Translations update from Hosted Weblate #1642
weblateAnnotations
1 error, 27 warnings, and 54 notices
|
Run pytest (3.11, dev)
Process completed with exit code 1.
|
|
Run pytest (3.10, 2023.4.6)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Run pytest (3.10, 2023.4.6)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Run pytest (3.10, 2023.4.6)
### WARNING! Deprecation warnings muted with option '--use-pep517' please address this at some point in pytest.yaml. ###
|
|
Run pytest (3.11, dev)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Run pytest (3.11, dev)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Run pytest (3.11, dev)
### WARNING! Deprecation warnings muted with option '--use-pep517' please address this at some point in pytest.yaml. ###
|
|
Run pytest (3.10, 2023.3.6)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Run pytest (3.10, 2023.3.6)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Run pytest (3.10, 2023.3.6)
### WARNING! Deprecation warnings muted with option '--use-pep517' please address this at some point in pytest.yaml. ###
|
|
Run pytest (3.10, 2023.5.2)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Run pytest (3.10, 2023.5.2)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Run pytest (3.10, 2023.5.2)
### WARNING! Deprecation warnings muted with option '--use-pep517' please address this at some point in pytest.yaml. ###
|
|
Run pytest (3.10, 2023.2.5)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Run pytest (3.10, 2023.2.5)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Run pytest (3.10, 2023.2.5)
### WARNING! Deprecation warnings muted with option '--use-pep517' please address this at some point in pytest.yaml. ###
|
|
Run pytest (3.10, 2022.11.5)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Run pytest (3.10, 2022.11.5)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Run pytest (3.10, 2022.11.5)
### WARNING! Deprecation warnings muted with option '--use-pep517' please address this at some point in pytest.yaml. ###
|
|
Run pytest (3.10, 2022.12.9)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Run pytest (3.10, 2022.12.9)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Run pytest (3.10, 2022.12.9)
### WARNING! Deprecation warnings muted with option '--use-pep517' please address this at some point in pytest.yaml. ###
|
|
Run pytest (3.10, 2023.1.7)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Run pytest (3.10, 2023.1.7)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Run pytest (3.10, 2023.1.7)
### WARNING! Deprecation warnings muted with option '--use-pep517' please address this at some point in pytest.yaml. ###
|
|
Run pytest (3.11, 2023.6.1)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Run pytest (3.11, 2023.6.1)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
Run pytest (3.11, 2023.6.1)
### WARNING! Deprecation warnings muted with option '--use-pep517' please address this at some point in pytest.yaml. ###
|
|
Run pytest (3.10, 2023.4.6)
### If tests fail, try these debug steps: ###
|
|
Run pytest (3.10, 2023.4.6)
### 1. Replace '-qq' from .github/workflow/pytest.yaml. with '-v' for extra verbosity. ###
|
|
Run pytest (3.10, 2023.4.6)
### 2. Push or run action again. ###
|
|
Run pytest (3.10, 2023.4.6)
### 3. Check for any log messages in github actions resembling the following using CTRL+F ###
|
|
Run pytest (3.10, 2023.4.6)
### 5. add 'component'.'module' (without the '') from the above log into the 'required' list inside of 'test_dependencies.py' ###
|
|
Run pytest (3.10, 2023.4.6)
### 6. Try again! If more issues persist they should be easily solvable by reading the verbose logs now. ###
|
|
Run pytest (3.11, dev)
### If tests fail, try these debug steps: ###
|
|
Run pytest (3.11, dev)
### 1. Replace '-qq' from .github/workflow/pytest.yaml. with '-v' for extra verbosity. ###
|
|
Run pytest (3.11, dev)
### 2. Push or run action again. ###
|
|
Run pytest (3.11, dev)
### 3. Check for any log messages in github actions resembling the following using CTRL+F ###
|
|
Run pytest (3.11, dev)
### 5. add 'component'.'module' (without the '') from the above log into the 'required' list inside of 'test_dependencies.py' ###
|
|
Run pytest (3.11, dev)
### 6. Try again! If more issues persist they should be easily solvable by reading the verbose logs now. ###
|
|
Run pytest (3.10, 2023.3.6)
### If tests fail, try these debug steps: ###
|
|
Run pytest (3.10, 2023.3.6)
### 1. Replace '-qq' from .github/workflow/pytest.yaml. with '-v' for extra verbosity. ###
|
|
Run pytest (3.10, 2023.3.6)
### 2. Push or run action again. ###
|
|
