Apio Upload

Contents

• Usage
• Description
• Options
• Examples

Usage

apio upload [OPTIONS]

Description

Upload the bitstream to the FPGA. It builds the project if required

It also performs an automatic discovery and validation of the FTDI chip depending on the selected board.

Required package: oss-cad-suite

Options

Flag	Long Flag	Description
-b	--board	Select a specific board
	--serial-port	Select a specific serial port. You can check the available serial devices with the command apio system --lsserial
	--ftdi-id	Select a specific FTDI index. You can check the available FTDI indexes with the command apio system --lsftdi
-s	--sram	Perform SRAM programming. Only available for iceprog compatible boards
-f	--flash	Perform FLASH programming
-p	--project-dir	Set the target directory for the project.
-v	--verbose	Show the entire output of the command
	--verbose-yosys	Show the yosys output of the command
	--verbose-pnr	Show the pnr output of the command
	--top-module str	Set the top level module (w/o .v ending) for build

Note

All available boards, FPGAs, sizes, types and packs are showed in apio boards

Examples

1. Upload the ledon example

apio upload

---