Issue: Zynseq Trigger device incorrectly saved

[spurkopf]

Describe the issue

A clear and concise description of what the issue is.
If snapshot is saved with Trigger device All, it will be changed to (none) when reloading

To Reproduce

Steps to reproduce the behavior:

Sequencer > ZynPad Menue > TRIGGER OPTIONS > Trigger device
Change to All
Save Snapshot
Reload Snapshot
Trigger device is set to (none)

Expected behaviour

Trigger device should be (ALL)

Actual behaviour

Trigger device is set to (none)

Screenshots

If applicable, add screenshots to help explain your problem.

Additional context

Add any other context about the problem here.

Configuration

Hardware

Raspberry Pi 4 Model B Rev 1.1
Audio: HifiBerry DAC+
Display: PiScreen 3.5 (v2)
Wiring: MCP23017_ENCODERS
I2C: MCP23017@0x20
Profile: 

System

Debian GNU/Linux 12 (bookworm)
Build Date: 2024-03-01
Memory: 15% (592M/3791M)
SD Card: 27% (15G/59G)
Temperature: 55.5ºC
Overclock: None

MIDI & UI

Tuning: 440 Hz
Master Channel: 16
Preload Presets: On
ZS3 (SubSnapShots): On
Power Save: 60 minutes
Audio Levels on Snapshots: On

Software

zynthian-sys: vangelis (5aebdf8)
zynthian-ui: vangelis (c962e2a)
zyncoder: vangelis (36691b3)
zynthian-data: vangelis (9875bb5)
zynthian-webconf: vangelis (dfad183)