Run pytest (3.10, 2023.3.6)
### 3. Check for any log messages in github actions resembling the following using CTRL+F ###
|
|
Run pytest (3.10, 2023.3.6)
### 5. add 'component'.'module' (without the '') from the above log into the 'required' list inside of 'test_dependencies.py' ###
|
|
Run pytest (3.10, 2023.3.6)
### 6. Try again! If more issues persist they should be easily solvable by reading the verbose logs now. ###
|
|
Run pytest (3.10, 2023.5.2)
### If tests fail, try these debug steps: ###
|
|
Run pytest (3.10, 2023.5.2)
### 1. Replace '-qq' from .github/workflow/pytest.yaml. with '-v' for extra verbosity. ###
|
|
Run pytest (3.10, 2023.5.2)
### 2. Push or run action again. ###
|
|
Run pytest (3.10, 2023.5.2)
### 3. Check for any log messages in github actions resembling the following using CTRL+F ###
|
|
Run pytest (3.10, 2023.5.2)
### 5. add 'component'.'module' (without the '') from the above log into the 'required' list inside of 'test_dependencies.py' ###
|
|
Run pytest (3.10, 2023.5.2)
### 6. Try again! If more issues persist they should be easily solvable by reading the verbose logs now. ###
|
|
Run pytest (3.10, 2023.2.5)
### If tests fail, try these debug steps: ###
|
|
Run pytest (3.10, 2023.2.5)
### 1. Replace '-qq' from .github/workflow/pytest.yaml. with '-v' for extra verbosity. ###
|
|
Run pytest (3.10, 2023.2.5)
### 2. Push or run action again. ###
|
|
Run pytest (3.10, 2023.2.5)
### 3. Check for any log messages in github actions resembling the following using CTRL+F ###
|
|
Run pytest (3.10, 2023.2.5)
### 5. add 'component'.'module' (without the '') from the above log into the 'required' list inside of 'test_dependencies.py' ###
|
|
Run pytest (3.10, 2023.2.5)
### 6. Try again! If more issues persist they should be easily solvable by reading the verbose logs now. ###
|
|
Run pytest (3.10, 2022.11.5)
### If tests fail, try these debug steps: ###
|
|
Run pytest (3.10, 2022.11.5)
### 1. Replace '-qq' from .github/workflow/pytest.yaml. with '-v' for extra verbosity. ###
|
|
Run pytest (3.10, 2022.11.5)
### 2. Push or run action again. ###
|
|
Run pytest (3.10, 2022.11.5)
### 3. Check for any log messages in github actions resembling the following using CTRL+F ###
|
|
Run pytest (3.10, 2022.11.5)
### 5. add 'component'.'module' (without the '') from the above log into the 'required' list inside of 'test_dependencies.py' ###
|
|
Run pytest (3.10, 2022.11.5)
### 6. Try again! If more issues persist they should be easily solvable by reading the verbose logs now. ###
|
|
Run pytest (3.10, 2022.12.9)
### If tests fail, try these debug steps: ###
|
|
Run pytest (3.10, 2022.12.9)
### 1. Replace '-qq' from .github/workflow/pytest.yaml. with '-v' for extra verbosity. ###
|
|
Run pytest (3.10, 2022.12.9)
### 2. Push or run action again. ###
|
|
Run pytest (3.10, 2022.12.9)
### 3. Check for any log messages in github actions resembling the following using CTRL+F ###
|
|
Run pytest (3.10, 2022.12.9)
### 5. add 'component'.'module' (without the '') from the above log into the 'required' list inside of 'test_dependencies.py' ###
|
|
Run pytest (3.10, 2022.12.9)
### 6. Try again! If more issues persist they should be easily solvable by reading the verbose logs now. ###
|
|
Run pytest (3.10, 2023.1.7)
### If tests fail, try these debug steps: ###
|
|
Run pytest (3.10, 2023.1.7)
### 1. Replace '-qq' from .github/workflow/pytest.yaml. with '-v' for extra verbosity. ###
|
|
Run pytest (3.10, 2023.1.7)
### 2. Push or run action again. ###
|
|
Run pytest (3.10, 2023.1.7)
### 3. Check for any log messages in github actions resembling the following using CTRL+F ###
|
|
Run pytest (3.10, 2023.1.7)
### 5. add 'component'.'module' (without the '') from the above log into the 'required' list inside of 'test_dependencies.py' ###
|
|
Run pytest (3.10, 2023.1.7)
### 6. Try again! If more issues persist they should be easily solvable by reading the verbose logs now. ###
|
|
Run pytest (3.11, 2023.6.1)
### If tests fail, try these debug steps: ###
|
|
Run pytest (3.11, 2023.6.1)
### 1. Replace '-qq' from .github/workflow/pytest.yaml. with '-v' for extra verbosity. ###
|
|
Run pytest (3.11, 2023.6.1)
### 2. Push or run action again. ###
|
|
Run pytest (3.11, 2023.6.1)
### 3. Check for any log messages in github actions resembling the following using CTRL+F ###
|
|
Run pytest (3.11, 2023.6.1)
### 5. add 'component'.'module' (without the '') from the above log into the 'required' list inside of 'test_dependencies.py' ###
|
|
Run pytest (3.11, 2023.6.1)
### 6. Try again! If more issues persist they should be easily solvable by reading the verbose logs now. ###
|