everyauth

Authentication and authorization (password, facebook, & more) for your node.js Connect and Express apps.

So far, everyauth enables you to login via:

password
OpenId (Credits RocketLabs Development, Andrew Mee, Brian Noguchi)
- Google Hybrid (Credits RocketLabs Development)
OAuth
- twitter
- linkedin
- yahoo
- readability (Credits Alfred Nerstu)
- dropbox (Credits Torgeir)
- justin.tv (Credits slickplaid)
- vimeo (Credits slickplaid)
OAuth2
- facebook
- github
- instagram
- foursquare
- google
box (Box.net)
LDAP (experimental; not production-tested)

everyauth is:

Modular - We have you covered with Facebook and Twitter OAuth logins, basic login/password support, and modules coming soon for beta invitation support and more.
Easily Configurable - everyauth was built with powerful configuration needs in mind. Configure an authorization strategy in a straightforward, easy-to-read & easy-to-write approach, with as much granularity as you want over the steps and logic of your authorization strategy.
Idiomatic - The syntax for configuring and extending your authorization strategies are idiomatic and chainable.

Installation

$ npm install everyauth

Quick Start

Using everyauth comes down to just 2 simple steps if using Connect or 3 simple steps if using Express:

Choose and Configure Auth Strategies - Find the authentication strategy you desire in one of the sections below. Follow the configuration instructions.

Add the Middleware to Connect

var everyauth = require('everyauth');
// Step 1 code goes here

// Step 2 code
var connect = require('connect');
var app = connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'mr ripley'})
  , everyauth.middleware()
  , connect.router(routes)
);

Add View Helpers to Express
```
// Step 1 code
// ...
// Step 2 code
// ...

// Step 3 code
everyauth.helpExpress(app);

app.listen(3000);
```
For more about what view helpers everyauth adds to your app, see the section titled "Express Helpers" near the bottom of this README.

Example Application

There is an example application at ./example

To run it:

$ cd example
$ node server.js

Important - Some OAuth Providers do not allow callbacks to localhost, so you will need to create a localhost alias called local.host. Make sure you set up your /etc/hosts so that 127.0.0.1 is also associated with 'local.host'. So inside your /etc/hosts file, one of the lines will look like:

127.0.0.1	localhost local.host

Then point your browser to http://local.host:3000

Tests

First, spin up the example server (See last section "Example Application").

Then,

$ make test

Logging Out

If you integrate everyauth with connect, then everyauth automatically sets up a logoutPath at GET /logout for your app. It also sets a default handler for your logout route that clears your session of auth information and redirects them to '/'.

To over-write the logout path:

everyauth.everymodule.logoutPath('/bye');

To over-write the logout redirect path:

everyauth.everymodule.logoutRedirectPath('/navigate/to/after/logout');

To over-write the logout handler:

everyauth.everymodule.handleLogout( function (req, res) {
  // Put you extra logic here
  
  req.logout(); // The logout method is added for you by everyauth, too
  
  // And/or put your extra logic here
  
  res.writeHead(303, { 'Location': this.logoutRedirectPath() });
  res.end();
});

Setting up Facebook Connect

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.facebook
  .appId('YOUR APP ID HERE')
  .appSecret('YOUR APP SECRET HERE')
  .handleAuthCallbackError( function (req, res) {
    // If a user denies your app, Facebook will redirect the user to
    // /auth/facebook/callback?error_reason=user_denied&error=access_denied&error_description=The+user+denied+your+request.
    // This configurable route handler defines how you want to respond to
    // that.
    // If you do not configure this, everyauth renders a default fallback
    // view notifying the user that their authentication failed and why.
  })
  .findOrCreateUser( function (session, accessToken, accessTokExtra, fbUserMetadata) {
    // find or create user logic goes here
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.facebook
  .entryPath('/auth/facebook')
  .callbackPath('/auth/facebook/callback')
  .scope('email')                // Defaults to undefined

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.facebook.scope(); // undefined
everyauth.facebook.entryPath(); // '/auth/facebook'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.facebook.configurable();

