diff --git a/.dockerignore b/.dockerignore new file mode 100644 index 00000000..da87ca41 --- /dev/null +++ b/.dockerignore @@ -0,0 +1,8 @@ +.git +.idea +.env +logs +README.md +README_EN.md +LICENSE +.github diff --git a/.env.example b/.env.example new file mode 100644 index 00000000..794d8965 --- /dev/null +++ b/.env.example @@ -0,0 +1,62 @@ +##################################################################### +# 注意事项 +# +# - 环境变量的格式为“键=值”，顶格写，注意等号两边不能有空格，值可以用单引号或者双引号引起来，不引也行（下面的特殊情况必须引起来） +# - 因为环境变量中“#”代表注释，若密码中存在“#”字符的，一定要使用单引号将整个密码引起来，否则解析会在“#”字符前截止，如果密码中存在单双引号的， +# 需要在单双引号前加“\”转义 +# - 配置多账户不可省略单引号，且多个账户和密码的格式必须是“<账户1>@<密码1>|<账户2>@<密码2>|<账户3>@<密码3>”，不要有空格，就算有程序也会给你干掉 +# e.g. MULTIPLE_ACCOUNTS='<账户1>@<密码1>|<账户2>@<密码2>|<账户3>@<密码3>' +# 注意不要省略“<>”符号，否则无法正确匹配 +# - 若你只有单个账户，只配置FREENOM_USERNAME和FREENOM_PASSWORD就够了 +# - 单账户和多账户的配置会被合并在一起读取并去重 +##################################################################### + +###################### 账户配置 Account config ######################### +# Freenom账户 Freenom Account +FREENOM_USERNAME=593198779@qq.com + +# Freenom密码 Freenom password +FREENOM_PASSWORD='' + +# 多账户支持 Support for multiple accounts +MULTIPLE_ACCOUNTS='' +###################### end 账户配置 ######################### + +###################### 通知邮件配置 Email config ######################### +# 机器人邮箱账户 Email of robot +MAIL_USERNAME=llf.push@gmail.com + +# 机器人邮箱密码（Gmail填密码，QQ邮箱或163邮箱填授权码） Password of the robot email +MAIL_PASSWORD='' + +# 用于接收通知的邮箱 Email address used to receive notifications +TO='' + +# 是否启用邮件推送功能 true：启用 false：不启用 Whether to enable email push features true: enabled false: not enabled +MAIL_ENABLE=true +###################### end 通知邮件配置 ######################### + +###################### Telegram bot ######################### +# 可选配置，通过 Telegram bot 发送通知消息 This is an optional configuration to send notification messages via Telegram bot + +# 你的chat_id，通过发送“/start”给@userinfobot可以获取自己的id Your chat_id, you can get your own id by sending "/start" to @userinfobot +TELEGRAM_CHAT_ID='' + +# 你的Telegram bot的token Token for your Telegram bot +TELEGRAM_BOT_TOKEN='' + +# 是否启用 Telegram Bot 功能 true：启用 false：不启用 Whether to enable Telegram Bot features true: enabled false: not enabled +TELEGRAM_BOT_ENABLE=false +###################### end Telegram bot ######################### + +# 通知频率 0：仅当有续期操作的时候 1：每次执行 Notification frequency 0: Only when there is a renewal operation 1: Each execution +NOTICE_FREQ=1 + +# 在 Github Actions 上运行 Run on github actions +ON_GITHUB_ACTIONS=false + +# 是否验证服务器证书 Whether to verify server certificate +VERIFY_SSL=false + +# 是否开启 Debug 模式 Whether to enable debug mode +DEBUG=false diff --git a/.github/FUNDING.yml b/.github/FUNDING.yml new file mode 100644 index 00000000..aff129b4 --- /dev/null +++ b/.github/FUNDING.yml @@ -0,0 +1,3 @@ +# These are supported funding model platforms + +custom: ["https://www.paypal.me/mybsdc", "https://s2.ax1x.com/2020/01/31/1394at.png"] diff --git a/.github/ISSUE_TEMPLATE/bug_report.md b/.github/ISSUE_TEMPLATE/bug_report.md new file mode 100644 index 00000000..d8d4dec8 --- /dev/null +++ b/.github/ISSUE_TEMPLATE/bug_report.md @@ -0,0 +1,33 @@ +--- +name: Bug report +about: 根据此模板格式提问更可能得到帮助，没有具体描述的报告将被忽略。Create a report to help us improve. +title: bug_report +labels: '' +assignees: '' + +--- + +**描述问题** +``` +A clear and concise description of what the bug is. +``` + +**重现步骤** +``` +步骤一 +``` + +**截图&日志** + +**你做了哪些尝试** +``` +描述你发现问题后做了哪些尝试，方便我快速排除某些问题，提高沟通效率。 +``` + +**环境信息** + - centos7 x64 + - php7.2 + - freenom续期脚本版本 v0.2.2 + +**额外的备注** +- Add any other context about the problem here. diff --git a/.github/ISSUE_TEMPLATE/feature_request.md b/.github/ISSUE_TEMPLATE/feature_request.md new file mode 100644 index 00000000..edefe58f --- /dev/null +++ b/.github/ISSUE_TEMPLATE/feature_request.md @@ -0,0 +1,20 @@ +--- +name: Feature request +about: Suggest an idea for this project +title: feature_request +labels: '' +assignees: '' + +--- + +**Is your feature request related to a problem? Please describe.** +A clear and concise description of what the problem is. Ex. I'm always frustrated when [...] + +**Describe the solution you'd like** +A clear and concise description of what you want to happen. + +**Describe alternatives you've considered** +A clear and concise description of any alternative solutions or features you've considered. + +**Additional context** +Add any other context or screenshots about the feature request here. diff --git a/.gitignore b/.gitignore new file mode 100644 index 00000000..b0bc4d35 --- /dev/null +++ b/.gitignore @@ -0,0 +1,3 @@ +.env +app/tmp/ +app/num_limit/ diff --git a/Dockerfile b/Dockerfile new file mode 100644 index 00000000..1d948a7c --- /dev/null +++ b/Dockerfile @@ -0,0 +1,21 @@ +FROM php:7.4.19-alpine3.13 + +LABEL author="mybsdc " \ + maintainer="luolongfei " + +ENV TZ Asia/Shanghai + +WORKDIR /app + +COPY . ./ + +RUN set -eux \ + && apk update \ + && apk add --no-cache tzdata bash + +VOLUME ["/conf", "/app/logs"] + +COPY docker-entrypoint.sh /usr/local/bin/ +ENTRYPOINT ["docker-entrypoint.sh"] + +CMD ["crond", "-f"] diff --git a/README.md b/README.md new file mode 100644 index 00000000..1d01096c --- /dev/null +++ b/README.md @@ -0,0 +1,545 @@ +
+

Freenom：freenom域名自动续期

+ +[![Build Status](https://img.shields.io/badge/build-passed-brightgreen?style=for-the-badge)](https://scrutinizer-ci.com/g/luolongfei/freenom/build-status/master) +[![Php Version](https://img.shields.io/badge/php-%3E=7.2-brightgreen.svg?style=for-the-badge)](https://secure.php.net/) +[![Scrutinizer Code Quality](https://img.shields.io/badge/scrutinizer-9.31-brightgreen?style=for-the-badge)](https://scrutinizer-ci.com/g/luolongfei/freenom/?branch=master) +[![MIT License](https://img.shields.io/badge/license-MIT-brightgreen.svg?style=for-the-badge)](https://github.com/luolongfei/freenom/blob/master/LICENSE) + +Documentation: [English version](https://github.com/luolongfei/freenom/blob/master/README_EN.md) | 中文版 +
+ +[📃 前言](#--前言) + +[🍭 效果](#--效果) + +[🎁 事前准备](#--事前准备) + +[📪 配置发信邮箱](#--配置发信邮箱) + +
+ +*（下面三种部署方式，选择其中一种即可）* + +[⛵ 通过 Docker 方式部署](#--方式一通过-docker-部署最简单的方式)（最简单的方式，推荐） + +[🕹 通过腾讯云函数（SCF）部署](#--方式二通过腾讯云函数scf部署) + +[🚧 直接拉取源码部署](#--方式三直接拉取源码部署) + +
+ +[📋 捐赠名单 Donate List](#--捐赠名单-donate-list) + +[❤ 捐赠 Donate](#--捐赠-donate) + +[🚁 我正在用的 VPS](#--我正在用的-VPS) + +[🍺 信仰](#--信仰) + +[🌚 作者](#--作者) + +[📰 更新日志](#--更新日志) （每次新版本发布，可以参考此日志决定是否更新） + +[🎉 鸣谢](#--鸣谢) + +[🥝 开源协议](#--开源协议) + +
注意：GitHub 官方不允许使用 GitHub Action 做签到或者续期类应用，否则会封禁项目甚至封号，故为项目能长期维护下去，应 GitHub 官方要求， +本项目已经移除 Action 方式的应用，望周知。已经 fork 使用的，可以尽快将项目转移到自己的 VPS 上，推荐通过 Docker 部署， +或者直接搬运到腾讯云函数部署。本项目依然长期维护。
+ +### 📃 前言 +众所周知，Freenom是地球上唯一一个提供免费顶级域名的商家，不过需要每年续期，每次续期最多一年。由于我申请了一堆域名，而且不是同一时段申请的， +所以每次续期都觉得折腾，于是就写了这个自动续期的脚本。 + +### 🍭 效果 +![邮件示例](https://s2.ax1x.com/2020/01/31/139Rrd.png "邮件内容") + +无论是续期成败或者脚本执行出错，都会收到的程序发出的邮件。如果是续期成败相关的邮件，邮件会包括未续期域名的到期天数等内容。 +邮件参考了微信发送的注销公众号的邮件样式。 + +### 🎁 事前准备 +- 发信邮箱：为了方便理解又称机器人邮箱，用于发送通知邮件。目前支持`Gmail`、`QQ邮箱`以及`163邮箱`，程序会自动判断发信邮箱类型并使用合适的配置。 +- 收信邮箱：用于接收机器人发出的通知邮件。推荐使用`QQ邮箱`，`QQ邮箱`唯一的好处只是收到邮件会在`QQ`弹出消息。 +- VPS：随便一台服务器都行，系统推荐`Centos7`，另外PHP版本需在`php7.2`及以上。如果你没有 VPS，可以考虑一下 [🚁 我正在用的 VPS](#--我正在用的-VPS) ，最便宜的机器`9.9美元`一年。 +- 没有了 + +### 📪 配置发信邮箱 +下面分别介绍`Gmail`、`QQ邮箱`以及`163邮箱`的设置，你只用看自己需要的部分。注意，`QQ邮箱`与`163邮箱`均使用账户加授权码的方式登录， +`谷歌邮箱`使用账户加密码的方式登录，请知悉。另外还想吐槽一下，国产邮箱你得花一毛钱给邮箱提供方发一条短信才能拿到授权码。 + +*（点击即可展开或收起）* + +
+ 设置Gmail +
+ +1、在`设置>转发和POP/IMAP`中，勾选 +- 对所有邮件启用 POP +- 启用 IMAP + +![gmail配置01](https://s2.ax1x.com/2020/01/31/13tKsg.png "gmail配置01") + +然后保存更改。 + +2、允许不够安全的应用 + +登录谷歌邮箱后，访问 [谷歌权限设置界面](https://myaccount.google.com/u/0/lesssecureapps?pli=1&pageId=none) ，启用允许不够安全的应用。 + +![gmail配置02](https://s2.ax1x.com/2020/01/31/1392KH.png "gmail配置02") + +另外，若遇到提示 +> 不允许访问账户 + +登录谷歌邮箱后，去 [gmail的这个界面](https://accounts.google.com/b/0/DisplayUnlockCaptcha) 点击允许。这种情况较为少见。 + +*** + +
+ +
+ 设置QQ邮箱 +
+ +在`设置>账户>POP3/IMAP/SMTP/Exchange/CardDAV/CalDAV服务`下，开启`POP3/SMTP服务` + +![qq邮箱配置01](https://s2.ax1x.com/2020/01/31/13cIKA.png "qq邮箱配置01") + +此时坑爹的QQ邮箱会要求你用手机发送一条短信给腾讯，发送完了点一下`我已发送` + +![qq邮箱配置02](https://s2.ax1x.com/2020/01/31/13c4vd.png "qq邮箱配置02") + +然后你就能看到你的邮箱授权码了，使用邮箱账户加授权码即可登录，记下授权码 + +![qq邮箱配置03](https://s2.ax1x.com/2020/01/31/13cTbt.png "qq邮箱配置03") + +![qq邮箱配置04](https://s2.ax1x.com/2020/01/31/13coDI.png "qq邮箱配置04") + +*** + +
+ +
+ 设置163邮箱 +
+ +在`设置>POP3/SMTP/IMAP`下，开启`POP3/SMTP服务`和`IMAP/SMTP服务`并保存 + +![163邮箱配置01](https://s2.ax1x.com/2020/01/31/13WKZn.png "163邮箱配置01") + +![163邮箱配置02](https://s2.ax1x.com/2020/01/31/13WQI0.png "163邮箱配置02") + +现在点击侧边栏的`客户端授权密码`，并获取授权码，你看到画面可能和我不一样，因为我已经获取了授权码，所以只有`重置授权码`按钮，这里自己根据网站提示申请获取授权码，网易和腾讯一样恶心，需要你用手机给它发一条短信才能拿到授权码 + +![163邮箱配置03](https://s2.ax1x.com/2020/01/31/13WMaq.png "163邮箱配置03") + +163 邮箱送信后，接收方如果没收到可以在垃圾邮件里面找一下。 + +*** + +
+ +#### Telegram bot + +上面介绍了三种邮箱的设置方法，如果你不想使用邮件推送，也可以使用 Telegram bot，灵活配置。在`.env`文件中， +将`TELEGRAM_BOT_ENABLE`的值改为`true`，即可启用 Telegram bot，同样的，将`MAIL_ENABLE`的值改为`false`即可关闭邮件推送方式。 +Telegram bot 有两个配置项，一个是`chatID`（对应`.env`文件中的`TELEGRAM_CHAT_ID`）， +通过使用你的 Telegram 账户发送`/start`给`@userinfobot`即可以获取自己的id， +另一个是`token`（对应`.env`文件中的`TELEGRAM_BOT_TOKEN`），你的 Telegram bot 令牌，你会创建 Telegram bot 就知道怎么获取， +不多赘述。如何创建一个 Telegram bot 请参考：[官方文档](https://core.telegram.org/bots#6-botfather) + +*** + +*与通知相关的设置到此就完成了，下面开始讲本项目的三种使用方式，一种是通过 Docker，另一种是通过腾讯云函数，再一种是直接拉取源码部署，推荐使用 Docker 方式，无需纠结环境。* + +### ⛵ 方式一：通过 Docker 部署（最简单的方式） + +
+ +Docker 仓库地址为： [https://hub.docker.com/r/luolongfei/freenom](https://hub.docker.com/r/luolongfei/freenom) ，同样欢迎 star 。 +此镜像支持的架构为`linux/amd64`，`linux/arm64`，`linux/ppc64le`，`linux/s390x`，`linux/386`，`linux/arm/v7`，`linux/arm/v6`， +理论上支持`群晖`、`威联通`、`树莓派`以及各种类型的`VPS`。 + +#### 1、安装 Docker + +##### 1.1 以 root 用户登录，执行一键脚本安装 Docker + +升级源并安装软件（下面两行命令二选一，根据你自己的系统） + +Debian / Ubuntu +```shell +apt-get update && apt-get install -y wget vim +``` +CentOS +```shell +yum update && yum install -y wget vim +``` + +执行此命令等候自动安装 Docker +```shell +wget -qO- get.docker.com | bash +``` + +说明：请使用 KVM 架构的 VPS，OpenVZ 架构的 VPS 不支持安装 Docker，另外 CentOS 8 不支持用此脚本来安装 Docker。 +更多关于 Docker 安装的内容参考 [Docker 官方安装指南](https://docs.docker.com/engine/install/) 。 + +##### 1.2 对 Docker 的一些命令操作 + +查看 Docker 安装版本等信息 +```shell +docker version +``` + +启动 Docker 服务 +```shell +systemctl start docker +``` + +查看 Docker 运行状态 +```shell +systemctl status docker +``` + +将 Docker 服务加入开机自启动 +```shell +systemctl enable docker +``` + +#### 2、通过 Docker 部署域名续期脚本 + +##### 2.1 用 Docker 创建并启动容器 + +命令如下 +```shell +docker run -d --name freenom --restart always -v $(pwd):/conf -v $(pwd)/logs:/app/logs luolongfei/freenom +``` +或者，如果你想自定义脚本执行时间，则命令如下 +```shell +docker run -d --name freenom --restart always -v $(pwd):/conf -v $(pwd)/logs:/app/logs -e RUN_AT="11:24" luolongfei/freenom +``` + 上面这条命令只比上上条命令多了个` -e RUN_AT="11:24"`，其中`11:24`表示在北京时间每天的 11:24 执行续期任务，你可以自定义这个时间。 + 这里的`RUN_AT`参数同时也支持 CRON 命令里的时间形式，比如，` -e RUN_AT="9 11 * * *"`，表示每天北京时间 11:09 执行续期任务， + 如果你不想每天执行任务，只想隔几天执行，只用修改`RUN_AT`的值即可。 + + **注意：不推荐自定义脚本执行时间。因为你可能跟很多人定义的是同一个时间点，这样可能导致所有人都是同一时间向 Freenom 的服务器发起请求， + 使得 Freenom 无法稳定提供服务。而如果你不自定义时间，程序会自动指定北京时间 06 ~ 23 点全时段随机的一个时间点作为执行时间， + 每次重启容器都会自动重新指定。** + +
+ 点我查看上方 Docker 命令的参数解释 +
+ +| 命令 | 含义 | +| :--- | :--- | +| docker run | 开始运行一个容器 | +| -d 参数 | 容器以后台运行并输出容器 ID | +| --name 参数 | 给容器分配一个识别符，方便将来的启动，停止，删除等操作 | +| --restart 参数 | 配置容器启动类型，always 即为 docker 服务重新启动时自动启动本容器 | +| -v 参数 | 挂载卷（volume），冒号后面是容器的路径，冒号前面是宿主机的路径（只支持绝对路径），`$(pwd)`表示当前目录 | +| -e 参数 | 指定容器中的环境变量 | +| luolongfei/freenom | 这是从 docker hub 下载回来的镜像完整路径名 | + +
+ +至此，你的自动续期容器就跑起来了，执行`ls -a`后你就可以看到在你的当前目录下，有一个`.env`文件和一个`logs`目录，`logs`目录里面存放的是程序日志， +而`.env`则是配置文件，现在直接执行`vim .env`将`.env`文件里的所有配置项改为你自己的并保存即可。然后重启容器，如果配置正确的话，便很快可以收到相关邮件。 + +
+ 点我查看 .env 文件中部分配置项的含义 +
+ +| 变量名 | 含义 | 默认值 | 是否必须 | 备注 | +| :---: | :---: | :---: | :---: | :---: | +| FREENOM_USERNAME | Freenom 账户 | - | 是 | 只支持邮箱账户，如果你是使用第三方社交账户登录的用户，请在 Freenom 管理页面绑定邮箱，绑定后即可使用邮箱账户登录 | +| FREENOM_PASSWORD | Freenom 密码 | - | 是 | 某些特殊字符可能需要转义，详见`.env`文件内注释 | +| MULTIPLE_ACCOUNTS | 多账户支持 | - | 否 | 多个账户和密码的格式必须是“`<账户1>@<密码1>\|<账户2>@<密码2>\|<账户3>@<密码3>`”，注意不要省略“<>”符号，否则无法正确匹配。如果设置了多账户，上面的`FREENOM_USERNAME`和`FREENOM_PASSWORD`可不设置 | +| MAIL_USERNAME | 机器人邮箱账户 | - | 是 | 支持`Gmail`、`QQ邮箱`以及`163邮箱`，尽可能使用`163邮箱`或者`QQ邮箱`而非`Gmail`。因为谷歌的安全机制，每次在新设备登录 `Gmail` 都会先被限制，需要手动解除限制才行。具体的配置方法参考「 [配置发信邮箱](#--配置发信邮箱) 」 | +| MAIL_PASSWORD | 机器人邮箱密码 | - | 是 | `Gmail`填密码，`QQ邮箱`或`163邮箱`填授权码 | +| TO | 接收通知的邮箱 | - | 是 | 你自己最常用的邮箱，推荐使用`QQ邮箱`，用来接收机器人邮箱发出的域名相关邮件 | +| MAIL_ENABLE | 是否启用邮件推送功能 | true | 否 | `true`：启用
`false`：不启用
默认启用，如果设为`false`，不启用邮件推送功能，则上面的`MAIL_USERNAME`、`MAIL_PASSWORD`、`TO`变量变为非必须，可不设置 | +| TELEGRAM_CHAT_ID | 你的`chat_id` | - | 否 | 通过发送`/start`给`@userinfobot`可以获取自己的`id` | +| TELEGRAM_BOT_TOKEN | 你的`Telegram bot`的`token` | - | 否 || +| TELEGRAM_BOT_ENABLE | 是否启用`Telegram Bot`推送功能 | false | 否 | `true`：启用
`false`：不启用
默认不启用，如果设为`true`，则必须设置上面的`TELEGRAM_CHAT_ID`和`TELEGRAM_BOT_TOKEN`变量 | +| NOTICE_FREQ | 通知频率 | 1 | 否 | `0`：仅当有续期操作的时候
`1`：每次执行 | + +*更多配置项含义，请参考`.env`文件中的注释。* + +
+ +> 如何验证你的配置是否正确呢？ +> + +修改并保存`.env`文件后，执行`docker restart freenom`重启容器，等待 5 秒钟左右，然后执行`docker logs freenom`查看输出内容， +观察输出内容中有`执行成功`字样，则表示配置无误。如果你还来不及配置送信邮箱等内容，可先停用邮件功能。 + +##### 2.2 后期容器处理常用命令 + +查看容器在线状态及大小 +```shell +docker ps -as +``` + +查看容器的运行输出日志 +```shell +docker logs freenom +``` + +重新启动容器 +```shell +docker restart freenom +``` + +停止容器的运行 +```shell +docker stop freenom +``` + +移除容器 +```shell +docker rm $name +``` + +查看 docker 容器占用 CPU，内存等信息 +```shell +docker stats --no-stream +``` + +*有关容器部署的内容结束。* + +### 🕹 方式二：通过腾讯云函数（SCF）部署 + +
+ +#### 1、下载 SCF 版本的压缩包 + +此版本为特别版，支持通过腾讯云函数部署，与主分支版本不兼容，版本号为`v0.3_scf`，下载地址： +[https://github.com/luolongfei/freenom/archive/refs/tags/v0.3_scf.zip](https://github.com/luolongfei/freenom/archive/refs/tags/v0.3_scf.zip) + +下载后解压到你能找到的任意目录，你将得到一个文件夹，后期将通过文件夹的形式上传到腾讯云函数。 + +#### 2、创建腾讯云函数 + +直接访问腾讯云函数控制台创建云函数： [https://console.cloud.tencent.com/scf/list-create](https://console.cloud.tencent.com/scf/list-create) ， +按照下图所示的说明进行创建。如果无法看清图片，可访问： [https://github.com/luolongfei/freenom/blob/master/resources/screenshot/scf.png](https://github.com/luolongfei/freenom/blob/master/resources/screenshot/scf.png) +或者 [https://z3.ax1x.com/2021/06/01/2nKCF0.png](https://z3.ax1x.com/2021/06/01/2nKCF0.png) 查看原图。 + +[![scf01](https://z3.ax1x.com/2021/06/01/2nKCF0.png)](https://imgtu.com/i/2nKCF0) + +按照上图所示部署完成后，可以点击云函数的名称进入云函数管理画面，管理画面往下翻可看到`部署`与`测试`按钮，点击`测试`，稍等几秒钟，即可看到输出日志， +根据输出日志判断配置以及部署是否正确。 + +[![scf02](https://z3.ax1x.com/2021/06/01/2nGZ3q.png)](https://imgtu.com/i/2nGZ3q) + +*有关腾讯云函数部署的内容结束。* + +### 🚧 方式三：直接拉取源码部署 + +
+ +所有操作均在Centos7系统下进行，其它Linux发行版大同小异 +#### 1、获取源码 +创建文件夹 +```shell script +mkdir -p /data/wwwroot/freenom && cd /data/wwwroot/freenom +``` +clone 本仓库源码 +```shell script +git clone https://github.com/luolongfei/freenom.git ./ +``` + +#### 2、修改配置 +复制配置文件模板 +```shell script +cp .env.example .env +``` +编辑配置文件 +```shell script +vim .env +``` +```shell script +# 注意事项 +# .env 文件里每个项目都有详细的说明，这里不再赘述，简言之，你需要把里面所有项都改成你自己的。需要注意的是多账户配置的格式： +# e.g. MULTIPLE_ACCOUNTS='<账户1>@<密码1>|<账户2>@<密码2>|<账户3>@<密码3>' +# （注意不要省略“<>”符号，否则无法正确匹配） +# 当然，若你只有单个账户，只配置 FREENOM_USERNAME 和 FREENOM_PASSWORD 就够了，单账户和多账户的配置会被合并在一起读取并去重。 + +# 编辑完成后，按“Esc”回到命令模式，输入“:wq”回车即保存并退出，不会用 vim 编辑器的可以谷歌一下:) +``` + +#### 3、添加计划任务 + +##### 3.1 安装 crontabs 以及 cronie +```shell script +yum -y install cronie crontabs +``` +验证 crond 是否安装及启动 +```shell script +yum list cronie && systemctl status crond +``` +验证crontab是否安装 +```shell script +yum list crontabs $$ which crontab && crontab -l +``` + +##### 3.2 打开任务表单，并编辑 +```shell script +crontab -e +``` +```shell script +# 任务内容如下 +# 此任务的含义是在每天早上 9点 执行 /data/wwwroot/freenom/ 路径下的 run 文件，最佳实践是将这个时间修改为一个非整点的时间，防止与很多人在同一时间进行续期操作导致 freenom 无法稳定提供服务 +# 注意：某些情况下，crontab 可能找不到你的 php 路径，下面的命令执行后会在 freenom_crontab.log 文件输出错误信息，你应该指定 php 路径：把下面的 php 替换为 /usr/local/php/bin/php （根据实际情况，执行 whereis php 即可看到 php 执行文件的真实路径） +00 09 * * * cd /data/wwwroot/freenom/ && php run > freenom_crontab.log 2>&1 +``` + +##### 3.3 重启crond守护进程（每次编辑任务表单后都需此步，以使任务生效） +```shell script +systemctl restart crond +``` +若要检查`计划任务`是否正常，你可以将上面的任务执行时间设置在几分钟后，然后等到任务执行完成， +检查`/data/wwwroot/freenom/`目录下的`freenom_crontab.log`文件内容，是否有报错信息。常见的错误信息如下： +- /bin/sh: php: command not found +- /bin/sh: /usr/local/php: Is a directory + +*（点击即可展开或收起）* +
+ 解决方案 +
+ +> +> 执行 +> ```shell script +> whereis php +> ``` +> ```shell script +> # 上面的命令可确定 php 执行文件的位置，一般输出为“php: /usr/local/php /usr/local/php/bin/php”，选长的那个即：/usr/local/php/bin/php +> ``` +> +> 现在我们知道 php 执行文件的路径是`/usr/local/php/bin/php`（根据你自己系统的实际情况，可能不同），然后修改表单任务里的命令，把 +> +> `00 09 * * * cd /data/wwwroot/freenom/ && php run > freenom_crontab.log 2>&1` +> +> 改为 +> +> `00 09 * * * cd /data/wwwroot/freenom/ && /usr/local/php/bin/php run > freenom_crontab.log 2>&1` +> +> 更多参考：[点这里](https://stackoverflow.com/questions/7397469/why-is-crontab-not-executing-my-php-script) +> + +
+ +当然，如果你的`计划任务`能正确找到`php路径`，没有错误，那你什么也不用做。 + +*至此，所有的配置都已经完成，下面我们验证一下整个流程是否走通。* + +##### 3.4 验证 +你可以先将`.env`中的`NOTICE_FREQ`的值改为1（即每次执行都推送通知），然后执行 +```shell script +cd /data/wwwroot/freenom/ && php run +``` +不出意外的话，你将收到一封关于域名情况的邮件。 + +*** + +遇到任何问题或 Bug 欢迎提 [issue](https://github.com/luolongfei/freenom/issues) （请按模板格式提`issue`，以便我快速复现你的问题，否则问题会被忽略）， +如果`Freenom`改变算法导致此项目失效，请提 [issue](https://github.com/luolongfei/freenom/issues) 告知，我会及时修复，本项目长期维护。 +欢迎`star`~ + +### 📋 捐赠名单 Donate List +非常感谢「 [这些用户](https://github.com/luolongfei/freenom/wiki/Donate-List) 」对本项目的捐赠支持！ + +### ❤ 捐赠 Donate +如果你觉得本项目真的有帮助到你并且想回馈作者，感谢你的捐赠。 +#### PayPal: [https://www.paypal.me/mybsdc](https://www.paypal.me/mybsdc) +> Every time you spend money, you're casting a vote for the kind of world you want. -- Anna Lappe + +![pay](https://s2.ax1x.com/2020/01/31/1394at.png "Donate") + +![每一次你花的钱都是在为你想要的世界投票。](https://s2.ax1x.com/2020/01/31/13P8cF.jpg) + +**你的 star 或者`小额打赏`是我长期维护此项目的动力所在，由衷感谢每一位支持者，“每一次你花的钱都是在为你想要的世界投票”。 +另外，将本项目推荐给更多的人，也是一种支持的方式，用的人越多更新的动力越足。** + +### 🚁 我正在用的 VPS + +走我的 Aff 地址购买，我可以获得一点返利，也算是一种支持方式，介意者复制官网地址访问即可。 + +| 名称 | 购买地址 | 备注 | +| :---: | :--- | :--- | +| 搬瓦工 | [https://bwh81.net/aff.php?aff=24499&pid=104](https://bwh81.net/aff.php?aff=24499&pid=104) （日本软银 VPS 限量版，`65美元`一年，优惠码：`BWH3HYATVBJW`）
[https://bwh81.net/aff.php?aff=24499&pid=94](https://bwh81.net/aff.php?aff=24499&pid=94) （CN2 GIA LIMITED EDITION，`DC 6`机房，`46.8美元`一年）
[https://bwh81.net/aff.php?aff=24499&pid=71](https://bwh81.net/aff.php?aff=24499&pid=71) （CN2 GIA 丐版，`DC 9`机房，`37.79美元`一年） | 稳定大厂，它们家`限量版 GIA`很香。目前是我的主力机型。 | +| Vultr | [https://www.vultr.com/?ref=7429134](https://www.vultr.com/?ref=7429134) （最低`2.5美元`每月）
[https://www.vultr.com/?ref=8399703-6G](https://www.vultr.com/?ref=8399703-6G) （新用户可得`100美元`体验金） | 随开随停，很方便。 | +| PacificRack | [https://pacificrack.com/portal/aff.php?aff=1150&pid=11](https://pacificrack.com/portal/aff.php?aff=1150&pid=11) （`9.9美元`一年） | 最便宜的机型`9.9美元`一年，QuadraNet 机房，我用了两年了目前感觉很稳。 | + +### 🍺 信仰 + +![南京市民李先生](https://s2.ax1x.com/2020/02/04/1Bm3Ps.jpg "南京市民李先生") +> +> 认真是我们参与这个社会的方式，认真是我们改变这个社会的方式。 ——李志 + +### 🌚 作者 +- 主程序以及框架：[@luolongfei](https://github.com/luolongfei) +- 英文版文档：[@肖阿姨](#) + +### 📰 更新日志 + +此处省略了很多较为久远的记录，以前的日志只记录了比较大的变更，以后的日志会尽可能详尽一些。 + +#### [Unreleased] + +##### Added + +- 支持通过 Server酱 以及 企业微信 推送通知 + +##### Changed + +- 多个账户的续期结果通知合并为同一条消息 +- 整合各种送信方式，优化相关逻辑 +- 支持交互式安装，免去手动修改配置的繁琐操作 + +#### [v0.3](https://github.com/luolongfei/freenom/releases/tag/v0.3) - 2021-05-27 + +##### Added + +- 追加 Docker 版本，支持通过 Docker 方式部署，简化部署流程 + +#### [v0.2.5](https://github.com/luolongfei/freenom/releases/tag/v0.2.5) - 2020-06-23 + +##### Added + +- 支持在 Github Actions 上执行（应 GitHub 官方要求，已移除此功能） + +#### [v0.2.2](https://github.com/luolongfei/freenom/releases/tag/v0.2.2) - 2020-02-06 + +##### Added + +- 新增通过 Telegram bot 送信 +- 各种送信方式支持单独开关 + +#### [v0.2](https://github.com/luolongfei/freenom/releases/tag/v0.2) - 2020-02-01 + +##### Added + +- 支持多个 Freenom 账户进行域名续期 + +##### Changed + +- 进行了彻底的重构，框架化 +- 优化邮箱模块，支持自动选择合适的邮箱配置 + + +*（版本在 v0.1 到 v0.2 期间代码有过很多次变更，之前没有发布版本，故此处不再赘述相关变更日志）* + +#### [v0.1](https://github.com/luolongfei/freenom/releases/tag/v0.1) - 2018-8-13 + +##### Added + +- 初版，开源，基础的续期功能 + +### 🎉 鸣谢 +- [PHPMailer](https://github.com/PHPMailer/PHPMailer/) （邮件发送功能依赖此库） +- [guzzle](https://github.com/guzzle/guzzle) （Curl库） +- [秋水逸冰](https://teddysun.com/569.html) （本项目 Docker 相关文档有参考秋水逸冰的文章） + +### 🥝 开源协议 +[MIT](https://opensource.org/licenses/mit-license.php) diff --git a/README_EN.md b/README_EN.md new file mode 100644 index 00000000..4351285f --- /dev/null +++ b/README_EN.md @@ -0,0 +1,196 @@ +
+

Freenom: freenom domain name renews automatically

+ +[![Build Status](https://img.shields.io/badge/build-passed-brightgreen?style=for-the-badge)](https://scrutinizer-ci.com/g/luolongfei/freenom/build-status/master) +[![Php Version](https://img.shields.io/badge/php-%3E=7.2-brightgreen.svg?style=for-the-badge)](https://secure.php.net/) +[![Scrutinizer Code Quality](https://img.shields.io/badge/scrutinizer-9.31-brightgreen?style=for-the-badge)](https://scrutinizer-ci.com/g/luolongfei/freenom/?branch=master) +[![MIT License](https://img.shields.io/badge/license-MIT-brightgreen.svg?style=for-the-badge)](https://github.com/luolongfei/freenom/blob/master/LICENSE) + +Documentation: English version | [中文版](https://github.com/luolongfei/freenom) +
+ +[📃 Why write this script](#--Why-write-this-script) + +[🍭 Demo](#--Demo) + +[🎁 Preparation](#--Preparation) + +[📪 Setting up Gmail](#--Setting-up-Gmail) + +[🤶 Telegram bot](#--Telegram-bot) + +[🚧 Configuration script](#--Configuration-script) + +[🎈 Add scheduled task](#--Add-scheduled-task) + +[☕ Verification](#--Verification) + +[❤ Donate](#--Donate) + +[🌚 Author](#--Author) + +[🎉 Acknowledgements](#--Acknowledgements) + +[🥝 Open source agreement](#--Open-source-agreement) + + +### 📃 Why write this script +As we all know, Freenom is the only merchant on the planet that provides free top-level domain names, but it needs to be renewed every year for up to one year at a time. Since I applied for a bunch of domain names, and not at the same time, +So I felt frustrated every time I renewed, so I wrote this automatic renewal script. + +### 🍭 Demo +![Email example](https://s2.ax1x.com/2020/01/31/139Rrd.png "Email content") + +Regardless of the success or failure of the renewal or the execution of the script, you will receive emails from the program. In the case of a renewal success or failure email, the email will include the number of days that the domain name has not been renewed. + +### 🎁 Preparation +- Email of robot: Used to send notification emails. +- Your email: Used to receive notification emails sent by robots. +- VPS: Any server can be used. The system recommends `Centos7`, and the PHP version must be` php7.1` or above. +- No more + +### 📪 Setting up Gmail +*** +1.In `Settings > Forwarding and POP/IMAP`, tick +- Enable POP for all messages +- Enable IMAP + +![gmail Configuration 01](https://s2.ax1x.com/2020/02/01/1GDsMR.png "gmail Configuration 01") + +Then save your changes. + +2.Allow less secure applications + +After logging into Google Mail, visit [this page](https://myaccount.google.com/u/0/lesssecureapps?pli=1&pageId=none) and enable the application that is not secure enough. + +Also, if prompted +> Do not allow access to account + +After logging in to Google Mail, go to [this page](https://accounts.google.com/b/0/DisplayUnlockCaptcha) and click Allow. This situation is relatively rare. + +### 🤶 Telegram bot +*** +If you don't want to use email push, you can also use Telegram bot. In the `.env` file, +Change the value of `TELEGRAM_BOT_ENABLE` to `true` to enable the Telegram bot. +Similarly, change the value of `MAIL_ENABLE` to `false` to disable the mail push method. +Telegram bot has two configuration items, one is `chatID` (corresponding to `TELEGRAM_CHAT_ID` in `.env` file), +You can get your own id by sending `/start` to `@userinfobot` using your Telegram account, +The other is `token` (corresponding to `TELEGRAM_BOT_TOKEN` in the `.env` file), +your Telegram bot token, how to create a Telegram bot and how to get the token please refer to: +[Official Document](https://core.telegram.org/bots#6-botfather) + +*This completes the settings related to notifications, followed by the configuration related to this program* :) + +### 🚧 Configuration script +All operations are performed under Centos7 system, other Linux distributions are similar +#### Get the source code +```bash +$ mkdir -p /data/wwwroot/freenom +$ cd /data/wwwroot/freenom + +# clone the repository source +$ git clone https://github.com/luolongfei/freenom.git ./ +``` + +#### Configuration process +```bash +# Copy configuration file template +$ cp .env.example .env + +# Edit configuration file +$ vim .env + +# .env Each item in the file has a detailed description, which will not be repeated here. In short, you need to change all the items in it to your own. Note the format of the multi-account configuration: +# e.g. MULTIPLE_ACCOUNTS='@|@|@' +# Of course, if you only have a single account, you only need to configure FREEENOM_USERNAME and FREEENOM_PASSWORD. The configurations of single account and multiple accounts will be read together and duplicated. + +# After editing, press "Esc" to return to the command mode, enter ":wq" and press Enter to save and exit. If you don't use vim editor, you can ask Uncle Google. :) +``` + +### 🎈 Add scheduled task +#### Install crontabs and cronie +```bash +$ yum -y install cronie crontabs + +# Verify if crond is installed and started +$ yum list cronie && systemctl status crond + +# Verify that crontab is installed +$ yum list crontabs $$ which crontab && crontab -l +``` + +#### Open the task form and edit +```bash +$ crontab -e + +# Task content is as follows +# The meaning of this task is to execute the run file under /data/wwwroot/freenom/ at 9 AM every day +# Note: In some cases, crontab may not find your php path. The following command will output an error message in the freenom_crontab.log file. You should specify the php path: replace the following php with /usr/local/php/bin/php (based on the actual situation) +00 09 * * * cd /data/wwwroot/freenom/ && php run > freenom_crontab.log 2>&1 +``` + +#### Restart the crond daemon (This step is required each time you edit the task form for the task to take effect) +```bash +$ systemctl restart crond +``` +To check if the `Task` is normal, you can set the execution time of the above task to a few minutes, and then wait until the task execution is completed, +check the contents of the `freenom_crontab.log` file in the `/data/wwwroot/freenom/` directory for errors. Common error messages are as follows: +- /bin/sh: php: command not found +- /bin/sh: /usr/local/php: Is a directory + +*(Click to expand or collapse)* +
+ solution +
+ +> +> execute +> ```bash +> $ whereis php +> # Determine the location of php, the general output is "php: /usr/local/php /usr/local/php/bin/php", we choose: /usr/local/php/bin/php +> ``` +> Now we know that php's path is `/usr/local/php/bin/php` (may be different according to the actual situation of your own system), +> and then modify the commands in the form task, change +> +> `00 09 * * * cd /data/wwwroot/freenom/ && php run > freenom_crontab.log 2>&1` +> +> to +> +> `00 09 * * * cd /data/wwwroot/freenom/ && /usr/local/php/bin/php run > freenom_crontab.log 2>&1` +> +> More information: [click here](https://stackoverflow.com/questions/7397469/why-is-crontab-not-executing-my-php-script) +> + +
+ +Of course, if your `crontab` can correctly find the `php path` without error, you don't need to do anything. + +*So far, all the configurations have been completed, let's verify if the whole process works* :) + +### ☕ Verification +You can first change the value of `NOTICE_FREQ` in `.env` to 1 (Push notification every time the script is executed), and then execute +```bash +$ cd /data/wwwroot/freenom/ && php run +``` +If nothing else, you will receive an email about the domain name. + +If you encounter any problems or bugs, please mention [issues](https://github.com/luolongfei/freenom/issues). If freenom changes the algorithm and causes this project to fail, +Please mention [issues](https://github.com/luolongfei/freenom/issues) to inform me that I will fix it in time and maintain this project for a long time. Welcome star ~ + +### ❤ Donate + +#### PayPal: [https://www.paypal.me/mybsdc](https://www.paypal.me/mybsdc) +> Every time you spend money, you're casting a vote for the kind of world you want .-- Anna Lappe + +![Every time you spend your money, you are voting for the world you want. ](https://s2.ax1x.com/2020/01/31/13P8cF.jpg) + +### 🌚 Author +- Main program and framework: [@luolongfei](https://github.com/luolongfei) +- English document: [@肖阿姨](#) + +### 🎉 Acknowledgements +- [PHPMailer](https://github.com/PHPMailer/PHPMailer/) (Mail sending function depends on this library) +- [guzzle](https://github.com/guzzle/guzzle) (Curl library) + +### 🥝 Open source agreement +[MIT](https://opensource.org/licenses/mit-license.php) diff --git a/app/Console/FreeNom.php b/app/Console/FreeNom.php new file mode 100644 index 00000000..1a8c13c4 --- /dev/null +++ b/app/Console/FreeNom.php @@ -0,0 +1,369 @@ + + * @date 2020/1/19 + * @time 17:29 + * @link https://github.com/luolongfei/freenom + */ + +namespace Luolongfei\App\Console; + +use Luolongfei\App\Exceptions\LlfException; +use GuzzleHttp\Client; +use GuzzleHttp\Cookie\CookieJar; +use Luolongfei\Lib\Log; +use Luolongfei\Lib\Mail; +use Luolongfei\Lib\TelegramBot; + +class FreeNom +{ + const VERSION = 'v0.3'; + + const TIMEOUT = 34.52; + + // FreeNom登录地址 + const LOGIN_URL = 'https://my.freenom.com/dologin.php'; + + // 域名状态地址 + const DOMAIN_STATUS_URL = 'https://my.freenom.com/domains.php?a=renewals'; + + // 域名续期地址 + const RENEW_DOMAIN_URL = 'https://my.freenom.com/domains.php?submitrenewals=true'; + + // 匹配token的正则 + const TOKEN_REGEX = '/name="token"\svalue="(?P[^"]+)"/i'; + + // 匹配域名信息的正则 + const DOMAIN_INFO_REGEX = '/(?P[^<]+)<\/td>[^<]+<\/td>[^<]+(?P\d+)[^&]+&domain=(?P\d+)"/i'; + + // 匹配登录状态的正则 + const LOGIN_STATUS_REGEX = '//i'; + + /** + * @var FreeNom + */ + protected static $instance; + + /** + * @var Client + */ + protected $client; + + /** + * @var CookieJar | bool + */ + protected $jar = true; + + /** + * @var string freenom账户 + */ + protected $username; + + /** + * @var string freenom密码 + */ + protected $password; + + public function __construct() + { + $this->client = new Client([ + 'headers' => [ + 'Accept' => 'text/html,application/xhtml+xml,application/xml;q=0.9,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.9', + 'Accept-Encoding' => 'gzip, deflate, br', + 'User-Agent' => 'Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/79.0.3945.130 Safari/537.36', + ], + 'timeout' => self::TIMEOUT, + CURLOPT_FOLLOWLOCATION => true, + CURLOPT_AUTOREFERER => true, + 'verify' => config('verifySSL'), + 'debug' => config('debug') + ]); + + system_log(sprintf('当前程序版本 %s', self::VERSION)); + } + + /** + * @return FreeNom + */ + public static function instance() + { + if (!self::$instance instanceof self) { + self::$instance = new self(); + } + + return self::$instance; + } + + /** + * 登录 + */ + protected function login() + { + $this->client->post(self::LOGIN_URL, [ + 'headers' => [ + 'Content-Type' => 'application/x-www-form-urlencoded', + 'Referer' => 'https://my.freenom.com/clientarea.php' + ], + 'form_params' => [ + 'username' => $this->username, + 'password' => $this->password + ], + 'cookies' => $this->jar + ]); + } + + /** + * 续期 + * + * @throws \Exception + * @throws LlfException + */ + public function renewDomains() + { + // 所有请求共用一个CookieJar实例 + $this->jar = new CookieJar(); + + $this->login(); + $authCookie = $this->jar->getCookieByName('WHMCSZH5eHTGhfvzP')->getValue(); + if (empty($authCookie)) { + throw new LlfException(34520002); + } + + // 检查域名状态 + $response = $this->client->get(self::DOMAIN_STATUS_URL, [ + 'headers' => [ + 'Referer' => 'https://my.freenom.com/clientarea.php' + ], + 'cookies' => $this->jar + ]); + $body = (string)$response->getBody(); + + if (!preg_match(self::LOGIN_STATUS_REGEX, $body)) { + throw new LlfException(34520009); + } + + // 域名数据 + if (!preg_match_all(self::DOMAIN_INFO_REGEX, $body, $domains, PREG_SET_ORDER)) { + throw new LlfException(34520003); + } + + // 页面token + if (!preg_match(self::TOKEN_REGEX, $body, $matches)) { + throw new LlfException(34520004); + } + $token = $matches['token']; + + // 续期 + $result = ''; + $renewed = $renewedTG = ''; // 续期成功的域名 + $notRenewed = $notRenewedTG = ''; // 记录续期出错的域名，用于邮件通知内容 + $domainInfo = $domainInfoTG = ''; // 域名状态信息，用于邮件通知内容 + foreach ($domains as $d) { + $domain = $d['domain']; + $days = intval($d['days']); + $id = $d['id']; + + // 免费域名只允许在到期前14天内续期 + if ($days <= 14) { + try { + $response = $this->client->post(self::RENEW_DOMAIN_URL, [ + 'headers' => [ + 'Referer' => sprintf('https://my.freenom.com/domains.php?a=renewdomain&domain=%s', $id), + 'Content-Type' => 'application/x-www-form-urlencoded' + ], + 'form_params' => [ + 'token' => $token, + 'renewalid' => $id, + sprintf('renewalperiod[%s]', $id) => '12M', // 续期一年 + 'paymentmethod' => 'credit', // 支付方式：信用卡 + ], + 'cookies' => $this->jar + ]); + } catch (\Exception $e) { + system_log(sprintf('%s：续期请求出错：%s', $this->username, $e->getMessage())); + continue; + } + + $body = (string)$response->getBody(); + sleep(1); + + if (stripos($body, 'Order Confirmation') === false) { // 续期失败 + $result .= sprintf("%s续期失败\n", $domain); + $notRenewed .= sprintf('%s', $domain, $domain); + $notRenewedTG .= sprintf('[%s](http://%s) ', $domain, $domain); + } else { + $result .= sprintf("%s续期成功\n", $domain); + $renewed .= sprintf('%s', $domain, $domain); + $renewedTG .= sprintf('[%s](http://%s) ', $domain, $domain); + continue; + } + } + + $domainInfo .= sprintf('%s还有%d天到期，', $domain, $domain, $days); + $domainInfoTG .= sprintf('[%s](http://%s)还有*%d*天到期，', $domain, $domain, $days); + } + $domainInfoTG .= "更多信息可以参考[Freenom官网](https://my.freenom.com/domains.php?a=renewals)哦~\n\n（如果你不想每次执行都收到推送，请将 .env 中 NOTICE_FREQ 的值设为0，使程序只在有续期操作时才推送）"; + + if ($notRenewed || $renewed) { + Mail::send( + '主人，我刚刚帮你续期域名啦~', + [ + $this->username, + $renewed ? sprintf('续期成功：%s
', $renewed) : '', + $notRenewed ? sprintf('续期出错：%s
', $notRenewed) : '', + $domainInfo ?: '哦豁，没看到其它域名。' + ] + ); + TelegramBot::send(sprintf( + "主人，我刚刚帮你续期域名啦~\n\n%s%s\n另外，%s", + $renewedTG ? sprintf("续期成功：%s\n", $renewedTG) : '', + $notRenewedTG ? sprintf("续期失败：%s\n", $notRenewedTG) : '', + $domainInfoTG + )); + system_log(sprintf("%s：续期结果如下：\n%s", $this->username, $result)); + } else { + if (config('noticeFreq') == 1) { + Mail::send( + '报告，今天没有域名需要续期', + [ + $this->username, + $domainInfo + ], + '', + 'notice' + ); + TelegramBot::send("报告，今天没有域名需要续期，所有域名情况如下：\n\n" . $domainInfoTG); + } else { + system_log('当前通知频率为「仅当有续期操作时」，故本次不会推送通知'); + } + system_log(sprintf('%s：执行成功，今次没有需要续期的域名', $this->username)); + } + } + + /** + * 二维数组去重 + * + * @param array $array 原始数组 + * @param array $keys 可指定对应的键联合 + * + * @return bool + */ + public function arrayUnique(array &$array, array $keys = []) + { + if (!isset($array[0]) || !is_array($array[0])) { + return false; + } + + if (empty($keys)) { + $keys = array_keys($array[0]); + } + + $tmp = []; + foreach ($array as $k => $items) { + $combinedKey = ''; + foreach ($keys as $key) { + $combinedKey .= $items[$key]; + } + + if (isset($tmp[$combinedKey])) { + unset($array[$k]); + } else { + $tmp[$combinedKey] = $k; + } + } + unset($tmp); + + return true; + } + + /** + * 获取freenom账户信息 + * + * @return array + * @throws LlfException + */ + protected function getAccounts() + { + $accounts = []; + $multipleAccounts = preg_replace('/\s/', '', env('MULTIPLE_ACCOUNTS')); + if (preg_match_all('/<(?P.*?)>@<(?P

.*?)>/i', $multipleAccounts, $matches, PREG_SET_ORDER)) { + foreach ($matches as $m) { + $accounts[] = [ + 'username' => $m['u'], + 'password' => $m['p'] + ]; + } + } + + $username = env('FREENOM_USERNAME'); + $password = env('FREENOM_PASSWORD'); + if ($username && $password) { + $accounts[] = [ + 'username' => $username, + 'password' => $password + ]; + } + + if (empty($accounts)) { + throw new LlfException(34520001); + } + + // 去重 + $this->arrayUnique($accounts); + + return $accounts; + } + + /** + * 发送异常报告 + * + * @param \Exception $e + * + * @throws \Exception + */ + private function sendExceptionReport($e) + { + Mail::send( + '主人，' . $e->getMessage(), + [ + $this->username, + sprintf('具体是在%s文件的第%d行，抛出了一个异常。异常的内容是%s，快去看看吧。', $e->getFile(), $e->getLine(), $e->getMessage()), + ], + '', + 'LlfException' + ); + + TelegramBot::send(sprintf( + '主人，出错了。具体是在%s文件的第%d行，抛出了一个异常。异常的内容是%s，快去看看吧。（账户：%s）', + $e->getFile(), + $e->getLine(), + $e->getMessage(), + $this->username + ), '', false); + } + + /** + * @throws LlfException + * @throws \Exception + */ + public function handle() + { + $accounts = $this->getAccounts(); + foreach ($accounts as $account) { + try { + $this->username = $account['username']; + $this->password = $account['password']; + + $this->renewDomains(); + } catch (LlfException $e) { + system_log(sprintf('出错：%s', $e->getMessage())); + $this->sendExceptionReport($e); + } catch (\Exception $e) { + system_log(sprintf('出错：%s', $e->getMessage()), $e->getTrace()); + $this->sendExceptionReport($e); + } + } + } +} \ No newline at end of file diff --git a/app/Exceptions/.gitkeep b/app/Exceptions/.gitkeep new file mode 100644 index 00000000..e69de29b diff --git a/app/Exceptions/LlfException.php b/app/Exceptions/LlfException.php new file mode 100644 index 00000000..2c56be5e --- /dev/null +++ b/app/Exceptions/LlfException.php @@ -0,0 +1,29 @@ + + * @date 2018/8/10 + * @time 14:48 + */ + +namespace Luolongfei\App\Exceptions; + +class LlfException extends \Exception +{ + public function __construct($code, $additional = null, \Exception $previous = null) + { + $message = lang('exception_msg.' . $code) ?: ''; + + if ($additional !== null) { + if (is_array($additional)) { + array_unshift($additional, $message); + $message = call_user_func_array('sprintf', $additional); + } else if (is_string($additional)) { + $message = sprintf($message, $additional); + } + } + + parent::__construct($message . "(Error code: {$code})", $code, $previous); + } +} \ No newline at end of file diff --git a/app/helpers.php b/app/helpers.php new file mode 100644 index 00000000..cbf363d4 --- /dev/null +++ b/app/helpers.php @@ -0,0 +1,248 @@ + + * @date 2019/3/3 + * @time 16:34 + */ + +use Luolongfei\App\Exceptions\LlfException; +use Luolongfei\Lib\Argv; +use Luolongfei\Lib\Config; +use Luolongfei\Lib\Log; +use Luolongfei\Lib\Env; +use Luolongfei\Lib\Lang; +use Luolongfei\Lib\PhpColor; + +if (!function_exists('config')) { + /** + * 获取配置 + * + * @param string $key 键，支持点式访问 + * @param string $default 默认值 + * + * @return array|mixed + */ + function config($key = '', $default = null) + { + return Config::instance()->get($key, $default); + } +} + +if (!function_exists('lang')) { + /** + * 读取语言包 + * + * @param string $key 键，支持点式访问 + * + * @return array|mixed|null + */ + function lang($key = '') + { + return Lang::instance()->get($key); + } +} + +if (!function_exists('system_log')) { + /** + * 写日志 + * + * @param $content + * @param array $response + * @param string $fileName + * @description 受支持的着色标签 + * 'reset', 'bold', 'dark', 'italic', 'underline', 'blink', 'reverse', 'concealed', 'default', 'black', 'red', + * 'green', 'yellow', 'blue', 'magenta', 'cyan', 'light_gray', 'dark_gray', 'light_red', 'light_green', + * 'light_yellow', 'light_blue', 'light_magenta', 'light_cyan', 'white', 'bg_default', 'bg_black', 'bg_red', + * 'bg_green', 'bg_yellow', 'bg_blue', 'bg_magenta', 'bg_cyan', 'bg_light_gray', 'bg_dark_gray', 'bg_light_red', + * 'bg_light_green','bg_light_yellow', 'bg_light_blue', 'bg_light_magenta', 'bg_light_cyan', 'bg_white' + */ + function system_log($content, array $response = [], $fileName = '') + { + try { + $path = sprintf('%s/logs/%s/', ROOT_PATH, date('Y-m')); + $file = $path . ($fileName ?: date('d')) . '.log'; + + if (!is_dir($path)) { + mkdir($path, 0777, true); + chmod($path, 0777); + } + + $handle = fopen($file, 'a'); // 追加而非覆盖 + + if (!filesize($file)) { + chmod($file, 0666); + } + + $msg = sprintf( + "[%s] %s %s\n", + date('Y-m-d H:i:s'), + is_string($content) ? $content : json_encode($content), + $response ? json_encode($response, JSON_UNESCAPED_UNICODE) : ''); + + // 在 Github Actions 上运行，过滤敏感信息 + if (env('ON_GITHUB_ACTIONS')) { + $msg = preg_replace_callback('/(?P[\w-.]{1,4}?)(?=@[\w-.]+)/i', function ($m) { + return str_ireplace($m['secret'], str_repeat('*', strlen($m['secret'])), $m['secret']); + }, $msg); + } + + // 尝试为消息着色 + $c = PhpColor::instance()->getColorInstance(); + echo $c($msg)->colorize(); + + // 干掉着色标签 + $msg = strip_tags($msg); // 不完整或者破损标签将导致更多的数据被删除 + + fwrite($handle, $msg); + fclose($handle); + + flush(); + } catch (\Exception $e) { + // do nothing + } + } +} + +if (!function_exists('is_locked')) { + /** + * 检查任务是否已被锁定 + * + * @param string $taskName + * @param bool $always 是否被永久锁定 + * + * @return bool + * @throws Exception + */ + function is_locked($taskName = '', $always = false) + { + try { + $lock = sprintf( + '%s/num_limit/%s/%s.lock', + APP_PATH, + $always ? 'always' : date('Y-m-d'), + $taskName + ); + + return file_exists($lock); + } catch (\Exception $e) { + system_log(sprintf('检查任务%s是否锁定时出错，错误原因：%s', $taskName, $e->getMessage())); + } + + return false; + } +} + +if (!function_exists('lock_task')) { + /** + * 锁定任务 + * + * 防止重复执行 + * + * @param string $taskName + * @param bool $always 是否永久锁定 + * + * @return bool + */ + function lock_task($taskName = '', $always = false) + { + try { + $lock = sprintf( + '%s/num_limit/%s/%s.lock', + APP_PATH, + $always ? 'always' : date('Y-m-d'), + $taskName + ); + + $path = dirname($lock); + if (!is_dir($path)) { + mkdir($path, 0777, true); + chmod($path, 0777); + } + + if (file_exists($lock)) { + return true; + } + + $handle = fopen($lock, 'a'); // 追加而非覆盖 + + if (!filesize($lock)) { + chmod($lock, 0666); + } + + fwrite($handle, sprintf( + "Locked at %s.\n", + date('Y-m-d H:i:s') + ) + ); + + fclose($handle); + + Log::info(sprintf('%s已被锁定，此任务%s已不会再执行，请知悉', $taskName, $always ? '' : '今天内')); + } catch (\Exception $e) { + system_log(sprintf('创建锁定任务文件%s时出错，错误原因：%s', $lock, $e->getMessage())); + + return false; + } + + return true; + } +} + +if (!function_exists('env')) { + /** + * 获取环境变量值 + * + * @param string $key + * @param string $default 默认值 + * + * @return array | bool | false | null | string + */ + function env($key = '', $default = null) + { + return Env::instance()->get($key, $default); + } +} + +if (!function_exists('get_argv')) { + /** + * 获取命令行传参 + * + * @param string $name + * @param string $default 默认值 + * + * @return mixed|string + */ + function get_argv(string $name, string $default = '') + { + return Argv::instance()->get($name, $default); + } +} + +if (!function_exists('system_check')) { + /** + * 检查环境是否满足要求 + * + * @throws LlfException + */ + function system_check() + { + if (!function_exists('putenv')) { + throw new LlfException(34520005); + } + + if (version_compare(PHP_VERSION, '7.0.0') < 0) { + throw new LlfException(34520006); + } + + $envFile = ROOT_PATH . '/.env'; + if (!file_exists($envFile)) { + throw new LlfException(copy(ROOT_PATH . '/.env.example', $envFile) ? 34520007 : 34520008); + } + + if (!extension_loaded('curl')) { + throw new LlfException(34520010); + } + } +} \ No newline at end of file diff --git a/composer.json b/composer.json new file mode 100644 index 00000000..3fb4ddbc --- /dev/null +++ b/composer.json @@ -0,0 +1,37 @@ +{ + "name": "luolongfei/freenom", + "description": "freenom域名自动续期。", + "type": "project", + "require": { + "php": ">=7.1.0", + "ext-curl": "*", + "ext-openssl": "*", + "guzzlehttp/guzzle": "^6.3", + "monolog/monolog": "^1.24", + "bramus/monolog-colored-line-formatter": "~2.0", + "phpmailer/phpmailer": "^6.0", + "vlucas/phpdotenv": "^3.3", + "predis/predis": "^1.1", + "ext-json": "*", + "ext-bcmath": "*", + "ext-pdo": "*", + "kevinlebrun/colors.php": "^1.0" + }, + "license": "MIT", + "authors": [ + { + "name": "luolongfei", + "email": "mybsdc@gmail.com", + "homepage": "https://github.com/luolongfei/freenom" + } + ], + "autoload": { + "psr-4": { + "Luolongfei\\Lib\\": "libs", + "Luolongfei\\App\\": "app" + }, + "files": [ + "app/helpers.php" + ] + } +} diff --git a/composer.lock b/composer.lock new file mode 100644 index 00000000..298b7280 --- /dev/null +++ b/composer.lock @@ -0,0 +1,844 @@ +{ + "_readme": [ + "This file locks the dependencies of your project to a known state", + "Read more about it at https://getcomposer.org/doc/01-basic-usage.md#installing-dependencies", + "This file is @generated automatically" + ], + "content-hash": "1490a7a3df10963c3b2891841cfe0591", + "packages": [ + { + "name": "bramus/ansi-php", + "version": "3.0.3", + "source": { + "type": "git", + "url": "https://github.com/bramus/ansi-php.git", + "reference": "fb0be33f36053af7454d462e3ddc0a2ac0b2f311" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/bramus/ansi-php/zipball/fb0be33f36053af7454d462e3ddc0a2ac0b2f311", + "reference": "fb0be33f36053af7454d462e3ddc0a2ac0b2f311", + "shasum": "" + }, + "require": { + "php": ">=5.4.0" + }, + "require-dev": { + "phpunit/phpunit": "~4.0" + }, + "type": "library", + "autoload": { + "psr-4": { + "Bramus\\Ansi\\": "src/" + } + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Bramus Van Damme", + "email": "bramus@bram.us", + "homepage": "https://www.bram.us/" + } + ], + "description": "ANSI Control Functions and ANSI Control Sequences (Colors, Erasing, etc.) for PHP CLI Apps", + "time": "2019-12-03T09:04:38+00:00" + }, + { + "name": "bramus/monolog-colored-line-formatter", + "version": "2.0.3", + "source": { + "type": "git", + "url": "https://github.com/bramus/monolog-colored-line-formatter.git", + "reference": "6bff15eee00afe2690642535b0f1541f10852c2b" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/bramus/monolog-colored-line-formatter/zipball/6bff15eee00afe2690642535b0f1541f10852c2b", + "reference": "6bff15eee00afe2690642535b0f1541f10852c2b", + "shasum": "" + }, + "require": { + "bramus/ansi-php": "~3.0", + "php": ">=5.4.0" + }, + "require-dev": { + "monolog/monolog": "~1.0", + "phpunit/phpunit": "~4.0" + }, + "type": "library", + "autoload": { + "psr-4": { + "Bramus\\Monolog\\": "src/" + } + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Bramus Van Damme", + "email": "bramus@bram.us", + "homepage": "https://www.bram.us/" + } + ], + "description": "Colored Line Formatter for Monolog", + "time": "2015-01-07T22:12:35+00:00" + }, + { + "name": "guzzlehttp/guzzle", + "version": "6.5.2", + "source": { + "type": "git", + "url": "https://github.com/guzzle/guzzle.git", + "reference": "43ece0e75098b7ecd8d13918293029e555a50f82" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/guzzle/guzzle/zipball/43ece0e75098b7ecd8d13918293029e555a50f82", + "reference": "43ece0e75098b7ecd8d13918293029e555a50f82", + "shasum": "" + }, + "require": { + "ext-json": "*", + "guzzlehttp/promises": "^1.0", + "guzzlehttp/psr7": "^1.6.1", + "php": ">=5.5" + }, + "require-dev": { + "ext-curl": "*", + "phpunit/phpunit": "^4.8.35 || ^5.7 || ^6.4 || ^7.0", + "psr/log": "^1.1" + }, + "suggest": { + "ext-intl": "Required for Internationalized Domain Name (IDN) support", + "psr/log": "Required for using the Log middleware" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "6.5-dev" + } + }, + "autoload": { + "psr-4": { + "GuzzleHttp\\": "src/" + }, + "files": [ + "src/functions_include.php" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Michael Dowling", + "email": "mtdowling@gmail.com", + "homepage": "https://github.com/mtdowling" + } + ], + "description": "Guzzle is a PHP HTTP client library", + "homepage": "http://guzzlephp.org/", + "keywords": [ + "client", + "curl", + "framework", + "http", + "http client", + "rest", + "web service" + ], + "time": "2019-12-23T11:57:10+00:00" + }, + { + "name": "guzzlehttp/promises", + "version": "v1.3.1", + "source": { + "type": "git", + "url": "https://github.com/guzzle/promises.git", + "reference": "a59da6cf61d80060647ff4d3eb2c03a2bc694646" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/guzzle/promises/zipball/a59da6cf61d80060647ff4d3eb2c03a2bc694646", + "reference": "a59da6cf61d80060647ff4d3eb2c03a2bc694646", + "shasum": "" + }, + "require": { + "php": ">=5.5.0" + }, + "require-dev": { + "phpunit/phpunit": "^4.0" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.4-dev" + } + }, + "autoload": { + "psr-4": { + "GuzzleHttp\\Promise\\": "src/" + }, + "files": [ + "src/functions_include.php" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Michael Dowling", + "email": "mtdowling@gmail.com", + "homepage": "https://github.com/mtdowling" + } + ], + "description": "Guzzle promises library", + "keywords": [ + "promise" + ], + "time": "2016-12-20T10:07:11+00:00" + }, + { + "name": "guzzlehttp/psr7", + "version": "1.6.1", + "source": { + "type": "git", + "url": "https://github.com/guzzle/psr7.git", + "reference": "239400de7a173fe9901b9ac7c06497751f00727a" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/guzzle/psr7/zipball/239400de7a173fe9901b9ac7c06497751f00727a", + "reference": "239400de7a173fe9901b9ac7c06497751f00727a", + "shasum": "" + }, + "require": { + "php": ">=5.4.0", + "psr/http-message": "~1.0", + "ralouphie/getallheaders": "^2.0.5 || ^3.0.0" + }, + "provide": { + "psr/http-message-implementation": "1.0" + }, + "require-dev": { + "ext-zlib": "*", + "phpunit/phpunit": "~4.8.36 || ^5.7.27 || ^6.5.8" + }, + "suggest": { + "zendframework/zend-httphandlerrunner": "Emit PSR-7 responses" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.6-dev" + } + }, + "autoload": { + "psr-4": { + "GuzzleHttp\\Psr7\\": "src/" + }, + "files": [ + "src/functions_include.php" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Michael Dowling", + "email": "mtdowling@gmail.com", + "homepage": "https://github.com/mtdowling" + }, + { + "name": "Tobias Schultze", + "homepage": "https://github.com/Tobion" + } + ], + "description": "PSR-7 message implementation that also provides common utility methods", + "keywords": [ + "http", + "message", + "psr-7", + "request", + "response", + "stream", + "uri", + "url" + ], + "time": "2019-07-01T23:21:34+00:00" + }, + { + "name": "kevinlebrun/colors.php", + "version": "1.0.3", + "source": { + "type": "git", + "url": "https://github.com/kevinlebrun/colors.php.git", + "reference": "cdda5eee41314b87cd5a8bb91b1ffc7c0210e673" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/kevinlebrun/colors.php/zipball/cdda5eee41314b87cd5a8bb91b1ffc7c0210e673", + "reference": "cdda5eee41314b87cd5a8bb91b1ffc7c0210e673", + "shasum": "" + }, + "require": { + "php": ">=5.3.0" + }, + "require-dev": { + "phpunit/phpunit": "3.7.*", + "satooshi/php-coveralls": "1.0.*", + "squizlabs/php_codesniffer": "1.*" + }, + "type": "library", + "autoload": { + "psr-0": { + "Colors": "src/" + } + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Kevin Le Brun", + "email": "lebrun.k@gmail.com", + "homepage": "http://kevinlebrun.fr", + "role": "developer" + } + ], + "description": "Colors for PHP CLI scripts", + "homepage": "https://github.com/kevinlebrun/colors.php", + "keywords": [ + "cli", + "color", + "colors", + "console", + "shell" + ], + "time": "2018-05-30T08:34:23+00:00" + }, + { + "name": "monolog/monolog", + "version": "1.25.3", + "source": { + "type": "git", + "url": "https://github.com/Seldaek/monolog.git", + "reference": "fa82921994db851a8becaf3787a9e73c5976b6f1" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/Seldaek/monolog/zipball/fa82921994db851a8becaf3787a9e73c5976b6f1", + "reference": "fa82921994db851a8becaf3787a9e73c5976b6f1", + "shasum": "" + }, + "require": { + "php": ">=5.3.0", + "psr/log": "~1.0" + }, + "provide": { + "psr/log-implementation": "1.0.0" + }, + "require-dev": { + "aws/aws-sdk-php": "^2.4.9 || ^3.0", + "doctrine/couchdb": "~1.0@dev", + "graylog2/gelf-php": "~1.0", + "jakub-onderka/php-parallel-lint": "0.9", + "php-amqplib/php-amqplib": "~2.4", + "php-console/php-console": "^3.1.3", + "phpunit/phpunit": "~4.5", + "phpunit/phpunit-mock-objects": "2.3.0", + "ruflin/elastica": ">=0.90 <3.0", + "sentry/sentry": "^0.13", + "swiftmailer/swiftmailer": "^5.3|^6.0" + }, + "suggest": { + "aws/aws-sdk-php": "Allow sending log messages to AWS services like DynamoDB", + "doctrine/couchdb": "Allow sending log messages to a CouchDB server", + "ext-amqp": "Allow sending log messages to an AMQP server (1.0+ required)", + "ext-mongo": "Allow sending log messages to a MongoDB server", + "graylog2/gelf-php": "Allow sending log messages to a GrayLog2 server", + "mongodb/mongodb": "Allow sending log messages to a MongoDB server via PHP Driver", + "php-amqplib/php-amqplib": "Allow sending log messages to an AMQP server using php-amqplib", + "php-console/php-console": "Allow sending log messages to Google Chrome", + "rollbar/rollbar": "Allow sending log messages to Rollbar", + "ruflin/elastica": "Allow sending log messages to an Elastic Search server", + "sentry/sentry": "Allow sending log messages to a Sentry server" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "2.0.x-dev" + } + }, + "autoload": { + "psr-4": { + "Monolog\\": "src/Monolog" + } + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Jordi Boggiano", + "email": "j.boggiano@seld.be", + "homepage": "http://seld.be" + } + ], + "description": "Sends your logs to files, sockets, inboxes, databases and various web services", + "homepage": "http://github.com/Seldaek/monolog", + "keywords": [ + "log", + "logging", + "psr-3" + ], + "time": "2019-12-20T14:15:16+00:00" + }, + { + "name": "phpmailer/phpmailer", + "version": "v6.1.6", + "source": { + "type": "git", + "url": "https://github.com/PHPMailer/PHPMailer.git", + "reference": "c2796cb1cb99d7717290b48c4e6f32cb6c60b7b3" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/PHPMailer/PHPMailer/zipball/c2796cb1cb99d7717290b48c4e6f32cb6c60b7b3", + "reference": "c2796cb1cb99d7717290b48c4e6f32cb6c60b7b3", + "shasum": "" + }, + "require": { + "ext-ctype": "*", + "ext-filter": "*", + "php": ">=5.5.0" + }, + "require-dev": { + "doctrine/annotations": "^1.2", + "friendsofphp/php-cs-fixer": "^2.2", + "phpunit/phpunit": "^4.8 || ^5.7" + }, + "suggest": { + "ext-mbstring": "Needed to send email in multibyte encoding charset", + "hayageek/oauth2-yahoo": "Needed for Yahoo XOAUTH2 authentication", + "league/oauth2-google": "Needed for Google XOAUTH2 authentication", + "psr/log": "For optional PSR-3 debug logging", + "stevenmaguire/oauth2-microsoft": "Needed for Microsoft XOAUTH2 authentication", + "symfony/polyfill-mbstring": "To support UTF-8 if the Mbstring PHP extension is not enabled (^1.2)" + }, + "type": "library", + "autoload": { + "psr-4": { + "PHPMailer\\PHPMailer\\": "src/" + } + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "LGPL-2.1-only" + ], + "authors": [ + { + "name": "Marcus Bointon", + "email": "phpmailer@synchromedia.co.uk" + }, + { + "name": "Jim Jagielski", + "email": "jimjag@gmail.com" + }, + { + "name": "Andy Prevost", + "email": "codeworxtech@users.sourceforge.net" + }, + { + "name": "Brent R. Matzelle" + } + ], + "description": "PHPMailer is a full-featured email creation and transfer class for PHP", + "time": "2020-05-27T12:24:03+00:00" + }, + { + "name": "phpoption/phpoption", + "version": "1.7.2", + "source": { + "type": "git", + "url": "https://github.com/schmittjoh/php-option.git", + "reference": "77f7c4d2e65413aff5b5a8cc8b3caf7a28d81959" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/schmittjoh/php-option/zipball/77f7c4d2e65413aff5b5a8cc8b3caf7a28d81959", + "reference": "77f7c4d2e65413aff5b5a8cc8b3caf7a28d81959", + "shasum": "" + }, + "require": { + "php": "^5.5.9 || ^7.0" + }, + "require-dev": { + "bamarni/composer-bin-plugin": "^1.3", + "phpunit/phpunit": "^4.8.35 || ^5.0 || ^6.0 || ^7.0" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.7-dev" + } + }, + "autoload": { + "psr-4": { + "PhpOption\\": "src/PhpOption/" + } + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "Apache-2.0" + ], + "authors": [ + { + "name": "Johannes M. Schmitt", + "email": "schmittjoh@gmail.com" + }, + { + "name": "Graham Campbell", + "email": "graham@alt-three.com" + } + ], + "description": "Option Type for PHP", + "keywords": [ + "language", + "option", + "php", + "type" + ], + "time": "2019-12-15T19:35:24+00:00" + }, + { + "name": "predis/predis", + "version": "v1.1.1", + "source": { + "type": "git", + "url": "https://github.com/nrk/predis.git", + "reference": "f0210e38881631afeafb56ab43405a92cafd9fd1" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/nrk/predis/zipball/f0210e38881631afeafb56ab43405a92cafd9fd1", + "reference": "f0210e38881631afeafb56ab43405a92cafd9fd1", + "shasum": "" + }, + "require": { + "php": ">=5.3.9" + }, + "require-dev": { + "phpunit/phpunit": "~4.8" + }, + "suggest": { + "ext-curl": "Allows access to Webdis when paired with phpiredis", + "ext-phpiredis": "Allows faster serialization and deserialization of the Redis protocol" + }, + "type": "library", + "autoload": { + "psr-4": { + "Predis\\": "src/" + } + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Daniele Alessandri", + "email": "suppakilla@gmail.com", + "homepage": "http://clorophilla.net" + } + ], + "description": "Flexible and feature-complete Redis client for PHP and HHVM", + "homepage": "http://github.com/nrk/predis", + "keywords": [ + "nosql", + "predis", + "redis" + ], + "time": "2016-06-16T16:22:20+00:00" + }, + { + "name": "psr/http-message", + "version": "1.0.1", + "source": { + "type": "git", + "url": "https://github.com/php-fig/http-message.git", + "reference": "f6561bf28d520154e4b0ec72be95418abe6d9363" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/php-fig/http-message/zipball/f6561bf28d520154e4b0ec72be95418abe6d9363", + "reference": "f6561bf28d520154e4b0ec72be95418abe6d9363", + "shasum": "" + }, + "require": { + "php": ">=5.3.0" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.0.x-dev" + } + }, + "autoload": { + "psr-4": { + "Psr\\Http\\Message\\": "src/" + } + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "PHP-FIG", + "homepage": "http://www.php-fig.org/" + } + ], + "description": "Common interface for HTTP messages", + "homepage": "https://github.com/php-fig/http-message", + "keywords": [ + "http", + "http-message", + "psr", + "psr-7", + "request", + "response" + ], + "time": "2016-08-06T14:39:51+00:00" + }, + { + "name": "psr/log", + "version": "1.1.2", + "source": { + "type": "git", + "url": "https://github.com/php-fig/log.git", + "reference": "446d54b4cb6bf489fc9d75f55843658e6f25d801" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/php-fig/log/zipball/446d54b4cb6bf489fc9d75f55843658e6f25d801", + "reference": "446d54b4cb6bf489fc9d75f55843658e6f25d801", + "shasum": "" + }, + "require": { + "php": ">=5.3.0" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.1.x-dev" + } + }, + "autoload": { + "psr-4": { + "Psr\\Log\\": "Psr/Log/" + } + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "PHP-FIG", + "homepage": "http://www.php-fig.org/" + } + ], + "description": "Common interface for logging libraries", + "homepage": "https://github.com/php-fig/log", + "keywords": [ + "log", + "psr", + "psr-3" + ], + "time": "2019-11-01T11:05:21+00:00" + }, + { + "name": "ralouphie/getallheaders", + "version": "3.0.3", + "source": { + "type": "git", + "url": "https://github.com/ralouphie/getallheaders.git", + "reference": "120b605dfeb996808c31b6477290a714d356e822" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/ralouphie/getallheaders/zipball/120b605dfeb996808c31b6477290a714d356e822", + "reference": "120b605dfeb996808c31b6477290a714d356e822", + "shasum": "" + }, + "require": { + "php": ">=5.6" + }, + "require-dev": { + "php-coveralls/php-coveralls": "^2.1", + "phpunit/phpunit": "^5 || ^6.5" + }, + "type": "library", + "autoload": { + "files": [ + "src/getallheaders.php" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Ralph Khattar", + "email": "ralph.khattar@gmail.com" + } + ], + "description": "A polyfill for getallheaders.", + "time": "2019-03-08T08:55:37+00:00" + }, + { + "name": "symfony/polyfill-ctype", + "version": "v1.13.1", + "source": { + "type": "git", + "url": "https://github.com/symfony/polyfill-ctype.git", + "reference": "f8f0b461be3385e56d6de3dbb5a0df24c0c275e3" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/symfony/polyfill-ctype/zipball/f8f0b461be3385e56d6de3dbb5a0df24c0c275e3", + "reference": "f8f0b461be3385e56d6de3dbb5a0df24c0c275e3", + "shasum": "" + }, + "require": { + "php": ">=5.3.3" + }, + "suggest": { + "ext-ctype": "For best performance" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.13-dev" + } + }, + "autoload": { + "psr-4": { + "Symfony\\Polyfill\\Ctype\\": "" + }, + "files": [ + "bootstrap.php" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Gert de Pagter", + "email": "BackEndTea@gmail.com" + }, + { + "name": "Symfony Community", + "homepage": "https://symfony.com/contributors" + } + ], + "description": "Symfony polyfill for ctype functions", + "homepage": "https://symfony.com", + "keywords": [ + "compatibility", + "ctype", + "polyfill", + "portable" + ], + "time": "2019-11-27T13:56:44+00:00" + }, + { + "name": "vlucas/phpdotenv", + "version": "v3.6.0", + "source": { + "type": "git", + "url": "https://github.com/vlucas/phpdotenv.git", + "reference": "1bdf24f065975594f6a117f0f1f6cabf1333b156" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/vlucas/phpdotenv/zipball/1bdf24f065975594f6a117f0f1f6cabf1333b156", + "reference": "1bdf24f065975594f6a117f0f1f6cabf1333b156", + "shasum": "" + }, + "require": { + "php": "^5.4 || ^7.0", + "phpoption/phpoption": "^1.5", + "symfony/polyfill-ctype": "^1.9" + }, + "require-dev": { + "phpunit/phpunit": "^4.8.35 || ^5.0 || ^6.0 || ^7.0" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "3.6-dev" + } + }, + "autoload": { + "psr-4": { + "Dotenv\\": "src/" + } + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "BSD-3-Clause" + ], + "authors": [ + { + "name": "Graham Campbell", + "email": "graham@alt-three.com", + "homepage": "https://gjcampbell.co.uk/" + }, + { + "name": "Vance Lucas", + "email": "vance@vancelucas.com", + "homepage": "https://vancelucas.com/" + } + ], + "description": "Loads environment variables from `.env` to `getenv()`, `$_ENV` and `$_SERVER` automagically.", + "keywords": [ + "dotenv", + "env", + "environment" + ], + "time": "2019-09-10T21:37:39+00:00" + } + ], + "packages-dev": [], + "aliases": [], + "minimum-stability": "stable", + "stability-flags": [], + "prefer-stable": false, + "prefer-lowest": false, + "platform": { + "php": ">=7.1.0", + "ext-curl": "*", + "ext-openssl": "*", + "ext-json": "*", + "ext-bcmath": "*", + "ext-pdo": "*" + }, + "platform-dev": [] +} diff --git a/config.php b/config.php new file mode 100644 index 00000000..151fae7f --- /dev/null +++ b/config.php @@ -0,0 +1,42 @@ + + * @date 2019/3/2 + * @time 11:39 + */ + +return [ + /** + * 邮箱配置 + */ + 'mail' => [ + /** + * 目前机器人邮箱账户支持谷歌邮箱、QQ邮箱以及163邮箱，程序会自动判断填入的邮箱类型并使用合适的配置。注意，QQ邮箱与163邮箱均使用 + * 账户加授权码的方式登录，谷歌邮箱使用账户加密码的方式登录，请知悉。 + */ + 'to' => env('TO'), // 用于接收通知的邮箱 + 'toName' => '主人', // 收件人名字 + 'username' => env('MAIL_USERNAME'), // 机器人邮箱账户 + 'password' => env('MAIL_PASSWORD'), // 机器人邮箱密码或授权码 + 'enable' => env('MAIL_ENABLE'), // 是否启用，默认启用 + + // 'replyTo' => 'mybsdc@qq.com', // 接收回复的邮箱 + // 'replyToName' => '作者', // 接收回复的人名 + ], + + /** + * Telegram Bot + */ + 'telegram' => [ + 'chatID' => env('TELEGRAM_CHAT_ID'), // 你的chat_id，通过发送“/start”给@userinfobot可以获取自己的id + 'token' => env('TELEGRAM_BOT_TOKEN'), // Telegram Bot 的 token + 'enable' => env('TELEGRAM_BOT_ENABLE') // 是否启用，默认不启用 + ], + + 'locale' => 'zh', // 指定语言包，位于resources/lang/目录下 + 'noticeFreq' => env('NOTICE_FREQ'), // 通知频率 0：仅当有续期操作的时候 1：每次执行 + 'verifySSL' => env('VERIFY_SSL'), // 请求时验证 SSL 证书行为，默认不验证，防止服务器证书过期或证书颁布者信息不全导致无法发出请求 + 'debug' => env('DEBUG'), +]; \ No newline at end of file diff --git a/docker-entrypoint.sh b/docker-entrypoint.sh new file mode 100644 index 00000000..6cca5249 --- /dev/null +++ b/docker-entrypoint.sh @@ -0,0 +1,58 @@ +#!/usr/bin/env bash + +#===================================================================# +# Author: mybsdc # +# Intro: https://github.com/luolongfei/freenom # +#===================================================================# + +set -e + +# 自定义颜色变量 +red='\033[0;31m' +green='\033[0;32m' +yellow='\033[0;33m' +plain='\033[0m' + +# 生成配置文件 +if [ ! -f /conf/.env ]; then + cp /app/.env.example /conf/.env + echo -e "[${green}Info${plain}] 已生成 .env 文件，请将 .env 文件中的配置项改为你自己的，然后重启容器" +fi +if [ ! -f /app/.env ]; then + ln -s /conf/.env /app/.env +fi + +# PHP 命令 +PHP_COMMAND='php /app/run > /app/logs/freenom_cron.log 2>&1' + +# 指定脚本执行时间 +if [ -z "${RUN_AT}" ]; then + minute=$( shuf -i 0-59 -n 1 ) + hour=$( shuf -i 6-23 -n 1 ) + CRON_COMMAND="${minute} ${hour} * * * ${PHP_COMMAND}" + echo -e "[${green}Info${plain}] 已自动指定执行时间，续期任务将在北京时间每天 「${hour}:${minute}」 执行" + echo -e "[${green}Info${plain}] 在没有手动指定 RUN_AT 环境变量的情况下，每次重启容器，程序都会重新在 06 ~ 23 点全时段中自动随机指定一个执行时间，目的是防止很多人在同一个时间点执行任务导致 Freenom 无法稳定提供服务" +else + if [[ "${RUN_AT}" =~ ^([01][0-9]|2[0-3]|[0-9]):([0-5][0-9]|[0-9])$ ]]; then + minute=$( echo ${RUN_AT} | egrep -o '([0-5][0-9]|[0-9])$' ) + hour=$( echo ${RUN_AT} | egrep -o '^([01][0-9]|2[0-3]|[0-9])' ) + CRON_COMMAND="${minute} ${hour} * * * ${PHP_COMMAND}" + echo -e "[${green}Info${plain}] 你已指定执行时间，续期任务将在北京时间每天 「${hour}:${minute}」 执行" + elif [[ "${RUN_AT}" =~ ^([0-9\/*-]+( |$)){5}$ ]]; then + CRON_COMMAND="${RUN_AT} ${PHP_COMMAND}" + else + echo -e "[${red}Error${plain}] RUN_AT 的值无效" + echo -e "${yellow}请输入一个有效的时间指令，其值可以为时分格式，如：11:24，也可以为 CRON 命令中的时间格式，如：'24 11 * * *'，甚至可以不输入，让程序自动生成，推荐采用自动生成的方式，不建议手动指定此环境变量" + exit 1 + fi +fi + +# 添加计划任务 +sed -i '/freenom_cron/'d /etc/crontabs/root +echo -e "${CRON_COMMAND}" >> /etc/crontabs/root + +echo -e "[${green}Info${plain}] CRON_COMMAND: ${CRON_COMMAND}" + +php run + +exec "$@" diff --git a/libs/Argv.php b/libs/Argv.php new file mode 100644 index 00000000..a5e2e9cf --- /dev/null +++ b/libs/Argv.php @@ -0,0 +1,89 @@ + + * @date 2020/1/3 + * @time 16:32 + */ + +namespace Luolongfei\Lib; + +class Argv +{ + /** + * @var Argv + */ + protected static $instance; + + /** + * @var array 所有命令行传参 + */ + public $allArgvs = []; + + public function __construct() + { + if ($this->get('help') || $this->get('h')) { + $desc = << 指定要实例化的类名。默认调用FreeNom类 +-m: 指定要调用的方法名（不支持静态方法）。默认调用handle方法 +-h: 显示说明 + +Example: +$ php run -c=FreeNom -m=handle + +FLL; + echo $desc; + exit(0); + } + } + + /** + * @return Argv + */ + public static function instance() + { + if (!self::$instance instanceof self) { + self::$instance = new self(); + } + + return self::$instance; + } + + /** + * 获取命令行参数 + * + * @param string $name + * @param string $default + * + * @return mixed|string + */ + public function get(string $name, string $default = '') + { + if (!$this->allArgvs) { + $this->setAllArgvs(); + } + + return $this->allArgvs[$name] ?? $default; + } + + /** + * 设置命令行所有参数 + * + * @return array + */ + public function setAllArgvs() + { + global $argv; + + foreach ($argv as $a) { // Windows默认命令行无法正确传入使用引号括住的带空格参数，换个命令行终端就好，Linux不受影响 + if (preg_match('/^-{1,2}(?P\w+)(?:=([\'"]|)(?P[^\n\t\v\f\r\'"]+)\2)?$/i', $a, $m)) { + $this->allArgvs[$m['name']] = $m['val'] ?? true; + } + } + + return $this->allArgvs; + } +} \ No newline at end of file diff --git a/libs/Config.php b/libs/Config.php new file mode 100644 index 00000000..a8425b17 --- /dev/null +++ b/libs/Config.php @@ -0,0 +1,74 @@ + + * @date 2019/3/3 + * @time 16:41 + */ + +namespace Luolongfei\Lib; + +class Config +{ + /** + * @var Config + */ + protected static $instance; + + /** + * @var array 配置 + */ + protected $allConfig; + + public function __construct() + { + $this->allConfig = require ROOT_PATH . '/config.php'; + } + + /** + * 获取配置 + * + * @param string $key + * @param string $default 默认值 + * + * @return array|mixed|null + */ + public function get($key = '', $default = null) + { + $allConfig = $this->allConfig; + + if (strlen($key)) { + if (strpos($key, '.')) { + $keys = explode('.', $key); + $val = $allConfig; + foreach ($keys as $k) { + if (!isset($val[$k])) { + return $default; // 任一下标不存在就返回默认值 + } + + $val = $val[$k]; + } + + return $val; + } else { + if (isset($allConfig[$key])) { + return $allConfig[$key]; + } + + return $default; + } + } + + return $allConfig; + } + + public static function instance() + { + if (!self::$instance instanceof self) { + self::$instance = new self(); + } + + return self::$instance; + } +} \ No newline at end of file diff --git a/libs/Env.php b/libs/Env.php new file mode 100644 index 00000000..df87790c --- /dev/null +++ b/libs/Env.php @@ -0,0 +1,72 @@ + + * @date 2019/6/2 + * @time 17:28 + */ + +namespace Luolongfei\Lib; + +use Dotenv\Dotenv; + +class Env +{ + /** + * @var Env + */ + protected static $instance; + + /** + * @var array 环境变量值 + */ + protected $allValues; + + public function __construct($fileName) + { + $this->allValues = Dotenv::create(ROOT_PATH, $fileName)->load(); + } + + public static function instance($fileName = '.env') + { + if (!self::$instance instanceof self) { + self::$instance = new self($fileName); + } + + return self::$instance; + } + + public function get($key = '', $default = null) + { + if (!strlen($key)) { // 不传key则返回所有环境变量 + return $this->allValues; + } + + $value = getenv($key); + if ($value === false) { + return $default; + } + + switch (strtolower($value)) { + case 'true': + case '(true)': + return true; + case 'false': + case '(false)': + return false; + case 'empty': + case '(empty)': + return ''; + case 'null': + case '(null)': + return null; + } + + if (($valueLength = strlen($value)) > 1 && $value[0] === '"' && $value[$valueLength - 1] === '"') { // 去除双引号 + return substr($value, 1, -1); + } + + return $value; + } +} \ No newline at end of file diff --git a/libs/Lang.php b/libs/Lang.php new file mode 100644 index 00000000..d4dfb0d2 --- /dev/null +++ b/libs/Lang.php @@ -0,0 +1,74 @@ + + * @date 2020/1/16 + * @time 16:30 + */ + +namespace Luolongfei\Lib; + +class Lang +{ + /** + * @var Lang + */ + protected static $instance; + + /** + * @var array + */ + public $lang; + + public function __construct() + { + $this->lang = require sprintf('%s/lang/%s.php', RESOURCES_PATH, config('locale')); + } + + /** + * @param string $key + * + * @return array|mixed|null + */ + public function get($key = '') + { + $lang = $this->lang; + + if (strlen($key)) { + if (strpos($key, '.')) { + $keys = explode('.', $key); + $val = $lang; + foreach ($keys as $k) { + if (!isset($val[$k])) { + return null; // 任一下标不存在就返回null + } + + $val = $val[$k]; + } + + return $val; + } else { + if (isset($lang[$key])) { + return $lang[$key]; + } + + return null; + } + } + + return $lang; + } + + /** + * @return Lang + */ + public static function instance() + { + if (!self::$instance instanceof self) { + self::$instance = new self(); + } + + return self::$instance; + } +} \ No newline at end of file diff --git a/libs/Log.php b/libs/Log.php new file mode 100644 index 00000000..fcc5dbfc --- /dev/null +++ b/libs/Log.php @@ -0,0 +1,134 @@ + + * @date 2019/3/3 + * @time 12:01 + */ + +namespace Luolongfei\Lib; + +use Monolog\Logger; +use Monolog\Handler\StreamHandler; +use Bramus\Monolog\Formatter\ColoredLineFormatter; + +class Log +{ + /** + * @var Logger + */ + protected static $loggerInstance; + + /** + * 由于php不能在类外使用已实例化的对象来访问静态属性，但可以在类外访问类里的静态方法，故定义此方法实现类外访问静态属性 + * + * 注意，info等方法不写日志，error方法才写日志到指定目录 + * + * @return Logger + * @throws \Exception + */ + public static function logger() + { + if (!self::$loggerInstance instanceof Logger) { + $handler = new StreamHandler( + config('debug') ? 'php://stdout' : sprintf('%s/logs/%s.log', ROOT_PATH, date('Y-m/d')), + config('debug') ? Logger::DEBUG : Logger::INFO + ); + if (config('debug')) { + $handler->setFormatter(new ColoredLineFormatter(null, "[%datetime%] %channel%.%level_name%: %message%\n")); + } + + $logger = new Logger('pusher'); + $logger->pushHandler($handler); + + self::$loggerInstance = $logger; + } + + return self::$loggerInstance; + } + + /** + * @param $message + * @param array $context + * + * @return bool + * @throws \Exception + */ + public static function debug($message, array $context = []) + { + return self::logger()->addDebug($message, $context); + } + + /** + * @param $message + * @param array $context + * + * @return bool + * @throws \Exception + */ + public static function info($message, array $context = []) + { + return self::logger()->addInfo($message, $context); + } + + /** + * @param $message + * @param array $context + * + * @return bool + * @throws \Exception + */ + public static function notice($message, array $context = []) + { + return self::logger()->addNotice($message, $context); + } + + /** + * @param $message + * @param array $context + * + * @return bool + * @throws \Exception + */ + public static function warning($message, array $context = []) + { + return self::logger()->addWarning($message, $context); + } + + /** + * @param $message + * @param array $context + * + * @return bool + * @throws \Exception + */ + public static function error($message, array $context = []) + { + return self::logger()->addError($message, $context); + } + + /** + * @param $message + * @param array $context + * + * @return bool + * @throws \Exception + */ + public static function alert($message, array $context = []) + { + return self::logger()->addAlert($message, $context); + } + + /** + * @param $message + * @param array $context + * + * @return bool + * @throws \Exception + */ + public static function emergency($message, array $context = []) + { + return self::logger()->addEmergency($message, $context); + } +} \ No newline at end of file diff --git a/libs/Mail.php b/libs/Mail.php new file mode 100644 index 00000000..377f2155 --- /dev/null +++ b/libs/Mail.php @@ -0,0 +1,143 @@ + + * @date 2019/5/12 + * @time 16:38 + */ + +namespace Luolongfei\Lib; + +use Luolongfei\App\Exceptions\LlfException; +use PHPMailer\PHPMailer\PHPMailer; +use PHPMailer\PHPMailer\Exception as MailException; + +class Mail +{ + /** + * @var PHPMailer + */ + protected static $mail; + + /** + * @return PHPMailer + * @throws MailException + * @throws \Exception + */ + public static function mail() + { + if (!self::$mail instanceof PHPMailer) { + self::$mail = new PHPMailer(true); + + // 邮件服务配置 + $username = config('mail.username'); + $password = config('mail.password'); + if (stripos($username, '@gmail.com') !== false) { + $host = 'smtp.gmail.com'; + $secure = 'tls'; + $port = 587; + } else if (stripos($username, '@qq.com') !== false) { + $host = 'smtp.qq.com'; + $secure = 'tls'; + $port = 587; + } else if (stripos($username, '@163.com') !== false) { + $host = 'smtp.163.com'; + $secure = 'ssl'; + $port = 465; + } else if (stripos($username, '@vip.163.com') !== false) { + $host = 'smtp.vip.163.com'; + $secure = 'ssl'; + $port = 465; + } else if (stripos($username, '@outlook.com') !== false) { + $host = 'smtp.office365.com'; + $secure = 'starttls'; + $port = 587; + } else { + throw new \Exception('不受支持的邮箱。目前仅支持谷歌邮箱、QQ邮箱以及163邮箱，推荐使用谷歌邮箱。'); + } + + self::$mail->SMTPDebug = config('debug') ? 2 : 0; // Debug 0：关闭 1：客户端信息 2：客户端和服务端信息 + self::$mail->isSMTP(); // 告诉PHPMailer使用SMTP + self::$mail->Host = $host; // SMTP服务器 + self::$mail->SMTPAuth = true; // 启用SMTP身份验证 + self::$mail->Username = $username; // 账号 + self::$mail->Password = $password; // 密码或授权码 + self::$mail->SMTPSecure = $secure; // 将加密系统设置为使用 - ssl（不建议使用）或tls + self::$mail->Port = $port; // 设置SMTP端口号 - tsl使用587端口，ssl使用465端口 + self::$mail->CharSet = 'UTF-8'; // 防止中文邮件乱码 + self::$mail->setLanguage('zh_cn', VENDOR_PATH . '/phpmailer/phpmailer/language/'); // 设置语言 + self::$mail->setFrom($username, 'im robot'); // 发件人 + } + + return self::$mail; + } + + /** + * 发送邮件 + * + * @param string $subject 标题 + * @param string | array $content 正文 + * @param string $to 收件人，选传 + * @param string $template 模板，选传 + * + * @return bool + * @throws \Exception + */ + public static function send($subject, $content, $to = '', $template = '') + { + if (config('mail.enable') === false) { + system_log('由于没有启用邮件功能，故本次不通过邮件送信。'); + + return false; + } + + $to = $to ?: config('mail.to'); + if (!$to) { + throw new LlfException(env('ON_GITHUB_ACTIONS') ? 34520011 : 34520012); + } + + self::mail()->addAddress($to, config('mail.toName', '主人')); // 添加收件人，参数2选填 + self::mail()->addReplyTo(config('mail.replyTo', 'mybsdc@qq.com'), config('mail.replyToName', '作者')); // 备用回复地址，收到的回复的邮件将被发到此地址 + + /** + * 抄送和密送都是添加收件人，抄送方式下，被抄送者知道除被密送者外的所有的收件人，密送方式下， + * 被密送者知道所有的被抄送者，但不知道其它的被密送者。 + * 抄送好比@，密送好比私信。 + */ +// self::mail()->addCC('cc@example.com'); // 抄送 +// self::mail()->addBCC('bcc@example.com'); // 密送 + + // 添加附件，参数2选填 +// self::mail()->addAttachment('README.md', '说明.txt'); + + // 内容 + self::mail()->Subject = $subject; // 标题 + + /** + * 正文 + * 使用html文件内容作为正文，其中的图片将被base64编码，另确保html样式为内联形式，且某些样式可能需要!important方能正常显示， + * msgHTML方法的第二个参数指定html内容中图片的路径，在转换时会拼接html中图片的相对路径得到完整的路径，最右侧无需“/”，PHPMailer + * 源码里有加。css中的背景图片不会被转换，这是PHPMailer已知问题，建议外链。 + * 此处也可替换为： + * self::mail()->isHTML(true); // 设为html格式 + * self::mail()->Body = '正文'; // 支持html + * self::mail()->AltBody = 'This is an HTML-only message. To view it, activate HTML in your email application.'; // 纯文本消息正文。不支持html预览的邮件客户端将显示此预览消息，其它情况将显示正常的body + */ + $template = file_get_contents(RESOURCES_PATH . '/mail/' . ($template ?: 'default') . '.html'); + if (is_array($content)) { + array_unshift($content, $template); + $message = call_user_func_array('sprintf', $content); + } else if (is_string($content)) { + $message = $content; + } else { + throw new MailException('邮件内容格式错误，仅支持传入数组或字符串。'); + } + + self::mail()->msgHTML($message, APP_PATH . '/mail'); + + if (!self::mail()->send()) throw new MailException(self::mail()->ErrorInfo); + + return true; + } +} diff --git a/libs/PhpColor.php b/libs/PhpColor.php new file mode 100644 index 00000000..788356e0 --- /dev/null +++ b/libs/PhpColor.php @@ -0,0 +1,57 @@ +标签恢复，待原作者修正 + * + * @author mybsdc + * @date 2019/11/29 + * @time 10:52 + */ + +namespace Luolongfei\Lib; + +use Colors\Color; + +class PhpColor +{ + /** + * @var PhpColor + */ + protected static $instance; + + /** + * @var Color + */ + protected $colorInstance; + + public function __construct() + { + $this->colorInstance = new Color(); + + // Create my own style + $this->colorInstance->setUserStyles([ +// '自定义标签' => 'red', + ]); + } + + /** + * @return PhpColor + */ + public static function instance() + { + if (!self::$instance instanceof self) { + self::$instance = new self(); + } + + return self::$instance; + } + + /** + * @return Color + */ + public function getColorInstance() + { + return $this->colorInstance; + } +} \ No newline at end of file diff --git a/libs/TelegramBot.php b/libs/TelegramBot.php new file mode 100644 index 00000000..5106edba --- /dev/null +++ b/libs/TelegramBot.php @@ -0,0 +1,128 @@ + + * @date 2020/2/3 + * @time 15:23 + */ + +namespace Luolongfei\Lib; + +use GuzzleHttp\Client; + +class TelegramBot +{ + const TIMEOUT = 34.52; + + /** + * @var TelegramBot + */ + protected static $instance; + + /** + * @var string chat_id + */ + protected $chatID; + + /** + * @var string TelegramBot token + */ + protected $token; + + /** + * @var Client + */ + protected $client; + + public function __construct() + { + $this->chatID = config('telegram.chatID'); + $this->token = config('telegram.token'); + + $this->client = new Client([ + 'headers' => [ + 'Content-Type' => 'application/x-www-form-urlencoded' + ], + 'cookies' => false, + 'timeout' => self::TIMEOUT, + 'verify' => config('verifySSL'), +// 'http_errors' => false, + 'debug' => config('debug') + ]); + } + + protected static function instance() + { + if (!self::$instance instanceof self) { + self::$instance = new self(); + } + + return self::$instance; + } + + /** + * 发送消息 + * + * @param string $content 支持markdown语法，但记得对非标记部分进行转义 + * @param string $chatID 可单独指定chat_id参数 + * @param bool $isMarkdown 默认内容为Markdown格式，传否则为Html格式 + * @desc 注意对markdown标记占用的字符进行转义，否则无法正确发送，根据官方说明，以下字符如果不想被 Telegram Bot 识别为markdown标记， + * 应转义后传入，官方说明如下： + * In all other places characters '_‘, ’*‘, ’[‘, ’]‘, ’(‘, ’)‘, ’~‘, ’`‘, ’>‘, ’#‘, ’+‘, ’-‘, ’=‘, ’|‘, + * ’{‘, ’}‘, ’.‘, ’!‘ must be escaped with the preceding character ’\'. + * 如果你不转义，且恰好又不是正确的markdown语法，那 Telegram Bot 就只有报错了您勒 + * + * 官方markdown语法示例： + * *bold \*text* + * _italic \*text_ + * __underline__ + * ~strikethrough~ + * *bold _italic bold ~italic bold strikethrough~ __underline italic bold___ bold* + * [inline URL](http://www.example.com/) + * [inline mention of a user](tg://user?id=123456789) + * `inline fixed-width code` + * ``` + * pre-formatted fixed-width code block + * ``` + * ```python + * pre-formatted fixed-width code block written in the Python programming language + * ``` + * 需要注意的是，普通markdown语法中加粗字体使用的是“**正文**”的形式，但是 Telegram Bot 中是“*加粗我呀*”的形式，更多相关信息请 + * 参考官网：https://core.telegram.org/bots/api#sendmessage + * 另外我干掉了“_”、“~”、“-”、“.”和“>”关键字，分别对应斜体、删除线、无序列表、有序列表和引用符号，这几个我可能用不上:) + * + * @return bool + */ + public static function send(string $content, $chatID = '', $isMarkdown = true) + { + if (config('telegram.enable') === false) { + system_log('由于没有启用 Telegram Bot 功能，故本次不通过 Telegram Bot 送信。'); + + return false; + } + + if ($isMarkdown) { + // 这几个我可能用不上的markdown关键字我就直接干掉了 + $content = preg_replace('/([.>~_-])/i', '\\\\$1', $content); + } + + $telegramBot = self::instance(); + + $response = $telegramBot->client->post( + sprintf('https://api.telegram.org/bot%s/sendMessage', $telegramBot->token), + [ + 'form_params' => [ + 'chat_id' => $chatID ? $chatID : $telegramBot->chatID, + 'text' => $content, + 'parse_mode' => $isMarkdown ? 'MarkdownV2' : 'HTML', + 'disable_web_page_preview' => true, + 'disable_notification' => false + ], + ] + ); + $rp = json_decode((string)$response->getBody(), true); + + return $rp['ok'] ?? false; + } +} \ No newline at end of file diff --git a/logs/.gitignore b/logs/.gitignore new file mode 100644 index 00000000..005717ea --- /dev/null +++ b/logs/.gitignore @@ -0,0 +1,2 @@ +* +!.gitignore diff --git a/resources/lang/zh.php b/resources/lang/zh.php new file mode 100644 index 00000000..ef05975d --- /dev/null +++ b/resources/lang/zh.php @@ -0,0 +1,25 @@ + + * @date 2018/8/10 + * @time 14:39 + */ + +return [ + 'exception_msg' => [ + '34520001' => '检测到你尚未配置 freenom 账户信息，请修改 .env 文件中与账户相关的项，否则程序无法正常运作', + '34520002' => '登录 freenom 出错，未取得正确的 cookie 值，请检查账户和密码是否正确', + '34520003' => '域名数据匹配失败，可能是你暂时没有域名或者页面改版导致正则失效，请及时联系作者', + '34520004' => 'token 匹配失败，可能是页面改版导致正则失效，请及时联系作者', + '34520005' => 'putenv() 函数被禁用，无法写入环境变量导致程序无法正常运作，解决方案参考：https://github.com/luolongfei/freenom/issues/22', + '34520006' => sprintf('不支持 php7 以下的版本，当前版本为%s，请升级到 php7 以上', PHP_VERSION), + '34520007' => sprintf('已自动在%s目录下生成 .env 配置文件，请将配置文件中的各项内容修改为你自己的', ROOT_PATH), + '34520008' => sprintf('请将%s目录下的 .env.example 文件复制为 .env 文件，并将 .env 文件中的各项内容修改为你自己的', ROOT_PATH), + '34520009' => '登录 freenom 失败，请检查账户和密码是否正确', + '34520010' => '缺少 curl 模块，无法发送请求，请检查你的 php 环境并在编译时带上 curl 模块', + '34520011' => '你尚未配置收信邮箱，可能无法收到通知邮件。请在你 Fork 的本仓库下的 Settings > Secrets 画面追加一个名为 TO 的 secret 变量，变量对应的值为你最常用的邮箱地址，用于接收机器人邮箱发出的域名相关邮件', + '34520012' => '你尚未配置收信邮箱，可能无法收到通知邮件。请将 .env 文件中的 TO 对应的值改为你最常用的邮箱地址，用于接收机器人邮箱发出的域名相关邮件', + ], +]; diff --git a/resources/mail/LlfException.html b/resources/mail/LlfException.html new file mode 100644 index 00000000..e49ab584 --- /dev/null +++ b/resources/mail/LlfException.html @@ -0,0 +1,326 @@ + + + + + 邮件通知 + + + +

+
+
+
+
+
+
+

主人 +
呜哇哇哇~程序执行出错啦~ +
+
账户：%s +
异常原因： +
%s +

+
+
+ +
+

Im Robot

+

+ 邮件推送机器人
+ llf.push@gmail.com +

+
+
+
+
+
+
+
+
+ + \ No newline at end of file diff --git a/resources/mail/default.html b/resources/mail/default.html new file mode 100644 index 00000000..8086db92 --- /dev/null +++ b/resources/mail/default.html @@ -0,0 +1,366 @@ + + + + + 邮件通知 + + + +
+
+
+
+
+
+

主人 +
刚刚萌萌哒我有帮你续期域名哦~账户%s这次续期的结果如下 +
+ %s + %s +
emmmm，除以上内容外，我还帮小主看了一下：
%s更多信息可以参考Freenom官网哦~ +

+
+
+ +
+

Im Robot

+

+ 邮件推送机器人
+ llf.push@gmail.com +

+
+
+
+
+
+
+
+ + \ No newline at end of file diff --git a/resources/mail/images/163/163mail01.png b/resources/mail/images/163/163mail01.png new file mode 100644 index 00000000..1b985c68 Binary files /dev/null and b/resources/mail/images/163/163mail01.png differ diff --git a/resources/mail/images/163/163mail02.png b/resources/mail/images/163/163mail02.png new file mode 100644 index 00000000..61ab9b15 Binary files /dev/null and b/resources/mail/images/163/163mail02.png differ diff --git a/resources/mail/images/163/163mail03.png b/resources/mail/images/163/163mail03.png new file mode 100644 index 00000000..b6d932c8 Binary files /dev/null and b/resources/mail/images/163/163mail03.png differ diff --git a/resources/mail/images/Snipaste_2018-08-13_15-58-52.png b/resources/mail/images/Snipaste_2018-08-13_15-58-52.png new file mode 100644 index 00000000..9378342a Binary files /dev/null and b/resources/mail/images/Snipaste_2018-08-13_15-58-52.png differ diff --git a/resources/mail/images/github_actions/ga01.png b/resources/mail/images/github_actions/ga01.png new file mode 100644 index 00000000..a2df55f1 Binary files /dev/null and b/resources/mail/images/github_actions/ga01.png differ diff --git a/resources/mail/images/github_actions/ga02.png b/resources/mail/images/github_actions/ga02.png new file mode 100644 index 00000000..2dfd5dfd Binary files /dev/null and b/resources/mail/images/github_actions/ga02.png differ diff --git a/resources/mail/images/github_actions/ga03.png b/resources/mail/images/github_actions/ga03.png new file mode 100644 index 00000000..ad158e16 Binary files /dev/null and b/resources/mail/images/github_actions/ga03.png differ diff --git a/resources/mail/images/github_actions/ga04.png b/resources/mail/images/github_actions/ga04.png new file mode 100644 index 00000000..a1217ec6 Binary files /dev/null and b/resources/mail/images/github_actions/ga04.png differ diff --git a/resources/mail/images/github_actions/ga05.png b/resources/mail/images/github_actions/ga05.png new file mode 100644 index 00000000..a06da5d6 Binary files /dev/null and b/resources/mail/images/github_actions/ga05.png differ diff --git a/resources/mail/images/github_actions/ga06.png b/resources/mail/images/github_actions/ga06.png new file mode 100644 index 00000000..dd5a6e50 Binary files /dev/null and b/resources/mail/images/github_actions/ga06.png differ diff --git a/resources/mail/images/github_actions/ga07.png b/resources/mail/images/github_actions/ga07.png new file mode 100644 index 00000000..65b63af7 Binary files /dev/null and b/resources/mail/images/github_actions/ga07.png differ diff --git a/resources/mail/images/github_actions/ga08.png b/resources/mail/images/github_actions/ga08.png new file mode 100644 index 00000000..d4a6b265 Binary files /dev/null and b/resources/mail/images/github_actions/ga08.png differ diff --git a/resources/mail/images/gmail/gmail01.png b/resources/mail/images/gmail/gmail01.png new file mode 100644 index 00000000..ba7eee7f Binary files /dev/null and b/resources/mail/images/gmail/gmail01.png differ diff --git a/resources/mail/images/gmail/gmail01_en.png b/resources/mail/images/gmail/gmail01_en.png new file mode 100644 index 00000000..aef77856 Binary files /dev/null and b/resources/mail/images/gmail/gmail01_en.png differ diff --git a/resources/mail/images/gmail/gmail02.png b/resources/mail/images/gmail/gmail02.png new file mode 100644 index 00000000..fce1ef08 Binary files /dev/null and b/resources/mail/images/gmail/gmail02.png differ diff --git a/resources/mail/images/mmsgletter_2_bg.png b/resources/mail/images/mmsgletter_2_bg.png new file mode 100644 index 00000000..4b272fe8 Binary files /dev/null and b/resources/mail/images/mmsgletter_2_bg.png differ diff --git a/resources/mail/images/mmsgletter_2_bg_topline.png b/resources/mail/images/mmsgletter_2_bg_topline.png new file mode 100644 index 00000000..06e803f9 Binary files /dev/null and b/resources/mail/images/mmsgletter_2_bg_topline.png differ diff --git a/resources/mail/images/mmsgletter_2_btn.png b/resources/mail/images/mmsgletter_2_btn.png new file mode 100644 index 00000000..f0446f4d Binary files /dev/null and b/resources/mail/images/mmsgletter_2_btn.png differ diff --git a/resources/mail/images/mmsgletter_chat_left.gif b/resources/mail/images/mmsgletter_chat_left.gif new file mode 100644 index 00000000..a1832383 Binary files /dev/null and b/resources/mail/images/mmsgletter_chat_left.gif differ diff --git a/resources/mail/images/mmsgletter_chat_right.gif b/resources/mail/images/mmsgletter_chat_right.gif new file mode 100644 index 00000000..e0563bc9 Binary files /dev/null and b/resources/mail/images/mmsgletter_chat_right.gif differ diff --git a/resources/mail/images/pay.png b/resources/mail/images/pay.png new file mode 100644 index 00000000..2980e2a1 Binary files /dev/null and b/resources/mail/images/pay.png differ diff --git a/resources/mail/images/qq/qq01.png b/resources/mail/images/qq/qq01.png new file mode 100644 index 00000000..0638cf2a Binary files /dev/null and b/resources/mail/images/qq/qq01.png differ diff --git a/resources/mail/images/qq/qq02.png b/resources/mail/images/qq/qq02.png new file mode 100644 index 00000000..9e29a906 Binary files /dev/null and b/resources/mail/images/qq/qq02.png differ diff --git a/resources/mail/images/qq/qq03.png b/resources/mail/images/qq/qq03.png new file mode 100644 index 00000000..2e424b29 Binary files /dev/null and b/resources/mail/images/qq/qq03.png differ diff --git a/resources/mail/images/qq/qq04.png b/resources/mail/images/qq/qq04.png new file mode 100644 index 00000000..f729f90e Binary files /dev/null and b/resources/mail/images/qq/qq04.png differ diff --git a/resources/mail/images/ting.jpg b/resources/mail/images/ting.jpg new file mode 100644 index 00000000..f7bc8d80 Binary files /dev/null and b/resources/mail/images/ting.jpg differ diff --git a/resources/mail/notice.html b/resources/mail/notice.html new file mode 100644 index 00000000..3a6d6ce9 --- /dev/null +++ b/resources/mail/notice.html @@ -0,0 +1,366 @@ + + + + + 邮件通知 + + + +
+
+
+
+
+
+

+
我刚刚帮小主看了一下，账户%s今天并没有需要续期的域名。所有域名情况如下： +
+
%s更多信息可以参考Freenom官网哦~ +
+
（如果你不想每次执行都收到推送，请将 .env 中 NOTICE_FREQ 的值设为0，使程序只在有续期操作时才推送） +

