Initial commit for Cors System Organisation

vendor/corssystem/cortu-gen-2.yaml

@@ -0,0 +1,192 @@
+name: CorTU Genesis 2 # Device name can not contain the vendor name
+description: Remote Data Acquisition Board with Support for LoRaWAN and RF
+
+# Hardware versions (optional, use when you have revisions)
+hardwareVersions:
+  - version: '1.0'
+    numeric: 1
+  - version: '1.0-rev-A'
+    numeric: 2
+
+# Firmware versions (at least one is mandatory)
+firmwareVersions:
+  - # Firmware version
+    version: '1.0'
+    numeric: 1
+    # Corresponding hardware versions (optional)
+    hardwareVersions:
+      - '1.0'
+
+    # Firmware features (optional)
+    # Valid values are: remote rejoin (trigger a join from the application layer), transmission interval (configure how
+    # often he device sends a message).
+    features:
+      - remote rejoin
+      - transmission interval
+
+    # LoRaWAN Device Profiles per region
+    # Supported regions are EU863-870, US902-928, AU915-928, AS923, CN779-787, EU433, CN470-510, KR920-923, IN865-867,
+    # RU864-870
+    profiles:
+      EU863-870:
+        # Optional identifier of the vendor of the profile. When you specify the vendorID, the profile is loaded from
+        # the vendorID's folder. This allows you to reuse profiles from module or LoRaWAN end device stack vendors.
+        # If vendorID is empty, the current vendor ID is used. In this example, the vendorID is the current vendor ID,
+        # which is verbose.
+        # vendorID: example
+        # Identifier of the profile (lowercase, alphanumeric with dashes, max 36 characters)
+        id: cortugenesis-profile
+        # lorawanCertified: true
+        codec: cortugenesis-codec
+      US902-928:
+        id: cortugenesis-profile
+        # lorawanCertified: true
+        codec: cortugenesis-codec
+
+  # - # You can add more firmware versions and use different profiles per version
+  # version: '2.0'
+  # numeric: 2
+  # hardwareVersions:
+  #   - '1.0-rev-A'
+  # profiles:
+  #   EU863-870:
+  #     id: windsensor-profile
+  #     codec: windsensor-codec
+  # US902-928:
+  #   id: windsensor-profile
+  #   lorawanCertified: true
+  #   codec: windsensor-codec
+  # AS923:
+  #   id: windsensor-profile
+  #   codec: windsensor-codec
+
+# Type of device (optional)
+# Valid values are: devkit, module, cots
+deviceType: cots
+
+# Sensors that this device features (optional)
+# Valid values are:
+# 4-20 ma, accelerometer, altitude, analog input, auxiliary, barometer, battery, button, bvoc, co, co2, conductivity, current, digital input,
+# digital output, dissolved oxygen, distance, dust, energy, gps, gyroscope, h2s, hall effect, humidity, iaq, infrared, leaf wetness, level,
+# light, lightning, link, magnetometer, moisture, motion, nfc, no, no2, o3, occupancy, optical meter, particulate matter, ph, pir,
+# pm2.5, pm10, potentiometer, power, precipitation, pressure, proximity, pulse count, pulse frequency, radar, rainfall, reed switch, rssi,
+# sap flow, smart valve, smoke, snr, so2, solar radiation, sound, strain, surface temperature, switch, temperature, tilt, time, turbidity,
+# tvoc, uv, vapor pressure, velocity, vibration, voltage, water potential, water, weight, wifi ssid, wind direction, wind speed.
+sensors:
+  - 4-20 ma
+  - analog input
+  - digital input
+
+# Additional radios that this device has (optional)
+# Valid values are: ble, nfc, wifi, cellular.
+# additionalRadios:
+#   - ble
+#   - cellular
+
+# Bridge interfaces (optional)
+# Valid values are: modbus, m-bus, can bus, rs-485, sdi-12, analog, ethernet.
+bridgeInterfaces:
+  - modbus
+  - rs-485
+  - analog
+
+# Dimensions in mm (optional)
+# Use width, height, length and/or diameter
+dimensions:
+  width: 110
+  length: 110
+  height: 40
+
+# Weight in grams (optional)
+weight: 350
+
+# Battery information (optional)
+# battery:
+#   replaceable: true
+#   type: AA
+
+# Operating conditions (optional)
+operatingConditions:
+  # Temperature (Celsius)
+  temperature:
+    min: -30
+    max: 85
+  # Relative humidity (fraction of 1)
+  relativeHumidity:
+    min: 0
+    max: 0.97
+
+# IP rating (optional)
+# ipCode: IP64
+
+# Key provisioning (optional)
+# Valid values are: custom (user can configure keys), join server and manifest.
