Skip to content

coreyker/fates3d_case

Repository files navigation

Fates 3d case

Fates3d

What this is:

  • This is a 3d printed case for "fates" designed in fusion 360
  • It has built in standoffs and supports so you don't need to purchase any extra
  • The case more or less snaps together

What is missing:

  • No consideration was given to cooling/air flow
  • There is no USB-C slot at the back of the case
  • There no hole for the 4th encoder
  • (the above two items were added thanks to james everitt)

Before you print this please know that:

  • This is not perfect
  • I'd recommend getting it printed by a friend with a 3d printer, or at a local hackerspace instead of spending a lot of money getting it printed using an online service
  • The tolerances are really tight. Once you install your Rpi + fates shield it will be a little difficult to remove. You might need a little spudger/pry tools to remove it

Licence

  • Creative Commons: Attribution-NonCommercial-ShareAlike 4.0 International
  • In other words: you cannot sell this, and if you modify the design you cannot sell that either. Otherwise do whatever your heart desires

About

No description, website, or topics provided.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Contributors 3

  •  
  •  
  •