Merge pull request #18098 from Ultimaker/PP-422-ABS-AA025-reduce-fans…

…peed

PP-422 Fix fan speed ABS AA0.25

resources/quality/ultimaker_s3/um_s3_aa0.25_um-abs_0.1mm.inst.cfg

@@ -27,6 +27,7 @@ acceleration_wall_x = =acceleration_wall
 bridge_skin_speed = =bridge_wall_speed
 bridge_sparse_infill_max_density = 50
 bridge_wall_speed = 30
+cool_fan_speed_0 = 0
 cool_min_layer_time = 4
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 infill_sparse_density = 15

resources/quality/ultimaker_s3/um_s3_aa0.25_um-tough-pla_0.1mm.inst.cfg

@@ -12,20 +12,62 @@ variant = AA 0.25
 weight = 0
 
 [values]
-brim_width = 8
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_ironing = 1000
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
-machine_nozzle_cool_down_speed = 0.9
-machine_nozzle_heat_up_speed = 1.4
-material_print_temperature = =default_material_print_temperature - 5
-speed_print = 30
-speed_topbottom = =math.ceil(speed_print * 20 / 30)
-speed_wall = =math.ceil(speed_print * 25 / 30)
-speed_wall_0 = =math.ceil(speed_print * 20 / 30)
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_wall_0/2)
+machine_nozzle_cool_down_speed = 1.3
+machine_nozzle_heat_up_speed = 1.9
+material_extrusion_cool_down_speed = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = False
+raft_airgap = 0.25
+retraction_amount = 6.5
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_ironing = 20
+speed_layer_0 = 26
+speed_prime_tower = =speed_wall_0
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_support_interface = =speed_wall_0
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(20/100))
+speed_wall_x = =speed_wall
+speed_wall_x_roofing = =speed_roofing
 support_bottom_distance = =support_z_distance
 support_interface_enable = True
+support_structure = tree
 support_top_distance = =support_z_distance
 support_z_distance = =math.ceil(0.3/layer_height)*layer_height
-top_bottom_thickness = 0.72
-wall_0_inset = 0.015
-wall_0_wipe_dist = 0.25
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True
 

resources/quality/ultimaker_s5/um_s5_aa0.25_um-abs_0.1mm.inst.cfg

@@ -27,6 +27,7 @@ acceleration_wall_x = =acceleration_wall
 bridge_skin_speed = =bridge_wall_speed
 bridge_sparse_infill_max_density = 50
 bridge_wall_speed = 30
+cool_fan_speed_0 = 0
 cool_min_layer_time = 4
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
 infill_sparse_density = 15

resources/quality/ultimaker_s5/um_s5_aa0.25_um-tough-pla_0.1mm.inst.cfg

@@ -12,20 +12,62 @@ variant = AA 0.25
 weight = 0
 
 [values]
-brim_width = 8
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
+_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
+acceleration_infill = =acceleration_print
+acceleration_ironing = 1000
+acceleration_layer_0 = =acceleration_wall_0
+acceleration_print = 3500
+acceleration_roofing = =acceleration_wall_0
+acceleration_topbottom = =acceleration_wall
+acceleration_wall = =acceleration_infill
+acceleration_wall_0 = 1500
+acceleration_wall_x = =acceleration_wall
+bridge_skin_speed = =bridge_wall_speed
+bridge_sparse_infill_max_density = 50
+bridge_wall_speed = 30
+cool_min_layer_time = 6
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
-machine_nozzle_cool_down_speed = 0.9
-machine_nozzle_heat_up_speed = 1.4
-material_print_temperature = =default_material_print_temperature - 5
-speed_print = 30
-speed_topbottom = =math.ceil(speed_print * 20 / 30)
-speed_wall = =math.ceil(speed_print * 25 / 30)
-speed_wall_0 = =math.ceil(speed_print * 20 / 30)
+infill_sparse_density = 15
+jerk_infill = =jerk_print
+jerk_layer_0 = =jerk_wall_0
+jerk_print = =max(30, speed_print/2)
+jerk_roofing = =jerk_wall_0
+jerk_topbottom = =jerk_wall
+jerk_wall = =jerk_infill
+jerk_wall_0 = =max(30, speed_wall_0/2)
+machine_nozzle_cool_down_speed = 1.3
+machine_nozzle_heat_up_speed = 1.9
+material_extrusion_cool_down_speed = 0.7
+optimize_wall_printing_order = False
+prime_tower_enable = False
+raft_airgap = 0.25
+retraction_amount = 6.5
+retraction_prime_speed = =retraction_speed
+retraction_speed = 45
+small_skin_on_surface = False
+small_skin_width = 4
+speed_infill = =speed_print
+speed_ironing = 20
+speed_layer_0 = 26
+speed_prime_tower = =speed_wall_0
+speed_print = 100
+speed_roofing = =math.ceil(speed_wall*(45/100))
+speed_support_interface = =speed_wall_0
+speed_topbottom = =speed_print
+speed_wall = =speed_infill
+speed_wall_0 = =math.ceil(speed_wall*(20/100))
+speed_wall_x = =speed_wall
+speed_wall_x_roofing = =speed_roofing
 support_bottom_distance = =support_z_distance
 support_interface_enable = True
+support_structure = tree
 support_top_distance = =support_z_distance
 support_z_distance = =math.ceil(0.3/layer_height)*layer_height
-top_bottom_thickness = 0.72
-wall_0_inset = 0.015
-wall_0_wipe_dist = 0.25
+top_bottom_thickness = =max(1 , layer_height * 5)
+wall_0_wipe_dist = 0.8
+z_seam_relative = True
+z_seam_type = back
+zig_zaggify_infill = True