Project SEIC

Overview

This project contains two Arduino sketches: Project_SEIC_1.ino and Project_SEIC_2.ino.

Project_SEIC_1.ino

• Functionality:
  • Reads gas levels using an MQ2 sensor.
  • Monitors distance using an ultrasonic sensor (HCSR04).
  • Blinks an LED and sounds a buzzer based on gas detection and distance measurements.
  • Uses Blynk for remote monitoring and control.

Project_SEIC_2.ino

• Functionality:
  • Reads temperature and humidity using a DHT11 sensor.
  • Reads luminosity using an LS06S sensor.
  • Controls LEDs and a buzzer based on sensor readings.
  • Determines environmental conditions and provides feedback through LEDs and buzzer.

Files

1. Project_SEIC_1.ino: Monitors gas levels and distance, and provides alerts via LEDs and buzzer.
2. Project_SEIC_2.ino: Monitors temperature, humidity, and luminosity, and provides alerts via LEDs and buzzer.

Setup

1. Project_SEIC_1.ino:

   • Connect MQ2 sensor to pin 15.
   • Connect HCSR04 ultrasonic sensor to pins 4 (Trigger) and 5 (Echo).
   • Connect LED to pin 21.
   • Connect second LED to pin 12.
   • Connect buzzer to pin 23.

2. Project_SEIC_2.ino:

   • Connect DHT11 sensor to pin 22.
   • Connect LS06S sensor to pin 21.
   • Connect LED to pin 18.
   • Connect second LED to pin 19.
   • Connect buzzer to pin 12.