Merge pull request #208 from JarTheHead/main

Add probe mount for RtV6 Revo nozzle adapter

Usermods/JarTheHead/Readme.md

@@ -0,0 +1,32 @@
+## [JarTheHead's](https://github.com/JarTheHead) Klicky Probe for the RtV6 Revo nozzle adapter
+This is a modification of Klicky probe for use with a Revo nozzle adapter. It is primarily remixed from [SemperDiscere's DragonUHF probe](https://github.com/JarTheHead/Klicky-Probe/tree/main/Usermods/SemperDiscere). The RtV6 adds about 6mm of height to a standard Revo nozzle when using a typical RepRap nozzle. Only designed with Klicky (no plans for NG or UnKlicky).
+
+
+## Build
+Build Is Similar to the AB Mount. 
+- Solder wires to the outside pins of the D5F-L switch
+- Remove Lever from switch
+- Estimate wire length and cut
+- Strip Wires
+- Feed wires through Holes
+- Seat Magnets
+- Test continuity
+- Trim wires
+- Screw switch to Main Body
+
+![Klicky probe Front](./Photos/Probe_RtV6_Front.jpg)
+
+![Klicky probe 3/4](./Photos/Probe_RtV6_Corner.jpg)
+
+![Klicky probe Rear](./Photos/Probe_RtV6_Rear.jpg)
+## Source Klicky probe file
+[Klicky Probe](../../CAD/KlickyProbe_v2_v59.step)
+
+
+## BOM:
+| Qty | Name                                                    |
+| --- | ------------------------------------------------------- |
+| 4 | 6x3 Magnets |
+| 2 | M2 10mm |
+| 2 | 24 ga wire |
+| 1 | Omron D2F-5 switch (or similar) |

Usermods/README.md

@@ -18,13 +18,13 @@ There are three types of user mod:
 * Klicky Probe (identified by "probe")
 
 
-| Owner     | Descrption                                                   | Mod Type    | Printer/Toolhead |
-| --------- | ------------------------------------------------------------ | ----------- | ---------------- |
-| TheMacBoy | [support arm for Ender 5 Plus with rails](./TheMacBoy)       | dock mount  | Ender 5 Plus     |
-| TheMacBoy | [Klicky Probe mount for EVA](./TheMacBoy)                    | probe mount | EVA 2.2+         |
-| DoubleT   | [Klicky Probe mount for EVA Trihorn UHF fan duct](./DoubleT) | probe mount | EVA 2.4+         |
-| SSerpente | [Klicky Probe mount for VzBot](./SSerpente)                  | dock mount  | VzBot            |
-| WhistlinRic | [UnklickyNG BFG in halves with m2x10](./WhistlinRic)         | probe       | N/A              |
-| SemperDiscere   | [Klicky Probe for Dragon UHF Hotend](./SemperDiscere) | probe | Voron Dragon UHF         |
-
+| Owner         | Descrption                                                   | Mod Type    | Printer/Toolhead |
+| ------------- | ------------------------------------------------------------ | ----------- | ---------------- |
+| TheMacBoy     | [support arm for Ender 5 Plus with rails](./TheMacBoy)       | dock mount  | Ender 5 Plus     |
+| TheMacBoy     | [Klicky Probe mount for EVA](./TheMacBoy)                    | probe mount | EVA 2.2+         |
+| DoubleT       | [Klicky Probe mount for EVA Trihorn UHF fan duct](./DoubleT) | probe mount | EVA 2.4+         |
+| SSerpente     | [Klicky Probe mount for VzBot](./SSerpente)                  | dock mount  | VzBot            |
+| WhistlinRic   | [UnklickyNG BFG in halves with m2x10](./WhistlinRic)         | probe       | N/A              |
+| SemperDiscere | [Klicky Probe for Dragon UHF Hotend](./SemperDiscere)        | probe       | Voron Dragon UHF |
+| JarTheHead    | [Klicky Probe for RtV6 Revo Nozzle Adapter](./JarTheHead)    | probe       | Voron Revo       |