pre-make gifs so github doesn't time out

docs/src/DuctAPE/visualization.md

@@ -11,255 +11,14 @@ DuctAPE.generate_plots
 using DuctAPE
 include("../assets/plots_default.jl")
 gr()
-
-duct_coordinates = [
-    0.304466 0.158439
-    0.294972 0.158441
-    0.28113 0.158423
-    0.266505 0.158365
-    0.251898 0.158254
-    0.237332 0.158088
-    0.222751 0.157864
-    0.208123 0.157586
-    0.193399 0.157258
-    0.178507 0.156897
-    0.16349 0.156523
-    0.148679 0.156177
-    0.134222 0.155902
-    0.12 0.155721
-    0.106044 0.155585
-    0.092531 0.155498
-    0.079836 0.155546
-    0.067995 0.155792
-    0.057025 0.156294
-    0.046983 0.157103
-    0.037937 0.158256
-    0.029956 0.159771
-    0.02311 0.161648
-    0.017419 0.163862
-    0.012842 0.166404
-    0.009324 0.169289
-    0.006854 0.172546
-    0.005484 0.176154
-    0.005242 0.180005
-    0.006112 0.184067
-    0.00809 0.188086
-    0.011135 0.192004
-    0.015227 0.19579
-    0.020339 0.199393
-    0.026403 0.202735
-    0.033312 0.205736
-    0.040949 0.208332
-    0.049193 0.210487
-    0.057935 0.212174
-    0.067113 0.21339
-    0.076647 0.214136
-    0.086499 0.214421
-    0.09661 0.214255
-    0.10695 0.213649
-    0.117508 0.212618
-    0.12838 0.211153
-    0.139859 0.209267
-    0.151644 0.207051
-    0.163586 0.204547
-    0.175647 0.201771
-    0.187807 0.198746
-    0.20002 0.19549
-    0.212269 0.192017
-    0.224549 0.188335
-    0.236794 0.18447
-    0.249026 0.180416
-    0.261206 0.176188
-    0.273301 0.171796
-    0.28524 0.16727
-    0.29644 0.162842
-    0.304542 0.159526
-]
-
-centerbody_coordinates = [
-    0.0 0.0
-    0.000586 0.005293
-    0.002179 0.010047
-    0.004736 0.014551
-    0.008231 0.018825
-    0.012632 0.022848
-    0.01788 0.026585
-    0.023901 0.030001
-    0.030604 0.033068
-    0.0379 0.035771
-    0.045705 0.038107
-    0.053933 0.040075
-    0.06254 0.04169
-    0.071451 0.042966
-    0.08063 0.043916
-    0.090039 0.044561
-    0.09968 0.044922
-    0.109361 0.044999
-    0.12 0.044952
-    0.135773 0.04495
-    0.151899 0.04493
-    0.16806 0.044913
-    0.184232 0.044898
-    0.200407 0.044882
-    0.21658 0.044866
-    0.232723 0.044847
-    0.248578 0.044839
-    0.262095 0.044564
-    0.274184 0.043576
-    0.285768 0.041795
-    0.296701 0.039168
-    0.306379 0.035928
-]
-
-# number of rotors
-B = 5
-
-# rotor axial location
-rotorzloc = 0.12
-
-# rotor tip radius
-Rtip = 0.15572081487373543
-
-# rotor hub radius
-Rhub = 0.04495252299071941
-
-# non-dimensional blade element radial stations
-r = [
-    0.050491
-    0.061567
-    0.072644
-    0.083721
-    0.094798
-    0.10587
-    0.11695
-    0.12803
-    0.13911
-    0.15018
-] ./ Rtip
-
-# dimensional chord lengths
-chords = [
-    0.089142
-    0.079785
-    0.0713
-    0.063979
-    0.057777
-    0.052541
-    0.048103
-    0.044316
-    0.041061
-    0.038243
-]
-
-# twist angles (from plane of rotation) in radians
-twists = [
-    69.012
-    59.142
-    51.825
-    46.272
-    41.952
-    38.509
-    35.699
-    33.354
-    31.349
-    29.596
-] .* pi / 180.0
-
-# DFDC-type airfoil object
-afparams = DuctAPE.c4b.DFDCairfoil(;
-    alpha0=0.0,
-    clmax=1.5,
-    clmin=-1.0,
-    dclda=6.28,
-    dclda_stall=0.5,
-    dcl_stall=0.2,
-    cdmin=0.012,
-    clcdmin=0.1,
-    dcddcl2=0.005,
-    cmcon=0.0,
-    Re_ref=2e5,
-    Re_exp=0.35,
-    mcrit=0.7,
-)
-
-# all airfoils are the same
-airfoils = fill(afparams, length(r)) # specify the airfoil array
