Note

This is a leisurely maintained fork of the original shellcaster, which is now unmaintained. Bugs will be fixed and minor changes will happen, but there should not be any new major features. For a more featureful fork, you might be interested in hullcaster.

This project is hosted on Gitlab and mirrored on Github. Issues and pull requests are accepted on both platforms. However, in case of mismatch between the two, consider the version on Gitlab as the correct one.

Shellcaster

Shellcaster is a terminal-based podcast manager, built in Rust. It provides a terminal UI (i.e., an ncurses-like interface) to allow users to subscribe to podcast feeds, and sync feeds to check for new episodes. Episodes may be downloaded locally, played with an external media player, and marked as played/unplayed. Keybindings and other options are configurable via a config file.

Installing shellcaster

On Linux

Make sure to have some dependencies installed. The required packages on Arch-based distributions are the following:

• git
• gcc
• pkgconf
• rust
• sqlite

Notes:

• The names of the packages on other distributions will likely be different. For sqlite, you are looking for the development headers for SQLite, which may be separate from the runtime package (e.g., libsqlite3-dev on Debian- based systems).
• If you enable the "native_tls" feature of shellcaster (disabled by default), you will also need libssl-dev, the development headers for OpenSSL (not needed on MacOS).
• If you enable the "sqlite-bundled" feature of shellcaster (disabled by default), pkgconf and sqlite are not necessary.

Next, download and compile the source code:

git clone https://gitlab.com/alpou/shellcaster-classic
cd shellcaster-classic
cargo build --release  # add or remove any features with --features

# to install for all users
sudo cp target/release/shellcaster /usr/local/bin/

# to install only for your user, without root permissions
# make sure that ~/.local/bin is in your PATH environment variable
cp target/release/shellcaster ~/.local/bin

See below for the list of available features when compiling.

On *BSD and MacOS

Shellcaster is developed for Linux. However it should work out of the box on *BSD and MacOS. Simply follow the same instructions as for Linux.

If you notice that something more is needed, please submit a patch or a pull request.

On other systems

Shellcaster is not officially supported on other systems.

Although some work has been done to try to get it working on Windows, unicode support is weak and there are issues when resizing the screen. You might have better luck using the new Windows Terminal, but this has not been tested.

If you are a user of Haiku, Redox, Windows, SerenityOS, Genode, HelenOS, Plan9, or other systems and want to help work out the bugs, pull requests are welcome!

List of compile features

By default, only the native_certs feature is enabled. Here is the full list of features:

• sqlite_bundled: When disabled, Rust will try to link shellcaster with SQLite header files already present on your system. If enabled, Rust will instead build SQLite from source and bundle the program with shellcaster. Bundling results in a larger application size, but may be suitable if you wish to use a different version of SQLite than the one on your system, or if you are on a system where installing SQLite is more difficult.

• native_tls: By default, shellcaster uses the rustls crate to enable TLS support (i.e., URLs with https). This may cause issues with some podcast feeds that use earlier versions of TLS (below TLS v1.2). If you find that some feeds are unable to update, you can try enabling the native_tls feature, which will instead use the native-tls crate -- which uses OpenSSL on Linux, Secure Transport on MacOS, and SChannel on Windows.

• native_certs: Shellcaster will use the trusted certificate roots from the trust store for your OS in order to validate TLS certificates. Turning this feature off will instead use a bundled copy of the Mozilla Root program, which will only be updated when you recompile shellcaster. Thus, leaving this feature enabled is recommended.

To specify different features when compiling, here is the format:

cargo install --no-track --no-default-features --features "<feature1>,<feature2>" --root "$HOME/.local"

The format is the same when using cargo build instead:

cargo build --release --no-default-features --features "<feature1>,<feature2>"
cp target/release/shellcaster ~/.local/bin/

Running shellcaster

Easy peasy! In your terminal, run:

shellcaster

Note that if you installed shellcaster to a different location, ensure that this location has been added to your $PATH:

export PATH="/path/to/add:$PATH"

Importing/exporting podcasts

Shellcaster supports importing OPML files from other podcast managers. If you can export to an OPML file from another podcast manager, you can import this file with:

shellcaster import -f /path/to/OPML/file.opml

If the -r flag is added to this command, it will overwrite any existing podcasts that are currently stored in shellcaster. You can also pipe in data to shellcaster import from stdin by not specifying the -f <file>.

You can export an OPML file from shellcaster with the following command:

shellcaster export -f /path/to/output/file.opml

You can also export to stdout by not specifying the -f <file>; for example, this command is equivalent:

shellcaster export > /path/to/output/file.opml

Configuring shellcaster

If you want to change configuration settings, the sample config.toml file can be copied from here. Download it, edit it to your fancy, and place it in the following location:

# on Linux and *BSD
mkdir -p ~/.config/shellcaster
cp config.toml ~/.config/shellcaster/

# on MacOS
mkdir -p ~/Library/Preferences/shellcaster
cp config.toml ~/Library/Preferences/shellcaster/

Or you can put config.toml in a place of your choosing, and specify the location at runtime:

shellcaster -c /path/to/config.toml

The sample file above provides comments that should walk you through all the available options. If any field does not appear in the config file, it will be filled in with the default value specified in those comments. The defaults are also listed below, for convenience.