+
+
+ +
+

Im Robot

+

+ 邮件推送机器人
+ llf.push@gmail.com +

+
+
+
+
+
+
+
+ + diff --git a/resources/screenshot/.gitkeep b/resources/screenshot/.gitkeep new file mode 100644 index 00000000..e69de29b diff --git a/resources/screenshot/lie.jpg b/resources/screenshot/lie.jpg new file mode 100644 index 00000000..fce03a74 Binary files /dev/null and b/resources/screenshot/lie.jpg differ diff --git a/resources/screenshot/lizhi.jpg b/resources/screenshot/lizhi.jpg new file mode 100644 index 00000000..ffc025a7 Binary files /dev/null and b/resources/screenshot/lizhi.jpg differ diff --git a/resources/screenshot/scf.png b/resources/screenshot/scf.png new file mode 100644 index 00000000..abfec117 Binary files /dev/null and b/resources/screenshot/scf.png differ diff --git a/run b/run new file mode 100644 index 00000000..e603c1f3 --- /dev/null +++ b/run @@ -0,0 +1,74 @@ +#!/usr/bin/env php + + * @date 2019/3/2 + * @time 11:05 + * @link https://github.com/luolongfei/freenom + */ + +error_reporting(E_ERROR); +ini_set('display_errors', 1); +set_time_limit(0); + +define('IS_CLI', PHP_SAPI === 'cli'); +define('DS', DIRECTORY_SEPARATOR); +define('ROOT_PATH', realpath(__DIR__)); +define('VENDOR_PATH', realpath(ROOT_PATH . '/vendor')); +define('APP_PATH', realpath(ROOT_PATH . '/app')); +define('RESOURCES_PATH', realpath(ROOT_PATH . '/resources')); + +date_default_timezone_set('Asia/Shanghai'); + +/** + * 注册错误处理 + */ +register_shutdown_function('customize_error_handler'); + +/** + * 注册异常处理 + */ +set_exception_handler('exception_handler'); + +require VENDOR_PATH . '/autoload.php'; + +use Luolongfei\Lib\Log; +use Luolongfei\Lib\Mail; +use Luolongfei\Lib\TelegramBot; + +/** + * @throws Exception + */ +function customize_error_handler() +{ + if (!is_null($error = error_get_last())) { + Log::error('程序意外终止', $error); +// Mail::send('主人，程序意外终止', '具体情况我也不清楚，请查看服务器日志定位问题。'); +// TelegramBot::send('主人，程序意外终止，具体情况我也不清楚，请查看服务器日志定位问题。'); + } +} + +/** + * @param \Exception $e + * + * @throws \Exception + */ +function exception_handler($e) +{ + Log::error('未捕获的异常：' . $e->getMessage()); + Mail::send('主人，未捕获的异常', "具体的异常内容是：\n" . $e->getMessage()); + TelegramBot::send('主人，发现未捕获的异常：' . $e->getMessage()); +} + +try { + system_check(); + + $class = sprintf('Luolongfei\App\Console\%s', get_argv('c', 'FreeNom')); + $fn = get_argv('m', 'handle'); + + $class::instance()->$fn(); +} catch (\Exception $e) { + system_log(sprintf('执行出错：%s', $e->getMessage()), $e->getTrace()); +} diff --git a/vendor/autoload.php b/vendor/autoload.php new file mode 100644 index 00000000..efaf17fd --- /dev/null +++ b/vendor/autoload.php @@ -0,0 +1,7 @@ +=5.4.0" + }, + "require-dev": { + "phpunit/phpunit": "~4.0" + }, + "autoload": { + "psr-4": { + "Bramus\\Ansi\\": "src/" + } + }, + "scripts": { + "test": "vendor/bin/phpunit" + } +} diff --git a/vendor/bramus/ansi-php/composer.lock b/vendor/bramus/ansi-php/composer.lock new file mode 100644 index 00000000..75ca2823 --- /dev/null +++ b/vendor/bramus/ansi-php/composer.lock @@ -0,0 +1,1199 @@ +{ + "_readme": [ + "This file locks the dependencies of your project to a known state", + "Read more about it at https://getcomposer.org/doc/01-basic-usage.md#installing-dependencies", + "This file is @generated automatically" + ], + "content-hash": "2bd803cd6028d92b2de740f9bff2af1d", + "packages": [], + "packages-dev": [ + { + "name": "doctrine/instantiator", + "version": "1.0.5", + "source": { + "type": "git", + "url": "https://github.com/doctrine/instantiator.git", + "reference": "8e884e78f9f0eb1329e445619e04456e64d8051d" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/doctrine/instantiator/zipball/8e884e78f9f0eb1329e445619e04456e64d8051d", + "reference": "8e884e78f9f0eb1329e445619e04456e64d8051d", + "shasum": "" + }, + "require": { + "php": ">=5.3,<8.0-DEV" + }, + "require-dev": { + "athletic/athletic": "~0.1.8", + "ext-pdo": "*", + "ext-phar": "*", + "phpunit/phpunit": "~4.0", + "squizlabs/php_codesniffer": "~2.0" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.0.x-dev" + } + }, + "autoload": { + "psr-4": { + "Doctrine\\Instantiator\\": "src/Doctrine/Instantiator/" + } + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Marco Pivetta", + "email": "ocramius@gmail.com", + "homepage": "http://ocramius.github.com/" + } + ], + "description": "A small, lightweight utility to instantiate objects in PHP without invoking their constructors", + "homepage": "https://github.com/doctrine/instantiator", + "keywords": [ + "constructor", + "instantiate" + ], + "time": "2015-06-14T21:17:01+00:00" + }, + { + "name": "phpdocumentor/reflection-common", + "version": "1.0.1", + "source": { + "type": "git", + "url": "https://github.com/phpDocumentor/ReflectionCommon.git", + "reference": "21bdeb5f65d7ebf9f43b1b25d404f87deab5bfb6" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/phpDocumentor/ReflectionCommon/zipball/21bdeb5f65d7ebf9f43b1b25d404f87deab5bfb6", + "reference": "21bdeb5f65d7ebf9f43b1b25d404f87deab5bfb6", + "shasum": "" + }, + "require": { + "php": ">=5.5" + }, + "require-dev": { + "phpunit/phpunit": "^4.6" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.0.x-dev" + } + }, + "autoload": { + "psr-4": { + "phpDocumentor\\Reflection\\": [ + "src" + ] + } + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Jaap van Otterdijk", + "email": "opensource@ijaap.nl" + } + ], + "description": "Common reflection classes used by phpdocumentor to reflect the code structure", + "homepage": "http://www.phpdoc.org", + "keywords": [ + "FQSEN", + "phpDocumentor", + "phpdoc", + "reflection", + "static analysis" + ], + "time": "2017-09-11T18:02:19+00:00" + }, + { + "name": "phpdocumentor/reflection-docblock", + "version": "3.3.2", + "source": { + "type": "git", + "url": "https://github.com/phpDocumentor/ReflectionDocBlock.git", + "reference": "bf329f6c1aadea3299f08ee804682b7c45b326a2" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/phpDocumentor/ReflectionDocBlock/zipball/bf329f6c1aadea3299f08ee804682b7c45b326a2", + "reference": "bf329f6c1aadea3299f08ee804682b7c45b326a2", + "shasum": "" + }, + "require": { + "php": "^5.6 || ^7.0", + "phpdocumentor/reflection-common": "^1.0.0", + "phpdocumentor/type-resolver": "^0.4.0", + "webmozart/assert": "^1.0" + }, + "require-dev": { + "mockery/mockery": "^0.9.4", + "phpunit/phpunit": "^4.4" + }, + "type": "library", + "autoload": { + "psr-4": { + "phpDocumentor\\Reflection\\": [ + "src/" + ] + } + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Mike van Riel", + "email": "me@mikevanriel.com" + } + ], + "description": "With this component, a library can provide support for annotations via DocBlocks or otherwise retrieve information that is embedded in a DocBlock.", + "time": "2017-11-10T14:09:06+00:00" + }, + { + "name": "phpdocumentor/type-resolver", + "version": "0.4.0", + "source": { + "type": "git", + "url": "https://github.com/phpDocumentor/TypeResolver.git", + "reference": "9c977708995954784726e25d0cd1dddf4e65b0f7" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/phpDocumentor/TypeResolver/zipball/9c977708995954784726e25d0cd1dddf4e65b0f7", + "reference": "9c977708995954784726e25d0cd1dddf4e65b0f7", + "shasum": "" + }, + "require": { + "php": "^5.5 || ^7.0", + "phpdocumentor/reflection-common": "^1.0" + }, + "require-dev": { + "mockery/mockery": "^0.9.4", + "phpunit/phpunit": "^5.2||^4.8.24" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.0.x-dev" + } + }, + "autoload": { + "psr-4": { + "phpDocumentor\\Reflection\\": [ + "src/" + ] + } + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Mike van Riel", + "email": "me@mikevanriel.com" + } + ], + "time": "2017-07-14T14:27:02+00:00" + }, + { + "name": "phpspec/prophecy", + "version": "1.8.0", + "source": { + "type": "git", + "url": "https://github.com/phpspec/prophecy.git", + "reference": "4ba436b55987b4bf311cb7c6ba82aa528aac0a06" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/phpspec/prophecy/zipball/4ba436b55987b4bf311cb7c6ba82aa528aac0a06", + "reference": "4ba436b55987b4bf311cb7c6ba82aa528aac0a06", + "shasum": "" + }, + "require": { + "doctrine/instantiator": "^1.0.2", + "php": "^5.3|^7.0", + "phpdocumentor/reflection-docblock": "^2.0|^3.0.2|^4.0", + "sebastian/comparator": "^1.1|^2.0|^3.0", + "sebastian/recursion-context": "^1.0|^2.0|^3.0" + }, + "require-dev": { + "phpspec/phpspec": "^2.5|^3.2", + "phpunit/phpunit": "^4.8.35 || ^5.7 || ^6.5 || ^7.1" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.8.x-dev" + } + }, + "autoload": { + "psr-0": { + "Prophecy\\": "src/" + } + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Konstantin Kudryashov", + "email": "ever.zet@gmail.com", + "homepage": "http://everzet.com" + }, + { + "name": "Marcello Duarte", + "email": "marcello.duarte@gmail.com" + } + ], + "description": "Highly opinionated mocking framework for PHP 5.3+", + "homepage": "https://github.com/phpspec/prophecy", + "keywords": [ + "Double", + "Dummy", + "fake", + "mock", + "spy", + "stub" + ], + "time": "2018-08-05T17:53:17+00:00" + }, + { + "name": "phpunit/php-code-coverage", + "version": "2.2.4", + "source": { + "type": "git", + "url": "https://github.com/sebastianbergmann/php-code-coverage.git", + "reference": "eabf68b476ac7d0f73793aada060f1c1a9bf8979" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/sebastianbergmann/php-code-coverage/zipball/eabf68b476ac7d0f73793aada060f1c1a9bf8979", + "reference": "eabf68b476ac7d0f73793aada060f1c1a9bf8979", + "shasum": "" + }, + "require": { + "php": ">=5.3.3", + "phpunit/php-file-iterator": "~1.3", + "phpunit/php-text-template": "~1.2", + "phpunit/php-token-stream": "~1.3", + "sebastian/environment": "^1.3.2", + "sebastian/version": "~1.0" + }, + "require-dev": { + "ext-xdebug": ">=2.1.4", + "phpunit/phpunit": "~4" + }, + "suggest": { + "ext-dom": "*", + "ext-xdebug": ">=2.2.1", + "ext-xmlwriter": "*" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "2.2.x-dev" + } + }, + "autoload": { + "classmap": [ + "src/" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "BSD-3-Clause" + ], + "authors": [ + { + "name": "Sebastian Bergmann", + "email": "sb@sebastian-bergmann.de", + "role": "lead" + } + ], + "description": "Library that provides collection, processing, and rendering functionality for PHP code coverage information.", + "homepage": "https://github.com/sebastianbergmann/php-code-coverage", + "keywords": [ + "coverage", + "testing", + "xunit" + ], + "time": "2015-10-06T15:47:00+00:00" + }, + { + "name": "phpunit/php-file-iterator", + "version": "1.4.5", + "source": { + "type": "git", + "url": "https://github.com/sebastianbergmann/php-file-iterator.git", + "reference": "730b01bc3e867237eaac355e06a36b85dd93a8b4" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/sebastianbergmann/php-file-iterator/zipball/730b01bc3e867237eaac355e06a36b85dd93a8b4", + "reference": "730b01bc3e867237eaac355e06a36b85dd93a8b4", + "shasum": "" + }, + "require": { + "php": ">=5.3.3" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.4.x-dev" + } + }, + "autoload": { + "classmap": [ + "src/" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "BSD-3-Clause" + ], + "authors": [ + { + "name": "Sebastian Bergmann", + "email": "sb@sebastian-bergmann.de", + "role": "lead" + } + ], + "description": "FilterIterator implementation that filters files based on a list of suffixes.", + "homepage": "https://github.com/sebastianbergmann/php-file-iterator/", + "keywords": [ + "filesystem", + "iterator" + ], + "time": "2017-11-27T13:52:08+00:00" + }, + { + "name": "phpunit/php-text-template", + "version": "1.2.1", + "source": { + "type": "git", + "url": "https://github.com/sebastianbergmann/php-text-template.git", + "reference": "31f8b717e51d9a2afca6c9f046f5d69fc27c8686" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/sebastianbergmann/php-text-template/zipball/31f8b717e51d9a2afca6c9f046f5d69fc27c8686", + "reference": "31f8b717e51d9a2afca6c9f046f5d69fc27c8686", + "shasum": "" + }, + "require": { + "php": ">=5.3.3" + }, + "type": "library", + "autoload": { + "classmap": [ + "src/" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "BSD-3-Clause" + ], + "authors": [ + { + "name": "Sebastian Bergmann", + "email": "sebastian@phpunit.de", + "role": "lead" + } + ], + "description": "Simple template engine.", + "homepage": "https://github.com/sebastianbergmann/php-text-template/", + "keywords": [ + "template" + ], + "time": "2015-06-21T13:50:34+00:00" + }, + { + "name": "phpunit/php-timer", + "version": "1.0.9", + "source": { + "type": "git", + "url": "https://github.com/sebastianbergmann/php-timer.git", + "reference": "3dcf38ca72b158baf0bc245e9184d3fdffa9c46f" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/sebastianbergmann/php-timer/zipball/3dcf38ca72b158baf0bc245e9184d3fdffa9c46f", + "reference": "3dcf38ca72b158baf0bc245e9184d3fdffa9c46f", + "shasum": "" + }, + "require": { + "php": "^5.3.3 || ^7.0" + }, + "require-dev": { + "phpunit/phpunit": "^4.8.35 || ^5.7 || ^6.0" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.0-dev" + } + }, + "autoload": { + "classmap": [ + "src/" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "BSD-3-Clause" + ], + "authors": [ + { + "name": "Sebastian Bergmann", + "email": "sb@sebastian-bergmann.de", + "role": "lead" + } + ], + "description": "Utility class for timing", + "homepage": "https://github.com/sebastianbergmann/php-timer/", + "keywords": [ + "timer" + ], + "time": "2017-02-26T11:10:40+00:00" + }, + { + "name": "phpunit/php-token-stream", + "version": "1.4.12", + "source": { + "type": "git", + "url": "https://github.com/sebastianbergmann/php-token-stream.git", + "reference": "1ce90ba27c42e4e44e6d8458241466380b51fa16" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/sebastianbergmann/php-token-stream/zipball/1ce90ba27c42e4e44e6d8458241466380b51fa16", + "reference": "1ce90ba27c42e4e44e6d8458241466380b51fa16", + "shasum": "" + }, + "require": { + "ext-tokenizer": "*", + "php": ">=5.3.3" + }, + "require-dev": { + "phpunit/phpunit": "~4.2" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.4-dev" + } + }, + "autoload": { + "classmap": [ + "src/" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "BSD-3-Clause" + ], + "authors": [ + { + "name": "Sebastian Bergmann", + "email": "sebastian@phpunit.de" + } + ], + "description": "Wrapper around PHP's tokenizer extension.", + "homepage": "https://github.com/sebastianbergmann/php-token-stream/", + "keywords": [ + "tokenizer" + ], + "time": "2017-12-04T08:55:13+00:00" + }, + { + "name": "phpunit/phpunit", + "version": "4.8.36", + "source": { + "type": "git", + "url": "https://github.com/sebastianbergmann/phpunit.git", + "reference": "46023de9a91eec7dfb06cc56cb4e260017298517" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/sebastianbergmann/phpunit/zipball/46023de9a91eec7dfb06cc56cb4e260017298517", + "reference": "46023de9a91eec7dfb06cc56cb4e260017298517", + "shasum": "" + }, + "require": { + "ext-dom": "*", + "ext-json": "*", + "ext-pcre": "*", + "ext-reflection": "*", + "ext-spl": "*", + "php": ">=5.3.3", + "phpspec/prophecy": "^1.3.1", + "phpunit/php-code-coverage": "~2.1", + "phpunit/php-file-iterator": "~1.4", + "phpunit/php-text-template": "~1.2", + "phpunit/php-timer": "^1.0.6", + "phpunit/phpunit-mock-objects": "~2.3", + "sebastian/comparator": "~1.2.2", + "sebastian/diff": "~1.2", + "sebastian/environment": "~1.3", + "sebastian/exporter": "~1.2", + "sebastian/global-state": "~1.0", + "sebastian/version": "~1.0", + "symfony/yaml": "~2.1|~3.0" + }, + "suggest": { + "phpunit/php-invoker": "~1.1" + }, + "bin": [ + "phpunit" + ], + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "4.8.x-dev" + } + }, + "autoload": { + "classmap": [ + "src/" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "BSD-3-Clause" + ], + "authors": [ + { + "name": "Sebastian Bergmann", + "email": "sebastian@phpunit.de", + "role": "lead" + } + ], + "description": "The PHP Unit Testing framework.", + "homepage": "https://phpunit.de/", + "keywords": [ + "phpunit", + "testing", + "xunit" + ], + "time": "2017-06-21T08:07:12+00:00" + }, + { + "name": "phpunit/phpunit-mock-objects", + "version": "2.3.8", + "source": { + "type": "git", + "url": "https://github.com/sebastianbergmann/phpunit-mock-objects.git", + "reference": "ac8e7a3db35738d56ee9a76e78a4e03d97628983" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/sebastianbergmann/phpunit-mock-objects/zipball/ac8e7a3db35738d56ee9a76e78a4e03d97628983", + "reference": "ac8e7a3db35738d56ee9a76e78a4e03d97628983", + "shasum": "" + }, + "require": { + "doctrine/instantiator": "^1.0.2", + "php": ">=5.3.3", + "phpunit/php-text-template": "~1.2", + "sebastian/exporter": "~1.2" + }, + "require-dev": { + "phpunit/phpunit": "~4.4" + }, + "suggest": { + "ext-soap": "*" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "2.3.x-dev" + } + }, + "autoload": { + "classmap": [ + "src/" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "BSD-3-Clause" + ], + "authors": [ + { + "name": "Sebastian Bergmann", + "email": "sb@sebastian-bergmann.de", + "role": "lead" + } + ], + "description": "Mock Object library for PHPUnit", + "homepage": "https://github.com/sebastianbergmann/phpunit-mock-objects/", + "keywords": [ + "mock", + "xunit" + ], + "time": "2015-10-02T06:51:40+00:00" + }, + { + "name": "sebastian/comparator", + "version": "1.2.4", + "source": { + "type": "git", + "url": "https://github.com/sebastianbergmann/comparator.git", + "reference": "2b7424b55f5047b47ac6e5ccb20b2aea4011d9be" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/sebastianbergmann/comparator/zipball/2b7424b55f5047b47ac6e5ccb20b2aea4011d9be", + "reference": "2b7424b55f5047b47ac6e5ccb20b2aea4011d9be", + "shasum": "" + }, + "require": { + "php": ">=5.3.3", + "sebastian/diff": "~1.2", + "sebastian/exporter": "~1.2 || ~2.0" + }, + "require-dev": { + "phpunit/phpunit": "~4.4" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.2.x-dev" + } + }, + "autoload": { + "classmap": [ + "src/" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "BSD-3-Clause" + ], + "authors": [ + { + "name": "Jeff Welch", + "email": "whatthejeff@gmail.com" + }, + { + "name": "Volker Dusch", + "email": "github@wallbash.com" + }, + { + "name": "Bernhard Schussek", + "email": "bschussek@2bepublished.at" + }, + { + "name": "Sebastian Bergmann", + "email": "sebastian@phpunit.de" + } + ], + "description": "Provides the functionality to compare PHP values for equality", + "homepage": "http://www.github.com/sebastianbergmann/comparator", + "keywords": [ + "comparator", + "compare", + "equality" + ], + "time": "2017-01-29T09:50:25+00:00" + }, + { + "name": "sebastian/diff", + "version": "1.4.3", + "source": { + "type": "git", + "url": "https://github.com/sebastianbergmann/diff.git", + "reference": "7f066a26a962dbe58ddea9f72a4e82874a3975a4" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/sebastianbergmann/diff/zipball/7f066a26a962dbe58ddea9f72a4e82874a3975a4", + "reference": "7f066a26a962dbe58ddea9f72a4e82874a3975a4", + "shasum": "" + }, + "require": { + "php": "^5.3.3 || ^7.0" + }, + "require-dev": { + "phpunit/phpunit": "^4.8.35 || ^5.7 || ^6.0" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.4-dev" + } + }, + "autoload": { + "classmap": [ + "src/" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "BSD-3-Clause" + ], + "authors": [ + { + "name": "Kore Nordmann", + "email": "mail@kore-nordmann.de" + }, + { + "name": "Sebastian Bergmann", + "email": "sebastian@phpunit.de" + } + ], + "description": "Diff implementation", + "homepage": "https://github.com/sebastianbergmann/diff", + "keywords": [ + "diff" + ], + "time": "2017-05-22T07:24:03+00:00" + }, + { + "name": "sebastian/environment", + "version": "1.3.8", + "source": { + "type": "git", + "url": "https://github.com/sebastianbergmann/environment.git", + "reference": "be2c607e43ce4c89ecd60e75c6a85c126e754aea" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/sebastianbergmann/environment/zipball/be2c607e43ce4c89ecd60e75c6a85c126e754aea", + "reference": "be2c607e43ce4c89ecd60e75c6a85c126e754aea", + "shasum": "" + }, + "require": { + "php": "^5.3.3 || ^7.0" + }, + "require-dev": { + "phpunit/phpunit": "^4.8 || ^5.0" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.3.x-dev" + } + }, + "autoload": { + "classmap": [ + "src/" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "BSD-3-Clause" + ], + "authors": [ + { + "name": "Sebastian Bergmann", + "email": "sebastian@phpunit.de" + } + ], + "description": "Provides functionality to handle HHVM/PHP environments", + "homepage": "http://www.github.com/sebastianbergmann/environment", + "keywords": [ + "Xdebug", + "environment", + "hhvm" + ], + "time": "2016-08-18T05:49:44+00:00" + }, + { + "name": "sebastian/exporter", + "version": "1.2.2", + "source": { + "type": "git", + "url": "https://github.com/sebastianbergmann/exporter.git", + "reference": "42c4c2eec485ee3e159ec9884f95b431287edde4" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/sebastianbergmann/exporter/zipball/42c4c2eec485ee3e159ec9884f95b431287edde4", + "reference": "42c4c2eec485ee3e159ec9884f95b431287edde4", + "shasum": "" + }, + "require": { + "php": ">=5.3.3", + "sebastian/recursion-context": "~1.0" + }, + "require-dev": { + "ext-mbstring": "*", + "phpunit/phpunit": "~4.4" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.3.x-dev" + } + }, + "autoload": { + "classmap": [ + "src/" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "BSD-3-Clause" + ], + "authors": [ + { + "name": "Jeff Welch", + "email": "whatthejeff@gmail.com" + }, + { + "name": "Volker Dusch", + "email": "github@wallbash.com" + }, + { + "name": "Bernhard Schussek", + "email": "bschussek@2bepublished.at" + }, + { + "name": "Sebastian Bergmann", + "email": "sebastian@phpunit.de" + }, + { + "name": "Adam Harvey", + "email": "aharvey@php.net" + } + ], + "description": "Provides the functionality to export PHP variables for visualization", + "homepage": "http://www.github.com/sebastianbergmann/exporter", + "keywords": [ + "export", + "exporter" + ], + "time": "2016-06-17T09:04:28+00:00" + }, + { + "name": "sebastian/global-state", + "version": "1.1.1", + "source": { + "type": "git", + "url": "https://github.com/sebastianbergmann/global-state.git", + "reference": "bc37d50fea7d017d3d340f230811c9f1d7280af4" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/sebastianbergmann/global-state/zipball/bc37d50fea7d017d3d340f230811c9f1d7280af4", + "reference": "bc37d50fea7d017d3d340f230811c9f1d7280af4", + "shasum": "" + }, + "require": { + "php": ">=5.3.3" + }, + "require-dev": { + "phpunit/phpunit": "~4.2" + }, + "suggest": { + "ext-uopz": "*" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.0-dev" + } + }, + "autoload": { + "classmap": [ + "src/" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "BSD-3-Clause" + ], + "authors": [ + { + "name": "Sebastian Bergmann", + "email": "sebastian@phpunit.de" + } + ], + "description": "Snapshotting of global state", + "homepage": "http://www.github.com/sebastianbergmann/global-state", + "keywords": [ + "global state" + ], + "time": "2015-10-12T03:26:01+00:00" + }, + { + "name": "sebastian/recursion-context", + "version": "1.0.5", + "source": { + "type": "git", + "url": "https://github.com/sebastianbergmann/recursion-context.git", + "reference": "b19cc3298482a335a95f3016d2f8a6950f0fbcd7" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/sebastianbergmann/recursion-context/zipball/b19cc3298482a335a95f3016d2f8a6950f0fbcd7", + "reference": "b19cc3298482a335a95f3016d2f8a6950f0fbcd7", + "shasum": "" + }, + "require": { + "php": ">=5.3.3" + }, + "require-dev": { + "phpunit/phpunit": "~4.4" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.0.x-dev" + } + }, + "autoload": { + "classmap": [ + "src/" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "BSD-3-Clause" + ], + "authors": [ + { + "name": "Jeff Welch", + "email": "whatthejeff@gmail.com" + }, + { + "name": "Sebastian Bergmann", + "email": "sebastian@phpunit.de" + }, + { + "name": "Adam Harvey", + "email": "aharvey@php.net" + } + ], + "description": "Provides functionality to recursively process PHP variables", + "homepage": "http://www.github.com/sebastianbergmann/recursion-context", + "time": "2016-10-03T07:41:43+00:00" + }, + { + "name": "sebastian/version", + "version": "1.0.6", + "source": { + "type": "git", + "url": "https://github.com/sebastianbergmann/version.git", + "reference": "58b3a85e7999757d6ad81c787a1fbf5ff6c628c6" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/sebastianbergmann/version/zipball/58b3a85e7999757d6ad81c787a1fbf5ff6c628c6", + "reference": "58b3a85e7999757d6ad81c787a1fbf5ff6c628c6", + "shasum": "" + }, + "type": "library", + "autoload": { + "classmap": [ + "src/" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "BSD-3-Clause" + ], + "authors": [ + { + "name": "Sebastian Bergmann", + "email": "sebastian@phpunit.de", + "role": "lead" + } + ], + "description": "Library that helps with managing the version number of Git-hosted PHP projects", + "homepage": "https://github.com/sebastianbergmann/version", + "time": "2015-06-21T13:59:46+00:00" + }, + { + "name": "symfony/polyfill-ctype", + "version": "v1.10.0", + "source": { + "type": "git", + "url": "https://github.com/symfony/polyfill-ctype.git", + "reference": "e3d826245268269cd66f8326bd8bc066687b4a19" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/symfony/polyfill-ctype/zipball/e3d826245268269cd66f8326bd8bc066687b4a19", + "reference": "e3d826245268269cd66f8326bd8bc066687b4a19", + "shasum": "" + }, + "require": { + "php": ">=5.3.3" + }, + "suggest": { + "ext-ctype": "For best performance" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.9-dev" + } + }, + "autoload": { + "psr-4": { + "Symfony\\Polyfill\\Ctype\\": "" + }, + "files": [ + "bootstrap.php" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Symfony Community", + "homepage": "https://symfony.com/contributors" + }, + { + "name": "Gert de Pagter", + "email": "BackEndTea@gmail.com" + } + ], + "description": "Symfony polyfill for ctype functions", + "homepage": "https://symfony.com", + "keywords": [ + "compatibility", + "ctype", + "polyfill", + "portable" + ], + "time": "2018-08-06T14:22:27+00:00" + }, + { + "name": "symfony/yaml", + "version": "v3.4.22", + "source": { + "type": "git", + "url": "https://github.com/symfony/yaml.git", + "reference": "ba11776e9e6c15ad5759a07bffb15899bac75c2d" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/symfony/yaml/zipball/ba11776e9e6c15ad5759a07bffb15899bac75c2d", + "reference": "ba11776e9e6c15ad5759a07bffb15899bac75c2d", + "shasum": "" + }, + "require": { + "php": "^5.5.9|>=7.0.8", + "symfony/polyfill-ctype": "~1.8" + }, + "conflict": { + "symfony/console": "<3.4" + }, + "require-dev": { + "symfony/console": "~3.4|~4.0" + }, + "suggest": { + "symfony/console": "For validating YAML files using the lint command" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "3.4-dev" + } + }, + "autoload": { + "psr-4": { + "Symfony\\Component\\Yaml\\": "" + }, + "exclude-from-classmap": [ + "/Tests/" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Fabien Potencier", + "email": "fabien@symfony.com" + }, + { + "name": "Symfony Community", + "homepage": "https://symfony.com/contributors" + } + ], + "description": "Symfony Yaml Component", + "homepage": "https://symfony.com", + "time": "2019-01-16T10:59:17+00:00" + }, + { + "name": "webmozart/assert", + "version": "1.4.0", + "source": { + "type": "git", + "url": "https://github.com/webmozart/assert.git", + "reference": "83e253c8e0be5b0257b881e1827274667c5c17a9" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/webmozart/assert/zipball/83e253c8e0be5b0257b881e1827274667c5c17a9", + "reference": "83e253c8e0be5b0257b881e1827274667c5c17a9", + "shasum": "" + }, + "require": { + "php": "^5.3.3 || ^7.0", + "symfony/polyfill-ctype": "^1.8" + }, + "require-dev": { + "phpunit/phpunit": "^4.6", + "sebastian/version": "^1.0.1" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.3-dev" + } + }, + "autoload": { + "psr-4": { + "Webmozart\\Assert\\": "src/" + } + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Bernhard Schussek", + "email": "bschussek@gmail.com" + } + ], + "description": "Assertions to validate method input/output with nice error messages.", + "keywords": [ + "assert", + "check", + "validate" + ], + "time": "2018-12-25T11:19:39+00:00" + } + ], + "aliases": [], + "minimum-stability": "stable", + "stability-flags": [], + "prefer-stable": false, + "prefer-lowest": false, + "platform": { + "php": ">=5.4.0" + }, + "platform-dev": [] +} diff --git a/vendor/bramus/ansi-php/phpunit.xml.dist b/vendor/bramus/ansi-php/phpunit.xml.dist new file mode 100644 index 00000000..6496a88c --- /dev/null +++ b/vendor/bramus/ansi-php/phpunit.xml.dist @@ -0,0 +1,14 @@ + + + + + + tests/ + + + + + src/ + + + \ No newline at end of file diff --git a/vendor/bramus/ansi-php/readme.md b/vendor/bramus/ansi-php/readme.md new file mode 100644 index 00000000..0fc0ca7e --- /dev/null +++ b/vendor/bramus/ansi-php/readme.md @@ -0,0 +1,337 @@ +# ANSI PHP + +[![Build Status](https://img.shields.io/travis/bramus/ansi-php.svg?style=flat-square)](http://travis-ci.org/bramus/ansi-php) [![Source](http://img.shields.io/badge/source-bramus/ansi--php-blue.svg?style=flat-square)](https://github.com/bramus/ansi-php) [![Version](https://img.shields.io/packagist/v/bramus/ansi-php.svg?style=flat-square)](https://packagist.org/packages/bramus/ansi-php) [![Downloads](https://img.shields.io/packagist/dt/bramus/ansi-php.svg?style=flat-square)](https://packagist.org/packages/bramus/ansi-php/stats) [![License](https://img.shields.io/packagist/l/bramus/ansi-php.svg?style=flat-square)](https://github.com/bramus/ansi-php/blob/master/LICENSE) + +ANSI Control Functions and ANSI Control Sequences for PHP CLI Apps + +Built by Bramus! - [https://www.bram.us/](https://www.bram.us/) + +## About + +`bramus/ansi-php` is a set of classes to working with ANSI Control Functions and ANSI Control Sequences on text based terminals. + +- ANSI Control Functions control an action such as line spacing, paging, or data flow. +- ANSI Control Sequences allow one to clear the screen, move the cursor, set text colors, etc. + +_(Sidenote: An “ANSI Escape Sequence” is a special type of “ANSI Control Sequence” which starts with the ESC ANSI Control Function. The terms are not interchangeable.)_ + +## Features + +When it comes to ANSI Control Functions `bramus/ansi-php` supports: + +- `BS`: Backspace +- `BEL`: Bell +- `CR`: Carriage Return +- `ESC`: Escape +- `LF`: Line Feed +- `TAB`: Tab + +When it comes to ANSI Escape Sequences `bramus/ansi-php` supports: + +- SGR _(Select Graphic Rendition)_: Manipulate text styling (bold, underline, blink, colors, etc.). +- ED _(Erase Display)_: Erase (parts of) the display. +- EL _(Erase In Line)_: Erase (parts of) the current line. + +Other Control Sequences – such as moving the cursor – are not (yet) supported. + +An example library that uses `bramus/ansi-php` is [`bramus/monolog-colored-line-formatter`](https://github.com/bramus/monolog-colored-line-formatter). It uses `bramus/ansi-php`'s SGR support to colorize the output: + +![Monolog Colored Line Formatter](https://user-images.githubusercontent.com/11269635/28756233-c9f63abe-756a-11e7-883f-a084f35c55e7.gif) + +## Prerequisites/Requirements + +- PHP 5.4.0 or greater + +## Installation + +Installation is possible using Composer + +```shell +composer require bramus/ansi-php ~3.0 +``` + +## Usage + +The easiest way to use _ANSI PHP_ is to use the bundled `Ansi` helper class which provides easy shorthands to working with `bramus/ansi-php`. The `Ansi` class is written in such a way that you can chain calls to one another. + +If you're feeling adventurous, you're of course free to use the raw `ControlFunction` and `ControlSequence` classes. + +### Quick example + +```php +use \Bramus\Ansi\Ansi; +use \Bramus\Ansi\Writers\StreamWriter; +use \Bramus\Ansi\ControlSequences\EscapeSequences\Enums\SGR; + +// Create Ansi Instance +$ansi = new Ansi(new StreamWriter('php://stdout')); + +// Output some styled text on screen, along with a Line Feed and a Bell +$ansi->color(array(SGR::COLOR_FG_RED, SGR::COLOR_BG_WHITE)) + ->blink() + ->text('I will be blinking red on a white background.') + ->nostyle() + ->text(' And I will be normally styled.') + ->lf() + ->text('Ooh, a bell is coming ...') + ->bell(); +``` + +See more examples further down on how to use these. + +## Concepts + +Since v3.0 `bramus/ansi-php` uses the concept of writers to write the data to. By default a `StreamWriter` writing to `php://stdout` is used. + +The following writers are provided + +- `StreamWriter`: Writes the data to a stream. Just pass in the path to a file and it will open a stream for you. Defaults to writing to `php://stdout`. +- `BufferWriter`: Writes the data to a buffer. When calling `flush()` the contents of the buffer will be returned. +- `ProxyWriter`: Acts as a proxy to another writer. Writes the data to an internal buffer. When calling `flush()` the writer will first write the data to the other writer before returning it. + +## The `Ansi` helper class functions + +### Core functions: + +- `text($text)`: Write a piece of data to the writer +- `setWriter(\Bramus\Ansi\Writers\WriterInterface $writer)`: Sets the writer +- `getWriter()`: Gets the writer + +### ANSI Control Function shorthands: + +These shorthands write a Control Character to the writer. + +- `bell()`: Bell Control Character (`\a`) +- `backspace()`: Backspace Control Character (`\b`) +- `tab()`: Tab Control Character (`\t`) +- `lf()`: Line Feed Control Character (`\n`) +- `cr()`: Carriage Return Control Character (`\r`) +- `esc()`: Escape Control Character + +### SGR ANSI Escape Sequence shorthands: + +These shorthands write SGR ANSI Escape Sequences to the writer. + +- `nostyle()` or `reset()`: Remove all text styling (colors, bold, etc) +- `color()`: Set the foreground and/or backgroundcolor of the text. _(see further)_ +- `bold()` or `bright()`: Bold: On. On some systems "Intensity: Bright" +- `normal()`: Bold: Off. On some systems "Intensity: Normal" +- `faint()`: Intensity: Faint. _(Not widely supported)_ +- `italic()`: Italic: On. _(Not widely supported)_ +- `underline()`: Underline: On. +- `blink()`: Blink: On. +- `negative()`: Inverse or Reverse. Swap foreground and background. +- `strikethrough()`: Strikethrough: On. _(Not widely supported)_ + +__IMPORTANT:__ Select Graphic Rendition works in such a way that text styling you have set will remain active until you call `nostyle()` or `reset()` to return to the default styling. + +### ED ANSI Escape Sequence shorthands: + +These shorthands write ED ANSI Escape Sequences to the writer. + +- `eraseDisplay()`: Erase the entire screen and moves the cursor to home. +- `eraseDisplayUp()`: Erase the screen from the current line up to the top of the screen. +- `eraseDisplayDown()`: Erase the screen from the current line down to the bottom of the screen. + +### EL ANSI Escape Sequence shorthands: + +These shorthands write EL ANSI Escape Sequences to the writer. + +- `eraseLine()`: Erase the entire current line. +- `eraseLineToEOL()`: Erase from the current cursor position to the end of the current line. +- `eraseLineToSOL()`: Erases from the current cursor position to the start of the current line. + +### Extra functions + +- `flush()` or `get()`: Retrieve contents of a `FlushableWriter` writer. +- `e()`: Echo the contents of a `FlushableWriter` writer. + +## Examples + +### The Basics + +```php +// Create Ansi Instance +$ansi = new \Bramus\Ansi\Ansi(); + +// This will output a Bell +$ansi->bell(); + +// This will output some text +$ansi->text('Hello World!'); +``` + +_NOTE:_ As no `$writer` is passed into the constructor of `\Bramus\Ansi\Ansi`, the default `StreamWriter` writing to `php://stdout` is used. + +### Using a `FlushableWriter` + +Flushable Writers are writers that cache the data and only output it when flushed using its `flush()` function. The `BufferWriter` and `ProxyWriter` implement this interface. + +```php +// Create Ansi Instance +$ansi = new \Bramus\Ansi\Ansi(new \Bramus\Ansi\Writers\BufferWriter()); + +// This will append a bell to the buffer. It will not output it. +$ansi->bell(); + +// This will append a bell to the buffer. It will not output it. +$ansi->text('Hello World!'); + +// Now we'll output it +echo $ansi->get(); +``` + +### Chaining + +`bramus/ansi-php`'s wrapper `Ansi` class supports chaining. + +```php +// Create Ansi Instance +$ansi = new \Bramus\Ansi\Ansi(); + +// This will output a Line Feed, some text, a Bell, and a Line Feed +$ansi->lf()->text('hello')->bell()->lf(); + +``` + +### Styling Text: The Basics + +```php +$ansi = new \Bramus\Ansi\Ansi(); +$ansi->bold()->underline()->text('I will be bold and underlined')->lf(); +``` + +__IMPORTANT__ Select Graphic Rendition works in such a way that text styling you have set will remain active until you call `nostyle()` or `reset()` to return to the default styling. + + +```php +$ansi = new \Bramus\Ansi\Ansi(); + +$ansi->bold()->underline()->text('I will be bold and underlined')->lf(); +$ansi->text('I will also be bold because nostyle() has not been called yet')->lf(); +$ansi->nostyle()->blink()->text('I will be blinking')->nostyle()->lf(); +$ansi->text('I will be normal because nostyle() was called on the previous line'); + +``` + +### Styling Text: Colors + +Colors, and other text styling options, are defined as contants on `\Bramus\Ansi\ControlSequences\EscapeSequences\Enums\SGR`. + +#### Foreground (Text) Colors + +- `SGR::COLOR_FG_BLACK`: Black Foreground Color +- `SGR::COLOR_FG_RED`: Red Foreground Color +- `SGR::COLOR_FG_GREEN`: Green Foreground Color +- `SGR::COLOR_FG_YELLOW`: Yellow Foreground Color +- `SGR::COLOR_FG_BLUE`: Blue Foreground Color +- `SGR::COLOR_FG_PURPLE`: Purple Foreground Color +- `SGR::COLOR_FG_CYAN`: Cyan Foreground Color +- `SGR::COLOR_FG_WHITE`: White Foreground Color +- `SGR::COLOR_FG_BLACK_BRIGHT`: Black Foreground Color (Bright) +- `SGR::COLOR_FG_RED_BRIGHT`: Red Foreground Color (Bright) +- `SGR::COLOR_FG_GREEN_BRIGHT`: Green Foreground Color (Bright) +- `SGR::COLOR_FG_YELLOW_BRIGHT`: Yellow Foreground Color (Bright) +- `SGR::COLOR_FG_BLUE_BRIGHT`: Blue Foreground Color (Bright) +- `SGR::COLOR_FG_PURPLE_BRIGHT`: Purple Foreground Color (Bright) +- `SGR::COLOR_FG_CYAN_BRIGHT`: Cyan Foreground Color (Bright) +- `SGR::COLOR_FG_WHITE_BRIGHT`: White Foreground Color (Bright) +- `SGR::COLOR_FG_RESET`: Default Foreground Color + +#### Background Colors + +- `SGR::COLOR_BG_BLACK`: Black Background Color +- `SGR::COLOR_BG_RED`: Red Background Color +- `SGR::COLOR_BG_GREEN`: Green Background Color +- `SGR::COLOR_BG_YELLOW`: Yellow Background Color +- `SGR::COLOR_BG_BLUE`: Blue Background Color +- `SGR::COLOR_BG_PURPLE`: Purple Background Color +- `SGR::COLOR_BG_CYAN`: Cyan Background Color +- `SGR::COLOR_BG_WHITE`: White Background Color +- `SGR::COLOR_BG_BLACK_BRIGHT`: Black Background Color (Bright) +- `SGR::COLOR_BG_RED_BRIGHT`: Red Background Color (Bright) +- `SGR::COLOR_BG_GREEN_BRIGHT`: Green Background Color (Bright) +- `SGR::COLOR_BG_YELLOW_BRIGHT`: Yellow Background Color (Bright) +- `SGR::COLOR_BG_BLUE_BRIGHT`: Blue Background Color (Bright) +- `SGR::COLOR_BG_PURPLE_BRIGHT`: Purple Background Color (Bright) +- `SGR::COLOR_BG_CYAN_BRIGHT`: Cyan Background Color (Bright) +- `SGR::COLOR_BG_WHITE_BRIGHT`: White Background Color (Bright) +- `SGR::COLOR_BG_RESET`: Default Background Color + +Pass one of these into `$ansi->color()` and the color will be set. + +```php +use \Bramus\Ansi\ControlSequences\EscapeSequences\Enums\SGR; + +$ansi = new \Bramus\Ansi\Ansi(); + +$ansi->color(SGR::COLOR_FG_RED) + ->text('I will be red') + ->nostyle(); +``` + +To set the foreground and background color in one call, pass them using an array to `$ansi->color()` + +```php +use \Bramus\Ansi\ControlSequences\EscapeSequences\Enums\SGR; + +$ansi = new \Bramus\Ansi\Ansi(); + +$ansi->color(array(SGR::COLOR_FG_RED, SGR::COLOR_BG_WHITE)) + ->blink() + ->text('I will be blinking red on a wrhite background.') + ->nostyle(); +``` + +### Using the raw classes + +As all raw `ControlFunction` and `ControlSequence` classes are provided with a `__toString()` function it's perfectly possible to directly `echo` some `bramus/ansi-php` instance. + +```php +// Output a Bell Control Character +echo new \Bramus\Ansi\ControlFunctions\Bell(); + +// Output an ED instruction, to erase the entire screen +echo new \Bramus\Ansi\ControlSequences\EscapeSequences\ED( + \Bramus\Ansi\ControlSequences\EscapeSequences\Enums\ED::ALL +); +``` + +To fetch their contents, use the `get()` function: + +```php +// Get ANSI string for a Bell Control Character +$bell = (new \Bramus\Ansi\ControlFunctions\Bell())->get(); + +// Get ANSI string for an ED instruction, to erase the entire screen +$eraseDisplay = (new \Bramus\Ansi\ControlSequences\EscapeSequences\ED( + \Bramus\Ansi\ControlSequences\EscapeSequences\Enums\ED::ALL +))->get(); + +echo $bell . $bell . $eraseDisplay . $bell; +``` + +## Unit Testing + +`bramus/ansi-php` ships with unit tests using [PHPUnit](https://github.com/sebastianbergmann/phpunit/). + +- If PHPUnit is installed globally run `phpunit` to run the tests. + +- If PHPUnit is not installed globally, install it locally throuh composer by running `composer install --dev`. Run the tests themselves by calling `vendor/bin/phpunit` or `composer test` + +Unit tests are also automatically run [on Travis CI](http://travis-ci.org/bramus/ansi-php) + +## License + +`bramus/ansi-php` is released under the MIT public license. See the enclosed `LICENSE` for details. + +## ANSI References + +- [http://en.wikipedia.org/wiki/ANSI_escape_code](http://en.wikipedia.org/wiki/ANSI_escape_code) +- [http://www.ecma-international.org/publications/files/ECMA-ST/Ecma-048.pdf](http://www.ecma-international.org/publications/files/ECMA-ST/Ecma-048.pdf) +- [http://wiki.bash-hackers.org/scripting/terminalcodes](http://wiki.bash-hackers.org/scripting/terminalcodes) +- [http://web.mit.edu/gnu/doc/html/screen_10.html](http://web.mit.edu/gnu/doc/html/screen_10.html) +- [http://www.isthe.com/chongo/tech/comp/ansi_escapes.html](http://www.isthe.com/chongo/tech/comp/ansi_escapes.html) +- [http://www.termsys.demon.co.uk/vtansi.htm](http://www.termsys.demon.co.uk/vtansi.htm) +- [http://rrbrandt.dee.ufcg.edu.br/en/docs/ansi/](http://rrbrandt.dee.ufcg.edu.br/en/docs/ansi/) +- [http://tldp.org/HOWTO/Bash-Prompt-HOWTO/c327.html](http://tldp.org/HOWTO/Bash-Prompt-HOWTO/c327.html) diff --git a/vendor/bramus/ansi-php/src/Ansi.php b/vendor/bramus/ansi-php/src/Ansi.php new file mode 100644 index 00000000..0c8f0b6d --- /dev/null +++ b/vendor/bramus/ansi-php/src/Ansi.php @@ -0,0 +1,111 @@ +setWriter($writer); + } + + /** + * Sets the writer + * @param Writer\WriterInterface $writer The writer to use + */ + public function setWriter(Writers\WriterInterface $writer) + { + $this->writer = $writer; + } + + /** + * Gets the writer + * @return Writer\WriterInterface $writer The writer used + */ + public function getWriter() + { + return $this->writer; + } + + /** + * Write a piece of text onto the writer + * @param string $text The text to write + * @return Ansi self, for chaining + */ + public function text($text) + { + // Write the text to the writer + $this->writer->write($text); + + // Afford chaining + return $this; + } + + /** + * Flush the contents of the writer + * @param $resetAfterwards Reset the writer contents after flushing? + * @return string The writer contents + */ + public function flush($resetAfterwards = true) + { + if ($this->writer instanceof Writers\FlushableInterface) { + return $this->writer->flush($resetAfterwards); + } else { + throw new \Exception('Flushing a non FlushableInterface is not possible'); + } + } + + public function get($resetAfterwards = true) + { + try { + return $this->flush($resetAfterwards); + } catch (\Exception $e) { + throw $e; + } + } + + /** + * Echo the contents of the writer + * @param $resetAfterwards Reset the writer contents after flushing? + * @return Ansi self, for chaining + */ + public function e($resetAfterwards = true) + { + try { + // Get the contents and echo them + echo $this->flush($resetAfterwards); + + // Afford chaining + return $this; + } catch (\Exception $e) { + throw $e; + } + } +} diff --git a/vendor/bramus/ansi-php/src/ControlFunctions/Backspace.php b/vendor/bramus/ansi-php/src/ControlFunctions/Backspace.php new file mode 100644 index 00000000..924319bf --- /dev/null +++ b/vendor/bramus/ansi-php/src/ControlFunctions/Backspace.php @@ -0,0 +1,13 @@ +setControlCharacter($controlCharacter); + } + + /** + * Set the control character + * @param string $controlCharacter The Control Character + */ + public function setControlCharacter($controlCharacter) + { + // @TODO: Check Validity + $this->controlCharacter = $controlCharacter; + + return $this; + } + + /** + * Build and return the ANSI Code + * @return string The ANSI Code + */ + public function get() + { + return $this->controlCharacter; + } + + /** + * Return the ANSI Code upon __toString + * @return string The ANSI Code + */ + public function __toString() + { + return $this->get(); + } + + /** + * Echo the ANSI Code + */ + public function e() + { + echo $this->get(); + + return $this; + } +} + +// EOF diff --git a/vendor/bramus/ansi-php/src/ControlFunctions/Bell.php b/vendor/bramus/ansi-php/src/ControlFunctions/Bell.php new file mode 100644 index 00000000..93754e32 --- /dev/null +++ b/vendor/bramus/ansi-php/src/ControlFunctions/Bell.php @@ -0,0 +1,13 @@ +setControlSequenceIntroducer($controlSequenceIntroducer); + } + + /** + * Set the control sequence introducer + * @param \Bramus\Ansi\ControlFunction $controlSequenceIntroducer A ControlFunction that acts as the Control Sequence Introducer (CSI) + * @return ControlSequence self, for chaining + */ + public function setControlSequenceIntroducer($controlSequenceIntroducer) + { + // Make sure it's a ControlFunction instance + if (is_string($controlSequenceIntroducer)) { + $controlSequenceIntroducer = new ControlFunction($controlSequenceIntroducer); + } + + // @TODO: Check Validity + $this->controlSequenceIntroducer = $controlSequenceIntroducer; + + return $this; + } + + /** + * Gets the CSI + * @return string The CSI + */ + public function getControlSequenceIntroducer() + { + return $this->controlSequenceIntroducer; + } + + /** + * Build and return the ANSI Code + * @return string The ANSI Code + */ + public function get() + { + $toReturn = ''; + + // Append CSI + $toReturn = $this->controlSequenceIntroducer->get().'['; + + // Append Parameter Byte (if any) + if (isset($this->parameterBytes) && sizeof((array) $this->parameterBytes) > 0) { + $toReturn .= implode(';', $this->parameterBytes); + } + + // Append Intermediate Bytes (if any) + if (isset($this->intermediateBytes) && sizeof((array) $this->intermediateBytes) > 0) { + $toReturn .= implode(';', $this->intermediateBytes); // @TODO: Verify that ';' is the glue for intermediate bytes + } + + // Append Final Byte (if any) + if (isset($this->finalByte)) { + $toReturn .= $this->getFinalByte(); + } + + return $toReturn; + } + + /** + * Return the ANSI Code upon __toString + * @return string The ANSI Code + */ + public function __toString() + { + return $this->get(); + } + + /** + * Echo the ANSI Code + */ + public function e() + { + echo $this->get(); + } +} + +// EOF diff --git a/vendor/bramus/ansi-php/src/ControlSequences/EscapeSequences/Base.php b/vendor/bramus/ansi-php/src/ControlSequences/EscapeSequences/Base.php new file mode 100644 index 00000000..1b7653ca --- /dev/null +++ b/vendor/bramus/ansi-php/src/ControlSequences/EscapeSequences/Base.php @@ -0,0 +1,30 @@ +setFinalByte($finalByte); + + // Call Parent Constructor + parent::__construct( + new \Bramus\Ansi\ControlFunctions\Escape() + ); + } +} diff --git a/vendor/bramus/ansi-php/src/ControlSequences/EscapeSequences/ED.php b/vendor/bramus/ansi-php/src/ControlSequences/EscapeSequences/ED.php new file mode 100644 index 00000000..d6a8a6cb --- /dev/null +++ b/vendor/bramus/ansi-php/src/ControlSequences/EscapeSequences/ED.php @@ -0,0 +1,31 @@ +setParameterBytes($parameterBytes); + + // Call Parent Constructor (which will store finalByte) + parent::__construct( + \Bramus\Ansi\ControlSequences\EscapeSequences\Enums\FinalByte::ED + ); + } +} diff --git a/vendor/bramus/ansi-php/src/ControlSequences/EscapeSequences/EL.php b/vendor/bramus/ansi-php/src/ControlSequences/EscapeSequences/EL.php new file mode 100644 index 00000000..66d2c8aa --- /dev/null +++ b/vendor/bramus/ansi-php/src/ControlSequences/EscapeSequences/EL.php @@ -0,0 +1,31 @@ +setParameterBytes($parameterBytes); + + // Call Parent Constructor (which will store finalByte) + parent::__construct( + \Bramus\Ansi\ControlSequences\EscapeSequences\Enums\FinalByte::EL + ); + } +} diff --git a/vendor/bramus/ansi-php/src/ControlSequences/EscapeSequences/Enums/ED.php b/vendor/bramus/ansi-php/src/ControlSequences/EscapeSequences/Enums/ED.php new file mode 100644 index 00000000..27a64f07 --- /dev/null +++ b/vendor/bramus/ansi-php/src/ControlSequences/EscapeSequences/Enums/ED.php @@ -0,0 +1,26 @@ +setParameterBytes($parameterBytes); + + // Call Parent Constructor (which will store finalByte) + parent::__construct( + \Bramus\Ansi\ControlSequences\EscapeSequences\Enums\FinalByte::SGR + ); + } +} diff --git a/vendor/bramus/ansi-php/src/ControlSequences/Traits/HasFinalByte.php b/vendor/bramus/ansi-php/src/ControlSequences/Traits/HasFinalByte.php new file mode 100644 index 00000000..d1a05584 --- /dev/null +++ b/vendor/bramus/ansi-php/src/ControlSequences/Traits/HasFinalByte.php @@ -0,0 +1,34 @@ +finalByte = $finalByte; + + return $this; + } + + /** + * Get the Final Byte + * @return string + */ + public function getFinalByte() + { + return $this->finalByte; + } +} diff --git a/vendor/bramus/ansi-php/src/ControlSequences/Traits/HasIntermediateBytes.php b/vendor/bramus/ansi-php/src/ControlSequences/Traits/HasIntermediateBytes.php new file mode 100644 index 00000000..07e9cce4 --- /dev/null +++ b/vendor/bramus/ansi-php/src/ControlSequences/Traits/HasIntermediateBytes.php @@ -0,0 +1,52 @@ +intermediateBytes[] = (string) $intermediateByte; + + return $this; + } + + /** + * Set the Intermediate Byte + * @param array $parameterByte The byte to add + * @return Base self, for chaining + */ + public function setIntermediateBytes($intermediateBytes) + { + foreach ((array) $intermediateBytes as $byte) { + $this->addIntermediateByte($byte); + } + + return $this; + } + + /** + * Get the Intermediate Byte + * @param bool $asString As a string, or as an array? + * @return Base self, for chaining + */ + public function getIntermediateBytes($asString = true) + { + if ($asString === true) { + return implode($this->intermediateBytes); + } else { + return $this->intermediateBytes; + } + } +} diff --git a/vendor/bramus/ansi-php/src/ControlSequences/Traits/HasParameterBytes.php b/vendor/bramus/ansi-php/src/ControlSequences/Traits/HasParameterBytes.php new file mode 100644 index 00000000..f6dbc9dc --- /dev/null +++ b/vendor/bramus/ansi-php/src/ControlSequences/Traits/HasParameterBytes.php @@ -0,0 +1,52 @@ +parameterBytes[] = (string) $parameterByte; + + return $this; + } + + /** + * Set the Parameter Byte + * @param array $parameterByte The byte to add + * @return Base self, for chaining + */ + public function setParameterBytes($parameterBytes) + { + foreach ((array) $parameterBytes as $byte) { + $this->addParameterByte($byte); + } + + return $this; + } + + /** + * Get the Parameter Byte + * @param bool $asString As a string, or as an array? + * @return Base self, for chaining + */ + public function getParameterBytes($asString = true) + { + if ($asString === true) { + return implode($this->parameterBytes); + } else { + return $this->parameterBytes; + } + } +} diff --git a/vendor/bramus/ansi-php/src/Traits/ControlFunctions.php b/vendor/bramus/ansi-php/src/Traits/ControlFunctions.php new file mode 100644 index 00000000..b957adb5 --- /dev/null +++ b/vendor/bramus/ansi-php/src/Traits/ControlFunctions.php @@ -0,0 +1,74 @@ +writer->write(new \Bramus\Ansi\ControlFunctions\Bell()); + + // Afford chaining + return $this; + } + + /** + * Add a Backspace Control Character to the buffer / echo it on screen + * @return Ansi self, for chaining + */ + public function backspace() + { + // Write character onto writer + $this->writer->write(new \Bramus\Ansi\ControlFunctions\Backspace()); + + // Afford chaining + return $this; + } + + /** + * Add a Tab Control Character to the buffer / echo it on screen + * @return Ansi self, for chaining + */ + public function tab() + { + // Write character onto writer + $this->writer->write(new \Bramus\Ansi\ControlFunctions\Tab()); + + // Afford chaining + return $this; + } + + /** + * Add a Line Feed Control Character to the buffer / echo it on screen + * @return Ansi self, for chaining + */ + public function lf() + { + // Write character onto writer + $this->writer->write(new \Bramus\Ansi\ControlFunctions\LineFeed()); + + // Afford chaining + return $this; + } + + /** + * Add a Carriage Return Control Character to the buffer / echo it on screen + * @return Ansi self, for chaining + */ + public function cr() + { + // Write character onto writer + $this->writer->write(new \Bramus\Ansi\ControlFunctions\CarriageReturn()); + + // Afford chaining + return $this; + } +} diff --git a/vendor/bramus/ansi-php/src/Traits/EscapeSequences/ED.php b/vendor/bramus/ansi-php/src/Traits/EscapeSequences/ED.php new file mode 100644 index 00000000..087316d0 --- /dev/null +++ b/vendor/bramus/ansi-php/src/Traits/EscapeSequences/ED.php @@ -0,0 +1,54 @@ +writer->write( + new \Bramus\Ansi\ControlSequences\EscapeSequences\ED($data) + ); + + // Afford chaining + return $this; + } + + /** + * Erase the screen from the current line up to the top of the screen + * @return Ansi self, for chaining + */ + public function eraseDisplayUp() + { + return $this->ed(EnumED::UP); + } + + /** + * Erase the screen from the current line down to the bottom of the screen + * @return Ansi self, for chaining + */ + public function eraseDisplayDown() + { + return $this->ed(EnumED::DOWN); + } + + /** + * Erase the entire screen and moves the cursor to home + * @return Ansi self, for chaining + */ + public function eraseDisplay() + { + return $this->ed(EnumED::ALL); + } +} diff --git a/vendor/bramus/ansi-php/src/Traits/EscapeSequences/EL.php b/vendor/bramus/ansi-php/src/Traits/EscapeSequences/EL.php new file mode 100644 index 00000000..435ce500 --- /dev/null +++ b/vendor/bramus/ansi-php/src/Traits/EscapeSequences/EL.php @@ -0,0 +1,57 @@ +writer->write( + new \Bramus\Ansi\ControlSequences\EscapeSequences\EL($data) + ); + + // Afford chaining + return $this; + } + + /** + * Erase from the current cursor position to the end of the current line. + * @param boolean $outputNow Echo the character right now, or add it to the buffer building? + * @return Ansi self, for chaining + */ + public function eraseLineToEOL() + { + return $this->el(EnumEL::TO_EOL); + } + + /** + * Erases from the current cursor position to the start of the current line. + * @param boolean $outputNow Echo the character right now, or add it to the buffer building? + * @return Ansi self, for chaining + */ + public function eraseLineToSOL() + { + return $this->el(EnumEL::TO_SOL); + } + + /** + * Erase the entire current line. + * @param boolean $outputNow Echo the character right now, or add it to the buffer building? + * @return Ansi self, for chaining + */ + public function eraseLine() + { + return $this->el(EnumEL::ALL); + } +} diff --git a/vendor/bramus/ansi-php/src/Traits/EscapeSequences/SGR.php b/vendor/bramus/ansi-php/src/Traits/EscapeSequences/SGR.php new file mode 100644 index 00000000..fa5f9ff0 --- /dev/null +++ b/vendor/bramus/ansi-php/src/Traits/EscapeSequences/SGR.php @@ -0,0 +1,136 @@ +writer->write( + new \Bramus\Ansi\ControlSequences\EscapeSequences\SGR($data) + ); + + // Afford chaining + return $this; + } + + /** + * Shorthand to remove all text styling (colors, bold, etc) + * @return Ansi self, for chaining + */ + public function nostyle() + { + return $this->sgr(array(EnumSGR::STYLE_NONE)); + } + + /** + * Shorthand to remove all text styling (colors, bold, etc) + * @return Ansi self, for chaining + */ + public function reset() + { + return $this->nostyle(); + } + + /** + * Shorthand to set the color. + * @param array $color The color you want to set. Use an array filled with ControlSequences\EscapeSequences\Enums\SGR::COLOR_* constants + * @return Ansi self, for chaining + */ + public function color($color = array()) + { + return $this->sgr($color); + } + + /** + * Shorthand to set make text styling to bold (on some systems bright intensity) + * @return Ansi self, for chaining + */ + public function bold() + { + return $this->sgr(array(EnumSGR::STYLE_BOLD)); + } + + /** + * Shorthand to set the text intensity to bright (on some systems bold) + * @return Ansi self, for chaining + */ + public function bright() + { + return $this->sgr(array(EnumSGR::STYLE_INTENSITY_BRIGHT)); + } + + /** + * Shorthand to set the text styling to normal (no bold/bright) + * @return Ansi self, for chaining + */ + public function normal() + { + return $this->sgr(array(EnumSGR::STYLE_INTENSITY_NORMAL)); + } + + /** + * (Not widely supported) Shorthand to set the text intensity to faint + * @return Ansi self, for chaining + */ + public function faint() + { + return $this->sgr(array(EnumSGR::STYLE_INTENSITY_FAINT)); + } + + /** + * (Not widely supported) Shorthand to set the text styling to italic + * @return Ansi self, for chaining + */ + public function italic() + { + return $this->sgr(array(EnumSGR::STYLE_ITALIC)); + } + + /** + * Shorthand to set the text styling to underline + * @return Ansi self, for chaining + */ + public function underline() + { + return $this->sgr(array(EnumSGR::STYLE_UNDERLINE)); + } + + /** + * Shorthand to set the text styling to blink + * @return Ansi self, for chaining + */ + public function blink() + { + return $this->sgr(array(EnumSGR::STYLE_BLINK)); + } + + /** + * Shorthand to set the text styling to reserved (viz. swap background & foreground color) + * @return Ansi self, for chaining + */ + public function negative() + { + return $this->sgr(array(EnumSGR::STYLE_NEGATIVE)); + } + + /** + * (Not widely supported) Shorthand to set the text styling to strikethrough + * @return Ansi self, for chaining + */ + public function strikethrough() + { + return $this->sgr(array(EnumSGR::STYLE_STRIKETHROUGH)); + } +} diff --git a/vendor/bramus/ansi-php/src/Writers/BufferWriter.php b/vendor/bramus/ansi-php/src/Writers/BufferWriter.php new file mode 100644 index 00000000..3e4d9eb8 --- /dev/null +++ b/vendor/bramus/ansi-php/src/Writers/BufferWriter.php @@ -0,0 +1,61 @@ +buffer .= $data; + + // Afford chaining + return $this; + } + + /** + * Get/Flush the data + * @param boolean $resetAfterwards Reset the data afterwards? + * @return string The data + */ + public function flush($resetAfterwards = true) + { + // Get buffer contents + $buffer = $this->buffer; + + // Clear buffer contents + if ($resetAfterwards) { + $this->clear(); + } + + // Return data that was flushed + return $buffer; + } + + /** + * Reset/Clear the buffer + * @return BufferedStreamWriter self, for chaining + */ + public function clear() + { + // Clear the buffer + $this->buffer = ''; + + // Afford chaining + return $this; + } +} diff --git a/vendor/bramus/ansi-php/src/Writers/FlushableInterface.php b/vendor/bramus/ansi-php/src/Writers/FlushableInterface.php new file mode 100644 index 00000000..9a115f5e --- /dev/null +++ b/vendor/bramus/ansi-php/src/Writers/FlushableInterface.php @@ -0,0 +1,19 @@ +setWriter($writer); + } + + /** + * Set the writer to proxy for + * @param WriterInterface $writer The writer to proxy for + */ + public function setWriter(WriterInterface $writer) + { + $this->writer = $writer; + } + + /** + * Get the writer we are proxying for + * @return WriterInterface The writer we are proxying for + */ + public function getWriter() + { + return $this->writer; + } + + /** + * Get/Flush the data + * @param boolean $resetAfterwards Reset the data afterwards? + * @return string The data + */ + public function flush($resetAfterwards = true) + { + // Get the data from the buffer + $data = parent::flush($resetAfterwards); + + // Write the data to the writer we are proxying for + $this->writer->write($data); + + // Return the data + return $data; + } +} diff --git a/vendor/bramus/ansi-php/src/Writers/StreamWriter.php b/vendor/bramus/ansi-php/src/Writers/StreamWriter.php new file mode 100644 index 00000000..a833f59a --- /dev/null +++ b/vendor/bramus/ansi-php/src/Writers/StreamWriter.php @@ -0,0 +1,78 @@ +setStream($stream); + } + + /** + * Destructor + */ + public function __destruct() + { + @fclose($this->stream); + } + + /** + * Set the stream to write to + * @param mixed $stream Stream to write to + */ + public function setStream($stream = null) + { + // String passed in? Try converting it to a stream + if (is_string($stream)) { + $stream = @fopen($stream, 'a'); + } + + // Make sure the stream is a resource + if (!is_resource($stream)) { + throw new \InvalidArgumentException('Invalid Stream'); + } + + // Store it + $this->stream = $stream; + + // Afford chaining + return $this; + } + + /** + * Get stream we are writing to + * @return resource Stream we are writing to + */ + public function getStream() + { + return $this->stream; + } + + /** + * Write Data + * @param string $data Data to write + * @return WriterInterface Self, for chaining + */ + public function write($data) + { + // Write data on the stream + fwrite($this->stream, $data); + + // Afford chaining + return $this; + } +} diff --git a/vendor/bramus/ansi-php/src/Writers/WriterInterface.php b/vendor/bramus/ansi-php/src/Writers/WriterInterface.php new file mode 100644 index 00000000..a6c59fed --- /dev/null +++ b/vendor/bramus/ansi-php/src/Writers/WriterInterface.php @@ -0,0 +1,16 @@ +assertInstanceOf('\Bramus\Ansi\Ansi', $a); + $this->assertInstanceOf('\Bramus\Ansi\Writers\StreamWriter', $a->getWriter()); + + // Create Ansi Instance (using custom writer) + $a = new Ansi(new BufferWriter()); + $this->assertInstanceOf('\Bramus\Ansi\Ansi', $a); + $this->assertInstanceOf('\Bramus\Ansi\Writers\BufferWriter', $a->getWriter()); + + } + + public function testFunctions() + { + + } + + public function testChaining() + { + $a = new Ansi(new BufferWriter()); + $test = $a->text('foo')->text('bar')->get(); + + $this->assertEquals( + $test, + 'foobar' + ); + } + +} \ No newline at end of file diff --git a/vendor/bramus/ansi-php/tests/ControlFunctionsTest.php b/vendor/bramus/ansi-php/tests/ControlFunctionsTest.php new file mode 100644 index 00000000..3219c001 --- /dev/null +++ b/vendor/bramus/ansi-php/tests/ControlFunctionsTest.php @@ -0,0 +1,71 @@ +assertEquals((new \Bramus\Ansi\ControlFunctions\Base(C0::BS))->get(), C0::BS); + + // Helper Classes + $this->assertEquals((new \Bramus\Ansi\ControlFunctions\Backspace())->get(), C0::BS); + $this->assertEquals((new \Bramus\Ansi\ControlFunctions\Backspace())->get(), C0::BACKSPACE); + $this->assertEquals((new \Bramus\Ansi\ControlFunctions\Bell())->get(), C0::BEL); + $this->assertEquals((new \Bramus\Ansi\ControlFunctions\Bell())->get(), C0::BELL); + $this->assertEquals((new \Bramus\Ansi\ControlFunctions\CarriageReturn())->get(), C0::CR); + $this->assertEquals((new \Bramus\Ansi\ControlFunctions\Escape())->get(), C0::ESC); + $this->assertEquals((new \Bramus\Ansi\ControlFunctions\LineFeed())->get(), C0::LF); + $this->assertEquals((new \Bramus\Ansi\ControlFunctions\Tab())->get(), C0::TAB); + } + + public function testUsingToString() + { + // Base + $this->assertEquals(new \Bramus\Ansi\ControlFunctions\Base(C0::BS), C0::BS); + + // Helper Classes + $this->assertEquals(new \Bramus\Ansi\ControlFunctions\Backspace(), C0::BS); + $this->assertEquals(new \Bramus\Ansi\ControlFunctions\Backspace(), C0::BACKSPACE); + $this->assertEquals(new \Bramus\Ansi\ControlFunctions\Bell(), C0::BEL); + $this->assertEquals(new \Bramus\Ansi\ControlFunctions\Bell(), C0::BELL); + $this->assertEquals(new \Bramus\Ansi\ControlFunctions\CarriageReturn(), C0::CR); + $this->assertEquals(new \Bramus\Ansi\ControlFunctions\Escape(), C0::ESC); + $this->assertEquals(new \Bramus\Ansi\ControlFunctions\LineFeed(), C0::LF); + $this->assertEquals(new \Bramus\Ansi\ControlFunctions\Tab(), C0::TAB); + } + + public function testAnsiShorthands() + { + $a = new Ansi(new BufferWriter()); + + $this->assertEquals($a->backspace()->flush(), C0::BS); + $this->assertEquals($a->backspace()->flush(), C0::BACKSPACE); + $this->assertEquals($a->bell()->flush(), C0::BEL); + $this->assertEquals($a->bell()->flush(), C0::BELL); + $this->assertEquals($a->cr()->flush(), C0::CR); + $this->assertEquals($a->lf()->flush(), C0::LF); + $this->assertEquals($a->tab()->flush(), C0::TAB); + } + + public function testAnsiShorthandsChaining() + { + $a = new Ansi(new BufferWriter()); + + // @note: we are going a round trip (bell is tested twice) + // to make sure the test before it is also working correctly + $this->assertEquals( + $a->bell()->backspace()->cr()->lf()->tab()->bell()->get(), + C0::BELL.C0::BS.C0::CR.C0::LF.C0::TAB.C0::BEL + ); + } +} + +// EOF diff --git a/vendor/bramus/ansi-php/tests/EscapeSequenceEDTest.php b/vendor/bramus/ansi-php/tests/EscapeSequenceEDTest.php new file mode 100644 index 00000000..ed77c8f3 --- /dev/null +++ b/vendor/bramus/ansi-php/tests/EscapeSequenceEDTest.php @@ -0,0 +1,96 @@ +assertInstanceOf('\Bramus\Ansi\ControlSequences\EscapeSequences\ED', $es); + + // Final byte must be ED + $this->assertEquals( + $es->getFinalByte(), + FinalByte::ED + ); + + // Parameter Byte must be ED::ALL + $this->assertEquals( + $es->getParameterBytes(), + ED::ALL + ); + } + + public function testEDRaw() + { + // ED::ALL + $this->assertEquals( + new EscapeSequenceED(ED::ALL), + C0::ESC.'['.ED::ALL.FinalByte::ED + ); + + // ED::UP + $this->assertEquals( + new EscapeSequenceED(ED::UP), + C0::ESC.'['.ED::UP.FinalByte::ED + ); + + // ED::DOWN + $this->assertEquals( + new EscapeSequenceED(ED::DOWN), + C0::ESC.'['.ED::DOWN.FinalByte::ED + ); + } + + public function testAnsiEDShorthandsSingle() + { + $a = new Ansi(new \Bramus\Ansi\Writers\BufferWriter()); + + $this->assertEquals( + $a->eraseDisplayUp()->get(), + new EscapeSequenceED(ED::UP) + ); + + $this->assertEquals( + $a->eraseDisplayDown()->get(), + new EscapeSequenceED(ED::DOWN) + ); + + $this->assertEquals( + $a->eraseDisplay()->get(), + new EscapeSequenceED(ED::ALL) + ); + } + + public function testAnsiEDShorthandChained() + { + $a = new Ansi(new \Bramus\Ansi\Writers\BufferWriter()); + $es = new EscapeSequenceED(ED::ALL); + + $this->assertEquals( + $a->ed(ED::ALL)->text('test')->get(), + $es.'test' + ); + } + + public function testAnsiEDShorthandsChained() + { + + $a = new Ansi(new \Bramus\Ansi\Writers\BufferWriter()); + + $this->assertEquals( + $a->eraseDisplayUp()->eraseDisplayDown()->eraseDisplay()->text('test')->get(), + (new EscapeSequenceED(ED::UP)).(new EscapeSequenceED(ED::DOWN)).(new EscapeSequenceED(ED::ALL)).'test' + ); + } +} + +// EOF diff --git a/vendor/bramus/ansi-php/tests/EscapeSequenceELTest.php b/vendor/bramus/ansi-php/tests/EscapeSequenceELTest.php new file mode 100644 index 00000000..e9d53b9c --- /dev/null +++ b/vendor/bramus/ansi-php/tests/EscapeSequenceELTest.php @@ -0,0 +1,96 @@ +assertInstanceOf('\Bramus\Ansi\ControlSequences\EscapeSequences\EL', $es); + + // Final byte must be EL + $this->assertEquals( + $es->getFinalByte(), + FinalByte::EL + ); + + // Parameter Byte must be EL::ALL + $this->assertEquals( + $es->getParameterBytes(), + EL::ALL + ); + } + + public function testELRaw() + { + // EL::ALL + $this->assertEquals( + new EscapeSequenceEL(EL::ALL), + C0::ESC.'['.EL::ALL.FinalByte::EL + ); + + // EL::TO_EOL + $this->assertEquals( + new EscapeSequenceEL(EL::TO_EOL), + C0::ESC.'['.EL::TO_EOL.FinalByte::EL + ); + + // EL::TO_SOL + $this->assertEquals( + new EscapeSequenceEL(EL::TO_SOL), + C0::ESC.'['.EL::TO_SOL.FinalByte::EL + ); + } + + public function testAnsiELShorthandsSingle() + { + $a = new Ansi(new \Bramus\Ansi\Writers\BufferWriter()); + + $this->assertEquals( + $a->eraseLine()->get(), + new EscapeSequenceEL(EL::ALL) + ); + + $this->assertEquals( + $a->eraseLineToEol()->get(), + new EscapeSequenceEL(EL::TO_EOL) + ); + + $this->assertEquals( + $a->eraseLineToSol()->get(), + new EscapeSequenceEL(EL::TO_SOL) + ); + } + + public function testAnsiELShorthandChained() + { + $a = new Ansi(new \Bramus\Ansi\Writers\BufferWriter()); + $es = new EscapeSequenceEL(EL::ALL); + + $this->assertEquals( + $a->el(EL::ALL)->text('test')->get(), + $es.'test' + ); + } + + public function testAnsiELShorthandsChained() + { + + $a = new Ansi(new \Bramus\Ansi\Writers\BufferWriter()); + + $this->assertEquals( + $a->eraseLine()->eraseLineToEol()->eraseLineToSol()->text('test')->get(), + (new EscapeSequenceEL(EL::ALL)).(new EscapeSequenceEL(EL::TO_EOL)).(new EscapeSequenceEL(EL::TO_SOL)).'test' + ); + } +} + +// EOF diff --git a/vendor/bramus/ansi-php/tests/EscapeSequenceSGRTest.php b/vendor/bramus/ansi-php/tests/EscapeSequenceSGRTest.php new file mode 100644 index 00000000..e7244036 --- /dev/null +++ b/vendor/bramus/ansi-php/tests/EscapeSequenceSGRTest.php @@ -0,0 +1,85 @@ +assertInstanceOf('\Bramus\Ansi\ControlSequences\EscapeSequences\SGR', $es); + + // Final byte must be SGR + $this->assertEquals( + $es->getFinalByte(), + FinalByte::SGR + ); + + // Parameter Byte must be SGR::STYLE_NONE + $this->assertEquals( + $es->getParameterBytes(), + SGR::STYLE_NONE + ); + } + + public function testSgrRaw() + { + // One Parameter + $this->assertEquals( + new EscapeSequenceSGR(SGR::STYLE_NONE), + C0::ESC.'['.SGR::STYLE_NONE.FinalByte::SGR + ); + + // Multiple Parameters + $this->assertEquals( + new EscapeSequenceSGR(array(SGR::STYLE_NONE, SGR::STYLE_BOLD)), + C0::ESC.'['.SGR::STYLE_NONE.';'.SGR::STYLE_BOLD.FinalByte::SGR + ); + } + + public function testAnsiSgrShorthandsSingle() + { + $a = new Ansi(new \Bramus\Ansi\Writers\BufferWriter()); + + $this->assertEquals( + $a->sgr(SGR::COLOR_FG_RED)->get(), + new EscapeSequenceSGR(SGR::COLOR_FG_RED) + ); + + $this->assertEquals( + $a->sgr()->get(), + new EscapeSequenceSGR(SGR::STYLE_NONE) + ); + } + + public function testAnsiSgrShorthandChained() + { + + $a = new Ansi(new \Bramus\Ansi\Writers\BufferWriter()); + + $this->assertEquals( + $a->sgr(SGR::COLOR_FG_RED)->text('test')->get(), + (new EscapeSequenceSGR(SGR::COLOR_FG_RED)).'test' + ); + } + + public function testAnsiSgrShorthandsChained() + { + + $a = new Ansi(new \Bramus\Ansi\Writers\BufferWriter()); + + $this->assertEquals( + $a->bold()->underline()->color(SGR::COLOR_FG_RED)->underline()->blink()->text('test')->reset()->get(), + (new EscapeSequenceSGR(SGR::STYLE_BOLD)).(new EscapeSequenceSGR(SGR::STYLE_UNDERLINE)).(new EscapeSequenceSGR(SGR::COLOR_FG_RED)).(new EscapeSequenceSGR(SGR::STYLE_UNDERLINE)).(new EscapeSequenceSGR(SGR::STYLE_BLINK)).'test'.(new EscapeSequenceSGR(SGR::STYLE_NONE)) + ); + } +} + +// EOF diff --git a/vendor/bramus/ansi-php/tests/EscapeSequenceTest.php b/vendor/bramus/ansi-php/tests/EscapeSequenceTest.php new file mode 100644 index 00000000..99eefd19 --- /dev/null +++ b/vendor/bramus/ansi-php/tests/EscapeSequenceTest.php @@ -0,0 +1,50 @@ +assertInstanceOf('\Bramus\Ansi\ControlSequences\EscapeSequences\Base', $es); + + // EscapeSequences MUST start with an Escape Control Function + $this->assertInstanceOf('\Bramus\Ansi\ControlFunctions\Escape', $es->getControlSequenceIntroducer()); + + // The finalByte passed in was ED + $this->assertEquals( + $es->getFinalByte(), + FinalByte::ED + ); + } + + public function testFinalByte() + { + $es = new EscapeSequence(FinalByte::ED); + + // Set new final byte + $es->setFinalByte(FinalByte::EL); + + // Check for new Final Byte + $this->assertEquals( + $es->getFinalByte(), + FinalByte::EL + ); + + $this->assertEquals( + $es->get(), + C0::ESC . '[' . FinalByte::EL + ); + + } + +} + +// EOF diff --git a/vendor/bramus/ansi-php/tests/EscapeSequenceWithParameterBytesTest.php b/vendor/bramus/ansi-php/tests/EscapeSequenceWithParameterBytesTest.php new file mode 100644 index 00000000..f27494a4 --- /dev/null +++ b/vendor/bramus/ansi-php/tests/EscapeSequenceWithParameterBytesTest.php @@ -0,0 +1,60 @@ +assertEquals( + $es->getParameterBytes(), + 0 + ); + + $this->assertEquals( + $es->get(), + C0::ESC . '[' . 0 . FinalByte::SGR + ); + } + + public function testParameterBytesSingleAdd() + { + $es = new EscapeSequenceSGR(0); + + // Add a parameter byte + $es->addParameterByte(1); + + $this->assertEquals( + $es->getParameterBytes(), + '01' + ); + + $this->assertEquals( + $es->get(), + C0::ESC . '[' . '0;1' . FinalByte::SGR + ); + + } + + public function testParameterBytesArray() + { + $es = new EscapeSequenceSGR(array(0, 1)); + + // Check for new Final Byte + $this->assertEquals( + $es->getParameterBytes(), + '01' + ); + + $this->assertEquals( + $es->get(), + C0::ESC . '[' . '0;1' . FinalByte::SGR + ); + + } +} diff --git a/vendor/bramus/ansi-php/tests/WritersTest.php b/vendor/bramus/ansi-php/tests/WritersTest.php new file mode 100644 index 00000000..345604dc --- /dev/null +++ b/vendor/bramus/ansi-php/tests/WritersTest.php @@ -0,0 +1,72 @@ +write('test'); + + // The written data should be echo'd (StreamWriter) + $this->assertEquals('test', ob_get_contents()); + + // Cleanup + ob_end_clean(); + + } + + public function testBufferWriter() + { + + // Create a BufferWriter + $w = new BufferWriter(); + + // Write something to the Proxy + $w->write('test'); + + // Flush its contents + $res = $w->flush(); + + // The written data should be returned + $this->assertEquals('test', $res); + + } + + public function testProxyWriter() + { + + // Start object buffering to catch any output + ob_start(); + + // Create a ProxyWriter which proxies for a StreamWriter + $w = new ProxyWriter(new StreamWriter('php://output')); + + // Write something to the Proxy + $w->write('test'); + + // Flush its contents + $res = $w->flush(); + + // The written data should be echo'd (StreamWriter) + $this->assertEquals('test', ob_get_contents()); + + // The written data should be returned too (ProxyWriter) + $this->assertEquals('test', $res); + + // Cleanup + ob_end_clean(); + + } +} \ No newline at end of file diff --git a/vendor/bramus/ansi-php/tests/bootstrap.php b/vendor/bramus/ansi-php/tests/bootstrap.php new file mode 100644 index 00000000..570b8da7 --- /dev/null +++ b/vendor/bramus/ansi-php/tests/bootstrap.php @@ -0,0 +1,10 @@ +=5.4.0", + "bramus/ansi-php": "~3.0" + }, + "require-dev": { + "monolog/monolog": "~1.0", + "phpunit/phpunit": "~4.0" + }, + "autoload": { + "psr-4": { + "Bramus\\Monolog\\": "src/" + } + } +} diff --git a/vendor/bramus/monolog-colored-line-formatter/composer.lock b/vendor/bramus/monolog-colored-line-formatter/composer.lock new file mode 100644 index 00000000..6a3a0042 --- /dev/null +++ b/vendor/bramus/monolog-colored-line-formatter/composer.lock @@ -0,0 +1,962 @@ +{ + "_readme": [ + "This file locks the dependencies of your project to a known state", + "Read more about it at http://getcomposer.org/doc/01-basic-usage.md#composer-lock-the-lock-file", + "This file is @generated automatically" + ], + "hash": "c4dc42d9548ca19ad08fdf7d5d3b7784", + "packages": [ + { + "name": "bramus/ansi-php", + "version": "3.0", + "source": { + "type": "git", + "url": "https://github.com/bramus/ansi-php.git", + "reference": "fba7715a85c9db8246bd8cf02b607cdf518face7" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/bramus/ansi-php/zipball/fba7715a85c9db8246bd8cf02b607cdf518face7", + "reference": "fba7715a85c9db8246bd8cf02b607cdf518face7", + "shasum": "" + }, + "require": { + "php": ">=5.4.0" + }, + "require-dev": { + "phpunit/phpunit": "~4.0" + }, + "type": "library", + "autoload": { + "psr-4": { + "Bramus\\Ansi\\": "src/" + } + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Bramus Van Damme", + "email": "bramus@bram.us", + "homepage": "https://www.bram.us/" + } + ], + "description": "ANSI Control Functions and ANSI Control Sequences (Colors, Erasing, etc.) for PHP CLI Apps", + "time": "2015-01-07 21:02:00" + } + ], + "packages-dev": [ + { + "name": "doctrine/instantiator", + "version": "1.0.4", + "source": { + "type": "git", + "url": "https://github.com/doctrine/instantiator.git", + "reference": "f976e5de371104877ebc89bd8fecb0019ed9c119" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/doctrine/instantiator/zipball/f976e5de371104877ebc89bd8fecb0019ed9c119", + "reference": "f976e5de371104877ebc89bd8fecb0019ed9c119", + "shasum": "" + }, + "require": { + "php": ">=5.3,<8.0-DEV" + }, + "require-dev": { + "athletic/athletic": "~0.1.8", + "ext-pdo": "*", + "ext-phar": "*", + "phpunit/phpunit": "~4.0", + "squizlabs/php_codesniffer": "2.0.*@ALPHA" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.0.x-dev" + } + }, + "autoload": { + "psr-0": { + "Doctrine\\Instantiator\\": "src" + } + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Marco Pivetta", + "email": "ocramius@gmail.com", + "homepage": "http://ocramius.github.com/" + } + ], + "description": "A small, lightweight utility to instantiate objects in PHP without invoking their constructors", + "homepage": "https://github.com/doctrine/instantiator", + "keywords": [ + "constructor", + "instantiate" + ], + "time": "2014-10-13 12:58:55" + }, + { + "name": "monolog/monolog", + "version": "1.12.0", + "source": { + "type": "git", + "url": "https://github.com/Seldaek/monolog.git", + "reference": "1fbe8c2641f2b163addf49cc5e18f144bec6b19f" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/Seldaek/monolog/zipball/1fbe8c2641f2b163addf49cc5e18f144bec6b19f", + "reference": "1fbe8c2641f2b163addf49cc5e18f144bec6b19f", + "shasum": "" + }, + "require": { + "php": ">=5.3.0", + "psr/log": "~1.0" + }, + "provide": { + "psr/log-implementation": "1.0.0" + }, + "require-dev": { + "aws/aws-sdk-php": "~2.4, >2.4.8", + "doctrine/couchdb": "~1.0@dev", + "graylog2/gelf-php": "~1.0", + "phpunit/phpunit": "~4.0", + "raven/raven": "~0.5", + "ruflin/elastica": "0.90.*", + "videlalvaro/php-amqplib": "~2.4" + }, + "suggest": { + "aws/aws-sdk-php": "Allow sending log messages to AWS services like DynamoDB", + "doctrine/couchdb": "Allow sending log messages to a CouchDB server", + "ext-amqp": "Allow sending log messages to an AMQP server (1.0+ required)", + "ext-mongo": "Allow sending log messages to a MongoDB server", + "graylog2/gelf-php": "Allow sending log messages to a GrayLog2 server", + "raven/raven": "Allow sending log messages to a Sentry server", + "rollbar/rollbar": "Allow sending log messages to Rollbar", + "ruflin/elastica": "Allow sending log messages to an Elastic Search server", + "videlalvaro/php-amqplib": "Allow sending log messages to an AMQP server using php-amqplib" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.12.x-dev" + } + }, + "autoload": { + "psr-4": { + "Monolog\\": "src/Monolog" + } + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Jordi Boggiano", + "email": "j.boggiano@seld.be", + "homepage": "http://seld.be" + } + ], + "description": "Sends your logs to files, sockets, inboxes, databases and various web services", + "homepage": "http://github.com/Seldaek/monolog", + "keywords": [ + "log", + "logging", + "psr-3" + ], + "time": "2014-12-29 21:29:35" + }, + { + "name": "phpunit/php-code-coverage", + "version": "2.0.14", + "source": { + "type": "git", + "url": "https://github.com/sebastianbergmann/php-code-coverage.git", + "reference": "ca158276c1200cc27f5409a5e338486bc0b4fc94" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/sebastianbergmann/php-code-coverage/zipball/ca158276c1200cc27f5409a5e338486bc0b4fc94", + "reference": "ca158276c1200cc27f5409a5e338486bc0b4fc94", + "shasum": "" + }, + "require": { + "php": ">=5.3.3", + "phpunit/php-file-iterator": "~1.3", + "phpunit/php-text-template": "~1.2", + "phpunit/php-token-stream": "~1.3", + "sebastian/environment": "~1.0", + "sebastian/version": "~1.0" + }, + "require-dev": { + "ext-xdebug": ">=2.1.4", + "phpunit/phpunit": "~4.1" + }, + "suggest": { + "ext-dom": "*", + "ext-xdebug": ">=2.2.1", + "ext-xmlwriter": "*" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "2.0.x-dev" + } + }, + "autoload": { + "classmap": [ + "src/" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "include-path": [ + "" + ], + "license": [ + "BSD-3-Clause" + ], + "authors": [ + { + "name": "Sebastian Bergmann", + "email": "sb@sebastian-bergmann.de", + "role": "lead" + } + ], + "description": "Library that provides collection, processing, and rendering functionality for PHP code coverage information.", + "homepage": "https://github.com/sebastianbergmann/php-code-coverage", + "keywords": [ + "coverage", + "testing", + "xunit" + ], + "time": "2014-12-26 13:28:33" + }, + { + "name": "phpunit/php-file-iterator", + "version": "1.3.4", + "source": { + "type": "git", + "url": "https://github.com/sebastianbergmann/php-file-iterator.git", + "reference": "acd690379117b042d1c8af1fafd61bde001bf6bb" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/sebastianbergmann/php-file-iterator/zipball/acd690379117b042d1c8af1fafd61bde001bf6bb", + "reference": "acd690379117b042d1c8af1fafd61bde001bf6bb", + "shasum": "" + }, + "require": { + "php": ">=5.3.3" + }, + "type": "library", + "autoload": { + "classmap": [ + "File/" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "include-path": [ + "" + ], + "license": [ + "BSD-3-Clause" + ], + "authors": [ + { + "name": "Sebastian Bergmann", + "email": "sb@sebastian-bergmann.de", + "role": "lead" + } + ], + "description": "FilterIterator implementation that filters files based on a list of suffixes.", + "homepage": "https://github.com/sebastianbergmann/php-file-iterator/", + "keywords": [ + "filesystem", + "iterator" + ], + "time": "2013-10-10 15:34:57" + }, + { + "name": "phpunit/php-text-template", + "version": "1.2.0", + "source": { + "type": "git", + "url": "https://github.com/sebastianbergmann/php-text-template.git", + "reference": "206dfefc0ffe9cebf65c413e3d0e809c82fbf00a" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/sebastianbergmann/php-text-template/zipball/206dfefc0ffe9cebf65c413e3d0e809c82fbf00a", + "reference": "206dfefc0ffe9cebf65c413e3d0e809c82fbf00a", + "shasum": "" + }, + "require": { + "php": ">=5.3.3" + }, + "type": "library", + "autoload": { + "classmap": [ + "Text/" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "include-path": [ + "" + ], + "license": [ + "BSD-3-Clause" + ], + "authors": [ + { + "name": "Sebastian Bergmann", + "email": "sb@sebastian-bergmann.de", + "role": "lead" + } + ], + "description": "Simple template engine.", + "homepage": "https://github.com/sebastianbergmann/php-text-template/", + "keywords": [ + "template" + ], + "time": "2014-01-30 17:20:04" + }, + { + "name": "phpunit/php-timer", + "version": "1.0.5", + "source": { + "type": "git", + "url": "https://github.com/sebastianbergmann/php-timer.git", + "reference": "19689d4354b295ee3d8c54b4f42c3efb69cbc17c" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/sebastianbergmann/php-timer/zipball/19689d4354b295ee3d8c54b4f42c3efb69cbc17c", + "reference": "19689d4354b295ee3d8c54b4f42c3efb69cbc17c", + "shasum": "" + }, + "require": { + "php": ">=5.3.3" + }, + "type": "library", + "autoload": { + "classmap": [ + "PHP/" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "include-path": [ + "" + ], + "license": [ + "BSD-3-Clause" + ], + "authors": [ + { + "name": "Sebastian Bergmann", + "email": "sb@sebastian-bergmann.de", + "role": "lead" + } + ], + "description": "Utility class for timing", + "homepage": "https://github.com/sebastianbergmann/php-timer/", + "keywords": [ + "timer" + ], + "time": "2013-08-02 07:42:54" + }, + { + "name": "phpunit/php-token-stream", + "version": "1.3.0", + "source": { + "type": "git", + "url": "https://github.com/sebastianbergmann/php-token-stream.git", + "reference": "f8d5d08c56de5cfd592b3340424a81733259a876" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/sebastianbergmann/php-token-stream/zipball/f8d5d08c56de5cfd592b3340424a81733259a876", + "reference": "f8d5d08c56de5cfd592b3340424a81733259a876", + "shasum": "" + }, + "require": { + "ext-tokenizer": "*", + "php": ">=5.3.3" + }, + "require-dev": { + "phpunit/phpunit": "~4.2" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.3-dev" + } + }, + "autoload": { + "classmap": [ + "src/" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "BSD-3-Clause" + ], + "authors": [ + { + "name": "Sebastian Bergmann", + "email": "sebastian@phpunit.de" + } + ], + "description": "Wrapper around PHP's tokenizer extension.", + "homepage": "https://github.com/sebastianbergmann/php-token-stream/", + "keywords": [ + "tokenizer" + ], + "time": "2014-08-31 06:12:13" + }, + { + "name": "phpunit/phpunit", + "version": "4.4.1", + "source": { + "type": "git", + "url": "https://github.com/sebastianbergmann/phpunit.git", + "reference": "6a5e49a86ce5e33b8d0657abe145057fc513543a" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/sebastianbergmann/phpunit/zipball/6a5e49a86ce5e33b8d0657abe145057fc513543a", + "reference": "6a5e49a86ce5e33b8d0657abe145057fc513543a", + "shasum": "" + }, + "require": { + "ext-dom": "*", + "ext-json": "*", + "ext-pcre": "*", + "ext-reflection": "*", + "ext-spl": "*", + "php": ">=5.3.3", + "phpunit/php-code-coverage": "~2.0", + "phpunit/php-file-iterator": "~1.3.2", + "phpunit/php-text-template": "~1.2", + "phpunit/php-timer": "~1.0.2", + "phpunit/phpunit-mock-objects": "~2.3", + "sebastian/comparator": "~1.0", + "sebastian/diff": "~1.1", + "sebastian/environment": "~1.1", + "sebastian/exporter": "~1.0", + "sebastian/global-state": "~1.0", + "sebastian/version": "~1.0", + "symfony/yaml": "~2.0" + }, + "suggest": { + "phpunit/php-invoker": "~1.1" + }, + "bin": [ + "phpunit" + ], + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "4.4.x-dev" + } + }, + "autoload": { + "classmap": [ + "src/" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "BSD-3-Clause" + ], + "authors": [ + { + "name": "Sebastian Bergmann", + "email": "sebastian@phpunit.de", + "role": "lead" + } + ], + "description": "The PHP Unit Testing framework.", + "homepage": "https://phpunit.de/", + "keywords": [ + "phpunit", + "testing", + "xunit" + ], + "time": "2014-12-28 07:57:05" + }, + { + "name": "phpunit/phpunit-mock-objects", + "version": "2.3.0", + "source": { + "type": "git", + "url": "https://github.com/sebastianbergmann/phpunit-mock-objects.git", + "reference": "c63d2367247365f688544f0d500af90a11a44c65" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/sebastianbergmann/phpunit-mock-objects/zipball/c63d2367247365f688544f0d500af90a11a44c65", + "reference": "c63d2367247365f688544f0d500af90a11a44c65", + "shasum": "" + }, + "require": { + "doctrine/instantiator": "~1.0,>=1.0.1", + "php": ">=5.3.3", + "phpunit/php-text-template": "~1.2" + }, + "require-dev": { + "phpunit/phpunit": "~4.3" + }, + "suggest": { + "ext-soap": "*" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "2.3.x-dev" + } + }, + "autoload": { + "classmap": [ + "src/" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "BSD-3-Clause" + ], + "authors": [ + { + "name": "Sebastian Bergmann", + "email": "sb@sebastian-bergmann.de", + "role": "lead" + } + ], + "description": "Mock Object library for PHPUnit", + "homepage": "https://github.com/sebastianbergmann/phpunit-mock-objects/", + "keywords": [ + "mock", + "xunit" + ], + "time": "2014-10-03 05:12:11" + }, + { + "name": "psr/log", + "version": "1.0.0", + "source": { + "type": "git", + "url": "https://github.com/php-fig/log.git", + "reference": "fe0936ee26643249e916849d48e3a51d5f5e278b" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/php-fig/log/zipball/fe0936ee26643249e916849d48e3a51d5f5e278b", + "reference": "fe0936ee26643249e916849d48e3a51d5f5e278b", + "shasum": "" + }, + "type": "library", + "autoload": { + "psr-0": { + "Psr\\Log\\": "" + } + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "PHP-FIG", + "homepage": "http://www.php-fig.org/" + } + ], + "description": "Common interface for logging libraries", + "keywords": [ + "log", + "psr", + "psr-3" + ], + "time": "2012-12-21 11:40:51" + }, + { + "name": "sebastian/comparator", + "version": "1.1.0", + "source": { + "type": "git", + "url": "https://github.com/sebastianbergmann/comparator.git", + "reference": "c484a80f97573ab934e37826dba0135a3301b26a" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/sebastianbergmann/comparator/zipball/c484a80f97573ab934e37826dba0135a3301b26a", + "reference": "c484a80f97573ab934e37826dba0135a3301b26a", + "shasum": "" + }, + "require": { + "php": ">=5.3.3", + "sebastian/diff": "~1.1", + "sebastian/exporter": "~1.0" + }, + "require-dev": { + "phpunit/phpunit": "~4.1" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.1.x-dev" + } + }, + "autoload": { + "classmap": [ + "src/" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "BSD-3-Clause" + ], + "authors": [ + { + "name": "Jeff Welch", + "email": "whatthejeff@gmail.com" + }, + { + "name": "Volker Dusch", + "email": "github@wallbash.com" + }, + { + "name": "Bernhard Schussek", + "email": "bschussek@2bepublished.at" + }, + { + "name": "Sebastian Bergmann", + "email": "sebastian@phpunit.de" + } + ], + "description": "Provides the functionality to compare PHP values for equality", + "homepage": "http://www.github.com/sebastianbergmann/comparator", + "keywords": [ + "comparator", + "compare", + "equality" + ], + "time": "2014-11-16 21:32:38" + }, + { + "name": "sebastian/diff", + "version": "1.2.0", + "source": { + "type": "git", + "url": "https://github.com/sebastianbergmann/diff.git", + "reference": "5843509fed39dee4b356a306401e9dd1a931fec7" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/sebastianbergmann/diff/zipball/5843509fed39dee4b356a306401e9dd1a931fec7", + "reference": "5843509fed39dee4b356a306401e9dd1a931fec7", + "shasum": "" + }, + "require": { + "php": ">=5.3.3" + }, + "require-dev": { + "phpunit/phpunit": "~4.2" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.2-dev" + } + }, + "autoload": { + "classmap": [ + "src/" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "BSD-3-Clause" + ], + "authors": [ + { + "name": "Kore Nordmann", + "email": "mail@kore-nordmann.de" + }, + { + "name": "Sebastian Bergmann", + "email": "sebastian@phpunit.de" + } + ], + "description": "Diff implementation", + "homepage": "http://www.github.com/sebastianbergmann/diff", + "keywords": [ + "diff" + ], + "time": "2014-08-15 10:29:00" + }, + { + "name": "sebastian/environment", + "version": "1.2.1", + "source": { + "type": "git", + "url": "https://github.com/sebastianbergmann/environment.git", + "reference": "6e6c71d918088c251b181ba8b3088af4ac336dd7" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/sebastianbergmann/environment/zipball/6e6c71d918088c251b181ba8b3088af4ac336dd7", + "reference": "6e6c71d918088c251b181ba8b3088af4ac336dd7", + "shasum": "" + }, + "require": { + "php": ">=5.3.3" + }, + "require-dev": { + "phpunit/phpunit": "~4.3" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.2.x-dev" + } + }, + "autoload": { + "classmap": [ + "src/" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "BSD-3-Clause" + ], + "authors": [ + { + "name": "Sebastian Bergmann", + "email": "sebastian@phpunit.de" + } + ], + "description": "Provides functionality to handle HHVM/PHP environments", + "homepage": "http://www.github.com/sebastianbergmann/environment", + "keywords": [ + "Xdebug", + "environment", + "hhvm" + ], + "time": "2014-10-25 08:00:45" + }, + { + "name": "sebastian/exporter", + "version": "1.0.2", + "source": { + "type": "git", + "url": "https://github.com/sebastianbergmann/exporter.git", + "reference": "c7d59948d6e82818e1bdff7cadb6c34710eb7dc0" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/sebastianbergmann/exporter/zipball/c7d59948d6e82818e1bdff7cadb6c34710eb7dc0", + "reference": "c7d59948d6e82818e1bdff7cadb6c34710eb7dc0", + "shasum": "" + }, + "require": { + "php": ">=5.3.3" + }, + "require-dev": { + "phpunit/phpunit": "~4.0" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.0.x-dev" + } + }, + "autoload": { + "classmap": [ + "src/" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "BSD-3-Clause" + ], + "authors": [ + { + "name": "Jeff Welch", + "email": "whatthejeff@gmail.com" + }, + { + "name": "Volker Dusch", + "email": "github@wallbash.com" + }, + { + "name": "Bernhard Schussek", + "email": "bschussek@2bepublished.at" + }, + { + "name": "Sebastian Bergmann", + "email": "sebastian@phpunit.de" + }, + { + "name": "Adam Harvey", + "email": "aharvey@php.net" + } + ], + "description": "Provides the functionality to export PHP variables for visualization", + "homepage": "http://www.github.com/sebastianbergmann/exporter", + "keywords": [ + "export", + "exporter" + ], + "time": "2014-09-10 00:51:36" + }, + { + "name": "sebastian/global-state", + "version": "1.0.0", + "source": { + "type": "git", + "url": "https://github.com/sebastianbergmann/global-state.git", + "reference": "c7428acdb62ece0a45e6306f1ae85e1c05b09c01" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/sebastianbergmann/global-state/zipball/c7428acdb62ece0a45e6306f1ae85e1c05b09c01", + "reference": "c7428acdb62ece0a45e6306f1ae85e1c05b09c01", + "shasum": "" + }, + "require": { + "php": ">=5.3.3" + }, + "require-dev": { + "phpunit/phpunit": "~4.2" + }, + "suggest": { + "ext-uopz": "*" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.0-dev" + } + }, + "autoload": { + "classmap": [ + "src/" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "BSD-3-Clause" + ], + "authors": [ + { + "name": "Sebastian Bergmann", + "email": "sebastian@phpunit.de" + } + ], + "description": "Snapshotting of global state", + "homepage": "http://www.github.com/sebastianbergmann/global-state", + "keywords": [ + "global state" + ], + "time": "2014-10-06 09:23:50" + }, + { + "name": "sebastian/version", + "version": "1.0.4", + "source": { + "type": "git", + "url": "https://github.com/sebastianbergmann/version.git", + "reference": "a77d9123f8e809db3fbdea15038c27a95da4058b" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/sebastianbergmann/version/zipball/a77d9123f8e809db3fbdea15038c27a95da4058b", + "reference": "a77d9123f8e809db3fbdea15038c27a95da4058b", + "shasum": "" + }, + "type": "library", + "autoload": { + "classmap": [ + "src/" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "BSD-3-Clause" + ], + "authors": [ + { + "name": "Sebastian Bergmann", + "email": "sebastian@phpunit.de", + "role": "lead" + } + ], + "description": "Library that helps with managing the version number of Git-hosted PHP projects", + "homepage": "https://github.com/sebastianbergmann/version", + "time": "2014-12-15 14:25:24" + }, + { + "name": "symfony/yaml", + "version": "v2.6.3", + "target-dir": "Symfony/Component/Yaml", + "source": { + "type": "git", + "url": "https://github.com/symfony/Yaml.git", + "reference": "82462a90848a52c2533aa6b598b107d68076b018" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/symfony/Yaml/zipball/82462a90848a52c2533aa6b598b107d68076b018", + "reference": "82462a90848a52c2533aa6b598b107d68076b018", + "shasum": "" + }, + "require": { + "php": ">=5.3.3" + }, + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "2.6-dev" + } + }, + "autoload": { + "psr-0": { + "Symfony\\Component\\Yaml\\": "" + } + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Symfony Community", + "homepage": "http://symfony.com/contributors" + }, + { + "name": "Fabien Potencier", + "email": "fabien@symfony.com" + } + ], + "description": "Symfony Yaml Component", + "homepage": "http://symfony.com", + "time": "2015-01-03 15:33:07" + } + ], + "aliases": [], + "minimum-stability": "stable", + "stability-flags": [], + "prefer-stable": false, + "prefer-lowest": false, + "platform": { + "php": ">=5.4.0" + }, + "platform-dev": [] +} diff --git a/vendor/bramus/monolog-colored-line-formatter/phpunit.xml.dist b/vendor/bramus/monolog-colored-line-formatter/phpunit.xml.dist new file mode 100644 index 00000000..31db2e84 --- /dev/null +++ b/vendor/bramus/monolog-colored-line-formatter/phpunit.xml.dist @@ -0,0 +1,14 @@ + + + + + + tests/ + + + + + src/ + + + \ No newline at end of file diff --git a/vendor/bramus/monolog-colored-line-formatter/readme.md b/vendor/bramus/monolog-colored-line-formatter/readme.md new file mode 100644 index 00000000..02fc4a7b --- /dev/null +++ b/vendor/bramus/monolog-colored-line-formatter/readme.md @@ -0,0 +1,132 @@ +# Monolog Colored Line Formatter + +A Formatter for Monolog with color support +Built by Bramus! - [https://www.bram.us/](https://www.bram.us/) + +[![Build Status](https://api.travis-ci.org/bramus/monolog-colored-line-formatter.png)](http://travis-ci.org/bramus/monolog-colored-line-formatter) + +## About + +`bramus/monolog-colored-line-formatter` is a formatter for use with [Monolog](https://github.com/Seldaek/monolog). It augments the [Monolog LineFormatter](https://github.com/Seldaek/monolog/blob/master/src/Monolog/Formatter/LineFormatter.php) by adding color support. To achieve this `bramus/monolog-colored-line-formatter` uses ANSI Escape Sequences – [provided by `bramus/ansi-php`](https://github.com/bramus/ansi-php) – which makes it perfect for usage on text based terminals (viz. the shell). + +`bramus/monolog-colored-line-formatter` ships with a default color scheme, yet it can be adjusted to fit your own needs. + +## Prerequisites/Requirements + +- PHP 5.4.0 or greater + +## Installation + +Installation is possible using Composer + +``` +composer require bramus/monolog-colored-line-formatter ~2.0 +``` + +## Usage + +Create an instance of `\Bramus\Monolog\Formatter\ColoredLineFormatter` and set it as the formatter for the `\Monolog\Handler\StreamHandler` that you use with your `\Monolog\Logger` instance. + +``` +use \Monolog\Logger; +use \Monolog\Handler\StreamHandler; +use \Bramus\Monolog\Formatter\ColoredLineFormatter; + +$log = new Logger('DEMO'); +$handler = new StreamHandler('php://stdout', Logger::WARNING); +$handler->setFormatter(new ColoredLineFormatter()); +$log->pushHandler($handler); + +$log->addError('Lorem ipsum dolor sit amet, consectetur adipiscing elit.'); +``` + +## Color Schemes + +### Available Color Schemes + +#### Color Scheme: DefaultScheme + +![Monolog Colored Line Formatter](https://raw.githubusercontent.com/bramus/monolog-colored-line-formatter/master/screenshots/colorscheme-default.gif) + +#### Color Scheme: TrafficLight + +![Monolog Colored Line Formatter](https://raw.githubusercontent.com/bramus/monolog-colored-line-formatter/master/screenshots/colorscheme-trafficlight.gif) + +### Activating a Color Scheme + +Color Schemes are defined as classes. If you do not provide any color scheme the default one will be used. + +To activate a color scheme pass it as the first argument of the `ColoredLineFormatter` Constructor. All successive arguments are the ones as required by the `\Monolog\Formatter\LineFormatter` class. + +``` +use \Monolog\Logger; +use \Monolog\Handler\StreamHandler; +use \Bramus\Monolog\Formatter\ColoredLineFormatter; +use \Bramus\Monolog\Formatter\ColorSchemes\TrafficLight; + +$log = new Logger('DEMO'); +$handler = new StreamHandler('php://stdout', Logger::WARNING); +$handler->setFormatter(new ColoredLineFormatter(new TrafficLight())); +$log->pushHandler($handler); +``` + +Alternatively it's also possible to activate it using the `setColorScheme()` method of a `ColoredLineFormatter` instance. + +### Creating your own Custom Color Scheme + +To define your own color scheme make a class that implements the `\Bramus\Monolog\Formatter\ColorSchemes\ColorSchemeInterface` interface. To make things more easy a trait `ColorSchemeTrait` is defined. + +``` +namespace Bramus\Monolog\Formatter\ColorSchemes; + +use Monolog\Logger; +use Bramus\Ansi\Ansi; +use Bramus\Ansi\ControlSequences\EscapeSequences\Enums\SGR; + +class TrafficLight implements ColorSchemeInterface +{ + /** + * Use the ColorSchemeTrait and alias its constructor + */ + use ColorSchemeTrait { + ColorSchemeTrait::__construct as private __constructTrait; + } + + /** + * [__construct description] + */ + public function __construct() + { + // Call Trait Constructor, so that we have $this->ansi available + $this->__constructTrait(); + + // Our Color Scheme + $this->setColorizeArray(array( + Logger::DEBUG => $this->ansi->color(SGR::COLOR_FG_WHITE)->get(), + Logger::INFO => $this->ansi->color(SGR::COLOR_FG_GREEN)->get(), + Logger::NOTICE => $this->ansi->color(SGR::COLOR_FG_CYAN)->get(), + Logger::WARNING => $this->ansi->color(SGR::COLOR_FG_YELLOW)->get(), + Logger::ERROR => $this->ansi->color(SGR::COLOR_FG_RED)->get(), + Logger::CRITICAL => $this->ansi->color(SGR::COLOR_FG_RED)->underline()->get(), + Logger::ALERT => $this->ansi->color(array(SGR::COLOR_FG_WHITE, SGR::COLOR_BG_RED_BRIGHT))->get(), + Logger::EMERGENCY => $this->ansi->color(SGR::COLOR_BG_RED_BRIGHT)->blink()->color(SGR::COLOR_FG_WHITE)->get(), + )); + } +} +``` + +Please refer to [the `bramus/ansi-php` documentation](https://github.com/bramus/ansi-php) to define your own styles and colors. + +## Unit Testing + +`bramus/monolog-colored-line-formatter` ships with unit tests using [PHPUnit](https://github.com/sebastianbergmann/phpunit/). + +- If PHPUnit is installed globally run `phpunit` to run the tests. + +- If PHPUnit is not installed globally, install it locally through composer by running `composer install --dev`. Run the tests themselves by calling `vendor/bin/phpunit`. + +Unit tests are also automatically run [on Travis CI](http://travis-ci.org/bramus/monolog-colored-line-formatter) + +## License + +`bramus/monolog-colored-line-formatter` is released under the MIT public license. See the enclosed `LICENSE.txt` for details. diff --git a/vendor/bramus/monolog-colored-line-formatter/screenshots/colorscheme-default.gif b/vendor/bramus/monolog-colored-line-formatter/screenshots/colorscheme-default.gif new file mode 100644 index 00000000..ad7aab00 Binary files /dev/null and b/vendor/bramus/monolog-colored-line-formatter/screenshots/colorscheme-default.gif differ diff --git a/vendor/bramus/monolog-colored-line-formatter/screenshots/colorscheme-trafficlight.gif b/vendor/bramus/monolog-colored-line-formatter/screenshots/colorscheme-trafficlight.gif new file mode 100644 index 00000000..ab1688d7 Binary files /dev/null and b/vendor/bramus/monolog-colored-line-formatter/screenshots/colorscheme-trafficlight.gif differ diff --git a/vendor/bramus/monolog-colored-line-formatter/src/Formatter/ColorSchemes/ColorSchemeInterface.php b/vendor/bramus/monolog-colored-line-formatter/src/Formatter/ColorSchemes/ColorSchemeInterface.php new file mode 100644 index 00000000..34f9cf0c --- /dev/null +++ b/vendor/bramus/monolog-colored-line-formatter/src/Formatter/ColorSchemes/ColorSchemeInterface.php @@ -0,0 +1,31 @@ +ansi = new Ansi(new BufferWriter()); + } + + /** + * Set the Color Scheme Array + * @param array $colorScheme The Color Scheme Array + */ + public function setColorizeArray(array $colorScheme) + { + // Only store entries that exist as Monolog\Logger levels + $allowedLogLevels = array_values(\Monolog\Logger::getLevels()); + $colorScheme = array_intersect_key($colorScheme, array_flip($allowedLogLevels)); + + // Store the filtered colorScheme + $this->colorScheme = $colorScheme; + } + + /** + * Get the Color Scheme Array + * @return array The Color Scheme Array + */ + public function getColorizeArray() + { + return $this->colorScheme; + } + + /** + * Get the Color Scheme String for the given Level + * @param int $level The Logger Level + * @return string The Color Scheme String + */ + public function getColorizeString($level) + { + return isset($this->colorScheme[$level]) ? $this->colorScheme[$level] : ''; + } + + /** + * Get the string identifier that closes/finishes the styling + * @return string The reset string + */ + public function getResetString() + { + return $this->ansi->reset()->get(); + } +} diff --git a/vendor/bramus/monolog-colored-line-formatter/src/Formatter/ColorSchemes/DefaultScheme.php b/vendor/bramus/monolog-colored-line-formatter/src/Formatter/ColorSchemes/DefaultScheme.php new file mode 100644 index 00000000..d6649ba5 --- /dev/null +++ b/vendor/bramus/monolog-colored-line-formatter/src/Formatter/ColorSchemes/DefaultScheme.php @@ -0,0 +1,38 @@ +ansi available + $this->__constructTrait(); + + // Our Color Scheme + $this->setColorizeArray(array( + Logger::DEBUG => $this->ansi->color(SGR::COLOR_FG_WHITE)->get(), + Logger::INFO => $this->ansi->color(SGR::COLOR_FG_GREEN)->get(), + Logger::NOTICE => $this->ansi->color(SGR::COLOR_FG_CYAN)->get(), + Logger::WARNING => $this->ansi->color(SGR::COLOR_FG_YELLOW)->get(), + Logger::ERROR => $this->ansi->color(SGR::COLOR_FG_RED)->get(), + Logger::CRITICAL => $this->ansi->color(SGR::COLOR_FG_RED)->underline()->get(), + Logger::ALERT => $this->ansi->color(array(SGR::COLOR_FG_WHITE, SGR::COLOR_BG_RED_BRIGHT))->get(), + Logger::EMERGENCY => $this->ansi->color(SGR::COLOR_BG_RED_BRIGHT)->blink()->color(SGR::COLOR_FG_WHITE)->get(), + )); + } +} diff --git a/vendor/bramus/monolog-colored-line-formatter/src/Formatter/ColorSchemes/TrafficLight.php b/vendor/bramus/monolog-colored-line-formatter/src/Formatter/ColorSchemes/TrafficLight.php new file mode 100644 index 00000000..e1be0bef --- /dev/null +++ b/vendor/bramus/monolog-colored-line-formatter/src/Formatter/ColorSchemes/TrafficLight.php @@ -0,0 +1,38 @@ +ansi available + $this->__constructTrait(); + + // Our Color Scheme + $this->setColorizeArray(array( + Logger::DEBUG => $this->ansi->sgr(array(SGR::COLOR_FG_GREEN, SGR::STYLE_INTENSITY_FAINT))->get(), + Logger::INFO => $this->ansi->sgr(array(SGR::COLOR_FG_GREEN, SGR::STYLE_INTENSITY_NORMAL))->get(), + Logger::NOTICE => $this->ansi->sgr(array(SGR::COLOR_FG_GREEN, SGR::STYLE_INTENSITY_BRIGHT))->get(), + Logger::WARNING => $this->ansi->sgr(array(SGR::COLOR_FG_YELLOW, SGR::STYLE_INTENSITY_FAINT))->get(), + Logger::ERROR => $this->ansi->sgr(array(SGR::COLOR_FG_YELLOW, SGR::STYLE_INTENSITY_NORMAL))->get(), + Logger::CRITICAL => $this->ansi->sgr(array(SGR::COLOR_FG_RED, SGR::STYLE_INTENSITY_NORMAL))->get(), + Logger::ALERT => $this->ansi->sgr(array(SGR::COLOR_FG_RED_BRIGHT, SGR::STYLE_INTENSITY_BRIGHT))->get(), + Logger::EMERGENCY => $this->ansi->sgr(array(SGR::COLOR_FG_RED_BRIGHT, SGR::STYLE_INTENSITY_BRIGHT, SGR::STYLE_BLINK))->get(), + )); + } +} diff --git a/vendor/bramus/monolog-colored-line-formatter/src/Formatter/ColoredLineFormatter.php b/vendor/bramus/monolog-colored-line-formatter/src/Formatter/ColoredLineFormatter.php new file mode 100644 index 00000000..a0730893 --- /dev/null +++ b/vendor/bramus/monolog-colored-line-formatter/src/Formatter/ColoredLineFormatter.php @@ -0,0 +1,66 @@ +setColorScheme($colorScheme); + + // Call Parent Constructor + parent::__construct($format, $dateFormat, $allowInlineLineBreaks, $ignoreEmptyContextAndExtra); + } + + /** + * Gets The Color Scheme + * @return ColorSchemeInterface + */ + public function getColorScheme() + { + if (!$this->colorScheme) { + $this->colorScheme = new ColorSchemes\DefaultScheme(); + } + + return $this->colorScheme; + } + + /** + * Sets The Color Scheme + * @param array + */ + public function setColorScheme(ColorSchemeInterface $colorScheme) + { + $this->colorScheme = $colorScheme; + } + + /** + * {@inheritdoc} + */ + public function format(array $record) + { + // Get the Color Scheme + $colorScheme = $this->getColorScheme(); + + // Let the parent class to the formatting, yet wrap it in the color linked to the level + return $colorScheme->getColorizeString($record['level']).trim(parent::format($record)).$colorScheme->getResetString()."\n"; + } +} diff --git a/vendor/bramus/monolog-colored-line-formatter/tests/ColoredLineFormatterTest.php b/vendor/bramus/monolog-colored-line-formatter/tests/ColoredLineFormatterTest.php new file mode 100644 index 00000000..adce4e59 --- /dev/null +++ b/vendor/bramus/monolog-colored-line-formatter/tests/ColoredLineFormatterTest.php @@ -0,0 +1,110 @@ +ansi = new Ansi(new BufferWriter()); + $this->clf = new ColoredLineFormatter(); + } + + protected function tearDown() + { + // ... + } + + public function testInstantiation() + { + $this->assertInstanceOf('\Bramus\Monolog\Formatter\ColoredLineFormatter', $this->clf); + } + + public function testReset() + { + $this->assertEquals($this->clf->getColorScheme()->getResetString(), "\033[0m"); + } + + public function testDefaultColorScheme() + { + $defaultScheme = new \Bramus\Monolog\Formatter\ColorSchemes\DefaultScheme(); + + $this->assertEquals( + $this->clf->getColorScheme()->getColorizeArray(), + $defaultScheme->getColorizeArray() + ); + } + + public function testSetColorSchemeViaConstructor() + { + $newScheme = new \Bramus\Monolog\Formatter\ColorSchemes\TrafficLight(); + $this->clf = new ColoredLineFormatter($newScheme); + + $this->assertEquals( + $this->clf->getColorScheme()->getColorizeArray(), + $newScheme->getColorizeArray() + ); + } + + public function testSetColorSchemeViaSetColorScheme() + { + $newScheme = new \Bramus\Monolog\Formatter\ColorSchemes\TrafficLight(); + $this->clf->setColorScheme($newScheme); + + $this->assertEquals( + $this->clf->getColorScheme()->getColorizeArray(), + $newScheme->getColorizeArray() + ); + } + + public function testSetColorSchemeFilter() + { + + $dummyArray = array( + Logger::DEBUG => $this->ansi->sgr(array(SGR::COLOR_FG_GREEN, SGR::STYLE_INTENSITY_FAINT))->get(), + '123' => 'foo', + 9000 => 'bar', + Logger::INFO => $this->ansi->sgr(array(SGR::COLOR_FG_GREEN, SGR::STYLE_INTENSITY_NORMAL))->get(), + Logger::NOTICE => $this->ansi->sgr(array(SGR::COLOR_FG_GREEN, SGR::STYLE_INTENSITY_BRIGHT))->get(), + 'foo' => 200, + Logger::WARNING => $this->ansi->sgr(array(SGR::COLOR_FG_YELLOW, SGR::STYLE_INTENSITY_FAINT))->get(), + Logger::ERROR => $this->ansi->sgr(array(SGR::COLOR_FG_YELLOW, SGR::STYLE_INTENSITY_NORMAL))->get(), + Logger::CRITICAL => $this->ansi->sgr(array(SGR::COLOR_FG_RED, SGR::STYLE_INTENSITY_NORMAL))->get(), + Logger::ALERT => $this->ansi->sgr(array(SGR::COLOR_FG_RED_BRIGHT, SGR::STYLE_INTENSITY_BRIGHT))->get(), + Logger::EMERGENCY => $this->ansi->sgr(array(SGR::COLOR_FG_RED_BRIGHT, SGR::STYLE_INTENSITY_BRIGHT, SGR::STYLE_BLINK))->get(), + ); + + $this->clf->getColorScheme()->setColorizeArray($dummyArray); + + foreach(Logger::getLevels() as $level) + { + $this->assertArrayHasKey($level, $this->clf->getColorScheme()->getColorizeArray()); + } + + $this->assertArrayNotHasKey('123', $this->clf->getColorScheme()->getColorizeArray()); + $this->assertArrayNotHasKey('foo', $this->clf->getColorScheme()->getColorizeArray()); + $this->assertArrayNotHasKey(9000, $this->clf->getColorScheme()->getColorizeArray()); + + } + + // public function testDemo() + // { + // foreach (Logger::getLevels() as $level) { + // echo $this->clf->format(array( + // 'level' => $level, + // 'level_name' => Logger::getLevelName($level), + // 'channel' => 'DEMO', + // 'message' => 'Lorem ipsum dolor sit amet, consectetur adipiscing elit.', + // 'datetime' => \DateTime::createFromFormat('U.u', sprintf('%.6F', microtime(true)), new \DateTimeZone(date_default_timezone_get() ?: 'UTC')), + // 'context' => array(), + // 'extra' => array(), + // )); + // } + // } +} + +// EOF diff --git a/vendor/bramus/monolog-colored-line-formatter/tests/bootstrap.php b/vendor/bramus/monolog-colored-line-formatter/tests/bootstrap.php new file mode 100644 index 00000000..570b8da7 --- /dev/null +++ b/vendor/bramus/monolog-colored-line-formatter/tests/bootstrap.php @@ -0,0 +1,10 @@ + + * Jordi Boggiano + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Composer\Autoload; + +/** + * ClassLoader implements a PSR-0, PSR-4 and classmap class loader. + * + * $loader = new \Composer\Autoload\ClassLoader(); + * + * // register classes with namespaces + * $loader->add('Symfony\Component', __DIR__.'/component'); + * $loader->add('Symfony', __DIR__.'/framework'); + * + * // activate the autoloader + * $loader->register(); + * + * // to enable searching the include path (eg. for PEAR packages) + * $loader->setUseIncludePath(true); + * + * In this example, if you try to use a class in the Symfony\Component + * namespace or one of its children (Symfony\Component\Console for instance), + * the autoloader will first look for the class under the component/ + * directory, and it will then fallback to the framework/ directory if not + * found before giving up. + * + * This class is loosely based on the Symfony UniversalClassLoader. + * + * @author Fabien Potencier + * @author Jordi Boggiano + * @see http://www.php-fig.org/psr/psr-0/ + * @see http://www.php-fig.org/psr/psr-4/ + */ +class ClassLoader +{ + // PSR-4 + private $prefixLengthsPsr4 = array(); + private $prefixDirsPsr4 = array(); + private $fallbackDirsPsr4 = array(); + + // PSR-0 + private $prefixesPsr0 = array(); + private $fallbackDirsPsr0 = array(); + + private $useIncludePath = false; + private $classMap = array(); + private $classMapAuthoritative = false; + private $missingClasses = array(); + private $apcuPrefix; + + public function getPrefixes() + { + if (!empty($this->prefixesPsr0)) { + return call_user_func_array('array_merge', $this->prefixesPsr0); + } + + return array(); + } + + public function getPrefixesPsr4() + { + return $this->prefixDirsPsr4; + } + + public function getFallbackDirs() + { + return $this->fallbackDirsPsr0; + } + + public function getFallbackDirsPsr4() + { + return $this->fallbackDirsPsr4; + } + + public function getClassMap() + { + return $this->classMap; + } + + /** + * @param array $classMap Class to filename map + */ + public function addClassMap(array $classMap) + { + if ($this->classMap) { + $this->classMap = array_merge($this->classMap, $classMap); + } else { + $this->classMap = $classMap; + } + } + + /** + * Registers a set of PSR-0 directories for a given prefix, either + * appending or prepending to the ones previously set for this prefix. + * + * @param string $prefix The prefix + * @param array|string $paths The PSR-0 root directories + * @param bool $prepend Whether to prepend the directories + */ + public function add($prefix, $paths, $prepend = false) + { + if (!$prefix) { + if ($prepend) { + $this->fallbackDirsPsr0 = array_merge( + (array) $paths, + $this->fallbackDirsPsr0 + ); + } else { + $this->fallbackDirsPsr0 = array_merge( + $this->fallbackDirsPsr0, + (array) $paths + ); + } + + return; + } + + $first = $prefix[0]; + if (!isset($this->prefixesPsr0[$first][$prefix])) { + $this->prefixesPsr0[$first][$prefix] = (array) $paths; + + return; + } + if ($prepend) { + $this->prefixesPsr0[$first][$prefix] = array_merge( + (array) $paths, + $this->prefixesPsr0[$first][$prefix] + ); + } else { + $this->prefixesPsr0[$first][$prefix] = array_merge( + $this->prefixesPsr0[$first][$prefix], + (array) $paths + ); + } + } + + /** + * Registers a set of PSR-4 directories for a given namespace, either + * appending or prepending to the ones previously set for this namespace. + * + * @param string $prefix The prefix/namespace, with trailing '\\' + * @param array|string $paths The PSR-4 base directories + * @param bool $prepend Whether to prepend the directories + * + * @throws \InvalidArgumentException + */ + public function addPsr4($prefix, $paths, $prepend = false) + { + if (!$prefix) { + // Register directories for the root namespace. + if ($prepend) { + $this->fallbackDirsPsr4 = array_merge( + (array) $paths, + $this->fallbackDirsPsr4 + ); + } else { + $this->fallbackDirsPsr4 = array_merge( + $this->fallbackDirsPsr4, + (array) $paths + ); + } + } elseif (!isset($this->prefixDirsPsr4[$prefix])) { + // Register directories for a new namespace. + $length = strlen($prefix); + if ('\\' !== $prefix[$length - 1]) { + throw new \InvalidArgumentException("A non-empty PSR-4 prefix must end with a namespace separator."); + } + $this->prefixLengthsPsr4[$prefix[0]][$prefix] = $length; + $this->prefixDirsPsr4[$prefix] = (array) $paths; + } elseif ($prepend) { + // Prepend directories for an already registered namespace. + $this->prefixDirsPsr4[$prefix] = array_merge( + (array) $paths, + $this->prefixDirsPsr4[$prefix] + ); + } else { + // Append directories for an already registered namespace. + $this->prefixDirsPsr4[$prefix] = array_merge( + $this->prefixDirsPsr4[$prefix], + (array) $paths + ); + } + } + + /** + * Registers a set of PSR-0 directories for a given prefix, + * replacing any others previously set for this prefix. + * + * @param string $prefix The prefix + * @param array|string $paths The PSR-0 base directories + */ + public function set($prefix, $paths) + { + if (!$prefix) { + $this->fallbackDirsPsr0 = (array) $paths; + } else { + $this->prefixesPsr0[$prefix[0]][$prefix] = (array) $paths; + } + } + + /** + * Registers a set of PSR-4 directories for a given namespace, + * replacing any others previously set for this namespace. + * + * @param string $prefix The prefix/namespace, with trailing '\\' + * @param array|string $paths The PSR-4 base directories + * + * @throws \InvalidArgumentException + */ + public function setPsr4($prefix, $paths) + { + if (!$prefix) { + $this->fallbackDirsPsr4 = (array) $paths; + } else { + $length = strlen($prefix); + if ('\\' !== $prefix[$length - 1]) { + throw new \InvalidArgumentException("A non-empty PSR-4 prefix must end with a namespace separator."); + } + $this->prefixLengthsPsr4[$prefix[0]][$prefix] = $length; + $this->prefixDirsPsr4[$prefix] = (array) $paths; + } + } + + /** + * Turns on searching the include path for class files. + * + * @param bool $useIncludePath + */ + public function setUseIncludePath($useIncludePath) + { + $this->useIncludePath = $useIncludePath; + } + + /** + * Can be used to check if the autoloader uses the include path to check + * for classes. + * + * @return bool + */ + public function getUseIncludePath() + { + return $this->useIncludePath; + } + + /** + * Turns off searching the prefix and fallback directories for classes + * that have not been registered with the class map. + * + * @param bool $classMapAuthoritative + */ + public function setClassMapAuthoritative($classMapAuthoritative) + { + $this->classMapAuthoritative = $classMapAuthoritative; + } + + /** + * Should class lookup fail if not found in the current class map? + * + * @return bool + */ + public function isClassMapAuthoritative() + { + return $this->classMapAuthoritative; + } + + /** + * APCu prefix to use to cache found/not-found classes, if the extension is enabled. + * + * @param string|null $apcuPrefix + */ + public function setApcuPrefix($apcuPrefix) + { + $this->apcuPrefix = function_exists('apcu_fetch') && filter_var(ini_get('apc.enabled'), FILTER_VALIDATE_BOOLEAN) ? $apcuPrefix : null; + } + + /** + * The APCu prefix in use, or null if APCu caching is not enabled. + * + * @return string|null + */ + public function getApcuPrefix() + { + return $this->apcuPrefix; + } + + /** + * Registers this instance as an autoloader. + * + * @param bool $prepend Whether to prepend the autoloader or not + */ + public function register($prepend = false) + { + spl_autoload_register(array($this, 'loadClass'), true, $prepend); + } + + /** + * Unregisters this instance as an autoloader. + */ + public function unregister() + { + spl_autoload_unregister(array($this, 'loadClass')); + } + + /** + * Loads the given class or interface. + * + * @param string $class The name of the class + * @return bool|null True if loaded, null otherwise + */ + public function loadClass($class) + { + if ($file = $this->findFile($class)) { + includeFile($file); + + return true; + } + } + + /** + * Finds the path to the file where the class is defined. + * + * @param string $class The name of the class + * + * @return string|false The path if found, false otherwise + */ + public function findFile($class) + { + // class map lookup + if (isset($this->classMap[$class])) { + return $this->classMap[$class]; + } + if ($this->classMapAuthoritative || isset($this->missingClasses[$class])) { + return false; + } + if (null !== $this->apcuPrefix) { + $file = apcu_fetch($this->apcuPrefix.$class, $hit); + if ($hit) { + return $file; + } + } + + $file = $this->findFileWithExtension($class, '.php'); + + // Search for Hack files if we are running on HHVM + if (false === $file && defined('HHVM_VERSION')) { + $file = $this->findFileWithExtension($class, '.hh'); + } + + if (null !== $this->apcuPrefix) { + apcu_add($this->apcuPrefix.$class, $file); + } + + if (false === $file) { + // Remember that this class does not exist. + $this->missingClasses[$class] = true; + } + + return $file; + } + + private function findFileWithExtension($class, $ext) + { + // PSR-4 lookup + $logicalPathPsr4 = strtr($class, '\\', DIRECTORY_SEPARATOR) . $ext; + + $first = $class[0]; + if (isset($this->prefixLengthsPsr4[$first])) { + $subPath = $class; + while (false !== $lastPos = strrpos($subPath, '\\')) { + $subPath = substr($subPath, 0, $lastPos); + $search = $subPath . '\\'; + if (isset($this->prefixDirsPsr4[$search])) { + $pathEnd = DIRECTORY_SEPARATOR . substr($logicalPathPsr4, $lastPos + 1); + foreach ($this->prefixDirsPsr4[$search] as $dir) { + if (file_exists($file = $dir . $pathEnd)) { + return $file; + } + } + } + } + } + + // PSR-4 fallback dirs + foreach ($this->fallbackDirsPsr4 as $dir) { + if (file_exists($file = $dir . DIRECTORY_SEPARATOR . $logicalPathPsr4)) { + return $file; + } + } + + // PSR-0 lookup + if (false !== $pos = strrpos($class, '\\')) { + // namespaced class name + $logicalPathPsr0 = substr($logicalPathPsr4, 0, $pos + 1) + . strtr(substr($logicalPathPsr4, $pos + 1), '_', DIRECTORY_SEPARATOR); + } else { + // PEAR-like class name + $logicalPathPsr0 = strtr($class, '_', DIRECTORY_SEPARATOR) . $ext; + } + + if (isset($this->prefixesPsr0[$first])) { + foreach ($this->prefixesPsr0[$first] as $prefix => $dirs) { + if (0 === strpos($class, $prefix)) { + foreach ($dirs as $dir) { + if (file_exists($file = $dir . DIRECTORY_SEPARATOR . $logicalPathPsr0)) { + return $file; + } + } + } + } + } + + // PSR-0 fallback dirs + foreach ($this->fallbackDirsPsr0 as $dir) { + if (file_exists($file = $dir . DIRECTORY_SEPARATOR . $logicalPathPsr0)) { + return $file; + } + } + + // PSR-0 include paths. + if ($this->useIncludePath && $file = stream_resolve_include_path($logicalPathPsr0)) { + return $file; + } + + return false; + } +} + +/** + * Scope isolated include. + * + * Prevents access to $this/self from included files. + */ +function includeFile($file) +{ + include $file; +} diff --git a/vendor/composer/LICENSE b/vendor/composer/LICENSE new file mode 100644 index 00000000..f27399a0 --- /dev/null +++ b/vendor/composer/LICENSE @@ -0,0 +1,21 @@ + +Copyright (c) Nils Adermann, Jordi Boggiano + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is furnished +to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +THE SOFTWARE. + diff --git a/vendor/composer/autoload_classmap.php b/vendor/composer/autoload_classmap.php new file mode 100644 index 00000000..7a91153b --- /dev/null +++ b/vendor/composer/autoload_classmap.php @@ -0,0 +1,9 @@ + $vendorDir . '/ralouphie/getallheaders/src/getallheaders.php', + 'c964ee0ededf28c96ebd9db5099ef910' => $vendorDir . '/guzzlehttp/promises/src/functions_include.php', + 'a0edc8309cc5e1d60e3047b5df6b7052' => $vendorDir . '/guzzlehttp/psr7/src/functions_include.php', + '320cde22f66dd4f5d3fd621d3e88b98f' => $vendorDir . '/symfony/polyfill-ctype/bootstrap.php', + '37a3dc5111fe8f707ab4c132ef1dbc62' => $vendorDir . '/guzzlehttp/guzzle/src/functions_include.php', + 'f5df59ef04e89a509333d52505b5236d' => $baseDir . '/app/helpers.php', +); diff --git a/vendor/composer/autoload_namespaces.php b/vendor/composer/autoload_namespaces.php new file mode 100644 index 00000000..c3b982ee --- /dev/null +++ b/vendor/composer/autoload_namespaces.php @@ -0,0 +1,10 @@ + array($vendorDir . '/kevinlebrun/colors.php/src'), +); diff --git a/vendor/composer/autoload_psr4.php b/vendor/composer/autoload_psr4.php new file mode 100644 index 00000000..b09a19e7 --- /dev/null +++ b/vendor/composer/autoload_psr4.php @@ -0,0 +1,24 @@ + array($vendorDir . '/symfony/polyfill-ctype'), + 'Psr\\Log\\' => array($vendorDir . '/psr/log/Psr/Log'), + 'Psr\\Http\\Message\\' => array($vendorDir . '/psr/http-message/src'), + 'Predis\\' => array($vendorDir . '/predis/predis/src'), + 'PhpOption\\' => array($vendorDir . '/phpoption/phpoption/src/PhpOption'), + 'PHPMailer\\PHPMailer\\' => array($vendorDir . '/phpmailer/phpmailer/src'), + 'Monolog\\' => array($vendorDir . '/monolog/monolog/src/Monolog'), + 'Luolongfei\\Lib\\' => array($baseDir . '/libs'), + 'Luolongfei\\App\\' => array($baseDir . '/app'), + 'GuzzleHttp\\Psr7\\' => array($vendorDir . '/guzzlehttp/psr7/src'), + 'GuzzleHttp\\Promise\\' => array($vendorDir . '/guzzlehttp/promises/src'), + 'GuzzleHttp\\' => array($vendorDir . '/guzzlehttp/guzzle/src'), + 'Dotenv\\' => array($vendorDir . '/vlucas/phpdotenv/src'), + 'Bramus\\Monolog\\' => array($vendorDir . '/bramus/monolog-colored-line-formatter/src'), + 'Bramus\\Ansi\\' => array($vendorDir . '/bramus/ansi-php/src'), +); diff --git a/vendor/composer/autoload_real.php b/vendor/composer/autoload_real.php new file mode 100644 index 00000000..c215e96e --- /dev/null +++ b/vendor/composer/autoload_real.php @@ -0,0 +1,70 @@ += 50600 && !defined('HHVM_VERSION') && (!function_exists('zend_loader_file_encoded') || !zend_loader_file_encoded()); + if ($useStaticLoader) { + require_once __DIR__ . '/autoload_static.php'; + + call_user_func(\Composer\Autoload\ComposerStaticInit99b73a665e0d2066a2cb8dd066883cba::getInitializer($loader)); + } else { + $map = require __DIR__ . '/autoload_namespaces.php'; + foreach ($map as $namespace => $path) { + $loader->set($namespace, $path); + } + + $map = require __DIR__ . '/autoload_psr4.php'; + foreach ($map as $namespace => $path) { + $loader->setPsr4($namespace, $path); + } + + $classMap = require __DIR__ . '/autoload_classmap.php'; + if ($classMap) { + $loader->addClassMap($classMap); + } + } + + $loader->register(true); + + if ($useStaticLoader) { + $includeFiles = Composer\Autoload\ComposerStaticInit99b73a665e0d2066a2cb8dd066883cba::$files; + } else { + $includeFiles = require __DIR__ . '/autoload_files.php'; + } + foreach ($includeFiles as $fileIdentifier => $file) { + composerRequire99b73a665e0d2066a2cb8dd066883cba($fileIdentifier, $file); + } + + return $loader; + } +} + +function composerRequire99b73a665e0d2066a2cb8dd066883cba($fileIdentifier, $file) +{ + if (empty($GLOBALS['__composer_autoload_files'][$fileIdentifier])) { + require $file; + + $GLOBALS['__composer_autoload_files'][$fileIdentifier] = true; + } +} diff --git a/vendor/composer/autoload_static.php b/vendor/composer/autoload_static.php new file mode 100644 index 00000000..082e1acf --- /dev/null +++ b/vendor/composer/autoload_static.php @@ -0,0 +1,139 @@ + __DIR__ . '/..' . '/ralouphie/getallheaders/src/getallheaders.php', + 'c964ee0ededf28c96ebd9db5099ef910' => __DIR__ . '/..' . '/guzzlehttp/promises/src/functions_include.php', + 'a0edc8309cc5e1d60e3047b5df6b7052' => __DIR__ . '/..' . '/guzzlehttp/psr7/src/functions_include.php', + '320cde22f66dd4f5d3fd621d3e88b98f' => __DIR__ . '/..' . '/symfony/polyfill-ctype/bootstrap.php', + '37a3dc5111fe8f707ab4c132ef1dbc62' => __DIR__ . '/..' . '/guzzlehttp/guzzle/src/functions_include.php', + 'f5df59ef04e89a509333d52505b5236d' => __DIR__ . '/../..' . '/app/helpers.php', + ); + + public static $prefixLengthsPsr4 = array ( + 'S' => + array ( + 'Symfony\\Polyfill\\Ctype\\' => 23, + ), + 'P' => + array ( + 'Psr\\Log\\' => 8, + 'Psr\\Http\\Message\\' => 17, + 'Predis\\' => 7, + 'PhpOption\\' => 10, + 'PHPMailer\\PHPMailer\\' => 20, + ), + 'M' => + array ( + 'Monolog\\' => 8, + ), + 'L' => + array ( + 'Luolongfei\\Lib\\' => 15, + 'Luolongfei\\App\\' => 15, + ), + 'G' => + array ( + 'GuzzleHttp\\Psr7\\' => 16, + 'GuzzleHttp\\Promise\\' => 19, + 'GuzzleHttp\\' => 11, + ), + 'D' => + array ( + 'Dotenv\\' => 7, + ), + 'B' => + array ( + 'Bramus\\Monolog\\' => 15, + 'Bramus\\Ansi\\' => 12, + ), + ); + + public static $prefixDirsPsr4 = array ( + 'Symfony\\Polyfill\\Ctype\\' => + array ( + 0 => __DIR__ . '/..' . '/symfony/polyfill-ctype', + ), + 'Psr\\Log\\' => + array ( + 0 => __DIR__ . '/..' . '/psr/log/Psr/Log', + ), + 'Psr\\Http\\Message\\' => + array ( + 0 => __DIR__ . '/..' . '/psr/http-message/src', + ), + 'Predis\\' => + array ( + 0 => __DIR__ . '/..' . '/predis/predis/src', + ), + 'PhpOption\\' => + array ( + 0 => __DIR__ . '/..' . '/phpoption/phpoption/src/PhpOption', + ), + 'PHPMailer\\PHPMailer\\' => + array ( + 0 => __DIR__ . '/..' . '/phpmailer/phpmailer/src', + ), + 'Monolog\\' => + array ( + 0 => __DIR__ . '/..' . '/monolog/monolog/src/Monolog', + ), + 'Luolongfei\\Lib\\' => + array ( + 0 => __DIR__ . '/../..' . '/libs', + ), + 'Luolongfei\\App\\' => + array ( + 0 => __DIR__ . '/../..' . '/app', + ), + 'GuzzleHttp\\Psr7\\' => + array ( + 0 => __DIR__ . '/..' . '/guzzlehttp/psr7/src', + ), + 'GuzzleHttp\\Promise\\' => + array ( + 0 => __DIR__ . '/..' . '/guzzlehttp/promises/src', + ), + 'GuzzleHttp\\' => + array ( + 0 => __DIR__ . '/..' . '/guzzlehttp/guzzle/src', + ), + 'Dotenv\\' => + array ( + 0 => __DIR__ . '/..' . '/vlucas/phpdotenv/src', + ), + 'Bramus\\Monolog\\' => + array ( + 0 => __DIR__ . '/..' . '/bramus/monolog-colored-line-formatter/src', + ), + 'Bramus\\Ansi\\' => + array ( + 0 => __DIR__ . '/..' . '/bramus/ansi-php/src', + ), + ); + + public static $prefixesPsr0 = array ( + 'C' => + array ( + 'Colors' => + array ( + 0 => __DIR__ . '/..' . '/kevinlebrun/colors.php/src', + ), + ), + ); + + public static function getInitializer(ClassLoader $loader) + { + return \Closure::bind(function () use ($loader) { + $loader->prefixLengthsPsr4 = ComposerStaticInit99b73a665e0d2066a2cb8dd066883cba::$prefixLengthsPsr4; + $loader->prefixDirsPsr4 = ComposerStaticInit99b73a665e0d2066a2cb8dd066883cba::$prefixDirsPsr4; + $loader->prefixesPsr0 = ComposerStaticInit99b73a665e0d2066a2cb8dd066883cba::$prefixesPsr0; + + }, null, ClassLoader::class); + } +} diff --git a/vendor/composer/installed.json b/vendor/composer/installed.json new file mode 100644 index 00000000..064a6082 --- /dev/null +++ b/vendor/composer/installed.json @@ -0,0 +1,941 @@ +[ + { + "name": "bramus/ansi-php", + "version": "3.0.3", + "version_normalized": "3.0.3.0", + "source": { + "type": "git", + "url": "https://github.com/bramus/ansi-php.git", + "reference": "fb0be33f36053af7454d462e3ddc0a2ac0b2f311" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/bramus/ansi-php/zipball/fb0be33f36053af7454d462e3ddc0a2ac0b2f311", + "reference": "fb0be33f36053af7454d462e3ddc0a2ac0b2f311", + "shasum": "", + "mirrors": [ + { + "url": "https://mirrors.aliyun.com/composer/dists/%package%/%reference%.