Merge remote-tracking branch 'remotes/philmd-gitlab/tags/avr-port-202…

…00711' into staging 8bit AVR port from Michael Rolnik. Michael started to work on the AVR port few years ago [*] and kept improving the code over various series. List of people who help him (in chronological order): - Richard Henderson - Sarah Harris and Edward Robbins - Philippe Mathieu-Daudé and Aleksandar Markovic - Pavel Dovgalyuk - Thomas Huth [*] The oldest contribution I could find on the list is from 2016: https://lists.nongnu.org/archive/html/qemu-devel/2016-06/msg02985.html Tests included: $ avocado --show=app run -t arch:avr tests/acceptance/ Fetching asset from tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos (1/1) tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos: PASS (2.13 s) RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0 JOB TIME : 2.35 s $ make check-qtest-avr TEST check-qtest-avr: tests/qtest/boot-serial-test TEST check-qtest-avr: tests/qtest/cdrom-test TEST check-qtest-avr: tests/qtest/device-introspect-test TEST check-qtest-avr: tests/qtest/machine-none-test TEST check-qtest-avr: tests/qtest/qmp-test TEST check-qtest-avr: tests/qtest/qmp-cmd-test TEST check-qtest-avr: tests/qtest/qom-test TEST check-qtest-avr: tests/qtest/test-hmp TEST check-qtest-avr: tests/qtest/qos-test CI results: . https://cirrus-ci.com/build/5697049146425344 . https://gitlab.com/philmd/qemu/-/pipelines/165328058 . https://travis-ci.org/github/philmd/qemu/builds/705817933 . https://app.shippable.com/github/philmd/qemu/runs/822/summary/console # gpg: Signature made Sat 11 Jul 2020 10:03:11 BST # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <[email protected]>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd-gitlab/tags/avr-port-20200711: (32 commits) target/avr/disas: Fix store instructions display order target/avr/cpu: Fix $PC displayed address target/avr/cpu: Drop tlb_flush() in avr_cpu_reset() target/avr: Add section into QEMU documentation tests/acceptance: Test the Arduino MEGA2560 board tests/boot-serial: Test some Arduino boards (AVR based) hw/avr: Add limited support for some Arduino boards hw/avr: Add some ATmega microcontrollers hw/avr: Add support for loading ELF/raw binaries hw/misc: avr: Add limited support for power reduction device hw/timer: avr: Add limited support for 16-bit timer peripheral hw/char: avr: Add limited support for USART peripheral tests/machine-none: Add AVR support target/avr: Register AVR support with the rest of QEMU target/avr: Add support for disassembling via option '-d in_asm' target/avr: Initialize TCG register variables target/avr: Add instruction translation - CPU main translation function target/avr: Add instruction translation - MCU Control Instructions target/avr: Add instruction translation - Bit and Bit-test Instructions target/avr: Add instruction translation - Data Transfer Instructions ... Signed-off-by: Peter Maydell <[email protected]>
OSLL · Jul 11, 2020 · d344983 · d344983
2 parents 2033cc6 + 19b2934
commit d344983
Show file tree

Hide file tree

Showing 49 changed files with 7,172 additions and 1 deletion.
diff --git a/MAINTAINERS b/MAINTAINERS
@@ -167,6 +167,14 @@ S: Maintained
 F: hw/arm/smmu*
 F: include/hw/arm/smmu*
 
+AVR TCG CPUs
+M: Michael Rolnik <[email protected]>
+R: Sarah Harris <[email protected]>
+S: Maintained
+F: gdb-xml/avr-cpu.xml
+F: target/avr/
+F: tests/acceptance/machine_avr6.py
+
 CRIS TCG CPUs
 M: Edgar E. Iglesias <[email protected]>
 S: Maintained
@@ -982,6 +990,28 @@ F: include/hw/*/nrf51*.h
 F: include/hw/*/microbit*.h
 F: tests/qtest/microbit-test.c
 
