Server which streams images (JPEG) from a WebCam (USB camera or Raspberry Pi Camera Module) via a WebSocket. Also includes a simple JavaScript client to show the video in a Web Browser.
I've implemented this for streaming live images of my Aquarium from a Raspberry Pi 3 to my smartphone (or tablet or PC) when I'm on vacation to check on my fish 🐠. For this I want to see high resolution images (e.g. the full 1920x1080 pixels the Raspberry Pi Camera can provide), even if the connection speed is slow. It is fine to see only a few images per second, if I'm on a slow network, but if it is fast I want to see a more smooth video.
For my use case this implementation has several advantages over other existing Web video streaming solutions:
- Supports high resolution images (video) even if the connection speed is slow by automatically adapting the framerate.
- A simple pull approach ensures this adaptive framerate: The client will ask the server only for a new image once it has fully loaded the previous one. That way the images will never lag behind for a longer time or appear corrupted. (In comparison to fixed framerate/bandwith Motion JPEG (MJPEG) solutions like motion / motioneye, MJPEG-streamer and also MPEG1 solutions like JSMPEG / pistreaming.)
- Works on all modern Browsers (including Mobile) that support WebSockets.
- Easier to set up and configure and better supported by Web browsers (at the time of this writing) than more advanced adaptive video streaming methods like HLS, MPEG-DASH, WebRTC.
- Works with the Raspberry Pi Camera Module and with almost any USB camera (supported by Linux / pygame). (In comparison to the otherwise very nice RPi-Cam-Web-Interface, which unfortunately only works with the Raspberry Pi Camera.)
- Automatically turns off the camera if no client is connected. (To safe energy, camera lifetime and CPU usage. And then you also know that someone watches if you are at home and the camera LED suddenly turns on. 😉)
- Doesn't write images / video to disk (to not shorten the lifetime of the SD card) but encodes and sends them in memory.
- Sends the data efficiently in binary format and not Base64 encoded (in comparison to the otherwise very similar hello-websocket).
- Fully open source. (In comparison to UV4L, which seems to be closed-source. 😱)
Disadvantages:
- For higher resolutions it will never achieve a high framerate, because it's not using an efficient Video codec (like H.264).
- Doesn't work well with many clients connecting simultanously, because it will capture new images and send them to each client separately (i.e. the framerate will become slower). This isn't a problem for my use case as I and my girlfriend will be the only ones connecting to our aquarium video.
The commands below assume you are using Rasbian Jessie on a Raspberry Pi. Installation of dependencies might be slightly different on other Linux distributions. For that please refer to the installation instructions of each of these packages. This project has not yet been tested on other operating systems, like Windows, but should probably work there too.
sudo apt install python3
PIP for installing Python packages:
sudo apt install python3-pip
sudo pip3 install tornado
Python Imaging Library (or the Pillow fork)
sudo apt install python3-pil
Pygame (used for capturing images from a Webcam)
sudo apt install python3-pygame
git (to clone this repository)
sudo apt install git
The Webcam has to be compatible with Video4Linux2 and should appear as /dev/video0 in the filesystem. Most USB Webcams support the UVC standard and should work just fine. The Raspberry Pi Camera Module can be made available as a V4L2 device by loading a kernel module:
sudo modprobe bcm2835-v4l2
To permanently load this module (so that it also works after a reboot) add the line bcm2835-v4l2 to /etc/modules.
Clone the repository to some directory and change to that directory:
git clone https://github.com/Bronkoknorb/PyImageStream.git
cd PyImageStream
Start with
python3 main.py
The stream can then be watched on: http://YOUR_HOST:8888/ (where YOUR_HOST is your host name or IP address or localhost on the same machine).
main.py can be started with a number of optional arguments:
usage: main.py [-h] [--port PORT] [--camera CAMERA] [--width WIDTH]
[--height HEIGHT] [--quality QUALITY] [--stopdelay STOPDELAY]
Start the PyImageStream server.
optional arguments:
-h, --help show this help message and exit
--port PORT Web server port (default: 8888)
--camera CAMERA Camera index, first camera is 0 (default: 0)
--width WIDTH Width (default: 640)
--height HEIGHT Height (default: 480)
--quality QUALITY JPEG Quality 1 (worst) to 100 (best) (default: 70)
--stopdelay STOPDELAY
Delay in seconds before the camera will be stopped
after all clients have disconnected (default: 7)
If you have multiple cameras connected, then simply start multiple instances of this server on different ports.
In the file static/client.js you can configure the maximum framerate that the client will try to load
and display (default: 24 frames per second).
To automatically start the server when your machine is rebooted, execute:
crontab -e
... and then add the following line to the crontab:
@reboot sleep 5 && /home/pi/software/PyImageStream/start.sh
Replace the path of the script with the location where you installed it. You can also add any of the optional arguments to the line.
When starting the server using the start.sh command it will write to a server.log file. To avoid that this log file grows infinite create the following logrotate rule as /etc/logrotate.d/PyImageStream:
/home/pi/software/PyImageStream/server.log {
weekly
rotate 4
compress
missingok
copytruncate
}
Replace the path of the logfile with the location where you installed it.
To enable encryption (HTTPS) and password authentication you can setup another Web server (like nginx) as a reverse proxy before this server.
This is the relevant part from a nginx configuration file that I use to proxy my PyImageStream:
location ^~ /cam1/websocket {
proxy_pass http://10.0.0.16:8888/websocket;
proxy_http_version 1.1;
proxy_set_header Upgrade $http_upgrade;
proxy_set_header Connection "upgrade";
}
location ~ ^/cam1/(.*)$ {
proxy_pass http://10.0.0.16:8888/$1;
include /etc/nginx/proxy_params;
}
It will make the camera available under http://YOUR_HOST/cam1/
To setup authentication and HTTPS please refer to the nginx documentation. If you have a domain name or are using a Dynamic DNS service, then you can get free HTTPS certificates from letsencrypt.
Alternatively you could also configure authentication and HTTPS for the internally used Python Tornado Web server. I haven't tried that yet, but the Tornado Web server documentation should help with that.
If you are using this project, I'd be happy to hear! Please Star the repository (button in the top right) or drop me a mail ([email protected])!
If you have problems or questions then please open an Issue on github.
Feel free to fork the repository and create pull requests for improvements and new features.
See LICENSE.
Hermann Czedik-Eysenberg
[email protected]