%type%", + "preferred": true + } + ] + }, + "require": { + "php": ">=5.4.0" + }, + "require-dev": { + "phpunit/phpunit": "~4.0" + }, + "time": "2019-12-03T09:04:38+00:00", + "type": "library", + "installation-source": "dist", + "autoload": { + "psr-4": { + "Bramus\\Ansi\\": "src/" + } + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Bramus Van Damme", + "email": "bramus@bram.us", + "homepage": "https://www.bram.us/" + } + ], + "description": "ANSI Control Functions and ANSI Control Sequences (Colors, Erasing, etc.) for PHP CLI Apps" + }, + { + "name": "bramus/monolog-colored-line-formatter", + "version": "2.0.3", + "version_normalized": "2.0.3.0", + "source": { + "type": "git", + "url": "https://github.com/bramus/monolog-colored-line-formatter.git", + "reference": "6bff15eee00afe2690642535b0f1541f10852c2b" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/bramus/monolog-colored-line-formatter/zipball/6bff15eee00afe2690642535b0f1541f10852c2b", + "reference": "6bff15eee00afe2690642535b0f1541f10852c2b", + "shasum": "", + "mirrors": [ + { + "url": "https://mirrors.aliyun.com/composer/dists/%package%/%reference%.%type%", + "preferred": true + } + ] + }, + "require": { + "bramus/ansi-php": "~3.0", + "php": ">=5.4.0" + }, + "require-dev": { + "monolog/monolog": "~1.0", + "phpunit/phpunit": "~4.0" + }, + "time": "2015-01-07T22:12:35+00:00", + "type": "library", + "installation-source": "dist", + "autoload": { + "psr-4": { + "Bramus\\Monolog\\": "src/" + } + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Bramus Van Damme", + "email": "bramus@bram.us", + "homepage": "https://www.bram.us/" + } + ], + "description": "Colored Line Formatter for Monolog" + }, + { + "name": "guzzlehttp/guzzle", + "version": "6.5.2", + "version_normalized": "6.5.2.0", + "source": { + "type": "git", + "url": "https://github.com/guzzle/guzzle.git", + "reference": "43ece0e75098b7ecd8d13918293029e555a50f82" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/guzzle/guzzle/zipball/43ece0e75098b7ecd8d13918293029e555a50f82", + "reference": "43ece0e75098b7ecd8d13918293029e555a50f82", + "shasum": "", + "mirrors": [ + { + "url": "https://mirrors.aliyun.com/composer/dists/%package%/%reference%.%type%", + "preferred": true + } + ] + }, + "require": { + "ext-json": "*", + "guzzlehttp/promises": "^1.0", + "guzzlehttp/psr7": "^1.6.1", + "php": ">=5.5" + }, + "require-dev": { + "ext-curl": "*", + "phpunit/phpunit": "^4.8.35 || ^5.7 || ^6.4 || ^7.0", + "psr/log": "^1.1" + }, + "suggest": { + "ext-intl": "Required for Internationalized Domain Name (IDN) support", + "psr/log": "Required for using the Log middleware" + }, + "time": "2019-12-23T11:57:10+00:00", + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "6.5-dev" + } + }, + "installation-source": "dist", + "autoload": { + "psr-4": { + "GuzzleHttp\\": "src/" + }, + "files": [ + "src/functions_include.php" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Michael Dowling", + "email": "mtdowling@gmail.com", + "homepage": "https://github.com/mtdowling" + } + ], + "description": "Guzzle is a PHP HTTP client library", + "homepage": "http://guzzlephp.org/", + "keywords": [ + "client", + "curl", + "framework", + "http", + "http client", + "rest", + "web service" + ] + }, + { + "name": "guzzlehttp/promises", + "version": "v1.3.1", + "version_normalized": "1.3.1.0", + "source": { + "type": "git", + "url": "https://github.com/guzzle/promises.git", + "reference": "a59da6cf61d80060647ff4d3eb2c03a2bc694646" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/guzzle/promises/zipball/a59da6cf61d80060647ff4d3eb2c03a2bc694646", + "reference": "a59da6cf61d80060647ff4d3eb2c03a2bc694646", + "shasum": "", + "mirrors": [ + { + "url": "https://mirrors.aliyun.com/composer/dists/%package%/%reference%.%type%", + "preferred": true + } + ] + }, + "require": { + "php": ">=5.5.0" + }, + "require-dev": { + "phpunit/phpunit": "^4.0" + }, + "time": "2016-12-20T10:07:11+00:00", + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.4-dev" + } + }, + "installation-source": "dist", + "autoload": { + "psr-4": { + "GuzzleHttp\\Promise\\": "src/" + }, + "files": [ + "src/functions_include.php" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Michael Dowling", + "email": "mtdowling@gmail.com", + "homepage": "https://github.com/mtdowling" + } + ], + "description": "Guzzle promises library", + "keywords": [ + "promise" + ] + }, + { + "name": "guzzlehttp/psr7", + "version": "1.6.1", + "version_normalized": "1.6.1.0", + "source": { + "type": "git", + "url": "https://github.com/guzzle/psr7.git", + "reference": "239400de7a173fe9901b9ac7c06497751f00727a" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/guzzle/psr7/zipball/239400de7a173fe9901b9ac7c06497751f00727a", + "reference": "239400de7a173fe9901b9ac7c06497751f00727a", + "shasum": "", + "mirrors": [ + { + "url": "https://mirrors.aliyun.com/composer/dists/%package%/%reference%.%type%", + "preferred": true + } + ] + }, + "require": { + "php": ">=5.4.0", + "psr/http-message": "~1.0", + "ralouphie/getallheaders": "^2.0.5 || ^3.0.0" + }, + "provide": { + "psr/http-message-implementation": "1.0" + }, + "require-dev": { + "ext-zlib": "*", + "phpunit/phpunit": "~4.8.36 || ^5.7.27 || ^6.5.8" + }, + "suggest": { + "zendframework/zend-httphandlerrunner": "Emit PSR-7 responses" + }, + "time": "2019-07-01T23:21:34+00:00", + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.6-dev" + } + }, + "installation-source": "dist", + "autoload": { + "psr-4": { + "GuzzleHttp\\Psr7\\": "src/" + }, + "files": [ + "src/functions_include.php" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Michael Dowling", + "email": "mtdowling@gmail.com", + "homepage": "https://github.com/mtdowling" + }, + { + "name": "Tobias Schultze", + "homepage": "https://github.com/Tobion" + } + ], + "description": "PSR-7 message implementation that also provides common utility methods", + "keywords": [ + "http", + "message", + "psr-7", + "request", + "response", + "stream", + "uri", + "url" + ] + }, + { + "name": "kevinlebrun/colors.php", + "version": "1.0.3", + "version_normalized": "1.0.3.0", + "source": { + "type": "git", + "url": "https://github.com/kevinlebrun/colors.php.git", + "reference": "cdda5eee41314b87cd5a8bb91b1ffc7c0210e673" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/kevinlebrun/colors.php/zipball/cdda5eee41314b87cd5a8bb91b1ffc7c0210e673", + "reference": "cdda5eee41314b87cd5a8bb91b1ffc7c0210e673", + "shasum": "", + "mirrors": [ + { + "url": "https://mirrors.aliyun.com/composer/dists/%package%/%reference%.%type%", + "preferred": true + } + ] + }, + "require": { + "php": ">=5.3.0" + }, + "require-dev": { + "phpunit/phpunit": "3.7.*", + "satooshi/php-coveralls": "1.0.*", + "squizlabs/php_codesniffer": "1.*" + }, + "time": "2018-05-30T08:34:23+00:00", + "type": "library", + "installation-source": "dist", + "autoload": { + "psr-0": { + "Colors": "src/" + } + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Kevin Le Brun", + "email": "lebrun.k@gmail.com", + "homepage": "http://kevinlebrun.fr", + "role": "developer" + } + ], + "description": "Colors for PHP CLI scripts", + "homepage": "https://github.com/kevinlebrun/colors.php", + "keywords": [ + "cli", + "color", + "colors", + "console", + "shell" + ] + }, + { + "name": "monolog/monolog", + "version": "1.25.3", + "version_normalized": "1.25.3.0", + "source": { + "type": "git", + "url": "https://github.com/Seldaek/monolog.git", + "reference": "fa82921994db851a8becaf3787a9e73c5976b6f1" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/Seldaek/monolog/zipball/fa82921994db851a8becaf3787a9e73c5976b6f1", + "reference": "fa82921994db851a8becaf3787a9e73c5976b6f1", + "shasum": "", + "mirrors": [ + { + "url": "https://mirrors.aliyun.com/composer/dists/%package%/%reference%.%type%", + "preferred": true + } + ] + }, + "require": { + "php": ">=5.3.0", + "psr/log": "~1.0" + }, + "provide": { + "psr/log-implementation": "1.0.0" + }, + "require-dev": { + "aws/aws-sdk-php": "^2.4.9 || ^3.0", + "doctrine/couchdb": "~1.0@dev", + "graylog2/gelf-php": "~1.0", + "jakub-onderka/php-parallel-lint": "0.9", + "php-amqplib/php-amqplib": "~2.4", + "php-console/php-console": "^3.1.3", + "phpunit/phpunit": "~4.5", + "phpunit/phpunit-mock-objects": "2.3.0", + "ruflin/elastica": ">=0.90 <3.0", + "sentry/sentry": "^0.13", + "swiftmailer/swiftmailer": "^5.3|^6.0" + }, + "suggest": { + "aws/aws-sdk-php": "Allow sending log messages to AWS services like DynamoDB", + "doctrine/couchdb": "Allow sending log messages to a CouchDB server", + "ext-amqp": "Allow sending log messages to an AMQP server (1.0+ required)", + "ext-mongo": "Allow sending log messages to a MongoDB server", + "graylog2/gelf-php": "Allow sending log messages to a GrayLog2 server", + "mongodb/mongodb": "Allow sending log messages to a MongoDB server via PHP Driver", + "php-amqplib/php-amqplib": "Allow sending log messages to an AMQP server using php-amqplib", + "php-console/php-console": "Allow sending log messages to Google Chrome", + "rollbar/rollbar": "Allow sending log messages to Rollbar", + "ruflin/elastica": "Allow sending log messages to an Elastic Search server", + "sentry/sentry": "Allow sending log messages to a Sentry server" + }, + "time": "2019-12-20T14:15:16+00:00", + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "2.0.x-dev" + } + }, + "installation-source": "dist", + "autoload": { + "psr-4": { + "Monolog\\": "src/Monolog" + } + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Jordi Boggiano", + "email": "j.boggiano@seld.be", + "homepage": "http://seld.be" + } + ], + "description": "Sends your logs to files, sockets, inboxes, databases and various web services", + "homepage": "http://github.com/Seldaek/monolog", + "keywords": [ + "log", + "logging", + "psr-3" + ] + }, + { + "name": "phpmailer/phpmailer", + "version": "v6.1.4", + "version_normalized": "6.1.4.0", + "source": { + "type": "git", + "url": "https://github.com/PHPMailer/PHPMailer.git", + "reference": "c5e61d0729507049cec9673aa1a679f9adefd683" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/PHPMailer/PHPMailer/zipball/c5e61d0729507049cec9673aa1a679f9adefd683", + "reference": "c5e61d0729507049cec9673aa1a679f9adefd683", + "shasum": "", + "mirrors": [ + { + "url": "https://mirrors.aliyun.com/composer/dists/%package%/%reference%.%type%", + "preferred": true + } + ] + }, + "require": { + "ext-ctype": "*", + "ext-filter": "*", + "php": ">=5.5.0" + }, + "require-dev": { + "doctrine/annotations": "^1.2", + "friendsofphp/php-cs-fixer": "^2.2", + "phpunit/phpunit": "^4.8 || ^5.7" + }, + "suggest": { + "ext-mbstring": "Needed to send email in multibyte encoding charset", + "hayageek/oauth2-yahoo": "Needed for Yahoo XOAUTH2 authentication", + "league/oauth2-google": "Needed for Google XOAUTH2 authentication", + "psr/log": "For optional PSR-3 debug logging", + "stevenmaguire/oauth2-microsoft": "Needed for Microsoft XOAUTH2 authentication", + "symfony/polyfill-mbstring": "To support UTF-8 if the Mbstring PHP extension is not enabled (^1.2)" + }, + "time": "2019-12-10T11:17:38+00:00", + "type": "library", + "installation-source": "dist", + "autoload": { + "psr-4": { + "PHPMailer\\PHPMailer\\": "src/" + } + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "LGPL-2.1-only" + ], + "authors": [ + { + "name": "Marcus Bointon", + "email": "phpmailer@synchromedia.co.uk" + }, + { + "name": "Jim Jagielski", + "email": "jimjag@gmail.com" + }, + { + "name": "Andy Prevost", + "email": "codeworxtech@users.sourceforge.net" + }, + { + "name": "Brent R. Matzelle" + } + ], + "description": "PHPMailer is a full-featured email creation and transfer class for PHP" + }, + { + "name": "phpoption/phpoption", + "version": "1.7.2", + "version_normalized": "1.7.2.0", + "source": { + "type": "git", + "url": "https://github.com/schmittjoh/php-option.git", + "reference": "77f7c4d2e65413aff5b5a8cc8b3caf7a28d81959" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/schmittjoh/php-option/zipball/77f7c4d2e65413aff5b5a8cc8b3caf7a28d81959", + "reference": "77f7c4d2e65413aff5b5a8cc8b3caf7a28d81959", + "shasum": "", + "mirrors": [ + { + "url": "https://mirrors.aliyun.com/composer/dists/%package%/%reference%.%type%", + "preferred": true + } + ] + }, + "require": { + "php": "^5.5.9 || ^7.0" + }, + "require-dev": { + "bamarni/composer-bin-plugin": "^1.3", + "phpunit/phpunit": "^4.8.35 || ^5.0 || ^6.0 || ^7.0" + }, + "time": "2019-12-15T19:35:24+00:00", + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.7-dev" + } + }, + "installation-source": "dist", + "autoload": { + "psr-4": { + "PhpOption\\": "src/PhpOption/" + } + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "Apache-2.0" + ], + "authors": [ + { + "name": "Johannes M. Schmitt", + "email": "schmittjoh@gmail.com" + }, + { + "name": "Graham Campbell", + "email": "graham@alt-three.com" + } + ], + "description": "Option Type for PHP", + "keywords": [ + "language", + "option", + "php", + "type" + ] + }, + { + "name": "predis/predis", + "version": "v1.1.1", + "version_normalized": "1.1.1.0", + "source": { + "type": "git", + "url": "https://github.com/nrk/predis.git", + "reference": "f0210e38881631afeafb56ab43405a92cafd9fd1" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/nrk/predis/zipball/f0210e38881631afeafb56ab43405a92cafd9fd1", + "reference": "f0210e38881631afeafb56ab43405a92cafd9fd1", + "shasum": "", + "mirrors": [ + { + "url": "https://mirrors.aliyun.com/composer/dists/%package%/%reference%.%type%", + "preferred": true + } + ] + }, + "require": { + "php": ">=5.3.9" + }, + "require-dev": { + "phpunit/phpunit": "~4.8" + }, + "suggest": { + "ext-curl": "Allows access to Webdis when paired with phpiredis", + "ext-phpiredis": "Allows faster serialization and deserialization of the Redis protocol" + }, + "time": "2016-06-16T16:22:20+00:00", + "type": "library", + "installation-source": "dist", + "autoload": { + "psr-4": { + "Predis\\": "src/" + } + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Daniele Alessandri", + "email": "suppakilla@gmail.com", + "homepage": "http://clorophilla.net" + } + ], + "description": "Flexible and feature-complete Redis client for PHP and HHVM", + "homepage": "http://github.com/nrk/predis", + "keywords": [ + "nosql", + "predis", + "redis" + ] + }, + { + "name": "psr/http-message", + "version": "1.0.1", + "version_normalized": "1.0.1.0", + "source": { + "type": "git", + "url": "https://github.com/php-fig/http-message.git", + "reference": "f6561bf28d520154e4b0ec72be95418abe6d9363" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/php-fig/http-message/zipball/f6561bf28d520154e4b0ec72be95418abe6d9363", + "reference": "f6561bf28d520154e4b0ec72be95418abe6d9363", + "shasum": "", + "mirrors": [ + { + "url": "https://mirrors.aliyun.com/composer/dists/%package%/%reference%.%type%", + "preferred": true + } + ] + }, + "require": { + "php": ">=5.3.0" + }, + "time": "2016-08-06T14:39:51+00:00", + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.0.x-dev" + } + }, + "installation-source": "dist", + "autoload": { + "psr-4": { + "Psr\\Http\\Message\\": "src/" + } + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "PHP-FIG", + "homepage": "http://www.php-fig.org/" + } + ], + "description": "Common interface for HTTP messages", + "homepage": "https://github.com/php-fig/http-message", + "keywords": [ + "http", + "http-message", + "psr", + "psr-7", + "request", + "response" + ] + }, + { + "name": "psr/log", + "version": "1.1.2", + "version_normalized": "1.1.2.0", + "source": { + "type": "git", + "url": "https://github.com/php-fig/log.git", + "reference": "446d54b4cb6bf489fc9d75f55843658e6f25d801" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/php-fig/log/zipball/446d54b4cb6bf489fc9d75f55843658e6f25d801", + "reference": "446d54b4cb6bf489fc9d75f55843658e6f25d801", + "shasum": "", + "mirrors": [ + { + "url": "https://mirrors.aliyun.com/composer/dists/%package%/%reference%.%type%", + "preferred": true + } + ] + }, + "require": { + "php": ">=5.3.0" + }, + "time": "2019-11-01T11:05:21+00:00", + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.1.x-dev" + } + }, + "installation-source": "dist", + "autoload": { + "psr-4": { + "Psr\\Log\\": "Psr/Log/" + } + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "PHP-FIG", + "homepage": "http://www.php-fig.org/" + } + ], + "description": "Common interface for logging libraries", + "homepage": "https://github.com/php-fig/log", + "keywords": [ + "log", + "psr", + "psr-3" + ] + }, + { + "name": "ralouphie/getallheaders", + "version": "3.0.3", + "version_normalized": "3.0.3.0", + "source": { + "type": "git", + "url": "https://github.com/ralouphie/getallheaders.git", + "reference": "120b605dfeb996808c31b6477290a714d356e822" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/ralouphie/getallheaders/zipball/120b605dfeb996808c31b6477290a714d356e822", + "reference": "120b605dfeb996808c31b6477290a714d356e822", + "shasum": "", + "mirrors": [ + { + "url": "https://mirrors.aliyun.com/composer/dists/%package%/%reference%.%type%", + "preferred": true + } + ] + }, + "require": { + "php": ">=5.6" + }, + "require-dev": { + "php-coveralls/php-coveralls": "^2.1", + "phpunit/phpunit": "^5 || ^6.5" + }, + "time": "2019-03-08T08:55:37+00:00", + "type": "library", + "installation-source": "dist", + "autoload": { + "files": [ + "src/getallheaders.php" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Ralph Khattar", + "email": "ralph.khattar@gmail.com" + } + ], + "description": "A polyfill for getallheaders." + }, + { + "name": "symfony/polyfill-ctype", + "version": "v1.13.1", + "version_normalized": "1.13.1.0", + "source": { + "type": "git", + "url": "https://github.com/symfony/polyfill-ctype.git", + "reference": "f8f0b461be3385e56d6de3dbb5a0df24c0c275e3" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/symfony/polyfill-ctype/zipball/f8f0b461be3385e56d6de3dbb5a0df24c0c275e3", + "reference": "f8f0b461be3385e56d6de3dbb5a0df24c0c275e3", + "shasum": "", + "mirrors": [ + { + "url": "https://mirrors.aliyun.com/composer/dists/%package%/%reference%.%type%", + "preferred": true + } + ] + }, + "require": { + "php": ">=5.3.3" + }, + "suggest": { + "ext-ctype": "For best performance" + }, + "time": "2019-11-27T13:56:44+00:00", + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "1.13-dev" + } + }, + "installation-source": "dist", + "autoload": { + "psr-4": { + "Symfony\\Polyfill\\Ctype\\": "" + }, + "files": [ + "bootstrap.php" + ] + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "MIT" + ], + "authors": [ + { + "name": "Gert de Pagter", + "email": "BackEndTea@gmail.com" + }, + { + "name": "Symfony Community", + "homepage": "https://symfony.com/contributors" + } + ], + "description": "Symfony polyfill for ctype functions", + "homepage": "https://symfony.com", + "keywords": [ + "compatibility", + "ctype", + "polyfill", + "portable" + ] + }, + { + "name": "vlucas/phpdotenv", + "version": "v3.6.0", + "version_normalized": "3.6.0.0", + "source": { + "type": "git", + "url": "https://github.com/vlucas/phpdotenv.git", + "reference": "1bdf24f065975594f6a117f0f1f6cabf1333b156" + }, + "dist": { + "type": "zip", + "url": "https://api.github.com/repos/vlucas/phpdotenv/zipball/1bdf24f065975594f6a117f0f1f6cabf1333b156", + "reference": "1bdf24f065975594f6a117f0f1f6cabf1333b156", + "shasum": "", + "mirrors": [ + { + "url": "https://mirrors.aliyun.com/composer/dists/%package%/%reference%.%type%", + "preferred": true + } + ] + }, + "require": { + "php": "^5.4 || ^7.0", + "phpoption/phpoption": "^1.5", + "symfony/polyfill-ctype": "^1.9" + }, + "require-dev": { + "phpunit/phpunit": "^4.8.35 || ^5.0 || ^6.0 || ^7.0" + }, + "time": "2019-09-10T21:37:39+00:00", + "type": "library", + "extra": { + "branch-alias": { + "dev-master": "3.6-dev" + } + }, + "installation-source": "dist", + "autoload": { + "psr-4": { + "Dotenv\\": "src/" + } + }, + "notification-url": "https://packagist.org/downloads/", + "license": [ + "BSD-3-Clause" + ], + "authors": [ + { + "name": "Graham Campbell", + "email": "graham@alt-three.com", + "homepage": "https://gjcampbell.co.uk/" + }, + { + "name": "Vance Lucas", + "email": "vance@vancelucas.com", + "homepage": "https://vancelucas.com/" + } + ], + "description": "Loads environment variables from `.env` to `getenv()`, `$_ENV` and `$_SERVER` automagically.", + "keywords": [ + "dotenv", + "env", + "environment" + ] + } +] diff --git a/vendor/guzzlehttp/guzzle/.php_cs b/vendor/guzzlehttp/guzzle/.php_cs new file mode 100644 index 00000000..945724bf --- /dev/null +++ b/vendor/guzzlehttp/guzzle/.php_cs @@ -0,0 +1,23 @@ +setRiskyAllowed(true) + ->setRules([ + '@PSR2' => true, + 'array_syntax' => ['syntax' => 'short'], + 'declare_strict_types' => false, + 'concat_space' => ['spacing'=>'one'], + 'php_unit_test_case_static_method_calls' => ['call_type' => 'self'], + 'ordered_imports' => true, + // 'phpdoc_align' => ['align'=>'vertical'], + // 'native_function_invocation' => true, + ]) + ->setFinder( + PhpCsFixer\Finder::create() + ->in(__DIR__.'/src') + ->in(__DIR__.'/tests') + ->name('*.php') + ) +; + +return $config; diff --git a/vendor/guzzlehttp/guzzle/CHANGELOG.md b/vendor/guzzlehttp/guzzle/CHANGELOG.md new file mode 100644 index 00000000..f8fda914 --- /dev/null +++ b/vendor/guzzlehttp/guzzle/CHANGELOG.md @@ -0,0 +1,1322 @@ +# Change Log + +## 6.5.2 - 2019-12-23 + +* idn_to_ascii() fix for old PHP versions [#2489](https://github.com/guzzle/guzzle/pull/2489) + +## 6.5.1 - 2019-12-21 + +* Better defaults for PHP installations with old ICU lib [#2454](https://github.com/guzzle/guzzle/pull/2454) +* IDN support for redirects [#2424](https://github.com/guzzle/guzzle/pull/2424) + +## 6.5.0 - 2019-12-07 + +* Improvement: Added support for reset internal queue in MockHandler. [#2143](https://github.com/guzzle/guzzle/pull/2143) +* Improvement: Added support to pass arbitrary options to `curl_multi_init`. [#2287](https://github.com/guzzle/guzzle/pull/2287) +* Fix: Gracefully handle passing `null` to the `header` option. [#2132](https://github.com/guzzle/guzzle/pull/2132) +* Fix: `RetryMiddleware` did not do exponential delay between retires due unit mismatch. [#2132](https://github.com/guzzle/guzzle/pull/2132) +* Fix: Prevent undefined offset when using array for ssl_key options. [#2348](https://github.com/guzzle/guzzle/pull/2348) +* Deprecated `ClientInterface::VERSION` + +## 6.4.1 - 2019-10-23 + +* No `guzzle.phar` was created in 6.4.0 due expired API token. This release will fix that +* Added `parent::__construct()` to `FileCookieJar` and `SessionCookieJar` + +## 6.4.0 - 2019-10-23 + +* Improvement: Improved error messages when using curl < 7.21.2 [#2108](https://github.com/guzzle/guzzle/pull/2108) +* Fix: Test if response is readable before returning a summary in `RequestException::getResponseBodySummary()` [#2081](https://github.com/guzzle/guzzle/pull/2081) +* Fix: Add support for GUZZLE_CURL_SELECT_TIMEOUT environment variable [#2161](https://github.com/guzzle/guzzle/pull/2161) +* Improvement: Added `GuzzleHttp\Exception\InvalidArgumentException` [#2163](https://github.com/guzzle/guzzle/pull/2163) +* Improvement: Added `GuzzleHttp\_current_time()` to use `hrtime()` if that function exists. [#2242](https://github.com/guzzle/guzzle/pull/2242) +* Improvement: Added curl's `appconnect_time` in `TransferStats` [#2284](https://github.com/guzzle/guzzle/pull/2284) +* Improvement: Make GuzzleException extend Throwable wherever it's available [#2273](https://github.com/guzzle/guzzle/pull/2273) +* Fix: Prevent concurrent writes to file when saving `CookieJar` [#2335](https://github.com/guzzle/guzzle/pull/2335) +* Improvement: Update `MockHandler` so we can test transfer time [#2362](https://github.com/guzzle/guzzle/pull/2362) + +## 6.3.3 - 2018-04-22 + +* Fix: Default headers when decode_content is specified + + +## 6.3.2 - 2018-03-26 + +* Fix: Release process + + +## 6.3.1 - 2018-03-26 + +* Bug fix: Parsing 0 epoch expiry times in cookies [#2014](https://github.com/guzzle/guzzle/pull/2014) +* Improvement: Better ConnectException detection [#2012](https://github.com/guzzle/guzzle/pull/2012) +* Bug fix: Malformed domain that contains a "/" [#1999](https://github.com/guzzle/guzzle/pull/1999) +* Bug fix: Undefined offset when a cookie has no first key-value pair [#1998](https://github.com/guzzle/guzzle/pull/1998) +* Improvement: Support PHPUnit 6 [#1953](https://github.com/guzzle/guzzle/pull/1953) +* Bug fix: Support empty headers [#1915](https://github.com/guzzle/guzzle/pull/1915) +* Bug fix: Ignore case during header modifications [#1916](https://github.com/guzzle/guzzle/pull/1916) + ++ Minor code cleanups, documentation fixes and clarifications. + + +## 6.3.0 - 2017-06-22 + +* Feature: force IP resolution (ipv4 or ipv6) [#1608](https://github.com/guzzle/guzzle/pull/1608), [#1659](https://github.com/guzzle/guzzle/pull/1659) +* Improvement: Don't include summary in exception message when body is empty [#1621](https://github.com/guzzle/guzzle/pull/1621) +* Improvement: Handle `on_headers` option in MockHandler [#1580](https://github.com/guzzle/guzzle/pull/1580) +* Improvement: Added SUSE Linux CA path [#1609](https://github.com/guzzle/guzzle/issues/1609) +* Improvement: Use class reference for getting the name of the class instead of using hardcoded strings [#1641](https://github.com/guzzle/guzzle/pull/1641) +* Feature: Added `read_timeout` option [#1611](https://github.com/guzzle/guzzle/pull/1611) +* Bug fix: PHP 7.x fixes [#1685](https://github.com/guzzle/guzzle/pull/1685), [#1686](https://github.com/guzzle/guzzle/pull/1686), [#1811](https://github.com/guzzle/guzzle/pull/1811) +* Deprecation: BadResponseException instantiation without a response [#1642](https://github.com/guzzle/guzzle/pull/1642) +* Feature: Added NTLM auth [#1569](https://github.com/guzzle/guzzle/pull/1569) +* Feature: Track redirect HTTP status codes [#1711](https://github.com/guzzle/guzzle/pull/1711) +* Improvement: Check handler type during construction [#1745](https://github.com/guzzle/guzzle/pull/1745) +* Improvement: Always include the Content-Length if there's a body [#1721](https://github.com/guzzle/guzzle/pull/1721) +* Feature: Added convenience method to access a cookie by name [#1318](https://github.com/guzzle/guzzle/pull/1318) +* Bug fix: Fill `CURLOPT_CAPATH` and `CURLOPT_CAINFO` properly [#1684](https://github.com/guzzle/guzzle/pull/1684) +* Improvement: Use `\GuzzleHttp\Promise\rejection_for` function instead of object init [#1827](https://github.com/guzzle/guzzle/pull/1827) + + ++ Minor code cleanups, documentation fixes and clarifications. + +## 6.2.3 - 2017-02-28 + +* Fix deprecations with guzzle/psr7 version 1.4 + +## 6.2.2 - 2016-10-08 + +* Allow to pass nullable Response to delay callable +* Only add scheme when host is present +* Fix drain case where content-length is the literal string zero +* Obfuscate in-URL credentials in exceptions + +## 6.2.1 - 2016-07-18 + +* Address HTTP_PROXY security vulnerability, CVE-2016-5385: + https://httpoxy.org/ +* Fixing timeout bug with StreamHandler: + https://github.com/guzzle/guzzle/pull/1488 +* Only read up to `Content-Length` in PHP StreamHandler to avoid timeouts when + a server does not honor `Connection: close`. +* Ignore URI fragment when sending requests. + +## 6.2.0 - 2016-03-21 + +* Feature: added `GuzzleHttp\json_encode` and `GuzzleHttp\json_decode`. + https://github.com/guzzle/guzzle/pull/1389 +* Bug fix: Fix sleep calculation when waiting for delayed requests. + https://github.com/guzzle/guzzle/pull/1324 +* Feature: More flexible history containers. + https://github.com/guzzle/guzzle/pull/1373 +* Bug fix: defer sink stream opening in StreamHandler. + https://github.com/guzzle/guzzle/pull/1377 +* Bug fix: do not attempt to escape cookie values. + https://github.com/guzzle/guzzle/pull/1406 +* Feature: report original content encoding and length on decoded responses. + https://github.com/guzzle/guzzle/pull/1409 +* Bug fix: rewind seekable request bodies before dispatching to cURL. + https://github.com/guzzle/guzzle/pull/1422 +* Bug fix: provide an empty string to `http_build_query` for HHVM workaround. + https://github.com/guzzle/guzzle/pull/1367 + +## 6.1.1 - 2015-11-22 + +* Bug fix: Proxy::wrapSync() now correctly proxies to the appropriate handler + https://github.com/guzzle/guzzle/commit/911bcbc8b434adce64e223a6d1d14e9a8f63e4e4 +* Feature: HandlerStack is now more generic. + https://github.com/guzzle/guzzle/commit/f2102941331cda544745eedd97fc8fd46e1ee33e +* Bug fix: setting verify to false in the StreamHandler now disables peer + verification. https://github.com/guzzle/guzzle/issues/1256 +* Feature: Middleware now uses an exception factory, including more error + context. https://github.com/guzzle/guzzle/pull/1282 +* Feature: better support for disabled functions. + https://github.com/guzzle/guzzle/pull/1287 +* Bug fix: fixed regression where MockHandler was not using `sink`. + https://github.com/guzzle/guzzle/pull/1292 + +## 6.1.0 - 2015-09-08 + +* Feature: Added the `on_stats` request option to provide access to transfer + statistics for requests. https://github.com/guzzle/guzzle/pull/1202 +* Feature: Added the ability to persist session cookies in CookieJars. + https://github.com/guzzle/guzzle/pull/1195 +* Feature: Some compatibility updates for Google APP Engine + https://github.com/guzzle/guzzle/pull/1216 +* Feature: Added support for NO_PROXY to prevent the use of a proxy based on + a simple set of rules. https://github.com/guzzle/guzzle/pull/1197 +* Feature: Cookies can now contain square brackets. + https://github.com/guzzle/guzzle/pull/1237 +* Bug fix: Now correctly parsing `=` inside of quotes in Cookies. + https://github.com/guzzle/guzzle/pull/1232 +* Bug fix: Cusotm cURL options now correctly override curl options of the + same name. https://github.com/guzzle/guzzle/pull/1221 +* Bug fix: Content-Type header is now added when using an explicitly provided + multipart body. https://github.com/guzzle/guzzle/pull/1218 +* Bug fix: Now ignoring Set-Cookie headers that have no name. +* Bug fix: Reason phrase is no longer cast to an int in some cases in the + cURL handler. https://github.com/guzzle/guzzle/pull/1187 +* Bug fix: Remove the Authorization header when redirecting if the Host + header changes. https://github.com/guzzle/guzzle/pull/1207 +* Bug fix: Cookie path matching fixes + https://github.com/guzzle/guzzle/issues/1129 +* Bug fix: Fixing the cURL `body_as_string` setting + https://github.com/guzzle/guzzle/pull/1201 +* Bug fix: quotes are no longer stripped when parsing cookies. + https://github.com/guzzle/guzzle/issues/1172 +* Bug fix: `form_params` and `query` now always uses the `&` separator. + https://github.com/guzzle/guzzle/pull/1163 +* Bug fix: Adding a Content-Length to PHP stream wrapper requests if not set. + https://github.com/guzzle/guzzle/pull/1189 + +## 6.0.2 - 2015-07-04 + +* Fixed a memory leak in the curl handlers in which references to callbacks + were not being removed by `curl_reset`. +* Cookies are now extracted properly before redirects. +* Cookies now allow more character ranges. +* Decoded Content-Encoding responses are now modified to correctly reflect + their state if the encoding was automatically removed by a handler. This + means that the `Content-Encoding` header may be removed an the + `Content-Length` modified to reflect the message size after removing the + encoding. +* Added a more explicit error message when trying to use `form_params` and + `multipart` in the same request. +* Several fixes for HHVM support. +* Functions are now conditionally required using an additional level of + indirection to help with global Composer installations. + +## 6.0.1 - 2015-05-27 + +* Fixed a bug with serializing the `query` request option where the `&` + separator was missing. +* Added a better error message for when `body` is provided as an array. Please + use `form_params` or `multipart` instead. +* Various doc fixes. + +## 6.0.0 - 2015-05-26 + +* See the UPGRADING.md document for more information. +* Added `multipart` and `form_params` request options. +* Added `synchronous` request option. +* Added the `on_headers` request option. +* Fixed `expect` handling. +* No longer adding default middlewares in the client ctor. These need to be + present on the provided handler in order to work. +* Requests are no longer initiated when sending async requests with the + CurlMultiHandler. This prevents unexpected recursion from requests completing + while ticking the cURL loop. +* Removed the semantics of setting `default` to `true`. This is no longer + required now that the cURL loop is not ticked for async requests. +* Added request and response logging middleware. +* No longer allowing self signed certificates when using the StreamHandler. +* Ensuring that `sink` is valid if saving to a file. +* Request exceptions now include a "handler context" which provides handler + specific contextual information. +* Added `GuzzleHttp\RequestOptions` to allow request options to be applied + using constants. +* `$maxHandles` has been removed from CurlMultiHandler. +* `MultipartPostBody` is now part of the `guzzlehttp/psr7` package. + +## 5.3.0 - 2015-05-19 + +* Mock now supports `save_to` +* Marked `AbstractRequestEvent::getTransaction()` as public. +* Fixed a bug in which multiple headers using different casing would overwrite + previous headers in the associative array. +* Added `Utils::getDefaultHandler()` +* Marked `GuzzleHttp\Client::getDefaultUserAgent` as deprecated. +* URL scheme is now always lowercased. + +## 6.0.0-beta.1 + +* Requires PHP >= 5.5 +* Updated to use PSR-7 + * Requires immutable messages, which basically means an event based system + owned by a request instance is no longer possible. + * Utilizing the [Guzzle PSR-7 package](https://github.com/guzzle/psr7). + * Removed the dependency on `guzzlehttp/streams`. These stream abstractions + are available in the `guzzlehttp/psr7` package under the `GuzzleHttp\Psr7` + namespace. +* Added middleware and handler system + * Replaced the Guzzle event and subscriber system with a middleware system. + * No longer depends on RingPHP, but rather places the HTTP handlers directly + in Guzzle, operating on PSR-7 messages. + * Retry logic is now encapsulated in `GuzzleHttp\Middleware::retry`, which + means the `guzzlehttp/retry-subscriber` is now obsolete. + * Mocking responses is now handled using `GuzzleHttp\Handler\MockHandler`. +* Asynchronous responses + * No longer supports the `future` request option to send an async request. + Instead, use one of the `*Async` methods of a client (e.g., `requestAsync`, + `getAsync`, etc.). + * Utilizing `GuzzleHttp\Promise` instead of React's promise library to avoid + recursion required by chaining and forwarding react promises. See + https://github.com/guzzle/promises + * Added `requestAsync` and `sendAsync` to send request asynchronously. + * Added magic methods for `getAsync()`, `postAsync()`, etc. to send requests + asynchronously. +* Request options + * POST and form updates + * Added the `form_fields` and `form_files` request options. + * Removed the `GuzzleHttp\Post` namespace. + * The `body` request option no longer accepts an array for POST requests. + * The `exceptions` request option has been deprecated in favor of the + `http_errors` request options. + * The `save_to` request option has been deprecated in favor of `sink` request + option. +* Clients no longer accept an array of URI template string and variables for + URI variables. You will need to expand URI templates before passing them + into a client constructor or request method. +* Client methods `get()`, `post()`, `put()`, `patch()`, `options()`, etc. are + now magic methods that will send synchronous requests. +* Replaced `Utils.php` with plain functions in `functions.php`. +* Removed `GuzzleHttp\Collection`. +* Removed `GuzzleHttp\BatchResults`. Batched pool results are now returned as + an array. +* Removed `GuzzleHttp\Query`. Query string handling is now handled using an + associative array passed into the `query` request option. The query string + is serialized using PHP's `http_build_query`. If you need more control, you + can pass the query string in as a string. +* `GuzzleHttp\QueryParser` has been replaced with the + `GuzzleHttp\Psr7\parse_query`. + +## 5.2.0 - 2015-01-27 + +* Added `AppliesHeadersInterface` to make applying headers to a request based + on the body more generic and not specific to `PostBodyInterface`. +* Reduced the number of stack frames needed to send requests. +* Nested futures are now resolved in the client rather than the RequestFsm +* Finishing state transitions is now handled in the RequestFsm rather than the + RingBridge. +* Added a guard in the Pool class to not use recursion for request retries. + +## 5.1.0 - 2014-12-19 + +* Pool class no longer uses recursion when a request is intercepted. +* The size of a Pool can now be dynamically adjusted using a callback. + See https://github.com/guzzle/guzzle/pull/943. +* Setting a request option to `null` when creating a request with a client will + ensure that the option is not set. This allows you to overwrite default + request options on a per-request basis. + See https://github.com/guzzle/guzzle/pull/937. +* Added the ability to limit which protocols are allowed for redirects by + specifying a `protocols` array in the `allow_redirects` request option. +* Nested futures due to retries are now resolved when waiting for synchronous + responses. See https://github.com/guzzle/guzzle/pull/947. +* `"0"` is now an allowed URI path. See + https://github.com/guzzle/guzzle/pull/935. +* `Query` no longer typehints on the `$query` argument in the constructor, + allowing for strings and arrays. +* Exceptions thrown in the `end` event are now correctly wrapped with Guzzle + specific exceptions if necessary. + +## 5.0.3 - 2014-11-03 + +This change updates query strings so that they are treated as un-encoded values +by default where the value represents an un-encoded value to send over the +wire. A Query object then encodes the value before sending over the wire. This +means that even value query string values (e.g., ":") are url encoded. This +makes the Query class match PHP's http_build_query function. However, if you +want to send requests over the wire using valid query string characters that do +not need to be encoded, then you can provide a string to Url::setQuery() and +pass true as the second argument to specify that the query string is a raw +string that should not be parsed or encoded (unless a call to getQuery() is +subsequently made, forcing the query-string to be converted into a Query +object). + +## 5.0.2 - 2014-10-30 + +* Added a trailing `\r\n` to multipart/form-data payloads. See + https://github.com/guzzle/guzzle/pull/871 +* Added a `GuzzleHttp\Pool::send()` convenience method to match the docs. +* Status codes are now returned as integers. See + https://github.com/guzzle/guzzle/issues/881 +* No longer overwriting an existing `application/x-www-form-urlencoded` header + when sending POST requests, allowing for customized headers. See + https://github.com/guzzle/guzzle/issues/877 +* Improved path URL serialization. + + * No longer double percent-encoding characters in the path or query string if + they are already encoded. + * Now properly encoding the supplied path to a URL object, instead of only + encoding ' ' and '?'. + * Note: This has been changed in 5.0.3 to now encode query string values by + default unless the `rawString` argument is provided when setting the query + string on a URL: Now allowing many more characters to be present in the + query string without being percent encoded. See http://tools.ietf.org/html/rfc3986#appendix-A + +## 5.0.1 - 2014-10-16 + +Bugfix release. + +* Fixed an issue where connection errors still returned response object in + error and end events event though the response is unusable. This has been + corrected so that a response is not returned in the `getResponse` method of + these events if the response did not complete. https://github.com/guzzle/guzzle/issues/867 +* Fixed an issue where transfer statistics were not being populated in the + RingBridge. https://github.com/guzzle/guzzle/issues/866 + +## 5.0.0 - 2014-10-12 + +Adding support for non-blocking responses and some minor API cleanup. + +### New Features + +* Added support for non-blocking responses based on `guzzlehttp/guzzle-ring`. +* Added a public API for creating a default HTTP adapter. +* Updated the redirect plugin to be non-blocking so that redirects are sent + concurrently. Other plugins like this can now be updated to be non-blocking. +* Added a "progress" event so that you can get upload and download progress + events. +* Added `GuzzleHttp\Pool` which implements FutureInterface and transfers + requests concurrently using a capped pool size as efficiently as possible. +* Added `hasListeners()` to EmitterInterface. +* Removed `GuzzleHttp\ClientInterface::sendAll` and marked + `GuzzleHttp\Client::sendAll` as deprecated (it's still there, just not the + recommended way). + +### Breaking changes + +The breaking changes in this release are relatively minor. The biggest thing to +look out for is that request and response objects no longer implement fluent +interfaces. + +* Removed the fluent interfaces (i.e., `return $this`) from requests, + responses, `GuzzleHttp\Collection`, `GuzzleHttp\Url`, + `GuzzleHttp\Query`, `GuzzleHttp\Post\PostBody`, and + `GuzzleHttp\Cookie\SetCookie`. This blog post provides a good outline of + why I did this: http://ocramius.github.io/blog/fluent-interfaces-are-evil/. + This also makes the Guzzle message interfaces compatible with the current + PSR-7 message proposal. +* Removed "functions.php", so that Guzzle is truly PSR-4 compliant. Except + for the HTTP request functions from function.php, these functions are now + implemented in `GuzzleHttp\Utils` using camelCase. `GuzzleHttp\json_decode` + moved to `GuzzleHttp\Utils::jsonDecode`. `GuzzleHttp\get_path` moved to + `GuzzleHttp\Utils::getPath`. `GuzzleHttp\set_path` moved to + `GuzzleHttp\Utils::setPath`. `GuzzleHttp\batch` should now be + `GuzzleHttp\Pool::batch`, which returns an `objectStorage`. Using functions.php + caused problems for many users: they aren't PSR-4 compliant, require an + explicit include, and needed an if-guard to ensure that the functions are not + declared multiple times. +* Rewrote adapter layer. + * Removing all classes from `GuzzleHttp\Adapter`, these are now + implemented as callables that are stored in `GuzzleHttp\Ring\Client`. + * Removed the concept of "parallel adapters". Sending requests serially or + concurrently is now handled using a single adapter. + * Moved `GuzzleHttp\Adapter\Transaction` to `GuzzleHttp\Transaction`. The + Transaction object now exposes the request, response, and client as public + properties. The getters and setters have been removed. +* Removed the "headers" event. This event was only useful for changing the + body a response once the headers of the response were known. You can implement + a similar behavior in a number of ways. One example might be to use a + FnStream that has access to the transaction being sent. For example, when the + first byte is written, you could check if the response headers match your + expectations, and if so, change the actual stream body that is being + written to. +* Removed the `asArray` parameter from + `GuzzleHttp\Message\MessageInterface::getHeader`. If you want to get a header + value as an array, then use the newly added `getHeaderAsArray()` method of + `MessageInterface`. This change makes the Guzzle interfaces compatible with + the PSR-7 interfaces. +* `GuzzleHttp\Message\MessageFactory` no longer allows subclasses to add + custom request options using double-dispatch (this was an implementation + detail). Instead, you should now provide an associative array to the + constructor which is a mapping of the request option name mapping to a + function that applies the option value to a request. +* Removed the concept of "throwImmediately" from exceptions and error events. + This control mechanism was used to stop a transfer of concurrent requests + from completing. This can now be handled by throwing the exception or by + cancelling a pool of requests or each outstanding future request individually. +* Updated to "GuzzleHttp\Streams" 3.0. + * `GuzzleHttp\Stream\StreamInterface::getContents()` no longer accepts a + `maxLen` parameter. This update makes the Guzzle streams project + compatible with the current PSR-7 proposal. + * `GuzzleHttp\Stream\Stream::__construct`, + `GuzzleHttp\Stream\Stream::factory`, and + `GuzzleHttp\Stream\Utils::create` no longer accept a size in the second + argument. They now accept an associative array of options, including the + "size" key and "metadata" key which can be used to provide custom metadata. + +## 4.2.2 - 2014-09-08 + +* Fixed a memory leak in the CurlAdapter when reusing cURL handles. +* No longer using `request_fulluri` in stream adapter proxies. +* Relative redirects are now based on the last response, not the first response. + +## 4.2.1 - 2014-08-19 + +* Ensuring that the StreamAdapter does not always add a Content-Type header +* Adding automated github releases with a phar and zip + +## 4.2.0 - 2014-08-17 + +* Now merging in default options using a case-insensitive comparison. + Closes https://github.com/guzzle/guzzle/issues/767 +* Added the ability to automatically decode `Content-Encoding` response bodies + using the `decode_content` request option. This is set to `true` by default + to decode the response body if it comes over the wire with a + `Content-Encoding`. Set this value to `false` to disable decoding the + response content, and pass a string to provide a request `Accept-Encoding` + header and turn on automatic response decoding. This feature now allows you + to pass an `Accept-Encoding` header in the headers of a request but still + disable automatic response decoding. + Closes https://github.com/guzzle/guzzle/issues/764 +* Added the ability to throw an exception immediately when transferring + requests in parallel. Closes https://github.com/guzzle/guzzle/issues/760 +* Updating guzzlehttp/streams dependency to ~2.1 +* No longer utilizing the now deprecated namespaced methods from the stream + package. + +## 4.1.8 - 2014-08-14 + +* Fixed an issue in the CurlFactory that caused setting the `stream=false` + request option to throw an exception. + See: https://github.com/guzzle/guzzle/issues/769 +* TransactionIterator now calls rewind on the inner iterator. + See: https://github.com/guzzle/guzzle/pull/765 +* You can now set the `Content-Type` header to `multipart/form-data` + when creating POST requests to force multipart bodies. + See https://github.com/guzzle/guzzle/issues/768 + +## 4.1.7 - 2014-08-07 + +* Fixed an error in the HistoryPlugin that caused the same request and response + to be logged multiple times when an HTTP protocol error occurs. +* Ensuring that cURL does not add a default Content-Type when no Content-Type + has been supplied by the user. This prevents the adapter layer from modifying + the request that is sent over the wire after any listeners may have already + put the request in a desired state (e.g., signed the request). +* Throwing an exception when you attempt to send requests that have the + "stream" set to true in parallel using the MultiAdapter. +* Only calling curl_multi_select when there are active cURL handles. This was + previously changed and caused performance problems on some systems due to PHP + always selecting until the maximum select timeout. +* Fixed a bug where multipart/form-data POST fields were not correctly + aggregated (e.g., values with "&"). + +## 4.1.6 - 2014-08-03 + +* Added helper methods to make it easier to represent messages as strings, + including getting the start line and getting headers as a string. + +## 4.1.5 - 2014-08-02 + +* Automatically retrying cURL "Connection died, retrying a fresh connect" + errors when possible. +* cURL implementation cleanup +* Allowing multiple event subscriber listeners to be registered per event by + passing an array of arrays of listener configuration. + +## 4.1.4 - 2014-07-22 + +* Fixed a bug that caused multi-part POST requests with more than one field to + serialize incorrectly. +* Paths can now be set to "0" +* `ResponseInterface::xml` now accepts a `libxml_options` option and added a + missing default argument that was required when parsing XML response bodies. +* A `save_to` stream is now created lazily, which means that files are not + created on disk unless a request succeeds. + +## 4.1.3 - 2014-07-15 + +* Various fixes to multipart/form-data POST uploads +* Wrapping function.php in an if-statement to ensure Guzzle can be used + globally and in a Composer install +* Fixed an issue with generating and merging in events to an event array +* POST headers are only applied before sending a request to allow you to change + the query aggregator used before uploading +* Added much more robust query string parsing +* Fixed various parsing and normalization issues with URLs +* Fixing an issue where multi-valued headers were not being utilized correctly + in the StreamAdapter + +## 4.1.2 - 2014-06-18 + +* Added support for sending payloads with GET requests + +## 4.1.1 - 2014-06-08 + +* Fixed an issue related to using custom message factory options in subclasses +* Fixed an issue with nested form fields in a multi-part POST +* Fixed an issue with using the `json` request option for POST requests +* Added `ToArrayInterface` to `GuzzleHttp\Cookie\CookieJar` + +## 4.1.0 - 2014-05-27 + +* Added a `json` request option to easily serialize JSON payloads. +* Added a `GuzzleHttp\json_decode()` wrapper to safely parse JSON. +* Added `setPort()` and `getPort()` to `GuzzleHttp\Message\RequestInterface`. +* Added the ability to provide an emitter to a client in the client constructor. +* Added the ability to persist a cookie session using $_SESSION. +* Added a trait that can be used to add event listeners to an iterator. +* Removed request method constants from RequestInterface. +* Fixed warning when invalid request start-lines are received. +* Updated MessageFactory to work with custom request option methods. +* Updated cacert bundle to latest build. + +4.0.2 (2014-04-16) +------------------ + +* Proxy requests using the StreamAdapter now properly use request_fulluri (#632) +* Added the ability to set scalars as POST fields (#628) + +## 4.0.1 - 2014-04-04 + +* The HTTP status code of a response is now set as the exception code of + RequestException objects. +* 303 redirects will now correctly switch from POST to GET requests. +* The default parallel adapter of a client now correctly uses the MultiAdapter. +* HasDataTrait now initializes the internal data array as an empty array so + that the toArray() method always returns an array. + +## 4.0.0 - 2014-03-29 + +* For more information on the 4.0 transition, see: + http://mtdowling.com/blog/2014/03/15/guzzle-4-rc/ +* For information on changes and upgrading, see: + https://github.com/guzzle/guzzle/blob/master/UPGRADING.md#3x-to-40 +* Added `GuzzleHttp\batch()` as a convenience function for sending requests in + parallel without needing to write asynchronous code. +* Restructured how events are added to `GuzzleHttp\ClientInterface::sendAll()`. + You can now pass a callable or an array of associative arrays where each + associative array contains the "fn", "priority", and "once" keys. + +## 4.0.0.rc-2 - 2014-03-25 + +* Removed `getConfig()` and `setConfig()` from clients to avoid confusion + around whether things like base_url, message_factory, etc. should be able to + be retrieved or modified. +* Added `getDefaultOption()` and `setDefaultOption()` to ClientInterface +* functions.php functions were renamed using snake_case to match PHP idioms +* Added support for `HTTP_PROXY`, `HTTPS_PROXY`, and + `GUZZLE_CURL_SELECT_TIMEOUT` environment variables +* Added the ability to specify custom `sendAll()` event priorities +* Added the ability to specify custom stream context options to the stream + adapter. +* Added a functions.php function for `get_path()` and `set_path()` +* CurlAdapter and MultiAdapter now use a callable to generate curl resources +* MockAdapter now properly reads a body and emits a `headers` event +* Updated Url class to check if a scheme and host are set before adding ":" + and "//". This allows empty Url (e.g., "") to be serialized as "". +* Parsing invalid XML no longer emits warnings +* Curl classes now properly throw AdapterExceptions +* Various performance optimizations +* Streams are created with the faster `Stream\create()` function +* Marked deprecation_proxy() as internal +* Test server is now a collection of static methods on a class + +## 4.0.0-rc.1 - 2014-03-15 + +* See https://github.com/guzzle/guzzle/blob/master/UPGRADING.md#3x-to-40 + +## 3.8.1 - 2014-01-28 + +* Bug: Always using GET requests when redirecting from a 303 response +* Bug: CURLOPT_SSL_VERIFYHOST is now correctly set to false when setting `$certificateAuthority` to false in + `Guzzle\Http\ClientInterface::setSslVerification()` +* Bug: RedirectPlugin now uses strict RFC 3986 compliance when combining a base URL with a relative URL +* Bug: The body of a request can now be set to `"0"` +* Sending PHP stream requests no longer forces `HTTP/1.0` +* Adding more information to ExceptionCollection exceptions so that users have more context, including a stack trace of + each sub-exception +* Updated the `$ref` attribute in service descriptions to merge over any existing parameters of a schema (rather than + clobbering everything). +* Merging URLs will now use the query string object from the relative URL (thus allowing custom query aggregators) +* Query strings are now parsed in a way that they do no convert empty keys with no value to have a dangling `=`. + For example `foo&bar=baz` is now correctly parsed and recognized as `foo&bar=baz` rather than `foo=&bar=baz`. +* Now properly escaping the regular expression delimiter when matching Cookie domains. +* Network access is now disabled when loading XML documents + +## 3.8.0 - 2013-12-05 + +* Added the ability to define a POST name for a file +* JSON response parsing now properly walks additionalProperties +* cURL error code 18 is now retried automatically in the BackoffPlugin +* Fixed a cURL error when URLs contain fragments +* Fixed an issue in the BackoffPlugin retry event where it was trying to access all exceptions as if they were + CurlExceptions +* CURLOPT_PROGRESS function fix for PHP 5.5 (69fcc1e) +* Added the ability for Guzzle to work with older versions of cURL that do not support `CURLOPT_TIMEOUT_MS` +* Fixed a bug that was encountered when parsing empty header parameters +* UriTemplate now has a `setRegex()` method to match the docs +* The `debug` request parameter now checks if it is truthy rather than if it exists +* Setting the `debug` request parameter to true shows verbose cURL output instead of using the LogPlugin +* Added the ability to combine URLs using strict RFC 3986 compliance +* Command objects can now return the validation errors encountered by the command +* Various fixes to cache revalidation (#437 and 29797e5) +* Various fixes to the AsyncPlugin +* Cleaned up build scripts + +## 3.7.4 - 2013-10-02 + +* Bug fix: 0 is now an allowed value in a description parameter that has a default value (#430) +* Bug fix: SchemaFormatter now returns an integer when formatting to a Unix timestamp + (see https://github.com/aws/aws-sdk-php/issues/147) +* Bug fix: Cleaned up and fixed URL dot segment removal to properly resolve internal dots +* Minimum PHP version is now properly specified as 5.3.3 (up from 5.3.2) (#420) +* Updated the bundled cacert.pem (#419) +* OauthPlugin now supports adding authentication to headers or query string (#425) + +## 3.7.3 - 2013-09-08 + +* Added the ability to get the exception associated with a request/command when using `MultiTransferException` and + `CommandTransferException`. +* Setting `additionalParameters` of a response to false is now honored when parsing responses with a service description +* Schemas are only injected into response models when explicitly configured. +* No longer guessing Content-Type based on the path of a request. Content-Type is now only guessed based on the path of + an EntityBody. +* Bug fix: ChunkedIterator can now properly chunk a \Traversable as well as an \Iterator. +* Bug fix: FilterIterator now relies on `\Iterator` instead of `\Traversable`. +* Bug fix: Gracefully handling malformed responses in RequestMediator::writeResponseBody() +* Bug fix: Replaced call to canCache with canCacheRequest in the CallbackCanCacheStrategy of the CachePlugin +* Bug fix: Visiting XML attributes first before visiting XML children when serializing requests +* Bug fix: Properly parsing headers that contain commas contained in quotes +* Bug fix: mimetype guessing based on a filename is now case-insensitive + +## 3.7.2 - 2013-08-02 + +* Bug fix: Properly URL encoding paths when using the PHP-only version of the UriTemplate expander + See https://github.com/guzzle/guzzle/issues/371 +* Bug fix: Cookie domains are now matched correctly according to RFC 6265 + See https://github.com/guzzle/guzzle/issues/377 +* Bug fix: GET parameters are now used when calculating an OAuth signature +* Bug fix: Fixed an issue with cache revalidation where the If-None-Match header was being double quoted +* `Guzzle\Common\AbstractHasDispatcher::dispatch()` now returns the event that was dispatched +* `Guzzle\Http\QueryString::factory()` now guesses the most appropriate query aggregator to used based on the input. + See https://github.com/guzzle/guzzle/issues/379 +* Added a way to add custom domain objects to service description parsing using the `operation.parse_class` event. See + https://github.com/guzzle/guzzle/pull/380 +* cURL multi cleanup and optimizations + +## 3.7.1 - 2013-07-05 + +* Bug fix: Setting default options on a client now works +* Bug fix: Setting options on HEAD requests now works. See #352 +* Bug fix: Moving stream factory before send event to before building the stream. See #353 +* Bug fix: Cookies no longer match on IP addresses per RFC 6265 +* Bug fix: Correctly parsing header parameters that are in `<>` and quotes +* Added `cert` and `ssl_key` as request options +* `Host` header can now diverge from the host part of a URL if the header is set manually +* `Guzzle\Service\Command\LocationVisitor\Request\XmlVisitor` was rewritten to change from using SimpleXML to XMLWriter +* OAuth parameters are only added via the plugin if they aren't already set +* Exceptions are now thrown when a URL cannot be parsed +* Returning `false` if `Guzzle\Http\EntityBody::getContentMd5()` fails +* Not setting a `Content-MD5` on a command if calculating the Content-MD5 fails via the CommandContentMd5Plugin + +## 3.7.0 - 2013-06-10 + +* See UPGRADING.md for more information on how to upgrade. +* Requests now support the ability to specify an array of $options when creating a request to more easily modify a + request. You can pass a 'request.options' configuration setting to a client to apply default request options to + every request created by a client (e.g. default query string variables, headers, curl options, etc.). +* Added a static facade class that allows you to use Guzzle with static methods and mount the class to `\Guzzle`. + See `Guzzle\Http\StaticClient::mount`. +* Added `command.request_options` to `Guzzle\Service\Command\AbstractCommand` to pass request options to requests + created by a command (e.g. custom headers, query string variables, timeout settings, etc.). +* Stream size in `Guzzle\Stream\PhpStreamRequestFactory` will now be set if Content-Length is returned in the + headers of a response +* Added `Guzzle\Common\Collection::setPath($path, $value)` to set a value into an array using a nested key + (e.g. `$collection->setPath('foo/baz/bar', 'test'); echo $collection['foo']['bar']['bar'];`) +* ServiceBuilders now support storing and retrieving arbitrary data +* CachePlugin can now purge all resources for a given URI +* CachePlugin can automatically purge matching cached items when a non-idempotent request is sent to a resource +* CachePlugin now uses the Vary header to determine if a resource is a cache hit +* `Guzzle\Http\Message\Response` now implements `\Serializable` +* Added `Guzzle\Cache\CacheAdapterFactory::fromCache()` to more easily create cache adapters +* `Guzzle\Service\ClientInterface::execute()` now accepts an array, single command, or Traversable +* Fixed a bug in `Guzzle\Http\Message\Header\Link::addLink()` +* Better handling of calculating the size of a stream in `Guzzle\Stream\Stream` using fstat() and caching the size +* `Guzzle\Common\Exception\ExceptionCollection` now creates a more readable exception message +* Fixing BC break: Added back the MonologLogAdapter implementation rather than extending from PsrLog so that older + Symfony users can still use the old version of Monolog. +* Fixing BC break: Added the implementation back in for `Guzzle\Http\Message\AbstractMessage::getTokenizedHeader()`. + Now triggering an E_USER_DEPRECATED warning when used. Use `$message->getHeader()->parseParams()`. +* Several performance improvements to `Guzzle\Common\Collection` +* Added an `$options` argument to the end of the following methods of `Guzzle\Http\ClientInterface`: + createRequest, head, delete, put, patch, post, options, prepareRequest +* Added an `$options` argument to the end of `Guzzle\Http\Message\Request\RequestFactoryInterface::createRequest()` +* Added an `applyOptions()` method to `Guzzle\Http\Message\Request\RequestFactoryInterface` +* Changed `Guzzle\Http\ClientInterface::get($uri = null, $headers = null, $body = null)` to + `Guzzle\Http\ClientInterface::get($uri = null, $headers = null, $options = array())`. You can still pass in a + resource, string, or EntityBody into the $options parameter to specify the download location of the response. +* Changed `Guzzle\Common\Collection::__construct($data)` to no longer accepts a null value for `$data` but a + default `array()` +* Added `Guzzle\Stream\StreamInterface::isRepeatable` +* Removed `Guzzle\Http\ClientInterface::setDefaultHeaders(). Use + $client->getConfig()->setPath('request.options/headers/{header_name}', 'value')`. or + $client->getConfig()->setPath('request.options/headers', array('header_name' => 'value'))`. +* Removed `Guzzle\Http\ClientInterface::getDefaultHeaders(). Use $client->getConfig()->getPath('request.options/headers')`. +* Removed `Guzzle\Http\ClientInterface::expandTemplate()` +* Removed `Guzzle\Http\ClientInterface::setRequestFactory()` +* Removed `Guzzle\Http\ClientInterface::getCurlMulti()` +* Removed `Guzzle\Http\Message\RequestInterface::canCache` +* Removed `Guzzle\Http\Message\RequestInterface::setIsRedirect` +* Removed `Guzzle\Http\Message\RequestInterface::isRedirect` +* Made `Guzzle\Http\Client::expandTemplate` and `getUriTemplate` protected methods. +* You can now enable E_USER_DEPRECATED warnings to see if you are using a deprecated method by setting + `Guzzle\Common\Version::$emitWarnings` to true. +* Marked `Guzzle\Http\Message\Request::isResponseBodyRepeatable()` as deprecated. Use + `$request->getResponseBody()->isRepeatable()` instead. +* Marked `Guzzle\Http\Message\Request::canCache()` as deprecated. Use + `Guzzle\Plugin\Cache\DefaultCanCacheStrategy->canCacheRequest()` instead. +* Marked `Guzzle\Http\Message\Request::canCache()` as deprecated. Use + `Guzzle\Plugin\Cache\DefaultCanCacheStrategy->canCacheRequest()` instead. +* Marked `Guzzle\Http\Message\Request::setIsRedirect()` as deprecated. Use the HistoryPlugin instead. +* Marked `Guzzle\Http\Message\Request::isRedirect()` as deprecated. Use the HistoryPlugin instead. +* Marked `Guzzle\Cache\CacheAdapterFactory::factory()` as deprecated +* Marked 'command.headers', 'command.response_body' and 'command.on_complete' as deprecated for AbstractCommand. + These will work through Guzzle 4.0 +* Marked 'request.params' for `Guzzle\Http\Client` as deprecated. Use [request.options][params]. +* Marked `Guzzle\Service\Client::enableMagicMethods()` as deprecated. Magic methods can no longer be disabled on a Guzzle\Service\Client. +* Marked `Guzzle\Service\Client::getDefaultHeaders()` as deprecated. Use $client->getConfig()->getPath('request.options/headers')`. +* Marked `Guzzle\Service\Client::setDefaultHeaders()` as deprecated. Use $client->getConfig()->setPath('request.options/headers/{header_name}', 'value')`. +* Marked `Guzzle\Parser\Url\UrlParser` as deprecated. Just use PHP's `parse_url()` and percent encode your UTF-8. +* Marked `Guzzle\Common\Collection::inject()` as deprecated. +* Marked `Guzzle\Plugin\CurlAuth\CurlAuthPlugin` as deprecated. Use `$client->getConfig()->setPath('request.options/auth', array('user', 'pass', 'Basic|Digest');` +* CacheKeyProviderInterface and DefaultCacheKeyProvider are no longer used. All of this logic is handled in a + CacheStorageInterface. These two objects and interface will be removed in a future version. +* Always setting X-cache headers on cached responses +* Default cache TTLs are now handled by the CacheStorageInterface of a CachePlugin +* `CacheStorageInterface::cache($key, Response $response, $ttl = null)` has changed to `cache(RequestInterface + $request, Response $response);` +* `CacheStorageInterface::fetch($key)` has changed to `fetch(RequestInterface $request);` +* `CacheStorageInterface::delete($key)` has changed to `delete(RequestInterface $request);` +* Added `CacheStorageInterface::purge($url)` +* `DefaultRevalidation::__construct(CacheKeyProviderInterface $cacheKey, CacheStorageInterface $cache, CachePlugin + $plugin)` has changed to `DefaultRevalidation::__construct(CacheStorageInterface $cache, + CanCacheStrategyInterface $canCache = null)` +* Added `RevalidationInterface::shouldRevalidate(RequestInterface $request, Response $response)` + +## 3.6.0 - 2013-05-29 + +* ServiceDescription now implements ToArrayInterface +* Added command.hidden_params to blacklist certain headers from being treated as additionalParameters +* Guzzle can now correctly parse incomplete URLs +* Mixed casing of headers are now forced to be a single consistent casing across all values for that header. +* Messages internally use a HeaderCollection object to delegate handling case-insensitive header resolution +* Removed the whole changedHeader() function system of messages because all header changes now go through addHeader(). +* Specific header implementations can be created for complex headers. When a message creates a header, it uses a + HeaderFactory which can map specific headers to specific header classes. There is now a Link header and + CacheControl header implementation. +* Removed from interface: Guzzle\Http\ClientInterface::setUriTemplate +* Removed from interface: Guzzle\Http\ClientInterface::setCurlMulti() +* Removed Guzzle\Http\Message\Request::receivedRequestHeader() and implemented this functionality in + Guzzle\Http\Curl\RequestMediator +* Removed the optional $asString parameter from MessageInterface::getHeader(). Just cast the header to a string. +* Removed the optional $tryChunkedTransfer option from Guzzle\Http\Message\EntityEnclosingRequestInterface +* Removed the $asObjects argument from Guzzle\Http\Message\MessageInterface::getHeaders() +* Removed Guzzle\Parser\ParserRegister::get(). Use getParser() +* Removed Guzzle\Parser\ParserRegister::set(). Use registerParser(). +* All response header helper functions return a string rather than mixing Header objects and strings inconsistently +* Removed cURL blacklist support. This is no longer necessary now that Expect, Accept, etc. are managed by Guzzle + directly via interfaces +* Removed the injecting of a request object onto a response object. The methods to get and set a request still exist + but are a no-op until removed. +* Most classes that used to require a `Guzzle\Service\Command\CommandInterface` typehint now request a + `Guzzle\Service\Command\ArrayCommandInterface`. +* Added `Guzzle\Http\Message\RequestInterface::startResponse()` to the RequestInterface to handle injecting a response + on a request while the request is still being transferred +* The ability to case-insensitively search for header values +* Guzzle\Http\Message\Header::hasExactHeader +* Guzzle\Http\Message\Header::raw. Use getAll() +* Deprecated cache control specific methods on Guzzle\Http\Message\AbstractMessage. Use the CacheControl header object + instead. +* `Guzzle\Service\Command\CommandInterface` now extends from ToArrayInterface and ArrayAccess +* Added the ability to cast Model objects to a string to view debug information. + +## 3.5.0 - 2013-05-13 + +* Bug: Fixed a regression so that request responses are parsed only once per oncomplete event rather than multiple times +* Bug: Better cleanup of one-time events across the board (when an event is meant to fire once, it will now remove + itself from the EventDispatcher) +* Bug: `Guzzle\Log\MessageFormatter` now properly writes "total_time" and "connect_time" values +* Bug: Cloning an EntityEnclosingRequest now clones the EntityBody too +* Bug: Fixed an undefined index error when parsing nested JSON responses with a sentAs parameter that reference a + non-existent key +* Bug: All __call() method arguments are now required (helps with mocking frameworks) +* Deprecating Response::getRequest() and now using a shallow clone of a request object to remove a circular reference + to help with refcount based garbage collection of resources created by sending a request +* Deprecating ZF1 cache and log adapters. These will be removed in the next major version. +* Deprecating `Response::getPreviousResponse()` (method signature still exists, but it's deprecated). Use the + HistoryPlugin for a history. +* Added a `responseBody` alias for the `response_body` location +* Refactored internals to no longer rely on Response::getRequest() +* HistoryPlugin can now be cast to a string +* HistoryPlugin now logs transactions rather than requests and responses to more accurately keep track of the requests + and responses that are sent over the wire +* Added `getEffectiveUrl()` and `getRedirectCount()` to Response objects + +## 3.4.3 - 2013-04-30 + +* Bug fix: Fixing bug introduced in 3.4.2 where redirect responses are duplicated on the final redirected response +* Added a check to re-extract the temp cacert bundle from the phar before sending each request + +## 3.4.2 - 2013-04-29 + +* Bug fix: Stream objects now work correctly with "a" and "a+" modes +* Bug fix: Removing `Transfer-Encoding: chunked` header when a Content-Length is present +* Bug fix: AsyncPlugin no longer forces HEAD requests +* Bug fix: DateTime timezones are now properly handled when using the service description schema formatter +* Bug fix: CachePlugin now properly handles stale-if-error directives when a request to the origin server fails +* Setting a response on a request will write to the custom request body from the response body if one is specified +* LogPlugin now writes to php://output when STDERR is undefined +* Added the ability to set multiple POST files for the same key in a single call +* application/x-www-form-urlencoded POSTs now use the utf-8 charset by default +* Added the ability to queue CurlExceptions to the MockPlugin +* Cleaned up how manual responses are queued on requests (removed "queued_response" and now using request.before_send) +* Configuration loading now allows remote files + +## 3.4.1 - 2013-04-16 + +* Large refactoring to how CurlMulti handles work. There is now a proxy that sits in front of a pool of CurlMulti + handles. This greatly simplifies the implementation, fixes a couple bugs, and provides a small performance boost. +* Exceptions are now properly grouped when sending requests in parallel +* Redirects are now properly aggregated when a multi transaction fails +* Redirects now set the response on the original object even in the event of a failure +* Bug fix: Model names are now properly set even when using $refs +* Added support for PHP 5.5's CurlFile to prevent warnings with the deprecated @ syntax +* Added support for oauth_callback in OAuth signatures +* Added support for oauth_verifier in OAuth signatures +* Added support to attempt to retrieve a command first literally, then ucfirst, the with inflection + +## 3.4.0 - 2013-04-11 + +* Bug fix: URLs are now resolved correctly based on http://tools.ietf.org/html/rfc3986#section-5.2. #289 +* Bug fix: Absolute URLs with a path in a service description will now properly override the base URL. #289 +* Bug fix: Parsing a query string with a single PHP array value will now result in an array. #263 +* Bug fix: Better normalization of the User-Agent header to prevent duplicate headers. #264. +* Bug fix: Added `number` type to service descriptions. +* Bug fix: empty parameters are removed from an OAuth signature +* Bug fix: Revalidating a cache entry prefers the Last-Modified over the Date header +* Bug fix: Fixed "array to string" error when validating a union of types in a service description +* Bug fix: Removed code that attempted to determine the size of a stream when data is written to the stream +* Bug fix: Not including an `oauth_token` if the value is null in the OauthPlugin. +* Bug fix: Now correctly aggregating successful requests and failed requests in CurlMulti when a redirect occurs. +* The new default CURLOPT_TIMEOUT setting has been increased to 150 seconds so that Guzzle works on poor connections. +* Added a feature to EntityEnclosingRequest::setBody() that will automatically set the Content-Type of the request if + the Content-Type can be determined based on the entity body or the path of the request. +* Added the ability to overwrite configuration settings in a client when grabbing a throwaway client from a builder. +* Added support for a PSR-3 LogAdapter. +* Added a `command.after_prepare` event +* Added `oauth_callback` parameter to the OauthPlugin +* Added the ability to create a custom stream class when using a stream factory +* Added a CachingEntityBody decorator +* Added support for `additionalParameters` in service descriptions to define how custom parameters are serialized. +* The bundled SSL certificate is now provided in the phar file and extracted when running Guzzle from a phar. +* You can now send any EntityEnclosingRequest with POST fields or POST files and cURL will handle creating bodies +* POST requests using a custom entity body are now treated exactly like PUT requests but with a custom cURL method. This + means that the redirect behavior of POST requests with custom bodies will not be the same as POST requests that use + POST fields or files (the latter is only used when emulating a form POST in the browser). +* Lots of cleanup to CurlHandle::factory and RequestFactory::createRequest + +## 3.3.1 - 2013-03-10 + +* Added the ability to create PHP streaming responses from HTTP requests +* Bug fix: Running any filters when parsing response headers with service descriptions +* Bug fix: OauthPlugin fixes to allow for multi-dimensional array signing, and sorting parameters before signing +* Bug fix: Removed the adding of default empty arrays and false Booleans to responses in order to be consistent across + response location visitors. +* Bug fix: Removed the possibility of creating configuration files with circular dependencies +* RequestFactory::create() now uses the key of a POST file when setting the POST file name +* Added xmlAllowEmpty to serialize an XML body even if no XML specific parameters are set + +## 3.3.0 - 2013-03-03 + +* A large number of performance optimizations have been made +* Bug fix: Added 'wb' as a valid write mode for streams +* Bug fix: `Guzzle\Http\Message\Response::json()` now allows scalar values to be returned +* Bug fix: Fixed bug in `Guzzle\Http\Message\Response` where wrapping quotes were stripped from `getEtag()` +* BC: Removed `Guzzle\Http\Utils` class +* BC: Setting a service description on a client will no longer modify the client's command factories. +* BC: Emitting IO events from a RequestMediator is now a parameter that must be set in a request's curl options using + the 'emit_io' key. This was previously set under a request's parameters using 'curl.emit_io' +* BC: `Guzzle\Stream\Stream::getWrapper()` and `Guzzle\Stream\Stream::getSteamType()` are no longer converted to + lowercase +* Operation parameter objects are now lazy loaded internally +* Added ErrorResponsePlugin that can throw errors for responses defined in service description operations' errorResponses +* Added support for instantiating responseType=class responseClass classes. Classes must implement + `Guzzle\Service\Command\ResponseClassInterface` +* Added support for additionalProperties for top-level parameters in responseType=model responseClasses. These + additional properties also support locations and can be used to parse JSON responses where the outermost part of the + JSON is an array +* Added support for nested renaming of JSON models (rename sentAs to name) +* CachePlugin + * Added support for stale-if-error so that the CachePlugin can now serve stale content from the cache on error + * Debug headers can now added to cached response in the CachePlugin + +## 3.2.0 - 2013-02-14 + +* CurlMulti is no longer reused globally. A new multi object is created per-client. This helps to isolate clients. +* URLs with no path no longer contain a "/" by default +* Guzzle\Http\QueryString does no longer manages the leading "?". This is now handled in Guzzle\Http\Url. +* BadResponseException no longer includes the full request and response message +* Adding setData() to Guzzle\Service\Description\ServiceDescriptionInterface +* Adding getResponseBody() to Guzzle\Http\Message\RequestInterface +* Various updates to classes to use ServiceDescriptionInterface type hints rather than ServiceDescription +* Header values can now be normalized into distinct values when multiple headers are combined with a comma separated list +* xmlEncoding can now be customized for the XML declaration of a XML service description operation +* Guzzle\Http\QueryString now uses Guzzle\Http\QueryAggregator\QueryAggregatorInterface objects to add custom value + aggregation and no longer uses callbacks +* The URL encoding implementation of Guzzle\Http\QueryString can now be customized +* Bug fix: Filters were not always invoked for array service description parameters +* Bug fix: Redirects now use a target response body rather than a temporary response body +* Bug fix: The default exponential backoff BackoffPlugin was not giving when the request threshold was exceeded +* Bug fix: Guzzle now takes the first found value when grabbing Cache-Control directives + +## 3.1.2 - 2013-01-27 + +* Refactored how operation responses are parsed. Visitors now include a before() method responsible for parsing the + response body. For example, the XmlVisitor now parses the XML response into an array in the before() method. +* Fixed an issue where cURL would not automatically decompress responses when the Accept-Encoding header was sent +* CURLOPT_SSL_VERIFYHOST is never set to 1 because it is deprecated (see 5e0ff2ef20f839e19d1eeb298f90ba3598784444) +* Fixed a bug where redirect responses were not chained correctly using getPreviousResponse() +* Setting default headers on a client after setting the user-agent will not erase the user-agent setting + +## 3.1.1 - 2013-01-20 + +* Adding wildcard support to Guzzle\Common\Collection::getPath() +* Adding alias support to ServiceBuilder configs +* Adding Guzzle\Service\Resource\CompositeResourceIteratorFactory and cleaning up factory interface + +## 3.1.0 - 2013-01-12 + +* BC: CurlException now extends from RequestException rather than BadResponseException +* BC: Renamed Guzzle\Plugin\Cache\CanCacheStrategyInterface::canCache() to canCacheRequest() and added CanCacheResponse() +* Added getData to ServiceDescriptionInterface +* Added context array to RequestInterface::setState() +* Bug: Removing hard dependency on the BackoffPlugin from Guzzle\Http +* Bug: Adding required content-type when JSON request visitor adds JSON to a command +* Bug: Fixing the serialization of a service description with custom data +* Made it easier to deal with exceptions thrown when transferring commands or requests in parallel by providing + an array of successful and failed responses +* Moved getPath from Guzzle\Service\Resource\Model to Guzzle\Common\Collection +* Added Guzzle\Http\IoEmittingEntityBody +* Moved command filtration from validators to location visitors +* Added `extends` attributes to service description parameters +* Added getModels to ServiceDescriptionInterface + +## 3.0.7 - 2012-12-19 + +* Fixing phar detection when forcing a cacert to system if null or true +* Allowing filename to be passed to `Guzzle\Http\Message\Request::setResponseBody()` +* Cleaning up `Guzzle\Common\Collection::inject` method +* Adding a response_body location to service descriptions + +## 3.0.6 - 2012-12-09 + +* CurlMulti performance improvements +* Adding setErrorResponses() to Operation +* composer.json tweaks + +## 3.0.5 - 2012-11-18 + +* Bug: Fixing an infinite recursion bug caused from revalidating with the CachePlugin +* Bug: Response body can now be a string containing "0" +* Bug: Using Guzzle inside of a phar uses system by default but now allows for a custom cacert +* Bug: QueryString::fromString now properly parses query string parameters that contain equal signs +* Added support for XML attributes in service description responses +* DefaultRequestSerializer now supports array URI parameter values for URI template expansion +* Added better mimetype guessing to requests and post files + +## 3.0.4 - 2012-11-11 + +* Bug: Fixed a bug when adding multiple cookies to a request to use the correct glue value +* Bug: Cookies can now be added that have a name, domain, or value set to "0" +* Bug: Using the system cacert bundle when using the Phar +* Added json and xml methods to Response to make it easier to parse JSON and XML response data into data structures +* Enhanced cookie jar de-duplication +* Added the ability to enable strict cookie jars that throw exceptions when invalid cookies are added +* Added setStream to StreamInterface to actually make it possible to implement custom rewind behavior for entity bodies +* Added the ability to create any sort of hash for a stream rather than just an MD5 hash + +## 3.0.3 - 2012-11-04 + +* Implementing redirects in PHP rather than cURL +* Added PECL URI template extension and using as default parser if available +* Bug: Fixed Content-Length parsing of Response factory +* Adding rewind() method to entity bodies and streams. Allows for custom rewinding of non-repeatable streams. +* Adding ToArrayInterface throughout library +* Fixing OauthPlugin to create unique nonce values per request + +## 3.0.2 - 2012-10-25 + +* Magic methods are enabled by default on clients +* Magic methods return the result of a command +* Service clients no longer require a base_url option in the factory +* Bug: Fixed an issue with URI templates where null template variables were being expanded + +## 3.0.1 - 2012-10-22 + +* Models can now be used like regular collection objects by calling filter, map, etc. +* Models no longer require a Parameter structure or initial data in the constructor +* Added a custom AppendIterator to get around a PHP bug with the `\AppendIterator` + +## 3.0.0 - 2012-10-15 + +* Rewrote service description format to be based on Swagger + * Now based on JSON schema + * Added nested input structures and nested response models + * Support for JSON and XML input and output models + * Renamed `commands` to `operations` + * Removed dot class notation + * Removed custom types +* Broke the project into smaller top-level namespaces to be more component friendly +* Removed support for XML configs and descriptions. Use arrays or JSON files. +* Removed the Validation component and Inspector +* Moved all cookie code to Guzzle\Plugin\Cookie +* Magic methods on a Guzzle\Service\Client now return the command un-executed. +* Calling getResult() or getResponse() on a command will lazily execute the command if needed. +* Now shipping with cURL's CA certs and using it by default +* Added previousResponse() method to response objects +* No longer sending Accept and Accept-Encoding headers on every request +* Only sending an Expect header by default when a payload is greater than 1MB +* Added/moved client options: + * curl.blacklist to curl.option.blacklist + * Added ssl.certificate_authority +* Added a Guzzle\Iterator component +* Moved plugins from Guzzle\Http\Plugin to Guzzle\Plugin +* Added a more robust backoff retry strategy (replaced the ExponentialBackoffPlugin) +* Added a more robust caching plugin +* Added setBody to response objects +* Updating LogPlugin to use a more flexible MessageFormatter +* Added a completely revamped build process +* Cleaning up Collection class and removing default values from the get method +* Fixed ZF2 cache adapters + +## 2.8.8 - 2012-10-15 + +* Bug: Fixed a cookie issue that caused dot prefixed domains to not match where popular browsers did + +## 2.8.7 - 2012-09-30 + +* Bug: Fixed config file aliases for JSON includes +* Bug: Fixed cookie bug on a request object by using CookieParser to parse cookies on requests +* Bug: Removing the path to a file when sending a Content-Disposition header on a POST upload +* Bug: Hardening request and response parsing to account for missing parts +* Bug: Fixed PEAR packaging +* Bug: Fixed Request::getInfo +* Bug: Fixed cases where CURLM_CALL_MULTI_PERFORM return codes were causing curl transactions to fail +* Adding the ability for the namespace Iterator factory to look in multiple directories +* Added more getters/setters/removers from service descriptions +* Added the ability to remove POST fields from OAuth signatures +* OAuth plugin now supports 2-legged OAuth + +## 2.8.6 - 2012-09-05 + +* Added the ability to modify and build service descriptions +* Added the use of visitors to apply parameters to locations in service descriptions using the dynamic command +* Added a `json` parameter location +* Now allowing dot notation for classes in the CacheAdapterFactory +* Using the union of two arrays rather than an array_merge when extending service builder services and service params +* Ensuring that a service is a string before doing strpos() checks on it when substituting services for references + in service builder config files. +* Services defined in two different config files that include one another will by default replace the previously + defined service, but you can now create services that extend themselves and merge their settings over the previous +* The JsonLoader now supports aliasing filenames with different filenames. This allows you to alias something like + '_default' with a default JSON configuration file. + +## 2.8.5 - 2012-08-29 + +* Bug: Suppressed empty arrays from URI templates +* Bug: Added the missing $options argument from ServiceDescription::factory to enable caching +* Added support for HTTP responses that do not contain a reason phrase in the start-line +* AbstractCommand commands are now invokable +* Added a way to get the data used when signing an Oauth request before a request is sent + +## 2.8.4 - 2012-08-15 + +* Bug: Custom delay time calculations are no longer ignored in the ExponentialBackoffPlugin +* Added the ability to transfer entity bodies as a string rather than streamed. This gets around curl error 65. Set `body_as_string` in a request's curl options to enable. +* Added a StreamInterface, EntityBodyInterface, and added ftell() to Guzzle\Common\Stream +* Added an AbstractEntityBodyDecorator and a ReadLimitEntityBody decorator to transfer only a subset of a decorated stream +* Stream and EntityBody objects will now return the file position to the previous position after a read required operation (e.g. getContentMd5()) +* Added additional response status codes +* Removed SSL information from the default User-Agent header +* DELETE requests can now send an entity body +* Added an EventDispatcher to the ExponentialBackoffPlugin and added an ExponentialBackoffLogger to log backoff retries +* Added the ability of the MockPlugin to consume mocked request bodies +* LogPlugin now exposes request and response objects in the extras array + +## 2.8.3 - 2012-07-30 + +* Bug: Fixed a case where empty POST requests were sent as GET requests +* Bug: Fixed a bug in ExponentialBackoffPlugin that caused fatal errors when retrying an EntityEnclosingRequest that does not have a body +* Bug: Setting the response body of a request to null after completing a request, not when setting the state of a request to new +* Added multiple inheritance to service description commands +* Added an ApiCommandInterface and added `getParamNames()` and `hasParam()` +* Removed the default 2mb size cutoff from the Md5ValidatorPlugin so that it now defaults to validating everything +* Changed CurlMulti::perform to pass a smaller timeout to CurlMulti::executeHandles + +## 2.8.2 - 2012-07-24 + +* Bug: Query string values set to 0 are no longer dropped from the query string +* Bug: A Collection object is no longer created each time a call is made to `Guzzle\Service\Command\AbstractCommand::getRequestHeaders()` +* Bug: `+` is now treated as an encoded space when parsing query strings +* QueryString and Collection performance improvements +* Allowing dot notation for class paths in filters attribute of a service descriptions + +## 2.8.1 - 2012-07-16 + +* Loosening Event Dispatcher dependency +* POST redirects can now be customized using CURLOPT_POSTREDIR + +## 2.8.0 - 2012-07-15 + +* BC: Guzzle\Http\Query + * Query strings with empty variables will always show an equal sign unless the variable is set to QueryString::BLANK (e.g. ?acl= vs ?acl) + * Changed isEncodingValues() and isEncodingFields() to isUrlEncoding() + * Changed setEncodeValues(bool) and setEncodeFields(bool) to useUrlEncoding(bool) + * Changed the aggregation functions of QueryString to be static methods + * Can now use fromString() with querystrings that have a leading ? +* cURL configuration values can be specified in service descriptions using `curl.` prefixed parameters +* Content-Length is set to 0 before emitting the request.before_send event when sending an empty request body +* Cookies are no longer URL decoded by default +* Bug: URI template variables set to null are no longer expanded + +## 2.7.2 - 2012-07-02 + +* BC: Moving things to get ready for subtree splits. Moving Inflection into Common. Moving Guzzle\Http\Parser to Guzzle\Parser. +* BC: Removing Guzzle\Common\Batch\Batch::count() and replacing it with isEmpty() +* CachePlugin now allows for a custom request parameter function to check if a request can be cached +* Bug fix: CachePlugin now only caches GET and HEAD requests by default +* Bug fix: Using header glue when transferring headers over the wire +* Allowing deeply nested arrays for composite variables in URI templates +* Batch divisors can now return iterators or arrays + +## 2.7.1 - 2012-06-26 + +* Minor patch to update version number in UA string +* Updating build process + +## 2.7.0 - 2012-06-25 + +* BC: Inflection classes moved to Guzzle\Inflection. No longer static methods. Can now inject custom inflectors into classes. +* BC: Removed magic setX methods from commands +* BC: Magic methods mapped to service description commands are now inflected in the command factory rather than the client __call() method +* Verbose cURL options are no longer enabled by default. Set curl.debug to true on a client to enable. +* Bug: Now allowing colons in a response start-line (e.g. HTTP/1.1 503 Service Unavailable: Back-end server is at capacity) +* Guzzle\Service\Resource\ResourceIteratorApplyBatched now internally uses the Guzzle\Common\Batch namespace +* Added Guzzle\Service\Plugin namespace and a PluginCollectionPlugin +* Added the ability to set POST fields and files in a service description +* Guzzle\Http\EntityBody::factory() now accepts objects with a __toString() method +* Adding a command.before_prepare event to clients +* Added BatchClosureTransfer and BatchClosureDivisor +* BatchTransferException now includes references to the batch divisor and transfer strategies +* Fixed some tests so that they pass more reliably +* Added Guzzle\Common\Log\ArrayLogAdapter + +## 2.6.6 - 2012-06-10 + +* BC: Removing Guzzle\Http\Plugin\BatchQueuePlugin +* BC: Removing Guzzle\Service\Command\CommandSet +* Adding generic batching system (replaces the batch queue plugin and command set) +* Updating ZF cache and log adapters and now using ZF's composer repository +* Bug: Setting the name of each ApiParam when creating through an ApiCommand +* Adding result_type, result_doc, deprecated, and doc_url to service descriptions +* Bug: Changed the default cookie header casing back to 'Cookie' + +## 2.6.5 - 2012-06-03 + +* BC: Renaming Guzzle\Http\Message\RequestInterface::getResourceUri() to getResource() +* BC: Removing unused AUTH_BASIC and AUTH_DIGEST constants from +* BC: Guzzle\Http\Cookie is now used to manage Set-Cookie data, not Cookie data +* BC: Renaming methods in the CookieJarInterface +* Moving almost all cookie logic out of the CookiePlugin and into the Cookie or CookieJar implementations +* Making the default glue for HTTP headers ';' instead of ',' +* Adding a removeValue to Guzzle\Http\Message\Header +* Adding getCookies() to request interface. +* Making it easier to add event subscribers to HasDispatcherInterface classes. Can now directly call addSubscriber() + +## 2.6.4 - 2012-05-30 + +* BC: Cleaning up how POST files are stored in EntityEnclosingRequest objects. Adding PostFile class. +* BC: Moving ApiCommand specific functionality from the Inspector and on to the ApiCommand +* Bug: Fixing magic method command calls on clients +* Bug: Email constraint only validates strings +* Bug: Aggregate POST fields when POST files are present in curl handle +* Bug: Fixing default User-Agent header +* Bug: Only appending or prepending parameters in commands if they are specified +* Bug: Not requiring response reason phrases or status codes to match a predefined list of codes +* Allowing the use of dot notation for class namespaces when using instance_of constraint +* Added any_match validation constraint +* Added an AsyncPlugin +* Passing request object to the calculateWait method of the ExponentialBackoffPlugin +* Allowing the result of a command object to be changed +* Parsing location and type sub values when instantiating a service description rather than over and over at runtime + +## 2.6.3 - 2012-05-23 + +* [BC] Guzzle\Common\FromConfigInterface no longer requires any config options. +* [BC] Refactoring how POST files are stored on an EntityEnclosingRequest. They are now separate from POST fields. +* You can now use an array of data when creating PUT request bodies in the request factory. +* Removing the requirement that HTTPS requests needed a Cache-Control: public directive to be cacheable. +* [Http] Adding support for Content-Type in multipart POST uploads per upload +* [Http] Added support for uploading multiple files using the same name (foo[0], foo[1]) +* Adding more POST data operations for easier manipulation of POST data. +* You can now set empty POST fields. +* The body of a request is only shown on EntityEnclosingRequest objects that do not use POST files. +* Split the Guzzle\Service\Inspector::validateConfig method into two methods. One to initialize when a command is created, and one to validate. +* CS updates + +## 2.6.2 - 2012-05-19 + +* [Http] Better handling of nested scope requests in CurlMulti. Requests are now always prepares in the send() method rather than the addRequest() method. + +## 2.6.1 - 2012-05-19 + +* [BC] Removing 'path' support in service descriptions. Use 'uri'. +* [BC] Guzzle\Service\Inspector::parseDocBlock is now protected. Adding getApiParamsForClass() with cache. +* [BC] Removing Guzzle\Common\NullObject. Use https://github.com/mtdowling/NullObject if you need it. +* [BC] Removing Guzzle\Common\XmlElement. +* All commands, both dynamic and concrete, have ApiCommand objects. +* Adding a fix for CurlMulti so that if all of the connections encounter some sort of curl error, then the loop exits. +* Adding checks to EntityEnclosingRequest so that empty POST files and fields are ignored. +* Making the method signature of Guzzle\Service\Builder\ServiceBuilder::factory more flexible. + +## 2.6.0 - 2012-05-15 + +* [BC] Moving Guzzle\Service\Builder to Guzzle\Service\Builder\ServiceBuilder +* [BC] Executing a Command returns the result of the command rather than the command +* [BC] Moving all HTTP parsing logic to Guzzle\Http\Parsers. Allows for faster C implementations if needed. +* [BC] Changing the Guzzle\Http\Message\Response::setProtocol() method to accept a protocol and version in separate args. +* [BC] Moving ResourceIterator* to Guzzle\Service\Resource +* [BC] Completely refactored ResourceIterators to iterate over a cloned command object +* [BC] Moved Guzzle\Http\UriTemplate to Guzzle\Http\Parser\UriTemplate\UriTemplate +* [BC] Guzzle\Guzzle is now deprecated +* Moving Guzzle\Common\Guzzle::inject to Guzzle\Common\Collection::inject +* Adding Guzzle\Version class to give version information about Guzzle +* Adding Guzzle\Http\Utils class to provide getDefaultUserAgent() and getHttpDate() +* Adding Guzzle\Curl\CurlVersion to manage caching curl_version() data +* ServiceDescription and ServiceBuilder are now cacheable using similar configs +* Changing the format of XML and JSON service builder configs. Backwards compatible. +* Cleaned up Cookie parsing +* Trimming the default Guzzle User-Agent header +* Adding a setOnComplete() method to Commands that is called when a command completes +* Keeping track of requests that were mocked in the MockPlugin +* Fixed a caching bug in the CacheAdapterFactory +* Inspector objects can be injected into a Command object +* Refactoring a lot of code and tests to be case insensitive when dealing with headers +* Adding Guzzle\Http\Message\HeaderComparison for easy comparison of HTTP headers using a DSL +* Adding the ability to set global option overrides to service builder configs +* Adding the ability to include other service builder config files from within XML and JSON files +* Moving the parseQuery method out of Url and on to QueryString::fromString() as a static factory method. + +## 2.5.0 - 2012-05-08 + +* Major performance improvements +* [BC] Simplifying Guzzle\Common\Collection. Please check to see if you are using features that are now deprecated. +* [BC] Using a custom validation system that allows a flyweight implementation for much faster validation. No longer using Symfony2 Validation component. +* [BC] No longer supporting "{{ }}" for injecting into command or UriTemplates. Use "{}" +* Added the ability to passed parameters to all requests created by a client +* Added callback functionality to the ExponentialBackoffPlugin +* Using microtime in ExponentialBackoffPlugin to allow more granular backoff strategies. +* Rewinding request stream bodies when retrying requests +* Exception is thrown when JSON response body cannot be decoded +* Added configurable magic method calls to clients and commands. This is off by default. +* Fixed a defect that added a hash to every parsed URL part +* Fixed duplicate none generation for OauthPlugin. +* Emitting an event each time a client is generated by a ServiceBuilder +* Using an ApiParams object instead of a Collection for parameters of an ApiCommand +* cache.* request parameters should be renamed to params.cache.* +* Added the ability to set arbitrary curl options on requests (disable_wire, progress, etc.). See CurlHandle. +* Added the ability to disable type validation of service descriptions +* ServiceDescriptions and ServiceBuilders are now Serializable diff --git a/vendor/guzzlehttp/guzzle/Dockerfile b/vendor/guzzlehttp/guzzle/Dockerfile new file mode 100644 index 00000000..75712faa --- /dev/null +++ b/vendor/guzzlehttp/guzzle/Dockerfile @@ -0,0 +1,18 @@ +FROM composer:latest as setup + +RUN mkdir /guzzle + +WORKDIR /guzzle + +RUN set -xe \ + && composer init --name=guzzlehttp/test --description="Simple project for testing Guzzle scripts" --author="Márk Sági-Kazár " --no-interaction \ + && composer require guzzlehttp/guzzle + + +FROM php:7.3 + +RUN mkdir /guzzle + +WORKDIR /guzzle + +COPY --from=setup /guzzle /guzzle diff --git a/vendor/guzzlehttp/guzzle/LICENSE b/vendor/guzzlehttp/guzzle/LICENSE new file mode 100644 index 00000000..2073a73a --- /dev/null +++ b/vendor/guzzlehttp/guzzle/LICENSE @@ -0,0 +1,19 @@ +Copyright (c) 2011-2018 Michael Dowling, https://github.com/mtdowling + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +THE SOFTWARE. diff --git a/vendor/guzzlehttp/guzzle/README.md b/vendor/guzzlehttp/guzzle/README.md new file mode 100644 index 00000000..b8e9f8ec --- /dev/null +++ b/vendor/guzzlehttp/guzzle/README.md @@ -0,0 +1,90 @@ +Guzzle, PHP HTTP client +======================= + +[![Latest Version](https://img.shields.io/github/release/guzzle/guzzle.svg?style=flat-square)](https://github.com/guzzle/guzzle/releases) +[![Build Status](https://img.shields.io/travis/guzzle/guzzle.svg?style=flat-square)](https://travis-ci.org/guzzle/guzzle) +[![Total Downloads](https://img.shields.io/packagist/dt/guzzlehttp/guzzle.svg?style=flat-square)](https://packagist.org/packages/guzzlehttp/guzzle) + +Guzzle is a PHP HTTP client that makes it easy to send HTTP requests and +trivial to integrate with web services. + +- Simple interface for building query strings, POST requests, streaming large + uploads, streaming large downloads, using HTTP cookies, uploading JSON data, + etc... +- Can send both synchronous and asynchronous requests using the same interface. +- Uses PSR-7 interfaces for requests, responses, and streams. This allows you + to utilize other PSR-7 compatible libraries with Guzzle. +- Abstracts away the underlying HTTP transport, allowing you to write + environment and transport agnostic code; i.e., no hard dependency on cURL, + PHP streams, sockets, or non-blocking event loops. +- Middleware system allows you to augment and compose client behavior. + +```php +$client = new \GuzzleHttp\Client(); +$response = $client->request('GET', 'https://api.github.com/repos/guzzle/guzzle'); + +echo $response->getStatusCode(); # 200 +echo $response->getHeaderLine('content-type'); # 'application/json; charset=utf8' +echo $response->getBody(); # '{"id": 1420053, "name": "guzzle", ...}' + +# Send an asynchronous request. +$request = new \GuzzleHttp\Psr7\Request('GET', 'http://httpbin.org'); +$promise = $client->sendAsync($request)->then(function ($response) { + echo 'I completed! ' . $response->getBody(); +}); + +$promise->wait(); +``` + +## Help and docs + +- [Documentation](http://guzzlephp.org/) +- [Stack Overflow](http://stackoverflow.com/questions/tagged/guzzle) +- [Gitter](https://gitter.im/guzzle/guzzle) + + +## Installing Guzzle + +The recommended way to install Guzzle is through +[Composer](http://getcomposer.org). + +```bash +# Install Composer +curl -sS https://getcomposer.org/installer | php +``` + +Next, run the Composer command to install the latest stable version of Guzzle: + +```bash +composer require guzzlehttp/guzzle +``` + +After installing, you need to require Composer's autoloader: + +```php +require 'vendor/autoload.php'; +``` + +You can then later update Guzzle using composer: + + ```bash +composer update + ``` + + +## Version Guidance + +| Version | Status | Packagist | Namespace | Repo | Docs | PSR-7 | PHP Version | +|---------|------------|---------------------|--------------|---------------------|---------------------|-------|-------------| +| 3.x | EOL | `guzzle/guzzle` | `Guzzle` | [v3][guzzle-3-repo] | [v3][guzzle-3-docs] | No | >= 5.3.3 | +| 4.x | EOL | `guzzlehttp/guzzle` | `GuzzleHttp` | [v4][guzzle-4-repo] | N/A | No | >= 5.4 | +| 5.x | EOL | `guzzlehttp/guzzle` | `GuzzleHttp` | [v5][guzzle-5-repo] | [v5][guzzle-5-docs] | No | >= 5.4 | +| 6.x | Latest | `guzzlehttp/guzzle` | `GuzzleHttp` | [v6][guzzle-6-repo] | [v6][guzzle-6-docs] | Yes | >= 5.5 | + +[guzzle-3-repo]: https://github.com/guzzle/guzzle3 +[guzzle-4-repo]: https://github.com/guzzle/guzzle/tree/4.x +[guzzle-5-repo]: https://github.com/guzzle/guzzle/tree/5.3 +[guzzle-6-repo]: https://github.com/guzzle/guzzle +[guzzle-3-docs]: http://guzzle3.readthedocs.org +[guzzle-5-docs]: http://guzzle.readthedocs.org/en/5.3/ +[guzzle-6-docs]: http://guzzle.readthedocs.org/en/latest/ diff --git a/vendor/guzzlehttp/guzzle/UPGRADING.md b/vendor/guzzlehttp/guzzle/UPGRADING.md new file mode 100644 index 00000000..3636fc69 --- /dev/null +++ b/vendor/guzzlehttp/guzzle/UPGRADING.md @@ -0,0 +1,1203 @@ +Guzzle Upgrade Guide +==================== + +5.0 to 6.0 +---------- + +Guzzle now uses [PSR-7](http://www.php-fig.org/psr/psr-7/) for HTTP messages. +Due to the fact that these messages are immutable, this prompted a refactoring +of Guzzle to use a middleware based system rather than an event system. Any +HTTP message interaction (e.g., `GuzzleHttp\Message\Request`) need to be +updated to work with the new immutable PSR-7 request and response objects. Any +event listeners or subscribers need to be updated to become middleware +functions that wrap handlers (or are injected into a +`GuzzleHttp\HandlerStack`). + +- Removed `GuzzleHttp\BatchResults` +- Removed `GuzzleHttp\Collection` +- Removed `GuzzleHttp\HasDataTrait` +- Removed `GuzzleHttp\ToArrayInterface` +- The `guzzlehttp/streams` dependency has been removed. Stream functionality + is now present in the `GuzzleHttp\Psr7` namespace provided by the + `guzzlehttp/psr7` package. +- Guzzle no longer uses ReactPHP promises and now uses the + `guzzlehttp/promises` library. We use a custom promise library for three + significant reasons: + 1. React promises (at the time of writing this) are recursive. Promise + chaining and promise resolution will eventually blow the stack. Guzzle + promises are not recursive as they use a sort of trampolining technique. + Note: there has been movement in the React project to modify promises to + no longer utilize recursion. + 2. Guzzle needs to have the ability to synchronously block on a promise to + wait for a result. Guzzle promises allows this functionality (and does + not require the use of recursion). + 3. Because we need to be able to wait on a result, doing so using React + promises requires wrapping react promises with RingPHP futures. This + overhead is no longer needed, reducing stack sizes, reducing complexity, + and improving performance. +- `GuzzleHttp\Mimetypes` has been moved to a function in + `GuzzleHttp\Psr7\mimetype_from_extension` and + `GuzzleHttp\Psr7\mimetype_from_filename`. +- `GuzzleHttp\Query` and `GuzzleHttp\QueryParser` have been removed. Query + strings must now be passed into request objects as strings, or provided to + the `query` request option when creating requests with clients. The `query` + option uses PHP's `http_build_query` to convert an array to a string. If you + need a different serialization technique, you will need to pass the query + string in as a string. There are a couple helper functions that will make + working with query strings easier: `GuzzleHttp\Psr7\parse_query` and + `GuzzleHttp\Psr7\build_query`. +- Guzzle no longer has a dependency on RingPHP. Due to the use of a middleware + system based on PSR-7, using RingPHP and it's middleware system as well adds + more complexity than the benefits it provides. All HTTP handlers that were + present in RingPHP have been modified to work directly with PSR-7 messages + and placed in the `GuzzleHttp\Handler` namespace. This significantly reduces + complexity in Guzzle, removes a dependency, and improves performance. RingPHP + will be maintained for Guzzle 5 support, but will no longer be a part of + Guzzle 6. +- As Guzzle now uses a middleware based systems the event system and RingPHP + integration has been removed. Note: while the event system has been removed, + it is possible to add your own type of event system that is powered by the + middleware system. + - Removed the `Event` namespace. + - Removed the `Subscriber` namespace. + - Removed `Transaction` class + - Removed `RequestFsm` + - Removed `RingBridge` + - `GuzzleHttp\Subscriber\Cookie` is now provided by + `GuzzleHttp\Middleware::cookies` + - `GuzzleHttp\Subscriber\HttpError` is now provided by + `GuzzleHttp\Middleware::httpError` + - `GuzzleHttp\Subscriber\History` is now provided by + `GuzzleHttp\Middleware::history` + - `GuzzleHttp\Subscriber\Mock` is now provided by + `GuzzleHttp\Handler\MockHandler` + - `GuzzleHttp\Subscriber\Prepare` is now provided by + `GuzzleHttp\PrepareBodyMiddleware` + - `GuzzleHttp\Subscriber\Redirect` is now provided by + `GuzzleHttp\RedirectMiddleware` +- Guzzle now uses `Psr\Http\Message\UriInterface` (implements in + `GuzzleHttp\Psr7\Uri`) for URI support. `GuzzleHttp\Url` is now gone. +- Static functions in `GuzzleHttp\Utils` have been moved to namespaced + functions under the `GuzzleHttp` namespace. This requires either a Composer + based autoloader or you to include functions.php. +- `GuzzleHttp\ClientInterface::getDefaultOption` has been renamed to + `GuzzleHttp\ClientInterface::getConfig`. +- `GuzzleHttp\ClientInterface::setDefaultOption` has been removed. +- The `json` and `xml` methods of response objects has been removed. With the + migration to strictly adhering to PSR-7 as the interface for Guzzle messages, + adding methods to message interfaces would actually require Guzzle messages + to extend from PSR-7 messages rather then work with them directly. + +## Migrating to middleware + +The change to PSR-7 unfortunately required significant refactoring to Guzzle +due to the fact that PSR-7 messages are immutable. Guzzle 5 relied on an event +system from plugins. The event system relied on mutability of HTTP messages and +side effects in order to work. With immutable messages, you have to change your +workflow to become more about either returning a value (e.g., functional +middlewares) or setting a value on an object. Guzzle v6 has chosen the +functional middleware approach. + +Instead of using the event system to listen for things like the `before` event, +you now create a stack based middleware function that intercepts a request on +the way in and the promise of the response on the way out. This is a much +simpler and more predictable approach than the event system and works nicely +with PSR-7 middleware. Due to the use of promises, the middleware system is +also asynchronous. + +v5: + +```php +use GuzzleHttp\Event\BeforeEvent; +$client = new GuzzleHttp\Client(); +// Get the emitter and listen to the before event. +$client->getEmitter()->on('before', function (BeforeEvent $e) { + // Guzzle v5 events relied on mutation + $e->getRequest()->setHeader('X-Foo', 'Bar'); +}); +``` + +v6: + +In v6, you can modify the request before it is sent using the `mapRequest` +middleware. The idiomatic way in v6 to modify the request/response lifecycle is +to setup a handler middleware stack up front and inject the handler into a +client. + +```php +use GuzzleHttp\Middleware; +// Create a handler stack that has all of the default middlewares attached +$handler = GuzzleHttp\HandlerStack::create(); +// Push the handler onto the handler stack +$handler->push(Middleware::mapRequest(function (RequestInterface $request) { + // Notice that we have to return a request object + return $request->withHeader('X-Foo', 'Bar'); +})); +// Inject the handler into the client +$client = new GuzzleHttp\Client(['handler' => $handler]); +``` + +## POST Requests + +This version added the [`form_params`](http://guzzle.readthedocs.org/en/latest/request-options.html#form_params) +and `multipart` request options. `form_params` is an associative array of +strings or array of strings and is used to serialize an +`application/x-www-form-urlencoded` POST request. The +[`multipart`](http://guzzle.readthedocs.org/en/latest/request-options.html#multipart) +option is now used to send a multipart/form-data POST request. + +`GuzzleHttp\Post\PostFile` has been removed. Use the `multipart` option to add +POST files to a multipart/form-data request. + +The `body` option no longer accepts an array to send POST requests. Please use +`multipart` or `form_params` instead. + +The `base_url` option has been renamed to `base_uri`. + +4.x to 5.0 +---------- + +## Rewritten Adapter Layer + +Guzzle now uses [RingPHP](http://ringphp.readthedocs.org/en/latest) to send +HTTP requests. The `adapter` option in a `GuzzleHttp\Client` constructor +is still supported, but it has now been renamed to `handler`. Instead of +passing a `GuzzleHttp\Adapter\AdapterInterface`, you must now pass a PHP +`callable` that follows the RingPHP specification. + +## Removed Fluent Interfaces + +[Fluent interfaces were removed](http://ocramius.github.io/blog/fluent-interfaces-are-evil) +from the following classes: + +- `GuzzleHttp\Collection` +- `GuzzleHttp\Url` +- `GuzzleHttp\Query` +- `GuzzleHttp\Post\PostBody` +- `GuzzleHttp\Cookie\SetCookie` + +## Removed functions.php + +Removed "functions.php", so that Guzzle is truly PSR-4 compliant. The following +functions can be used as replacements. + +- `GuzzleHttp\json_decode` -> `GuzzleHttp\Utils::jsonDecode` +- `GuzzleHttp\get_path` -> `GuzzleHttp\Utils::getPath` +- `GuzzleHttp\Utils::setPath` -> `GuzzleHttp\set_path` +- `GuzzleHttp\Pool::batch` -> `GuzzleHttp\batch`. This function is, however, + deprecated in favor of using `GuzzleHttp\Pool::batch()`. + +The "procedural" global client has been removed with no replacement (e.g., +`GuzzleHttp\get()`, `GuzzleHttp\post()`, etc.). Use a `GuzzleHttp\Client` +object as a replacement. + +## `throwImmediately` has been removed + +The concept of "throwImmediately" has been removed from exceptions and error +events. This control mechanism was used to stop a transfer of concurrent +requests from completing. This can now be handled by throwing the exception or +by cancelling a pool of requests or each outstanding future request +individually. + +## headers event has been removed + +Removed the "headers" event. This event was only useful for changing the +body a response once the headers of the response were known. You can implement +a similar behavior in a number of ways. One example might be to use a +FnStream that has access to the transaction being sent. For example, when the +first byte is written, you could check if the response headers match your +expectations, and if so, change the actual stream body that is being +written to. + +## Updates to HTTP Messages + +Removed the `asArray` parameter from +`GuzzleHttp\Message\MessageInterface::getHeader`. If you want to get a header +value as an array, then use the newly added `getHeaderAsArray()` method of +`MessageInterface`. This change makes the Guzzle interfaces compatible with +the PSR-7 interfaces. + +3.x to 4.0 +---------- + +## Overarching changes: + +- Now requires PHP 5.4 or greater. +- No longer requires cURL to send requests. +- Guzzle no longer wraps every exception it throws. Only exceptions that are + recoverable are now wrapped by Guzzle. +- Various namespaces have been removed or renamed. +- No longer requiring the Symfony EventDispatcher. A custom event dispatcher + based on the Symfony EventDispatcher is + now utilized in `GuzzleHttp\Event\EmitterInterface` (resulting in significant + speed and functionality improvements). + +Changes per Guzzle 3.x namespace are described below. + +## Batch + +The `Guzzle\Batch` namespace has been removed. This is best left to +third-parties to implement on top of Guzzle's core HTTP library. + +## Cache + +The `Guzzle\Cache` namespace has been removed. (Todo: No suitable replacement +has been implemented yet, but hoping to utilize a PSR cache interface). + +## Common + +- Removed all of the wrapped exceptions. It's better to use the standard PHP + library for unrecoverable exceptions. +- `FromConfigInterface` has been removed. +- `Guzzle\Common\Version` has been removed. The VERSION constant can be found + at `GuzzleHttp\ClientInterface::VERSION`. + +### Collection + +- `getAll` has been removed. Use `toArray` to convert a collection to an array. +- `inject` has been removed. +- `keySearch` has been removed. +- `getPath` no longer supports wildcard expressions. Use something better like + JMESPath for this. +- `setPath` now supports appending to an existing array via the `[]` notation. + +### Events + +Guzzle no longer requires Symfony's EventDispatcher component. Guzzle now uses +`GuzzleHttp\Event\Emitter`. + +- `Symfony\Component\EventDispatcher\EventDispatcherInterface` is replaced by + `GuzzleHttp\Event\EmitterInterface`. +- `Symfony\Component\EventDispatcher\EventDispatcher` is replaced by + `GuzzleHttp\Event\Emitter`. +- `Symfony\Component\EventDispatcher\Event` is replaced by + `GuzzleHttp\Event\Event`, and Guzzle now has an EventInterface in + `GuzzleHttp\Event\EventInterface`. +- `AbstractHasDispatcher` has moved to a trait, `HasEmitterTrait`, and + `HasDispatcherInterface` has moved to `HasEmitterInterface`. Retrieving the + event emitter of a request, client, etc. now uses the `getEmitter` method + rather than the `getDispatcher` method. + +#### Emitter + +- Use the `once()` method to add a listener that automatically removes itself + the first time it is invoked. +- Use the `listeners()` method to retrieve a list of event listeners rather than + the `getListeners()` method. +- Use `emit()` instead of `dispatch()` to emit an event from an emitter. +- Use `attach()` instead of `addSubscriber()` and `detach()` instead of + `removeSubscriber()`. + +```php +$mock = new Mock(); +// 3.x +$request->getEventDispatcher()->addSubscriber($mock); +$request->getEventDispatcher()->removeSubscriber($mock); +// 4.x +$request->getEmitter()->attach($mock); +$request->getEmitter()->detach($mock); +``` + +Use the `on()` method to add a listener rather than the `addListener()` method. + +```php +// 3.x +$request->getEventDispatcher()->addListener('foo', function (Event $event) { /* ... */ } ); +// 4.x +$request->getEmitter()->on('foo', function (Event $event, $name) { /* ... */ } ); +``` + +## Http + +### General changes + +- The cacert.pem certificate has been moved to `src/cacert.pem`. +- Added the concept of adapters that are used to transfer requests over the + wire. +- Simplified the event system. +- Sending requests in parallel is still possible, but batching is no longer a + concept of the HTTP layer. Instead, you must use the `complete` and `error` + events to asynchronously manage parallel request transfers. +- `Guzzle\Http\Url` has moved to `GuzzleHttp\Url`. +- `Guzzle\Http\QueryString` has moved to `GuzzleHttp\Query`. +- QueryAggregators have been rewritten so that they are simply callable + functions. +- `GuzzleHttp\StaticClient` has been removed. Use the functions provided in + `functions.php` for an easy to use static client instance. +- Exceptions in `GuzzleHttp\Exception` have been updated to all extend from + `GuzzleHttp\Exception\TransferException`. + +### Client + +Calling methods like `get()`, `post()`, `head()`, etc. no longer create and +return a request, but rather creates a request, sends the request, and returns +the response. + +```php +// 3.0 +$request = $client->get('/'); +$response = $request->send(); + +// 4.0 +$response = $client->get('/'); + +// or, to mirror the previous behavior +$request = $client->createRequest('GET', '/'); +$response = $client->send($request); +``` + +`GuzzleHttp\ClientInterface` has changed. + +- The `send` method no longer accepts more than one request. Use `sendAll` to + send multiple requests in parallel. +- `setUserAgent()` has been removed. Use a default request option instead. You + could, for example, do something like: + `$client->setConfig('defaults/headers/User-Agent', 'Foo/Bar ' . $client::getDefaultUserAgent())`. +- `setSslVerification()` has been removed. Use default request options instead, + like `$client->setConfig('defaults/verify', true)`. + +`GuzzleHttp\Client` has changed. + +- The constructor now accepts only an associative array. You can include a + `base_url` string or array to use a URI template as the base URL of a client. + You can also specify a `defaults` key that is an associative array of default + request options. You can pass an `adapter` to use a custom adapter, + `batch_adapter` to use a custom adapter for sending requests in parallel, or + a `message_factory` to change the factory used to create HTTP requests and + responses. +- The client no longer emits a `client.create_request` event. +- Creating requests with a client no longer automatically utilize a URI + template. You must pass an array into a creational method (e.g., + `createRequest`, `get`, `put`, etc.) in order to expand a URI template. + +### Messages + +Messages no longer have references to their counterparts (i.e., a request no +longer has a reference to it's response, and a response no loger has a +reference to its request). This association is now managed through a +`GuzzleHttp\Adapter\TransactionInterface` object. You can get references to +these transaction objects using request events that are emitted over the +lifecycle of a request. + +#### Requests with a body + +- `GuzzleHttp\Message\EntityEnclosingRequest` and + `GuzzleHttp\Message\EntityEnclosingRequestInterface` have been removed. The + separation between requests that contain a body and requests that do not + contain a body has been removed, and now `GuzzleHttp\Message\RequestInterface` + handles both use cases. +- Any method that previously accepts a `GuzzleHttp\Response` object now accept a + `GuzzleHttp\Message\ResponseInterface`. +- `GuzzleHttp\Message\RequestFactoryInterface` has been renamed to + `GuzzleHttp\Message\MessageFactoryInterface`. This interface is used to create + both requests and responses and is implemented in + `GuzzleHttp\Message\MessageFactory`. +- POST field and file methods have been removed from the request object. You + must now use the methods made available to `GuzzleHttp\Post\PostBodyInterface` + to control the format of a POST body. Requests that are created using a + standard `GuzzleHttp\Message\MessageFactoryInterface` will automatically use + a `GuzzleHttp\Post\PostBody` body if the body was passed as an array or if + the method is POST and no body is provided. + +```php +$request = $client->createRequest('POST', '/'); +$request->getBody()->setField('foo', 'bar'); +$request->getBody()->addFile(new PostFile('file_key', fopen('/path/to/content', 'r'))); +``` + +#### Headers + +- `GuzzleHttp\Message\Header` has been removed. Header values are now simply + represented by an array of values or as a string. Header values are returned + as a string by default when retrieving a header value from a message. You can + pass an optional argument of `true` to retrieve a header value as an array + of strings instead of a single concatenated string. +- `GuzzleHttp\PostFile` and `GuzzleHttp\PostFileInterface` have been moved to + `GuzzleHttp\Post`. This interface has been simplified and now allows the + addition of arbitrary headers. +- Custom headers like `GuzzleHttp\Message\Header\Link` have been removed. Most + of the custom headers are now handled separately in specific + subscribers/plugins, and `GuzzleHttp\Message\HeaderValues::parseParams()` has + been updated to properly handle headers that contain parameters (like the + `Link` header). + +#### Responses + +- `GuzzleHttp\Message\Response::getInfo()` and + `GuzzleHttp\Message\Response::setInfo()` have been removed. Use the event + system to retrieve this type of information. +- `GuzzleHttp\Message\Response::getRawHeaders()` has been removed. +- `GuzzleHttp\Message\Response::getMessage()` has been removed. +- `GuzzleHttp\Message\Response::calculateAge()` and other cache specific + methods have moved to the CacheSubscriber. +- Header specific helper functions like `getContentMd5()` have been removed. + Just use `getHeader('Content-MD5')` instead. +- `GuzzleHttp\Message\Response::setRequest()` and + `GuzzleHttp\Message\Response::getRequest()` have been removed. Use the event + system to work with request and response objects as a transaction. +- `GuzzleHttp\Message\Response::getRedirectCount()` has been removed. Use the + Redirect subscriber instead. +- `GuzzleHttp\Message\Response::isSuccessful()` and other related methods have + been removed. Use `getStatusCode()` instead. + +#### Streaming responses + +Streaming requests can now be created by a client directly, returning a +`GuzzleHttp\Message\ResponseInterface` object that contains a body stream +referencing an open PHP HTTP stream. + +```php +// 3.0 +use Guzzle\Stream\PhpStreamRequestFactory; +$request = $client->get('/'); +$factory = new PhpStreamRequestFactory(); +$stream = $factory->fromRequest($request); +$data = $stream->read(1024); + +// 4.0 +$response = $client->get('/', ['stream' => true]); +// Read some data off of the stream in the response body +$data = $response->getBody()->read(1024); +``` + +#### Redirects + +The `configureRedirects()` method has been removed in favor of a +`allow_redirects` request option. + +```php +// Standard redirects with a default of a max of 5 redirects +$request = $client->createRequest('GET', '/', ['allow_redirects' => true]); + +// Strict redirects with a custom number of redirects +$request = $client->createRequest('GET', '/', [ + 'allow_redirects' => ['max' => 5, 'strict' => true] +]); +``` + +#### EntityBody + +EntityBody interfaces and classes have been removed or moved to +`GuzzleHttp\Stream`. All classes and interfaces that once required +`GuzzleHttp\EntityBodyInterface` now require +`GuzzleHttp\Stream\StreamInterface`. Creating a new body for a request no +longer uses `GuzzleHttp\EntityBody::factory` but now uses +`GuzzleHttp\Stream\Stream::factory` or even better: +`GuzzleHttp\Stream\create()`. + +- `Guzzle\Http\EntityBodyInterface` is now `GuzzleHttp\Stream\StreamInterface` +- `Guzzle\Http\EntityBody` is now `GuzzleHttp\Stream\Stream` +- `Guzzle\Http\CachingEntityBody` is now `GuzzleHttp\Stream\CachingStream` +- `Guzzle\Http\ReadLimitEntityBody` is now `GuzzleHttp\Stream\LimitStream` +- `Guzzle\Http\IoEmittyinEntityBody` has been removed. + +#### Request lifecycle events + +Requests previously submitted a large number of requests. The number of events +emitted over the lifecycle of a request has been significantly reduced to make +it easier to understand how to extend the behavior of a request. All events +emitted during the lifecycle of a request now emit a custom +`GuzzleHttp\Event\EventInterface` object that contains context providing +methods and a way in which to modify the transaction at that specific point in +time (e.g., intercept the request and set a response on the transaction). + +- `request.before_send` has been renamed to `before` and now emits a + `GuzzleHttp\Event\BeforeEvent` +- `request.complete` has been renamed to `complete` and now emits a + `GuzzleHttp\Event\CompleteEvent`. +- `request.sent` has been removed. Use `complete`. +- `request.success` has been removed. Use `complete`. +- `error` is now an event that emits a `GuzzleHttp\Event\ErrorEvent`. +- `request.exception` has been removed. Use `error`. +- `request.receive.status_line` has been removed. +- `curl.callback.progress` has been removed. Use a custom `StreamInterface` to + maintain a status update. +- `curl.callback.write` has been removed. Use a custom `StreamInterface` to + intercept writes. +- `curl.callback.read` has been removed. Use a custom `StreamInterface` to + intercept reads. + +`headers` is a new event that is emitted after the response headers of a +request have been received before the body of the response is downloaded. This +event emits a `GuzzleHttp\Event\HeadersEvent`. + +You can intercept a request and inject a response using the `intercept()` event +of a `GuzzleHttp\Event\BeforeEvent`, `GuzzleHttp\Event\CompleteEvent`, and +`GuzzleHttp\Event\ErrorEvent` event. + +See: http://docs.guzzlephp.org/en/latest/events.html + +## Inflection + +The `Guzzle\Inflection` namespace has been removed. This is not a core concern +of Guzzle. + +## Iterator + +The `Guzzle\Iterator` namespace has been removed. + +- `Guzzle\Iterator\AppendIterator`, `Guzzle\Iterator\ChunkedIterator`, and + `Guzzle\Iterator\MethodProxyIterator` are nice, but not a core requirement of + Guzzle itself. +- `Guzzle\Iterator\FilterIterator` is no longer needed because an equivalent + class is shipped with PHP 5.4. +- `Guzzle\Iterator\MapIterator` is not really needed when using PHP 5.5 because + it's easier to just wrap an iterator in a generator that maps values. + +For a replacement of these iterators, see https://github.com/nikic/iter + +## Log + +The LogPlugin has moved to https://github.com/guzzle/log-subscriber. The +`Guzzle\Log` namespace has been removed. Guzzle now relies on +`Psr\Log\LoggerInterface` for all logging. The MessageFormatter class has been +moved to `GuzzleHttp\Subscriber\Log\Formatter`. + +## Parser + +The `Guzzle\Parser` namespace has been removed. This was previously used to +make it possible to plug in custom parsers for cookies, messages, URI +templates, and URLs; however, this level of complexity is not needed in Guzzle +so it has been removed. + +- Cookie: Cookie parsing logic has been moved to + `GuzzleHttp\Cookie\SetCookie::fromString`. +- Message: Message parsing logic for both requests and responses has been moved + to `GuzzleHttp\Message\MessageFactory::fromMessage`. Message parsing is only + used in debugging or deserializing messages, so it doesn't make sense for + Guzzle as a library to add this level of complexity to parsing messages. +- UriTemplate: URI template parsing has been moved to + `GuzzleHttp\UriTemplate`. The Guzzle library will automatically use the PECL + URI template library if it is installed. +- Url: URL parsing is now performed in `GuzzleHttp\Url::fromString` (previously + it was `Guzzle\Http\Url::factory()`). If custom URL parsing is necessary, + then developers are free to subclass `GuzzleHttp\Url`. + +## Plugin + +The `Guzzle\Plugin` namespace has been renamed to `GuzzleHttp\Subscriber`. +Several plugins are shipping with the core Guzzle library under this namespace. + +- `GuzzleHttp\Subscriber\Cookie`: Replaces the old CookiePlugin. Cookie jar + code has moved to `GuzzleHttp\Cookie`. +- `GuzzleHttp\Subscriber\History`: Replaces the old HistoryPlugin. +- `GuzzleHttp\Subscriber\HttpError`: Throws errors when a bad HTTP response is + received. +- `GuzzleHttp\Subscriber\Mock`: Replaces the old MockPlugin. +- `GuzzleHttp\Subscriber\Prepare`: Prepares the body of a request just before + sending. This subscriber is attached to all requests by default. +- `GuzzleHttp\Subscriber\Redirect`: Replaces the RedirectPlugin. + +The following plugins have been removed (third-parties are free to re-implement +these if needed): + +- `GuzzleHttp\Plugin\Async` has been removed. +- `GuzzleHttp\Plugin\CurlAuth` has been removed. +- `GuzzleHttp\Plugin\ErrorResponse\ErrorResponsePlugin` has been removed. This + functionality should instead be implemented with event listeners that occur + after normal response parsing occurs in the guzzle/command package. + +The following plugins are not part of the core Guzzle package, but are provided +in separate repositories: + +- `Guzzle\Http\Plugin\BackoffPlugin` has been rewritten to be much simpler + to build custom retry policies using simple functions rather than various + chained classes. See: https://github.com/guzzle/retry-subscriber +- `Guzzle\Http\Plugin\Cache\CachePlugin` has moved to + https://github.com/guzzle/cache-subscriber +- `Guzzle\Http\Plugin\Log\LogPlugin` has moved to + https://github.com/guzzle/log-subscriber +- `Guzzle\Http\Plugin\Md5\Md5Plugin` has moved to + https://github.com/guzzle/message-integrity-subscriber +- `Guzzle\Http\Plugin\Mock\MockPlugin` has moved to + `GuzzleHttp\Subscriber\MockSubscriber`. +- `Guzzle\Http\Plugin\Oauth\OauthPlugin` has moved to + https://github.com/guzzle/oauth-subscriber + +## Service + +The service description layer of Guzzle has moved into two separate packages: + +- http://github.com/guzzle/command Provides a high level abstraction over web + services by representing web service operations using commands. +- http://github.com/guzzle/guzzle-services Provides an implementation of + guzzle/command that provides request serialization and response parsing using + Guzzle service descriptions. + +## Stream + +Stream have moved to a separate package available at +https://github.com/guzzle/streams. + +`Guzzle\Stream\StreamInterface` has been given a large update to cleanly take +on the responsibilities of `Guzzle\Http\EntityBody` and +`Guzzle\Http\EntityBodyInterface` now that they have been removed. The number +of methods implemented by the `StreamInterface` has been drastically reduced to +allow developers to more easily extend and decorate stream behavior. + +## Removed methods from StreamInterface + +- `getStream` and `setStream` have been removed to better encapsulate streams. +- `getMetadata` and `setMetadata` have been removed in favor of + `GuzzleHttp\Stream\MetadataStreamInterface`. +- `getWrapper`, `getWrapperData`, `getStreamType`, and `getUri` have all been + removed. This data is accessible when + using streams that implement `GuzzleHttp\Stream\MetadataStreamInterface`. +- `rewind` has been removed. Use `seek(0)` for a similar behavior. + +## Renamed methods + +- `detachStream` has been renamed to `detach`. +- `feof` has been renamed to `eof`. +- `ftell` has been renamed to `tell`. +- `readLine` has moved from an instance method to a static class method of + `GuzzleHttp\Stream\Stream`. + +## Metadata streams + +`GuzzleHttp\Stream\MetadataStreamInterface` has been added to denote streams +that contain additional metadata accessible via `getMetadata()`. +`GuzzleHttp\Stream\StreamInterface::getMetadata` and +`GuzzleHttp\Stream\StreamInterface::setMetadata` have been removed. + +## StreamRequestFactory + +The entire concept of the StreamRequestFactory has been removed. The way this +was used in Guzzle 3 broke the actual interface of sending streaming requests +(instead of getting back a Response, you got a StreamInterface). Streaming +PHP requests are now implemented through the `GuzzleHttp\Adapter\StreamAdapter`. + +3.6 to 3.7 +---------- + +### Deprecations + +- You can now enable E_USER_DEPRECATED warnings to see if you are using any deprecated methods.: + +```php +\Guzzle\Common\Version::$emitWarnings = true; +``` + +The following APIs and options have been marked as deprecated: + +- Marked `Guzzle\Http\Message\Request::isResponseBodyRepeatable()` as deprecated. Use `$request->getResponseBody()->isRepeatable()` instead. +- Marked `Guzzle\Http\Message\Request::canCache()` as deprecated. Use `Guzzle\Plugin\Cache\DefaultCanCacheStrategy->canCacheRequest()` instead. +- Marked `Guzzle\Http\Message\Request::canCache()` as deprecated. Use `Guzzle\Plugin\Cache\DefaultCanCacheStrategy->canCacheRequest()` instead. +- Marked `Guzzle\Http\Message\Request::setIsRedirect()` as deprecated. Use the HistoryPlugin instead. +- Marked `Guzzle\Http\Message\Request::isRedirect()` as deprecated. Use the HistoryPlugin instead. +- Marked `Guzzle\Cache\CacheAdapterFactory::factory()` as deprecated +- Marked `Guzzle\Service\Client::enableMagicMethods()` as deprecated. Magic methods can no longer be disabled on a Guzzle\Service\Client. +- Marked `Guzzle\Parser\Url\UrlParser` as deprecated. Just use PHP's `parse_url()` and percent encode your UTF-8. +- Marked `Guzzle\Common\Collection::inject()` as deprecated. +- Marked `Guzzle\Plugin\CurlAuth\CurlAuthPlugin` as deprecated. Use + `$client->getConfig()->setPath('request.options/auth', array('user', 'pass', 'Basic|Digest|NTLM|Any'));` or + `$client->setDefaultOption('auth', array('user', 'pass', 'Basic|Digest|NTLM|Any'));` + +3.7 introduces `request.options` as a parameter for a client configuration and as an optional argument to all creational +request methods. When paired with a client's configuration settings, these options allow you to specify default settings +for various aspects of a request. Because these options make other previous configuration options redundant, several +configuration options and methods of a client and AbstractCommand have been deprecated. + +- Marked `Guzzle\Service\Client::getDefaultHeaders()` as deprecated. Use `$client->getDefaultOption('headers')`. +- Marked `Guzzle\Service\Client::setDefaultHeaders()` as deprecated. Use `$client->setDefaultOption('headers/{header_name}', 'value')`. +- Marked 'request.params' for `Guzzle\Http\Client` as deprecated. Use `$client->setDefaultOption('params/{param_name}', 'value')` +- Marked 'command.headers', 'command.response_body' and 'command.on_complete' as deprecated for AbstractCommand. These will work through Guzzle 4.0 + + $command = $client->getCommand('foo', array( + 'command.headers' => array('Test' => '123'), + 'command.response_body' => '/path/to/file' + )); + + // Should be changed to: + + $command = $client->getCommand('foo', array( + 'command.request_options' => array( + 'headers' => array('Test' => '123'), + 'save_as' => '/path/to/file' + ) + )); + +### Interface changes + +Additions and changes (you will need to update any implementations or subclasses you may have created): + +- Added an `$options` argument to the end of the following methods of `Guzzle\Http\ClientInterface`: + createRequest, head, delete, put, patch, post, options, prepareRequest +- Added an `$options` argument to the end of `Guzzle\Http\Message\Request\RequestFactoryInterface::createRequest()` +- Added an `applyOptions()` method to `Guzzle\Http\Message\Request\RequestFactoryInterface` +- Changed `Guzzle\Http\ClientInterface::get($uri = null, $headers = null, $body = null)` to + `Guzzle\Http\ClientInterface::get($uri = null, $headers = null, $options = array())`. You can still pass in a + resource, string, or EntityBody into the $options parameter to specify the download location of the response. +- Changed `Guzzle\Common\Collection::__construct($data)` to no longer accepts a null value for `$data` but a + default `array()` +- Added `Guzzle\Stream\StreamInterface::isRepeatable` +- Made `Guzzle\Http\Client::expandTemplate` and `getUriTemplate` protected methods. + +The following methods were removed from interfaces. All of these methods are still available in the concrete classes +that implement them, but you should update your code to use alternative methods: + +- Removed `Guzzle\Http\ClientInterface::setDefaultHeaders(). Use + `$client->getConfig()->setPath('request.options/headers/{header_name}', 'value')`. or + `$client->getConfig()->setPath('request.options/headers', array('header_name' => 'value'))` or + `$client->setDefaultOption('headers/{header_name}', 'value')`. or + `$client->setDefaultOption('headers', array('header_name' => 'value'))`. +- Removed `Guzzle\Http\ClientInterface::getDefaultHeaders(). Use `$client->getConfig()->getPath('request.options/headers')`. +- Removed `Guzzle\Http\ClientInterface::expandTemplate()`. This is an implementation detail. +- Removed `Guzzle\Http\ClientInterface::setRequestFactory()`. This is an implementation detail. +- Removed `Guzzle\Http\ClientInterface::getCurlMulti()`. This is a very specific implementation detail. +- Removed `Guzzle\Http\Message\RequestInterface::canCache`. Use the CachePlugin. +- Removed `Guzzle\Http\Message\RequestInterface::setIsRedirect`. Use the HistoryPlugin. +- Removed `Guzzle\Http\Message\RequestInterface::isRedirect`. Use the HistoryPlugin. + +### Cache plugin breaking changes + +- CacheKeyProviderInterface and DefaultCacheKeyProvider are no longer used. All of this logic is handled in a + CacheStorageInterface. These two objects and interface will be removed in a future version. +- Always setting X-cache headers on cached responses +- Default cache TTLs are now handled by the CacheStorageInterface of a CachePlugin +- `CacheStorageInterface::cache($key, Response $response, $ttl = null)` has changed to `cache(RequestInterface + $request, Response $response);` +- `CacheStorageInterface::fetch($key)` has changed to `fetch(RequestInterface $request);` +- `CacheStorageInterface::delete($key)` has changed to `delete(RequestInterface $request);` +- Added `CacheStorageInterface::purge($url)` +- `DefaultRevalidation::__construct(CacheKeyProviderInterface $cacheKey, CacheStorageInterface $cache, CachePlugin + $plugin)` has changed to `DefaultRevalidation::__construct(CacheStorageInterface $cache, + CanCacheStrategyInterface $canCache = null)` +- Added `RevalidationInterface::shouldRevalidate(RequestInterface $request, Response $response)` + +3.5 to 3.6 +---------- + +* Mixed casing of headers are now forced to be a single consistent casing across all values for that header. +* Messages internally use a HeaderCollection object to delegate handling case-insensitive header resolution +* Removed the whole changedHeader() function system of messages because all header changes now go through addHeader(). + For example, setHeader() first removes the header using unset on a HeaderCollection and then calls addHeader(). + Keeping the Host header and URL host in sync is now handled by overriding the addHeader method in Request. +* Specific header implementations can be created for complex headers. When a message creates a header, it uses a + HeaderFactory which can map specific headers to specific header classes. There is now a Link header and + CacheControl header implementation. +* Moved getLinks() from Response to just be used on a Link header object. + +If you previously relied on Guzzle\Http\Message\Header::raw(), then you will need to update your code to use the +HeaderInterface (e.g. toArray(), getAll(), etc.). + +### Interface changes + +* Removed from interface: Guzzle\Http\ClientInterface::setUriTemplate +* Removed from interface: Guzzle\Http\ClientInterface::setCurlMulti() +* Removed Guzzle\Http\Message\Request::receivedRequestHeader() and implemented this functionality in + Guzzle\Http\Curl\RequestMediator +* Removed the optional $asString parameter from MessageInterface::getHeader(). Just cast the header to a string. +* Removed the optional $tryChunkedTransfer option from Guzzle\Http\Message\EntityEnclosingRequestInterface +* Removed the $asObjects argument from Guzzle\Http\Message\MessageInterface::getHeaders() + +### Removed deprecated functions + +* Removed Guzzle\Parser\ParserRegister::get(). Use getParser() +* Removed Guzzle\Parser\ParserRegister::set(). Use registerParser(). + +### Deprecations + +* The ability to case-insensitively search for header values +* Guzzle\Http\Message\Header::hasExactHeader +* Guzzle\Http\Message\Header::raw. Use getAll() +* Deprecated cache control specific methods on Guzzle\Http\Message\AbstractMessage. Use the CacheControl header object + instead. + +### Other changes + +* All response header helper functions return a string rather than mixing Header objects and strings inconsistently +* Removed cURL blacklist support. This is no longer necessary now that Expect, Accept, etc. are managed by Guzzle + directly via interfaces +* Removed the injecting of a request object onto a response object. The methods to get and set a request still exist + but are a no-op until removed. +* Most classes that used to require a `Guzzle\Service\Command\CommandInterface` typehint now request a + `Guzzle\Service\Command\ArrayCommandInterface`. +* Added `Guzzle\Http\Message\RequestInterface::startResponse()` to the RequestInterface to handle injecting a response + on a request while the request is still being transferred +* `Guzzle\Service\Command\CommandInterface` now extends from ToArrayInterface and ArrayAccess + +3.3 to 3.4 +---------- + +Base URLs of a client now follow the rules of http://tools.ietf.org/html/rfc3986#section-5.2.2 when merging URLs. + +3.2 to 3.3 +---------- + +### Response::getEtag() quote stripping removed + +`Guzzle\Http\Message\Response::getEtag()` no longer strips quotes around the ETag response header + +### Removed `Guzzle\Http\Utils` + +The `Guzzle\Http\Utils` class was removed. This class was only used for testing. + +### Stream wrapper and type + +`Guzzle\Stream\Stream::getWrapper()` and `Guzzle\Stream\Stream::getStreamType()` are no longer converted to lowercase. + +### curl.emit_io became emit_io + +Emitting IO events from a RequestMediator is now a parameter that must be set in a request's curl options using the +'emit_io' key. This was previously set under a request's parameters using 'curl.emit_io' + +3.1 to 3.2 +---------- + +### CurlMulti is no longer reused globally + +Before 3.2, the same CurlMulti object was reused globally for each client. This can cause issue where plugins added +to a single client can pollute requests dispatched from other clients. + +If you still wish to reuse the same CurlMulti object with each client, then you can add a listener to the +ServiceBuilder's `service_builder.create_client` event to inject a custom CurlMulti object into each client as it is +created. + +```php +$multi = new Guzzle\Http\Curl\CurlMulti(); +$builder = Guzzle\Service\Builder\ServiceBuilder::factory('/path/to/config.json'); +$builder->addListener('service_builder.create_client', function ($event) use ($multi) { + $event['client']->setCurlMulti($multi); +} +}); +``` + +### No default path + +URLs no longer have a default path value of '/' if no path was specified. + +Before: + +```php +$request = $client->get('http://www.foo.com'); +echo $request->getUrl(); +// >> http://www.foo.com/ +``` + +After: + +```php +$request = $client->get('http://www.foo.com'); +echo $request->getUrl(); +// >> http://www.foo.com +``` + +### Less verbose BadResponseException + +The exception message for `Guzzle\Http\Exception\BadResponseException` no longer contains the full HTTP request and +response information. You can, however, get access to the request and response object by calling `getRequest()` or +`getResponse()` on the exception object. + +### Query parameter aggregation + +Multi-valued query parameters are no longer aggregated using a callback function. `Guzzle\Http\Query` now has a +setAggregator() method that accepts a `Guzzle\Http\QueryAggregator\QueryAggregatorInterface` object. This object is +responsible for handling the aggregation of multi-valued query string variables into a flattened hash. + +2.8 to 3.x +---------- + +### Guzzle\Service\Inspector + +Change `\Guzzle\Service\Inspector::fromConfig` to `\Guzzle\Common\Collection::fromConfig` + +**Before** + +```php +use Guzzle\Service\Inspector; + +class YourClient extends \Guzzle\Service\Client +{ + public static function factory($config = array()) + { + $default = array(); + $required = array('base_url', 'username', 'api_key'); + $config = Inspector::fromConfig($config, $default, $required); + + $client = new self( + $config->get('base_url'), + $config->get('username'), + $config->get('api_key') + ); + $client->setConfig($config); + + $client->setDescription(ServiceDescription::factory(__DIR__ . DIRECTORY_SEPARATOR . 