Add tests for adistream cli tool

Signed-off-by: SGudla <[email protected]>

adi/tools/adistream.py

@@ -74,6 +74,7 @@ def __init__(
         )
         self.stream.tx_cyclic_buffer = True
         self.wave_list = wave_list
+        self.stream._ctx.set_timeout(100000)
 
         # Sort channels list
         chn_list.sort()

test/test_adistream.py

@@ -0,0 +1,193 @@
+import argparse
+
+import pytest
+try:
+    from adi.tools.adistream import run_adi_stream
+except:
+    pytest.skip(allow_module_level=True)
+
+hardware = "ad5780"
+ref_neg = "-10"
+ref_pos = "+10"
+
+
+#########################################
+@pytest.mark.iio_hardware(hardware, True)
+@pytest.mark.parametrize("classname", [("ad578x")])
+@pytest.mark.parametrize("code_sel", ["0", "1"])
+@pytest.mark.parametrize(
+    "wave_types", ["sine", "cosine", "triangular", "square", "pwm"]
+)
+@pytest.mark.parametrize("v_lower_req, v_upper_req", [("-5", "5"), ("0", "10")])
+@pytest.mark.parametrize("channel_order", ["asc", "desc"])
+@pytest.mark.parametrize("output_freq", ["100", "500"])
+def test_adistream_vaild_inputs(
+    capsys,
+    classname,
+    iio_uri,
+    code_sel,
+    wave_types,
+    v_lower_req,
+    v_upper_req,
+    channel_order,
+    output_freq,
+):
+    run_adi_stream(
+        [
+            classname,
+            iio_uri,
+            ref_neg,
+            ref_pos,
+            "--output_freq",
+            output_freq,
+            "--code_sel",
+            code_sel,
+            "--wave_types",
+            wave_types,
+            "--v_lower_req",
+            v_lower_req,
+            "--v_upper_req",
+            v_upper_req,
+            "--channel_order",
+            channel_order,
+        ],
+        True,
+    )
+    captured = capsys.readouterr()
+    assert (
+        captured.out == "Press escape key to stop cyclic data streaming..\n"
+        "Data streaming started\n\r\n"
+        "Data streaming finished\n"
+    )
+
+
+#########################################
+@pytest.mark.iio_hardware(hardware, True)
+@pytest.mark.parametrize("wave_types", ["pwm"])
+@pytest.mark.parametrize("duty_cycle", ["10", "50", "75", "90"])
+@pytest.mark.parametrize("classname", [("ad578x")])
+def test_adistream_dutycycle(capsys, classname, iio_uri, wave_types, duty_cycle):
+    run_adi_stream(
+        [
+            classname,
+            iio_uri,
+            ref_neg,
+            ref_pos,
+            "--wave_types",
+            wave_types,
+            "--duty_cycle",
+            duty_cycle,
+        ],
+        True,
+    )
+    captured = capsys.readouterr()
+    assert (
+        captured.out == "Press escape key to stop cyclic data streaming..\n"
+        "Data streaming started\n\r\n"
+        "Data streaming finished\n"
+    )
+
+
+#########################################
+@pytest.mark.iio_hardware(hardware, True)
+@pytest.mark.parametrize("upper_req", ["15"])
+@pytest.mark.parametrize("classname", [("ad578x")])
+def test_adistream_voltages_1(classname, iio_uri, upper_req):
+    with pytest.raises(Exception) as context:
+        run_adi_stream(
+            [classname, iio_uri, ref_neg, ref_pos, "--v_upper_req", upper_req], True
+        )
+
+    assert (
+        str(context.value)
+        == "required upper voltage cannot be greater than upper voltage reference"
+    )
+
+
+#########################################
+@pytest.mark.iio_hardware(hardware, True)
+@pytest.mark.parametrize("lower_req", ["-15"])
+@pytest.mark.parametrize("classname", [("ad578x")])
+def test_adistream_voltages_2(classname, iio_uri, lower_req):
+    with pytest.raises(Exception) as context:
+        run_adi_stream(
+            [classname, iio_uri, ref_neg, ref_pos, "--v_lower_req", lower_req], True
+        )
+
+    assert (
+        str(context.value)
+        == "required lower voltage cannot be less than lower voltage reference"
+    )
+
+
+#########################################
+@pytest.mark.iio_hardware(hardware, True)
+@pytest.mark.parametrize("data_points", [("-10"), ("0")])
+@pytest.mark.parametrize("classname", [("ad578x")])
+def test_adistream_datapoints(classname, iio_uri, data_points):
+    with pytest.raises(argparse.ArgumentTypeError) as context:
+        run_adi_stream(
+            [
+                classname,
+                iio_uri,
+                ref_neg,
+                ref_pos,
+                "--data_points_per_wave",
+                data_points,
+            ],
+            True,
+        )
+
+    assert str(context.value) == "data points must be greater than 0"
+
+
+#########################################
+@pytest.mark.iio_hardware(hardware, True)
+@pytest.mark.parametrize("classname", [("ad1234"), ("ad1123x")])
+def test_adistream_invalid_classnames_1(classname, iio_uri):
+    with pytest.raises(Exception) as context:
+        run_adi_stream([classname, iio_uri, ref_neg, ref_pos], True)
+
+    assert (
+        str(context.value)
+        == f"The device {classname} is not supported. Supported devices are: "
+        "ad578x,ad3552r,ad3530r,ad5754r,ad9152,ad9172\n"
+        "Enable test_device (-t) flag to test devices not part of the supported "
+        "devices list."
+    )
+
+
+#########################################
+@pytest.mark.iio_hardware(hardware, True)
+@pytest.mark.parametrize("classname", [("ad1234"), ("ad1123x")])
+def test_adistream_invalid_classnames_2(classname, iio_uri):
+    with pytest.raises(AttributeError) as context:
+        run_adi_stream([classname, iio_uri, ref_neg, ref_pos, "--test_device"], True)
+
+    assert str(context.value) == f"module 'adi' has no attribute '{classname}'"
+
+
+#########################################
+@pytest.mark.iio_hardware(hardware, True)
+@pytest.mark.parametrize("output_freq", [("-10"), ("0")])
+@pytest.mark.parametrize("classname", [("ad578x")])
+def test_adistream_output_freq(classname, iio_uri, output_freq):
+    with pytest.raises(argparse.ArgumentTypeError) as context:
+        run_adi_stream(
+            [classname, iio_uri, ref_neg, ref_pos, "--output_freq", output_freq], True
+        )
+
+    assert str(context.value) == "output frequency required cannot be a negative number"
+
+
+#########################################
+@pytest.mark.iio_hardware(hardware, True)
+@pytest.mark.parametrize("duty_cycle", [("-10"), ("110")])
+@pytest.mark.parametrize("classname", [("ad578x")])
+def test_adistream_invalid_duty_cycle(classname, iio_uri, duty_cycle):
+    with pytest.raises(argparse.ArgumentTypeError) as context:
+        run_adi_stream(
+            [classname, iio_uri, ref_neg, ref_pos, "--duty_cycle", duty_cycle], True
+        )
+
+    assert str(context.value) == "Duty cycle shall be in between 0 and 100"