Initial commit for Cors System Organisation

vendor/corssystem/cortu-gen-2.yaml

@@ -0,0 +1,129 @@
+name: CorTU Genesis 2 # Device name can not contain the vendor name
+description: Remote Data Acquisition Board with Support for LoRaWAN and RF
+
+# Hardware versions (optional, use when you have revisions)
+hardwareVersions:
+  - version: '1.0'
+    numeric: 1
+  - version: '1.0-rev-A'
+    numeric: 2
+
+# Firmware versions (at least one is mandatory)
+firmwareVersions:
+  - # Firmware version
+    version: '1.0'
+    numeric: 1
+    # Corresponding hardware versions (optional)
+    hardwareVersions:
+      - '1.0'
+
+    # Firmware features (optional)
+    # Valid values are: remote rejoin (trigger a join from the application layer), transmission interval (configure how
+    # often he device sends a message).
+    features:
+      - remote rejoin
+      - transmission interval
+
+    # LoRaWAN Device Profiles per region
+    # Supported regions are EU863-870, US902-928, AU915-928, AS923, CN779-787, EU433, CN470-510, KR920-923, IN865-867,
+    # RU864-870
+    profiles:
+      EU863-870:
+        # Optional identifier of the vendor of the profile. When you specify the vendorID, the profile is loaded from
+        # the vendorID's folder. This allows you to reuse profiles from module or LoRaWAN end device stack vendors.
+        # If vendorID is empty, the current vendor ID is used. In this example, the vendorID is the current vendor ID,
+        # which is verbose.
+        # vendorID: example
+        # Identifier of the profile (lowercase, alphanumeric with dashes, max 36 characters)
+        id: cortugenesis-profile
+        # lorawanCertified: true
+        codec: cortugenesis-codec
+      US902-928:
+        id: cortugenesis-profile
+        # lorawanCertified: true
+        codec: cortugenesis-codec
+
+# Type of device (optional)
+# Valid values are: devkit, module, cots
+deviceType: cots
+
+# Sensors that this device features (optional)
+# Valid values are:
+# 4-20 ma, accelerometer, altitude, analog input, auxiliary, barometer, battery, button, bvoc, co, co2, conductivity, current, digital input,
+# digital output, dissolved oxygen, distance, dust, energy, gps, gyroscope, h2s, hall effect, humidity, iaq, infrared, leaf wetness, level,
+# light, lightning, link, magnetometer, moisture, motion, nfc, no, no2, o3, occupancy, optical meter, particulate matter, ph, pir,
+# pm2.5, pm10, potentiometer, power, precipitation, pressure, proximity, pulse count, pulse frequency, radar, rainfall, reed switch, rssi,
+# sap flow, smart valve, smoke, snr, so2, solar radiation, sound, strain, surface temperature, switch, temperature, tilt, time, turbidity,
+# tvoc, uv, vapor pressure, velocity, vibration, voltage, water potential, water, weight, wifi ssid, wind direction, wind speed.
+sensors:
+  - 4-20 ma
+  - analog input
+  - digital input
+
+# Additional radios that this device has (optional)
+# Valid values are: ble, nfc, wifi, cellular.
+# additionalRadios:
+#   - ble
+#   - cellular
+
+# Bridge interfaces (optional)
+# Valid values are: modbus, m-bus, can bus, rs-485, sdi-12, analog, ethernet.
+bridgeInterfaces:
+  - modbus
+  - rs-485
+  - analog
+
+# Dimensions in mm (optional)
+# Use width, height, length and/or diameter
+dimensions:
+  width: 110
+  length: 110
+  height: 40
+
+# Weight in grams (optional)
+weight: 350
+
+# Operating conditions (optional)
+operatingConditions:
+  # Temperature (Celsius)
+  temperature:
+    min: -30
+    max: 85
+  # Relative humidity (fraction of 1)
+  relativeHumidity:
+    min: 0
+    max: 0.97
+
+# IP rating (optional)
+# ipCode: IP64
+
+# Key provisioning (optional)
+# Valid values are: custom (user can configure keys), join server and manifest.
+keyProvisioning:
+  - custom
+  - join server
+
+# Key programming (optional)
+# Valid values are: bluetooth, nfc, wifi, ethernet (via a webpage), serial (when the user has a serial interface to set the keys)
+# and firmware (when the user should change the firmware to set the keys).
+keyProgramming:
+  - serial
+  - firmware
+
+# Key security (optional)
+# Valid values are: none, read protected and secure element.
+keySecurity: none
+
+# Firmware programming (optional)
+# Valid values are: serial (when the user has a serial interface to update the firmware), ethernet, fuota lorawan (when the device
+# supports LoRaWAN FUOTA via standard interfaces) and fuota other (other wireless update mechanism).
+firmwareProgramming:
+  - serial
+  # - fuota lorawan
+
+# Product and data sheet URLs (optional)
+productURL: https://corssystem.com/products/cortu-v1-0/
+
+# Photos
+photos:
+  main: cortugenesis.png # Image needs to have a transparent background

vendor/corssystem/cortugenesis-codec.yaml

@@ -0,0 +1,3 @@
+# Uplink decoder decodes binary data uplink into a JSON object (optional)
+uplinkDecoder:
+  fileName: cortugenesis.js

vendor/corssystem/cortugenesis-profile.yaml

@@ -0,0 +1,17 @@
+# LoRaWAN MAC version: 1.0, 1.0.1, 1.0.2, 1.0.3, 1.0.4 or 1.1
+macVersion: '1.0.3'
+regionalParametersVersion: 'RP001-1.0.3-RevA'
+
+# Whether the end device supports join (OTAA) or not (ABP)
+supportsJoin: true
+
+# Maximum EIRP
+maxEIRP: 16
+# Whether the end device supports 32-bit frame counters
+supports32bitFCnt: false
+
+# Whether the end device supports class B
+supportsClassB: false
+
+# Whether the end device supports class C
+supportsClassC: false