Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits)
  netfilter: Remove ADVANCED dependency from NF_CONNTRACK_NETBIOS_NS
  ipv4: flush route cache after change accept_local
  sch_red: fix red_change
  Revert "udp: remove redundant variable"
  bridge: master device stuck in no-carrier state forever when in user-stp mode
  ipv4: Perform peer validation on cached route lookup.
  net/core: fix rollback handler in register_netdevice_notifier
  sch_red: fix red_calc_qavg_from_idle_time
  bonding: only use primary address for ARP
  ipv4: fix lockdep splat in rt_cache_seq_show
  sch_teql: fix lockdep splat
  net: fec: Select the FEC driver by default for i.MX SoCs
  isdn: avoid copying too long drvid
  isdn: make sure strings are null terminated
  netlabel: Fix build problems when IPv6 is not enabled
  sctp: better integer overflow check in sctp_auth_create_key()
  sctp: integer overflow in sctp_auth_create_key()
  ipv6: Set mcast_hops to IPV6_DEFAULT_MCASTHOPS when -1 was given.
  net: Fix corruption in /proc/*/net/dev_mcast
  mac80211: fix race between the AGG SM and the Tx data path
  ...

drivers/isdn/divert/divert_procfs.c

@@ -242,6 +242,12 @@ static int isdn_divert_ioctl_unlocked(struct file *file, uint cmd, ulong arg)
 		case IIOCDOCFINT:
 			if (!divert_if.drv_to_name(dioctl.cf_ctrl.drvid))
 				return (-EINVAL);	/* invalid driver */
+			if (strnlen(dioctl.cf_ctrl.msn, sizeof(dioctl.cf_ctrl.msn)) ==
+					sizeof(dioctl.cf_ctrl.msn))
+				return -EINVAL;
+			if (strnlen(dioctl.cf_ctrl.fwd_nr, sizeof(dioctl.cf_ctrl.fwd_nr)) ==
+					sizeof(dioctl.cf_ctrl.fwd_nr))
+				return -EINVAL;
 			if ((i = cf_command(dioctl.cf_ctrl.drvid,
 					    (cmd == IIOCDOCFACT) ? 1 : (cmd == IIOCDOCFDIS) ? 0 : 2,
 					    dioctl.cf_ctrl.cfproc,

drivers/isdn/i4l/isdn_net.c

@@ -2756,6 +2756,9 @@ isdn_net_setcfg(isdn_net_ioctl_cfg * cfg)
 			char *c,
 			*e;
 
+			if (strnlen(cfg->drvid, sizeof(cfg->drvid)) ==
+					sizeof(cfg->drvid))
+				return -EINVAL;
 			drvidx = -1;
 			chidx = -1;
 			strcpy(drvid, cfg->drvid);

drivers/net/arcnet/Kconfig

@@ -4,7 +4,7 @@
 
 menuconfig ARCNET
 	depends on NETDEVICES && (ISA || PCI || PCMCIA)
-	bool "ARCnet support"
+	tristate "ARCnet support"
 	---help---
 	  If you have a network card of this type, say Y and check out the
 	  (arguably) beautiful poetry in

drivers/net/bonding/bond_main.c

@@ -2553,30 +2553,6 @@ void bond_mii_monitor(struct work_struct *work)
 	}
 }
 
-static __be32 bond_glean_dev_ip(struct net_device *dev)
-{
-	struct in_device *idev;
-	struct in_ifaddr *ifa;
-	__be32 addr = 0;
-
-	if (!dev)
-		return 0;
-
-	rcu_read_lock();
-	idev = __in_dev_get_rcu(dev);
-	if (!idev)
-		goto out;
-
-	ifa = idev->ifa_list;
-	if (!ifa)
-		goto out;
-
-	addr = ifa->ifa_local;
-out:
-	rcu_read_unlock();
-	return addr;
-}
-
 static int bond_has_this_ip(struct bonding *bond, __be32 ip)
 {
 	struct vlan_entry *vlan;
@@ -3322,14 +3298,18 @@ static int bond_inetaddr_event(struct notifier_block *this, unsigned long event,
 	struct bonding *bond;
 	struct vlan_entry *vlan;
 
