This release page is deprecated and will no longer be used

All new releases will be published here: https://nfeteam.org/forum/forums/nfe-tools-releases/

NFE Tools v7.1.1

ArcticFox Configuration

• Minimum required ArcticFox build is now 170603;
• Improved opening saved configurations;
• Some UI/UX improvements;
• Many localization updates;

Profiles

• Added possibility to edit saved resistance in the VW profiles;

Screen

• Added "Logo" tab with create/preview/upload functionality;
• Added "Idle Time (Charging)" option;

Controls

• Added "Temperature 1 °C / 2 °F step" option;

Multi Clicks / Shortcut Actions

• Added "Re-Read Resistance" (with udpdating profile) – allows to re-read coil without unscrewing atomizer;
• Added "Re-Detect Atomizer" – force Smart profile switch;

Advanced

• Added "Power Limit" option which can set up global power limit of your device;
• Added "Internal Resistance" setup;
• Added "Deep Sleep Delay" setup;

Screenshooter

• Active Zoom feature which will change window size when you are changing "Pixel Size Multiplier"';
• Automatic screen size detection;
• New design;

Firmware Updater

• New design;

7.0

NToolbox v2.0

ArcticFox Configuration

• Minimum required ArcticFox build is now 170508;
• Many UI/UX improvements;

Profiles

• Preheat Delay can be set up to 180s;
• Preheat Delay now works with Preheat Curves;

Smart

• Added ability to choose "Smart Mode": "On", "Lazy" and "Off";
• Added ability to setup "Smart Range" from 1% to 15%;

Screen

• Added Idle Time (Locked) (screen fading delay when device in the locked state);
• Added Logo Delay (Delay before logo appear if it is enabled);
• Added Clock Delay (Delay before clock appear if it is enabled);
• Added Charge Screen Extra selector (Allows to select what kind of the extra info will be on the charge screen);
• Added ability to select new skin "Foxy" for a large screen devices;
• Added ability to set up information lines for "Foxy" skin.

Stealth

• Added ability to display the charging screen when the stealth mode is on;
• Added ability to display screensaver when the stealth mode is on;

Multi Clicks

• Rearranged multi clicks dropdown;
• Added "Resistance Lock / Unlock" action;
• Added "Reset Counters" action;
• Added "Power Bank" action;
• Added "Device Lock / Unlock" action;
• Added 5 clicks actions: "Device Lock / Unlock" and "Device On / Off";

Shortcuts

• Added ability to setup shortcuts for VW and TC modes;
• Available shortcuts are: "Fire –", "Fire +" and "+ –";
• Shortcuts can be setuped in the 4th devcie states:
  • In Standby;
  • In Menu;
  • When Editing Info Lines;
  • When Selecting Profile;

Advanced

• Removed all battery presets;
• Added ability to create up to 3 battery discharge profiles;
• Added ability to choose clock driver: "LXT (formerly known as x32)", "LIRC" and "LSL";
• Added ability to choose "Deep Sleep Behavior":
  • "Just Sleep" - default behavior, after 3 min of inactivity the device simply falls asleep;
  • "Lock Device" - after 3 min of inactivity the device will be locked, and then fall asleep.
  • "Turn Off Device" - after 3 min of inactivity the device will be turned, and then fall asleep.

Localizations

• Updated localizations (Now each supported language have own flag icon);
• Many localization values were changed, some of them were saved but at this point completed localizations are "English" and "Russian";
• Support for these languages is not complete: CZ, DE, ES, FR, HU, IT, NL, PL, SR, UA;

Firmware Updater

• Added support for Joyetech eVic Primo;
• Added support for Joyetech eVic Primo 2.0;
• Added support for Joyetech eVic Primo Mini;
• Added support for Eleaf iStick Pico RDTA;
• Added support for Wismec Predator;
• Added support for Vapor Shark SwitchBox RX;