+keyProvisioning:
+  - custom
+  - join server
+
+# Key programming (optional)
+# Valid values are: bluetooth, nfc, wifi, ethernet (via a webpage), serial (when the user has a serial interface to set the keys)
+# and firmware (when the user should change the firmware to set the keys).
+keyProgramming:
+  - serial
+  - firmware
+
+# Key security (optional)
+# Valid values are: none, read protected and secure element.
+keySecurity: none
+
+# Firmware programming (optional)
+# Valid values are: serial (when the user has a serial interface to update the firmware), ethernet, fuota lorawan (when the device
+# supports LoRaWAN FUOTA via standard interfaces) and fuota other (other wireless update mechanism).
+firmwareProgramming:
+  - serial
+  # - fuota lorawan
+
+# Product and data sheet URLs (optional)
+productURL: https://corssystem.com/products/cortu-v1-0/
+# dataSheetURL: https://example.org/wind-sensor/datasheet.pdf
+# Link to simple, easy onboarding instructions for the device (optional).
+# Please do not use this for marketing or overly technical documents like a data sheet.
+# onboardingGuideURL: https://www.thethingsindustries.com/docs/devices/models/windsensor
+
+# Commercial information
+# resellerURLs:
+#   - name: 'Reseller 1'
+#     region: # valid regions are: Argentina, Australia, Brazil, Canada, China, European Union, India, Indonesia.
+#       # Japan, Mexico, Russia, Saudi Arabia, South Africa, South Korea, Turkey, United States, Other
+#       - European Union
+#     url: https://example.org/reseller1
+#   - name: 'Reseller 2'
+#     region:
+#       - United States
+#       - Canada
+#     url: https://example.org/reseller2
+# msrp:
+#   EUR: 90
+#   USD: 120
+
+# Photos
+photos:
+  main: cortugenesis.png # Image needs to have a transparent background
+  # other:
+  #   - windsensor-package.png # Image needs to have a transparent background
+# Youtube or Vimeo Video (optional)
+# videos:
+#   main: https://www.youtube.com/watch?v=JHzxcD2oEn8
+
+# Regulatory compliances (optional)
+# compliances:
+#   safety:
+#     - body: IEC
+#       norm: EN
+#       standard: 62368-1
+#   radioEquipment:
+#     - body: ETSI
+#       norm: EN
+#       standard: 301 489-1
+#       version: 2.2.0
+#     - body: ETSI
+#       norm: EN
+#       standard: 301 489-3
+#       version: 2.1.0

vendor/corssystem/cortu-gen-3.yaml

@@ -0,0 +1,192 @@
+name: Wind Sensor # Device name can not contain the vendor name
+description: Wind Sensor with controllable LED
+
+# Hardware versions (optional, use when you have revisions)
+hardwareVersions:
+  - version: '1.0'
+    numeric: 1
+  - version: '1.0-rev-A'
+    numeric: 2
+
+# Firmware versions (at least one is mandatory)
+firmwareVersions:
+  - # Firmware version
+    version: '1.0'
+    numeric: 1
+    # Corresponding hardware versions (optional)
+    hardwareVersions:
+      - '1.0'
+
+    # Firmware features (optional)
+    # Valid values are: remote rejoin (trigger a join from the application layer), transmission interval (configure how
+    # often he device sends a message).
+    features:
+      - remote rejoin
+      - transmission interval
+
+    # LoRaWAN Device Profiles per region
+    # Supported regions are EU863-870, US902-928, AU915-928, AS923, CN779-787, EU433, CN470-510, KR920-923, IN865-867,
+    # RU864-870
+    profiles:
+      EU863-870:
+        # Optional identifier of the vendor of the profile. When you specify the vendorID, the profile is loaded from
+        # the vendorID's folder. This allows you to reuse profiles from module or LoRaWAN end device stack vendors.
+        # If vendorID is empty, the current vendor ID is used. In this example, the vendorID is the current vendor ID,
+        # which is verbose.
