GCViewer 1.33
=============

GCViewer is a little tool that visualizes verbose GC output
generated by Sun / Oracle, IBM, HP and BEA Java Virtual Machines. It
is free software released under GNU LGPL.

You can start GCViewer (gui) by simply double-clicking on gcviewer-1.3x.jar
or running java -jar gcviewer-1.3x.jar (it needs a java 1.7 vm to run).

For a cmdline based report summary just type:
java -jar gcviewer-1.3x.jar gc.log summary.csv [chart.png]
to generate a report (including optional chart image file). 


Supported verbose:gc formats are:

- Oracle JDK 1.8 (experimental support) -Xloggc:<file> [-XX:+PrintGCDetails] [-XX:+PrintGCDateStamps]
- Sun / Oracle JDK 1.7 with option -Xloggc:<file> [-XX:+PrintGCDetails] [-XX:+PrintGCDateStamps]
- Sun / Oracle JDK 1.6 with option -Xloggc:<file> [-XX:+PrintGCDetails] [-XX:+PrintGCDateStamps]
- Sun JDK 1.4/1.5 with the option -Xloggc:<file> [-XX:+PrintGCDetails]
- Sun JDK 1.2.2/1.3.1/1.4 with the option -verbose:gc
- IBM JDK 1.3.1/1.3.0/1.2.2 with the option -verbose:gc
- IBM iSeries Classic JVM 1.4.2 with option -verbose:gc
- HP-UX JDK 1.2/1.3/1.4.x with the option -Xverbosegc
- BEA JRockit 1.4.2/1.5/1.6 with the option -verbose:memory [-Xverbose:gcpause,gcreport] [-Xverbosetimestamp]

Best results are achieved with: -Xloggc:<file> -XX:+PrintGCDetails -XX:+PrintGCDateStamps

Hendrik Schreiber wrote GCViewer up to 1.29. What you are seeing here is based 
on his very good work.
Links to detailed descriptions of many JVM parameters relevant to garbage collection
can be found in the links section of https://github.com/chewiebug/GCViewer/wiki


GCViewer shows a number of lines etc. in a chart (first tab). These are:

- Full GC Lines:
     o Black vertical line at every Full GC
- Inc GC Lines:
     o Cyan vertical line at every Incremental GC
- GC Times Line:
     o Green line that shows the length of all GCs
- GC Times Rectangles:
     o Dark grey rectangle at every Full GC
     o Light grey rectangle at every Incremental GC
     o Grey rectangle at every 'normal' GC
- Total Heap:
     o Red line that shows heap size
- Tenured Generation:
     o Magenta area that shows the size of the tenured
       generation (not available without PrintGCDetails)
- Young Generation:
     o Orange area that shows the size of the young
       generation (not available without PrintGCDetails)
- Used Heap:
     o Blue line that shows used heap size
- Initial mark level:
     o Yellow line that shows the heap usage at "initial-mark" event
       (only available when the gc algorithm uses concurrent collections,
       which is the case for CMS and G1)
- Concurrent collections
     o Cyan vertical line for every begin (concurrent-mark-start) and
       pink vertical line for every end (CMS-concurrent-reset /
       G1: concurrent-cleanup-end) of a concurrent collection cycle

In the second tab ("Event details") it shows details about the events it parsed:
E.g. events like the following

24.187: [GC 24.188: [ParNew: 93184K->5464K(104832K), 0.0442895 secs] \
93184K->5464K(1036928K), 0.0447149 secs] \
[Times: user=0.39 sys=0.07, real=0.05 secs]

are shown in one line as
GC ParNew: <number of events parsed>, <min duration>, <max duration>...

Events like these

4183.962: [Full GC 4183.962: [CMS: 32957K->40326K(932096K), 2.3313389 secs] \
76067K->40326K(1036928K), [CMS Perm : 43837K->43453K(43880K)], 2.3339606 secs] \
[Times: user=2.33 sys=0.01, real=2.33 secs] 
 
are shown as
Full GC; CMS; CMS Perm <number of events parsed> ...