+AVR Machines
+-------------
+
+AVR MCUs
+M: Michael Rolnik <[email protected]>
+R: Sarah Harris <[email protected]>
+S: Maintained
+F: default-configs/avr-softmmu.mak
+F: hw/avr/
+F: include/hw/char/avr_usart.h
+F: hw/char/avr_usart.c
+F: include/hw/timer/avr_timer16.h
+F: hw/timer/avr_timer16.c
+F: include/hw/misc/avr_power.h
+F: hw/misc/avr_power.c
+
+Arduino
+M: Philippe Mathieu-Daudé <[email protected]>
+R: Sarah Harris <[email protected]>
+S: Maintained
+F: hw/avr/arduino.c
+
 CRIS Machines
 -------------
 Axis Dev88

diff --git a/configure b/configure
@@ -8143,6 +8143,10 @@ case "$target_name" in
     mttcg="yes"
     gdb_xml_files="aarch64-core.xml aarch64-fpu.xml arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml arm-m-profile.xml"
   ;;
+  avr)
+    gdb_xml_files="avr-cpu.xml"
+    target_compiler=$cross_cc_avr
+  ;;
   cris)
   ;;
   hppa)
@@ -8387,6 +8391,9 @@ for i in $ARCH $TARGET_BASE_ARCH ; do
       disas_config "ARM_A64"
     fi
   ;;
+  avr)
+    disas_config "AVR"
+  ;;
   cris)
     disas_config "CRIS"
   ;;

diff --git a/default-configs/avr-softmmu.mak b/default-configs/avr-softmmu.mak
@@ -0,0 +1,5 @@
+# Default configuration for avr-softmmu
+
+# Boards:
+#
+CONFIG_ARDUINO=y
diff --git a/docs/system/target-avr.rst b/docs/system/target-avr.rst
@@ -0,0 +1,37 @@
+.. _AVR-System-emulator:
+
+AVR System emulator
+-------------------
+
+Use the executable ``qemu-system-avr`` to emulate a AVR 8 bit based machine.
+These can have one of the following cores: avr1, avr2, avr25, avr3, avr31,
+avr35, avr4, avr5, avr51, avr6, avrtiny, xmega2, xmega3, xmega4, xmega5,
+xmega6 and xmega7.
+
+As for now it supports few Arduino boards for educational and testing purposes.
+These boards use a ATmega controller, which model is limited to USART & 16-bit
+timer devices, enought to run FreeRTOS based applications (like
+https://github.com/seharris/qemu-avr-tests/blob/master/free-rtos/Demo/AVR_ATMega2560_GCC/demo.elf
+).
+
+Following are examples of possible usages, assuming demo.elf is compiled for
+AVR cpu
+
+ - Continuous non interrupted execution:
+   ``qemu-system-avr -machine mega2560 -bios demo.elf``
+
+ - Continuous non interrupted execution with serial output into telnet window:
+   ``qemu-system-avr -machine mega2560 -bios demo.elf -serial
+   tcp::5678,server,nowait -nographic``
+   and then in another shell
+   ``telnet localhost 5678``
+
+ - Debugging wit GDB debugger:
+   ``qemu-system-avr -machine mega2560 -bios demo.elf -s -S``
+   and then in another shell
+   ``avr-gdb demo.elf``
+   and then within GDB shell
+   ``target remote :1234``
+
+ - Print out executed instructions:
+   ``qemu-system-avr -machine mega2560 -bios demo.elf -d in_asm``
diff --git a/docs/system/targets.rst b/docs/system/targets.rst
@@ -19,3 +19,4 @@ Contents:
    target-xtensa
    target-s390x
    target-rx
+   target-avr
diff --git a/gdb-xml/avr-cpu.xml b/gdb-xml/avr-cpu.xml
@@ -0,0 +1,49 @@
+<?xml version="1.0"?>
+<!-- Copyright (C) 2018-2019 Free Software Foundation, Inc.
+
+     Copying and distribution of this file, with or without modification,
+     are permitted in any medium without royalty provided the copyright
+     notice and this notice are preserved.  -->
+
+<!-- Register numbers are hard-coded in order to maintain backward
+     compatibility with older versions of tools that didn't use xml
+     register descriptions.  -->
+
+<!DOCTYPE feature SYSTEM "gdb-target.dtd">
+<feature name="org.gnu.gdb.riscv.cpu">
+  <reg name="r0" bitsize="8" type="int" regnum="0"/>
+  <reg name="r1" bitsize="8" type="int"/>
+  <reg name="r2" bitsize="8" type="int"/>
+  <reg name="r3" bitsize="8" type="int"/>
+  <reg name="r4" bitsize="8" type="int"/>
+  <reg name="r5" bitsize="8" type="int"/>
+  <reg name="r6" bitsize="8" type="int"/>
+  <reg name="r7" bitsize="8" type="int"/>
+  <reg name="r8" bitsize="8" type="int"/>
+  <reg name="r9" bitsize="8" type="int"/>
+  <reg name="r10" bitsize="8" type="int"/>
+  <reg name="r11" bitsize="8" type="int"/>
+  <reg name="r12" bitsize="8" type="int"/>
+  <reg name="r13" bitsize="8" type="int"/>
+  <reg name="r14" bitsize="8" type="int"/>
+  <reg name="r15" bitsize="8" type="int"/>
+  <reg name="r16" bitsize="8" type="int"/>
+  <reg name="r17" bitsize="8" type="int"/>
+  <reg name="r18" bitsize="8" type="int"/>
+  <reg name="r19" bitsize="8" type="int"/>
+  <reg name="r20" bitsize="8" type="int"/>
+  <reg name="r21" bitsize="8" type="int"/>
+  <reg name="r22" bitsize="8" type="int"/>
+  <reg name="r23" bitsize="8" type="int"/>
+  <reg name="r24" bitsize="8" type="int"/>
+  <reg name="r25" bitsize="8" type="int"/>
+  <reg name="r26" bitsize="8" type="int"/>
+  <reg name="r27" bitsize="8" type="int"/>
+  <reg name="r28" bitsize="8" type="int"/>
+  <reg name="r29" bitsize="8" type="int"/>
+  <reg name="r30" bitsize="8" type="int"/>
+  <reg name="r31" bitsize="8" type="int"/>
+  <reg name="sreg" bitsize="8" type="int"/>
+  <reg name="sp" bitsize="8" type="int"/>
+  <reg name="pc" bitsize="8" type="int"/>
+</feature>
diff --git a/hw/Kconfig b/hw/Kconfig
@@ -43,6 +43,7 @@ source watchdog/Kconfig
 # arch Kconfig
 source arm/Kconfig
 source alpha/Kconfig
+source avr/Kconfig
 source cris/Kconfig
 source hppa/Kconfig
 source i386/Kconfig

