To-do added. #525

Workflow file for this run

	name: Flow-IPC pipeline

	on:
	push:
	branches:
	- main
	pull_request:
	branches:
	- main
	# To create the button that runs a workflow manually (has to be in `main` at least):
	workflow_dispatch:

	jobs:
	build:
	strategy:
	fail-fast: false
	matrix:
	compiler:
	- id: gcc-9
	name: gcc
	version: 9
	c-path: /usr/bin/gcc-9
	cpp-path: /usr/bin/g++-9
	- id: gcc-10
	name: gcc
	version: 10
	c-path: /usr/bin/gcc-10
	cpp-path: /usr/bin/g++-10
	- id: gcc-11
	name: gcc
	version: 11
	c-path: /usr/bin/gcc-11
	cpp-path: /usr/bin/g++-11
	- id: gcc-13
	name: gcc
	version: 13
	c-path: /usr/bin/gcc-13
	cpp-path: /usr/bin/g++-13
	- id: clang-13
	name: clang
	version: 13
	c-path: /usr/bin/clang-13
	cpp-path: /usr/bin/clang++-13
	- id: clang-15
	name: clang
	version: 15
	c-path: /usr/bin/clang-15
	cpp-path: /usr/bin/clang++-15
	- id: clang-16
	name: clang
	version: 16
	c-path: /usr/bin/clang-16
	cpp-path: /usr/bin/clang++-16
	install: True
	- id: clang-17
	name: clang
	version: 17
	c-path: /usr/bin/clang-17
	cpp-path: /usr/bin/clang++-17
	install: True
	build-test-cfg:
	- id: debug
	conan-profile-build-type: Debug
	conan-profile-jemalloc-build-type: Debug
	# In any case Debug, at the CMake script (in meta-project ./, and in flow/, ipc_*/) level,
	# means LTO will be ignored (only Rel build-types enable LTO, if so instructed).
	# Still keeping this here to make that clear to the reader/maintainer. Could remove it though.
	no-lto: True
	- id: release
	conan-profile-build-type: Release
	conan-profile-jemalloc-build-type: Release
	# Leaving no-lto at default (false); full-on-optimized-no-debug is the quentessential LTO use case.
	- id: relwithdebinfo
	conan-profile-build-type: RelWithDebInfo
	conan-profile-jemalloc-build-type: Release
	# As of this writing RelWithDebInfo (in CMake, and Conan in our case at least doesn't override it)
	# defaults to -O2 (not -O3), which isn't a super-effective way of deploying LTO. Plus
	# we can use a test of non-LTO building.
	# TODO: Perhaps this should be a separate matrix dimension (LTO on, LTO off). Number of configs will
	# jump up, but it is more methodical and nice.
	no-lto: True
	- id: minsizerel
	conan-profile-build-type: MinSizeRel
	conan-profile-jemalloc-build-type: Release
	# Leaving no-lto at default (false); -Os (size-optimizing) with LTO on is pretty realistic.
	- id: relwithdebinfo-asan
	conan-profile-build-type: RelWithDebInfo
	conan-profile-jemalloc-build-type: Release
	conan-profile-custom-conf: \|
	# no-omit-frame-pointer recommended in (A\|UB\|M)SAN docs for nice stack traces.
	tools.build:cflags = ["-fsanitize=address", "-fno-omit-frame-pointer"]
	tools.build:cxxflags = ["-fsanitize=address", "-fno-omit-frame-pointer"]
	tools.build:sharedlinkflags = ["-fsanitize=address"]
	tools.build:exelinkflags = ["-fsanitize=address"]
	# jemalloc recipe needs this as of this writing (even though it dupes the stuff just-above conceptually).
	conan-profile-custom-buildenv: \|
	CXXFLAGS = -fsanitize=address -fno-omit-frame-pointer
	CFLAGS = -fsanitize=address -fno-omit-frame-pointer
	LDFLAGS = -fsanitize=address
	conan-profile-custom-settings: \|
	compiler.sanitizer = address
	conan-custom-settings-defs: \| # Could we not copy/paste these 4x?
	data['compiler']['gcc']['sanitizer'] = ['None', 'address', 'thread', 'memory', 'undefined']
	data['compiler']['clang']['sanitizer'] = ['None', 'address', 'thread', 'memory', 'undefined']
	sanitizer-name: asan # Used as internal enum of sorts + name of sanitizer-related dirs.
	# At least ASAN with clang + LTO => cryptic link error.
	# Regardless regular RelWithDebInfo already has no-lto=true; so we would follow suit. Just be aware
	# that changing it to false for whatever reason => ASAN probably breaks.
	no-lto: True
	- id: relwithdebinfo-ubsan
	conan-profile-build-type: RelWithDebInfo
	conan-profile-jemalloc-build-type: Release
	conan-profile-custom-conf: \|
	tools.build:cflags = ["-fsanitize=undefined", "-fno-omit-frame-pointer"]
	tools.build:cxxflags = ["-fsanitize=undefined", "-fno-omit-frame-pointer"]
	tools.build:sharedlinkflags = ["-fsanitize=undefined"]
	tools.build:exelinkflags = ["-fsanitize=undefined"]
	conan-profile-custom-buildenv: \|
	CXXFLAGS = -fsanitize=undefined -fno-omit-frame-pointer
	CFLAGS = -fsanitize=undefined -fno-omit-frame-pointer
	LDFLAGS = -fsanitize=undefined
	conan-profile-custom-settings: \|
	compiler.sanitizer = undefined
	conan-custom-settings-defs: \|
	data['compiler']['gcc']['sanitizer'] = ['None', 'address', 'thread', 'memory', 'undefined']
	data['compiler']['clang']['sanitizer'] = ['None', 'address', 'thread', 'memory', 'undefined']
	sanitizer-name: ubsan
	# While UBSAN might work with LTO, I do not want the aggravation/entropy. Turn it off.
	# Plus inheriting from regular RelWithDebInfo anyway.
	no-lto: True
	- id: relwithdebinfo-tsan
	conan-profile-build-type: RelWithDebInfo
	conan-profile-jemalloc-build-type: Release
	conan-profile-custom-conf: \|
	tools.build:cflags = ["-fsanitize=thread"]
	tools.build:cxxflags = ["-fsanitize=thread"]
	tools.build:sharedlinkflags = ["-fsanitize=thread"]
	tools.build:exelinkflags = ["-fsanitize=thread"]
	conan-profile-custom-buildenv: \|
	CXXFLAGS = -fsanitize=thread
	CFLAGS = -fsanitize=thread
	LDFLAGS = -fsanitize=thread
	conan-profile-custom-settings: \|
	compiler.sanitizer = thread
	conan-custom-settings-defs: \|
	data['compiler']['gcc']['sanitizer'] = ['None', 'address', 'thread', 'memory', 'undefined']
	data['compiler']['clang']['sanitizer'] = ['None', 'address', 'thread', 'memory', 'undefined']
	unit-tests-params: \| # As of this writing these trigger TSAN assert+bug+hangs at run-time. TODO: Revisit.
	--gtest_filter=-Shm_session_test.In_process_array:\
	Shm_session_test.In_process_vector_offset_ptr:\
	Shm_session_test.In_process_string_offset_ptr:\
	Shm_session_test.In_process_list_offset_ptr:\
	Shm_session_test.Multisession_in_process:\
	Shm_session_test.Allocation_performance_five:\
	Jemalloc_shm_pool_collection_test.Interface:\
	Jemalloc_shm_pool_collection_test.Multiprocess:\
	Jemalloc_shm_pool_collection_test.Owner_shm_pool_removal:\
	Jemalloc_shm_pool_collection_test.Multithread_load:\
	Borrower_shm_pool_collection_test.Interface:\
	Borrower_shm_pool_collection_test.Multiprocess:\
	Shm_pool_collection_test.Interface:\
	Shm_pool_collection_test.Multiprocess:\
	Shm_session_data_test.Multithread_object_database
	sanitizer-name: tsan
	# While TSAN might work with LTO, I do not want the aggravation/entropy. Turn it off.
	# Also, for some clangs, there are TSAN WARNINGs at times about too-small symbolizer buffer or something;
	# throwing LTO into the mix seems like unnecessary entropy.
	# Plus inheriting from regular RelWithDebInfo anyway.
	no-lto: True
	- id: relwithdebinfo-msan
	conan-profile-build-type: RelWithDebInfo
	conan-profile-jemalloc-build-type: Release
	conan-profile-custom-conf: \|
	tools.build:cflags = ["-fsanitize=memory", "-fno-omit-frame-pointer", "-fsanitize-ignorelist=/tmp/msan_ignore_list.cfg"]
	tools.build:cxxflags = ["-fsanitize=memory", "-fno-omit-frame-pointer", "-fsanitize-ignorelist=/tmp/msan_ignore_list.cfg"]
	tools.build:sharedlinkflags = ["-fsanitize=memory"]
	tools.build:exelinkflags = ["-fsanitize=memory"]
	conan-profile-custom-buildenv: \|
	CXXFLAGS = -fsanitize=memory -fno-omit-frame-pointer -fsanitize-ignorelist=/tmp/msan_ignore_list.cfg
	CFLAGS = -fsanitize=memory -fno-omit-frame-pointer -fsanitize-ignorelist=/tmp/msan_ignore_list.cfg
	LDFLAGS = -fsanitize=memory
	conan-profile-custom-settings: \|
	compiler.sanitizer = memory
	conan-custom-settings-defs: \|
	data['compiler']['gcc']['sanitizer'] = ['None', 'address', 'thread', 'memory', 'undefined']
	data['compiler']['clang']['sanitizer'] = ['None', 'address', 'thread', 'memory', 'undefined']
	sanitizer-name: msan
	# While MSAN might work with LTO, I do not want the aggravation/entropy. Turn it off.
	# Plus inheriting from regular RelWithDebInfo anyway.
	no-lto: True