+	/* we only care about primary address */
+	if(ifa->ifa_flags & IFA_F_SECONDARY)
+		return NOTIFY_DONE;
+
 	list_for_each_entry(bond, &bn->dev_list, bond_list) {
 		if (bond->dev == event_dev) {
 			switch (event) {
 			case NETDEV_UP:
 				bond->master_ip = ifa->ifa_local;
 				return NOTIFY_OK;
 			case NETDEV_DOWN:
-				bond->master_ip = bond_glean_dev_ip(bond->dev);
+				bond->master_ip = 0;
 				return NOTIFY_OK;
 			default:
 				return NOTIFY_DONE;
@@ -3345,8 +3325,7 @@ static int bond_inetaddr_event(struct notifier_block *this, unsigned long event,
 					vlan->vlan_ip = ifa->ifa_local;
 					return NOTIFY_OK;
 				case NETDEV_DOWN:
-					vlan->vlan_ip =
-						bond_glean_dev_ip(vlan_dev);
+					vlan->vlan_ip = 0;
 					return NOTIFY_OK;
 				default:
 					return NOTIFY_DONE;

drivers/net/can/sja1000/peak_pci.c

@@ -20,7 +20,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/netdevice.h>

drivers/net/ethernet/broadcom/b44.c

@@ -608,7 +608,7 @@ static void b44_tx(struct b44 *bp)
 				 skb->len,
 				 DMA_TO_DEVICE);
 		rp->skb = NULL;
-		dev_kfree_skb(skb);
+		dev_kfree_skb_irq(skb);
 	}
 
 	bp->tx_cons = cons;

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

@@ -10327,6 +10327,43 @@ static int bnx2x_54618se_config_init(struct bnx2x_phy *phy,
 	return 0;
 }
 
+
+static void bnx2x_5461x_set_link_led(struct bnx2x_phy *phy,
+				       struct link_params *params, u8 mode)
+{
+	struct bnx2x *bp = params->bp;
+	u16 temp;
+
+	bnx2x_cl22_write(bp, phy,
+		MDIO_REG_GPHY_SHADOW,
+		MDIO_REG_GPHY_SHADOW_LED_SEL1);
+	bnx2x_cl22_read(bp, phy,
+		MDIO_REG_GPHY_SHADOW,
+		&temp);
+	temp &= 0xff00;
+
+	DP(NETIF_MSG_LINK, "54618x set link led (mode=%x)\n", mode);
+	switch (mode) {
+	case LED_MODE_FRONT_PANEL_OFF:
+	case LED_MODE_OFF:
+		temp |= 0x00ee;
+		break;
+	case LED_MODE_OPER:
+		temp |= 0x0001;
+		break;
+	case LED_MODE_ON:
+		temp |= 0x00ff;
+		break;
+	default:
+		break;
+	}
+	bnx2x_cl22_write(bp, phy,
+		MDIO_REG_GPHY_SHADOW,
+		MDIO_REG_GPHY_SHADOW_WR_ENA | temp);
+	return;
+}
+
+
 static void bnx2x_54618se_link_reset(struct bnx2x_phy *phy,
 				     struct link_params *params)
 {
@@ -11103,7 +11140,7 @@ static struct bnx2x_phy phy_54618se = {
 	.config_loopback = (config_loopback_t)bnx2x_54618se_config_loopback,
 	.format_fw_ver	= (format_fw_ver_t)NULL,
 	.hw_reset	= (hw_reset_t)NULL,
-	.set_link_led	= (set_link_led_t)NULL,
+	.set_link_led	= (set_link_led_t)bnx2x_5461x_set_link_led,
 	.phy_specific_func = (phy_specific_func_t)NULL
 };
 /*****************************************************************/

drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h

@@ -6990,6 +6990,7 @@ Theotherbitsarereservedandshouldbezero*/
 #define MDIO_REG_INTR_MASK				0x1b
 #define MDIO_REG_INTR_MASK_LINK_STATUS			(0x1 << 1)
 #define MDIO_REG_GPHY_SHADOW				0x1c
+#define MDIO_REG_GPHY_SHADOW_LED_SEL1			(0x0d << 10)
 #define MDIO_REG_GPHY_SHADOW_LED_SEL2			(0x0e << 10)
 #define MDIO_REG_GPHY_SHADOW_WR_ENA			(0x1 << 15)
 #define MDIO_REG_GPHY_SHADOW_AUTO_DET_MED		(0x1e << 10)

drivers/net/ethernet/davicom/dm9000.c

@@ -613,7 +613,7 @@ static int dm9000_set_wol(struct net_device *dev, struct ethtool_wolinfo *w)
 
 		if (!dm->wake_state)
 			irq_set_irq_wake(dm->irq_wake, 1);
-		else if (dm->wake_state & !opts)
+		else if (dm->wake_state && !opts)
 			irq_set_irq_wake(dm->irq_wake, 0);
 	}
 

drivers/net/ethernet/freescale/Kconfig

@@ -24,6 +24,7 @@ config FEC
 	bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
 	depends on (M523x || M527x || M5272 || M528x || M520x || M532x || \
 		   ARCH_MXC || ARCH_MXS)
+	default ARCH_MXC || ARCH_MXS if ARM
 	select PHYLIB
 	---help---
 	  Say Y here if you want to use the built-in 10/100 Fast ethernet

drivers/net/ethernet/ibm/ehea/ehea.h

@@ -61,9 +61,9 @@
 #ifdef EHEA_SMALL_QUEUES
 #define EHEA_MAX_CQE_COUNT      1023
 #define EHEA_DEF_ENTRIES_SQ     1023
-#define EHEA_DEF_ENTRIES_RQ1    4095
+#define EHEA_DEF_ENTRIES_RQ1    1023
 #define EHEA_DEF_ENTRIES_RQ2    1023
-#define EHEA_DEF_ENTRIES_RQ3    1023
+#define EHEA_DEF_ENTRIES_RQ3    511
 #else
 #define EHEA_MAX_CQE_COUNT      4080
 #define EHEA_DEF_ENTRIES_SQ     4080

drivers/net/ethernet/ibm/ehea/ehea_main.c

@@ -371,7 +371,8 @@ static void ehea_update_stats(struct work_struct *work)
 out_herr:
 	free_page((unsigned long)cb2);
 resched:
-	schedule_delayed_work(&port->stats_work, msecs_to_jiffies(1000));
+	schedule_delayed_work(&port->stats_work,
+			      round_jiffies_relative(msecs_to_jiffies(1000)));
 }
 
 static void ehea_refill_rq1(struct ehea_port_res *pr, int index, int nr_of_wqes)
@@ -2434,7 +2435,8 @@ static int ehea_open(struct net_device *dev)
 	}
 
 	mutex_unlock(&port->port_lock);
-	schedule_delayed_work(&port->stats_work, msecs_to_jiffies(1000));
+	schedule_delayed_work(&port->stats_work,
+			      round_jiffies_relative(msecs_to_jiffies(1000)));
 
 	return ret;
 }

drivers/net/ethernet/ibm/iseries_veth.c

@@ -1421,7 +1421,7 @@ static void veth_receive(struct veth_lpar_connection *cnx,
 
 		/* FIXME: do we need this? */
 		memset(local_list, 0, sizeof(local_list));
-		memset(remote_list, 0, sizeof(VETH_MAX_FRAMES_PER_MSG));
+		memset(remote_list, 0, sizeof(remote_list));
 