Dynamic Facebook Connect Scope

Facebook provides many different permissions for which your app can ask your user. This is bundled up in the scope query paremter sent with the oauth request to Facebook. While your app may require several different permissions from Facebook, Facebook recommends that you only ask for these permissions incrementally, as you need them. For example, you might want to only ask for the "email" scope upon registration. At the same time, for another user, you may want to ask for "user_status" permissions because they have progressed further along in your application.

everyauth enables you to specify the "scope" dynamically with a second variation of the configurable scope. In addition to the first variation that looks like:

everyauth.facebook
  .scope('email,user_status');

you can have greater dynamic control over "scope" via the second variation of scope:

everyauth.facebook
  .scope( function (req, res) {
    var session = req.session;
    switch (session.userPhase) {
      case 'registration':
        return 'email';
      case 'share-media':
        return 'email,user_status';
    }
  });

Setting up Twitter OAuth

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.twitter
  .consumerKey('YOUR CONSUMER ID HERE')
  .consumerSecret('YOUR CONSUMER SECRET HERE')
  .findOrCreateUser( function (session, accessToken, accessTokenSecret, twitterUserMetadata) {
    // find or create user logic goes here
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

Important - Some developers forget to do the following, and it causes them to have issues with everyauth. Please make sure to do the following: When you set up your app at http://dev.twitter.com/, make sure that your callback url is set up to include that path '/auth/twitter/callback/'. In general, when dealing with OAuth or OAuth2 modules provided by everyauth, the default callback path is always set up to follow the pattern '/auth/#{moduleName}/callback', so just ensure that you configure your OAuth settings accordingly with the OAuth provider -- in this case, the "Edit Application Settings" section for your app at http://dev.twitter.com.

Alternatively, you can specify the callback url at the application level by configuring callbackPath (which has a default configuration of "/auth/twitter/callback"):

everyauth.twitter
  .consumerKey('YOUR CONSUMER ID HERE')
  .consumerSecret('YOUR CONSUMER SECRET HERE')
  .callbackPath('/custom/twitter/callback/path')
  .findOrCreateUser( function (session, accessToken, accessTokenSecret, twitterUserMetadata) {
    // find or create user logic goes here
  })
  .redirectPath('/');

So if your hostname is example.com, then this configuration will over-ride the dev.twitter.com callback url configuration. Instead, Twitter will redirect back to example.com/custom/twitter/callback/path in the example just given above.

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.twitter
  .entryPath('/auth/twitter')
  .callbackPath('/auth/twitter/callback');

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.twitter.callbackPath(); // '/auth/twitter/callback'
everyauth.twitter.entryPath(); // '/auth/twitter'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.twitter.configurable();

Setting up Password Authentication

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.password
  .getLoginPath('/login') // Uri path to the login page
  .postLoginPath('/login') // Uri path that your login form POSTs to
  .loginView('a string of html; OR the name of the jade/etc-view-engine view')
  .authenticate( function (login, password) {
    // Either, we return a user or an array of errors if doing sync auth.
    // Or, we return a Promise that can fulfill to promise.fulfill(user) or promise.fulfill(errors)
    // `errors` is an array of error message strings
    //
    // e.g., 
    // Example 1 - Sync Example
    // if (usersByLogin[login] && usersByLogin[login].password === password) {
    //   return usersByLogin[login];
    // } else {
    //   return ['Login failed'];
    // }
    //
    // Example 2 - Async Example
    // var promise = this.Promise()
    // YourUserModel.find({ login: login}, function (err, user) {
    //   if (err) return promise.fulfill([err]);
    //   promise.fulfill(user);
    // }
    // return promise;
  })
  .loginSuccessRedirect('/') // Where to redirect to after a login
  
    // If login fails, we render the errors via the login view template,
    // so just make sure your loginView() template incorporates an `errors` local.
    // See './example/views/login.jade'