'client.json')); + + return $client; + } +``` + +**After** + +```php +use Guzzle\Common\Collection; + +class YourClient extends \Guzzle\Service\Client +{ + public static function factory($config = array()) + { + $default = array(); + $required = array('base_url', 'username', 'api_key'); + $config = Collection::fromConfig($config, $default, $required); + + $client = new self( + $config->get('base_url'), + $config->get('username'), + $config->get('api_key') + ); + $client->setConfig($config); + + $client->setDescription(ServiceDescription::factory(__DIR__ . DIRECTORY_SEPARATOR . 'client.json')); + + return $client; + } +``` + +### Convert XML Service Descriptions to JSON + +**Before** + +```xml + + + + + + Get a list of groups + + + Uses a search query to get a list of groups + + + + Create a group + + + + + Delete a group by ID + + + + + + + Update a group + + + + + + +``` + +**After** + +```json +{ + "name": "Zendesk REST API v2", + "apiVersion": "2012-12-31", + "description":"Provides access to Zendesk views, groups, tickets, ticket fields, and users", + "operations": { + "list_groups": { + "httpMethod":"GET", + "uri": "groups.json", + "summary": "Get a list of groups" + }, + "search_groups":{ + "httpMethod":"GET", + "uri": "search.json?query=\"{query} type:group\"", + "summary": "Uses a search query to get a list of groups", + "parameters":{ + "query":{ + "location": "uri", + "description":"Zendesk Search Query", + "type": "string", + "required": true + } + } + }, + "create_group": { + "httpMethod":"POST", + "uri": "groups.json", + "summary": "Create a group", + "parameters":{ + "data": { + "type": "array", + "location": "body", + "description":"Group JSON", + "filters": "json_encode", + "required": true + }, + "Content-Type":{ + "type": "string", + "location":"header", + "static": "application/json" + } + } + }, + "delete_group": { + "httpMethod":"DELETE", + "uri": "groups/{id}.json", + "summary": "Delete a group", + "parameters":{ + "id":{ + "location": "uri", + "description":"Group to delete by ID", + "type": "integer", + "required": true + } + } + }, + "get_group": { + "httpMethod":"GET", + "uri": "groups/{id}.json", + "summary": "Get a ticket", + "parameters":{ + "id":{ + "location": "uri", + "description":"Group to get by ID", + "type": "integer", + "required": true + } + } + }, + "update_group": { + "httpMethod":"PUT", + "uri": "groups/{id}.json", + "summary": "Update a group", + "parameters":{ + "id": { + "location": "uri", + "description":"Group to update by ID", + "type": "integer", + "required": true + }, + "data": { + "type": "array", + "location": "body", + "description":"Group JSON", + "filters": "json_encode", + "required": true + }, + "Content-Type":{ + "type": "string", + "location":"header", + "static": "application/json" + } + } + } +} +``` + +### Guzzle\Service\Description\ServiceDescription + +Commands are now called Operations + +**Before** + +```php +use Guzzle\Service\Description\ServiceDescription; + +$sd = new ServiceDescription(); +$sd->getCommands(); // @returns ApiCommandInterface[] +$sd->hasCommand($name); +$sd->getCommand($name); // @returns ApiCommandInterface|null +$sd->addCommand($command); // @param ApiCommandInterface $command +``` + +**After** + +```php +use Guzzle\Service\Description\ServiceDescription; + +$sd = new ServiceDescription(); +$sd->getOperations(); // @returns OperationInterface[] +$sd->hasOperation($name); +$sd->getOperation($name); // @returns OperationInterface|null +$sd->addOperation($operation); // @param OperationInterface $operation +``` + +### Guzzle\Common\Inflection\Inflector + +Namespace is now `Guzzle\Inflection\Inflector` + +### Guzzle\Http\Plugin + +Namespace is now `Guzzle\Plugin`. Many other changes occur within this namespace and are detailed in their own sections below. + +### Guzzle\Http\Plugin\LogPlugin and Guzzle\Common\Log + +Now `Guzzle\Plugin\Log\LogPlugin` and `Guzzle\Log` respectively. + +**Before** + +```php +use Guzzle\Common\Log\ClosureLogAdapter; +use Guzzle\Http\Plugin\LogPlugin; + +/** @var \Guzzle\Http\Client */ +$client; + +// $verbosity is an integer indicating desired message verbosity level +$client->addSubscriber(new LogPlugin(new ClosureLogAdapter(function($m) { echo $m; }, $verbosity = LogPlugin::LOG_VERBOSE); +``` + +**After** + +```php +use Guzzle\Log\ClosureLogAdapter; +use Guzzle\Log\MessageFormatter; +use Guzzle\Plugin\Log\LogPlugin; + +/** @var \Guzzle\Http\Client */ +$client; + +// $format is a string indicating desired message format -- @see MessageFormatter +$client->addSubscriber(new LogPlugin(new ClosureLogAdapter(function($m) { echo $m; }, $format = MessageFormatter::DEBUG_FORMAT); +``` + +### Guzzle\Http\Plugin\CurlAuthPlugin + +Now `Guzzle\Plugin\CurlAuth\CurlAuthPlugin`. + +### Guzzle\Http\Plugin\ExponentialBackoffPlugin + +Now `Guzzle\Plugin\Backoff\BackoffPlugin`, and other changes. + +**Before** + +```php +use Guzzle\Http\Plugin\ExponentialBackoffPlugin; + +$backoffPlugin = new ExponentialBackoffPlugin($maxRetries, array_merge( + ExponentialBackoffPlugin::getDefaultFailureCodes(), array(429) + )); + +$client->addSubscriber($backoffPlugin); +``` + +**After** + +```php +use Guzzle\Plugin\Backoff\BackoffPlugin; +use Guzzle\Plugin\Backoff\HttpBackoffStrategy; + +// Use convenient factory method instead -- see implementation for ideas of what +// you can do with chaining backoff strategies +$backoffPlugin = BackoffPlugin::getExponentialBackoff($maxRetries, array_merge( + HttpBackoffStrategy::getDefaultFailureCodes(), array(429) + )); +$client->addSubscriber($backoffPlugin); +``` + +### Known Issues + +#### [BUG] Accept-Encoding header behavior changed unintentionally. + +(See #217) (Fixed in 09daeb8c666fb44499a0646d655a8ae36456575e) + +In version 2.8 setting the `Accept-Encoding` header would set the CURLOPT_ENCODING option, which permitted cURL to +properly handle gzip/deflate compressed responses from the server. In versions affected by this bug this does not happen. +See issue #217 for a workaround, or use a version containing the fix. diff --git a/vendor/guzzlehttp/guzzle/composer.json b/vendor/guzzlehttp/guzzle/composer.json new file mode 100644 index 00000000..060f1938 --- /dev/null +++ b/vendor/guzzlehttp/guzzle/composer.json @@ -0,0 +1,59 @@ +{ + "name": "guzzlehttp/guzzle", + "type": "library", + "description": "Guzzle is a PHP HTTP client library", + "keywords": [ + "framework", + "http", + "rest", + "web service", + "curl", + "client", + "HTTP client" + ], + "homepage": "http://guzzlephp.org/", + "license": "MIT", + "authors": [ + { + "name": "Michael Dowling", + "email": "mtdowling@gmail.com", + "homepage": "https://github.com/mtdowling" + } + ], + "require": { + "php": ">=5.5", + "ext-json": "*", + "guzzlehttp/promises": "^1.0", + "guzzlehttp/psr7": "^1.6.1" + }, + "require-dev": { + "ext-curl": "*", + "phpunit/phpunit": "^4.8.35 || ^5.7 || ^6.4 || ^7.0", + "psr/log": "^1.1" + }, + "suggest": { + "psr/log": "Required for using the Log middleware", + "ext-intl": "Required for Internationalized Domain Name (IDN) support" + }, + "config": { + "sort-packages": true + }, + "extra": { + "branch-alias": { + "dev-master": "6.5-dev" + } + }, + "autoload": { + "psr-4": { + "GuzzleHttp\\": "src/" + }, + "files": [ + "src/functions_include.php" + ] + }, + "autoload-dev": { + "psr-4": { + "GuzzleHttp\\Tests\\": "tests/" + } + } +} diff --git a/vendor/guzzlehttp/guzzle/src/Client.php b/vendor/guzzlehttp/guzzle/src/Client.php new file mode 100644 index 00000000..7c77c8a7 --- /dev/null +++ b/vendor/guzzlehttp/guzzle/src/Client.php @@ -0,0 +1,511 @@ + 'http://www.foo.com/1.0/', + * 'timeout' => 0, + * 'allow_redirects' => false, + * 'proxy' => '192.168.16.1:10' + * ]); + * + * Client configuration settings include the following options: + * + * - handler: (callable) Function that transfers HTTP requests over the + * wire. The function is called with a Psr7\Http\Message\RequestInterface + * and array of transfer options, and must return a + * GuzzleHttp\Promise\PromiseInterface that is fulfilled with a + * Psr7\Http\Message\ResponseInterface on success. "handler" is a + * constructor only option that cannot be overridden in per/request + * options. If no handler is provided, a default handler will be created + * that enables all of the request options below by attaching all of the + * default middleware to the handler. + * - base_uri: (string|UriInterface) Base URI of the client that is merged + * into relative URIs. Can be a string or instance of UriInterface. + * - **: any request option + * + * @param array $config Client configuration settings. + * + * @see \GuzzleHttp\RequestOptions for a list of available request options. + */ + public function __construct(array $config = []) + { + if (!isset($config['handler'])) { + $config['handler'] = HandlerStack::create(); + } elseif (!is_callable($config['handler'])) { + throw new \InvalidArgumentException('handler must be a callable'); + } + + // Convert the base_uri to a UriInterface + if (isset($config['base_uri'])) { + $config['base_uri'] = Psr7\uri_for($config['base_uri']); + } + + $this->configureDefaults($config); + } + + /** + * @param string $method + * @param array $args + * + * @return Promise\PromiseInterface + */ + public function __call($method, $args) + { + if (count($args) < 1) { + throw new \InvalidArgumentException('Magic request methods require a URI and optional options array'); + } + + $uri = $args[0]; + $opts = isset($args[1]) ? $args[1] : []; + + return substr($method, -5) === 'Async' + ? $this->requestAsync(substr($method, 0, -5), $uri, $opts) + : $this->request($method, $uri, $opts); + } + + /** + * Asynchronously send an HTTP request. + * + * @param array $options Request options to apply to the given + * request and to the transfer. See \GuzzleHttp\RequestOptions. + * + * @return Promise\PromiseInterface + */ + public function sendAsync(RequestInterface $request, array $options = []) + { + // Merge the base URI into the request URI if needed. + $options = $this->prepareDefaults($options); + + return $this->transfer( + $request->withUri($this->buildUri($request->getUri(), $options), $request->hasHeader('Host')), + $options + ); + } + + /** + * Send an HTTP request. + * + * @param array $options Request options to apply to the given + * request and to the transfer. See \GuzzleHttp\RequestOptions. + * + * @return ResponseInterface + * @throws GuzzleException + */ + public function send(RequestInterface $request, array $options = []) + { + $options[RequestOptions::SYNCHRONOUS] = true; + return $this->sendAsync($request, $options)->wait(); + } + + /** + * Create and send an asynchronous HTTP request. + * + * Use an absolute path to override the base path of the client, or a + * relative path to append to the base path of the client. The URL can + * contain the query string as well. Use an array to provide a URL + * template and additional variables to use in the URL template expansion. + * + * @param string $method HTTP method + * @param string|UriInterface $uri URI object or string. + * @param array $options Request options to apply. See \GuzzleHttp\RequestOptions. + * + * @return Promise\PromiseInterface + */ + public function requestAsync($method, $uri = '', array $options = []) + { + $options = $this->prepareDefaults($options); + // Remove request modifying parameter because it can be done up-front. + $headers = isset($options['headers']) ? $options['headers'] : []; + $body = isset($options['body']) ? $options['body'] : null; + $version = isset($options['version']) ? $options['version'] : '1.1'; + // Merge the URI into the base URI. + $uri = $this->buildUri($uri, $options); + if (is_array($body)) { + $this->invalidBody(); + } + $request = new Psr7\Request($method, $uri, $headers, $body, $version); + // Remove the option so that they are not doubly-applied. + unset($options['headers'], $options['body'], $options['version']); + + return $this->transfer($request, $options); + } + + /** + * Create and send an HTTP request. + * + * Use an absolute path to override the base path of the client, or a + * relative path to append to the base path of the client. The URL can + * contain the query string as well. + * + * @param string $method HTTP method. + * @param string|UriInterface $uri URI object or string. + * @param array $options Request options to apply. See \GuzzleHttp\RequestOptions. + * + * @return ResponseInterface + * @throws GuzzleException + */ + public function request($method, $uri = '', array $options = []) + { + $options[RequestOptions::SYNCHRONOUS] = true; + return $this->requestAsync($method, $uri, $options)->wait(); + } + + /** + * Get a client configuration option. + * + * These options include default request options of the client, a "handler" + * (if utilized by the concrete client), and a "base_uri" if utilized by + * the concrete client. + * + * @param string|null $option The config option to retrieve. + * + * @return mixed + */ + public function getConfig($option = null) + { + return $option === null + ? $this->config + : (isset($this->config[$option]) ? $this->config[$option] : null); + } + + /** + * @param string|null $uri + * + * @return UriInterface + */ + private function buildUri($uri, array $config) + { + // for BC we accept null which would otherwise fail in uri_for + $uri = Psr7\uri_for($uri === null ? '' : $uri); + + if (isset($config['base_uri'])) { + $uri = Psr7\UriResolver::resolve(Psr7\uri_for($config['base_uri']), $uri); + } + + if (isset($config['idn_conversion']) && ($config['idn_conversion'] !== false)) { + $idnOptions = ($config['idn_conversion'] === true) ? IDNA_DEFAULT : $config['idn_conversion']; + $uri = _idn_uri_convert($uri, $idnOptions); + } + + return $uri->getScheme() === '' && $uri->getHost() !== '' ? $uri->withScheme('http') : $uri; + } + + /** + * Configures the default options for a client. + * + * @param array $config + * @return void + */ + private function configureDefaults(array $config) + { + $defaults = [ + 'allow_redirects' => RedirectMiddleware::$defaultSettings, + 'http_errors' => true, + 'decode_content' => true, + 'verify' => true, + 'cookies' => false + ]; + + // idn_to_ascii() is a part of ext-intl and might be not available + $defaults['idn_conversion'] = function_exists('idn_to_ascii') + // Old ICU versions don't have this constant, so we are basically stuck (see https://github.com/guzzle/guzzle/pull/2424 + // and https://github.com/guzzle/guzzle/issues/2448 for details) + && ( + defined('INTL_IDNA_VARIANT_UTS46') + || + PHP_VERSION_ID < 70200 + ); + + // Use the standard Linux HTTP_PROXY and HTTPS_PROXY if set. + + // We can only trust the HTTP_PROXY environment variable in a CLI + // process due to the fact that PHP has no reliable mechanism to + // get environment variables that start with "HTTP_". + if (php_sapi_name() === 'cli' && getenv('HTTP_PROXY')) { + $defaults['proxy']['http'] = getenv('HTTP_PROXY'); + } + + if ($proxy = getenv('HTTPS_PROXY')) { + $defaults['proxy']['https'] = $proxy; + } + + if ($noProxy = getenv('NO_PROXY')) { + $cleanedNoProxy = str_replace(' ', '', $noProxy); + $defaults['proxy']['no'] = explode(',', $cleanedNoProxy); + } + + $this->config = $config + $defaults; + + if (!empty($config['cookies']) && $config['cookies'] === true) { + $this->config['cookies'] = new CookieJar(); + } + + // Add the default user-agent header. + if (!isset($this->config['headers'])) { + $this->config['headers'] = ['User-Agent' => default_user_agent()]; + } else { + // Add the User-Agent header if one was not already set. + foreach (array_keys($this->config['headers']) as $name) { + if (strtolower($name) === 'user-agent') { + return; + } + } + $this->config['headers']['User-Agent'] = default_user_agent(); + } + } + + /** + * Merges default options into the array. + * + * @param array $options Options to modify by reference + * + * @return array + */ + private function prepareDefaults(array $options) + { + $defaults = $this->config; + + if (!empty($defaults['headers'])) { + // Default headers are only added if they are not present. + $defaults['_conditional'] = $defaults['headers']; + unset($defaults['headers']); + } + + // Special handling for headers is required as they are added as + // conditional headers and as headers passed to a request ctor. + if (array_key_exists('headers', $options)) { + // Allows default headers to be unset. + if ($options['headers'] === null) { + $defaults['_conditional'] = []; + unset($options['headers']); + } elseif (!is_array($options['headers'])) { + throw new \InvalidArgumentException('headers must be an array'); + } + } + + // Shallow merge defaults underneath options. + $result = $options + $defaults; + + // Remove null values. + foreach ($result as $k => $v) { + if ($v === null) { + unset($result[$k]); + } + } + + return $result; + } + + /** + * Transfers the given request and applies request options. + * + * The URI of the request is not modified and the request options are used + * as-is without merging in default options. + * + * @param array $options See \GuzzleHttp\RequestOptions. + * + * @return Promise\PromiseInterface + */ + private function transfer(RequestInterface $request, array $options) + { + // save_to -> sink + if (isset($options['save_to'])) { + $options['sink'] = $options['save_to']; + unset($options['save_to']); + } + + // exceptions -> http_errors + if (isset($options['exceptions'])) { + $options['http_errors'] = $options['exceptions']; + unset($options['exceptions']); + } + + $request = $this->applyOptions($request, $options); + /** @var HandlerStack $handler */ + $handler = $options['handler']; + + try { + return Promise\promise_for($handler($request, $options)); + } catch (\Exception $e) { + return Promise\rejection_for($e); + } + } + + /** + * Applies the array of request options to a request. + * + * @param RequestInterface $request + * @param array $options + * + * @return RequestInterface + */ + private function applyOptions(RequestInterface $request, array &$options) + { + $modify = [ + 'set_headers' => [], + ]; + + if (isset($options['headers'])) { + $modify['set_headers'] = $options['headers']; + unset($options['headers']); + } + + if (isset($options['form_params'])) { + if (isset($options['multipart'])) { + throw new \InvalidArgumentException('You cannot use ' + . 'form_params and multipart at the same time. Use the ' + . 'form_params option if you want to send application/' + . 'x-www-form-urlencoded requests, and the multipart ' + . 'option to send multipart/form-data requests.'); + } + $options['body'] = http_build_query($options['form_params'], '', '&'); + unset($options['form_params']); + // Ensure that we don't have the header in different case and set the new value. + $options['_conditional'] = Psr7\_caseless_remove(['Content-Type'], $options['_conditional']); + $options['_conditional']['Content-Type'] = 'application/x-www-form-urlencoded'; + } + + if (isset($options['multipart'])) { + $options['body'] = new Psr7\MultipartStream($options['multipart']); + unset($options['multipart']); + } + + if (isset($options['json'])) { + $options['body'] = \GuzzleHttp\json_encode($options['json']); + unset($options['json']); + // Ensure that we don't have the header in different case and set the new value. + $options['_conditional'] = Psr7\_caseless_remove(['Content-Type'], $options['_conditional']); + $options['_conditional']['Content-Type'] = 'application/json'; + } + + if (!empty($options['decode_content']) + && $options['decode_content'] !== true + ) { + // Ensure that we don't have the header in different case and set the new value. + $options['_conditional'] = Psr7\_caseless_remove(['Accept-Encoding'], $options['_conditional']); + $modify['set_headers']['Accept-Encoding'] = $options['decode_content']; + } + + if (isset($options['body'])) { + if (is_array($options['body'])) { + $this->invalidBody(); + } + $modify['body'] = Psr7\stream_for($options['body']); + unset($options['body']); + } + + if (!empty($options['auth']) && is_array($options['auth'])) { + $value = $options['auth']; + $type = isset($value[2]) ? strtolower($value[2]) : 'basic'; + switch ($type) { + case 'basic': + // Ensure that we don't have the header in different case and set the new value. + $modify['set_headers'] = Psr7\_caseless_remove(['Authorization'], $modify['set_headers']); + $modify['set_headers']['Authorization'] = 'Basic ' + . base64_encode("$value[0]:$value[1]"); + break; + case 'digest': + // @todo: Do not rely on curl + $options['curl'][CURLOPT_HTTPAUTH] = CURLAUTH_DIGEST; + $options['curl'][CURLOPT_USERPWD] = "$value[0]:$value[1]"; + break; + case 'ntlm': + $options['curl'][CURLOPT_HTTPAUTH] = CURLAUTH_NTLM; + $options['curl'][CURLOPT_USERPWD] = "$value[0]:$value[1]"; + break; + } + } + + if (isset($options['query'])) { + $value = $options['query']; + if (is_array($value)) { + $value = http_build_query($value, null, '&', PHP_QUERY_RFC3986); + } + if (!is_string($value)) { + throw new \InvalidArgumentException('query must be a string or array'); + } + $modify['query'] = $value; + unset($options['query']); + } + + // Ensure that sink is not an invalid value. + if (isset($options['sink'])) { + // TODO: Add more sink validation? + if (is_bool($options['sink'])) { + throw new \InvalidArgumentException('sink must not be a boolean'); + } + } + + $request = Psr7\modify_request($request, $modify); + if ($request->getBody() instanceof Psr7\MultipartStream) { + // Use a multipart/form-data POST if a Content-Type is not set. + // Ensure that we don't have the header in different case and set the new value. + $options['_conditional'] = Psr7\_caseless_remove(['Content-Type'], $options['_conditional']); + $options['_conditional']['Content-Type'] = 'multipart/form-data; boundary=' + . $request->getBody()->getBoundary(); + } + + // Merge in conditional headers if they are not present. + if (isset($options['_conditional'])) { + // Build up the changes so it's in a single clone of the message. + $modify = []; + foreach ($options['_conditional'] as $k => $v) { + if (!$request->hasHeader($k)) { + $modify['set_headers'][$k] = $v; + } + } + $request = Psr7\modify_request($request, $modify); + // Don't pass this internal value along to middleware/handlers. + unset($options['_conditional']); + } + + return $request; + } + + /** + * Throw Exception with pre-set message. + * @return void + * @throws InvalidArgumentException Invalid body. + */ + private function invalidBody() + { + throw new \InvalidArgumentException('Passing in the "body" request ' + . 'option as an array to send a POST request has been deprecated. ' + . 'Please use the "form_params" request option to send a ' + . 'application/x-www-form-urlencoded request, or the "multipart" ' + . 'request option to send a multipart/form-data request.'); + } +} diff --git a/vendor/guzzlehttp/guzzle/src/ClientInterface.php b/vendor/guzzlehttp/guzzle/src/ClientInterface.php new file mode 100644 index 00000000..9dbab047 --- /dev/null +++ b/vendor/guzzlehttp/guzzle/src/ClientInterface.php @@ -0,0 +1,87 @@ +strictMode = $strictMode; + + foreach ($cookieArray as $cookie) { + if (!($cookie instanceof SetCookie)) { + $cookie = new SetCookie($cookie); + } + $this->setCookie($cookie); + } + } + + /** + * Create a new Cookie jar from an associative array and domain. + * + * @param array $cookies Cookies to create the jar from + * @param string $domain Domain to set the cookies to + * + * @return self + */ + public static function fromArray(array $cookies, $domain) + { + $cookieJar = new self(); + foreach ($cookies as $name => $value) { + $cookieJar->setCookie(new SetCookie([ + 'Domain' => $domain, + 'Name' => $name, + 'Value' => $value, + 'Discard' => true + ])); + } + + return $cookieJar; + } + + /** + * @deprecated + */ + public static function getCookieValue($value) + { + return $value; + } + + /** + * Evaluate if this cookie should be persisted to storage + * that survives between requests. + * + * @param SetCookie $cookie Being evaluated. + * @param bool $allowSessionCookies If we should persist session cookies + * @return bool + */ + public static function shouldPersist( + SetCookie $cookie, + $allowSessionCookies = false + ) { + if ($cookie->getExpires() || $allowSessionCookies) { + if (!$cookie->getDiscard()) { + return true; + } + } + + return false; + } + + /** + * Finds and returns the cookie based on the name + * + * @param string $name cookie name to search for + * @return SetCookie|null cookie that was found or null if not found + */ + public function getCookieByName($name) + { + // don't allow a non string name + if ($name === null || !is_scalar($name)) { + return null; + } + foreach ($this->cookies as $cookie) { + if ($cookie->getName() !== null && strcasecmp($cookie->getName(), $name) === 0) { + return $cookie; + } + } + + return null; + } + + public function toArray() + { + return array_map(function (SetCookie $cookie) { + return $cookie->toArray(); + }, $this->getIterator()->getArrayCopy()); + } + + public function clear($domain = null, $path = null, $name = null) + { + if (!$domain) { + $this->cookies = []; + return; + } elseif (!$path) { + $this->cookies = array_filter( + $this->cookies, + function (SetCookie $cookie) use ($domain) { + return !$cookie->matchesDomain($domain); + } + ); + } elseif (!$name) { + $this->cookies = array_filter( + $this->cookies, + function (SetCookie $cookie) use ($path, $domain) { + return !($cookie->matchesPath($path) && + $cookie->matchesDomain($domain)); + } + ); + } else { + $this->cookies = array_filter( + $this->cookies, + function (SetCookie $cookie) use ($path, $domain, $name) { + return !($cookie->getName() == $name && + $cookie->matchesPath($path) && + $cookie->matchesDomain($domain)); + } + ); + } + } + + public function clearSessionCookies() + { + $this->cookies = array_filter( + $this->cookies, + function (SetCookie $cookie) { + return !$cookie->getDiscard() && $cookie->getExpires(); + } + ); + } + + public function setCookie(SetCookie $cookie) + { + // If the name string is empty (but not 0), ignore the set-cookie + // string entirely. + $name = $cookie->getName(); + if (!$name && $name !== '0') { + return false; + } + + // Only allow cookies with set and valid domain, name, value + $result = $cookie->validate(); + if ($result !== true) { + if ($this->strictMode) { + throw new \RuntimeException('Invalid cookie: ' . $result); + } else { + $this->removeCookieIfEmpty($cookie); + return false; + } + } + + // Resolve conflicts with previously set cookies + foreach ($this->cookies as $i => $c) { + + // Two cookies are identical, when their path, and domain are + // identical. + if ($c->getPath() != $cookie->getPath() || + $c->getDomain() != $cookie->getDomain() || + $c->getName() != $cookie->getName() + ) { + continue; + } + + // The previously set cookie is a discard cookie and this one is + // not so allow the new cookie to be set + if (!$cookie->getDiscard() && $c->getDiscard()) { + unset($this->cookies[$i]); + continue; + } + + // If the new cookie's expiration is further into the future, then + // replace the old cookie + if ($cookie->getExpires() > $c->getExpires()) { + unset($this->cookies[$i]); + continue; + } + + // If the value has changed, we better change it + if ($cookie->getValue() !== $c->getValue()) { + unset($this->cookies[$i]); + continue; + } + + // The cookie exists, so no need to continue + return false; + } + + $this->cookies[] = $cookie; + + return true; + } + + public function count() + { + return count($this->cookies); + } + + public function getIterator() + { + return new \ArrayIterator(array_values($this->cookies)); + } + + public function extractCookies( + RequestInterface $request, + ResponseInterface $response + ) { + if ($cookieHeader = $response->getHeader('Set-Cookie')) { + foreach ($cookieHeader as $cookie) { + $sc = SetCookie::fromString($cookie); + if (!$sc->getDomain()) { + $sc->setDomain($request->getUri()->getHost()); + } + if (0 !== strpos($sc->getPath(), '/')) { + $sc->setPath($this->getCookiePathFromRequest($request)); + } + $this->setCookie($sc); + } + } + } + + /** + * Computes cookie path following RFC 6265 section 5.1.4 + * + * @link https://tools.ietf.org/html/rfc6265#section-5.1.4 + * + * @param RequestInterface $request + * @return string + */ + private function getCookiePathFromRequest(RequestInterface $request) + { + $uriPath = $request->getUri()->getPath(); + if ('' === $uriPath) { + return '/'; + } + if (0 !== strpos($uriPath, '/')) { + return '/'; + } + if ('/' === $uriPath) { + return '/'; + } + if (0 === $lastSlashPos = strrpos($uriPath, '/')) { + return '/'; + } + + return substr($uriPath, 0, $lastSlashPos); + } + + public function withCookieHeader(RequestInterface $request) + { + $values = []; + $uri = $request->getUri(); + $scheme = $uri->getScheme(); + $host = $uri->getHost(); + $path = $uri->getPath() ?: '/'; + + foreach ($this->cookies as $cookie) { + if ($cookie->matchesPath($path) && + $cookie->matchesDomain($host) && + !$cookie->isExpired() && + (!$cookie->getSecure() || $scheme === 'https') + ) { + $values[] = $cookie->getName() . '=' + . $cookie->getValue(); + } + } + + return $values + ? $request->withHeader('Cookie', implode('; ', $values)) + : $request; + } + + /** + * If a cookie already exists and the server asks to set it again with a + * null value, the cookie must be deleted. + * + * @param SetCookie $cookie + */ + private function removeCookieIfEmpty(SetCookie $cookie) + { + $cookieValue = $cookie->getValue(); + if ($cookieValue === null || $cookieValue === '') { + $this->clear( + $cookie->getDomain(), + $cookie->getPath(), + $cookie->getName() + ); + } + } +} diff --git a/vendor/guzzlehttp/guzzle/src/Cookie/CookieJarInterface.php b/vendor/guzzlehttp/guzzle/src/Cookie/CookieJarInterface.php new file mode 100644 index 00000000..315e0404 --- /dev/null +++ b/vendor/guzzlehttp/guzzle/src/Cookie/CookieJarInterface.php @@ -0,0 +1,84 @@ +filename = $cookieFile; + $this->storeSessionCookies = $storeSessionCookies; + + if (file_exists($cookieFile)) { + $this->load($cookieFile); + } + } + + /** + * Saves the file when shutting down + */ + public function __destruct() + { + $this->save($this->filename); + } + + /** + * Saves the cookies to a file. + * + * @param string $filename File to save + * @throws \RuntimeException if the file cannot be found or created + */ + public function save($filename) + { + $json = []; + foreach ($this as $cookie) { + /** @var SetCookie $cookie */ + if (CookieJar::shouldPersist($cookie, $this->storeSessionCookies)) { + $json[] = $cookie->toArray(); + } + } + + $jsonStr = \GuzzleHttp\json_encode($json); + if (false === file_put_contents($filename, $jsonStr, LOCK_EX)) { + throw new \RuntimeException("Unable to save file {$filename}"); + } + } + + /** + * Load cookies from a JSON formatted file. + * + * Old cookies are kept unless overwritten by newly loaded ones. + * + * @param string $filename Cookie file to load. + * @throws \RuntimeException if the file cannot be loaded. + */ + public function load($filename) + { + $json = file_get_contents($filename); + if (false === $json) { + throw new \RuntimeException("Unable to load file {$filename}"); + } elseif ($json === '') { + return; + } + + $data = \GuzzleHttp\json_decode($json, true); + if (is_array($data)) { + foreach (json_decode($json, true) as $cookie) { + $this->setCookie(new SetCookie($cookie)); + } + } elseif (strlen($data)) { + throw new \RuntimeException("Invalid cookie file: {$filename}"); + } + } +} diff --git a/vendor/guzzlehttp/guzzle/src/Cookie/SessionCookieJar.php b/vendor/guzzlehttp/guzzle/src/Cookie/SessionCookieJar.php new file mode 100644 index 00000000..d9b192ff --- /dev/null +++ b/vendor/guzzlehttp/guzzle/src/Cookie/SessionCookieJar.php @@ -0,0 +1,72 @@ +sessionKey = $sessionKey; + $this->storeSessionCookies = $storeSessionCookies; + $this->load(); + } + + /** + * Saves cookies to session when shutting down + */ + public function __destruct() + { + $this->save(); + } + + /** + * Save cookies to the client session + */ + public function save() + { + $json = []; + foreach ($this as $cookie) { + /** @var SetCookie $cookie */ + if (CookieJar::shouldPersist($cookie, $this->storeSessionCookies)) { + $json[] = $cookie->toArray(); + } + } + + $_SESSION[$this->sessionKey] = json_encode($json); + } + + /** + * Load the contents of the client session into the data array + */ + protected function load() + { + if (!isset($_SESSION[$this->sessionKey])) { + return; + } + $data = json_decode($_SESSION[$this->sessionKey], true); + if (is_array($data)) { + foreach ($data as $cookie) { + $this->setCookie(new SetCookie($cookie)); + } + } elseif (strlen($data)) { + throw new \RuntimeException("Invalid cookie data"); + } + } +} diff --git a/vendor/guzzlehttp/guzzle/src/Cookie/SetCookie.php b/vendor/guzzlehttp/guzzle/src/Cookie/SetCookie.php new file mode 100644 index 00000000..6093c035 --- /dev/null +++ b/vendor/guzzlehttp/guzzle/src/Cookie/SetCookie.php @@ -0,0 +1,403 @@ + null, + 'Value' => null, + 'Domain' => null, + 'Path' => '/', + 'Max-Age' => null, + 'Expires' => null, + 'Secure' => false, + 'Discard' => false, + 'HttpOnly' => false + ]; + + /** @var array Cookie data */ + private $data; + + /** + * Create a new SetCookie object from a string + * + * @param string $cookie Set-Cookie header string + * + * @return self + */ + public static function fromString($cookie) + { + // Create the default return array + $data = self::$defaults; + // Explode the cookie string using a series of semicolons + $pieces = array_filter(array_map('trim', explode(';', $cookie))); + // The name of the cookie (first kvp) must exist and include an equal sign. + if (empty($pieces[0]) || !strpos($pieces[0], '=')) { + return new self($data); + } + + // Add the cookie pieces into the parsed data array + foreach ($pieces as $part) { + $cookieParts = explode('=', $part, 2); + $key = trim($cookieParts[0]); + $value = isset($cookieParts[1]) + ? trim($cookieParts[1], " \n\r\t\0\x0B") + : true; + + // Only check for non-cookies when cookies have been found + if (empty($data['Name'])) { + $data['Name'] = $key; + $data['Value'] = $value; + } else { + foreach (array_keys(self::$defaults) as $search) { + if (!strcasecmp($search, $key)) { + $data[$search] = $value; + continue 2; + } + } + $data[$key] = $value; + } + } + + return new self($data); + } + + /** + * @param array $data Array of cookie data provided by a Cookie parser + */ + public function __construct(array $data = []) + { + $this->data = array_replace(self::$defaults, $data); + // Extract the Expires value and turn it into a UNIX timestamp if needed + if (!$this->getExpires() && $this->getMaxAge()) { + // Calculate the Expires date + $this->setExpires(time() + $this->getMaxAge()); + } elseif ($this->getExpires() && !is_numeric($this->getExpires())) { + $this->setExpires($this->getExpires()); + } + } + + public function __toString() + { + $str = $this->data['Name'] . '=' . $this->data['Value'] . '; '; + foreach ($this->data as $k => $v) { + if ($k !== 'Name' && $k !== 'Value' && $v !== null && $v !== false) { + if ($k === 'Expires') { + $str .= 'Expires=' . gmdate('D, d M Y H:i:s \G\M\T', $v) . '; '; + } else { + $str .= ($v === true ? $k : "{$k}={$v}") . '; '; + } + } + } + + return rtrim($str, '; '); + } + + public function toArray() + { + return $this->data; + } + + /** + * Get the cookie name + * + * @return string + */ + public function getName() + { + return $this->data['Name']; + } + + /** + * Set the cookie name + * + * @param string $name Cookie name + */ + public function setName($name) + { + $this->data['Name'] = $name; + } + + /** + * Get the cookie value + * + * @return string + */ + public function getValue() + { + return $this->data['Value']; + } + + /** + * Set the cookie value + * + * @param string $value Cookie value + */ + public function setValue($value) + { + $this->data['Value'] = $value; + } + + /** + * Get the domain + * + * @return string|null + */ + public function getDomain() + { + return $this->data['Domain']; + } + + /** + * Set the domain of the cookie + * + * @param string $domain + */ + public function setDomain($domain) + { + $this->data['Domain'] = $domain; + } + + /** + * Get the path + * + * @return string + */ + public function getPath() + { + return $this->data['Path']; + } + + /** + * Set the path of the cookie + * + * @param string $path Path of the cookie + */ + public function setPath($path) + { + $this->data['Path'] = $path; + } + + /** + * Maximum lifetime of the cookie in seconds + * + * @return int|null + */ + public function getMaxAge() + { + return $this->data['Max-Age']; + } + + /** + * Set the max-age of the cookie + * + * @param int $maxAge Max age of the cookie in seconds + */ + public function setMaxAge($maxAge) + { + $this->data['Max-Age'] = $maxAge; + } + + /** + * The UNIX timestamp when the cookie Expires + * + * @return mixed + */ + public function getExpires() + { + return $this->data['Expires']; + } + + /** + * Set the unix timestamp for which the cookie will expire + * + * @param int $timestamp Unix timestamp + */ + public function setExpires($timestamp) + { + $this->data['Expires'] = is_numeric($timestamp) + ? (int) $timestamp + : strtotime($timestamp); + } + + /** + * Get whether or not this is a secure cookie + * + * @return bool|null + */ + public function getSecure() + { + return $this->data['Secure']; + } + + /** + * Set whether or not the cookie is secure + * + * @param bool $secure Set to true or false if secure + */ + public function setSecure($secure) + { + $this->data['Secure'] = $secure; + } + + /** + * Get whether or not this is a session cookie + * + * @return bool|null + */ + public function getDiscard() + { + return $this->data['Discard']; + } + + /** + * Set whether or not this is a session cookie + * + * @param bool $discard Set to true or false if this is a session cookie + */ + public function setDiscard($discard) + { + $this->data['Discard'] = $discard; + } + + /** + * Get whether or not this is an HTTP only cookie + * + * @return bool + */ + public function getHttpOnly() + { + return $this->data['HttpOnly']; + } + + /** + * Set whether or not this is an HTTP only cookie + * + * @param bool $httpOnly Set to true or false if this is HTTP only + */ + public function setHttpOnly($httpOnly) + { + $this->data['HttpOnly'] = $httpOnly; + } + + /** + * Check if the cookie matches a path value. + * + * A request-path path-matches a given cookie-path if at least one of + * the following conditions holds: + * + * - The cookie-path and the request-path are identical. + * - The cookie-path is a prefix of the request-path, and the last + * character of the cookie-path is %x2F ("/"). + * - The cookie-path is a prefix of the request-path, and the first + * character of the request-path that is not included in the cookie- + * path is a %x2F ("/") character. + * + * @param string $requestPath Path to check against + * + * @return bool + */ + public function matchesPath($requestPath) + { + $cookiePath = $this->getPath(); + + // Match on exact matches or when path is the default empty "/" + if ($cookiePath === '/' || $cookiePath == $requestPath) { + return true; + } + + // Ensure that the cookie-path is a prefix of the request path. + if (0 !== strpos($requestPath, $cookiePath)) { + return false; + } + + // Match if the last character of the cookie-path is "/" + if (substr($cookiePath, -1, 1) === '/') { + return true; + } + + // Match if the first character not included in cookie path is "/" + return substr($requestPath, strlen($cookiePath), 1) === '/'; + } + + /** + * Check if the cookie matches a domain value + * + * @param string $domain Domain to check against + * + * @return bool + */ + public function matchesDomain($domain) + { + // Remove the leading '.' as per spec in RFC 6265. + // http://tools.ietf.org/html/rfc6265#section-5.2.3 + $cookieDomain = ltrim($this->getDomain(), '.'); + + // Domain not set or exact match. + if (!$cookieDomain || !strcasecmp($domain, $cookieDomain)) { + return true; + } + + // Matching the subdomain according to RFC 6265. + // http://tools.ietf.org/html/rfc6265#section-5.1.3 + if (filter_var($domain, FILTER_VALIDATE_IP)) { + return false; + } + + return (bool) preg_match('/\.' . preg_quote($cookieDomain, '/') . '$/', $domain); + } + + /** + * Check if the cookie is expired + * + * @return bool + */ + public function isExpired() + { + return $this->getExpires() !== null && time() > $this->getExpires(); + } + + /** + * Check if the cookie is valid according to RFC 6265 + * + * @return bool|string Returns true if valid or an error message if invalid + */ + public function validate() + { + // Names must not be empty, but can be 0 + $name = $this->getName(); + if (empty($name) && !is_numeric($name)) { + return 'The cookie name must not be empty'; + } + + // Check if any of the invalid characters are present in the cookie name + if (preg_match( + '/[\x00-\x20\x22\x28-\x29\x2c\x2f\x3a-\x40\x5c\x7b\x7d\x7f]/', + $name + )) { + return 'Cookie name must not contain invalid characters: ASCII ' + . 'Control characters (0-31;127), space, tab and the ' + . 'following characters: ()<>@,;:\"/?={}'; + } + + // Value must not be empty, but can be 0 + $value = $this->getValue(); + if (empty($value) && !is_numeric($value)) { + return 'The cookie value must not be empty'; + } + + // Domains must not be empty, but can be 0 + // A "0" is not a valid internet domain, but may be used as server name + // in a private network. + $domain = $this->getDomain(); + if (empty($domain) && !is_numeric($domain)) { + return 'The cookie domain must not be empty'; + } + + return true; + } +} diff --git a/vendor/guzzlehttp/guzzle/src/Exception/BadResponseException.php b/vendor/guzzlehttp/guzzle/src/Exception/BadResponseException.php new file mode 100644 index 00000000..ffb065cd --- /dev/null +++ b/vendor/guzzlehttp/guzzle/src/Exception/BadResponseException.php @@ -0,0 +1,27 @@ +getStatusCode() + : 0; + parent::__construct($message, $code, $previous); + $this->request = $request; + $this->response = $response; + $this->handlerContext = $handlerContext; + } + + /** + * Wrap non-RequestExceptions with a RequestException + * + * @param RequestInterface $request + * @param \Exception $e + * + * @return RequestException + */ + public static function wrapException(RequestInterface $request, \Exception $e) + { + return $e instanceof RequestException + ? $e + : new RequestException($e->getMessage(), $request, null, $e); + } + + /** + * Factory method to create a new exception with a normalized error message + * + * @param RequestInterface $request Request + * @param ResponseInterface $response Response received + * @param \Exception $previous Previous exception + * @param array $ctx Optional handler context. + * + * @return self + */ + public static function create( + RequestInterface $request, + ResponseInterface $response = null, + \Exception $previous = null, + array $ctx = [] + ) { + if (!$response) { + return new self( + 'Error completing request', + $request, + null, + $previous, + $ctx + ); + } + + $level = (int) floor($response->getStatusCode() / 100); + if ($level === 4) { + $label = 'Client error'; + $className = ClientException::class; + } elseif ($level === 5) { + $label = 'Server error'; + $className = ServerException::class; + } else { + $label = 'Unsuccessful request'; + $className = __CLASS__; + } + + $uri = $request->getUri(); + $uri = static::obfuscateUri($uri); + + // Client Error: `GET /` resulted in a `404 Not Found` response: + // ... (truncated) + $message = sprintf( + '%s: `%s %s` resulted in a `%s %s` response', + $label, + $request->getMethod(), + $uri, + $response->getStatusCode(), + $response->getReasonPhrase() + ); + + $summary = static::getResponseBodySummary($response); + + if ($summary !== null) { + $message .= ":\n{$summary}\n"; + } + + return new $className($message, $request, $response, $previous, $ctx); + } + + /** + * Get a short summary of the response + * + * Will return `null` if the response is not printable. + * + * @param ResponseInterface $response + * + * @return string|null + */ + public static function getResponseBodySummary(ResponseInterface $response) + { + return \GuzzleHttp\Psr7\get_message_body_summary($response); + } + + /** + * Obfuscates URI if there is a username and a password present + * + * @param UriInterface $uri + * + * @return UriInterface + */ + private static function obfuscateUri(UriInterface $uri) + { + $userInfo = $uri->getUserInfo(); + + if (false !== ($pos = strpos($userInfo, ':'))) { + return $uri->withUserInfo(substr($userInfo, 0, $pos), '***'); + } + + return $uri; + } + + /** + * Get the request that caused the exception + * + * @return RequestInterface + */ + public function getRequest() + { + return $this->request; + } + + /** + * Get the associated response + * + * @return ResponseInterface|null + */ + public function getResponse() + { + return $this->response; + } + + /** + * Check if a response was received + * + * @return bool + */ + public function hasResponse() + { + return $this->response !== null; + } + + /** + * Get contextual information about the error from the underlying handler. + * + * The contents of this array will vary depending on which handler you are + * using. It may also be just an empty array. Relying on this data will + * couple you to a specific handler, but can give more debug information + * when needed. + * + * @return array + */ + public function getHandlerContext() + { + return $this->handlerContext; + } +} diff --git a/vendor/guzzlehttp/guzzle/src/Exception/SeekException.php b/vendor/guzzlehttp/guzzle/src/Exception/SeekException.php new file mode 100644 index 00000000..cc8e665e --- /dev/null +++ b/vendor/guzzlehttp/guzzle/src/Exception/SeekException.php @@ -0,0 +1,27 @@ +stream = $stream; + $msg = $msg ?: 'Could not seek the stream to position ' . $pos; + parent::__construct($msg); + } + + /** + * @return StreamInterface + */ + public function getStream() + { + return $this->stream; + } +} diff --git a/vendor/guzzlehttp/guzzle/src/Exception/ServerException.php b/vendor/guzzlehttp/guzzle/src/Exception/ServerException.php new file mode 100644 index 00000000..a573bc6e --- /dev/null +++ b/vendor/guzzlehttp/guzzle/src/Exception/ServerException.php @@ -0,0 +1,9 @@ +maxHandles = $maxHandles; + } + + public function create(RequestInterface $request, array $options) + { + if (isset($options['curl']['body_as_string'])) { + $options['_body_as_string'] = $options['curl']['body_as_string']; + unset($options['curl']['body_as_string']); + } + + $easy = new EasyHandle; + $easy->request = $request; + $easy->options = $options; + $conf = $this->getDefaultConf($easy); + $this->applyMethod($easy, $conf); + $this->applyHandlerOptions($easy, $conf); + $this->applyHeaders($easy, $conf); + unset($conf['_headers']); + + // Add handler options from the request configuration options + if (isset($options['curl'])) { + $conf = array_replace($conf, $options['curl']); + } + + $conf[CURLOPT_HEADERFUNCTION] = $this->createHeaderFn($easy); + $easy->handle = $this->handles + ? array_pop($this->handles) + : curl_init(); + curl_setopt_array($easy->handle, $conf); + + return $easy; + } + + public function release(EasyHandle $easy) + { + $resource = $easy->handle; + unset($easy->handle); + + if (count($this->handles) >= $this->maxHandles) { + curl_close($resource); + } else { + // Remove all callback functions as they can hold onto references + // and are not cleaned up by curl_reset. Using curl_setopt_array + // does not work for some reason, so removing each one + // individually. + curl_setopt($resource, CURLOPT_HEADERFUNCTION, null); + curl_setopt($resource, CURLOPT_READFUNCTION, null); + curl_setopt($resource, CURLOPT_WRITEFUNCTION, null); + curl_setopt($resource, CURLOPT_PROGRESSFUNCTION, null); + curl_reset($resource); + $this->handles[] = $resource; + } + } + + /** + * Completes a cURL transaction, either returning a response promise or a + * rejected promise. + * + * @param callable $handler + * @param EasyHandle $easy + * @param CurlFactoryInterface $factory Dictates how the handle is released + * + * @return \GuzzleHttp\Promise\PromiseInterface + */ + public static function finish( + callable $handler, + EasyHandle $easy, + CurlFactoryInterface $factory + ) { + if (isset($easy->options['on_stats'])) { + self::invokeStats($easy); + } + + if (!$easy->response || $easy->errno) { + return self::finishError($handler, $easy, $factory); + } + + // Return the response if it is present and there is no error. + $factory->release($easy); + + // Rewind the body of the response if possible. + $body = $easy->response->getBody(); + if ($body->isSeekable()) { + $body->rewind(); + } + + return new FulfilledPromise($easy->response); + } + + private static function invokeStats(EasyHandle $easy) + { + $curlStats = curl_getinfo($easy->handle); + $curlStats['appconnect_time'] = curl_getinfo($easy->handle, CURLINFO_APPCONNECT_TIME); + $stats = new TransferStats( + $easy->request, + $easy->response, + $curlStats['total_time'], + $easy->errno, + $curlStats + ); + call_user_func($easy->options['on_stats'], $stats); + } + + private static function finishError( + callable $handler, + EasyHandle $easy, + CurlFactoryInterface $factory + ) { + // Get error information and release the handle to the factory. + $ctx = [ + 'errno' => $easy->errno, + 'error' => curl_error($easy->handle), + 'appconnect_time' => curl_getinfo($easy->handle, CURLINFO_APPCONNECT_TIME), + ] + curl_getinfo($easy->handle); + $ctx[self::CURL_VERSION_STR] = curl_version()['version']; + $factory->release($easy); + + // Retry when nothing is present or when curl failed to rewind. + if (empty($easy->options['_err_message']) + && (!$easy->errno || $easy->errno == 65) + ) { + return self::retryFailedRewind($handler, $easy, $ctx); + } + + return self::createRejection($easy, $ctx); + } + + private static function createRejection(EasyHandle $easy, array $ctx) + { + static $connectionErrors = [ + CURLE_OPERATION_TIMEOUTED => true, + CURLE_COULDNT_RESOLVE_HOST => true, + CURLE_COULDNT_CONNECT => true, + CURLE_SSL_CONNECT_ERROR => true, + CURLE_GOT_NOTHING => true, + ]; + + // If an exception was encountered during the onHeaders event, then + // return a rejected promise that wraps that exception. + if ($easy->onHeadersException) { + return \GuzzleHttp\Promise\rejection_for( + new RequestException( + 'An error was encountered during the on_headers event', + $easy->request, + $easy->response, + $easy->onHeadersException, + $ctx + ) + ); + } + if (version_compare($ctx[self::CURL_VERSION_STR], self::LOW_CURL_VERSION_NUMBER)) { + $message = sprintf( + 'cURL error %s: %s (%s)', + $ctx['errno'], + $ctx['error'], + 'see https://curl.haxx.se/libcurl/c/libcurl-errors.html' + ); + } else { + $message = sprintf( + 'cURL error %s: %s (%s) for %s', + $ctx['errno'], + $ctx['error'], + 'see https://curl.haxx.se/libcurl/c/libcurl-errors.html', + $easy->request->getUri() + ); + } + + // Create a connection exception if it was a specific error code. + $error = isset($connectionErrors[$easy->errno]) + ? new ConnectException($message, $easy->request, null, $ctx) + : new RequestException($message, $easy->request, $easy->response, null, $ctx); + + return \GuzzleHttp\Promise\rejection_for($error); + } + + private function getDefaultConf(EasyHandle $easy) + { + $conf = [ + '_headers' => $easy->request->getHeaders(), + CURLOPT_CUSTOMREQUEST => $easy->request->getMethod(), + CURLOPT_URL => (string) $easy->request->getUri()->withFragment(''), + CURLOPT_RETURNTRANSFER => false, + CURLOPT_HEADER => false, + CURLOPT_CONNECTTIMEOUT => 150, + ]; + + if (defined('CURLOPT_PROTOCOLS')) { + $conf[CURLOPT_PROTOCOLS] = CURLPROTO_HTTP | CURLPROTO_HTTPS; + } + + $version = $easy->request->getProtocolVersion(); + if ($version == 1.1) { + $conf[CURLOPT_HTTP_VERSION] = CURL_HTTP_VERSION_1_1; + } elseif ($version == 2.0) { + $conf[CURLOPT_HTTP_VERSION] = CURL_HTTP_VERSION_2_0; + } else { + $conf[CURLOPT_HTTP_VERSION] = CURL_HTTP_VERSION_1_0; + } + + return $conf; + } + + private function applyMethod(EasyHandle $easy, array &$conf) + { + $body = $easy->request->getBody(); + $size = $body->getSize(); + + if ($size === null || $size > 0) { + $this->applyBody($easy->request, $easy->options, $conf); + return; + } + + $method = $easy->request->getMethod(); + if ($method === 'PUT' || $method === 'POST') { + // See http://tools.ietf.org/html/rfc7230#section-3.3.2 + if (!$easy->request->hasHeader('Content-Length')) { + $conf[CURLOPT_HTTPHEADER][] = 'Content-Length: 0'; + } + } elseif ($method === 'HEAD') { + $conf[CURLOPT_NOBODY] = true; + unset( + $conf[CURLOPT_WRITEFUNCTION], + $conf[CURLOPT_READFUNCTION], + $conf[CURLOPT_FILE], + $conf[CURLOPT_INFILE] + ); + } + } + + private function applyBody(RequestInterface $request, array $options, array &$conf) + { + $size = $request->hasHeader('Content-Length') + ? (int) $request->getHeaderLine('Content-Length') + : null; + + // Send the body as a string if the size is less than 1MB OR if the + // [curl][body_as_string] request value is set. + if (($size !== null && $size < 1000000) || + !empty($options['_body_as_string']) + ) { + $conf[CURLOPT_POSTFIELDS] = (string) $request->getBody(); + // Don't duplicate the Content-Length header + $this->removeHeader('Content-Length', $conf); + $this->removeHeader('Transfer-Encoding', $conf); + } else { + $conf[CURLOPT_UPLOAD] = true; + if ($size !== null) { + $conf[CURLOPT_INFILESIZE] = $size; + $this->removeHeader('Content-Length', $conf); + } + $body = $request->getBody(); + if ($body->isSeekable()) { + $body->rewind(); + } + $conf[CURLOPT_READFUNCTION] = function ($ch, $fd, $length) use ($body) { + return $body->read($length); + }; + } + + // If the Expect header is not present, prevent curl from adding it + if (!$request->hasHeader('Expect')) { + $conf[CURLOPT_HTTPHEADER][] = 'Expect:'; + } + + // cURL sometimes adds a content-type by default. Prevent this. + if (!$request->hasHeader('Content-Type')) { + $conf[CURLOPT_HTTPHEADER][] = 'Content-Type:'; + } + } + + private function applyHeaders(EasyHandle $easy, array &$conf) + { + foreach ($conf['_headers'] as $name => $values) { + foreach ($values as $value) { + $value = (string) $value; + if ($value === '') { + // cURL requires a special format for empty headers. + // See https://github.com/guzzle/guzzle/issues/1882 for more details. + $conf[CURLOPT_HTTPHEADER][] = "$name;"; + } else { + $conf[CURLOPT_HTTPHEADER][] = "$name: $value"; + } + } + } + + // Remove the Accept header if one was not set + if (!$easy->request->hasHeader('Accept')) { + $conf[CURLOPT_HTTPHEADER][] = 'Accept:'; + } + } + + /** + * Remove a header from the options array. + * + * @param string $name Case-insensitive header to remove + * @param array $options Array of options to modify + */ + private function removeHeader($name, array &$options) + { + foreach (array_keys($options['_headers']) as $key) { + if (!strcasecmp($key, $name)) { + unset($options['_headers'][$key]); + return; + } + } + } + + private function applyHandlerOptions(EasyHandle $easy, array &$conf) + { + $options = $easy->options; + if (isset($options['verify'])) { + if ($options['verify'] === false) { + unset($conf[CURLOPT_CAINFO]); + $conf[CURLOPT_SSL_VERIFYHOST] = 0; + $conf[CURLOPT_SSL_VERIFYPEER] = false; + } else { + $conf[CURLOPT_SSL_VERIFYHOST] = 2; + $conf[CURLOPT_SSL_VERIFYPEER] = true; + if (is_string($options['verify'])) { + // Throw an error if the file/folder/link path is not valid or doesn't exist. + if (!file_exists($options['verify'])) { + throw new \InvalidArgumentException( + "SSL CA bundle not found: {$options['verify']}" + ); + } + // If it's a directory or a link to a directory use CURLOPT_CAPATH. + // If not, it's probably a file, or a link to a file, so use CURLOPT_CAINFO. + if (is_dir($options['verify']) || + (is_link($options['verify']) && is_dir(readlink($options['verify'])))) { + $conf[CURLOPT_CAPATH] = $options['verify']; + } else { + $conf[CURLOPT_CAINFO] = $options['verify']; + } + } + } + } + + if (!empty($options['decode_content'])) { + $accept = $easy->request->getHeaderLine('Accept-Encoding'); + if ($accept) { + $conf[CURLOPT_ENCODING] = $accept; + } else { + $conf[CURLOPT_ENCODING] = ''; + // Don't let curl send the header over the wire + $conf[CURLOPT_HTTPHEADER][] = 'Accept-Encoding:'; + } + } + + if (isset($options['sink'])) { + $sink = $options['sink']; + if (!is_string($sink)) { + $sink = \GuzzleHttp\Psr7\stream_for($sink); + } elseif (!is_dir(dirname($sink))) { + // Ensure that the directory exists before failing in curl. + throw new \RuntimeException(sprintf( + 'Directory %s does not exist for sink value of %s', + dirname($sink), + $sink + )); + } else { + $sink = new LazyOpenStream($sink, 'w+'); + } + $easy->sink = $sink; + $conf[CURLOPT_WRITEFUNCTION] = function ($ch, $write) use ($sink) { + return $sink->write($write); + }; + } else { + // Use a default temp stream if no sink was set. + $conf[CURLOPT_FILE] = fopen('php://temp', 'w+'); + $easy->sink = Psr7\stream_for($conf[CURLOPT_FILE]); + } + $timeoutRequiresNoSignal = false; + if (isset($options['timeout'])) { + $timeoutRequiresNoSignal |= $options['timeout'] < 1; + $conf[CURLOPT_TIMEOUT_MS] = $options['timeout'] * 1000; + } + + // CURL default value is CURL_IPRESOLVE_WHATEVER + if (isset($options['force_ip_resolve'])) { + if ('v4' === $options['force_ip_resolve']) { + $conf[CURLOPT_IPRESOLVE] = CURL_IPRESOLVE_V4; + } elseif ('v6' === $options['force_ip_resolve']) { + $conf[CURLOPT_IPRESOLVE] = CURL_IPRESOLVE_V6; + } + } + + if (isset($options['connect_timeout'])) { + $timeoutRequiresNoSignal |= $options['connect_timeout'] < 1; + $conf[CURLOPT_CONNECTTIMEOUT_MS] = $options['connect_timeout'] * 1000; + } + + if ($timeoutRequiresNoSignal && strtoupper(substr(PHP_OS, 0, 3)) !== 'WIN') { + $conf[CURLOPT_NOSIGNAL] = true; + } + + if (isset($options['proxy'])) { + if (!is_array($options['proxy'])) { + $conf[CURLOPT_PROXY] = $options['proxy']; + } else { + $scheme = $easy->request->getUri()->getScheme(); + if (isset($options['proxy'][$scheme])) { + $host = $easy->request->getUri()->getHost(); + if (!isset($options['proxy']['no']) || + !\GuzzleHttp\is_host_in_noproxy($host, $options['proxy']['no']) + ) { + $conf[CURLOPT_PROXY] = $options['proxy'][$scheme]; + } + } + } + } + + if (isset($options['cert'])) { + $cert = $options['cert']; + if (is_array($cert)) { + $conf[CURLOPT_SSLCERTPASSWD] = $cert[1]; + $cert = $cert[0]; + } + if (!file_exists($cert)) { + throw new \InvalidArgumentException( + "SSL certificate not found: {$cert}" + ); + } + $conf[CURLOPT_SSLCERT] = $cert; + } + + if (isset($options['ssl_key'])) { + if (is_array($options['ssl_key'])) { + if (count($options['ssl_key']) === 2) { + list($sslKey, $conf[CURLOPT_SSLKEYPASSWD]) = $options['ssl_key']; + } else { + list($sslKey) = $options['ssl_key']; + } + } + + $sslKey = isset($sslKey) ? $sslKey: $options['ssl_key']; + + if (!file_exists($sslKey)) { + throw new \InvalidArgumentException( + "SSL private key not found: {$sslKey}" + ); + } + $conf[CURLOPT_SSLKEY] = $sslKey; + } + + if (isset($options['progress'])) { + $progress = $options['progress']; + if (!is_callable($progress)) { + throw new \InvalidArgumentException( + 'progress client option must be callable' + ); + } + $conf[CURLOPT_NOPROGRESS] = false; + $conf[CURLOPT_PROGRESSFUNCTION] = function () use ($progress) { + $args = func_get_args(); + // PHP 5.5 pushed the handle onto the start of the args + if (is_resource($args[0])) { + array_shift($args); + } + call_user_func_array($progress, $args); + }; + } + + if (!empty($options['debug'])) { + $conf[CURLOPT_STDERR] = \GuzzleHttp\debug_resource($options['debug']); + $conf[CURLOPT_VERBOSE] = true; + } + } + + /** + * This function ensures that a response was set on a transaction. If one + * was not set, then the request is retried if possible. This error + * typically means you are sending a payload, curl encountered a + * "Connection died, retrying a fresh connect" error, tried to rewind the + * stream, and then encountered a "necessary data rewind wasn't possible" + * error, causing the request to be sent through curl_multi_info_read() + * without an error status. + */ + private static function retryFailedRewind( + callable $handler, + EasyHandle $easy, + array $ctx + ) { + try { + // Only rewind if the body has been read from. + $body = $easy->request->getBody(); + if ($body->tell() > 0) { + $body->rewind(); + } + } catch (\RuntimeException $e) { + $ctx['error'] = 'The connection unexpectedly failed without ' + . 'providing an error. The request would have been retried, ' + . 'but attempting to rewind the request body failed. ' + . 'Exception: ' . $e; + return self::createRejection($easy, $ctx); + } + + // Retry no more than 3 times before giving up. + if (!isset($easy->options['_curl_retries'])) { + $easy->options['_curl_retries'] = 1; + } elseif ($easy->options['_curl_retries'] == 2) { + $ctx['error'] = 'The cURL request was retried 3 times ' + . 'and did not succeed. The most likely reason for the failure ' + . 'is that cURL was unable to rewind the body of the request ' + . 'and subsequent retries resulted in the same error. Turn on ' + . 'the debug option to see what went wrong. See ' + . 'https://bugs.php.net/bug.php?id=47204 for more information.'; + return self::createRejection($easy, $ctx); + } else { + $easy->options['_curl_retries']++; + } + + return $handler($easy->request, $easy->options); + } + + private function createHeaderFn(EasyHandle $easy) + { + if (isset($easy->options['on_headers'])) { + $onHeaders = $easy->options['on_headers']; + + if (!is_callable($onHeaders)) { + throw new \InvalidArgumentException('on_headers must be callable'); + } + } else { + $onHeaders = null; + } + + return function ($ch, $h) use ( + $onHeaders, + $easy, + &$startingResponse + ) { + $value = trim($h); + if ($value === '') { + $startingResponse = true; + $easy->createResponse(); + if ($onHeaders !== null) { + try { + $onHeaders($easy->response); + } catch (\Exception $e) { + // Associate the exception with the handle and trigger + // a curl header write error by returning 0. + $easy->onHeadersException = $e; + return -1; + } + } + } elseif ($startingResponse) { + $startingResponse = false; + $easy->headers = [$value]; + } else { + $easy->headers[] = $value; + } + return strlen($h); + }; + } +} diff --git a/vendor/guzzlehttp/guzzle/src/Handler/CurlFactoryInterface.php b/vendor/guzzlehttp/guzzle/src/Handler/CurlFactoryInterface.php new file mode 100644 index 00000000..9f556aa4 --- /dev/null +++ b/vendor/guzzlehttp/guzzle/src/Handler/CurlFactoryInterface.php @@ -0,0 +1,27 @@ +factory = isset($options['handle_factory']) + ? $options['handle_factory'] + : new CurlFactory(3); + } + + public function __invoke(RequestInterface $request, array $options) + { + if (isset($options['delay'])) { + usleep($options['delay'] * 1000); + } + + $easy = $this->factory->create($request, $options); + curl_exec($easy->handle); + $easy->errno = curl_errno($easy->handle); + + return CurlFactory::finish($this, $easy, $this->factory); + } +} diff --git a/vendor/guzzlehttp/guzzle/src/Handler/CurlMultiHandler.php b/vendor/guzzlehttp/guzzle/src/Handler/CurlMultiHandler.php new file mode 100644 index 00000000..d6f6c8be --- /dev/null +++ b/vendor/guzzlehttp/guzzle/src/Handler/CurlMultiHandler.php @@ -0,0 +1,219 @@ +factory = isset($options['handle_factory']) + ? $options['handle_factory'] : new CurlFactory(50); + + if (isset($options['select_timeout'])) { + $this->selectTimeout = $options['select_timeout']; + } elseif ($selectTimeout = getenv('GUZZLE_CURL_SELECT_TIMEOUT')) { + $this->selectTimeout = $selectTimeout; + } else { + $this->selectTimeout = 1; + } + + $this->options = isset($options['options']) ? $options['options'] : []; + } + + public function __get($name) + { + if ($name === '_mh') { + $this->_mh = curl_multi_init(); + + foreach ($this->options as $option => $value) { + // A warning is raised in case of a wrong option. + curl_multi_setopt($this->_mh, $option, $value); + } + + // Further calls to _mh will return the value directly, without entering the + // __get() method at all. + return $this->_mh; + } + + throw new \BadMethodCallException(); + } + + public function __destruct() + { + if (isset($this->_mh)) { + curl_multi_close($this->_mh); + unset($this->_mh); + } + } + + public function __invoke(RequestInterface $request, array $options) + { + $easy = $this->factory->create($request, $options); + $id = (int) $easy->handle; + + $promise = new Promise( + [$this, 'execute'], + function () use ($id) { + return $this->cancel($id); + } + ); + + $this->addRequest(['easy' => $easy, 'deferred' => $promise]); + + return $promise; + } + + /** + * Ticks the curl event loop. + */ + public function tick() + { + // Add any delayed handles if needed. + if ($this->delays) { + $currentTime = \GuzzleHttp\_current_time(); + foreach ($this->delays as $id => $delay) { + if ($currentTime >= $delay) { + unset($this->delays[$id]); + curl_multi_add_handle( + $this->_mh, + $this->handles[$id]['easy']->handle + ); + } + } + } + + // Step through the task queue which may add additional requests. + P\queue()->run(); + + if ($this->active && + curl_multi_select($this->_mh, $this->selectTimeout) === -1 + ) { + // Perform a usleep if a select returns -1. + // See: https://bugs.php.net/bug.php?id=61141 + usleep(250); + } + + while (curl_multi_exec($this->_mh, $this->active) === CURLM_CALL_MULTI_PERFORM); + + $this->processMessages(); + } + + /** + * Runs until all outstanding connections have completed. + */ + public function execute() + { + $queue = P\queue(); + + while ($this->handles || !$queue->isEmpty()) { + // If there are no transfers, then sleep for the next delay + if (!$this->active && $this->delays) { + usleep($this->timeToNext()); + } + $this->tick(); + } + } + + private function addRequest(array $entry) + { + $easy = $entry['easy']; + $id = (int) $easy->handle; + $this->handles[$id] = $entry; + if (empty($easy->options['delay'])) { + curl_multi_add_handle($this->_mh, $easy->handle); + } else { + $this->delays[$id] = \GuzzleHttp\_current_time() + ($easy->options['delay'] / 1000); + } + } + + /** + * Cancels a handle from sending and removes references to it. + * + * @param int $id Handle ID to cancel and remove. + * + * @return bool True on success, false on failure. + */ + private function cancel($id) + { + // Cannot cancel if it has been processed. + if (!isset($this->handles[$id])) { + return false; + } + + $handle = $this->handles[$id]['easy']->handle; + unset($this->delays[$id], $this->handles[$id]); + curl_multi_remove_handle($this->_mh, $handle); + curl_close($handle); + + return true; + } + + private function processMessages() + { + while ($done = curl_multi_info_read($this->_mh)) { + $id = (int) $done['handle']; + curl_multi_remove_handle($this->_mh, $done['handle']); + + if (!isset($this->handles[$id])) { + // Probably was cancelled. + continue; + } + + $entry = $this->handles[$id]; + unset($this->handles[$id], $this->delays[$id]); + $entry['easy']->errno = $done['result']; + $entry['deferred']->resolve( + CurlFactory::finish( + $this, + $entry['easy'], + $this->factory + ) + ); + } + } + + private function timeToNext() + { + $currentTime = \GuzzleHttp\_current_time(); + $nextTime = PHP_INT_MAX; + foreach ($this->delays as $time) { + if ($time < $nextTime) { + $nextTime = $time; + } + } + + return max(0, $nextTime - $currentTime) * 1000000; + } +} diff --git a/vendor/guzzlehttp/guzzle/src/Handler/EasyHandle.php b/vendor/guzzlehttp/guzzle/src/Handler/EasyHandle.php new file mode 100644 index 00000000..226d7f4a --- /dev/null +++ b/vendor/guzzlehttp/guzzle/src/Handler/EasyHandle.php @@ -0,0 +1,92 @@ +headers)) { + throw new \RuntimeException('No headers have been received'); + } + + // HTTP-version SP status-code SP reason-phrase + $startLine = explode(' ', array_shift($this->headers), 3); + $headers = \GuzzleHttp\headers_from_lines($this->headers); + $normalizedKeys = \GuzzleHttp\normalize_header_keys($headers); + + if (!empty($this->options['decode_content']) + && isset($normalizedKeys['content-encoding']) + ) { + $headers['x-encoded-content-encoding'] + = $headers[$normalizedKeys['content-encoding']]; + unset($headers[$normalizedKeys['content-encoding']]); + if (isset($normalizedKeys['content-length'])) { + $headers['x-encoded-content-length'] + = $headers[$normalizedKeys['content-length']]; + + $bodyLength = (int) $this->sink->getSize(); + if ($bodyLength) { + $headers[$normalizedKeys['content-length']] = $bodyLength; + } else { + unset($headers[$normalizedKeys['content-length']]); + } + } + } + + // Attach a response to the easy handle with the parsed headers. + $this->response = new Response( + $startLine[1], + $headers, + $this->sink, + substr($startLine[0], 5), + isset($startLine[2]) ? (string) $startLine[2] : null + ); + } + + public function __get($name) + { + $msg = $name === 'handle' + ? 'The EasyHandle has been released' + : 'Invalid property: ' . $name; + throw new \BadMethodCallException($msg); + } +} diff --git a/vendor/guzzlehttp/guzzle/src/Handler/MockHandler.php b/vendor/guzzlehttp/guzzle/src/Handler/MockHandler.php new file mode 100644 index 00000000..8fcfc950 --- /dev/null +++ b/vendor/guzzlehttp/guzzle/src/Handler/MockHandler.php @@ -0,0 +1,195 @@ +onFulfilled = $onFulfilled; + $this->onRejected = $onRejected; + + if ($queue) { + call_user_func_array([$this, 'append'], $queue); + } + } + + public function __invoke(RequestInterface $request, array $options) + { + if (!$this->queue) { + throw new \OutOfBoundsException('Mock queue is empty'); + } + + if (isset($options['delay']) && is_numeric($options['delay'])) { + usleep($options['delay'] * 1000); + } + + $this->lastRequest = $request; + $this->lastOptions = $options; + $response = array_shift($this->queue); + + if (isset($options['on_headers'])) { + if (!is_callable($options['on_headers'])) { + throw new \InvalidArgumentException('on_headers must be callable'); + } + try { + $options['on_headers']($response); + } catch (\Exception $e) { + $msg = 'An error was encountered during the on_headers event'; + $response = new RequestException($msg, $request, $response, $e); + } + } + + if (is_callable($response)) { + $response = call_user_func($response, $request, $options); + } + + $response = $response instanceof \Exception + ? \GuzzleHttp\Promise\rejection_for($response) + : \GuzzleHttp\Promise\promise_for($response); + + return $response->then( + function ($value) use ($request, $options) { + $this->invokeStats($request, $options, $value); + if ($this->onFulfilled) { + call_user_func($this->onFulfilled, $value); + } + if (isset($options['sink'])) { + $contents = (string) $value->getBody(); + $sink = $options['sink']; + + if (is_resource($sink)) { + fwrite($sink, $contents); + } elseif (is_string($sink)) { + file_put_contents($sink, $contents); + } elseif ($sink instanceof \Psr\Http\Message\StreamInterface) { + $sink->write($contents); + } + } + + return $value; + }, + function ($reason) use ($request, $options) { + $this->invokeStats($request, $options, null, $reason); + if ($this->onRejected) { + call_user_func($this->onRejected, $reason); + } + return \GuzzleHttp\Promise\rejection_for($reason); + } + ); + } + + /** + * Adds one or more variadic requests, exceptions, callables, or promises + * to the queue. + */ + public function append() + { + foreach (func_get_args() as $value) { + if ($value instanceof ResponseInterface + || $value instanceof \Exception + || $value instanceof PromiseInterface + || is_callable($value) + ) { + $this->queue[] = $value; + } else { + throw new \InvalidArgumentException('Expected a response or ' + . 'exception. Found ' . \GuzzleHttp\describe_type($value)); + } + } + } + + /** + * Get the last received request. + * + * @return RequestInterface + */ + public function getLastRequest() + { + return $this->lastRequest; + } + + /** + * Get the last received request options. + * + * @return array + */ + public function getLastOptions() + { + return $this->lastOptions; + } + + /** + * Returns the number of remaining items in the queue. + * + * @return int + */ + public function count() + { + return count($this->queue); + } + + public function reset() + { + $this->queue = []; + } + + private function invokeStats( + RequestInterface $request, + array $options, + ResponseInterface $response = null, + $reason = null + ) { + if (isset($options['on_stats'])) { + $transferTime = isset($options['transfer_time']) ? $options['transfer_time'] : 0; + $stats = new TransferStats($request, $response, $transferTime, $reason); + call_user_func($options['on_stats'], $stats); + } + } +} diff --git a/vendor/guzzlehttp/guzzle/src/Handler/Proxy.php b/vendor/guzzlehttp/guzzle/src/Handler/Proxy.php new file mode 100644 index 00000000..7ef5ad4c --- /dev/null +++ b/vendor/guzzlehttp/guzzle/src/Handler/Proxy.php @@ -0,0 +1,55 @@ +withoutHeader('Expect'); + + // Append a content-length header if body size is zero to match + // cURL's behavior. + if (0 === $request->getBody()->getSize()) { + $request = $request->withHeader('Content-Length', '0'); + } + + return $this->createResponse( + $request, + $options, + $this->createStream($request, $options), + $startTime + ); + } catch (\InvalidArgumentException $e) { + throw $e; + } catch (\Exception $e) { + // Determine if the error was a networking error. + $message = $e->getMessage(); + // This list can probably get more comprehensive. + if (strpos($message, 'getaddrinfo') // DNS lookup failed + || strpos($message, 'Connection refused') + || strpos($message, "couldn't connect to host") // error on HHVM + || strpos($message, "connection attempt failed") + ) { + $e = new ConnectException($e->getMessage(), $request, $e); + } + $e = RequestException::wrapException($request, $e); + $this->invokeStats($options, $request, $startTime, null, $e); + + return \GuzzleHttp\Promise\rejection_for($e); + } + } + + private function invokeStats( + array $options, + RequestInterface $request, + $startTime, + ResponseInterface $response = null, + $error = null + ) { + if (isset($options['on_stats'])) { + $stats = new TransferStats( + $request, + $response, + \GuzzleHttp\_current_time() - $startTime, + $error, + [] + ); + call_user_func($options['on_stats'], $stats); + } + } + + private function createResponse( + RequestInterface $request, + array $options, + $stream, + $startTime + ) { + $hdrs = $this->lastHeaders; + $this->lastHeaders = []; + $parts = explode(' ', array_shift($hdrs), 3); + $ver = explode('/', $parts[0])[1]; + $status = $parts[1]; + $reason = isset($parts[2]) ? $parts[2] : null; + $headers = \GuzzleHttp\headers_from_lines($hdrs); + list($stream, $headers) = $this->checkDecode($options, $headers, $stream); + $stream = Psr7\stream_for($stream); + $sink = $stream; + + if (strcasecmp('HEAD', $request->getMethod())) { + $sink = $this->createSink($stream, $options); + } + + $response = new Psr7\Response($status, $headers, $sink, $ver, $reason); + + if (isset($options['on_headers'])) { + try { + $options['on_headers']($response); + } catch (\Exception $e) { + $msg = 'An error was encountered during the on_headers event'; + $ex = new RequestException($msg, $request, $response, $e); + return \GuzzleHttp\Promise\rejection_for($ex); + } + } + + // Do not drain when the request is a HEAD request because they have + // no body. + if ($sink !== $stream) { + $this->drain( + $stream, + $sink, + $response->getHeaderLine('Content-Length') + ); + } + + $this->invokeStats($options, $request, $startTime, $response, null); + + return new FulfilledPromise($response); + } + + private function createSink(StreamInterface $stream, array $options) + { + if (!empty($options['stream'])) { + return $stream; + } + + $sink = isset($options['sink']) + ? $options['sink'] + : fopen('php://temp', 'r+'); + + return is_string($sink) + ? new Psr7\LazyOpenStream($sink, 'w+') + : Psr7\stream_for($sink); + } + + private function checkDecode(array $options, array $headers, $stream) + { + // Automatically decode responses when instructed. + if (!empty($options['decode_content'])) { + $normalizedKeys = \GuzzleHttp\normalize_header_keys($headers); + if (isset($normalizedKeys['content-encoding'])) { + $encoding = $headers[$normalizedKeys['content-encoding']]; + if ($encoding[0] === 'gzip' || $encoding[0] === 'deflate') { + $stream = new Psr7\InflateStream( + Psr7\stream_for($stream) + ); + $headers['x-encoded-content-encoding'] + = $headers[$normalizedKeys['content-encoding']]; + // Remove content-encoding header + unset($headers[$normalizedKeys['content-encoding']]); + // Fix content-length header + if (isset($normalizedKeys['content-length'])) { + $headers['x-encoded-content-length'] + = $headers[$normalizedKeys['content-length']]; + + $length = (int) $stream->getSize(); + if ($length === 0) { + unset($headers[$normalizedKeys['content-length']]); + } else { + $headers[$normalizedKeys['content-length']] = [$length]; + } + } + } + } + } + + return [$stream, $headers]; + } + + /** + * Drains the source stream into the "sink" client option. + * + * @param StreamInterface $source + * @param StreamInterface $sink + * @param string $contentLength Header specifying the amount of + * data to read. + * + * @return StreamInterface + * @throws \RuntimeException when the sink option is invalid. + */ + private function drain( + StreamInterface $source, + StreamInterface $sink, + $contentLength + ) { + // If a content-length header is provided, then stop reading once + // that number of bytes has been read. This can prevent infinitely + // reading from a stream when dealing with servers that do not honor + // Connection: Close headers. + Psr7\copy_to_stream( + $source, + $sink, + (strlen($contentLength) > 0 && (int) $contentLength > 0) ? (int) $contentLength : -1 + ); + + $sink->seek(0); + $source->close(); + + return $sink; + } + + /** + * Create a resource and check to ensure it was created successfully + * + * @param callable $callback Callable that returns stream resource + * + * @return resource + * @throws \RuntimeException on error + */ + private function createResource(callable $callback) + { + $errors = null; + set_error_handler(function ($_, $msg, $file, $line) use (&$errors) { + $errors[] = [ + 'message' => $msg, + 'file' => $file, + 'line' => $line + ]; + return true; + }); + + $resource = $callback(); + restore_error_handler(); + + if (!$resource) { + $message = 'Error creating resource: '; + foreach ($errors as $err) { + foreach ($err as $key => $value) { + $message .= "[$key] $value" . PHP_EOL; + } + } + throw new \RuntimeException(trim($message)); + } + + return $resource; + } + + private function createStream(RequestInterface $request, array $options) + { + static $methods; + if (!$methods) { + $methods = array_flip(get_class_methods(__CLASS__)); + } + + // HTTP/1.1 streams using the PHP stream wrapper require a + // Connection: close header + if ($request->getProtocolVersion() == '1.1' + && !$request->hasHeader('Connection') + ) { + $request = $request->withHeader('Connection', 'close'); + } + + // Ensure SSL is verified by default + if (!isset($options['verify'])) { + $options['verify'] = true; + } + + $params = []; + $context = $this->getDefaultContext($request); + + if (isset($options['on_headers']) && !is_callable($options['on_headers'])) { + throw new \InvalidArgumentException('on_headers must be callable'); + } + + if (!empty($options)) { + foreach ($options as $key => $value) { + $method = "add_{$key}"; + if (isset($methods[$method])) { + $this->{$method}($request, $context, $value, $params); + } + } + } + + if (isset($options['stream_context'])) { + if (!is_array($options['stream_context'])) { + throw new \InvalidArgumentException('stream_context must be an array'); + } + $context = array_replace_recursive( + $context, + $options['stream_context'] + ); + } + + // Microsoft NTLM authentication only supported with curl handler + if (isset($options['auth']) + && is_array($options['auth']) + && isset($options['auth'][2]) + && 'ntlm' == $options['auth'][2] + ) { + throw new \InvalidArgumentException('Microsoft NTLM authentication only supported with curl handler'); + } + + $uri = $this->resolveHost($request, $options); + + $context = $this->createResource( + function () use ($context, $params) { + return stream_context_create($context, $params); + } + ); + + return $this->createResource( + function () use ($uri, &$http_response_header, $context, $options) { + $resource = fopen((string) $uri, 'r', null, $context); + $this->lastHeaders = $http_response_header; + + if (isset($options['read_timeout'])) { + $readTimeout = $options['read_timeout']; + $sec = (int) $readTimeout; + $usec = ($readTimeout - $sec) * 100000; + stream_set_timeout($resource, $sec, $usec); + } + + return $resource; + } + ); + } + + private function resolveHost(RequestInterface $request, array $options) + { + $uri = $request->getUri(); + + if (isset($options['force_ip_resolve']) && !filter_var($uri->getHost(), FILTER_VALIDATE_IP)) { + if ('v4' === $options['force_ip_resolve']) { + $records = dns_get_record($uri->getHost(), DNS_A); + if (!isset($records[0]['ip'])) { + throw new ConnectException( + sprintf( + "Could not resolve IPv4 address for host '%s'", + $uri->getHost() + ), + $request + ); + } + $uri = $uri->withHost($records[0]['ip']); + } elseif ('v6' === $options['force_ip_resolve']) { + $records = dns_get_record($uri->getHost(), DNS_AAAA); + if (!isset($records[0]['ipv6'])) { + throw new ConnectException( + sprintf( + "Could not resolve IPv6 address for host '%s'", + $uri->getHost() + ), + $request + ); + } + $uri = $uri->withHost('[' . $records[0]['ipv6'] . ']'); + } + } + + return $uri; + } + + private function getDefaultContext(RequestInterface $request) + { + $headers = ''; + foreach ($request->getHeaders() as $name => $value) { + foreach ($value as $val) { + $headers .= "$name: $val\r\n"; + } + } + + $context = [ + 'http' => [ + 'method' => $request->getMethod(), + 'header' => $headers, + 'protocol_version' => $request->getProtocolVersion(), + 'ignore_errors' => true, + 'follow_location' => 0, + ], + ]; + + $body = (string) $request->getBody(); + + if (!empty($body)) { + $context['http']['content'] = $body; + // Prevent the HTTP handler from adding a Content-Type header. + if (!$request->hasHeader('Content-Type')) { + $context['http']['header'] .= "Content-Type:\r\n"; + } + } + + $context['http']['header'] = rtrim($context['http']['header']); + + return $context; + } + + private function add_proxy(RequestInterface $request, &$options, $value, &$params) + { + if (!is_array($value)) { + $options['http']['proxy'] = $value; + } else { + $scheme = $request->getUri()->getScheme(); + if (isset($value[$scheme])) { + if (!isset($value['no']) + || !\GuzzleHttp\is_host_in_noproxy( + $request->getUri()->getHost(), + $value['no'] + ) + ) { + $options['http']['proxy'] = $value[$scheme]; + } + } + } + } + + private function add_timeout(RequestInterface $request, &$options, $value, &$params) + { + if ($value > 0) { + $options['http']['timeout'] = $value; + } + } + + private function add_verify(RequestInterface $request, &$options, $value, &$params) + { + if ($value === true) { + // PHP 5.6 or greater will find the system cert by default. When + // < 5.6, use the Guzzle bundled cacert. + if (PHP_VERSION_ID < 50600) { + $options['ssl']['cafile'] = \GuzzleHttp\default_ca_bundle(); + } + } elseif (is_string($value)) { + $options['ssl']['cafile'] = $value; + if (!file_exists($value)) { + throw new \RuntimeException("SSL CA bundle not found: $value"); + } + } elseif ($value === false) { + $options['ssl']['verify_peer'] = false; + $options['ssl']['verify_peer_name'] = false; + return; + } else { + throw new \InvalidArgumentException('Invalid verify request option'); + } + + $options['ssl']['verify_peer'] = true; + $options['ssl']['verify_peer_name'] = true; + $options['ssl']['allow_self_signed'] = false; + } + + private function add_cert(RequestInterface $request, &$options, $value, &$params) + { + if (is_array($value)) { + $options['ssl']['passphrase'] = $value[1]; + $value = $value[0]; + } + + if (!file_exists($value)) { + throw new \RuntimeException("SSL certificate not found: {$value}"); + } + + $options['ssl']['local_cert'] = $value; + } + + private function add_progress(RequestInterface $request, &$options, $value, &$params) + { + $this->addNotification( + $params, + function ($code, $a, $b, $c, $transferred, $total) use ($value) { + if ($code == STREAM_NOTIFY_PROGRESS) { + $value($total, $transferred, null, null); + } + } + ); + } + + private function add_debug(RequestInterface $request, &$options, $value, &$params) + { + if ($value === false) { + return; + } + + static $map = [ + STREAM_NOTIFY_CONNECT => 'CONNECT', + STREAM_NOTIFY_AUTH_REQUIRED => 'AUTH_REQUIRED', + STREAM_NOTIFY_AUTH_RESULT => 'AUTH_RESULT', + STREAM_NOTIFY_MIME_TYPE_IS => 'MIME_TYPE_IS', + STREAM_NOTIFY_FILE_SIZE_IS => 'FILE_SIZE_IS', + STREAM_NOTIFY_REDIRECTED => 'REDIRECTED', + STREAM_NOTIFY_PROGRESS => 'PROGRESS', + STREAM_NOTIFY_FAILURE => 'FAILURE', + STREAM_NOTIFY_COMPLETED => 'COMPLETED', + STREAM_NOTIFY_RESOLVE => 'RESOLVE', + ]; + static $args = ['severity', 'message', 'message_code', + 'bytes_transferred', 'bytes_max']; + + $value = \GuzzleHttp\debug_resource($value); + $ident = $request->getMethod() . ' ' . $request->getUri()->withFragment(''); + $this->addNotification( + $params, + function () use ($ident, $value, $map, $args) { + $passed = func_get_args(); + $code = array_shift($passed); + fprintf($value, '<%s> [%s] ', $ident, $map[$code]); + foreach (array_filter($passed) as $i => $v) { + fwrite($value, $args[$i] . ': "' . $v . '" '); + } + fwrite($value, "\n"); + } + ); + } + + private function addNotification(array &$params, callable $notify) + { + // Wrap the existing function if needed. + if (!isset($params['notification'])) { + $params['notification'] = $notify; + } else { + $params['notification'] = $this->callArray([ + $params['notification'], + $notify + ]); + } + } + + private function callArray(array $functions) + { + return function () use ($functions) { + $args = func_get_args(); + foreach ($functions as $fn) { + call_user_func_array($fn, $args); + } + }; + } +} diff --git a/vendor/guzzlehttp/guzzle/src/HandlerStack.php b/vendor/guzzlehttp/guzzle/src/HandlerStack.php new file mode 100644 index 00000000..a1a492bd --- /dev/null +++ b/vendor/guzzlehttp/guzzle/src/HandlerStack.php @@ -0,0 +1,277 @@ +push(Middleware::httpErrors(), 'http_errors'); + $stack->push(Middleware::redirect(), 'allow_redirects'); + $stack->push(Middleware::cookies(), 'cookies'); + $stack->push(Middleware::prepareBody(), 'prepare_body'); + + return $stack; + } + + /** + * @param callable $handler Underlying HTTP handler. + */ + public function __construct(callable $handler = null) + { + $this->handler = $handler; + } + + /** + * Invokes the handler stack as a composed handler + * + * @param RequestInterface $request + * @param array $options + * + * @return ResponseInterface|PromiseInterface + */ + public function __invoke(RequestInterface $request, array $options) + { + $handler = $this->resolve(); + + return $handler($request, $options); + } + + /** + * Dumps a string representation of the stack. + * + * @return string + */ + public function __toString() + { + $depth = 0; + $stack = []; + if ($this->handler) { + $stack[] = "0) Handler: " . $this->debugCallable($this->handler); + } + + $result = ''; + foreach (array_reverse($this->stack) as $tuple) { + $depth++; + $str = "{$depth}) Name: '{$tuple[1]}', "; + $str .= "Function: " . $this->debugCallable($tuple[0]); + $result = "> {$str}\n{$result}"; + $stack[] = $str; + } + + foreach (array_keys($stack) as $k) { + $result .= "< {$stack[$k]}\n"; + } + + return $result; + } + + /** + * Set the HTTP handler that actually returns a promise. + * + * @param callable $handler Accepts a request and array of options and + * returns a Promise. + */ + public function setHandler(callable $handler) + { + $this->handler = $handler; + $this->cached = null; + } + + /** + * Returns true if the builder has a handler. + * + * @return bool + */ + public function hasHandler() + { + return (bool) $this->handler; + } + + /** + * Unshift a middleware to the bottom of the stack. + * + * @param callable $middleware Middleware function + * @param string $name Name to register for this middleware. + */ + public function unshift(callable $middleware, $name = null) + { + array_unshift($this->stack, [$middleware, $name]); + $this->cached = null; + } + + /** + * Push a middleware to the top of the stack. + * + * @param callable $middleware Middleware function + * @param string $name Name to register for this middleware. + */ + public function push(callable $middleware, $name = '') + { + $this->stack[] = [$middleware, $name]; + $this->cached = null; + } + + /** + * Add a middleware before another middleware by name. + * + * @param string $findName Middleware to find + * @param callable $middleware Middleware function + * @param string $withName Name to register for this middleware. + */ + public function before($findName, callable $middleware, $withName = '') + { + $this->splice($findName, $withName, $middleware, true); + } + + /** + * Add a middleware after another middleware by name. + * + * @param string $findName Middleware to find + * @param callable $middleware Middleware function + * @param string $withName Name to register for this middleware. + */ + public function after($findName, callable $middleware, $withName = '') + { + $this->splice($findName, $withName, $middleware, false); + } + + /** + * Remove a middleware by instance or name from the stack. + * + * @param callable|string $remove Middleware to remove by instance or name. + */ + public function remove($remove) + { + $this->cached = null; + $idx = is_callable($remove) ? 0 : 1; + $this->stack = array_values(array_filter( + $this->stack, + function ($tuple) use ($idx, $remove) { + return $tuple[$idx] !== $remove; + } + )); + } + + /** + * Compose the middleware and handler into a single callable function. + * + * @return callable + */ + public function resolve() + { + if (!$this->cached) { + if (!($prev = $this->handler)) { + throw new \LogicException('No handler has been specified'); + } + + foreach (array_reverse($this->stack) as $fn) { + $prev = $fn[0]($prev); + } + + $this->cached = $prev; + } + + return $this->cached; + } + + /** + * @param string $name + * @return int + */ + private function findByName($name) + { + foreach ($this->stack as $k => $v) { + if ($v[1] === $name) { + return $k; + } + } + + throw new \InvalidArgumentException("Middleware not found: $name"); + } + + /** + * Splices a function into the middleware list at a specific position. + * + * @param string $findName + * @param string $withName + * @param callable $middleware + * @param bool $before + */ + private function splice($findName, $withName, callable $middleware, $before) + { + $this->cached = null; + $idx = $this->findByName($findName); + $tuple = [$middleware, $withName]; + + if ($before) { + if ($idx === 0) { + array_unshift($this->stack, $tuple); + } else { + $replacement = [$tuple, $this->stack[$idx]]; + array_splice($this->stack, $idx, 1, $replacement); + } + } elseif ($idx === count($this->stack) - 1) { + $this->stack[] = $tuple; + } else { + $replacement = [$this->stack[$idx], $tuple]; + array_splice($this->stack, $idx, 1, $replacement); + } + } + + /** + * Provides a debug string for a given callable. + * + * @param array|callable $fn Function to write as a string. + * + * @return string + */ + private function debugCallable($fn) + { + if (is_string($fn)) { + return "callable({$fn})"; + } + + if (is_array($fn)) { + return is_string($fn[0]) + ? "callable({$fn[0]}::{$fn[1]})" + : "callable(['" . get_class($fn[0]) . "', '{$fn[1]}'])"; + } + + return 'callable(' . spl_object_hash($fn) . ')'; + } +} diff --git a/vendor/guzzlehttp/guzzle/src/MessageFormatter.php b/vendor/guzzlehttp/guzzle/src/MessageFormatter.php new file mode 100644 index 00000000..03879bb0 --- /dev/null +++ b/vendor/guzzlehttp/guzzle/src/MessageFormatter.php @@ -0,0 +1,185 @@ +>>>>>>>\n{request}\n<<<<<<<<\n{response}\n--------\n{error}"; + const SHORT = '[{ts}] "{method} {target} HTTP/{version}" {code}'; + + /** @var string Template used to format log messages */ + private $template; + + /** + * @param string $template Log message template + */ + public function __construct($template = self::CLF) + { + $this->template = $template ?: self::CLF; + } + + /** + * Returns a formatted message string. + * + * @param RequestInterface $request Request that was sent + * @param ResponseInterface $response Response that was received + * @param \Exception $error Exception that was received + * + * @return string + */ + public function format( + RequestInterface $request, + ResponseInterface $response = null, + \Exception $error = null + ) { + $cache = []; + + return preg_replace_callback( + '/{\s*([A-Za-z_\-\.0-9]+)\s*}/', + function (array $matches) use ($request, $response, $error, &$cache) { + if (isset($cache[$matches[1]])) { + return $cache[$matches[1]]; + } + + $result = ''; + switch ($matches[1]) { + case 'request': + $result = Psr7\str($request); + break; + case 'response': + $result = $response ? Psr7\str($response) : ''; + break; + case 'req_headers': + $result = trim($request->getMethod() + . ' ' . $request->getRequestTarget()) + . ' HTTP/' . $request->getProtocolVersion() . "\r\n" + . $this->headers($request); + break; + case 'res_headers': + $result = $response ? + sprintf( + 'HTTP/%s %d %s', + $response->getProtocolVersion(), + $response->getStatusCode(), + $response->getReasonPhrase() + ) . "\r\n" . $this->headers($response) + : 'NULL'; + break; + case 'req_body': + $result = $request->getBody(); + break; + case 'res_body': + $result = $response ? $response->getBody() : 'NULL'; + break; + case 'ts': + case 'date_iso_8601': + $result = gmdate('c'); + break; + case 'date_common_log': + $result = date('d/M/Y:H:i:s O'); + break; + case 'method': + $result = $request->getMethod(); + break; + case 'version': + $result = $request->getProtocolVersion(); + break; + case 'uri': + case 'url': + $result = $request->getUri(); + break; + case 'target': + $result = $request->getRequestTarget(); + break; + case 'req_version': + $result = $request->getProtocolVersion(); + break; + case 'res_version': + $result = $response + ? $response->getProtocolVersion() + : 'NULL'; + break; + case 'host': + $result = $request->getHeaderLine('Host'); + break; + case 'hostname': + $result = gethostname(); + break; + case 'code': + $result = $response ? $response->getStatusCode() : 'NULL'; + break; + case 'phrase': + $result = $response ? $response->getReasonPhrase() : 'NULL'; + break; + case 'error': + $result = $error ? $error->getMessage() : 'NULL'; + break; + default: + // handle prefixed dynamic headers + if (strpos($matches[1], 'req_header_') === 0) { + $result = $request->getHeaderLine(substr($matches[1], 11)); + } elseif (strpos($matches[1], 'res_header_') === 0) { + $result = $response + ? $response->getHeaderLine(substr($matches[1], 11)) + : 'NULL'; + } + } + + $cache[$matches[1]] = $result; + return $result; + }, + $this->template + ); + } + + /** + * Get headers from message as string + * + * @return string + */ + private function headers(MessageInterface $message) + { + $result = ''; + foreach ($message->getHeaders() as $name => $values) { + $result .= $name . ': ' . implode(', ', $values) . "\r\n"; + } + + return trim($result); + } +} diff --git a/vendor/guzzlehttp/guzzle/src/Middleware.php b/vendor/guzzlehttp/guzzle/src/Middleware.php new file mode 100644 index 00000000..98f7f48b --- /dev/null +++ b/vendor/guzzlehttp/guzzle/src/Middleware.php @@ -0,0 +1,254 @@ +withCookieHeader($request); + return $handler($request, $options) + ->then( + function ($response) use ($cookieJar, $request) { + $cookieJar->extractCookies($request, $response); + return $response; + } + ); + }; + }; + } + + /** + * Middleware that throws exceptions for 4xx or 5xx responses when the + * "http_error" request option is set to true. + * + * @return callable Returns a function that accepts the next handler. + */ + public static function httpErrors() + { + return function (callable $handler) { + return function ($request, array $options) use ($handler) { + if (empty($options['http_errors'])) { + return $handler($request, $options); + } + return $handler($request, $options)->then( + function (ResponseInterface $response) use ($request) { + $code = $response->getStatusCode(); + if ($code < 400) { + return $response; + } + throw RequestException::create($request, $response); + } + ); + }; + }; + } + + /** + * Middleware that pushes history data to an ArrayAccess container. + * + * @param array|\ArrayAccess $container Container to hold the history (by reference). + * + * @return callable Returns a function that accepts the next handler. + * @throws \InvalidArgumentException if container is not an array or ArrayAccess. + */ + public static function history(&$container) + { + if (!is_array($container) && !$container instanceof \ArrayAccess) { + throw new \InvalidArgumentException('history container must be an array or object implementing ArrayAccess'); + } + + return function (callable $handler) use (&$container) { + return function ($request, array $options) use ($handler, &$container) { + return $handler($request, $options)->then( + function ($value) use ($request, &$container, $options) { + $container[] = [ + 'request' => $request, + 'response' => $value, + 'error' => null, + 'options' => $options + ]; + return $value; + }, + function ($reason) use ($request, &$container, $options) { + $container[] = [ + 'request' => $request, + 'response' => null, + 'error' => $reason, + 'options' => $options + ]; + return \GuzzleHttp\Promise\rejection_for($reason); + } + ); + }; + }; + } + + /** + * Middleware that invokes a callback before and after sending a request. + * + * The provided listener cannot modify or alter the response. It simply + * "taps" into the chain to be notified before returning the promise. The + * before listener accepts a request and options array, and the after + * listener accepts a request, options array, and response promise. + * + * @param callable $before Function to invoke before forwarding the request. + * @param callable $after Function invoked after forwarding. + * + * @return callable Returns a function that accepts the next handler. + */ + public static function tap(callable $before = null, callable $after = null) + { + return function (callable $handler) use ($before, $after) { + return function ($request, array $options) use ($handler, $before, $after) { + if ($before) { + $before($request, $options); + } + $response = $handler($request, $options); + if ($after) { + $after($request, $options, $response); + } + return $response; + }; + }; + } + + /** + * Middleware that handles request redirects. + * + * @return callable Returns a function that accepts the next handler. + */ + public static function redirect() + { + return function (callable $handler) { + return new RedirectMiddleware($handler); + }; + } + + /** + * Middleware that retries requests based on the boolean result of + * invoking the provided "decider" function. + * + * If no delay function is provided, a simple implementation of exponential + * backoff will be utilized. + * + * @param callable $decider Function that accepts the number of retries, + * a request, [response], and [exception] and + * returns true if the request is to be retried. + * @param callable $delay Function that accepts the number of retries and + * returns the number of milliseconds to delay. + * + * @return callable Returns a function that accepts the next handler. + */ + public static function retry(callable $decider, callable $delay = null) + { + return function (callable $handler) use ($decider, $delay) { + return new RetryMiddleware($decider, $handler, $delay); + }; + } + + /** + * Middleware that logs requests, responses, and errors using a message + * formatter. + * + * @param LoggerInterface $logger Logs messages. + * @param MessageFormatter $formatter Formatter used to create message strings. + * @param string $logLevel Level at which to log requests. + * + * @return callable Returns a function that accepts the next handler. + */ + public static function log(LoggerInterface $logger, MessageFormatter $formatter, $logLevel = 'info' /* \Psr\Log\LogLevel::INFO */) + { + return function (callable $handler) use ($logger, $formatter, $logLevel) { + return function ($request, array $options) use ($handler, $logger, $formatter, $logLevel) { + return $handler($request, $options)->then( + function ($response) use ($logger, $request, $formatter, $logLevel) { + $message = $formatter->format($request, $response); + $logger->log($logLevel, $message); + return $response; + }, + function ($reason) use ($logger, $request, $formatter) { + $response = $reason instanceof RequestException + ? $reason->getResponse() + : null; + $message = $formatter->format($request, $response, $reason); + $logger->notice($message); + return \GuzzleHttp\Promise\rejection_for($reason); + } + ); + }; + }; + } + + /** + * This middleware adds a default content-type if possible, a default + * content-length or transfer-encoding header, and the expect header. + * + * @return callable + */ + public static function prepareBody() + { + return function (callable $handler) { + return new PrepareBodyMiddleware($handler); + }; + } + + /** + * Middleware that applies a map function to the request before passing to + * the next handler. + * + * @param callable $fn Function that accepts a RequestInterface and returns + * a RequestInterface. + * @return callable + */ + public static function mapRequest(callable $fn) + { + return function (callable $handler) use ($fn) { + return function ($request, array $options) use ($handler, $fn) { + return $handler($fn($request), $options); + }; + }; + } + + /** + * Middleware that applies a map function to the resolved promise's + * response. + * + * @param callable $fn Function that accepts a ResponseInterface and + * returns a ResponseInterface. + * @return callable + */ + public static function mapResponse(callable $fn) + { + return function (callable $handler) use ($fn) { + return function ($request, array $options) use ($handler, $fn) { + return $handler($request, $options)->then($fn); + }; + }; + } +} diff --git a/vendor/guzzlehttp/guzzle/src/Pool.php b/vendor/guzzlehttp/guzzle/src/Pool.php new file mode 100644 index 00000000..e185fdb0 --- /dev/null +++ b/vendor/guzzlehttp/guzzle/src/Pool.php @@ -0,0 +1,134 @@ + $rfn) { + if ($rfn instanceof RequestInterface) { + yield $key => $client->sendAsync($rfn, $opts); + } elseif (is_callable($rfn)) { + yield $key => $rfn($opts); + } else { + throw new \InvalidArgumentException('Each value yielded by ' + . 'the iterator must be a Psr7\Http\Message\RequestInterface ' + . 'or a callable that returns a promise that fulfills ' + . 'with a Psr7\Message\Http\ResponseInterface object.'); + } + } + }; + + $this->each = new EachPromise($requests(), $config); + } + + /** + * Get promise + * + * @return PromiseInterface + */ + public function promise() + { + return $this->each->promise(); + } + + /** + * Sends multiple requests concurrently and returns an array of responses + * and exceptions that uses the same ordering as the provided requests. + * + * IMPORTANT: This method keeps every request and response in memory, and + * as such, is NOT recommended when sending a large number or an + * indeterminate number of requests concurrently. + * + * @param ClientInterface $client Client used to send the requests + * @param array|\Iterator $requests Requests to send concurrently. + * @param array $options Passes through the options available in + * {@see GuzzleHttp\Pool::__construct} + * + * @return array Returns an array containing the response or an exception + * in the same order that the requests were sent. + * @throws \InvalidArgumentException if the event format is incorrect. + */ + public static function batch( + ClientInterface $client, + $requests, + array $options = [] + ) { + $res = []; + self::cmpCallback($options, 'fulfilled', $res); + self::cmpCallback($options, 'rejected', $res); + $pool = new static($client, $requests, $options); + $pool->promise()->wait(); + ksort($res); + + return $res; + } + + /** + * Execute callback(s) + * + * @return void + */ + private static function cmpCallback(array &$options, $name, array &$results) + { + if (!isset($options[$name])) { + $options[$name] = function ($v, $k) use (&$results) { + $results[$k] = $v; + }; + } else { + $currentFn = $options[$name]; + $options[$name] = function ($v, $k) use (&$results, $currentFn) { + $currentFn($v, $k); + $results[$k] = $v; + }; + } + } +} diff --git a/vendor/guzzlehttp/guzzle/src/PrepareBodyMiddleware.php b/vendor/guzzlehttp/guzzle/src/PrepareBodyMiddleware.php new file mode 100644 index 00000000..28b50cad --- /dev/null +++ b/vendor/guzzlehttp/guzzle/src/PrepareBodyMiddleware.php @@ -0,0 +1,111 @@ +nextHandler = $nextHandler; + } + + /** + * @param RequestInterface $request + * @param array $options + * + * @return PromiseInterface + */ + public function __invoke(RequestInterface $request, array $options) + { + $fn = $this->nextHandler; + + // Don't do anything if the request has no body. + if ($request->getBody()->getSize() === 0) { + return $fn($request, $options); + } + + $modify = []; + + // Add a default content-type if possible. + if (!$request->hasHeader('Content-Type')) { + if ($uri = $request->getBody()->getMetadata('uri')) { + if ($type = Psr7\mimetype_from_filename($uri)) { + $modify['set_headers']['Content-Type'] = $type; + } + } + } + + // Add a default content-length or transfer-encoding header. + if (!$request->hasHeader('Content-Length') + && !$request->hasHeader('Transfer-Encoding') + ) { + $size = $request->getBody()->getSize(); + if ($size !== null) { + $modify['set_headers']['Content-Length'] = $size; + } else { + $modify['set_headers']['Transfer-Encoding'] = 'chunked'; + } + } + + // Add the expect header if needed. + $this->addExpectHeader($request, $options, $modify); + + return $fn(Psr7\modify_request($request, $modify), $options); + } + + /** + * Add expect header + * + * @return void + */ + private function addExpectHeader( + RequestInterface $request, + array $options, + array &$modify + ) { + // Determine if the Expect header should be used + if ($request->hasHeader('Expect')) { + return; + } + + $expect = isset($options['expect']) ? $options['expect'] : null; + + // Return if disabled or if you're not using HTTP/1.1 or HTTP/2.0 + if ($expect === false || $request->getProtocolVersion() < 1.1) { + return; + } + + // The expect header is unconditionally enabled + if ($expect === true) { + $modify['set_headers']['Expect'] = '100-Continue'; + return; + } + + // By default, send the expect header when the payload is > 1mb + if ($expect === null) { + $expect = 1048576; + } + + // Always add if the body cannot be rewound, the size cannot be + // determined, or the size is greater than the cutoff threshold + $body = $request->getBody(); + $size = $body->getSize(); + + if ($size === null || $size >= (int) $expect || !$body->isSeekable()) { + $modify['set_headers']['Expect'] = '100-Continue'; + } + } +} diff --git a/vendor/guzzlehttp/guzzle/src/RedirectMiddleware.php b/vendor/guzzlehttp/guzzle/src/RedirectMiddleware.php new file mode 100644 index 00000000..f3180c99 --- /dev/null +++ b/vendor/guzzlehttp/guzzle/src/RedirectMiddleware.php @@ -0,0 +1,255 @@ + 5, + 'protocols' => ['http', 'https'], + 'strict' => false, + 'referer' => false, + 'track_redirects' => false, + ]; + + /** @var callable */ + private $nextHandler; + + /** + * @param callable $nextHandler Next handler to invoke. + */ + public function __construct(callable $nextHandler) + { + $this->nextHandler = $nextHandler; + } + + /** + * @param RequestInterface $request + * @param array $options + * + * @return PromiseInterface + */ + public function __invoke(RequestInterface $request, array $options) + { + $fn = $this->nextHandler; + + if (empty($options['allow_redirects'])) { + return $fn($request, $options); + } + + if ($options['allow_redirects'] === true) { + $options['allow_redirects'] = self::$defaultSettings; + } elseif (!is_array($options['allow_redirects'])) { + throw new \InvalidArgumentException('allow_redirects must be true, false, or array'); + } else { + // Merge the default settings with the provided settings + $options['allow_redirects'] += self::$defaultSettings; + } + + if (empty($options['allow_redirects']['max'])) { + return $fn($request, $options); + } + + return $fn($request, $options) + ->then(function (ResponseInterface $response) use ($request, $options) { + return $this->checkRedirect($request, $options, $response); + }); + } + + /** + * @param RequestInterface $request + * @param array $options + * @param ResponseInterface $response + * + * @return ResponseInterface|PromiseInterface + */ + public function checkRedirect( + RequestInterface $request, + array $options, + ResponseInterface $response + ) { + if (substr($response->getStatusCode(), 0, 1) != '3' + || !$response->hasHeader('Location') + ) { + return $response; + } + + $this->guardMax($request, $options); + $nextRequest = $this->modifyRequest($request, $options, $response); + + if (isset($options['allow_redirects']['on_redirect'])) { + call_user_func( + $options['allow_redirects']['on_redirect'], + $request, + $response, + $nextRequest->getUri() + ); + } + + /** @var PromiseInterface|ResponseInterface $promise */ + $promise = $this($nextRequest, $options); + + // Add headers to be able to track history of redirects. + if (!empty($options['allow_redirects']['track_redirects'])) { + return $this->withTracking( + $promise, + (string) $nextRequest->getUri(), + $response->getStatusCode() + ); + } + + return $promise; + } + + /** + * Enable tracking on promise. + * + * @return PromiseInterface + */ + private function withTracking(PromiseInterface $promise, $uri, $statusCode) + { + return $promise->then( + function (ResponseInterface $response) use ($uri, $statusCode) { + // Note that we are pushing to the front of the list as this + // would be an earlier response than what is currently present + // in the history header. + $historyHeader = $response->getHeader(self::HISTORY_HEADER); + $statusHeader = $response->getHeader(self::STATUS_HISTORY_HEADER); + array_unshift($historyHeader, $uri); + array_unshift($statusHeader, $statusCode); + return $response->withHeader(self::HISTORY_HEADER, $historyHeader) + ->withHeader(self::STATUS_HISTORY_HEADER, $statusHeader); + } + ); + } + + /** + * Check for too many redirects + * + * @return void + * + * @throws TooManyRedirectsException Too many redirects. + */ + private function guardMax(RequestInterface $request, array &$options) + { + $current = isset($options['__redirect_count']) + ? $options['__redirect_count'] + : 0; + $options['__redirect_count'] = $current + 1; + $max = $options['allow_redirects']['max']; + + if ($options['__redirect_count'] > $max) { + throw new TooManyRedirectsException( + "Will not follow more than {$max} redirects", + $request + ); + } + } + + /** + * @param RequestInterface $request + * @param array $options + * @param ResponseInterface $response + * + * @return RequestInterface + */ + public function modifyRequest( + RequestInterface $request, + array $options, + ResponseInterface $response + ) { + // Request modifications to apply. + $modify = []; + $protocols = $options['allow_redirects']['protocols']; + + // Use a GET request if this is an entity enclosing request and we are + // not forcing RFC compliance, but rather emulating what all browsers + // would do. + $statusCode = $response->getStatusCode(); + if ($statusCode == 303 || + ($statusCode <= 302 && !$options['allow_redirects']['strict']) + ) { + $modify['method'] = 'GET'; + $modify['body'] = ''; + } + + $uri = $this->redirectUri($request, $response, $protocols); + if (isset($options['idn_conversion']) && ($options['idn_conversion'] !== false)) { + $idnOptions = ($options['idn_conversion'] === true) ? IDNA_DEFAULT : $options['idn_conversion']; + $uri = _idn_uri_convert($uri, $idnOptions); + } + + $modify['uri'] = $uri; + Psr7\rewind_body($request); + + // Add the Referer header if it is told to do so and only + // add the header if we are not redirecting from https to http. + if ($options['allow_redirects']['referer'] + && $modify['uri']->getScheme() === $request->getUri()->getScheme() + ) { + $uri = $request->getUri()->withUserInfo(''); + $modify['set_headers']['Referer'] = (string) $uri; + } else { + $modify['remove_headers'][] = 'Referer'; + } + + // Remove Authorization header if host is different. + if ($request->getUri()->getHost() !