Move scripts around & refactor existing ones

core/tabs/applications-setup/browser-setup.sh

@@ -3,8 +3,8 @@
 . ../common-script.sh
 
 install_chrome() {
-    printf "%b\n" "${YELLOW}Installing Google Chrome..${RC}."
     if ! command_exists google-chrome; then
+    printf "%b\n" "${YELLOW}Installing Google Chrome..${RC}."
         case "$PACKAGER" in
             apt-get|nala)
                 curl -O https://dl.google.com/linux/direct/google-chrome-stable_current_amd64.deb
@@ -33,8 +33,8 @@ install_chrome() {
 }
 
 install_thorium() {
-    printf "%b\n" "${YELLOW}Installing Thorium Browser...${RC}"
     if ! command_exists thorium-browser; then
+    printf "%b\n" "${YELLOW}Installing Thorium Browser...${RC}"
         case "$PACKAGER" in
             apt-get|nala)
                 "$ESCALATION_TOOL" rm -fv /etc/apt/sources.list.d/thorium.list
@@ -59,8 +59,8 @@ install_thorium() {
 }
 
 install_firefox() {
-    printf "%b\n" "${YELLOW}Installing Mozilla Firefox...${RC}"
     if ! command_exists firefox; then
+    printf "%b\n" "${YELLOW}Installing Mozilla Firefox...${RC}"
         case "$PACKAGER" in
             apt-get|nala)
                 "$ESCALATION_TOOL" "$PACKAGER" install -y firefox-esr
@@ -85,8 +85,8 @@ install_firefox() {
 }
 
 install_librewolf() {
-	printf "%b\n" "${YELLOW}Installing Librewolf...${RC}"
     if ! command_exists librewolf; then
+    printf "%b\n" "${YELLOW}Installing Librewolf...${RC}"
 	case "$PACKAGER" in
 		apt-get|nala)
 			"$ESCALATION_TOOL" "$PACKAGER" install -y gnupg lsb-release apt-transport-https ca-certificates
@@ -124,8 +124,8 @@ Signed-By: /usr/share/keyrings/librewolf.gpg" | "$ESCALATION_TOOL" tee /etc/apt/
 }
 
 install_brave() {
-    printf "%b\n" "${YELLOW}Installing Brave...${RC}"
     if ! command_exists brave; then
+    printf "%b\n" "${YELLOW}Installing Brave...${RC}"
         case "$PACKAGER" in
             apt-get|nala)
                 "$ESCALATION_TOOL" "$PACKAGER" install -y curl
@@ -173,8 +173,8 @@ install_vivaldi() {
 }
 
 install_chromium() {
-    printf "%b\n" "${YELLOW}Installing Chromium...${RC}"
     if ! command_exists chromium; then
+    printf "%b\n" "${YELLOW}Installing Chromium...${RC}"
         case "$PACKAGER" in
             apt-get|nala|zypper)
                 "$ESCALATION_TOOL" "$PACKAGER" install -y chromium
@@ -197,8 +197,8 @@ install_chromium() {
 }
 
 install_lynx() {
-    printf "%b\n" "${YELLOW}Installing Lynx...${RC}"
     if ! command_exists lynx; then
+    printf "%b\n" "${YELLOW}Installing Lynx...${RC}"
         case "$PACKAGER" in
             pacman)
                 "$ESCALATION_TOOL" "$PACKAGER" -S --noconfirm lynx

core/tabs/system-setup/docker-setup.sh → core/tabs/applications-setup/docker-setup.sh

@@ -9,7 +9,7 @@ choose_installation() {
     printf "%b\n" "1. ${YELLOW}Docker${RC}"
     printf "%b\n" "2. ${YELLOW}Docker Compose${RC}"
     printf "%b\n" "3. ${YELLOW}Both${RC}"
-    printf "Enter your choice [1-3]: "
+    printf "%b" "Enter your choice [1-3]: "
     read -r CHOICE
 
     case "$CHOICE" in
@@ -84,4 +84,4 @@ install_components() {
 
 checkEnv
 checkEscalationTool
-install_components
+install_components

core/tabs/applications-setup/linutil-installer.sh

@@ -59,4 +59,4 @@ installLinutil() {
 checkEnv
 checkEscalationTool
 checkAURHelper
-installLinutil
+installLinutil