	# We concentrate on clang sanitizers; they are newer/nicer; also MSAN is clang-only. So gcc ones excluded.
	# Attention! Excluding some sanitizer job(s) (with these reasons):
	# - MSAN: MSAN protects against reads of ununitialized memory; it is clang-only (not gcc), unlike the other
	# *SAN. Its mission overlaps at least partially with UBSAN's; for example for sure there were a couple of
	# uninitialized reads in test code which UBSAN caught. Its current state -- if not excluded -- is as
	# follows: 1, due to (as of this writing) building dependencies, including the capnp compiler binary used
	# during our build process, with the same compiler build config as the real code, ignore-list entires had
	# to be added to get past these problems. 2, before main() in all our demos/tests Boost was doing some
	# global init which MSAN did not like and hence aborted before main(); these are now ignored as well.
	# 3, this got us into main() at least, but immediately cryptic aborts started, seemingly again originating
	# in Boost (but requires detailed investigation to really understand). At this point I (ygoldfel)
	# disabled MSAN and filed a ticket. The overall status: MSAN is said to be useful, even with UBSAN active,
	# but all resources including official docs indicate that it is a high-maintenance tool:
	# All linked code, including libc and libstdc++/libc++ (the former in our case as of this writing),
	# must be instrumented to avoid cryptic false positives. The good news is we do build other things
	# instrumented (Boost libs, jemalloc, capnp/kj, gtest); but not libstdc++ (which official docs recommend);
	# this can be done but requires more work (I would suggest switching to libc++ in that case from the
	# start, as the clang people made it and themselves build it instrumented for their testing).
	# So the bottom line: MSAN is a tough cookie and requires more work before enabling. In the meantime we
	# have many layers of protection, including ASAN and UBSAN and lots of unit and integration tests.
	# So this status quo is pretty good. TODO: Do the work/get MSAN functional/useful; un-exclude it then.
	# - *SAN with gcc: We concentrate on clang sanitizers; they are newer/nicer; having to worry about differences
	# between them is an excessive burden. So excluding gcc ASAN/UBSAN/TSAN.
	# - TODO: Consider reducing to the newest or most stable clang. Generally they just keep improving; the
	# chances of something being uncaught (incorrectly) with a later version are slim. Not impossible though.
	# Look into it. Update: As of this writing transport_test exercise mode/SHM-jemalloc sub-mode is
	# disabled for TSAN clang-17 due to instability of TSAN itself. So clearly when it comes to TSAN
	# (which is officially in beta as of clang-17), higher version does not mean everything is better.
	# Hence perhaps this to-do is more of a longer-term thing, when all the sanitizers stabilize, or when
	# we find a single very-stable config. Just remember we aren't testing the sanitizer or our code's
	# ability to be sanitized; we just want to detect any problems in the code -- however we get there.
	# - *SAN with clang-13 (but not 15+): As of this writing clang-13 produces some additional warnings,
	# at least in TSAN, which appear to be related to nearby non-race messages like
	# `==75454==WARNING: Symbolizer buffer too small`. As a result, we either have to eliminate the
	# latter problem (TODO: look into it) or suppress false-positive race warnings that might only look
	# like added problems due to the incomplete stack traces. In general scanning through clang-13-produced
	# TSAN output, there is a chaotic feel to it, when it comes to stack output. Meanwhile so far
	# there has been zero evidence that a lower-version clang has actual added problems versus the other
	# compiler-versions, due to generating code differently. Since we have at least 3 other compiler-versions
	# running all the SAN, I (ygoldfel) decided to exclude clang-13 SAN, until the chaotic *SAN messages can
	# be at least reduced. In the meantime our *SAN coverage is still quite good.
	exclude:
	- build-test-cfg: { id: relwithdebinfo-msan }
	- compiler: { id: gcc-9 }
	build-test-cfg: { id: relwithdebinfo-asan }
	- compiler: { id: gcc-10 }
	build-test-cfg: { id: relwithdebinfo-asan }
	- compiler: { id: gcc-11 }
	build-test-cfg: { id: relwithdebinfo-asan }
	- compiler: { id: gcc-13 }
	build-test-cfg: { id: relwithdebinfo-asan }
	- compiler: { id: clang-13 }
	build-test-cfg: { id: relwithdebinfo-asan }
	- compiler: { id: gcc-9 }
	build-test-cfg: { id: relwithdebinfo-ubsan }
	- compiler: { id: gcc-10 }
	build-test-cfg: { id: relwithdebinfo-ubsan }
	- compiler: { id: gcc-11 }
	build-test-cfg: { id: relwithdebinfo-ubsan }
	- compiler: { id: gcc-13 }
	build-test-cfg: { id: relwithdebinfo-ubsan }
	- compiler: { id: clang-13 }
	build-test-cfg: { id: relwithdebinfo-ubsan }
	- compiler: { id: gcc-9 }
	build-test-cfg: { id: relwithdebinfo-tsan }
	- compiler: { id: gcc-10 }
	build-test-cfg: { id: relwithdebinfo-tsan }
	- compiler: { id: gcc-11 }
	build-test-cfg: { id: relwithdebinfo-tsan }
	- compiler: { id: gcc-13 }
	build-test-cfg: { id: relwithdebinfo-tsan }
	- compiler: { id: clang-13 }
	build-test-cfg: { id: relwithdebinfo-tsan }