 		/* a 0 address marks the end of the valid entries */
 		if (senddata->addr[startchunk] == 0)

drivers/net/ethernet/jme.c

@@ -1744,6 +1744,112 @@ jme_phy_off(struct jme_adapter *jme)
 		jme_new_phy_off(jme);
 }
 
+static int
+jme_phy_specreg_read(struct jme_adapter *jme, u32 specreg)
+{
+	u32 phy_addr;
+
+	phy_addr = JM_PHY_SPEC_REG_READ | specreg;
+	jme_mdio_write(jme->dev, jme->mii_if.phy_id, JM_PHY_SPEC_ADDR_REG,
+			phy_addr);
+	return jme_mdio_read(jme->dev, jme->mii_if.phy_id,
+			JM_PHY_SPEC_DATA_REG);
+}
+
+static void
+jme_phy_specreg_write(struct jme_adapter *jme, u32 ext_reg, u32 phy_data)
+{
+	u32 phy_addr;
+
+	phy_addr = JM_PHY_SPEC_REG_WRITE | ext_reg;
+	jme_mdio_write(jme->dev, jme->mii_if.phy_id, JM_PHY_SPEC_DATA_REG,
+			phy_data);
+	jme_mdio_write(jme->dev, jme->mii_if.phy_id, JM_PHY_SPEC_ADDR_REG,
+			phy_addr);
+}
+
+static int
+jme_phy_calibration(struct jme_adapter *jme)
+{
+	u32 ctrl1000, phy_data;
+
+	jme_phy_off(jme);
+	jme_phy_on(jme);
+	/*  Enabel PHY test mode 1 */
+	ctrl1000 = jme_mdio_read(jme->dev, jme->mii_if.phy_id, MII_CTRL1000);
+	ctrl1000 &= ~PHY_GAD_TEST_MODE_MSK;
+	ctrl1000 |= PHY_GAD_TEST_MODE_1;
+	jme_mdio_write(jme->dev, jme->mii_if.phy_id, MII_CTRL1000, ctrl1000);
+
+	phy_data = jme_phy_specreg_read(jme, JM_PHY_EXT_COMM_2_REG);
+	phy_data &= ~JM_PHY_EXT_COMM_2_CALI_MODE_0;
+	phy_data |= JM_PHY_EXT_COMM_2_CALI_LATCH |
+			JM_PHY_EXT_COMM_2_CALI_ENABLE;
+	jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_2_REG, phy_data);
+	msleep(20);
+	phy_data = jme_phy_specreg_read(jme, JM_PHY_EXT_COMM_2_REG);
+	phy_data &= ~(JM_PHY_EXT_COMM_2_CALI_ENABLE |
+			JM_PHY_EXT_COMM_2_CALI_MODE_0 |
+			JM_PHY_EXT_COMM_2_CALI_LATCH);
+	jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_2_REG, phy_data);
+
+	/*  Disable PHY test mode */
+	ctrl1000 = jme_mdio_read(jme->dev, jme->mii_if.phy_id, MII_CTRL1000);
+	ctrl1000 &= ~PHY_GAD_TEST_MODE_MSK;
+	jme_mdio_write(jme->dev, jme->mii_if.phy_id, MII_CTRL1000, ctrl1000);
+	return 0;
+}
+
+static int
+jme_phy_setEA(struct jme_adapter *jme)
+{
+	u32 phy_comm0 = 0, phy_comm1 = 0;
+	u8 nic_ctrl;
+
+	pci_read_config_byte(jme->pdev, PCI_PRIV_SHARE_NICCTRL, &nic_ctrl);
+	if ((nic_ctrl & 0x3) == JME_FLAG_PHYEA_ENABLE)
+		return 0;
+
+	switch (jme->pdev->device) {
+	case PCI_DEVICE_ID_JMICRON_JMC250:
+		if (((jme->chip_main_rev == 5) &&
+			((jme->chip_sub_rev == 0) || (jme->chip_sub_rev == 1) ||
+			(jme->chip_sub_rev == 3))) ||
+			(jme->chip_main_rev >= 6)) {
+			phy_comm0 = 0x008A;
+			phy_comm1 = 0x4109;
+		}
+		if ((jme->chip_main_rev == 3) &&
+			((jme->chip_sub_rev == 1) || (jme->chip_sub_rev == 2)))
+			phy_comm0 = 0xE088;
+		break;
+	case PCI_DEVICE_ID_JMICRON_JMC260:
+		if (((jme->chip_main_rev == 5) &&
+			((jme->chip_sub_rev == 0) || (jme->chip_sub_rev == 1) ||
+			(jme->chip_sub_rev == 3))) ||
+			(jme->chip_main_rev >= 6)) {
+			phy_comm0 = 0x008A;
+			phy_comm1 = 0x4109;
+		}
+		if ((jme->chip_main_rev == 3) &&
+			((jme->chip_sub_rev == 1) || (jme->chip_sub_rev == 2)))
+			phy_comm0 = 0xE088;
+		if ((jme->chip_main_rev == 2) && (jme->chip_sub_rev == 0))
+			phy_comm0 = 0x608A;
+		if ((jme->chip_main_rev == 2) && (jme->chip_sub_rev == 2))
+			phy_comm0 = 0x408A;
+		break;
+	default:
+		return -ENODEV;
+	}
+	if (phy_comm0)
+		jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_0_REG, phy_comm0);
+	if (phy_comm1)
+		jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_1_REG, phy_comm1);
+
+	return 0;
+}
+
 static int
 jme_open(struct net_device *netdev)
 {
@@ -1769,7 +1875,8 @@ jme_open(struct net_device *netdev)
 		jme_set_settings(netdev, &jme->old_ecmd);
 	else
 		jme_reset_phy_processor(jme);
-
+	jme_phy_calibration(jme);
+	jme_phy_setEA(jme);
 	jme_reset_link(jme);
 