  .getRegisterPath('/register') // Uri path to the registration page
  .postRegisterPath('/register') // The Uri path that your registration form POSTs to
  .registerView('a string of html; OR the name of the jade/etc-view-engine view')
  .validateRegistration( function (newUserAttributes) {
    // Validate the registration input
    // Return undefined, null, or [] if validation succeeds
    // Return an array of error messages (or Promise promising this array)
    // if validation fails
    //
    // e.g., assuming you define validate with the following signature
    // var errors = validate(login, password, extraParams);
    // return errors;
    //
    // The `errors` you return show up as an `errors` local in your jade template
  })
  .registerUser( function (newUserAttributes) {
    // This step is only executed if we pass the validateRegistration step without
    // any errors.
    //
    // Returns a user (or a Promise that promises a user) after adding it to
    // some user store.
    //
    // As an edge case, sometimes your database may make you aware of violation
    // of the unique login index, so if this error is sent back in an async
    // callback, then you can just return that error as a single element array
    // containing just that error message, and everyauth will automatically handle
    // that as a failed registration. Again, you will have access to this error via
    // the `errors` local in your register view jade template.
    // e.g.,
    // var promise = this.Promise();
    // User.create(newUserAttributes, function (err, user) {
    //   if (err) return promise.fulfill([err]);
    //   promise.fulfill(user);
    // });
    // return promise;
    //
    // Note: Index and db-driven validations are the only validations that occur 
    // here; all other validations occur in the `validateRegistration` step documented above.
  })
  .registerSuccessRedirect('/'); // Where to redirect to after a successful registration

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.password
  .loginFormFieldName('login')       // Defaults to 'login'
  .passwordFormFieldName('password') // Defaults to 'password'
  .loginLayout('custom_login_layout') // Only with `express`
  .registerLayout('custom reg_layout') // Only with `express`
  .loginLocals(fn);                    // See Recipe 3 below

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.password.loginFormFieldName();    // 'login'
everyauth.password.passwordFormFieldName(); // 'password'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.password.configurable();

Password Recipe 1: Extra registration data besides login + password

Sometimes your registration will ask for more information from the user besides the login and password.

For this particular scenario, you can configure the optional step, extractExtraRegistrationParams.

everyauth.password.extractExtraRegistrationParams( function (req) {
  return {
      phone: req.body.phone
    , name: {
          first: req.body.first_name
        , last: req.body.last_name
      }
  };
});

Password Recipe 2: Logging in with email or phone number

By default, everyauth uses the field and user key name login during the registration and login process.

Sometimes, you want to use email or phone instead of login. Moreover, you also want to validate email and phone fields upon registration.

everyauth provides an easy way to do this:

everyauth.password.loginWith('email');

// OR

everyauth.password.loginWith('phone');

With simple login configuration like this, you get email (or phone) validation in addition to renaming of the form field and user key corresponding to what otherwise would typically be referred to as 'login'.

Password Recipe 3: Adding additional view local variables to login and registration views

If you are using express, you are able to pass variables from your app context to your view context via local variables. everyauth provides several convenience local vars for your views, but sometimes you will want to augment this set of local vars with additional locals.

So everyauth also provides a mechanism for you to do so via the following configurables:

everyauth.password.loginLocals(...);
everyauth.password.registerLocals(...);

loginLocals and registerLocals configuration have symmetrical APIs, so I will only cover loginLocals here to illustrate how to use both.

You can configure this parameter in one of 3 ways. Why 3? Because there are 3 types of ways that you can retrieve your locals.

Static local vars that never change values:

```javascript
everyauth.password.loginLocals({
  title: 'Login'
});
```

Dynamic synchronous local vars that depend on the incoming request, but whose values are retrieved synchronously

```javascript
everyauth.password.loginLocals( function (req, res) {
  var sess = req.session;
  return {
    isReturning: sess.isReturning
  };
});
```

Dynamic asynchronous local vars

```javascript
everyauth.password.loginLocals( function (req, res, done) {
  asyncCall( function ( err, data) {
    if (err) return done(err);
    done(null, {
      title: il8n.titleInLanguage('Login Page', il8n.language(data.geo))
    });
  });
});
```

Password Recipe 4: Customize Your Registration Validation

By default, everyauth.password automatically

validates that the login (or email or phone, depending on what you authenticate with -- see Password Recipe 2) is present in the login http request,
validates that the password is present
validates that an email login is a correctly formatted email
validates that a phone login is a valid phone number

If any of these validations fail, then the appropriate errors are generated and accessible to you in your view via the errors view local variable.

If you want to add additional validations beyond this, you can do so by configuring the step, validateRegistration:

everyauth.password
  .validateRegistration( function (newUserAttributes, baseErrors) {
    // Here, newUserAttributes is the hash of parameters extracted from the incoming request.
    // baseErrors is the array of errors generated by the default automatic validation outlined above
    //   in this same recipe.