core/tabs/applications-setup/office-suite-setup.sh

@@ -3,8 +3,8 @@
 . ../common-script.sh
 
 install_onlyoffice() {
-    printf "%b\n" "${YELLOW}Installing Only Office..${RC}."
     if ! command_exists onlyoffice-desktopeditors; then
+        printf "%b\n" "${YELLOW}Installing Only Office..${RC}."
         case "$PACKAGER" in
             apt-get|nala)
                 curl -O https://download.onlyoffice.com/install/desktop/editors/linux/onlyoffice-desktopeditors_amd64.deb
@@ -28,8 +28,8 @@ install_onlyoffice() {
 }
 
 install_libreoffice() {
-    printf "%b\n" "${YELLOW}Installing Libre Office...${RC}"
     if ! command_exists libreoffice; then
+        printf "%b\n" "${YELLOW}Installing Libre Office...${RC}"
         case "$PACKAGER" in
             apt-get|nala)
                 "$ESCALATION_TOOL" "$PACKAGER" install -y libreoffice-core
@@ -52,8 +52,8 @@ install_libreoffice() {
 }
 
 install_wpsoffice() {
-    printf "%b\n" "${YELLOW}Installing WPS Office...${RC}"
     if ! command_exists com.wps.Office; then
+        printf "%b\n" "${YELLOW}Installing WPS Office...${RC}"
         case "$PACKAGER" in
             pacman)
                 "$AUR_HELPER" -S --noconfirm wps-office
@@ -70,8 +70,9 @@ install_wpsoffice() {
 
 # needs to be updated every year for latest version
 install_freeoffice() {  
-	printf "%b\n" "${YELLOW}Installing Free Office...${RC}"
-    case "$PACKAGER" in
+    if ! command_exists softmaker-freeoffice-2024 freeoffice softmaker; then
+        printf "%b\n" "${YELLOW}Installing Free Office...${RC}"
+        case "$PACKAGER" in
         apt-get|nala)
             curl -O https://www.softmaker.net/down/softmaker-freeoffice-2024_1218-01_amd64.deb
             "$ESCALATION_TOOL" "$PACKAGER" install -y ./softmaker-freeoffice-2024_1218-01_amd64.deb
@@ -92,12 +93,15 @@ install_freeoffice() {
             printf "%b\n" "${RED}Unsupported package manager: ""$PACKAGER""${RC}"
             exit 1
             ;;
-    esac
+        esac
+    else
+        printf "%b\n" "${GREEN}Free Office is already installed.${RC}"
+    fi
 }
 
 install_evince() {
-    printf "%b\n" "${YELLOW}Installing Evince...${RC}"
     if ! command_exists evince; then
+        printf "%b\n" "${YELLOW}Installing Evince...${RC}"
         case "$PACKAGER" in
             pacman)
                 "$ESCALATION_TOOL" "$PACKAGER" -S --noconfirm evince
@@ -112,8 +116,8 @@ install_evince() {
 }
 
 install_okular() {
-    printf "%b\n" "${YELLOW}Installing Evince...${RC}"
     if ! command_exists okular; then
+        printf "%b\n" "${YELLOW}Installing Okular...${RC}"
         case "$PACKAGER" in
             pacman)
                 "$ESCALATION_TOOL" "$PACKAGER" -S --noconfirm okular
@@ -128,8 +132,8 @@ install_okular() {
 }
 
 install_pdfstudioviewer() {
-    printf "%b\n" "${YELLOW}Installing PDF Studio Viewer...${RC}"
     if ! command_exists pdfstudioviewer2024/pdfstudioviewer2024; then
+        printf "%b\n" "${YELLOW}Installing PDF Studio Viewer...${RC}"
         curl -O https://download.qoppa.com/pdfstudioviewer/PDFStudioViewer_linux64.sh
         "$ESCALATION_TOOL" chmod +x PDFStudioViewer_linux64.sh
         if sh PDFStudioViewer_linux64.sh; then
@@ -144,8 +148,8 @@ install_pdfstudioviewer() {
 }
 
 install_pdfstudio() {
-    printf "%b\n" "${YELLOW}Installing PDF Studio Viewer...${RC}"
     if ! command_exists pdfstudio2024/pdfstudio2024; then
+        printf "%b\n" "${YELLOW}Installing PDF Studio...${RC}"
         curl -O https://download.qoppa.com/pdfstudio/PDFStudio_linux64.sh
         "$ESCALATION_TOOL" chmod +x PDFStudio_linux64.sh
         if sh PDFStudio_linux64.sh; then
@@ -159,7 +163,6 @@ install_pdfstudio() {
     fi
 }
 