So for every line the text is extracted (not always every part of it). This allows
a user which is familiar with the text log files to find out more details about
the events that occurred.

Metrics
=======

GCViewer provides some metrics to help you interpret the graph.
Note that some metrics based on averages are shown along with
their standard deviation. If it is obvious that the standard
deviation is fairly big in comparison to the average, the values
are grayed out, indicating that actual values are much smaller
or bigger than the average.

Summary
-------

- Footprint:
     o Maximal amount of memory allocated
- Freed Memory:
     o Total amount of memory that has been freed
- Freed Mem/Min:
     o Amount of memory that has been freed per minute
- Total Time:
     o Time data was collected for (only if timestamp was present in log)
- Acc Pauses:
     o Sum of all pauses due to GC
- Throughput:
     o Time percentage the application was NOT busy with GC
- Full GC Performance:
     o Performance of full collections. Note that all collections
       that include a collection of the tenured generation or
       are marked with "Full GC" are considered Full GC.
- GC Performance:
     o Performance of minor collections. These are collections
       that are not full according to the definition above.

Memory
------

- Total heap (usage / alloc max):
     o Max memory usage / allocation in total heap (the last is the 
       same as "footprint" in Summary)
- Tenured heap (usage / alloc max):
     o Max memory usage / allocation in tenured space
- Young heap (usage / alloc max):
     o Max memory usage / allocation in young space
- Perm heap (usage / alloc max):
     o Max memory usage / allocation in perm space
- Avg after full GC:
     o The average heap memory consumption after a full collection
- Avg after GC:
     o The average heap memory consumption after a minor collection
- Freed Memory:
     o Total amount of memory that has been freed
- Freed by full GC:
     o Amount of memory that has been freed by full collections
- Freed by GC:
     o Amount of memory that has been freed by minor collections
- Avg freed full GC:
     o Average amount of memory that has been freed by full
       collections
- Avg freed GC:
     o Average amount of memory that has been freed by minor
       collections
- Avg rel inc after FGC:
     o Average relative increase in memory consumption between full
       collections. This is the average difference between the
       memory consumption after a full collection to the memory
       consumption after the next full collection.
- Avg rel inc after GC:
     o Average relative increase in memory consumption between minor
       collections. This is the average difference between the
       memory consumption after a minor collection to the memory
       consumption after the next minor collection. This can be used
       as an indicator for the amount of memory that survives
       minor collections and has to be moved to the survivor spaces
       or the tenured generation. This value added to "Avg freed GC"
       gives you an idea about the size of the young generation in case
       you don't have PrintGCDetails turned on.
- Slope full GC:
     o Slope of the regression line for the memory consumption after
       full collections. This can be used as an indicator for the
       increase in indispensable memory consumption (base footprint)
       of an application over time.
- Slope GC:
     o Average of the slope of the regression lines for the memory
       consumption after minor collections in between full collections.
       That is, if you have two full collections and many minor
       collections in between, GCViewer will calculate the slope for
       the minor collections up to the first full collection, then the
       slope of the minor collections between the first and the second
       full collection. Then it will compute a weighted average (each
       slope wil be weighted with the number of measuring points it was
       computed with).
- initiatingOccFraction (avg / max)
     o CMS GC kicks in before tenured generation is filled.
       InitiatingOccupancyFraction tells you the avg / max usage in % of the
       tenured generation, when CMS GC started (initial mark).
       This value can be set manually using 
       -XX:CMSInitiatingOccupancyFraction=<value>. 
- avg promotion
     o Promotion means the size of objects that are promoted from young
       to tenured generation during a young generation collection.
       Avg promotion shows the average amount of memory that is promoted
       from young to tenured with each young collection (only available
       with PrintGCDetails)
- total promotion
     o Total promotion shows the total amount of memory that is promoted
       from young to tenured with all young collections in a file (only 
       available with PrintGCDetails)


