Skip to content

Latest commit

 

History

History
630 lines (420 loc) · 23.5 KB

wireguard-vpn.md

File metadata and controls

630 lines (420 loc) · 23.5 KB
Raw
title parent grand_parent nav_exclude has_toc layout
Wireguard VPN
+ System
Bonus Section
true
false
title description tableOfContents outline pagination
visible
true
visible
visible
true
visible
true
visible
true

WireGuard: a simple yet fast VPN

The following guide was derived from contributions by Pantamis

WireGuard is a VPN you can set up to access your MiniBolt from the outside. It makes it easier to run services on your node without exposing its ports to the public Internet. It has support on all major computer OS; and apps for Android and iOS. The only requirement is to forward a UDP port from your home router to the MiniBolt node.

{% hint style="danger" %} Difficulty: Hard {% endhint %}

Acknowledgments

Why use WireGuard and trade-off

A VPN is an encrypted tunnel between two computers over the internet. In our case, MiniBolt will play the role of the server, and you will be able to access your home network from outside with configured client devices. Several trade-offs are using a VPN versus using Tor.

Advantages:

  • The connection with the VPN is a lot faster than using Tor (Bitcoin Core and LND will still use Tor)
  • WireGuard has an incredibly low resource usage.
  • The attack surface on your home network and MiniBolt is reduced as fewer ports are open on your router.

Disadvantages:

  • However, a VPN is not anonymous, a spy can see that you send encrypted traffic to your home router, but he cannot know what you are doing.
  • WireGuard is not censorship-resistant. The encrypted byte headers contain identifiable data which allows telling that you are using WireGuard VPN.
  • You need to open one port on your router.

Prerequisites

Before starting with the installation proper, you need to:

  1. Figure out if your Internet Service Provider (ISP) uses Carrier-Grade NAT. If that's the case you have no way of doing port forwarding, and you'll need to contact them asking to put you out of CG-NAT (this means giving your router a dedicated public IP). Most ISPs simply do this on request or charge a small fee to allocate a public IP just for you
  2. Figure out the public IP of your home network. If you have a static public IP it'll simplify the setup, but it's not mandatory. There are plenty of websites that show you your public IP. One such site is https://whatismyipaddress.com
  3. Forward the "51820" port and "UDP" protocol of your router to the local IP of your MiniBolt. This procedure changes from router to router so we can't be very specific, but involves logging into your router's administrative web interface (usually at http://192.168.1.1 or http://192.168.0.1) and finding the relevant settings page. See portforward.com for directions on how to port forward with your NAT/router device. The configuration procedure will depend on the specific type of router which is why we can't provide a tutorial for all of them. However, in the extra Port forwarding section, you can show a few instructions to do this for the most common cases

📝 In the next steps, we will create different keys, IDs, passwords, and others, remember to take note of all of those in your preferred password manager (Bitwarden, Keypass) or an offline document paper:

Server keys:

<Your_Server_Private_Key>

<Your_Server_Public_Key>

Client keys:

<Your_Client_Private_Key>

<Your_Client_Public_Key>

Desec provider data:

  • Desec email: email
  • Desec password: password
  • TOKEN: <YOUR_SECRET_TOKEN>
  • Domain: <yoursubdomain.dedyn.io>

Set up Dynamic DNS

Unless you have a static IP (unlikely if it is a residential IP) your ISP can change it at any minute, thus breaking the setup we will make.

To fix this, we can maintain a DNS record that always points to your latest IP, and the WireGuard clients can use that instead of the IP.

Now we are going to execute a universal way of configuring our IP by updating it to the dynamic DNS provider using the MiniBolt node via a script, but this job can be done by your router, especially if we are not sure that we are going to have MiniBolt running 24/7. Go to the Use your router’s DDNS preconfigured provider extra section.