-
 officeSuiteSetup() {
     clear
     printf "%b\n" "Office Suite Setup Script"

core/tabs/applications-setup/setup-flatpak.sh

@@ -25,24 +25,14 @@ setup_flatpak() {
             pacman)
                 "$ESCALATION_TOOL" "$PACKAGER" -S --needed --noconfirm flatpak
                 ;;
-            apt-get|nala)
-                "$ESCALATION_TOOL" "$PACKAGER" install -y flatpak
-                ;;
-            dnf)
-                "$ESCALATION_TOOL" "$PACKAGER" install -y flatpak # Fedora should have flatpak already installed, this is just a failsafe
-                ;;
-            zypper)
-                "$ESCALATION_TOOL" "$PACKAGER" install -y flatpak
-                ;;
             *)
-                printf "%b\n" "${RED}Unsupported package manager: ""$PACKAGER""${RC}"
-                exit 1
+                "$ESCALATION_TOOL" "$PACKAGER" install -y flatpak
                 ;;
         esac
         printf "%b\n" "Adding Flathub remote..."
         "$ESCALATION_TOOL" flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo
     else
-        if command -v flatpak >/dev/null 2>&1; then
+        if command_exists flatpak; then
             if ! flatpak remotes | grep -q "flathub"; then
                 printf "%b" "${YELLOW}Detected Flatpak package manager but Flathub remote is not added. Would you like to add it? (y/N): ${RC}"
                 read -r add_remote

core/tabs/applications-setup/tab_data.toml

@@ -79,6 +79,11 @@ description = "DWM is a dynamic window manager for X.\nIt manages windows in til
 script = "dwmtitus-setup.sh"
 task_list = "installation, privileged file modification, systemd actions"
 
+[[data]]
+name = "Docker"
+script = "docker-setup.sh"
+task_list = "installation, systemd actions"
+
 [[data]]
 name = "Fastfetch"
 description = "Fastfetch is a neofetch-like tool for fetching system information and displaying it prettily.\nIt is written mainly in C, with performance and customizability in mind.\nThis command installs fastfetch and configures from CTT's mybash repository.\nhttps://github.com/ChrisTitusTech/mybash"
@@ -91,6 +96,11 @@ description = "Flatpak is a universal application sandbox for Linux that uses is
 script = "setup-flatpak.sh"
 task_list = "installation"
 
+[[data]]
+name = "Grub Theme"
+script = "grub-theme.sh"
+task_list = "privileged file modification"
+
 [[data]]
 name = "Kitty"
 description = "kitty is a free and open-source GPU-accelerated terminal emulator for Linux, macOS, and some BSD distributions, focused on performance and features.\nkitty is written in a mix of C and Python programming languages.\n This command installs and configures kitty."

core/tabs/system-setup/system-cleanup.sh

@@ -40,7 +40,7 @@ common_cleanup() {
 }
 
 clean_data() {
-    printf "%b\n" "${YELLOW}Clean up old cache files and empty the trash? (y/N): ${RC}"
+    printf "%b" "${YELLOW}Clean up old cache files and empty the trash? (y/N): ${RC}"
     read -r clean_response
     case $clean_response in
         y|Y)

core/tabs/system-setup/tab_data.toml

@@ -63,11 +63,6 @@ description = "Enables Virtualization through dnf"
 script = "fedora/virtualization.sh"
 task_list = "installation"
 
-[[data]]
-name = "Auto Mount Drive"
-script = "auto-mount.sh"
-task_list = "privileged file modification"
-
 [[data]]
 name = "Build Prerequisites"
 description = "This script is designed to handle the installation of various software dependencies across different Linux distributions"
@@ -102,11 +97,6 @@ description = "This script is designed to handle the installation and configurat
 script = "global-theme.sh"
 task_list = "installation, privileged file modification"
 