	# Not using ubuntu-latest, so as to avoid surprises with OS upgrades and such.
	runs-on: ubuntu-22.04

	name: ${{ matrix.compiler.id }}-${{ matrix.build-test-cfg.id }}

	env:
	build-dir: ${{ github.workspace }}/build/${{ matrix.build-test-cfg.conan-profile-build-type }}
	install-root-dir: ${{ github.workspace }}/install/${{ matrix.build-test-cfg.conan-profile-build-type }}
	# (Unfortunately cannot refer to earlier-assigned `env.` entries within subsequent ones.)
	install-dir: ${{ github.workspace }}/install/${{ matrix.build-test-cfg.conan-profile-build-type }}/usr/local
	# Target file, as read by sanitized executable being invoked.
	san-suppress-cfg-file: ${{ github.workspace }}/install/${{ matrix.build-test-cfg.conan-profile-build-type }}/usr/local/bin/san_suppressions.cfg
	# Relative path (including file name) to suppressions file in a given context (which is given as dir name off
	# which this path works). Possible contexts as of this writing: ${{ github.workspace }}/<module>/src
	# (suppressions endemic to lib<module>); ${{ github.workspace }}/.../<test's source code dir>
	# (suppressions endemic to that test specifically). This suppressions file holds the compiler-version-independent
	# entries. (Malformed and ignored if matrix.build-test-cfg is not `*san`, meaning not sanitizer-enabled.)
	san-suppress-cfg-in-file1: sanitize/${{ matrix.build-test-cfg.sanitizer-name }}/suppressions_${{ matrix.compiler.name }}.cfg
	# Same but contains compiler version-specific entries (on top of those in san-suppress-cfg-file).
	san-suppress-cfg-in-file2: sanitize/${{ matrix.build-test-cfg.sanitizer-name }}/suppressions_${{ matrix.compiler.name }}_${{ matrix.compiler.version }}.cfg
	# Run-time controls for various sanitizers. Invoke before running test but after assembling suppressions
	# file ${{ env.san-suppress-cfg-file}} if any (clear it if needed, as it might be left-over from a previous
	# test). The proper technique is: 1, which of the suppression contexts (see above) are relevant?
	# (Safest is to specify all contexts; as you'll see just below, it's fine if there are no files in a given
	# context. However it would make code tedious to specify that way everywhere; so it's fine to skip contexts where
	# we know that these days there are no suppresisons.) Let the contexts' dirs be $DIR_A, $DIR_B, .... Then:
	# 2, `{ cat $DIR_A/${{ env.san-suppress-cfg-in-file1 }} $DIR_A/${{ env.san-suppress-cfg-in-file2 }} \
	# $DIR_B/${{ env.san-suppress-cfg-in-file1 }} $DIR_B/${{ env.san-suppress-cfg-in-file2 }} \
	# ... \
	# > ${{ env.san-suppress-cfg-file }} 2> /dev/null; } \|\| true`
	# 3, {{ env.setup-tests-env }}.
	#
	# Notes about items in *SAN_OPTIONS:
	#
	# Unclear if we need disable_coredump=0; it might be a gcc thing due to historic
	# issues with core size with ASAN; it is not documented in the clang *SAN docs for any
	# sanitizers; but it is accepted for ASAN and TSAN, seemingly, and maybe is at worst
	# harmless with out compiler versions. TODO: Maybe revisit.
	#
	# print_stacktrace=1 for UBSAN is recommended by documentation for nice stack traces
	# (also that is why we apply sanitizers to RelWithDebInfo; DebInfo part for the nice
	# stack traces/etc.; Rel part to reduce the considerable slowdown from some of the
	# sanitizers).
	#
	# second_deadlock_stack=1 for TSAN: TODO: Explain. Don't see it in clang TSAN docs.
	#
	# Caution! Setting multiple *SAN_OPTIONS (while invoking only 1 sanitizer, as we do)
	# seems like it would be harmless and avoid the `if/elif`s... but is actually a
	# nightmare; there is some interaction in clang (at least 13-17) which causes the
	# wrong sanitizer reading suppressions from another one => suppression parse error =>
	# none of the demos/tests get anywhere at all. So set just the right one!
	setup-tests-env: \|
	if [ "${{ matrix.build-test-cfg.sanitizer-name }}" = asan ]; then
	export ASAN_OPTIONS='disable_coredump=0'
	echo "ASAN_OPTIONS = [$ASAN_OPTIONS]."
	elif [ "${{ matrix.build-test-cfg.sanitizer-name }}" = ubsan ]; then
	export SAN_SUPP=1
	export SAN_SUPP_CFG=${{ github.workspace }}/install/${{ matrix.build-test-cfg.conan-profile-build-type }}/usr/local/bin/san_suppressions.cfg
	export UBSAN_OPTIONS="disable_coredump=0 print_stacktrace=1 suppressions=$SAN_SUPP_CFG"
	echo "UBSAN_OPTIONS = [$UBSAN_OPTIONS]."
	elif [ "${{ matrix.build-test-cfg.sanitizer-name }}" = tsan ]; then
	export SAN_SUPP=1
	export SAN_SUPP_CFG=${{ github.workspace }}/install/${{ matrix.build-test-cfg.conan-profile-build-type }}/usr/local/bin/san_suppressions.cfg
	export TSAN_OPTIONS="disable_coredump=0 second_deadlock_stack=1 suppressions=$SAN_SUPP_CFG"
	echo "TSAN_OPTIONS = [$TSAN_OPTIONS]."
	fi
	if [ "$SAN_SUPP" != '' ]; then
	echo 'Sanitizer [${{ matrix.build-test-cfg.sanitizer-name }}] suppressions cfg contents:'
	echo '[[[ file--'
	cat $SAN_SUPP_CFG
	echo '--file ]]]'
	fi
	# TODO: Ideally would go, like other things, under github.workspace somewhere (maybe build/),
	# but that var isn't available in `strategy` up above, where we specify the compiler option
	# pointing to this file. Surely we could cook something up; but meanwhile /tmp works fine.
	msan-ignore-list-cfg-file: /tmp/msan_ignore_list.cfg

	steps:
	- name: Update available software list for apt-get
	run: \|
	lsb_release -a
	sudo apt-get update

