Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

docs: Adds initial system test procedure #149

Open
wants to merge 1 commit into
base: main
Choose a base branch
from
Open

docs: Adds initial system test procedure #149

Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
26 changes: 26 additions & 0 deletions docs/system_test_procedure.md
View file
Open in desktop
Original file line number Diff line number Diff line change
@@ -0,0 +1,26 @@
# System Test Procedure
This procedure will test the system level functionality.

All tests shall start with the fin plugged into a computer just after a firmware install.

# Charge Test
1. Check that the LEDs are in the Charging mode.
2. Connect a serial terminal at 115200 8N1 lfcrlf.
3. Check that there is no response to any key (do not enter `#CLI`).

# CLI Mode
1. Connect a serial terminal at 115200 8N1 lfcrlf.
2. Enter `#CLI`
3. Immediately after pressing the `I` key, check that a terminal prompt appears and is legible.

# Deploy Mode
1. Disconnect the fin from the charger.
2. Check that all LEDs turn off.
3. Submerge the fin in a seawater bath.
4. Check that the LEDs are in the Deploy mode.
5. Let the fin sit for 30 minutes.
6. Pull the fin out of the water.
7. Check that the LEDs switch to the Upload mode within 1 minute.
8. Check that the fin turns off within 10 minutes.
9. Check that the appropriate amount of data was uploaded.
10. Check that the data is sane.
Loading