-[[data]]
-name = "Grub Theme"
-script = "grub-theme.sh"
-task_list = "privileged file modification"
-
 [[data]]
 name = "Remove Snaps"
 description = "This script is designed to remove snap"

core/tabs/system-setup/samba-ssh-setup.sh → core/tabs/utils/samba-ssh-setup.sh

@@ -68,16 +68,16 @@ setup_samba() {
 
     if [ -f "$SAMBA_CONFIG" ]; then
         printf "%b\n" "${YELLOW}Samba configuration file already exists in $SAMBA_CONFIG.${RC}"
-        printf "Do you want to modify the existing Samba configuration? (yes/no): "
+        printf "%b" "Do you want to modify the existing Samba configuration? (Y/n): "
         read -r MODIFY_SAMBA
-        if [ "$MODIFY_SAMBA" = "yes" ]; then
+        if [ "$MODIFY_SAMBA" = "Y" ] || [ "$MODIFY_SAMBA" = "y" ]; then
             "$ESCALATION_TOOL" "$EDITOR" "$SAMBA_CONFIG"
         fi
     else
         printf "%b\n" "${YELLOW}No existing Samba configuration found. Setting up a new one...${RC}"
 
         # Prompt user for shared directory path
-        printf "Enter the path for the Samba share (default: /srv/samba/share): "
+        printf "%b" "Enter the path for the Samba share (default: /srv/samba/share): "
         read -r SHARED_DIR
         SHARED_DIR=${SHARED_DIR:-/srv/samba/share}
 
@@ -86,7 +86,7 @@ setup_samba() {
         "$ESCALATION_TOOL" chmod -R 0777 "$SHARED_DIR"
 
         # Add a new Samba user
-        printf "Enter Samba username: "
+        printf "%b" "Enter Samba username: "
         read -r SAMBA_USER
 
         # Loop until the passwords match
@@ -97,7 +97,7 @@ setup_samba() {
             stty echo
             printf "Confirm Samba password: "
             stty -echo
-            read SAMBA_PASSWORD_CONFIRM
+            read -r SAMBA_PASSWORD_CONFIRM
             stty echo
             printf "\n"
             if [ "$SAMBA_PASSWORD" = "$SAMBA_PASSWORD_CONFIRM" ]; then
@@ -163,12 +163,12 @@ setup_ssh_samba(){
     clear
 
     # Display menu
-    printf "Select an option:\n"
-    printf "1. Setup SSH\n"
-    printf "2. Setup Samba\n"
-    printf "3. Configure Firewall\n"
-    printf "4. Setup All\n"
-    printf "5. Exit\n"
+    printf "%b\n" "Select an option:"
+    printf "%b\n" "1. Setup SSH"
+    printf "%b\n" "2. Setup Samba"
+    printf "%b\n" "3. Configure Firewall"
+    printf "%b\n" "4. Setup All"
+    printf "%b\n" "5. Exit"
 
     printf "%b" "Enter your choice (1-5): "
     read CHOICE
@@ -203,4 +203,4 @@ setup_ssh_samba(){
 
 checkEnv
 checkEscalationTool
-setup_ssh_samba
+setup_ssh_samba

core/tabs/utils/tab_data.toml

@@ -19,6 +19,11 @@ name = "Auto Detect Displays"
 description = "This utility is designed to detect and apply recommended configuration for monitors connected with your system"
 script = "monitor-control/auto_detect_displays.sh"
 
+[[data]]
+name = "Auto Mount Drive"
+script = "auto-mount.sh"
+task_list = "privileged file modification"
+
 [[data.entries]]
 name = "Change Orientation"
 description = "This utility is designed to change the orientation of monitors in your system"
@@ -55,6 +60,11 @@ description = "This utility is designed to reset scaling of a monitor in your sy
 script = "monitor-control/reset_scaling.sh"
 matches = true
 
+[[data]]
+name = "SSH-Samba"
+script = "samba-ssh-setup.sh"
+task_list = "installation, systemd actions, privileged file modification"
+
 [[data.entries]]
 name = "Scale Monitors"
 description = "This utility is designed to change the scaling of monitors in your system"