Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

contracts/hw.device-type: Update instructions for Orin flasher types #448

Merged
merged 4 commits into from
Dec 16, 2024
Merged

contracts/hw.device-type: Update instructions for Orin flasher types #448

Show file tree
Hide file tree
Changes from all commits
Commits
Show all changes
4 commits
Select commit Hold shift + click to select a range
79b1757
contracts/hw.device-type: Update instructions for Orin flasher types
acostach Dec 5, 2024
bc18b77
hw.device-type: Mention v6.1.16 as cut-off version for direct provisi…
acostach Dec 5, 2024
e28d75c
hw.device-type/jetson-agx-orin-devkit-64gb: Clarify when manual boot …
acostach Dec 7, 2024
ec076bf
Reword provisioning instructions
acostach Dec 13, 2024
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
11 changes: 7 additions & 4 deletions contracts/hw.device-type/jetson-agx-orin-devkit-64gb/contract.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -28,12 +28,15 @@
"is_private": false
},
"partials": {
"instructions": [
"For balenaOS versions v6.1.16 and newer, please ensure your device is running UEFI firmware version 36.3. Check and update the <a href=\"https://docs.balena.io/learn/develop/hardware/jetson-orin#provisioning-jetson-orin\">firmware version</a> before proceeding.",
"For balenaOS versions older than v6.1.16, please refer to the <a href=\"https://github.com/balena-os/jetson-flash?tab=readme-ov-file\">{{name}} legacy flashing</a> guide."
],
"bootDeviceExternal": [
"Put the device in <a href=\"https://github.com/balena-os/jetson-flash#recovery-mode\">force recovery</a> mode.",
"Connect the USB-C data port of the Devkit to the Host PC.",
"Boot the device from the inserted USB Key by following the <a href=\"https://github.com/balena-os/jetson-flash#agx-orin-devkit-64gb-flashing\">AGX Orin Devkit 64GB flashing steps</a>."
"Power on the {{name}}.",
"NOTE: Only If your device is already flashed with a balenaOS version older than v6.1.16, power it on and interrupt booting by pressing the 'Esc' key when prompted by the UEFI firmware. Enter the Boot Manager Menu of the UEFI firmware and select the attached USB key as boot media, to trigger the provisioning process."
Copy link
Member

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Suggested change
"NOTE: Only If your device is already flashed with a balenaOS version older than v6.1.16, power it on and interrupt booting by pressing the 'Esc' key when prompted by the UEFI firmware. Enter the Boot Manager Menu of the UEFI firmware and select the attached USB key as boot media, to trigger the provisioning process."
"Note: Only if your device is already flashed with a balenaOS version older than v6.1.16, power it on and interrupt booting by pressing the 'Esc' key when prompted by the UEFI firmware. Enter the Boot Manager Menu of the UEFI firmware and select the attached USB key as boot media, to trigger the provisioning process."

