- Add prime tower when raft uses Method support materials (even when …

…self upport is enabled).

- In principle the prime tower should also be on when two model materials are used. However, Method machine do not support this.

PP-401

ultimaker_abscf_175.xml.fdm_material

@@ -7,7 +7,7 @@
             <color>Generic</color>
         </name>
         <GUID>495a0ce5-9daf-4a16-b7b2-06856d82394d</GUID>
-        <version>4</version>
+        <version>5</version>
         <color_code>#0e0e10</color_code>
         <description>The performance of carbon fiber with the reliability of ABS</description>
         <adhesion_info>No glue needed</adhesion_info>
@@ -46,6 +46,7 @@
                 <setting key="hardware compatible">yes</setting>
             </hotend>
         </machine>
+
         <machine>
             <machine_identifier manufacturer="Ultimaker B.V." product="UltiMaker Method XL"/>
             <setting key="build volume temperature">85</setting>
@@ -65,7 +66,7 @@
             <hotend id="1C">
                 <setting key="hardware compatible">yes</setting>
             </hotend>
-            <hotend id="Lab">
+            <hotend id="LABS">
                 <setting key="hardware compatible">yes</setting>
             </hotend>
         </machine>

ultimaker_absr_175.xml.fdm_material

@@ -7,7 +7,7 @@
             <color>Generic</color>
         </name>
         <GUID>88c8919c-6a09-471a-b7b6-e801263d862d</GUID>
-        <version>4</version>
+        <version>5</version>
         <color_code>#8cb219</color_code>
         <description>Tough and durable. ABS is good for mechanical parts. It is impact resistant, dimensionally stable and handles temperatures up to 85ºC.</description>
         <adhesion_info>No glue needed</adhesion_info>
@@ -42,7 +42,7 @@
             <hotend id="1C">
                 <setting key="hardware compatible">yes</setting>
             </hotend>
-            <hotend id="Lab">
+            <hotend id="LABS">
                 <setting key="hardware compatible">yes</setting>
             </hotend>
         </machine>
@@ -65,7 +65,7 @@
             <hotend id="1C">
                 <setting key="hardware compatible">yes</setting>
             </hotend>
-            <hotend id="Lab">
+            <hotend id="LABS">
                 <setting key="hardware compatible">yes</setting>
             </hotend>
         </machine>

ultimaker_rapidrinse_175.xml.fdm_material

@@ -7,7 +7,7 @@
             <color>Generic</color>
         </name>
         <GUID>a140ef8f-4f26-4e73-abe0-cfc29d6d1024</GUID>
-        <version>5</version>
+        <version>6</version>
         <color_code>#f5f2d1</color_code>
         <description>Water soluble support material for ABS-R.</description>
         <adhesion_info>Use the same temperatures and adhesion method as your build material(s).</adhesion_info>
@@ -28,7 +28,7 @@
 
         <!-- Define as soluble support material -->
         <cura:setting key="material_is_support_material">True</cura:setting>
-        <cura:setting key="prime_tower_enable">=extruder_nr==support_extruder_nr</cura:setting>
+        <cura:setting key="prime_tower_enable">=extruder_nr==support_extruder_nr or extruder_nr==raft_base_extruder_nr or extruder_nr==raft_interface_extruder_nr or extruder_nr==raft_surface_extruder_nr</cura:setting>
         <cura:setting key="support_conical_enabled">True</cura:setting>
 
         <machine>
@@ -49,10 +49,9 @@
             <hotend id="1C">
                 <setting key="hardware compatible">no</setting>
             </hotend>
-            <hotend id="Lab">
+            <hotend id="LABS">
                 <setting key="hardware compatible">no</setting>
             </hotend>
         </machine>
-
     </settings>
 </fdmmaterial>