	- name: Checkout `ipc` repository and submodules (`flow`, `ipc_*`)
	uses: actions/checkout@v4
	with:
	submodules: true

	- name: Install clang compiler
	if: \|
	matrix.compiler.install && (matrix.compiler.name == 'clang')
	run: \|
	wget https://apt.llvm.org/llvm.sh
	chmod u+x llvm.sh
	sudo ./llvm.sh ${{ matrix.compiler.version }}

	- name: Install gcc compiler
	if: \|
	matrix.compiler.install && (matrix.compiler.name == 'gcc')
	run: \|
	sudo apt-get install -y software-properties-common
	sudo add-apt-repository ppa:ubuntu-toolchain-r/test -y
	sudo apt-get update
	sudo apt-get install -y gcc-${{ matrix.compiler.version }} g++-${{ matrix.compiler.version }}

	# We get highest 1.x, instead of 2+, because there are certain dependency recipe issues (namely for jemalloc)
	# with 2+. TODO: 1, expound more clearly here or elsewhere what those issues are; 2, solve those issues and
	# thus move to Conan 2+; Conan 1.x is officially on "deprecation path." This will also help resolve some other
	# to-dos more easily (targeting different build settings at built product source versus tools used to build it
	# = prime example).
	- name: Install the latest version of Conan which is less than 2
	run: \|
	pip install "conan<2"

	- name: Add custom settings for Conan packages
	if: \|
	matrix.build-test-cfg.conan-custom-settings-defs
	run: \|
	conan config init
	pip install PyYAML
	CONAN_SETTINGS_PATH=$(conan config home)/settings.yml
	python -c "

	import yaml

	with open('$CONAN_SETTINGS_PATH', 'r') as file:
	data = yaml.safe_load(file)

	${{ matrix.build-test-cfg.conan-custom-settings-defs }}

	with open('$CONAN_SETTINGS_PATH', 'w') as file:
	yaml.dump(data, file)
	"

	# Important info/somewhat important TODO: The C[XX]FLAGS and linker-flags are supplied via
	# ${{ matrix.build-test-cfg.conan-profile-custom-conf }} and
	# ${{ matrix.build-test-cfg.conan-profile-custom-buildenv }}. These affect not just our objects/libs/executables;
	# but also at least: 3rd party libs (jemalloc, capnp/kj, boost, gtest), 3rd party executables
	# (capnp compiler binary; temp binaries created by auto-tools configure scripts to test features).
	# In the case of the libs that's usually good; in particular things like
	# -fsanitize=address (ASAN) (for build-type relwithdebinfo-asan) ideally are applied to all built code
	# uniformly. (There are other libs being built, one can see: at least openssl and zlib; they're not really
	# involved in our actual product, at least not in a core way, so for those it arguably matters less either way.)
	# In the case of the binaries it is usually bad; we want the fastest, most normal tools possible, not ones
	# built weirdly with whatever settings we're trying to test with our own software. For one it makes those
	# tools slower -- perhaps not the hugest deal in practice here -- but it also generally increases entropy; and
	# it has also resulted in various pain:
	# - Cannot use -fno-sanitize-recover with UBSAN (abort program on warning) if we wanted to: it causes some
	# hidden configure-script-generated binary abort => capnp binary build fails.
	# - capnp binary fails MSAN at startup; hence capnp-compilation of our .capnp schemas fails.
	# We have worked around all these, so the thing altogether works. It's just somewhat odd and entropy-ridden;
	# and might cause maintanability problems over time, as it has already in the past.
	# The TODO is to be more judicious about it
	# and only apply these things to the libs/executables we want it applied. It is probably not so simple;
	# but worst-case it should be possible to use something like build-type-cflags-override to target our code;
	# and per-recipe (Boost, jemalloc, gtest...) techniques to target others; and not use the aggressive
	# conan-profile-custom-conf and conan-profile-custom-buildenv. That said, there will be interesting subtleties
	# like: libcapnp/kj are linked into capnp compiler binary; and to our code. So we should instrument it with
	# sanitizer (when applicable); now some of the capnp-compiler-binary is instrumented; some isn't. Would that
	# work, or would it be better to build capnp twice then (once for the binary, once for the linked libraries)?
	- name: Create Conan profile
	run: \|
	cat <<'EOF' > conan_profile
	[settings]
	compiler = ${{ matrix.compiler.name }}
	compiler.version = ${{ matrix.compiler.version }}
	compiler.cppstd = 17
	# TODO: Consider testing with LLVM-libc++ also (with clang anyway).
	compiler.libcxx = libstdc++11
	arch = x86_64
	os = Linux
	jemalloc:build_type = ${{ matrix.build-test-cfg.conan-profile-jemalloc-build-type }}
	build_type = ${{ matrix.build-test-cfg.conan-profile-build-type }}
	${{ matrix.build-test-cfg.conan-profile-custom-settings }}

	[conf]
	tools.env.virtualenv:auto_use = True
	tools.build:compiler_executables = {"c": "${{ matrix.compiler.c-path }}", "cpp": "${{ matrix.compiler.cpp-path }}"}
	${{ matrix.build-test-cfg.conan-profile-custom-conf }}

	[buildenv]
	CC = ${{ matrix.compiler.c-path }}
	CXX = ${{ matrix.compiler.cpp-path }}
	${{ matrix.build-test-cfg.conan-profile-custom-buildenv }}

	[options]
	flow:doc = False
	flow:build = True
	ipc:doc = False
	ipc:build = True
	EOF
	if [ "${{ matrix.build-test-cfg.no-lto }}" != '' ] && [ "${{ matrix.build-test-cfg.no-lto }}" != 'False' ]; then
	echo 'ipc:build_no_lto = True' >> conan_profile
	fi
	if [ "${{ matrix.build-test-cfg.build-type-cflags-override }}" != '' ]; then
	echo 'ipc:build_type_cflags_override = ${{ matrix.build-test-cfg.build-type-cflags-override }}' >> conan_profile
	fi