    // First, validate your errors. Here, validateUser is a made up function
    var moreErrors = validateUser( newUserAttributes );
    if (moreErrors.length) baseErrors.push.apply(baseErrors, moreErrors);

    // Return the array of errors, so your view has access to them.
    return baseErrors;
  });

Setting up GitHub OAuth

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.github
  .appId('YOUR CLIENT ID HERE')
  .appSecret('YOUR CLIENT SECRET HERE')
  .findOrCreateUser( function (session, accessToken, , accessTokenExtra, githubUserMetadata) {
    // find or create user logic goes here
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.github
  .entryPath('/auth/github')
  .callbackPath('/auth/github/callback')
  .scope('repo'); // Defaults to undefined
                  // Can be set to a combination of: 'user', 'public_repo', 'repo', 'gist'
                  // For more details, see http://develop.github.com/p/oauth.html

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.github.scope(); // undefined
everyauth.github.entryPath(); // '/auth/github'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.github.configurable();

Setting up Instagram OAuth

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.instagram
  .appId('YOUR CLIENT ID HERE')
  .appSecret('YOUR CLIENT SECRET HERE')
  .findOrCreateUser( function (session, accessToken, accessTokenExtra, instagramUserMetadata) {
    // find or create user logic goes here
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.instagram
  .entryPath('/auth/instagram')
  .callbackPath('/auth/instagram/callback')
  .scope('basic') // Defaults to 'basic'
                  // Can be set to a combination of: 'basic', 'comments', 'relationships', 'likes'
                  // For more details, see http://instagram.com/developer/auth/#scope
  .display(undefined); // Defaults to undefined; Set to 'touch' to see a mobile optimized version
                       // of the instagram auth page

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.instagram.callbackPath(); // '/auth/instagram/callback'
everyauth.instagram.entryPath(); // '/auth/instagram'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.instagram.configurable();

Setting up Foursquare OAuth

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.foursquare
  .appId('YOUR CLIENT ID HERE')
  .appSecret('YOUR CLIENT SECRET HERE')
  .findOrCreateUser( function (session, accessToken, accessTokenExtra, foursquareUserMetadata) {
    // find or create user logic goes here
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.foursquare
  .entryPath('/auth/foursquare')
  .callbackPath('/auth/foursquare/callback');

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.foursquare.callbackPath(); // '/auth/foursquare/callback'
everyauth.foursquare.entryPath(); // '/auth/foursquare'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.foursquare.configurable();

Setting up LinkedIn OAuth

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.linkedin
  .consumerKey('YOUR CONSUMER ID HERE')
  .consumerSecret('YOUR CONSUMER SECRET HERE')
  .findOrCreateUser( function (session, accessToken, accessTokenSecret, linkedinUserMetadata) {
    // find or create user logic goes here
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.linkedin
  .entryPath('/auth/linkedin')
  .callbackPath('/auth/linkedin/callback');

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.linkedin.callbackPath(); // '/auth/linkedin/callback'
everyauth.linkedin.entryPath(); // '/auth/linkedin'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.linkedin.configurable();

Setting up Google OAuth2

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.google
  .appId('YOUR CLIENT ID HERE')
  .appSecret('YOUR CLIENT SECRET HERE')
  .scope('https://www.google.com/m8/feeds') // What you want access to
  .handleAuthCallbackError( function (req, res) {
    // If a user denies your app, Google will redirect the user to
    // /auth/facebook/callback?error=access_denied
    // This configurable route handler defines how you want to respond to
    // that.
    // If you do not configure this, everyauth renders a default fallback
    // view notifying the user that their authentication failed and why.
  })
  .findOrCreateUser( function (session, accessToken, accessTokenExtra, fbUserMetadata) {
    // find or create user logic goes here
    // Return a user or Promise that promises a user
    // Promises are created via
    //     var promise = this.Promise();
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.google
  .entryPath('/auth/google')
  .callbackPath('/auth/google/callback');

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.google.scope(); // undefined
everyauth.google.entryPath(); // '/auth/google'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.google.configurable();