diff --git a/hw/avr/Kconfig b/hw/avr/Kconfig
@@ -0,0 +1,9 @@
+config AVR_ATMEGA_MCU
+    bool
+    select AVR_TIMER16
+    select AVR_USART
+    select AVR_POWER
+
+config ARDUINO
+    select AVR_ATMEGA_MCU
+    select UNIMP
diff --git a/hw/avr/Makefile.objs b/hw/avr/Makefile.objs
@@ -0,0 +1,3 @@
+obj-y += boot.o
+obj-$(CONFIG_AVR_ATMEGA_MCU) += atmega.o
+obj-$(CONFIG_ARDUINO) += arduino.o
diff --git a/hw/avr/arduino.c b/hw/avr/arduino.c
@@ -0,0 +1,149 @@
+/*
+ * QEMU Arduino boards
+ *
+ * Copyright (c) 2019-2020 Philippe Mathieu-Daudé
+ *
+ * This work is licensed under the terms of the GNU GPLv2 or later.
+ * See the COPYING file in the top-level directory.
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+/* TODO: Implement the use of EXTRAM */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "hw/boards.h"
+#include "atmega.h"
+#include "boot.h"
+
+typedef struct ArduinoMachineState {
+    /*< private >*/
+    MachineState parent_obj;
+    /*< public >*/
+    AtmegaMcuState mcu;
+} ArduinoMachineState;
+
+typedef struct ArduinoMachineClass {
+    /*< private >*/
+    MachineClass parent_class;
+    /*< public >*/
+    const char *mcu_type;
+    uint64_t xtal_hz;
+} ArduinoMachineClass;
+
+#define TYPE_ARDUINO_MACHINE \
+        MACHINE_TYPE_NAME("arduino")
+#define ARDUINO_MACHINE(obj) \
+        OBJECT_CHECK(ArduinoMachineState, (obj), TYPE_ARDUINO_MACHINE)
+#define ARDUINO_MACHINE_CLASS(klass) \
+        OBJECT_CLASS_CHECK(ArduinoMachineClass, (klass), TYPE_ARDUINO_MACHINE)
+#define ARDUINO_MACHINE_GET_CLASS(obj) \
+        OBJECT_GET_CLASS(ArduinoMachineClass, (obj), TYPE_ARDUINO_MACHINE)
+
+static void arduino_machine_init(MachineState *machine)
+{
+    ArduinoMachineClass *amc = ARDUINO_MACHINE_GET_CLASS(machine);
+    ArduinoMachineState *ams = ARDUINO_MACHINE(machine);
+
+    object_initialize_child(OBJECT(machine), "mcu", &ams->mcu, amc->mcu_type);
+    object_property_set_uint(OBJECT(&ams->mcu), "xtal-frequency-hz",
+                             amc->xtal_hz, &error_abort);
+    sysbus_realize(SYS_BUS_DEVICE(&ams->mcu), &error_abort);
+
+    if (machine->firmware) {
+        if (!avr_load_firmware(&ams->mcu.cpu, machine,
+                               &ams->mcu.flash, machine->firmware)) {
+            exit(1);
+        }
+    }
+}
+
+static void arduino_machine_class_init(ObjectClass *oc, void *data)
+{
+    MachineClass *mc = MACHINE_CLASS(oc);
+
+    mc->init = arduino_machine_init;
+    mc->default_cpus = 1;
+    mc->min_cpus = mc->default_cpus;
+    mc->max_cpus = mc->default_cpus;
+    mc->no_floppy = 1;
+    mc->no_cdrom = 1;
+    mc->no_parallel = 1;
+}
+
+static void arduino_duemilanove_class_init(ObjectClass *oc, void *data)