 	return 0;
@@ -3184,7 +3291,8 @@ jme_resume(struct device *dev)
 		jme_set_settings(netdev, &jme->old_ecmd);
 	else
 		jme_reset_phy_processor(jme);
-
+	jme_phy_calibration(jme);
+	jme_phy_setEA(jme);
 	jme_start_irq(jme);
 	netif_device_attach(netdev);
 
@@ -3239,4 +3347,3 @@ MODULE_DESCRIPTION("JMicron JMC2x0 PCI Express Ethernet driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 MODULE_DEVICE_TABLE(pci, jme_pci_tbl);
-

drivers/net/ethernet/jme.h

@@ -760,6 +760,25 @@ enum jme_rxmcs_bits {
 				  RXMCS_CHECKSUM,
 };
 
+/*	Extern PHY common register 2	*/
+
+#define PHY_GAD_TEST_MODE_1			0x00002000
+#define PHY_GAD_TEST_MODE_MSK			0x0000E000
+#define JM_PHY_SPEC_REG_READ			0x00004000
+#define JM_PHY_SPEC_REG_WRITE			0x00008000
+#define PHY_CALIBRATION_DELAY			20
+#define JM_PHY_SPEC_ADDR_REG			0x1E
+#define JM_PHY_SPEC_DATA_REG			0x1F
+
+#define JM_PHY_EXT_COMM_0_REG			0x30
+#define JM_PHY_EXT_COMM_1_REG			0x31
+#define JM_PHY_EXT_COMM_2_REG			0x32
+#define JM_PHY_EXT_COMM_2_CALI_ENABLE		0x01
+#define JM_PHY_EXT_COMM_2_CALI_MODE_0		0x02
+#define JM_PHY_EXT_COMM_2_CALI_LATCH		0x10
+#define PCI_PRIV_SHARE_NICCTRL			0xF5
+#define JME_FLAG_PHYEA_ENABLE			0x2
+
 /*
  * Wakeup Frame setup interface registers
  */