Setting up Yahoo OAuth

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.yahoo
  .consumerKey('YOUR CONSUMER KEY HERE')
  .consumerSecret('YOUR CONSUMER SECRET HERE')
  .findOrCreateUser( function (session, accessToken, accessTokenSecret, yahooUserMetadata) {
    // find or create user logic goes here
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.yahoo
  .entryPath('/auth/yahoo')
  .callbackPath('/auth/yahoo/callback');

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.yahoo.callbackPath(); // '/auth/yahoo/callback'
everyauth.yahoo.entryPath(); // '/auth/yahoo'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.yahoo.configurable();

Setting up Readability OAuth

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.readability
  .consumerKey('YOUR CONSUMER KEY HERE')
  .consumerSecret('YOUR CONSUMER SECRET HERE')
  .findOrCreateUser( function (sess, accessToken, accessSecret, reader) {
    // find or create user logic goes here
    //
    // e.g.,
    // return usersByReadabilityId[reader.username] || (usersByReadabilityId[reader.username] = reader);
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.readability
  .entryPath('/auth/readability')
  .callbackPath('/auth/readability/callback');

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.readability.callbackPath(); // '/auth/readability/callback'
everyauth.readability.entryPath(); // '/auth/readability'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.readability.configurable();

Setting up Dropbox OAuth

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.dropbox
  .consumerKey('YOUR CONSUMER KEY HERE')
  .consumerSecret('YOUR CONSUMER SECRET HERE')
  .findOrCreateUser( function (sess, accessToken, accessSecret, user) {
    // find or create user logic goes here
    //
    // e.g.,
    // return usersByDropboxId[user.uid] || (usersByDropboxId[user.uid] = user);
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.dropbox
  .entryPath('/auth/dropbox')
  .callbackPath('/auth/dropbox/callback');

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.dropbox.callbackPath(); // '/auth/dropbox/callback'
everyauth.dropbox.entryPath(); // '/auth/dropbox'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.dropbox.configurable();

Setting up Justin.tv OAuth

Sign up for a Justin.tv account and activate it as a developer account to get your consumer key and secret.

var everyauth = require('everyauth')
  , connect = require('connect');
  
everyauth.justintv
  .consumerKey('YOUR CONSUMER KEY HERE')
  .consumerSecret('YOUR CONSUMER SECRET HERE')
  .findOrCreateUser( function (sess, accessToken, accessSecret, justintvUser) {
    // find or create user logic goes here
    //
    // e.g.,
    // return usersByJustintvId[justintvUser.id] || (usersByJustintvId[justintvUser.id] = justintvUser);
  })
  .redirectPath('/');
  
var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

The justintvUser parameter in the .findOrCreateUser() function above returns the account/whoami API call

Justin.tv API Wiki - Account/whoami

{
   "image_url_huge": "http:\/\/static-cdn.justin.tv\/jtv_user_pictures\/justin-320x240-4.jpg",
   "profile_header_border_color": null,
   "favorite_quotes": "I love Justin.tv",
   "sex": "Male",
   "image_url_large": "http:\/\/static-cdn.justin.tv\/jtv_user_pictures\/justin-125x94-4.jpg",
   "profile_about": "Check out my website:\n\nwww.justin.tv\n",
   "profile_background_color": null,
   "image_url_medium": "http:\/\/static-cdn.justin.tv\/jtv_user_pictures\/justin-75x56-4.jpg",
   "id": 1698,
   "broadcaster": true,
   "profile_url": "http:\/\/www.justin.tv\/justin\/profile",
   "profile_link_color": null,
   "image_url_small": "http:\/\/static-cdn.justin.tv\/jtv_user_pictures\/justin-50x37-4.jpg",
   "profile_header_text_color": null,
   "name": "The JUST UN",
   "image_url_tiny": "http:\/\/static-cdn.justin.tv\/jtv_user_pictures\/justin-33x25-4.jpg",
   "login": "justin",
   "profile_header_bg_color": null,
   "location": "San Francisco"
}

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.justintv
  .entryPath('/auth/justintv')
  .callbackPath('/auth/justintv/callback');

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.justintv.callbackPath(); // '/auth/justintv/callback'
everyauth.justintv.entryPath(); // '/auth/justintv'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.justintv.configurable();

Setting up Vimeo OAuth

You will first need to sign up for a developer application to get the consumer key and secret.

