added WLP Bench Board Folder

Libraries/Boards/MAX32657/WLP_Bench/Include/board.h

@@ -0,0 +1,88 @@
+/******************************************************************************
+ *
+ * Copyright (C) 2024 Analog Devices, Inc.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************/
+
+/**
+ * @file    board.h
+ * @brief   Board support package API.
+ */
+
+#include <stdio.h>
+
+// TODO(ME30): Update this file to match first EVKIT
+
+#ifndef LIBRARIES_BOARDS_MAX32657_EVKIT_V1_INCLUDE_BOARD_H_
+#define LIBRARIES_BOARDS_MAX32657_EVKIT_V1_INCLUDE_BOARD_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef CONSOLE_UART
+#define CONSOLE_UART 0 /// UART instance to use for console
+#endif
+
+#ifndef CONSOLE_BAUD
+#define CONSOLE_BAUD 115200 /// Console baud rate
+#endif
+
+#ifdef LED_OFF
+#undef LED_OFF
+#endif
+#define LED_OFF 1 /// Override inactive state of LEDs
+
+#ifdef LED_ON
+#undef LED_ON
+#endif
+#define LED_ON 0 /// Override active state of LEDs
+
+#define LED1 0
+#define LED_RED LED1
+
+#define LED2 1
+#define LED_GREEN LED2
+
+/**
+ * \brief   Initialize the BSP and board interfaces.
+ * \returns #E_NO_ERROR if everything is successful
+ */
+int Board_Init(void);
+
+/**
+ * \brief   Initialize or reinitialize the console. This may be necessary if the
+ *          system clock rate is changed.
+ * \returns #E_NO_ERROR if everything is successful
+ */
+int Console_Init(void);
+
+/**
+ * \brief   Shutdown the console.
+ * \returns #E_NO_ERROR if everything is successful
+ */
+int Console_Shutdown(void);
+
+/**
+ * \brief   Attempt to prepare the console for sleep.
+ * \returns #E_NO_ERROR if ready to sleep, #E_BUSY if not ready for sleep.
+ */
+int Console_PrepForSleep(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // LIBRARIES_BOARDS_MAX32657_EVKIT_V1_INCLUDE_BOARD_H_