+        # vendorID: example
+        # Identifier of the profile (lowercase, alphanumeric with dashes, max 36 characters)
+        id: windsensor-profile
+        lorawanCertified: true
+        codec: windsensor-codec
+      US902-928:
+        id: windsensor-profile
+        lorawanCertified: true
+        codec: windsensor-codec
+
+  - # You can add more firmware versions and use different profiles per version
+    version: '2.0'
+    numeric: 2
+    hardwareVersions:
+      - '1.0-rev-A'
+    profiles:
+      EU863-870:
+        id: windsensor-profile
+        lorawanCertified: true
+        codec: windsensor-codec
+      US902-928:
+        id: windsensor-profile
+        lorawanCertified: true
+        codec: windsensor-codec
+      AS923:
+        id: windsensor-profile
+        codec: windsensor-codec
+
+# Type of device (optional)
+# Valid values are: devkit, module, cots
+deviceType: cots
+
+# Sensors that this device features (optional)
+# Valid values are:
+# 4-20 ma, accelerometer, altitude, analog input, auxiliary, barometer, battery, button, bvoc, co, co2, conductivity, current, digital input,
+# digital output, dissolved oxygen, distance, dust, energy, gps, gyroscope, h2s, hall effect, humidity, iaq, infrared, leaf wetness, level,
+# light, lightning, link, magnetometer, moisture, motion, nfc, no, no2, o3, occupancy, optical meter, particulate matter, ph, pir,
+# pm2.5, pm10, potentiometer, power, precipitation, pressure, proximity, pulse count, pulse frequency, radar, rainfall, reed switch, rssi,
+# sap flow, smart valve, smoke, snr, so2, solar radiation, sound, strain, surface temperature, switch, temperature, tilt, time, turbidity,
+# tvoc, uv, vapor pressure, velocity, vibration, voltage, water potential, water, weight, wifi ssid, wind direction, wind speed.
+sensors:
+  - wind direction
+  - wind speed
+
+# Additional radios that this device has (optional)
+# Valid values are: ble, nfc, wifi, cellular.
+# additionalRadios:
+#   - ble
+#   - cellular
+
+# Bridge interfaces (optional)
+# Valid values are: modbus, m-bus, can bus, rs-485, sdi-12, analog, ethernet.
+bridgeInterfaces:
+  - m-bus
+  - rs-485
+
+# Dimensions in mm (optional)
+# Use width, height, length and/or diameter
+dimensions:
+  width: 34
+  length: 26
+  height: 77
+
+# Weight in grams (optional)
+weight: 350
+
+# Battery information (optional)
+battery:
+  replaceable: true
+  type: AA
+
+# Operating conditions (optional)
+operatingConditions:
+  # Temperature (Celsius)
+  temperature:
+    min: -30
+    max: 85
+  # Relative humidity (fraction of 1)
+  relativeHumidity:
+    min: 0
+    max: 0.97
+
+# IP rating (optional)
+ipCode: IP64
+
+# Key provisioning (optional)
+# Valid values are: custom (user can configure keys), join server and manifest.
+keyProvisioning:
+  - custom
+  - join server
+
+# Key programming (optional)
+# Valid values are: bluetooth, nfc, wifi, ethernet (via a webpage), serial (when the user has a serial interface to set the keys)
+# and firmware (when the user should change the firmware to set the keys).
+keyProgramming:
+  - serial
+  - firmware
+
+# Key security (optional)
+# Valid values are: none, read protected and secure element.
+keySecurity: none
+
+# Firmware programming (optional)
+# Valid values are: serial (when the user has a serial interface to update the firmware), ethernet, fuota lorawan (when the device
+# supports LoRaWAN FUOTA via standard interfaces) and fuota other (other wireless update mechanism).
+firmwareProgramming:
+  - serial
+  - fuota lorawan
+
+# Product and data sheet URLs (optional)
+productURL: https://example.org/wind-sensor
+dataSheetURL: https://example.org/wind-sensor/datasheet.pdf
+# Link to simple, easy onboarding instructions for the device (optional).
+# Please do not use this for marketing or overly technical documents like a data sheet.
+onboardingGuideURL: https://www.thethingsindustries.com/docs/devices/models/windsensor
+
+# Commercial information
+resellerURLs:
+  - name: 'Reseller 1'
+    region: # valid regions are: Argentina, Australia, Brazil, Canada, China, European Union, India, Indonesia.
+      # Japan, Mexico, Russia, Saudi Arabia, South Africa, South Korea, Turkey, United States, Other
+      - European Union
+    url: https://example.org/reseller1
+  - name: 'Reseller 2'
+    region:
+      - United States
+      - Canada
+    url: https://example.org/reseller2
+msrp:
+  EUR: 90
+  USD: 120
+
+# Photos
+photos:
+  main: windsensor.png # Image needs to have a transparent background
+  other:
+    - windsensor-package.png # Image needs to have a transparent background
+
+# Youtube or Vimeo Video (optional)
+videos:
+  main: https://www.youtube.com/watch?v=JHzxcD2oEn8
+
+# Regulatory compliances (optional)
+compliances:
+  safety:
+    - body: IEC
+      norm: EN
+      standard: 62368-1
+  radioEquipment:
+    - body: ETSI
+      norm: EN
+      standard: 301 489-1
+      version: 2.2.0
+    - body: ETSI
+      norm: EN
+      standard: 301 489-3
+      version: 2.1.0