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.vimeo
  .consumerKey('YOUR CONSUMER KEY HERE')
  .consumerSecret('YOUR CONSUMER SECRET HERE')
  .findOrCreateUser( function (sess, accessToken, accessSecret, user) {
    // find or create user logic goes here
    //
    // e.g.,
    // return usersByVimeoId[user.id] || (usersByVimeoId[user.id] = user);
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.vimeo
  .entryPath('/auth/vimeo')
  .callbackPath('/auth/vimeo/callback');

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.vimeo.callbackPath(); // '/auth/vimeo/callback'
everyauth.vimeo.entryPath(); // '/auth/vimeo'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.vimeo.configurable();

Setting up OpenID protocol

OpenID protocol allows you to use an openid auth request. You can read more information about it here http://openid.net/

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.openid
  .simpleRegistration({
      "nickname" : true
    , "email"    : true
    , "fullname" : true
    , "dob"      : true
    , "gender"   : true
    , "postcode" : true
    , "country"  : true
    , "language" : true
    , "timezone" : true
  })
	.attributeExchange({
      "http://axschema.org/contact/email"       : "required"
    , "http://axschema.org/namePerson/friendly" : "required"
    , "http://axschema.org/namePerson"          : "required"
    , "http://axschema.org/namePerson/first"    : "required"
    , "http://axschema.org/contact/country/home": "required"
    , "http://axschema.org/media/image/default" : "required"
    , "http://axschema.org/x/media/signature"   : "required"
  })
  .openidURLField('openid_identifier'); //The POST variable used to get the OpenID
  .findOrCreateUser( function(session, openIdUserAttributes) {
    // find or create user logic goes here
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

Setting up Google OpenID+OAuth Hybrid protocol

OpenID+OAuth Hybrid protocol allows you to combine an openid auth request with a oauth access request. You can read more information about it here http://code.google.com/apis/accounts/docs/OpenID.html

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.googlehybrid
  .consumerKey('YOUR CONSUMER ID HERE')
  .consumerSecret('YOUR CONSUMER SECRET HERE')
  .scope(['GOOGLE API SCOPE','GOOGLE API SCOPE'])
  .findOrCreateUser( function(session, userAttributes) {
    // find or create user logic goes here
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

Setting up Box.net Auth

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.box
  .apiKey('YOUR API KEY')
  .findOrCreateUser( function (sess, authToken, boxUser) {
    // find or create user logic goes here
    //
    // e.g.,
    // return usersByBoxId[user.user_id] || (usersByBoxId[user.user_id] = user);
  })
  .redirectPath('/');

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

You can also configure more parameters (most are set to defaults) via the same chainable API:

everyauth.box
  .entryPath('/auth/box')
  .callbackPath('/auth/box/callback');

If you want to see what the current value of a configured parameter is, you can do so via:

everyauth.box.callbackPath(); // '/auth/box/callback'
everyauth.box.entryPath(); // '/auth/box'

To see all parameters that are configurable, the following will return an object whose parameter name keys map to description values:

everyauth.box.configurable();

Setting up LDAP

The LDAP module is still in development. Do not use it in production yet.

Install OpenLDAP client libraries:

$ apt-get install slapd ldap-utils

Install node-ldapauth:

var everyauth = require('everyauth')
  , connect = require('connect');

everyauth.ldap
  .host('your.ldap.host')
  .port(389)

  // The `ldap` module inherits from the `password` module, so 
  // refer to the `password` module instructions several sections above
  // in this README.
  // You do not need to configure the `authenticate` step as instructed
  // by `password` because the `ldap` module already does that for you.
  // Moreover, all the registration related steps and configurable parameters
  // are no longer valid
  .getLoginPath(...)
  .postLoginPath(...)
  .loginView(...)
  .loginSuccessRedirect(...);

var routes = function (app) {
  // Define your routes here
};

connect(
    connect.bodyParser()
  , connect.cookieParser()
  , connect.session({secret: 'whodunnit'})
  , everyauth.middleware()
  , connect.router(routes);
).listen(3000);

