Home
- Go to JLCPCB and click on "QUOTE NOW".
- Click "Add your gerber file" and upload the roxie.zip file from the gerber folder of this repository. You should now see the PCB board front and back being loaded.
- All standard options are fine. Just select the required quantity (min is 5), save to the cart and finish ordering. I received my board in less then 2 weeks.
Order an Arduino Nano Every from your local electronics shop or on the internet. This Arduino can be programmed with a micro-USB cable.
The screen you need to order is a 2.0 inch TFT with a resolution of 176 * 220 pixels and a ILI9225 driver, you can order it on Aliexpress, for example here.
Solder the Arduino and the screen to the board. It should look like this:
Insctructions for programming the Arduino can be found here.
Connect the Roxie display to a VESC compatible controller. If the connections are correct the screen will show the telemetrics from the VESC like this:
