Update Setup-sngl-op.md

content/cumulus-netq-413/Installation-Management/Install-NetQ/Setup-sngl-op.md

@@ -158,12 +158,12 @@ Restore your data with the backup file you created during a backup using the `re
 Run the installation command on your NetQ server, referencing the path where the backup file resides and including the `config-key` created during the {{<link title="Back Up and Restore NetQ" text="backup process">}}.
 
 ```
-cumulus@netq-appliance:~$ netq install standalone full interface eth0 bundle /mnt/installables/NetQ-4.13.0.tgz config-key EhVuZXRxLWVuZHBvaW50LWdhdGV3YXkYsagDIix1NHgwU3NhWlV5NzZXZVpiK2FFazRmQ3dkM2hzTk9IMWtDRlNjM0FHdVIwPQ== restore /home/cumulus/backup-netq-standalone-onprem-4.12.0-2024-12-11_19_50_12_UTC.tar
+cumulus@netq-appliance:~$ netq install standalone full interface eth0 bundle /mnt/installables/NetQ-4.13.0.tgz restore /home/cumulus/backup-netq-standalone-onprem-4.12.0-2024-12-11_19_50_12_UTC.tar
 ```
 
 <div class="notices note"><p></p><p>NetQ uses the 10.244.0.0/16 (<code>pod-ip-range</code>) and 10.96.0.0/16 (<code>service-ip-range</code>) networks for internal communication by default. If you are using these networks, you must override each range by specifying new subnets for these parameters in the install command:</p>
-    <pre><div class="copy-code-img"><img src="https://icons.cumulusnetworks.com/01-Interface-Essential/29-Copy-Paste/copy-paste-1.svg" width="20" height="20"></div>cumulus@hostname:~$ netq install standalone full interface eth0 bundle /mnt/installables/NetQ-4.13.0.tgz pod-ip-range &lt;pod-ip-range&gt; service-ip-range &lt;service-ip-range&gt; config-key EhVuZXRxLWVuZHBvaW50LWdhdGV3YXkYsagDIix1NHgwU3NhWlV5NzZXZVpiK2FFazRmQ3dkM2hzTk9IMWtDRlNjM0FHdVIwPQ== restore /home/cumulus/backup-netq-standalone-onprem-4.12.0-2024-12-11_19_50_12_UTC.tar</pre><p>You can specify the IP address of the server instead of the interface name using the <code>ip-addr &lt;ip-address&gt;</code> argument:</p>
-    <pre><div class="copy-code-img"><img src="https://icons.cumulusnetworks.com/01-Interface-Essential/29-Copy-Paste/copy-paste-1.svg" width="20" height="20"></div>cumulus@hostname:~$ netq install standalone full ip-addr &lt;ip-address&gt; bundle /mnt/installables/NetQ-4.13.0.tgz config-key EhVuZXRxLWVuZHBvaW50LWdhdGV3YXkYsagDIix1NHgwU3NhWlV5NzZXZVpiK2FFazRmQ3dkM2hzTk9IMWtDRlNjM0FHdVIwPQ== restore /home/cumulus/backup-netq-standalone-onprem-4.12.0-2024-12-11_19_50_12_UTC.tar</pre><p>If you change the server IP address or hostname after installing NetQ, you must reset the server with the <code>netq bootstrap reset keep-db</code> command and rerun the install command.</p>
+    <pre><div class="copy-code-img"><img src="https://icons.cumulusnetworks.com/01-Interface-Essential/29-Copy-Paste/copy-paste-1.svg" width="20" height="20"></div>cumulus@hostname:~$ netq install standalone full interface eth0 bundle /mnt/installables/NetQ-4.13.0.tgz pod-ip-range &lt;pod-ip-range&gt; service-ip-range &lt;service-ip-range&gt; restore /home/cumulus/backup-netq-standalone-onprem-4.12.0-2024-12-11_19_50_12_UTC.tar</pre><p>You can specify the IP address of the server instead of the interface name using the <code>ip-addr &lt;ip-address&gt;</code> argument:</p>
+    <pre><div class="copy-code-img"><img src="https://icons.cumulusnetworks.com/01-Interface-Essential/29-Copy-Paste/copy-paste-1.svg" width="20" height="20"></div>cumulus@hostname:~$ netq install standalone full ip-addr &lt;ip-address&gt; bundle /mnt/installables/NetQ-4.13.0.tgz restore /home/cumulus/backup-netq-standalone-onprem-4.12.0-2024-12-11_19_50_12_UTC.tar</pre><p>If you change the server IP address or hostname after installing NetQ, you must reset the server with the <code>netq bootstrap reset keep-db</code> command and rerun the install command.</p>
     <p></p></div>
 
 <div class="notices tip"><p><ul><li>If this step fails for any reason, run <code>netq bootstrap reset</code> and then try again.</li><li>If you restore NetQ data to a server with an IP address that is different from the one used to back up the data, you must <a href="/networking-ethernet-software/cumulus-netq/Installation-Management/Install-NetQ/Install-NetQ-Agents/#configure-netq-agents">reconfigure the agents</a> on each switch as a final step.</li></ul></p></div>
@@ -213,4 +213,4 @@ cumulus@hostname:~$ netq show opta-health
 If any of the applications or services display a DOWN status after 30 minutes, open a support ticket and attach the output of the `opta-support` command.
 {{%/notice%}}
 
-After NetQ is installed, you can {{<link title="Access the NetQ UI" text="log in to NetQ">}} from your browser.
+After NetQ is installed, you can {{<link title="Access the NetQ UI" text="log in to NetQ">}} from your browser.