This is an eNB emulator application done in python3 to interact with MME (S1AP) and SGW (S1-U). This application can be used to perform and simulate several EMM and ESM procedures, including user plane traffic. This application was tested with real MMEs (lab environment).
To begin with you will need Python3 / Pip installed and a few other libraries / dependencies.
On a Debian/Ubuntu systems you can install with:
apt-get install -y python3-pip libsctp-dev swig python3-pyscard git net-tools
Now we can clone the repository with:
git clone https://github.com/fasferraz/eNB
cd eNB/
Finally we will need to install all of the Python packages needed to run the tool.
We can install all these packages using Pip3 with:
sudo pip3 install -r requirements.txt
We have 3 options for authenticating our simulated subscribers to the network:
- Using a physical SIM connected via a smart card reader (The modem needs to support the AT commands AT+CSIM. You can define the ttyUSBx to use in the options (-u).)
- Statically setting Ki & OP/OPc keys set as parameters when starting the program (See option
--ki=KI,--op=OPand--opc=OPc) - Via an external USIM Server with a physical SIM connected controlled over HTTP (see https://github.com/fasferraz/USIM-https-server)
Note: If none of these options is defined, a default KASME and XRES are used (check corresponding variables inside session_dict_initialization function).
Many variables needed for SA1P and NAS are defined inside the session_dict_initialization function. You can change them to meet your own needs.
When you call the script these are the options available:
python3 eNB_LOCAL.py -h
Usage: eNB_LOCAL.py [options]
Options:
-h, --help show this help message and exit
-i ENB_IP, --ip=ENB_IP
eNB Local IP Address
-m MME_IP, --mme=MME_IP
MME IP Address
-g GATEWAY_IP_ADDRESS, --gateway_ip_address=GATEWAY_IP_ADDRESS
gateway IP address
-u SERIAL_INTERFACE, --usb_device=SERIAL_INTERFACE
modem port (i.e. COMX, or /dev/ttyUSBX), smartcard
reader index (0, 1, 2, ...), or server for https
-I IMSI, --imsi=IMSI IMSI (15 digits)
-E IMEI, --imei=IMEI IMEI-SV (16 digits)
-K KI, --ki=KI ki for Milenage (if not using option -u)
-P OP, --op=OP op for Milenage (if not using option -u)
-C OPC, --opc=OPC opc for Milenage (if not using option -u)
-o PLMN, --operator=PLMN
Operator MCC+MNC
Note: Gateway IP Address (option -g) is needed when the MME or SGW are not in the local LAN. With user plane activated, the default route points to a tunnel interface, so this Gateway IP Address is needed so that MME address and SGW address are also reachable (using /32 routes) using this IP as next-hop address. In case of multiple interfaces, this IP address must be in the same network as the source interface used for eNB address (option -i).
Example usage fo eNB address - 172.16.168.130, and MME address - 172.16.168.8 (eNB and MME in the same LAN), and ttyUSB2:
python3 eNB_LOCAL.py -i 172.16.168.130 -m 172.16.168.8 -u /dev/ttyUSB2
This is the application user interface, where we can see the current options and procedures supported:
This application implements S1-U, so after an successful Attach with PDN Connectivity activation, you can use the laptop applications (browser, terminal, etc...) to send/receive traffic over the GTP-U connection towards the SGW using the session IP address, using a tunnel interface.
In case the session is a NB-IoT session you can also send the user plane over NAS including Non-IP Data Delivery (NIDD).
The basic flow could be for example, option 15 - to bring up the s1 interface, and then option 20 - to perform attach.
