Skip to content

Latest commit

 

History

History
56 lines (47 loc) · 2.26 KB

bareos-sample-Cheatsheet.md

File metadata and controls

56 lines (47 loc) · 2.26 KB
Raw

eb8's BareOS install Cheatsheet

This is based on an armbian based OpenMediaVault Installation, but should work on any Debian Stretch or newer.

Prerequisites

Minimum Setup for OMV:

  1. Change WEB-Admin Password
  2. Enable NTP
  3. Setup Hostname & Domain
  4. Setup Network-Interface
  5. Setup eMail-Notifications in OMV: the install script sends the installation Protocol & a tarball of /etc/bareos upon completion.
  6. Create a Backup-Partiton on the RAID/Disk with label backup and mount it.
  7. Enable SSH root login.
  8. SSH to the server as root with the Password "openmediavault", change the root password passwd
  9. and run ./run-once.sh [hostname] (on Armbian/OMV only).

Install the BareOS Server

This installes the BareOS-Server with WebUI and a set of Sample-Configs ready to be used with Clients, which are installed in the next step.

git clone https://github.com/chymian/bareos.git
cd bareos
./install.sh

During Installation of the PostGreSQL, you get asked some Questions:
Use the Defaults, note down your DB-password.

Install Clients

./install-client.sh -h
usage: install-client.sh [options] <clientname>
Setup a Job for client with the defaults JobDef: DefaultJob and FileSet: LinuxAll.
clientname can be a resolvable Hostname or an IP-Address.

   -c           Use "Client initiated Connections" for "not always on hosts", like Laptops, VM, etc.
   -f <fileset> Use FileSet <fileset> instead of Default FileSet
   -h           Show this message.
   -j <jobdef>  Use Jobdef <jobdef> instead of Default JobDef
   -l           List all available JobDefs and FileSets
   -m           Mail the updated Config-Docu and config-tarball (use as sole switch)
   -s           Setup Bareos-Client SW on the client & copy Director-definition to it. (needs ssh-access)

Docu & config-Tarball are not automatically updated.
Use "-m" on it's own at the end of your Setups to mail you the updated configs.

./install-client.sh -s -c -j DefaultJob-Hourly strepl
Configures the Client "strepl" on the Bareos-Director with the Hourly Jobdef and installes the bareos-client Software on the Client and configuring it. Ready to go.

Change BackupTime

  • defaults to 16:00
TIME="13:00"
sed -i "s/at ..:../at $TIME/g" /etc/bareos/bareos-dir.d/schedule/*