Merge master v3.1.2 into release

scripts/config.ts

@@ -354,7 +354,7 @@ function writeL2ChainConfig(argv: any) {
             "EnableArbOS": true,
             "AllowDebugPrecompiles": true,
             "DataAvailabilityCommittee": false,
-            "InitialArbOSVersion": 30,
+            "InitialArbOSVersion": 31,
             "InitialChainOwner": argv.l2owner,
             "GenesisBlockNum": 0
         }
@@ -387,7 +387,7 @@ function writeL3ChainConfig(argv: any) {
             "EnableArbOS": true,
             "AllowDebugPrecompiles": true,
             "DataAvailabilityCommittee": false,
-            "InitialArbOSVersion": 30,
+            "InitialArbOSVersion": 31,
             "InitialChainOwner": argv.l2owner,
             "GenesisBlockNum": 0
         }

test-node.bash

@@ -1,9 +1,9 @@
 #!/usr/bin/env bash
 
-set -e
+set -eu
 
-NITRO_NODE_VERSION=offchainlabs/nitro-node:v3.0.1-cf4b74e-dev
-BLOCKSCOUT_VERSION=offchainlabs/blockscout:v1.0.0-c8db5b1
+NITRO_NODE_VERSION=offchainlabs/nitro-node:v3.1.2-309340a-dev
+BLOCKSCOUT_VERSION=offchainlabs/blockscout:v1.1.0-0e716c8
 
 # This commit matches v2.1.0 release of nitro-contracts, with additional support to set arb owner through upgrade executor
 DEFAULT_NITRO_CONTRACTS_VERSION="99c07a7db2fcce75b751c5a2bd4936e898cda065"
@@ -36,23 +36,32 @@ else
 fi
 
 run=true
-force_build=false
 validate=false
 detach=false
 blockscout=false
 tokenbridge=false
 l3node=false
 consensusclient=false
 redundantsequencers=0
-dev_build_nitro=false
-dev_build_blockscout=false
 l3_custom_fee_token=false
 l3_token_bridge=false
 l3_custom_fee_token_decimals=18
 batchposters=1
 devprivkey=b6b15c8cb491557369f3c7d2c287b053eb229daa9c22138887752191c9520659
 l1chainid=1337
 simple=true
+
+# Use the dev versions of nitro/blockscout
+dev_nitro=false
+dev_blockscout=false
+
+# Rebuild docker images
+build_dev_nitro=false
+build_dev_blockscout=false
+build_utils=false
+force_build_utils=false
+build_node_images=false
+
 while [[ $# -gt 0 ]]; do
     case $1 in
         --init)
@@ -61,6 +70,8 @@ while [[ $# -gt 0 ]]; do
                 read -p "are you sure? [y/n]" -n 1 response
                 if [[ $response == "y" ]] || [[ $response == "Y" ]]; then
                     force_init=true
+                    build_utils=true
+                    build_node_images=true
                     echo
                 else
                     exit 0
@@ -70,28 +81,72 @@ while [[ $# -gt 0 ]]; do
             ;;
         --init-force)
             force_init=true
+            build_utils=true
+            build_node_images=true
             shift
             ;;
         --dev)
             simple=false
             shift
             if [[ $# -eq 0 || $1 == -* ]]; then
                 # If no argument after --dev, set both flags to true
-                dev_build_nitro=true
-                dev_build_blockscout=true
+                dev_nitro=true
+                build_dev_nitro=true
+                dev_blockscout=true
+                build_dev_blockscout=true
             else
                 while [[ $# -gt 0 && $1 != -* ]]; do
                     if [[ $1 == "nitro" ]]; then
-                        dev_build_nitro=true
+                        dev_nitro=true
+                        build_dev_nitro=true
                     elif [[ $1 == "blockscout" ]]; then
-                        dev_build_blockscout=true
+                        dev_blockscout=true
+                        build_dev_blockscout=true
                     fi
                     shift
                 done
             fi
             ;;
         --build)
-            force_build=true
+            build_dev_nitro=true
+            build_dev_blockscout=true
+            build_utils=true
+            build_node_images=true
+            shift
+            ;;
+        --no-build)
+            build_dev_nitro=false
+            build_dev_blockscout=false
+            build_utils=false
+            build_node_images=false
+            shift
+            ;;
+        --build-dev-nitro)
+            build_dev_nitro=true
+            shift
+            ;;
+        --no-build-dev-nitro)
+            build_dev_nitro=false
+            shift
+            ;;
+        --build-dev-blockscout)
+            build_dev_blockscout=true
+            shift
+            ;;
+        --no-build-dev-blockscout)
+            build_dev_blockscout=false
+            shift
+            ;;
+        --build-utils)
+            build_utils=true
+            shift
+            ;;
+        --no-build-utils)
+            build_utils=false
+            shift
+            ;;
+        --force-build-utils)
+            force_build_utils=true
             shift
             ;;
         --validate)
@@ -191,6 +246,7 @@ while [[ $# -gt 0 ]]; do
             echo
             echo OPTIONS:
             echo --build           rebuild docker images
+            echo --no-build        don\'t rebuild docker images
             echo --dev             build nitro and blockscout dockers from source instead of pulling them. Disables simple mode
             echo --init            remove all data, rebuild, deploy new rollup
             echo --pos             l1 is a proof-of-stake chain \(using prysm for consensus\)
@@ -208,28 +264,19 @@ while [[ $# -gt 0 ]]; do
             echo --no-tokenbridge  don\'t build or launch tokenbridge
             echo --no-run          does not launch nodes \(useful with build or init\)
             echo --no-simple       run a full configuration with separate sequencer/batch-poster/validator/relayer
+            echo --build-dev-nitro     rebuild dev nitro docker image
+            echo --no-build-dev-nitro  don\'t rebuild dev nitro docker image
+            echo --build-dev-blockscout     rebuild dev blockscout docker image
+            echo --no-build-dev-blockscout  don\'t rebuild dev blockscout docker image
+            echo --build-utils         rebuild scripts, rollupcreator, token bridge docker images
+            echo --no-build-utils      don\'t rebuild scripts, rollupcreator, token bridge docker images
+            echo --force-build-utils   force rebuilding utils, useful if NITRO_CONTRACTS_ or TOKEN_BRIDGE_BRANCH changes
             echo
             echo script runs inside a separate docker. For SCRIPT-ARGS, run $0 script --help
             exit 0
     esac
 done
 