{% hint style="info" %} If you have a contracted static IP on your ISP, you can log in to the MiniBolt directly, go to the configure firewall section, and continue with the guide from there. {% endhint %}

Desec registration

  • Go to Desec official webpage and fill out the first form with this:

    1. Type your preferred email

    2. Select the "dynDNS account" box

    3. Hit the "CREATE ACCOUNT" button

You'll see the following form:

  • Ensure to keep selecting the second option Register a new domain under dedyn.io (dynDNS).
  • For this demo, I've typed yoursubdomain, but you can use anything memorable to you as long as no one has already taken that name. We'll it call "<yoursubdomain.dedyn.io>" from now on.
  • Complete the "CAPTCHA" and check the box "Yes, I agree to the..." option, and click on the "SIGN UP" button.

After this, deSEC will email you to confirm the address. It will contain a verification link that will send you to this page:

  • Take note of the "Token secret", you'll need it later as "<YOUR_SECRET_TOKEN>"

5. Click on the "ASSIGN ACCOUNT PASSWORD" button down below to lock down your account.

  • Type again your email, complete the "CAPTCHA" and click on the "RESET PASSWORD" button.

This will prompt deSEC to send you another email with another link that will let you set your account password.

6. After all that is done, click LOG IN and use your email and the password set before.

{% hint style="info" %} Keep this dashboard open, you'll need to come back here later. {% endhint %}

Server configuration (part 1)

Dynamic IP script

Now we'll write a Bash script for MiniBolt that will periodically poll its own IP and send it to deSEC. We'll need the "<YOUR_SECRET_TOKEN>" and "<yoursubdomain.dedyn.io>" from the deSEC registration step.

  • As admin user, log in to MiniBolt, and create the following script
sudo nano /opt/dynamic-ip-refresh.sh
  • Replace "<yoursubdomain.dedyn.io>" and "<YOUR_SECRET_TOKEN>" for the before created. Save and exit
#!/usr/bin/env bash

set -euo pipefail

DEDYN_DOMAIN=<yoursubdomain.dedyn.io>
DEDYN_TOKEN=<YOUR_SECRET_TOKEN>

CURRENT_IP=$(curl -s https://api.ipify.org/)

curl -i -s \
  -H "Authorization: Token ${DEDYN_TOKEN}" \
  -X GET "https://update.dedyn.io/?hostname=${DEDYN_DOMAIN}&ip=${CURRENT_IP}"
  • After creating the script, make it executable and restrict access to it (because it contains sensitive data)
sudo chmod 700 /opt/dynamic-ip-refresh.sh
  • Create a crontab entry for root to run it every 2 minutes. Type "1" and press enter to choose the "nano" editor
sudo crontab -e
  • Add the next line at the end of the file. Save and exit
*/2 * * * *     /opt/dynamic-ip-refresh.sh

{% hint style="info" %} Keep the MiniBolt SSH session on the terminal opened to go back later, return to deSEC web page, ensure you are on the "DOMAIN MANAGEMENT" tab, and click on your domain {% endhint %}

Wait 2 minutes, and refresh the page, you should see a new "type A" DNS record entry with your public IP address, created automatically

{% hint style="success" %} You now have a free domain that always points to your existing public IP address. Now you can log out of the Desec webpage by clicking on the "LOG OUT" button on the top right, we won't need it anymore {% endhint %}

Configure Firewall

  • Return to the MiniBolt SSH session to continue configuring it. Allow incoming Wireguard requests from outside the Firewall
sudo ufw allow 51820/udp comment 'allow WireGuard VPN from anywhere'

{% hint style="danger" %} Remember to have forwarded the "51820" port and the "UDP" protocol of your router to the local IP of your MiniBolt, previously indicated in the prerequisites section and following the Port Forwarding extra section {% endhint %}

Install WireGuard VPN on server

  • Update the packages and upgrade to keep up to date with the OS
sudo apt update && sudo apt full-upgrade
  • Install the WireGuard VPN package
sudo apt install wireguard

Generate server key pair

  • Now we are going to generate our server key pair. The following command is to generate a private key
wg genkey | tee private_key

Private key example expected output, we'll call "<Your_Server_Private_Key>" from now on

e.g: mJFGKxeQqxafyDdLDEDHRml6rDJUs7JZte3uqfJBQ0Q=

📝 Take note and securely backup this private key in your preferred password manager (Bitwarden, Lastpass, Keypass...)