NIT

],
"flashIndicator": ["power LED is off"],
"bootDevice": ["Power up the {{name}}"]
"bootDevice": ["Power up the {{name}}. A progress bar will show up on the display while the UEFI firmware is updated. Please do not interrupt this process by turning off power or rebooting the device."]
}
}
10 changes: 6 additions & 4 deletions contracts/hw.device-type/jetson-orin-nano-devkit-nvme/contract.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -28,12 +28,14 @@
"is_private": false
},
"partials": {
"instructions": [
"For balenaOS versions v6.1.16 and newer, please ensure your device is running UEFI firmware version 36.3. Check and update the <a href=\"https://docs.balena.io/learn/develop/hardware/jetson-orin#provisioning-jetson-orin\">firmware version</a> before proceeding.",
"For balenaOS versions older than v6.1.16, please refer to the <a href=\"https://github.com/balena-os/jetson-flash?tab=readme-ov-file\">{{name}} legacy flashing</a> guide."
],
"bootDeviceExternal": [
"Insert a NVME drive in the carrier board and put the device in <a href=\"https://github.com/balena-os/jetson-flash#recovery-mode\">force recovery</a> mode.",
"Connect the USB-C port of the carrier board to the Host PC.",
"RCM boot the balenaOS kernel following the <a href=\"https://github.com/balena-os/jetson-flash#orin-nano-flashing\">Orin Nano Flashing steps</a>."
"Insert a NVME drive in the Devkit and power up the {{name}}."
],
"flashIndicator": ["power LED is off"],
"bootDevice": ["Remove recovery mode jumper and power up the {{name}}"]
"bootDevice": ["Power up the {{name}}. If you have a display or a debug UART cable connected to the device, a progress bar will show up while the UEFI firmware is updated. Please do not interrupt this process by turning off power or rebooting the device."]
}
}
10 changes: 6 additions & 4 deletions contracts/hw.device-type/jetson-orin-nano-seeed-j3010/contract.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -28,12 +28,14 @@
"is_private": false
},
"partials": {
"instructions": [
"For balenaOS versions v6.1.16 and newer, please ensure your device is running UEFI firmware version 36.3. Check and update the <a href=\"https://docs.balena.io/learn/develop/hardware/jetson-orin#provisioning-jetson-orin\">firmware version</a> before proceeding.",
"For balenaOS versions older than v6.1.16, please refer to the <a href=\"https://github.com/balena-os/jetson-flash?tab=readme-ov-file\">{{name}} legacy flashing</a> guide."
],
"bootDeviceExternal": [
"Put the device in <a href=\"https://github.com/balena-os/jetson-flash#recovery-mode\">force recovery</a> mode.",
"Connect the USB-C port of the carrier board to the Host PC.",
"RCM boot the balenaOS kernel following the <a href=\"https://github.com/balena-os/jetson-flash#seeed-recomputer-j3010-flashing\">Seeed reComputer J3010 Flashing steps</a>."
"Insert a NVME drive in the Devkit and power up the {{name}}"
],
"flashIndicator": ["power LED is off"],
"bootDevice": ["Remove recovery mode jumper and power up the {{name}}"]
"bootDevice": ["Power up the {{name}}. If you have a display or a debug UART cable connected to the device, a progress bar will show up while the UEFI firmware is updated. Please do not interrupt this process by turning off power or rebooting the device."]
}
}
10 changes: 6 additions & 4 deletions contracts/hw.device-type/jetson-orin-nx-seeed-j4012/contract.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -28,12 +28,14 @@
"is_private": false
},
"partials": {
"instructions": [
"For balenaOS versions v6.1.16 and newer, please ensure your device is running UEFI firmware version 36.3. Check and update the <a href=\"https://docs.balena.io/learn/develop/hardware/jetson-orin#provisioning-jetson-orin\">firmware version</a> before proceeding.",
"For balenaOS versions older than v6.1.16, please refer to the <a href=\"https://github.com/balena-os/jetson-flash?tab=readme-ov-file\">{{name}} legacy flashing</a> guide."
],
"bootDeviceExternal": [
"Put the device in <a href=\"https://github.com/balena-os/jetson-flash#recovery-mode\">force recovery</a> mode.",
"Connect the USB-C port of the carrier board to the Host PC.",
"RCM boot the balenaOS kernel following the <a href=\"https://github.com/balena-os/jetson-flash#seeed-recomputer-j4012-flashing\">Seeed reComputer J4012 Flashing steps</a>."
"Insert a NVME drive in the Devkit and power up the {{name}}."
],
"flashIndicator": ["power LED is off"],
"bootDevice": ["Remove recovery mode jumper and power up the {{name}}"]
"bootDevice": ["Power up the {{name}}. If you have a display or a debug UART cable connected to the device, a progress bar will show up while the UEFI firmware is updated. Please do not interrupt this process by turning off power or rebooting the device."]
}
}
10 changes: 6 additions & 4 deletions contracts/hw.device-type/jetson-orin-nx-xavier-nx-devkit/contract.json
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -28,12 +28,14 @@
"is_private": false
},
"partials": {
"instructions": [
"For balenaOS versions v6.1.16 and newer, please ensure your device is running UEFI firmware version 36.3. Check and update the <a href=\"https://docs.balena.io/learn/develop/hardware/jetson-orin#provisioning-jetson-orin\">firmware version</a> before proceeding.",
"For balenaOS versions older than v6.1.16, please refer to the <a href=\"https://github.com/balena-os/jetson-flash?tab=readme-ov-file\">{{name}} legacy flashing</a> guide."
],
"bootDeviceExternal": [
"Insert a NVME drive in the carrier board and put the device in <a href=\"https://github.com/balena-os/jetson-flash#recovery-mode\">force recovery</a> mode.",
"Connect the micro-USB port of the carrier board to the Host PC.",
"RCM boot the balenaOS kernel following the <a href=\"https://github.com/balena-os/jetson-flash#orin-nx-flashing\">Orin NX Flashing steps</a>."
"Insert a NVME drive in the Devkit and power up the {{name}}."
],
"flashIndicator": ["power LED is off"],
"bootDevice": ["Remove recovery mode jumper and power up the {{name}}"]
"bootDevice": ["Power up the {{name}}. A progress bar will show up on the display while the UEFI firmware is updated. Please do not interrupt this process by turning off power or rebooting the device."]
}
}
Loading