Process completed with exit code 1.

pack expansion contains parameter pack '_UTypes' that has a different length (1 vs. 3) from outer parameter packs

pack expansion contains parameter pack '_UTypes' that has a different length (1 vs. 3) from outer parameter packs

pack expansion contains parameter pack '_UTypes' that has a different length (1 vs. 2) from outer parameter packs

pack expansion contains parameter pack '_UTypes' that has a different length (1 vs. 2) from outer parameter packs

Process completed with exit code 2.

Process completed with exit code 1.

Process completed with exit code 1.

pack expansion contains parameter pack '_UTypes' that has a different length (1 vs. 3) from outer parameter packs

pack expansion contains parameter pack '_UTypes' that has a different length (1 vs. 3) from outer parameter packs

pack expansion contains parameter pack '_UTypes' that has a different length (1 vs. 2) from outer parameter packs

pack expansion contains parameter pack '_UTypes' that has a different length (1 vs. 2) from outer parameter packs

Process completed with exit code 2.

pack expansion contains parameter pack '_UTypes' that has a different length (1 vs. 3) from outer parameter packs

pack expansion contains parameter pack '_UTypes' that has a different length (1 vs. 3) from outer parameter packs

pack expansion contains parameter pack '_UTypes' that has a different length (1 vs. 2) from outer parameter packs

pack expansion contains parameter pack '_UTypes' that has a different length (1 vs. 2) from outer parameter packs

Process completed with exit code 2.

pack expansion contains parameter pack '_UTypes' that has a different length (1 vs. 3) from outer parameter packs

pack expansion contains parameter pack '_UTypes' that has a different length (1 vs. 3) from outer parameter packs

pack expansion contains parameter pack '_UTypes' that has a different length (1 vs. 2) from outer parameter packs

pack expansion contains parameter pack '_UTypes' that has a different length (1 vs. 2) from outer parameter packs

Process completed with exit code 2.

Process completed with exit code 1.

Process completed with exit code 1.

The run was canceled by @lczech.

The operation was canceled.

The run was canceled by @lczech.

The operation was canceled.

The run was canceled by @lczech.

The operation was canceled.

The run was canceled by @lczech.

The operation was canceled.

Treating cmake as a formula. For the cask, use homebrew/cask/cmake or specify the `--cask` flag.

cmake 3.30.3 is already installed and up-to-date. To reinstall 3.30.3, run: brew reinstall cmake

autoconf 2.72 is already installed and up-to-date. To reinstall 2.72, run: brew reinstall autoconf

libomp 18.1.8 is already installed and up-to-date. To reinstall 18.1.8, run: brew reinstall libomp

You are using macOS 12. We (and Apple) do not provide support for this old version. It is expected behaviour that some formulae will fail to build in this old version. It is expected behaviour that Homebrew will be buggy and slow. Do not create any issues about this on Homebrew's GitHub repositories. Do not create any issues even if you think this message is unrelated. Any opened issues will be immediately closed without response. Do not ask for help from Homebrew or its maintainers on social media. You may ask for help in Homebrew's discussions but are unlikely to receive a response. Try to figure out the problem yourself and submit a fix as a pull request. We will review it but may or may not accept it.

You are using macOS 12. We (and Apple) do not provide support for this old version. It is expected behaviour that some formulae will fail to build in this old version. It is expected behaviour that Homebrew will be buggy and slow. Do not create any issues about this on Homebrew's GitHub repositories. Do not create any issues even if you think this message is unrelated. Any opened issues will be immediately closed without response. Do not ask for help from Homebrew or its maintainers on social media. You may ask for help in Homebrew's discussions but are unlikely to receive a response. Try to figure out the problem yourself and submit a fix as a pull request. We will review it but may or may not accept it.

Failed to add apt key via server keyserver.ubuntu.com: Error: Command failed with exit code 2: sudo 'gpg' '--no-default-keyring' '--keyring' 'gnupg-ring:/etc/apt/trusted.gpg.d/setup-cpp-ubuntu-archive.gpg' '--keyserver' 'keyserver.ubuntu.com' '--recv-keys' '3B4FE6ACC0B21F32'

You are using macOS 12. We (and Apple) do not provide support for this old version. It is expected behaviour that some formulae will fail to build in this old version. It is expected behaviour that Homebrew will be buggy and slow. Do not create any issues about this on Homebrew's GitHub repositories. Do not create any issues even if you think this message is unrelated. Any opened issues will be immediately closed without response. Do not ask for help from Homebrew or its maintainers on social media. You may ask for help in Homebrew's discussions but are unlikely to receive a response. Try to figure out the problem yourself and submit a fix as a pull request. We will review it but may or may not accept it.