Pause
-----

- Acc Pauses:
     o Sum of all pauses due to any kind of GC
- Number of Pauses:
     o Count of all pauses due to any kind of GC
- Avg Pause:
     o Average length of a GC pause of any kind
- Min / max Pause:
     o Shortest /longest pause of any kind
- Avg pause interval:
     o avg interval between two pauses of any kind
- Min / max pause interval:
     o Min / max interval between two pauses of any kind

- Acc full GC:
     o Sum of all pauses due to full collections
- Number of full GC pauses:
     o Count of all pauses due to full collections
- Acc GC:
     o Sum of all full GC pauses
- Avg full GC:
     o Average length of a full GC pause
- Min / max full GC pause:
     o Shortest / longest full GC pause
     
- Acc GC:
     o Sum of all pauses due to minor collections
- Number of GC pauses:
     o Count of all pauses due to minor collections
- Avg GC:
     o Average length of a minor collection pause
- Min / max GC pause:
     o Shortest / longest minor GC pause


Notes
=====

This is not a perfect tool. However, GCViewer can help you
getting a grip on finding out what's going on in your application
with regards to garbage collection.

Here are some known limitations.


IBM JDKs
--------

If you have problems with the IBM format, please check that
every line of information is really in one line and not wrapped.

The IBM format actually provides a lot more information than is
visualized.


Sun JDK 1.3.1/1.4 with -verbose:gc
----------------------------------

Sun JDK 1.3.1/1.4 with -verbose:gc does not provide a timestamp.
Therefore values like 'Total Time', 'Throughput', and 'Freed Mem/Min'
cannot be calculated.


Sun / Oracle JDK 1.6 / 1.7 (a.k.a. Java 6 / 7)
---------------------------

CMS and G1 collector sometimes mix concurrent events with stop the world 
collections in the output. In some cases the parser can recover from 
such mixed lines, sometimes it can't and will show an error message.

If G1 collector is used with -XX:-PrintGCTimeStamps (without timestamps)
but with -XX:+PrintGCDateStamps (with full date information) GCViewer can't 
parse the log.

BEA JRockit 1.4.2/1.5/1.6
-------------------------

Concurrently collected garbage may not be reflected correctly in the
data panel.


Export formats
--------------
-> Comma Separated Values
The CSV format is quite useful for importing the data to a
spreadsheet application. However, it does not export all
data.

-> Plain Data
Plain text representation of the gc log. If written from Sun / Oracle gc log
it is usually compatible with HPjmeter.

-> Simple GC Log
Very simple representation of a gc log in the format
<name of event> <secondes since start of log> <pause time>.
This format is compatible with gchisto (http://java.net/projects/gchisto)

Internationalization
--------------------

Provided are a German, an English and a Swedish localStrings.properties
file. If someone feels the need to translate these to another
language, please do so. I will be more than glad, to include it
in a future version of this tool.


Start of log / absolute times
-----------------------------

If you happen to know when the application and GC log was started, you
can specify this time by right-clicking on the time ruler and entering
a start time.
Sun / Oracle VMs: If -XX:+PrintGCDateStamps was used, the proposed start time is 
read from the gc log file.

Bug reports
-----------

If you are a developer, you may fork (http://help.github.com/fork-a-repo/)
the repository on http://github.com/chewiebug/GCViewer and send me a 
pull request (http://help.github.com/send-pull-requests/). If you plan a bigger 
change I'd appreciate a notice in advance.

To file a bug report, please open an issue on 
http://github.com/chewiebug/GCViewer/issues or send an email to 
[email protected] with a description of the error, the 
name of the JVM that produced the GC data and all used flags along 
with a sample GC log file.


Building GCViewer from Source
-----------------------------

Download and install Maven3 from http://maven.apache.org/
Download the src distribution of GCViewer.
Execute from the GCViewer base directory (same as pom.xml):

    mvn clean install

The executable jar will be placed in the target directory.


Enjoy!

Joerg Wuethrich
http://github.com/chewiebug/GCViewer
[email protected]