  • Now obtain the public key related to the private key
sudo cat private_key | wg pubkey | tee public_key

Public key example expected output, we'll call "<Your_Server_Public_Key>" from now on

e.g: GOQi4j/yvmu/7f3cRvFZwlXvnWS3gRLosQbjrb13sFY=

📝 Take note and backup this public key in your preferred password manager (Bitwarden, Lastpass, Keypass...)

  • Create wg0.conf file
sudo nano /etc/wireguard/wg0.conf
  • Write the following content and replace only <Your_Server_Private_Key> with the data previously obtained. <Your_Client_Public_Key> will be replaced later when we get the public key from our client, keep alert to replace it later in part 2 of the server configuration
# MiniBolt: Wireguard configuration
# /etc/wireguard/wg0.conf

## Server configuration (Minibolt node)
[Interface]
PrivateKey = <Your_Server_Private_Key>
Address = 10.0.0.1/24
ListenPort = 51820

## Client configuration
[Peer]
PublicKey = <Your_Client_Public_Key>
AllowedIPs = 10.0.0.2/32

{% hint style="info" %} Replace "<Your_Server_Private_Key>" {% endhint %}

  • Enable autoboot on startup (optional, but recommended)
sudo systemctl enable [email protected]

{% hint style="info" %} This will turn it on permanently, and also start it automatically when MiniBolt reboots. We won't do this on the client because we want it to be able to connect to the VPN selectively {% endhint %}

  • Delete the private_key and public_key files, but ensure before you take note of the server's keys in your preferred password manager
sudo rm /home/admin/private_key && rm /home/admin/public_key

{% hint style="info" %} Keep the MiniBolt SSH session open in the terminal to come back later {% endhint %}

Install WireGuard VPN on Client

Now, on your client (on a regular computer, regular mobile, tablet, etc...), start by visiting WireGuard's installation page and download and install the relevant version of WireGuard for your OS. Here, we'll assume your client is a Linux desktop OS; because it is the most similar to setting up the server, but you can see Mobile or Windows configurations in the extra section.

  • On your Linux regular computer, for instance, you do this by simply installing the "Wireguard VPN" package
sudo apt install wireguard

Generate client key pair

  • Now we are going to generate our client key pair. The following command is to generate a private key
wg genkey | tee private_key

Private key example expected output, we'll call "<Your_Client_Private_Key>" from now on

e.g: GGH/UCK3K9qzd48u8m872azvsdeyaSjs9cVs0pl4fko=

📝 Take note and securely backup this private key in your preferred password manager (Bitwarden, Lastpass, Keypass...)

  • Now obtain the public key related to the private key
cat private_key | wg pubkey | tee public_key

Public key example expected output, we'll call "<Your_Client_Public_Key>" from now on

e.g: pNfWyNJ9WnbMqlLzHxwhvGnZ0/alT18MGy6K0iOxHCI=

📝 Take note and securely backup this private key in your preferred password manager (Bitwarden, Lastpass, Keypass...)

Client configuration (part 1)

  • Create wg0.conf file
sudo nano /etc/wireguard/wg0.conf
  • Write the following contents to the wg0.conf file
## Client configuration
[Interface]
PrivateKey = <Your_Client_Private_Key>
Address = 10.0.0.2/32

## Server configuration (MiniBolt node)
[Peer]
PublicKey = <Your_Server_Public_Key>
AllowedIPs = 10.0.0.1/32
Endpoint = <yoursubdomain.dedyn.io>:51820

📝 A few things to note here:

Replace "PrivateKey" parameter designed as "Your_Client_Private_Key" by created previous step.

Replace "PublicKey" parameter designed as "Your_Server_Public_Key" by the public key of MiniBolt created on the generate key pair section.

Replace "Endpoint" parameter designed as "yoursubdomain.dedyn.io"** by created in Desec registration section.