== $modify['uri']->getHost()) { + $modify['remove_headers'][] = 'Authorization'; + } + + return Psr7\modify_request($request, $modify); + } + + /** + * Set the appropriate URL on the request based on the location header + * + * @param RequestInterface $request + * @param ResponseInterface $response + * @param array $protocols + * + * @return UriInterface + */ + private function redirectUri( + RequestInterface $request, + ResponseInterface $response, + array $protocols + ) { + $location = Psr7\UriResolver::resolve( + $request->getUri(), + new Psr7\Uri($response->getHeaderLine('Location')) + ); + + // Ensure that the redirect URI is allowed based on the protocols. + if (!in_array($location->getScheme(), $protocols)) { + throw new BadResponseException( + sprintf( + 'Redirect URI, %s, does not use one of the allowed redirect protocols: %s', + $location, + implode(', ', $protocols) + ), + $request, + $response + ); + } + + return $location; + } +} diff --git a/vendor/guzzlehttp/guzzle/src/RequestOptions.php b/vendor/guzzlehttp/guzzle/src/RequestOptions.php new file mode 100644 index 00000000..e90fc0c8 --- /dev/null +++ b/vendor/guzzlehttp/guzzle/src/RequestOptions.php @@ -0,0 +1,263 @@ +decider = $decider; + $this->nextHandler = $nextHandler; + $this->delay = $delay ?: __CLASS__ . '::exponentialDelay'; + } + + /** + * Default exponential backoff delay function. + * + * @param int $retries + * + * @return int milliseconds. + */ + public static function exponentialDelay($retries) + { + return (int) pow(2, $retries - 1) * 1000; + } + + /** + * @param RequestInterface $request + * @param array $options + * + * @return PromiseInterface + */ + public function __invoke(RequestInterface $request, array $options) + { + if (!isset($options['retries'])) { + $options['retries'] = 0; + } + + $fn = $this->nextHandler; + return $fn($request, $options) + ->then( + $this->onFulfilled($request, $options), + $this->onRejected($request, $options) + ); + } + + /** + * Execute fulfilled closure + * + * @return mixed + */ + private function onFulfilled(RequestInterface $req, array $options) + { + return function ($value) use ($req, $options) { + if (!call_user_func( + $this->decider, + $options['retries'], + $req, + $value, + null + )) { + return $value; + } + return $this->doRetry($req, $options, $value); + }; + } + + /** + * Execute rejected closure + * + * @return callable + */ + private function onRejected(RequestInterface $req, array $options) + { + return function ($reason) use ($req, $options) { + if (!call_user_func( + $this->decider, + $options['retries'], + $req, + null, + $reason + )) { + return \GuzzleHttp\Promise\rejection_for($reason); + } + return $this->doRetry($req, $options); + }; + } + + /** + * @return self + */ + private function doRetry(RequestInterface $request, array $options, ResponseInterface $response = null) + { + $options['delay'] = call_user_func($this->delay, ++$options['retries'], $response); + + return $this($request, $options); + } +} diff --git a/vendor/guzzlehttp/guzzle/src/TransferStats.php b/vendor/guzzlehttp/guzzle/src/TransferStats.php new file mode 100644 index 00000000..240e392b --- /dev/null +++ b/vendor/guzzlehttp/guzzle/src/TransferStats.php @@ -0,0 +1,126 @@ +request = $request; + $this->response = $response; + $this->transferTime = $transferTime; + $this->handlerErrorData = $handlerErrorData; + $this->handlerStats = $handlerStats; + } + + /** + * @return RequestInterface + */ + public function getRequest() + { + return $this->request; + } + + /** + * Returns the response that was received (if any). + * + * @return ResponseInterface|null + */ + public function getResponse() + { + return $this->response; + } + + /** + * Returns true if a response was received. + * + * @return bool + */ + public function hasResponse() + { + return $this->response !== null; + } + + /** + * Gets handler specific error data. + * + * This might be an exception, a integer representing an error code, or + * anything else. Relying on this value assumes that you know what handler + * you are using. + * + * @return mixed + */ + public function getHandlerErrorData() + { + return $this->handlerErrorData; + } + + /** + * Get the effective URI the request was sent to. + * + * @return UriInterface + */ + public function getEffectiveUri() + { + return $this->request->getUri(); + } + + /** + * Get the estimated time the request was being transferred by the handler. + * + * @return float|null Time in seconds. + */ + public function getTransferTime() + { + return $this->transferTime; + } + + /** + * Gets an array of all of the handler specific transfer data. + * + * @return array + */ + public function getHandlerStats() + { + return $this->handlerStats; + } + + /** + * Get a specific handler statistic from the handler by name. + * + * @param string $stat Handler specific transfer stat to retrieve. + * + * @return mixed|null + */ + public function getHandlerStat($stat) + { + return isset($this->handlerStats[$stat]) + ? $this->handlerStats[$stat] + : null; + } +} diff --git a/vendor/guzzlehttp/guzzle/src/UriTemplate.php b/vendor/guzzlehttp/guzzle/src/UriTemplate.php new file mode 100644 index 00000000..643a20c3 --- /dev/null +++ b/vendor/guzzlehttp/guzzle/src/UriTemplate.php @@ -0,0 +1,237 @@ + ['prefix' => '', 'joiner' => ',', 'query' => false], + '+' => ['prefix' => '', 'joiner' => ',', 'query' => false], + '#' => ['prefix' => '#', 'joiner' => ',', 'query' => false], + '.' => ['prefix' => '.', 'joiner' => '.', 'query' => false], + '/' => ['prefix' => '/', 'joiner' => '/', 'query' => false], + ';' => ['prefix' => ';', 'joiner' => ';', 'query' => true], + '?' => ['prefix' => '?', 'joiner' => '&', 'query' => true], + '&' => ['prefix' => '&', 'joiner' => '&', 'query' => true] + ]; + + /** @var array Delimiters */ + private static $delims = [':', '/', '?', '#', '[', ']', '@', '!', '$', + '&', '\'', '(', ')', '*', '+', ',', ';', '=']; + + /** @var array Percent encoded delimiters */ + private static $delimsPct = ['%3A', '%2F', '%3F', '%23', '%5B', '%5D', + '%40', '%21', '%24', '%26', '%27', '%28', '%29', '%2A', '%2B', '%2C', + '%3B', '%3D']; + + public function expand($template, array $variables) + { + if (false === strpos($template, '{')) { + return $template; + } + + $this->template = $template; + $this->variables = $variables; + + return preg_replace_callback( + '/\{([^\}]+)\}/', + [$this, 'expandMatch'], + $this->template + ); + } + + /** + * Parse an expression into parts + * + * @param string $expression Expression to parse + * + * @return array Returns an associative array of parts + */ + private function parseExpression($expression) + { + $result = []; + + if (isset(self::$operatorHash[$expression[0]])) { + $result['operator'] = $expression[0]; + $expression = substr($expression, 1); + } else { + $result['operator'] = ''; + } + + foreach (explode(',', $expression) as $value) { + $value = trim($value); + $varspec = []; + if ($colonPos = strpos($value, ':')) { + $varspec['value'] = substr($value, 0, $colonPos); + $varspec['modifier'] = ':'; + $varspec['position'] = (int) substr($value, $colonPos + 1); + } elseif (substr($value, -1) === '*') { + $varspec['modifier'] = '*'; + $varspec['value'] = substr($value, 0, -1); + } else { + $varspec['value'] = (string) $value; + $varspec['modifier'] = ''; + } + $result['values'][] = $varspec; + } + + return $result; + } + + /** + * Process an expansion + * + * @param array $matches Matches met in the preg_replace_callback + * + * @return string Returns the replacement string + */ + private function expandMatch(array $matches) + { + static $rfc1738to3986 = ['+' => '%20', '%7e' => '~']; + + $replacements = []; + $parsed = self::parseExpression($matches[1]); + $prefix = self::$operatorHash[$parsed['operator']]['prefix']; + $joiner = self::$operatorHash[$parsed['operator']]['joiner']; + $useQuery = self::$operatorHash[$parsed['operator']]['query']; + + foreach ($parsed['values'] as $value) { + if (!isset($this->variables[$value['value']])) { + continue; + } + + $variable = $this->variables[$value['value']]; + $actuallyUseQuery = $useQuery; + $expanded = ''; + + if (is_array($variable)) { + $isAssoc = $this->isAssoc($variable); + $kvp = []; + foreach ($variable as $key => $var) { + if ($isAssoc) { + $key = rawurlencode($key); + $isNestedArray = is_array($var); + } else { + $isNestedArray = false; + } + + if (!$isNestedArray) { + $var = rawurlencode($var); + if ($parsed['operator'] === '+' || + $parsed['operator'] === '#' + ) { + $var = $this->decodeReserved($var); + } + } + + if ($value['modifier'] === '*') { + if ($isAssoc) { + if ($isNestedArray) { + // Nested arrays must allow for deeply nested + // structures. + $var = strtr( + http_build_query([$key => $var]), + $rfc1738to3986 + ); + } else { + $var = $key . '=' . $var; + } + } elseif ($key > 0 && $actuallyUseQuery) { + $var = $value['value'] . '=' . $var; + } + } + + $kvp[$key] = $var; + } + + if (empty($variable)) { + $actuallyUseQuery = false; + } elseif ($value['modifier'] === '*') { + $expanded = implode($joiner, $kvp); + if ($isAssoc) { + // Don't prepend the value name when using the explode + // modifier with an associative array. + $actuallyUseQuery = false; + } + } else { + if ($isAssoc) { + // When an associative array is encountered and the + // explode modifier is not set, then the result must be + // a comma separated list of keys followed by their + // respective values. + foreach ($kvp as $k => &$v) { + $v = $k . ',' . $v; + } + } + $expanded = implode(',', $kvp); + } + } else { + if ($value['modifier'] === ':') { + $variable = substr($variable, 0, $value['position']); + } + $expanded = rawurlencode($variable); + if ($parsed['operator'] === '+' || $parsed['operator'] === '#') { + $expanded = $this->decodeReserved($expanded); + } + } + + if ($actuallyUseQuery) { + if (!$expanded && $joiner !== '&') { + $expanded = $value['value']; + } else { + $expanded = $value['value'] . '=' . $expanded; + } + } + + $replacements[] = $expanded; + } + + $ret = implode($joiner, $replacements); + if ($ret && $prefix) { + return $prefix . $ret; + } + + return $ret; + } + + /** + * Determines if an array is associative. + * + * This makes the assumption that input arrays are sequences or hashes. + * This assumption is a tradeoff for accuracy in favor of speed, but it + * should work in almost every case where input is supplied for a URI + * template. + * + * @param array $array Array to check + * + * @return bool + */ + private function isAssoc(array $array) + { + return $array && array_keys($array)[0] !== 0; + } + + /** + * Removes percent encoding on reserved characters (used with + and # + * modifiers). + * + * @param string $string String to fix + * + * @return string + */ + private function decodeReserved($string) + { + return str_replace(self::$delimsPct, self::$delims, $string); + } +} diff --git a/vendor/guzzlehttp/guzzle/src/functions.php b/vendor/guzzlehttp/guzzle/src/functions.php new file mode 100644 index 00000000..a6ba4445 --- /dev/null +++ b/vendor/guzzlehttp/guzzle/src/functions.php @@ -0,0 +1,394 @@ +expand($template, $variables); +} + +/** + * Debug function used to describe the provided value type and class. + * + * @param mixed $input + * + * @return string Returns a string containing the type of the variable and + * if a class is provided, the class name. + */ +function describe_type($input) +{ + switch (gettype($input)) { + case 'object': + return 'object(' . get_class($input) . ')'; + case 'array': + return 'array(' . count($input) . ')'; + default: + ob_start(); + var_dump($input); + // normalize float vs double + return str_replace('double(', 'float(', rtrim(ob_get_clean())); + } +} + +/** + * Parses an array of header lines into an associative array of headers. + * + * @param iterable $lines Header lines array of strings in the following + * format: "Name: Value" + * @return array + */ +function headers_from_lines($lines) +{ + $headers = []; + + foreach ($lines as $line) { + $parts = explode(':', $line, 2); + $headers[trim($parts[0])][] = isset($parts[1]) + ? trim($parts[1]) + : null; + } + + return $headers; +} + +/** + * Returns a debug stream based on the provided variable. + * + * @param mixed $value Optional value + * + * @return resource + */ +function debug_resource($value = null) +{ + if (is_resource($value)) { + return $value; + } elseif (defined('STDOUT')) { + return STDOUT; + } + + return fopen('php://output', 'w'); +} + +/** + * Chooses and creates a default handler to use based on the environment. + * + * The returned handler is not wrapped by any default middlewares. + * + * @throws \RuntimeException if no viable Handler is available. + * @return callable Returns the best handler for the given system. + */ +function choose_handler() +{ + $handler = null; + if (function_exists('curl_multi_exec') && function_exists('curl_exec')) { + $handler = Proxy::wrapSync(new CurlMultiHandler(), new CurlHandler()); + } elseif (function_exists('curl_exec')) { + $handler = new CurlHandler(); + } elseif (function_exists('curl_multi_exec')) { + $handler = new CurlMultiHandler(); + } + + if (ini_get('allow_url_fopen')) { + $handler = $handler + ? Proxy::wrapStreaming($handler, new StreamHandler()) + : new StreamHandler(); + } elseif (!$handler) { + throw new \RuntimeException('GuzzleHttp requires cURL, the ' + . 'allow_url_fopen ini setting, or a custom HTTP handler.'); + } + + return $handler; +} + +/** + * Get the default User-Agent string to use with Guzzle + * + * @return string + */ +function default_user_agent() +{ + static $defaultAgent = ''; + + if (!$defaultAgent) { + $defaultAgent = 'GuzzleHttp/' . Client::VERSION; + if (extension_loaded('curl') && function_exists('curl_version')) { + $defaultAgent .= ' curl/' . \curl_version()['version']; + } + $defaultAgent .= ' PHP/' . PHP_VERSION; + } + + return $defaultAgent; +} + +/** + * Returns the default cacert bundle for the current system. + * + * First, the openssl.cafile and curl.cainfo php.ini settings are checked. + * If those settings are not configured, then the common locations for + * bundles found on Red Hat, CentOS, Fedora, Ubuntu, Debian, FreeBSD, OS X + * and Windows are checked. If any of these file locations are found on + * disk, they will be utilized. + * + * Note: the result of this function is cached for subsequent calls. + * + * @return string + * @throws \RuntimeException if no bundle can be found. + */ +function default_ca_bundle() +{ + static $cached = null; + static $cafiles = [ + // Red Hat, CentOS, Fedora (provided by the ca-certificates package) + '/etc/pki/tls/certs/ca-bundle.crt', + // Ubuntu, Debian (provided by the ca-certificates package) + '/etc/ssl/certs/ca-certificates.crt', + // FreeBSD (provided by the ca_root_nss package) + '/usr/local/share/certs/ca-root-nss.crt', + // SLES 12 (provided by the ca-certificates package) + '/var/lib/ca-certificates/ca-bundle.pem', + // OS X provided by homebrew (using the default path) + '/usr/local/etc/openssl/cert.pem', + // Google app engine + '/etc/ca-certificates.crt', + // Windows? + 'C:\\windows\\system32\\curl-ca-bundle.crt', + 'C:\\windows\\curl-ca-bundle.crt', + ]; + + if ($cached) { + return $cached; + } + + if ($ca = ini_get('openssl.cafile')) { + return $cached = $ca; + } + + if ($ca = ini_get('curl.cainfo')) { + return $cached = $ca; + } + + foreach ($cafiles as $filename) { + if (file_exists($filename)) { + return $cached = $filename; + } + } + + throw new \RuntimeException( + <<< EOT +No system CA bundle could be found in any of the the common system locations. +PHP versions earlier than 5.6 are not properly configured to use the system's +CA bundle by default. In order to verify peer certificates, you will need to +supply the path on disk to a certificate bundle to the 'verify' request +option: http://docs.guzzlephp.org/en/latest/clients.html#verify. If you do not +need a specific certificate bundle, then Mozilla provides a commonly used CA +bundle which can be downloaded here (provided by the maintainer of cURL): +https://raw.githubusercontent.com/bagder/ca-bundle/master/ca-bundle.crt. Once +you have a CA bundle available on disk, you can set the 'openssl.cafile' PHP +ini setting to point to the path to the file, allowing you to omit the 'verify' +request option. See http://curl.haxx.se/docs/sslcerts.html for more +information. +EOT + ); +} + +/** + * Creates an associative array of lowercase header names to the actual + * header casing. + * + * @param array $headers + * + * @return array + */ +function normalize_header_keys(array $headers) +{ + $result = []; + foreach (array_keys($headers) as $key) { + $result[strtolower($key)] = $key; + } + + return $result; +} + +/** + * Returns true if the provided host matches any of the no proxy areas. + * + * This method will strip a port from the host if it is present. Each pattern + * can be matched with an exact match (e.g., "foo.com" == "foo.com") or a + * partial match: (e.g., "foo.com" == "baz.foo.com" and ".foo.com" == + * "baz.foo.com", but ".foo.com" != "foo.com"). + * + * Areas are matched in the following cases: + * 1. "*" (without quotes) always matches any hosts. + * 2. An exact match. + * 3. The area starts with "." and the area is the last part of the host. e.g. + * '.mit.edu' will match any host that ends with '.mit.edu'. + * + * @param string $host Host to check against the patterns. + * @param array $noProxyArray An array of host patterns. + * + * @return bool + */ +function is_host_in_noproxy($host, array $noProxyArray) +{ + if (strlen($host) === 0) { + throw new \InvalidArgumentException('Empty host provided'); + } + + // Strip port if present. + if (strpos($host, ':')) { + $host = explode($host, ':', 2)[0]; + } + + foreach ($noProxyArray as $area) { + // Always match on wildcards. + if ($area === '*') { + return true; + } elseif (empty($area)) { + // Don't match on empty values. + continue; + } elseif ($area === $host) { + // Exact matches. + return true; + } else { + // Special match if the area when prefixed with ".". Remove any + // existing leading "." and add a new leading ".". + $area = '.' . ltrim($area, '.'); + if (substr($host, -(strlen($area))) === $area) { + return true; + } + } + } + + return false; +} + +/** + * Wrapper for json_decode that throws when an error occurs. + * + * @param string $json JSON data to parse + * @param bool $assoc When true, returned objects will be converted + * into associative arrays. + * @param int $depth User specified recursion depth. + * @param int $options Bitmask of JSON decode options. + * + * @return mixed + * @throws Exception\InvalidArgumentException if the JSON cannot be decoded. + * @link http://www.php.net/manual/en/function.json-decode.php + */ +function json_decode($json, $assoc = false, $depth = 512, $options = 0) +{ + $data = \json_decode($json, $assoc, $depth, $options); + if (JSON_ERROR_NONE !== json_last_error()) { + throw new Exception\InvalidArgumentException( + 'json_decode error: ' . json_last_error_msg() + ); + } + + return $data; +} + +/** + * Wrapper for JSON encoding that throws when an error occurs. + * + * @param mixed $value The value being encoded + * @param int $options JSON encode option bitmask + * @param int $depth Set the maximum depth. Must be greater than zero. + * + * @return string + * @throws Exception\InvalidArgumentException if the JSON cannot be encoded. + * @link http://www.php.net/manual/en/function.json-encode.php + */ +function json_encode($value, $options = 0, $depth = 512) +{ + $json = \json_encode($value, $options, $depth); + if (JSON_ERROR_NONE !== json_last_error()) { + throw new Exception\InvalidArgumentException( + 'json_encode error: ' . json_last_error_msg() + ); + } + + return $json; +} + +/** + * Wrapper for the hrtime() or microtime() functions + * (depending on the PHP version, one of the two is used) + * + * @return float|mixed UNIX timestamp + * @internal + */ +function _current_time() +{ + return function_exists('hrtime') ? hrtime(true) / 1e9 : microtime(true); +} + + +/** + * @param int $options + * + * @return UriInterface + * + * @internal + */ +function _idn_uri_convert(UriInterface $uri, $options = 0) +{ + if ($uri->getHost()) { + $idnaVariant = defined('INTL_IDNA_VARIANT_UTS46') ? INTL_IDNA_VARIANT_UTS46 : 0; + $asciiHost = $idnaVariant === 0 + ? idn_to_ascii($uri->getHost(), $options) + : idn_to_ascii($uri->getHost(), $options, $idnaVariant, $info); + if ($asciiHost === false) { + $errorBitSet = isset($info['errors']) ? $info['errors'] : 0; + + $errorConstants = array_filter(array_keys(get_defined_constants()), function ($name) { + return substr($name, 0, 11) === 'IDNA_ERROR_'; + }); + + $errors = []; + foreach ($errorConstants as $errorConstant) { + if ($errorBitSet & constant($errorConstant)) { + $errors[] = $errorConstant; + } + } + + $errorMessage = 'IDN conversion failed'; + if ($errors) { + $errorMessage .= ' (errors: ' . implode(', ', $errors) . ')'; + } + + throw new InvalidArgumentException($errorMessage); + } else { + if ($uri->getHost() !== $asciiHost) { + // Replace URI only if the ASCII version is different + $uri = $uri->withHost($asciiHost); + } + } + } + + return $uri; +} diff --git a/vendor/guzzlehttp/guzzle/src/functions_include.php b/vendor/guzzlehttp/guzzle/src/functions_include.php new file mode 100644 index 00000000..fda82f12 --- /dev/null +++ b/vendor/guzzlehttp/guzzle/src/functions_include.php @@ -0,0 +1,6 @@ + + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +THE SOFTWARE. diff --git a/vendor/guzzlehttp/promises/Makefile b/vendor/guzzlehttp/promises/Makefile new file mode 100644 index 00000000..9e40e034 --- /dev/null +++ b/vendor/guzzlehttp/promises/Makefile @@ -0,0 +1,13 @@ +all: clean test + +test: + vendor/bin/phpunit + +coverage: + vendor/bin/phpunit --coverage-html=artifacts/coverage + +view-coverage: + open artifacts/coverage/index.html + +clean: + rm -rf artifacts/* diff --git a/vendor/guzzlehttp/promises/README.md b/vendor/guzzlehttp/promises/README.md new file mode 100644 index 00000000..5481531d --- /dev/null +++ b/vendor/guzzlehttp/promises/README.md @@ -0,0 +1,504 @@ +# Guzzle Promises + +[Promises/A+](https://promisesaplus.com/) implementation that handles promise +chaining and resolution iteratively, allowing for "infinite" promise chaining +while keeping the stack size constant. Read [this blog post](https://blog.domenic.me/youre-missing-the-point-of-promises/) +for a general introduction to promises. + +- [Features](#features) +- [Quick start](#quick-start) +- [Synchronous wait](#synchronous-wait) +- [Cancellation](#cancellation) +- [API](#api) + - [Promise](#promise) + - [FulfilledPromise](#fulfilledpromise) + - [RejectedPromise](#rejectedpromise) +- [Promise interop](#promise-interop) +- [Implementation notes](#implementation-notes) + + +# Features + +- [Promises/A+](https://promisesaplus.com/) implementation. +- Promise resolution and chaining is handled iteratively, allowing for + "infinite" promise chaining. +- Promises have a synchronous `wait` method. +- Promises can be cancelled. +- Works with any object that has a `then` function. +- C# style async/await coroutine promises using + `GuzzleHttp\Promise\coroutine()`. + + +# Quick start + +A *promise* represents the eventual result of an asynchronous operation. The +primary way of interacting with a promise is through its `then` method, which +registers callbacks to receive either a promise's eventual value or the reason +why the promise cannot be fulfilled. + + +## Callbacks + +Callbacks are registered with the `then` method by providing an optional +`$onFulfilled` followed by an optional `$onRejected` function. + + +```php +use GuzzleHttp\Promise\Promise; + +$promise = new Promise(); +$promise->then( + // $onFulfilled + function ($value) { + echo 'The promise was fulfilled.'; + }, + // $onRejected + function ($reason) { + echo 'The promise was rejected.'; + } +); +``` + +*Resolving* a promise means that you either fulfill a promise with a *value* or +reject a promise with a *reason*. Resolving a promises triggers callbacks +registered with the promises's `then` method. These callbacks are triggered +only once and in the order in which they were added. + + +## Resolving a promise + +Promises are fulfilled using the `resolve($value)` method. Resolving a promise +with any value other than a `GuzzleHttp\Promise\RejectedPromise` will trigger +all of the onFulfilled callbacks (resolving a promise with a rejected promise +will reject the promise and trigger the `$onRejected` callbacks). + +```php +use GuzzleHttp\Promise\Promise; + +$promise = new Promise(); +$promise + ->then(function ($value) { + // Return a value and don't break the chain + return "Hello, " . $value; + }) + // This then is executed after the first then and receives the value + // returned from the first then. + ->then(function ($value) { + echo $value; + }); + +// Resolving the promise triggers the $onFulfilled callbacks and outputs +// "Hello, reader". +$promise->resolve('reader.'); +``` + + +## Promise forwarding + +Promises can be chained one after the other. Each then in the chain is a new +promise. The return value of a promise is what's forwarded to the next +promise in the chain. Returning a promise in a `then` callback will cause the +subsequent promises in the chain to only be fulfilled when the returned promise +has been fulfilled. The next promise in the chain will be invoked with the +resolved value of the promise. + +```php +use GuzzleHttp\Promise\Promise; + +$promise = new Promise(); +$nextPromise = new Promise(); + +$promise + ->then(function ($value) use ($nextPromise) { + echo $value; + return $nextPromise; + }) + ->then(function ($value) { + echo $value; + }); + +// Triggers the first callback and outputs "A" +$promise->resolve('A'); +// Triggers the second callback and outputs "B" +$nextPromise->resolve('B'); +``` + +## Promise rejection + +When a promise is rejected, the `$onRejected` callbacks are invoked with the +rejection reason. + +```php +use GuzzleHttp\Promise\Promise; + +$promise = new Promise(); +$promise->then(null, function ($reason) { + echo $reason; +}); + +$promise->reject('Error!'); +// Outputs "Error!" +``` + +## Rejection forwarding + +If an exception is thrown in an `$onRejected` callback, subsequent +`$onRejected` callbacks are invoked with the thrown exception as the reason. + +```php +use GuzzleHttp\Promise\Promise; + +$promise = new Promise(); +$promise->then(null, function ($reason) { + throw new \Exception($reason); +})->then(null, function ($reason) { + assert($reason->getMessage() === 'Error!'); +}); + +$promise->reject('Error!'); +``` + +You can also forward a rejection down the promise chain by returning a +`GuzzleHttp\Promise\RejectedPromise` in either an `$onFulfilled` or +`$onRejected` callback. + +```php +use GuzzleHttp\Promise\Promise; +use GuzzleHttp\Promise\RejectedPromise; + +$promise = new Promise(); +$promise->then(null, function ($reason) { + return new RejectedPromise($reason); +})->then(null, function ($reason) { + assert($reason === 'Error!'); +}); + +$promise->reject('Error!'); +``` + +If an exception is not thrown in a `$onRejected` callback and the callback +does not return a rejected promise, downstream `$onFulfilled` callbacks are +invoked using the value returned from the `$onRejected` callback. + +```php +use GuzzleHttp\Promise\Promise; +use GuzzleHttp\Promise\RejectedPromise; + +$promise = new Promise(); +$promise + ->then(null, function ($reason) { + return "It's ok"; + }) + ->then(function ($value) { + assert($value === "It's ok"); + }); + +$promise->reject('Error!'); +``` + +# Synchronous wait + +You can synchronously force promises to complete using a promise's `wait` +method. When creating a promise, you can provide a wait function that is used +to synchronously force a promise to complete. When a wait function is invoked +it is expected to deliver a value to the promise or reject the promise. If the +wait function does not deliver a value, then an exception is thrown. The wait +function provided to a promise constructor is invoked when the `wait` function +of the promise is called. + +```php +$promise = new Promise(function () use (&$promise) { + $promise->resolve('foo'); +}); + +// Calling wait will return the value of the promise. +echo $promise->wait(); // outputs "foo" +``` + +If an exception is encountered while invoking the wait function of a promise, +the promise is rejected with the exception and the exception is thrown. + +```php +$promise = new Promise(function () use (&$promise) { + throw new \Exception('foo'); +}); + +$promise->wait(); // throws the exception. +``` + +Calling `wait` on a promise that has been fulfilled will not trigger the wait +function. It will simply return the previously resolved value. + +```php +$promise = new Promise(function () { die('this is not called!'); }); +$promise->resolve('foo'); +echo $promise->wait(); // outputs "foo" +``` + +Calling `wait` on a promise that has been rejected will throw an exception. If +the rejection reason is an instance of `\Exception` the reason is thrown. +Otherwise, a `GuzzleHttp\Promise\RejectionException` is thrown and the reason +can be obtained by calling the `getReason` method of the exception. + +```php +$promise = new Promise(); +$promise->reject('foo'); +$promise->wait(); +``` + +> PHP Fatal error: Uncaught exception 'GuzzleHttp\Promise\RejectionException' with message 'The promise was rejected with value: foo' + + +## Unwrapping a promise + +When synchronously waiting on a promise, you are joining the state of the +promise into the current state of execution (i.e., return the value of the +promise if it was fulfilled or throw an exception if it was rejected). This is +called "unwrapping" the promise. Waiting on a promise will by default unwrap +the promise state. + +You can force a promise to resolve and *not* unwrap the state of the promise +by passing `false` to the first argument of the `wait` function: + +```php +$promise = new Promise(); +$promise->reject('foo'); +// This will not throw an exception. It simply ensures the promise has +// been resolved. +$promise->wait(false); +``` + +When unwrapping a promise, the resolved value of the promise will be waited +upon until the unwrapped value is not a promise. This means that if you resolve +promise A with a promise B and unwrap promise A, the value returned by the +wait function will be the value delivered to promise B. + +**Note**: when you do not unwrap the promise, no value is returned. + + +# Cancellation + +You can cancel a promise that has not yet been fulfilled using the `cancel()` +method of a promise. When creating a promise you can provide an optional +cancel function that when invoked cancels the action of computing a resolution +of the promise. + + +# API + + +## Promise + +When creating a promise object, you can provide an optional `$waitFn` and +`$cancelFn`. `$waitFn` is a function that is invoked with no arguments and is +expected to resolve the promise. `$cancelFn` is a function with no arguments +that is expected to cancel the computation of a promise. It is invoked when the +`cancel()` method of a promise is called. + +```php +use GuzzleHttp\Promise\Promise; + +$promise = new Promise( + function () use (&$promise) { + $promise->resolve('waited'); + }, + function () { + // do something that will cancel the promise computation (e.g., close + // a socket, cancel a database query, etc...) + } +); + +assert('waited' === $promise->wait()); +``` + +A promise has the following methods: + +- `then(callable $onFulfilled, callable $onRejected) : PromiseInterface` + + Appends fulfillment and rejection handlers to the promise, and returns a new promise resolving to the return value of the called handler. + +- `otherwise(callable $onRejected) : PromiseInterface` + + Appends a rejection handler callback to the promise, and returns a new promise resolving to the return value of the callback if it is called, or to its original fulfillment value if the promise is instead fulfilled. + +- `wait($unwrap = true) : mixed` + + Synchronously waits on the promise to complete. + + `$unwrap` controls whether or not the value of the promise is returned for a + fulfilled promise or if an exception is thrown if the promise is rejected. + This is set to `true` by default. + +- `cancel()` + + Attempts to cancel the promise if possible. The promise being cancelled and + the parent most ancestor that has not yet been resolved will also be + cancelled. Any promises waiting on the cancelled promise to resolve will also + be cancelled. + +- `getState() : string` + + Returns the state of the promise. One of `pending`, `fulfilled`, or + `rejected`. + +- `resolve($value)` + + Fulfills the promise with the given `$value`. + +- `reject($reason)` + + Rejects the promise with the given `$reason`. + + +## FulfilledPromise + +A fulfilled promise can be created to represent a promise that has been +fulfilled. + +```php +use GuzzleHttp\Promise\FulfilledPromise; + +$promise = new FulfilledPromise('value'); + +// Fulfilled callbacks are immediately invoked. +$promise->then(function ($value) { + echo $value; +}); +``` + + +## RejectedPromise + +A rejected promise can be created to represent a promise that has been +rejected. + +```php +use GuzzleHttp\Promise\RejectedPromise; + +$promise = new RejectedPromise('Error'); + +// Rejected callbacks are immediately invoked. +$promise->then(null, function ($reason) { + echo $reason; +}); +``` + + +# Promise interop + +This library works with foreign promises that have a `then` method. This means +you can use Guzzle promises with [React promises](https://github.com/reactphp/promise) +for example. When a foreign promise is returned inside of a then method +callback, promise resolution will occur recursively. + +```php +// Create a React promise +$deferred = new React\Promise\Deferred(); +$reactPromise = $deferred->promise(); + +// Create a Guzzle promise that is fulfilled with a React promise. +$guzzlePromise = new \GuzzleHttp\Promise\Promise(); +$guzzlePromise->then(function ($value) use ($reactPromise) { + // Do something something with the value... + // Return the React promise + return $reactPromise; +}); +``` + +Please note that wait and cancel chaining is no longer possible when forwarding +a foreign promise. You will need to wrap a third-party promise with a Guzzle +promise in order to utilize wait and cancel functions with foreign promises. + + +## Event Loop Integration + +In order to keep the stack size constant, Guzzle promises are resolved +asynchronously using a task queue. When waiting on promises synchronously, the +task queue will be automatically run to ensure that the blocking promise and +any forwarded promises are resolved. When using promises asynchronously in an +event loop, you will need to run the task queue on each tick of the loop. If +you do not run the task queue, then promises will not be resolved. + +You can run the task queue using the `run()` method of the global task queue +instance. + +```php +// Get the global task queue +$queue = \GuzzleHttp\Promise\queue(); +$queue->run(); +``` + +For example, you could use Guzzle promises with React using a periodic timer: + +```php +$loop = React\EventLoop\Factory::create(); +$loop->addPeriodicTimer(0, [$queue, 'run']); +``` + +*TODO*: Perhaps adding a `futureTick()` on each tick would be faster? + + +# Implementation notes + + +## Promise resolution and chaining is handled iteratively + +By shuffling pending handlers from one owner to another, promises are +resolved iteratively, allowing for "infinite" then chaining. + +```php +then(function ($v) { + // The stack size remains constant (a good thing) + echo xdebug_get_stack_depth() . ', '; + return $v + 1; + }); +} + +$parent->resolve(0); +var_dump($p->wait()); // int(1000) + +``` + +When a promise is fulfilled or rejected with a non-promise value, the promise +then takes ownership of the handlers of each child promise and delivers values +down the chain without using recursion. + +When a promise is resolved with another promise, the original promise transfers +all of its pending handlers to the new promise. When the new promise is +eventually resolved, all of the pending handlers are delivered the forwarded +value. + + +## A promise is the deferred. + +Some promise libraries implement promises using a deferred object to represent +a computation and a promise object to represent the delivery of the result of +the computation. This is a nice separation of computation and delivery because +consumers of the promise cannot modify the value that will be eventually +delivered. + +One side effect of being able to implement promise resolution and chaining +iteratively is that you need to be able for one promise to reach into the state +of another promise to shuffle around ownership of handlers. In order to achieve +this without making the handlers of a promise publicly mutable, a promise is +also the deferred value, allowing promises of the same parent class to reach +into and modify the private properties of promises of the same type. While this +does allow consumers of the value to modify the resolution or rejection of the +deferred, it is a small price to pay for keeping the stack size constant. + +```php +$promise = new Promise(); +$promise->then(function ($value) { echo $value; }); +// The promise is the deferred value, so you can deliver a value to it. +$promise->resolve('foo'); +// prints "foo" +``` diff --git a/vendor/guzzlehttp/promises/composer.json b/vendor/guzzlehttp/promises/composer.json new file mode 100644 index 00000000..9aefc360 --- /dev/null +++ b/vendor/guzzlehttp/promises/composer.json @@ -0,0 +1,34 @@ +{ + "name": "guzzlehttp/promises", + "description": "Guzzle promises library", + "keywords": ["promise"], + "license": "MIT", + "authors": [ + { + "name": "Michael Dowling", + "email": "mtdowling@gmail.com", + "homepage": "https://github.com/mtdowling" + } + ], + "require": { + "php": ">=5.5.0" + }, + "require-dev": { + "phpunit/phpunit": "^4.0" + }, + "autoload": { + "psr-4": { + "GuzzleHttp\\Promise\\": "src/" + }, + "files": ["src/functions_include.php"] + }, + "scripts": { + "test": "vendor/bin/phpunit", + "test-ci": "vendor/bin/phpunit --coverage-text" + }, + "extra": { + "branch-alias": { + "dev-master": "1.4-dev" + } + } +} diff --git a/vendor/guzzlehttp/promises/src/AggregateException.php b/vendor/guzzlehttp/promises/src/AggregateException.php new file mode 100644 index 00000000..26ef2fe8 --- /dev/null +++ b/vendor/guzzlehttp/promises/src/AggregateException.php @@ -0,0 +1,16 @@ +then(function ($v) { echo $v; }); + * + * @param callable $generatorFn Generator function to wrap into a promise. + * + * @return Promise + * @link https://github.com/petkaantonov/bluebird/blob/master/API.md#generators inspiration + */ +final class Coroutine implements PromiseInterface +{ + /** + * @var PromiseInterface|null + */ + private $currentPromise; + + /** + * @var Generator + */ + private $generator; + + /** + * @var Promise + */ + private $result; + + public function __construct(callable $generatorFn) + { + $this->generator = $generatorFn(); + $this->result = new Promise(function () { + while (isset($this->currentPromise)) { + $this->currentPromise->wait(); + } + }); + $this->nextCoroutine($this->generator->current()); + } + + public function then( + callable $onFulfilled = null, + callable $onRejected = null + ) { + return $this->result->then($onFulfilled, $onRejected); + } + + public function otherwise(callable $onRejected) + { + return $this->result->otherwise($onRejected); + } + + public function wait($unwrap = true) + { + return $this->result->wait($unwrap); + } + + public function getState() + { + return $this->result->getState(); + } + + public function resolve($value) + { + $this->result->resolve($value); + } + + public function reject($reason) + { + $this->result->reject($reason); + } + + public function cancel() + { + $this->currentPromise->cancel(); + $this->result->cancel(); + } + + private function nextCoroutine($yielded) + { + $this->currentPromise = promise_for($yielded) + ->then([$this, '_handleSuccess'], [$this, '_handleFailure']); + } + + /** + * @internal + */ + public function _handleSuccess($value) + { + unset($this->currentPromise); + try { + $next = $this->generator->send($value); + if ($this->generator->valid()) { + $this->nextCoroutine($next); + } else { + $this->result->resolve($value); + } + } catch (Exception $exception) { + $this->result->reject($exception); + } catch (Throwable $throwable) { + $this->result->reject($throwable); + } + } + + /** + * @internal + */ + public function _handleFailure($reason) + { + unset($this->currentPromise); + try { + $nextYield = $this->generator->throw(exception_for($reason)); + // The throw was caught, so keep iterating on the coroutine + $this->nextCoroutine($nextYield); + } catch (Exception $exception) { + $this->result->reject($exception); + } catch (Throwable $throwable) { + $this->result->reject($throwable); + } + } +} diff --git a/vendor/guzzlehttp/promises/src/EachPromise.php b/vendor/guzzlehttp/promises/src/EachPromise.php new file mode 100644 index 00000000..e1ca44d8 --- /dev/null +++ b/vendor/guzzlehttp/promises/src/EachPromise.php @@ -0,0 +1,229 @@ +iterable = iter_for($iterable); + + if (isset($config['concurrency'])) { + $this->concurrency = $config['concurrency']; + } + + if (isset($config['fulfilled'])) { + $this->onFulfilled = $config['fulfilled']; + } + + if (isset($config['rejected'])) { + $this->onRejected = $config['rejected']; + } + } + + public function promise() + { + if ($this->aggregate) { + return $this->aggregate; + } + + try { + $this->createPromise(); + $this->iterable->rewind(); + $this->refillPending(); + } catch (\Throwable $e) { + $this->aggregate->reject($e); + } catch (\Exception $e) { + $this->aggregate->reject($e); + } + + return $this->aggregate; + } + + private function createPromise() + { + $this->mutex = false; + $this->aggregate = new Promise(function () { + reset($this->pending); + if (empty($this->pending) && !$this->iterable->valid()) { + $this->aggregate->resolve(null); + return; + } + + // Consume a potentially fluctuating list of promises while + // ensuring that indexes are maintained (precluding array_shift). + while ($promise = current($this->pending)) { + next($this->pending); + $promise->wait(); + if ($this->aggregate->getState() !== PromiseInterface::PENDING) { + return; + } + } + }); + + // Clear the references when the promise is resolved. + $clearFn = function () { + $this->iterable = $this->concurrency = $this->pending = null; + $this->onFulfilled = $this->onRejected = null; + }; + + $this->aggregate->then($clearFn, $clearFn); + } + + private function refillPending() + { + if (!$this->concurrency) { + // Add all pending promises. + while ($this->addPending() && $this->advanceIterator()); + return; + } + + // Add only up to N pending promises. + $concurrency = is_callable($this->concurrency) + ? call_user_func($this->concurrency, count($this->pending)) + : $this->concurrency; + $concurrency = max($concurrency - count($this->pending), 0); + // Concurrency may be set to 0 to disallow new promises. + if (!$concurrency) { + return; + } + // Add the first pending promise. + $this->addPending(); + // Note this is special handling for concurrency=1 so that we do + // not advance the iterator after adding the first promise. This + // helps work around issues with generators that might not have the + // next value to yield until promise callbacks are called. + while (--$concurrency + && $this->advanceIterator() + && $this->addPending()); + } + + private function addPending() + { + if (!$this->iterable || !$this->iterable->valid()) { + return false; + } + + $promise = promise_for($this->iterable->current()); + $idx = $this->iterable->key(); + + $this->pending[$idx] = $promise->then( + function ($value) use ($idx) { + if ($this->onFulfilled) { + call_user_func( + $this->onFulfilled, $value, $idx, $this->aggregate + ); + } + $this->step($idx); + }, + function ($reason) use ($idx) { + if ($this->onRejected) { + call_user_func( + $this->onRejected, $reason, $idx, $this->aggregate + ); + } + $this->step($idx); + } + ); + + return true; + } + + private function advanceIterator() + { + // Place a lock on the iterator so that we ensure to not recurse, + // preventing fatal generator errors. + if ($this->mutex) { + return false; + } + + $this->mutex = true; + + try { + $this->iterable->next(); + $this->mutex = false; + return true; + } catch (\Throwable $e) { + $this->aggregate->reject($e); + $this->mutex = false; + return false; + } catch (\Exception $e) { + $this->aggregate->reject($e); + $this->mutex = false; + return false; + } + } + + private function step($idx) + { + // If the promise was already resolved, then ignore this step. + if ($this->aggregate->getState() !== PromiseInterface::PENDING) { + return; + } + + unset($this->pending[$idx]); + + // Only refill pending promises if we are not locked, preventing the + // EachPromise to recursively invoke the provided iterator, which + // cause a fatal error: "Cannot resume an already running generator" + if ($this->advanceIterator() && !$this->checkIfFinished()) { + // Add more pending promises if possible. + $this->refillPending(); + } + } + + private function checkIfFinished() + { + if (!$this->pending && !$this->iterable->valid()) { + // Resolve the promise if there's nothing left to do. + $this->aggregate->resolve(null); + return true; + } + + return false; + } +} diff --git a/vendor/guzzlehttp/promises/src/FulfilledPromise.php b/vendor/guzzlehttp/promises/src/FulfilledPromise.php new file mode 100644 index 00000000..f6d2965d --- /dev/null +++ b/vendor/guzzlehttp/promises/src/FulfilledPromise.php @@ -0,0 +1,82 @@ +value = $value; + } + + public function then( + callable $onFulfilled = null, + callable $onRejected = null + ) { + // Return itself if there is no onFulfilled function. + if (!$onFulfilled) { + return $this; + } + + $queue = queue(); + $p = new Promise([$queue, 'run']); + $value = $this->value; + $queue->add(static function () use ($p, $value, $onFulfilled) { + if ($p->getState() === self::PENDING) { + try { + $p->resolve($onFulfilled($value)); + } catch (\Throwable $e) { + $p->reject($e); + } catch (\Exception $e) { + $p->reject($e); + } + } + }); + + return $p; + } + + public function otherwise(callable $onRejected) + { + return $this->then(null, $onRejected); + } + + public function wait($unwrap = true, $defaultDelivery = null) + { + return $unwrap ? $this->value : null; + } + + public function getState() + { + return self::FULFILLED; + } + + public function resolve($value) + { + if ($value !== $this->value) { + throw new \LogicException("Cannot resolve a fulfilled promise"); + } + } + + public function reject($reason) + { + throw new \LogicException("Cannot reject a fulfilled promise"); + } + + public function cancel() + { + // pass + } +} diff --git a/vendor/guzzlehttp/promises/src/Promise.php b/vendor/guzzlehttp/promises/src/Promise.php new file mode 100644 index 00000000..73790dbf --- /dev/null +++ b/vendor/guzzlehttp/promises/src/Promise.php @@ -0,0 +1,280 @@ +waitFn = $waitFn; + $this->cancelFn = $cancelFn; + } + + public function then( + callable $onFulfilled = null, + callable $onRejected = null + ) { + if ($this->state === self::PENDING) { + $p = new Promise(null, [$this, 'cancel']); + $this->handlers[] = [$p, $onFulfilled, $onRejected]; + $p->waitList = $this->waitList; + $p->waitList[] = $this; + return $p; + } + + // Return a fulfilled promise and immediately invoke any callbacks. + if ($this->state === self::FULFILLED) { + return $onFulfilled + ? promise_for($this->result)->then($onFulfilled) + : promise_for($this->result); + } + + // It's either cancelled or rejected, so return a rejected promise + // and immediately invoke any callbacks. + $rejection = rejection_for($this->result); + return $onRejected ? $rejection->then(null, $onRejected) : $rejection; + } + + public function otherwise(callable $onRejected) + { + return $this->then(null, $onRejected); + } + + public function wait($unwrap = true) + { + $this->waitIfPending(); + + $inner = $this->result instanceof PromiseInterface + ? $this->result->wait($unwrap) + : $this->result; + + if ($unwrap) { + if ($this->result instanceof PromiseInterface + || $this->state === self::FULFILLED + ) { + return $inner; + } else { + // It's rejected so "unwrap" and throw an exception. + throw exception_for($inner); + } + } + } + + public function getState() + { + return $this->state; + } + + public function cancel() + { + if ($this->state !== self::PENDING) { + return; + } + + $this->waitFn = $this->waitList = null; + + if ($this->cancelFn) { + $fn = $this->cancelFn; + $this->cancelFn = null; + try { + $fn(); + } catch (\Throwable $e) { + $this->reject($e); + } catch (\Exception $e) { + $this->reject($e); + } + } + + // Reject the promise only if it wasn't rejected in a then callback. + if ($this->state === self::PENDING) { + $this->reject(new CancellationException('Promise has been cancelled')); + } + } + + public function resolve($value) + { + $this->settle(self::FULFILLED, $value); + } + + public function reject($reason) + { + $this->settle(self::REJECTED, $reason); + } + + private function settle($state, $value) + { + if ($this->state !== self::PENDING) { + // Ignore calls with the same resolution. + if ($state === $this->state && $value === $this->result) { + return; + } + throw $this->state === $state + ? new \LogicException("The promise is already {$state}.") + : new \LogicException("Cannot change a {$this->state} promise to {$state}"); + } + + if ($value === $this) { + throw new \LogicException('Cannot fulfill or reject a promise with itself'); + } + + // Clear out the state of the promise but stash the handlers. + $this->state = $state; + $this->result = $value; + $handlers = $this->handlers; + $this->handlers = null; + $this->waitList = $this->waitFn = null; + $this->cancelFn = null; + + if (!$handlers) { + return; + } + + // If the value was not a settled promise or a thenable, then resolve + // it in the task queue using the correct ID. + if (!method_exists($value, 'then')) { + $id = $state === self::FULFILLED ? 1 : 2; + // It's a success, so resolve the handlers in the queue. + queue()->add(static function () use ($id, $value, $handlers) { + foreach ($handlers as $handler) { + self::callHandler($id, $value, $handler); + } + }); + } elseif ($value instanceof Promise + && $value->getState() === self::PENDING + ) { + // We can just merge our handlers onto the next promise. + $value->handlers = array_merge($value->handlers, $handlers); + } else { + // Resolve the handlers when the forwarded promise is resolved. + $value->then( + static function ($value) use ($handlers) { + foreach ($handlers as $handler) { + self::callHandler(1, $value, $handler); + } + }, + static function ($reason) use ($handlers) { + foreach ($handlers as $handler) { + self::callHandler(2, $reason, $handler); + } + } + ); + } + } + + /** + * Call a stack of handlers using a specific callback index and value. + * + * @param int $index 1 (resolve) or 2 (reject). + * @param mixed $value Value to pass to the callback. + * @param array $handler Array of handler data (promise and callbacks). + * + * @return array Returns the next group to resolve. + */ + private static function callHandler($index, $value, array $handler) + { + /** @var PromiseInterface $promise */ + $promise = $handler[0]; + + // The promise may have been cancelled or resolved before placing + // this thunk in the queue. + if ($promise->getState() !== self::PENDING) { + return; + } + + try { + if (isset($handler[$index])) { + $promise->resolve($handler[$index]($value)); + } elseif ($index === 1) { + // Forward resolution values as-is. + $promise->resolve($value); + } else { + // Forward rejections down the chain. + $promise->reject($value); + } + } catch (\Throwable $reason) { + $promise->reject($reason); + } catch (\Exception $reason) { + $promise->reject($reason); + } + } + + private function waitIfPending() + { + if ($this->state !== self::PENDING) { + return; + } elseif ($this->waitFn) { + $this->invokeWaitFn(); + } elseif ($this->waitList) { + $this->invokeWaitList(); + } else { + // If there's not wait function, then reject the promise. + $this->reject('Cannot wait on a promise that has ' + . 'no internal wait function. You must provide a wait ' + . 'function when constructing the promise to be able to ' + . 'wait on a promise.'); + } + + queue()->run(); + + if ($this->state === self::PENDING) { + $this->reject('Invoking the wait callback did not resolve the promise'); + } + } + + private function invokeWaitFn() + { + try { + $wfn = $this->waitFn; + $this->waitFn = null; + $wfn(true); + } catch (\Exception $reason) { + if ($this->state === self::PENDING) { + // The promise has not been resolved yet, so reject the promise + // with the exception. + $this->reject($reason); + } else { + // The promise was already resolved, so there's a problem in + // the application. + throw $reason; + } + } + } + + private function invokeWaitList() + { + $waitList = $this->waitList; + $this->waitList = null; + + foreach ($waitList as $result) { + while (true) { + $result->waitIfPending(); + + if ($result->result instanceof Promise) { + $result = $result->result; + } else { + if ($result->result instanceof PromiseInterface) { + $result->result->wait(false); + } + break; + } + } + } + } +} diff --git a/vendor/guzzlehttp/promises/src/PromiseInterface.php b/vendor/guzzlehttp/promises/src/PromiseInterface.php new file mode 100644 index 00000000..bb1a37c2 --- /dev/null +++ b/vendor/guzzlehttp/promises/src/PromiseInterface.php @@ -0,0 +1,93 @@ +reason = $reason; + } + + public function then( + callable $onFulfilled = null, + callable $onRejected = null + ) { + // If there's no onRejected callback then just return self. + if (!$onRejected) { + return $this; + } + + $queue = queue(); + $reason = $this->reason; + $p = new Promise([$queue, 'run']); + $queue->add(static function () use ($p, $reason, $onRejected) { + if ($p->getState() === self::PENDING) { + try { + // Return a resolved promise if onRejected does not throw. + $p->resolve($onRejected($reason)); + } catch (\Throwable $e) { + // onRejected threw, so return a rejected promise. + $p->reject($e); + } catch (\Exception $e) { + // onRejected threw, so return a rejected promise. + $p->reject($e); + } + } + }); + + return $p; + } + + public function otherwise(callable $onRejected) + { + return $this->then(null, $onRejected); + } + + public function wait($unwrap = true, $defaultDelivery = null) + { + if ($unwrap) { + throw exception_for($this->reason); + } + } + + public function getState() + { + return self::REJECTED; + } + + public function resolve($value) + { + throw new \LogicException("Cannot resolve a rejected promise"); + } + + public function reject($reason) + { + if ($reason !== $this->reason) { + throw new \LogicException("Cannot reject a rejected promise"); + } + } + + public function cancel() + { + // pass + } +} diff --git a/vendor/guzzlehttp/promises/src/RejectionException.php b/vendor/guzzlehttp/promises/src/RejectionException.php new file mode 100644 index 00000000..af61d9f2 --- /dev/null +++ b/vendor/guzzlehttp/promises/src/RejectionException.php @@ -0,0 +1,47 @@ +reason = $reason; + + $message = 'The promise was rejected'; + + if ($description) { + $message .= ' with reason: ' . $description; + } elseif (is_string($reason) + || (is_object($reason) && method_exists($reason, '__toString')) + ) { + $message .= ' with reason: ' . $this->reason; + } elseif ($reason instanceof \JsonSerializable) { + $message .= ' with reason: ' + . json_encode($this->reason, JSON_PRETTY_PRINT); + } + + parent::__construct($message); + } + + /** + * Returns the rejection reason. + * + * @return mixed + */ + public function getReason() + { + return $this->reason; + } +} diff --git a/vendor/guzzlehttp/promises/src/TaskQueue.php b/vendor/guzzlehttp/promises/src/TaskQueue.php new file mode 100644 index 00000000..eded773f --- /dev/null +++ b/vendor/guzzlehttp/promises/src/TaskQueue.php @@ -0,0 +1,66 @@ +run(); + */ +class TaskQueue implements TaskQueueInterface +{ + private $enableShutdown = true; + private $queue = []; + + public function __construct($withShutdown = true) + { + if ($withShutdown) { + register_shutdown_function(function () { + if ($this->enableShutdown) { + // Only run the tasks if an E_ERROR didn't occur. + $err = error_get_last(); + if (!$err || ($err['type'] ^ E_ERROR)) { + $this->run(); + } + } + }); + } + } + + public function isEmpty() + { + return !$this->queue; + } + + public function add(callable $task) + { + $this->queue[] = $task; + } + + public function run() + { + /** @var callable $task */ + while ($task = array_shift($this->queue)) { + $task(); + } + } + + /** + * The task queue will be run and exhausted by default when the process + * exits IFF the exit is not the result of a PHP E_ERROR error. + * + * You can disable running the automatic shutdown of the queue by calling + * this function. If you disable the task queue shutdown process, then you + * MUST either run the task queue (as a result of running your event loop + * or manually using the run() method) or wait on each outstanding promise. + * + * Note: This shutdown will occur before any destructors are triggered. + */ + public function disableShutdown() + { + $this->enableShutdown = false; + } +} diff --git a/vendor/guzzlehttp/promises/src/TaskQueueInterface.php b/vendor/guzzlehttp/promises/src/TaskQueueInterface.php new file mode 100644 index 00000000..44357859 --- /dev/null +++ b/vendor/guzzlehttp/promises/src/TaskQueueInterface.php @@ -0,0 +1,25 @@ + + * while ($eventLoop->isRunning()) { + * GuzzleHttp\Promise\queue()->run(); + * } + * + * + * @param TaskQueueInterface $assign Optionally specify a new queue instance. + * + * @return TaskQueueInterface + */ +function queue(TaskQueueInterface $assign = null) +{ + static $queue; + + if ($assign) { + $queue = $assign; + } elseif (!$queue) { + $queue = new TaskQueue(); + } + + return $queue; +} + +/** + * Adds a function to run in the task queue when it is next `run()` and returns + * a promise that is fulfilled or rejected with the result. + * + * @param callable $task Task function to run. + * + * @return PromiseInterface + */ +function task(callable $task) +{ + $queue = queue(); + $promise = new Promise([$queue, 'run']); + $queue->add(function () use ($task, $promise) { + try { + $promise->resolve($task()); + } catch (\Throwable $e) { + $promise->reject($e); + } catch (\Exception $e) { + $promise->reject($e); + } + }); + + return $promise; +} + +/** + * Creates a promise for a value if the value is not a promise. + * + * @param mixed $value Promise or value. + * + * @return PromiseInterface + */ +function promise_for($value) +{ + if ($value instanceof PromiseInterface) { + return $value; + } + + // Return a Guzzle promise that shadows the given promise. + if (method_exists($value, 'then')) { + $wfn = method_exists($value, 'wait') ? [$value, 'wait'] : null; + $cfn = method_exists($value, 'cancel') ? [$value, 'cancel'] : null; + $promise = new Promise($wfn, $cfn); + $value->then([$promise, 'resolve'], [$promise, 'reject']); + return $promise; + } + + return new FulfilledPromise($value); +} + +/** + * Creates a rejected promise for a reason if the reason is not a promise. If + * the provided reason is a promise, then it is returned as-is. + * + * @param mixed $reason Promise or reason. + * + * @return PromiseInterface + */ +function rejection_for($reason) +{ + if ($reason instanceof PromiseInterface) { + return $reason; + } + + return new RejectedPromise($reason); +} + +/** + * Create an exception for a rejected promise value. + * + * @param mixed $reason + * + * @return \Exception|\Throwable + */ +function exception_for($reason) +{ + return $reason instanceof \Exception || $reason instanceof \Throwable + ? $reason + : new RejectionException($reason); +} + +/** + * Returns an iterator for the given value. + * + * @param mixed $value + * + * @return \Iterator + */ +function iter_for($value) +{ + if ($value instanceof \Iterator) { + return $value; + } elseif (is_array($value)) { + return new \ArrayIterator($value); + } else { + return new \ArrayIterator([$value]); + } +} + +/** + * Synchronously waits on a promise to resolve and returns an inspection state + * array. + * + * Returns a state associative array containing a "state" key mapping to a + * valid promise state. If the state of the promise is "fulfilled", the array + * will contain a "value" key mapping to the fulfilled value of the promise. If + * the promise is rejected, the array will contain a "reason" key mapping to + * the rejection reason of the promise. + * + * @param PromiseInterface $promise Promise or value. + * + * @return array + */ +function inspect(PromiseInterface $promise) +{ + try { + return [ + 'state' => PromiseInterface::FULFILLED, + 'value' => $promise->wait() + ]; + } catch (RejectionException $e) { + return ['state' => PromiseInterface::REJECTED, 'reason' => $e->getReason()]; + } catch (\Throwable $e) { + return ['state' => PromiseInterface::REJECTED, 'reason' => $e]; + } catch (\Exception $e) { + return ['state' => PromiseInterface::REJECTED, 'reason' => $e]; + } +} + +/** + * Waits on all of the provided promises, but does not unwrap rejected promises + * as thrown exception. + * + * Returns an array of inspection state arrays. + * + * @param PromiseInterface[] $promises Traversable of promises to wait upon. + * + * @return array + * @see GuzzleHttp\Promise\inspect for the inspection state array format. + */ +function inspect_all($promises) +{ + $results = []; + foreach ($promises as $key => $promise) { + $results[$key] = inspect($promise); + } + + return $results; +} + +/** + * Waits on all of the provided promises and returns the fulfilled values. + * + * Returns an array that contains the value of each promise (in the same order + * the promises were provided). An exception is thrown if any of the promises + * are rejected. + * + * @param mixed $promises Iterable of PromiseInterface objects to wait on. + * + * @return array + * @throws \Exception on error + * @throws \Throwable on error in PHP >=7 + */ +function unwrap($promises) +{ + $results = []; + foreach ($promises as $key => $promise) { + $results[$key] = $promise->wait(); + } + + return $results; +} + +/** + * Given an array of promises, return a promise that is fulfilled when all the + * items in the array are fulfilled. + * + * The promise's fulfillment value is an array with fulfillment values at + * respective positions to the original array. If any promise in the array + * rejects, the returned promise is rejected with the rejection reason. + * + * @param mixed $promises Promises or values. + * + * @return PromiseInterface + */ +function all($promises) +{ + $results = []; + return each( + $promises, + function ($value, $idx) use (&$results) { + $results[$idx] = $value; + }, + function ($reason, $idx, Promise $aggregate) { + $aggregate->reject($reason); + } + )->then(function () use (&$results) { + ksort($results); + return $results; + }); +} + +/** + * Initiate a competitive race between multiple promises or values (values will + * become immediately fulfilled promises). + * + * When count amount of promises have been fulfilled, the returned promise is + * fulfilled with an array that contains the fulfillment values of the winners + * in order of resolution. + * + * This prommise is rejected with a {@see GuzzleHttp\Promise\AggregateException} + * if the number of fulfilled promises is less than the desired $count. + * + * @param int $count Total number of promises. + * @param mixed $promises Promises or values. + * + * @return PromiseInterface + */ +function some($count, $promises) +{ + $results = []; + $rejections = []; + + return each( + $promises, + function ($value, $idx, PromiseInterface $p) use (&$results, $count) { + if ($p->getState() !== PromiseInterface::PENDING) { + return; + } + $results[$idx] = $value; + if (count($results) >= $count) { + $p->resolve(null); + } + }, + function ($reason) use (&$rejections) { + $rejections[] = $reason; + } + )->then( + function () use (&$results, &$rejections, $count) { + if (count($results) !== $count) { + throw new AggregateException( + 'Not enough promises to fulfill count', + $rejections + ); + } + ksort($results); + return array_values($results); + } + ); +} + +/** + * Like some(), with 1 as count. However, if the promise fulfills, the + * fulfillment value is not an array of 1 but the value directly. + * + * @param mixed $promises Promises or values. + * + * @return PromiseInterface + */ +function any($promises) +{ + return some(1, $promises)->then(function ($values) { return $values[0]; }); +} + +/** + * Returns a promise that is fulfilled when all of the provided promises have + * been fulfilled or rejected. + * + * The returned promise is fulfilled with an array of inspection state arrays. + * + * @param mixed $promises Promises or values. + * + * @return PromiseInterface + * @see GuzzleHttp\Promise\inspect for the inspection state array format. + */ +function settle($promises) +{ + $results = []; + + return each( + $promises, + function ($value, $idx) use (&$results) { + $results[$idx] = ['state' => PromiseInterface::FULFILLED, 'value' => $value]; + }, + function ($reason, $idx) use (&$results) { + $results[$idx] = ['state' => PromiseInterface::REJECTED, 'reason' => $reason]; + } + )->then(function () use (&$results) { + ksort($results); + return $results; + }); +} + +/** + * Given an iterator that yields promises or values, returns a promise that is + * fulfilled with a null value when the iterator has been consumed or the + * aggregate promise has been fulfilled or rejected. + * + * $onFulfilled is a function that accepts the fulfilled value, iterator + * index, and the aggregate promise. The callback can invoke any necessary side + * effects and choose to resolve or reject the aggregate promise if needed. + * + * $onRejected is a function that accepts the rejection reason, iterator + * index, and the aggregate promise. The callback can invoke any necessary side + * effects and choose to resolve or reject the aggregate promise if needed. + * + * @param mixed $iterable Iterator or array to iterate over. + * @param callable $onFulfilled + * @param callable $onRejected + * + * @return PromiseInterface + */ +function each( + $iterable, + callable $onFulfilled = null, + callable $onRejected = null +) { + return (new EachPromise($iterable, [ + 'fulfilled' => $onFulfilled, + 'rejected' => $onRejected + ]))->promise(); +} + +/** + * Like each, but only allows a certain number of outstanding promises at any + * given time. + * + * $concurrency may be an integer or a function that accepts the number of + * pending promises and returns a numeric concurrency limit value to allow for + * dynamic a concurrency size. + * + * @param mixed $iterable + * @param int|callable $concurrency + * @param callable $onFulfilled + * @param callable $onRejected + * + * @return PromiseInterface + */ +function each_limit( + $iterable, + $concurrency, + callable $onFulfilled = null, + callable $onRejected = null +) { + return (new EachPromise($iterable, [ + 'fulfilled' => $onFulfilled, + 'rejected' => $onRejected, + 'concurrency' => $concurrency + ]))->promise(); +} + +/** + * Like each_limit, but ensures that no promise in the given $iterable argument + * is rejected. If any promise is rejected, then the aggregate promise is + * rejected with the encountered rejection. + * + * @param mixed $iterable + * @param int|callable $concurrency + * @param callable $onFulfilled + * + * @return PromiseInterface + */ +function each_limit_all( + $iterable, + $concurrency, + callable $onFulfilled = null +) { + return each_limit( + $iterable, + $concurrency, + $onFulfilled, + function ($reason, $idx, PromiseInterface $aggregate) { + $aggregate->reject($reason); + } + ); +} + +/** + * Returns true if a promise is fulfilled. + * + * @param PromiseInterface $promise + * + * @return bool + */ +function is_fulfilled(PromiseInterface $promise) +{ + return $promise->getState() === PromiseInterface::FULFILLED; +} + +/** + * Returns true if a promise is rejected. + * + * @param PromiseInterface $promise + * + * @return bool + */ +function is_rejected(PromiseInterface $promise) +{ + return $promise->getState() === PromiseInterface::REJECTED; +} + +/** + * Returns true if a promise is fulfilled or rejected. + * + * @param PromiseInterface $promise + * + * @return bool + */ +function is_settled(PromiseInterface $promise) +{ + return $promise->getState() !== PromiseInterface::PENDING; +} + +/** + * @see Coroutine + * + * @param callable $generatorFn + * + * @return PromiseInterface + */ +function coroutine(callable $generatorFn) +{ + return new Coroutine($generatorFn); +} diff --git a/vendor/guzzlehttp/promises/src/functions_include.php b/vendor/guzzlehttp/promises/src/functions_include.php new file mode 100644 index 00000000..47e007c9 --- /dev/null +++ b/vendor/guzzlehttp/promises/src/functions_include.php @@ -0,0 +1,6 @@ +withPath('foo')->withHost('example.com')` will throw an exception + because the path of a URI with an authority must start with a slash "/" or be empty + - `(new Uri())->withScheme('http')` will return `'http://localhost'` + +### Deprecated + +- `Uri::resolve` in favor of `UriResolver::resolve` +- `Uri::removeDotSegments` in favor of `UriResolver::removeDotSegments` + +### Fixed + +- `Stream::read` when length parameter <= 0. +- `copy_to_stream` reads bytes in chunks instead of `maxLen` into memory. +- `ServerRequest::getUriFromGlobals` when `Host` header contains port. +- Compatibility of URIs with `file` scheme and empty host. + + +## [1.3.1] - 2016-06-25 + +### Fixed + +- `Uri::__toString` for network path references, e.g. `//example.org`. +- Missing lowercase normalization for host. +- Handling of URI components in case they are `'0'` in a lot of places, + e.g. as a user info password. +- `Uri::withAddedHeader` to correctly merge headers with different case. +- Trimming of header values in `Uri::withAddedHeader`. Header values may + be surrounded by whitespace which should be ignored according to RFC 7230 + Section 3.2.4. This does not apply to header names. +- `Uri::withAddedHeader` with an array of header values. +- `Uri::resolve` when base path has no slash and handling of fragment. +- Handling of encoding in `Uri::with(out)QueryValue` so one can pass the + key/value both in encoded as well as decoded form to those methods. This is + consistent with withPath, withQuery etc. +- `ServerRequest::withoutAttribute` when attribute value is null. + + +## [1.3.0] - 2016-04-13 + +### Added + +- Remaining interfaces needed for full PSR7 compatibility + (ServerRequestInterface, UploadedFileInterface, etc.). +- Support for stream_for from scalars. + +### Changed + +- Can now extend Uri. + +### Fixed +- A bug in validating request methods by making it more permissive. + + +## [1.2.3] - 2016-02-18 + +### Fixed + +- Support in `GuzzleHttp\Psr7\CachingStream` for seeking forward on remote + streams, which can sometimes return fewer bytes than requested with `fread`. +- Handling of gzipped responses with FNAME headers. + + +## [1.2.2] - 2016-01-22 + +### Added + +- Support for URIs without any authority. +- Support for HTTP 451 'Unavailable For Legal Reasons.' +- Support for using '0' as a filename. +- Support for including non-standard ports in Host headers. + + +## [1.2.1] - 2015-11-02 + +### Changes + +- Now supporting negative offsets when seeking to SEEK_END. + + +## [1.2.0] - 2015-08-15 + +### Changed + +- Body as `"0"` is now properly added to a response. +- Now allowing forward seeking in CachingStream. +- Now properly parsing HTTP requests that contain proxy targets in + `parse_request`. +- functions.php is now conditionally required. +- user-info is no longer dropped when resolving URIs. + + +## [1.1.0] - 2015-06-24 + +### Changed + +- URIs can now be relative. +- `multipart/form-data` headers are now overridden case-insensitively. +- URI paths no longer encode the following characters because they are allowed + in URIs: "(", ")", "*", "!", "'" +- A port is no longer added to a URI when the scheme is missing and no port is + present. + + +## 1.0.0 - 2015-05-19 + +Initial release. + +Currently unsupported: + +- `Psr\Http\Message\ServerRequestInterface` +- `Psr\Http\Message\UploadedFileInterface` + + + +[Unreleased]: https://github.com/guzzle/psr7/compare/1.6.0...HEAD +[1.6.0]: https://github.com/guzzle/psr7/compare/1.5.2...1.6.0 +[1.5.2]: https://github.com/guzzle/psr7/compare/1.5.1...1.5.2 +[1.5.1]: https://github.com/guzzle/psr7/compare/1.5.0...1.5.1 +[1.5.0]: https://github.com/guzzle/psr7/compare/1.4.2...1.5.0 +[1.4.2]: https://github.com/guzzle/psr7/compare/1.4.1...1.4.2 +[1.4.1]: https://github.com/guzzle/psr7/compare/1.4.0...1.4.1 +[1.4.0]: https://github.com/guzzle/psr7/compare/1.3.1...1.4.0 +[1.3.1]: https://github.com/guzzle/psr7/compare/1.3.0...1.3.1 +[1.3.0]: https://github.com/guzzle/psr7/compare/1.2.3...1.3.0 +[1.2.3]: https://github.com/guzzle/psr7/compare/1.2.2...1.2.3 +[1.2.2]: https://github.com/guzzle/psr7/compare/1.2.1...1.2.2 +[1.2.1]: https://github.com/guzzle/psr7/compare/1.2.0...1.2.1 +[1.2.0]: https://github.com/guzzle/psr7/compare/1.1.0...1.2.0 +[1.1.0]: https://github.com/guzzle/psr7/compare/1.0.0...1.1.0 diff --git a/vendor/guzzlehttp/psr7/LICENSE b/vendor/guzzlehttp/psr7/LICENSE new file mode 100644 index 00000000..9d3d488d --- /dev/null +++ b/vendor/guzzlehttp/psr7/LICENSE @@ -0,0 +1,19 @@ +Copyright (c) 2015 Michael Dowling, https://github.com/mtdowling + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +THE SOFTWARE. diff --git a/vendor/guzzlehttp/psr7/README.md b/vendor/guzzlehttp/psr7/README.md new file mode 100644 index 00000000..ec7cc30f --- /dev/null +++ b/vendor/guzzlehttp/psr7/README.md @@ -0,0 +1,745 @@ +# PSR-7 Message Implementation + +This repository contains a full [PSR-7](http://www.php-fig.org/psr/psr-7/) +message implementation, several stream decorators, and some helpful +functionality like query string parsing. + + +[![Build Status](https://travis-ci.org/guzzle/psr7.svg?branch=master)](https://travis-ci.org/guzzle/psr7) + + +# Stream implementation + +This package comes with a number of stream implementations and stream +decorators. + + +## AppendStream + +`GuzzleHttp\Psr7\AppendStream` + +Reads from multiple streams, one after the other. + +```php +use GuzzleHttp\Psr7; + +$a = Psr7\stream_for('abc, '); +$b = Psr7\stream_for('123.'); +$composed = new Psr7\AppendStream([$a, $b]); + +$composed->addStream(Psr7\stream_for(' Above all listen to me')); + +echo $composed; // abc, 123. Above all listen to me. +``` + + +## BufferStream + +`GuzzleHttp\Psr7\BufferStream` + +Provides a buffer stream that can be written to fill a buffer, and read +from to remove bytes from the buffer. + +This stream returns a "hwm" metadata value that tells upstream consumers +what the configured high water mark of the stream is, or the maximum +preferred size of the buffer. + +```php +use GuzzleHttp\Psr7; + +// When more than 1024 bytes are in the buffer, it will begin returning +// false to writes. This is an indication that writers should slow down. +$buffer = new Psr7\BufferStream(1024); +``` + + +## CachingStream + +The CachingStream is used to allow seeking over previously read bytes on +non-seekable streams. This can be useful when transferring a non-seekable +entity body fails due to needing to rewind the stream (for example, resulting +from a redirect). Data that is read from the remote stream will be buffered in +a PHP temp stream so that previously read bytes are cached first in memory, +then on disk. + +```php +use GuzzleHttp\Psr7; + +$original = Psr7\stream_for(fopen('http://www.google.com', 'r')); +$stream = new Psr7\CachingStream($original); + +$stream->read(1024); +echo $stream->tell(); +// 1024 + +$stream->seek(0); +echo $stream->tell(); +// 0 +``` + + +## DroppingStream + +`GuzzleHttp\Psr7\DroppingStream` + +Stream decorator that begins dropping data once the size of the underlying +stream becomes too full. + +```php +use GuzzleHttp\Psr7; + +// Create an empty stream +$stream = Psr7\stream_for(); + +// Start dropping data when the stream has more than 10 bytes +$dropping = new Psr7\DroppingStream($stream, 10); + +$dropping->write('01234567890123456789'); +echo $stream; // 0123456789 +``` + + +## FnStream + +`GuzzleHttp\Psr7\FnStream` + +Compose stream implementations based on a hash of functions. + +Allows for easy testing and extension of a provided stream without needing +to create a concrete class for a simple extension point. + +```php + +use GuzzleHttp\Psr7; + +$stream = Psr7\stream_for('hi'); +$fnStream = Psr7\FnStream::decorate($stream, [ + 'rewind' => function () use ($stream) { + echo 'About to rewind - '; + $stream->rewind(); + echo 'rewound!'; + } +]); + +$fnStream->rewind(); +// Outputs: About to rewind - rewound! +``` + + +## InflateStream + +`GuzzleHttp\Psr7\InflateStream` + +Uses PHP's zlib.inflate filter to inflate deflate or gzipped content. + +This stream decorator skips the first 10 bytes of the given stream to remove +the gzip header, converts the provided stream to a PHP stream resource, +then appends the zlib.inflate filter. The stream is then converted back +to a Guzzle stream resource to be used as a Guzzle stream. + + +## LazyOpenStream + +`GuzzleHttp\Psr7\LazyOpenStream` + +Lazily reads or writes to a file that is opened only after an IO operation +take place on the stream. + +```php +use GuzzleHttp\Psr7; + +$stream = new Psr7\LazyOpenStream('/path/to/file', 'r'); +// The file has not yet been opened... + +echo $stream->read(10); +// The file is opened and read from only when needed. +``` + + +## LimitStream + +`GuzzleHttp\Psr7\LimitStream` + +LimitStream can be used to read a subset or slice of an existing stream object. +This can be useful for breaking a large file into smaller pieces to be sent in +chunks (e.g. Amazon S3's multipart upload API). + +```php +use GuzzleHttp\Psr7; + +$original = Psr7\stream_for(fopen('/tmp/test.txt', 'r+')); +echo $original->getSize(); +// >>> 1048576 + +// Limit the size of the body to 1024 bytes and start reading from byte 2048 +$stream = new Psr7\LimitStream($original, 1024, 2048); +echo $stream->getSize(); +// >>> 1024 +echo $stream->tell(); +// >>> 0 +``` + + +## MultipartStream + +`GuzzleHttp\Psr7\MultipartStream` + +Stream that when read returns bytes for a streaming multipart or +multipart/form-data stream. + + +## NoSeekStream + +`GuzzleHttp\Psr7\NoSeekStream` + +NoSeekStream wraps a stream and does not allow seeking. + +```php +use GuzzleHttp\Psr7; + +$original = Psr7\stream_for('foo'); +$noSeek = new Psr7\NoSeekStream($original); + +echo $noSeek->read(3); +// foo +var_export($noSeek->isSeekable()); +// false +$noSeek->seek(0); +var_export($noSeek->read(3)); +// NULL +``` + + +## PumpStream + +`GuzzleHttp\Psr7\PumpStream` + +Provides a read only stream that pumps data from a PHP callable. + +When invoking the provided callable, the PumpStream will pass the amount of +data requested to read to the callable. The callable can choose to ignore +this value and return fewer or more bytes than requested. Any extra data +returned by the provided callable is buffered internally until drained using +the read() function of the PumpStream. The provided callable MUST return +false when there is no more data to read. + + +## Implementing stream decorators + +Creating a stream decorator is very easy thanks to the +`GuzzleHttp\Psr7\StreamDecoratorTrait`. This trait provides methods that +implement `Psr\Http\Message\StreamInterface` by proxying to an underlying +stream. Just `use` the `StreamDecoratorTrait` and implement your custom +methods. + +For example, let's say we wanted to call a specific function each time the last +byte is read from a stream. This could be implemented by overriding the +`read()` method. + +```php +use Psr\Http\Message\StreamInterface; +use GuzzleHttp\Psr7\StreamDecoratorTrait; + +class EofCallbackStream implements StreamInterface +{ + use StreamDecoratorTrait; + + private $callback; + + public function __construct(StreamInterface $stream, callable $cb) + { + $this->stream = $stream; + $this->callback = $cb; + } + + public function read($length) + { + $result = $this->stream->read($length); + + // Invoke the callback when EOF is hit. + if ($this->eof()) { + call_user_func($this->callback); + } + + return $result; + } +} +``` + +This decorator could be added to any existing stream and used like so: + +```php +use GuzzleHttp\Psr7; + +$original = Psr7\stream_for('foo'); + +$eofStream = new EofCallbackStream($original, function () { + echo 'EOF!'; +}); + +$eofStream->read(2); +$eofStream->read(1); +// echoes "EOF!" +$eofStream->seek(0); +$eofStream->read(3); +// echoes "EOF!" +``` + + +## PHP StreamWrapper + +You can use the `GuzzleHttp\Psr7\StreamWrapper` class if you need to use a +PSR-7 stream as a PHP stream resource. + +Use the `GuzzleHttp\Psr7\StreamWrapper::getResource()` method to create a PHP +stream from a PSR-7 stream. + +```php +use GuzzleHttp\Psr7\StreamWrapper; + +$stream = GuzzleHttp\Psr7\stream_for('hello!'); +$resource = StreamWrapper::getResource($stream); +echo fread($resource, 6); // outputs hello! +``` + + +# Function API + +There are various functions available under the `GuzzleHttp\Psr7` namespace. + + +## `function str` + +`function str(MessageInterface $message)` + +Returns the string representation of an HTTP message. + +```php +$request = new GuzzleHttp\Psr7\Request('GET', 'http://example.com'); +echo GuzzleHttp\Psr7\str($request); +``` + + +## `function uri_for` + +`function uri_for($uri)` + +This function accepts a string or `Psr\Http\Message\UriInterface` and returns a +UriInterface for the given value. If the value is already a `UriInterface`, it +is returned as-is. + +```php +$uri = GuzzleHttp\Psr7\uri_for('http://example.com'); +assert($uri === GuzzleHttp\Psr7\uri_for($uri)); +``` + + +## `function stream_for` + +`function stream_for($resource = '', array $options = [])` + +Create a new stream based on the input type. + +Options is an associative array that can contain the following keys: + +* - metadata: Array of custom metadata. +* - size: Size of the stream. + +This method accepts the following `$resource` types: + +- `Psr\Http\Message\StreamInterface`: Returns the value as-is. +- `string`: Creates a stream object that uses the given string as the contents. +- `resource`: Creates a stream object that wraps the given PHP stream resource. +- `Iterator`: If the provided value implements `Iterator`, then a read-only + stream object will be created that wraps the given iterable. Each time the + stream is read from, data from the iterator will fill a buffer and will be + continuously called until the buffer is equal to the requested read size. + Subsequent read calls will first read from the buffer and then call `next` + on the underlying iterator until it is exhausted. +- `object` with `__toString()`: If the object has the `__toString()` method, + the object will be cast to a string and then a stream will be returned that + uses the string value. +- `NULL`: When `null` is passed, an empty stream object is returned. +- `callable` When a callable is passed, a read-only stream object will be + created that invokes the given callable. The callable is invoked with the + number of suggested bytes to read. The callable can return any number of + bytes, but MUST return `false` when there is no more data to return. The + stream object that wraps the callable will invoke the callable until the + number of requested bytes are available. Any additional bytes will be + buffered and used in subsequent reads. + +```php +$stream = GuzzleHttp\Psr7\stream_for('foo'); +$stream = GuzzleHttp\Psr7\stream_for(fopen('/path/to/file', 'r')); + +$generator = function ($bytes) { + for ($i = 0; $i < $bytes; $i++) { + yield ' '; + } +} + +$stream = GuzzleHttp\Psr7\stream_for($generator(100)); +``` + + +## `function parse_header` + +`function parse_header($header)` + +Parse an array of header values containing ";" separated data into an array of +associative arrays representing the header key value pair data of the header. +When a parameter does not contain a value, but just contains a key, this +function will inject a key with a '' string value. + + +## `function normalize_header` + +`function normalize_header($header)` + +Converts an array of header values that may contain comma separated headers +into an array of headers with no comma separated values. + + +## `function modify_request` + +`function modify_request(RequestInterface $request, array $changes)` + +Clone and modify a request with the given changes. This method is useful for +reducing the number of clones needed to mutate a message. + +The changes can be one of: + +- method: (string) Changes the HTTP method. +- set_headers: (array) Sets the given headers. +- remove_headers: (array) Remove the given headers. +- body: (mixed) Sets the given body. +- uri: (UriInterface) Set the URI. +- query: (string) Set the query string value of the URI. +- version: (string) Set the protocol version. + + +## `function rewind_body` + +`function rewind_body(MessageInterface $message)` + +Attempts to rewind a message body and throws an exception on failure. The body +of the message will only be rewound if a call to `tell()` returns a value other +than `0`. + + +## `function try_fopen` + +`function try_fopen($filename, $mode)` + +Safely opens a PHP stream resource using a filename. + +When fopen fails, PHP normally raises a warning. This function adds an error +handler that checks for errors and throws an exception instead. + + +## `function copy_to_string` + +`function copy_to_string(StreamInterface $stream, $maxLen = -1)` + +Copy the contents of a stream into a string until the given number of bytes +have been read. + + +## `function copy_to_stream` + +`function copy_to_stream(StreamInterface $source, StreamInterface $dest, $maxLen = -1)` + +Copy the contents of a stream into another stream until the given number of +bytes have been read. + + +## `function hash` + +`function hash(StreamInterface $stream, $algo, $rawOutput = false)` + +Calculate a hash of a Stream. This method reads the entire stream to calculate +a rolling hash (based on PHP's hash_init functions). + + +## `function readline` + +`function readline(StreamInterface $stream, $maxLength = null)` + +Read a line from the stream up to the maximum allowed buffer length. + + +## `function parse_request` + +`function parse_request($message)` + +Parses a request message string into a request object. + + +## `function parse_response` + +`function parse_response($message)` + +Parses a response message string into a response object. + + +## `function parse_query` + +`function parse_query($str, $urlEncoding = true)` + +Parse a query string into an associative array. + +If multiple values are found for the same key, the value of that key value pair +will become an array. This function does not parse nested PHP style arrays into +an associative array (e.g., `foo[a]=1&foo[b]=2` will be parsed into +`['foo[a]' => '1', 'foo[b]' => '2']`). + + +## `function build_query` + +`function build_query(array $params, $encoding = PHP_QUERY_RFC3986)` + +Build a query string from an array of key value pairs. + +This function can use the return value of parse_query() to build a query string. +This function does not modify the provided keys when an array is encountered +(like http_build_query would). + + +## `function mimetype_from_filename` + +`function mimetype_from_filename($filename)` + +Determines the mimetype of a file by looking at its extension. + + +## `function mimetype_from_extension` + +`function mimetype_from_extension($extension)` + +Maps a file extensions to a mimetype. + + +# Additional URI Methods + +Aside from the standard `Psr\Http\Message\UriInterface` implementation in form of the `GuzzleHttp\Psr7\Uri` class, +this library also provides additional functionality when working with URIs as static methods. + +## URI Types + +An instance of `Psr\Http\Message\UriInterface` can either be an absolute URI or a relative reference. +An absolute URI has a scheme. A relative reference is used to express a URI relative to another URI, +the base URI. Relative references can be divided into several forms according to +[RFC 3986 Section 4.2](https://tools.ietf.org/html/rfc3986#section-4.2): + +- network-path references, e.g. `//example.com/path` +- absolute-path references, e.g. `/path` +- relative-path references, e.g. `subpath` + +The following methods can be used to identify the type of the URI. + +### `GuzzleHttp\Psr7\Uri::isAbsolute` + +`public static function isAbsolute(UriInterface $uri): bool` + +Whether the URI is absolute, i.e. it has a scheme. + +### `GuzzleHttp\Psr7\Uri::isNetworkPathReference` + +`public static function isNetworkPathReference(UriInterface $uri): bool` + +Whether the URI is a network-path reference. A relative reference that begins with two slash characters is +termed an network-path reference. + +### `GuzzleHttp\Psr7\Uri::isAbsolutePathReference` + +`public static function isAbsolutePathReference(UriInterface $uri): bool` + +Whether the URI is a absolute-path reference. A relative reference that begins with a single slash character is +termed an absolute-path reference. + +### `GuzzleHttp\Psr7\Uri::isRelativePathReference` + +`public static function isRelativePathReference(UriInterface $uri): bool` + +Whether the URI is a relative-path reference. A relative reference that does not begin with a slash character is +termed a relative-path reference. + +### `GuzzleHttp\Psr7\Uri::isSameDocumentReference` + +`public static function isSameDocumentReference(UriInterface $uri, UriInterface $base = null): bool` + +Whether the URI is a same-document reference. A same-document reference refers to a URI that is, aside from its +fragment component, identical to the base URI. When no base URI is given, only an empty URI reference +(apart from its fragment) is considered a same-document reference. + +## URI Components + +Additional methods to work with URI components. + +### `GuzzleHttp\Psr7\Uri::isDefaultPort` + +`public static function isDefaultPort(UriInterface $uri): bool` + +Whether the URI has the default port of the current scheme. `Psr\Http\Message\UriInterface::getPort` may return null +or the standard port. This method can be used independently of the implementation. + +### `GuzzleHttp\Psr7\Uri::composeComponents` + +`public static function composeComponents($scheme, $authority, $path, $query, $fragment): string` + +Composes a URI reference string from its various components according to +[RFC 3986 Section 5.3](https://tools.ietf.org/html/rfc3986#section-5.3). Usually this method does not need to be called +manually but instead is used indirectly via `Psr\Http\Message\UriInterface::__toString`. + +### `GuzzleHttp\Psr7\Uri::fromParts` + +`public static function fromParts(array $parts): UriInterface` + +Creates a URI from a hash of [`parse_url`](http://php.net/manual/en/function.parse-url.php) components. + + +### `GuzzleHttp\Psr7\Uri::withQueryValue` + +`public static function withQueryValue(UriInterface $uri, $key, $value): UriInterface` + +Creates a new URI with a specific query string value. Any existing query string values that exactly match the +provided key are removed and replaced with the given key value pair. A value of null will set the query string +key without a value, e.g. "key" instead of "key=value". + +### `GuzzleHttp\Psr7\Uri::withQueryValues` + +`public static function withQueryValues(UriInterface $uri, array $keyValueArray): UriInterface` + +Creates a new URI with multiple query string values. It has the same behavior as `withQueryValue()` but for an +associative array of key => value. + +### `GuzzleHttp\Psr7\Uri::withoutQueryValue` + +`public static function withoutQueryValue(UriInterface $uri, $key): UriInterface` + +Creates a new URI with a specific query string value removed. Any existing query string values that exactly match the +provided key are removed. + +## Reference Resolution + +`GuzzleHttp\Psr7\UriResolver` provides methods to resolve a URI reference in the context of a base URI according +to [RFC 3986 Section 5](https://tools.ietf.org/html/rfc3986#section-5). This is for example also what web browsers +do when resolving a link in a website based on the current request URI. + +### `GuzzleHttp\Psr7\UriResolver::resolve` + +`public static function resolve(UriInterface $base, UriInterface $rel): UriInterface` + +Converts the relative URI into a new URI that is resolved against the base URI. + +### `GuzzleHttp\Psr7\UriResolver::removeDotSegments` + +`public static function removeDotSegments(string $path): string` + +Removes dot segments from a path and returns the new path according to +[RFC 3986 Section 5.2.4](https://tools.ietf.org/html/rfc3986#section-5.2.4). + +### `GuzzleHttp\Psr7\UriResolver::relativize` + +`public static function relativize(UriInterface $base, UriInterface $target): UriInterface` + +Returns the target URI as a relative reference from the base URI. This method is the counterpart to resolve(): + +```php +(string) $target === (string) UriResolver::resolve($base, UriResolver::relativize($base, $target)) +``` + +One use-case is to use the current request URI as base URI and then generate relative links in your documents +to reduce the document size or offer self-contained downloadable document archives. + +```php +$base = new Uri('http://example.com/a/b/'); +echo UriResolver::relativize($base, new Uri('http://example.com/a/b/c')); // prints 'c'. +echo UriResolver::relativize($base, new Uri('http://example.com/a/x/y')); // prints '../x/y'. +echo UriResolver::relativize($base, new Uri('http://example.com/a/b/?q')); // prints '?q'. +echo UriResolver::relativize($base, new Uri('http://example.org/a/b/')); // prints '//example.org/a/b/'. +``` + +## Normalization and Comparison + +`GuzzleHttp\Psr7\UriNormalizer` provides methods to normalize and compare URIs according to +[RFC 3986 Section 6](https://tools.ietf.org/html/rfc3986#section-6). + +### `GuzzleHttp\Psr7\UriNormalizer::normalize` + +`public static function normalize(UriInterface $uri, $flags = self::PRESERVING_NORMALIZATIONS): UriInterface` + +Returns a normalized URI. The scheme and host component are already normalized to lowercase per PSR-7 UriInterface. +This methods adds additional normalizations that can be configured with the `$flags` parameter which is a bitmask +of normalizations to apply. The following normalizations are available: + +- `UriNormalizer::PRESERVING_NORMALIZATIONS` + + Default normalizations which only include the ones that preserve semantics. + +- `UriNormalizer::CAPITALIZE_PERCENT_ENCODING` + + All letters within a percent-encoding triplet (e.g., "%3A") are case-insensitive, and should be capitalized. + + Example: `http://example.org/a%c2%b1b` → `http://example.org/a%C2%B1b` + +- `UriNormalizer::DECODE_UNRESERVED_CHARACTERS` + + Decodes percent-encoded octets of unreserved characters. For consistency, percent-encoded octets in the ranges of + ALPHA (%41–%5A and %61–%7A), DIGIT (%30–%39), hyphen (%2D), period (%2E), underscore (%5F), or tilde (%7E) should + not be created by URI producers and, when found in a URI, should be decoded to their corresponding unreserved + characters by URI normalizers. + + Example: `http://example.org/%7Eusern%61me/` → `http://example.org/~username/` + +- `UriNormalizer::CONVERT_EMPTY_PATH` + + Converts the empty path to "/" for http and https URIs. + + Example: `http://example.org` → `http://example.org/` + +- `UriNormalizer::REMOVE_DEFAULT_HOST` + + Removes the default host of the given URI scheme from the URI. Only the "file" scheme defines the default host + "localhost". All of `file:/myfile`, `file:///myfile`, and `file://localhost/myfile` are equivalent according to + RFC 3986. + + Example: `file://localhost/myfile` → `file:///myfile` + +- `UriNormalizer::REMOVE_DEFAULT_PORT` + + Removes the default port of the given URI scheme from the URI. + + Example: `http://example.org:80/` → `http://example.org/` + +- `UriNormalizer::REMOVE_DOT_SEGMENTS` + + Removes unnecessary dot-segments. Dot-segments in relative-path references are not removed as it would + change the semantics of the URI reference. + + Example: `http://example.org/../a/b/../c/./d.html` → `http://example.org/a/c/d.html` + +- `UriNormalizer::REMOVE_DUPLICATE_SLASHES` + + Paths which include two or more adjacent slashes are converted to one. Webservers usually ignore duplicate slashes + and treat those URIs equivalent. But in theory those URIs do not need to be equivalent. So this normalization + may change the semantics. Encoded slashes (%2F) are not removed. + + Example: `http://example.org//foo///bar.html` → `http://example.org/foo/bar.html` + +- `UriNormalizer::SORT_QUERY_PARAMETERS` + + Sort query parameters with their values in alphabetical order. However, the order of parameters in a URI may be + significant (this is not defined by the standard). So this normalization is not safe and may change the semantics + of the URI. + + Example: `?lang=en&article=fred` → `?article=fred&lang=en` + +### `GuzzleHttp\Psr7\UriNormalizer::isEquivalent` + +`public static function isEquivalent(UriInterface $uri1, UriInterface $uri2, $normalizations = self::PRESERVING_NORMALIZATIONS): bool` + +Whether two URIs can be considered equivalent. Both URIs are normalized automatically before comparison with the given +`$normalizations` bitmask. The method also accepts relative URI references and returns true when they are equivalent. +This of course assumes they will be resolved against the same base URI. If this is not the case, determination of +equivalence or difference of relative references does not mean anything. diff --git a/vendor/guzzlehttp/psr7/composer.json b/vendor/guzzlehttp/psr7/composer.json new file mode 100644 index 00000000..109cc893 --- /dev/null +++ b/vendor/guzzlehttp/psr7/composer.json @@ -0,0 +1,49 @@ +{ + "name": "guzzlehttp/psr7", + "type": "library", + "description": "PSR-7 message implementation that also provides common utility methods", + "keywords": ["request", "response", "message", "stream", "http", "uri", "url", "psr-7"], + "license": "MIT", + "authors": [ + { + "name": "Michael Dowling", + "email": "mtdowling@gmail.com", + "homepage": "https://github.com/mtdowling" + }, + { + "name": "Tobias Schultze", + "homepage": "https://github.com/Tobion" + } + ], + "require": { + "php": ">=5.4.0", + "psr/http-message": "~1.0", + "ralouphie/getallheaders": "^2.0.5 || ^3.0.0" + }, + "require-dev": { + "phpunit/phpunit": "~4.8.36 || ^5.7.27 || ^6.5.8", + "ext-zlib": "*" + }, + "provide": { + "psr/http-message-implementation": "1.0" + }, + "suggest": { + "zendframework/zend-httphandlerrunner": "Emit PSR-7 responses" + }, + "autoload": { + "psr-4": { + "GuzzleHttp\\Psr7\\": "src/" + }, + "files": ["src/functions_include.php"] + }, + "autoload-dev": { + "psr-4": { + "GuzzleHttp\\Tests\\Psr7\\": "tests/" + } + }, + "extra": { + "branch-alias": { + "dev-master": "1.6-dev" + } + } +} diff --git a/vendor/guzzlehttp/psr7/src/AppendStream.php b/vendor/guzzlehttp/psr7/src/AppendStream.php new file mode 100644 index 00000000..9fae35e1 --- /dev/null +++ b/vendor/guzzlehttp/psr7/src/AppendStream.php @@ -0,0 +1,241 @@ +addStream($stream); + } + } + + public function __toString() + { + try { + $this->rewind(); + return $this->getContents(); + } catch (\Exception $e) { + return ''; + } + } + + /** + * Add a stream to the AppendStream + * + * @param StreamInterface $stream Stream to append. Must be readable. + * + * @throws \InvalidArgumentException if the stream is not readable + */ + public function addStream(StreamInterface $stream) + { + if (!$stream->isReadable()) { + throw new \InvalidArgumentException('Each stream must be readable'); + } + + // The stream is only seekable if all streams are seekable + if (!$stream->isSeekable()) { + $this->seekable = false; + } + + $this->streams[] = $stream; + } + + public function getContents() + { + return copy_to_string($this); + } + + /** + * Closes each attached stream. + * + * {@inheritdoc} + */ + public function close() + { + $this->pos = $this->current = 0; + $this->seekable = true; + + foreach ($this->streams as $stream) { + $stream->close(); + } + + $this->streams = []; + } + + /** + * Detaches each attached stream. + * + * Returns null as it's not clear which underlying stream resource to return. + * + * {@inheritdoc} + */ + public function detach() + { + $this->pos = $this->current = 0; + $this->seekable = true; + + foreach ($this->streams as $stream) { + $stream->detach(); + } + + $this->streams = []; + } + + public function tell() + { + return $this->pos; + } + + /** + * Tries to calculate the size by adding the size of each stream. + * + * If any of the streams do not return a valid number, then the size of the + * append stream cannot be determined and null is returned. + * + * {@inheritdoc} + */ + public function getSize() + { + $size = 0; + + foreach ($this->streams as $stream) { + $s = $stream->getSize(); + if ($s === null) { + return null; + } + $size += $s; + } + + return $size; + } + + public function eof() + { + return !$this->streams || + ($this->current >= count($this->streams) - 1 && + $this->streams[$this->current]->eof()); + } + + public function rewind() + { + $this->seek(0); + } + + /** + * Attempts to seek to the given position. Only supports SEEK_SET. + * + * {@inheritdoc} + */ + public function seek($offset, $whence = SEEK_SET) + { + if (!$this->seekable) { + throw new \RuntimeException('This AppendStream is not seekable'); + } elseif ($whence !== SEEK_SET) { + throw new \RuntimeException('The AppendStream can only seek with SEEK_SET'); + } + + $this->pos = $this->current = 0; + + // Rewind each stream + foreach ($this->streams as $i => $stream) { + try { + $stream->rewind(); + } catch (\Exception $e) { + throw new \RuntimeException('Unable to seek stream ' + . $i . ' of the AppendStream', 0, $e); + } + } + + // Seek to the actual position by reading from each stream + while ($this->pos < $offset && !$this->eof()) { + $result = $this->read(min(8096, $offset - $this->pos)); + if ($result === '') { + break; + } + } + } + + /** + * Reads from all of the appended streams until the length is met or EOF. + * + * {@inheritdoc} + */ + public function read($length) + { + $buffer = ''; + $total = count($this->streams) - 1; + $remaining = $length; + $progressToNext = false; + + while ($remaining > 0) { + + // Progress to the next stream if needed. + if ($progressToNext || $this->streams[$this->current]->eof()) { + $progressToNext = false; + if ($this->current === $total) { + break; + } + $this->current++; + } + + $result = $this->streams[$this->current]->read($remaining); + + // Using a loose comparison here to match on '', false, and null + if ($result == null) { + $progressToNext = true; + continue; + } + + $buffer .= $result; + $remaining = $length - strlen($buffer); + } + + $this->pos += strlen($buffer); + + return $buffer; + } + + public function isReadable() + { + return true; + } + + public function isWritable() + { + return false; + } + + public function isSeekable() + { + return $this->seekable; + } + + public function write($string) + { + throw new \RuntimeException('Cannot write to an AppendStream'); + } + + public function getMetadata($key = null) + { + return $key ? null : []; + } +} diff --git a/vendor/guzzlehttp/psr7/src/BufferStream.php b/vendor/guzzlehttp/psr7/src/BufferStream.php new file mode 100644 index 00000000..cc8a1dc8 --- /dev/null +++ b/vendor/guzzlehttp/psr7/src/BufferStream.php @@ -0,0 +1,137 @@ +hwm = $hwm; + } + + public function __toString() + { + return $this->getContents(); + } + + public function getContents() + { + $buffer = $this->buffer; + $this->buffer = ''; + + return $buffer; + } + + public function close() + { + $this->buffer = ''; + } + + public function detach() + { + $this->close(); + } + + public function getSize() + { + return strlen($this->buffer); + } + + public function isReadable() + { + return true; + } + + public function isWritable() + { + return true; + } + + public function isSeekable() + { + return false; + } + + public function rewind() + { + $this->seek(0); + } + + public function seek($offset, $whence = SEEK_SET) + { + throw new \RuntimeException('Cannot seek a BufferStream'); + } + + public function eof() + { + return strlen($this->buffer) === 0; + } + + public function tell() + { + throw new \RuntimeException('Cannot determine the position of a BufferStream'); + } + + /** + * Reads data from the buffer. + */ + public function read($length) + { + $currentLength = strlen($this->buffer); + + if ($length >= $currentLength) { + // No need to slice the buffer because we don't have enough data. + $result = $this->buffer; + $this->buffer = ''; + } else { + // Slice up the result to provide a subset of the buffer. + $result = substr($this->buffer, 0, $length); + $this->buffer = substr($this->buffer, $length); + } + + return $result; + } + + /** + * Writes data to the buffer. + */ + public function write($string) + { + $this->buffer .= $string; + + // TODO: What should happen here? + if (strlen($this->buffer) >= $this->hwm) { + return false; + } + + return strlen($string); + } + + public function getMetadata($key = null) + { + if ($key == 'hwm') { + return $this->hwm; + } + + return $key ? null : []; + } +} diff --git a/vendor/guzzlehttp/psr7/src/CachingStream.php b/vendor/guzzlehttp/psr7/src/CachingStream.php new file mode 100644 index 00000000..06c00ca8 --- /dev/null +++ b/vendor/guzzlehttp/psr7/src/CachingStream.php @@ -0,0 +1,138 @@ +remoteStream = $stream; + $this->stream = $target ?: new Stream(fopen('php://temp', 'r+')); + } + + public function getSize() + { + return max($this->stream->getSize(), $this->remoteStream->getSize()); + } + + public function rewind() + { + $this->seek(0); + } + + public function seek($offset, $whence = SEEK_SET) + { + if ($whence == SEEK_SET) { + $byte = $offset; + } elseif ($whence == SEEK_CUR) { + $byte = $offset + $this->tell(); + } elseif ($whence == SEEK_END) { + $size = $this->remoteStream->getSize(); + if ($size === null) { + $size = $this->cacheEntireStream(); + } + $byte = $size + $offset; + } else { + throw new \InvalidArgumentException('Invalid whence'); + } + + $diff = $byte - $this->stream->getSize(); + + if ($diff > 0) { + // Read the remoteStream until we have read in at least the amount + // of bytes requested, or we reach the end of the file. + while ($diff > 0 && !$this->remoteStream->eof()) { + $this->read($diff); + $diff = $byte - $this->stream->getSize(); + } + } else { + // We can just do a normal seek since we've already seen this byte. + $this->stream->seek($byte); + } + } + + public function read($length) + { + // Perform a regular read on any previously read data from the buffer + $data = $this->stream->read($length); + $remaining = $length - strlen($data); + + // More data was requested so read from the remote stream + if ($remaining) { + // If data was written to the buffer in a position that would have + // been filled from the remote stream, then we must skip bytes on + // the remote stream to emulate overwriting bytes from that + // position. This mimics the behavior of other PHP stream wrappers. + $remoteData = $this->remoteStream->read( + $remaining + $this->skipReadBytes + ); + + if ($this->skipReadBytes) { + $len = strlen($remoteData); + $remoteData = substr($remoteData, $this->skipReadBytes); + $this->skipReadBytes = max(0, $this->skipReadBytes - $len); + } + + $data .= $remoteData; + $this->stream->write($remoteData); + } + + return $data; + } + + public function write($string) + { + // When appending to the end of the currently read stream, you'll want + // to skip bytes from being read from the remote stream to emulate + // other stream wrappers. Basically replacing bytes of data of a fixed + // length. + $overflow = (strlen($string) + $this->tell()) - $this->remoteStream->tell(); + if ($overflow > 0) { + $this->skipReadBytes += $overflow; + } + + return $this->stream->write($string); + } + + public function eof() + { + return $this->stream->eof() && $this->remoteStream->eof(); + } + + /** + * Close both the remote stream and buffer stream + */ + public function close() + { + $this->remoteStream->close() && $this->stream->close(); + } + + private function cacheEntireStream() + { + $target = new FnStream(['write' => 'strlen']); + copy_to_stream($this, $target); + + return $this->tell(); + } +} diff --git a/vendor/guzzlehttp/psr7/src/DroppingStream.php b/vendor/guzzlehttp/psr7/src/DroppingStream.php new file mode 100644 index 00000000..24da16a4 --- /dev/null +++ b/vendor/guzzlehttp/psr7/src/DroppingStream.php @@ -0,0 +1,42 @@ +stream = $stream; + $this->maxLength = $maxLength; + } + + public function write($string) + { + $diff = $this->maxLength - $this->stream->getSize(); + + // Begin returning 0 when the underlying stream is too large. + if ($diff <= 0) { + return 0; + } + + // Write the stream or a subset of the stream if needed. + if (strlen($string) < $diff) { + return $this->stream->write($string); + } + + return $this->stream->write(substr($string, 0, $diff)); + } +} diff --git a/vendor/guzzlehttp/psr7/src/FnStream.php b/vendor/guzzlehttp/psr7/src/FnStream.php new file mode 100644 index 00000000..1b487652 --- /dev/null +++ b/vendor/guzzlehttp/psr7/src/FnStream.php @@ -0,0 +1,158 @@ +methods = $methods; + + // Create the functions on the class + foreach ($methods as $name => $fn) { + $this->{'_fn_' . $name} = $fn; + } + } + + /** + * Lazily determine which methods are not implemented. + * @throws \BadMethodCallException + */ + public function __get($name) + { + throw new \BadMethodCallException(str_replace('_fn_', '', $name) + . '() is not implemented in the FnStream'); + } + + /** + * The close method is called on the underlying stream only if possible. + */ + public function __destruct() + { + if (isset($this->_fn_close)) { + call_user_func($this->_fn_close); + } + } + + /** + * An unserialize would allow the __destruct to run when the unserialized value goes out of scope. + * @throws \LogicException + */ + public function __wakeup() + { + throw new \LogicException('FnStream should never be unserialized'); + } + + /** + * Adds custom functionality to an underlying stream by intercepting + * specific method calls. + * + * @param StreamInterface $stream Stream to decorate + * @param array $methods Hash of method name to a closure + * + * @return FnStream + */ + public static function decorate(StreamInterface $stream, array $methods) + { + // If any of the required methods were not provided, then simply + // proxy to the decorated stream. + foreach (array_diff(self::$slots, array_keys($methods)) as $diff) { + $methods[$diff] = [$stream, $diff]; + } + + return new self($methods); + } + + public function __toString() + { + return call_user_func($this->_fn___toString); + } + + public function close() + { + return call_user_func($this->_fn_close); + } + + public function detach() + { + return call_user_func($this->_fn_detach); + } + + public function getSize() + { + return call_user_func($this->_fn_getSize); + } + + public function tell() + { + return call_user_func($this->_fn_tell); + } + + public function eof() + { + return call_user_func($this->_fn_eof); + } + + public function isSeekable() + { + return call_user_func($this->_fn_isSeekable); + } + + public function rewind() + { + call_user_func($this->_fn_rewind); + } + + public function seek($offset, $whence = SEEK_SET) + { + call_user_func($this->_fn_seek, $offset, $whence); + } + + public function isWritable() + { + return call_user_func($this->_fn_isWritable); + } + + public function write($string) + { + return call_user_func($this->_fn_write, $string); + } + + public function isReadable() + { + return call_user_func($this->_fn_isReadable); + } + + public function read($length) + { + return call_user_func($this->_fn_read, $length); + } + + public function getContents() + { + return call_user_func($this->_fn_getContents); + } + + public function getMetadata($key = null) + { + return call_user_func($this->_fn_getMetadata, $key); + } +} diff --git a/vendor/guzzlehttp/psr7/src/InflateStream.php b/vendor/guzzlehttp/psr7/src/InflateStream.php new file mode 100644 index 00000000..7f1578b0 --- /dev/null +++ b/vendor/guzzlehttp/psr7/src/InflateStream.php @@ -0,0 +1,52 @@ +read(10); + $filenameHeaderLength = $this->getLengthOfPossibleFilenameHeader($stream, $header); + // Skip the header, that is 10 + length of filename + 1 (nil) bytes + $stream = new LimitStream($stream, -1, 10 + $filenameHeaderLength); + $resource = StreamWrapper::getResource($stream); + stream_filter_append($resource, 'zlib.inflate', STREAM_FILTER_READ); + $this->stream = $stream->isSeekable() ? new Stream($resource) : new NoSeekStream(new Stream($resource)); + } + + /** + * @param StreamInterface $stream + * @param $header + * @return int + */ + private function getLengthOfPossibleFilenameHeader(StreamInterface $stream, $header) + { + $filename_header_length = 0; + + if (substr(bin2hex($header), 6, 2) === '08') { + // we have a filename, read until nil + $filename_header_length = 1; + while ($stream->read(1) !== chr(0)) { + $filename_header_length++; + } + } + + return $filename_header_length; + } +} diff --git a/vendor/guzzlehttp/psr7/src/LazyOpenStream.php b/vendor/guzzlehttp/psr7/src/LazyOpenStream.php new file mode 100644 index 00000000..42f077f6 --- /dev/null +++ b/vendor/guzzlehttp/psr7/src/LazyOpenStream.php @@ -0,0 +1,39 @@ +filename = $filename; + $this->mode = $mode; + } + + /** + * Creates the underlying stream lazily when required. + * + * @return StreamInterface + */ + protected function createStream() + { + return stream_for(try_fopen($this->filename, $this->mode)); + } +} diff --git a/vendor/guzzlehttp/psr7/src/LimitStream.php b/vendor/guzzlehttp/psr7/src/LimitStream.php new file mode 100644 index 00000000..5b5c42bf --- /dev/null +++ b/vendor/guzzlehttp/psr7/src/LimitStream.php @@ -0,0 +1,155 @@ +stream = $stream; + $this->setLimit($limit); + $this->setOffset($offset); + } + + public function eof() + { + // Always return true if the underlying stream is EOF + if ($this->stream->eof()) { + return true; + } + + // No limit and the underlying stream is not at EOF + if ($this->limit == -1) { + return false; + } + + return $this->stream->tell() >= $this->offset + $this->limit; + } + + /** + * Returns the size of the limited subset of data + * {@inheritdoc} + */ + public function getSize() + { + if (null === ($length = $this->stream->getSize())) { + return null; + } elseif ($this->limit == -1) { + return $length - $this->offset; + } else { + return min($this->limit, $length - $this->offset); + } + } + + /** + * Allow for a bounded seek on the read limited stream + * {@inheritdoc} + */ + public function seek($offset, $whence = SEEK_SET) + { + if ($whence !== SEEK_SET || $offset < 0) { + throw new \RuntimeException(sprintf( + 'Cannot seek to offset %s with whence %s', + $offset, + $whence + )); + } + + $offset += $this->offset; + + if ($this->limit !== -1) { + if ($offset > $this->offset + $this->limit) { + $offset = $this->offset + $this->limit; + } + } + + $this->stream->seek($offset); + } + + /** + * Give a relative tell() + * {@inheritdoc} + */ + public function tell() + { + return $this->stream->tell() - $this->offset; + } + + /** + * Set the offset to start limiting from + * + * @param int $offset Offset to seek to and begin byte limiting from + * + * @throws \RuntimeException if the stream cannot be seeked. + */ + public function setOffset($offset) + { + $current = $this->stream->tell(); + + if ($current !== $offset) { + // If the stream cannot seek to the offset position, then read to it + if ($this->stream->isSeekable()) { + $this->stream->seek($offset); + } elseif ($current > $offset) { + throw new \RuntimeException("Could not seek to stream offset $offset"); + } else { + $this->stream->read($offset - $current); + } + } + + $this->offset = $offset; + } + + /** + * Set the limit of bytes that the decorator allows to be read from the + * stream. + * + * @param int $limit Number of bytes to allow to be read from the stream. + * Use -1 for no limit. + */ + public function setLimit($limit) + { + $this->limit = $limit; + } + + public function read($length) + { + if ($this->limit == -1) { + return $this->stream->read($length); + } + + // Check if the current position is less than the total allowed + // bytes + original offset + $remaining = ($this->offset + $this->limit) - $this->stream->tell(); + if ($remaining > 0) { + // Only return the amount of requested data, ensuring that the byte + // limit is not exceeded + return $this->stream->read(min($remaining, $length)); + } + + return ''; + } +} diff --git a/vendor/guzzlehttp/psr7/src/MessageTrait.php b/vendor/guzzlehttp/psr7/src/MessageTrait.php new file mode 100644 index 00000000..961d17f1 --- /dev/null +++ b/vendor/guzzlehttp/psr7/src/MessageTrait.php @@ -0,0 +1,213 @@ + array of values */ + private $headers = []; + + /** @var array Map of lowercase header name => original name at registration */ + private $headerNames = []; + + /** @var string */ + private $protocol = '1.1'; + + /** @var StreamInterface */ + private $stream; + + public function getProtocolVersion() + { + return $this->protocol; + } + + public function withProtocolVersion($version) + { + if ($this->protocol === $version) { + return $this; + } + + $new = clone $this; + $new->protocol = $version; + return $new; + } + + public function getHeaders() + { + return $this->headers; + } + + public function hasHeader($header) + { + return isset($this->headerNames[strtolower($header)]); + } + + public function getHeader($header) + { + $header = strtolower($header); + + if (!isset($this->headerNames[$header])) { + return []; + } + + $header = $this->headerNames[$header]; + + return $this->headers[$header]; + } + + public function getHeaderLine($header) + { + return implode(', ', $this->getHeader($header)); + } + + public function withHeader($header, $value) + { + $this->assertHeader($header); + $value = $this->normalizeHeaderValue($value); + $normalized = strtolower($header); + + $new = clone $this; + if (isset($new->headerNames[$normalized])) { + unset($new->headers[$new->headerNames[$normalized]]); + } + $new->headerNames[$normalized] = $header; + $new->headers[$header] = $value; + + return $new; + } + + public function withAddedHeader($header, $value) + { + $this->assertHeader($header); + $value = $this->normalizeHeaderValue($value); + $normalized = strtolower($header); + + $new = clone $this; + if (isset($new->headerNames[$normalized])) { + $header = $this->headerNames[$normalized]; + $new->headers[$header] = array_merge($this->headers[$header], $value); + } else { + $new->headerNames[$normalized] = $header; + $new->headers[$header] = $value; + } + + return $new; + } + + public function withoutHeader($header) + { + $normalized = strtolower($header); + + if (!isset($this->headerNames[$normalized])) { + return $this; + } + + $header = $this->headerNames[$normalized]; + + $new = clone $this; + unset($new->headers[$header], $new->headerNames[$normalized]); + + return $new; + } + + public function getBody() + { + if (!$this->stream) { + $this->stream = stream_for(''); + } + + return $this->stream; + } + + public function withBody(StreamInterface $body) + { + if ($body === $this->stream) { + return $this; + } + + $new = clone $this; + $new->stream = $body; + return $new; + } + + private function setHeaders(array $headers) + { + $this->headerNames = $this->headers = []; + foreach ($headers as $header => $value) { + if (is_int($header)) { + // Numeric array keys are converted to int by PHP but having a header name '123' is not forbidden by the spec + // and also allowed in withHeader(). So we need to cast it to string again for the following assertion to pass. + $header = (string) $header; + } + $this->assertHeader($header); + $value = $this->normalizeHeaderValue($value); + $normalized = strtolower($header); + if (isset($this->headerNames[$normalized])) { + $header = $this->headerNames[$normalized]; + $this->headers[$header] = array_merge($this->headers[$header], $value); + } else { + $this->headerNames[$normalized] = $header; + $this->headers[$header] = $value; + } + } + } + + private function normalizeHeaderValue($value) + { + if (!is_array($value)) { + return $this->trimHeaderValues([$value]); + } + + if (count($value) === 0) { + throw new \InvalidArgumentException('Header value can not be an empty array.'); + } + + return $this->trimHeaderValues($value); + } + + /** + * Trims whitespace from the header values. + * + * Spaces and tabs ought to be excluded by parsers when extracting the field value from a header field. + * + * header-field = field-name ":" OWS field-value OWS + * OWS = *( SP / HTAB ) + * + * @param string[] $values Header values + * + * @return string[] Trimmed header values + * + * @see https://tools.ietf.org/html/rfc7230#section-3.2.4 + */ + private function trimHeaderValues(array $values) + { + return array_map(function ($value) { + if (!is_scalar($value) && null !== $value) { + throw new \InvalidArgumentException(sprintf( + 'Header value must be scalar or null but %s provided.', + is_object($value) ? get_class($value) : gettype($value) + )); + } + + return trim((string) $value, " \t"); + }, $values); + } + + private function assertHeader($header) + { + if (!is_string($header)) { + throw new \InvalidArgumentException(sprintf( + 'Header name must be a string but %s provided.', + is_object($header) ? get_class($header) : gettype($header) + )); + } + + if ($header === '') { + throw new \InvalidArgumentException('Header name can not be empty.'); + } + } +} diff --git a/vendor/guzzlehttp/psr7/src/MultipartStream.php b/vendor/guzzlehttp/psr7/src/MultipartStream.php new file mode 100644 index 00000000..8f44df1c --- /dev/null +++ b/vendor/guzzlehttp/psr7/src/MultipartStream.php @@ -0,0 +1,153 @@ +boundary = $boundary ?: sha1(uniqid('', true)); + $this->stream = $this->createStream($elements); + } + + /** + * Get the boundary + * + * @return string + */ + public function getBoundary() + { + return $this->boundary; + } + + public function isWritable() + { + return false; + } + + /** + * Get the headers needed before transferring the content of a POST file + */ + private function getHeaders(array $headers) + { + $str = ''; + foreach ($headers as $key => $value) { + $str .= "{$key}: {$value}\r\n"; + } + + return "--{$this->boundary}\r\n" . trim($str) . "\r\n\r\n"; + } + + /** + * Create the aggregate stream that will be used to upload the POST data + */ + protected function createStream(array $elements) + { + $stream = new AppendStream(); + + foreach ($elements as $element) { + $this->addElement($stream, $element); + } + + // Add the trailing boundary with CRLF + $stream->addStream(stream_for("--{$this->boundary}--\r\n")); + + return $stream; + } + + private function addElement(AppendStream $stream, array $element) + { + foreach (['contents', 'name'] as $key) { + if (!array_key_exists($key, $element)) { + throw new \InvalidArgumentException("A '{$key}' key is required"); + } + } + + $element['contents'] = stream_for($element['contents']); + + if (empty($element['filename'])) { + $uri = $element['contents']->getMetadata('uri'); + if (substr($uri, 0, 6) !== 'php://') { + $element['filename'] = $uri; + } + } + + list($body, $headers) = $this->createElement( + $element['name'], + $element['contents'], + isset($element['filename']) ? $element['filename'] : null, + isset($element['headers']) ? $element['headers'] : [] + ); + + $stream->addStream(stream_for($this->getHeaders($headers))); + $stream->addStream($body); + $stream->addStream(stream_for("\r\n")); + } + + /** + * @return array + */ + private function createElement($name, StreamInterface $stream, $filename, array $headers) + { + // Set a default content-disposition header if one was no provided + $disposition = $this->getHeader($headers, 'content-disposition'); + if (!$disposition) { + $headers['Content-Disposition'] = ($filename === '0' || $filename) + ? sprintf('form-data; name="%s"; filename="%s"', + $name, + basename($filename)) + : "form-data; name=\"{$name}\""; + } + + // Set a default content-length header if one was no provided + $length = $this->getHeader($headers, 'content-length'); + if (!$length) { + if ($length = $stream->getSize()) { + $headers['Content-Length'] = (string) $length; + } + } + + // Set a default Content-Type if one was not supplied + $type = $this->getHeader($headers, 'content-type'); + if (!$type && ($filename === '0' || $filename)) { + if ($type = mimetype_from_filename($filename)) { + $headers['Content-Type'] = $type; + } + } + + return [$stream, $headers]; + } + + private function getHeader(array $headers, $key) + { + $lowercaseHeader = strtolower($key); + foreach ($headers as $k => $v) { + if (strtolower($k) === $lowercaseHeader) { + return $v; + } + } + + return null; + } +} diff --git a/vendor/guzzlehttp/psr7/src/NoSeekStream.php b/vendor/guzzlehttp/psr7/src/NoSeekStream.php new file mode 100644 index 00000000..adfe67a6 --- /dev/null +++ b/vendor/guzzlehttp/psr7/src/NoSeekStream.php @@ -0,0 +1,22 @@ +source = $source; + $this->size = isset($options['size']) ? $options['size'] : null; + $this->metadata = isset($options['metadata']) ? $options['metadata'] : []; + $this->buffer = new BufferStream(); + } + + public function __toString() + { + try { + return copy_to_string($this); + } catch (\Exception $e) { + return ''; + } + } + + public function close() + { + $this->detach(); + } + + public function detach() + { + $this->tellPos = false; + $this->source = null; + } + + public function getSize() + { + return $this->size; + } + + public function tell() + { + return $this->tellPos; + } + + public function eof() + { + return !$this->source; + } + + public function isSeekable() + { + return false; + } + + public function rewind() + { + $this->seek(0); + } + + public function seek($offset, $whence = SEEK_SET) + { + throw new \RuntimeException('Cannot seek a PumpStream'); + } + + public function isWritable() + { + return false; + } + + public function write($string) + { + throw new \RuntimeException('Cannot write to a PumpStream'); + } + + public function isReadable() + { + return true; + } + + public function read($length) + { + $data = $this->buffer->read($length); + $readLen = strlen($data); + $this->tellPos += $readLen; + $remaining = $length - $readLen; + + if ($remaining) { + $this->pump($remaining); + $data .= $this->buffer->read($remaining); + $this->tellPos += strlen($data) - $readLen; + } + + return $data; + } + + public function getContents() + { + $result = ''; + while (!$this->eof()) { + $result .= $this->read(1000000); + } + + return $result; + } + + public function getMetadata($key = null) + { + if (!$key) { + return $this->metadata; + } + + return isset($this->metadata[$key]) ? $this->metadata[$key] : null; + } + + private function pump($length) + { + if ($this->source) { + do { + $data = call_user_func($this->source, $length); + if ($data === false || $data === null) { + $this->source = null; + return; + } + $this->buffer->write($data); + $length -= strlen($data); + } while ($length > 0); + } + } +} diff --git a/vendor/guzzlehttp/psr7/src/Request.php b/vendor/guzzlehttp/psr7/src/Request.php new file mode 100644 index 00000000..2b8e35e3 --- /dev/null +++ b/vendor/guzzlehttp/psr7/src/Request.php @@ -0,0 +1,151 @@ +assertMethod($method); + if (!($uri instanceof UriInterface)) { + $uri = new Uri($uri); + } + + $this->method = strtoupper($method); + $this->uri = $uri; + $this->setHeaders($headers); + $this->protocol = $version; + + if (!isset($this->headerNames['host'])) { + $this->updateHostFromUri(); + } + + if ($body !== '' && $body !== null) { + $this->stream = stream_for($body); + } + } + + public function getRequestTarget() + { + if ($this->requestTarget !== null) { + return $this->requestTarget; + } + + $target = $this->uri->getPath(); + if ($target == '') { + $target = '/'; + } + if ($this->uri->getQuery() != '') { + $target .= '?' . $this->uri->getQuery(); + } + + return $target; + } + + public function withRequestTarget($requestTarget) + { + if (preg_match('#\s#', $requestTarget)) { + throw new InvalidArgumentException( + 'Invalid request target provided; cannot contain whitespace' + ); + } + + $new = clone $this; + $new->requestTarget = $requestTarget; + return $new; + } + + public function getMethod() + { + return $this->method; + } + + public function withMethod($method) + { + $this->assertMethod($method); + $new = clone $this; + $new->method = strtoupper($method); + return $new; + } + + public function getUri() + { + return $this->uri; + } + + public function withUri(UriInterface $uri, $preserveHost = false) + { + if ($uri === $this->uri) { + return $this; + } + + $new = clone $this; + $new->uri = $uri; + + if (!$preserveHost || !isset($this->headerNames['host'])) { + $new->updateHostFromUri(); + } + + return $new; + } + + private function updateHostFromUri() + { + $host = $this->uri->getHost(); + + if ($host == '') { + return; + } + + if (($port = $this->uri->getPort()) !== null) { + $host .