Colortils.nvim - Neovim color utils

Screen.Recording.2022-08-29.at.17.20.01.mov

✨ Features

• rgb color picker
  • Export in different formats
    • rgb
    • hex
    • hsl
  • Transparency support for picking, previewing and exporting
• Lighten and darken colors
• Convert colors to greyscale or something between the color and it's grey version
• Pick a color on a gradient between two colors
• Export from any of the mentioned tools above to other ones
• Replace color under cursor
• Some utilities for css colors
  • List Colors

📦 Installation

Use you favourite package manager and call the setup function.

use {
  "max397574/colortils.nvim",
  cmd = "Colortils",
  config = function()
    require("colortils").setup()
  end,
}

⚙️ Customization

You can change the settings by passing options to the setup function. This is the default configuration:

require("colortils").setup({
    -- Register in which color codes will be copied
    register = "+",
    -- Preview for colors, if it contains `%s` this will be replaced with a hex color code of the color
    color_preview =  "█ %s",
    -- The default in which colors should be saved
    -- This can be hex, hsl or rgb
    default_format = "hex",
    -- Border for the float
    border = "rounded",
    -- Some mappings which are used inside the tools
    mappings = {
        -- increment values
        increment = "l",
        -- decrement values
        decrement = "h",
        -- increment values with bigger steps
        increment_big = "L",
        -- decrement values with bigger steps
        decrement_big = "H",
        -- set values to the minimum
        min_value = "0",
        -- set values to the maximum
        max_value = "$",
        -- save the current color in the register specified above with the format specified above
        set_register_default_format = "<cr>",
        -- save the current color in the register specified above with a format you can choose
        set_register_cjoose_format = "g<cr>",
        -- replace the color under the cursor with the current color in the format specified above
        replace_default_format = "<m-cr>",
        -- replace the color under the cursor with the current color in a format you can choose
        replace_choose_format = "g<m-cr>",
        -- export the current color to a different tool
        export = "E",
        -- set the value to a certain number (done by just entering numbers)
        set_value = "c",
        -- toggle transparency
        transparency = "T",
        -- choose the background (for transparent colors)
        choose_background = "B",
    }
})

The row on which you are currently is highlighted with ColortilsCurrentLine. You can modify that to change the way the tools look.

👀 Tools

Supported Formats

Supported formats are the following:

• rgb/rgba (both with percentage and absolute values, e.g. rgb(255, 255, 0)/rgb(100%, 100%, 0%, 0.5))
• hex (#FFAB00)
• hsl/hsla (hsl(60, 100%, 50%), hsla(60, 100%, 50%, 0.4))
• Css color names (only as argument)

Usage

You can use the different tools with commands. Those take the format Colortils <tool> <color>. The color can be any of the supported formats. Notice that symbols like #, % and space need to be escaped like e.g. this \#FF00AB.

If no valid color is provided as argument the color under the cursor (if available) will be used. If there isn't any found the user will be asked for input (notice that you don't need to escape characters there).

Mappings

You can use h/l and the mappings specified in the config to increment and decrement values or pick a position on a gradient. With 0 and $ to go to the minimum and the maximum values instantly.

With q you can close the tools.

With most tools you can use <cr> to save the currently selected color to the register speicified in the config. If this isn't the case or something is special it will be written below. You can use g<cr> to get a prompt in which you can choose the format.

With <m-cr>/g<m-cr> you can replace the color under the cursor instead of copying into a register.

You can use E to export the currently selected color to a different tool and modify it there.

Transparency mode

You can use T to toggle transparency mode. This will add another slider where you can choose the transparency. The preview and the color you'll export will change accordingly.

You can use B to change the background which is used to produce the transparent colors.

Color Picker

Colortils picker <color>

Saving color

You can use <cr> to save the color into the register specified in the config. The default format (specified in the config) will be used.

You can use g<cr> to get prompted to choose a color format in which the color then will be saved to the register.

Lighten color

Colortils lighten <color>

Darken color

Colortils darken <color>

Color to greyscale

Colortils greyscale <color>

Pick color on gradient

Colortils gradient <color1> <color2>

List css colors

Colortils css list

Similar Plugins

This plugin has some things which are similar to vim-colortemplate.

❤️ Support

If you like the projects I do and they can help you in your life you can support my work with github sponsors. Every support motivates me to continue working on my open source projects.