This is a discord bot for the ACM chapter at SJSU. Eventually, it will link to the ACM door monitor and give notifications on the current room availability.
This project uses a Cog and Extension setup. The purpose of using Cogs and
Extensions is to group related commands with each other and allow easy loading/reloading
of commands without having to restart the bot (sending -reload (cog) will reload the specified cog).
To add a cog, add a file in the directory cogs. The file should contain a class that
inherits from commands.Cog and a function setup that adds that cog to the Bot.
For the Raspberry Pi to be wired up correctly with the door sensors, the long wire
from the door sensor must be wired up to GPIO 16. The short wire from the door sensor must
be wired up to GND.
What this looks like in practice:
- door sensor's short wire → female to female connector → black extender wire → female to female connector →
the
GNDpin on the Raspberry Pi (the 4th pin from the bottom on the right) - door sensor's long wire → female to female connector → red extender wire → female to female connector →
the
GPIO 16pin on the Raspberry Pi (the 3rd pin from the bottom on the right)