Accessing the User

If you are using express or connect, then everyauth provides an easy way to access the user as:

req.user from your app server
everyauth.user via the everyauth helper accessible from your express views.
user as a helper accessible from your express views

To access the user, configure everyauth.everymodule.findUserById. For example, using mongoose:

everyauth.everymodule.findUserById( function (userId, callback) {
  User.findById(userId, callback);
  // callback has the signature, function (err, user) {...}
});

Once you have configured this method, you now have access to the user object that was fetched anywhere in your server app code as req.user. For instance:

var app = require('express').createServer()

// Configure your app

app.get('/', function (req, res) {
  console.log(req.user);  // FTW!
  res.render('home');
});

Moreover, you can access the user in your views as everyauth.user or as user.

//- Inside ./views/home.jade
span.user-id= everyauth.user.name
#user-id= user.id

Express Helpers

If you are using express, everyauth comes with some useful dynamic helpers. To enable them:

var express = require('express')
  , everyauth = require('everyauth')
  , app = express.createServer();

everyauth.helpExpress(app);

Then, from within your views, you will have access to the following helpers methods attached to the helper, everyauth:

everyauth.loggedIn
everyauth.user - the User document associated with the session
everyauth.facebook - The is equivalent to what is stored at req.session.auth.facebook, so you can do things like ...
everyauth.facebook.user - returns the user json provided from the OAuth provider.
everyauth.facebook.accessToken - returns the access_token provided from the OAuth provider for authorized API calls on behalf of the user.
And you also get this pattern for other modules - e.g., everyauth.twitter.user, everyauth.github.user, etc.

You also get access to the view helper

user - the same as everyauth.user above

As an example of how you would use these, consider the following ./views/user.jade jade template:

.user-id
  .label User Id
  .value #{user.id}
.facebook-id
  .label User Facebook Id
  .value #{everyauth.facebook.user.id}

everyauth also provides convenience methods on the ServerRequest instance req. From any scope that has access to req, you get the following convenience getters and methods:

req.loggedIn - a Boolean getter that tells you if the request is by a logged in user
req.user - the User document associated with the session
req.logout() - clears the sesion of your auth data

Configuring a Module

everyauth was built with powerful configuration needs in mind.

Every module comes with a set of parameters that you can configure directly. To see a list of those parameters on a per module basis, with descriptions about what they do, enter the following into the node REPL (to access the REPL, just type node at the command line)

> var ea = require('everyauth');
> ea.facebook.configurable();

For example, you will see that one of the configuration parameters is moduleTimeout, which is described to be how long to wait per step before timing out and invoking any timeout callbacks

Every configuration parameter corresponds to a method of the same name on the auth module under consideration (i.e., in this case ea.facebook). To create or over-write that parameter, just call that method with the new value as the argument:

ea.facebook
  .moduleTimeout( 4000 ); // Wait 4 seconds before timing out any step
                          // involved in the facebook auth process

Configuration parameters can be scalars. But they can be anything. For example, they can also be functions, too. The facebook module has a configurable step named findOrCreateUser that is described as "STEP FN [findOrCreateUser] function encapsulating the logic for the step fetchOAuthUser.". What this means is that this configures the function (i.e., "FN") that encapsulates the logic of this step.

ea.facebook
  .findOrCreateUser( function (session, accessToken, extra, oauthUser) {
    // find or create user logic goes here
  });

How do we know what arguments the function takes? We elaborate more about step function configuration in our Introspection section below.

Configuring Error Handling

By default, all modules handle errors by throwing them. That said, everyauth allows you to over-ride this behavior.

You can configure error handling at the module and step level. To handle all errors in the same manner across all auth modules that you use, do the following.

everyauth.everymodule.moduleErrback( function (err) {
  // Do something with the err -- e.g., log it, throw it
});

You can also configure your error handling on a per module basis. So, for example, if you want to handle errors during the Facebook module differently than in other modules:

everyauth.facebook.moduleErrback( function (err) {
  // Do something with the err -- e.g., log it, throw it
});

Introspection

everyauth provides convenient methods and getters for finding out about any module.

