DiskSpd

DISKSPD is a storage load generator / performance test tool from the Microsoft Windows, Windows Server and Cloud Server Infrastructure Engineering teams. Please see the included documentation (docx and pdf formats).

This project has adopted the Microsoft Open Source Code of Conduct. For more information see the Code of Conduct FAQ or contact [email protected] with any additional questions or comments.

What's New?

In addition DISKSPD itself, this repo hosts measurement frameworks which use DISKSPD. The initial example is the VM Fleet being used for Windows Server 2016 Hyper-Converged Storage Spaces Direct work. Look for these under the Frameworks directory.

DISKSPD

DISKSPD 2.0.18a 5/31/2016

IN PROGRESS

• update /? example to use -Sh v. deprecated -h
• fix operation on volumes on GPT partitioned media (:)
• fix IO priority hint to proper stack alignment (if not 8 byte, will fail)
• use iB notation to clarify that text result output is in 2^n units (KiB/MiB/GiB)

DISKSPD 2.0.17 5/01/2016

• -S is expanded to control write-through independent of OS/software cache. Among other things, this allows buffered write-through to be specified (-Sbw).
• XML: adds a new <WriteThrough> element to specify write-through
• XML: <DisableAllCache> is no longer emitted (still parsed, though), in favor or <WriteThrough> and <DisableOSCache>
• Text output: OS/software cache and write-through state are now documented separately (adjacent lines)
• Latency histogram now reports to 9-nines (one part in one billion) in both text and XML output
• Error message added for failure to open write-content source file (-Z<size>,<file>)

DISKSPD 2.0.16b 2/22/2016

• -ag is now default (round robin group-aware affinity)
• new -ag# for group-aware thread->core affinity assignment
• -Sr : remote cache mode
• -Sh : equivalent to -h, all cache modes collapsed under -S
• <ProcessorTopology> (under <System>) element in XML results shows Processor Group topology of the system the test executed on
• <RunTime> (under <System>) element shows run start time in GMT
• -ft : specifies FILE_ATTRIBUTE_TEMPORARY_FILE on open (note: work in progress, effect of this attribute is not fully lit up yet)

VM Fleet

VM Fleet 0.8 6/2017

• get-cluspc: add SMB Client/Server and SMB Direct (not defaulted in Storage group yet)
• test-clusterhealth: flush output pipeline for Debug-StorageSubsystem output
• watch-cluster: restart immediately if all child jobs are no longer running
• watch-cpu: new, visualizer for CPU core utilization distributions

VM Fleet 0.7 3/2017

• create/destroy-vmfleet & update-csv: don't rely on the csv name containing the friendlyname of the vd
• create-vmfleet: err if basevhd inaccessible
• create-vmfleet: simplify call-throughs using $using: syntax
• create-vmfleet: change vhdx layout to match scvmm behavior of seperate directory per VM (important for ReFS MRV)
• create-vmfleet: use A1 VM size by default (1VCPU 1.75GiB RAM)
• start-vmfleet: try starting "failed" vms, usually works
• set-vmfleet: add support for -SizeSpec for A/D/D2v1 & v2 size specification, for ease of reconfig
• stop-vmfleet: pass in full namelist to allow best-case internal parallelization of shutdown
• sweep-cputarget: use %Processor Performance to rescale utilization and account for Turbo effects
• test-clusterhealth: support cleaning out dumps/triage material to simplify ongoing monitoring (assume they're already gathered/etc.)
• test-clusterhealth: additional triage output for storport unresponsive device events
• test-clusterhealth: additional triage comments on SMB client connectivity events
• test-clusterhealth: new test for Mellanox CX3/CX4 error counters that diagnose fabric issues (bad cable/transceiver/roce specifics/etc.)
• get-log: new triage log gatherer for all hv/clustering/smb event channels
• get-cluspc: new cross-cluster performance counter gatherer
• remove run-<>.ps1 scripts that were replaced with run-demo-<>.ps1
• check-outlier: EXPERIMENTAL way to ferret out outlier devices in the cluster, using average sampled latency

VM Fleet 0.6 7/18/2016

• CPU Target Sweep: a sweep script using StorageQoS and a linear CPU/IOPS model to build an empirical sweep of IOPS as a function of CPU, initially for the three classic small IOPS mixes (100r, 90:10 and 70:30 4K). Includes an analysis script which provides the linear model for each off of the results.
• Update sweep mechanics which allow generalized specification of DISKSPD sweep parameters and host performance counter capture.
• install-vmfleet to automate placement after CSV/VD structure is in place (add path, create dirs, copyin, pause)
• add non-linearity detection to analyze-cputarget
• get-linfit is now a utility script (produces objects describing fits)
• all flag files (pause/go/done) pushed down to control\flag directory
• demo scripting works again and autofills vm/node counts
• watch-cluster handles downed/recovered nodes gracefully
• update-csv now handles node names which are logical prefixes of another (node1, node10)

Compiling / Source

Compilation is supported with Visual Studio and Visual Studio Express. Use the Visual Studio solution file inside the diskspd_vs directory.

Source code is hosted at the following repo, if you did not clone it directly:

https://github.com/microsoft/diskspd

A binary release is hosted by Microsoft at the following location:

http://aka.ms/diskspd