= ':' . $port; + } + + if (isset($this->headerNames['host'])) { + $header = $this->headerNames['host']; + } else { + $header = 'Host'; + $this->headerNames['host'] = 'Host'; + } + // Ensure Host is the first header. + // See: http://tools.ietf.org/html/rfc7230#section-5.4 + $this->headers = [$header => [$host]] + $this->headers; + } + + private function assertMethod($method) + { + if (!is_string($method) || $method === '') { + throw new \InvalidArgumentException('Method must be a non-empty string.'); + } + } +} diff --git a/vendor/guzzlehttp/psr7/src/Response.php b/vendor/guzzlehttp/psr7/src/Response.php new file mode 100644 index 00000000..5bde99e0 --- /dev/null +++ b/vendor/guzzlehttp/psr7/src/Response.php @@ -0,0 +1,154 @@ + 'Continue', + 101 => 'Switching Protocols', + 102 => 'Processing', + 200 => 'OK', + 201 => 'Created', + 202 => 'Accepted', + 203 => 'Non-Authoritative Information', + 204 => 'No Content', + 205 => 'Reset Content', + 206 => 'Partial Content', + 207 => 'Multi-status', + 208 => 'Already Reported', + 300 => 'Multiple Choices', + 301 => 'Moved Permanently', + 302 => 'Found', + 303 => 'See Other', + 304 => 'Not Modified', + 305 => 'Use Proxy', + 306 => 'Switch Proxy', + 307 => 'Temporary Redirect', + 400 => 'Bad Request', + 401 => 'Unauthorized', + 402 => 'Payment Required', + 403 => 'Forbidden', + 404 => 'Not Found', + 405 => 'Method Not Allowed', + 406 => 'Not Acceptable', + 407 => 'Proxy Authentication Required', + 408 => 'Request Time-out', + 409 => 'Conflict', + 410 => 'Gone', + 411 => 'Length Required', + 412 => 'Precondition Failed', + 413 => 'Request Entity Too Large', + 414 => 'Request-URI Too Large', + 415 => 'Unsupported Media Type', + 416 => 'Requested range not satisfiable', + 417 => 'Expectation Failed', + 418 => 'I\'m a teapot', + 422 => 'Unprocessable Entity', + 423 => 'Locked', + 424 => 'Failed Dependency', + 425 => 'Unordered Collection', + 426 => 'Upgrade Required', + 428 => 'Precondition Required', + 429 => 'Too Many Requests', + 431 => 'Request Header Fields Too Large', + 451 => 'Unavailable For Legal Reasons', + 500 => 'Internal Server Error', + 501 => 'Not Implemented', + 502 => 'Bad Gateway', + 503 => 'Service Unavailable', + 504 => 'Gateway Time-out', + 505 => 'HTTP Version not supported', + 506 => 'Variant Also Negotiates', + 507 => 'Insufficient Storage', + 508 => 'Loop Detected', + 511 => 'Network Authentication Required', + ]; + + /** @var string */ + private $reasonPhrase = ''; + + /** @var int */ + private $statusCode = 200; + + /** + * @param int $status Status code + * @param array $headers Response headers + * @param string|null|resource|StreamInterface $body Response body + * @param string $version Protocol version + * @param string|null $reason Reason phrase (when empty a default will be used based on the status code) + */ + public function __construct( + $status = 200, + array $headers = [], + $body = null, + $version = '1.1', + $reason = null + ) { + $this->assertStatusCodeIsInteger($status); + $status = (int) $status; + $this->assertStatusCodeRange($status); + + $this->statusCode = $status; + + if ($body !== '' && $body !== null) { + $this->stream = stream_for($body); + } + + $this->setHeaders($headers); + if ($reason == '' && isset(self::$phrases[$this->statusCode])) { + $this->reasonPhrase = self::$phrases[$this->statusCode]; + } else { + $this->reasonPhrase = (string) $reason; + } + + $this->protocol = $version; + } + + public function getStatusCode() + { + return $this->statusCode; + } + + public function getReasonPhrase() + { + return $this->reasonPhrase; + } + + public function withStatus($code, $reasonPhrase = '') + { + $this->assertStatusCodeIsInteger($code); + $code = (int) $code; + $this->assertStatusCodeRange($code); + + $new = clone $this; + $new->statusCode = $code; + if ($reasonPhrase == '' && isset(self::$phrases[$new->statusCode])) { + $reasonPhrase = self::$phrases[$new->statusCode]; + } + $new->reasonPhrase = $reasonPhrase; + return $new; + } + + private function assertStatusCodeIsInteger($statusCode) + { + if (filter_var($statusCode, FILTER_VALIDATE_INT) === false) { + throw new \InvalidArgumentException('Status code must be an integer value.'); + } + } + + private function assertStatusCodeRange($statusCode) + { + if ($statusCode < 100 || $statusCode >= 600) { + throw new \InvalidArgumentException('Status code must be an integer value between 1xx and 5xx.'); + } + } +} diff --git a/vendor/guzzlehttp/psr7/src/Rfc7230.php b/vendor/guzzlehttp/psr7/src/Rfc7230.php new file mode 100644 index 00000000..2f37e229 --- /dev/null +++ b/vendor/guzzlehttp/psr7/src/Rfc7230.php @@ -0,0 +1,18 @@ +@,;:\\\"/[\]?={}\x01-\x20\x7F]++):[ \t]*+((?:[ \t]*+[\x21-\x7E\x80-\xFF]++)*+)[ \t]*+\r?\n)m"; + const HEADER_FOLD_REGEX = "(\r?\n[ \t]++)"; +} diff --git a/vendor/guzzlehttp/psr7/src/ServerRequest.php b/vendor/guzzlehttp/psr7/src/ServerRequest.php new file mode 100644 index 00000000..2c4e7698 --- /dev/null +++ b/vendor/guzzlehttp/psr7/src/ServerRequest.php @@ -0,0 +1,376 @@ +serverParams = $serverParams; + + parent::__construct($method, $uri, $headers, $body, $version); + } + + /** + * Return an UploadedFile instance array. + * + * @param array $files A array which respect $_FILES structure + * @throws InvalidArgumentException for unrecognized values + * @return array + */ + public static function normalizeFiles(array $files) + { + $normalized = []; + + foreach ($files as $key => $value) { + if ($value instanceof UploadedFileInterface) { + $normalized[$key] = $value; + } elseif (is_array($value) && isset($value['tmp_name'])) { + $normalized[$key] = self::createUploadedFileFromSpec($value); + } elseif (is_array($value)) { + $normalized[$key] = self::normalizeFiles($value); + continue; + } else { + throw new InvalidArgumentException('Invalid value in files specification'); + } + } + + return $normalized; + } + + /** + * Create and return an UploadedFile instance from a $_FILES specification. + * + * If the specification represents an array of values, this method will + * delegate to normalizeNestedFileSpec() and return that return value. + * + * @param array $value $_FILES struct + * @return array|UploadedFileInterface + */ + private static function createUploadedFileFromSpec(array $value) + { + if (is_array($value['tmp_name'])) { + return self::normalizeNestedFileSpec($value); + } + + return new UploadedFile( + $value['tmp_name'], + (int) $value['size'], + (int) $value['error'], + $value['name'], + $value['type'] + ); + } + + /** + * Normalize an array of file specifications. + * + * Loops through all nested files and returns a normalized array of + * UploadedFileInterface instances. + * + * @param array $files + * @return UploadedFileInterface[] + */ + private static function normalizeNestedFileSpec(array $files = []) + { + $normalizedFiles = []; + + foreach (array_keys($files['tmp_name']) as $key) { + $spec = [ + 'tmp_name' => $files['tmp_name'][$key], + 'size' => $files['size'][$key], + 'error' => $files['error'][$key], + 'name' => $files['name'][$key], + 'type' => $files['type'][$key], + ]; + $normalizedFiles[$key] = self::createUploadedFileFromSpec($spec); + } + + return $normalizedFiles; + } + + /** + * Return a ServerRequest populated with superglobals: + * $_GET + * $_POST + * $_COOKIE + * $_FILES + * $_SERVER + * + * @return ServerRequestInterface + */ + public static function fromGlobals() + { + $method = isset($_SERVER['REQUEST_METHOD']) ? $_SERVER['REQUEST_METHOD'] : 'GET'; + $headers = getallheaders(); + $uri = self::getUriFromGlobals(); + $body = new CachingStream(new LazyOpenStream('php://input', 'r+')); + $protocol = isset($_SERVER['SERVER_PROTOCOL']) ? str_replace('HTTP/', '', $_SERVER['SERVER_PROTOCOL']) : '1.1'; + + $serverRequest = new ServerRequest($method, $uri, $headers, $body, $protocol, $_SERVER); + + return $serverRequest + ->withCookieParams($_COOKIE) + ->withQueryParams($_GET) + ->withParsedBody($_POST) + ->withUploadedFiles(self::normalizeFiles($_FILES)); + } + + private static function extractHostAndPortFromAuthority($authority) + { + $uri = 'http://'.$authority; + $parts = parse_url($uri); + if (false === $parts) { + return [null, null]; + } + + $host = isset($parts['host']) ? $parts['host'] : null; + $port = isset($parts['port']) ? $parts['port'] : null; + + return [$host, $port]; + } + + /** + * Get a Uri populated with values from $_SERVER. + * + * @return UriInterface + */ + public static function getUriFromGlobals() + { + $uri = new Uri(''); + + $uri = $uri->withScheme(!empty($_SERVER['HTTPS']) && $_SERVER['HTTPS'] !== 'off' ? 'https' : 'http'); + + $hasPort = false; + if (isset($_SERVER['HTTP_HOST'])) { + list($host, $port) = self::extractHostAndPortFromAuthority($_SERVER['HTTP_HOST']); + if ($host !== null) { + $uri = $uri->withHost($host); + } + + if ($port !== null) { + $hasPort = true; + $uri = $uri->withPort($port); + } + } elseif (isset($_SERVER['SERVER_NAME'])) { + $uri = $uri->withHost($_SERVER['SERVER_NAME']); + } elseif (isset($_SERVER['SERVER_ADDR'])) { + $uri = $uri->withHost($_SERVER['SERVER_ADDR']); + } + + if (!$hasPort && isset($_SERVER['SERVER_PORT'])) { + $uri = $uri->withPort($_SERVER['SERVER_PORT']); + } + + $hasQuery = false; + if (isset($_SERVER['REQUEST_URI'])) { + $requestUriParts = explode('?', $_SERVER['REQUEST_URI'], 2); + $uri = $uri->withPath($requestUriParts[0]); + if (isset($requestUriParts[1])) { + $hasQuery = true; + $uri = $uri->withQuery($requestUriParts[1]); + } + } + + if (!$hasQuery && isset($_SERVER['QUERY_STRING'])) { + $uri = $uri->withQuery($_SERVER['QUERY_STRING']); + } + + return $uri; + } + + + /** + * {@inheritdoc} + */ + public function getServerParams() + { + return $this->serverParams; + } + + /** + * {@inheritdoc} + */ + public function getUploadedFiles() + { + return $this->uploadedFiles; + } + + /** + * {@inheritdoc} + */ + public function withUploadedFiles(array $uploadedFiles) + { + $new = clone $this; + $new->uploadedFiles = $uploadedFiles; + + return $new; + } + + /** + * {@inheritdoc} + */ + public function getCookieParams() + { + return $this->cookieParams; + } + + /** + * {@inheritdoc} + */ + public function withCookieParams(array $cookies) + { + $new = clone $this; + $new->cookieParams = $cookies; + + return $new; + } + + /** + * {@inheritdoc} + */ + public function getQueryParams() + { + return $this->queryParams; + } + + /** + * {@inheritdoc} + */ + public function withQueryParams(array $query) + { + $new = clone $this; + $new->queryParams = $query; + + return $new; + } + + /** + * {@inheritdoc} + */ + public function getParsedBody() + { + return $this->parsedBody; + } + + /** + * {@inheritdoc} + */ + public function withParsedBody($data) + { + $new = clone $this; + $new->parsedBody = $data; + + return $new; + } + + /** + * {@inheritdoc} + */ + public function getAttributes() + { + return $this->attributes; + } + + /** + * {@inheritdoc} + */ + public function getAttribute($attribute, $default = null) + { + if (false === array_key_exists($attribute, $this->attributes)) { + return $default; + } + + return $this->attributes[$attribute]; + } + + /** + * {@inheritdoc} + */ + public function withAttribute($attribute, $value) + { + $new = clone $this; + $new->attributes[$attribute] = $value; + + return $new; + } + + /** + * {@inheritdoc} + */ + public function withoutAttribute($attribute) + { + if (false === array_key_exists($attribute, $this->attributes)) { + return $this; + } + + $new = clone $this; + unset($new->attributes[$attribute]); + + return $new; + } +} diff --git a/vendor/guzzlehttp/psr7/src/Stream.php b/vendor/guzzlehttp/psr7/src/Stream.php new file mode 100644 index 00000000..1a498ee5 --- /dev/null +++ b/vendor/guzzlehttp/psr7/src/Stream.php @@ -0,0 +1,267 @@ +size = $options['size']; + } + + $this->customMetadata = isset($options['metadata']) + ? $options['metadata'] + : []; + + $this->stream = $stream; + $meta = stream_get_meta_data($this->stream); + $this->seekable = $meta['seekable']; + $this->readable = (bool)preg_match(self::READABLE_MODES, $meta['mode']); + $this->writable = (bool)preg_match(self::WRITABLE_MODES, $meta['mode']); + $this->uri = $this->getMetadata('uri'); + } + + /** + * Closes the stream when the destructed + */ + public function __destruct() + { + $this->close(); + } + + public function __toString() + { + try { + $this->seek(0); + return (string) stream_get_contents($this->stream); + } catch (\Exception $e) { + return ''; + } + } + + public function getContents() + { + if (!isset($this->stream)) { + throw new \RuntimeException('Stream is detached'); + } + + $contents = stream_get_contents($this->stream); + + if ($contents === false) { + throw new \RuntimeException('Unable to read stream contents'); + } + + return $contents; + } + + public function close() + { + if (isset($this->stream)) { + if (is_resource($this->stream)) { + fclose($this->stream); + } + $this->detach(); + } + } + + public function detach() + { + if (!isset($this->stream)) { + return null; + } + + $result = $this->stream; + unset($this->stream); + $this->size = $this->uri = null; + $this->readable = $this->writable = $this->seekable = false; + + return $result; + } + + public function getSize() + { + if ($this->size !== null) { + return $this->size; + } + + if (!isset($this->stream)) { + return null; + } + + // Clear the stat cache if the stream has a URI + if ($this->uri) { + clearstatcache(true, $this->uri); + } + + $stats = fstat($this->stream); + if (isset($stats['size'])) { + $this->size = $stats['size']; + return $this->size; + } + + return null; + } + + public function isReadable() + { + return $this->readable; + } + + public function isWritable() + { + return $this->writable; + } + + public function isSeekable() + { + return $this->seekable; + } + + public function eof() + { + if (!isset($this->stream)) { + throw new \RuntimeException('Stream is detached'); + } + + return feof($this->stream); + } + + public function tell() + { + if (!isset($this->stream)) { + throw new \RuntimeException('Stream is detached'); + } + + $result = ftell($this->stream); + + if ($result === false) { + throw new \RuntimeException('Unable to determine stream position'); + } + + return $result; + } + + public function rewind() + { + $this->seek(0); + } + + public function seek($offset, $whence = SEEK_SET) + { + $whence = (int) $whence; + + if (!isset($this->stream)) { + throw new \RuntimeException('Stream is detached'); + } + if (!$this->seekable) { + throw new \RuntimeException('Stream is not seekable'); + } + if (fseek($this->stream, $offset, $whence) === -1) { + throw new \RuntimeException('Unable to seek to stream position ' + . $offset . ' with whence ' . var_export($whence, true)); + } + } + + public function read($length) + { + if (!isset($this->stream)) { + throw new \RuntimeException('Stream is detached'); + } + if (!$this->readable) { + throw new \RuntimeException('Cannot read from non-readable stream'); + } + if ($length < 0) { + throw new \RuntimeException('Length parameter cannot be negative'); + } + + if (0 === $length) { + return ''; + } + + $string = fread($this->stream, $length); + if (false === $string) { + throw new \RuntimeException('Unable to read from stream'); + } + + return $string; + } + + public function write($string) + { + if (!isset($this->stream)) { + throw new \RuntimeException('Stream is detached'); + } + if (!$this->writable) { + throw new \RuntimeException('Cannot write to a non-writable stream'); + } + + // We can't know the size after writing anything + $this->size = null; + $result = fwrite($this->stream, $string); + + if ($result === false) { + throw new \RuntimeException('Unable to write to stream'); + } + + return $result; + } + + public function getMetadata($key = null) + { + if (!isset($this->stream)) { + return $key ? null : []; + } elseif (!$key) { + return $this->customMetadata + stream_get_meta_data($this->stream); + } elseif (isset($this->customMetadata[$key])) { + return $this->customMetadata[$key]; + } + + $meta = stream_get_meta_data($this->stream); + + return isset($meta[$key]) ? $meta[$key] : null; + } +} diff --git a/vendor/guzzlehttp/psr7/src/StreamDecoratorTrait.php b/vendor/guzzlehttp/psr7/src/StreamDecoratorTrait.php new file mode 100644 index 00000000..4a15fdf8 --- /dev/null +++ b/vendor/guzzlehttp/psr7/src/StreamDecoratorTrait.php @@ -0,0 +1,149 @@ +stream = $stream; + } + + /** + * Magic method used to create a new stream if streams are not added in + * the constructor of a decorator (e.g., LazyOpenStream). + * + * @param string $name Name of the property (allows "stream" only). + * + * @return StreamInterface + */ + public function __get($name) + { + if ($name == 'stream') { + $this->stream = $this->createStream(); + return $this->stream; + } + + throw new \UnexpectedValueException("$name not found on class"); + } + + public function __toString() + { + try { + if ($this->isSeekable()) { + $this->seek(0); + } + return $this->getContents(); + } catch (\Exception $e) { + // Really, PHP? https://bugs.php.net/bug.php?id=53648 + trigger_error('StreamDecorator::__toString exception: ' + . (string) $e, E_USER_ERROR); + return ''; + } + } + + public function getContents() + { + return copy_to_string($this); + } + + /** + * Allow decorators to implement custom methods + * + * @param string $method Missing method name + * @param array $args Method arguments + * + * @return mixed + */ + public function __call($method, array $args) + { + $result = call_user_func_array([$this->stream, $method], $args); + + // Always return the wrapped object if the result is a return $this + return $result === $this->stream ? $this : $result; + } + + public function close() + { + $this->stream->close(); + } + + public function getMetadata($key = null) + { + return $this->stream->getMetadata($key); + } + + public function detach() + { + return $this->stream->detach(); + } + + public function getSize() + { + return $this->stream->getSize(); + } + + public function eof() + { + return $this->stream->eof(); + } + + public function tell() + { + return $this->stream->tell(); + } + + public function isReadable() + { + return $this->stream->isReadable(); + } + + public function isWritable() + { + return $this->stream->isWritable(); + } + + public function isSeekable() + { + return $this->stream->isSeekable(); + } + + public function rewind() + { + $this->seek(0); + } + + public function seek($offset, $whence = SEEK_SET) + { + $this->stream->seek($offset, $whence); + } + + public function read($length) + { + return $this->stream->read($length); + } + + public function write($string) + { + return $this->stream->write($string); + } + + /** + * Implement in subclasses to dynamically create streams when requested. + * + * @return StreamInterface + * @throws \BadMethodCallException + */ + protected function createStream() + { + throw new \BadMethodCallException('Not implemented'); + } +} diff --git a/vendor/guzzlehttp/psr7/src/StreamWrapper.php b/vendor/guzzlehttp/psr7/src/StreamWrapper.php new file mode 100644 index 00000000..95d8fbd3 --- /dev/null +++ b/vendor/guzzlehttp/psr7/src/StreamWrapper.php @@ -0,0 +1,161 @@ +isReadable()) { + $mode = $stream->isWritable() ? 'r+' : 'r'; + } elseif ($stream->isWritable()) { + $mode = 'w'; + } else { + throw new \InvalidArgumentException('The stream must be readable, ' + . 'writable, or both.'); + } + + return fopen('guzzle://stream', $mode, null, self::createStreamContext($stream)); + } + + /** + * Creates a stream context that can be used to open a stream as a php stream resource. + * + * @param StreamInterface $stream + * + * @return resource + */ + public static function createStreamContext(StreamInterface $stream) + { + return stream_context_create([ + 'guzzle' => ['stream' => $stream] + ]); + } + + /** + * Registers the stream wrapper if needed + */ + public static function register() + { + if (!in_array('guzzle', stream_get_wrappers())) { + stream_wrapper_register('guzzle', __CLASS__); + } + } + + public function stream_open($path, $mode, $options, &$opened_path) + { + $options = stream_context_get_options($this->context); + + if (!isset($options['guzzle']['stream'])) { + return false; + } + + $this->mode = $mode; + $this->stream = $options['guzzle']['stream']; + + return true; + } + + public function stream_read($count) + { + return $this->stream->read($count); + } + + public function stream_write($data) + { + return (int) $this->stream->write($data); + } + + public function stream_tell() + { + return $this->stream->tell(); + } + + public function stream_eof() + { + return $this->stream->eof(); + } + + public function stream_seek($offset, $whence) + { + $this->stream->seek($offset, $whence); + + return true; + } + + public function stream_cast($cast_as) + { + $stream = clone($this->stream); + + return $stream->detach(); + } + + public function stream_stat() + { + static $modeMap = [ + 'r' => 33060, + 'rb' => 33060, + 'r+' => 33206, + 'w' => 33188, + 'wb' => 33188 + ]; + + return [ + 'dev' => 0, + 'ino' => 0, + 'mode' => $modeMap[$this->mode], + 'nlink' => 0, + 'uid' => 0, + 'gid' => 0, + 'rdev' => 0, + 'size' => $this->stream->getSize() ?: 0, + 'atime' => 0, + 'mtime' => 0, + 'ctime' => 0, + 'blksize' => 0, + 'blocks' => 0 + ]; + } + + public function url_stat($path, $flags) + { + return [ + 'dev' => 0, + 'ino' => 0, + 'mode' => 0, + 'nlink' => 0, + 'uid' => 0, + 'gid' => 0, + 'rdev' => 0, + 'size' => 0, + 'atime' => 0, + 'mtime' => 0, + 'ctime' => 0, + 'blksize' => 0, + 'blocks' => 0 + ]; + } +} diff --git a/vendor/guzzlehttp/psr7/src/UploadedFile.php b/vendor/guzzlehttp/psr7/src/UploadedFile.php new file mode 100644 index 00000000..556e9257 --- /dev/null +++ b/vendor/guzzlehttp/psr7/src/UploadedFile.php @@ -0,0 +1,316 @@ +setError($errorStatus); + $this->setSize($size); + $this->setClientFilename($clientFilename); + $this->setClientMediaType($clientMediaType); + + if ($this->isOk()) { + $this->setStreamOrFile($streamOrFile); + } + } + + /** + * Depending on the value set file or stream variable + * + * @param mixed $streamOrFile + * @throws InvalidArgumentException + */ + private function setStreamOrFile($streamOrFile) + { + if (is_string($streamOrFile)) { + $this->file = $streamOrFile; + } elseif (is_resource($streamOrFile)) { + $this->stream = new Stream($streamOrFile); + } elseif ($streamOrFile instanceof StreamInterface) { + $this->stream = $streamOrFile; + } else { + throw new InvalidArgumentException( + 'Invalid stream or file provided for UploadedFile' + ); + } + } + + /** + * @param int $error + * @throws InvalidArgumentException + */ + private function setError($error) + { + if (false === is_int($error)) { + throw new InvalidArgumentException( + 'Upload file error status must be an integer' + ); + } + + if (false === in_array($error, UploadedFile::$errors)) { + throw new InvalidArgumentException( + 'Invalid error status for UploadedFile' + ); + } + + $this->error = $error; + } + + /** + * @param int $size + * @throws InvalidArgumentException + */ + private function setSize($size) + { + if (false === is_int($size)) { + throw new InvalidArgumentException( + 'Upload file size must be an integer' + ); + } + + $this->size = $size; + } + + /** + * @param mixed $param + * @return boolean + */ + private function isStringOrNull($param) + { + return in_array(gettype($param), ['string', 'NULL']); + } + + /** + * @param mixed $param + * @return boolean + */ + private function isStringNotEmpty($param) + { + return is_string($param) && false === empty($param); + } + + /** + * @param string|null $clientFilename + * @throws InvalidArgumentException + */ + private function setClientFilename($clientFilename) + { + if (false === $this->isStringOrNull($clientFilename)) { + throw new InvalidArgumentException( + 'Upload file client filename must be a string or null' + ); + } + + $this->clientFilename = $clientFilename; + } + + /** + * @param string|null $clientMediaType + * @throws InvalidArgumentException + */ + private function setClientMediaType($clientMediaType) + { + if (false === $this->isStringOrNull($clientMediaType)) { + throw new InvalidArgumentException( + 'Upload file client media type must be a string or null' + ); + } + + $this->clientMediaType = $clientMediaType; + } + + /** + * Return true if there is no upload error + * + * @return boolean + */ + private function isOk() + { + return $this->error === UPLOAD_ERR_OK; + } + + /** + * @return boolean + */ + public function isMoved() + { + return $this->moved; + } + + /** + * @throws RuntimeException if is moved or not ok + */ + private function validateActive() + { + if (false === $this->isOk()) { + throw new RuntimeException('Cannot retrieve stream due to upload error'); + } + + if ($this->isMoved()) { + throw new RuntimeException('Cannot retrieve stream after it has already been moved'); + } + } + + /** + * {@inheritdoc} + * @throws RuntimeException if the upload was not successful. + */ + public function getStream() + { + $this->validateActive(); + + if ($this->stream instanceof StreamInterface) { + return $this->stream; + } + + return new LazyOpenStream($this->file, 'r+'); + } + + /** + * {@inheritdoc} + * + * @see http://php.net/is_uploaded_file + * @see http://php.net/move_uploaded_file + * @param string $targetPath Path to which to move the uploaded file. + * @throws RuntimeException if the upload was not successful. + * @throws InvalidArgumentException if the $path specified is invalid. + * @throws RuntimeException on any error during the move operation, or on + * the second or subsequent call to the method. + */ + public function moveTo($targetPath) + { + $this->validateActive(); + + if (false === $this->isStringNotEmpty($targetPath)) { + throw new InvalidArgumentException( + 'Invalid path provided for move operation; must be a non-empty string' + ); + } + + if ($this->file) { + $this->moved = php_sapi_name() == 'cli' + ? rename($this->file, $targetPath) + : move_uploaded_file($this->file, $targetPath); + } else { + copy_to_stream( + $this->getStream(), + new LazyOpenStream($targetPath, 'w') + ); + + $this->moved = true; + } + + if (false === $this->moved) { + throw new RuntimeException( + sprintf('Uploaded file could not be moved to %s', $targetPath) + ); + } + } + + /** + * {@inheritdoc} + * + * @return int|null The file size in bytes or null if unknown. + */ + public function getSize() + { + return $this->size; + } + + /** + * {@inheritdoc} + * + * @see http://php.net/manual/en/features.file-upload.errors.php + * @return int One of PHP's UPLOAD_ERR_XXX constants. + */ + public function getError() + { + return $this->error; + } + + /** + * {@inheritdoc} + * + * @return string|null The filename sent by the client or null if none + * was provided. + */ + public function getClientFilename() + { + return $this->clientFilename; + } + + /** + * {@inheritdoc} + */ + public function getClientMediaType() + { + return $this->clientMediaType; + } +} diff --git a/vendor/guzzlehttp/psr7/src/Uri.php b/vendor/guzzlehttp/psr7/src/Uri.php new file mode 100644 index 00000000..469bb673 --- /dev/null +++ b/vendor/guzzlehttp/psr7/src/Uri.php @@ -0,0 +1,760 @@ + 80, + 'https' => 443, + 'ftp' => 21, + 'gopher' => 70, + 'nntp' => 119, + 'news' => 119, + 'telnet' => 23, + 'tn3270' => 23, + 'imap' => 143, + 'pop' => 110, + 'ldap' => 389, + ]; + + private static $charUnreserved = 'a-zA-Z0-9_\-\.~'; + private static $charSubDelims = '!\$&\'\(\)\*\+,;='; + private static $replaceQuery = ['=' => '%3D', '&' => '%26']; + + /** @var string Uri scheme. */ + private $scheme = ''; + + /** @var string Uri user info. */ + private $userInfo = ''; + + /** @var string Uri host. */ + private $host = ''; + + /** @var int|null Uri port. */ + private $port; + + /** @var string Uri path. */ + private $path = ''; + + /** @var string Uri query string. */ + private $query = ''; + + /** @var string Uri fragment. */ + private $fragment = ''; + + /** + * @param string $uri URI to parse + */ + public function __construct($uri = '') + { + // weak type check to also accept null until we can add scalar type hints + if ($uri != '') { + $parts = parse_url($uri); + if ($parts === false) { + throw new \InvalidArgumentException("Unable to parse URI: $uri"); + } + $this->applyParts($parts); + } + } + + public function __toString() + { + return self::composeComponents( + $this->scheme, + $this->getAuthority(), + $this->path, + $this->query, + $this->fragment + ); + } + + /** + * Composes a URI reference string from its various components. + * + * Usually this method does not need to be called manually but instead is used indirectly via + * `Psr\Http\Message\UriInterface::__toString`. + * + * PSR-7 UriInterface treats an empty component the same as a missing component as + * getQuery(), getFragment() etc. always return a string. This explains the slight + * difference to RFC 3986 Section 5.3. + * + * Another adjustment is that the authority separator is added even when the authority is missing/empty + * for the "file" scheme. This is because PHP stream functions like `file_get_contents` only work with + * `file:///myfile` but not with `file:/myfile` although they are equivalent according to RFC 3986. But + * `file:///` is the more common syntax for the file scheme anyway (Chrome for example redirects to + * that format). + * + * @param string $scheme + * @param string $authority + * @param string $path + * @param string $query + * @param string $fragment + * + * @return string + * + * @link https://tools.ietf.org/html/rfc3986#section-5.3 + */ + public static function composeComponents($scheme, $authority, $path, $query, $fragment) + { + $uri = ''; + + // weak type checks to also accept null until we can add scalar type hints + if ($scheme != '') { + $uri .= $scheme . ':'; + } + + if ($authority != ''|| $scheme === 'file') { + $uri .= '//' . $authority; + } + + $uri .= $path; + + if ($query != '') { + $uri .= '?' . $query; + } + + if ($fragment != '') { + $uri .= '#' . $fragment; + } + + return $uri; + } + + /** + * Whether the URI has the default port of the current scheme. + * + * `Psr\Http\Message\UriInterface::getPort` may return null or the standard port. This method can be used + * independently of the implementation. + * + * @param UriInterface $uri + * + * @return bool + */ + public static function isDefaultPort(UriInterface $uri) + { + return $uri->getPort() === null + || (isset(self::$defaultPorts[$uri->getScheme()]) && $uri->getPort() === self::$defaultPorts[$uri->getScheme()]); + } + + /** + * Whether the URI is absolute, i.e. it has a scheme. + * + * An instance of UriInterface can either be an absolute URI or a relative reference. This method returns true + * if it is the former. An absolute URI has a scheme. A relative reference is used to express a URI relative + * to another URI, the base URI. Relative references can be divided into several forms: + * - network-path references, e.g. '//example.com/path' + * - absolute-path references, e.g. '/path' + * - relative-path references, e.g. 'subpath' + * + * @param UriInterface $uri + * + * @return bool + * @see Uri::isNetworkPathReference + * @see Uri::isAbsolutePathReference + * @see Uri::isRelativePathReference + * @link https://tools.ietf.org/html/rfc3986#section-4 + */ + public static function isAbsolute(UriInterface $uri) + { + return $uri->getScheme() !== ''; + } + + /** + * Whether the URI is a network-path reference. + * + * A relative reference that begins with two slash characters is termed an network-path reference. + * + * @param UriInterface $uri + * + * @return bool + * @link https://tools.ietf.org/html/rfc3986#section-4.2 + */ + public static function isNetworkPathReference(UriInterface $uri) + { + return $uri->getScheme() === '' && $uri->getAuthority() !== ''; + } + + /** + * Whether the URI is a absolute-path reference. + * + * A relative reference that begins with a single slash character is termed an absolute-path reference. + * + * @param UriInterface $uri + * + * @return bool + * @link https://tools.ietf.org/html/rfc3986#section-4.2 + */ + public static function isAbsolutePathReference(UriInterface $uri) + { + return $uri->getScheme() === '' + && $uri->getAuthority() === '' + && isset($uri->getPath()[0]) + && $uri->getPath()[0] === '/'; + } + + /** + * Whether the URI is a relative-path reference. + * + * A relative reference that does not begin with a slash character is termed a relative-path reference. + * + * @param UriInterface $uri + * + * @return bool + * @link https://tools.ietf.org/html/rfc3986#section-4.2 + */ + public static function isRelativePathReference(UriInterface $uri) + { + return $uri->getScheme() === '' + && $uri->getAuthority() === '' + && (!isset($uri->getPath()[0]) || $uri->getPath()[0] !== '/'); + } + + /** + * Whether the URI is a same-document reference. + * + * A same-document reference refers to a URI that is, aside from its fragment + * component, identical to the base URI. When no base URI is given, only an empty + * URI reference (apart from its fragment) is considered a same-document reference. + * + * @param UriInterface $uri The URI to check + * @param UriInterface|null $base An optional base URI to compare against + * + * @return bool + * @link https://tools.ietf.org/html/rfc3986#section-4.4 + */ + public static function isSameDocumentReference(UriInterface $uri, UriInterface $base = null) + { + if ($base !== null) { + $uri = UriResolver::resolve($base, $uri); + + return ($uri->getScheme() === $base->getScheme()) + && ($uri->getAuthority() === $base->getAuthority()) + && ($uri->getPath() === $base->getPath()) + && ($uri->getQuery() === $base->getQuery()); + } + + return $uri->getScheme() === '' && $uri->getAuthority() === '' && $uri->getPath() === '' && $uri->getQuery() === ''; + } + + /** + * Removes dot segments from a path and returns the new path. + * + * @param string $path + * + * @return string + * + * @deprecated since version 1.4. Use UriResolver::removeDotSegments instead. + * @see UriResolver::removeDotSegments + */ + public static function removeDotSegments($path) + { + return UriResolver::removeDotSegments($path); + } + + /** + * Converts the relative URI into a new URI that is resolved against the base URI. + * + * @param UriInterface $base Base URI + * @param string|UriInterface $rel Relative URI + * + * @return UriInterface + * + * @deprecated since version 1.4. Use UriResolver::resolve instead. + * @see UriResolver::resolve + */ + public static function resolve(UriInterface $base, $rel) + { + if (!($rel instanceof UriInterface)) { + $rel = new self($rel); + } + + return UriResolver::resolve($base, $rel); + } + + /** + * Creates a new URI with a specific query string value removed. + * + * Any existing query string values that exactly match the provided key are + * removed. + * + * @param UriInterface $uri URI to use as a base. + * @param string $key Query string key to remove. + * + * @return UriInterface + */ + public static function withoutQueryValue(UriInterface $uri, $key) + { + $result = self::getFilteredQueryString($uri, [$key]); + + return $uri->withQuery(implode('&', $result)); + } + + /** + * Creates a new URI with a specific query string value. + * + * Any existing query string values that exactly match the provided key are + * removed and replaced with the given key value pair. + * + * A value of null will set the query string key without a value, e.g. "key" + * instead of "key=value". + * + * @param UriInterface $uri URI to use as a base. + * @param string $key Key to set. + * @param string|null $value Value to set + * + * @return UriInterface + */ + public static function withQueryValue(UriInterface $uri, $key, $value) + { + $result = self::getFilteredQueryString($uri, [$key]); + + $result[] = self::generateQueryString($key, $value); + + return $uri->withQuery(implode('&', $result)); + } + + /** + * Creates a new URI with multiple specific query string values. + * + * It has the same behavior as withQueryValue() but for an associative array of key => value. + * + * @param UriInterface $uri URI to use as a base. + * @param array $keyValueArray Associative array of key and values + * + * @return UriInterface + */ + public static function withQueryValues(UriInterface $uri, array $keyValueArray) + { + $result = self::getFilteredQueryString($uri, array_keys($keyValueArray)); + + foreach ($keyValueArray as $key => $value) { + $result[] = self::generateQueryString($key, $value); + } + + return $uri->withQuery(implode('&', $result)); + } + + /** + * Creates a URI from a hash of `parse_url` components. + * + * @param array $parts + * + * @return UriInterface + * @link http://php.net/manual/en/function.parse-url.php + * + * @throws \InvalidArgumentException If the components do not form a valid URI. + */ + public static function fromParts(array $parts) + { + $uri = new self(); + $uri->applyParts($parts); + $uri->validateState(); + + return $uri; + } + + public function getScheme() + { + return $this->scheme; + } + + public function getAuthority() + { + $authority = $this->host; + if ($this->userInfo !== '') { + $authority = $this->userInfo . '@' . $authority; + } + + if ($this->port !== null) { + $authority .= ':' . $this->port; + } + + return $authority; + } + + public function getUserInfo() + { + return $this->userInfo; + } + + public function getHost() + { + return $this->host; + } + + public function getPort() + { + return $this->port; + } + + public function getPath() + { + return $this->path; + } + + public function getQuery() + { + return $this->query; + } + + public function getFragment() + { + return $this->fragment; + } + + public function withScheme($scheme) + { + $scheme = $this->filterScheme($scheme); + + if ($this->scheme === $scheme) { + return $this; + } + + $new = clone $this; + $new->scheme = $scheme; + $new->removeDefaultPort(); + $new->validateState(); + + return $new; + } + + public function withUserInfo($user, $password = null) + { + $info = $this->filterUserInfoComponent($user); + if ($password !== null) { + $info .= ':' . $this->filterUserInfoComponent($password); + } + + if ($this->userInfo === $info) { + return $this; + } + + $new = clone $this; + $new->userInfo = $info; + $new->validateState(); + + return $new; + } + + public function withHost($host) + { + $host = $this->filterHost($host); + + if ($this->host === $host) { + return $this; + } + + $new = clone $this; + $new->host = $host; + $new->validateState(); + + return $new; + } + + public function withPort($port) + { + $port = $this->filterPort($port); + + if ($this->port === $port) { + return $this; + } + + $new = clone $this; + $new->port = $port; + $new->removeDefaultPort(); + $new->validateState(); + + return $new; + } + + public function withPath($path) + { + $path = $this->filterPath($path); + + if ($this->path === $path) { + return $this; + } + + $new = clone $this; + $new->path = $path; + $new->validateState(); + + return $new; + } + + public function withQuery($query) + { + $query = $this->filterQueryAndFragment($query); + + if ($this->query === $query) { + return $this; + } + + $new = clone $this; + $new->query = $query; + + return $new; + } + + public function withFragment($fragment) + { + $fragment = $this->filterQueryAndFragment($fragment); + + if ($this->fragment === $fragment) { + return $this; + } + + $new = clone $this; + $new->fragment = $fragment; + + return $new; + } + + /** + * Apply parse_url parts to a URI. + * + * @param array $parts Array of parse_url parts to apply. + */ + private function applyParts(array $parts) + { + $this->scheme = isset($parts['scheme']) + ? $this->filterScheme($parts['scheme']) + : ''; + $this->userInfo = isset($parts['user']) + ? $this->filterUserInfoComponent($parts['user']) + : ''; + $this->host = isset($parts['host']) + ? $this->filterHost($parts['host']) + : ''; + $this->port = isset($parts['port']) + ? $this->filterPort($parts['port']) + : null; + $this->path = isset($parts['path']) + ? $this->filterPath($parts['path']) + : ''; + $this->query = isset($parts['query']) + ? $this->filterQueryAndFragment($parts['query']) + : ''; + $this->fragment = isset($parts['fragment']) + ? $this->filterQueryAndFragment($parts['fragment']) + : ''; + if (isset($parts['pass'])) { + $this->userInfo .= ':' . $this->filterUserInfoComponent($parts['pass']); + } + + $this->removeDefaultPort(); + } + + /** + * @param string $scheme + * + * @return string + * + * @throws \InvalidArgumentException If the scheme is invalid. + */ + private function filterScheme($scheme) + { + if (!is_string($scheme)) { + throw new \InvalidArgumentException('Scheme must be a string'); + } + + return strtolower($scheme); + } + + /** + * @param string $component + * + * @return string + * + * @throws \InvalidArgumentException If the user info is invalid. + */ + private function filterUserInfoComponent($component) + { + if (!is_string($component)) { + throw new \InvalidArgumentException('User info must be a string'); + } + + return preg_replace_callback( + '/(?:[^%' . self::$charUnreserved . self::$charSubDelims . ']+|%(?![A-Fa-f0-9]{2}))/', + [$this, 'rawurlencodeMatchZero'], + $component + ); + } + + /** + * @param string $host + * + * @return string + * + * @throws \InvalidArgumentException If the host is invalid. + */ + private function filterHost($host) + { + if (!is_string($host)) { + throw new \InvalidArgumentException('Host must be a string'); + } + + return strtolower($host); + } + + /** + * @param int|null $port + * + * @return int|null + * + * @throws \InvalidArgumentException If the port is invalid. + */ + private function filterPort($port) + { + if ($port === null) { + return null; + } + + $port = (int) $port; + if (0 > $port || 0xffff < $port) { + throw new \InvalidArgumentException( + sprintf('Invalid port: %d. Must be between 0 and 65535', $port) + ); + } + + return $port; + } + + /** + * @param UriInterface $uri + * @param array $keys + * + * @return array + */ + private static function getFilteredQueryString(UriInterface $uri, array $keys) + { + $current = $uri->getQuery(); + + if ($current === '') { + return []; + } + + $decodedKeys = array_map('rawurldecode', $keys); + + return array_filter(explode('&', $current), function ($part) use ($decodedKeys) { + return !in_array(rawurldecode(explode('=', $part)[0]), $decodedKeys, true); + }); + } + + /** + * @param string $key + * @param string|null $value + * + * @return string + */ + private static function generateQueryString($key, $value) + { + // Query string separators ("=", "&") within the key or value need to be encoded + // (while preventing double-encoding) before setting the query string. All other + // chars that need percent-encoding will be encoded by withQuery(). + $queryString = strtr($key, self::$replaceQuery); + + if ($value !== null) { + $queryString .= '=' . strtr($value, self::$replaceQuery); + } + + return $queryString; + } + + private function removeDefaultPort() + { + if ($this->port !== null && self::isDefaultPort($this)) { + $this->port = null; + } + } + + /** + * Filters the path of a URI + * + * @param string $path + * + * @return string + * + * @throws \InvalidArgumentException If the path is invalid. + */ + private function filterPath($path) + { + if (!is_string($path)) { + throw new \InvalidArgumentException('Path must be a string'); + } + + return preg_replace_callback( + '/(?:[^' . self::$charUnreserved . self::$charSubDelims . '%:@\/]++|%(?![A-Fa-f0-9]{2}))/', + [$this, 'rawurlencodeMatchZero'], + $path + ); + } + + /** + * Filters the query string or fragment of a URI. + * + * @param string $str + * + * @return string + * + * @throws \InvalidArgumentException If the query or fragment is invalid. + */ + private function filterQueryAndFragment($str) + { + if (!is_string($str)) { + throw new \InvalidArgumentException('Query and fragment must be a string'); + } + + return preg_replace_callback( + '/(?:[^' . self::$charUnreserved . self::$charSubDelims . '%:@\/\?]++|%(?![A-Fa-f0-9]{2}))/', + [$this, 'rawurlencodeMatchZero'], + $str + ); + } + + private function rawurlencodeMatchZero(array $match) + { + return rawurlencode($match[0]); + } + + private function validateState() + { + if ($this->host === '' && ($this->scheme === 'http' || $this->scheme === 'https')) { + $this->host = self::HTTP_DEFAULT_HOST; + } + + if ($this->getAuthority() === '') { + if (0 === strpos($this->path, '//')) { + throw new \InvalidArgumentException('The path of a URI without an authority must not start with two slashes "//"'); + } + if ($this->scheme === '' && false !== strpos(explode('/', $this->path, 2)[0], ':')) { + throw new \InvalidArgumentException('A relative URI must not have a path beginning with a segment containing a colon'); + } + } elseif (isset($this->path[0]) && $this->path[0] !== '/') { + @trigger_error( + 'The path of a URI with an authority must start with a slash "/" or be empty. Automagically fixing the URI ' . + 'by adding a leading slash to the path is deprecated since version 1.4 and will throw an exception instead.', + E_USER_DEPRECATED + ); + $this->path = '/'. $this->path; + //throw new \InvalidArgumentException('The path of a URI with an authority must start with a slash "/" or be empty'); + } + } +} diff --git a/vendor/guzzlehttp/psr7/src/UriNormalizer.php b/vendor/guzzlehttp/psr7/src/UriNormalizer.php new file mode 100644 index 00000000..9c8e662d --- /dev/null +++ b/vendor/guzzlehttp/psr7/src/UriNormalizer.php @@ -0,0 +1,216 @@ +getPath() === '' && + ($uri->getScheme() === 'http' || $uri->getScheme() === 'https') + ) { + $uri = $uri->withPath('/'); + } + + if ($flags & self::REMOVE_DEFAULT_HOST && $uri->getScheme() === 'file' && $uri->getHost() === 'localhost') { + $uri = $uri->withHost(''); + } + + if ($flags & self::REMOVE_DEFAULT_PORT && $uri->getPort() !== null && Uri::isDefaultPort($uri)) { + $uri = $uri->withPort(null); + } + + if ($flags & self::REMOVE_DOT_SEGMENTS && !Uri::isRelativePathReference($uri)) { + $uri = $uri->withPath(UriResolver::removeDotSegments($uri->getPath())); + } + + if ($flags & self::REMOVE_DUPLICATE_SLASHES) { + $uri = $uri->withPath(preg_replace('#//++#', '/', $uri->getPath())); + } + + if ($flags & self::SORT_QUERY_PARAMETERS && $uri->getQuery() !== '') { + $queryKeyValues = explode('&', $uri->getQuery()); + sort($queryKeyValues); + $uri = $uri->withQuery(implode('&', $queryKeyValues)); + } + + return $uri; + } + + /** + * Whether two URIs can be considered equivalent. + * + * Both URIs are normalized automatically before comparison with the given $normalizations bitmask. The method also + * accepts relative URI references and returns true when they are equivalent. This of course assumes they will be + * resolved against the same base URI. If this is not the case, determination of equivalence or difference of + * relative references does not mean anything. + * + * @param UriInterface $uri1 An URI to compare + * @param UriInterface $uri2 An URI to compare + * @param int $normalizations A bitmask of normalizations to apply, see constants + * + * @return bool + * @link https://tools.ietf.org/html/rfc3986#section-6.1 + */ + public static function isEquivalent(UriInterface $uri1, UriInterface $uri2, $normalizations = self::PRESERVING_NORMALIZATIONS) + { + return (string) self::normalize($uri1, $normalizations) === (string) self::normalize($uri2, $normalizations); + } + + private static function capitalizePercentEncoding(UriInterface $uri) + { + $regex = '/(?:%[A-Fa-f0-9]{2})++/'; + + $callback = function (array $match) { + return strtoupper($match[0]); + }; + + return + $uri->withPath( + preg_replace_callback($regex, $callback, $uri->getPath()) + )->withQuery( + preg_replace_callback($regex, $callback, $uri->getQuery()) + ); + } + + private static function decodeUnreservedCharacters(UriInterface $uri) + { + $regex = '/%(?:2D|2E|5F|7E|3[0-9]|[46][1-9A-F]|[57][0-9A])/i'; + + $callback = function (array $match) { + return rawurldecode($match[0]); + }; + + return + $uri->withPath( + preg_replace_callback($regex, $callback, $uri->getPath()) + )->withQuery( + preg_replace_callback($regex, $callback, $uri->getQuery()) + ); + } + + private function __construct() + { + // cannot be instantiated + } +} diff --git a/vendor/guzzlehttp/psr7/src/UriResolver.php b/vendor/guzzlehttp/psr7/src/UriResolver.php new file mode 100644 index 00000000..4bb5d1c5 --- /dev/null +++ b/vendor/guzzlehttp/psr7/src/UriResolver.php @@ -0,0 +1,219 @@ +getScheme() != '') { + return $rel->withPath(self::removeDotSegments($rel->getPath())); + } + + if ($rel->getAuthority() != '') { + $targetAuthority = $rel->getAuthority(); + $targetPath = self::removeDotSegments($rel->getPath()); + $targetQuery = $rel->getQuery(); + } else { + $targetAuthority = $base->getAuthority(); + if ($rel->getPath() === '') { + $targetPath = $base->getPath(); + $targetQuery = $rel->getQuery() != '' ? $rel->getQuery() : $base->getQuery(); + } else { + if ($rel->getPath()[0] === '/') { + $targetPath = $rel->getPath(); + } else { + if ($targetAuthority != '' && $base->getPath() === '') { + $targetPath = '/' . $rel->getPath(); + } else { + $lastSlashPos = strrpos($base->getPath(), '/'); + if ($lastSlashPos === false) { + $targetPath = $rel->getPath(); + } else { + $targetPath = substr($base->getPath(), 0, $lastSlashPos + 1) . $rel->getPath(); + } + } + } + $targetPath = self::removeDotSegments($targetPath); + $targetQuery = $rel->getQuery(); + } + } + + return new Uri(Uri::composeComponents( + $base->getScheme(), + $targetAuthority, + $targetPath, + $targetQuery, + $rel->getFragment() + )); + } + + /** + * Returns the target URI as a relative reference from the base URI. + * + * This method is the counterpart to resolve(): + * + * (string) $target === (string) UriResolver::resolve($base, UriResolver::relativize($base, $target)) + * + * One use-case is to use the current request URI as base URI and then generate relative links in your documents + * to reduce the document size or offer self-contained downloadable document archives. + * + * $base = new Uri('http://example.com/a/b/'); + * echo UriResolver::relativize($base, new Uri('http://example.com/a/b/c')); // prints 'c'. + * echo UriResolver::relativize($base, new Uri('http://example.com/a/x/y')); // prints '../x/y'. + * echo UriResolver::relativize($base, new Uri('http://example.com/a/b/?q')); // prints '?q'. + * echo UriResolver::relativize($base, new Uri('http://example.org/a/b/')); // prints '//example.org/a/b/'. + * + * This method also accepts a target that is already relative and will try to relativize it further. Only a + * relative-path reference will be returned as-is. + * + * echo UriResolver::relativize($base, new Uri('/a/b/c')); // prints 'c' as well + * + * @param UriInterface $base Base URI + * @param UriInterface $target Target URI + * + * @return UriInterface The relative URI reference + */ + public static function relativize(UriInterface $base, UriInterface $target) + { + if ($target->getScheme() !== '' && + ($base->getScheme() !== $target->getScheme() || $target->getAuthority() === '' && $base->getAuthority() !== '') + ) { + return $target; + } + + if (Uri::isRelativePathReference($target)) { + // As the target is already highly relative we return it as-is. It would be possible to resolve + // the target with `$target = self::resolve($base, $target);` and then try make it more relative + // by removing a duplicate query. But let's not do that automatically. + return $target; + } + + if ($target->getAuthority() !== '' && $base->getAuthority() !== $target->getAuthority()) { + return $target->withScheme(''); + } + + // We must remove the path before removing the authority because if the path starts with two slashes, the URI + // would turn invalid. And we also cannot set a relative path before removing the authority, as that is also + // invalid. + $emptyPathUri = $target->withScheme('')->withPath('')->withUserInfo('')->withPort(null)->withHost(''); + + if ($base->getPath() !== $target->getPath()) { + return $emptyPathUri->withPath(self::getRelativePath($base, $target)); + } + + if ($base->getQuery() === $target->getQuery()) { + // Only the target fragment is left. And it must be returned even if base and target fragment are the same. + return $emptyPathUri->withQuery(''); + } + + // If the base URI has a query but the target has none, we cannot return an empty path reference as it would + // inherit the base query component when resolving. + if ($target->getQuery() === '') { + $segments = explode('/', $target->getPath()); + $lastSegment = end($segments); + + return $emptyPathUri->withPath($lastSegment === '' ? './' : $lastSegment); + } + + return $emptyPathUri; + } + + private static function getRelativePath(UriInterface $base, UriInterface $target) + { + $sourceSegments = explode('/', $base->getPath()); + $targetSegments = explode('/', $target->getPath()); + array_pop($sourceSegments); + $targetLastSegment = array_pop($targetSegments); + foreach ($sourceSegments as $i => $segment) { + if (isset($targetSegments[$i]) && $segment === $targetSegments[$i]) { + unset($sourceSegments[$i], $targetSegments[$i]); + } else { + break; + } + } + $targetSegments[] = $targetLastSegment; + $relativePath = str_repeat('../', count($sourceSegments)) . implode('/', $targetSegments); + + // A reference to am empty last segment or an empty first sub-segment must be prefixed with "./". + // This also applies to a segment with a colon character (e.g., "file:colon") that cannot be used + // as the first segment of a relative-path reference, as it would be mistaken for a scheme name. + if ('' === $relativePath || false !== strpos(explode('/', $relativePath, 2)[0], ':')) { + $relativePath = "./$relativePath"; + } elseif ('/' === $relativePath[0]) { + if ($base->getAuthority() != '' && $base->getPath() === '') { + // In this case an extra slash is added by resolve() automatically. So we must not add one here. + $relativePath = ".$relativePath"; + } else { + $relativePath = "./$relativePath"; + } + } + + return $relativePath; + } + + private function __construct() + { + // cannot be instantiated + } +} diff --git a/vendor/guzzlehttp/psr7/src/functions.php b/vendor/guzzlehttp/psr7/src/functions.php new file mode 100644 index 00000000..2bc3f804 --- /dev/null +++ b/vendor/guzzlehttp/psr7/src/functions.php @@ -0,0 +1,899 @@ +getMethod() . ' ' + . $message->getRequestTarget()) + . ' HTTP/' . $message->getProtocolVersion(); + if (!$message->hasHeader('host')) { + $msg .= "\r\nHost: " . $message->getUri()->getHost(); + } + } elseif ($message instanceof ResponseInterface) { + $msg = 'HTTP/' . $message->getProtocolVersion() . ' ' + . $message->getStatusCode() . ' ' + . $message->getReasonPhrase(); + } else { + throw new \InvalidArgumentException('Unknown message type'); + } + + foreach ($message->getHeaders() as $name => $values) { + $msg .= "\r\n{$name}: " . implode(', ', $values); + } + + return "{$msg}\r\n\r\n" . $message->getBody(); +} + +/** + * Returns a UriInterface for the given value. + * + * This function accepts a string or {@see Psr\Http\Message\UriInterface} and + * returns a UriInterface for the given value. If the value is already a + * `UriInterface`, it is returned as-is. + * + * @param string|UriInterface $uri + * + * @return UriInterface + * @throws \InvalidArgumentException + */ +function uri_for($uri) +{ + if ($uri instanceof UriInterface) { + return $uri; + } elseif (is_string($uri)) { + return new Uri($uri); + } + + throw new \InvalidArgumentException('URI must be a string or UriInterface'); +} + +/** + * Create a new stream based on the input type. + * + * Options is an associative array that can contain the following keys: + * - metadata: Array of custom metadata. + * - size: Size of the stream. + * + * @param resource|string|null|int|float|bool|StreamInterface|callable|\Iterator $resource Entity body data + * @param array $options Additional options + * + * @return StreamInterface + * @throws \InvalidArgumentException if the $resource arg is not valid. + */ +function stream_for($resource = '', array $options = []) +{ + if (is_scalar($resource)) { + $stream = fopen('php://temp', 'r+'); + if ($resource !== '') { + fwrite($stream, $resource); + fseek($stream, 0); + } + return new Stream($stream, $options); + } + + switch (gettype($resource)) { + case 'resource': + return new Stream($resource, $options); + case 'object': + if ($resource instanceof StreamInterface) { + return $resource; + } elseif ($resource instanceof \Iterator) { + return new PumpStream(function () use ($resource) { + if (!$resource->valid()) { + return false; + } + $result = $resource->current(); + $resource->next(); + return $result; + }, $options); + } elseif (method_exists($resource, '__toString')) { + return stream_for((string) $resource, $options); + } + break; + case 'NULL': + return new Stream(fopen('php://temp', 'r+'), $options); + } + + if (is_callable($resource)) { + return new PumpStream($resource, $options); + } + + throw new \InvalidArgumentException('Invalid resource type: ' . gettype($resource)); +} + +/** + * Parse an array of header values containing ";" separated data into an + * array of associative arrays representing the header key value pair + * data of the header. When a parameter does not contain a value, but just + * contains a key, this function will inject a key with a '' string value. + * + * @param string|array $header Header to parse into components. + * + * @return array Returns the parsed header values. + */ +function parse_header($header) +{ + static $trimmed = "\"' \n\t\r"; + $params = $matches = []; + + foreach (normalize_header($header) as $val) { + $part = []; + foreach (preg_split('/;(?=([^"]*"[^"]*")*[^"]*$)/', $val) as $kvp) { + if (preg_match_all('/<[^>]+>|[^=]+/', $kvp, $matches)) { + $m = $matches[0]; + if (isset($m[1])) { + $part[trim($m[0], $trimmed)] = trim($m[1], $trimmed); + } else { + $part[] = trim($m[0], $trimmed); + } + } + } + if ($part) { + $params[] = $part; + } + } + + return $params; +} + +/** + * Converts an array of header values that may contain comma separated + * headers into an array of headers with no comma separated values. + * + * @param string|array $header Header to normalize. + * + * @return array Returns the normalized header field values. + */ +function normalize_header($header) +{ + if (!is_array($header)) { + return array_map('trim', explode(',', $header)); + } + + $result = []; + foreach ($header as $value) { + foreach ((array) $value as $v) { + if (strpos($v, ',') === false) { + $result[] = $v; + continue; + } + foreach (preg_split('/,(?=([^"]*"[^"]*")*[^"]*$)/', $v) as $vv) { + $result[] = trim($vv); + } + } + } + + return $result; +} + +/** + * Clone and modify a request with the given changes. + * + * The changes can be one of: + * - method: (string) Changes the HTTP method. + * - set_headers: (array) Sets the given headers. + * - remove_headers: (array) Remove the given headers. + * - body: (mixed) Sets the given body. + * - uri: (UriInterface) Set the URI. + * - query: (string) Set the query string value of the URI. + * - version: (string) Set the protocol version. + * + * @param RequestInterface $request Request to clone and modify. + * @param array $changes Changes to apply. + * + * @return RequestInterface + */ +function modify_request(RequestInterface $request, array $changes) +{ + if (!$changes) { + return $request; + } + + $headers = $request->getHeaders(); + + if (!isset($changes['uri'])) { + $uri = $request->getUri(); + } else { + // Remove the host header if one is on the URI + if ($host = $changes['uri']->getHost()) { + $changes['set_headers']['Host'] = $host; + + if ($port = $changes['uri']->getPort()) { + $standardPorts = ['http' => 80, 'https' => 443]; + $scheme = $changes['uri']->getScheme(); + if (isset($standardPorts[$scheme]) && $port != $standardPorts[$scheme]) { + $changes['set_headers']['Host'] .= ':'.$port; + } + } + } + $uri = $changes['uri']; + } + + if (!empty($changes['remove_headers'])) { + $headers = _caseless_remove($changes['remove_headers'], $headers); + } + + if (!empty($changes['set_headers'])) { + $headers = _caseless_remove(array_keys($changes['set_headers']), $headers); + $headers = $changes['set_headers'] + $headers; + } + + if (isset($changes['query'])) { + $uri = $uri->withQuery($changes['query']); + } + + if ($request instanceof ServerRequestInterface) { + return (new ServerRequest( + isset($changes['method']) ? $changes['method'] : $request->getMethod(), + $uri, + $headers, + isset($changes['body']) ? $changes['body'] : $request->getBody(), + isset($changes['version']) + ? $changes['version'] + : $request->getProtocolVersion(), + $request->getServerParams() + )) + ->withParsedBody($request->getParsedBody()) + ->withQueryParams($request->getQueryParams()) + ->withCookieParams($request->getCookieParams()) + ->withUploadedFiles($request->getUploadedFiles()); + } + + return new Request( + isset($changes['method']) ? $changes['method'] : $request->getMethod(), + $uri, + $headers, + isset($changes['body']) ? $changes['body'] : $request->getBody(), + isset($changes['version']) + ? $changes['version'] + : $request->getProtocolVersion() + ); +} + +/** + * Attempts to rewind a message body and throws an exception on failure. + * + * The body of the message will only be rewound if a call to `tell()` returns a + * value other than `0`. + * + * @param MessageInterface $message Message to rewind + * + * @throws \RuntimeException + */ +function rewind_body(MessageInterface $message) +{ + $body = $message->getBody(); + + if ($body->tell()) { + $body->rewind(); + } +} + +/** + * Safely opens a PHP stream resource using a filename. + * + * When fopen fails, PHP normally raises a warning. This function adds an + * error handler that checks for errors and throws an exception instead. + * + * @param string $filename File to open + * @param string $mode Mode used to open the file + * + * @return resource + * @throws \RuntimeException if the file cannot be opened + */ +function try_fopen($filename, $mode) +{ + $ex = null; + set_error_handler(function () use ($filename, $mode, &$ex) { + $ex = new \RuntimeException(sprintf( + 'Unable to open %s using mode %s: %s', + $filename, + $mode, + func_get_args()[1] + )); + }); + + $handle = fopen($filename, $mode); + restore_error_handler(); + + if ($ex) { + /** @var $ex \RuntimeException */ + throw $ex; + } + + return $handle; +} + +/** + * Copy the contents of a stream into a string until the given number of + * bytes have been read. + * + * @param StreamInterface $stream Stream to read + * @param int $maxLen Maximum number of bytes to read. Pass -1 + * to read the entire stream. + * @return string + * @throws \RuntimeException on error. + */ +function copy_to_string(StreamInterface $stream, $maxLen = -1) +{ + $buffer = ''; + + if ($maxLen === -1) { + while (!$stream->eof()) { + $buf = $stream->read(1048576); + // Using a loose equality here to match on '' and false. + if ($buf == null) { + break; + } + $buffer .= $buf; + } + return $buffer; + } + + $len = 0; + while (!$stream->eof() && $len < $maxLen) { + $buf = $stream->read($maxLen - $len); + // Using a loose equality here to match on '' and false. + if ($buf == null) { + break; + } + $buffer .= $buf; + $len = strlen($buffer); + } + + return $buffer; +} + +/** + * Copy the contents of a stream into another stream until the given number + * of bytes have been read. + * + * @param StreamInterface $source Stream to read from + * @param StreamInterface $dest Stream to write to + * @param int $maxLen Maximum number of bytes to read. Pass -1 + * to read the entire stream. + * + * @throws \RuntimeException on error. + */ +function copy_to_stream( + StreamInterface $source, + StreamInterface $dest, + $maxLen = -1 +) { + $bufferSize = 8192; + + if ($maxLen === -1) { + while (!$source->eof()) { + if (!$dest->write($source->read($bufferSize))) { + break; + } + } + } else { + $remaining = $maxLen; + while ($remaining > 0 && !$source->eof()) { + $buf = $source->read(min($bufferSize, $remaining)); + $len = strlen($buf); + if (!$len) { + break; + } + $remaining -= $len; + $dest->write($buf); + } + } +} + +/** + * Calculate a hash of a Stream + * + * @param StreamInterface $stream Stream to calculate the hash for + * @param string $algo Hash algorithm (e.g. md5, crc32, etc) + * @param bool $rawOutput Whether or not to use raw output + * + * @return string Returns the hash of the stream + * @throws \RuntimeException on error. + */ +function hash( + StreamInterface $stream, + $algo, + $rawOutput = false +) { + $pos = $stream->tell(); + + if ($pos > 0) { + $stream->rewind(); + } + + $ctx = hash_init($algo); + while (!$stream->eof()) { + hash_update($ctx, $stream->read(1048576)); + } + + $out = hash_final($ctx, (bool) $rawOutput); + $stream->seek($pos); + + return $out; +} + +/** + * Read a line from the stream up to the maximum allowed buffer length + * + * @param StreamInterface $stream Stream to read from + * @param int $maxLength Maximum buffer length + * + * @return string + */ +function readline(StreamInterface $stream, $maxLength = null) +{ + $buffer = ''; + $size = 0; + + while (!$stream->eof()) { + // Using a loose equality here to match on '' and false. + if (null == ($byte = $stream->read(1))) { + return $buffer; + } + $buffer .= $byte; + // Break when a new line is found or the max length - 1 is reached + if ($byte === "\n" || ++$size === $maxLength - 1) { + break; + } + } + + return $buffer; +} + +/** + * Parses a request message string into a request object. + * + * @param string $message Request message string. + * + * @return Request + */ +function parse_request($message) +{ + $data = _parse_message($message); + $matches = []; + if (!preg_match('/^[\S]+\s+([a-zA-Z]+:\/\/|\/).*/', $data['start-line'], $matches)) { + throw new \InvalidArgumentException('Invalid request string'); + } + $parts = explode(' ', $data['start-line'], 3); + $version = isset($parts[2]) ? explode('/', $parts[2])[1] : '1.1'; + + $request = new Request( + $parts[0], + $matches[1] === '/' ? _parse_request_uri($parts[1], $data['headers']) : $parts[1], + $data['headers'], + $data['body'], + $version + ); + + return $matches[1] === '/' ? $request : $request->withRequestTarget($parts[1]); +} + +/** + * Parses a response message string into a response object. + * + * @param string $message Response message string. + * + * @return Response + */ +function parse_response($message) +{ + $data = _parse_message($message); + // According to https://tools.ietf.org/html/rfc7230#section-3.1.2 the space + // between status-code and reason-phrase is required. But browsers accept + // responses without space and reason as well. + if (!preg_match('/^HTTP\/.* [0-9]{3}( .*|$)/', $data['start-line'])) { + throw new \InvalidArgumentException('Invalid response string: ' . $data['start-line']); + } + $parts = explode(' ', $data['start-line'], 3); + + return new Response( + $parts[1], + $data['headers'], + $data['body'], + explode('/', $parts[0])[1], + isset($parts[2]) ? $parts[2] : null + ); +} + +/** + * Parse a query string into an associative array. + * + * If multiple values are found for the same key, the value of that key + * value pair will become an array. This function does not parse nested + * PHP style arrays into an associative array (e.g., foo[a]=1&foo[b]=2 will + * be parsed into ['foo[a]' => '1', 'foo[b]' => '2']). + * + * @param string $str Query string to parse + * @param int|bool $urlEncoding How the query string is encoded + * + * @return array + */ +function parse_query($str, $urlEncoding = true) +{ + $result = []; + + if ($str === '') { + return $result; + } + + if ($urlEncoding === true) { + $decoder = function ($value) { + return rawurldecode(str_replace('+', ' ', $value)); + }; + } elseif ($urlEncoding === PHP_QUERY_RFC3986) { + $decoder = 'rawurldecode'; + } elseif ($urlEncoding === PHP_QUERY_RFC1738) { + $decoder = 'urldecode'; + } else { + $decoder = function ($str) { return $str; }; + } + + foreach (explode('&', $str) as $kvp) { + $parts = explode('=', $kvp, 2); + $key = $decoder($parts[0]); + $value = isset($parts[1]) ? $decoder($parts[1]) : null; + if (!isset($result[$key])) { + $result[$key] = $value; + } else { + if (!is_array($result[$key])) { + $result[$key] = [$result[$key]]; + } + $result[$key][] = $value; + } + } + + return $result; +} + +/** + * Build a query string from an array of key value pairs. + * + * This function can use the return value of parse_query() to build a query + * string. This function does not modify the provided keys when an array is + * encountered (like http_build_query would). + * + * @param array $params Query string parameters. + * @param int|false $encoding Set to false to not encode, PHP_QUERY_RFC3986 + * to encode using RFC3986, or PHP_QUERY_RFC1738 + * to encode using RFC1738. + * @return string + */ +function build_query(array $params, $encoding = PHP_QUERY_RFC3986) +{ + if (!$params) { + return ''; + } + + if ($encoding === false) { + $encoder = function ($str) { return $str; }; + } elseif ($encoding === PHP_QUERY_RFC3986) { + $encoder = 'rawurlencode'; + } elseif ($encoding === PHP_QUERY_RFC1738) { + $encoder = 'urlencode'; + } else { + throw new \InvalidArgumentException('Invalid type'); + } + + $qs = ''; + foreach ($params as $k => $v) { + $k = $encoder($k); + if (!is_array($v)) { + $qs .= $k; + if ($v !== null) { + $qs .= '=' . $encoder($v); + } + $qs .= '&'; + } else { + foreach ($v as $vv) { + $qs .= $k; + if ($vv !== null) { + $qs .= '=' . $encoder($vv); + } + $qs .= '&'; + } + } + } + + return $qs ? (string) substr($qs, 0, -1) : ''; +} + +/** + * Determines the mimetype of a file by looking at its extension. + * + * @param $filename + * + * @return null|string + */ +function mimetype_from_filename($filename) +{ + return mimetype_from_extension(pathinfo($filename, PATHINFO_EXTENSION)); +} + +/** + * Maps a file extensions to a mimetype. + * + * @param $extension string The file extension. + * + * @return string|null + * @link http://svn.apache.org/repos/asf/httpd/httpd/branches/1.3.x/conf/mime.types + */ +function mimetype_from_extension($extension) +{ + static $mimetypes = [ + '3gp' => 'video/3gpp', + '7z' => 'application/x-7z-compressed', + 'aac' => 'audio/x-aac', + 'ai' => 'application/postscript', + 'aif' => 'audio/x-aiff', + 'asc' => 'text/plain', + 'asf' => 'video/x-ms-asf', + 'atom' => 'application/atom+xml', + 'avi' => 'video/x-msvideo', + 'bmp' => 'image/bmp', + 'bz2' => 'application/x-bzip2', + 'cer' => 'application/pkix-cert', + 'crl' => 'application/pkix-crl', + 'crt' => 'application/x-x509-ca-cert', + 'css' => 'text/css', + 'csv' => 'text/csv', + 'cu' => 'application/cu-seeme', + 'deb' => 'application/x-debian-package', + 'doc' => 'application/msword', + 'docx' => 'application/vnd.openxmlformats-officedocument.wordprocessingml.document', + 'dvi' => 'application/x-dvi', + 'eot' => 'application/vnd.ms-fontobject', + 'eps' => 'application/postscript', + 'epub' => 'application/epub+zip', + 'etx' => 'text/x-setext', + 'flac' => 'audio/flac', + 'flv' => 'video/x-flv', + 'gif' => 'image/gif', + 'gz' => 'application/gzip', + 'htm' => 'text/html', + 'html' => 'text/html', + 'ico' => 'image/x-icon', + 'ics' => 'text/calendar', + 'ini' => 'text/plain', + 'iso' => 'application/x-iso9660-image', + 'jar' => 'application/java-archive', + 'jpe' => 'image/jpeg', + 'jpeg' => 'image/jpeg', + 'jpg' => 'image/jpeg', + 'js' => 'text/javascript', + 'json' => 'application/json', + 'latex' => 'application/x-latex', + 'log' => 'text/plain', + 'm4a' => 'audio/mp4', + 'm4v' => 'video/mp4', + 'mid' => 'audio/midi', + 'midi' => 'audio/midi', + 'mov' => 'video/quicktime', + 'mkv' => 'video/x-matroska', + 'mp3' => 'audio/mpeg', + 'mp4' => 'video/mp4', + 'mp4a' => 'audio/mp4', + 'mp4v' => 'video/mp4', + 'mpe' => 'video/mpeg', + 'mpeg' => 'video/mpeg', + 'mpg' => 'video/mpeg', + 'mpg4' => 'video/mp4', + 'oga' => 'audio/ogg', + 'ogg' => 'audio/ogg', + 'ogv' => 'video/ogg', + 'ogx' => 'application/ogg', + 'pbm' => 'image/x-portable-bitmap', + 'pdf' => 'application/pdf', + 'pgm' => 'image/x-portable-graymap', + 'png' => 'image/png', + 'pnm' => 'image/x-portable-anymap', + 'ppm' => 'image/x-portable-pixmap', + 'ppt' => 'application/vnd.ms-powerpoint', + 'pptx' => 'application/vnd.openxmlformats-officedocument.presentationml.presentation', + 'ps' => 'application/postscript', + 'qt' => 'video/quicktime', + 'rar' => 'application/x-rar-compressed', + 'ras' => 'image/x-cmu-raster', + 'rss' => 'application/rss+xml', + 'rtf' => 'application/rtf', + 'sgm' => 'text/sgml', + 'sgml' => 'text/sgml', + 'svg' => 'image/svg+xml', + 'swf' => 'application/x-shockwave-flash', + 'tar' => 'application/x-tar', + 'tif' => 'image/tiff', + 'tiff' => 'image/tiff', + 'torrent' => 'application/x-bittorrent', + 'ttf' => 'application/x-font-ttf', + 'txt' => 'text/plain', + 'wav' => 'audio/x-wav', + 'webm' => 'video/webm', + 'webp' => 'image/webp', + 'wma' => 'audio/x-ms-wma', + 'wmv' => 'video/x-ms-wmv', + 'woff' => 'application/x-font-woff', + 'wsdl' => 'application/wsdl+xml', + 'xbm' => 'image/x-xbitmap', + 'xls' => 'application/vnd.ms-excel', + 'xlsx' => 'application/vnd.openxmlformats-officedocument.spreadsheetml.sheet', + 'xml' => 'application/xml', + 'xpm' => 'image/x-xpixmap', + 'xwd' => 'image/x-xwindowdump', + 'yaml' => 'text/yaml', + 'yml' => 'text/yaml', + 'zip' => 'application/zip', + ]; + + $extension = strtolower($extension); + + return isset($mimetypes[$extension]) + ? $mimetypes[$extension] + : null; +} + +/** + * Parses an HTTP message into an associative array. + * + * The array contains the "start-line" key containing the start line of + * the message, "headers" key containing an associative array of header + * array values, and a "body" key containing the body of the message. + * + * @param string $message HTTP request or response to parse. + * + * @return array + * @internal + */ +function _parse_message($message) +{ + if (!$message) { + throw new \InvalidArgumentException('Invalid message'); + } + + $message = ltrim($message, "\r\n"); + + $messageParts = preg_split("/\r?\n\r?\n/", $message, 2); + + if ($messageParts === false || count($messageParts) !== 2) { + throw new \InvalidArgumentException('Invalid message: Missing header delimiter'); + } + + list($rawHeaders, $body) = $messageParts; + $rawHeaders .= "\r\n"; // Put back the delimiter we split previously + $headerParts = preg_split("/\r?\n/", $rawHeaders, 2); + + if ($headerParts === false || count($headerParts) !== 2) { + throw new \InvalidArgumentException('Invalid message: Missing status line'); + } + + list($startLine, $rawHeaders) = $headerParts; + + if (preg_match("/(?:^HTTP\/|^[A-Z]+ \S+ HTTP\/)(\d+(?:\.\d+)?)/i", $startLine, $matches) && $matches[1] === '1.0') { + // Header folding is deprecated for HTTP/1.1, but allowed in HTTP/1.0 + $rawHeaders = preg_replace(Rfc7230::HEADER_FOLD_REGEX, ' ', $rawHeaders); + } + + /** @var array[] $headerLines */ + $count = preg_match_all(Rfc7230::HEADER_REGEX, $rawHeaders, $headerLines, PREG_SET_ORDER); + + // If these aren't the same, then one line didn't match and there's an invalid header. + if ($count !== substr_count($rawHeaders, "\n")) { + // Folding is deprecated, see https://tools.ietf.org/html/rfc7230#section-3.2.4 + if (preg_match(Rfc7230::HEADER_FOLD_REGEX, $rawHeaders)) { + throw new \InvalidArgumentException('Invalid header syntax: Obsolete line folding'); + } + + throw new \InvalidArgumentException('Invalid header syntax'); + } + + $headers = []; + + foreach ($headerLines as $headerLine) { + $headers[$headerLine[1]][] = $headerLine[2]; + } + + return [ + 'start-line' => $startLine, + 'headers' => $headers, + 'body' => $body, + ]; +} + +/** + * Constructs a URI for an HTTP request message. + * + * @param string $path Path from the start-line + * @param array $headers Array of headers (each value an array). + * + * @return string + * @internal + */ +function _parse_request_uri($path, array $headers) +{ + $hostKey = array_filter(array_keys($headers), function ($k) { + return strtolower($k) === 'host'; + }); + + // If no host is found, then a full URI cannot be constructed. + if (!$hostKey) { + return $path; + } + + $host = $headers[reset($hostKey)][0]; + $scheme = substr($host, -4) === ':443' ? 'https' : 'http'; + + return $scheme . '://' . $host . '/' . ltrim($path, '/'); +} + +/** + * Get a short summary of the message body + * + * Will return `null` if the response is not printable. + * + * @param MessageInterface $message The message to get the body summary + * @param int $truncateAt The maximum allowed size of the summary + * + * @return null|string + */ +function get_message_body_summary(MessageInterface $message, $truncateAt = 120) +{ + $body = $message->getBody(); + + if (!$body->isSeekable() || !$body->isReadable()) { + return null; + } + + $size = $body->getSize(); + + if ($size === 0) { + return null; + } + + $summary = $body->read($truncateAt); + $body->rewind(); + + if ($size > $truncateAt) { + $summary .= ' (truncated...)'; + } + + // Matches any printable character, including unicode characters: + // letters, marks, numbers, punctuation, spacing, and separators. + if (preg_match('/[^\pL\pM\pN\pP\pS\pZ\n\r\t]/', $summary)) { + return null; + } + + return $summary; +} + +/** @internal */ +function _caseless_remove($keys, array $data) +{ + $result = []; + + foreach ($keys as &$key) { + $key = strtolower($key); + } + + foreach ($data as $k => $v) { + if (!in_array(strtolower($k), $keys)) { + $result[$k] = $v; + } + } + + return $result; +} diff --git a/vendor/guzzlehttp/psr7/src/functions_include.php b/vendor/guzzlehttp/psr7/src/functions_include.php new file mode 100644 index 00000000..e1879581 --- /dev/null +++ b/vendor/guzzlehttp/psr7/src/functions_include.php @@ -0,0 +1,6 @@ + + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +THE SOFTWARE. diff --git a/vendor/kevinlebrun/colors.php/composer.json b/vendor/kevinlebrun/colors.php/composer.json new file mode 100644 index 00000000..0ec45d93 --- /dev/null +++ b/vendor/kevinlebrun/colors.php/composer.json @@ -0,0 +1,30 @@ +{ + "name": "kevinlebrun/colors.php", + "description": "Colors for PHP CLI scripts", + "keywords": ["colors", "color", "console", "cli", "shell"], + "homepage": "https://github.com/kevinlebrun/colors.php", + "type": "library", + "authors": [ + { + "name": "Kevin Le Brun", + "email": "lebrun.k@gmail.com", + "homepage": "http://kevinlebrun.fr", + "role": "developer" + } + ], + "license": "MIT", + "require": { + "php": ">=5.3.0" + }, + "require-dev": { + "phpunit/phpunit": "3.7.*", + "squizlabs/php_codesniffer": "1.*", + "satooshi/php-coveralls": "1.0.*" + }, + "config": { + "bin-dir": "bin" + }, + "autoload": { + "psr-0": { "Colors": "src/" } + } +} diff --git a/vendor/kevinlebrun/colors.php/src/Colors/Color.php b/vendor/kevinlebrun/colors.php/src/Colors/Color.php new file mode 100644 index 00000000..b36d8230 --- /dev/null +++ b/vendor/kevinlebrun/colors.php/src/Colors/Color.php @@ -0,0 +1,334 @@ +(.*?)#s'; + /** @link http://www.php.net/manual/en/functions.user-defined.php */ + const STYLE_NAME_PATTERN = '/^[a-zA-Z_\x7f-\xff][a-zA-Z0-9_\x7f-\xff]*$/'; + + const ESC = "\033["; + const ESC_SEQ_PATTERN = "\033[%sm"; + + protected $initial = ''; + protected $wrapped = ''; + // italic and blink may not work depending of your terminal + protected $styles = array( + 'reset' => '0', + 'bold' => '1', + 'dark' => '2', + 'italic' => '3', + 'underline' => '4', + 'blink' => '5', + 'reverse' => '7', + 'concealed' => '8', + + 'default' => '39', + 'black' => '30', + 'red' => '31', + 'green' => '32', + 'yellow' => '33', + 'blue' => '34', + 'magenta' => '35', + 'cyan' => '36', + 'light_gray' => '37', + + 'dark_gray' => '90', + 'light_red' => '91', + 'light_green' => '92', + 'light_yellow' => '93', + 'light_blue' => '94', + 'light_magenta' => '95', + 'light_cyan' => '96', + 'white' => '97', + + 'bg_default' => '49', + 'bg_black' => '40', + 'bg_red' => '41', + 'bg_green' => '42', + 'bg_yellow' => '43', + 'bg_blue' => '44', + 'bg_magenta' => '45', + 'bg_cyan' => '46', + 'bg_light_gray' => '47', + + 'bg_dark_gray' => '100', + 'bg_light_red' => '101', + 'bg_light_green' => '102', + 'bg_light_yellow' => '103', + 'bg_light_blue' => '104', + 'bg_light_magenta' => '105', + 'bg_light_cyan' => '106', + 'bg_white' => '107', + ); + protected $userStyles = array(); + protected $isStyleForced = false; + + public function __construct($string = '') + { + $this->setInternalState($string); + } + + public function __invoke($string) + { + return $this->setInternalState($string); + } + + public function __call($method, $args) + { + if (count($args) >= 1) { + return $this->apply($method, $args[0]); + } + + return $this->apply($method); + } + + public function __get($name) + { + return $this->apply($name); + } + + public function __toString() + { + return $this->wrapped; + } + + public function setForceStyle($force) + { + $this->isStyleForced = (bool) $force; + } + + public function isStyleForced() + { + return $this->isStyleForced; + } + + /** + * Returns true if the stream supports colorization. + * + * Colorization is disabled if not supported by the stream: + * + * - Windows without Ansicon, ConEmu or Babun + * - non tty consoles + * + * @return bool true if the stream supports colorization, false otherwise + * + * @link https://github.com/symfony/Console/blob/master/Output/StreamOutput.php#L94 + * @codeCoverageIgnore + */ + public function isSupported() + { + if (DIRECTORY_SEPARATOR === '\\') { + return (function_exists('sapi_windows_vt100_support') + && @sapi_windows_vt100_support(STDOUT)) + || false !== getenv('ANSICON') + || 'ON' === getenv('ConEmuANSI') + || 'xterm' === getenv('TERM'); + } + + if (function_exists('stream_isatty')) { + return @stream_isatty(STDOUT); + } + + if (function_exists('posix_isatty')) { + return @posix_isatty(STDOUT); + } + + $stat = @fstat($this->stream); + // Check if formatted mode is S_IFCHR + return $stat ? 0020000 === ($stat['mode'] & 0170000) : false; + } + + /** + * @codeCoverageIgnore + */ + public function are256ColorsSupported() + { + return DIRECTORY_SEPARATOR === '/' && false !== strpos(getenv('TERM'), '256color'); + } + + protected function setInternalState($string) + { + $this->initial = $this->wrapped = (string) $string; + return $this; + } + + protected function stylize($style, $text) + { + if (!$this->shouldStylize()) { + return $text; + } + + $style = strtolower($style); + + if ($this->isUserStyleExists($style)) { + return $this->applyUserStyle($style, $text); + } + + if ($this->isStyleExists($style)) { + return $this->applyStyle($style, $text); + } + + if (preg_match('/^((?:bg_)?)color\[([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\]$/', $style, $matches)) { + $option = $matches[1] == 'bg_' ? 48 : 38; + return $this->buildEscSeq("{$option};5;{$matches[2]}") . $text . $this->buildEscSeq($this->styles['reset']); + } + + throw new NoStyleFoundException("Invalid style $style"); + } + + protected function shouldStylize() + { + return $this->isStyleForced() || $this->isSupported(); + } + + protected function isStyleExists($style) + { + return array_key_exists($style, $this->styles); + } + + protected function applyStyle($style, $text) + { + return $this->buildEscSeq($this->styles[$style]) . $text . $this->buildEscSeq($this->styles['reset']); + } + + protected function buildEscSeq($style) + { + return sprintf(self::ESC_SEQ_PATTERN, $style); + } + + protected function isUserStyleExists($style) + { + return array_key_exists($style, $this->userStyles); + } + + protected function applyUserStyle($userStyle, $text) + { + $styles = (array) $this->userStyles[$userStyle]; + + foreach ($styles as $style) { + $text = $this->stylize($style, $text); + } + + return $text; + } + + public function apply($style, $text = null) + { + if ($text === null) { + $this->wrapped = $this->stylize($style, $this->wrapped); + return $this; + } + + return $this->stylize($style, $text); + } + + public function fg($color, $text = null) + { + return $this->apply($color, $text); + } + + public function bg($color, $text = null) + { + return $this->apply('bg_' . $color, $text); + } + + public function highlight($color, $text = null) + { + return $this->bg($color, $text); + } + + public function reset() + { + $this->wrapped = $this->initial; + return $this; + } + + public function center($width = 80, $text = null) + { + if ($text === null) { + $text = $this->wrapped; + } + + $centered = ''; + foreach (explode(PHP_EOL, $text) as $line) { + $line = trim($line); + $lineWidth = strlen($line) - mb_strlen($line, 'UTF-8') + $width; + $centered .= str_pad($line, $lineWidth, ' ', STR_PAD_BOTH) . PHP_EOL; + } + + $this->setInternalState(trim($centered, PHP_EOL)); + return $this; + } + + protected function stripColors($text) + { + return preg_replace('/' . preg_quote(self::ESC) . '\d+m/', '', $text); + } + + public function clean($text = null) + { + if ($text === null) { + $this->wrapped = $this->stripColors($this->wrapped); + return $this; + } + + return $this->stripColors($text); + } + + public function strip($text = null) + { + return $this->clean($text); + } + + public function isAValidStyleName($name) + { + return preg_match(self::STYLE_NAME_PATTERN, $name); + } + + /** + * @deprecated + * @codeCoverageIgnore + */ + public function setTheme(array $theme) + { + return $this->setUserStyles($theme); + } + + public function setUserStyles(array $userStyles) + { + foreach ($userStyles as $name => $styles) { + if (!$this->isAValidStyleName($name)) { + throw new InvalidStyleNameException("$name is not a valid style name"); + } + + if (in_array($name, (array) $styles)) { + throw new RecursionInUserStylesException('User style cannot reference itself.'); + } + } + + $this->userStyles = $userStyles; + return $this; + } + + protected function colorizeText($text) + { + return preg_replace_callback(self::FORMAT_PATTERN, array($this, 'replaceStyle'), $text); + } + + public function colorize($text = null) + { + if ($text === null) { + $this->wrapped = $this->colorizeText($this->wrapped); + return $this; + } + + return $this->colorizeText($text); + } + + protected function replaceStyle($matches) + { + return $this->apply($matches[1], $this->colorize($matches[2])); + } +} diff --git a/vendor/kevinlebrun/colors.php/src/Colors/Exception.php b/vendor/kevinlebrun/colors.php/src/Colors/Exception.php new file mode 100644 index 00000000..ee8739cb --- /dev/null +++ b/vendor/kevinlebrun/colors.php/src/Colors/Exception.php @@ -0,0 +1,7 @@ +useMicrosecondTimestamps(false)`, disabling it gets you a bit of performance boost but reduces the precision to the second instead of microsecond + * Added possibility to skip some extra stack frames in IntrospectionProcessor if you have some library wrapping Monolog that is always adding frames + * Added `Logger->withName` to clone a logger (keeping all handlers) with a new name + * Added FluentdFormatter for the Fluentd unix socket protocol + * Added HandlerWrapper base class to ease the creation of handler wrappers, just extend it and override as needed + * Added support for replacing context sub-keys using `%context.*%` in LineFormatter + * Added support for `payload` context value in RollbarHandler + * Added setRelease to RavenHandler to describe the application version, sent with every log + * Added support for `fingerprint` context value in RavenHandler + * Fixed JSON encoding errors that would gobble up the whole log record, we now handle those more gracefully by dropping chars as needed + * Fixed write timeouts in SocketHandler and derivatives, set to 10sec by default, lower it with `setWritingTimeout()` + * Fixed PHP7 compatibility with regard to Exception/Throwable handling in a few places + +### 1.17.2 (2015-10-14) + + * Fixed ErrorHandler compatibility with non-Monolog PSR-3 loggers + * Fixed SlackHandler handling to use slack functionalities better + * Fixed SwiftMailerHandler bug when sending multiple emails they all had the same id + * Fixed 5.3 compatibility regression + +### 1.17.1 (2015-08-31) + + * Fixed RollbarHandler triggering PHP notices + +### 1.17.0 (2015-08-30) + + * Added support for `checksum` and `release` context/extra values in RavenHandler + * Added better support for exceptions in RollbarHandler + * Added UidProcessor::getUid + * Added support for showing the resource type in NormalizedFormatter + * Fixed IntrospectionProcessor triggering PHP notices + +### 1.16.0 (2015-08-09) + + * Added IFTTTHandler to notify ifttt.com triggers + * Added Logger::setHandlers() to allow setting/replacing all handlers + * Added $capSize in RedisHandler to cap the log size + * Fixed StreamHandler creation of directory to only trigger when the first log write happens + * Fixed bug in the handling of curl failures + * Fixed duplicate logging of fatal errors when both error and fatal error handlers are registered in monolog's ErrorHandler + * Fixed missing fatal errors records with handlers that need to be closed to flush log records + * Fixed TagProcessor::addTags support for associative arrays + +### 1.15.0 (2015-07-12) + + * Added addTags and setTags methods to change a TagProcessor + * Added automatic creation of directories if they are missing for a StreamHandler to open a log file + * Added retry functionality to Loggly, Cube and Mandrill handlers so they retry up to 5 times in case of network failure + * Fixed process exit code being incorrectly reset to 0 if ErrorHandler::registerExceptionHandler was used + * Fixed HTML/JS escaping in BrowserConsoleHandler + * Fixed JSON encoding errors being silently suppressed (PHP 5.5+ only) + +### 1.14.0 (2015-06-19) + + * Added PHPConsoleHandler to send record to Chrome's PHP Console extension and library + * Added support for objects implementing __toString in the NormalizerFormatter + * Added support for HipChat's v2 API in HipChatHandler + * Added Logger::setTimezone() to initialize the timezone monolog should use in case date.timezone isn't correct for your app + * Added an option to send formatted message instead of the raw record on PushoverHandler via ->useFormattedMessage(true) + * Fixed curl errors being silently suppressed + +### 1.13.1 (2015-03-09) + + * Fixed regression in HipChat requiring a new token to be created + +### 1.13.0 (2015-03-05) + + * Added Registry::hasLogger to check for the presence of a logger instance + * Added context.user support to RavenHandler + * Added HipChat API v2 support in the HipChatHandler + * Added NativeMailerHandler::addParameter to pass params to the mail() process + * Added context data to SlackHandler when $includeContextAndExtra is true + * Added ability to customize the Swift_Message per-email in SwiftMailerHandler + * Fixed SwiftMailerHandler to lazily create message instances if a callback is provided + * Fixed serialization of INF and NaN values in Normalizer and LineFormatter + +### 1.12.0 (2014-12-29) + + * Break: HandlerInterface::isHandling now receives a partial record containing only a level key. This was always the intent and does not break any Monolog handler but is strictly speaking a BC break and you should check if you relied on any other field in your own handlers. + * Added PsrHandler to forward records to another PSR-3 logger + * Added SamplingHandler to wrap around a handler and include only every Nth record + * Added MongoDBFormatter to support better storage with MongoDBHandler (it must be enabled manually for now) + * Added exception codes in the output of most formatters + * Added LineFormatter::includeStacktraces to enable exception stack traces in logs (uses more than one line) + * Added $useShortAttachment to SlackHandler to minify attachment size and $includeExtra to append extra data + * Added $host to HipChatHandler for users of private instances + * Added $transactionName to NewRelicHandler and support for a transaction_name context value + * Fixed MandrillHandler to avoid outputing API call responses + * Fixed some non-standard behaviors in SyslogUdpHandler + +### 1.11.0 (2014-09-30) + + * Break: The NewRelicHandler extra and context data are now prefixed with extra_ and context_ to avoid clashes. Watch out if you have scripts reading those from the API and rely on names + * Added WhatFailureGroupHandler to suppress any exception coming from the wrapped handlers and avoid chain failures if a logging service fails + * Added MandrillHandler to send emails via the Mandrillapp.com API + * Added SlackHandler to log records to a Slack.com account + * Added FleepHookHandler to log records to a Fleep.io account + * Added LogglyHandler::addTag to allow adding tags to an existing handler + * Added $ignoreEmptyContextAndExtra to LineFormatter to avoid empty [] at the end + * Added $useLocking to StreamHandler and RotatingFileHandler to enable flock() while writing + * Added support for PhpAmqpLib in the AmqpHandler + * Added FingersCrossedHandler::clear and BufferHandler::clear to reset them between batches in long running jobs + * Added support for adding extra fields from $_SERVER in the WebProcessor + * Fixed support for non-string values in PrsLogMessageProcessor + * Fixed SwiftMailer messages being sent with the wrong date in long running scripts + * Fixed minor PHP 5.6 compatibility issues + * Fixed BufferHandler::close being called twice + +### 1.10.0 (2014-06-04) + + * Added Logger::getHandlers() and Logger::getProcessors() methods + * Added $passthruLevel argument to FingersCrossedHandler to let it always pass some records through even if the trigger level is not reached + * Added support for extra data in NewRelicHandler + * Added $expandNewlines flag to the ErrorLogHandler to create multiple log entries when a message has multiple lines + +### 1.9.1 (2014-04-24) + + * Fixed regression in RotatingFileHandler file permissions + * Fixed initialization of the BufferHandler to make sure it gets flushed after receiving records + * Fixed ChromePHPHandler and FirePHPHandler's activation strategies to be more conservative + +### 1.9.0 (2014-04-20) + + * Added LogEntriesHandler to send logs to a LogEntries account + * Added $filePermissions to tweak file mode on StreamHandler and RotatingFileHandler + * Added $useFormatting flag to MemoryProcessor to make it send raw data in bytes + * Added support for table formatting in FirePHPHandler via the table context key + * Added a TagProcessor to add tags to records, and support for tags in RavenHandler + * Added $appendNewline flag to the JsonFormatter to enable using it when logging to files + * Added sound support to the PushoverHandler + * Fixed multi-threading support in StreamHandler + * Fixed empty headers issue when ChromePHPHandler received no records + * Fixed default format of the ErrorLogHandler + +### 1.8.0 (2014-03-23) + + * Break: the LineFormatter now strips newlines by default because this was a bug, set $allowInlineLineBreaks to true if you need them + * Added BrowserConsoleHandler to send logs to any browser's console via console.log() injection in the output + * Added FilterHandler to filter records and only allow those of a given list of levels through to the wrapped handler + * Added FlowdockHandler to send logs to a Flowdock account + * Added RollbarHandler to send logs to a Rollbar account + * Added HtmlFormatter to send prettier log emails with colors for each log level + * Added GitProcessor to add the current branch/commit to extra record data + * Added a Monolog\Registry class to allow easier global access to pre-configured loggers + * Added support for the new official graylog2/gelf-php lib for GelfHandler, upgrade if you can by replacing the mlehner/gelf-php requirement + * Added support for HHVM + * Added support for Loggly batch uploads + * Added support for tweaking the content type and encoding in NativeMailerHandler + * Added $skipClassesPartials to tweak the ignored classes in the IntrospectionProcessor + * Fixed batch request support in GelfHandler + +### 1.7.0 (2013-11-14) + + * Added ElasticSearchHandler to send logs to an Elastic Search server + * Added DynamoDbHandler and ScalarFormatter to send logs to Amazon's Dynamo DB + * Added SyslogUdpHandler to send logs to a remote syslogd server + * Added LogglyHandler to send logs to a Loggly account + * Added $level to IntrospectionProcessor so it only adds backtraces when needed + * Added $version to LogstashFormatter to allow using the new v1 Logstash format + * Added $appName to NewRelicHandler + * Added configuration of Pushover notification retries/expiry + * Added $maxColumnWidth to NativeMailerHandler to change the 70 chars default + * Added chainability to most setters for all handlers + * Fixed RavenHandler batch processing so it takes the message from the record with highest priority + * Fixed HipChatHandler batch processing so it sends all messages at once + * Fixed issues with eAccelerator + * Fixed and improved many small things + +### 1.6.0 (2013-07-29) + + * Added HipChatHandler to send logs to a HipChat chat room + * Added ErrorLogHandler to send logs to PHP's error_log function + * Added NewRelicHandler to send logs to NewRelic's service + * Added Monolog\ErrorHandler helper class to register a Logger as exception/error/fatal handler + * Added ChannelLevelActivationStrategy for the FingersCrossedHandler to customize levels by channel + * Added stack traces output when normalizing exceptions (json output & co) + * Added Monolog\Logger::API constant (currently 1) + * Added support for ChromePHP's v4.0 extension + * Added support for message priorities in PushoverHandler, see $highPriorityLevel and $emergencyLevel + * Added support for sending messages to multiple users at once with the PushoverHandler + * Fixed RavenHandler's support for batch sending of messages (when behind a Buffer or FingersCrossedHandler) + * Fixed normalization of Traversables with very large data sets, only the first 1000 items are shown now + * Fixed issue in RotatingFileHandler when an open_basedir restriction is active + * Fixed minor issues in RavenHandler and bumped the API to Raven 0.5.0 + * Fixed SyslogHandler issue when many were used concurrently with different facilities + +### 1.5.0 (2013-04-23) + + * Added ProcessIdProcessor to inject the PID in log records + * Added UidProcessor to inject a unique identifier to all log records of one request/run + * Added support for previous exceptions in the LineFormatter exception serialization + * Added Monolog\Logger::getLevels() to get all available levels + * Fixed ChromePHPHandler so it avoids sending headers larger than Chrome can handle + +### 1.4.1 (2013-04-01) + + * Fixed exception formatting in the LineFormatter to be more minimalistic + * Fixed RavenHandler's handling of context/extra data, requires Raven client >0.1.0 + * Fixed log rotation in RotatingFileHandler to work with long running scripts spanning multiple days + * Fixed WebProcessor array access so it checks for data presence + * Fixed Buffer, Group and FingersCrossed handlers to make use of their processors + +### 1.4.0 (2013-02-13) + + * Added RedisHandler to log to Redis via the Predis library or the phpredis extension + * Added ZendMonitorHandler to log to the Zend Server monitor + * Added the possibility to pass arrays of handlers and processors directly in the Logger constructor + * Added `$useSSL` option to the PushoverHandler which is enabled by default + * Fixed ChromePHPHandler and FirePHPHandler issue when multiple instances are used simultaneously + * Fixed header injection capability in the NativeMailHandler + +### 1.3.1 (2013-01-11) + + * Fixed LogstashFormatter to be usable with stream handlers + * Fixed GelfMessageFormatter levels on Windows + +### 1.3.0 (2013-01-08) + + * Added PSR-3 compliance, the `Monolog\Logger` class is now an instance of `Psr\Log\LoggerInterface` + * Added PsrLogMessageProcessor that you can selectively enable for full PSR-3 compliance + * Added LogstashFormatter (combine with SocketHandler or StreamHandler to send logs to Logstash) + * Added PushoverHandler to send mobile notifications + * Added CouchDBHandler and DoctrineCouchDBHandler + * Added RavenHandler to send data to Sentry servers + * Added support for the new MongoClient class in MongoDBHandler + * Added microsecond precision to log records' timestamps + * Added `$flushOnOverflow` param to BufferHandler to flush by batches instead of losing + the oldest entries + * Fixed normalization of objects with cyclic references + +### 1.2.1 (2012-08-29) + + * Added new $logopts arg to SyslogHandler to provide custom openlog options + * Fixed fatal error in SyslogHandler + +### 1.2.0 (2012-08-18) + + * Added AmqpHandler (for use with AMQP servers) + * Added CubeHandler + * Added NativeMailerHandler::addHeader() to send custom headers in mails + * Added the possibility to specify more than one recipient in NativeMailerHandler + * Added the possibility to specify float timeouts in SocketHandler + * Added NOTICE and EMERGENCY levels to conform with RFC 5424 + * Fixed the log records to use the php default timezone instead of UTC + * Fixed BufferHandler not being flushed properly on PHP fatal errors + * Fixed normalization of exotic resource types + * Fixed the default format of the SyslogHandler to avoid duplicating datetimes in syslog + +### 1.1.0 (2012-04-23) + + * Added Monolog\Logger::isHandling() to check if a handler will + handle the given log level + * Added ChromePHPHandler + * Added MongoDBHandler + * Added GelfHandler (for use with Graylog2 servers) + * Added SocketHandler (for use with syslog-ng for example) + * Added NormalizerFormatter + * Added the possibility to change the activation strategy of the FingersCrossedHandler + * Added possibility to show microseconds in logs + * Added `server` and `referer` to WebProcessor output + +### 1.0.2 (2011-10-24) + + * Fixed bug in IE with large response headers and FirePHPHandler + +### 1.0.1 (2011-08-25) + + * Added MemoryPeakUsageProcessor and MemoryUsageProcessor + * Added Monolog\Logger::getName() to get a logger's channel name + +### 1.0.0 (2011-07-06) + + * Added IntrospectionProcessor to get info from where the logger was called + * Fixed WebProcessor in CLI + +### 1.0.0-RC1 (2011-07-01) + + * Initial release diff --git a/vendor/monolog/monolog/LICENSE b/vendor/monolog/monolog/LICENSE new file mode 100644 index 00000000..b5c6644a --- /dev/null +++ b/vendor/monolog/monolog/LICENSE @@ -0,0 +1,19 @@ +Copyright (c) 2011-2016 Jordi Boggiano + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is furnished +to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +THE SOFTWARE. diff --git a/vendor/monolog/monolog/README.md b/vendor/monolog/monolog/README.md new file mode 100644 index 00000000..1c1a79da --- /dev/null +++ b/vendor/monolog/monolog/README.md @@ -0,0 +1,94 @@ +# Monolog - Logging for PHP [![Build Status](https://img.shields.io/travis/Seldaek/monolog.svg)](https://travis-ci.org/Seldaek/monolog) + +[![Total Downloads](https://img.shields.io/packagist/dt/monolog/monolog.svg)](https://packagist.org/packages/monolog/monolog) +[![Latest Stable Version](https://img.shields.io/packagist/v/monolog/monolog.svg)](https://packagist.org/packages/monolog/monolog) + + +Monolog sends your logs to files, sockets, inboxes, databases and various +web services. See the complete list of handlers below. Special handlers +allow you to build advanced logging strategies. + +This library implements the [PSR-3](https://github.com/php-fig/fig-standards/blob/master/accepted/PSR-3-logger-interface.md) +interface that you can type-hint against in your own libraries to keep +a maximum of interoperability. You can also use it in your applications to +make sure you can always use another compatible logger at a later time. +As of 1.11.0 Monolog public APIs will also accept PSR-3 log levels. +Internally Monolog still uses its own level scheme since it predates PSR-3. + +## Installation + +Install the latest version with + +```bash +$ composer require monolog/monolog +``` + +## Basic Usage + +```php +pushHandler(new StreamHandler('path/to/your.log', Logger::WARNING)); + +// add records to the log +$log->addWarning('Foo'); +$log->addError('Bar'); +``` + +## Documentation + +- [Usage Instructions](doc/01-usage.md) +- [Handlers, Formatters and Processors](doc/02-handlers-formatters-processors.md) +- [Utility classes](doc/03-utilities.md) +- [Extending Monolog](doc/04-extending.md) + +## Third Party Packages + +Third party handlers, formatters and processors are +[listed in the wiki](https://github.com/Seldaek/monolog/wiki/Third-Party-Packages). You +can also add your own there if you publish one. + +## About + +### Requirements + +- Monolog works with PHP 5.3 or above, and is also tested to work with HHVM. + +### Submitting bugs and feature requests + +Bugs and feature request are tracked on [GitHub](https://github.com/Seldaek/monolog/issues) + +### Framework Integrations + +- Frameworks and libraries using [PSR-3](https://github.com/php-fig/fig-standards/blob/master/accepted/PSR-3-logger-interface.md) + can be used very easily with Monolog since it implements the interface. +- [Symfony2](http://symfony.com) comes out of the box with Monolog. +- [Silex](http://silex.sensiolabs.org/) comes out of the box with Monolog. +- [Laravel 4 & 5](http://laravel.com/) come out of the box with Monolog. +- [Lumen](http://lumen.laravel.com/) comes out of the box with Monolog. +- [PPI](http://www.ppi.io/) comes out of the box with Monolog. +- [CakePHP](http://cakephp.org/) is usable with Monolog via the [cakephp-monolog](https://github.com/jadb/cakephp-monolog) plugin. +- [Slim](http://www.slimframework.com/) is usable with Monolog via the [Slim-Monolog](https://github.com/Flynsarmy/Slim-Monolog) log writer. +- [XOOPS 2.6](http://xoops.org/) comes out of the box with Monolog. +- [Aura.Web_Project](https://github.com/auraphp/Aura.Web_Project) comes out of the box with Monolog. +- [Nette Framework](http://nette.org/en/) can be used with Monolog via [Kdyby/Monolog](https://github.com/Kdyby/Monolog) extension. +- [Proton Micro Framework](https://github.com/alexbilbie/Proton) comes out of the box with Monolog. + +### Author + +Jordi Boggiano - -
+See also the list of [contributors](https://github.com/Seldaek/monolog/contributors) which participated in this project. + +### License + +Monolog is licensed under the MIT License - see the `LICENSE` file for details + +### Acknowledgements + +This library is heavily inspired by Python's [Logbook](https://logbook.readthedocs.io/en/stable/) +library, although most concepts have been adjusted to fit to the PHP world. diff --git a/vendor/monolog/monolog/composer.json b/vendor/monolog/monolog/composer.json new file mode 100644 index 00000000..db7928cc --- /dev/null +++ b/vendor/monolog/monolog/composer.json @@ -0,0 +1,66 @@ +{ + "name": "monolog/monolog", + "description": "Sends your logs to files, sockets, inboxes, databases and various web services", + "keywords": ["log", "logging", "psr-3"], + "homepage": "http://github.com/Seldaek/monolog", + "type": "library", + "license": "MIT", + "authors": [ + { + "name": "Jordi Boggiano", + "email": "j.boggiano@seld.be", + "homepage": "http://seld.be" + } + ], + "require": { + "php": ">=5.3.0", + "psr/log": "~1.0" + }, + "require-dev": { + "phpunit/phpunit": "~4.5", + "graylog2/gelf-php": "~1.0", + "sentry/sentry": "^0.13", + "ruflin/elastica": ">=0.90 <3.0", + "doctrine/couchdb": "~1.0@dev", + "aws/aws-sdk-php": "^2.4.9 || ^3.0", + "php-amqplib/php-amqplib": "~2.4", + "swiftmailer/swiftmailer": "^5.3|^6.0", + "php-console/php-console": "^3.1.3", + "phpunit/phpunit-mock-objects": "2.3.0", + "jakub-onderka/php-parallel-lint": "0.9" + }, + "_": "phpunit/phpunit-mock-objects required in 2.3.0 due to https://github.com/sebastianbergmann/phpunit-mock-objects/issues/223 - needs hhvm 3.8+ on travis", + "suggest": { + "graylog2/gelf-php": "Allow sending log messages to a GrayLog2 server", + "sentry/sentry": "Allow sending log messages to a Sentry server", + "doctrine/couchdb": "Allow sending log messages to a CouchDB server", + "ruflin/elastica": "Allow sending log messages to an Elastic Search server", + "php-amqplib/php-amqplib": "Allow sending log messages to an AMQP server using php-amqplib", + "ext-amqp": "Allow sending log messages to an AMQP server (1.0+ required)", + "ext-mongo": "Allow sending log messages to a MongoDB server", + "mongodb/mongodb": "Allow sending log messages to a MongoDB server via PHP Driver", + "aws/aws-sdk-php": "Allow sending log messages to AWS services like DynamoDB", + "rollbar/rollbar": "Allow sending log messages to Rollbar", + "php-console/php-console": "Allow sending log messages to Google Chrome" + }, + "autoload": { + "psr-4": {"Monolog\\": "src/Monolog"} + }, + "autoload-dev": { + "psr-4": {"Monolog\\": "tests/Monolog"} + }, + "provide": { + "psr/log-implementation": "1.0.0" + }, + "extra": { + "branch-alias": { + "dev-master": "2.0.x-dev" + } + }, + "scripts": { + "test": [ + "parallel-lint . --exclude vendor --exclude src/Monolog/Handler/FormattableHandlerInterface.php --exclude src/Monolog/Handler/FormattableHandlerTrait.php --exclude src/Monolog/Handler/ProcessableHandlerInterface.php --exclude src/Monolog/Handler/ProcessableHandlerTrait.php", + "phpunit" + ] + } +} diff --git a/vendor/monolog/monolog/src/Monolog/ErrorHandler.php b/vendor/monolog/monolog/src/Monolog/ErrorHandler.php new file mode 100644 index 00000000..5b087c52 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/ErrorHandler.php @@ -0,0 +1,239 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog; + +use Psr\Log\LoggerInterface; +use Psr\Log\LogLevel; +use Monolog\Handler\AbstractHandler; +use Monolog\Registry; + +/** + * Monolog error handler + * + * A facility to enable logging of runtime errors, exceptions and fatal errors. + * + * Quick setup: ErrorHandler::register($logger); + * + * @author Jordi Boggiano + */ +class ErrorHandler +{ + private $logger; + + private $previousExceptionHandler; + private $uncaughtExceptionLevel; + + private $previousErrorHandler; + private $errorLevelMap; + private $handleOnlyReportedErrors; + + private $hasFatalErrorHandler; + private $fatalLevel; + private $reservedMemory; + private $lastFatalTrace; + private static $fatalErrors = array(E_ERROR, E_PARSE, E_CORE_ERROR, E_COMPILE_ERROR, E_USER_ERROR); + + public function __construct(LoggerInterface $logger) + { + $this->logger = $logger; + } + + /** + * Registers a new ErrorHandler for a given Logger + * + * By default it will handle errors, exceptions and fatal errors + * + * @param LoggerInterface $logger + * @param array|false $errorLevelMap an array of E_* constant to LogLevel::* constant mapping, or false to disable error handling + * @param int|false $exceptionLevel a LogLevel::* constant, or false to disable exception handling + * @param int|false $fatalLevel a LogLevel::* constant, or false to disable fatal error handling + * @return ErrorHandler + */ + public static function register(LoggerInterface $logger, $errorLevelMap = array(), $exceptionLevel = null, $fatalLevel = null) + { + //Forces the autoloader to run for LogLevel. Fixes an autoload issue at compile-time on PHP5.3. See https://github.com/Seldaek/monolog/pull/929 + class_exists('\\Psr\\Log\\LogLevel', true); + + $handler = new static($logger); + if ($errorLevelMap !== false) { + $handler->registerErrorHandler($errorLevelMap); + } + if ($exceptionLevel !== false) { + $handler->registerExceptionHandler($exceptionLevel); + } + if ($fatalLevel !== false) { + $handler->registerFatalHandler($fatalLevel); + } + + return $handler; + } + + public function registerExceptionHandler($level = null, $callPrevious = true) + { + $prev = set_exception_handler(array($this, 'handleException')); + $this->uncaughtExceptionLevel = $level; + if ($callPrevious && $prev) { + $this->previousExceptionHandler = $prev; + } + } + + public function registerErrorHandler(array $levelMap = array(), $callPrevious = true, $errorTypes = -1, $handleOnlyReportedErrors = true) + { + $prev = set_error_handler(array($this, 'handleError'), $errorTypes); + $this->errorLevelMap = array_replace($this->defaultErrorLevelMap(), $levelMap); + if ($callPrevious) { + $this->previousErrorHandler = $prev ?: true; + } + + $this->handleOnlyReportedErrors = $handleOnlyReportedErrors; + } + + public function registerFatalHandler($level = null, $reservedMemorySize = 20) + { + register_shutdown_function(array($this, 'handleFatalError')); + + $this->reservedMemory = str_repeat(' ', 1024 * $reservedMemorySize); + $this->fatalLevel = $level; + $this->hasFatalErrorHandler = true; + } + + protected function defaultErrorLevelMap() + { + return array( + E_ERROR => LogLevel::CRITICAL, + E_WARNING => LogLevel::WARNING, + E_PARSE => LogLevel::ALERT, + E_NOTICE => LogLevel::NOTICE, + E_CORE_ERROR => LogLevel::CRITICAL, + E_CORE_WARNING => LogLevel::WARNING, + E_COMPILE_ERROR => LogLevel::ALERT, + E_COMPILE_WARNING => LogLevel::WARNING, + E_USER_ERROR => LogLevel::ERROR, + E_USER_WARNING => LogLevel::WARNING, + E_USER_NOTICE => LogLevel::NOTICE, + E_STRICT => LogLevel::NOTICE, + E_RECOVERABLE_ERROR => LogLevel::ERROR, + E_DEPRECATED => LogLevel::NOTICE, + E_USER_DEPRECATED => LogLevel::NOTICE, + ); + } + + /** + * @private + */ + public function handleException($e) + { + $this->logger->log( + $this->uncaughtExceptionLevel === null ? LogLevel::ERROR : $this->uncaughtExceptionLevel, + sprintf('Uncaught Exception %s: "%s" at %s line %s', Utils::getClass($e), $e->getMessage(), $e->getFile(), $e->getLine()), + array('exception' => $e) + ); + + if ($this->previousExceptionHandler) { + call_user_func($this->previousExceptionHandler, $e); + } + + exit(255); + } + + /** + * @private + */ + public function handleError($code, $message, $file = '', $line = 0, $context = array()) + { + if ($this->handleOnlyReportedErrors && !(error_reporting() & $code)) { + return; + } + + // fatal error codes are ignored if a fatal error handler is present as well to avoid duplicate log entries + if (!$this->hasFatalErrorHandler || !in_array($code, self::$fatalErrors, true)) { + $level = isset($this->errorLevelMap[$code]) ? $this->errorLevelMap[$code] : LogLevel::CRITICAL; + $this->logger->log($level, self::codeToString($code).': '.$message, array('code' => $code, 'message' => $message, 'file' => $file, 'line' => $line)); + } else { + // http://php.net/manual/en/function.debug-backtrace.php + // As of 5.3.6, DEBUG_BACKTRACE_IGNORE_ARGS option was added. + // Any version less than 5.3.6 must use the DEBUG_BACKTRACE_IGNORE_ARGS constant value '2'. + $trace = debug_backtrace((PHP_VERSION_ID < 50306) ? 2 : DEBUG_BACKTRACE_IGNORE_ARGS); + array_shift($trace); // Exclude handleError from trace + $this->lastFatalTrace = $trace; + } + + if ($this->previousErrorHandler === true) { + return false; + } elseif ($this->previousErrorHandler) { + return call_user_func($this->previousErrorHandler, $code, $message, $file, $line, $context); + } + } + + /** + * @private + */ + public function handleFatalError() + { + $this->reservedMemory = null; + + $lastError = error_get_last(); + if ($lastError && in_array($lastError['type'], self::$fatalErrors, true)) { + $this->logger->log( + $this->fatalLevel === null ? LogLevel::ALERT : $this->fatalLevel, + 'Fatal Error ('.self::codeToString($lastError['type']).'): '.$lastError['message'], + array('code' => $lastError['type'], 'message' => $lastError['message'], 'file' => $lastError['file'], 'line' => $lastError['line'], 'trace' => $this->lastFatalTrace) + ); + + if ($this->logger instanceof Logger) { + foreach ($this->logger->getHandlers() as $handler) { + if ($handler instanceof AbstractHandler) { + $handler->close(); + } + } + } + } + } + + private static function codeToString($code) + { + switch ($code) { + case E_ERROR: + return 'E_ERROR'; + case E_WARNING: + return 'E_WARNING'; + case E_PARSE: + return 'E_PARSE'; + case E_NOTICE: + return 'E_NOTICE'; + case E_CORE_ERROR: + return 'E_CORE_ERROR'; + case E_CORE_WARNING: + return 'E_CORE_WARNING'; + case E_COMPILE_ERROR: + return 'E_COMPILE_ERROR'; + case E_COMPILE_WARNING: + return 'E_COMPILE_WARNING'; + case E_USER_ERROR: + return 'E_USER_ERROR'; + case E_USER_WARNING: + return 'E_USER_WARNING'; + case E_USER_NOTICE: + return 'E_USER_NOTICE'; + case E_STRICT: + return 'E_STRICT'; + case E_RECOVERABLE_ERROR: + return 'E_RECOVERABLE_ERROR'; + case E_DEPRECATED: + return 'E_DEPRECATED'; + case E_USER_DEPRECATED: + return 'E_USER_DEPRECATED'; + } + + return 'Unknown PHP error'; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Formatter/ChromePHPFormatter.php b/vendor/monolog/monolog/src/Monolog/Formatter/ChromePHPFormatter.php new file mode 100644 index 00000000..feef1903 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Formatter/ChromePHPFormatter.php @@ -0,0 +1,78 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Formatter; + +use Monolog\Logger; + +/** + * Formats a log message according to the ChromePHP array format + * + * @author Christophe Coevoet + */ +class ChromePHPFormatter implements FormatterInterface +{ + /** + * Translates Monolog log levels to Wildfire levels. + */ + private $logLevels = array( + Logger::DEBUG => 'log', + Logger::INFO => 'info', + Logger::NOTICE => 'info', + Logger::WARNING => 'warn', + Logger::ERROR => 'error', + Logger::CRITICAL => 'error', + Logger::ALERT => 'error', + Logger::EMERGENCY => 'error', + ); + + /** + * {@inheritdoc} + */ + public function format(array $record) + { + // Retrieve the line and file if set and remove them from the formatted extra + $backtrace = 'unknown'; + if (isset($record['extra']['file'], $record['extra']['line'])) { + $backtrace = $record['extra']['file'].' : '.$record['extra']['line']; + unset($record['extra']['file'], $record['extra']['line']); + } + + $message = array('message' => $record['message']); + if ($record['context']) { + $message['context'] = $record['context']; + } + if ($record['extra']) { + $message['extra'] = $record['extra']; + } + if (count($message) === 1) { + $message = reset($message); + } + + return array( + $record['channel'], + $message, + $backtrace, + $this->logLevels[$record['level']], + ); + } + + public function formatBatch(array $records) + { + $formatted = array(); + + foreach ($records as $record) { + $formatted[] = $this->format($record); + } + + return $formatted; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Formatter/ElasticaFormatter.php b/vendor/monolog/monolog/src/Monolog/Formatter/ElasticaFormatter.php new file mode 100644 index 00000000..732c4347 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Formatter/ElasticaFormatter.php @@ -0,0 +1,89 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Formatter; + +use Elastica\Document; + +/** + * Format a log message into an Elastica Document + * + * @author Jelle Vink + */ +class ElasticaFormatter extends NormalizerFormatter +{ + /** + * @var string Elastic search index name + */ + protected $index; + + /** + * @var string Elastic search document type + */ + protected $type; + + /** + * @param string $index Elastic Search index name + * @param string $type Elastic Search document type + */ + public function __construct($index, $type) + { + // elasticsearch requires a ISO 8601 format date with optional millisecond precision. + parent::__construct('Y-m-d\TH:i:s.uP'); + + $this->index = $index; + $this->type = $type; + } + + /** + * {@inheritdoc} + */ + public function format(array $record) + { + $record = parent::format($record); + + return $this->getDocument($record); + } + + /** + * Getter index + * @return string + */ + public function getIndex() + { + return $this->index; + } + + /** + * Getter type + * @return string + */ + public function getType() + { + return $this->type; + } + + /** + * Convert a log message into an Elastica Document + * + * @param array $record Log message + * @return Document + */ + protected function getDocument($record) + { + $document = new Document(); + $document->setData($record); + $document->setType($this->type); + $document->setIndex($this->index); + + return $document; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Formatter/FlowdockFormatter.php b/vendor/monolog/monolog/src/Monolog/Formatter/FlowdockFormatter.php new file mode 100644 index 00000000..79ef79ee --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Formatter/FlowdockFormatter.php @@ -0,0 +1,116 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Formatter; + +/** + * formats the record to be used in the FlowdockHandler + * + * @author Dominik Liebler + */ +class FlowdockFormatter implements FormatterInterface +{ + /** + * @var string + */ + private $source; + + /** + * @var string + */ + private $sourceEmail; + + /** + * @param string $source + * @param string $sourceEmail + */ + public function __construct($source, $sourceEmail) + { + $this->source = $source; + $this->sourceEmail = $sourceEmail; + } + + /** + * {@inheritdoc} + */ + public function format(array $record) + { + $tags = array( + '#logs', + '#' . strtolower($record['level_name']), + '#' . $record['channel'], + ); + + foreach ($record['extra'] as $value) { + $tags[] = '#' . $value; + } + + $subject = sprintf( + 'in %s: %s - %s', + $this->source, + $record['level_name'], + $this->getShortMessage($record['message']) + ); + + $record['flowdock'] = array( + 'source' => $this->source, + 'from_address' => $this->sourceEmail, + 'subject' => $subject, + 'content' => $record['message'], + 'tags' => $tags, + 'project' => $this->source, + ); + + return $record; + } + + /** + * {@inheritdoc} + */ + public function formatBatch(array $records) + { + $formatted = array(); + + foreach ($records as $record) { + $formatted[] = $this->format($record); + } + + return $formatted; + } + + /** + * @param string $message + * + * @return string + */ + public function getShortMessage($message) + { + static $hasMbString; + + if (null === $hasMbString) { + $hasMbString = function_exists('mb_strlen'); + } + + $maxLength = 45; + + if ($hasMbString) { + if (mb_strlen($message, 'UTF-8') > $maxLength) { + $message = mb_substr($message, 0, $maxLength - 4, 'UTF-8') . ' ...'; + } + } else { + if (strlen($message) > $maxLength) { + $message = substr($message, 0, $maxLength - 4) . ' ...'; + } + } + + return $message; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Formatter/FluentdFormatter.php b/vendor/monolog/monolog/src/Monolog/Formatter/FluentdFormatter.php new file mode 100644 index 00000000..cd578786 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Formatter/FluentdFormatter.php @@ -0,0 +1,88 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Formatter; + +use Monolog\Utils; + +/** + * Class FluentdFormatter + * + * Serializes a log message to Fluentd unix socket protocol + * + * Fluentd config: + * + * + * type unix + * path /var/run/td-agent/td-agent.sock + * + * + * Monolog setup: + * + * $logger = new Monolog\Logger('fluent.tag'); + * $fluentHandler = new Monolog\Handler\SocketHandler('unix:///var/run/td-agent/td-agent.sock'); + * $fluentHandler->setFormatter(new Monolog\Formatter\FluentdFormatter()); + * $logger->pushHandler($fluentHandler); + * + * @author Andrius Putna + */ +class FluentdFormatter implements FormatterInterface +{ + /** + * @var bool $levelTag should message level be a part of the fluentd tag + */ + protected $levelTag = false; + + public function __construct($levelTag = false) + { + if (!function_exists('json_encode')) { + throw new \RuntimeException('PHP\'s json extension is required to use Monolog\'s FluentdUnixFormatter'); + } + + $this->levelTag = (bool) $levelTag; + } + + public function isUsingLevelsInTag() + { + return $this->levelTag; + } + + public function format(array $record) + { + $tag = $record['channel']; + if ($this->levelTag) { + $tag .= '.' . strtolower($record['level_name']); + } + + $message = array( + 'message' => $record['message'], + 'context' => $record['context'], + 'extra' => $record['extra'], + ); + + if (!$this->levelTag) { + $message['level'] = $record['level']; + $message['level_name'] = $record['level_name']; + } + + return Utils::jsonEncode(array($tag, $record['datetime']->getTimestamp(), $message)); + } + + public function formatBatch(array $records) + { + $message = ''; + foreach ($records as $record) { + $message .= $this->format($record); + } + + return $message; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Formatter/FormatterInterface.php b/vendor/monolog/monolog/src/Monolog/Formatter/FormatterInterface.php new file mode 100644 index 00000000..b95ee8e6 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Formatter/FormatterInterface.php @@ -0,0 +1,36 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Formatter; + +/** + * Interface for formatters + * + * @author Jordi Boggiano + */ +interface FormatterInterface +{ + /** + * Formats a log record. + * + * @param array $record A record to format + * @return mixed The formatted record + */ + public function format(array $record); + + /** + * Formats a set of log records. + * + * @param array $records A set of records to format + * @return mixed The formatted set of records + */ + public function formatBatch(array $records); +} diff --git a/vendor/monolog/monolog/src/Monolog/Formatter/GelfMessageFormatter.php b/vendor/monolog/monolog/src/Monolog/Formatter/GelfMessageFormatter.php new file mode 100644 index 00000000..c58424a8 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Formatter/GelfMessageFormatter.php @@ -0,0 +1,138 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Formatter; + +use Monolog\Logger; +use Gelf\Message; + +/** + * Serializes a log message to GELF + * @see http://www.graylog2.org/about/gelf + * + * @author Matt Lehner + */ +class GelfMessageFormatter extends NormalizerFormatter +{ + const DEFAULT_MAX_LENGTH = 32766; + + /** + * @var string the name of the system for the Gelf log message + */ + protected $systemName; + + /** + * @var string a prefix for 'extra' fields from the Monolog record (optional) + */ + protected $extraPrefix; + + /** + * @var string a prefix for 'context' fields from the Monolog record (optional) + */ + protected $contextPrefix; + + /** + * @var int max length per field + */ + protected $maxLength; + + /** + * Translates Monolog log levels to Graylog2 log priorities. + */ + private $logLevels = array( + Logger::DEBUG => 7, + Logger::INFO => 6, + Logger::NOTICE => 5, + Logger::WARNING => 4, + Logger::ERROR => 3, + Logger::CRITICAL => 2, + Logger::ALERT => 1, + Logger::EMERGENCY => 0, + ); + + public function __construct($systemName = null, $extraPrefix = null, $contextPrefix = 'ctxt_', $maxLength = null) + { + parent::__construct('U.u'); + + $this->systemName = $systemName ?: gethostname(); + + $this->extraPrefix = $extraPrefix; + $this->contextPrefix = $contextPrefix; + $this->maxLength = is_null($maxLength) ? self::DEFAULT_MAX_LENGTH : $maxLength; + } + + /** + * {@inheritdoc} + */ + public function format(array $record) + { + $record = parent::format($record); + + if (!isset($record['datetime'], $record['message'], $record['level'])) { + throw new \InvalidArgumentException('The record should at least contain datetime, message and level keys, '.var_export($record, true).' given'); + } + + $message = new Message(); + $message + ->setTimestamp($record['datetime']) + ->setShortMessage((string) $record['message']) + ->setHost($this->systemName) + ->setLevel($this->logLevels[$record['level']]); + + // message length + system name length + 200 for padding / metadata + $len = 200 + strlen((string) $record['message']) + strlen($this->systemName); + + if ($len > $this->maxLength) { + $message->setShortMessage(substr($record['message'], 0, $this->maxLength)); + } + + if (isset($record['channel'])) { + $message->setFacility($record['channel']); + } + if (isset($record['extra']['line'])) { + $message->setLine($record['extra']['line']); + unset($record['extra']['line']); + } + if (isset($record['extra']['file'])) { + $message->setFile($record['extra']['file']); + unset($record['extra']['file']); + } + + foreach ($record['extra'] as $key => $val) { + $val = is_scalar($val) || null === $val ? $val : $this->toJson($val); + $len = strlen($this->extraPrefix . $key . $val); + if ($len > $this->maxLength) { + $message->setAdditional($this->extraPrefix . $key, substr($val, 0, $this->maxLength)); + break; + } + $message->setAdditional($this->extraPrefix . $key, $val); + } + + foreach ($record['context'] as $key => $val) { + $val = is_scalar($val) || null === $val ? $val : $this->toJson($val); + $len = strlen($this->contextPrefix . $key . $val); + if ($len > $this->maxLength) { + $message->setAdditional($this->contextPrefix . $key, substr($val, 0, $this->maxLength)); + break; + } + $message->setAdditional($this->contextPrefix . $key, $val); + } + + if (null === $message->getFile() && isset($record['context']['exception']['file'])) { + if (preg_match("/^(.+):([0-9]+)$/", $record['context']['exception']['file'], $matches)) { + $message->setFile($matches[1]); + $message->setLine($matches[2]); + } + } + + return $message; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Formatter/HtmlFormatter.php b/vendor/monolog/monolog/src/Monolog/Formatter/HtmlFormatter.php new file mode 100644 index 00000000..c9ba7a07 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Formatter/HtmlFormatter.php @@ -0,0 +1,142 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Formatter; + +use Monolog\Logger; +use Monolog\Utils; + +/** + * Formats incoming records into an HTML table + * + * This is especially useful for html email logging + * + * @author Tiago Brito + */ +class HtmlFormatter extends NormalizerFormatter +{ + /** + * Translates Monolog log levels to html color priorities. + */ + protected $logLevels = array( + Logger::DEBUG => '#cccccc', + Logger::INFO => '#468847', + Logger::NOTICE => '#3a87ad', + Logger::WARNING => '#c09853', + Logger::ERROR => '#f0ad4e', + Logger::CRITICAL => '#FF7708', + Logger::ALERT => '#C12A19', + Logger::EMERGENCY => '#000000', + ); + + /** + * @param string $dateFormat The format of the timestamp: one supported by DateTime::format + */ + public function __construct($dateFormat = null) + { + parent::__construct($dateFormat); + } + + /** + * Creates an HTML table row + * + * @param string $th Row header content + * @param string $td Row standard cell content + * @param bool $escapeTd false if td content must not be html escaped + * @return string + */ + protected function addRow($th, $td = ' ', $escapeTd = true) + { + $th = htmlspecialchars($th, ENT_NOQUOTES, 'UTF-8'); + if ($escapeTd) { + $td = '
'.htmlspecialchars($td, ENT_NOQUOTES, 'UTF-8').'
'; + } + + return "\n$th:\n".$td."\n"; + } + + /** + * Create a HTML h1 tag + * + * @param string $title Text to be in the h1 + * @param int $level Error level + * @return string + */ + protected function addTitle($title, $level) + { + $title = htmlspecialchars($title, ENT_NOQUOTES, 'UTF-8'); + + return '

