Merge branch 'main' of https://github.com/RBinsonB/sharkhead-tx2-case …

…into main

README.md

@@ -5,7 +5,7 @@ A 3D-printed portable case for the Nvidia Jetson TX2 on a [Connect Tech Orbitty
 <img src="/documentation/pictures/render_2.png" align="center" width="600"/>
 
 
-It is the ideal case for use as a onboard computer on a robot or UAV (rapid unscheduled dissassembly on impact feature included). Free to use for academic and personnal (non-profit) use. Commercial use is not permitted without consent.
+It is the ideal case for use as a onboard computer on a robot or UAV (careful: rapid unscheduled dissassembly on impact feature included). Free to use for academic and personnal (non-profit) use. Commercial use is not permitted without consent.
 
 <a href="/documentation/pictures/4wd_holonomic_robot.png"><img src="/documentation/pictures/4wd_holonomic_robot.png" align="center" height="306" width="355"></a>
 <img src="/documentation/pictures/foxtech_uav.png" align="center" height="306" width="421"/>
@@ -36,13 +36,13 @@ On the right side the RECOVERY, RESET and POWER buttons can be accessed, as well
 #### GPIO
 The GPIO are forwarded to the female header on the side of the case.
 
-<img src="/documentation/pictures/gipo_details.png" width="700">
+<img src="/documentation/pictures/gpio_details.png" width="450">
 
 ## Assembly instructions
 ### Necessary parts
 The following parts are required to assemble the case.
 
-ADD PICTURE ALL PARTS ON DESK
+<img src="/documentation/pictures/assembly/assembly_all.png" width="700">
 
 #### Printed part
 * [(1x) lower case part (PLA)](/STL/casing_lower_part.STL)