	# We need to prepare a sanitizer ignore-list in MSAN mode. Background for this is subtle and annoying:
	# As it stands, whatever matrix compiler/build-type is chosen applies not just to our code (correct)
	# and 3rd party libraries we link like lib{boost_*\|capnp\|kj\|jemalloc} (semi-optional but good) but also
	# unfortunately any items built from source during "Install Flow-IPC dependencies" step that we then
	# use during during the build step for our own code subsequently. At a minimum this will slow down
	# such programs. (For the time being we accept this as not-so-bad; to target this config at some things
	# but not others is hard/a ticket.) In particular, though, the capnp compiler binary is built this way;
	# and our "Build targets" step uses it to build key things (namely convert .capnp schemas into .c++
	# and .h sources which are then themselves compiled/used in compilation). In the case of MSAN, this
	# version of capnp compiler happens to trigger several MSAN failures (presumably they are not a true
	# problem, and it's not our job really to sanitize capnp -- though we can file tickets for them and/or
	# issue PRs; but I digress). So in MSAN mode our build step fails, when capnp compiler itself aborts
	# with MSAN failures. One approach is to not apply MSAN to capnp compiler (no-go for now; it's a ticket
	# as mentioned); another is to uses Conan to patch capnp package for them (not a bad idea; ticket filed);
	# and lastly we can put the specific failures on the ignore-list for MSAN. For now we do that; while
	# unpleasant it does get the job done. TODO: Revisit/resolve tickets/improve (see above).
	- name: Prepare MSAN sanitizer compile-time config file(s)
	if: \|
	(!cancelled()) && (matrix.build-test-cfg.sanitizer-name == 'msan')
	run: \|
	cat <<'EOF' > $${ env.msan-ignore-list-cfg-file }}
	[memory]
	# Warning: In clang-18 there are breaking changes in how globs/regexes are interpreted. See docs.
	# Currently assuming clang-17 or lower.
	#
	# capnp compiler MSAN failures suppressed:
	src:/kj/filesystem-disk-unix.
	src:*/bits/stl_tree.h
	EOF
	# Append to that the suppressed items from the source tree. These apply to the real code being
	# built below, so just stylistically it is nicer to keep them there along with other
	# sanitizers' suppressions. (Note, though, that MSAN does not have a run-time suppression
	# system; only these ignore-lists. The others do also have ignore-lists though.
	# The format is totally different between the 2 types of suppression.)
	# Our MSAN support is budding compared to UBSAN/ASAN/TSAN; so just specify the one ingore-list file
	# we have now. TODO: If/when MSAN support gets filled out like the others', then use a context system
	# a-la env.setup-tests-env.
	cat ${{ github.workspace }}/flow/src/sanitize/msan/ignore_list_${{ matrix.compiler.name }}.cfg \
	>> $${ env.msan-ignore-list-cfg-file }}
	echo "The combined MSAN ignore-list config file follows:"
	cat $${ env.msan-ignore-list-cfg-file }}

	- name: Install Flow-IPC dependencies with Conan using the profile
	run: \|
	conan editable add flow flow/1.0
	conan install . \
	--profile:build conan_profile --profile:host conan_profile --build missing

	- name: Build libraries and demos/tests with Conan
	run: \|
	conan build .

	- name: Install built targets with Makefile
	run: \|
	make install \
	--directory ${{ env.build-dir }} DESTDIR=${{ env.install-root-dir }}
	# Save runner space: blow away build dir after install.
	rm -rf ${{ env.build-dir }}

	# From now on use !cancelled() to try to run any test/demo that exists regardless
	# of preceding failures if any. Same-ish (always()) with the log-upload at the end.
	# Worst-case they'll all fail in super-basic ways and immediately; no extra harm done.

	# From now on save logs in install-dir/bin/logs. They will be tarred up and uploaded
	# as artifacts at the end. For those tests below that produce separate logs as files
	# to begin-with, this is a no-brainer. For those (as of this writing the main one
	# is unit_test; but also the link tests produce short logs too) who use stdout/stderr
	# the reason to do this is 2-fold.
	# - UBSAN in particular produces non-fatal error output about problems it detects.
	# We need to analyze them after the fact and fail a step below in that case to
	# alert developers who would then fix such new problems.
	# - One can also build UBSAN-mode things with -fno-sanitize-recover which would
	# cause abnormal program exit on first error. We do not do this for these
	# reasons:
	# - It is more convenient to let it continue and thus show all problems in one
	# shot.
	# - There is a side problem: At this time compile settings, including
	# in UBSAN case `-fsanitize=undefined -fno-sanitize-recover`, are applied not
	# just to our code or 3rd party libraries but also any other stuff built
	# (due to setting C[XX]FLAGS in Conan profile). Targeting just the exact
	# stuff we want with those is hard and a separate project/ticket.
	# In the meantime -fno-sanitize-recover causes completely unrealted program
	# halts during the very-early step, when building dependencies including
	# capnp; some autotools configure.sh fails crazily, and nothing can work
	# from that point on due to dependencies-install step failing. So at this
	# time -fno-sanitize-recover is a no-go; it affects too much unrelated stuff.
	# - It is more consistent/convenient to get all the bulky logs in one place as an
	# artifact, rather than some in the pipeline output, others in the artifacts.
	# (This preference is subjective, yes.)

	# Here, as in all other tests below, we assemble a suppressions file in case this is a sanitized
	# run; and we follow the procedure explained near setup-tests-env definition. To reiterate: to avoid
	# tedium, but at the cost of mantainability of this file (meaning if a suppressions context is added then
	# a few lines would need to be added here), we only list those contexts where any sanitizer has
	# any suppression; otherwise we skip it for brevity. `find . -name 'suppressions*.cfg` is pretty useful
	# to determine their presence in addition to whether the test itself has its specific suppressions of any kind.
	- name: Run link test [`ipc_core` - Flow-IPC Core]
	if: \|
	!cancelled()
	run: \|
	cd ${{ env.install-dir }}/bin
	mkdir -p logs/ipc_core_link_test
	SUPP_DIR_A=${{ github.workspace }}/flow/src
	{ cat $SUPP_DIR_A/${{ env.san-suppress-cfg-in-file1 }} $SUPP_DIR_A/${{ env.san-suppress-cfg-in-file2 }} \
	> ${{ env.san-suppress-cfg-file }} 2> /dev/null; } \|\| true
	${{ env.setup-tests-env }}
	./ipc_core_link_test.exec > logs/ipc_core_link_test/console.log 2>&1

	- name: Run link test [`ipc_transport_structured` - Flow-IPC Structured Transport]
	if: \|
	!cancelled()
	run: \|
	cd ${{ env.install-dir }}/bin
	mkdir -p logs/ipc_transport_structured_link_test
	SUPP_DIR_A=${{ github.workspace }}/flow/src
	{ cat $SUPP_DIR_A/${{ env.san-suppress-cfg-in-file1 }} $SUPP_DIR_A/${{ env.san-suppress-cfg-in-file2 }} \
	> ${{ env.san-suppress-cfg-file }} 2> /dev/null; } \|\| true
	${{ env.setup-tests-env }}
	./ipc_transport_structured_link_test.exec > logs/ipc_transport_structured_link_test/console.log 2>&1