You are using macOS 12. We (and Apple) do not provide support for this old version. It is expected behaviour that some formulae will fail to build in this old version. It is expected behaviour that Homebrew will be buggy and slow. Do not create any issues about this on Homebrew's GitHub repositories. Do not create any issues even if you think this message is unrelated. Any opened issues will be immediately closed without response. Do not ask for help from Homebrew or its maintainers on social media. You may ask for help in Homebrew's discussions but are unlikely to receive a response. Try to figure out the problem yourself and submit a fix as a pull request. We will review it but may or may not accept it.

autoconf 2.72 is already installed and up-to-date. To reinstall 2.72, run: brew reinstall autoconf

libomp 18.1.8 is already installed and up-to-date. To reinstall 18.1.8, run: brew reinstall libomp

You are using macOS 12. We (and Apple) do not provide support for this old version. It is expected behaviour that some formulae will fail to build in this old version. It is expected behaviour that Homebrew will be buggy and slow. Do not create any issues about this on Homebrew's GitHub repositories. Do not create any issues even if you think this message is unrelated. Any opened issues will be immediately closed without response. Do not ask for help from Homebrew or its maintainers on social media. You may ask for help in Homebrew's discussions but are unlikely to receive a response. Try to figure out the problem yourself and submit a fix as a pull request. We will review it but may or may not accept it.

You are using macOS 12. We (and Apple) do not provide support for this old version. It is expected behaviour that some formulae will fail to build in this old version. It is expected behaviour that Homebrew will be buggy and slow. Do not create any issues about this on Homebrew's GitHub repositories. Do not create any issues even if you think this message is unrelated. Any opened issues will be immediately closed without response. Do not ask for help from Homebrew or its maintainers on social media. You may ask for help in Homebrew's discussions but are unlikely to receive a response. Try to figure out the problem yourself and submit a fix as a pull request. We will review it but may or may not accept it.

Falling back to LLVM version 17.0.6 -ubuntu-22.04 for the Ubuntu.

autoconf 2.72 is already installed and up-to-date. To reinstall 2.72, run: brew reinstall autoconf

libomp 18.1.8 is already installed and up-to-date. To reinstall 18.1.8, run: brew reinstall libomp

You are using macOS 12. We (and Apple) do not provide support for this old version. It is expected behaviour that some formulae will fail to build in this old version. It is expected behaviour that Homebrew will be buggy and slow. Do not create any issues about this on Homebrew's GitHub repositories. Do not create any issues even if you think this message is unrelated. Any opened issues will be immediately closed without response. Do not ask for help from Homebrew or its maintainers on social media. You may ask for help in Homebrew's discussions but are unlikely to receive a response. Try to figure out the problem yourself and submit a fix as a pull request. We will review it but may or may not accept it.

You are using macOS 12. We (and Apple) do not provide support for this old version. It is expected behaviour that some formulae will fail to build in this old version. It is expected behaviour that Homebrew will be buggy and slow. Do not create any issues about this on Homebrew's GitHub repositories. Do not create any issues even if you think this message is unrelated. Any opened issues will be immediately closed without response. Do not ask for help from Homebrew or its maintainers on social media. You may ask for help in Homebrew's discussions but are unlikely to receive a response. Try to figure out the problem yourself and submit a fix as a pull request. We will review it but may or may not accept it.

You are using macOS 12. We (and Apple) do not provide support for this old version. It is expected behaviour that some formulae will fail to build in this old version. It is expected behaviour that Homebrew will be buggy and slow. Do not create any issues about this on Homebrew's GitHub repositories. Do not create any issues even if you think this message is unrelated. Any opened issues will be immediately closed without response. Do not ask for help from Homebrew or its maintainers on social media. You may ask for help in Homebrew's discussions but are unlikely to receive a response. Try to figure out the problem yourself and submit a fix as a pull request. We will review it but may or may not accept it.

You are using macOS 12. We (and Apple) do not provide support for this old version. It is expected behaviour that some formulae will fail to build in this old version. It is expected behaviour that Homebrew will be buggy and slow. Do not create any issues about this on Homebrew's GitHub repositories. Do not create any issues even if you think this message is unrelated. Any opened issues will be immediately closed without response. Do not ask for help from Homebrew or its maintainers on social media. You may ask for help in Homebrew's discussions but are unlikely to receive a response. Try to figure out the problem yourself and submit a fix as a pull request. We will review it but may or may not accept it.

