Skip to content

Version 2102.60
Compare
Choose a tag to compare
@gus33000 gus33000 released this 17 Feb 16:51
· 111 commits to main since this release
v2102.60
d298ca4

Lumia Drivers BSP - Version 2102.60

Released: 02/17/2021 18:00 PM UTC+1

Quality: Interim

Important installation notes

image

Please make sure your battery is fully charged before installing this driver pack. For most batteries the charge must be 100% as the phone may shutdown during setup if the battery is even at 80% charge.
Make sure battery is charged to 100% before continuing. If this is not the case, reboot your device now and charge it in an Operating System.

Reminder: if you are using WOA Deployer, please do not use the "Force Dual Boot" button, otherwise the setup process
will FAIL.

Release notes

Changelog

  • Addresses an issue impacting GPS functionality
  • Addresses an issue impacting Cellular functionality on build 21317 and higher
  • Addresses an issue impacting Cellular functionality on build 18908 and lower
  • General improvements to Cellular Stack
  • Updated Chat application
  • Preparations for an upcoming update
  • Nothing more. This release contains no new functionality notable, and will not get offered FFU releases, or 10X variants.

NEW issues

  • Updating to this release might cause in some cases a BSOD with "CRITICAL_PROCESS_DIED". If this is your case
    go to mass storage mode, and delete \Windows\System32\RILAdaptationService.exe. Reboot, and installation will proceed.
    In case it still doesn't, mount \Windows\System32\config\SYSTEM in regedit. Delete \ControlSet001\Services\RILAdaptation

  • A very slim percentage of users are experiencing SDBUS_INTERNAL_ERROR issues.
    If this is your case, go to mass storage mode, mount \Windows\System32\config\SYSTEM in regedit
    Set the following entries

    [HKEY_LOCAL_MACHINE\RTSYSTEM\ControlSet001\services\SdBus\Parameters]
    "DisableHS200Support"=dword:00000001
    "DisableHS400Support"=dword:00000001
    "DisableUhsSupport"=dword:00000001

    Unmount the registry hive, and reboot

  • Some users might end up being unable to send texts on build 18908 and lower. To address this issue, open regedit on
    the device, go to HKLM\SOFTWARE\Microsoft\Messaging\IMEISpecific (or IMSISpecific), right click, go to security
    Tap advanced, tap change owner, in the dialog that opens, enter "Everyone" (without the quotes), tap check names
    press ok, press ok. Tap ALL APPLICATION PACKAGES, select 'full control', do the same for other listed accounts (optionally)
    Apply, and close regedit.

How to offline update an existing Windows Desktop installation

  • Switch the device into mass storage.

  • Take note of the drive letter the Windows partition is using, here we will assume it got mounted as I:

  • Download [Source Code (zip)] from https://github.com/WOA-Project/Lumia-Drivers/releases/latest

  • Extract said zip file to a folder of your choice, we will assume here we extracted it to C:\UpdatedDrivers

  • Download the DriverUpdater utility from https://github.com/WOA-Project/DriverUpdater/releases/latest

  • Open a command prompt as administrator, where the driver utility got downloaded

  • If your device is a Lumia 950, execute the following command:

    DriverUpdater.exe C:\UpdatedDrivers\Lumia-Drivers-XXXX\definitions\950.txt C:\UpdatedDrivers\Lumia-Drivers-XXXX\ I:\

  • If your device is a Lumia 950 XL, execute the following command:

    DriverUpdater.exe C:\UpdatedDrivers\Lumia-Drivers-XXXX\definitions\950xl.txt C:\UpdatedDrivers\Lumia-Drivers-XXXX\ I:\

  • Reboot the device, the device will now begin PnP setup once again, and hopefully you will be back soon enough to your desktop

Hardware specific defects

  • A considerable amount of Lumia 950 and Lumia 950 XL devices do not work with the HP lapdock properly when using a wired connection

General software defects

  • Under certain circumstances, the Lumia 950 (''Talkman'') may fail to reboot properly. Shut down the device via other means (Developer Menu / Flash App & THOR2). This happens during Setup, where the device will display a black screen
  • Cameras are not available
  • Windows Hello Iris Scanner is not available
  • Hyper-V is not available
  • SD Card Boot is not available
  • Battery life is degraded
  • GPS stack is not using any sensor for navigation
  • Miracast is not functional with many wireless devices, but works fine on Xbox, and Windows 10 computers
  • Graphical glitches can be observed with acrylic effects on builds lower or equal than 20100
  • Graphical glitches can be observed on shadows
  • MTP may fail to start if the device is plugged a second time, stop the NcsdService to fix the issue via task manager
  • Dual SIM devices are unsupported for Cellular, do not expect cellular to work properly on these
  • DirectX is unavailable for x86 and amd64 applications
  • No VoLTE
  • No VoWiFi
  • No Cellular data sharing
  • Phone Calls require manual provisioning by the user on builds higher than 18363
  • Text messages are unavailable on builds higher then 18363
  • Microphone level under Settings is stuck at 50%
  • Phone may not boot reliably or have random reboots when the battery falls below 50% on certain devices, if all cores are enabled.
    As a workaround, you can run "bcdedit /set numproc 4" to disable the second core cluster

Deprecation notice

  • Support for Build 18363 has ended, we cannot guarentee anymore that things will continue to work due to ongoing testing being halted.
    18363 and lower are over 3 years old. Please upgrade to 19041 or higher.

  • Build 17763 is deprecated and will not boot successfully anymore [<= 18363 is deprecated, see above]

  • Volume / Audio switching is broken on 18363 [Won't fix, <= 18363 is deprecated, see above]

  • Night light is broken on 18363 [Won't fix, <= 18363 is deprecated, see above]

Windows 10 software defects

  • Applications do not get installed if the user reboots the device on first boot before completion.
    As a workaround, find the "Second Party Application Provisioner" application in the start menu, right click, run as administrator
  • System reset is not supported
  • First boot can have bad thermal performance due to Windows initial app installation.
    While leaving the phone plugged in to a wall charger, let it install all applications, all app updates through the store, and OneDrive. Then let the phone cool down

Windows 10X software defects

  • Vibration is unavailable
  • Under certain circumstances, Windows may fail booting on talkman devices when AutoChk runs (repairing drive at boot). If this is your case, let the device reboot a couple of times, or reflash the FFU file til the issue vanishes
  • Second Party Apps are not available
  • Cellular data is unavailable

Bug reporting

This release is a Preview release. Bug exists and may happen. If you notice a bug not present in the following bug list, please report them on our Telegram Group.

-- WOA-Project Team

Assets 28
Loading