Libraries/Boards/MAX32657/WLP_Bench/Source/board.c

@@ -0,0 +1,127 @@
+/******************************************************************************
+ *
+ * Copyright (C) 2024 Analog Devices, Inc.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************/
+
+#include <stdio.h>
+#include "mxc_device.h"
+#include "mxc_sys.h"
+#include "mxc_assert.h"
+#include "board.h"
+#include "uart.h"
+#include "gpio.h"
+#include "mxc_pins.h"
+#include "led.h"
+#include "pb.h"
+
+/***** Global Variables *****/
+mxc_uart_regs_t *ConsoleUart = MXC_UART_GET_UART(CONSOLE_UART);
+extern uint32_t SystemCoreClock;
+
+// clang-format off
+const mxc_gpio_cfg_t pb_pin[] = {
+    // TODO(ME30): Add push-buttons
+    { MXC_GPIO0, MXC_GPIO_PIN_0, MXC_GPIO_FUNC_IN, MXC_GPIO_PAD_PULL_UP, MXC_GPIO_VSSEL_VDDIO, MXC_GPIO_DRVSTR_0 }
+};
+const unsigned int num_pbs = (sizeof(pb_pin) / sizeof(mxc_gpio_cfg_t));
+
+const mxc_gpio_cfg_t led_pin[] = {
+    // System LED
+    { MXC_GPIO0, MXC_GPIO_PIN_1, MXC_GPIO_FUNC_OUT, MXC_GPIO_PAD_NONE, MXC_GPIO_VSSEL_VDDIO, MXC_GPIO_DRVSTR_0 }
+    { MXC_GPIO0, MXC_GPIO_PIN_8, MXC_GPIO_FUNC_OUT, MXC_GPIO_PAD_NONE, MXC_GPIO_VSSEL_VDDIO, MXC_GPIO_DRVSTR_0 }
+
+    //BLE Debug
+    { MXC_GPIO0, MXC_GPIO_PIN_10, MXC_GPIO_FUNC_OUT, MXC_GPIO_PAD_NONE, MXC_GPIO_VSSEL_VDDIO, MXC_GPIO_DRVSTR_0 } // TX
+    { MXC_GPIO0, MXC_GPIO_PIN_11, MXC_GPIO_FUNC_OUT, MXC_GPIO_PAD_NONE, MXC_GPIO_VSSEL_VDDIO, MXC_GPIO_DRVSTR_0 } // RX 
+    { MXC_GPIO0, MXC_GPIO_PIN_12, MXC_GPIO_FUNC_OUT, MXC_GPIO_PAD_NONE, MXC_GPIO_VSSEL_VDDIO, MXC_GPIO_DRVSTR_0 } // RX OK
+    { MXC_GPIO0, MXC_GPIO_PIN_13, MXC_GPIO_FUNC_OUT, MXC_GPIO_PAD_NONE, MXC_GPIO_VSSEL_VDDIO, MXC_GPIO_DRVSTR_0 } // RX Timeout
+    { MXC_GPIO0, MXC_GPIO_PIN_2, MXC_GPIO_FUNC_OUT, MXC_GPIO_PAD_NONE, MXC_GPIO_VSSEL_VDDIO, MXC_GPIO_DRVSTR_0 } // RX CRC FAIL
+    { MXC_GPIO0, MXC_GPIO_PIN_7, MXC_GPIO_FUNC_OUT, MXC_GPIO_PAD_NONE, MXC_GPIO_VSSEL_VDDIO, MXC_GPIO_DRVSTR_0 } // BB ISR
+
+};
+const unsigned int num_leds = (sizeof(led_pin) / sizeof(mxc_gpio_cfg_t));
+// clang-format on
+
+/***** File Scope Variables *****/
+
+/******************************************************************************/
+void mxc_assert(const char *expr, const char *file, int line)
+{
+    printf("MXC_ASSERT %s #%d: (%s)\n", file, line, expr);
+
+    while (1) {}
+}
+
+/******************************************************************************/
+/** 
+ * NOTE: This weak definition is included to support Push Button interrupts in
+ *       case the user does not define this interrupt handler in their application.
+ **/
+__weak void GPIO0_IRQHandler(void)
+{
+    MXC_GPIO_Handler(MXC_GPIO_GET_IDX(MXC_GPIO0));
+}
+
+/******************************************************************************/
+int Board_Init(void)
+{
+    int err;
+
+    if ((err = Console_Init()) < E_NO_ERROR) {
+        return err;
+    }
+
+    if ((err = PB_Init()) != E_NO_ERROR) {
+        MXC_ASSERT_FAIL();
+        return err;
+    }
+
+    if ((err = LED_Init()) != E_NO_ERROR) {
+        MXC_ASSERT_FAIL();
+        return err;
+    }
+
+    return E_NO_ERROR;
+}
+
+/******************************************************************************/
+int Console_Init(void)
+{
+    int err;
+
+    if ((err = MXC_UART_Init(ConsoleUart, CONSOLE_BAUD, MXC_UART_APB_CLK)) != E_NO_ERROR) {
+        return err;
+    }
+
+    return E_NO_ERROR;
+}
+
+int Console_Shutdown(void)
+{
+    int err;
+
+    if ((err = MXC_UART_Shutdown(ConsoleUart)) != E_NO_ERROR) {
+        return err;
+    }
+
+    return E_NO_ERROR;
+}
+
+/******************************************************************************/
+void NMI_Handler(void)
+{
+    __NOP();
+}

Libraries/Boards/MAX32657/WLP_Bench/adapters.txt

@@ -0,0 +1,2 @@
+CMSIS-DAP, interface/cmsis-dap.cfg
+MAX32625_PICO, interface/cmsis-dap.cfg

Libraries/Boards/MAX32657/WLP_Bench/board.mk

@@ -0,0 +1,41 @@
+###############################################################################
+ #
+ # Copyright (C) 2024 Analog Devices, Inc.
+ #
+ # Licensed under the Apache License, Version 2.0 (the "License");
+ # you may not use this file except in compliance with the License.
+ # You may obtain a copy of the License at
+ #
+ #     http://www.apache.org/licenses/LICENSE-2.0
+ #
+ # Unless required by applicable law or agreed to in writing, software
+ # distributed under the License is distributed on an "AS IS" BASIS,
+ # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ # See the License for the specific language governing permissions and
+ # limitations under the License.
+ #
+ ##############################################################################
+
+ifeq "$(BOARD_DIR)" ""
+BOARD_DIR := $(dir $(abspath $(lastword $(MAKEFILE_LIST))))
+endif
+
+# Source files for this test (add path to VPATH below)
+SRCS += board.c
+SRCS += stdio.c
+SRCS += led.c
+SRCS += pb.c
+
+MISC_DRIVERS_DIR ?= $(MAXIM_PATH)/Libraries/MiscDrivers
+
+# Where to find BSP source files
+VPATH += $(BOARD_DIR)/Source
+VPATH += $(MISC_DRIVERS_DIR)
+VPATH += $(MISC_DRIVERS_DIR)/LED
+VPATH += $(MISC_DRIVERS_DIR)/PushButton
+
+# Where to find BSP header files
+IPATH += $(BOARD_DIR)/Include
+IPATH += $(MISC_DRIVERS_DIR)
+IPATH += $(MISC_DRIVERS_DIR)/LED
+IPATH += $(MISC_DRIVERS_DIR)/PushButton

Libraries/Boards/MAX32657/WLP_Bench/examples.txt

@@ -0,0 +1 @@
+TODO: Add list of supported examples

Libraries/Boards/MAX32657/WLP_Bench/target.txt

@@ -0,0 +1 @@
+max32657.cfg