The application supports currently the following options:
- S1 Setup type: LTE, NB-IoT, or both
- Mobile Identity Type: IMSI or GUTI
- Attach PDN: Default APN, or Specific APN
- Session Type: 4G, 5G or NB-IoT
- Session Sub-Type: No PSM and No eDRX, PSM, eDRX or both PSM and eDRX
- PDN Type ipv4, ipv6, ipv4v6 or Non-IP
- Control Plane Service Request with Radio Bearer or without Radio Bearer
- Attach Type: EPS Attach, Combined EPS/IMSI Attach or Emergency Attach
- TAU Type: TA Updating, Combined TA/LA Updating or Combined TA/LA Updating with IMSI Attach
- Process Paging: Enabled or Disabled
- SMS Update type: Additional Update Type SMS Only: False or True
- eNB Cell and TAC can change
- P-CSCF Restoration Support capability
In terms of procedures, the application supports the following ones:
- S1 Setup Request
- S1 Reset
- Attach
- Detach
- TAU
- TAU Periodic
- Service Request
- UE Context Release
- Send SMS (a predefined one)
- Control Plane Service Request
- E-RAB Modification Indication (5G)
- Secondary RAT Data Usage Report (5G)
- PDN Connectivity
- PDN Disconnect
- Activate/Deactivate GTP-U for Control Plane
- Activate/Deactivate Data over NAS
- Set/Send Non-IP Packet
You can also find more information in https://fabricioapps.blogspot.com/2020/07/mme-part-i-enb-emulator.html
I had previously done some experiments with SCTP using the native socket module from python3, but starting a ASN.1 module for S1AP from scratch was a big challenge. Fortunately I found some magnificent python modules for ASN.1 and S1AP done by P1 Security that I highly recommend:
They have plenty of modules for almost anything related to Mobile Developments, but for my project i just used the S1AP from pycrate_asn1dir module, and CM from the CryptoMobile module (that has all the ciphering and integrity protocols needed for NAS). In order to derive the integrity and ciphering keys from KASME/CK/IK) i used another module: the Crypto.Hash (pip3 install pycryptodome) that has the HMAC and SHA256 functions needed for KDF.
For serial communication towards the modem I use the pyserial module (pip3 install pyserial)
For smartcard reader communication I use the smartcard module (pyscard module from https://pypi.org/project/pyscard/) and card module (from https://github.com/mitshell/card).
For https request to https server I use the requests module.
So in resume, these are the required external (non-standard) modules:
from pycrate_asn1dir import S1AP
from pycrate_asn1rt.utils import *
from CryptoMobile.CM import *
from CryptoMobile.Milenage import Milenage
from Crypto.Hash import HMAC
from Crypto.Hash import SHA256
For IMSI, and authentication these are the required external (non-standard) modules:
(at least one of these options should be available if we need to use real USIM)
try:
import serial
except:
pass
try:
from smartcard.System import readers
from smartcard.util import toHexString,toBytes
try:
from card.USIM import *
except:
pass
except:
pass
try:
import requests
requests.packages.urllib3.disable_warnings()
except:
pass
For authentication the application also accepts Ki and OP/OPC for Milenage operation (usefull for testing with developments like open5gs, where the USIM parameters are defined in the HSS/UDR).
- Support of gtp kernel (libgtpnl and modprobe gtp) for default namespace. New option -Z
Check it here: https://github.com/fasferraz/eNB/tree/multi-user
- New option to support setting SCTP MAX SEG
- New option to define UERadioCapability in hex string (useful to test UERadioCapability bigger than MTU)
- New option to support a second SCTP connection to another MME, so that you can establish session in one MME, and perform other procedures like TAU in the other, etc...
- New option to set GUTI by CLI. This may be usueful to test S10 procedures (GTP or DNS)
python3 eNB_LOCAL.py -h
Usage: eNB_LOCAL.py [options]
Options:
-h, --help show this help message and exit
-i ENB_IP, --ip=ENB_IP
eNB Local IP Address
-m MME_IP, --mme=MME_IP
MME IP Address
-g GATEWAY_IP_ADDRESS, --gateway_ip_address=GATEWAY_IP_ADDRESS
gateway IP address
-u SERIAL_INTERFACE, --usb_device=SERIAL_INTERFACE
modem port (i.e. COMX, or /dev/ttyUSBX), smartcard
reader index (0, 1, 2, ...), or server for https
-I IMSI, --imsi=IMSI IMSI (15 digits)
-E IMEI, --imei=IMEI IMEI-SV (16 digits)
-K KI, --ki=KI ki for Milenage (if not using option -u)
-P OP, --op=OP op for Milenage (if not using option -u)
-C OPC, --opc=OPC opc for Milenage (if not using option -u)
-o PLMN, --operator=PLMN
Operator MCC+MNC
--tac1=TAC1 1st tracking area code
--tac2=TAC2 2nd tracking area code
-Z, --gtp-kernel Use GTP Kernel. Needs libgtpnl
-S MAXSEG, --maxseg=MAXSEG
SCTP MAX_SEG (>463 bytes)
--ue-radio-capability=UERADIOCAPABILITY
UERadioCapability in hex string
-G GUTI, --guti=GUTI GUTI in format <mcc+mcn>-<mme-group-id>-<mme-
code>-<m-tmsi>
--mme-2=MME_2_IP 2nd MME IP Address