Added info

README.md

@@ -0,0 +1,39 @@
+# RAK811 breakout board
+
+Code from here and tried to adapt to platformio
+https://github.com/Ebiroll/RAK811_BreakBoard.git
+
+It compiles and flashes but when I got blinky to run
+the  speed was way to low,
+
+# Add new board definition
+Edit rak811.json as the linker script is an absolute path.
+cp rak811.json .platformio/platforms/ststm32/boards/rak811.json
+
+
+# compile
+pio run
+
+
+# To flash firmware with  stm32flash
+In stm32flash_src there is code to flash the device
+    ./stm32flash -w .pioenvs/rak811/firmware.bin  /dev/ttyUSB0
+
+# Start
+It does not apear to tun correctly. :-(
+in src/main there is also a blinky main that can be used for debugging.
+I was able to run it once, then I made some change that made it unusable
+
+
+# Startup code
+The startup code should have been these,
+https://github.com/RAKWireless/RAK811_BreakBoard/tree/master/src/boards/RAK811BreakBoard/cmsis/arm-gcc
+
+boards/RAK811BreakBoard/cmsis/startup_stm32l151xb.s
+
+But instead
+.platformio/packages/framework-cmsis/variants/stm32l1/stm32l151xba/startup_stm32l151xba.S
+is used,
+
+Only difference is
+   /*bl __libc_init_array*/ /* PlatformIO note: Will work without -nostartfiles */

STM32L151XBA_FLASH.ld

@@ -0,0 +1,166 @@
+/*
+*****************************************************************************
+**
+**  File        : STM32L151XBA_FLASH.ld
+**
+**  Abstract    : Linker script for STM32L151XBA Device with
+**                128KByte FLASH, 32KByte RAM
+**
+**                Set heap size, stack size and stack location according
+**                to application requirements.
+**
+**                Set memory bank area and size if external memory is used.
+**
+**  Target      : STMicroelectronics STM32
+**
+**  Environment : Atollic TrueSTUDIO(R)
+**
+**  Distribution: The file is distributed �as is,� without any warranty
+**                of any kind.
+**
+**  (c)Copyright Atollic AB.
+**  You may use this file as-is or modify it according to the needs of your
+**  project. This file may only be built (assembled or compiled and linked)
+**  using the Atollic TrueSTUDIO(R) product. The use of this file together
+**  with other tools than Atollic TrueSTUDIO(R) is not permitted.
+**
+*****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x20007FFF;    /* end of RAM */
+
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0x200;      /* required amount of heap  */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+FLASH (rx)      : ORIGIN = 0x08000000, LENGTH = 128K
+RAM (xrw)       : ORIGIN = 0x20000000, LENGTH = 32K
+}
+
+/* Define output sections */
+SECTIONS
+{
+  /* The startup code goes first into FLASH */
+  .isr_vector :
+  {
+    . = ALIGN(4);
+    KEEP(*(.isr_vector)) /* Startup code */
+    . = ALIGN(4);
+  } >FLASH
+
+  /* The program code and other data goes into FLASH */
+  .text :
+  {
+    . = ALIGN(4);
+    *(.text)           /* .text sections (code) */
+    *(.text*)          /* .text* sections (code) */
+    *(.glue_7)         /* glue arm to thumb code */
+    *(.glue_7t)        /* glue thumb to arm code */
+    *(.eh_frame)
+
+    KEEP (*(.init))
+    KEEP (*(.fini))
+
+    . = ALIGN(4);
+    _etext = .;        /* define a global symbols at end of code */
+  } >FLASH
+
+  /* Constant data goes into FLASH */
+  .rodata :
+  {
+    . = ALIGN(4);
+    *(.rodata)         /* .rodata sections (constants, strings, etc.) */
+    *(.rodata*)        /* .rodata* sections (constants, strings, etc.) */
+    . = ALIGN(4);
+  } >FLASH
+
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+  .ARM : {
+    __exidx_start = .;
+    *(.ARM.exidx*)
+    __exidx_end = .;
+  } >FLASH
+
+  .preinit_array     :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array*))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  } >FLASH
+  .init_array :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT(.init_array.*)))
+    KEEP (*(.init_array*))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  } >FLASH
+  .fini_array :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT(.fini_array.*)))
+    KEEP (*(.fini_array*))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  } >FLASH
+
+  /* used by the startup to initialize data */
+  _sidata = LOADADDR(.data);
+
+  /* Initialized data sections goes into RAM, load LMA copy after code */
+  .data : 
+  {
+    . = ALIGN(4);
+    _sdata = .;        /* create a global symbol at data start */
+    *(.data)           /* .data sections */
+    *(.data*)          /* .data* sections */
+
+    . = ALIGN(4);
+    _edata = .;        /* define a global symbol at data end */
+  } >RAM AT> FLASH
+
+
+  /* Uninitialized data section */
+  . = ALIGN(4);
+  .bss :
+  {
+    /* This is used by the startup in order to initialize the .bss secion */
+    _sbss = .;         /* define a global symbol at bss start */
+    __bss_start__ = _sbss;
+    *(.bss)
+    *(.bss*)
+    *(COMMON)
+
+    . = ALIGN(4);
+    _ebss = .;         /* define a global symbol at bss end */
+    __bss_end__ = _ebss;
+  } >RAM
+
+  /* User_heap_stack section, used to check that there is enough RAM left */
+  ._user_heap_stack :
+  {
+    . = ALIGN(4);
+    PROVIDE ( end = . );
+    PROVIDE ( _end = . );
+    . = . + _Min_Heap_Size;
+    . = . + _Min_Stack_Size;
+    . = ALIGN(4);
+  } >RAM
+
+
+
+  /* Remove information from the standard libraries */
+  /DISCARD/ :
+  {
+    libc.a ( * )
+    libm.a ( * )
+    libgcc.a ( * )
+  }
+
+  .ARM.attributes 0 : { *(.ARM.attributes) }
+}