-if $force_init; then
-  force_build=true
-fi
-
-if $dev_build_nitro; then
-  if [[ "$(docker images -q nitro-node-dev:latest 2> /dev/null)" == "" ]]; then
-    force_build=true
-  fi
-fi
-
-if $dev_build_blockscout; then
-  if [[ "$(docker images -q blockscout:latest 2> /dev/null)" == "" ]]; then
-    force_build=true
-  fi
-fi
-
 NODES="sequencer"
 INITIAL_SEQ_NODES="sequencer"
 
@@ -269,51 +316,56 @@ fi
 if $blockscout; then
     NODES="$NODES blockscout"
 fi
-if $force_build; then
-  echo == Building..
-  if $dev_build_nitro; then
-    if ! [ -n "${NITRO_SRC+set}" ]; then
-        NITRO_SRC=`dirname $PWD`
-    fi
-    if ! grep ^FROM "${NITRO_SRC}/Dockerfile" | grep nitro-node 2>&1 > /dev/null; then
-        echo nitro source not found in "$NITRO_SRC"
-        echo execute from a sub-directory of nitro or use NITRO_SRC environment variable
-        exit 1
-    fi
-    docker build "$NITRO_SRC" -t nitro-node-dev --target nitro-node-dev
+
+
+if $dev_nitro && $build_dev_nitro; then
+  echo == Building Nitro
+  if ! [ -n "${NITRO_SRC+set}" ]; then
+      NITRO_SRC=`dirname $PWD`
   fi
-  if $dev_build_blockscout; then
-    if $blockscout; then
-      docker build blockscout -t blockscout -f blockscout/docker/Dockerfile
-    fi
+  if ! grep ^FROM "${NITRO_SRC}/Dockerfile" | grep nitro-node 2>&1 > /dev/null; then
+      echo nitro source not found in "$NITRO_SRC"
+      echo execute from a sub-directory of nitro or use NITRO_SRC environment variable
+      exit 1
   fi
+  docker build "$NITRO_SRC" -t nitro-node-dev --target nitro-node-dev
+fi
+if $dev_blockscout && $build_dev_blockscout; then
+  if $blockscout; then
+    echo == Building Blockscout
+    docker build blockscout -t blockscout -f blockscout/docker/Dockerfile
+  fi
+fi
 
+if $build_utils; then
   LOCAL_BUILD_NODES="scripts rollupcreator"
   if $tokenbridge || $l3_token_bridge; then
     LOCAL_BUILD_NODES="$LOCAL_BUILD_NODES tokenbridge"
   fi
-  docker compose build --no-rm $LOCAL_BUILD_NODES
+  UTILS_NOCACHE=""
+  if $force_build_utils; then
+      UTILS_NOCACHE="--no-cache"
+  fi
+  docker compose build --no-rm $UTILS_NOCACHE $LOCAL_BUILD_NODES
 fi
 
-if $dev_build_nitro; then
+if $dev_nitro; then
   docker tag nitro-node-dev:latest nitro-node-dev-testnode
 else
   docker pull $NITRO_NODE_VERSION
   docker tag $NITRO_NODE_VERSION nitro-node-dev-testnode
 fi
 
-if $dev_build_blockscout; then
-  if $blockscout; then
+if $blockscout; then
+  if $dev_blockscout; then
     docker tag blockscout:latest blockscout-testnode
-  fi
-else
-  if $blockscout; then
+  else
     docker pull $BLOCKSCOUT_VERSION
     docker tag $BLOCKSCOUT_VERSION blockscout-testnode
   fi
 fi
 
-if $force_build; then
+if $build_node_images; then
     docker compose build --no-rm $NODES scripts
 fi
 
@@ -436,6 +488,7 @@ if $force_init; then
         echo l3owneraddress $l3owneraddress
         docker compose run scripts --l2owner $l3owneraddress  write-l3-chain-config
 
+        EXTRA_L3_DEPLOY_FLAG=""
         if $l3_custom_fee_token; then
             echo == Deploying custom fee token
             nativeTokenAddress=`docker compose run scripts create-erc20 --deployer user_fee_token_deployer --bridgeable $tokenbridge --decimals $l3_custom_fee_token_decimals | tail -n 1 | awk '{ print $NF }'`