  • Now you can delete the private_key and public_key files from the disk, but make sure you have noted this previously
sudo rm /home/<yourusername>/private_key && rm /home/<yourusername>/public_key

{% hint style="info" %} Keep this terminal open to come back later {% endhint %}

Server configuration (part 2)

Now return to the MiniBolt node to allow access to the newly created Wireguard VPN client.

  • Ensure you are logged in as admin user, and edit the "wg0.conf" file
sudo nano /etc/wireguard/wg0.conf

Now we are going to complete the previous parameter <Your_Client_Public_Key> that we left pending to complete before with the created in the "generate client key pair" section

  • Replace the existing <Your_Client_Public_Key> parameter with your one
# MiniBolt: Wireguard configuration
# /etc/wireguard/wg0.conf

## Client configuration
[Peer]
PublicKey = <Your_Client_Public_Key>
AllowedIPs = 10.0.0.2/32
  • Start Wireguard VPN on MiniBolt
sudo systemctl start [email protected]
  • Check the VPN server status using
sudo wg show

Example of expected output:

interface: wg0
public key: <Your_Server_Public_Key>
private key: (hidden)
listening port: 51820

peer: <Your_Client_Public_Key>
endpoint: ClientPublicIP:<randomPort>
allowed ips: 10.0.0.1/32
latest handshake: 1 minute, 4 seconds ago
transfer: 655.58 KiB received, 39.35 KiB sent
  • Ensure that service is working and listening at the default 51820 ports
sudo ss -tulpn | grep 51820

Expected output:

udp   UNCONN 0      0                0.0.0.0:51820      0.0.0.0:*
udp   UNCONN 0      0                   [::]:51820         [::]:*
  • Check the systemd journal to see Wireguard VPN real-time updates output logs
journalctl -fu [email protected]

{% hint style="success" %} Now the server is ready to allow connection from the Wireguard VPN client {% endhint %}

Client configuration (part 2)

  • Return to the Linux client to finally test the VPN MiniBolt connection running this command
wg-quick up wg0

Expected output:

[#] ip link add wg0 type wireguard
[#] wg setconf wg0 /dev/fd/63
[#] ip -4 address add 10.0.0.2/32 dev wg0
[#] ip link set mtu 1420 up dev wg0
[#] ip -4 route add 10.0.0.1/32 dev wg0

{% hint style="info" %} Try to create a new SSH session to the MiniBolt, using this time the VPN IP instead of the local IP address {% endhint %}

ssh [email protected]

{% hint style="info" %} Try to navigate to web services such as BTC RPC Explorer, and open your favorite browser, using this time the VPN IP instead of the local IP address: https://10.0.0.1:4000 {% endhint %}

  • Check the VPN client status using
sudo wg show

Expected output:

interface: wg0
public key: <Your_Client_Public_Key>
private key: (hidden)
listening port: <randomPort>

peer: <Your_Server_Public_Key>
endpoint: ServerPublicIP:51820
allowed ips: 10.0.0.1/32
latest handshake: 1 minute, 4 seconds ago
transfer: 655.58 KiB received, 39.35 KiB sent

To turn the VPN connection off, use

wg-quick down wg0

Expected output:

[#] ip link delete dev wg0

Extras (optional)

Install & configure the WireGuard VPN Client on a mobile phone

Entering all information about the Wireguard VPN Client into a mobile phone is particularly cumbersome. A nice feature of the mobile Wireguard apps is that they can import the full configuration for a tunnel through a QR code format.

To do that you need to install the qrencode package on your regular computer with Linux and Wireguard VPN client installed as we explained previously in the client configuration section.

sudo apt install qrencode

{% hint style="success" %} Now, you can convert the "wg0.conf" file to a QR code like so {% endhint %}

  • Change to root user to create a temporary root session
sudo su
  • Generate the QR code related to the same Wireguard VPN client "wg0.conf" configurated on the client configuration section
qrencode -t ansiutf8 < /etc/wireguard/wg0.conf
  • Exit root user session
exit

{% hint style="info" %} Keep the MiniBolt SSH session open in the terminal to come back later and scan the Qr code. {% endhint %}