	- name: Run link test [`ipc_session` - Flow-IPC Sessions]
	if: \|
	!cancelled()
	run: \|
	cd ${{ env.install-dir }}/bin
	mkdir -p logs/ipc_session_link_test
	SUPP_DIR_A=${{ github.workspace }}/flow/src
	{ cat $SUPP_DIR_A/${{ env.san-suppress-cfg-in-file1 }} $SUPP_DIR_A/${{ env.san-suppress-cfg-in-file2 }} \
	> ${{ env.san-suppress-cfg-file }} 2> /dev/null; } \|\| true
	${{ env.setup-tests-env }}
	./ipc_session_link_test_srv.exec > logs/ipc_session_link_test/srv.console.log 2>&1 &
	sleep 1
	./ipc_session_link_test_cli.exec > logs/ipc_session_link_test/cli.console.log 2>&1

	- name: Run link test [`ipc_shm` - Flow-IPC Shared Memory]
	if: \|
	!cancelled()
	run: \|
	cd ${{ env.install-dir }}/bin
	mkdir -p logs/ipc_shm_link_test
	SUPP_DIR_A=${{ github.workspace }}/flow/src
	{ cat $SUPP_DIR_A/${{ env.san-suppress-cfg-in-file1 }} $SUPP_DIR_A/${{ env.san-suppress-cfg-in-file2 }} \
	> ${{ env.san-suppress-cfg-file }} 2> /dev/null; } \|\| true
	${{ env.setup-tests-env }}
	./ipc_shm_link_test_srv.exec > logs/ipc_shm_link_test/srv.console.log 2>&1 &
	sleep 1
	./ipc_shm_link_test_cli.exec > logs/ipc_shm_link_test/cli.console.log 2>&1

	- name: Run link test [`ipc_shm_arena_lend` - Flow-IPC SHM-jemalloc]
	if: \|
	!cancelled()
	run: \|
	cd ${{ env.install-dir }}/bin
	mkdir -p logs/ipc_shm_arena_lend_link_test
	SUPP_DIR_A=${{ github.workspace }}/flow/src
	# As of this writing there are certain harmless UBSAN, TSAN triggers within jemalloc, and ipc_shm_arena_lend
	# is the thing that depends on jemalloc, and of the `link_test`s this is the only one that links
	# ipc_shm_arena_lend (directly or otherwise). Hence compared to the other `link_test`s this adds the
	# ipc_shm_arena_lend suppression context.
	SUPP_DIR_B=${{ github.workspace }}/ipc_shm_arena_lend/src
	{ cat $SUPP_DIR_A/${{ env.san-suppress-cfg-in-file1 }} $SUPP_DIR_A/${{ env.san-suppress-cfg-in-file2 }} \
	$SUPP_DIR_B/${{ env.san-suppress-cfg-in-file1 }} $SUPP_DIR_B/${{ env.san-suppress-cfg-in-file2 }} \
	> ${{ env.san-suppress-cfg-file }} 2> /dev/null; } \|\| true
	${{ env.setup-tests-env }}
	./ipc_shm_arena_lend_link_test_srv.exec > logs/ipc_shm_arena_lend_link_test/srv.console.log 2>&1 &
	sleep 1
	./ipc_shm_arena_lend_link_test_cli.exec > logs/ipc_shm_arena_lend_link_test/cli.console.log 2>&1

	- name: Run unit tests
	if: \|
	!cancelled()
	run: \|
	cd ${{ env.install-dir }}/bin
	# Some newline issues with the possible additional args; so need to make a wrapper script
	# and then redirect, as desired, its output.
	cat <<'EOF' > ${{ env.install-dir }}/bin/run_unit_test.sh
	./libipc_unit_test.exec ${{ matrix.build-test-cfg.unit-tests-params }}
	EOF
	mkdir -p logs/libipc_unit_test
	SUPP_DIR_A=${{ github.workspace }}/flow/src
	SUPP_DIR_B=${{ github.workspace }}/ipc_shm_arena_lend/src
	# As of this writing there are TSAN suppressions for this test specifically. TODO: Revist them, and then this.
	SUPP_DIR_OWN=${{ github.workspace }}/test/suite/unit_test
	{ cat $SUPP_DIR_A/${{ env.san-suppress-cfg-in-file1 }} $SUPP_DIR_A/${{ env.san-suppress-cfg-in-file2 }} \
	$SUPP_DIR_B/${{ env.san-suppress-cfg-in-file1 }} $SUPP_DIR_B/${{ env.san-suppress-cfg-in-file2 }} \
	$SUPP_DIR_OWN/${{ env.san-suppress-cfg-in-file1 }} $SUPP_DIR_OWN/${{ env.san-suppress-cfg-in-file2 }} \
	> ${{ env.san-suppress-cfg-file }} 2> /dev/null; } \|\| true
	${{ env.setup-tests-env }}
	/usr/bin/bash -e ${{ env.install-dir }}/bin/run_unit_test.sh \
	> logs/libipc_unit_test/console.log 2>&1

	# For tests below where on failure it can be very helpful to look at higher-verbosity logs,
	# any failing step is repeated with logging hiked up. Note that formally (and practically)
	# higher-than-INFO verbosity is allowed to affect performance and thus is not right for
	# the main integration test run. However on failure all bets are off, and we just want the
	# info we can get. (Also higher-verbosity runs can take significantly longer; no one wants that.)
	#
	# As of this writing unit_test already runs with high verbosity, so we do not re-run on failure
	# like these. The `link_test`s above are very basic tests, essentially there to ensure all built okay
	# and run a sanity-check of a core feature of each of ours libs; so no re-run on failure there either.

	# This follows the instructions in bin/transport_test/README.txt.
	- name: Prepare run script for [transport_test - Scripted mode] variations below
	if: \|
	!cancelled()
	run: \|
	cat <<'EOF' > ${{ env.install-dir }}/bin/run_transport_test_sc.sh
	echo "Log level: [$1]."
	cd ${{ env.install-dir }}/bin/transport_test
	OUT_DIR_NAME=log_level_$1
	OUT_DIR=../logs/transport_test/scripted/$OUT_DIR_NAME
	mkdir -p $OUT_DIR
	SUPP_DIR_A=${{ github.workspace }}/flow/src
	{ cat $SUPP_DIR_A/${{ env.san-suppress-cfg-in-file1 }} $SUPP_DIR_A/${{ env.san-suppress-cfg-in-file2 }} \
	> ${{ env.san-suppress-cfg-file }} 2> /dev/null; } \|\| true
	${{ env.setup-tests-env }}
	./transport_test.exec scripted $OUT_DIR/srv.log info $1 \
	< srv-script.txt > $OUT_DIR/srv.console.log 2>&1 &
	SRV_PID=$!
	sleep 1
	./transport_test.exec scripted $OUT_DIR/cli.log info $1 \
	< cli-script.txt > $OUT_DIR/cli.console.log 2>&1 &
	CLI_PID=$!
	if wait $SRV_PID; then SRV_EC=0; else SRV_EC=$?; fi
	echo "Server finished with code [$SRV_EC]."
	if wait $CLI_PID; then CLI_EC=0; else CLI_EC=$?; fi
	echo "Client finished with code [$CLI_EC]."
	[ $SRV_EC -eq 0 ] && [ $CLI_EC -eq 0 ]
	EOF