Show all configurable parameters with their descriptions:

everyauth.facebook.configurable();

Show the value of a single configurable parameter:

// Get the value of the configurable callbackPath parameter
everyauth.facebook.callbackPath(); // => '/auth/facebook/callback'

Show the declared routes (pretty printed):

everyauth.facebook.routes;

Show the steps initiated by a given route:

everyauth.facebook.route.get.entryPath.steps; 
everyauth.facebook.route.get.callbackPath.steps;

Sometimes you need to set up additional steps for a given auth module, by defining that step in your app. For example, the set of steps triggered when someone requests the facebook module's callbackPath contains a step that you must define in your app. To see what that step is, you can introspect the callbackPath route with the facebook module.

everyauth.facebook.route.get.callbackPath.steps.incomplete;
// => [ { name: 'findOrCreateUser',
//        error: 'is missing: its function' } ]

This tells you that you must define the function that defines the logic for the findOrCreateUser step. To see what the function signature looks like for this step:

var matchingStep =
everyauth.facebook.route.get.callbackPath.steps.filter( function (step) {
  return step.name === 'findOrCreateUser';
})[0];
// { name: 'findOrCreateUser',
//   accepts: [ 'session', 'accessToken', 'extra', 'oauthUser' ],
//   promises: [ 'user' ] }

This tells you that the function should take the following 4 arguments:

function (session, accessToken, extra, oauthUser) {
  ...
}

And that the function should return a user that is a user object or a Promise that promises a user object.

// For synchronous lookup situations, you can return a user
function (session, accessToken, extra, oauthUser) {
  ...
  return { id: 'some user id', username: 'some user name' };
}

// OR

// For asynchronous lookup situations, you must return a Promise that
// will be fulfilled with a user later on
function (session, accessToken, extra, oauthUser) {
  var promise = this.Promise();
  asyncFindUser( function (err, user) {
    if (err) return promise.fail(err);
    promise.fulfill(user);
  });
  return promise;
}

You add this function as the block for the step findOrCreateUser just like you configure any other configurable parameter in your auth module:

everyauth.facebook
  .findOrCreateUser( function (session, accessToken, extra, oauthUser) {
    // Logic goes here
  });

There are also several other introspection tools at your disposal:

For example, to show the submodules of an auth module by name:

everyauth.oauth2.submodules;

Other introspection tools to describe (explanations coming soon):

Invalid Steps

everyauth.facebook.routes.get.callbackPath.steps.invalid

Modules and Projects that use everyauth

Currently, the following module uses everyauth. If you are using everyauth in a project, app, or module, get in touch to get added to the list below:

mongoose-auth Authorization plugin for use with the node.js MongoDB orm.

Author

Brian Noguchi

Credits

Thanks to the following contributors for the following modules:

RocketLabs Development for contributing
- OpenId
- Google Hybrid
Andrew Mee
- OpenId
Alfred Nerstu
- Readability
Torgeir
- DropBox
slickplaid
- Justin.tv
- Vimeo

MIT License

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Name		Name	Last commit message	Last commit date
Latest commit History 307 Commits
example		example
lib		lib
test		test
.gitignore		.gitignore
Makefile		Makefile
README.md		README.md
index.js		index.js
package.json		package.json

andykram/everyauth

Folders and files

Latest commit

History

Repository files navigation

everyauth

Installation

Quick Start

Example Application

Tests

Logging Out

Setting up Facebook Connect

Dynamic Facebook Connect Scope

Setting up Twitter OAuth

Setting up Password Authentication

Password Recipe 1: Extra registration data besides login + password

Password Recipe 2: Logging in with email or phone number

Password Recipe 3: Adding additional view local variables to login and registration views

Password Recipe 4: Customize Your Registration Validation

Setting up GitHub OAuth

Setting up Instagram OAuth

Setting up Foursquare OAuth

Setting up LinkedIn OAuth

Setting up Google OAuth2

Setting up Yahoo OAuth

Setting up Readability OAuth

Setting up Dropbox OAuth

Setting up Justin.tv OAuth

Setting up Vimeo OAuth

Setting up OpenID protocol

Setting up Google OpenID+OAuth Hybrid protocol

Setting up Box.net Auth

Setting up LDAP

Accessing the User

Express Helpers

Configuring a Module

Configuring Error Handling

Introspection

Modules and Projects that use everyauth

Author

Credits

MIT License

About

Resources

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages