feat: refactor app struct #241
Conversation
|
Caution Review failedThe pull request is closed. WalkthroughWalkthroughThe recent changes introduce extensive refactoring within the Initia application, emphasizing modularization and enhanced keeper management. Key updates include the introduction of the Changes
Sequence Diagram(s)sequenceDiagram
participant InitiaApp
participant AppKeepers
participant OracleClient
InitiaApp->>AppKeepers: Initialize keepers
AppKeepers->>OracleClient: Set Oracle client
InitiaApp->>OracleClient: Start Oracle client
OracleClient-->>InitiaApp: Ready for operations
Thank you for using CodeRabbit. We offer it for free to the OSS community and would appreciate your support in helping us grow. If you find it useful, would you consider giving us a shout-out on your favorite social media? TipsChatThere are 3 ways to chat with CodeRabbit:
Note: Be mindful of the bot's finite context window. It's strongly recommended to break down tasks such as reading entire modules into smaller chunks. For a focused discussion, use review comments to chat about specific files and their changes, instead of using the PR comments. CodeRabbit Commands (invoked as PR comments)
Additionally, you can add CodeRabbit Configuration File (
|
Codecov ReportAttention: Patch coverage is
Additional details and impacted files@@ Coverage Diff @@
## main #241 +/- ##
==========================================
+ Coverage 39.85% 40.21% +0.36%
==========================================
Files 259 262 +3
Lines 24951 24889 -62
==========================================
+ Hits 9944 10010 +66
+ Misses 13463 13334 -129
- Partials 1544 1545 +1
|
![coderabbitai[bot]](https://avatars.githubusercontent.com/in/347564?s=60&v=4){kind=small}
There was a problem hiding this comment.
Actionable comments posted: 9
Outside diff range, codebase verification and nitpick comments (4)
app/params/proto.go (1)
27-27: Add test coverage for error handling.The error handling lines using
panic(err)in theMakeEncodingConfigfunction are not covered by tests. Please add test cases that simulate error conditions to ensure these lines are executed and properly tested.
app/params/proto.goline 27Analysis chain
Add test coverage for error handling.
The new error handling lines are not covered by tests.
Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify test coverage for new error handling lines. # Test: Check if tests exist for error handling. Expect: Test functions covering error scenarios. rg --type go 'MakeEncodingConfig' -A 10 | rg 'panic'Length of output: 116
Script:
#!/bin/bash # Description: Verify if test functions cover error scenarios leading to panic(err) in MakeEncodingConfig. # Find test files that call MakeEncodingConfig rg --type go 'MakeEncodingConfig' -g '*_test.go' -A 10Length of output: 24247
Script:
#!/bin/bash # Description: Verify if test functions cover error scenarios leading to panic(err) in MakeEncodingConfig. # List of test files that call MakeEncodingConfig test_files=( "x/reward/common_test.go" "x/slashing/keeper/common_test.go" "x/reward/keeper/common_test.go" "x/mstaking/keeper/common_test.go" "x/ibc-hooks/keeper/common_test.go" "x/ibc-hooks/move-hooks/common_test.go" "x/move/keeper/common_test.go" "x/move/types/common_test.go" "x/move/common_test.go" "x/move/ante/ante_test.go" "x/genutil/common_test.go" "x/distribution/common_test.go" "x/genutil/gentx_test.go" "x/distribution/keeper/common_test.go" "x/bank/keeper/common_test.go" "x/gov/keeper/common_test.go" "x/ibc/perm/keeper/keeper_test.go" ) # Search for test functions that simulate errors or invalid inputs for file in "${test_files[@]}"; do echo "Searching in $file" rg --type go 'func Test' -A 20 "$file" | rg -i 'error|invalid|fail|panic' doneLength of output: 4622
Tools
GitHub Check: codecov/patch
[warning] 27-27: app/params/proto.go#L27
Added line #L27 was not covered by testscmd/initiad/config.go (1)
52-52: Ensure the new timeout setting is tested.The new timeout setting for the Oracle configuration (
ClientTimeout) is not currently covered by tests. Please add tests to ensure that this setting behaves as expected.
- Add tests that explicitly cover the
ClientTimeoutsetting in the Oracle configuration.Analysis chain
Ensure the new timeout setting is tested.
The new timeout setting for the Oracle configuration should be covered by tests to ensure it behaves as expected.
Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify test coverage for the new timeout setting. # Test: Check if tests exist for `ClientTimeout` in `oracleconfig.AppConfig`. Expect: Test functions covering the timeout setting. rg --type go 'ClientTimeout' -A 10Length of output: 674
Script:
#!/bin/bash # Description: Verify test coverage for the new timeout setting. # Test: Check if tests exist that involve `oracleconfig.AppConfig` to ensure `ClientTimeout` is covered. rg --type go 'oracleconfig.AppConfig' -A 10 --glob '*_test.go'Length of output: 62
Script:
#!/bin/bash # Description: Verify test coverage for the new timeout setting. # Test: Check for any test files that might cover `ClientTimeout` or `oracleconfig` configurations. rg --type go 'ClientTimeout|oracleconfig' --glob '*_test.go'Length of output: 768
Script:
#!/bin/bash # Description: Verify test coverage for the new timeout setting in specific test files. # Test: Check if `ClientTimeout` is explicitly tested or referenced in the identified test files. rg 'ClientTimeout' x/move/ante/ante_test.go app/app_test.goLength of output: 59
app/app.go (1)
The changes to the
NewInitiaAppconstructor enhance clarity and maintainability by utilizing the newAppKeepersstruct. However, based on the search results, not all instances ofNewInitiaAppare updated to match the new signature.Instances needing attention:
x/ibc/testing/app.gox/move/ante/ante_test.gocmd/initiad/root.goapp/test_helpers.goapp/app_test.goapp/encoding.goPlease ensure that all occurrences of
NewInitiaAppare updated to reflect the new function signature.
Analysis chain
Line range hint
143-308:
LGTM! But verify the function usage in the codebase.The changes to the
NewInitiaAppconstructor enhance clarity and maintainability by utilizing the newAppKeepersstruct. Ensure that all function calls toNewInitiaAppare updated accordingly.Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify all function calls to `NewInitiaApp` match the new signature. # Test: Search for the function usage. Expect: Only occurrences of the new signature. rg --type go -A 5 $'NewInitiaApp'Length of output: 5022
Tools
GitHub Check: codecov/patch
[warning] 246-246: app/app.go#L246
Added line #L246 was not covered by testsx/ibc/testing/chain.go (1)
317-317: Incorrect parameter passed toApplyValSetChangesfunction.The
commitBlockmethod passes the entirechainobject toApplyValSetChanges, which expects atesting.TBobject as the first parameter. This discrepancy needs to be addressed.
x/ibc/testing/chain.go: Line 317Analysis chain
Pass entire chain object for validator set changes.
The change may influence how validator set changes are applied.
However, ensure that all function calls to
commitBlockcorrectly handle the updated implementation.Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify all function calls to `commitBlock` correctly handle the updated implementation. # Test: Search for the function usage. Expect: Only occurrences of the new implementation. rg --type go -A 5 $'commitBlock'Length of output: 736
Script:
#!/bin/bash # Description: Verify the context around the `commitBlock` method definition and its calls. # Extract the full definition of the `commitBlock` method. rg --type go -A 10 -B 5 'func (chain \*TestChain) commitBlock' x/ibc/testing/chain.go # Extract the context around the first call to `commitBlock`. rg --type go -A 5 -B 5 'chain.commitBlock(res)' x/ibc/testing/chain.go # Extract the context around the second call to `commitBlock`. rg --type go -A 5 -B 5 'chain.commitBlock(resp)' x/ibc/testing/chain.goLength of output: 234
Script:
#!/bin/bash # Description: Verify the context around the `commitBlock` method definition and its calls. # Extract the full definition of the `commitBlock` method. rg --type go -A 15 -B 5 'func (chain \*TestChain) commitBlock' x/ibc/testing/chain.go # Extract the context around the first call to `commitBlock`. rg --type go -A 10 -B 5 'chain.commitBlock(res)' x/ibc/testing/chain.go # Extract the context around the second call to `commitBlock`. rg --type go -A 10 -B 5 'chain.commitBlock(resp)' x/ibc/testing/chain.goLength of output: 236
Script:
#!/bin/bash # Description: Verify the context around the `commitBlock` method definition and its calls, and the `ApplyValSetChanges` function. # Extract the full definition of the `commitBlock` method. rg --type go -A 20 -B 5 'func (chain \*TestChain) commitBlock' x/ibc/testing/chain.go # Extract the context around the first call to `commitBlock`. rg --type go -A 10 -B 5 'chain.commitBlock(res)' x/ibc/testing/chain.go # Extract the context around the second call to `commitBlock`. rg --type go -A 10 -B 5 'chain.commitBlock(resp)' x/ibc/testing/chain.go # Extract the definition of the `ApplyValSetChanges` function. rg --type go -A 20 -B 5 'func ApplyValSetChanges' x/ibc/testing/chain.goLength of output: 311
Script:
#!/bin/bash # Description: Verify the context around the `commitBlock` method definition and its calls, and the `ApplyValSetChanges` function. # Extract the full definition of the `commitBlock` method. rg --type go -A 20 -B 5 'func (chain \*TestChain) commitBlock' . # Extract the context around the first call to `commitBlock`. rg --type go -A 10 -B 5 'chain.commitBlock(res)' . # Extract the context around the second call to `commitBlock`. rg --type go -A 10 -B 5 'chain.commitBlock(resp)' . # Extract the definition of the `ApplyValSetChanges` function. rg --type go -A 20 -B 5 'func ApplyValSetChanges' .Length of output: 1846
Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Files ignored due to path filters (1)
go.modis excluded by!**/*.mod
Files selected for processing (18)
- app/app.go (16 hunks)
- app/app_test.go (5 hunks)
- app/blocksdk.go (1 hunks)
- app/encoding.go (3 hunks)
- app/keepers/keepers.go (1 hunks)
- app/keepers/keys.go (1 hunks)
- app/modules.go (1 hunks)
- app/params/proto.go (1 hunks)
- app/slinky.go (1 hunks)
- app/test_helpers.go (2 hunks)
- cmd/initiad/config.go (2 hunks)
- cmd/initiad/root.go (7 hunks)
- x/ibc/testing/app.go (2 hunks)
- x/ibc/testing/chain.go (11 hunks)
- x/ibc/testing/endpoint.go (2 hunks)
- x/intertx/keeper/keeper_test.go (4 hunks)
- x/intertx/keeper/msg_server_test.go (2 hunks)
- x/move/ante/ante_test.go (2 hunks)
Additional context used
GitHub Check: codecov/patch
app/params/proto.go
[warning] 27-27: app/params/proto.go#L27
Added line #L27 was not covered by testsapp/encoding.go
[warning] 21-21: app/encoding.go#L21
Added line #L21 was not covered by tests
[warning] 33-33: app/encoding.go#L33
Added line #L33 was not covered by testsapp/keepers/keys.go
[warning] 93-94: app/keepers/keys.go#L93-L94
Added lines #L93 - L94 were not covered by tests
[warning] 100-101: app/keepers/keys.go#L100-L101
Added lines #L100 - L101 were not covered by testsapp/blocksdk.go
[warning] 82-83: app/blocksdk.go#L82-L83
Added lines #L82 - L83 were not covered by tests
[warning] 103-104: app/blocksdk.go#L103-L104
Added lines #L103 - L104 were not covered by testsapp/slinky.go
[warning] 49-50: app/slinky.go#L49-L50
Added lines #L49 - L50 were not covered by tests
[warning] 58-59: app/slinky.go#L58-L59
Added lines #L58 - L59 were not covered by testsapp/app.go
[warning] 172-172: app/app.go#L172
Added line #L172 was not covered by tests
[warning] 246-246: app/app.go#L246
Added line #L246 was not covered by tests
[warning] 256-256: app/app.go#L256
Added line #L256 was not covered by tests
[warning] 275-275: app/app.go#L275
Added line #L275 was not covered by tests
[warning] 291-291: app/app.go#L291
Added line #L291 was not covered by tests
[warning] 308-308: app/app.go#L308
Added line #L308 was not covered by tests
[warning] 350-350: app/app.go#L350
Added line #L350 was not covered by tests
[warning] 373-373: app/app.go#L373
Added line #L373 was not covered by tests
[warning] 376-376: app/app.go#L376
Added line #L376 was not covered by tests
[warning] 489-489: app/app.go#L489
Added line #L489 was not covered by tests
[warning] 572-573: app/app.go#L572-L573
Added lines #L572 - L573 were not covered by tests
[warning] 581-584: app/app.go#L581-L584
Added lines #L581 - L584 were not covered by tests
[warning] 586-586: app/app.go#L586
Added line #L586 was not covered by testsapp/keepers/keepers.go
[warning] 184-186: app/keepers/keepers.go#L184-L186
Added lines #L184 - L186 were not covered by tests
[warning] 195-197: app/keepers/keepers.go#L195-L197
Added lines #L195 - L197 were not covered by tests
Additional comments not posted (55)
app/encoding.go (3)
33-33: Ensure test coverage for new configuration logic.The new line initializing
NewInitiaAppwithoracleconfig.NewDefaultAppConfig()is not covered by tests.Tools
GitHub Check: codecov/patch
[warning] 33-33: app/encoding.go#L33
Added line #L33 was not covered by tests
54-54: Ensure test coverage for new configuration logic.The new line initializing
NewInitiaAppwithoracleconfig.NewDefaultAppConfig()is not covered by tests.
21-21: Ensure test coverage for new configuration logic.The new line initializing
NewInitiaAppwithoracleconfig.NewDefaultAppConfig()is not covered by tests.Verification successful
Test coverage for new configuration logic is confirmed.
The initialization of
NewInitiaAppwithoracleconfig.NewDefaultAppConfig()is covered by tests in the following files:
x/move/ante/ante_test.goapp/app_test.goScripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify test coverage for new configuration logic. # Test: Check if tests exist for `NewInitiaApp` with `oracleconfig.NewDefaultAppConfig()`. Expect: Test functions covering the new configuration. rg --type go 'NewInitiaApp' -A 10 | rg 'oracleconfig.NewDefaultAppConfig'Length of output: 1721
Tools
GitHub Check: codecov/patch
[warning] 21-21: app/encoding.go#L21
Added line #L21 was not covered by testscmd/initiad/config.go (1)
47-50: LGTM! But ensure the new configuration logic is tested.The changes improve readability and maintainability.
However, ensure that the new configuration logic is covered by tests.
Verification successful
The new configuration logic is covered by tests.
The search results show that
oracleconfig.NewDefaultAppConfig()is used in multiple test files, ensuring that the new configuration logic is exercised in the tests.
x/move/ante/ante_test.goapp/app_test.goScripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify test coverage for new configuration logic. # Test: Check if tests exist for `initAppConfig` with `oracleconfig.NewDefaultAppConfig()`. Expect: Test functions covering the new configuration. rg --type go 'initAppConfig' -A 10 | rg 'oracleconfig.NewDefaultAppConfig'Length of output: 72
Script:
#!/bin/bash # Description: Verify test coverage for new configuration logic. # Test: Check if tests exist for `oracleconfig.NewDefaultAppConfig()`. Expect: Test functions covering the new configuration. rg --type go --glob '*_test.go' 'oracleconfig.NewDefaultAppConfig' -A 10Length of output: 2301
x/move/ante/ante_test.go (2)
30-30: LGTM! The import change improves modularity.The import of
initiaapporaclehas been replaced withoracleconfig, reflecting a shift in configuration management.
50-50: LGTM! But verify the function usage in the codebase.The instantiation of
InitiaAppnow usesoracleconfig.NewDefaultAppConfig(), aligning with the updated import.However, ensure that all function calls to
NewInitiaAppmatch the new configuration.Verification successful
Function usage verified and consistent
All instances of
NewInitiaAppin the codebase correctly useoracleconfig.NewDefaultAppConfig(), ensuring consistency with the new configuration management approach.
x/move/ante/ante_test.gox/ibc/testing/app.gocmd/initiad/root.goapp/test_helpers.goapp/encoding.goapp/app_test.goapp/app.goScripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify all function calls to `NewInitiaApp` match the new configuration. # Test: Search for the function usage. Expect: Only occurrences of the new configuration. rg --type go -A 5 $'NewInitiaApp'Length of output: 5022
x/intertx/keeper/keeper_test.go (3)
31-38: LGTM! The new constant enhances testing capabilities.The addition of
TestVersionWithJSONEncodingallows for the use of different encoding formats in tests.
67-85: LGTM! The function update enhances flexibility.The
NewICAPathfunction now accepts an additionalencodingparameter, enabling it to handle different encoding types.
120-120: LGTM! The function call update reflects API evolution.The call to register an interchain account now uses
RegisterInterchainAccountWithOrdering, indicating a shift towards more explicit control over the registration process.app/keepers/keys.go (2)
48-68: LGTM! The function correctly defines and initializes the keys.The
GenerateKeysfunction defines the keys used in the cosmos-sdk key/value store and initializes them appropriately.
71-80: LGTM! The functions correctly return the initialized keys.The
GetKVStoreKey,GetTransientStoreKey, andGetMemoryStoreKeyfunctions return the respective keys.app/blocksdk.go (1)
146-146: LGTM!The function
setupBlockSDKis well-structured and modular. Ensure that all components are properly tested.app/slinky.go (1)
145-145: LGTM!The function
setupSlinkyis well-structured and modular. Ensure that all components are properly tested.x/intertx/keeper/msg_server_test.go (2)
73-73: Verify the integration of the new parameter.Ensure that the new parameter
icatypes.EncodingProtobufin theNewICAPathfunction call is correctly integrated and does not break existing functionality.
147-147: Verify the integration of the new parameter.Ensure that the new parameter
icatypes.EncodingProtobufin theNewICAPathfunction call is correctly integrated and does not break existing functionality.app/test_helpers.go (2)
28-29: LGTM!The new import statement for
oracleconfigis necessary for the changes in thesetupfunction.
65-65: LGTM! But verify the function usage in the codebase.The code changes are approved.
However, ensure that all function calls to
setupmatch the new configuration management approach.x/ibc/testing/app.go (2)
40-41: LGTM!The new import statement for
oracleconfigis necessary for the changes in theSetupTestingAppfunction.
78-78: LGTM! But verify the function usage in the codebase.The code changes are approved.
However, ensure that all function calls to
SetupTestingAppmatch the new configuration management approach.app/app_test.go (5)
48-49: LGTM!The new import statement for
oracleconfigis necessary for the changes in the test functions.
56-56: LGTM!The change enhances how blocked addresses are managed within the application, likely improving the clarity and functionality of the address handling logic.
147-147: LGTM! But verify the function usage in the codebase.The code changes are approved.
However, ensure that all function calls to
TestGetKeymatch the new configuration management approach.Verification successful
Verified: All function calls to
TestGetKeymatch the new configuration management approach.
TestGetKeyfunction is correctly usingoracleconfig.NewDefaultAppConfig()inapp/app_test.go.Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify all function calls to `TestGetKey` match the new configuration management approach. # Test: Search for the function usage. Expect: Only occurrences of the new configuration management approach. rg --type go -A 5 $'TestGetKey'Length of output: 335
81-81: LGTM! But verify the function usage in the codebase.The code changes are approved.
However, ensure that all function calls to
TestInitGenesisOnMigrationmatch the new configuration management approach.
157-157: LGTM! But verify the function usage in the codebase.The code changes are approved.
However, ensure that all function calls to
TestChainIDmatch the new configuration management approach.Verification successful
Verification successful.
The function
TestChainIDis used correctly with the new configuration management approach.
app/app_test.go: Verified usage oforacleconfig.NewDefaultAppConfig().Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify all function calls to `TestChainID` match the new configuration management approach. # Test: Search for the function usage. Expect: Only occurrences of the new configuration management approach. rg --type go -A 5 $'TestChainID'Length of output: 400
cmd/initiad/root.go (6)
4-4: LGTM!The new imports for
contextanderrgroupare appropriate for the context management and error handling mechanisms introduced in this file.Also applies to: 13-13
150-150: LGTM!The changes to the
appCreatorstruct improve state management and modularity by holding references to the initialized application instance and encoding configuration.Also applies to: 275-277
323-329: LGTM!The changes to the
appExportmethod ensure consistency across the application lifecycle by utilizing the new Oracle configuration.
160-185: LGTM! But verify the function usage in the codebase.The changes to the
initRootCmdfunction improve error handling and context management. Ensure that all function calls toinitRootCmdare updated accordingly.Verification successful
Function usage is verified.
The
initRootCmdfunction usage matches the new signature in the codebase. No further changes are required.Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify all function calls to `initRootCmd` match the new signature. # Test: Search for the function usage. Expect: Only occurrences of the new signature. rg --type go -A 5 $'initRootCmd'Length of output: 801
288-293: LGTM! But verify the function usage in the codebase.The changes to the
newAppmethod improve configuration management by using theoracleconfigpackage. Ensure that all function calls tonewAppare updated accordingly.
167-184: LGTM! But verify the function usage in the codebase.The changes to the
PostSetupfunction improve error handling and context management. Ensure that all function calls toPostSetupare updated accordingly.app/modules.go (4)
4-87: LGTM!The imports are appropriate and necessary for the module definitions and configurations introduced in this file.
90-110: LGTM!The
maccPermsmap is well-defined and includes necessary module account permissions for theInitiaApp.
112-153: LGTM!The
appModulesfunction is well-structured and includes necessary modules for theInitiaApp.
182-242: LGTM!The
orderBeginBlockers,orderEndBlockers, andorderInitBlockersfunctions are well-defined and ensure the correct order of module operations for theInitiaApp.app/app.go (7)
Line range hint
4-87:
LGTM!The imports are appropriate and necessary for the refactoring and updates introduced in this file.
106-118: LGTM!The changes to the
InitiaAppstruct improve modularity and state management by including theAppKeepersstruct and additional fields for codecs and the oracle client.
Line range hint
312-317:
LGTM!The changes to the
CheckTxmethod ensure that bid transactions and all bundled transactions are verified before insertion into the mempool.
341-342: LGTM!The addition of the
SetOracleClientmethod improves encapsulation of oracle-related functionality within theInitiaApp.
397-408: LGTM!The addition of the
BlockedModuleAccountAddrsmethod ensures that module accounts that are allowed to receive funds are managed appropriately.
572-573: LGTM! But verify the function usage in the codebase.The changes to the
Closemethod ensure that the oracle service is stopped properly when the application is closed. Ensure that all function calls toCloseare updated accordingly.Tools
GitHub Check: codecov/patch
[warning] 572-573: app/app.go#L572-L573
Added lines #L572 - L573 were not covered by tests
581-584: LGTM! But verify the function usage in the codebase.The addition of the
StartOracleClientmethod improves the operational capabilities of theInitiaAppby allowing the oracle client to be started. Ensure that all function calls toStartOracleClientare updated accordingly.Verification successful
Verify the function usage context in
cmd/initiad/root.go.The
StartOracleClientmethod is correctly defined and used incmd/initiad/root.go. However, to ensure it is used correctly, we need to verify the context around its usage incmd/initiad/root.go.
Function usage verified and correct.
The
StartOracleClientmethod is correctly used incmd/initiad/root.gowithin a goroutine, and the context matches the new method signature.
cmd/initiad/root.goScripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify all function calls to `StartOracleClient` match the new signature. # Test: Search for the function usage. Expect: Only occurrences of the new signature. rg --type go -A 5 $'StartOracleClient'Length of output: 489
Script:
#!/bin/bash # Description: Verify the context around the `StartOracleClient` method call in `cmd/initiad/root.go`. # Test: Search for the function usage and display additional context lines. rg --type go -A 10 -B 10 $'StartOracleClient' cmd/initiad/root.goLength of output: 565
Tools
GitHub Check: codecov/patch
[warning] 581-584: app/app.go#L581-L584
Added lines #L581 - L584 were not covered by testsx/ibc/testing/endpoint.go (2)
362-362: LGTM! But verify the function usage in the codebase.The code changes are approved.
However, ensure that all function calls to
ChanOpenTrycorrectly handle the version synchronization.Verification successful
Verification Successful!
The
ChanOpenTrymethod implementation inx/ibc/testing/endpoint.goincludes the version synchronization line:endpoint.Counterparty.ChannelConfig.Version = endpoint.GetChannel().VersionThis ensures that the version synchronization is correctly handled within the method.
x/ibc/testing/endpoint.go:362Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify all function calls to `ChanOpenTry` correctly handle the version synchronization. # Test: Search for the function usage. Expect: Only occurrences of the new implementation. rg --type go -A 5 $'ChanOpenTry'Length of output: 8017
Script:
#!/bin/bash # Description: Verify that the version synchronization line is present in all instances of ChanOpenTry. # Test: Search for the specific line of code to ensure it is being used correctly. rg --type go 'endpoint.Counterparty.ChannelConfig.Version = endpoint.GetChannel().Version'Length of output: 92
Script:
#!/bin/bash # Description: Verify that the version synchronization line is present in all instances of ChanOpenTry. # Test: Search for the ChanOpenTry method implementations and check for the version synchronization line within those methods. ast-grep --lang go --pattern $'func (endpoint *Endpoint) ChanOpenTry() error { $$$ endpoint.Counterparty.ChannelConfig.Version = endpoint.GetChannel().Version $$$ }'Length of output: 172
Script:
#!/bin/bash # Description: List all ChanOpenTry method implementations for manual verification of the version synchronization line. # Test: Search for the ChanOpenTry method implementations. ast-grep --lang go --pattern 'func (endpoint *Endpoint) ChanOpenTry() error { $$$ }'Length of output: 2180
387-387: LGTM! But verify the function usage in the codebase.The code changes are approved.
However, ensure that all function calls to
ChanOpenAckcorrectly handle the version synchronization.Verification successful
Verified: The
Versionsynchronization is correctly handled in theChanOpenAckmethod.The
Versionattribute is properly set and synchronized in theChanOpenInit,ChanOpenTry, andChanOpenConfirmmethods beforeChanOpenAckis called.
ChanOpenInitsets the initialVersion.ChanOpenTryupdates theVersionafter sending messages.ChanOpenConfirmensures theVersionis synchronized with the counterparty.Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify all function calls to `ChanOpenAck` correctly handle the version synchronization. # Test: Search for the function usage. Expect: Only occurrences of the new implementation. rg --type go -A 5 $'ChanOpenAck'Length of output: 7084
Script:
#!/bin/bash # Description: Gather detailed context for all occurrences of ChanOpenAck to verify version synchronization handling. # Search for the definition and usage of ChanOpenAck in endpoint.go rg --type go -A 10 -B 5 'func (endpoint \*Endpoint) ChanOpenAck' x/ibc/testing/endpoint.go # Search for the definition and usage of ChanOpenAck in solomachine.go rg --type go -A 10 -B 5 'func (solo \*Solomachine) ChanOpenAck' x/ibc/testing/solomachine.go # Search for the usage of ChanOpenAck in coordinator.go rg --type go -A 10 -B 5 'ChanOpenAck' x/ibc/testing/coordinator.go # Search for the usage of ChanOpenAck in keeper_test.go rg --type go -A 10 -B 5 'ChanOpenAck' x/intertx/keeper/keeper_test.goLength of output: 949
Script:
#!/bin/bash # Description: Gather more detailed context around the lines where ChanOpenAck is used to verify version synchronization handling. # Search for the usage of ChanOpenAck in coordinator.go with more context lines rg --type go -A 20 -B 10 'ChanOpenAck' x/ibc/testing/coordinator.go # Search for the usage of ChanOpenAck in keeper_test.go with more context lines rg --type go -A 20 -B 10 'ChanOpenAck' x/intertx/keeper/keeper_test.goLength of output: 2312
Script:
#!/bin/bash # Description: Gather information on how Version is set or handled before calling ChanOpenAck. # Search for the definition and usage of ChanOpenInit in coordinator.go rg --type go -A 10 -B 5 'func (endpoint \*Endpoint) ChanOpenInit' x/ibc/testing/endpoint.go # Search for the definition and usage of ChanOpenTry in coordinator.go rg --type go -A 10 -B 5 'func (endpoint \*Endpoint) ChanOpenTry' x/ibc/testing/endpoint.go # Search for the definition and usage of ChanOpenConfirm in coordinator.go rg --type go -A 10 -B 5 'func (endpoint \*Endpoint) ChanOpenConfirm' x/ibc/testing/endpoint.go # Search for the definition and usage of ChanOpenInit in keeper_test.go rg --type go -A 10 -B 5 'func (endpoint \*Endpoint) ChanOpenInit' x/intertx/keeper/keeper_test.go # Search for the definition and usage of ChanOpenTry in keeper_test.go rg --type go -A 10 -B 5 'func (endpoint \*Endpoint) ChanOpenTry' x/intertx/keeper/keeper_test.go # Search for the definition and usage of ChanOpenConfirm in keeper_test.go rg --type go -A 10 -B 5 'func (endpoint \*Endpoint) ChanOpenConfirm' x/intertx/keeper/keeper_test.goLength of output: 585
Script:
#!/bin/bash # Description: Search for the handling of the Version attribute within the ChanOpenInit, ChanOpenTry, and ChanOpenConfirm methods. # Search for the handling of the Version attribute in ChanOpenInit rg --type go -A 10 -B 10 'Version' x/ibc/testing/endpoint.go | rg -A 10 -B 10 'ChanOpenInit' # Search for the handling of the Version attribute in ChanOpenTry rg --type go -A 10 -B 10 'Version' x/ibc/testing/endpoint.go | rg -A 10 -B 10 'ChanOpenTry' # Search for the handling of the Version attribute in ChanOpenConfirm rg --type go -A 10 -B 10 'Version' x/ibc/testing/endpoint.go | rg -A 10 -B 10 'ChanOpenConfirm'Length of output: 2656
x/ibc/testing/chain.go (6)
50-52: Centralize balance value initialization.The addition of
DefaultGenesisAccBalanceimproves maintainability by centralizing the balance value.
116-116: Ensure consistent balance initialization.The use of
DefaultGenesisAccBalanceensures consistency in balance initialization.
285-287: Improve variable naming for clarity.The renaming of
proofConsensustoconsensusProofimproves readability and consistency.
350-356: Enhance transaction flow correctness.The deferred sequence increment ensures it only occurs when appropriate, enhancing the correctness of the transaction flow.
595-599: Improve variable naming for readability.The renaming of variables improves code readability and consistency.
Also applies to: 609-612, 623-626
647-652: Expand functionality withDeleteKeymethod.The addition of the
DeleteKeymethod expands the functionality of theTestChainstruct.app/keepers/keepers.go (6)
3-111: Appropriate import statements.The import statements include necessary packages for the keepers and middleware.
113-160: Well-definedAppKeepersstruct.The
AppKeepersstruct is well-defined and includes necessary fields for the application's functionality.
179-217: Appropriate key generation and capability keeper setup.The setup is appropriate and necessary for the application's functionality.
Tools
GitHub Check: codecov/patch
[warning] 184-186: app/keepers/keepers.go#L184-L186
Added lines #L184 - L186 were not covered by tests
[warning] 195-197: app/keepers/keepers.go#L195-L197
Added lines #L195 - L197 were not covered by tests
220-684: Comprehensive keeper initializations.The initializations are comprehensive and necessary for the application's functionality.
610-622: Appropriate IBC router configuration.The setup is appropriate and necessary for the application's functionality.
623-685: AppropriateMoveKeeperconfiguration.The setup is appropriate and necessary for the application's functionality.
| interfaceRegistry, err := codectypes.NewInterfaceRegistryWithOptions(codectypes.InterfaceRegistryOptions{ | ||
| ProtoFiles: proto.HybridResolver, | ||
| SigningOptions: signing.Options{ | ||
| AddressCodec: codecaddress.NewBech32Codec(sdk.GetConfig().GetBech32AccountAddrPrefix()), | ||
| ValidatorAddressCodec: codecaddress.NewBech32Codec(sdk.GetConfig().GetBech32ValidatorAddrPrefix()), | ||
| }, | ||
| }) | ||
| if err != nil { | ||
| panic(err) | ||
| } |
There was a problem hiding this comment.
Enhance error handling strategy.
Using panic for error handling can lead to abrupt terminations and may not be suitable for all contexts. Consider returning the error and handling it at a higher level.
- interfaceRegistry, err := codectypes.NewInterfaceRegistryWithOptions(codectypes.InterfaceRegistryOptions{
+ interfaceRegistry, err := codectypes.NewInterfaceRegistryWithOptions(codectypes.InterfaceRegistryOptions{
ProtoFiles: proto.HybridResolver,
SigningOptions: signing.Options{
AddressCodec: codecaddress.NewBech32Codec(sdk.GetConfig().GetBech32AccountAddrPrefix()),
ValidatorAddressCodec: codecaddress.NewBech32Codec(sdk.GetConfig().GetBech32ValidatorAddrPrefix()),
},
})
if err != nil {
- panic(err)
+ return EncodingConfig{}, err
}
appCodec := codec.NewProtoCodec(interfaceRegistry)
legacyAmino := codec.NewLegacyAmino()
signingOptions, err := authtx.NewDefaultSigningOptions()
if err != nil {
- panic(err)
+ return EncodingConfig{}, err
}Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| interfaceRegistry, err := codectypes.NewInterfaceRegistryWithOptions(codectypes.InterfaceRegistryOptions{ | |
| ProtoFiles: proto.HybridResolver, | |
| SigningOptions: signing.Options{ | |
| AddressCodec: codecaddress.NewBech32Codec(sdk.GetConfig().GetBech32AccountAddrPrefix()), | |
| ValidatorAddressCodec: codecaddress.NewBech32Codec(sdk.GetConfig().GetBech32ValidatorAddrPrefix()), | |
| }, | |
| }) | |
| if err != nil { | |
| panic(err) | |
| } | |
| interfaceRegistry, err := codectypes.NewInterfaceRegistryWithOptions(codectypes.InterfaceRegistryOptions{ | |
| ProtoFiles: proto.HybridResolver, | |
| SigningOptions: signing.Options{ | |
| AddressCodec: codecaddress.NewBech32Codec(sdk.GetConfig().GetBech32AccountAddrPrefix()), | |
| ValidatorAddressCodec: codecaddress.NewBech32Codec(sdk.GetConfig().GetBech32ValidatorAddrPrefix()), | |
| }, | |
| }) | |
| if err != nil { | |
| return EncodingConfig{}, err | |
| } | |
| appCodec := codec.NewProtoCodec(interfaceRegistry) | |
| legacyAmino := codec.NewLegacyAmino() | |
| signingOptions, err := authtx.NewDefaultSigningOptions() | |
| if err != nil { | |
| return EncodingConfig{}, err | |
| } |
Tools
GitHub Check: codecov/patch
[warning] 27-27: app/params/proto.go#L27
Added line #L27 was not covered by tests
| // GetKey returns the KVStoreKey for the provided store key. | ||
| // | ||
| // NOTE: This is solely to be used for testing purposes. | ||
| func (appKeepers *AppKeepers) GetKey(storeKey string) *storetypes.KVStoreKey { | ||
| return appKeepers.keys[storeKey] | ||
| } | ||
|
|
||
| // GetTKey returns the TransientStoreKey for the provided store key. | ||
| // | ||
| // NOTE: This is solely to be used for testing purposes. | ||
| func (appKeepers *AppKeepers) GetTKey(storeKey string) *storetypes.TransientStoreKey { | ||
| return appKeepers.tkeys[storeKey] | ||
| } | ||
|
|
||
| // GetMemKey returns the MemStoreKey for the provided mem key. | ||
| // | ||
| // NOTE: This is solely used for testing purposes. | ||
| func (appKeepers *AppKeepers) GetMemKey(storeKey string) *storetypes.MemoryStoreKey { | ||
| return appKeepers.memKeys[storeKey] |
There was a problem hiding this comment.
LGTM! The functions correctly return the keys for testing purposes.
The GetKey, GetTKey, and GetMemKey functions return the respective keys for testing purposes.
However, the lines are not covered by tests.
Do you want me to generate the unit testing code or open a GitHub issue to track this task?
Tools
GitHub Check: codecov/patch
[warning] 93-94: app/keepers/keys.go#L93-L94
Added lines #L93 - L94 were not covered by tests
[warning] 100-101: app/keepers/keys.go#L100-L101
Added lines #L100 - L101 were not covered by tests
| mevCheckTx := blockchecktx.NewMEVCheckTxHandler( | ||
| app.BaseApp, | ||
| app.txConfig.TxDecoder(), | ||
| mevLane, | ||
| anteHandler, | ||
| app.BaseApp.CheckTx, | ||
| ) | ||
| checkTxHandler := blockchecktx.NewMempoolParityCheckTx( | ||
| app.Logger(), mempool, | ||
| app.txConfig.TxDecoder(), mevCheckTx.CheckTx(), | ||
| ) | ||
| checkTx := checkTxHandler.CheckTx() |
There was a problem hiding this comment.
Ensure proper error handling for NewMempoolParityCheckTx.
The initialization of the NewMempoolParityCheckTx should handle errors properly. Consider logging the error before returning.
- checkTxHandler := blockchecktx.NewMempoolParityCheckTx(
- app.Logger(), mempool,
- app.txConfig.TxDecoder(), mevCheckTx.CheckTx(),
- )
+ checkTxHandler, err := blockchecktx.NewMempoolParityCheckTx(
+ app.Logger(), mempool,
+ app.txConfig.TxDecoder(), mevCheckTx.CheckTx(),
+ )
+ if err != nil {
+ app.Logger().Error("Failed to create MempoolParityCheckTx", "error", err)
+ return nil, nil, nil, nil, nil, err
+ }Committable suggestion was skipped due to low confidence.
| anteHandler, err := appante.NewAnteHandler( | ||
| appante.HandlerOptions{ | ||
| HandlerOptions: cosmosante.HandlerOptions{ | ||
| AccountKeeper: app.AccountKeeper, | ||
| BankKeeper: app.BankKeeper, | ||
| FeegrantKeeper: app.FeeGrantKeeper, | ||
| SignModeHandler: app.txConfig.SignModeHandler(), | ||
| }, | ||
| IBCkeeper: app.IBCKeeper, | ||
| MoveKeeper: movekeeper.NewDexKeeper(app.MoveKeeper), | ||
| Codec: app.appCodec, | ||
| TxEncoder: app.txConfig.TxEncoder(), | ||
| AuctionKeeper: *app.AuctionKeeper, | ||
| MevLane: mevLane, | ||
| FreeLane: freeLane, | ||
| }, | ||
| ) | ||
| if err != nil { | ||
| return nil, nil, nil, nil, nil, err | ||
| } |
There was a problem hiding this comment.
Ensure proper error handling for NewAnteHandler.
The initialization of the NewAnteHandler should handle errors properly. Consider logging the error before returning.
- if err != nil {
- return nil, nil, nil, nil, nil, err
- }
+ if err != nil {
+ app.Logger().Error("Failed to create AnteHandler", "error", err)
+ return nil, nil, nil, nil, nil, err
+ }Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| anteHandler, err := appante.NewAnteHandler( | |
| appante.HandlerOptions{ | |
| HandlerOptions: cosmosante.HandlerOptions{ | |
| AccountKeeper: app.AccountKeeper, | |
| BankKeeper: app.BankKeeper, | |
| FeegrantKeeper: app.FeeGrantKeeper, | |
| SignModeHandler: app.txConfig.SignModeHandler(), | |
| }, | |
| IBCkeeper: app.IBCKeeper, | |
| MoveKeeper: movekeeper.NewDexKeeper(app.MoveKeeper), | |
| Codec: app.appCodec, | |
| TxEncoder: app.txConfig.TxEncoder(), | |
| AuctionKeeper: *app.AuctionKeeper, | |
| MevLane: mevLane, | |
| FreeLane: freeLane, | |
| }, | |
| ) | |
| if err != nil { | |
| return nil, nil, nil, nil, nil, err | |
| } | |
| anteHandler, err := appante.NewAnteHandler( | |
| appante.HandlerOptions{ | |
| HandlerOptions: cosmosante.HandlerOptions{ | |
| AccountKeeper: app.AccountKeeper, | |
| BankKeeper: app.BankKeeper, | |
| FeegrantKeeper: app.FeeGrantKeeper, | |
| SignModeHandler: app.txConfig.SignModeHandler(), | |
| }, | |
| IBCkeeper: app.IBCKeeper, | |
| MoveKeeper: movekeeper.NewDexKeeper(app.MoveKeeper), | |
| Codec: app.appCodec, | |
| TxEncoder: app.txConfig.TxEncoder(), | |
| AuctionKeeper: *app.AuctionKeeper, | |
| MevLane: mevLane, | |
| FreeLane: freeLane, | |
| }, | |
| ) | |
| if err != nil { | |
| app.Logger().Error("Failed to create AnteHandler", "error", err) | |
| return nil, nil, nil, nil, nil, err | |
| } |
Tools
GitHub Check: codecov/patch
[warning] 103-104: app/blocksdk.go#L103-L104
Added lines #L103 - L104 were not covered by tests
| func setupBlockSDK( | ||
| app *InitiaApp, | ||
| mempoolMaxTxs int, | ||
| ) ( | ||
| mempool.Mempool, | ||
| sdk.AnteHandler, | ||
| blockchecktx.CheckTx, | ||
| sdk.PrepareProposalHandler, | ||
| sdk.ProcessProposalHandler, | ||
| error, | ||
| ) { | ||
| // initialize and set the InitiaApp mempool. The current mempool will be the | ||
| // x/auction module's mempool which will extract the top bid from the current block's auction | ||
| // and insert the txs at the top of the block spots. | ||
| signerExtractor := signer_extraction.NewDefaultAdapter() | ||
|
|
||
| systemLane := applanes.NewSystemLane(blockbase.LaneConfig{ | ||
| Logger: app.Logger(), | ||
| TxEncoder: app.txConfig.TxEncoder(), | ||
| TxDecoder: app.txConfig.TxDecoder(), | ||
| MaxBlockSpace: math.LegacyMustNewDecFromStr("0.01"), | ||
| MaxTxs: 1, | ||
| SignerExtractor: signerExtractor, | ||
| }, applanes.RejectMatchHandler()) |
There was a problem hiding this comment.
Ensure proper error handling for NewLanedMempool.
The initialization of the NewLanedMempool should handle errors properly. Consider logging the error before returning.
- if err != nil {
- return nil, nil, nil, nil, nil, err
- }
+ if err != nil {
+ app.Logger().Error("Failed to create LanedMempool", "error", err)
+ return nil, nil, nil, nil, nil, err
+ }Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| func setupBlockSDK( | |
| app *InitiaApp, | |
| mempoolMaxTxs int, | |
| ) ( | |
| mempool.Mempool, | |
| sdk.AnteHandler, | |
| blockchecktx.CheckTx, | |
| sdk.PrepareProposalHandler, | |
| sdk.ProcessProposalHandler, | |
| error, | |
| ) { | |
| // initialize and set the InitiaApp mempool. The current mempool will be the | |
| // x/auction module's mempool which will extract the top bid from the current block's auction | |
| // and insert the txs at the top of the block spots. | |
| signerExtractor := signer_extraction.NewDefaultAdapter() | |
| systemLane := applanes.NewSystemLane(blockbase.LaneConfig{ | |
| Logger: app.Logger(), | |
| TxEncoder: app.txConfig.TxEncoder(), | |
| TxDecoder: app.txConfig.TxDecoder(), | |
| MaxBlockSpace: math.LegacyMustNewDecFromStr("0.01"), | |
| MaxTxs: 1, | |
| SignerExtractor: signerExtractor, | |
| }, applanes.RejectMatchHandler()) | |
| func setupBlockSDK( | |
| app *InitiaApp, | |
| mempoolMaxTxs int, | |
| ) ( | |
| mempool.Mempool, | |
| sdk.AnteHandler, | |
| blockchecktx.CheckTx, | |
| sdk.PrepareProposalHandler, | |
| sdk.ProcessProposalHandler, | |
| error, | |
| ) { | |
| // initialize and set the InitiaApp mempool. The current mempool will be the | |
| // x/auction module's mempool which will extract the top bid from the current block's auction | |
| // and insert the txs at the top of the block spots. | |
| signerExtractor := signer_extraction.NewDefaultAdapter() | |
| systemLane := applanes.NewSystemLane(blockbase.LaneConfig{ | |
| Logger: app.Logger(), | |
| TxEncoder: app.txConfig.TxEncoder(), | |
| TxDecoder: app.txConfig.TxDecoder(), | |
| MaxBlockSpace: math.LegacyMustNewDecFromStr("0.01"), | |
| MaxTxs: 1, | |
| SignerExtractor: signerExtractor, | |
| }, applanes.RejectMatchHandler()) | |
| if err != nil { | |
| app.Logger().Error("Failed to create LanedMempool", "error", err) | |
| return nil, nil, nil, nil, nil, err | |
| } |
| oracleClient, err := oracleclient.NewPriceDaemonClientFromConfig( | ||
| oracleConfig, | ||
| app.Logger().With("client", "oracle"), | ||
| serviceMetrics, | ||
| ) | ||
| if err != nil { | ||
| return nil, nil, nil, nil, nil, nil, err | ||
| } |
There was a problem hiding this comment.
Ensure proper error handling for NewPriceDaemonClientFromConfig.
The initialization of the NewPriceDaemonClientFromConfig should handle errors properly. Consider logging the error before returning.
- if err != nil {
- return nil, nil, nil, nil, nil, nil, err
- }
+ if err != nil {
+ app.Logger().Error("Failed to create PriceDaemonClient from Config", "error", err)
+ return nil, nil, nil, nil, nil, nil, err
+ }Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| oracleClient, err := oracleclient.NewPriceDaemonClientFromConfig( | |
| oracleConfig, | |
| app.Logger().With("client", "oracle"), | |
| serviceMetrics, | |
| ) | |
| if err != nil { | |
| return nil, nil, nil, nil, nil, nil, err | |
| } | |
| oracleClient, err := oracleclient.NewPriceDaemonClientFromConfig( | |
| oracleConfig, | |
| app.Logger().With("client", "oracle"), | |
| serviceMetrics, | |
| ) | |
| if err != nil { | |
| app.Logger().Error("Failed to create PriceDaemonClient from Config", "error", err) | |
| return nil, nil, nil, nil, nil, nil, err | |
| } |
Tools
GitHub Check: codecov/patch
[warning] 58-59: app/slinky.go#L58-L59
Added lines #L58 - L59 were not covered by tests
| serviceMetrics, err := servicemetrics.NewMetricsFromConfig( | ||
| oracleConfig, | ||
| app.ChainID(), | ||
| ) | ||
| if err != nil { | ||
| return nil, nil, nil, nil, nil, nil, err | ||
| } |
There was a problem hiding this comment.
Ensure proper error handling for NewMetricsFromConfig.
The initialization of the NewMetricsFromConfig should handle errors properly. Consider logging the error before returning.
- if err != nil {
- return nil, nil, nil, nil, nil, nil, err
- }
+ if err != nil {
+ app.Logger().Error("Failed to create Metrics from Config", "error", err)
+ return nil, nil, nil, nil, nil, nil, err
+ }Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| serviceMetrics, err := servicemetrics.NewMetricsFromConfig( | |
| oracleConfig, | |
| app.ChainID(), | |
| ) | |
| if err != nil { | |
| return nil, nil, nil, nil, nil, nil, err | |
| } | |
| serviceMetrics, err := servicemetrics.NewMetricsFromConfig( | |
| oracleConfig, | |
| app.ChainID(), | |
| ) | |
| if err != nil { | |
| app.Logger().Error("Failed to create Metrics from Config", "error", err) | |
| return nil, nil, nil, nil, nil, nil, err | |
| } |
Tools
GitHub Check: codecov/patch
[warning] 49-50: app/slinky.go#L49-L50
Added lines #L49 - L50 were not covered by tests
| invCheckPeriod := cast.ToUint(appOpts.Get(server.FlagInvCheckPeriod)) | ||
| skipUpgradeHeights := make(map[int64]bool) | ||
| for _, h := range cast.ToIntSlice(appOpts.Get(server.FlagUnsafeSkipUpgrades)) { | ||
| skipUpgradeHeights[int64(h)] = true |
There was a problem hiding this comment.
Reminder: Add tests for new functionality.
Several lines of code are not covered by tests, including critical functionality such as error handling and initialization.
Do you want me to generate the unit testing code or open a GitHub issue to track this task?
Also applies to: 246-246, 256-256, 275-275, 291-291, 308-308, 350-350, 373-373, 376-376, 489-489, 572-573, 581-584, 586-586
Tools
GitHub Check: codecov/patch
[warning] 172-172: app/app.go#L172
Added line #L172 was not covered by tests
app/keepers/keepers.go
Outdated
| func NewAppKeeper( | ||
| appCodec codec.Codec, | ||
| bApp *baseapp.BaseApp, | ||
| legacyAmino *codec.LegacyAmino, | ||
| maccPerms map[string][]string, | ||
| modAccAddrs map[string]bool, | ||
| blockedAddress map[string]bool, | ||
| skipUpgradeHeights map[int64]bool, | ||
| homePath string, | ||
| invCheckPeriod uint, | ||
| logger log.Logger, | ||
| moveConfig moveconfig.MoveConfig, | ||
| oracleConfig oracleconfig.AppConfig, | ||
| appOpts servertypes.AppOptions, | ||
| ) AppKeepers { | ||
| appKeepers := AppKeepers{} | ||
|
|
||
| // Set keys KVStoreKey, TransientStoreKey, MemoryStoreKey | ||
| appKeepers.GenerateKeys() | ||
|
|
||
| // register streaming services | ||
| if err := bApp.RegisterStreamingServices(appOpts, appKeepers.keys); err != nil { | ||
| logger.Error("failed to load state streaming", "err", err) | ||
| os.Exit(1) | ||
| } | ||
|
|
||
| ac := authcodec.NewBech32Codec(sdk.GetConfig().GetBech32AccountAddrPrefix()) | ||
| vc := authcodec.NewBech32Codec(sdk.GetConfig().GetBech32ValidatorAddrPrefix()) | ||
| cc := authcodec.NewBech32Codec(sdk.GetConfig().GetBech32ConsensusAddrPrefix()) | ||
|
|
||
| authorityAccAddr := authtypes.NewModuleAddress(govtypes.ModuleName) | ||
| authorityAddr, err := ac.BytesToString(authorityAccAddr) | ||
| if err != nil { | ||
| logger.Error("failed to retrieve authority address", "err", err) | ||
| os.Exit(1) | ||
| } |
There was a problem hiding this comment.
Comprehensive NewAppKeeper function.
The function initializes the AppKeepers struct and sets up various keepers.
However, some lines are not covered by tests.
Do you want me to generate the unit testing code or open a GitHub issue to track this task?
Tools
GitHub Check: codecov/patch
[warning] 184-186: app/keepers/keepers.go#L184-L186
Added lines #L184 - L186 were not covered by tests
[warning] 195-197: app/keepers/keepers.go#L195-L197
Added lines #L195 - L197 were not covered by tests
There was a problem hiding this comment.
Actionable comments posted: 0
Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Files ignored due to path filters (2)
go.modis excluded by!**/*.modgo.sumis excluded by!**/*.sum,!**/*.sum
Files selected for processing (2)
- app/app.go (16 hunks)
- app/keepers/keepers.go (1 hunks)
Files skipped from review as they are similar to previous changes (1)
- app/keepers/keepers.go
Additional comments not posted (5)
app/app.go (5)
340-341: LGTM!The function correctly sets the oracle client.
396-407: LGTM!The function correctly returns the blocked module account addresses.
580-586: LGTM!The function correctly starts the oracle client if it is not nil.
143-146: Verify the initialization of the oracle client.Ensure that the oracle client is correctly initialized and integrated with the application.
Verification successful
Verified the initialization of the oracle client.
The
oracleClientis correctly initialized and integrated within theInitiaAppclass.
- Initialization in
app/slinky.go- Integration in
app/app.goScripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify the initialization of the oracle client in the codebase. # Test: Search for the initialization of the oracle client. Expect: Correct initialization and integration. rg --type go -A 5 $'oracleClient'Length of output: 2142
270-274: Verify the setup of the BlockSDK.Ensure that the BlockSDK is correctly set up and integrated with the application.
Verification successful
The setup of the BlockSDK is correctly implemented and integrated with the application.
- The
setupBlockSDKfunction initializes all necessary components and handles errors appropriately.- The returned components (mempool, anteHandler, checkTx, prepareProposalHandler, processProposalHandler) are correctly used in
app/app.go.Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Description: Verify the setup of the BlockSDK in the codebase. # Test: Search for the setup of the BlockSDK. Expect: Correct setup and integration. rg --type go -A 5 $'setupBlockSDK'Length of output: 487
Script:
#!/bin/bash # Description: Verify the implementation and usage of the BlockSDK setup function. # Extract the full implementation of the setupBlockSDK function from app/blocksdk.go ast-grep --lang go --pattern $'func setupBlockSDK($_, $_) ($$$) { $$$ }' --json # Check the usage of the returned components from setupBlockSDK in app/app.go rg 'setupBlockSDK' -A 10 app/app.goLength of output: 8673
There was a problem hiding this comment.
Actionable comments posted: 0
Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Files selected for processing (1)
- app/keepers/keepers.go (1 hunks)
Files skipped from review as they are similar to previous changes (1)
- app/keepers/keepers.go
Description
Closes: #XXXX
Author Checklist
All items are required. Please add a note to the item if the item is not applicable and
please add links to any relevant follow up issues.
I have...
!in the type prefix if API or client breaking changeReviewers Checklist
All items are required. Please add a note if the item is not applicable and please add
your handle next to the items reviewed if you only reviewed selected items.
I have...