Configuration options

download_path:

• Specifies where podcast episodes that are downloaded will be stored.
• Defaults:
  • On Linux: $XDG_DATA_HOME/shellcaster/ or $HOME/.local/share/shellcaster/
  • On MacOS: $HOME/Library/Application Support/shellcaster/
  • On Windows: C:\Users\username\AppData\Local\shellcaster\

play_command:

• Command used to play episodes. Use "%s" to indicate where file/URL will be entered to the command. Note that shellcaster does not include a native media player -- it simply passes the file path/URL to the given command with no further checking as to its success or failure. This process is started in the background, so be sure to send it to a program that has GUI controls of some kind so you have control over the playback.
• Default: "vlc %s"

download_new_episodes:

• Configures what happens when new episodes are found as podcasts are synced. Valid options:
  • "always" will automatically download all new episodes;
  • "ask-selected" will open a popup window to let you select which episodes to download, with all of them selected by default;
  • "ask-unselected" will open a popup window to let you select with episodes to download, with none of them selected by default;
  • "never" will never automatically download new episodes.
• Default: "ask-unselected"

simultaneous_downloads:

• Maximum number of files to download simultaneously. Setting this too high could result in network requests being denied. A good general guide would be to set this to the number of processor cores on your computer.
• Default: 3

max_retries:

• Maximum number of times to retry connecting to a URL to sync a podcast or download an episode.
• Default: 3

Default keybindings

Key       | Action
--------- | --------------
?         | Open help window
Arrows    | Navigate menus
h,j,k,l   | Navigate menus
Shift+K   | Up 1/4 page
Shift+J   | Down 1/4 page
PgUp      | Page up
PgDn      | Page down
a         | Add new feed
q         | Quit program
s         | Synchronize selected feed
Shift+S   | Synchronize all feeds
Enter / p | Play selected episode
m         | Mark selected episode as played/unplayed
Shift+M   | Mark all episodes as played/unplayed
d         | Download selected episode
Shift+D   | Download all episodes
u         | Unmark episode as downloaded (allows redownload)
x         | Delete downloaded file
Shift+X   | Delete all downloaded files
r         | Remove selected feed/episode from list
Shift+R   | Remove all feeds/episodes from list
1         | Toggle played/unplayed filter
2         | Toggle downloaded/undownloaded filter

Note: Actions can be mapped to more than one key (e.g., "Enter" and "p" both play an episode), but a single key may not do more than one action (e.g., you can't set "d" to both download and delete episodes).

Customizable colors

You can set the colors in the app with either built-in terminal colors or (provided your terminal supports it) customizable colors as well. See the "colors" section in the config.toml for details about how to specify these colors!

Syncing without the UI

Some users may wish to sync their podcasts automatically on a regular basis, e.g., every morning. The shellcaster sync subcommand can be used to do this without opening up the UI, and does a full sync of all podcasts in the database. This could be used to set up a cron job or systemd timer, for example. Please refer to the relevant documentation for these systems for setting it up on the schedule of your choice.

Contributing

Contributions from others are welcome! If you wish to contribute, feel free to clone the repo and submit pull requests.

When you do, please observe the following rules:

• Ensure you are on the develop branch when making your edits, as this is where the continued development of the app is taking place. Pull requests will only be merged to the develop branch, so you can help to avoid merge conflicts by doing your work on that branch in the first place.
• Indent your code with tabs, not with spaces. This is for accessibility reasons.
• Use the Allman style to place your braces ({}), except when opening a block in the arm of a match (=> {). In case of doubt, be consistent with the rest of the code.

Thanks to these fine folks who have made contributions: a-kenji, dougli1sqrd, dwvisser, luvchurchill, RankoKohime, thunderbiscuit

And thanks to the original author for starting this project: Jeff Hughes

TODO

Thing to fix:

• Handle mime types and extensions better, see src/download.rs:111 and this issue.

Some planned changes:

• An information page for each podcast (enhancement request)
• A more convenient presentation for the selection page after a SyncAll (enhancement request)

Why "shellcaster"?

The original author was trying to come up with a play on the word "podcast", and he liked the use of the word "shell" for several reasons. "Shell" is a synonym for the word "pod". The terminal is also referred to as a shell (and shellcaster is a terminal-based program). In addition, the program is built in Rust, whose mascot is Ferris the crab. Finally, he just personally enjoy that "shellcaster" sounds a lot like "spellcaster", so you can feel like a wizard when you use the program...