	- name: Run integration test [transport_test - Scripted mode]
	id: transport_test_scripted
	if: \|
	!cancelled()
	run: \|
	/usr/bin/bash -e \
	${{ env.install-dir }}/bin/run_transport_test_sc.sh \
	info

	- name: Re-run with increased logging, on failure only
	if: \|
	(!cancelled()) && (steps.transport_test_scripted.outcome == 'failure')
	run: \|
	/usr/bin/bash -e \
	${{ env.install-dir }}/bin/run_transport_test_sc.sh \
	data

	# The following [Exercise mode] tests follow the instructions in bin/transport_test/README.txt.
	# Note that the creation of ~/bin/ex_..._run and placement of executables there, plus
	# /tmp/var/run for run-time files (PID files and similar), is a necessary consequence of
	# the ipc::session safety model for estabshing IPC conversations (sessions).

	- name: Prepare IPC-session safety-friendly run-time environment for [transport_test - Exercise mode]
	if: \|
	!cancelled()
	run: \|
	mkdir -p ~/bin/ex_srv_run ~/bin/ex_cli_run
	mkdir -p /tmp/var/run
	cp -v ${{ env.install-dir }}/bin/transport_test/transport_test.exec \
	~/bin/ex_srv.exec
	cp -v ~/bin/ex_srv.exec ~/bin/ex_cli.exec

	- name: Prepare run script for [transport_test - Exercise mode] variations below
	if: \|
	!cancelled()
	run: \|
	cat <<'EOF' > ${{ env.install-dir }}/bin/run_transport_test_ex.sh
	# Script created by pipeline during job.
	echo "Log level: [$1]."
	echo "Exercise sub-mode: [$2]."
	echo "Sub-mode snippet (none or '-shm-?'): [$3]."
	OUT_DIR=${{ env.install-dir }}/bin/logs/transport_test/exercise/$2
	mkdir -p $OUT_DIR
	SUPP_DIR_A=${{ github.workspace }}/flow/src
	if [ "$3" == '-shm-j' ]; then
	# SHM-jemalloc mode => jemalloc is in fact exercised => suppress libjemalloc stuff.
	# But, nicely, no transport_test-specific suppressions needed as of this writing.
	SUPP_DIR_B=${{ github.workspace }}/ipc_shm_arena_lend/src
	elif [ "$3" == '-shm-c' ]; then
	SUPP_DIR_B=${{ github.workspace }}/test/suite/transport_test/shm-c
	else # if [ "$3" == '' ]; then
	SUPP_DIR_B=${{ github.workspace }}/test/suite/transport_test/heap
	fi
	{ cat $SUPP_DIR_A/${{ env.san-suppress-cfg-in-file1 }} $SUPP_DIR_A/${{ env.san-suppress-cfg-in-file2 }} \
	$SUPP_DIR_B/${{ env.san-suppress-cfg-in-file1 }} $SUPP_DIR_B/${{ env.san-suppress-cfg-in-file2 }} \
	> ${{ env.san-suppress-cfg-file }} 2> /dev/null; } \|\| true
	${{ env.setup-tests-env }}
	~/bin/ex_srv.exec exercise-srv$3 $OUT_DIR/srv.log info $1 \
	> $OUT_DIR/srv.console.log 2>&1 &
	SRV_PID=$!
	sleep 5
	~/bin/ex_cli.exec exercise-cli$3 $OUT_DIR/cli.log info $1 \
	> $OUT_DIR/cli.console.log 2>&1 &
	CLI_PID=$!
	if wait $SRV_PID; then SRV_EC=0; else SRV_EC=$?; fi
	echo "Server finished with code [$SRV_EC]."
	if wait $CLI_PID; then CLI_EC=0; else CLI_EC=$?; fi
	echo "Client finished with code [$CLI_EC]."
	[ $SRV_EC -eq 0 ] && [ $CLI_EC -eq 0 ]
	EOF

	- name: Run integration test [transport_test - Exercise mode - Heap sub-mode]
	id: transport_test_ex_heap
	if: \|
	!cancelled()
	run: \|
	/usr/bin/bash -e \
	${{ env.install-dir }}/bin/run_transport_test_ex.sh \
	info heap

	- name: Re-run with increased logging, on failure only
	if: \|
	(!cancelled()) && (steps.transport_test_ex_heap.outcome == 'failure')
	run: \|
	/usr/bin/bash -e \
	${{ env.install-dir }}/bin/run_transport_test_ex.sh \
	data heap_log_level_data

	- name: Run integration test [transport_test - Exercise mode - SHM-classic sub-mode]
	id: transport_test_ex_shm_c
	if: \|
	!cancelled()
	run: \|
	/usr/bin/bash -e \
	${{ env.install-dir }}/bin/run_transport_test_ex.sh \
	info shm_classic -shm-c

	- name: Re-run with increased logging, on failure only
	if: \|
	(!cancelled()) && (steps.transport_test_ex_shm_c.outcome == 'failure')
	run: \|
	/usr/bin/bash -e \
	${{ env.install-dir }}/bin/run_transport_test_ex.sh \
	data shm_classic_log_level_data -shm-c