-
-# assemble rotor parameters
-rotor = DuctAPE.Rotor(
-    [B],
-    [rotorzloc],
-    r,
-    [Rhub],
-    [Rtip],
-    chords,
-    twists,
-    [0.0], # currently only zero tip gaps work.
-    airfoils,
-    [0.0], # can flip the cl lookups on the fly if desired, say, for stator sections
-)
-
-# number of panels for the duct inlet
-nduct_inlet = 30
-
-# number of panels for the center body inlet
-ncenterbody_inlet = 30
-
-# number of panels from:
-#  - rotor to duct trailing edge
-#  - duct trailing edge to center body trailing edge
-#  - center body trailing edge to end of wake
-npanels = [30, 1, 30]
-
-# the duct trailing edge is ahead of the centerbody trailing edge.
-dte_minus_cbte = -1.0
-
-# number of wake sheets (one more than blade elements to use)
-nwake_sheets = 11
-
-# non-dimensional wake length aft of rear-most trailing edge
-wake_length = 0.8
-
-# assemble paneling constants
-paneling_constants = DuctAPE.PanelingConstants(
-    nduct_inlet, ncenterbody_inlet, npanels, dte_minus_cbte, nwake_sheets, wake_length
-)
-
-# assemble ducted_rotor object
-ducted_rotor = DuctAPE.DuctedRotor(
-    duct_coordinates, centerbody_coordinates, rotor, paneling_constants
-)
-
-# Freestream
-Vinf = 0.0 # hover condition
-rhoinf = 1.226
-asound = 340.0
-muinf = 1.78e-5
-
-# Rotation Rate
-RPM = 8000.0
-Omega = RPM * pi / 30 # if using RPM, be sure to convert to rad/s
-
-# utilizing the constructor function to put things in vector types
-operating_point = DuctAPE.OperatingPoint(Vinf, rhoinf, muinf, asound, Omega)
-
-# reference velocity (close to average axial velocity at rotor in this case)
-Vref = 50.0
-
-# reference radius (usually tip radius of rotor)
-Rref = Rtip
-
-# assemble reference parameters
-reference_parameters = DuctAPE.ReferenceParameters([Vref], [Rref])
-
 ```
 
 The following generates animations across the given advance ratios.
 
 !!! warning "Plotting Streamlines"
     Currently, plotting streamlines, especially animations, takes an exceptionally long time.
 
-```@example visualize
+```@julia
 using Plots
 
 # - Advance Ratio Range - #
@@ -303,7 +62,7 @@ DuctAPE.generate_plots(
     static_file_type=".png",
     (;
         custom_defaults...,
-        size=(600, 400),
+        # size=(600,400), # causes misalignment issues
         cp_ylim=(-3, 3), # keyword argument to set ylim for cp plots
         vtan_ylim=(0, 3), # keyword argument to set ylim for vtan plots
         bl_ylim=(0.1, 0.25), # keyword argument to set ylim for boundary layer plots
@@ -313,7 +72,10 @@ nothing # hide
 ```
 
 !!! note "Custom Defaults"
-    Additional arguments splatted into `generate_plots` are passed into `Plots.plot` directly as keyword arguments.  In this case, `custom_defaults` happens to be the defaults associated with the plot formatting used in these docs.
+    Additional arguments splatted into `generate_plots` are passed into `Plots.plot` directly as keyword arguments.  In this case, `custom_defaults` happens to be the defaults associated with the plot formatting used in these docs.  Any arguments passed in this way will override any options set in the plots recipes for all the plots.  In the plots shown here, we have overridden the color palatte, but nothing else.
+
+!!! warning "Custom Sizes"
+    For some reason, specifying figure size causes misalignment with pressure and velocity distributions and the underlayed geometry.
 
 ![](../assets/geometry.png)
 ![](../assets/surface_pressure.gif)