Editorial changes on user guide/install.md (#460)

* Editorial changes on user_guide/install.md

* Rewrap text

---------

Co-authored-by: Peter Shin <[email protected]>
Co-authored-by: Willem van Verseveld <[email protected]>

docs/src/user_guide/install.md

@@ -1,13 +1,13 @@
 # How to install
 
-First download and install the [current stable release of
-Julia](https://julialang.org/downloads/#current_stable_release). Please see [platform
-specific instructions](https://julialang.org/downloads/platform/) for further installation
-instructions and if you have trouble installing Julia.
-
-If you are new to Julia, it may be a good idea to check out the [Getting Started section of
-the Julia Manual](https://docs.julialang.org/en/v1/manual/getting-started/). Links to other
-learning resources can be found at
+First, download and install the [current stable release of
+Julia](https://julialang.org/downloads/#current_stable_release). If you have any issues
+installing Julia, please see [platform specific
+instructions](https://julialang.org/downloads/platform/) for further instructions.
+
+If you are new to Julia, it might be a good idea to check out the [Getting Started section
+of the Julia Manual](https://docs.julialang.org/en/v1/manual/getting-started/). You can also
+find additional learning resources at
 [julialang.org/learning](https://julialang.org/learning/).
 
 
@@ -16,62 +16,62 @@ Wflow can be used in two different ways, depending on the required use of the co
 - If you want to stay up-to-date with the latest version, explore and modify the model code,
   and write your own Julia scripts around the wflow package, we recommend installing wflow
   as a [Julia](https://julialang.org/) package.
-- If you don't need extra features, but just want to run simulations, a complied executable
-  version is available. This consists of a single executable, `wflow_cli`, allowing you to
-  run the model via the command line.
+- If you don't need extra features, but just want to run simulations, a compiled executable
+  version is available. This version includes a single executable, `wflow_cli`, which allows
+  you to run the model via the command line.
 
 Below we describe how to install both versions of wflow.
 
 ## Installing as Julia package
 
-Wflow is a [Julia](https://julialang.org/) package, that can be installed through several
-different ways. Below we show how to install wflow from Julia's package repository, and
-how to install the latest version from GitHub.
+Wflow is a [Julia](https://julialang.org/) package that can be installed in several ways.
+Below, we show how to install wflow from Julia's package repository and how to install the
+latest version from GitHub.
 
 ### Install from Julia's package repository
 
 To access Julia's package manager, press `]` in the Julia REPL.  To get back to the Julia
 REPL, press backspace or ^C.
 
 !!! tip
-    If you have not used Julia in a while, it can be a good idea to run `up` to update your
+    If you haven't used Julia in a while, it's a good idea to run `up` to update your
     packages.
     ```julia-repl
     pkg> up
     ```
 
-Access Julia's package manager and install wflow using:
+To access Julia's package manager and install wflow, use:
 ```julia-repl
 pkg> add Wflow
 ```
 
-This can take a while, especially the first time, since compatible dependencies are also
-automatically looked up and installed from the Pkg General registry.
+This process can take a while, especially on the first run, as compatible dependencies are
+automatically resolved and installed from the Pkg General registry.
 
 ### Install from GitHub
 
-It is also possible to install wflow from the `master` branch as follows:
+You can also install wflow from the `master` branch on the repository as follows:
 
 ```julia-repl
 pkg> add Wflow#master
 ```
 
-This command will track the `master` branch, and will update to the latest commit on that
-branch when you run `update`, or simply `up`, in the Pkg REPL. The use of `add` will install
-wflow in you home directory under `.julia/packages/Wflow`. Note that packages installed
-under `packages` by `add` are supposed to never be altered in that location, for Pkg and
-it's automatic dependency handling to work well.
+This command tracks the `master` branch and updates to the latest commit on that branch when
+you run `update`, or simply `up`, in the Pkg REPL. The `add` installs wflow in your home
+directory under `.julia/packages/Wflow`. Note that packages installed under `packages` by
+`add` should not be changed in the directory, as the change could disrupt Pkg's automatic
+dependency handling.
 