  • Install the Wireguard VPN client for the mobile version and start it

Link to iOS | Link to Android | F-Droid

  1. Hit on (+) button
  2. Select the "SCAN FROM QR CODE" option. It will ask for camera permission, then you should be able to scan your code. Press ALLOW
  3. Scan the QR code generated previously
  4. Type a name for the tunnel, e.g. "MiniBolt_WG", and hit on "Create tunnel"
  5. Press on the switch at the right to activate the Wireguard tunnel. Press OK to accept the connection request

{% hint style="info" %} You could create a Wireguard VPN client connection manually from scratch filling in the form with the content of "wg0.conf" configured on the client configuration section. Select "CREATE FROM SCRATCH" instead of "SCAN FROM QR CODE" on the second step, fill out the form, and hit on the diskette icon on the top right to save and follow the same steps from 4 {% endhint %}

Install & configure the WireGuard VPN Client on Windows

  • Download and install the Wireguard VPN Windows version
  • Hit on the little arrow down on the bottom left and select "Add empty tunnel"

  • Paste the entire content of the client configuration "wg0.conf" file in the big text box and push on "Save"
  • Click on the "Activate" button to enable the VPN connection
  • Test it by creating a new SSH connection to MiniBolt for example, this time with the VPN IP address

Configure additional clients

For each additional client, you must install the WireGuard software in each of them, and generate a new client key pair following the before section and following all client configuration-related sections.

Configure additional servers

At this point, we have defined a Virtual Private Network in the 10.0.0.1/24 network range, where MiniBolt is at 10.0.0.1 and your client is at 10.0.0.2. You could use any other private IP range.

  • Another additional server would define it for example as 10.0.1.1/24 where 10.0.1.1 would be the additional server and 10.0.1.2 for the clients in this case
  • If you want to set additional servers on the same LAN, you also have to define a different external port on port forwarding of the router, e.g 51821, and point your Wireguard VPN Client to the 51821 port on the endpoint configuration: Endpoint = <yoursubdomain.dedyn.io>:51821

Use your router’s DDNS preconfigured provider

Some routers have support for Dynamic DNS providers like NO-IP or deSEC, out of the box, and you just need to select the right option (deSEC, desec.io, dedyn, NoIP, dynDNS, or similar). It would be a great idea if your MiniBolt server won't be running 24/7, but it's probably your router yes.

If your router does not have your DDNS provider preconfigured, the configuration procedure will depend on the specific type of router which is why we can't provide a tutorial for all of them. However, most of the time it boils down to entering the following details in your router configuration.

🔍 Search for some section called dynDNS, DDNS, Dynamic DNS, or similar, and set them with these instructions:

  • Provider/Service: select on the drop-down the name of the provider, e.g. noip, www.no-ip.com, dynDNS, etc
  • Domain name/hostname: subdomain you want to update, e.g. <yoursubdomain.dedyn.io> previously created an account on desec registration section
  • Username: selected username or email (depending on the provider) of the previously created account on desec registration section
  • Password/Token secret: password selected for your DDNS provider account or Token secret (depending on the provider) previously created account on desec registration section

{% hint style="success" %} Save and apply changes {% endhint %}

Port forwarding

Port forwarding, allows you to direct incoming traffic from the WAN side (identified by Protocol and External port) to the Internal server with the private IP address on the LAN side.

🔍 Search for some section called NAT/PAT, Virtual Servers, Port forwarding, or similar and set these parameters:

  • Server name/Rule name: e.g MiniBolt_WG
  • External port: 51820 (this parameter should be different if different external ports need to be converted to the same port number used by the server on the LAN side), e.g: different Wireguard servers on the same LAN
  • Internal port (optional in some cases): 51820
  • Protocol: UDP
  • Server IP address: MiniBolt IP address, e.g: 192.168.X.XXX
  • WAN interface (some cases): ppp0.1 or similar

{% hint style="success" %} Save and apply changes {% endhint %}

Port reference

Port Protocol Use
51820 UDP Default port