Merge pull request #63 from IGEL-Community:wireguard-code-for-profile

wireguard code for profile

CP_Source/Network/WireGuard_VPN_Client/README.md

@@ -89,3 +89,122 @@ systemctl enable systemd-resolved.service && ln -s /usr/bin/resolvectl /usr/bin/
 [Tailscale](https://github.com/IGEL-Community/IGEL-Custom-Partitions/tree/master/CP_Source/Network/Tailscale_VPN) is built on top of WireGuard and acts as a holder of public keys, network ports, and private IP addresses.
 
 [Tailscale post on WireGuard](https://tailscale.com/compare/wireguard/)
+
+-----
+
+## WireGuard code in Profile (Sample)
+
+- Added additional check to determine whether the client is on the internal network. If it is, nothing happens; if not, WireGuard is automatically started.
+
+```bash linenums="1"
+timeout 3 bash -c "</dev/tcp/172.29.30.240/8443" > /dev/null 2>&1
+```
+
+- Current code to add to profile:
+
+```bash linenums="1"
+mkdir -p /wfs/wireguard; chmod 700 /wfs/wireguard; cat << 'EOF' > /wfs/wireguard/igel_wg_setup.sh
+ACTION="wireguard_setup_${1}"
+WFS_WG=/wfs/wireguard
+ETC_WG=/etc/wireguard
+
+if [ ! -e ${WFS_WG}/privatekey ]; then
+  wg genkey | tee ${WFS_WG}/privatekey | wg pubkey | tee ${WFS_WG}/publickey
+  WG_PUBKEY=$(cat ${WFS_WG}/publickey)
+  setparam system.remotemanager.ums_structure_tag ${WG_PUBKEY}
+  write_rmsettings
+fi
+
+cp ${WFS_WG}/privatekey ${ETC_WG}/privatekey
+cp ${WFS_WG}/publickey ${ETC_WG}/publickey
+cp ${WFS_WG}/wg0.conf ${ETC_WG}/wg0.conf
+
+HOSTNAME=$(hostname)
+HOST_PRIVATEKEY=$(cat ${ETC_WG}/privatekey)
+
+sed -i "s|CLIENT_PRIVATE_KEY|${HOST_PRIVATEKEY}|" ${ETC_WG}/wg0.conf
+sed -i "s|WG_PUBLIC_KEY|${WG_PUBLIC_KEY}|" ${ETC_WG}/wg0.conf
+sed -i "s|WG_PRESHARE_KEY|${WG_PRESHARE_KEY}|" ${ETC_WG}/wg0.conf
+sed -i "s|WG_PUBLIC_ADDRESS|${WG_PUBLIC_ADDRESS}|" ${ETC_WG}/wg0.conf
+sed -i "s|WG_PORT|${WG_PORT}|" ${ETC_WG}/wg0.conf
+sed -i "s|WG_ALLOWED_IPS|${WG_ALLOWED_IPS}|" ${ETC_WG}/wg0.conf
+
+cat ${WFS_WG}/wg_clients.csv| while read LINE
+  do
+    CURR_HOST=$(echo ${LINE} | awk --field-separator "," '{print $1}')
+    if [ ${HOSTNAME} = ${CURR_HOST} ]; then
+      CURR_HOST_ADDR=$(echo ${LINE} | awk --field-separator "," '{print $2}')
+      sed -i "s|CURR_HOST_ADDR|${CURR_HOST_ADDR}|" ${ETC_WG}/wg0.conf
+    fi
+  done
+
+chmod 400 /etc/wireguard/*
+chmod 400 /wfs/wireguard/*
+chmod 500 /wfs/wireguard/igel_wg_setup.sh
+EOF
+
+cat << 'EOF' > /wfs/wireguard/wg_clients.csv
+ITC841B7795DB2F,10.0.0.2/32
+EOF
+
+cat << 'EOF' > /wfs/wireguard/wg0.conf
+[Interface]
+PrivateKey = CLIENT_PRIVATE_KEY
+Address = CURR_HOST_ADDR
+[Peer]
+PublicKey = WG_PUBLIC_KEY
+PresharedKey = WG_PRESHARE_KEY
+Endpoint = WG_PUBLIC_ADDRESS:WG_PORT
+AllowedIPs = WG_ALLOWED_IPS
+EOF
+
+cat << 'EOF' > /bin/igel_wg_control.sh
+#!/bin/bash
+ACTION="WireGuard_Control"
+LOGGER="logger -it ${ACTION}"
+
+if [ -e /etc/wireguard/wg0.conf ]; then
+  WG_UP=$(wg show | grep endpoint | wc -l)
+else
+  zenity --error --width=200 --height=100 --title="WireGuard VPN" --text="WireGuard VPN is NOT setup on this system."
+  exit 1
+fi
+
+if [ $WG_UP -ge 1 ]; then
+  # Verbindung ist aktiv -> Trennen anbieten
+  zenity --question --width=200 --height=100 --title="WireGuard VPN ist aktiv!" --text="Verbindung trennen?" --ok-label="Nein" --cancel-label="Ja"
+  RETURN_CODE=$?
+  if [ $RETURN_CODE -eq 1 ]; then
+    wg-quick down wg0
+    zenity --info --width=200 --height=100 --title="WireGuard VPN" --text="WireGuard VPN wurde getrennt."
+  fi
+else
+  zenity --question --width=200 --height=100 --title="WireGuard VPN ist deaktiviert!" --text="Verbindung aufbauen?" --ok-label="Nein" --cancel-label="Ja"
+  RETURN_CODE=$?
+  if [ $RETURN_CODE -eq 1 ]; then
+    wg-quick up wg0
+    zenity --info --width=200 --height=100 --title="WireGuard VPN" --text="WireGuard VPN ist jetzt aktiv."
+  fi
+fi
+EOF
+
+chmod 400 /wfs/wireguard/*
+chmod 500 /wfs/wireguard/igel_wg_setup.sh
+chmod a+x /bin/igel_wg_control.sh
+/wfs/wireguard/igel_wg_setup.sh
+
+timeout 3 bash -c "</dev/tcp/172.29.30.240/8443" > /dev/null 2>&1
+if [ $? -eq 0 ]; then
+    exit 0
+else
+    if [ -e ${WG_CONF} ]; then
+        wg-quick up wg0 > /dev/null 2>&1
+    fi
+fi
+```
+
+**NOTE:** Future items to be worked on include:
+
+- Add notifications to confirm when the connection has been successfully established.
+- Include a warning if the network isn’t connected, suggesting either a manual or automatic connection rebuild.
+- Optimize the execution to ensure the script runs minimally – only once the setup has completed previously and then again only if changes are detected.