This is a USB I/O PCB for use with Konami Rhythm games. Drop-in support for PHOENIXWAN+ and FAUCETWO controllers. Games currently supported:
- Beatmania IIDX
- Sound Voltex
- Pop'n Music
IIDX
| Input | Board label |
|---|---|
| B1-7 | Obvious enough |
| E1/Start | B8 |
| E2 | B9 |
| E3 | B10 |
| E4/Select | B11 |
| TT photointerruptor 1 | DAO_E1P1 |
| TT photointerruptor 2 | DAO_E1P2 |
| TT RGB LEDs | TT_LED |
| Bar RGB LEDs | DAO_BAR |
SDVX
| Input | Board label |
|---|---|
| BT-A | B1 |
| BT-B | B2 |
| BT-C | B3 |
| BT-D | B4 |
| FX-L | B5 |
| FX-R | B6 |
| Start | B9 |
| AC-style knobs | SDVX1 and SDVX2 |
The web config tool allows you to quickly configure multiple settings, reset them to default values or flash firmware onto your beef board.
Alternatively, various configuration options can be changed on-the-fly by holding a button combination. Holding the buttons simultaneously for 1 second will cause the change to take affect. Button lights will momentarily shut off to indicate that the change has occurred.
Refer to these tables for a list of configuration options currently supported:
| Configuration option | Button combination |
|---|---|
| Reverse TT direction | B1 + B7 + B8 |
| Change TT lighting effects | B2 + B8 + B11 |
| Increase TT deadzone | B7 + B8 + B11 |
| Decrease TT deadzone | B5 + B8 + B11 |
| Increase TT sensitivity | B3 + B8 + B11 |
| Decrease TT sensitivity | B1 + B8 + B11 |
| Change centre bar lighting effects (PHOENIXWAN only) | B6 + B8 + B10 |
| Disable LEDs | B4 + B8 + B11 |
| Change turntable hue | B2 + B11 + TT |
| Change turntable saturation | B4 + B11 + TT |
| Change turntable brightness | B6 + B11 + TT |
Note: TT deadzone only affects digital TT output.
| Configuration option | Button combination |
|---|---|
| Disable LEDs | B1 + B2 + B3 + B4 + B9 |
There also exist button combinations which perform special actions if held while connecting the device:
| Special action | Button combination |
|---|---|
| Enter programming mode | B1 + B2 |
| IIDX mode - HID (default) | B1 + B8 |
| IIDX mode - Keyboard | B2 + B8 |
| SDVX mode - HID | B1 + B9 |
| SDVX mode - Keyboard | B2 + B9 |
### PIN HEADERS ###
1 JST XH 5pin
15 JST XH 4pin
6 JST XH 3pin
2 JST XH 2pin
1 JST PH 2pin
2 JST PH 3pin
2 1x2 2.54mm pin header
1 IDC header 2x3pin 2.54mm (optional)
### MCU ###
1 AT90USB1286 TQFP
1 16MHz crystal (ECS-160-18-4X-CKM)
11 2N7002
1 6mm push button
### CAPACITORS ###
2 1uF 0805
5 100nF 0805
2 10pF 0805
### RESISTORS ###
1 1K 0805
2 22 ohm 0805
### REMOTE BOARD ###
2 JST XH 4pin (angled)
2 USB-B (ED2983-ND)
- HW design by HWXLR8
- FW written by HWXLR8 / supervaka / ASleepyCat
- HID implementation provided by the LUFA project
- Implementation of the WS2812 protocol provided by FastLED
- kinetic-flow's arcin-infinitas for:
- RGB HID functionality
- FastLED shims
- Debounce code
- dfu-programmer for serving as the reference implementation for the Atmel DFU protocol
- Special thanks to Mechada and Cryto for beta testing