+{
+    MachineClass *mc = MACHINE_CLASS(oc);
+    ArduinoMachineClass *amc = ARDUINO_MACHINE_CLASS(oc);
+
+    /* https://www.arduino.cc/en/Main/ArduinoBoardDuemilanove */
+    mc->desc        = "Arduino Duemilanove (ATmega168)",
+    mc->alias       = "2009";
+    amc->mcu_type   = TYPE_ATMEGA168_MCU;
+    amc->xtal_hz    = 16 * 1000 * 1000;
+};
+
+static void arduino_uno_class_init(ObjectClass *oc, void *data)
+{
+    MachineClass *mc = MACHINE_CLASS(oc);
+    ArduinoMachineClass *amc = ARDUINO_MACHINE_CLASS(oc);
+
+    /* https://store.arduino.cc/arduino-uno-rev3 */
+    mc->desc        = "Arduino UNO (ATmega328P)";
+    mc->alias       = "uno";
+    amc->mcu_type   = TYPE_ATMEGA328_MCU;
+    amc->xtal_hz    = 16 * 1000 * 1000;
+};
+
+static void arduino_mega_class_init(ObjectClass *oc, void *data)
+{
+    MachineClass *mc = MACHINE_CLASS(oc);
+    ArduinoMachineClass *amc = ARDUINO_MACHINE_CLASS(oc);
+
+    /* https://www.arduino.cc/en/Main/ArduinoBoardMega */
+    mc->desc        = "Arduino Mega (ATmega1280)";
+    mc->alias       = "mega";
+    amc->mcu_type   = TYPE_ATMEGA1280_MCU;
+    amc->xtal_hz    = 16 * 1000 * 1000;
+};
+
+static void arduino_mega2560_class_init(ObjectClass *oc, void *data)
+{
+    MachineClass *mc = MACHINE_CLASS(oc);
+    ArduinoMachineClass *amc = ARDUINO_MACHINE_CLASS(oc);
+
+    /* https://store.arduino.cc/arduino-mega-2560-rev3 */
+    mc->desc        = "Arduino Mega 2560 (ATmega2560)";
+    mc->alias       = "mega2560";
+    amc->mcu_type   = TYPE_ATMEGA2560_MCU;
+    amc->xtal_hz    = 16 * 1000 * 1000; /* CSTCE16M0V53-R0 */
+};
+
+static const TypeInfo arduino_machine_types[] = {
+    {
+        .name          = MACHINE_TYPE_NAME("arduino-duemilanove"),
+        .parent        = TYPE_ARDUINO_MACHINE,
+        .class_init    = arduino_duemilanove_class_init,
+    }, {
+        .name          = MACHINE_TYPE_NAME("arduino-uno"),
+        .parent        = TYPE_ARDUINO_MACHINE,
+        .class_init    = arduino_uno_class_init,
+    }, {
+        .name          = MACHINE_TYPE_NAME("arduino-mega"),
+        .parent        = TYPE_ARDUINO_MACHINE,
+        .class_init    = arduino_mega_class_init,
+    }, {
+        .name          = MACHINE_TYPE_NAME("arduino-mega-2560-v3"),
+        .parent        = TYPE_ARDUINO_MACHINE,
+        .class_init    = arduino_mega2560_class_init,
+    }, {
+        .name           = TYPE_ARDUINO_MACHINE,
+        .parent         = TYPE_MACHINE,
+        .instance_size  = sizeof(ArduinoMachineState),
+        .class_size     = sizeof(ArduinoMachineClass),
+        .class_init     = arduino_machine_class_init,
+        .abstract       = true,
+    }
+};
+
+DEFINE_TYPES(arduino_machine_types)