'.$title.'

'; + } + + /** + * Formats a log record. + * + * @param array $record A record to format + * @return mixed The formatted record + */ + public function format(array $record) + { + $output = $this->addTitle($record['level_name'], $record['level']); + $output .= ''; + + $output .= $this->addRow('Message', (string) $record['message']); + $output .= $this->addRow('Time', $record['datetime']->format($this->dateFormat)); + $output .= $this->addRow('Channel', $record['channel']); + if ($record['context']) { + $embeddedTable = '
'; + foreach ($record['context'] as $key => $value) { + $embeddedTable .= $this->addRow($key, $this->convertToString($value)); + } + $embeddedTable .= '
'; + $output .= $this->addRow('Context', $embeddedTable, false); + } + if ($record['extra']) { + $embeddedTable = ''; + foreach ($record['extra'] as $key => $value) { + $embeddedTable .= $this->addRow($key, $this->convertToString($value)); + } + $embeddedTable .= '
'; + $output .= $this->addRow('Extra', $embeddedTable, false); + } + + return $output.''; + } + + /** + * Formats a set of log records. + * + * @param array $records A set of records to format + * @return mixed The formatted set of records + */ + public function formatBatch(array $records) + { + $message = ''; + foreach ($records as $record) { + $message .= $this->format($record); + } + + return $message; + } + + protected function convertToString($data) + { + if (null === $data || is_scalar($data)) { + return (string) $data; + } + + $data = $this->normalize($data); + if (version_compare(PHP_VERSION, '5.4.0', '>=')) { + return Utils::jsonEncode($data, JSON_PRETTY_PRINT | JSON_UNESCAPED_SLASHES | JSON_UNESCAPED_UNICODE, true); + } + + return str_replace('\\/', '/', Utils::jsonEncode($data, null, true)); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Formatter/JsonFormatter.php b/vendor/monolog/monolog/src/Monolog/Formatter/JsonFormatter.php new file mode 100644 index 00000000..79a48833 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Formatter/JsonFormatter.php @@ -0,0 +1,212 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Formatter; + +use Exception; +use Monolog\Utils; +use Throwable; + +/** + * Encodes whatever record data is passed to it as json + * + * This can be useful to log to databases or remote APIs + * + * @author Jordi Boggiano + */ +class JsonFormatter extends NormalizerFormatter +{ + const BATCH_MODE_JSON = 1; + const BATCH_MODE_NEWLINES = 2; + + protected $batchMode; + protected $appendNewline; + + /** + * @var bool + */ + protected $includeStacktraces = false; + + /** + * @param int $batchMode + * @param bool $appendNewline + */ + public function __construct($batchMode = self::BATCH_MODE_JSON, $appendNewline = true) + { + $this->batchMode = $batchMode; + $this->appendNewline = $appendNewline; + } + + /** + * The batch mode option configures the formatting style for + * multiple records. By default, multiple records will be + * formatted as a JSON-encoded array. However, for + * compatibility with some API endpoints, alternative styles + * are available. + * + * @return int + */ + public function getBatchMode() + { + return $this->batchMode; + } + + /** + * True if newlines are appended to every formatted record + * + * @return bool + */ + public function isAppendingNewlines() + { + return $this->appendNewline; + } + + /** + * {@inheritdoc} + */ + public function format(array $record) + { + return $this->toJson($this->normalize($record), true) . ($this->appendNewline ? "\n" : ''); + } + + /** + * {@inheritdoc} + */ + public function formatBatch(array $records) + { + switch ($this->batchMode) { + case static::BATCH_MODE_NEWLINES: + return $this->formatBatchNewlines($records); + + case static::BATCH_MODE_JSON: + default: + return $this->formatBatchJson($records); + } + } + + /** + * @param bool $include + */ + public function includeStacktraces($include = true) + { + $this->includeStacktraces = $include; + } + + /** + * Return a JSON-encoded array of records. + * + * @param array $records + * @return string + */ + protected function formatBatchJson(array $records) + { + return $this->toJson($this->normalize($records), true); + } + + /** + * Use new lines to separate records instead of a + * JSON-encoded array. + * + * @param array $records + * @return string + */ + protected function formatBatchNewlines(array $records) + { + $instance = $this; + + $oldNewline = $this->appendNewline; + $this->appendNewline = false; + array_walk($records, function (&$value, $key) use ($instance) { + $value = $instance->format($value); + }); + $this->appendNewline = $oldNewline; + + return implode("\n", $records); + } + + /** + * Normalizes given $data. + * + * @param mixed $data + * + * @return mixed + */ + protected function normalize($data, $depth = 0) + { + if ($depth > 9) { + return 'Over 9 levels deep, aborting normalization'; + } + + if (is_array($data)) { + $normalized = array(); + + $count = 1; + foreach ($data as $key => $value) { + if ($count++ > 1000) { + $normalized['...'] = 'Over 1000 items ('.count($data).' total), aborting normalization'; + break; + } + + $normalized[$key] = $this->normalize($value, $depth+1); + } + + return $normalized; + } + + if ($data instanceof Exception || $data instanceof Throwable) { + return $this->normalizeException($data); + } + + if (is_resource($data)) { + return parent::normalize($data); + } + + return $data; + } + + /** + * Normalizes given exception with or without its own stack trace based on + * `includeStacktraces` property. + * + * @param Exception|Throwable $e + * + * @return array + */ + protected function normalizeException($e) + { + // TODO 2.0 only check for Throwable + if (!$e instanceof Exception && !$e instanceof Throwable) { + throw new \InvalidArgumentException('Exception/Throwable expected, got '.gettype($e).' / '.Utils::getClass($e)); + } + + $data = array( + 'class' => Utils::getClass($e), + 'message' => $e->getMessage(), + 'code' => (int) $e->getCode(), + 'file' => $e->getFile().':'.$e->getLine(), + ); + + if ($this->includeStacktraces) { + $trace = $e->getTrace(); + foreach ($trace as $frame) { + if (isset($frame['file'])) { + $data['trace'][] = $frame['file'].':'.$frame['line']; + } + } + } + + if ($previous = $e->getPrevious()) { + $data['previous'] = $this->normalizeException($previous); + } + + return $data; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Formatter/LineFormatter.php b/vendor/monolog/monolog/src/Monolog/Formatter/LineFormatter.php new file mode 100644 index 00000000..e84bdc83 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Formatter/LineFormatter.php @@ -0,0 +1,181 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Formatter; + +use Monolog\Utils; + +/** + * Formats incoming records into a one-line string + * + * This is especially useful for logging to files + * + * @author Jordi Boggiano + * @author Christophe Coevoet + */ +class LineFormatter extends NormalizerFormatter +{ + const SIMPLE_FORMAT = "[%datetime%] %channel%.%level_name%: %message% %context% %extra%\n"; + + protected $format; + protected $allowInlineLineBreaks; + protected $ignoreEmptyContextAndExtra; + protected $includeStacktraces; + + /** + * @param string $format The format of the message + * @param string $dateFormat The format of the timestamp: one supported by DateTime::format + * @param bool $allowInlineLineBreaks Whether to allow inline line breaks in log entries + * @param bool $ignoreEmptyContextAndExtra + */ + public function __construct($format = null, $dateFormat = null, $allowInlineLineBreaks = false, $ignoreEmptyContextAndExtra = false) + { + $this->format = $format ?: static::SIMPLE_FORMAT; + $this->allowInlineLineBreaks = $allowInlineLineBreaks; + $this->ignoreEmptyContextAndExtra = $ignoreEmptyContextAndExtra; + parent::__construct($dateFormat); + } + + public function includeStacktraces($include = true) + { + $this->includeStacktraces = $include; + if ($this->includeStacktraces) { + $this->allowInlineLineBreaks = true; + } + } + + public function allowInlineLineBreaks($allow = true) + { + $this->allowInlineLineBreaks = $allow; + } + + public function ignoreEmptyContextAndExtra($ignore = true) + { + $this->ignoreEmptyContextAndExtra = $ignore; + } + + /** + * {@inheritdoc} + */ + public function format(array $record) + { + $vars = parent::format($record); + + $output = $this->format; + + foreach ($vars['extra'] as $var => $val) { + if (false !== strpos($output, '%extra.'.$var.'%')) { + $output = str_replace('%extra.'.$var.'%', $this->stringify($val), $output); + unset($vars['extra'][$var]); + } + } + + + foreach ($vars['context'] as $var => $val) { + if (false !== strpos($output, '%context.'.$var.'%')) { + $output = str_replace('%context.'.$var.'%', $this->stringify($val), $output); + unset($vars['context'][$var]); + } + } + + if ($this->ignoreEmptyContextAndExtra) { + if (empty($vars['context'])) { + unset($vars['context']); + $output = str_replace('%context%', '', $output); + } + + if (empty($vars['extra'])) { + unset($vars['extra']); + $output = str_replace('%extra%', '', $output); + } + } + + foreach ($vars as $var => $val) { + if (false !== strpos($output, '%'.$var.'%')) { + $output = str_replace('%'.$var.'%', $this->stringify($val), $output); + } + } + + // remove leftover %extra.xxx% and %context.xxx% if any + if (false !== strpos($output, '%')) { + $output = preg_replace('/%(?:extra|context)\..+?%/', '', $output); + } + + return $output; + } + + public function formatBatch(array $records) + { + $message = ''; + foreach ($records as $record) { + $message .= $this->format($record); + } + + return $message; + } + + public function stringify($value) + { + return $this->replaceNewlines($this->convertToString($value)); + } + + protected function normalizeException($e) + { + // TODO 2.0 only check for Throwable + if (!$e instanceof \Exception && !$e instanceof \Throwable) { + throw new \InvalidArgumentException('Exception/Throwable expected, got '.gettype($e).' / '.Utils::getClass($e)); + } + + $previousText = ''; + if ($previous = $e->getPrevious()) { + do { + $previousText .= ', '.Utils::getClass($previous).'(code: '.$previous->getCode().'): '.$previous->getMessage().' at '.$previous->getFile().':'.$previous->getLine(); + } while ($previous = $previous->getPrevious()); + } + + $str = '[object] ('.Utils::getClass($e).'(code: '.$e->getCode().'): '.$e->getMessage().' at '.$e->getFile().':'.$e->getLine().$previousText.')'; + if ($this->includeStacktraces) { + $str .= "\n[stacktrace]\n".$e->getTraceAsString()."\n"; + } + + return $str; + } + + protected function convertToString($data) + { + if (null === $data || is_bool($data)) { + return var_export($data, true); + } + + if (is_scalar($data)) { + return (string) $data; + } + + if (version_compare(PHP_VERSION, '5.4.0', '>=')) { + return $this->toJson($data, true); + } + + return str_replace('\\/', '/', $this->toJson($data, true)); + } + + protected function replaceNewlines($str) + { + if ($this->allowInlineLineBreaks) { + if (0 === strpos($str, '{')) { + return str_replace(array('\r', '\n'), array("\r", "\n"), $str); + } + + return $str; + } + + return str_replace(array("\r\n", "\r", "\n"), ' ', $str); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Formatter/LogglyFormatter.php b/vendor/monolog/monolog/src/Monolog/Formatter/LogglyFormatter.php new file mode 100644 index 00000000..0191a3b6 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Formatter/LogglyFormatter.php @@ -0,0 +1,47 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Formatter; + +/** + * Encodes message information into JSON in a format compatible with Loggly. + * + * @author Adam Pancutt + */ +class LogglyFormatter extends JsonFormatter +{ + /** + * Overrides the default batch mode to new lines for compatibility with the + * Loggly bulk API. + * + * @param int $batchMode + */ + public function __construct($batchMode = self::BATCH_MODE_NEWLINES, $appendNewline = false) + { + parent::__construct($batchMode, $appendNewline); + } + + /** + * Appends the 'timestamp' parameter for indexing by Loggly. + * + * @see https://www.loggly.com/docs/automated-parsing/#json + * @see \Monolog\Formatter\JsonFormatter::format() + */ + public function format(array $record) + { + if (isset($record["datetime"]) && ($record["datetime"] instanceof \DateTime)) { + $record["timestamp"] = $record["datetime"]->format("Y-m-d\TH:i:s.uO"); + // TODO 2.0 unset the 'datetime' parameter, retained for BC + } + + return parent::format($record); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Formatter/LogstashFormatter.php b/vendor/monolog/monolog/src/Monolog/Formatter/LogstashFormatter.php new file mode 100644 index 00000000..ef90191f --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Formatter/LogstashFormatter.php @@ -0,0 +1,166 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Formatter; + +/** + * Serializes a log message to Logstash Event Format + * + * @see http://logstash.net/ + * @see https://github.com/logstash/logstash/blob/master/lib/logstash/event.rb + * + * @author Tim Mower + */ +class LogstashFormatter extends NormalizerFormatter +{ + const V0 = 0; + const V1 = 1; + + /** + * @var string the name of the system for the Logstash log message, used to fill the @source field + */ + protected $systemName; + + /** + * @var string an application name for the Logstash log message, used to fill the @type field + */ + protected $applicationName; + + /** + * @var string a prefix for 'extra' fields from the Monolog record (optional) + */ + protected $extraPrefix; + + /** + * @var string a prefix for 'context' fields from the Monolog record (optional) + */ + protected $contextPrefix; + + /** + * @var int logstash format version to use + */ + protected $version; + + /** + * @param string $applicationName the application that sends the data, used as the "type" field of logstash + * @param string $systemName the system/machine name, used as the "source" field of logstash, defaults to the hostname of the machine + * @param string $extraPrefix prefix for extra keys inside logstash "fields" + * @param string $contextPrefix prefix for context keys inside logstash "fields", defaults to ctxt_ + * @param int $version the logstash format version to use, defaults to 0 + */ + public function __construct($applicationName, $systemName = null, $extraPrefix = null, $contextPrefix = 'ctxt_', $version = self::V0) + { + // logstash requires a ISO 8601 format date with optional millisecond precision. + parent::__construct('Y-m-d\TH:i:s.uP'); + + $this->systemName = $systemName ?: gethostname(); + $this->applicationName = $applicationName; + $this->extraPrefix = $extraPrefix; + $this->contextPrefix = $contextPrefix; + $this->version = $version; + } + + /** + * {@inheritdoc} + */ + public function format(array $record) + { + $record = parent::format($record); + + if ($this->version === self::V1) { + $message = $this->formatV1($record); + } else { + $message = $this->formatV0($record); + } + + return $this->toJson($message) . "\n"; + } + + protected function formatV0(array $record) + { + if (empty($record['datetime'])) { + $record['datetime'] = gmdate('c'); + } + $message = array( + '@timestamp' => $record['datetime'], + '@source' => $this->systemName, + '@fields' => array(), + ); + if (isset($record['message'])) { + $message['@message'] = $record['message']; + } + if (isset($record['channel'])) { + $message['@tags'] = array($record['channel']); + $message['@fields']['channel'] = $record['channel']; + } + if (isset($record['level'])) { + $message['@fields']['level'] = $record['level']; + } + if ($this->applicationName) { + $message['@type'] = $this->applicationName; + } + if (isset($record['extra']['server'])) { + $message['@source_host'] = $record['extra']['server']; + } + if (isset($record['extra']['url'])) { + $message['@source_path'] = $record['extra']['url']; + } + if (!empty($record['extra'])) { + foreach ($record['extra'] as $key => $val) { + $message['@fields'][$this->extraPrefix . $key] = $val; + } + } + if (!empty($record['context'])) { + foreach ($record['context'] as $key => $val) { + $message['@fields'][$this->contextPrefix . $key] = $val; + } + } + + return $message; + } + + protected function formatV1(array $record) + { + if (empty($record['datetime'])) { + $record['datetime'] = gmdate('c'); + } + $message = array( + '@timestamp' => $record['datetime'], + '@version' => 1, + 'host' => $this->systemName, + ); + if (isset($record['message'])) { + $message['message'] = $record['message']; + } + if (isset($record['channel'])) { + $message['type'] = $record['channel']; + $message['channel'] = $record['channel']; + } + if (isset($record['level_name'])) { + $message['level'] = $record['level_name']; + } + if ($this->applicationName) { + $message['type'] = $this->applicationName; + } + if (!empty($record['extra'])) { + foreach ($record['extra'] as $key => $val) { + $message[$this->extraPrefix . $key] = $val; + } + } + if (!empty($record['context'])) { + foreach ($record['context'] as $key => $val) { + $message[$this->contextPrefix . $key] = $val; + } + } + + return $message; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Formatter/MongoDBFormatter.php b/vendor/monolog/monolog/src/Monolog/Formatter/MongoDBFormatter.php new file mode 100644 index 00000000..7880391a --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Formatter/MongoDBFormatter.php @@ -0,0 +1,107 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Formatter; + +use Monolog\Utils; + +/** + * Formats a record for use with the MongoDBHandler. + * + * @author Florian Plattner + */ +class MongoDBFormatter implements FormatterInterface +{ + private $exceptionTraceAsString; + private $maxNestingLevel; + + /** + * @param int $maxNestingLevel 0 means infinite nesting, the $record itself is level 1, $record['context'] is 2 + * @param bool $exceptionTraceAsString set to false to log exception traces as a sub documents instead of strings + */ + public function __construct($maxNestingLevel = 3, $exceptionTraceAsString = true) + { + $this->maxNestingLevel = max($maxNestingLevel, 0); + $this->exceptionTraceAsString = (bool) $exceptionTraceAsString; + } + + /** + * {@inheritDoc} + */ + public function format(array $record) + { + return $this->formatArray($record); + } + + /** + * {@inheritDoc} + */ + public function formatBatch(array $records) + { + foreach ($records as $key => $record) { + $records[$key] = $this->format($record); + } + + return $records; + } + + protected function formatArray(array $record, $nestingLevel = 0) + { + if ($this->maxNestingLevel == 0 || $nestingLevel <= $this->maxNestingLevel) { + foreach ($record as $name => $value) { + if ($value instanceof \DateTime) { + $record[$name] = $this->formatDate($value, $nestingLevel + 1); + } elseif ($value instanceof \Exception) { + $record[$name] = $this->formatException($value, $nestingLevel + 1); + } elseif (is_array($value)) { + $record[$name] = $this->formatArray($value, $nestingLevel + 1); + } elseif (is_object($value)) { + $record[$name] = $this->formatObject($value, $nestingLevel + 1); + } + } + } else { + $record = '[...]'; + } + + return $record; + } + + protected function formatObject($value, $nestingLevel) + { + $objectVars = get_object_vars($value); + $objectVars['class'] = Utils::getClass($value); + + return $this->formatArray($objectVars, $nestingLevel); + } + + protected function formatException(\Exception $exception, $nestingLevel) + { + $formattedException = array( + 'class' => Utils::getClass($exception), + 'message' => $exception->getMessage(), + 'code' => (int) $exception->getCode(), + 'file' => $exception->getFile() . ':' . $exception->getLine(), + ); + + if ($this->exceptionTraceAsString === true) { + $formattedException['trace'] = $exception->getTraceAsString(); + } else { + $formattedException['trace'] = $exception->getTrace(); + } + + return $this->formatArray($formattedException, $nestingLevel); + } + + protected function formatDate(\DateTime $value, $nestingLevel) + { + return new \MongoDate($value->getTimestamp()); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Formatter/NormalizerFormatter.php b/vendor/monolog/monolog/src/Monolog/Formatter/NormalizerFormatter.php new file mode 100644 index 00000000..0c0da28c --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Formatter/NormalizerFormatter.php @@ -0,0 +1,176 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Formatter; + +use Exception; +use Monolog\Utils; + +/** + * Normalizes incoming records to remove objects/resources so it's easier to dump to various targets + * + * @author Jordi Boggiano + */ +class NormalizerFormatter implements FormatterInterface +{ + const SIMPLE_DATE = "Y-m-d H:i:s"; + + protected $dateFormat; + + /** + * @param string $dateFormat The format of the timestamp: one supported by DateTime::format + */ + public function __construct($dateFormat = null) + { + $this->dateFormat = $dateFormat ?: static::SIMPLE_DATE; + if (!function_exists('json_encode')) { + throw new \RuntimeException('PHP\'s json extension is required to use Monolog\'s NormalizerFormatter'); + } + } + + /** + * {@inheritdoc} + */ + public function format(array $record) + { + return $this->normalize($record); + } + + /** + * {@inheritdoc} + */ + public function formatBatch(array $records) + { + foreach ($records as $key => $record) { + $records[$key] = $this->format($record); + } + + return $records; + } + + protected function normalize($data, $depth = 0) + { + if ($depth > 9) { + return 'Over 9 levels deep, aborting normalization'; + } + + if (null === $data || is_scalar($data)) { + if (is_float($data)) { + if (is_infinite($data)) { + return ($data > 0 ? '' : '-') . 'INF'; + } + if (is_nan($data)) { + return 'NaN'; + } + } + + return $data; + } + + if (is_array($data)) { + $normalized = array(); + + $count = 1; + foreach ($data as $key => $value) { + if ($count++ > 1000) { + $normalized['...'] = 'Over 1000 items ('.count($data).' total), aborting normalization'; + break; + } + + $normalized[$key] = $this->normalize($value, $depth+1); + } + + return $normalized; + } + + if ($data instanceof \DateTime) { + return $data->format($this->dateFormat); + } + + if (is_object($data)) { + // TODO 2.0 only check for Throwable + if ($data instanceof Exception || (PHP_VERSION_ID > 70000 && $data instanceof \Throwable)) { + return $this->normalizeException($data); + } + + // non-serializable objects that implement __toString stringified + if (method_exists($data, '__toString') && !$data instanceof \JsonSerializable) { + $value = $data->__toString(); + } else { + // the rest is json-serialized in some way + $value = $this->toJson($data, true); + } + + return sprintf("[object] (%s: %s)", Utils::getClass($data), $value); + } + + if (is_resource($data)) { + return sprintf('[resource] (%s)', get_resource_type($data)); + } + + return '[unknown('.gettype($data).')]'; + } + + protected function normalizeException($e) + { + // TODO 2.0 only check for Throwable + if (!$e instanceof Exception && !$e instanceof \Throwable) { + throw new \InvalidArgumentException('Exception/Throwable expected, got '.gettype($e).' / '.Utils::getClass($e)); + } + + $data = array( + 'class' => Utils::getClass($e), + 'message' => $e->getMessage(), + 'code' => (int) $e->getCode(), + 'file' => $e->getFile().':'.$e->getLine(), + ); + + if ($e instanceof \SoapFault) { + if (isset($e->faultcode)) { + $data['faultcode'] = $e->faultcode; + } + + if (isset($e->faultactor)) { + $data['faultactor'] = $e->faultactor; + } + + if (isset($e->detail) && (is_string($e->detail) || is_object($e->detail) || is_array($e->detail))) { + $data['detail'] = is_string($e->detail) ? $e->detail : reset($e->detail); + } + } + + $trace = $e->getTrace(); + foreach ($trace as $frame) { + if (isset($frame['file'])) { + $data['trace'][] = $frame['file'].':'.$frame['line']; + } + } + + if ($previous = $e->getPrevious()) { + $data['previous'] = $this->normalizeException($previous); + } + + return $data; + } + + /** + * Return the JSON representation of a value + * + * @param mixed $data + * @param bool $ignoreErrors + * @throws \RuntimeException if encoding fails and errors are not ignored + * @return string + */ + protected function toJson($data, $ignoreErrors = false) + { + return Utils::jsonEncode($data, null, $ignoreErrors); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Formatter/ScalarFormatter.php b/vendor/monolog/monolog/src/Monolog/Formatter/ScalarFormatter.php new file mode 100644 index 00000000..4a915d4c --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Formatter/ScalarFormatter.php @@ -0,0 +1,48 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Formatter; + +/** + * Formats data into an associative array of scalar values. + * Objects and arrays will be JSON encoded. + * + * @author Andrew Lawson + */ +class ScalarFormatter extends NormalizerFormatter +{ + /** + * {@inheritdoc} + */ + public function format(array $record) + { + foreach ($record as $key => $value) { + $record[$key] = $this->normalizeValue($value); + } + + return $record; + } + + /** + * @param mixed $value + * @return mixed + */ + protected function normalizeValue($value) + { + $normalized = $this->normalize($value); + + if (is_array($normalized) || is_object($normalized)) { + return $this->toJson($normalized, true); + } + + return $normalized; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Formatter/WildfireFormatter.php b/vendor/monolog/monolog/src/Monolog/Formatter/WildfireFormatter.php new file mode 100644 index 00000000..d1c0c5f6 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Formatter/WildfireFormatter.php @@ -0,0 +1,113 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Formatter; + +use Monolog\Logger; + +/** + * Serializes a log message according to Wildfire's header requirements + * + * @author Eric Clemmons (@ericclemmons) + * @author Christophe Coevoet + * @author Kirill chEbba Chebunin + */ +class WildfireFormatter extends NormalizerFormatter +{ + const TABLE = 'table'; + + /** + * Translates Monolog log levels to Wildfire levels. + */ + private $logLevels = array( + Logger::DEBUG => 'LOG', + Logger::INFO => 'INFO', + Logger::NOTICE => 'INFO', + Logger::WARNING => 'WARN', + Logger::ERROR => 'ERROR', + Logger::CRITICAL => 'ERROR', + Logger::ALERT => 'ERROR', + Logger::EMERGENCY => 'ERROR', + ); + + /** + * {@inheritdoc} + */ + public function format(array $record) + { + // Retrieve the line and file if set and remove them from the formatted extra + $file = $line = ''; + if (isset($record['extra']['file'])) { + $file = $record['extra']['file']; + unset($record['extra']['file']); + } + if (isset($record['extra']['line'])) { + $line = $record['extra']['line']; + unset($record['extra']['line']); + } + + $record = $this->normalize($record); + $message = array('message' => $record['message']); + $handleError = false; + if ($record['context']) { + $message['context'] = $record['context']; + $handleError = true; + } + if ($record['extra']) { + $message['extra'] = $record['extra']; + $handleError = true; + } + if (count($message) === 1) { + $message = reset($message); + } + + if (isset($record['context'][self::TABLE])) { + $type = 'TABLE'; + $label = $record['channel'] .': '. $record['message']; + $message = $record['context'][self::TABLE]; + } else { + $type = $this->logLevels[$record['level']]; + $label = $record['channel']; + } + + // Create JSON object describing the appearance of the message in the console + $json = $this->toJson(array( + array( + 'Type' => $type, + 'File' => $file, + 'Line' => $line, + 'Label' => $label, + ), + $message, + ), $handleError); + + // The message itself is a serialization of the above JSON object + it's length + return sprintf( + '%s|%s|', + strlen($json), + $json + ); + } + + public function formatBatch(array $records) + { + throw new \BadMethodCallException('Batch formatting does not make sense for the WildfireFormatter'); + } + + protected function normalize($data, $depth = 0) + { + if (is_object($data) && !$data instanceof \DateTime) { + return $data; + } + + return parent::normalize($data, $depth); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/AbstractHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/AbstractHandler.php new file mode 100644 index 00000000..8a3f9f8b --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/AbstractHandler.php @@ -0,0 +1,196 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Formatter\FormatterInterface; +use Monolog\Formatter\LineFormatter; +use Monolog\Logger; +use Monolog\ResettableInterface; + +/** + * Base Handler class providing the Handler structure + * + * @author Jordi Boggiano + */ +abstract class AbstractHandler implements HandlerInterface, ResettableInterface +{ + protected $level = Logger::DEBUG; + protected $bubble = true; + + /** + * @var FormatterInterface + */ + protected $formatter; + protected $processors = array(); + + /** + * @param int $level The minimum logging level at which this handler will be triggered + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + */ + public function __construct($level = Logger::DEBUG, $bubble = true) + { + $this->setLevel($level); + $this->bubble = $bubble; + } + + /** + * {@inheritdoc} + */ + public function isHandling(array $record) + { + return $record['level'] >= $this->level; + } + + /** + * {@inheritdoc} + */ + public function handleBatch(array $records) + { + foreach ($records as $record) { + $this->handle($record); + } + } + + /** + * Closes the handler. + * + * This will be called automatically when the object is destroyed + */ + public function close() + { + } + + /** + * {@inheritdoc} + */ + public function pushProcessor($callback) + { + if (!is_callable($callback)) { + throw new \InvalidArgumentException('Processors must be valid callables (callback or object with an __invoke method), '.var_export($callback, true).' given'); + } + array_unshift($this->processors, $callback); + + return $this; + } + + /** + * {@inheritdoc} + */ + public function popProcessor() + { + if (!$this->processors) { + throw new \LogicException('You tried to pop from an empty processor stack.'); + } + + return array_shift($this->processors); + } + + /** + * {@inheritdoc} + */ + public function setFormatter(FormatterInterface $formatter) + { + $this->formatter = $formatter; + + return $this; + } + + /** + * {@inheritdoc} + */ + public function getFormatter() + { + if (!$this->formatter) { + $this->formatter = $this->getDefaultFormatter(); + } + + return $this->formatter; + } + + /** + * Sets minimum logging level at which this handler will be triggered. + * + * @param int|string $level Level or level name + * @return self + */ + public function setLevel($level) + { + $this->level = Logger::toMonologLevel($level); + + return $this; + } + + /** + * Gets minimum logging level at which this handler will be triggered. + * + * @return int + */ + public function getLevel() + { + return $this->level; + } + + /** + * Sets the bubbling behavior. + * + * @param bool $bubble true means that this handler allows bubbling. + * false means that bubbling is not permitted. + * @return self + */ + public function setBubble($bubble) + { + $this->bubble = $bubble; + + return $this; + } + + /** + * Gets the bubbling behavior. + * + * @return bool true means that this handler allows bubbling. + * false means that bubbling is not permitted. + */ + public function getBubble() + { + return $this->bubble; + } + + public function __destruct() + { + try { + $this->close(); + } catch (\Exception $e) { + // do nothing + } catch (\Throwable $e) { + // do nothing + } + } + + public function reset() + { + foreach ($this->processors as $processor) { + if ($processor instanceof ResettableInterface) { + $processor->reset(); + } + } + } + + /** + * Gets the default formatter. + * + * @return FormatterInterface + */ + protected function getDefaultFormatter() + { + return new LineFormatter(); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/AbstractProcessingHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/AbstractProcessingHandler.php new file mode 100644 index 00000000..9dbec400 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/AbstractProcessingHandler.php @@ -0,0 +1,68 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\ResettableInterface; + +/** + * Base Handler class providing the Handler structure + * + * Classes extending it should (in most cases) only implement write($record) + * + * @author Jordi Boggiano + * @author Christophe Coevoet + */ +abstract class AbstractProcessingHandler extends AbstractHandler +{ + /** + * {@inheritdoc} + */ + public function handle(array $record) + { + if (!$this->isHandling($record)) { + return false; + } + + $record = $this->processRecord($record); + + $record['formatted'] = $this->getFormatter()->format($record); + + $this->write($record); + + return false === $this->bubble; + } + + /** + * Writes the record down to the log of the implementing handler + * + * @param array $record + * @return void + */ + abstract protected function write(array $record); + + /** + * Processes a record. + * + * @param array $record + * @return array + */ + protected function processRecord(array $record) + { + if ($this->processors) { + foreach ($this->processors as $processor) { + $record = call_user_func($processor, $record); + } + } + + return $record; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/AbstractSyslogHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/AbstractSyslogHandler.php new file mode 100644 index 00000000..2f3ac86d --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/AbstractSyslogHandler.php @@ -0,0 +1,101 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Logger; +use Monolog\Formatter\LineFormatter; + +/** + * Common syslog functionality + */ +abstract class AbstractSyslogHandler extends AbstractProcessingHandler +{ + protected $facility; + + /** + * Translates Monolog log levels to syslog log priorities. + */ + protected $logLevels = array( + Logger::DEBUG => LOG_DEBUG, + Logger::INFO => LOG_INFO, + Logger::NOTICE => LOG_NOTICE, + Logger::WARNING => LOG_WARNING, + Logger::ERROR => LOG_ERR, + Logger::CRITICAL => LOG_CRIT, + Logger::ALERT => LOG_ALERT, + Logger::EMERGENCY => LOG_EMERG, + ); + + /** + * List of valid log facility names. + */ + protected $facilities = array( + 'auth' => LOG_AUTH, + 'authpriv' => LOG_AUTHPRIV, + 'cron' => LOG_CRON, + 'daemon' => LOG_DAEMON, + 'kern' => LOG_KERN, + 'lpr' => LOG_LPR, + 'mail' => LOG_MAIL, + 'news' => LOG_NEWS, + 'syslog' => LOG_SYSLOG, + 'user' => LOG_USER, + 'uucp' => LOG_UUCP, + ); + + /** + * @param mixed $facility + * @param int $level The minimum logging level at which this handler will be triggered + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + */ + public function __construct($facility = LOG_USER, $level = Logger::DEBUG, $bubble = true) + { + parent::__construct($level, $bubble); + + if (!defined('PHP_WINDOWS_VERSION_BUILD')) { + $this->facilities['local0'] = LOG_LOCAL0; + $this->facilities['local1'] = LOG_LOCAL1; + $this->facilities['local2'] = LOG_LOCAL2; + $this->facilities['local3'] = LOG_LOCAL3; + $this->facilities['local4'] = LOG_LOCAL4; + $this->facilities['local5'] = LOG_LOCAL5; + $this->facilities['local6'] = LOG_LOCAL6; + $this->facilities['local7'] = LOG_LOCAL7; + } else { + $this->facilities['local0'] = 128; // LOG_LOCAL0 + $this->facilities['local1'] = 136; // LOG_LOCAL1 + $this->facilities['local2'] = 144; // LOG_LOCAL2 + $this->facilities['local3'] = 152; // LOG_LOCAL3 + $this->facilities['local4'] = 160; // LOG_LOCAL4 + $this->facilities['local5'] = 168; // LOG_LOCAL5 + $this->facilities['local6'] = 176; // LOG_LOCAL6 + $this->facilities['local7'] = 184; // LOG_LOCAL7 + } + + // convert textual description of facility to syslog constant + if (array_key_exists(strtolower($facility), $this->facilities)) { + $facility = $this->facilities[strtolower($facility)]; + } elseif (!in_array($facility, array_values($this->facilities), true)) { + throw new \UnexpectedValueException('Unknown facility value "'.$facility.'" given'); + } + + $this->facility = $facility; + } + + /** + * {@inheritdoc} + */ + protected function getDefaultFormatter() + { + return new LineFormatter('%channel%.%level_name%: %message% %context% %extra%'); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/AmqpHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/AmqpHandler.php new file mode 100644 index 00000000..fef4d8dd --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/AmqpHandler.php @@ -0,0 +1,148 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Logger; +use Monolog\Formatter\JsonFormatter; +use PhpAmqpLib\Message\AMQPMessage; +use PhpAmqpLib\Channel\AMQPChannel; +use AMQPExchange; + +class AmqpHandler extends AbstractProcessingHandler +{ + /** + * @var AMQPExchange|AMQPChannel $exchange + */ + protected $exchange; + + /** + * @var string + */ + protected $exchangeName; + + /** + * @param AMQPExchange|AMQPChannel $exchange AMQPExchange (php AMQP ext) or PHP AMQP lib channel, ready for use + * @param string $exchangeName + * @param int $level + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + */ + public function __construct($exchange, $exchangeName = 'log', $level = Logger::DEBUG, $bubble = true) + { + if ($exchange instanceof AMQPExchange) { + $exchange->setName($exchangeName); + } elseif ($exchange instanceof AMQPChannel) { + $this->exchangeName = $exchangeName; + } else { + throw new \InvalidArgumentException('PhpAmqpLib\Channel\AMQPChannel or AMQPExchange instance required'); + } + $this->exchange = $exchange; + + parent::__construct($level, $bubble); + } + + /** + * {@inheritDoc} + */ + protected function write(array $record) + { + $data = $record["formatted"]; + $routingKey = $this->getRoutingKey($record); + + if ($this->exchange instanceof AMQPExchange) { + $this->exchange->publish( + $data, + $routingKey, + 0, + array( + 'delivery_mode' => 2, + 'content_type' => 'application/json', + ) + ); + } else { + $this->exchange->basic_publish( + $this->createAmqpMessage($data), + $this->exchangeName, + $routingKey + ); + } + } + + /** + * {@inheritDoc} + */ + public function handleBatch(array $records) + { + if ($this->exchange instanceof AMQPExchange) { + parent::handleBatch($records); + + return; + } + + foreach ($records as $record) { + if (!$this->isHandling($record)) { + continue; + } + + $record = $this->processRecord($record); + $data = $this->getFormatter()->format($record); + + $this->exchange->batch_basic_publish( + $this->createAmqpMessage($data), + $this->exchangeName, + $this->getRoutingKey($record) + ); + } + + $this->exchange->publish_batch(); + } + + /** + * Gets the routing key for the AMQP exchange + * + * @param array $record + * @return string + */ + protected function getRoutingKey(array $record) + { + $routingKey = sprintf( + '%s.%s', + // TODO 2.0 remove substr call + substr($record['level_name'], 0, 4), + $record['channel'] + ); + + return strtolower($routingKey); + } + + /** + * @param string $data + * @return AMQPMessage + */ + private function createAmqpMessage($data) + { + return new AMQPMessage( + (string) $data, + array( + 'delivery_mode' => 2, + 'content_type' => 'application/json', + ) + ); + } + + /** + * {@inheritDoc} + */ + protected function getDefaultFormatter() + { + return new JsonFormatter(JsonFormatter::BATCH_MODE_JSON, false); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/BrowserConsoleHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/BrowserConsoleHandler.php new file mode 100644 index 00000000..956231b2 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/BrowserConsoleHandler.php @@ -0,0 +1,241 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Formatter\LineFormatter; + +/** + * Handler sending logs to browser's javascript console with no browser extension required + * + * @author Olivier Poitrey + */ +class BrowserConsoleHandler extends AbstractProcessingHandler +{ + protected static $initialized = false; + protected static $records = array(); + + /** + * {@inheritDoc} + * + * Formatted output may contain some formatting markers to be transferred to `console.log` using the %c format. + * + * Example of formatted string: + * + * You can do [[blue text]]{color: blue} or [[green background]]{background-color: green; color: white} + */ + protected function getDefaultFormatter() + { + return new LineFormatter('[[%channel%]]{macro: autolabel} [[%level_name%]]{font-weight: bold} %message%'); + } + + /** + * {@inheritDoc} + */ + protected function write(array $record) + { + // Accumulate records + static::$records[] = $record; + + // Register shutdown handler if not already done + if (!static::$initialized) { + static::$initialized = true; + $this->registerShutdownFunction(); + } + } + + /** + * Convert records to javascript console commands and send it to the browser. + * This method is automatically called on PHP shutdown if output is HTML or Javascript. + */ + public static function send() + { + $format = static::getResponseFormat(); + if ($format === 'unknown') { + return; + } + + if (count(static::$records)) { + if ($format === 'html') { + static::writeOutput(''); + } elseif ($format === 'js') { + static::writeOutput(static::generateScript()); + } + static::resetStatic(); + } + } + + public function close() + { + self::resetStatic(); + } + + public function reset() + { + self::resetStatic(); + } + + /** + * Forget all logged records + */ + public static function resetStatic() + { + static::$records = array(); + } + + /** + * Wrapper for register_shutdown_function to allow overriding + */ + protected function registerShutdownFunction() + { + if (PHP_SAPI !== 'cli') { + register_shutdown_function(array('Monolog\Handler\BrowserConsoleHandler', 'send')); + } + } + + /** + * Wrapper for echo to allow overriding + * + * @param string $str + */ + protected static function writeOutput($str) + { + echo $str; + } + + /** + * Checks the format of the response + * + * If Content-Type is set to application/javascript or text/javascript -> js + * If Content-Type is set to text/html, or is unset -> html + * If Content-Type is anything else -> unknown + * + * @return string One of 'js', 'html' or 'unknown' + */ + protected static function getResponseFormat() + { + // Check content type + foreach (headers_list() as $header) { + if (stripos($header, 'content-type:') === 0) { + // This handler only works with HTML and javascript outputs + // text/javascript is obsolete in favour of application/javascript, but still used + if (stripos($header, 'application/javascript') !== false || stripos($header, 'text/javascript') !== false) { + return 'js'; + } + if (stripos($header, 'text/html') === false) { + return 'unknown'; + } + break; + } + } + + return 'html'; + } + + private static function generateScript() + { + $script = array(); + foreach (static::$records as $record) { + $context = static::dump('Context', $record['context']); + $extra = static::dump('Extra', $record['extra']); + + if (empty($context) && empty($extra)) { + $script[] = static::call_array('log', static::handleStyles($record['formatted'])); + } else { + $script = array_merge($script, + array(static::call_array('groupCollapsed', static::handleStyles($record['formatted']))), + $context, + $extra, + array(static::call('groupEnd')) + ); + } + } + + return "(function (c) {if (c && c.groupCollapsed) {\n" . implode("\n", $script) . "\n}})(console);"; + } + + private static function handleStyles($formatted) + { + $args = array(); + $format = '%c' . $formatted; + preg_match_all('/\[\[(.*?)\]\]\{([^}]*)\}/s', $format, $matches, PREG_OFFSET_CAPTURE | PREG_SET_ORDER); + + foreach (array_reverse($matches) as $match) { + $args[] = '"font-weight: normal"'; + $args[] = static::quote(static::handleCustomStyles($match[2][0], $match[1][0])); + + $pos = $match[0][1]; + $format = substr($format, 0, $pos) . '%c' . $match[1][0] . '%c' . substr($format, $pos + strlen($match[0][0])); + } + + $args[] = static::quote('font-weight: normal'); + $args[] = static::quote($format); + + return array_reverse($args); + } + + private static function handleCustomStyles($style, $string) + { + static $colors = array('blue', 'green', 'red', 'magenta', 'orange', 'black', 'grey'); + static $labels = array(); + + return preg_replace_callback('/macro\s*:(.*?)(?:;|$)/', function ($m) use ($string, &$colors, &$labels) { + if (trim($m[1]) === 'autolabel') { + // Format the string as a label with consistent auto assigned background color + if (!isset($labels[$string])) { + $labels[$string] = $colors[count($labels) % count($colors)]; + } + $color = $labels[$string]; + + return "background-color: $color; color: white; border-radius: 3px; padding: 0 2px 0 2px"; + } + + return $m[1]; + }, $style); + } + + private static function dump($title, array $dict) + { + $script = array(); + $dict = array_filter($dict); + if (empty($dict)) { + return $script; + } + $script[] = static::call('log', static::quote('%c%s'), static::quote('font-weight: bold'), static::quote($title)); + foreach ($dict as $key => $value) { + $value = json_encode($value); + if (empty($value)) { + $value = static::quote(''); + } + $script[] = static::call('log', static::quote('%s: %o'), static::quote($key), $value); + } + + return $script; + } + + private static function quote($arg) + { + return '"' . addcslashes($arg, "\"\n\\") . '"'; + } + + private static function call() + { + $args = func_get_args(); + $method = array_shift($args); + + return static::call_array($method, $args); + } + + private static function call_array($method, array $args) + { + return 'c.' . $method . '(' . implode(', ', $args) . ');'; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/BufferHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/BufferHandler.php new file mode 100644 index 00000000..430066b5 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/BufferHandler.php @@ -0,0 +1,148 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Logger; +use Monolog\ResettableInterface; +use Monolog\Formatter\FormatterInterface; + +/** + * Buffers all records until closing the handler and then pass them as batch. + * + * This is useful for a MailHandler to send only one mail per request instead of + * sending one per log message. + * + * @author Christophe Coevoet + */ +class BufferHandler extends AbstractHandler +{ + protected $handler; + protected $bufferSize = 0; + protected $bufferLimit; + protected $flushOnOverflow; + protected $buffer = array(); + protected $initialized = false; + + /** + * @param HandlerInterface $handler Handler. + * @param int $bufferLimit How many entries should be buffered at most, beyond that the oldest items are removed from the buffer. + * @param int $level The minimum logging level at which this handler will be triggered + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + * @param bool $flushOnOverflow If true, the buffer is flushed when the max size has been reached, by default oldest entries are discarded + */ + public function __construct(HandlerInterface $handler, $bufferLimit = 0, $level = Logger::DEBUG, $bubble = true, $flushOnOverflow = false) + { + parent::__construct($level, $bubble); + $this->handler = $handler; + $this->bufferLimit = (int) $bufferLimit; + $this->flushOnOverflow = $flushOnOverflow; + } + + /** + * {@inheritdoc} + */ + public function handle(array $record) + { + if ($record['level'] < $this->level) { + return false; + } + + if (!$this->initialized) { + // __destructor() doesn't get called on Fatal errors + register_shutdown_function(array($this, 'close')); + $this->initialized = true; + } + + if ($this->bufferLimit > 0 && $this->bufferSize === $this->bufferLimit) { + if ($this->flushOnOverflow) { + $this->flush(); + } else { + array_shift($this->buffer); + $this->bufferSize--; + } + } + + if ($this->processors) { + foreach ($this->processors as $processor) { + $record = call_user_func($processor, $record); + } + } + + $this->buffer[] = $record; + $this->bufferSize++; + + return false === $this->bubble; + } + + public function flush() + { + if ($this->bufferSize === 0) { + return; + } + + $this->handler->handleBatch($this->buffer); + $this->clear(); + } + + public function __destruct() + { + // suppress the parent behavior since we already have register_shutdown_function() + // to call close(), and the reference contained there will prevent this from being + // GC'd until the end of the request + } + + /** + * {@inheritdoc} + */ + public function close() + { + $this->flush(); + } + + /** + * Clears the buffer without flushing any messages down to the wrapped handler. + */ + public function clear() + { + $this->bufferSize = 0; + $this->buffer = array(); + } + + public function reset() + { + $this->flush(); + + parent::reset(); + + if ($this->handler instanceof ResettableInterface) { + $this->handler->reset(); + } + } + + /** + * {@inheritdoc} + */ + public function setFormatter(FormatterInterface $formatter) + { + $this->handler->setFormatter($formatter); + + return $this; + } + + /** + * {@inheritdoc} + */ + public function getFormatter() + { + return $this->handler->getFormatter(); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/ChromePHPHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/ChromePHPHandler.php new file mode 100644 index 00000000..1fbebc4f --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/ChromePHPHandler.php @@ -0,0 +1,212 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Formatter\ChromePHPFormatter; +use Monolog\Logger; +use Monolog\Utils; + +/** + * Handler sending logs to the ChromePHP extension (http://www.chromephp.com/) + * + * This also works out of the box with Firefox 43+ + * + * @author Christophe Coevoet + */ +class ChromePHPHandler extends AbstractProcessingHandler +{ + /** + * Version of the extension + */ + const VERSION = '4.0'; + + /** + * Header name + */ + const HEADER_NAME = 'X-ChromeLogger-Data'; + + /** + * Regular expression to detect supported browsers (matches any Chrome, or Firefox 43+) + */ + const USER_AGENT_REGEX = '{\b(?:Chrome/\d+(?:\.\d+)*|HeadlessChrome|Firefox/(?:4[3-9]|[5-9]\d|\d{3,})(?:\.\d)*)\b}'; + + protected static $initialized = false; + + /** + * Tracks whether we sent too much data + * + * Chrome limits the headers to 4KB, so when we sent 3KB we stop sending + * + * @var bool + */ + protected static $overflowed = false; + + protected static $json = array( + 'version' => self::VERSION, + 'columns' => array('label', 'log', 'backtrace', 'type'), + 'rows' => array(), + ); + + protected static $sendHeaders = true; + + /** + * @param int $level The minimum logging level at which this handler will be triggered + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + */ + public function __construct($level = Logger::DEBUG, $bubble = true) + { + parent::__construct($level, $bubble); + if (!function_exists('json_encode')) { + throw new \RuntimeException('PHP\'s json extension is required to use Monolog\'s ChromePHPHandler'); + } + } + + /** + * {@inheritdoc} + */ + public function handleBatch(array $records) + { + $messages = array(); + + foreach ($records as $record) { + if ($record['level'] < $this->level) { + continue; + } + $messages[] = $this->processRecord($record); + } + + if (!empty($messages)) { + $messages = $this->getFormatter()->formatBatch($messages); + self::$json['rows'] = array_merge(self::$json['rows'], $messages); + $this->send(); + } + } + + /** + * {@inheritDoc} + */ + protected function getDefaultFormatter() + { + return new ChromePHPFormatter(); + } + + /** + * Creates & sends header for a record + * + * @see sendHeader() + * @see send() + * @param array $record + */ + protected function write(array $record) + { + self::$json['rows'][] = $record['formatted']; + + $this->send(); + } + + /** + * Sends the log header + * + * @see sendHeader() + */ + protected function send() + { + if (self::$overflowed || !self::$sendHeaders) { + return; + } + + if (!self::$initialized) { + self::$initialized = true; + + self::$sendHeaders = $this->headersAccepted(); + if (!self::$sendHeaders) { + return; + } + + self::$json['request_uri'] = isset($_SERVER['REQUEST_URI']) ? $_SERVER['REQUEST_URI'] : ''; + } + + $json = Utils::jsonEncode(self::$json, null, true); + $data = base64_encode(utf8_encode($json)); + if (strlen($data) > 3 * 1024) { + self::$overflowed = true; + + $record = array( + 'message' => 'Incomplete logs, chrome header size limit reached', + 'context' => array(), + 'level' => Logger::WARNING, + 'level_name' => Logger::getLevelName(Logger::WARNING), + 'channel' => 'monolog', + 'datetime' => new \DateTime(), + 'extra' => array(), + ); + self::$json['rows'][count(self::$json['rows']) - 1] = $this->getFormatter()->format($record); + $json = Utils::jsonEncode(self::$json, null, true); + $data = base64_encode(utf8_encode($json)); + } + + if (trim($data) !== '') { + $this->sendHeader(self::HEADER_NAME, $data); + } + } + + /** + * Send header string to the client + * + * @param string $header + * @param string $content + */ + protected function sendHeader($header, $content) + { + if (!headers_sent() && self::$sendHeaders) { + header(sprintf('%s: %s', $header, $content)); + } + } + + /** + * Verifies if the headers are accepted by the current user agent + * + * @return bool + */ + protected function headersAccepted() + { + if (empty($_SERVER['HTTP_USER_AGENT'])) { + return false; + } + + return preg_match(self::USER_AGENT_REGEX, $_SERVER['HTTP_USER_AGENT']); + } + + /** + * BC getter for the sendHeaders property that has been made static + */ + public function __get($property) + { + if ('sendHeaders' !== $property) { + throw new \InvalidArgumentException('Undefined property '.$property); + } + + return static::$sendHeaders; + } + + /** + * BC setter for the sendHeaders property that has been made static + */ + public function __set($property, $value) + { + if ('sendHeaders' !== $property) { + throw new \InvalidArgumentException('Undefined property '.$property); + } + + static::$sendHeaders = $value; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/CouchDBHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/CouchDBHandler.php new file mode 100644 index 00000000..0b762caf --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/CouchDBHandler.php @@ -0,0 +1,72 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Formatter\JsonFormatter; +use Monolog\Logger; + +/** + * CouchDB handler + * + * @author Markus Bachmann + */ +class CouchDBHandler extends AbstractProcessingHandler +{ + private $options; + + public function __construct(array $options = array(), $level = Logger::DEBUG, $bubble = true) + { + $this->options = array_merge(array( + 'host' => 'localhost', + 'port' => 5984, + 'dbname' => 'logger', + 'username' => null, + 'password' => null, + ), $options); + + parent::__construct($level, $bubble); + } + + /** + * {@inheritDoc} + */ + protected function write(array $record) + { + $basicAuth = null; + if ($this->options['username']) { + $basicAuth = sprintf('%s:%s@', $this->options['username'], $this->options['password']); + } + + $url = 'http://'.$basicAuth.$this->options['host'].':'.$this->options['port'].'/'.$this->options['dbname']; + $context = stream_context_create(array( + 'http' => array( + 'method' => 'POST', + 'content' => $record['formatted'], + 'ignore_errors' => true, + 'max_redirects' => 0, + 'header' => 'Content-type: application/json', + ), + )); + + if (false === @file_get_contents($url, null, $context)) { + throw new \RuntimeException(sprintf('Could not connect to %s', $url)); + } + } + + /** + * {@inheritDoc} + */ + protected function getDefaultFormatter() + { + return new JsonFormatter(JsonFormatter::BATCH_MODE_JSON, false); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/CubeHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/CubeHandler.php new file mode 100644 index 00000000..2d03c06e --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/CubeHandler.php @@ -0,0 +1,152 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Logger; +use Monolog\Utils; + +/** + * Logs to Cube. + * + * @link http://square.github.com/cube/ + * @author Wan Chen + */ +class CubeHandler extends AbstractProcessingHandler +{ + private $udpConnection; + private $httpConnection; + private $scheme; + private $host; + private $port; + private $acceptedSchemes = array('http', 'udp'); + + /** + * Create a Cube handler + * + * @throws \UnexpectedValueException when given url is not a valid url. + * A valid url must consist of three parts : protocol://host:port + * Only valid protocols used by Cube are http and udp + */ + public function __construct($url, $level = Logger::DEBUG, $bubble = true) + { + $urlInfo = parse_url($url); + + if (!isset($urlInfo['scheme'], $urlInfo['host'], $urlInfo['port'])) { + throw new \UnexpectedValueException('URL "'.$url.'" is not valid'); + } + + if (!in_array($urlInfo['scheme'], $this->acceptedSchemes)) { + throw new \UnexpectedValueException( + 'Invalid protocol (' . $urlInfo['scheme'] . ').' + . ' Valid options are ' . implode(', ', $this->acceptedSchemes)); + } + + $this->scheme = $urlInfo['scheme']; + $this->host = $urlInfo['host']; + $this->port = $urlInfo['port']; + + parent::__construct($level, $bubble); + } + + /** + * Establish a connection to an UDP socket + * + * @throws \LogicException when unable to connect to the socket + * @throws MissingExtensionException when there is no socket extension + */ + protected function connectUdp() + { + if (!extension_loaded('sockets')) { + throw new MissingExtensionException('The sockets extension is required to use udp URLs with the CubeHandler'); + } + + $this->udpConnection = socket_create(AF_INET, SOCK_DGRAM, 0); + if (!$this->udpConnection) { + throw new \LogicException('Unable to create a socket'); + } + + if (!socket_connect($this->udpConnection, $this->host, $this->port)) { + throw new \LogicException('Unable to connect to the socket at ' . $this->host . ':' . $this->port); + } + } + + /** + * Establish a connection to a http server + * @throws \LogicException when no curl extension + */ + protected function connectHttp() + { + if (!extension_loaded('curl')) { + throw new \LogicException('The curl extension is needed to use http URLs with the CubeHandler'); + } + + $this->httpConnection = curl_init('http://'.$this->host.':'.$this->port.'/1.0/event/put'); + + if (!$this->httpConnection) { + throw new \LogicException('Unable to connect to ' . $this->host . ':' . $this->port); + } + + curl_setopt($this->httpConnection, CURLOPT_CUSTOMREQUEST, "POST"); + curl_setopt($this->httpConnection, CURLOPT_RETURNTRANSFER, true); + } + + /** + * {@inheritdoc} + */ + protected function write(array $record) + { + $date = $record['datetime']; + + $data = array('time' => $date->format('Y-m-d\TH:i:s.uO')); + unset($record['datetime']); + + if (isset($record['context']['type'])) { + $data['type'] = $record['context']['type']; + unset($record['context']['type']); + } else { + $data['type'] = $record['channel']; + } + + $data['data'] = $record['context']; + $data['data']['level'] = $record['level']; + + if ($this->scheme === 'http') { + $this->writeHttp(Utils::jsonEncode($data)); + } else { + $this->writeUdp(Utils::jsonEncode($data)); + } + } + + private function writeUdp($data) + { + if (!$this->udpConnection) { + $this->connectUdp(); + } + + socket_send($this->udpConnection, $data, strlen($data), 0); + } + + private function writeHttp($data) + { + if (!$this->httpConnection) { + $this->connectHttp(); + } + + curl_setopt($this->httpConnection, CURLOPT_POSTFIELDS, '['.$data.']'); + curl_setopt($this->httpConnection, CURLOPT_HTTPHEADER, array( + 'Content-Type: application/json', + 'Content-Length: ' . strlen('['.$data.']'), + )); + + Curl\Util::execute($this->httpConnection, 5, false); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/Curl/Util.php b/vendor/monolog/monolog/src/Monolog/Handler/Curl/Util.php new file mode 100644 index 00000000..f4649c7e --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/Curl/Util.php @@ -0,0 +1,57 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler\Curl; + +class Util +{ + private static $retriableErrorCodes = array( + CURLE_COULDNT_RESOLVE_HOST, + CURLE_COULDNT_CONNECT, + CURLE_HTTP_NOT_FOUND, + CURLE_READ_ERROR, + CURLE_OPERATION_TIMEOUTED, + CURLE_HTTP_POST_ERROR, + CURLE_SSL_CONNECT_ERROR, + ); + + /** + * Executes a CURL request with optional retries and exception on failure + * + * @param resource $ch curl handler + * @throws \RuntimeException + */ + public static function execute($ch, $retries = 5, $closeAfterDone = true) + { + while ($retries--) { + if (curl_exec($ch) === false) { + $curlErrno = curl_errno($ch); + + if (false === in_array($curlErrno, self::$retriableErrorCodes, true) || !$retries) { + $curlError = curl_error($ch); + + if ($closeAfterDone) { + curl_close($ch); + } + + throw new \RuntimeException(sprintf('Curl error (code %s): %s', $curlErrno, $curlError)); + } + + continue; + } + + if ($closeAfterDone) { + curl_close($ch); + } + break; + } + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/DeduplicationHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/DeduplicationHandler.php new file mode 100644 index 00000000..c70903d3 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/DeduplicationHandler.php @@ -0,0 +1,169 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Logger; + +/** + * Simple handler wrapper that deduplicates log records across multiple requests + * + * It also includes the BufferHandler functionality and will buffer + * all messages until the end of the request or flush() is called. + * + * This works by storing all log records' messages above $deduplicationLevel + * to the file specified by $deduplicationStore. When further logs come in at the end of the + * request (or when flush() is called), all those above $deduplicationLevel are checked + * against the existing stored logs. If they match and the timestamps in the stored log is + * not older than $time seconds, the new log record is discarded. If no log record is new, the + * whole data set is discarded. + * + * This is mainly useful in combination with Mail handlers or things like Slack or HipChat handlers + * that send messages to people, to avoid spamming with the same message over and over in case of + * a major component failure like a database server being down which makes all requests fail in the + * same way. + * + * @author Jordi Boggiano + */ +class DeduplicationHandler extends BufferHandler +{ + /** + * @var string + */ + protected $deduplicationStore; + + /** + * @var int + */ + protected $deduplicationLevel; + + /** + * @var int + */ + protected $time; + + /** + * @var bool + */ + private $gc = false; + + /** + * @param HandlerInterface $handler Handler. + * @param string $deduplicationStore The file/path where the deduplication log should be kept + * @param int $deduplicationLevel The minimum logging level for log records to be looked at for deduplication purposes + * @param int $time The period (in seconds) during which duplicate entries should be suppressed after a given log is sent through + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + */ + public function __construct(HandlerInterface $handler, $deduplicationStore = null, $deduplicationLevel = Logger::ERROR, $time = 60, $bubble = true) + { + parent::__construct($handler, 0, Logger::DEBUG, $bubble, false); + + $this->deduplicationStore = $deduplicationStore === null ? sys_get_temp_dir() . '/monolog-dedup-' . substr(md5(__FILE__), 0, 20) .'.log' : $deduplicationStore; + $this->deduplicationLevel = Logger::toMonologLevel($deduplicationLevel); + $this->time = $time; + } + + public function flush() + { + if ($this->bufferSize === 0) { + return; + } + + $passthru = null; + + foreach ($this->buffer as $record) { + if ($record['level'] >= $this->deduplicationLevel) { + + $passthru = $passthru || !$this->isDuplicate($record); + if ($passthru) { + $this->appendRecord($record); + } + } + } + + // default of null is valid as well as if no record matches duplicationLevel we just pass through + if ($passthru === true || $passthru === null) { + $this->handler->handleBatch($this->buffer); + } + + $this->clear(); + + if ($this->gc) { + $this->collectLogs(); + } + } + + private function isDuplicate(array $record) + { + if (!file_exists($this->deduplicationStore)) { + return false; + } + + $store = file($this->deduplicationStore, FILE_IGNORE_NEW_LINES | FILE_SKIP_EMPTY_LINES); + if (!is_array($store)) { + return false; + } + + $yesterday = time() - 86400; + $timestampValidity = $record['datetime']->getTimestamp() - $this->time; + $expectedMessage = preg_replace('{[\r\n].*}', '', $record['message']); + + for ($i = count($store) - 1; $i >= 0; $i--) { + list($timestamp, $level, $message) = explode(':', $store[$i], 3); + + if ($level === $record['level_name'] && $message === $expectedMessage && $timestamp > $timestampValidity) { + return true; + } + + if ($timestamp < $yesterday) { + $this->gc = true; + } + } + + return false; + } + + private function collectLogs() + { + if (!file_exists($this->deduplicationStore)) { + return false; + } + + $handle = fopen($this->deduplicationStore, 'rw+'); + flock($handle, LOCK_EX); + $validLogs = array(); + + $timestampValidity = time() - $this->time; + + while (!feof($handle)) { + $log = fgets($handle); + if (substr($log, 0, 10) >= $timestampValidity) { + $validLogs[] = $log; + } + } + + ftruncate($handle, 0); + rewind($handle); + foreach ($validLogs as $log) { + fwrite($handle, $log); + } + + flock($handle, LOCK_UN); + fclose($handle); + + $this->gc = false; + } + + private function appendRecord(array $record) + { + file_put_contents($this->deduplicationStore, $record['datetime']->getTimestamp() . ':' . $record['level_name'] . ':' . preg_replace('{[\r\n].*}', '', $record['message']) . "\n", FILE_APPEND); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/DoctrineCouchDBHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/DoctrineCouchDBHandler.php new file mode 100644 index 00000000..5b477889 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/DoctrineCouchDBHandler.php @@ -0,0 +1,45 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Logger; +use Monolog\Formatter\NormalizerFormatter; +use Doctrine\CouchDB\CouchDBClient; + +/** + * CouchDB handler for Doctrine CouchDB ODM + * + * @author Markus Bachmann + */ +class DoctrineCouchDBHandler extends AbstractProcessingHandler +{ + private $client; + + public function __construct(CouchDBClient $client, $level = Logger::DEBUG, $bubble = true) + { + $this->client = $client; + parent::__construct($level, $bubble); + } + + /** + * {@inheritDoc} + */ + protected function write(array $record) + { + $this->client->postDocument($record['formatted']); + } + + protected function getDefaultFormatter() + { + return new NormalizerFormatter; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/DynamoDbHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/DynamoDbHandler.php new file mode 100644 index 00000000..f822332a --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/DynamoDbHandler.php @@ -0,0 +1,107 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Aws\Sdk; +use Aws\DynamoDb\DynamoDbClient; +use Aws\DynamoDb\Marshaler; +use Monolog\Formatter\ScalarFormatter; +use Monolog\Logger; + +/** + * Amazon DynamoDB handler (http://aws.amazon.com/dynamodb/) + * + * @link https://github.com/aws/aws-sdk-php/ + * @author Andrew Lawson + */ +class DynamoDbHandler extends AbstractProcessingHandler +{ + const DATE_FORMAT = 'Y-m-d\TH:i:s.uO'; + + /** + * @var DynamoDbClient + */ + protected $client; + + /** + * @var string + */ + protected $table; + + /** + * @var int + */ + protected $version; + + /** + * @var Marshaler + */ + protected $marshaler; + + /** + * @param DynamoDbClient $client + * @param string $table + * @param int $level + * @param bool $bubble + */ + public function __construct(DynamoDbClient $client, $table, $level = Logger::DEBUG, $bubble = true) + { + if (defined('Aws\Sdk::VERSION') && version_compare(Sdk::VERSION, '3.0', '>=')) { + $this->version = 3; + $this->marshaler = new Marshaler; + } else { + $this->version = 2; + } + + $this->client = $client; + $this->table = $table; + + parent::__construct($level, $bubble); + } + + /** + * {@inheritdoc} + */ + protected function write(array $record) + { + $filtered = $this->filterEmptyFields($record['formatted']); + if ($this->version === 3) { + $formatted = $this->marshaler->marshalItem($filtered); + } else { + $formatted = $this->client->formatAttributes($filtered); + } + + $this->client->putItem(array( + 'TableName' => $this->table, + 'Item' => $formatted, + )); + } + + /** + * @param array $record + * @return array + */ + protected function filterEmptyFields(array $record) + { + return array_filter($record, function ($value) { + return !empty($value) || false === $value || 0 === $value; + }); + } + + /** + * {@inheritdoc} + */ + protected function getDefaultFormatter() + { + return new ScalarFormatter(self::DATE_FORMAT); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/ElasticSearchHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/ElasticSearchHandler.php new file mode 100644 index 00000000..84792a75 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/ElasticSearchHandler.php @@ -0,0 +1,128 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Formatter\FormatterInterface; +use Monolog\Formatter\ElasticaFormatter; +use Monolog\Logger; +use Elastica\Client; +use Elastica\Exception\ExceptionInterface; + +/** + * Elastic Search handler + * + * Usage example: + * + * $client = new \Elastica\Client(); + * $options = array( + * 'index' => 'elastic_index_name', + * 'type' => 'elastic_doc_type', + * ); + * $handler = new ElasticSearchHandler($client, $options); + * $log = new Logger('application'); + * $log->pushHandler($handler); + * + * @author Jelle Vink + */ +class ElasticSearchHandler extends AbstractProcessingHandler +{ + /** + * @var Client + */ + protected $client; + + /** + * @var array Handler config options + */ + protected $options = array(); + + /** + * @param Client $client Elastica Client object + * @param array $options Handler configuration + * @param int $level The minimum logging level at which this handler will be triggered + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + */ + public function __construct(Client $client, array $options = array(), $level = Logger::DEBUG, $bubble = true) + { + parent::__construct($level, $bubble); + $this->client = $client; + $this->options = array_merge( + array( + 'index' => 'monolog', // Elastic index name + 'type' => 'record', // Elastic document type + 'ignore_error' => false, // Suppress Elastica exceptions + ), + $options + ); + } + + /** + * {@inheritDoc} + */ + protected function write(array $record) + { + $this->bulkSend(array($record['formatted'])); + } + + /** + * {@inheritdoc} + */ + public function setFormatter(FormatterInterface $formatter) + { + if ($formatter instanceof ElasticaFormatter) { + return parent::setFormatter($formatter); + } + throw new \InvalidArgumentException('ElasticSearchHandler is only compatible with ElasticaFormatter'); + } + + /** + * Getter options + * @return array + */ + public function getOptions() + { + return $this->options; + } + + /** + * {@inheritDoc} + */ + protected function getDefaultFormatter() + { + return new ElasticaFormatter($this->options['index'], $this->options['type']); + } + + /** + * {@inheritdoc} + */ + public function handleBatch(array $records) + { + $documents = $this->getFormatter()->formatBatch($records); + $this->bulkSend($documents); + } + + /** + * Use Elasticsearch bulk API to send list of documents + * @param array $documents + * @throws \RuntimeException + */ + protected function bulkSend(array $documents) + { + try { + $this->client->addDocuments($documents); + } catch (ExceptionInterface $e) { + if (!$this->options['ignore_error']) { + throw new \RuntimeException("Error sending messages to Elasticsearch", 0, $e); + } + } + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/ErrorLogHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/ErrorLogHandler.php new file mode 100644 index 00000000..f0df5a71 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/ErrorLogHandler.php @@ -0,0 +1,82 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Formatter\LineFormatter; +use Monolog\Logger; + +/** + * Stores to PHP error_log() handler. + * + * @author Elan Ruusamäe + */ +class ErrorLogHandler extends AbstractProcessingHandler +{ + const OPERATING_SYSTEM = 0; + const SAPI = 4; + + protected $messageType; + protected $expandNewlines; + + /** + * @param int $messageType Says where the error should go. + * @param int $level The minimum logging level at which this handler will be triggered + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + * @param bool $expandNewlines If set to true, newlines in the message will be expanded to be take multiple log entries + */ + public function __construct($messageType = self::OPERATING_SYSTEM, $level = Logger::DEBUG, $bubble = true, $expandNewlines = false) + { + parent::__construct($level, $bubble); + + if (false === in_array($messageType, self::getAvailableTypes())) { + $message = sprintf('The given message type "%s" is not supported', print_r($messageType, true)); + throw new \InvalidArgumentException($message); + } + + $this->messageType = $messageType; + $this->expandNewlines = $expandNewlines; + } + + /** + * @return array With all available types + */ + public static function getAvailableTypes() + { + return array( + self::OPERATING_SYSTEM, + self::SAPI, + ); + } + + /** + * {@inheritDoc} + */ + protected function getDefaultFormatter() + { + return new LineFormatter('[%datetime%] %channel%.%level_name%: %message% %context% %extra%'); + } + + /** + * {@inheritdoc} + */ + protected function write(array $record) + { + if ($this->expandNewlines) { + $lines = preg_split('{[\r\n]+}', (string) $record['formatted']); + foreach ($lines as $line) { + error_log($line, $this->messageType); + } + } else { + error_log((string) $record['formatted'], $this->messageType); + } + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/FilterHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/FilterHandler.php new file mode 100644 index 00000000..82b5f076 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/FilterHandler.php @@ -0,0 +1,172 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Logger; +use Monolog\Formatter\FormatterInterface; + +/** + * Simple handler wrapper that filters records based on a list of levels + * + * It can be configured with an exact list of levels to allow, or a min/max level. + * + * @author Hennadiy Verkh + * @author Jordi Boggiano + */ +class FilterHandler extends AbstractHandler +{ + /** + * Handler or factory callable($record, $this) + * + * @var callable|\Monolog\Handler\HandlerInterface + */ + protected $handler; + + /** + * Minimum level for logs that are passed to handler + * + * @var int[] + */ + protected $acceptedLevels; + + /** + * Whether the messages that are handled can bubble up the stack or not + * + * @var bool + */ + protected $bubble; + + /** + * @param callable|HandlerInterface $handler Handler or factory callable($record|null, $filterHandler). + * @param int|array $minLevelOrList A list of levels to accept or a minimum level if maxLevel is provided + * @param int $maxLevel Maximum level to accept, only used if $minLevelOrList is not an array + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + */ + public function __construct($handler, $minLevelOrList = Logger::DEBUG, $maxLevel = Logger::EMERGENCY, $bubble = true) + { + $this->handler = $handler; + $this->bubble = $bubble; + $this->setAcceptedLevels($minLevelOrList, $maxLevel); + + if (!$this->handler instanceof HandlerInterface && !is_callable($this->handler)) { + throw new \RuntimeException("The given handler (".json_encode($this->handler).") is not a callable nor a Monolog\Handler\HandlerInterface object"); + } + } + + /** + * @return array + */ + public function getAcceptedLevels() + { + return array_flip($this->acceptedLevels); + } + + /** + * @param int|string|array $minLevelOrList A list of levels to accept or a minimum level or level name if maxLevel is provided + * @param int|string $maxLevel Maximum level or level name to accept, only used if $minLevelOrList is not an array + */ + public function setAcceptedLevels($minLevelOrList = Logger::DEBUG, $maxLevel = Logger::EMERGENCY) + { + if (is_array($minLevelOrList)) { + $acceptedLevels = array_map('Monolog\Logger::toMonologLevel', $minLevelOrList); + } else { + $minLevelOrList = Logger::toMonologLevel($minLevelOrList); + $maxLevel = Logger::toMonologLevel($maxLevel); + $acceptedLevels = array_values(array_filter(Logger::getLevels(), function ($level) use ($minLevelOrList, $maxLevel) { + return $level >= $minLevelOrList && $level <= $maxLevel; + })); + } + $this->acceptedLevels = array_flip($acceptedLevels); + } + + /** + * {@inheritdoc} + */ + public function isHandling(array $record) + { + return isset($this->acceptedLevels[$record['level']]); + } + + /** + * {@inheritdoc} + */ + public function handle(array $record) + { + if (!$this->isHandling($record)) { + return false; + } + + if ($this->processors) { + foreach ($this->processors as $processor) { + $record = call_user_func($processor, $record); + } + } + + $this->getHandler($record)->handle($record); + + return false === $this->bubble; + } + + /** + * {@inheritdoc} + */ + public function handleBatch(array $records) + { + $filtered = array(); + foreach ($records as $record) { + if ($this->isHandling($record)) { + $filtered[] = $record; + } + } + + if (count($filtered) > 0) { + $this->getHandler($filtered[count($filtered) - 1])->handleBatch($filtered); + } + } + + /** + * Return the nested handler + * + * If the handler was provided as a factory callable, this will trigger the handler's instantiation. + * + * @return HandlerInterface + */ + public function getHandler(array $record = null) + { + if (!$this->handler instanceof HandlerInterface) { + $this->handler = call_user_func($this->handler, $record, $this); + if (!$this->handler instanceof HandlerInterface) { + throw new \RuntimeException("The factory callable should return a HandlerInterface"); + } + } + + return $this->handler; + } + + /** + * {@inheritdoc} + */ + public function setFormatter(FormatterInterface $formatter) + { + $this->getHandler()->setFormatter($formatter); + + return $this; + } + + /** + * {@inheritdoc} + */ + public function getFormatter() + { + return $this->getHandler()->getFormatter(); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/FingersCrossed/ActivationStrategyInterface.php b/vendor/monolog/monolog/src/Monolog/Handler/FingersCrossed/ActivationStrategyInterface.php new file mode 100644 index 00000000..3b0835a2 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/FingersCrossed/ActivationStrategyInterface.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler\FingersCrossed; + +/** + * Interface for activation strategies for the FingersCrossedHandler. + * + * @author Johannes M. Schmitt + */ +interface ActivationStrategyInterface +{ + /** + * Returns whether the given record activates the handler. + * + * @param array $record + * @return bool + */ + public function isHandlerActivated(array $record); +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/FingersCrossed/ChannelLevelActivationStrategy.php b/vendor/monolog/monolog/src/Monolog/Handler/FingersCrossed/ChannelLevelActivationStrategy.php new file mode 100644 index 00000000..0c57ea7a --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/FingersCrossed/ChannelLevelActivationStrategy.php @@ -0,0 +1,59 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler\FingersCrossed; + +use Monolog\Logger; + +/** + * Channel and Error level based monolog activation strategy. Allows to trigger activation + * based on level per channel. e.g. trigger activation on level 'ERROR' by default, except + * for records of the 'sql' channel; those should trigger activation on level 'WARN'. + * + * Example: + * + * + * $activationStrategy = new ChannelLevelActivationStrategy( + * Logger::CRITICAL, + * array( + * 'request' => Logger::ALERT, + * 'sensitive' => Logger::ERROR, + * ) + * ); + * $handler = new FingersCrossedHandler(new StreamHandler('php://stderr'), $activationStrategy); + * + * + * @author Mike Meessen + */ +class ChannelLevelActivationStrategy implements ActivationStrategyInterface +{ + private $defaultActionLevel; + private $channelToActionLevel; + + /** + * @param int $defaultActionLevel The default action level to be used if the record's category doesn't match any + * @param array $channelToActionLevel An array that maps channel names to action levels. + */ + public function __construct($defaultActionLevel, $channelToActionLevel = array()) + { + $this->defaultActionLevel = Logger::toMonologLevel($defaultActionLevel); + $this->channelToActionLevel = array_map('Monolog\Logger::toMonologLevel', $channelToActionLevel); + } + + public function isHandlerActivated(array $record) + { + if (isset($this->channelToActionLevel[$record['channel']])) { + return $record['level'] >= $this->channelToActionLevel[$record['channel']]; + } + + return $record['level'] >= $this->defaultActionLevel; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/FingersCrossed/ErrorLevelActivationStrategy.php b/vendor/monolog/monolog/src/Monolog/Handler/FingersCrossed/ErrorLevelActivationStrategy.php new file mode 100644 index 00000000..ee92c188 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/FingersCrossed/ErrorLevelActivationStrategy.php @@ -0,0 +1,34 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler\FingersCrossed; + +use Monolog\Logger; + +/** + * Error level based activation strategy. + * + * @author Johannes M. Schmitt + */ +class ErrorLevelActivationStrategy implements ActivationStrategyInterface +{ + private $actionLevel; + + public function __construct($actionLevel) + { + $this->actionLevel = Logger::toMonologLevel($actionLevel); + } + + public function isHandlerActivated(array $record) + { + return $record['level'] >= $this->actionLevel; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/FingersCrossedHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/FingersCrossedHandler.php new file mode 100644 index 00000000..4a9dc8f8 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/FingersCrossedHandler.php @@ -0,0 +1,207 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Handler\FingersCrossed\ErrorLevelActivationStrategy; +use Monolog\Handler\FingersCrossed\ActivationStrategyInterface; +use Monolog\Logger; +use Monolog\ResettableInterface; +use Monolog\Formatter\FormatterInterface; + +/** + * Buffers all records until a certain level is reached + * + * The advantage of this approach is that you don't get any clutter in your log files. + * Only requests which actually trigger an error (or whatever your actionLevel is) will be + * in the logs, but they will contain all records, not only those above the level threshold. + * + * You can find the various activation strategies in the + * Monolog\Handler\FingersCrossed\ namespace. + * + * @author Jordi Boggiano + */ +class FingersCrossedHandler extends AbstractHandler +{ + protected $handler; + protected $activationStrategy; + protected $buffering = true; + protected $bufferSize; + protected $buffer = array(); + protected $stopBuffering; + protected $passthruLevel; + + /** + * @param callable|HandlerInterface $handler Handler or factory callable($record|null, $fingersCrossedHandler). + * @param int|ActivationStrategyInterface $activationStrategy Strategy which determines when this handler takes action + * @param int $bufferSize How many entries should be buffered at most, beyond that the oldest items are removed from the buffer. + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + * @param bool $stopBuffering Whether the handler should stop buffering after being triggered (default true) + * @param int $passthruLevel Minimum level to always flush to handler on close, even if strategy not triggered + */ + public function __construct($handler, $activationStrategy = null, $bufferSize = 0, $bubble = true, $stopBuffering = true, $passthruLevel = null) + { + if (null === $activationStrategy) { + $activationStrategy = new ErrorLevelActivationStrategy(Logger::WARNING); + } + + // convert simple int activationStrategy to an object + if (!$activationStrategy instanceof ActivationStrategyInterface) { + $activationStrategy = new ErrorLevelActivationStrategy($activationStrategy); + } + + $this->handler = $handler; + $this->activationStrategy = $activationStrategy; + $this->bufferSize = $bufferSize; + $this->bubble = $bubble; + $this->stopBuffering = $stopBuffering; + + if ($passthruLevel !== null) { + $this->passthruLevel = Logger::toMonologLevel($passthruLevel); + } + + if (!$this->handler instanceof HandlerInterface && !is_callable($this->handler)) { + throw new \RuntimeException("The given handler (".json_encode($this->handler).") is not a callable nor a Monolog\Handler\HandlerInterface object"); + } + } + + /** + * {@inheritdoc} + */ + public function isHandling(array $record) + { + return true; + } + + /** + * Manually activate this logger regardless of the activation strategy + */ + public function activate() + { + if ($this->stopBuffering) { + $this->buffering = false; + } + $this->getHandler(end($this->buffer) ?: null)->handleBatch($this->buffer); + $this->buffer = array(); + } + + /** + * {@inheritdoc} + */ + public function handle(array $record) + { + if ($this->processors) { + foreach ($this->processors as $processor) { + $record = call_user_func($processor, $record); + } + } + + if ($this->buffering) { + $this->buffer[] = $record; + if ($this->bufferSize > 0 && count($this->buffer) > $this->bufferSize) { + array_shift($this->buffer); + } + if ($this->activationStrategy->isHandlerActivated($record)) { + $this->activate(); + } + } else { + $this->getHandler($record)->handle($record); + } + + return false === $this->bubble; + } + + /** + * {@inheritdoc} + */ + public function close() + { + $this->flushBuffer(); + } + + public function reset() + { + $this->flushBuffer(); + + parent::reset(); + + if ($this->getHandler() instanceof ResettableInterface) { + $this->getHandler()->reset(); + } + } + + /** + * Clears the buffer without flushing any messages down to the wrapped handler. + * + * It also resets the handler to its initial buffering state. + */ + public function clear() + { + $this->buffer = array(); + $this->reset(); + } + + /** + * Resets the state of the handler. Stops forwarding records to the wrapped handler. + */ + private function flushBuffer() + { + if (null !== $this->passthruLevel) { + $level = $this->passthruLevel; + $this->buffer = array_filter($this->buffer, function ($record) use ($level) { + return $record['level'] >= $level; + }); + if (count($this->buffer) > 0) { + $this->getHandler(end($this->buffer) ?: null)->handleBatch($this->buffer); + } + } + + $this->buffer = array(); + $this->buffering = true; + } + + /** + * Return the nested handler + * + * If the handler was provided as a factory callable, this will trigger the handler's instantiation. + * + * @return HandlerInterface + */ + public function getHandler(array $record = null) + { + if (!$this->handler instanceof HandlerInterface) { + $this->handler = call_user_func($this->handler, $record, $this); + if (!$this->handler instanceof HandlerInterface) { + throw new \RuntimeException("The factory callable should return a HandlerInterface"); + } + } + + return $this->handler; + } + + /** + * {@inheritdoc} + */ + public function setFormatter(FormatterInterface $formatter) + { + $this->getHandler()->setFormatter($formatter); + + return $this; + } + + /** + * {@inheritdoc} + */ + public function getFormatter() + { + return $this->getHandler()->getFormatter(); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/FirePHPHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/FirePHPHandler.php new file mode 100644 index 00000000..6903ab2a --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/FirePHPHandler.php @@ -0,0 +1,195 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Formatter\WildfireFormatter; + +/** + * Simple FirePHP Handler (http://www.firephp.org/), which uses the Wildfire protocol. + * + * @author Eric Clemmons (@ericclemmons) + */ +class FirePHPHandler extends AbstractProcessingHandler +{ + /** + * WildFire JSON header message format + */ + const PROTOCOL_URI = 'http://meta.wildfirehq.org/Protocol/JsonStream/0.2'; + + /** + * FirePHP structure for parsing messages & their presentation + */ + const STRUCTURE_URI = 'http://meta.firephp.org/Wildfire/Structure/FirePHP/FirebugConsole/0.1'; + + /** + * Must reference a "known" plugin, otherwise headers won't display in FirePHP + */ + const PLUGIN_URI = 'http://meta.firephp.org/Wildfire/Plugin/FirePHP/Library-FirePHPCore/0.3'; + + /** + * Header prefix for Wildfire to recognize & parse headers + */ + const HEADER_PREFIX = 'X-Wf'; + + /** + * Whether or not Wildfire vendor-specific headers have been generated & sent yet + */ + protected static $initialized = false; + + /** + * Shared static message index between potentially multiple handlers + * @var int + */ + protected static $messageIndex = 1; + + protected static $sendHeaders = true; + + /** + * Base header creation function used by init headers & record headers + * + * @param array $meta Wildfire Plugin, Protocol & Structure Indexes + * @param string $message Log message + * @return array Complete header string ready for the client as key and message as value + */ + protected function createHeader(array $meta, $message) + { + $header = sprintf('%s-%s', self::HEADER_PREFIX, join('-', $meta)); + + return array($header => $message); + } + + /** + * Creates message header from record + * + * @see createHeader() + * @param array $record + * @return string + */ + protected function createRecordHeader(array $record) + { + // Wildfire is extensible to support multiple protocols & plugins in a single request, + // but we're not taking advantage of that (yet), so we're using "1" for simplicity's sake. + return $this->createHeader( + array(1, 1, 1, self::$messageIndex++), + $record['formatted'] + ); + } + + /** + * {@inheritDoc} + */ + protected function getDefaultFormatter() + { + return new WildfireFormatter(); + } + + /** + * Wildfire initialization headers to enable message parsing + * + * @see createHeader() + * @see sendHeader() + * @return array + */ + protected function getInitHeaders() + { + // Initial payload consists of required headers for Wildfire + return array_merge( + $this->createHeader(array('Protocol', 1), self::PROTOCOL_URI), + $this->createHeader(array(1, 'Structure', 1), self::STRUCTURE_URI), + $this->createHeader(array(1, 'Plugin', 1), self::PLUGIN_URI) + ); + } + + /** + * Send header string to the client + * + * @param string $header + * @param string $content + */ + protected function sendHeader($header, $content) + { + if (!headers_sent() && self::$sendHeaders) { + header(sprintf('%s: %s', $header, $content)); + } + } + + /** + * Creates & sends header for a record, ensuring init headers have been sent prior + * + * @see sendHeader() + * @see sendInitHeaders() + * @param array $record + */ + protected function write(array $record) + { + if (!self::$sendHeaders) { + return; + } + + // WildFire-specific headers must be sent prior to any messages + if (!self::$initialized) { + self::$initialized = true; + + self::$sendHeaders = $this->headersAccepted(); + if (!self::$sendHeaders) { + return; + } + + foreach ($this->getInitHeaders() as $header => $content) { + $this->sendHeader($header, $content); + } + } + + $header = $this->createRecordHeader($record); + if (trim(current($header)) !== '') { + $this->sendHeader(key($header), current($header)); + } + } + + /** + * Verifies if the headers are accepted by the current user agent + * + * @return bool + */ + protected function headersAccepted() + { + if (!empty($_SERVER['HTTP_USER_AGENT']) && preg_match('{\bFirePHP/\d+\.\d+\b}', $_SERVER['HTTP_USER_AGENT'])) { + return true; + } + + return isset($_SERVER['HTTP_X_FIREPHP_VERSION']); + } + + /** + * BC getter for the sendHeaders property that has been made static + */ + public function __get($property) + { + if ('sendHeaders' !== $property) { + throw new \InvalidArgumentException('Undefined property '.$property); + } + + return static::$sendHeaders; + } + + /** + * BC setter for the sendHeaders property that has been made static + */ + public function __set($property, $value) + { + if ('sendHeaders' !== $property) { + throw new \InvalidArgumentException('Undefined property '.$property); + } + + static::$sendHeaders = $value; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/FleepHookHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/FleepHookHandler.php new file mode 100644 index 00000000..cd4892e8 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/FleepHookHandler.php @@ -0,0 +1,126 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Formatter\LineFormatter; +use Monolog\Logger; + +/** + * Sends logs to Fleep.io using Webhook integrations + * + * You'll need a Fleep.io account to use this handler. + * + * @see https://fleep.io/integrations/webhooks/ Fleep Webhooks Documentation + * @author Ando Roots + */ +class FleepHookHandler extends SocketHandler +{ + const FLEEP_HOST = 'fleep.io'; + + const FLEEP_HOOK_URI = '/hook/'; + + /** + * @var string Webhook token (specifies the conversation where logs are sent) + */ + protected $token; + + /** + * Construct a new Fleep.io Handler. + * + * For instructions on how to create a new web hook in your conversations + * see https://fleep.io/integrations/webhooks/ + * + * @param string $token Webhook token + * @param bool|int $level The minimum logging level at which this handler will be triggered + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + * @throws MissingExtensionException + */ + public function __construct($token, $level = Logger::DEBUG, $bubble = true) + { + if (!extension_loaded('openssl')) { + throw new MissingExtensionException('The OpenSSL PHP extension is required to use the FleepHookHandler'); + } + + $this->token = $token; + + $connectionString = 'ssl://' . self::FLEEP_HOST . ':443'; + parent::__construct($connectionString, $level, $bubble); + } + + /** + * Returns the default formatter to use with this handler + * + * Overloaded to remove empty context and extra arrays from the end of the log message. + * + * @return LineFormatter + */ + protected function getDefaultFormatter() + { + return new LineFormatter(null, null, true, true); + } + + /** + * Handles a log record + * + * @param array $record + */ + public function write(array $record) + { + parent::write($record); + $this->closeSocket(); + } + + /** + * {@inheritdoc} + * + * @param array $record + * @return string + */ + protected function generateDataStream($record) + { + $content = $this->buildContent($record); + + return $this->buildHeader($content) . $content; + } + + /** + * Builds the header of the API Call + * + * @param string $content + * @return string + */ + private function buildHeader($content) + { + $header = "POST " . self::FLEEP_HOOK_URI . $this->token . " HTTP/1.1\r\n"; + $header .= "Host: " . self::FLEEP_HOST . "\r\n"; + $header .= "Content-Type: application/x-www-form-urlencoded\r\n"; + $header .= "Content-Length: " . strlen($content) . "\r\n"; + $header .= "\r\n"; + + return $header; + } + + /** + * Builds the body of API call + * + * @param array $record + * @return string + */ + private function buildContent($record) + { + $dataArray = array( + 'message' => $record['formatted'], + ); + + return http_build_query($dataArray); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/FlowdockHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/FlowdockHandler.php new file mode 100644 index 00000000..c582863f --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/FlowdockHandler.php @@ -0,0 +1,128 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Logger; +use Monolog\Utils; +use Monolog\Formatter\FlowdockFormatter; +use Monolog\Formatter\FormatterInterface; + +/** + * Sends notifications through the Flowdock push API + * + * This must be configured with a FlowdockFormatter instance via setFormatter() + * + * Notes: + * API token - Flowdock API token + * + * @author Dominik Liebler + * @see https://www.flowdock.com/api/push + */ +class FlowdockHandler extends SocketHandler +{ + /** + * @var string + */ + protected $apiToken; + + /** + * @param string $apiToken + * @param bool|int $level The minimum logging level at which this handler will be triggered + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + * + * @throws MissingExtensionException if OpenSSL is missing + */ + public function __construct($apiToken, $level = Logger::DEBUG, $bubble = true) + { + if (!extension_loaded('openssl')) { + throw new MissingExtensionException('The OpenSSL PHP extension is required to use the FlowdockHandler'); + } + + parent::__construct('ssl://api.flowdock.com:443', $level, $bubble); + $this->apiToken = $apiToken; + } + + /** + * {@inheritdoc} + */ + public function setFormatter(FormatterInterface $formatter) + { + if (!$formatter instanceof FlowdockFormatter) { + throw new \InvalidArgumentException('The FlowdockHandler requires an instance of Monolog\Formatter\FlowdockFormatter to function correctly'); + } + + return parent::setFormatter($formatter); + } + + /** + * Gets the default formatter. + * + * @return FormatterInterface + */ + protected function getDefaultFormatter() + { + throw new \InvalidArgumentException('The FlowdockHandler must be configured (via setFormatter) with an instance of Monolog\Formatter\FlowdockFormatter to function correctly'); + } + + /** + * {@inheritdoc} + * + * @param array $record + */ + protected function write(array $record) + { + parent::write($record); + + $this->closeSocket(); + } + + /** + * {@inheritdoc} + * + * @param array $record + * @return string + */ + protected function generateDataStream($record) + { + $content = $this->buildContent($record); + + return $this->buildHeader($content) . $content; + } + + /** + * Builds the body of API call + * + * @param array $record + * @return string + */ + private function buildContent($record) + { + return Utils::jsonEncode($record['formatted']['flowdock']); + } + + /** + * Builds the header of the API Call + * + * @param string $content + * @return string + */ + private function buildHeader($content) + { + $header = "POST /v1/messages/team_inbox/" . $this->apiToken . " HTTP/1.1\r\n"; + $header .= "Host: api.flowdock.com\r\n"; + $header .= "Content-Type: application/json\r\n"; + $header .= "Content-Length: " . strlen($content) . "\r\n"; + $header .= "\r\n"; + + return $header; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/FormattableHandlerInterface.php b/vendor/monolog/monolog/src/Monolog/Handler/FormattableHandlerInterface.php new file mode 100644 index 00000000..f10a1131 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/FormattableHandlerInterface.php @@ -0,0 +1,39 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Formatter\FormatterInterface; + +/** + * Interface to describe loggers that have a formatter + * + * This interface is present in monolog 1.x to ease forward compatibility. + * + * @author Jordi Boggiano + */ +interface FormattableHandlerInterface +{ + /** + * Sets the formatter. + * + * @param FormatterInterface $formatter + * @return HandlerInterface self + */ + public function setFormatter(FormatterInterface $formatter): HandlerInterface; + + /** + * Gets the formatter. + * + * @return FormatterInterface + */ + public function getFormatter(): FormatterInterface; +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/FormattableHandlerTrait.php b/vendor/monolog/monolog/src/Monolog/Handler/FormattableHandlerTrait.php new file mode 100644 index 00000000..73c4d6d8 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/FormattableHandlerTrait.php @@ -0,0 +1,63 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Formatter\FormatterInterface; +use Monolog\Formatter\LineFormatter; + +/** + * Helper trait for implementing FormattableInterface + * + * This trait is present in monolog 1.x to ease forward compatibility. + * + * @author Jordi Boggiano + */ +trait FormattableHandlerTrait +{ + /** + * @var FormatterInterface + */ + protected $formatter; + + /** + * {@inheritdoc} + * @suppress PhanTypeMismatchReturn + */ + public function setFormatter(FormatterInterface $formatter): HandlerInterface + { + $this->formatter = $formatter; + + return $this; + } + + /** + * {@inheritdoc} + */ + public function getFormatter(): FormatterInterface + { + if (!$this->formatter) { + $this->formatter = $this->getDefaultFormatter(); + } + + return $this->formatter; + } + + /** + * Gets the default formatter. + * + * Overwrite this if the LineFormatter is not a good default for your handler. + */ + protected function getDefaultFormatter(): FormatterInterface + { + return new LineFormatter(); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/GelfHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/GelfHandler.php new file mode 100644 index 00000000..0e8a78f4 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/GelfHandler.php @@ -0,0 +1,65 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Gelf\IMessagePublisher; +use Gelf\PublisherInterface; +use Gelf\Publisher; +use InvalidArgumentException; +use Monolog\Logger; +use Monolog\Formatter\GelfMessageFormatter; + +/** + * Handler to send messages to a Graylog2 (http://www.graylog2.org) server + * + * @author Matt Lehner + * @author Benjamin Zikarsky + */ +class GelfHandler extends AbstractProcessingHandler +{ + /** + * @var Publisher the publisher object that sends the message to the server + */ + protected $publisher; + + /** + * @param PublisherInterface|IMessagePublisher|Publisher $publisher a publisher object + * @param int $level The minimum logging level at which this handler will be triggered + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + */ + public function __construct($publisher, $level = Logger::DEBUG, $bubble = true) + { + parent::__construct($level, $bubble); + + if (!$publisher instanceof Publisher && !$publisher instanceof IMessagePublisher && !$publisher instanceof PublisherInterface) { + throw new InvalidArgumentException('Invalid publisher, expected a Gelf\Publisher, Gelf\IMessagePublisher or Gelf\PublisherInterface instance'); + } + + $this->publisher = $publisher; + } + + /** + * {@inheritdoc} + */ + protected function write(array $record) + { + $this->publisher->publish($record['formatted']); + } + + /** + * {@inheritDoc} + */ + protected function getDefaultFormatter() + { + return new GelfMessageFormatter(); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/GroupHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/GroupHandler.php new file mode 100644 index 00000000..6ef362c3 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/GroupHandler.php @@ -0,0 +1,117 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Formatter\FormatterInterface; +use Monolog\ResettableInterface; + +/** + * Forwards records to multiple handlers + * + * @author Lenar Lõhmus + */ +class GroupHandler extends AbstractHandler +{ + protected $handlers; + + /** + * @param array $handlers Array of Handlers. + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + */ + public function __construct(array $handlers, $bubble = true) + { + foreach ($handlers as $handler) { + if (!$handler instanceof HandlerInterface) { + throw new \InvalidArgumentException('The first argument of the GroupHandler must be an array of HandlerInterface instances.'); + } + } + + $this->handlers = $handlers; + $this->bubble = $bubble; + } + + /** + * {@inheritdoc} + */ + public function isHandling(array $record) + { + foreach ($this->handlers as $handler) { + if ($handler->isHandling($record)) { + return true; + } + } + + return false; + } + + /** + * {@inheritdoc} + */ + public function handle(array $record) + { + if ($this->processors) { + foreach ($this->processors as $processor) { + $record = call_user_func($processor, $record); + } + } + + foreach ($this->handlers as $handler) { + $handler->handle($record); + } + + return false === $this->bubble; + } + + /** + * {@inheritdoc} + */ + public function handleBatch(array $records) + { + if ($this->processors) { + $processed = array(); + foreach ($records as $record) { + foreach ($this->processors as $processor) { + $record = call_user_func($processor, $record); + } + $processed[] = $record; + } + $records = $processed; + } + + foreach ($this->handlers as $handler) { + $handler->handleBatch($records); + } + } + + public function reset() + { + parent::reset(); + + foreach ($this->handlers as $handler) { + if ($handler instanceof ResettableInterface) { + $handler->reset(); + } + } + } + + /** + * {@inheritdoc} + */ + public function setFormatter(FormatterInterface $formatter) + { + foreach ($this->handlers as $handler) { + $handler->setFormatter($formatter); + } + + return $this; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/HandlerInterface.php b/vendor/monolog/monolog/src/Monolog/Handler/HandlerInterface.php new file mode 100644 index 00000000..1365efa0 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/HandlerInterface.php @@ -0,0 +1,90 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Formatter\FormatterInterface; + +/** + * Interface that all Monolog Handlers must implement + * + * @author Jordi Boggiano + */ +interface HandlerInterface +{ + /** + * Checks whether the given record will be handled by this handler. + * + * This is mostly done for performance reasons, to avoid calling processors for nothing. + * + * Handlers should still check the record levels within handle(), returning false in isHandling() + * is no guarantee that handle() will not be called, and isHandling() might not be called + * for a given record. + * + * @param array $record Partial log record containing only a level key + * + * @return bool + */ + public function isHandling(array $record); + + /** + * Handles a record. + * + * All records may be passed to this method, and the handler should discard + * those that it does not want to handle. + * + * The return value of this function controls the bubbling process of the handler stack. + * Unless the bubbling is interrupted (by returning true), the Logger class will keep on + * calling further handlers in the stack with a given log record. + * + * @param array $record The record to handle + * @return bool true means that this handler handled the record, and that bubbling is not permitted. + * false means the record was either not processed or that this handler allows bubbling. + */ + public function handle(array $record); + + /** + * Handles a set of records at once. + * + * @param array $records The records to handle (an array of record arrays) + */ + public function handleBatch(array $records); + + /** + * Adds a processor in the stack. + * + * @param callable $callback + * @return self + */ + public function pushProcessor($callback); + + /** + * Removes the processor on top of the stack and returns it. + * + * @return callable + */ + public function popProcessor(); + + /** + * Sets the formatter. + * + * @param FormatterInterface $formatter + * @return self + */ + public function setFormatter(FormatterInterface $formatter); + + /** + * Gets the formatter. + * + * @return FormatterInterface + */ + public function getFormatter(); +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/HandlerWrapper.php b/vendor/monolog/monolog/src/Monolog/Handler/HandlerWrapper.php new file mode 100644 index 00000000..872b0a67 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/HandlerWrapper.php @@ -0,0 +1,116 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\ResettableInterface; +use Monolog\Formatter\FormatterInterface; + +/** + * This simple wrapper class can be used to extend handlers functionality. + * + * Example: A custom filtering that can be applied to any handler. + * + * Inherit from this class and override handle() like this: + * + * public function handle(array $record) + * { + * if ($record meets certain conditions) { + * return false; + * } + * return $this->handler->handle($record); + * } + * + * @author Alexey Karapetov + */ +class HandlerWrapper implements HandlerInterface, ResettableInterface +{ + /** + * @var HandlerInterface + */ + protected $handler; + + /** + * HandlerWrapper constructor. + * @param HandlerInterface $handler + */ + public function __construct(HandlerInterface $handler) + { + $this->handler = $handler; + } + + /** + * {@inheritdoc} + */ + public function isHandling(array $record) + { + return $this->handler->isHandling($record); + } + + /** + * {@inheritdoc} + */ + public function handle(array $record) + { + return $this->handler->handle($record); + } + + /** + * {@inheritdoc} + */ + public function handleBatch(array $records) + { + return $this->handler->handleBatch($records); + } + + /** + * {@inheritdoc} + */ + public function pushProcessor($callback) + { + $this->handler->pushProcessor($callback); + + return $this; + } + + /** + * {@inheritdoc} + */ + public function popProcessor() + { + return $this->handler->popProcessor(); + } + + /** + * {@inheritdoc} + */ + public function setFormatter(FormatterInterface $formatter) + { + $this->handler->setFormatter($formatter); + + return $this; + } + + /** + * {@inheritdoc} + */ + public function getFormatter() + { + return $this->handler->getFormatter(); + } + + public function reset() + { + if ($this->handler instanceof ResettableInterface) { + return $this->handler->reset(); + } + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/HipChatHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/HipChatHandler.php new file mode 100644 index 00000000..bd0766b9 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/HipChatHandler.php @@ -0,0 +1,367 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Logger; + +/** + * Sends notifications through the hipchat api to a hipchat room + * + * Notes: + * API token - HipChat API token + * Room - HipChat Room Id or name, where messages are sent + * Name - Name used to send the message (from) + * notify - Should the message trigger a notification in the clients + * version - The API version to use (HipChatHandler::API_V1 | HipChatHandler::API_V2) + * + * @author Rafael Dohms + * @see https://www.hipchat.com/docs/api + */ +class HipChatHandler extends SocketHandler +{ + /** + * Use API version 1 + */ + const API_V1 = 'v1'; + + /** + * Use API version v2 + */ + const API_V2 = 'v2'; + + /** + * The maximum allowed length for the name used in the "from" field. + */ + const MAXIMUM_NAME_LENGTH = 15; + + /** + * The maximum allowed length for the message. + */ + const MAXIMUM_MESSAGE_LENGTH = 9500; + + /** + * @var string + */ + private $token; + + /** + * @var string + */ + private $room; + + /** + * @var string + */ + private $name; + + /** + * @var bool + */ + private $notify; + + /** + * @var string + */ + private $format; + + /** + * @var string + */ + private $host; + + /** + * @var string + */ + private $version; + + /** + * @param string $token HipChat API Token + * @param string $room The room that should be alerted of the message (Id or Name) + * @param string $name Name used in the "from" field. + * @param bool $notify Trigger a notification in clients or not + * @param int $level The minimum logging level at which this handler will be triggered + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + * @param bool $useSSL Whether to connect via SSL. + * @param string $format The format of the messages (default to text, can be set to html if you have html in the messages) + * @param string $host The HipChat server hostname. + * @param string $version The HipChat API version (default HipChatHandler::API_V1) + */ + public function __construct($token, $room, $name = 'Monolog', $notify = false, $level = Logger::CRITICAL, $bubble = true, $useSSL = true, $format = 'text', $host = 'api.hipchat.com', $version = self::API_V1) + { + @trigger_error('The Monolog\Handler\HipChatHandler class is deprecated. You should migrate to Slack and the SlackWebhookHandler / SlackbotHandler, see https://www.atlassian.com/partnerships/slack', E_USER_DEPRECATED); + + if ($version == self::API_V1 && !$this->validateStringLength($name, static::MAXIMUM_NAME_LENGTH)) { + throw new \InvalidArgumentException('The supplied name is too long. HipChat\'s v1 API supports names up to 15 UTF-8 characters.'); + } + + $connectionString = $useSSL ? 'ssl://'.$host.':443' : $host.':80'; + parent::__construct($connectionString, $level, $bubble); + + $this->token = $token; + $this->name = $name; + $this->notify = $notify; + $this->room = $room; + $this->format = $format; + $this->host = $host; + $this->version = $version; + } + + /** + * {@inheritdoc} + * + * @param array $record + * @return string + */ + protected function generateDataStream($record) + { + $content = $this->buildContent($record); + + return $this->buildHeader($content) . $content; + } + + /** + * Builds the body of API call + * + * @param array $record + * @return string + */ + private function buildContent($record) + { + $dataArray = array( + 'notify' => $this->version == self::API_V1 ? + ($this->notify ? 1 : 0) : + ($this->notify ? 'true' : 'false'), + 'message' => $record['formatted'], + 'message_format' => $this->format, + 'color' => $this->getAlertColor($record['level']), + ); + + if (!$this->validateStringLength($dataArray['message'], static::MAXIMUM_MESSAGE_LENGTH)) { + if (function_exists('mb_substr')) { + $dataArray['message'] = mb_substr($dataArray['message'], 0, static::MAXIMUM_MESSAGE_LENGTH).' [truncated]'; + } else { + $dataArray['message'] = substr($dataArray['message'], 0, static::MAXIMUM_MESSAGE_LENGTH).' [truncated]'; + } + } + + // if we are using the legacy API then we need to send some additional information + if ($this->version == self::API_V1) { + $dataArray['room_id'] = $this->room; + } + + // append the sender name if it is set + // always append it if we use the v1 api (it is required in v1) + if ($this->version == self::API_V1 || $this->name !== null) { + $dataArray['from'] = (string) $this->name; + } + + return http_build_query($dataArray); + } + + /** + * Builds the header of the API Call + * + * @param string $content + * @return string + */ + private function buildHeader($content) + { + if ($this->version == self::API_V1) { + $header = "POST /v1/rooms/message?format=json&auth_token={$this->token} HTTP/1.1\r\n"; + } else { + // needed for rooms with special (spaces, etc) characters in the name + $room = rawurlencode($this->room); + $header = "POST /v2/room/{$room}/notification?auth_token={$this->token} HTTP/1.1\r\n"; + } + + $header .= "Host: {$this->host}\r\n"; + $header .= "Content-Type: application/x-www-form-urlencoded\r\n"; + $header .= "Content-Length: " . strlen($content) . "\r\n"; + $header .= "\r\n"; + + return $header; + } + + /** + * Assigns a color to each level of log records. + * + * @param int $level + * @return string + */ + protected function getAlertColor($level) + { + switch (true) { + case $level >= Logger::ERROR: + return 'red'; + case $level >= Logger::WARNING: + return 'yellow'; + case $level >= Logger::INFO: + return 'green'; + case $level == Logger::DEBUG: + return 'gray'; + default: + return 'yellow'; + } + } + + /** + * {@inheritdoc} + * + * @param array $record + */ + protected function write(array $record) + { + parent::write($record); + $this->finalizeWrite(); + } + + /** + * Finalizes the request by reading some bytes and then closing the socket + * + * If we do not read some but close the socket too early, hipchat sometimes + * drops the request entirely. + */ + protected function finalizeWrite() + { + $res = $this->getResource(); + if (is_resource($res)) { + @fread($res, 2048); + } + $this->closeSocket(); + } + + /** + * {@inheritdoc} + */ + public function handleBatch(array $records) + { + if (count($records) == 0) { + return true; + } + + $batchRecords = $this->combineRecords($records); + + $handled = false; + foreach ($batchRecords as $batchRecord) { + if ($this->isHandling($batchRecord)) { + $this->write($batchRecord); + $handled = true; + } + } + + if (!$handled) { + return false; + } + + return false === $this->bubble; + } + + /** + * Combines multiple records into one. Error level of the combined record + * will be the highest level from the given records. Datetime will be taken + * from the first record. + * + * @param $records + * @return array + */ + private function combineRecords($records) + { + $batchRecord = null; + $batchRecords = array(); + $messages = array(); + $formattedMessages = array(); + $level = 0; + $levelName = null; + $datetime = null; + + foreach ($records as $record) { + $record = $this->processRecord($record); + + if ($record['level'] > $level) { + $level = $record['level']; + $levelName = $record['level_name']; + } + + if (null === $datetime) { + $datetime = $record['datetime']; + } + + $messages[] = $record['message']; + $messageStr = implode(PHP_EOL, $messages); + $formattedMessages[] = $this->getFormatter()->format($record); + $formattedMessageStr = implode('', $formattedMessages); + + $batchRecord = array( + 'message' => $messageStr, + 'formatted' => $formattedMessageStr, + 'context' => array(), + 'extra' => array(), + ); + + if (!$this->validateStringLength($batchRecord['formatted'], static::MAXIMUM_MESSAGE_LENGTH)) { + // Pop the last message and implode the remaining messages + $lastMessage = array_pop($messages); + $lastFormattedMessage = array_pop($formattedMessages); + $batchRecord['message'] = implode(PHP_EOL, $messages); + $batchRecord['formatted'] = implode('', $formattedMessages); + + $batchRecords[] = $batchRecord; + $messages = array($lastMessage); + $formattedMessages = array($lastFormattedMessage); + + $batchRecord = null; + } + } + + if (null !== $batchRecord) { + $batchRecords[] = $batchRecord; + } + + // Set the max level and datetime for all records + foreach ($batchRecords as &$batchRecord) { + $batchRecord = array_merge( + $batchRecord, + array( + 'level' => $level, + 'level_name' => $levelName, + 'datetime' => $datetime, + ) + ); + } + + return $batchRecords; + } + + /** + * Validates the length of a string. + * + * If the `mb_strlen()` function is available, it will use that, as HipChat + * allows UTF-8 characters. Otherwise, it will fall back to `strlen()`. + * + * Note that this might cause false failures in the specific case of using + * a valid name with less than 16 characters, but 16 or more bytes, on a + * system where `mb_strlen()` is unavailable. + * + * @param string $str + * @param int $length + * + * @return bool + */ + private function validateStringLength($str, $length) + { + if (function_exists('mb_strlen')) { + return (mb_strlen($str) <= $length); + } + + return (strlen($str) <= $length); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/IFTTTHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/IFTTTHandler.php new file mode 100644 index 00000000..487c5da3 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/IFTTTHandler.php @@ -0,0 +1,70 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Logger; +use Monolog\Utils; + +/** + * IFTTTHandler uses cURL to trigger IFTTT Maker actions + * + * Register a secret key and trigger/event name at https://ifttt.com/maker + * + * value1 will be the channel from monolog's Logger constructor, + * value2 will be the level name (ERROR, WARNING, ..) + * value3 will be the log record's message + * + * @author Nehal Patel + */ +class IFTTTHandler extends AbstractProcessingHandler +{ + private $eventName; + private $secretKey; + + /** + * @param string $eventName The name of the IFTTT Maker event that should be triggered + * @param string $secretKey A valid IFTTT secret key + * @param int $level The minimum logging level at which this handler will be triggered + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + */ + public function __construct($eventName, $secretKey, $level = Logger::ERROR, $bubble = true) + { + $this->eventName = $eventName; + $this->secretKey = $secretKey; + + parent::__construct($level, $bubble); + } + + /** + * {@inheritdoc} + */ + public function write(array $record) + { + $postData = array( + "value1" => $record["channel"], + "value2" => $record["level_name"], + "value3" => $record["message"], + ); + $postString = Utils::jsonEncode($postData); + + $ch = curl_init(); + curl_setopt($ch, CURLOPT_URL, "https://maker.ifttt.com/trigger/" . $this->eventName . "/with/key/" . $this->secretKey); + curl_setopt($ch, CURLOPT_POST, true); + curl_setopt($ch, CURLOPT_RETURNTRANSFER, true); + curl_setopt($ch, CURLOPT_POSTFIELDS, $postString); + curl_setopt($ch, CURLOPT_HTTPHEADER, array( + "Content-Type: application/json", + )); + + Curl\Util::execute($ch); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/InsightOpsHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/InsightOpsHandler.php new file mode 100644 index 00000000..680c7e6b --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/InsightOpsHandler.php @@ -0,0 +1,62 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + + namespace Monolog\Handler; + + use Monolog\Logger; + +/** + * Inspired on LogEntriesHandler. + * + * @author Robert Kaufmann III + * @author Gabriel Machado + */ +class InsightOpsHandler extends SocketHandler +{ + /** + * @var string + */ + protected $logToken; + + /** + * @param string $token Log token supplied by InsightOps + * @param string $region Region where InsightOps account is hosted. Could be 'us' or 'eu'. + * @param bool $useSSL Whether or not SSL encryption should be used + * @param int $level The minimum logging level to trigger this handler + * @param bool $bubble Whether or not messages that are handled should bubble up the stack. + * + * @throws MissingExtensionException If SSL encryption is set to true and OpenSSL is missing + */ + public function __construct($token, $region = 'us', $useSSL = true, $level = Logger::DEBUG, $bubble = true) + { + if ($useSSL && !extension_loaded('openssl')) { + throw new MissingExtensionException('The OpenSSL PHP plugin is required to use SSL encrypted connection for InsightOpsHandler'); + } + + $endpoint = $useSSL + ? 'ssl://' . $region . '.data.logs.insight.rapid7.com:443' + : $region . '.data.logs.insight.rapid7.com:80'; + + parent::__construct($endpoint, $level, $bubble); + $this->logToken = $token; + } + + /** + * {@inheritdoc} + * + * @param array $record + * @return string + */ + protected function generateDataStream($record) + { + return $this->logToken . ' ' . $record['formatted']; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/LogEntriesHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/LogEntriesHandler.php new file mode 100644 index 00000000..fd5d3eda --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/LogEntriesHandler.php @@ -0,0 +1,55 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Logger; + +/** + * @author Robert Kaufmann III + */ +class LogEntriesHandler extends SocketHandler +{ + /** + * @var string + */ + protected $logToken; + + /** + * @param string $token Log token supplied by LogEntries + * @param bool $useSSL Whether or not SSL encryption should be used. + * @param int $level The minimum logging level to trigger this handler + * @param bool $bubble Whether or not messages that are handled should bubble up the stack. + * + * @throws MissingExtensionException If SSL encryption is set to true and OpenSSL is missing + */ + public function __construct($token, $useSSL = true, $level = Logger::DEBUG, $bubble = true, $host = 'data.logentries.com') + { + if ($useSSL && !extension_loaded('openssl')) { + throw new MissingExtensionException('The OpenSSL PHP plugin is required to use SSL encrypted connection for LogEntriesHandler'); + } + + $endpoint = $useSSL ? 'ssl://' . $host . ':443' : $host . ':80'; + parent::__construct($endpoint, $level, $bubble); + $this->logToken = $token; + } + + /** + * {@inheritdoc} + * + * @param array $record + * @return string + */ + protected function generateDataStream($record) + { + return $this->logToken . ' ' . $record['formatted']; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/LogglyHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/LogglyHandler.php new file mode 100644 index 00000000..59ccbe59 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/LogglyHandler.php @@ -0,0 +1,102 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Logger; +use Monolog\Formatter\LogglyFormatter; + +/** + * Sends errors to Loggly. + * + * @author Przemek Sobstel + * @author Adam Pancutt + * @author Gregory Barchard + */ +class LogglyHandler extends AbstractProcessingHandler +{ + const HOST = 'logs-01.loggly.com'; + const ENDPOINT_SINGLE = 'inputs'; + const ENDPOINT_BATCH = 'bulk'; + + protected $token; + + protected $tag = array(); + + public function __construct($token, $level = Logger::DEBUG, $bubble = true) + { + if (!extension_loaded('curl')) { + throw new \LogicException('The curl extension is needed to use the LogglyHandler'); + } + + $this->token = $token; + + parent::__construct($level, $bubble); + } + + public function setTag($tag) + { + $tag = !empty($tag) ? $tag : array(); + $this->tag = is_array($tag) ? $tag : array($tag); + } + + public function addTag($tag) + { + if (!empty($tag)) { + $tag = is_array($tag) ? $tag : array($tag); + $this->tag = array_unique(array_merge($this->tag, $tag)); + } + } + + protected function write(array $record) + { + $this->send($record["formatted"], self::ENDPOINT_SINGLE); + } + + public function handleBatch(array $records) + { + $level = $this->level; + + $records = array_filter($records, function ($record) use ($level) { + return ($record['level'] >= $level); + }); + + if ($records) { + $this->send($this->getFormatter()->formatBatch($records), self::ENDPOINT_BATCH); + } + } + + protected function send($data, $endpoint) + { + $url = sprintf("https://%s/%s/%s/", self::HOST, $endpoint, $this->token); + + $headers = array('Content-Type: application/json'); + + if (!empty($this->tag)) { + $headers[] = 'X-LOGGLY-TAG: '.implode(',', $this->tag); + } + + $ch = curl_init(); + + curl_setopt($ch, CURLOPT_URL, $url); + curl_setopt($ch, CURLOPT_POST, true); + curl_setopt($ch, CURLOPT_POSTFIELDS, $data); + curl_setopt($ch, CURLOPT_HTTPHEADER, $headers); + curl_setopt($ch, CURLOPT_RETURNTRANSFER, true); + + Curl\Util::execute($ch); + } + + protected function getDefaultFormatter() + { + return new LogglyFormatter(); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/MailHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/MailHandler.php new file mode 100644 index 00000000..41d2e8b2 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/MailHandler.php @@ -0,0 +1,67 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +/** + * Base class for all mail handlers + * + * @author Gyula Sallai + */ +abstract class MailHandler extends AbstractProcessingHandler +{ + /** + * {@inheritdoc} + */ + public function handleBatch(array $records) + { + $messages = array(); + + foreach ($records as $record) { + if ($record['level'] < $this->level) { + continue; + } + $messages[] = $this->processRecord($record); + } + + if (!empty($messages)) { + $this->send((string) $this->getFormatter()->formatBatch($messages), $messages); + } + } + + /** + * Send a mail with the given content + * + * @param string $content formatted email body to be sent + * @param array $records the array of log records that formed this content + */ + abstract protected function send($content, array $records); + + /** + * {@inheritdoc} + */ + protected function write(array $record) + { + $this->send((string) $record['formatted'], array($record)); + } + + protected function getHighestRecord(array $records) + { + $highestRecord = null; + foreach ($records as $record) { + if ($highestRecord === null || $highestRecord['level'] < $record['level']) { + $highestRecord = $record; + } + } + + return $highestRecord; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/MandrillHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/MandrillHandler.php new file mode 100644 index 00000000..91adae63 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/MandrillHandler.php @@ -0,0 +1,68 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Logger; + +/** + * MandrillHandler uses cURL to send the emails to the Mandrill API + * + * @author Adam Nicholson + */ +class MandrillHandler extends MailHandler +{ + protected $message; + protected $apiKey; + + /** + * @param string $apiKey A valid Mandrill API key + * @param callable|\Swift_Message $message An example message for real messages, only the body will be replaced + * @param int $level The minimum logging level at which this handler will be triggered + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + */ + public function __construct($apiKey, $message, $level = Logger::ERROR, $bubble = true) + { + parent::__construct($level, $bubble); + + if (!$message instanceof \Swift_Message && is_callable($message)) { + $message = call_user_func($message); + } + if (!$message instanceof \Swift_Message) { + throw new \InvalidArgumentException('You must provide either a Swift_Message instance or a callable returning it'); + } + $this->message = $message; + $this->apiKey = $apiKey; + } + + /** + * {@inheritdoc} + */ + protected function send($content, array $records) + { + $message = clone $this->message; + $message->setBody($content); + $message->setDate(time()); + + $ch = curl_init(); + + curl_setopt($ch, CURLOPT_URL, 'https://mandrillapp.com/api/1.0/messages/send-raw.json'); + curl_setopt($ch, CURLOPT_POST, 1); + curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1); + curl_setopt($ch, CURLOPT_POSTFIELDS, http_build_query(array( + 'key' => $this->apiKey, + 'raw_message' => (string) $message, + 'async' => false, + ))); + + Curl\Util::execute($ch); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/MissingExtensionException.php b/vendor/monolog/monolog/src/Monolog/Handler/MissingExtensionException.php new file mode 100644 index 00000000..cce6d4af --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/MissingExtensionException.php @@ -0,0 +1,21 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +/** + * Exception can be thrown if an extension for an handler is missing + * + * @author Christian Bergau + */ +class MissingExtensionException extends \Exception +{ +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/MongoDBHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/MongoDBHandler.php new file mode 100644 index 00000000..46ae7b65 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/MongoDBHandler.php @@ -0,0 +1,59 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Logger; +use Monolog\Formatter\NormalizerFormatter; + +/** + * Logs to a MongoDB database. + * + * usage example: + * + * $log = new Logger('application'); + * $mongodb = new MongoDBHandler(new \Mongo("mongodb://localhost:27017"), "logs", "prod"); + * $log->pushHandler($mongodb); + * + * @author Thomas Tourlourat + */ +class MongoDBHandler extends AbstractProcessingHandler +{ + protected $mongoCollection; + + public function __construct($mongo, $database, $collection, $level = Logger::DEBUG, $bubble = true) + { + if (!($mongo instanceof \MongoClient || $mongo instanceof \Mongo || $mongo instanceof \MongoDB\Client)) { + throw new \InvalidArgumentException('MongoClient, Mongo or MongoDB\Client instance required'); + } + + $this->mongoCollection = $mongo->selectCollection($database, $collection); + + parent::__construct($level, $bubble); + } + + protected function write(array $record) + { + if ($this->mongoCollection instanceof \MongoDB\Collection) { + $this->mongoCollection->insertOne($record["formatted"]); + } else { + $this->mongoCollection->save($record["formatted"]); + } + } + + /** + * {@inheritDoc} + */ + protected function getDefaultFormatter() + { + return new NormalizerFormatter(); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/NativeMailerHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/NativeMailerHandler.php new file mode 100644 index 00000000..c90b940e --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/NativeMailerHandler.php @@ -0,0 +1,185 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Logger; +use Monolog\Formatter\LineFormatter; + +/** + * NativeMailerHandler uses the mail() function to send the emails + * + * @author Christophe Coevoet + * @author Mark Garrett + */ +class NativeMailerHandler extends MailHandler +{ + /** + * The email addresses to which the message will be sent + * @var array + */ + protected $to; + + /** + * The subject of the email + * @var string + */ + protected $subject; + + /** + * Optional headers for the message + * @var array + */ + protected $headers = array(); + + /** + * Optional parameters for the message + * @var array + */ + protected $parameters = array(); + + /** + * The wordwrap length for the message + * @var int + */ + protected $maxColumnWidth; + + /** + * The Content-type for the message + * @var string + */ + protected $contentType = 'text/plain'; + + /** + * The encoding for the message + * @var string + */ + protected $encoding = 'utf-8'; + + /** + * @param string|array $to The receiver of the mail + * @param string $subject The subject of the mail + * @param string $from The sender of the mail + * @param int $level The minimum logging level at which this handler will be triggered + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + * @param int $maxColumnWidth The maximum column width that the message lines will have + */ + public function __construct($to, $subject, $from, $level = Logger::ERROR, $bubble = true, $maxColumnWidth = 70) + { + parent::__construct($level, $bubble); + $this->to = is_array($to) ? $to : array($to); + $this->subject = $subject; + $this->addHeader(sprintf('From: %s', $from)); + $this->maxColumnWidth = $maxColumnWidth; + } + + /** + * Add headers to the message + * + * @param string|array $headers Custom added headers + * @return self + */ + public function addHeader($headers) + { + foreach ((array) $headers as $header) { + if (strpos($header, "\n") !== false || strpos($header, "\r") !== false) { + throw new \InvalidArgumentException('Headers can not contain newline characters for security reasons'); + } + $this->headers[] = $header; + } + + return $this; + } + + /** + * Add parameters to the message + * + * @param string|array $parameters Custom added parameters + * @return self + */ + public function addParameter($parameters) + { + $this->parameters = array_merge($this->parameters, (array) $parameters); + + return $this; + } + + /** + * {@inheritdoc} + */ + protected function send($content, array $records) + { + $content = wordwrap($content, $this->maxColumnWidth); + $headers = ltrim(implode("\r\n", $this->headers) . "\r\n", "\r\n"); + $headers .= 'Content-type: ' . $this->getContentType() . '; charset=' . $this->getEncoding() . "\r\n"; + if ($this->getContentType() == 'text/html' && false === strpos($headers, 'MIME-Version:')) { + $headers .= 'MIME-Version: 1.0' . "\r\n"; + } + + $subject = $this->subject; + if ($records) { + $subjectFormatter = new LineFormatter($this->subject); + $subject = $subjectFormatter->format($this->getHighestRecord($records)); + } + + $parameters = implode(' ', $this->parameters); + foreach ($this->to as $to) { + mail($to, $subject, $content, $headers, $parameters); + } + } + + /** + * @return string $contentType + */ + public function getContentType() + { + return $this->contentType; + } + + /** + * @return string $encoding + */ + public function getEncoding() + { + return $this->encoding; + } + + /** + * @param string $contentType The content type of the email - Defaults to text/plain. Use text/html for HTML + * messages. + * @return self + */ + public function setContentType($contentType) + { + if (strpos($contentType, "\n") !== false || strpos($contentType, "\r") !== false) { + throw new \InvalidArgumentException('The content type can not contain newline characters to prevent email header injection'); + } + + $this->contentType = $contentType; + + return $this; + } + + /** + * @param string $encoding + * @return self + */ + public function setEncoding($encoding) + { + if (strpos($encoding, "\n") !== false || strpos($encoding, "\r") !== false) { + throw new \InvalidArgumentException('The encoding can not contain newline characters to prevent email header injection'); + } + + $this->encoding = $encoding; + + return $this; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/NewRelicHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/NewRelicHandler.php new file mode 100644 index 00000000..0aed98f0 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/NewRelicHandler.php @@ -0,0 +1,205 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Logger; +use Monolog\Utils; +use Monolog\Formatter\NormalizerFormatter; + +/** + * Class to record a log on a NewRelic application. + * Enabling New Relic High Security mode may prevent capture of useful information. + * + * This handler requires a NormalizerFormatter to function and expects an array in $record['formatted'] + * + * @see https://docs.newrelic.com/docs/agents/php-agent + * @see https://docs.newrelic.com/docs/accounts-partnerships/accounts/security/high-security + */ +class NewRelicHandler extends AbstractProcessingHandler +{ + /** + * Name of the New Relic application that will receive logs from this handler. + * + * @var string + */ + protected $appName; + + /** + * Name of the current transaction + * + * @var string + */ + protected $transactionName; + + /** + * Some context and extra data is passed into the handler as arrays of values. Do we send them as is + * (useful if we are using the API), or explode them for display on the NewRelic RPM website? + * + * @var bool + */ + protected $explodeArrays; + + /** + * {@inheritDoc} + * + * @param string $appName + * @param bool $explodeArrays + * @param string $transactionName + */ + public function __construct( + $level = Logger::ERROR, + $bubble = true, + $appName = null, + $explodeArrays = false, + $transactionName = null + ) { + parent::__construct($level, $bubble); + + $this->appName = $appName; + $this->explodeArrays = $explodeArrays; + $this->transactionName = $transactionName; + } + + /** + * {@inheritDoc} + */ + protected function write(array $record) + { + if (!