Adds a Minimum Code Matter Example

libraries/Matter/examples/MatterMinimum/MatterMinimum.ino

@@ -0,0 +1,80 @@
+// Copyright 2024 Espressif Systems (Shanghai) PTE LTD
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+/*
+ * This example is the smallest code that will create a Matter Device which can be
+ * commissioned and controlled from a Matter Environment APP.
+ * It controls a GPIO that may be used as LED, additionally the ESP32 will send debug messages indicating the Matter activity.
+ * Turning DEBUG Level may be useful to follow Matter Accessory and Controller messages.
+ */
+
+// Matter Manager
+#include <Matter.h>
+#include <WiFi.h>
+
+// List of Matter Endpoints for this Node
+// Single On/Off Light Endpoint - at least one per node
+MatterOnOffLight OnOffLight;
+
+// Light GPIO that can be controlled by Matter APP
+#ifdef LED_BUILTIN
+const uint8_t ledPin = LED_BUILTIN;
+#else
+const uint8_t ledPin = 2;  // Set your pin here if your board has not defined LED_BUILTIN
+#endif
+
+// Matter Protocol Endpoint (On/OFF Light) Callback
+bool matterCB(bool state) {
+  digitalWrite(ledPin, state ? HIGH : LOW);
+  // This callback must return the success state to Matter core
+  return true;
+}
+
+// WiFi is manually set and started
+const char *ssid = "your-ssid";          // Change this to your WiFi SSID
+const char *password = "your-password";  // Change this to your WiFi password
+
+void setup() {
+  // Initialise the LED GPIO
+  pinMode(ledPin, OUTPUT);
+
+  WiFi.enableIPv6(true);
+  // Manually connect to WiFi
+  WiFi.begin(ssid, password);
+  // Wait for connection
+  while (WiFi.status() != WL_CONNECTED) {
+    delay(500);
+  }
+
+  // Initialize at least one Matter EndPoint
+  OnOffLight.begin();
+
+  // Associate a callback to the Matter Controller
+  OnOffLight.onChange(matterCB);
+
+  // Matter beginning - Last step, after all EndPoints are initialized
+  Matter.begin();
+
+  if (!Matter.isDeviceCommissioned()) {
+    log_i("Matter Node is not commissioned yet.");
+    log_i("Initiate the device discovery in your Matter environment.");
+    log_i("Commission it to your Matter hub with the manual pairing code or QR code");
+    log_i("Manual pairing code: %s\r\n", Matter.getManualPairingCode().c_str());
+    log_i("QR code URL: %s\r\n", Matter.getOnboardingQRCodeUrl().c_str());
+  }
+}
+
+void loop() {
+  delay(500);
+}

libraries/Matter/examples/MatterMinimum/ci.json

@@ -0,0 +1,7 @@
+{
+  "fqbn_append": "PartitionScheme=huge_app",
+  "requires": [
+    "CONFIG_SOC_WIFI_SUPPORTED=y",
+    "CONFIG_ESP_MATTER_ENABLE_DATA_MODEL=y"
+  ]
+}