Update sgutil to hdev

README.md

@@ -170,7 +170,7 @@ in the original build-directory as described before.
 ## Deploying on the ETHZ HACC-cluster 
 The ETHZ HACC is a premiere cluster for research in systems, architecture, and applications (https://github.com/fpgasystems/hacc/tree/main). Its hardware equipment provides the ideal environment to run Coyote-based experiments, since users can book up to 10 servers with U55C-accelerator cards connected via a fully switched 100G-network. User accounts for this platform can be obtained following the explanation on the previously cited homepage. 
 
-The interaction with the HACC-cluster can be simplified by using the sgutil-run time commands. They also allow to easily program the accelerator with a Coyote-bitstreamd and insert the driver. For this purpose, the scripts `util/program_hacc_local.sh` and `util/program_hacc_remote.sh` have been created. Under the assumption that the hardware-project has been created in `examples_hw/build` and the driver is already compiled in `driver`, the workflow should look like this: 
+The interaction with the HACC-cluster can be simplified by using the hdev-run time commands. They also allow to easily program the accelerator with a Coyote-bitstreamd and insert the driver. For this purpose, the scripts `util/program_hacc_local.sh` and `util/program_hacc_remote.sh` have been created. Under the assumption that the hardware-project has been created in `examples_hw/build` and the driver is already compiled in `driver`, the workflow should look like this: 
 
 ~~~
 $ bash util/program_hacc_local.sh examples_hw/build/bitstreams/cyt_top.bit driver/coyote_drv.ko

docs/source/hacc/index.rst

@@ -17,28 +17,28 @@ In terms of networking communication, each Alveo cards has two 100 Gbps interfac
 
 For a more detailed look at how ETHZ-HACC is organized you can check out the following link: `ETHZ-HACC <https://github.com/fpgasystems/hacc/blob/main/docs/infrastructure.md#infrastructure>`_.
 
-SGRT - Systems Group RunTime
+hdev - HACC Development
 ====================================
 
-Systems Group RunTime (SGRT) is a versatile RunTime software ready to be used on any AMD-compatible heterogeneous cluster.
+HACC Development (hdev) is a versatile RunTime software ready to be used on any AMD-compatible heterogeneous cluster.
 
-SGRT includes a command-line interpreter (CLI) and an API, both utilizing an intuitive device index to improve user workflow. 
+hdev includes a command-line interpreter (CLI) and an API, both utilizing an intuitive device index to improve user workflow. 
 The CLI simplifies infrastructure setup, validation, and device configuration, while the API streamlines accelerated application development, allowing users to focus on their primary objectives.
 
-Using Coyote with SGRT
+Using Coyote with hdev
 ------------------------
 
-The SGRT provides a range of functions which can be used to quickly deploy Coyote on the HACC cluster.
+The hdev provides a range of functions which can be used to quickly deploy Coyote on the HACC cluster.
 
 To load the initial static Coyote image the following command can be used: 
 
 .. code-block:: 
 
-    sgutil program vivado -d <device_id>
+    hdev program vivado -d <device_id>
 
 This will load the default bitstream obtained with the `static` example present in ``examples_hw``. 
 This static layer will thus be the same no matter where the bitstream is built and the shell layers can be swapped on the fly. 
 
 The above command will also handle the hot-plug protocol which rescannes the interconnect, thus no additional warm reboots are necessary, 
 
-The SGRT provides additional helper features that you can use, like validation and building scripts.
+hdev provides additional helper features that you can use, like validation and building scripts.

util/insmod_local.sh

@@ -1,9 +1,9 @@
 # Script to set up IP and MAC address environment variables and insert the driver because environment is not initialized when executing through ssh from a remote server (environment is only initialized when MOTD is shown). 
 
-CLI_PATH=/opt/sgrt/cli
+CLI_PATH=/opt/hdev/cli
 
-IP_address=$($CLI_PATH/sgutil get network -d 1 | awk '$1 == "1:" {print $2}')
-MAC_address=$($CLI_PATH/sgutil get network -d 1 | awk '$1 == "1:" {print $3}' | tr -d '()')
+IP_address=$($CLI_PATH/hdev get network -d 1 | awk '$1 == "1:" {print $2}')
+MAC_address=$($CLI_PATH/hdev get network -d 1 | awk '$1 == "1:" {print $3}' | tr -d '()')
 qsfp_ip=$($CLI_PATH/common/address_to_hex IP $IP_address)
 qsfp_mac=$($CLI_PATH/common/address_to_hex MAC $MAC_address)
 echo "** IP_ADDRESS: $qsfp_ip"

util/program_hacc_local.sh

@@ -31,14 +31,14 @@ fi
 
 
 ## 
-## Program the FPGA via the sgutil call - only work locally for the server that you are currently logged in to
+## Program the FPGA via the hdev call - only work locally for the server that you are currently logged in to
 ##
 
 if [ $PROGRAM_FPGA -eq 1 ]; then
     echo "***"
     echo "** Programming the FPGA with $BIT_PATH"
     echo "***"
-    sgutil program vivado -b $BIT_PATH
+    hdev program vivado -b $BIT_PATH
     echo "***"
     echo "** FPGA programmed"
     echo "***"
@@ -56,8 +56,8 @@ if [ $DRV_INSERT -eq 1 ]; then
     echo "***"
     echo "** IP_ADDRESS: $DEVICE_1_IP_ADDRESS_HEX_0"
     echo "** MAC_ADDRESS: $DEVICE_1_MAC_ADDRESS_0"
-    sgutil program driver -i $DRV_PATH -p ip_addr=$DEVICE_1_IP_ADDRESS_HEX_0,mac_addr=$DEVICE_1_MAC_ADDRESS_0
-    # sgutil program driver -m $DRV_PATH
+    hdev program driver -i $DRV_PATH -p ip_addr=$DEVICE_1_IP_ADDRESS_HEX_0,mac_addr=$DEVICE_1_MAC_ADDRESS_0
+    # hdev program driver -m $DRV_PATH
     echo "***"
     echo "** Driver loaded "
     echo "***"

util/program_hacc_remote.sh

@@ -100,8 +100,7 @@ if [ $DRV_INSERT -eq 1 ]; then
 
     echo "*** Rescan PCIe ..."	
     echo " ** "
-	    #parallel-ssh -H "$hostlist" -x '-tt' 'sudo /opt/sgrt/cli/program/pci_hot_plug "$(hostname -s)"'
-	    parallel-ssh -H "$hostlist" -x '-tt' 'upstream_port=$(/opt/sgrt/cli/get/get_fpga_device_param 1 upstream_port) && root_port=$(/opt/sgrt/cli/get/get_fpga_device_param 1 root_port) && LinkCtl=$(/opt/sgrt/cli/get/get_fpga_device_param 1 LinkCtl) && sudo /opt/sgrt/cli/program/pci_hot_plug 1 $upstream_port $root_port $LinkCtl'
+	    parallel-ssh -H "$hostlist" -x '-tt' 'upstream_port=$(/opt/hdev/cli/get/get_fpga_device_param 1 upstream_port) && root_port=$(/opt/hdev/cli/get/get_fpga_device_param 1 root_port) && LinkCtl=$(/opt/hdev/cli/get/get_fpga_device_param 1 LinkCtl) && sudo /opt/hdev/cli/program/pci_hot_plug 1 $upstream_port $root_port $LinkCtl'
 	    # read -p "Hot-reset done. Press enter to load the driver or Ctrl-C to exit."
 
     echo "*** Compiling the driver ..."