-If you want to make any changes to any of the files in the repository, you need to do
-a development install. This can be done using:
+If you want to modify any files in the repository, you need to do a development install.
+This can be done using:
 
 ```julia-repl
 pkg> dev Wflow
 ```
 
-This will clone the git repository, put it under your home directory in `.julia/dev/Wflow`,
-and add the wflow package to your project environment. Note that to receive updates, you
-have to pull in the latest changes yourself using `git pull`.
+This will clone the git repository, place it under your home directory in
+`.julia/dev/Wflow`, and add the wflow package to your project environment. To receive
+updates, you'll need to pull the latest changes manually using `git pull`.
 
 ### Check installation of wflow
 
@@ -81,22 +81,22 @@ Finally, go back to the Julia REPL and try to load wflow:
 julia> using Wflow
 ```
 
-The first time this will take longer as any package that is new or changed needs to be
-pre-compiled first, to allow faster loading on subsequent uses. No error messages should
-appear, indicating that you have now successfully installed wflow.
+The first time you do this, it may take longer as any new or changed packages need to be
+precompiled to enable faster loading on subsequent uses. No error messages should appear,
+which indicates that you have successfully installed wflow.
 
-Before ending this section, we want to recommend a few tools that can make using and
-developing Julia code easier.
+Before concluding this section, we recommend a few tools that can make using and developing
+Julia code easier.
 
 !!! tip
     There is a section on editors and IDEs for Julia on <https://julialang.org/>, scroll
     down to see it. We use and recommend Microsoft's free and open source [Visual Studio
-    Code](https://code.visualstudio.com/). When combined with the [Julia
+    Code](https://code.visualstudio.com/). Combined with the [Julia
     extension](https://www.julia-vscode.org/) it provides a powerful and interactive
     development experience.
 
 !!! tip
-    When planning to make changes to the code of wflow, we recommend installing the `Revise.jl`
+    If you plan to modify the code of wflow, we recommend installing the `Revise.jl`
     package. This package allows you to modify code and use the changes without restarting
     Julia. Install it with `add Revise` from the Pkg REPL. Then create a file called
     `.julia/config/startup.jl`, and put `using Revise` there. This will load Revise every
@@ -106,28 +106,25 @@ developing Julia code easier.
 
 Binaries of `wflow_cli` can be downloaded from our website
 [download.deltares.nl](https://download.deltares.nl/en/download/wflow/), and are currently
-available for Windows. Download and install the `.msi` file. After installing you can see
-two folders in the installation directory. It is only the `bin/wflow_cli` that is used. The
-artifacts folder contains binary dependencies such as netCDF.
+available for Windows. Download and install the `.msi` file. After installation, you will
+see two folders in the installation directory. Only the `bin/wflow_cli` is used. The
+`artifacts` folder contains binary dependencies such as netCDF.
 
 ```
 artifacts\
 bin\wflow_cli
 ```
 
-Check whether the installation was performed successfully by running `wflow_cli` with no
-arguments in the command line. This will give the following message:
+To verify whether the installation was completed successfully, run `wflow_cli` with no
+arguments in the command line. This will display the following message:
 
 ```
 Usage: wflow_cli 'path/to/config.toml'
 ```
 
 
-!!! note
-    The old version of wflow, based on Python and PCRaster libraries is also available to
-    download from our website [download.deltares.nl](https://download.deltares.nl/en/download/wflow/).
-    We recommend installing the Julia version, as this documentation is written to support
-    this version.
-
-
-
+!!! note 
+    The old version of wflow, which was based on Python and PCRaster libraries, is also
+    available for download from our website
+    [download.deltares.nl](https://download.deltares.nl/en/download/wflow/). We recommend
+    installing the Julia version, as this documentation is written to support this version.