODUCT="Wio Terminal" -CONFIG_USB_CDC_ACM_LOG_LEVEL_OFF=y diff --git a/boards/seeed/xiao_ble/Kconfig.defconfig b/boards/seeed/xiao_ble/Kconfig.defconfig index d5c4e1ee51c70cc..3bc7ae6721fc46e 100644 --- a/boards/seeed/xiao_ble/Kconfig.defconfig +++ b/boards/seeed/xiao_ble/Kconfig.defconfig @@ -5,14 +5,6 @@ if BOARD_XIAO_BLE -if USB_DEVICE_STACK - -config UART_CONSOLE - default CONSOLE - -config USB_DEVICE_INITIALIZE_AT_BOOT - default y - -endif # USB_DEVICE_STACK +source "boards/common/usb/Kconfig.cdc_acm_serial.defconfig" endif # BOARD_XIAO_BLE diff --git a/boards/seeed/xiao_ble/xiao_ble_common.dtsi b/boards/seeed/xiao_ble/xiao_ble_common.dtsi index b8f4f259c10230f..7b87b6db76f8e26 100644 --- a/boards/seeed/xiao_ble/xiao_ble_common.dtsi +++ b/boards/seeed/xiao_ble/xiao_ble_common.dtsi @@ -12,11 +12,6 @@ / { chosen { - zephyr,console = &usb_cdc_acm_uart; - zephyr,shell-uart = &usb_cdc_acm_uart; - zephyr,uart-mcumgr = &usb_cdc_acm_uart; - zephyr,bt-mon-uart = &usb_cdc_acm_uart; - zephyr,bt-c2h-uart = &usb_cdc_acm_uart; zephyr,ieee802154 = &ieee802154; }; @@ -146,8 +141,6 @@ zephyr_udc0: &usbd { compatible = "nordic,nrf-usbd"; status = "okay"; - - usb_cdc_acm_uart: cdc-acm-uart { - compatible = "zephyr,cdc-acm-uart"; - }; }; + +#include <../boards/common/usb/cdc_acm_serial.dtsi> diff --git a/boards/seeed/xiao_ble/xiao_ble_defconfig b/boards/seeed/xiao_ble/xiao_ble_defconfig index 84eb3e97f22a575..725c581b36486a3 100644 --- a/boards/seeed/xiao_ble/xiao_ble_defconfig +++ b/boards/seeed/xiao_ble/xiao_ble_defconfig @@ -15,12 +15,6 @@ CONFIG_SERIAL=y # Enable console CONFIG_CONSOLE=y -# Logger cannot use itself to log -CONFIG_USB_CDC_ACM_LOG_LEVEL_OFF=y - -# Enable USB -CONFIG_USB_DEVICE_STACK=y - # Build UF2 by default, supported by the Adafruit nRF52 Bootloader CONFIG_BUILD_OUTPUT_UF2=y CONFIG_USE_DT_CODE_PARTITION=y diff --git a/boards/seeed/xiao_ble/xiao_ble_nrf52840_sense_defconfig b/boards/seeed/xiao_ble/xiao_ble_nrf52840_sense_defconfig index 027dd93e73b286f..37b63403a6df608 100644 --- a/boards/seeed/xiao_ble/xiao_ble_nrf52840_sense_defconfig +++ b/boards/seeed/xiao_ble/xiao_ble_nrf52840_sense_defconfig @@ -15,12 +15,6 @@ CONFIG_SERIAL=y # Enable console CONFIG_CONSOLE=y -# Logger cannot use itself to log -CONFIG_USB_CDC_ACM_LOG_LEVEL_OFF=y - -# Enable USB -CONFIG_USB_DEVICE_STACK=y - # Build UF2 by default, supported by the Adafruit nRF52 Bootloader CONFIG_BUILD_OUTPUT_UF2=y CONFIG_USE_DT_CODE_PARTITION=y diff --git a/boards/st/sensortile_box_pro/Kconfig b/boards/st/sensortile_box_pro/Kconfig deleted file mode 100644 index d8dc05c44f6a65e..000000000000000 --- a/boards/st/sensortile_box_pro/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -# SENSORTILE_BOX_PRO board configuration - -# Copyright (c) 2024 STMicroelectronics -# SPDX-License-Identifier: Apache-2.0 - -if BOARD_SENSORTILE_BOX_PRO - -config BOARD_SERIAL_BACKEND_CDC_ACM - bool "Use USB CDC as serial console backend" - default y - -endif # BOARD_SENSORTILE_BOX_PRO diff --git a/boards/st/sensortile_box_pro/Kconfig.defconfig b/boards/st/sensortile_box_pro/Kconfig.defconfig index fffa4f419f8b1b5..a357839f6c4b26f 100644 --- a/boards/st/sensortile_box_pro/Kconfig.defconfig +++ b/boards/st/sensortile_box_pro/Kconfig.defconfig @@ -20,50 +20,6 @@ config SPI_STM32_INTERRUPT default y depends on SPI -if BOARD_SERIAL_BACKEND_CDC_ACM - -config USB_DEVICE_STACK - default y - -config USB_CDC_ACM - default SERIAL - -config USB_DEVICE_INITIALIZE_AT_BOOT - default y if CONSOLE - -config SHELL_BACKEND_SERIAL_CHECK_DTR - default SHELL - depends on UART_LINE_CTRL - -config UART_LINE_CTRL - default SHELL - -config USB_DEVICE_REMOTE_WAKEUP - default n - -config USB_DEVICE_VID - default 0x0483 - -config USB_DEVICE_PID - default 0x5740 - -config USB_DEVICE_PRODUCT - default "Zephyr CDC SensorTile.box PRO" - -if LOG - -# Logger cannot use itself to log -choice USB_CDC_ACM_LOG_LEVEL_CHOICE - default USB_CDC_ACM_LOG_LEVEL_OFF -endchoice - -endif # LOG - -endif # BOARD_SERIAL_BACKEND_CDC_ACM - -DT_CHOSEN_ZEPHYR_CONSOLE := zephyr,console - -config UART_CONSOLE - default y if $(dt_chosen_enabled,$(DT_CHOSEN_ZEPHYR_CONSOLE)) && CONSOLE +source "boards/common/usb/Kconfig.cdc_acm_serial.defconfig" endif # BOARD_SENSORTILE_BOX_PRO diff --git a/boards/st/sensortile_box_pro/doc/index.rst b/boards/st/sensortile_box_pro/doc/index.rst index 1487518e68689e7..528e6762a87585a 100644 --- a/boards/st/sensortile_box_pro/doc/index.rst +++ b/boards/st/sensortile_box_pro/doc/index.rst @@ -221,24 +221,7 @@ Console There are two possible options for Zephyr console output: -- through USB as USB CDC/ACM class. This is the default case present in the board dts file - and is enabled by :kconfig:option:`CONFIG_BOARD_SERIAL_BACKEND_CDC_ACM`. - -.. code-block:: dts - :caption: boards/st/sensortile_box_pro/sensortile_box_pro.dts - - / { - chosen { - zephyr,console = &cdc_acm_uart0; - }; - }; - - &zephyr_udc0 { - cdc_acm_uart0: cdc_acm_uart0 { - compatible = "zephyr,cdc-acm-uart"; - }; - }; - +- through common CDC ACM UART backend configuration for all boards - through UART4 which is available on SWD connector (JP2). In this case a JTAG adapter can be used to connect SensorTile.box PRO and have both SWD and console lines available. diff --git a/boards/st/sensortile_box_pro/sensortile_box_pro.dts b/boards/st/sensortile_box_pro/sensortile_box_pro.dts index 7014fd86a7e5357..3eecf08b99d4f16 100644 --- a/boards/st/sensortile_box_pro/sensortile_box_pro.dts +++ b/boards/st/sensortile_box_pro/sensortile_box_pro.dts @@ -14,9 +14,6 @@ compatible = "st,sensortile-box-pro"; chosen { - zephyr,console = &cdc_acm_uart0; - zephyr,shell-uart = &cdc_acm_uart0; - zephyr,bt-c2h-uart = &cdc_acm_uart0; zephyr,sram = &sram0; zephyr,flash = &flash0; zephyr,code-partition = &slot0_partition; @@ -269,12 +266,10 @@ zephyr_udc0: &usbotg_fs { pinctrl-0 = <&usb_otg_fs_dm_pa11 &usb_otg_fs_dp_pa12>; pinctrl-names = "default"; status = "okay"; - - cdc_acm_uart0: cdc_acm_uart0 { - compatible = "zephyr,cdc-acm-uart"; - }; }; +#include <../boards/common/usb/cdc_acm_serial.dtsi> + &adc1 { pinctrl-0 = <&adc1_in15_pb0>; pinctrl-names = "default"; diff --git a/boards/st/steval_stwinbx1/Kconfig b/boards/st/steval_stwinbx1/Kconfig deleted file mode 100644 index 520aea81d168add..000000000000000 --- a/boards/st/steval_stwinbx1/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -# STEVAL_STWINBX1 Development kit board configuration - -# Copyright (c) 2024 STMicroelectronics -# SPDX-License-Identifier: Apache-2.0 - -if BOARD_STEVAL_STWINBX1 - -config BOARD_SERIAL_BACKEND_CDC_ACM - bool "Use USB CDC as serial console backend" - default y - -endif # BOARD_STEVAL_STWINBX1 diff --git a/boards/st/steval_stwinbx1/Kconfig.defconfig b/boards/st/steval_stwinbx1/Kconfig.defconfig index 35256e0c2ada75a..3d72efbe742f8f6 100644 --- a/boards/st/steval_stwinbx1/Kconfig.defconfig +++ b/boards/st/steval_stwinbx1/Kconfig.defconfig @@ -20,50 +20,6 @@ config SPI_STM32_INTERRUPT default y depends on SPI -if BOARD_SERIAL_BACKEND_CDC_ACM - -config USB_DEVICE_STACK - default y - -config USB_CDC_ACM - default SERIAL - -config USB_DEVICE_INITIALIZE_AT_BOOT - default y if CONSOLE - -config SHELL_BACKEND_SERIAL_CHECK_DTR - default SHELL - depends on UART_LINE_CTRL - -config UART_LINE_CTRL - default SHELL - -config USB_DEVICE_REMOTE_WAKEUP - default n - -config USB_DEVICE_VID - default 0x0483 - -config USB_DEVICE_PID - default 0x5740 - -config USB_DEVICE_PRODUCT - default "Zephyr CDC STEval-STWinbx1" - -if LOG - -# Logger cannot use itself to log -choice USB_CDC_ACM_LOG_LEVEL_CHOICE - default USB_CDC_ACM_LOG_LEVEL_OFF -endchoice - -endif # LOG - -endif # BOARD_SERIAL_BACKEND_CDC_ACM - -DT_CHOSEN_ZEPHYR_CONSOLE := zephyr,console - -config UART_CONSOLE - default y if $(dt_chosen_enabled,$(DT_CHOSEN_ZEPHYR_CONSOLE)) && CONSOLE +source "boards/common/usb/Kconfig.cdc_acm_serial.defconfig" endif # BOARD_STEVAL_STWINBX1 diff --git a/boards/st/steval_stwinbx1/doc/index.rst b/boards/st/steval_stwinbx1/doc/index.rst index 474127e8bcca1d3..8ef4c10dccaf0a1 100644 --- a/boards/st/steval_stwinbx1/doc/index.rst +++ b/boards/st/steval_stwinbx1/doc/index.rst @@ -230,23 +230,7 @@ Console There are two possible options for Zephyr console output: -- through USB as USB CDC/ACM class. This is the default case present in the board dts file - and is enabled by :kconfig:option:`CONFIG_BOARD_SERIAL_BACKEND_CDC_ACM`. - -.. code-block:: dts - :caption: boards/st/steval_stwinbx1/steval_stwinbx1.dts - - / { - chosen { - zephyr,console = &cdc_acm_uart0; - }; - }; - - &zephyr_udc0 { - cdc_acm_uart0: cdc_acm_uart0 { - compatible = "zephyr,cdc-acm-uart"; - }; - }; +- through common CDC ACM UART backend