You are using macOS 12. We (and Apple) do not provide support for this old version. It is expected behaviour that some formulae will fail to build in this old version. It is expected behaviour that Homebrew will be buggy and slow. Do not create any issues about this on Homebrew's GitHub repositories. Do not create any issues even if you think this message is unrelated. Any opened issues will be immediately closed without response. Do not ask for help from Homebrew or its maintainers on social media. You may ask for help in Homebrew's discussions but are unlikely to receive a response. Try to figure out the problem yourself and submit a fix as a pull request. We will review it but may or may not accept it.

gcc@12 12.4.0 is already installed and up-to-date. To reinstall 12.4.0, run: brew reinstall gcc@12

autoconf 2.72 is already installed and up-to-date. To reinstall 2.72, run: brew reinstall autoconf

libomp 18.1.8 is already installed and up-to-date. To reinstall 18.1.8, run: brew reinstall libomp

You are using macOS 12. We (and Apple) do not provide support for this old version. It is expected behaviour that some formulae will fail to build in this old version. It is expected behaviour that Homebrew will be buggy and slow. Do not create any issues about this on Homebrew's GitHub repositories. Do not create any issues even if you think this message is unrelated. Any opened issues will be immediately closed without response. Do not ask for help from Homebrew or its maintainers on social media. You may ask for help in Homebrew's discussions but are unlikely to receive a response. Try to figure out the problem yourself and submit a fix as a pull request. We will review it but may or may not accept it.

You are using macOS 12. We (and Apple) do not provide support for this old version. It is expected behaviour that some formulae will fail to build in this old version. It is expected behaviour that Homebrew will be buggy and slow. Do not create any issues about this on Homebrew's GitHub repositories. Do not create any issues even if you think this message is unrelated. Any opened issues will be immediately closed without response. Do not ask for help from Homebrew or its maintainers on social media. You may ask for help in Homebrew's discussions but are unlikely to receive a response. Try to figure out the problem yourself and submit a fix as a pull request. We will review it but may or may not accept it.

Treating cmake as a formula. For the cask, use homebrew/cask/cmake or specify the `--cask` flag.

cmake 3.30.3 is already installed and up-to-date. To reinstall 3.30.3, run: brew reinstall cmake

autoconf 2.72 is already installed and up-to-date. To reinstall 2.72, run: brew reinstall autoconf

autoconf 2.72 is already installed and up-to-date. To reinstall 2.72, run: brew reinstall autoconf

libomp 18.1.8 is already installed and up-to-date. To reinstall 18.1.8, run: brew reinstall libomp

gcc 14.2.0 is already installed and up-to-date. To reinstall 14.2.0, run: brew reinstall gcc

Failed to add apt key via server keyserver.ubuntu.com: Error: Command failed with exit code 2: sudo 'gpg' '--no-default-keyring' '--keyring' 'gnupg-ring:/etc/apt/trusted.gpg.d/launchpad-toolchain.gpg' '--keyserver' 'keyserver.ubuntu.com' '--recv-keys' '1E9377A2BA9EF27F'

Treating cmake as a formula. For the cask, use homebrew/cask/cmake or specify the `--cask` flag.

cmake 3.30.3 is already installed and up-to-date. To reinstall 3.30.3, run: brew reinstall cmake

Treating cmake as a formula. For the cask, use homebrew/cask/cmake or specify the `--cask` flag.

cmake 3.30.3 is already installed and up-to-date. To reinstall 3.30.3, run: brew reinstall cmake

No files were found with the provided path: ./build/**/*.log ./test/out. No artifacts will be uploaded.

autoconf 2.72 is already installed and up-to-date. To reinstall 2.72, run: brew reinstall autoconf

libomp 18.1.8 is already installed and up-to-date. To reinstall 18.1.8, run: brew reinstall libomp

autoconf 2.72 is already installed and up-to-date. To reinstall 2.72, run: brew reinstall autoconf

libomp 18.1.8 is already installed and up-to-date. To reinstall 18.1.8, run: brew reinstall libomp

autoconf 2.72 is already installed and up-to-date. To reinstall 2.72, run: brew reinstall autoconf

libomp 18.1.8 is already installed and up-to-date. To reinstall 18.1.8, run: brew reinstall libomp

No files were found with the provided path: ./build/**/*.log ./test/out. No artifacts will be uploaded.

Failed to add apt key via server keyserver.ubuntu.com: Error: Command failed with exit code 2: sudo 'gpg' '--no-default-keyring' '--keyring' 'gnupg-ring:/etc/apt/trusted.gpg.d/setup-cpp-ubuntu-archive.gpg' '--keyserver' 'keyserver.ubuntu.com' '--recv-keys' '40976EAF437D05B5'

No files were found with the provided path: ./build/**/*.log ./test/out. No artifacts will be uploaded.

Failed to add apt key via server keyserver.ubuntu.com: Error: Command failed with exit code 2: sudo 'gpg' '--no-default-keyring' '--keyring' 'gnupg-ring:/etc/apt/trusted.gpg.d/setup-cpp-ubuntu-archive.gpg' '--keyserver' 'keyserver.ubuntu.com' '--recv-keys' '40976EAF437D05B5'

No files were found with the provided path: ./build/**/*.log ./test/out. No artifacts will be uploaded.

Failed to add apt key via server keyserver.ubuntu.com: Error: Command failed with exit code 2: sudo 'gpg' '--no-default-keyring' '--keyring' 'gnupg-ring:/etc/apt/trusted.gpg.d/setup-cpp-ubuntu-archive.gpg' '--keyserver' 'keyserver.ubuntu.com' '--recv-keys' '40976EAF437D05B5'

Falling back to LLVM version 17.0.6 -ubuntu-22.04 for the Ubuntu.

Failed to add apt key via server keyserver.ubuntu.com: Error: Command failed with exit code 2: sudo 'gpg' '--no-default-keyring' '--keyring' 'gnupg-ring:/etc/apt/trusted.gpg.d/setup-cpp-ubuntu-archive.gpg' '--keyserver' 'keyserver.ubuntu.com' '--recv-keys' '40976EAF437D05B5'

autoconf 2.72 is already installed and up-to-date. To reinstall 2.72, run: brew reinstall autoconf

autoconf 2.72 is already installed and up-to-date. To reinstall 2.72, run: brew reinstall autoconf

libomp 18.1.8 is already installed and up-to-date. To reinstall 18.1.8, run: brew reinstall libomp

autoconf 2.72 is already installed and up-to-date. To reinstall 2.72, run: brew reinstall autoconf

libomp 18.1.8 is already installed and up-to-date. To reinstall 18.1.8, run: brew reinstall libomp

No files were found with the provided path: ./build/**/*.log ./test/out. No artifacts will be uploaded.

autoconf 2.72 is already installed and up-to-date. To reinstall 2.72, run: brew reinstall autoconf

autoconf 2.72 is already installed and up-to-date. To reinstall 2.72, run: brew reinstall autoconf

gcc@12 12.4.0 is already installed and up-to-date. To reinstall 12.4.0, run: brew reinstall gcc@12

autoconf 2.72 is already installed and up-to-date. To reinstall 2.72, run: brew reinstall autoconf

autoconf 2.72 is already installed and up-to-date. To reinstall 2.72, run: brew reinstall autoconf

gcc 14.2.0 is already installed and up-to-date. To reinstall 14.2.0, run: brew reinstall gcc

autoconf 2.72 is already installed and up-to-date. To reinstall 2.72, run: brew reinstall autoconf

Treating cmake as a formula. For the cask, use homebrew/cask/cmake or specify the `--cask` flag.

cmake 3.30.3 is already installed and up-to-date. To reinstall 3.30.3, run: brew reinstall cmake

No files were found with the provided path: ./build/**/*.log ./test/out. No artifacts will be uploaded.

No files were found with the provided path: ./build/**/*.log ./test/out. No artifacts will be uploaded.

autoconf 2.72 is already installed and up-to-date. To reinstall 2.72, run: brew reinstall autoconf

Treating cmake as a formula. For the cask, use homebrew/cask/cmake or specify the `--cask` flag.

cmake 3.30.3 is already installed and up-to-date. To reinstall 3.30.3, run: brew reinstall cmake

autoconf 2.72 is already installed and up-to-date. To reinstall 2.72, run: brew reinstall autoconf

No files were found with the provided path: ./build/**/*.log ./test/out. No artifacts will be uploaded.

No files were found with the provided path: ./build/**/*.log ./test/out. No artifacts will be uploaded.

No files were found with the provided path: ./build/**/*.log ./test/out. No artifacts will be uploaded.