6.5

NFE Toolbox v1.5

ArcticFox Configuration

• Minimum required ArcticFox build is now 170201;
• Added TFR/Power curves sparkline charts;
• Added separate multi-clicks editors for VW and TC modes;
• Added +/- buttons swap option;
• Added mouse support in the Discharge Curve Editor;
• Added BVO's for 4th batteries devices;
• Added localization possibilities;
• Thanks community for translations. This release contains these localizations:
  • English;
  • Russian;
  • German;
  • Polish;
  • Czech;
  • Hungarian;
  • French;
  • Serbian;
• Screen layout tab automatic selection depending on connected device screen size and selected skin;
• Configuration file from this moment are version independent;
• Improved High DPI support;

Device Monitor

• Added support for 4th batteries devices;

Screenshooter

• Added memorization of the selected screen size;
• Added memorization of the selected pixel size multiplier;

General

• Esc key should close every toolbox windows, main window will be hidden to the system tray;
• Firmware Updater multiple instance protection. Only one instance of the firmware updater can be opened simultaneously, either NFirmwareEditor - Firmware Updater or Toolbox - Firmware Updater;

6.4

NFE Toolbox v1.4

ArcticFox Configuration

• Minimum required ArcticFox build is now 170103;
• Added ability to disable profiles;
• Added Temperature Control extended configuration (PI-Regulator);

• Added "Main Screen Skin" selector. Applicable only for devices with big screens, like eVic, RX2/3 and so on;
• Added "Puffs Time Format" selector;
• Added CheckTCR and USB No Sleep flags;
• Improved "Hide to tray" behavior;
• Added "About & Links";

NFirmwareEditor 6.4

• Some improvements;

6.3

NFE Toolbox v1.3

ArcticFox Configuration

• Minimum required ArcticFox build is now 161223;
• Added "Battery %" line type in the small screen layout editor;
• Added "Info Screen" in the multi clicks editor;
• Fixed BVO's editor when creating configuration from scratch;

NFirmwareEditor 6.3

• Fixed ResourcePack preview;

6.2

NFE Toolbox v1.2

ArcticFox Configuration

• Minimum required ArcticFox build is now 161219;
• Added configuration management (create new, save to file / read from file);
• Added layout editor for classic skin, circle skin and for small screens;
• Added Puff Screen Delay option (how long puff time and other information will stay on screen after puff end);
• Added BVO (Battery Voltage Offset) editor;
• Slightly redesigned preheat type selector;

Screenshooter

• Added support for 96x16 screen devices like iStick Pico, RX200, e.g;
• Added screen size selector;

6.1

NFE Toolbox v1.1

General

• Close window button now hides Toolbox window to the system tray if application was started with /minimized arg (same arg is set up automatically when checking "Run NFE Toolbox when Windows starts";

ArcticFox Configuration

• Minimum required ArcticFox build is now 161209;
• Power Curves Editor with zoom, scroll and mouse support;
• Welcome screen was updated;
• Added "Last Puff Time", "Last Power" and "Last Temperature" in the layout editor;
• Added puff cut-off configuration (Advanced -> Settings) from 1 to 15 sec;
• Added multi-click action: Smart On / Off;
• Updated profile editor;
• Fixed maximum preheat delay issue;
• Improved startup time;

Device Monitor

• Fixed some communication issues;
• Improved annotation placement;
• Overall improvements;

Firmware Updater

Improved stability for some OS with USB drivers issues;

6.0

Big release ^^

All tools is now located in the new app - NFE Toolbox

myEvic Configuration is not available in this release

ArcticFox is our new firmware, and ArcicFox Configuration is a tool to configure this firmware with a lot a cool feature.

The New Device Monitor

No more COM hell, just HID! And at this moment no myEvic support. If you want Device Monitor working with myEvic - use previos release.

And many more.
About all stuff you can read at our forum thread: http://www.ecigtalk.ru/forum/f16/t101098.html (RU)

5.1

Configuration Utility

• Tab: Developer -> Tools
  • Screen broadcasting to PC in the real time;
  • Reboot device button;

• New Tab: Developer -> Expert;
  • Shunt correction possibility;
  • Battery discharge profile selection;
  • Custom battery discharge profile creator with graphical view;

Device Monitor

Completely new feature for my Evic NFE Edition firmware. This tool shows you information from the device sensors, builds chart and even can press fire button remotely ^^