configuration for all boards - through USART2 which is available on SWD connector (CN4). In this case a JTAG adapter can be used to connect STEVAL-STWINBX1 and have both SWD and console lines available. diff --git a/boards/st/steval_stwinbx1/steval_stwinbx1.dts b/boards/st/steval_stwinbx1/steval_stwinbx1.dts index 1ca613ff12d23f5..41f66f9b9f8e866 100644 --- a/boards/st/steval_stwinbx1/steval_stwinbx1.dts +++ b/boards/st/steval_stwinbx1/steval_stwinbx1.dts @@ -14,9 +14,6 @@ compatible = "st,steval_stwinbx1"; chosen { - zephyr,console = &cdc_acm_uart0; - zephyr,shell-uart = &cdc_acm_uart0; - zephyr,sram = &sram0; zephyr,flash = &flash0; zephyr,code-partition = &slot0_partition; @@ -250,12 +247,10 @@ zephyr_udc0: &usbotg_fs { pinctrl-0 = <&usb_otg_fs_dm_pa11 &usb_otg_fs_dp_pa12>; pinctrl-names = "default"; status = "okay"; - - cdc_acm_uart0: cdc_acm_uart0 { - compatible = "zephyr,cdc-acm-uart"; - }; }; +#include <../boards/common/usb/cdc_acm_serial.dtsi> + &adc1 { pinctrl-0 = <&adc1_in1_pc0>; pinctrl-names = "default"; diff --git a/boards/weact/mini_stm32h743/Kconfig.defconfig b/boards/weact/mini_stm32h743/Kconfig.defconfig index bcc31baaf59faf9..3ebe575aff6150a 100644 --- a/boards/weact/mini_stm32h743/Kconfig.defconfig +++ b/boards/weact/mini_stm32h743/Kconfig.defconfig @@ -22,14 +22,6 @@ endif # LVGL endif # DISPLAY -if USB_DEVICE_STACK - -config UART_CONSOLE - default CONSOLE - -config USB_DEVICE_INITIALIZE_AT_BOOT - default y - -endif # USB_DEVICE_STACK +source "boards/common/usb/Kconfig.cdc_acm_serial.defconfig" endif # BOARD_MINI_STM32H743 diff --git a/boards/weact/mini_stm32h743/mini_stm32h743.dts b/boards/weact/mini_stm32h743/mini_stm32h743.dts index 5a63ca0f5bede66..abec39683d40730 100644 --- a/boards/weact/mini_stm32h743/mini_stm32h743.dts +++ b/boards/weact/mini_stm32h743/mini_stm32h743.dts @@ -15,8 +15,6 @@ compatible = "weact,mini-stm32h743"; chosen { - zephyr,console = &usb_cdc_acm_uart; - zephyr,shell-uart = &usb_cdc_acm_uart; zephyr,sram = &sram0; zephyr,flash = &flash0; zephyr,display = &st7735r_160x80; @@ -155,12 +153,10 @@ zephyr_udc0: &usbotg_fs { pinctrl-0 = <&usb_otg_fs_dm_pa11 &usb_otg_fs_dp_pa12>; pinctrl-names = "default"; status = "okay"; - - usb_cdc_acm_uart: cdc_acm_uart { - compatible = "zephyr,cdc-acm-uart"; - }; }; +#include <../boards/common/usb/cdc_acm_serial.dtsi> + &quadspi { pinctrl-names = "default"; pinctrl-0 = <&quadspi_clk_pb2 &quadspi_bk1_ncs_pb6 diff --git a/boards/weact/mini_stm32h743/mini_stm32h743_defconfig b/boards/weact/mini_stm32h743/mini_stm32h743_defconfig index 809e85276c9bb04..7feee60d01cceb8 100644 --- a/boards/weact/mini_stm32h743/mini_stm32h743_defconfig +++ b/boards/weact/mini_stm32h743/mini_stm32h743_defconfig @@ -15,9 +15,3 @@ CONFIG_CONSOLE=y # Enable GPIO CONFIG_GPIO=y - -# Logger cannot use itself to log -CONFIG_USB_CDC_ACM_LOG_LEVEL_OFF=y - -# Enable USB -CONFIG_USB_DEVICE_STACK=y