Updating comments for DRC rules

klayout/drc/rule_decks/lres.drc

@@ -24,53 +24,53 @@ if FEOL
   logger.info('Starting LRES derivations')
   lres_poly = poly2.and(nplus).interacting(sab).interacting(res_mk)
 
-  # Rule LRES.1: Minimum width of Poly2 resistor. is 0.8µm
+  # Rule LRES.1: Minimum width of Poly2 resistor is 0.8µm.
   logger.info('Executing rule LRES.1')
   lres1_l1 = lres_poly.width(0.8.um, euclidian)
-  lres1_l1.output('LRES.1', 'LRES.1 : Minimum width of Poly2 resistor. : 0.8µm')
+  lres1_l1.output('LRES.1', 'LRES.1 : Minimum width of Poly2 resistor: 0.8µm')
   lres1_l1.forget
 
-  # Rule LRES.2: Minimum space between Poly2 resistors. is 0.4µm
+  # Rule LRES.2: Minimum space between Poly2 resistors is 0.4µm.
   logger.info('Executing rule LRES.2')
   lres2_l1 = lres_poly.isolated(0.4.um, euclidian)
-  lres2_l1.output('LRES.2', 'LRES.2 : Minimum space between Poly2 resistors. : 0.4µm')
+  lres2_l1.output('LRES.2', 'LRES.2 : Minimum space between Poly2 resistors: 0.4µm')
   lres2_l1.forget
 
-  # Rule LRES.3: Minimum space from Poly2 resistor to COMP.
+  # Rule LRES.3: Minimum space from Poly2 resistor to COMP is 0.6um.
   logger.info('Executing rule LRES.3')
   lres3_l1 = lres_poly.separation(comp, 0.6.um, euclidian).polygons(0.001.um).or(comp.not_outside(lres_poly))
-  lres3_l1.output('LRES.3', 'LRES.3 : Minimum space from Poly2 resistor to COMP.')
+  lres3_l1.output('LRES.3', 'LRES.3 : Minimum space from Poly2 resistor to COMP: 0.6.um')
   lres3_l1.forget
 
-  # Rule LRES.4: Minimum space from Poly2 resistor to unrelated Poly2. is 0.6µm
+  # Rule LRES.4: Minimum space from Poly2 resistor to unrelated Poly2 is 0.6µm.
   logger.info('Executing rule LRES.4')
   lres4_l1 = lres_poly.separation(poly2.not_interacting(sab), 0.6.um, euclidian)
-  lres4_l1.output('LRES.4', 'LRES.4 : Minimum space from Poly2 resistor to unrelated Poly2. : 0.6µm')
+  lres4_l1.output('LRES.4', 'LRES.4 : Minimum space from Poly2 resistor to unrelated Poly2: 0.6µm')
   lres4_l1.forget
 
-  # Rule LRES.5: Minimum Nplus implant overlap of Poly2 resistor. is 0.3µm
+  # Rule LRES.5: Minimum Nplus implant overlap of Poly2 resistor is 0.3µm.
   logger.info('Executing rule LRES.5')
   lres5_l1 = lres_poly.enclosed(nplus, 0.3.um, euclidian).polygons(0.001.um)
   lres5_l2 = lres_poly.not_outside(nplus).not(nplus)
   lres5_l  = lres5_l1.or(lres5_l2)
-  lres5_l.output('LRES.5', 'LRES.5 : Minimum Nplus implant overlap of Poly2 resistor. : 0.3µm')
+  lres5_l.output('LRES.5', 'LRES.5 : Minimum Nplus implant overlap of Poly2 resistor: 0.3µm')
   lres5_l1.forget
   lres5_l2.forget
   lres5_l.forget
 
-  # Rule LRES.6: Minimum salicide block overlap of Poly2 resistor in width direction. is 0.28µm
+  # Rule LRES.6: Minimum salicide block overlap of Poly2 resistor in width direction is 0.28µm.
   logger.info('Executing rule LRES.6')
   lres6_l1 = lres_poly.enclosed(sab, 0.28.um)
-  lres6_l1.output('LRES.6', 'LRES.6 : Minimum salicide block overlap of Poly2 resistor in width direction. : 0.28µm')
+  lres6_l1.output('LRES.6', 'LRES.6 : Minimum salicide block overlap of Poly2 resistor in width direction: 0.28µm')
   lres6_l1.forget
 
-  # Rule LRES.7: Space from salicide block to contact on Poly2 resistor.
+  # Rule LRES.7: Minimum space from salicide block to contact on Poly2 resistor is 0.22.um.
   logger.info('Executing rule LRES.7')
   cont_lres7 = contact.and(lres_poly)
   lres7_l1 = cont_lres7.separation(sab, 0.22.um).polygons(0.001.um)
   lres7_l2 = cont_lres7.interacting(sab)
   lres7_l = lres7_l1.or(lres7_l2)
-  lres7_l.output('LRES.7', 'LRES.7 : Space from salicide block to contact on Poly2 resistor.')
+  lres7_l.output('LRES.7', 'LRES.7 : Minimum space from salicide block to contact on Poly2 resistor: 0.22.um')
   lres7_l.forget
   lres7_l1.forget
   lres7_l2.forget
@@ -94,14 +94,14 @@ if FEOL
 
   # Rule LRES.9b: If the size of single RES_MK mark layer is greater than 15000um2
   ## and both side (X and Y) are greater than 80um.
-  ## then the minimum spacing to adjacent RES_MK layer. is 20µm
+  ## then the minimum spacing to adjacent RES_MK layer is 20µm.
   logger.info('Executing rule LRES.9b')
   lres9b = res_mk.with_area(15_000.001.um, nil).edges.with_length(80.001.um, nil)
   lres9b_l1 = lres9b.separation(res_mk.edges, 20.um)
   lres9b_l1.output('LRES.9b',
                    'LRES.9b : If the size of single RES_MK mark layer is greater than 15000um2
                     and both side (X and Y) are greater than 80um.
-                    then the minimum spacing to adjacent RES_MK layer. : 20µm')
+                    then the minimum spacing to adjacent RES_MK layer: 20µm')
   lres9b_l1.forget
   lres9b.forget
   lres_poly.forget