My Tantillus build, with some changes and experiments:

  - Oilite bearings (replacing lm8uus and printed bushings)
  - all 5/16" rods
  - panel joints changed to 0.25" US stock (I used MDF)
  - split panels (the panels were just a bit too large for my CNC machine, so I added a joint in the middle)
  - corners for 0.25" US stock
  - corners with no tabs
  - offset spur gears (to reduce noise)

Tantillus

Introducing Tantillus. The portable self replicating mini printer.

Please visit www.Tantillus.org for more information

** Please note these files may change without notice **

If you find mistakes or convert it to metric please file a bug report here on GitHub or even better a pull request.

- Derived parts: -
	4   -   Triffidhunter's Printable LM8uu v3 bushings http://www.thingiverse.com/thing:16813

- One piece case (200mm x 200mm x 300mm) -
	1   -   Tantillus.0.2.0.stl

NOTE: See image folder for exploded view of printed case.

- Printed Case files: -

	- Printed case source: -
	Tantillus.0.1.1.blend
	Tantillus.0.1.1_ABS.blend

       1   -   Case top 1
       1   -   Case top 2
       1   -   Case top 3
       1   -   Case top 4
       1   -   Case middle 1
       1   -   Case middle 2
       1   -   Case middle 3
       1   -   Case middle 4
       1   -   Case bottom 1
       1   -   Case bottom 2
       1   -   Case bottom 3
       1   -   Case bottom 4

- Printed case connectors: -

       1   -   Top front connector
       2   -   Top side connectors
       1   -   Rear lower connector
       1   -   Rear upper connector
       3   -   Middle connectors
       3   -   Base connectors
       1   -   Motor mount reinforcement
       4   -   Upper stiffeners

NOTE: Assembled and exploded view stl files are for reference only.


- Axis Parts: -

	1  -  Bowden clamp.stl
	1  -  Carriage bottom.stl
	1  -  Carriage top.stl
	1  -  Endstop_holder.stl
	4  -  Printable-lm8uu-v3.stl
	2  -  XY_end_left.stl
	2  -  XY_end_right.stl
	1  -  Z_arm_1.stl
	1  -  Z_arm_2.stl
	2  -  Z-coupler.stl
	1  -  Z_lift.stl
	1  -  Z_lower_bracket.stl
	1  -  Z_motor_bracket.stl
	1  -  Z_upper_bracket.stl


- Extruder: -

	1  -  Extruder.stl
	1  -  Extruder_idler.stl
	1  -  Extruder_motor_mount_v2.stl 


- Gears: - 

NOTE: 4mm and 5mm denote motor shaft size (use only one size)

	2  -  Upper gear.stl
	2  -  Motor_gear_(4mm).stl
	or
	2  -  Motor_gear_(5mm).stl

NOTE: Two sets of gears included for the extruder. 
The Herringbone gears are hard to print and need a highly calibrated machine to do so.

	1  -  Extruder_large_v2.stl 		(normal gears 2.7:1)
	1  -  Extruder_small_v2_(4mm).stl	(normal gears 2.7:1)
	or
	1  -  Extruder_small_v2_(5mm).stl	(normal gears 2.7:1)

	OR

	1  -  Extruder_large.stl	(Herringbone gears 3.3:1 (very hard to print)
	1  -  Extruder_small_(4mm).stl	(Herringbone gears 3.3:1 (very hard to print)
	or
	1  -  Extruder_small_(5mm).stl	(Herringbone gears 3.3:1 (very hard to print)


- Laser cut case files: - 

NOTE: STL's are used to produce the DXF's and SVG's and are not for printing.

	All_panels.dxf
	All_panels.stl
	All_panels.svg
	
	Back.dxf
	Back.stl
	Back.svg

	Carriage_middle.dxf
	Carriage_middle.stl
	Carriage_middle.svg

	Front.dxf
	Front.stl
	Front.svg

	Left.dxf
	Left.stl
	Left.svg

	Right.dxf
	Right.stl
	Right.svg

NOTE: Cutting test to confirm fit of tabs and bearings

	Test.dxf
	Test.svg
	test.stl

NOTE: Scad file used to make DXF's from STL's (Inkscape used to convert DXF's to SVG's)

	V3_svg.scad

- Laser cut case corners -

	4  -  Corner_bottom.stl
	1  -  Corner_top_front_left.stl
	1  -  Corner_top_front_right.stl
	1  -  Corner_top_rear_left.stl
	1  -  Corner_top_rear_right.stl

- Extras -

NOTE: Not all of these are used for each machine choose wisely
(LC) = Laser cut

	40mm_fanmount_(LC).stl
	50mm_fanmount_(LC).stl
	40mm_Fan_mount_(printed case).stl
	Encoder_knob.stl
	40mm_Fan_duct.stl
	Plug_adapter.stl
	Repraper_spool_a.stl
	Repraper_spool_b.stl
	Spool_holder.stl 	(Esun style spool)
	Spool_holder_long.stl 	(Makerbot spool)
	Spool_holder_mount.stl	(Fits both Esun and Makerbot spool holder)

- Source files -

	Tantillus.0.3.4.blend (laser cut case and all axis parts)

	40mm_Fan_duct.blend
	All_Fanmounts.blend
	Extruder_gears_v2.blend
	Plug_adapter.blend
	Spool_holders.blend
	Tantillus_extruder.blend
	Tantillus_gears.blend