	# Disabling this particular test run for the specific case of clang-17 in TSAN (thread sanitizer) config
	# (in particular at least 2 other clangs+TSAN are exercised, so the TSAN coverage is still good).
	# First the reason in detail: This run always fails at this point in the server binary:
	# 2023-12-20 11:36:11.322479842 +0000 [info]: Tguy: ex_srv.hpp:send_req_b(1428): App_session [0x7b3800008180]:
	# Chan B[0]: Filling/send()ing payload (description = [reuse out-message + SHM-handle to modified (unless
	# SHM-jemalloc) existing STL data]; alt-payload? = [0]; reusing msg? = [1]; reusing SHM payload? = [1]).
	# LLVM ERROR: Sections with relocations should have an address of 0
	# PLEASE submit a bug report to https://github.com/llvm/llvm-project/issues/ and include the crash backtrace.
	# Stack dump:
	# 0. Program arguments: /usr/bin/llvm-symbolizer-17 --demangle --inlines --default-arch=x86_64
	# Stack dump without symbol names (ensure you have llvm-symbolizer in your PATH or set the environment var `LLVM_SYMBOLIZER_PATH` to point to it):
	# ...
	# ==77990==WARNING: Can't read from symbolizer at fd 599
	# 2023-12-20 11:36:31.592293322 +0000 [info]: Tguy: ex_srv.hpp:send_req_b(1547): App_session [0x7b3800008180]: Chan B[0]: Filling done. Now to send.
	# Sometimes the exact point is different, depending on timing; but in any case it is always the above
	# TSAN/LLVM error, at which point the thread gets stuck for a long time (10+ seconds); but eventually gets
	# unstuck; however transport_test happens to be testing a feature in a certain way so that a giant blocking
	# operation in this thread delays certain processing, causes an internal timeout, and the test exits/fails.
	# Sure, we could make some changes to the test for that to not happen, but that's beside the point: TSAN
	# at run-time is trying to do something and fails terribly; I have no wish to try to work around that situation;
	# literally it says "PLEASE submit a bug report [to clang devs]."
	#
	# TODO: Revisit; figure out how to not trigger this; re-enable. For the record, I (ygoldfel) cannot reproduce
	# in a local clang-17, albeit with libc++ (LLVM STL) instead of libstdc++ (GNU STL). I've also tried to
	# reduce optimization to -O1, as well as with and without LTO; same result.
	- name: Run integration test [transport_test - Exercise mode - SHM-jemalloc sub-mode]
	id: transport_test_ex_shm_j
	if: \|
	(!cancelled()) && ((matrix.compiler.id != 'clang-17') \|\| (matrix.build-test-cfg.sanitizer-name != 'tsan'))
	run: \|
	/usr/bin/bash -e \
	${{ env.install-dir }}/bin/run_transport_test_ex.sh \
	info shm_jemalloc -shm-j

	- name: Re-run with increased logging, on failure only
	if: \|
	(!cancelled()) && (steps.transport_test_ex_shm_j.outcome == 'failure')
	run: \|
	/usr/bin/bash -e \
	${{ env.install-dir }}/bin/run_transport_test_ex.sh \
	data shm_jemalloc_log_level_data -shm-j

	# See earlier comment block about why we saved all the logs including for console-output-only tests/demos.
	- name: Check test/demo logs for non-fatal sanitizer error(s)
	if: \|
	(!cancelled()) && (matrix.build-test-cfg.sanitizer-name == 'ubsan')
	run: \|
	cd ${{ env.install-dir }}/bin/logs
	# grep returns 0 if 1+ found, 1 if none found, 2+ on error. So check results explicitly instead of -e.
	# Namely, for us, the only OK result is an empty stdout and empty stderr.
	# Otherwise either grep failed (unlikely) or found 1+ problems; either way redirection target will
	# be not-empty, and we will force failure.
	{ grep 'SUMMARY: UndefinedBehaviorSanitizer:' `find . -type f` > san_failure_summaries.txt 2>&1; } \|\| true
	if [ -s san_failure_summaries.txt ]; then
	echo 'Error(s) found. Pipeline will fail. Failures summarized below.'
	echo 'Please peruse uploaded log artifacts, resolve the issues, and run pipeline again.'
	echo '[[[ file--'
	cat san_failure_summaries.txt
	echo '--file ]]]'
	false
	fi
	echo 'No errors found in logs.'

	- name: Package test/demo logs tarball
	if: \|
	always()
	run: \|
	cd ${{ env.install-dir }}/bin
	tar cvzf logs.tgz logs
	rm -rf logs # Save runner space.

	- name: Upload test/demo logs (please inspect if failure(s) seen above)
	if: \|
	always()
	uses: actions/upload-artifact@v3
	with:
	name: ipc-test-logs-${{ matrix.compiler.id }}-${{ matrix.build-test-cfg.id }}
	path: ${{ env.install-dir }}/bin/logs.tgz

	# TODO: Look into the topic of debuggability in case of a crash. Is a core generated? Is it saved?
	# Do we need to manually save it as an artifact? For that matter we would then need the binary and
	# ideally the source. For now we save any logs that are not printed to console, and where possible
	# our tests/demos keep it the console exclusively (but in some cases, such as transport_test, it
	# is not practical due to parallel execution and other aspects). In general it is always better that
	# logs are sufficient; but look into situations where they are not.
	#
	# Don't forget situation where program exits due to a sanitizer reporting problem (ASAN, etc.); is
	# there a core? Do we need one? Etc.
	#
	# Possibly this is all handled beautifully automatically; then this should be deleted.

	doc:
	strategy:
	fail-fast: false
	matrix:
	compiler:
	# Pick a reasonably modern but pre-installed compiler for building Doxygen/etc.
	- id: clang-15
	name: clang
	version: 15
	c-path: /usr/bin/clang-15
	cpp-path: /usr/bin/clang++-15
	build-cfg:
	- id: release
	conan-profile-build-type: Release
	conan-preset: release

	runs-on: ubuntu-22.04

	name: doc-${{ matrix.compiler.id }}-${{ matrix.build-cfg.id }}

	steps:
	- name: Update available software list for apt-get
	run: sudo apt-get update

	- name: Checkout `ipc` repository and submodules (like `flow`)
	uses: actions/checkout@v4
	with:
	submodules: true

	- name: Install Flow-IPC dependencies (like Graphviz) with apt-get
	run: \|
	sudo apt-get install -y graphviz

	- name: Install the latest version of Conan which is less than 2
	run: \|
	pip install "conan<2"

	- name: Create Conan profile
	run: \|
	cat <<'EOF' > conan_profile
	[settings]
	compiler = ${{ matrix.compiler.name }}
	compiler.version = ${{ matrix.compiler.version }}
	compiler.cppstd = 17
	compiler.libcxx = libstdc++11
	arch = x86_64
	os = Linux
	build_type = ${{ matrix.build-cfg.conan-profile-build-type }}

	[conf]
	tools.build:compiler_executables = {"c": "${{ matrix.compiler.c-path }}", "cpp": "${{ matrix.compiler.cpp-path }}"}

	[buildenv]
	CC = ${{ matrix.compiler.c-path }}
	CXX = ${{ matrix.compiler.cpp-path }}

	[options]
	ipc:doc = True
	ipc:build = False
	EOF

	- name: Install Flow-IPC dependencies (like Doxygen) with Conan using the profile
	run: \|
	conan install . \
	--profile:build conan_profile --profile:host conan_profile --build missing

	- name: Generate code documentation using Conan and Doxygen
	run: \|
	conan build .

	- name: Create documentation tarball (full docs, API-only docs, landing page)
	run: \|
	cd ${{ github.workspace }}/doc/ipc_doc
	${{ github.workspace }}/tools/doc/stage_generated_docs.sh \
	${{ github.workspace }}/build/${{ matrix.build-cfg.conan-profile-build-type }}
	# Save runner space.
	rm -rf generated

	- name: Upload documentation tarball
	uses: actions/upload-artifact@v3
	with:
	name: ipc-doc
	path: ${{ github.workspace }}/doc/ipc_doc.tgz

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

To-do added. #525

Workflow file

To-do added. #525

Jobs

Run details

Workflow file for this run