$this->isNewRelicEnabled()) { + throw new MissingExtensionException('The newrelic PHP extension is required to use the NewRelicHandler'); + } + + if ($appName = $this->getAppName($record['context'])) { + $this->setNewRelicAppName($appName); + } + + if ($transactionName = $this->getTransactionName($record['context'])) { + $this->setNewRelicTransactionName($transactionName); + unset($record['formatted']['context']['transaction_name']); + } + + if (isset($record['context']['exception']) && ($record['context']['exception'] instanceof \Exception || (PHP_VERSION_ID >= 70000 && $record['context']['exception'] instanceof \Throwable))) { + newrelic_notice_error($record['message'], $record['context']['exception']); + unset($record['formatted']['context']['exception']); + } else { + newrelic_notice_error($record['message']); + } + + if (isset($record['formatted']['context']) && is_array($record['formatted']['context'])) { + foreach ($record['formatted']['context'] as $key => $parameter) { + if (is_array($parameter) && $this->explodeArrays) { + foreach ($parameter as $paramKey => $paramValue) { + $this->setNewRelicParameter('context_' . $key . '_' . $paramKey, $paramValue); + } + } else { + $this->setNewRelicParameter('context_' . $key, $parameter); + } + } + } + + if (isset($record['formatted']['extra']) && is_array($record['formatted']['extra'])) { + foreach ($record['formatted']['extra'] as $key => $parameter) { + if (is_array($parameter) && $this->explodeArrays) { + foreach ($parameter as $paramKey => $paramValue) { + $this->setNewRelicParameter('extra_' . $key . '_' . $paramKey, $paramValue); + } + } else { + $this->setNewRelicParameter('extra_' . $key, $parameter); + } + } + } + } + + /** + * Checks whether the NewRelic extension is enabled in the system. + * + * @return bool + */ + protected function isNewRelicEnabled() + { + return extension_loaded('newrelic'); + } + + /** + * Returns the appname where this log should be sent. Each log can override the default appname, set in this + * handler's constructor, by providing the appname in it's context. + * + * @param array $context + * @return null|string + */ + protected function getAppName(array $context) + { + if (isset($context['appname'])) { + return $context['appname']; + } + + return $this->appName; + } + + /** + * Returns the name of the current transaction. Each log can override the default transaction name, set in this + * handler's constructor, by providing the transaction_name in it's context + * + * @param array $context + * + * @return null|string + */ + protected function getTransactionName(array $context) + { + if (isset($context['transaction_name'])) { + return $context['transaction_name']; + } + + return $this->transactionName; + } + + /** + * Sets the NewRelic application that should receive this log. + * + * @param string $appName + */ + protected function setNewRelicAppName($appName) + { + newrelic_set_appname($appName); + } + + /** + * Overwrites the name of the current transaction + * + * @param string $transactionName + */ + protected function setNewRelicTransactionName($transactionName) + { + newrelic_name_transaction($transactionName); + } + + /** + * @param string $key + * @param mixed $value + */ + protected function setNewRelicParameter($key, $value) + { + if (null === $value || is_scalar($value)) { + newrelic_add_custom_parameter($key, $value); + } else { + newrelic_add_custom_parameter($key, Utils::jsonEncode($value, null, true)); + } + } + + /** + * {@inheritDoc} + */ + protected function getDefaultFormatter() + { + return new NormalizerFormatter(); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/NullHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/NullHandler.php new file mode 100644 index 00000000..60322368 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/NullHandler.php @@ -0,0 +1,45 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Logger; + +/** + * Blackhole + * + * Any record it can handle will be thrown away. This can be used + * to put on top of an existing stack to override it temporarily. + * + * @author Jordi Boggiano + */ +class NullHandler extends AbstractHandler +{ + /** + * @param int $level The minimum logging level at which this handler will be triggered + */ + public function __construct($level = Logger::DEBUG) + { + parent::__construct($level, false); + } + + /** + * {@inheritdoc} + */ + public function handle(array $record) + { + if ($record['level'] < $this->level) { + return false; + } + + return true; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/PHPConsoleHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/PHPConsoleHandler.php new file mode 100644 index 00000000..3804fe54 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/PHPConsoleHandler.php @@ -0,0 +1,243 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Exception; +use Monolog\Formatter\LineFormatter; +use Monolog\Logger; +use Monolog\Utils; +use PhpConsole\Connector; +use PhpConsole\Handler; +use PhpConsole\Helper; + +/** + * Monolog handler for Google Chrome extension "PHP Console" + * + * Display PHP error/debug log messages in Google Chrome console and notification popups, executes PHP code remotely + * + * Usage: + * 1. Install Google Chrome extension https://chrome.google.com/webstore/detail/php-console/nfhmhhlpfleoednkpnnnkolmclajemef + * 2. See overview https://github.com/barbushin/php-console#overview + * 3. Install PHP Console library https://github.com/barbushin/php-console#installation + * 4. Example (result will looks like http://i.hizliresim.com/vg3Pz4.png) + * + * $logger = new \Monolog\Logger('all', array(new \Monolog\Handler\PHPConsoleHandler())); + * \Monolog\ErrorHandler::register($logger); + * echo $undefinedVar; + * $logger->addDebug('SELECT * FROM users', array('db', 'time' => 0.012)); + * PC::debug($_SERVER); // PHP Console debugger for any type of vars + * + * @author Sergey Barbushin https://www.linkedin.com/in/barbushin + */ +class PHPConsoleHandler extends AbstractProcessingHandler +{ + private $options = array( + 'enabled' => true, // bool Is PHP Console server enabled + 'classesPartialsTraceIgnore' => array('Monolog\\'), // array Hide calls of classes started with... + 'debugTagsKeysInContext' => array(0, 'tag'), // bool Is PHP Console server enabled + 'useOwnErrorsHandler' => false, // bool Enable errors handling + 'useOwnExceptionsHandler' => false, // bool Enable exceptions handling + 'sourcesBasePath' => null, // string Base path of all project sources to strip in errors source paths + 'registerHelper' => true, // bool Register PhpConsole\Helper that allows short debug calls like PC::debug($var, 'ta.g.s') + 'serverEncoding' => null, // string|null Server internal encoding + 'headersLimit' => null, // int|null Set headers size limit for your web-server + 'password' => null, // string|null Protect PHP Console connection by password + 'enableSslOnlyMode' => false, // bool Force connection by SSL for clients with PHP Console installed + 'ipMasks' => array(), // array Set IP masks of clients that will be allowed to connect to PHP Console: array('192.168.*.*', '127.0.0.1') + 'enableEvalListener' => false, // bool Enable eval request to be handled by eval dispatcher(if enabled, 'password' option is also required) + 'dumperDetectCallbacks' => false, // bool Convert callback items in dumper vars to (callback SomeClass::someMethod) strings + 'dumperLevelLimit' => 5, // int Maximum dumped vars array or object nested dump level + 'dumperItemsCountLimit' => 100, // int Maximum dumped var same level array items or object properties number + 'dumperItemSizeLimit' => 5000, // int Maximum length of any string or dumped array item + 'dumperDumpSizeLimit' => 500000, // int Maximum approximate size of dumped vars result formatted in JSON + 'detectDumpTraceAndSource' => false, // bool Autodetect and append trace data to debug + 'dataStorage' => null, // PhpConsole\Storage|null Fixes problem with custom $_SESSION handler(see http://goo.gl/Ne8juJ) + ); + + /** @var Connector */ + private $connector; + + /** + * @param array $options See \Monolog\Handler\PHPConsoleHandler::$options for more details + * @param Connector|null $connector Instance of \PhpConsole\Connector class (optional) + * @param int $level + * @param bool $bubble + * @throws Exception + */ + public function __construct(array $options = array(), Connector $connector = null, $level = Logger::DEBUG, $bubble = true) + { + if (!class_exists('PhpConsole\Connector')) { + throw new Exception('PHP Console library not found. See https://github.com/barbushin/php-console#installation'); + } + parent::__construct($level, $bubble); + $this->options = $this->initOptions($options); + $this->connector = $this->initConnector($connector); + } + + private function initOptions(array $options) + { + $wrongOptions = array_diff(array_keys($options), array_keys($this->options)); + if ($wrongOptions) { + throw new Exception('Unknown options: ' . implode(', ', $wrongOptions)); + } + + return array_replace($this->options, $options); + } + + private function initConnector(Connector $connector = null) + { + if (!$connector) { + if ($this->options['dataStorage']) { + Connector::setPostponeStorage($this->options['dataStorage']); + } + $connector = Connector::getInstance(); + } + + if ($this->options['registerHelper'] && !Helper::isRegistered()) { + Helper::register(); + } + + if ($this->options['enabled'] && $connector->isActiveClient()) { + if ($this->options['useOwnErrorsHandler'] || $this->options['useOwnExceptionsHandler']) { + $handler = Handler::getInstance(); + $handler->setHandleErrors($this->options['useOwnErrorsHandler']); + $handler->setHandleExceptions($this->options['useOwnExceptionsHandler']); + $handler->start(); + } + if ($this->options['sourcesBasePath']) { + $connector->setSourcesBasePath($this->options['sourcesBasePath']); + } + if ($this->options['serverEncoding']) { + $connector->setServerEncoding($this->options['serverEncoding']); + } + if ($this->options['password']) { + $connector->setPassword($this->options['password']); + } + if ($this->options['enableSslOnlyMode']) { + $connector->enableSslOnlyMode(); + } + if ($this->options['ipMasks']) { + $connector->setAllowedIpMasks($this->options['ipMasks']); + } + if ($this->options['headersLimit']) { + $connector->setHeadersLimit($this->options['headersLimit']); + } + if ($this->options['detectDumpTraceAndSource']) { + $connector->getDebugDispatcher()->detectTraceAndSource = true; + } + $dumper = $connector->getDumper(); + $dumper->levelLimit = $this->options['dumperLevelLimit']; + $dumper->itemsCountLimit = $this->options['dumperItemsCountLimit']; + $dumper->itemSizeLimit = $this->options['dumperItemSizeLimit']; + $dumper->dumpSizeLimit = $this->options['dumperDumpSizeLimit']; + $dumper->detectCallbacks = $this->options['dumperDetectCallbacks']; + if ($this->options['enableEvalListener']) { + $connector->startEvalRequestsListener(); + } + } + + return $connector; + } + + public function getConnector() + { + return $this->connector; + } + + public function getOptions() + { + return $this->options; + } + + public function handle(array $record) + { + if ($this->options['enabled'] && $this->connector->isActiveClient()) { + return parent::handle($record); + } + + return !$this->bubble; + } + + /** + * Writes the record down to the log of the implementing handler + * + * @param array $record + * @return void + */ + protected function write(array $record) + { + if ($record['level'] < Logger::NOTICE) { + $this->handleDebugRecord($record); + } elseif (isset($record['context']['exception']) && $record['context']['exception'] instanceof Exception) { + $this->handleExceptionRecord($record); + } else { + $this->handleErrorRecord($record); + } + } + + private function handleDebugRecord(array $record) + { + $tags = $this->getRecordTags($record); + $message = $record['message']; + if ($record['context']) { + $message .= ' ' . Utils::jsonEncode($this->connector->getDumper()->dump(array_filter($record['context'])), null, true); + } + $this->connector->getDebugDispatcher()->dispatchDebug($message, $tags, $this->options['classesPartialsTraceIgnore']); + } + + private function handleExceptionRecord(array $record) + { + $this->connector->getErrorsDispatcher()->dispatchException($record['context']['exception']); + } + + private function handleErrorRecord(array $record) + { + $context = $record['context']; + + $this->connector->getErrorsDispatcher()->dispatchError( + isset($context['code']) ? $context['code'] : null, + isset($context['message']) ? $context['message'] : $record['message'], + isset($context['file']) ? $context['file'] : null, + isset($context['line']) ? $context['line'] : null, + $this->options['classesPartialsTraceIgnore'] + ); + } + + private function getRecordTags(array &$record) + { + $tags = null; + if (!empty($record['context'])) { + $context = & $record['context']; + foreach ($this->options['debugTagsKeysInContext'] as $key) { + if (!empty($context[$key])) { + $tags = $context[$key]; + if ($key === 0) { + array_shift($context); + } else { + unset($context[$key]); + } + break; + } + } + } + + return $tags ?: strtolower($record['level_name']); + } + + /** + * {@inheritDoc} + */ + protected function getDefaultFormatter() + { + return new LineFormatter('%message%'); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/ProcessableHandlerInterface.php b/vendor/monolog/monolog/src/Monolog/Handler/ProcessableHandlerInterface.php new file mode 100644 index 00000000..35f41b80 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/ProcessableHandlerInterface.php @@ -0,0 +1,40 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Processor\ProcessorInterface; + +/** + * Interface to describe loggers that have processors + * + * This interface is present in monolog 1.x to ease forward compatibility. + * + * @author Jordi Boggiano + */ +interface ProcessableHandlerInterface +{ + /** + * Adds a processor in the stack. + * + * @param ProcessorInterface|callable $callback + * @return HandlerInterface self + */ + public function pushProcessor($callback): HandlerInterface; + + /** + * Removes the processor on top of the stack and returns it. + * + * @throws \LogicException In case the processor stack is empty + * @return callable + */ + public function popProcessor(): callable; +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/ProcessableHandlerTrait.php b/vendor/monolog/monolog/src/Monolog/Handler/ProcessableHandlerTrait.php new file mode 100644 index 00000000..cd58940b --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/ProcessableHandlerTrait.php @@ -0,0 +1,73 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\ResettableInterface; + +/** + * Helper trait for implementing ProcessableInterface + * + * This trait is present in monolog 1.x to ease forward compatibility. + * + * @author Jordi Boggiano + */ +trait ProcessableHandlerTrait +{ + /** + * @var callable[] + */ + protected $processors = []; + + /** + * {@inheritdoc} + * @suppress PhanTypeMismatchReturn + */ + public function pushProcessor($callback): HandlerInterface + { + array_unshift($this->processors, $callback); + + return $this; + } + + /** + * {@inheritdoc} + */ + public function popProcessor(): callable + { + if (!$this->processors) { + throw new \LogicException('You tried to pop from an empty processor stack.'); + } + + return array_shift($this->processors); + } + + /** + * Processes a record. + */ + protected function processRecord(array $record): array + { + foreach ($this->processors as $processor) { + $record = $processor($record); + } + + return $record; + } + + protected function resetProcessors(): void + { + foreach ($this->processors as $processor) { + if ($processor instanceof ResettableInterface) { + $processor->reset(); + } + } + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/PsrHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/PsrHandler.php new file mode 100644 index 00000000..bb819d56 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/PsrHandler.php @@ -0,0 +1,56 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Logger; +use Psr\Log\LoggerInterface; + +/** + * Proxies log messages to an existing PSR-3 compliant logger. + * + * @author Michael Moussa + */ +class PsrHandler extends AbstractHandler +{ + /** + * PSR-3 compliant logger + * + * @var LoggerInterface + */ + protected $logger; + + /** + * @param LoggerInterface $logger The underlying PSR-3 compliant logger to which messages will be proxied + * @param int $level The minimum logging level at which this handler will be triggered + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + */ + public function __construct(LoggerInterface $logger, $level = Logger::DEBUG, $bubble = true) + { + parent::__construct($level, $bubble); + + $this->logger = $logger; + } + + /** + * {@inheritDoc} + */ + public function handle(array $record) + { + if (!$this->isHandling($record)) { + return false; + } + + $this->logger->log(strtolower($record['level_name']), $record['message'], $record['context']); + + return false === $this->bubble; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/PushoverHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/PushoverHandler.php new file mode 100644 index 00000000..46faa6d0 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/PushoverHandler.php @@ -0,0 +1,185 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Logger; + +/** + * Sends notifications through the pushover api to mobile phones + * + * @author Sebastian Göttschkes + * @see https://www.pushover.net/api + */ +class PushoverHandler extends SocketHandler +{ + private $token; + private $users; + private $title; + private $user; + private $retry; + private $expire; + + private $highPriorityLevel; + private $emergencyLevel; + private $useFormattedMessage = false; + + /** + * All parameters that can be sent to Pushover + * @see https://pushover.net/api + * @var array + */ + private $parameterNames = array( + 'token' => true, + 'user' => true, + 'message' => true, + 'device' => true, + 'title' => true, + 'url' => true, + 'url_title' => true, + 'priority' => true, + 'timestamp' => true, + 'sound' => true, + 'retry' => true, + 'expire' => true, + 'callback' => true, + ); + + /** + * Sounds the api supports by default + * @see https://pushover.net/api#sounds + * @var array + */ + private $sounds = array( + 'pushover', 'bike', 'bugle', 'cashregister', 'classical', 'cosmic', 'falling', 'gamelan', 'incoming', + 'intermission', 'magic', 'mechanical', 'pianobar', 'siren', 'spacealarm', 'tugboat', 'alien', 'climb', + 'persistent', 'echo', 'updown', 'none', + ); + + /** + * @param string $token Pushover api token + * @param string|array $users Pushover user id or array of ids the message will be sent to + * @param string $title Title sent to the Pushover API + * @param int $level The minimum logging level at which this handler will be triggered + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + * @param bool $useSSL Whether to connect via SSL. Required when pushing messages to users that are not + * the pushover.net app owner. OpenSSL is required for this option. + * @param int $highPriorityLevel The minimum logging level at which this handler will start + * sending "high priority" requests to the Pushover API + * @param int $emergencyLevel The minimum logging level at which this handler will start + * sending "emergency" requests to the Pushover API + * @param int $retry The retry parameter specifies how often (in seconds) the Pushover servers will send the same notification to the user. + * @param int $expire The expire parameter specifies how many seconds your notification will continue to be retried for (every retry seconds). + */ + public function __construct($token, $users, $title = null, $level = Logger::CRITICAL, $bubble = true, $useSSL = true, $highPriorityLevel = Logger::CRITICAL, $emergencyLevel = Logger::EMERGENCY, $retry = 30, $expire = 25200) + { + $connectionString = $useSSL ? 'ssl://api.pushover.net:443' : 'api.pushover.net:80'; + parent::__construct($connectionString, $level, $bubble); + + $this->token = $token; + $this->users = (array) $users; + $this->title = $title ?: gethostname(); + $this->highPriorityLevel = Logger::toMonologLevel($highPriorityLevel); + $this->emergencyLevel = Logger::toMonologLevel($emergencyLevel); + $this->retry = $retry; + $this->expire = $expire; + } + + protected function generateDataStream($record) + { + $content = $this->buildContent($record); + + return $this->buildHeader($content) . $content; + } + + private function buildContent($record) + { + // Pushover has a limit of 512 characters on title and message combined. + $maxMessageLength = 512 - strlen($this->title); + + $message = ($this->useFormattedMessage) ? $record['formatted'] : $record['message']; + $message = substr($message, 0, $maxMessageLength); + + $timestamp = $record['datetime']->getTimestamp(); + + $dataArray = array( + 'token' => $this->token, + 'user' => $this->user, + 'message' => $message, + 'title' => $this->title, + 'timestamp' => $timestamp, + ); + + if (isset($record['level']) && $record['level'] >= $this->emergencyLevel) { + $dataArray['priority'] = 2; + $dataArray['retry'] = $this->retry; + $dataArray['expire'] = $this->expire; + } elseif (isset($record['level']) && $record['level'] >= $this->highPriorityLevel) { + $dataArray['priority'] = 1; + } + + // First determine the available parameters + $context = array_intersect_key($record['context'], $this->parameterNames); + $extra = array_intersect_key($record['extra'], $this->parameterNames); + + // Least important info should be merged with subsequent info + $dataArray = array_merge($extra, $context, $dataArray); + + // Only pass sounds that are supported by the API + if (isset($dataArray['sound']) && !in_array($dataArray['sound'], $this->sounds)) { + unset($dataArray['sound']); + } + + return http_build_query($dataArray); + } + + private function buildHeader($content) + { + $header = "POST /1/messages.json HTTP/1.1\r\n"; + $header .= "Host: api.pushover.net\r\n"; + $header .= "Content-Type: application/x-www-form-urlencoded\r\n"; + $header .= "Content-Length: " . strlen($content) . "\r\n"; + $header .= "\r\n"; + + return $header; + } + + protected function write(array $record) + { + foreach ($this->users as $user) { + $this->user = $user; + + parent::write($record); + $this->closeSocket(); + } + + $this->user = null; + } + + public function setHighPriorityLevel($value) + { + $this->highPriorityLevel = $value; + } + + public function setEmergencyLevel($value) + { + $this->emergencyLevel = $value; + } + + /** + * Use the formatted message? + * @param bool $value + */ + public function useFormattedMessage($value) + { + $this->useFormattedMessage = (bool) $value; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/RavenHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/RavenHandler.php new file mode 100644 index 00000000..c5f31073 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/RavenHandler.php @@ -0,0 +1,234 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Formatter\LineFormatter; +use Monolog\Formatter\FormatterInterface; +use Monolog\Logger; +use Raven_Client; + +/** + * Handler to send messages to a Sentry (https://github.com/getsentry/sentry) server + * using sentry-php (https://github.com/getsentry/sentry-php) + * + * @author Marc Abramowitz + */ +class RavenHandler extends AbstractProcessingHandler +{ + /** + * Translates Monolog log levels to Raven log levels. + */ + protected $logLevels = array( + Logger::DEBUG => Raven_Client::DEBUG, + Logger::INFO => Raven_Client::INFO, + Logger::NOTICE => Raven_Client::INFO, + Logger::WARNING => Raven_Client::WARNING, + Logger::ERROR => Raven_Client::ERROR, + Logger::CRITICAL => Raven_Client::FATAL, + Logger::ALERT => Raven_Client::FATAL, + Logger::EMERGENCY => Raven_Client::FATAL, + ); + + /** + * @var string should represent the current version of the calling + * software. Can be any string (git commit, version number) + */ + protected $release; + + /** + * @var Raven_Client the client object that sends the message to the server + */ + protected $ravenClient; + + /** + * @var LineFormatter The formatter to use for the logs generated via handleBatch() + */ + protected $batchFormatter; + + /** + * @param Raven_Client $ravenClient + * @param int $level The minimum logging level at which this handler will be triggered + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + */ + public function __construct(Raven_Client $ravenClient, $level = Logger::DEBUG, $bubble = true) + { + @trigger_error('The Monolog\Handler\RavenHandler class is deprecated. You should rather upgrade to the sentry/sentry 2.x and use Sentry\Monolog\Handler, see https://github.com/getsentry/sentry-php/blob/master/src/Monolog/Handler.php', E_USER_DEPRECATED); + + parent::__construct($level, $bubble); + + $this->ravenClient = $ravenClient; + } + + /** + * {@inheritdoc} + */ + public function handleBatch(array $records) + { + $level = $this->level; + + // filter records based on their level + $records = array_filter($records, function ($record) use ($level) { + return $record['level'] >= $level; + }); + + if (!$records) { + return; + } + + // the record with the highest severity is the "main" one + $record = array_reduce($records, function ($highest, $record) { + if ($record['level'] > $highest['level']) { + return $record; + } + + return $highest; + }); + + // the other ones are added as a context item + $logs = array(); + foreach ($records as $r) { + $logs[] = $this->processRecord($r); + } + + if ($logs) { + $record['context']['logs'] = (string) $this->getBatchFormatter()->formatBatch($logs); + } + + $this->handle($record); + } + + /** + * Sets the formatter for the logs generated by handleBatch(). + * + * @param FormatterInterface $formatter + */ + public function setBatchFormatter(FormatterInterface $formatter) + { + $this->batchFormatter = $formatter; + } + + /** + * Gets the formatter for the logs generated by handleBatch(). + * + * @return FormatterInterface + */ + public function getBatchFormatter() + { + if (!$this->batchFormatter) { + $this->batchFormatter = $this->getDefaultBatchFormatter(); + } + + return $this->batchFormatter; + } + + /** + * {@inheritdoc} + */ + protected function write(array $record) + { + $previousUserContext = false; + $options = array(); + $options['level'] = $this->logLevels[$record['level']]; + $options['tags'] = array(); + if (!empty($record['extra']['tags'])) { + $options['tags'] = array_merge($options['tags'], $record['extra']['tags']); + unset($record['extra']['tags']); + } + if (!empty($record['context']['tags'])) { + $options['tags'] = array_merge($options['tags'], $record['context']['tags']); + unset($record['context']['tags']); + } + if (!empty($record['context']['fingerprint'])) { + $options['fingerprint'] = $record['context']['fingerprint']; + unset($record['context']['fingerprint']); + } + if (!empty($record['context']['logger'])) { + $options['logger'] = $record['context']['logger']; + unset($record['context']['logger']); + } else { + $options['logger'] = $record['channel']; + } + foreach ($this->getExtraParameters() as $key) { + foreach (array('extra', 'context') as $source) { + if (!empty($record[$source][$key])) { + $options[$key] = $record[$source][$key]; + unset($record[$source][$key]); + } + } + } + if (!empty($record['context'])) { + $options['extra']['context'] = $record['context']; + if (!empty($record['context']['user'])) { + $previousUserContext = $this->ravenClient->context->user; + $this->ravenClient->user_context($record['context']['user']); + unset($options['extra']['context']['user']); + } + } + if (!empty($record['extra'])) { + $options['extra']['extra'] = $record['extra']; + } + + if (!empty($this->release) && !isset($options['release'])) { + $options['release'] = $this->release; + } + + if (isset($record['context']['exception']) && ($record['context']['exception'] instanceof \Exception || (PHP_VERSION_ID >= 70000 && $record['context']['exception'] instanceof \Throwable))) { + $options['message'] = $record['formatted']; + $this->ravenClient->captureException($record['context']['exception'], $options); + } else { + $this->ravenClient->captureMessage($record['formatted'], array(), $options); + } + + if ($previousUserContext !== false) { + $this->ravenClient->user_context($previousUserContext); + } + } + + /** + * {@inheritDoc} + */ + protected function getDefaultFormatter() + { + return new LineFormatter('[%channel%] %message%'); + } + + /** + * Gets the default formatter for the logs generated by handleBatch(). + * + * @return FormatterInterface + */ + protected function getDefaultBatchFormatter() + { + return new LineFormatter(); + } + + /** + * Gets extra parameters supported by Raven that can be found in "extra" and "context" + * + * @return array + */ + protected function getExtraParameters() + { + return array('contexts', 'checksum', 'release', 'event_id'); + } + + /** + * @param string $value + * @return self + */ + public function setRelease($value) + { + $this->release = $value; + + return $this; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/RedisHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/RedisHandler.php new file mode 100644 index 00000000..a25083d9 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/RedisHandler.php @@ -0,0 +1,98 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Formatter\LineFormatter; +use Monolog\Logger; + +/** + * Logs to a Redis key using rpush + * + * usage example: + * + * $log = new Logger('application'); + * $redis = new RedisHandler(new Predis\Client("tcp://localhost:6379"), "logs", "prod"); + * $log->pushHandler($redis); + * + * @author Thomas Tourlourat + */ +class RedisHandler extends AbstractProcessingHandler +{ + private $redisClient; + private $redisKey; + protected $capSize; + + /** + * @param \Predis\Client|\Redis $redis The redis instance + * @param string $key The key name to push records to + * @param int $level The minimum logging level at which this handler will be triggered + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + * @param int $capSize Number of entries to limit list size to + */ + public function __construct($redis, $key, $level = Logger::DEBUG, $bubble = true, $capSize = false) + { + if (!(($redis instanceof \Predis\Client) || ($redis instanceof \Redis))) { + throw new \InvalidArgumentException('Predis\Client or Redis instance required'); + } + + $this->redisClient = $redis; + $this->redisKey = $key; + $this->capSize = $capSize; + + parent::__construct($level, $bubble); + } + + /** + * {@inheritDoc} + */ + protected function write(array $record) + { + if ($this->capSize) { + $this->writeCapped($record); + } else { + $this->redisClient->rpush($this->redisKey, $record["formatted"]); + } + } + + /** + * Write and cap the collection + * Writes the record to the redis list and caps its + * + * @param array $record associative record array + * @return void + */ + protected function writeCapped(array $record) + { + if ($this->redisClient instanceof \Redis) { + $mode = defined('\Redis::MULTI') ? \Redis::MULTI : 1; + $this->redisClient->multi($mode) + ->rpush($this->redisKey, $record["formatted"]) + ->ltrim($this->redisKey, -$this->capSize, -1) + ->exec(); + } else { + $redisKey = $this->redisKey; + $capSize = $this->capSize; + $this->redisClient->transaction(function ($tx) use ($record, $redisKey, $capSize) { + $tx->rpush($redisKey, $record["formatted"]); + $tx->ltrim($redisKey, -$capSize, -1); + }); + } + } + + /** + * {@inheritDoc} + */ + protected function getDefaultFormatter() + { + return new LineFormatter(); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/RollbarHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/RollbarHandler.php new file mode 100644 index 00000000..20e95080 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/RollbarHandler.php @@ -0,0 +1,144 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use RollbarNotifier; +use Exception; +use Monolog\Logger; + +/** + * Sends errors to Rollbar + * + * If the context data contains a `payload` key, that is used as an array + * of payload options to RollbarNotifier's report_message/report_exception methods. + * + * Rollbar's context info will contain the context + extra keys from the log record + * merged, and then on top of that a few keys: + * + * - level (rollbar level name) + * - monolog_level (monolog level name, raw level, as rollbar only has 5 but monolog 8) + * - channel + * - datetime (unix timestamp) + * + * @author Paul Statezny + */ +class RollbarHandler extends AbstractProcessingHandler +{ + /** + * Rollbar notifier + * + * @var RollbarNotifier + */ + protected $rollbarNotifier; + + protected $levelMap = array( + Logger::DEBUG => 'debug', + Logger::INFO => 'info', + Logger::NOTICE => 'info', + Logger::WARNING => 'warning', + Logger::ERROR => 'error', + Logger::CRITICAL => 'critical', + Logger::ALERT => 'critical', + Logger::EMERGENCY => 'critical', + ); + + /** + * Records whether any log records have been added since the last flush of the rollbar notifier + * + * @var bool + */ + private $hasRecords = false; + + protected $initialized = false; + + /** + * @param RollbarNotifier $rollbarNotifier RollbarNotifier object constructed with valid token + * @param int $level The minimum logging level at which this handler will be triggered + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + */ + public function __construct(RollbarNotifier $rollbarNotifier, $level = Logger::ERROR, $bubble = true) + { + $this->rollbarNotifier = $rollbarNotifier; + + parent::__construct($level, $bubble); + } + + /** + * {@inheritdoc} + */ + protected function write(array $record) + { + if (!$this->initialized) { + // __destructor() doesn't get called on Fatal errors + register_shutdown_function(array($this, 'close')); + $this->initialized = true; + } + + $context = $record['context']; + $payload = array(); + if (isset($context['payload'])) { + $payload = $context['payload']; + unset($context['payload']); + } + $context = array_merge($context, $record['extra'], array( + 'level' => $this->levelMap[$record['level']], + 'monolog_level' => $record['level_name'], + 'channel' => $record['channel'], + 'datetime' => $record['datetime']->format('U'), + )); + + if (isset($context['exception']) && $context['exception'] instanceof Exception) { + $payload['level'] = $context['level']; + $exception = $context['exception']; + unset($context['exception']); + + $this->rollbarNotifier->report_exception($exception, $context, $payload); + } else { + $this->rollbarNotifier->report_message( + $record['message'], + $context['level'], + $context, + $payload + ); + } + + $this->hasRecords = true; + } + + public function flush() + { + if ($this->hasRecords) { + $this->rollbarNotifier->flush(); + $this->hasRecords = false; + } + } + + /** + * {@inheritdoc} + */ + public function close() + { + $this->flush(); + } + + /** + * {@inheritdoc} + */ + public function reset() + { + $this->flush(); + + parent::reset(); + } + + +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/RotatingFileHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/RotatingFileHandler.php new file mode 100644 index 00000000..ce0b7596 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/RotatingFileHandler.php @@ -0,0 +1,190 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Logger; + +/** + * Stores logs to files that are rotated every day and a limited number of files are kept. + * + * This rotation is only intended to be used as a workaround. Using logrotate to + * handle the rotation is strongly encouraged when you can use it. + * + * @author Christophe Coevoet + * @author Jordi Boggiano + */ +class RotatingFileHandler extends StreamHandler +{ + const FILE_PER_DAY = 'Y-m-d'; + const FILE_PER_MONTH = 'Y-m'; + const FILE_PER_YEAR = 'Y'; + + protected $filename; + protected $maxFiles; + protected $mustRotate; + protected $nextRotation; + protected $filenameFormat; + protected $dateFormat; + + /** + * @param string $filename + * @param int $maxFiles The maximal amount of files to keep (0 means unlimited) + * @param int $level The minimum logging level at which this handler will be triggered + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + * @param int|null $filePermission Optional file permissions (default (0644) are only for owner read/write) + * @param bool $useLocking Try to lock log file before doing any writes + */ + public function __construct($filename, $maxFiles = 0, $level = Logger::DEBUG, $bubble = true, $filePermission = null, $useLocking = false) + { + $this->filename = $filename; + $this->maxFiles = (int) $maxFiles; + $this->nextRotation = new \DateTime('tomorrow'); + $this->filenameFormat = '{filename}-{date}'; + $this->dateFormat = 'Y-m-d'; + + parent::__construct($this->getTimedFilename(), $level, $bubble, $filePermission, $useLocking); + } + + /** + * {@inheritdoc} + */ + public function close() + { + parent::close(); + + if (true === $this->mustRotate) { + $this->rotate(); + } + } + + /** + * {@inheritdoc} + */ + public function reset() + { + parent::reset(); + + if (true === $this->mustRotate) { + $this->rotate(); + } + } + + public function setFilenameFormat($filenameFormat, $dateFormat) + { + if (!preg_match('{^Y(([/_.-]?m)([/_.-]?d)?)?$}', $dateFormat)) { + trigger_error( + 'Invalid date format - format must be one of '. + 'RotatingFileHandler::FILE_PER_DAY ("Y-m-d"), RotatingFileHandler::FILE_PER_MONTH ("Y-m") '. + 'or RotatingFileHandler::FILE_PER_YEAR ("Y"), or you can set one of the '. + 'date formats using slashes, underscores and/or dots instead of dashes.', + E_USER_DEPRECATED + ); + } + if (substr_count($filenameFormat, '{date}') === 0) { + trigger_error( + 'Invalid filename format - format should contain at least `{date}`, because otherwise rotating is impossible.', + E_USER_DEPRECATED + ); + } + $this->filenameFormat = $filenameFormat; + $this->dateFormat = $dateFormat; + $this->url = $this->getTimedFilename(); + $this->close(); + } + + /** + * {@inheritdoc} + */ + protected function write(array $record) + { + // on the first record written, if the log is new, we should rotate (once per day) + if (null === $this->mustRotate) { + $this->mustRotate = !file_exists($this->url); + } + + if ($this->nextRotation < $record['datetime']) { + $this->mustRotate = true; + $this->close(); + } + + parent::write($record); + } + + /** + * Rotates the files. + */ + protected function rotate() + { + // update filename + $this->url = $this->getTimedFilename(); + $this->nextRotation = new \DateTime('tomorrow'); + + // skip GC of old logs if files are unlimited + if (0 === $this->maxFiles) { + return; + } + + $logFiles = glob($this->getGlobPattern()); + if ($this->maxFiles >= count($logFiles)) { + // no files to remove + return; + } + + // Sorting the files by name to remove the older ones + usort($logFiles, function ($a, $b) { + return strcmp($b, $a); + }); + + foreach (array_slice($logFiles, $this->maxFiles) as $file) { + if (is_writable($file)) { + // suppress errors here as unlink() might fail if two processes + // are cleaning up/rotating at the same time + set_error_handler(function ($errno, $errstr, $errfile, $errline) {}); + unlink($file); + restore_error_handler(); + } + } + + $this->mustRotate = false; + } + + protected function getTimedFilename() + { + $fileInfo = pathinfo($this->filename); + $timedFilename = str_replace( + array('{filename}', '{date}'), + array($fileInfo['filename'], date($this->dateFormat)), + $fileInfo['dirname'] . '/' . $this->filenameFormat + ); + + if (!empty($fileInfo['extension'])) { + $timedFilename .= '.'.$fileInfo['extension']; + } + + return $timedFilename; + } + + protected function getGlobPattern() + { + $fileInfo = pathinfo($this->filename); + $glob = str_replace( + array('{filename}', '{date}'), + array($fileInfo['filename'], '[0-9][0-9][0-9][0-9]*'), + $fileInfo['dirname'] . '/' . $this->filenameFormat + ); + if (!empty($fileInfo['extension'])) { + $glob .= '.'.$fileInfo['extension']; + } + + return $glob; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/SamplingHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/SamplingHandler.php new file mode 100644 index 00000000..505d679a --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/SamplingHandler.php @@ -0,0 +1,113 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Formatter\FormatterInterface; + +/** + * Sampling handler + * + * A sampled event stream can be useful for logging high frequency events in + * a production environment where you only need an idea of what is happening + * and are not concerned with capturing every occurrence. Since the decision to + * handle or not handle a particular event is determined randomly, the + * resulting sampled log is not guaranteed to contain 1/N of the events that + * occurred in the application, but based on the Law of large numbers, it will + * tend to be close to this ratio with a large number of attempts. + * + * @author Bryan Davis + * @author Kunal Mehta + */ +class SamplingHandler extends AbstractHandler +{ + /** + * @var callable|HandlerInterface $handler + */ + protected $handler; + + /** + * @var int $factor + */ + protected $factor; + + /** + * @param callable|HandlerInterface $handler Handler or factory callable($record|null, $samplingHandler). + * @param int $factor Sample factor + */ + public function __construct($handler, $factor) + { + parent::__construct(); + $this->handler = $handler; + $this->factor = $factor; + + if (!$this->handler instanceof HandlerInterface && !is_callable($this->handler)) { + throw new \RuntimeException("The given handler (".json_encode($this->handler).") is not a callable nor a Monolog\Handler\HandlerInterface object"); + } + } + + public function isHandling(array $record) + { + return $this->getHandler($record)->isHandling($record); + } + + public function handle(array $record) + { + if ($this->isHandling($record) && mt_rand(1, $this->factor) === 1) { + if ($this->processors) { + foreach ($this->processors as $processor) { + $record = call_user_func($processor, $record); + } + } + + $this->getHandler($record)->handle($record); + } + + return false === $this->bubble; + } + + /** + * Return the nested handler + * + * If the handler was provided as a factory callable, this will trigger the handler's instantiation. + * + * @return HandlerInterface + */ + public function getHandler(array $record = null) + { + if (!$this->handler instanceof HandlerInterface) { + $this->handler = call_user_func($this->handler, $record, $this); + if (!$this->handler instanceof HandlerInterface) { + throw new \RuntimeException("The factory callable should return a HandlerInterface"); + } + } + + return $this->handler; + } + + /** + * {@inheritdoc} + */ + public function setFormatter(FormatterInterface $formatter) + { + $this->getHandler()->setFormatter($formatter); + + return $this; + } + + /** + * {@inheritdoc} + */ + public function getFormatter() + { + return $this->getHandler()->getFormatter(); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/Slack/SlackRecord.php b/vendor/monolog/monolog/src/Monolog/Handler/Slack/SlackRecord.php new file mode 100644 index 00000000..a1808fab --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/Slack/SlackRecord.php @@ -0,0 +1,299 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler\Slack; + +use Monolog\Logger; +use Monolog\Utils; +use Monolog\Formatter\NormalizerFormatter; +use Monolog\Formatter\FormatterInterface; + +/** + * Slack record utility helping to log to Slack webhooks or API. + * + * @author Greg Kedzierski + * @author Haralan Dobrev + * @see https://api.slack.com/incoming-webhooks + * @see https://api.slack.com/docs/message-attachments + */ +class SlackRecord +{ + const COLOR_DANGER = 'danger'; + + const COLOR_WARNING = 'warning'; + + const COLOR_GOOD = 'good'; + + const COLOR_DEFAULT = '#e3e4e6'; + + /** + * Slack channel (encoded ID or name) + * @var string|null + */ + private $channel; + + /** + * Name of a bot + * @var string|null + */ + private $username; + + /** + * User icon e.g. 'ghost', 'http://example.com/user.png' + * @var string + */ + private $userIcon; + + /** + * Whether the message should be added to Slack as attachment (plain text otherwise) + * @var bool + */ + private $useAttachment; + + /** + * Whether the the context/extra messages added to Slack as attachments are in a short style + * @var bool + */ + private $useShortAttachment; + + /** + * Whether the attachment should include context and extra data + * @var bool + */ + private $includeContextAndExtra; + + /** + * Dot separated list of fields to exclude from slack message. E.g. ['context.field1', 'extra.field2'] + * @var array + */ + private $excludeFields; + + /** + * @var FormatterInterface + */ + private $formatter; + + /** + * @var NormalizerFormatter + */ + private $normalizerFormatter; + + public function __construct($channel = null, $username = null, $useAttachment = true, $userIcon = null, $useShortAttachment = false, $includeContextAndExtra = false, array $excludeFields = array(), FormatterInterface $formatter = null) + { + $this->channel = $channel; + $this->username = $username; + $this->userIcon = trim($userIcon, ':'); + $this->useAttachment = $useAttachment; + $this->useShortAttachment = $useShortAttachment; + $this->includeContextAndExtra = $includeContextAndExtra; + $this->excludeFields = $excludeFields; + $this->formatter = $formatter; + + if ($this->includeContextAndExtra) { + $this->normalizerFormatter = new NormalizerFormatter(); + } + } + + public function getSlackData(array $record) + { + $dataArray = array(); + $record = $this->excludeFields($record); + + if ($this->username) { + $dataArray['username'] = $this->username; + } + + if ($this->channel) { + $dataArray['channel'] = $this->channel; + } + + if ($this->formatter && !$this->useAttachment) { + $message = $this->formatter->format($record); + } else { + $message = $record['message']; + } + + if ($this->useAttachment) { + $attachment = array( + 'fallback' => $message, + 'text' => $message, + 'color' => $this->getAttachmentColor($record['level']), + 'fields' => array(), + 'mrkdwn_in' => array('fields'), + 'ts' => $record['datetime']->getTimestamp() + ); + + if ($this->useShortAttachment) { + $attachment['title'] = $record['level_name']; + } else { + $attachment['title'] = 'Message'; + $attachment['fields'][] = $this->generateAttachmentField('Level', $record['level_name']); + } + + + if ($this->includeContextAndExtra) { + foreach (array('extra', 'context') as $key) { + if (empty($record[$key])) { + continue; + } + + if ($this->useShortAttachment) { + $attachment['fields'][] = $this->generateAttachmentField( + $key, + $record[$key] + ); + } else { + // Add all extra fields as individual fields in attachment + $attachment['fields'] = array_merge( + $attachment['fields'], + $this->generateAttachmentFields($record[$key]) + ); + } + } + } + + $dataArray['attachments'] = array($attachment); + } else { + $dataArray['text'] = $message; + } + + if ($this->userIcon) { + if (filter_var($this->userIcon, FILTER_VALIDATE_URL)) { + $dataArray['icon_url'] = $this->userIcon; + } else { + $dataArray['icon_emoji'] = ":{$this->userIcon}:"; + } + } + + return $dataArray; + } + + /** + * Returned a Slack message attachment color associated with + * provided level. + * + * @param int $level + * @return string + */ + public function getAttachmentColor($level) + { + switch (true) { + case $level >= Logger::ERROR: + return self::COLOR_DANGER; + case $level >= Logger::WARNING: + return self::COLOR_WARNING; + case $level >= Logger::INFO: + return self::COLOR_GOOD; + default: + return self::COLOR_DEFAULT; + } + } + + /** + * Stringifies an array of key/value pairs to be used in attachment fields + * + * @param array $fields + * + * @return string + */ + public function stringify($fields) + { + $normalized = $this->normalizerFormatter->format($fields); + $prettyPrintFlag = defined('JSON_PRETTY_PRINT') ? JSON_PRETTY_PRINT : 128; + $flags = 0; + if (PHP_VERSION_ID >= 50400) { + $flags = JSON_UNESCAPED_SLASHES | JSON_UNESCAPED_UNICODE; + } + + $hasSecondDimension = count(array_filter($normalized, 'is_array')); + $hasNonNumericKeys = !count(array_filter(array_keys($normalized), 'is_numeric')); + + return $hasSecondDimension || $hasNonNumericKeys + ? Utils::jsonEncode($normalized, $prettyPrintFlag | $flags) + : Utils::jsonEncode($normalized, $flags); + } + + /** + * Sets the formatter + * + * @param FormatterInterface $formatter + */ + public function setFormatter(FormatterInterface $formatter) + { + $this->formatter = $formatter; + } + + /** + * Generates attachment field + * + * @param string $title + * @param string|array $value + * + * @return array + */ + private function generateAttachmentField($title, $value) + { + $value = is_array($value) + ? sprintf('```%s```', $this->stringify($value)) + : $value; + + return array( + 'title' => ucfirst($title), + 'value' => $value, + 'short' => false + ); + } + + /** + * Generates a collection of attachment fields from array + * + * @param array $data + * + * @return array + */ + private function generateAttachmentFields(array $data) + { + $fields = array(); + foreach ($this->normalizerFormatter->format($data) as $key => $value) { + $fields[] = $this->generateAttachmentField($key, $value); + } + + return $fields; + } + + /** + * Get a copy of record with fields excluded according to $this->excludeFields + * + * @param array $record + * + * @return array + */ + private function excludeFields(array $record) + { + foreach ($this->excludeFields as $field) { + $keys = explode('.', $field); + $node = &$record; + $lastKey = end($keys); + foreach ($keys as $key) { + if (!isset($node[$key])) { + break; + } + if ($lastKey === $key) { + unset($node[$key]); + break; + } + $node = &$node[$key]; + } + } + + return $record; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/SlackHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/SlackHandler.php new file mode 100644 index 00000000..c4373210 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/SlackHandler.php @@ -0,0 +1,221 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Formatter\FormatterInterface; +use Monolog\Logger; +use Monolog\Utils; +use Monolog\Handler\Slack\SlackRecord; + +/** + * Sends notifications through Slack API + * + * @author Greg Kedzierski + * @see https://api.slack.com/ + */ +class SlackHandler extends SocketHandler +{ + /** + * Slack API token + * @var string + */ + private $token; + + /** + * Instance of the SlackRecord util class preparing data for Slack API. + * @var SlackRecord + */ + private $slackRecord; + + /** + * @param string $token Slack API token + * @param string $channel Slack channel (encoded ID or name) + * @param string|null $username Name of a bot + * @param bool $useAttachment Whether the message should be added to Slack as attachment (plain text otherwise) + * @param string|null $iconEmoji The emoji name to use (or null) + * @param int $level The minimum logging level at which this handler will be triggered + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + * @param bool $useShortAttachment Whether the the context/extra messages added to Slack as attachments are in a short style + * @param bool $includeContextAndExtra Whether the attachment should include context and extra data + * @param array $excludeFields Dot separated list of fields to exclude from slack message. E.g. ['context.field1', 'extra.field2'] + * @throws MissingExtensionException If no OpenSSL PHP extension configured + */ + public function __construct($token, $channel, $username = null, $useAttachment = true, $iconEmoji = null, $level = Logger::CRITICAL, $bubble = true, $useShortAttachment = false, $includeContextAndExtra = false, array $excludeFields = array()) + { + if (!extension_loaded('openssl')) { + throw new MissingExtensionException('The OpenSSL PHP extension is required to use the SlackHandler'); + } + + parent::__construct('ssl://slack.com:443', $level, $bubble); + + $this->slackRecord = new SlackRecord( + $channel, + $username, + $useAttachment, + $iconEmoji, + $useShortAttachment, + $includeContextAndExtra, + $excludeFields, + $this->formatter + ); + + $this->token = $token; + } + + public function getSlackRecord() + { + return $this->slackRecord; + } + + public function getToken() + { + return $this->token; + } + + /** + * {@inheritdoc} + * + * @param array $record + * @return string + */ + protected function generateDataStream($record) + { + $content = $this->buildContent($record); + + return $this->buildHeader($content) . $content; + } + + /** + * Builds the body of API call + * + * @param array $record + * @return string + */ + private function buildContent($record) + { + $dataArray = $this->prepareContentData($record); + + return http_build_query($dataArray); + } + + /** + * Prepares content data + * + * @param array $record + * @return array + */ + protected function prepareContentData($record) + { + $dataArray = $this->slackRecord->getSlackData($record); + $dataArray['token'] = $this->token; + + if (!empty($dataArray['attachments'])) { + $dataArray['attachments'] = Utils::jsonEncode($dataArray['attachments']); + } + + return $dataArray; + } + + /** + * Builds the header of the API Call + * + * @param string $content + * @return string + */ + private function buildHeader($content) + { + $header = "POST /api/chat.postMessage HTTP/1.1\r\n"; + $header .= "Host: slack.com\r\n"; + $header .= "Content-Type: application/x-www-form-urlencoded\r\n"; + $header .= "Content-Length: " . strlen($content) . "\r\n"; + $header .= "\r\n"; + + return $header; + } + + /** + * {@inheritdoc} + * + * @param array $record + */ + protected function write(array $record) + { + parent::write($record); + $this->finalizeWrite(); + } + + /** + * Finalizes the request by reading some bytes and then closing the socket + * + * If we do not read some but close the socket too early, slack sometimes + * drops the request entirely. + */ + protected function finalizeWrite() + { + $res = $this->getResource(); + if (is_resource($res)) { + @fread($res, 2048); + } + $this->closeSocket(); + } + + /** + * Returned a Slack message attachment color associated with + * provided level. + * + * @param int $level + * @return string + * @deprecated Use underlying SlackRecord instead + */ + protected function getAttachmentColor($level) + { + trigger_error( + 'SlackHandler::getAttachmentColor() is deprecated. Use underlying SlackRecord instead.', + E_USER_DEPRECATED + ); + + return $this->slackRecord->getAttachmentColor($level); + } + + /** + * Stringifies an array of key/value pairs to be used in attachment fields + * + * @param array $fields + * @return string + * @deprecated Use underlying SlackRecord instead + */ + protected function stringify($fields) + { + trigger_error( + 'SlackHandler::stringify() is deprecated. Use underlying SlackRecord instead.', + E_USER_DEPRECATED + ); + + return $this->slackRecord->stringify($fields); + } + + public function setFormatter(FormatterInterface $formatter) + { + parent::setFormatter($formatter); + $this->slackRecord->setFormatter($formatter); + + return $this; + } + + public function getFormatter() + { + $formatter = parent::getFormatter(); + $this->slackRecord->setFormatter($formatter); + + return $formatter; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/SlackWebhookHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/SlackWebhookHandler.php new file mode 100644 index 00000000..e2ec60aa --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/SlackWebhookHandler.php @@ -0,0 +1,121 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Formatter\FormatterInterface; +use Monolog\Logger; +use Monolog\Utils; +use Monolog\Handler\Slack\SlackRecord; + +/** + * Sends notifications through Slack Webhooks + * + * @author Haralan Dobrev + * @see https://api.slack.com/incoming-webhooks + */ +class SlackWebhookHandler extends AbstractProcessingHandler +{ + /** + * Slack Webhook token + * @var string + */ + private $webhookUrl; + + /** + * Instance of the SlackRecord util class preparing data for Slack API. + * @var SlackRecord + */ + private $slackRecord; + + /** + * @param string $webhookUrl Slack Webhook URL + * @param string|null $channel Slack channel (encoded ID or name) + * @param string|null $username Name of a bot + * @param bool $useAttachment Whether the message should be added to Slack as attachment (plain text otherwise) + * @param string|null $iconEmoji The emoji name to use (or null) + * @param bool $useShortAttachment Whether the the context/extra messages added to Slack as attachments are in a short style + * @param bool $includeContextAndExtra Whether the attachment should include context and extra data + * @param int $level The minimum logging level at which this handler will be triggered + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + * @param array $excludeFields Dot separated list of fields to exclude from slack message. E.g. ['context.field1', 'extra.field2'] + */ + public function __construct($webhookUrl, $channel = null, $username = null, $useAttachment = true, $iconEmoji = null, $useShortAttachment = false, $includeContextAndExtra = false, $level = Logger::CRITICAL, $bubble = true, array $excludeFields = array()) + { + parent::__construct($level, $bubble); + + $this->webhookUrl = $webhookUrl; + + $this->slackRecord = new SlackRecord( + $channel, + $username, + $useAttachment, + $iconEmoji, + $useShortAttachment, + $includeContextAndExtra, + $excludeFields, + $this->formatter + ); + } + + public function getSlackRecord() + { + return $this->slackRecord; + } + + public function getWebhookUrl() + { + return $this->webhookUrl; + } + + /** + * {@inheritdoc} + * + * @param array $record + */ + protected function write(array $record) + { + $postData = $this->slackRecord->getSlackData($record); + $postString = Utils::jsonEncode($postData); + + $ch = curl_init(); + $options = array( + CURLOPT_URL => $this->webhookUrl, + CURLOPT_POST => true, + CURLOPT_RETURNTRANSFER => true, + CURLOPT_HTTPHEADER => array('Content-type: application/json'), + CURLOPT_POSTFIELDS => $postString + ); + if (defined('CURLOPT_SAFE_UPLOAD')) { + $options[CURLOPT_SAFE_UPLOAD] = true; + } + + curl_setopt_array($ch, $options); + + Curl\Util::execute($ch); + } + + public function setFormatter(FormatterInterface $formatter) + { + parent::setFormatter($formatter); + $this->slackRecord->setFormatter($formatter); + + return $this; + } + + public function getFormatter() + { + $formatter = parent::getFormatter(); + $this->slackRecord->setFormatter($formatter); + + return $formatter; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/SlackbotHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/SlackbotHandler.php new file mode 100644 index 00000000..4495196c --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/SlackbotHandler.php @@ -0,0 +1,84 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Logger; + +/** + * Sends notifications through Slack's Slackbot + * + * @author Haralan Dobrev + * @see https://slack.com/apps/A0F81R8ET-slackbot + * @deprecated According to Slack the API used on this handler it is deprecated. + * Therefore this handler will be removed on 2.x + * Slack suggests to use webhooks instead. Please contact slack for more information. + */ +class SlackbotHandler extends AbstractProcessingHandler +{ + /** + * The slug of the Slack team + * @var string + */ + private $slackTeam; + + /** + * Slackbot token + * @var string + */ + private $token; + + /** + * Slack channel name + * @var string + */ + private $channel; + + /** + * @param string $slackTeam Slack team slug + * @param string $token Slackbot token + * @param string $channel Slack channel (encoded ID or name) + * @param int $level The minimum logging level at which this handler will be triggered + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + */ + public function __construct($slackTeam, $token, $channel, $level = Logger::CRITICAL, $bubble = true) + { + @trigger_error('SlackbotHandler is deprecated and will be removed on 2.x', E_USER_DEPRECATED); + parent::__construct($level, $bubble); + + $this->slackTeam = $slackTeam; + $this->token = $token; + $this->channel = $channel; + } + + /** + * {@inheritdoc} + * + * @param array $record + */ + protected function write(array $record) + { + $slackbotUrl = sprintf( + 'https://%s.slack.com/services/hooks/slackbot?token=%s&channel=%s', + $this->slackTeam, + $this->token, + $this->channel + ); + + $ch = curl_init(); + curl_setopt($ch, CURLOPT_URL, $slackbotUrl); + curl_setopt($ch, CURLOPT_POST, true); + curl_setopt($ch, CURLOPT_RETURNTRANSFER, true); + curl_setopt($ch, CURLOPT_POSTFIELDS, $record['message']); + + Curl\Util::execute($ch); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/SocketHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/SocketHandler.php new file mode 100644 index 00000000..cc4141d2 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/SocketHandler.php @@ -0,0 +1,385 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Logger; + +/** + * Stores to any socket - uses fsockopen() or pfsockopen(). + * + * @author Pablo de Leon Belloc + * @see http://php.net/manual/en/function.fsockopen.php + */ +class SocketHandler extends AbstractProcessingHandler +{ + private $connectionString; + private $connectionTimeout; + private $resource; + private $timeout = 0; + private $writingTimeout = 10; + private $lastSentBytes = null; + private $chunkSize = null; + private $persistent = false; + private $errno; + private $errstr; + private $lastWritingAt; + + /** + * @param string $connectionString Socket connection string + * @param int $level The minimum logging level at which this handler will be triggered + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + */ + public function __construct($connectionString, $level = Logger::DEBUG, $bubble = true) + { + parent::__construct($level, $bubble); + $this->connectionString = $connectionString; + $this->connectionTimeout = (float) ini_get('default_socket_timeout'); + } + + /** + * Connect (if necessary) and write to the socket + * + * @param array $record + * + * @throws \UnexpectedValueException + * @throws \RuntimeException + */ + protected function write(array $record) + { + $this->connectIfNotConnected(); + $data = $this->generateDataStream($record); + $this->writeToSocket($data); + } + + /** + * We will not close a PersistentSocket instance so it can be reused in other requests. + */ + public function close() + { + if (!$this->isPersistent()) { + $this->closeSocket(); + } + } + + /** + * Close socket, if open + */ + public function closeSocket() + { + if (is_resource($this->resource)) { + fclose($this->resource); + $this->resource = null; + } + } + + /** + * Set socket connection to nbe persistent. It only has effect before the connection is initiated. + * + * @param bool $persistent + */ + public function setPersistent($persistent) + { + $this->persistent = (bool) $persistent; + } + + /** + * Set connection timeout. Only has effect before we connect. + * + * @param float $seconds + * + * @see http://php.net/manual/en/function.fsockopen.php + */ + public function setConnectionTimeout($seconds) + { + $this->validateTimeout($seconds); + $this->connectionTimeout = (float) $seconds; + } + + /** + * Set write timeout. Only has effect before we connect. + * + * @param float $seconds + * + * @see http://php.net/manual/en/function.stream-set-timeout.php + */ + public function setTimeout($seconds) + { + $this->validateTimeout($seconds); + $this->timeout = (float) $seconds; + } + + /** + * Set writing timeout. Only has effect during connection in the writing cycle. + * + * @param float $seconds 0 for no timeout + */ + public function setWritingTimeout($seconds) + { + $this->validateTimeout($seconds); + $this->writingTimeout = (float) $seconds; + } + + /** + * Set chunk size. Only has effect during connection in the writing cycle. + * + * @param float $bytes + */ + public function setChunkSize($bytes) + { + $this->chunkSize = $bytes; + } + + /** + * Get current connection string + * + * @return string + */ + public function getConnectionString() + { + return $this->connectionString; + } + + /** + * Get persistent setting + * + * @return bool + */ + public function isPersistent() + { + return $this->persistent; + } + + /** + * Get current connection timeout setting + * + * @return float + */ + public function getConnectionTimeout() + { + return $this->connectionTimeout; + } + + /** + * Get current in-transfer timeout + * + * @return float + */ + public function getTimeout() + { + return $this->timeout; + } + + /** + * Get current local writing timeout + * + * @return float + */ + public function getWritingTimeout() + { + return $this->writingTimeout; + } + + /** + * Get current chunk size + * + * @return float + */ + public function getChunkSize() + { + return $this->chunkSize; + } + + /** + * Check to see if the socket is currently available. + * + * UDP might appear to be connected but might fail when writing. See http://php.net/fsockopen for details. + * + * @return bool + */ + public function isConnected() + { + return is_resource($this->resource) + && !feof($this->resource); // on TCP - other party can close connection. + } + + /** + * Wrapper to allow mocking + */ + protected function pfsockopen() + { + return @pfsockopen($this->connectionString, -1, $this->errno, $this->errstr, $this->connectionTimeout); + } + + /** + * Wrapper to allow mocking + */ + protected function fsockopen() + { + return @fsockopen($this->connectionString, -1, $this->errno, $this->errstr, $this->connectionTimeout); + } + + /** + * Wrapper to allow mocking + * + * @see http://php.net/manual/en/function.stream-set-timeout.php + */ + protected function streamSetTimeout() + { + $seconds = floor($this->timeout); + $microseconds = round(($this->timeout - $seconds) * 1e6); + + return stream_set_timeout($this->resource, $seconds, $microseconds); + } + + /** + * Wrapper to allow mocking + * + * @see http://php.net/manual/en/function.stream-set-chunk-size.php + */ + protected function streamSetChunkSize() + { + return stream_set_chunk_size($this->resource, $this->chunkSize); + } + + /** + * Wrapper to allow mocking + */ + protected function fwrite($data) + { + return @fwrite($this->resource, $data); + } + + /** + * Wrapper to allow mocking + */ + protected function streamGetMetadata() + { + return stream_get_meta_data($this->resource); + } + + private function validateTimeout($value) + { + $ok = filter_var($value, FILTER_VALIDATE_FLOAT); + if ($ok === false || $value < 0) { + throw new \InvalidArgumentException("Timeout must be 0 or a positive float (got $value)"); + } + } + + private function connectIfNotConnected() + { + if ($this->isConnected()) { + return; + } + $this->connect(); + } + + protected function generateDataStream($record) + { + return (string) $record['formatted']; + } + + /** + * @return resource|null + */ + protected function getResource() + { + return $this->resource; + } + + private function connect() + { + $this->createSocketResource(); + $this->setSocketTimeout(); + $this->setStreamChunkSize(); + } + + private function createSocketResource() + { + if ($this->isPersistent()) { + $resource = $this->pfsockopen(); + } else { + $resource = $this->fsockopen(); + } + if (!$resource) { + throw new \UnexpectedValueException("Failed connecting to $this->connectionString ($this->errno: $this->errstr)"); + } + $this->resource = $resource; + } + + private function setSocketTimeout() + { + if (!$this->streamSetTimeout()) { + throw new \UnexpectedValueException("Failed setting timeout with stream_set_timeout()"); + } + } + + private function setStreamChunkSize() + { + if ($this->chunkSize && !$this->streamSetChunkSize()) { + throw new \UnexpectedValueException("Failed setting chunk size with stream_set_chunk_size()"); + } + } + + private function writeToSocket($data) + { + $length = strlen($data); + $sent = 0; + $this->lastSentBytes = $sent; + while ($this->isConnected() && $sent < $length) { + if (0 == $sent) { + $chunk = $this->fwrite($data); + } else { + $chunk = $this->fwrite(substr($data, $sent)); + } + if ($chunk === false) { + throw new \RuntimeException("Could not write to socket"); + } + $sent += $chunk; + $socketInfo = $this->streamGetMetadata(); + if ($socketInfo['timed_out']) { + throw new \RuntimeException("Write timed-out"); + } + + if ($this->writingIsTimedOut($sent)) { + throw new \RuntimeException("Write timed-out, no data sent for `{$this->writingTimeout}` seconds, probably we got disconnected (sent $sent of $length)"); + } + } + if (!$this->isConnected() && $sent < $length) { + throw new \RuntimeException("End-of-file reached, probably we got disconnected (sent $sent of $length)"); + } + } + + private function writingIsTimedOut($sent) + { + $writingTimeout = (int) floor($this->writingTimeout); + if (0 === $writingTimeout) { + return false; + } + + if ($sent !== $this->lastSentBytes) { + $this->lastWritingAt = time(); + $this->lastSentBytes = $sent; + + return false; + } else { + usleep(100); + } + + if ((time() - $this->lastWritingAt) >= $writingTimeout) { + $this->closeSocket(); + + return true; + } + + return false; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/StreamHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/StreamHandler.php new file mode 100644 index 00000000..57eebafe --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/StreamHandler.php @@ -0,0 +1,177 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Logger; + +/** + * Stores to any stream resource + * + * Can be used to store into php://stderr, remote and local files, etc. + * + * @author Jordi Boggiano + */ +class StreamHandler extends AbstractProcessingHandler +{ + protected $stream; + protected $url; + private $errorMessage; + protected $filePermission; + protected $useLocking; + private $dirCreated; + + /** + * @param resource|string $stream + * @param int $level The minimum logging level at which this handler will be triggered + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + * @param int|null $filePermission Optional file permissions (default (0644) are only for owner read/write) + * @param bool $useLocking Try to lock log file before doing any writes + * + * @throws \Exception If a missing directory is not buildable + * @throws \InvalidArgumentException If stream is not a resource or string + */ + public function __construct($stream, $level = Logger::DEBUG, $bubble = true, $filePermission = null, $useLocking = false) + { + parent::__construct($level, $bubble); + if (is_resource($stream)) { + $this->stream = $stream; + } elseif (is_string($stream)) { + $this->url = $stream; + } else { + throw new \InvalidArgumentException('A stream must either be a resource or a string.'); + } + + $this->filePermission = $filePermission; + $this->useLocking = $useLocking; + } + + /** + * {@inheritdoc} + */ + public function close() + { + if ($this->url && is_resource($this->stream)) { + fclose($this->stream); + } + $this->stream = null; + $this->dirCreated = null; + } + + /** + * Return the currently active stream if it is open + * + * @return resource|null + */ + public function getStream() + { + return $this->stream; + } + + /** + * Return the stream URL if it was configured with a URL and not an active resource + * + * @return string|null + */ + public function getUrl() + { + return $this->url; + } + + /** + * {@inheritdoc} + */ + protected function write(array $record) + { + if (!is_resource($this->stream)) { + if (null === $this->url || '' === $this->url) { + throw new \LogicException('Missing stream url, the stream can not be opened. This may be caused by a premature call to close().'); + } + $this->createDir(); + $this->errorMessage = null; + set_error_handler(array($this, 'customErrorHandler')); + $this->stream = fopen($this->url, 'a'); + if ($this->filePermission !== null) { + @chmod($this->url, $this->filePermission); + } + restore_error_handler(); + if (!is_resource($this->stream)) { + $this->stream = null; + throw new \UnexpectedValueException(sprintf('The stream or file "%s" could not be opened: '.$this->errorMessage, $this->url)); + } + } + + if ($this->useLocking) { + // ignoring errors here, there's not much we can do about them + flock($this->stream, LOCK_EX); + } + + $this->streamWrite($this->stream, $record); + + if ($this->useLocking) { + flock($this->stream, LOCK_UN); + } + } + + /** + * Write to stream + * @param resource $stream + * @param array $record + */ + protected function streamWrite($stream, array $record) + { + fwrite($stream, (string) $record['formatted']); + } + + private function customErrorHandler($code, $msg) + { + $this->errorMessage = preg_replace('{^(fopen|mkdir)\(.*?\): }', '', $msg); + } + + /** + * @param string $stream + * + * @return null|string + */ + private function getDirFromStream($stream) + { + $pos = strpos($stream, '://'); + if ($pos === false) { + return dirname($stream); + } + + if ('file://' === substr($stream, 0, 7)) { + return dirname(substr($stream, 7)); + } + + return; + } + + private function createDir() + { + // Do not try to create dir if it has already been tried. + if ($this->dirCreated) { + return; + } + + $dir = $this->getDirFromStream($this->url); + if (null !== $dir && !is_dir($dir)) { + $this->errorMessage = null; + set_error_handler(array($this, 'customErrorHandler')); + $status = mkdir($dir, 0777, true); + restore_error_handler(); + if (false === $status && !is_dir($dir)) { + throw new \UnexpectedValueException(sprintf('There is no existing directory at "%s" and its not buildable: '.$this->errorMessage, $dir)); + } + } + $this->dirCreated = true; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/SwiftMailerHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/SwiftMailerHandler.php new file mode 100644 index 00000000..867e271e --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/SwiftMailerHandler.php @@ -0,0 +1,111 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Logger; +use Monolog\Formatter\FormatterInterface; +use Monolog\Formatter\LineFormatter; +use Swift; + +/** + * SwiftMailerHandler uses Swift_Mailer to send the emails + * + * @author Gyula Sallai + */ +class SwiftMailerHandler extends MailHandler +{ + protected $mailer; + private $messageTemplate; + + /** + * @param \Swift_Mailer $mailer The mailer to use + * @param callable|\Swift_Message $message An example message for real messages, only the body will be replaced + * @param int $level The minimum logging level at which this handler will be triggered + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + */ + public function __construct(\Swift_Mailer $mailer, $message, $level = Logger::ERROR, $bubble = true) + { + parent::__construct($level, $bubble); + + $this->mailer = $mailer; + $this->messageTemplate = $message; + } + + /** + * {@inheritdoc} + */ + protected function send($content, array $records) + { + $this->mailer->send($this->buildMessage($content, $records)); + } + + /** + * Gets the formatter for the Swift_Message subject. + * + * @param string $format The format of the subject + * @return FormatterInterface + */ + protected function getSubjectFormatter($format) + { + return new LineFormatter($format); + } + + /** + * Creates instance of Swift_Message to be sent + * + * @param string $content formatted email body to be sent + * @param array $records Log records that formed the content + * @return \Swift_Message + */ + protected function buildMessage($content, array $records) + { + $message = null; + if ($this->messageTemplate instanceof \Swift_Message) { + $message = clone $this->messageTemplate; + $message->generateId(); + } elseif (is_callable($this->messageTemplate)) { + $message = call_user_func($this->messageTemplate, $content, $records); + } + + if (!$message instanceof \Swift_Message) { + throw new \InvalidArgumentException('Could not resolve message as instance of Swift_Message or a callable returning it'); + } + + if ($records) { + $subjectFormatter = $this->getSubjectFormatter($message->getSubject()); + $message->setSubject($subjectFormatter->format($this->getHighestRecord($records))); + } + + $message->setBody($content); + if (version_compare(Swift::VERSION, '6.0.0', '>=')) { + $message->setDate(new \DateTimeImmutable()); + } else { + $message->setDate(time()); + } + + return $message; + } + + /** + * BC getter, to be removed in 2.0 + */ + public function __get($name) + { + if ($name === 'message') { + trigger_error('SwiftMailerHandler->message is deprecated, use ->buildMessage() instead to retrieve the message', E_USER_DEPRECATED); + + return $this->buildMessage(null, array()); + } + + throw new \InvalidArgumentException('Invalid property '.$name); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/SyslogHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/SyslogHandler.php new file mode 100644 index 00000000..65a505dd --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/SyslogHandler.php @@ -0,0 +1,67 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Logger; + +/** + * Logs to syslog service. + * + * usage example: + * + * $log = new Logger('application'); + * $syslog = new SyslogHandler('myfacility', 'local6'); + * $formatter = new LineFormatter("%channel%.%level_name%: %message% %extra%"); + * $syslog->setFormatter($formatter); + * $log->pushHandler($syslog); + * + * @author Sven Paulus + */ +class SyslogHandler extends AbstractSyslogHandler +{ + protected $ident; + protected $logopts; + + /** + * @param string $ident + * @param mixed $facility + * @param int $level The minimum logging level at which this handler will be triggered + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + * @param int $logopts Option flags for the openlog() call, defaults to LOG_PID + */ + public function __construct($ident, $facility = LOG_USER, $level = Logger::DEBUG, $bubble = true, $logopts = LOG_PID) + { + parent::__construct($facility, $level, $bubble); + + $this->ident = $ident; + $this->logopts = $logopts; + } + + /** + * {@inheritdoc} + */ + public function close() + { + closelog(); + } + + /** + * {@inheritdoc} + */ + protected function write(array $record) + { + if (!openlog($this->ident, $this->logopts, $this->facility)) { + throw new \LogicException('Can\'t open syslog for ident "'.$this->ident.'" and facility "'.$this->facility.'"'); + } + syslog($this->logLevels[$record['level']], (string) $record['formatted']); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/SyslogUdp/UdpSocket.php b/vendor/monolog/monolog/src/Monolog/Handler/SyslogUdp/UdpSocket.php new file mode 100644 index 00000000..85ed9d98 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/SyslogUdp/UdpSocket.php @@ -0,0 +1,56 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler\SyslogUdp; + +class UdpSocket +{ + const DATAGRAM_MAX_LENGTH = 65023; + + protected $ip; + protected $port; + protected $socket; + + public function __construct($ip, $port = 514) + { + $this->ip = $ip; + $this->port = $port; + $this->socket = socket_create(AF_INET, SOCK_DGRAM, SOL_UDP); + } + + public function write($line, $header = "") + { + $this->send($this->assembleMessage($line, $header)); + } + + public function close() + { + if (is_resource($this->socket)) { + socket_close($this->socket); + $this->socket = null; + } + } + + protected function send($chunk) + { + if (!is_resource($this->socket)) { + throw new \LogicException('The UdpSocket to '.$this->ip.':'.$this->port.' has been closed and can not be written to anymore'); + } + socket_sendto($this->socket, $chunk, strlen($chunk), $flags = 0, $this->ip, $this->port); + } + + protected function assembleMessage($line, $header) + { + $chunkSize = self::DATAGRAM_MAX_LENGTH - strlen($header); + + return $header . substr($line, 0, $chunkSize); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/SyslogUdpHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/SyslogUdpHandler.php new file mode 100644 index 00000000..7cd234dc --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/SyslogUdpHandler.php @@ -0,0 +1,124 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Logger; +use Monolog\Handler\SyslogUdp\UdpSocket; + +/** + * A Handler for logging to a remote syslogd server. + * + * @author Jesper Skovgaard Nielsen + * @author Dominik Kukacka + */ +class SyslogUdpHandler extends AbstractSyslogHandler +{ + const RFC3164 = 0; + const RFC5424 = 1; + + private $dateFormats = array( + self::RFC3164 => 'M d H:i:s', + self::RFC5424 => \DateTime::RFC3339, + ); + + protected $socket; + protected $ident; + protected $rfc; + + /** + * @param string $host + * @param int $port + * @param mixed $facility + * @param int $level The minimum logging level at which this handler will be triggered + * @param bool $bubble Whether the messages that are handled can bubble up the stack or not + * @param string $ident Program name or tag for each log message. + * @param int $rfc RFC to format the message for. + */ + public function __construct($host, $port = 514, $facility = LOG_USER, $level = Logger::DEBUG, $bubble = true, $ident = 'php', $rfc = self::RFC5424) + { + parent::__construct($facility, $level, $bubble); + + $this->ident = $ident; + $this->rfc = $rfc; + + $this->socket = new UdpSocket($host, $port ?: 514); + } + + protected function write(array $record) + { + $lines = $this->splitMessageIntoLines($record['formatted']); + + $header = $this->makeCommonSyslogHeader($this->logLevels[$record['level']]); + + foreach ($lines as $line) { + $this->socket->write($line, $header); + } + } + + public function close() + { + $this->socket->close(); + } + + private function splitMessageIntoLines($message) + { + if (is_array($message)) { + $message = implode("\n", $message); + } + + return preg_split('/$\R?^/m', $message, -1, PREG_SPLIT_NO_EMPTY); + } + + /** + * Make common syslog header (see rfc5424 or rfc3164) + */ + protected function makeCommonSyslogHeader($severity) + { + $priority = $severity + $this->facility; + + if (!$pid = getmypid()) { + $pid = '-'; + } + + if (!$hostname = gethostname()) { + $hostname = '-'; + } + + $date = $this->getDateTime(); + + if ($this->rfc === self::RFC3164) { + return "<$priority>" . + $date . " " . + $hostname . " " . + $this->ident . "[" . $pid . "]: "; + } else { + return "<$priority>1 " . + $date . " " . + $hostname . " " . + $this->ident . " " . + $pid . " - - "; + } + } + + protected function getDateTime() + { + return date($this->dateFormats[$this->rfc]); + } + + /** + * Inject your own socket, mainly used for testing + */ + public function setSocket($socket) + { + $this->socket = $socket; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/TestHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/TestHandler.php new file mode 100644 index 00000000..0fc310f8 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/TestHandler.php @@ -0,0 +1,177 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +/** + * Used for testing purposes. + * + * It records all records and gives you access to them for verification. + * + * @author Jordi Boggiano + * + * @method bool hasEmergency($record) + * @method bool hasAlert($record) + * @method bool hasCritical($record) + * @method bool hasError($record) + * @method bool hasWarning($record) + * @method bool hasNotice($record) + * @method bool hasInfo($record) + * @method bool hasDebug($record) + * + * @method bool hasEmergencyRecords() + * @method bool hasAlertRecords() + * @method bool hasCriticalRecords() + * @method bool hasErrorRecords() + * @method bool hasWarningRecords() + * @method bool hasNoticeRecords() + * @method bool hasInfoRecords() + * @method bool hasDebugRecords() + * + * @method bool hasEmergencyThatContains($message) + * @method bool hasAlertThatContains($message) + * @method bool hasCriticalThatContains($message) + * @method bool hasErrorThatContains($message) + * @method bool hasWarningThatContains($message) + * @method bool hasNoticeThatContains($message) + * @method bool hasInfoThatContains($message) + * @method bool hasDebugThatContains($message) + * + * @method bool hasEmergencyThatMatches($message) + * @method bool hasAlertThatMatches($message) + * @method bool hasCriticalThatMatches($message) + * @method bool hasErrorThatMatches($message) + * @method bool hasWarningThatMatches($message) + * @method bool hasNoticeThatMatches($message) + * @method bool hasInfoThatMatches($message) + * @method bool hasDebugThatMatches($message) + * + * @method bool hasEmergencyThatPasses($message) + * @method bool hasAlertThatPasses($message) + * @method bool hasCriticalThatPasses($message) + * @method bool hasErrorThatPasses($message) + * @method bool hasWarningThatPasses($message) + * @method bool hasNoticeThatPasses($message) + * @method bool hasInfoThatPasses($message) + * @method bool hasDebugThatPasses($message) + */ +class TestHandler extends AbstractProcessingHandler +{ + protected $records = array(); + protected $recordsByLevel = array(); + private $skipReset = false; + + public function getRecords() + { + return $this->records; + } + + public function clear() + { + $this->records = array(); + $this->recordsByLevel = array(); + } + + public function reset() + { + if (!$this->skipReset) { + $this->clear(); + } + } + + public function setSkipReset($skipReset) + { + $this->skipReset = $skipReset; + } + + public function hasRecords($level) + { + return isset($this->recordsByLevel[$level]); + } + + /** + * @param string|array $record Either a message string or an array containing message and optionally context keys that will be checked against all records + * @param int $level Logger::LEVEL constant value + */ + public function hasRecord($record, $level) + { + if (is_string($record)) { + $record = array('message' => $record); + } + + return $this->hasRecordThatPasses(function ($rec) use ($record) { + if ($rec['message'] !== $record['message']) { + return false; + } + if (isset($record['context']) && $rec['context'] !== $record['context']) { + return false; + } + return true; + }, $level); + } + + public function hasRecordThatContains($message, $level) + { + return $this->hasRecordThatPasses(function ($rec) use ($message) { + return strpos($rec['message'], $message) !== false; + }, $level); + } + + public function hasRecordThatMatches($regex, $level) + { + return $this->hasRecordThatPasses(function ($rec) use ($regex) { + return preg_match($regex, $rec['message']) > 0; + }, $level); + } + + public function hasRecordThatPasses($predicate, $level) + { + if (!is_callable($predicate)) { + throw new \InvalidArgumentException("Expected a callable for hasRecordThatSucceeds"); + } + + if (!isset($this->recordsByLevel[$level])) { + return false; + } + + foreach ($this->recordsByLevel[$level] as $i => $rec) { + if (call_user_func($predicate, $rec, $i)) { + return true; + } + } + + return false; + } + + /** + * {@inheritdoc} + */ + protected function write(array $record) + { + $this->recordsByLevel[$record['level']][] = $record; + $this->records[] = $record; + } + + public function __call($method, $args) + { + if (preg_match('/(.*)(Debug|Info|Notice|Warning|Error|Critical|Alert|Emergency)(.*)/', $method, $matches) > 0) { + $genericMethod = $matches[1] . ('Records' !== $matches[3] ? 'Record' : '') . $matches[3]; + $level = constant('Monolog\Logger::' . strtoupper($matches[2])); + if (method_exists($this, $genericMethod)) { + $args[] = $level; + + return call_user_func_array(array($this, $genericMethod), $args); + } + } + + throw new \BadMethodCallException('Call to undefined method ' . get_class($this) . '::' . $method . '()'); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/WhatFailureGroupHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/WhatFailureGroupHandler.php new file mode 100644 index 00000000..140b0eec --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/WhatFailureGroupHandler.php @@ -0,0 +1,72 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +/** + * Forwards records to multiple handlers suppressing failures of each handler + * and continuing through to give every handler a chance to succeed. + * + * @author Craig D'Amelio + */ +class WhatFailureGroupHandler extends GroupHandler +{ + /** + * {@inheritdoc} + */ + public function handle(array $record) + { + if ($this->processors) { + foreach ($this->processors as $processor) { + $record = call_user_func($processor, $record); + } + } + + foreach ($this->handlers as $handler) { + try { + $handler->handle($record); + } catch (\Exception $e) { + // What failure? + } catch (\Throwable $e) { + // What failure? + } + } + + return false === $this->bubble; + } + + /** + * {@inheritdoc} + */ + public function handleBatch(array $records) + { + if ($this->processors) { + $processed = array(); + foreach ($records as $record) { + foreach ($this->processors as $processor) { + $record = call_user_func($processor, $record); + } + $processed[] = $record; + } + $records = $processed; + } + + foreach ($this->handlers as $handler) { + try { + $handler->handleBatch($records); + } catch (\Exception $e) { + // What failure? + } catch (\Throwable $e) { + // What failure? + } + } + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Handler/ZendMonitorHandler.php b/vendor/monolog/monolog/src/Monolog/Handler/ZendMonitorHandler.php new file mode 100644 index 00000000..02039a27 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Handler/ZendMonitorHandler.php @@ -0,0 +1,101 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Handler; + +use Monolog\Formatter\NormalizerFormatter; +use Monolog\Logger; + +/** + * Handler sending logs to Zend Monitor + * + * @author Christian Bergau + * @author Jason Davis + */ +class ZendMonitorHandler extends AbstractProcessingHandler +{ + /** + * Monolog level / ZendMonitor Custom Event priority map + * + * @var array + */ + protected $levelMap = array(); + + /** + * Construct + * + * @param int $level + * @param bool $bubble + * @throws MissingExtensionException + */ + public function __construct($level = Logger::DEBUG, $bubble = true) + { + if (!function_exists('zend_monitor_custom_event')) { + throw new MissingExtensionException( + 'You must have Zend Server installed with Zend Monitor enabled in order to use this handler' + ); + } + //zend monitor constants are not defined if zend monitor is not enabled. + $this->levelMap = array( + Logger::DEBUG => \ZEND_MONITOR_EVENT_SEVERITY_INFO, + Logger::INFO => \ZEND_MONITOR_EVENT_SEVERITY_INFO, + Logger::NOTICE => \ZEND_MONITOR_EVENT_SEVERITY_INFO, + Logger::WARNING => \ZEND_MONITOR_EVENT_SEVERITY_WARNING, + Logger::ERROR => \ZEND_MONITOR_EVENT_SEVERITY_ERROR, + Logger::CRITICAL => \ZEND_MONITOR_EVENT_SEVERITY_ERROR, + Logger::ALERT => \ZEND_MONITOR_EVENT_SEVERITY_ERROR, + Logger::EMERGENCY => \ZEND_MONITOR_EVENT_SEVERITY_ERROR, + ); + parent::__construct($level, $bubble); + } + + /** + * {@inheritdoc} + */ + protected function write(array $record) + { + $this->writeZendMonitorCustomEvent( + Logger::getLevelName($record['level']), + $record['message'], + $record['formatted'], + $this->levelMap[$record['level']] + ); + } + + /** + * Write to Zend Monitor Events + * @param string $type Text displayed in "Class Name (custom)" field + * @param string $message Text displayed in "Error String" + * @param mixed $formatted Displayed in Custom Variables tab + * @param int $severity Set the event severity level (-1,0,1) + */ + protected function writeZendMonitorCustomEvent($type, $message, $formatted, $severity) + { + zend_monitor_custom_event($type, $message, $formatted, $severity); + } + + /** + * {@inheritdoc} + */ + public function getDefaultFormatter() + { + return new NormalizerFormatter(); + } + + /** + * Get the level map + * + * @return array + */ + public function getLevelMap() + { + return $this->levelMap; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Logger.php b/vendor/monolog/monolog/src/Monolog/Logger.php new file mode 100644 index 00000000..8bccedc4 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Logger.php @@ -0,0 +1,796 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog; + +use Monolog\Handler\HandlerInterface; +use Monolog\Handler\StreamHandler; +use Psr\Log\LoggerInterface; +use Psr\Log\InvalidArgumentException; +use Exception; + +/** + * Monolog log channel + * + * It contains a stack of Handlers and a stack of Processors, + * and uses them to store records that are added to it. + * + * @author Jordi Boggiano + */ +class Logger implements LoggerInterface, ResettableInterface +{ + /** + * Detailed debug information + */ + const DEBUG = 100; + + /** + * Interesting events + * + * Examples: User logs in, SQL logs. + */ + const INFO = 200; + + /** + * Uncommon events + */ + const NOTICE = 250; + + /** + * Exceptional occurrences that are not errors + * + * Examples: Use of deprecated APIs, poor use of an API, + * undesirable things that are not necessarily wrong. + */ + const WARNING = 300; + + /** + * Runtime errors + */ + const ERROR = 400; + + /** + * Critical conditions + * + * Example: Application component unavailable, unexpected exception. + */ + const CRITICAL = 500; + + /** + * Action must be taken immediately + * + * Example: Entire website down, database unavailable, etc. + * This should trigger the SMS alerts and wake you up. + */ + const ALERT = 550; + + /** + * Urgent alert. + */ + const EMERGENCY = 600; + + /** + * Monolog API version + * + * This is only bumped when API breaks are done and should + * follow the major version of the library + * + * @var int + */ + const API = 1; + + /** + * Logging levels from syslog protocol defined in RFC 5424 + * + * @var array $levels Logging levels + */ + protected static $levels = array( + self::DEBUG => 'DEBUG', + self::INFO => 'INFO', + self::NOTICE => 'NOTICE', + self::WARNING => 'WARNING', + self::ERROR => 'ERROR', + self::CRITICAL => 'CRITICAL', + self::ALERT => 'ALERT', + self::EMERGENCY => 'EMERGENCY', + ); + + /** + * @var \DateTimeZone + */ + protected static $timezone; + + /** + * @var string + */ + protected $name; + + /** + * The handler stack + * + * @var HandlerInterface[] + */ + protected $handlers; + + /** + * Processors that will process all log records + * + * To process records of a single handler instead, add the processor on that specific handler + * + * @var callable[] + */ + protected $processors; + + /** + * @var bool + */ + protected $microsecondTimestamps = true; + + /** + * @var callable + */ + protected $exceptionHandler; + + /** + * @param string $name The logging channel + * @param HandlerInterface[] $handlers Optional stack of handlers, the first one in the array is called first, etc. + * @param callable[] $processors Optional array of processors + */ + public function __construct($name, array $handlers = array(), array $processors = array()) + { + $this->name = $name; + $this->setHandlers($handlers); + $this->processors = $processors; + } + + /** + * @return string + */ + public function getName() + { + return $this->name; + } + + /** + * Return a new cloned instance with the name changed + * + * @return static + */ + public function withName($name) + { + $new = clone $this; + $new->name = $name; + + return $new; + } + + /** + * Pushes a handler on to the stack. + * + * @param HandlerInterface $handler + * @return $this + */ + public function pushHandler(HandlerInterface $handler) + { + array_unshift($this->handlers, $handler); + + return $this; + } + + /** + * Pops a handler from the stack + * + * @return HandlerInterface + */ + public function popHandler() + { + if (!$this->handlers) { + throw new \LogicException('You tried to pop from an empty handler stack.'); + } + + return array_shift($this->handlers); + } + + /** + * Set handlers, replacing all existing ones. + * + * If a map is passed, keys will be ignored. + * + * @param HandlerInterface[] $handlers + * @return $this + */ + public function setHandlers(array $handlers) + { + $this->handlers = array(); + foreach (array_reverse($handlers) as $handler) { + $this->pushHandler($handler); + } + + return $this; + } + + /** + * @return HandlerInterface[] + */ + public function getHandlers() + { + return $this->handlers; + } + + /** + * Adds a processor on to the stack. + * + * @param callable $callback + * @return $this + */ + public function pushProcessor($callback) + { + if (!is_callable($callback)) { + throw new \InvalidArgumentException('Processors must be valid callables (callback or object with an __invoke method), '.var_export($callback, true).' given'); + } + array_unshift($this->processors, $callback); + + return $this; + } + + /** + * Removes the processor on top of the stack and returns it. + * + * @return callable + */ + public function popProcessor() + { + if (!$this->processors) { + throw new \LogicException('You tried to pop from an empty processor stack.'); + } + + return array_shift($this->processors); + } + + /** + * @return callable[] + */ + public function getProcessors() + { + return $this->processors; + } + + /** + * Control the use of microsecond resolution timestamps in the 'datetime' + * member of new records. + * + * Generating microsecond resolution timestamps by calling + * microtime(true), formatting the result via sprintf() and then parsing + * the resulting string via \DateTime::createFromFormat() can incur + * a measurable runtime overhead vs simple usage of DateTime to capture + * a second resolution timestamp in systems which generate a large number + * of log events. + * + * @param bool $micro True to use microtime() to create timestamps + */ + public function useMicrosecondTimestamps($micro) + { + $this->microsecondTimestamps = (bool) $micro; + } + + /** + * Adds a log record. + * + * @param int $level The logging level + * @param string $message The log message + * @param array $context The log context + * @return bool Whether the record has been processed + */ + public function addRecord($level, $message, array $context = array()) + { + if (!$this->handlers) { + $this->pushHandler(new StreamHandler('php://stderr', static::DEBUG)); + } + + $levelName = static::getLevelName($level); + + // check if any handler will handle this message so we can return early and save cycles + $handlerKey = null; + reset($this->handlers); + while ($handler = current($this->handlers)) { + if ($handler->isHandling(array('level' => $level))) { + $handlerKey = key($this->handlers); + break; + } + + next($this->handlers); + } + + if (null === $handlerKey) { + return false; + } + + if (!static::$timezone) { + static::$timezone = new \DateTimeZone(date_default_timezone_get() ?: 'UTC'); + } + + // php7.1+ always has microseconds enabled, so we do not need this hack + if ($this->microsecondTimestamps && PHP_VERSION_ID < 70100) { + $ts = \DateTime::createFromFormat('U.u', sprintf('%.6F', microtime(true)), static::$timezone); + } else { + $ts = new \DateTime(null, static::$timezone); + } + $ts->setTimezone(static::$timezone); + + $record = array( + 'message' => (string) $message, + 'context' => $context, + 'level' => $level, + 'level_name' => $levelName, + 'channel' => $this->name, + 'datetime' => $ts, + 'extra' => array(), + ); + + try { + foreach ($this->processors as $processor) { + $record = call_user_func($processor, $record); + } + + while ($handler = current($this->handlers)) { + if (true === $handler->handle($record)) { + break; + } + + next($this->handlers); + } + } catch (Exception $e) { + $this->handleException($e, $record); + } + + return true; + } + + /** + * Ends a log cycle and frees all resources used by handlers. + * + * Closing a Handler means flushing all buffers and freeing any open resources/handles. + * Handlers that have been closed should be able to accept log records again and re-open + * themselves on demand, but this may not always be possible depending on implementation. + * + * This is useful at the end of a request and will be called automatically on every handler + * when they get destructed. + */ + public function close() + { + foreach ($this->handlers as $handler) { + if (method_exists($handler, 'close')) { + $handler->close(); + } + } + } + + /** + * Ends a log cycle and resets all handlers and processors to their initial state. + * + * Resetting a Handler or a Processor means flushing/cleaning all buffers, resetting internal + * state, and getting it back to a state in which it can receive log records again. + * + * This is useful in case you want to avoid logs leaking between two requests or jobs when you + * have a long running process like a worker or an application server serving multiple requests + * in one process. + */ + public function reset() + { + foreach ($this->handlers as $handler) { + if ($handler instanceof ResettableInterface) { + $handler->reset(); + } + } + + foreach ($this->processors as $processor) { + if ($processor instanceof ResettableInterface) { + $processor->reset(); + } + } + } + + /** + * Adds a log record at the DEBUG level. + * + * @param string $message The log message + * @param array $context The log context + * @return bool Whether the record has been processed + */ + public function addDebug($message, array $context = array()) + { + return $this->addRecord(static::DEBUG, $message, $context); + } + + /** + * Adds a log record at the INFO level. + * + * @param string $message The log message + * @param array $context The log context + * @return bool Whether the record has been processed + */ + public function addInfo($message, array $context = array()) + { + return $this->addRecord(static::INFO, $message, $context); + } + + /** + * Adds a log record at the NOTICE level. + * + * @param string $message The log message + * @param array $context The log context + * @return bool Whether the record has been processed + */ + public function addNotice($message, array $context = array()) + { + return $this->addRecord(static::NOTICE, $message, $context); + } + + /** + * Adds a log record at the WARNING level. + * + * @param string $message The log message + * @param array $context The log context + * @return bool Whether the record has been processed + */ + public function addWarning($message, array $context = array()) + { + return $this->addRecord(static::WARNING, $message, $context); + } + + /** + * Adds a log record at the ERROR level. + * + * @param string $message The log message + * @param array $context The log context + * @return bool Whether the record has been processed + */ + public function addError($message, array $context = array()) + { + return $this->addRecord(static::ERROR, $message, $context); + } + + /** + * Adds a log record at the CRITICAL level. + * + * @param string $message The log message + * @param array $context The log context + * @return bool Whether the record has been processed + */ + public function addCritical($message, array $context = array()) + { + return $this->addRecord(static::CRITICAL, $message, $context); + } + + /** + * Adds a log record at the ALERT level. + * + * @param string $message The log message + * @param array $context The log context + * @return bool Whether the record has been processed + */ + public function addAlert($message, array $context = array()) + { + return $this->addRecord(static::ALERT, $message, $context); + } + + /** + * Adds a log record at the EMERGENCY level. + * + * @param string $message The log message + * @param array $context The log context + * @return bool Whether the record has been processed + */ + public function addEmergency($message, array $context = array()) + { + return $this->addRecord(static::EMERGENCY, $message, $context); + } + + /** + * Gets all supported logging levels. + * + * @return array Assoc array with human-readable level names => level codes. + */ + public static function getLevels() + { + return array_flip(static::$levels); + } + + /** + * Gets the name of the logging level. + * + * @param int $level + * @return string + */ + public static function getLevelName($level) + { + if (!isset(static::$levels[$level])) { + throw new InvalidArgumentException('Level "'.$level.'" is not defined, use one of: '.implode(', ', array_keys(static::$levels))); + } + + return static::$levels[$level]; + } + + /** + * Converts PSR-3 levels to Monolog ones if necessary + * + * @param string|int Level number (monolog) or name (PSR-3) + * @return int + */ + public static function toMonologLevel($level) + { + if (is_string($level)) { + // Contains chars of all log levels and avoids using strtoupper() which may have + // strange results depending on locale (for example, "i" will become "İ") + $upper = strtr($level, 'abcdefgilmnortuwy', 'ABCDEFGILMNORTUWY'); + if (defined(__CLASS__.'::'.$upper)) { + return constant(__CLASS__ . '::' . $upper); + } + } + + return $level; + } + + /** + * Checks whether the Logger has a handler that listens on the given level + * + * @param int $level + * @return bool + */ + public function isHandling($level) + { + $record = array( + 'level' => $level, + ); + + foreach ($this->handlers as $handler) { + if ($handler->isHandling($record)) { + return true; + } + } + + return false; + } + + /** + * Set a custom exception handler + * + * @param callable $callback + * @return $this + */ + public function setExceptionHandler($callback) + { + if (!is_callable($callback)) { + throw new \InvalidArgumentException('Exception handler must be valid callable (callback or object with an __invoke method), '.var_export($callback, true).' given'); + } + $this->exceptionHandler = $callback; + + return $this; + } + + /** + * @return callable + */ + public function getExceptionHandler() + { + return $this->exceptionHandler; + } + + /** + * Delegates exception management to the custom exception handler, + * or throws the exception if no custom handler is set. + */ + protected function handleException(Exception $e, array $record) + { + if (!$this->exceptionHandler) { + throw $e; + } + + call_user_func($this->exceptionHandler, $e, $record); + } + + /** + * Adds a log record at an arbitrary level. + * + * This method allows for compatibility with common interfaces. + * + * @param mixed $level The log level + * @param string $message The log message + * @param array $context The log context + * @return bool Whether the record has been processed + */ + public function log($level, $message, array $context = array()) + { + $level = static::toMonologLevel($level); + + return $this->addRecord($level, $message, $context); + } + + /** + * Adds a log record at the DEBUG level. + * + * This method allows for compatibility with common interfaces. + * + * @param string $message The log message + * @param array $context The log context + * @return bool Whether the record has been processed + */ + public function debug($message, array $context = array()) + { + return $this->addRecord(static::DEBUG, $message, $context); + } + + /** + * Adds a log record at the INFO level. + * + * This method allows for compatibility with common interfaces. + * + * @param string $message The log message + * @param array $context The log context + * @return bool Whether the record has been processed + */ + public function info($message, array $context = array()) + { + return $this->addRecord(static::INFO, $message, $context); + } + + /** + * Adds a log record at the NOTICE level. + * + * This method allows for compatibility with common interfaces. + * + * @param string $message The log message + * @param array $context The log context + * @return bool Whether the record has been processed + */ + public function notice($message, array $context = array()) + { + return $this->addRecord(static::NOTICE, $message, $context); + } + + /** + * Adds a log record at the WARNING level. + * + * This method allows for compatibility with common interfaces. + * + * @param string $message The log message + * @param array $context The log context + * @return bool Whether the record has been processed + */ + public function warn($message, array $context = array()) + { + return $this->addRecord(static::WARNING, $message, $context); + } + + /** + * Adds a log record at the WARNING level. + * + * This method allows for compatibility with common interfaces. + * + * @param string $message The log message + * @param array $context The log context + * @return bool Whether the record has been processed + */ + public function warning($message, array $context = array()) + { + return $this->addRecord(static::WARNING, $message, $context); + } + + /** + * Adds a log record at the ERROR level. + * + * This method allows for compatibility with common interfaces. + * + * @param string $message The log message + * @param array $context The log context + * @return bool Whether the record has been processed + */ + public function err($message, array $context = array()) + { + return $this->addRecord(static::ERROR, $message, $context); + } + + /** + * Adds a log record at the ERROR level. + * + * This method allows for compatibility with common interfaces. + * + * @param string $message The log message + * @param array $context The log context + * @return bool Whether the record has been processed + */ + public function error($message, array $context = array()) + { + return $this->addRecord(static::ERROR, $message, $context); + } + + /** + * Adds a log record at the CRITICAL level. + * + * This method allows for compatibility with common interfaces. + * + * @param string $message The log message + * @param array $context The log context + * @return bool Whether the record has been processed + */ + public function crit($message, array $context = array()) + { + return $this->addRecord(static::CRITICAL, $message, $context); + } + + /** + * Adds a log record at the CRITICAL level. + * + * This method allows for compatibility with common interfaces. + * + * @param string $message The log message + * @param array $context The log context + * @return bool Whether the record has been processed + */ + public function critical($message, array $context = array()) + { + return $this->addRecord(static::CRITICAL, $message, $context); + } + + /** + * Adds a log record at the ALERT level. + * + * This method allows for compatibility with common interfaces. + * + * @param string $message The log message + * @param array $context The log context + * @return bool Whether the record has been processed + */ + public function alert($message, array $context = array()) + { + return $this->addRecord(static::ALERT, $message, $context); + } + + /** + * Adds a log record at the EMERGENCY level. + * + * This method allows for compatibility with common interfaces. + * + * @param string $message The log message + * @param array $context The log context + * @return bool Whether the record has been processed + */ + public function emerg($message, array $context = array()) + { + return $this->addRecord(static::EMERGENCY, $message, $context); + } + + /** + * Adds a log record at the EMERGENCY level. + * + * This method allows for compatibility with common interfaces. + * + * @param string $message The log message + * @param array $context The log context + * @return bool Whether the record has been processed + */ + public function emergency($message, array $context = array()) + { + return $this->addRecord(static::EMERGENCY, $message, $context); + } + + /** + * Set the timezone to be used for the timestamp of log records. + * + * This is stored globally for all Logger instances + * + * @param \DateTimeZone $tz Timezone object + */ + public static function setTimezone(\DateTimeZone $tz) + { + self::$timezone = $tz; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Processor/GitProcessor.php b/vendor/monolog/monolog/src/Monolog/Processor/GitProcessor.php new file mode 100644 index 00000000..321102ec --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Processor/GitProcessor.php @@ -0,0 +1,64 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Processor; + +use Monolog\Logger; + +/** + * Injects Git branch and Git commit SHA in all records + * + * @author Nick Otter + * @author Jordi Boggiano + */ +class GitProcessor implements ProcessorInterface +{ + private $level; + private static $cache; + + public function __construct($level = Logger::DEBUG) + { + $this->level = Logger::toMonologLevel($level); + } + + /** + * @param array $record + * @return array + */ + public function __invoke(array $record) + { + // return if the level is not high enough + if ($record['level'] < $this->level) { + return $record; + } + + $record['extra']['git'] = self::getGitInfo(); + + return $record; + } + + private static function getGitInfo() + { + if (self::$cache) { + return self::$cache; + } + + $branches = `git branch -v --no-abbrev`; + if (preg_match('{^\* (.+?)\s+([a-f0-9]{40})(?:\s|$)}m', $branches, $matches)) { + return self::$cache = array( + 'branch' => $matches[1], + 'commit' => $matches[2], + ); + } + + return self::$cache = array(); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Processor/IntrospectionProcessor.php b/vendor/monolog/monolog/src/Monolog/Processor/IntrospectionProcessor.php new file mode 100644 index 00000000..7ca90ada --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Processor/IntrospectionProcessor.php @@ -0,0 +1,112 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Processor; + +use Monolog\Logger; + +/** + * Injects line/file:class/function where the log message came from + * + * Warning: This only works if the handler processes the logs directly. + * If you put the processor on a handler that is behind a FingersCrossedHandler + * for example, the processor will only be called once the trigger level is reached, + * and all the log records will have the same file/line/.. data from the call that + * triggered the FingersCrossedHandler. + * + * @author Jordi Boggiano + */ +class IntrospectionProcessor implements ProcessorInterface +{ + private $level; + + private $skipClassesPartials; + + private $skipStackFramesCount; + + private $skipFunctions = array( + 'call_user_func', + 'call_user_func_array', + ); + + public function __construct($level = Logger::DEBUG, array $skipClassesPartials = array(), $skipStackFramesCount = 0) + { + $this->level = Logger::toMonologLevel($level); + $this->skipClassesPartials = array_merge(array('Monolog\\'), $skipClassesPartials); + $this->skipStackFramesCount = $skipStackFramesCount; + } + + /** + * @param array $record + * @return array + */ + public function __invoke(array $record) + { + // return if the level is not high enough + if ($record['level'] < $this->level) { + return $record; + } + + /* + * http://php.net/manual/en/function.debug-backtrace.php + * As of 5.3.6, DEBUG_BACKTRACE_IGNORE_ARGS option was added. + * Any version less than 5.3.6 must use the DEBUG_BACKTRACE_IGNORE_ARGS constant value '2'. + */ + $trace = debug_backtrace((PHP_VERSION_ID < 50306) ? 2 : DEBUG_BACKTRACE_IGNORE_ARGS); + + // skip first since it's always the current method + array_shift($trace); + // the call_user_func call is also skipped + array_shift($trace); + + $i = 0; + + while ($this->isTraceClassOrSkippedFunction($trace, $i)) { + if (isset($trace[$i]['class'])) { + foreach ($this->skipClassesPartials as $part) { + if (strpos($trace[$i]['class'], $part) !== false) { + $i++; + continue 2; + } + } + } elseif (in_array($trace[$i]['function'], $this->skipFunctions)) { + $i++; + continue; + } + + break; + } + + $i += $this->skipStackFramesCount; + + // we should have the call source now + $record['extra'] = array_merge( + $record['extra'], + array( + 'file' => isset($trace[$i - 1]['file']) ? $trace[$i - 1]['file'] : null, + 'line' => isset($trace[$i - 1]['line']) ? $trace[$i - 1]['line'] : null, + 'class' => isset($trace[$i]['class']) ? $trace[$i]['class'] : null, + 'function' => isset($trace[$i]['function']) ? $trace[$i]['function'] : null, + ) + ); + + return $record; + } + + private function isTraceClassOrSkippedFunction(array $trace, $index) + { + if (!isset($trace[$index])) { + return false; + } + + return isset($trace[$index]['class']) || in_array($trace[$index]['function'], $this->skipFunctions); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Processor/MemoryPeakUsageProcessor.php b/vendor/monolog/monolog/src/Monolog/Processor/MemoryPeakUsageProcessor.php new file mode 100644 index 00000000..0514e66b --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Processor/MemoryPeakUsageProcessor.php @@ -0,0 +1,35 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Processor; + +/** + * Injects memory_get_peak_usage in all records + * + * @see Monolog\Processor\MemoryProcessor::__construct() for options + * @author Rob Jensen + */ +class MemoryPeakUsageProcessor extends MemoryProcessor +{ + /** + * @param array $record + * @return array + */ + public function __invoke(array $record) + { + $bytes = memory_get_peak_usage($this->realUsage); + $formatted = $this->formatBytes($bytes); + + $record['extra']['memory_peak_usage'] = $formatted; + + return $record; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Processor/MemoryProcessor.php b/vendor/monolog/monolog/src/Monolog/Processor/MemoryProcessor.php new file mode 100644 index 00000000..b4d20820 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Processor/MemoryProcessor.php @@ -0,0 +1,63 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Processor; + +/** + * Some methods that are common for all memory processors + * + * @author Rob Jensen + */ +abstract class MemoryProcessor implements ProcessorInterface +{ + /** + * @var bool If true, get the real size of memory allocated from system. Else, only the memory used by emalloc() is reported. + */ + protected $realUsage; + + /** + * @var bool If true, then format memory size to human readable string (MB, KB, B depending on size) + */ + protected $useFormatting; + + /** + * @param bool $realUsage Set this to true to get the real size of memory allocated from system. + * @param bool $useFormatting If true, then format memory size to human readable string (MB, KB, B depending on size) + */ + public function __construct($realUsage = true, $useFormatting = true) + { + $this->realUsage = (bool) $realUsage; + $this->useFormatting = (bool) $useFormatting; + } + + /** + * Formats bytes into a human readable string if $this->useFormatting is true, otherwise return $bytes as is + * + * @param int $bytes + * @return string|int Formatted string if $this->useFormatting is true, otherwise return $bytes as is + */ + protected function formatBytes($bytes) + { + $bytes = (int) $bytes; + + if (!$this->useFormatting) { + return $bytes; + } + + if ($bytes > 1024 * 1024) { + return round($bytes / 1024 / 1024, 2).' MB'; + } elseif ($bytes > 1024) { + return round($bytes / 1024, 2).' KB'; + } + + return $bytes . ' B'; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Processor/MemoryUsageProcessor.php b/vendor/monolog/monolog/src/Monolog/Processor/MemoryUsageProcessor.php new file mode 100644 index 00000000..2bd7596c --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Processor/MemoryUsageProcessor.php @@ -0,0 +1,35 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Processor; + +/** + * Injects memory_get_usage in all records + * + * @see Monolog\Processor\MemoryProcessor::__construct() for options + * @author Rob Jensen + */ +class MemoryUsageProcessor extends MemoryProcessor +{ + /** + * @param array $record + * @return array + */ + public function __invoke(array $record) + { + $bytes = memory_get_usage($this->realUsage); + $formatted = $this->formatBytes($bytes); + + $record['extra']['memory_usage'] = $formatted; + + return $record; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Processor/MercurialProcessor.php b/vendor/monolog/monolog/src/Monolog/Processor/MercurialProcessor.php new file mode 100644 index 00000000..3456e938 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Processor/MercurialProcessor.php @@ -0,0 +1,63 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Processor; + +use Monolog\Logger; + +/** + * Injects Hg branch and Hg revision number in all records + * + * @author Jonathan A. Schweder + */ +class MercurialProcessor implements ProcessorInterface +{ + private $level; + private static $cache; + + public function __construct($level = Logger::DEBUG) + { + $this->level = Logger::toMonologLevel($level); + } + + /** + * @param array $record + * @return array + */ + public function __invoke(array $record) + { + // return if the level is not high enough + if ($record['level'] < $this->level) { + return $record; + } + + $record['extra']['hg'] = self::getMercurialInfo(); + + return $record; + } + + private static function getMercurialInfo() + { + if (self::$cache) { + return self::$cache; + } + + $result = explode(' ', trim(`hg id -nb`)); + if (count($result) >= 3) { + return self::$cache = array( + 'branch' => $result[1], + 'revision' => $result[2], + ); + } + + return self::$cache = array(); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Processor/ProcessIdProcessor.php b/vendor/monolog/monolog/src/Monolog/Processor/ProcessIdProcessor.php new file mode 100644 index 00000000..bc280652 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Processor/ProcessIdProcessor.php @@ -0,0 +1,31 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Processor; + +/** + * Adds value of getmypid into records + * + * @author Andreas Hörnicke + */ +class ProcessIdProcessor implements ProcessorInterface +{ + /** + * @param array $record + * @return array + */ + public function __invoke(array $record) + { + $record['extra']['process_id'] = getmypid(); + + return $record; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Processor/ProcessorInterface.php b/vendor/monolog/monolog/src/Monolog/Processor/ProcessorInterface.php new file mode 100644 index 00000000..13ed9ad1 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Processor/ProcessorInterface.php @@ -0,0 +1,25 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Processor; + +/** + * An optional interface to allow labelling Monolog processors. + * + * @author Nicolas Grekas + */ +interface ProcessorInterface +{ + /** + * @return array The processed records + */ + public function __invoke(array $records); +} diff --git a/vendor/monolog/monolog/src/Monolog/Processor/PsrLogMessageProcessor.php b/vendor/monolog/monolog/src/Monolog/Processor/PsrLogMessageProcessor.php new file mode 100644 index 00000000..d5d473c3 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Processor/PsrLogMessageProcessor.php @@ -0,0 +1,50 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Processor; + +use Monolog\Utils; + +/** + * Processes a record's message according to PSR-3 rules + * + * It replaces {foo} with the value from $context['foo'] + * + * @author Jordi Boggiano + */ +class PsrLogMessageProcessor implements ProcessorInterface +{ + /** + * @param array $record + * @return array + */ + public function __invoke(array $record) + { + if (false === strpos($record['message'], '{')) { + return $record; + } + + $replacements = array(); + foreach ($record['context'] as $key => $val) { + if (is_null($val) || is_scalar($val) || (is_object($val) && method_exists($val, "__toString"))) { + $replacements['{'.$key.'}'] = $val; + } elseif (is_object($val)) { + $replacements['{'.$key.'}'] = '[object '.Utils::getClass($val).']'; + } else { + $replacements['{'.$key.'}'] = '['.gettype($val).']'; + } + } + + $record['message'] = strtr($record['message'], $replacements); + + return $record; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Processor/TagProcessor.php b/vendor/monolog/monolog/src/Monolog/Processor/TagProcessor.php new file mode 100644 index 00000000..551f8128 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Processor/TagProcessor.php @@ -0,0 +1,44 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Processor; + +/** + * Adds a tags array into record + * + * @author Martijn Riemers + */ +class TagProcessor implements ProcessorInterface +{ + private $tags; + + public function __construct(array $tags = array()) + { + $this->setTags($tags); + } + + public function addTags(array $tags = array()) + { + $this->tags = array_merge($this->tags, $tags); + } + + public function setTags(array $tags = array()) + { + $this->tags = $tags; + } + + public function __invoke(array $record) + { + $record['extra']['tags'] = $this->tags; + + return $record; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Processor/UidProcessor.php b/vendor/monolog/monolog/src/Monolog/Processor/UidProcessor.php new file mode 100644 index 00000000..300674f0 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Processor/UidProcessor.php @@ -0,0 +1,59 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Processor; + +use Monolog\ResettableInterface; + +/** + * Adds a unique identifier into records + * + * @author Simon Mönch + */ +class UidProcessor implements ProcessorInterface, ResettableInterface +{ + private $uid; + + public function __construct($length = 7) + { + if (!is_int($length) || $length > 32 || $length < 1) { + throw new \InvalidArgumentException('The uid length must be an integer between 1 and 32'); + } + + + $this->uid = $this->generateUid($length); + } + + public function __invoke(array $record) + { + $record['extra']['uid'] = $this->uid; + + return $record; + } + + /** + * @return string + */ + public function getUid() + { + return $this->uid; + } + + public function reset() + { + $this->uid = $this->generateUid(strlen($this->uid)); + } + + private function generateUid($length) + { + return substr(hash('md5', uniqid('', true)), 0, $length); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Processor/WebProcessor.php b/vendor/monolog/monolog/src/Monolog/Processor/WebProcessor.php new file mode 100644 index 00000000..573d5956 --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Processor/WebProcessor.php @@ -0,0 +1,113 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog\Processor; + +/** + * Injects url/method and remote IP of the current web request in all records + * + * @author Jordi Boggiano + */ +class WebProcessor implements ProcessorInterface +{ + /** + * @var array|\ArrayAccess + */ + protected $serverData; + + /** + * Default fields + * + * Array is structured as [key in record.extra => key in $serverData] + * + * @var array + */ + protected $extraFields = array( + 'url' => 'REQUEST_URI', + 'ip' => 'REMOTE_ADDR', + 'http_method' => 'REQUEST_METHOD', + 'server' => 'SERVER_NAME', + 'referrer' => 'HTTP_REFERER', + ); + + /** + * @param array|\ArrayAccess $serverData Array or object w/ ArrayAccess that provides access to the $_SERVER data + * @param array|null $extraFields Field names and the related key inside $serverData to be added. If not provided it defaults to: url, ip, http_method, server, referrer + */ + public function __construct($serverData = null, array $extraFields = null) + { + if (null === $serverData) { + $this->serverData = &$_SERVER; + } elseif (is_array($serverData) || $serverData instanceof \ArrayAccess) { + $this->serverData = $serverData; + } else { + throw new \UnexpectedValueException('$serverData must be an array or object implementing ArrayAccess.'); + } + + if (null !== $extraFields) { + if (isset($extraFields[0])) { + foreach (array_keys($this->extraFields) as $fieldName) { + if (!in_array($fieldName, $extraFields)) { + unset($this->extraFields[$fieldName]); + } + } + } else { + $this->extraFields = $extraFields; + } + } + } + + /** + * @param array $record + * @return array + */ + public function __invoke(array $record) + { + // skip processing if for some reason request data + // is not present (CLI or wonky SAPIs) + if (!isset($this->serverData['REQUEST_URI'])) { + return $record; + } + + $record['extra'] = $this->appendExtraFields($record['extra']); + + return $record; + } + + /** + * @param string $extraName + * @param string $serverName + * @return $this + */ + public function addExtraField($extraName, $serverName) + { + $this->extraFields[$extraName] = $serverName; + + return $this; + } + + /** + * @param array $extra + * @return array + */ + private function appendExtraFields(array $extra) + { + foreach ($this->extraFields as $extraName => $serverName) { + $extra[$extraName] = isset($this->serverData[$serverName]) ? $this->serverData[$serverName] : null; + } + + if (isset($this->serverData['UNIQUE_ID'])) { + $extra['unique_id'] = $this->serverData['UNIQUE_ID']; + } + + return $extra; + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Registry.php b/vendor/monolog/monolog/src/Monolog/Registry.php new file mode 100644 index 00000000..27acd44a --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Registry.php @@ -0,0 +1,134 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog; + +use InvalidArgumentException; + +/** + * Monolog log registry + * + * Allows to get `Logger` instances in the global scope + * via static method calls on this class. + * + * + * $application = new Monolog\Logger('application'); + * $api = new Monolog\Logger('api'); + * + * Monolog\Registry::addLogger($application); + * Monolog\Registry::addLogger($api); + * + * function testLogger() + * { + * Monolog\Registry::api()->addError('Sent to $api Logger instance'); + * Monolog\Registry::application()->addError('Sent to $application Logger instance'); + * } + * + * + * @author Tomas Tatarko + */ +class Registry +{ + /** + * List of all loggers in the registry (by named indexes) + * + * @var Logger[] + */ + private static $loggers = array(); + + /** + * Adds new logging channel to the registry + * + * @param Logger $logger Instance of the logging channel + * @param string|null $name Name of the logging channel ($logger->getName() by default) + * @param bool $overwrite Overwrite instance in the registry if the given name already exists? + * @throws \InvalidArgumentException If $overwrite set to false and named Logger instance already exists + */ + public static function addLogger(Logger $logger, $name = null, $overwrite = false) + { + $name = $name ?: $logger->getName(); + + if (isset(self::$loggers[$name]) && !$overwrite) { + throw new InvalidArgumentException('Logger with the given name already exists'); + } + + self::$loggers[$name] = $logger; + } + + /** + * Checks if such logging channel exists by name or instance + * + * @param string|Logger $logger Name or logger instance + */ + public static function hasLogger($logger) + { + if ($logger instanceof Logger) { + $index = array_search($logger, self::$loggers, true); + + return false !== $index; + } else { + return isset(self::$loggers[$logger]); + } + } + + /** + * Removes instance from registry by name or instance + * + * @param string|Logger $logger Name or logger instance + */ + public static function removeLogger($logger) + { + if ($logger instanceof Logger) { + if (false !== ($idx = array_search($logger, self::$loggers, true))) { + unset(self::$loggers[$idx]); + } + } else { + unset(self::$loggers[$logger]); + } + } + + /** + * Clears the registry + */ + public static function clear() + { + self::$loggers = array(); + } + + /** + * Gets Logger instance from the registry + * + * @param string $name Name of the requested Logger instance + * @throws \InvalidArgumentException If named Logger instance is not in the registry + * @return Logger Requested instance of Logger + */ + public static function getInstance($name) + { + if (!isset(self::$loggers[$name])) { + throw new InvalidArgumentException(sprintf('Requested "%s" logger instance is not in the registry', $name)); + } + + return self::$loggers[$name]; + } + + /** + * Gets Logger instance from the registry via static method call + * + * @param string $name Name of the requested Logger instance + * @param array $arguments Arguments passed to static method call + * @throws \InvalidArgumentException If named Logger instance is not in the registry + * @return Logger Requested instance of Logger + */ + public static function __callStatic($name, $arguments) + { + return self::getInstance($name); + } +} diff --git a/vendor/monolog/monolog/src/Monolog/ResettableInterface.php b/vendor/monolog/monolog/src/Monolog/ResettableInterface.php new file mode 100644 index 00000000..fc11791d --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/ResettableInterface.php @@ -0,0 +1,31 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog; + +/** + * Handler or Processor implementing this interface will be reset when Logger::reset() is called. + * + * Resetting ends a log cycle gets them back to their initial state. + * + * Resetting a Handler or a Processor means flushing/cleaning all buffers, resetting internal + * state, and getting it back to a state in which it can receive log records again. + * + * This is useful in case you want to avoid logs leaking between two requests or jobs when you + * have a long running process like a worker or an application server serving multiple requests + * in one process. + * + * @author Grégoire Pineau + */ +interface ResettableInterface +{ + public function reset(); +} diff --git a/vendor/monolog/monolog/src/Monolog/SignalHandler.php b/vendor/monolog/monolog/src/Monolog/SignalHandler.php new file mode 100644 index 00000000..1700740b --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/SignalHandler.php @@ -0,0 +1,115 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog; + +use Psr\Log\LoggerInterface; +use Psr\Log\LogLevel; +use ReflectionExtension; + +/** + * Monolog POSIX signal handler + * + * @author Robert Gust-Bardon + */ +class SignalHandler +{ + private $logger; + + private $previousSignalHandler = array(); + private $signalLevelMap = array(); + private $signalRestartSyscalls = array(); + + public function __construct(LoggerInterface $logger) + { + $this->logger = $logger; + } + + public function registerSignalHandler($signo, $level = LogLevel::CRITICAL, $callPrevious = true, $restartSyscalls = true, $async = true) + { + if (!extension_loaded('pcntl') || !function_exists('pcntl_signal')) { + return $this; + } + + if ($callPrevious) { + if (function_exists('pcntl_signal_get_handler')) { + $handler = pcntl_signal_get_handler($signo); + if ($handler === false) { + return $this; + } + $this->previousSignalHandler[$signo] = $handler; + } else { + $this->previousSignalHandler[$signo] = true; + } + } else { + unset($this->previousSignalHandler[$signo]); + } + $this->signalLevelMap[$signo] = $level; + $this->signalRestartSyscalls[$signo] = $restartSyscalls; + + if (function_exists('pcntl_async_signals') && $async !== null) { + pcntl_async_signals($async); + } + + pcntl_signal($signo, array($this, 'handleSignal'), $restartSyscalls); + + return $this; + } + + public function handleSignal($signo, array $siginfo = null) + { + static $signals = array(); + + if (!$signals && extension_loaded('pcntl')) { + $pcntl = new ReflectionExtension('pcntl'); + $constants = $pcntl->getConstants(); + if (!$constants) { + // HHVM 3.24.2 returns an empty array. + $constants = get_defined_constants(true); + $constants = $constants['Core']; + } + foreach ($constants as $name => $value) { + if (substr($name, 0, 3) === 'SIG' && $name[3] !== '_' && is_int($value)) { + $signals[$value] = $name; + } + } + unset($constants); + } + + $level = isset($this->signalLevelMap[$signo]) ? $this->signalLevelMap[$signo] : LogLevel::CRITICAL; + $signal = isset($signals[$signo]) ? $signals[$signo] : $signo; + $context = isset($siginfo) ? $siginfo : array(); + $this->logger->log($level, sprintf('Program received signal %s', $signal), $context); + + if (!isset($this->previousSignalHandler[$signo])) { + return; + } + + if ($this->previousSignalHandler[$signo] === true || $this->previousSignalHandler[$signo] === SIG_DFL) { + if (extension_loaded('pcntl') && function_exists('pcntl_signal') && function_exists('pcntl_sigprocmask') && function_exists('pcntl_signal_dispatch') + && extension_loaded('posix') && function_exists('posix_getpid') && function_exists('posix_kill')) { + $restartSyscalls = isset($this->signalRestartSyscalls[$signo]) ? $this->signalRestartSyscalls[$signo] : true; + pcntl_signal($signo, SIG_DFL, $restartSyscalls); + pcntl_sigprocmask(SIG_UNBLOCK, array($signo), $oldset); + posix_kill(posix_getpid(), $signo); + pcntl_signal_dispatch(); + pcntl_sigprocmask(SIG_SETMASK, $oldset); + pcntl_signal($signo, array($this, 'handleSignal'), $restartSyscalls); + } + } elseif (is_callable($this->previousSignalHandler[$signo])) { + if (PHP_VERSION_ID >= 70100) { + $this->previousSignalHandler[$signo]($signo, $siginfo); + } else { + $this->previousSignalHandler[$signo]($signo); + } + } + } +} diff --git a/vendor/monolog/monolog/src/Monolog/Utils.php b/vendor/monolog/monolog/src/Monolog/Utils.php new file mode 100644 index 00000000..f18d4a7d --- /dev/null +++ b/vendor/monolog/monolog/src/Monolog/Utils.php @@ -0,0 +1,159 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Monolog; + +class Utils +{ + /** + * @internal + */ + public static function getClass($object) + { + $class = \get_class($object); + + return 'c' === $class[0] && 0 === strpos($class, "class@anonymous\0") ? get_parent_class($class).'@anonymous' : $class; + } + + /** + * Return the JSON representation of a value + * + * @param mixed $data + * @param int $encodeFlags flags to pass to json encode, defaults to JSON_UNESCAPED_SLASHES | JSON_UNESCAPED_UNICODE + * @param bool $ignoreErrors whether to ignore encoding errors or to throw on error, when ignored and the encoding fails, "null" is returned which is valid json for null + * @throws \RuntimeException if encoding fails and errors are not ignored + * @return string + */ + public static function jsonEncode($data, $encodeFlags = null, $ignoreErrors = false) + { + if (null === $encodeFlags && version_compare(PHP_VERSION, '5.4.0', '>=')) { + $encodeFlags = JSON_UNESCAPED_SLASHES | JSON_UNESCAPED_UNICODE; + } + + if ($ignoreErrors) { + $json = @json_encode($data, $encodeFlags); + if (false === $json) { + return 'null'; + } + + return $json; + } + + $json = json_encode($data, $encodeFlags); + if (false === $json) { + $json = self::handleJsonError(json_last_error(), $data); + } + + return $json; + } + + /** + * Handle a json_encode failure. + * + * If the failure is due to invalid string encoding, try to clean the + * input and encode again. If the second encoding attempt fails, the + * inital error is not encoding related or the input can't be cleaned then + * raise a descriptive exception. + * + * @param int $code return code of json_last_error function + * @param mixed $data data that was meant to be encoded + * @param int $encodeFlags flags to pass to json encode, defaults to JSON_UNESCAPED_SLASHES | JSON_UNESCAPED_UNICODE + * @throws \RuntimeException if failure can't be corrected + * @return string JSON encoded data after error correction + */ + public static function handleJsonError($code, $data, $encodeFlags = null) + { + if ($code !== JSON_ERROR_UTF8) { + self::throwEncodeError($code, $data); + } + + if (is_string($data)) { + self::detectAndCleanUtf8($data); + } elseif (is_array($data)) { + array_walk_recursive($data, array('Monolog\Utils', 'detectAndCleanUtf8')); + } else { + self::throwEncodeError($code, $data); + } + + if (null === $encodeFlags && version_compare(PHP_VERSION, '5.4.0', '>=')) { + $encodeFlags = JSON_UNESCAPED_SLASHES | JSON_UNESCAPED_UNICODE; + } + + $json = json_encode($data, $encodeFlags); + + if ($json === false) { + self::throwEncodeError(json_last_error(), $data); + } + + return $json; + } + + /** + * Throws an exception according to a given code with a customized message + * + * @param int $code return code of json_last_error function + * @param mixed $data data that was meant to be encoded + * @throws \RuntimeException + */ + private static function throwEncodeError($code, $data) + { + switch ($code) { + case JSON_ERROR_DEPTH: + $msg = 'Maximum stack depth exceeded'; + break; + case JSON_ERROR_STATE_MISMATCH: + $msg = 'Underflow or the modes mismatch'; + break; + case JSON_ERROR_CTRL_CHAR: + $msg = 'Unexpected control character found'; + break; + case JSON_ERROR_UTF8: + $msg = 'Malformed UTF-8 characters, possibly incorrectly encoded'; + break; + default: + $msg = 'Unknown error'; + } + + throw new \RuntimeException('JSON encoding failed: '.$msg.'. Encoding: '.var_export($data, true)); + } + + /** + * Detect invalid UTF-8 string characters and convert to valid UTF-8. + * + * Valid UTF-8 input will be left unmodified, but strings containing + * invalid UTF-8 codepoints will be reencoded as UTF-8 with an assumed + * original encoding of ISO-8859-15. This conversion may result in + * incorrect output if the actual encoding was not ISO-8859-15, but it + * will be clean UTF-8 output and will not rely on expensive and fragile + * detection algorithms. + * + * Function converts the input in place in the passed variable so that it + * can be used as a callback for array_walk_recursive. + * + * @param mixed &$data Input to check and convert if needed + * @private + */ + public static function detectAndCleanUtf8(&$data) + { + if (is_string($data) && !preg_match('//u', $data)) { + $data = preg_replace_callback( + '/[\x80-\xFF]+/', + function ($m) { return utf8_encode($m[0]); }, + $data + ); + $data = str_replace( + array('¤', '¦', '¨', '´', '¸', '¼', '½', '¾'), + array('€', 'Š', 'š', 'Ž', 'ž', 'Œ', 'œ', 'Ÿ'), + $data + ); + } + } +} diff --git a/vendor/phpmailer/phpmailer/COMMITMENT b/vendor/phpmailer/phpmailer/COMMITMENT new file mode 100644 index 00000000..a687e0dd --- /dev/null +++ b/vendor/phpmailer/phpmailer/COMMITMENT @@ -0,0 +1,46 @@ +GPL Cooperation Commitment +Version 1.0 + +Before filing or continuing to prosecute any legal proceeding or claim +(other than a Defensive Action) arising from termination of a Covered +License, we commit to extend to the person or entity ('you') accused +of violating the Covered License the following provisions regarding +cure and reinstatement, taken from GPL version 3. As used here, the +term 'this License' refers to the specific Covered License being +enforced. + + However, if you cease all violation of this License, then your + license from a particular copyright holder is reinstated (a) + provisionally, unless and until the copyright holder explicitly + and finally terminates your license, and (b) permanently, if the + copyright holder fails to notify you of the violation by some + reasonable means prior to 60 days after the cessation. + + Moreover, your license from a particular copyright holder is + reinstated permanently if the copyright holder notifies you of the + violation by some reasonable means, this is the first time you + have received notice of violation of this License (for any work) + from that copyright holder, and you cure the violation prior to 30 + days after your receipt of the notice. + +We intend this Commitment to be irrevocable, and binding and +enforceable against us and assignees of or successors to our +copyrights. + +Definitions + +'Covered License' means the GNU General Public License, version 2 +(GPLv2), the GNU Lesser General Public License, version 2.1 +(LGPLv2.1), or the GNU Library General Public License, version 2 +(LGPLv2), all as published by the Free Software Foundation. + +'Defensive Action' means a legal proceeding or claim that We bring +against you in response to a prior proceeding or claim initiated by +you or your affiliate. + +'We' means each contributor to this repository as of the date of +inclusion of this file, including subsidiaries of a corporate +contributor. + +This work is available under a Creative Commons Attribution-ShareAlike +4.0 International license (https://creativecommons.org/licenses/by-sa/4.0/). diff --git a/vendor/phpmailer/phpmailer/LICENSE b/vendor/phpmailer/phpmailer/LICENSE new file mode 100644 index 00000000..f166cc57 --- /dev/null +++ b/vendor/phpmailer/phpmailer/LICENSE @@ -0,0 +1,502 @@ + GNU LESSER GENERAL PUBLIC LICENSE + Version 2.1, February 1999 + + Copyright (C) 1991, 1999 Free Software Foundation, Inc. + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + +[This is the first released version of the Lesser GPL. It also counts + as the successor of the GNU Library Public License, version 2, hence + the version number 2.1.] + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +Licenses are intended to guarantee your freedom to share and change +free software--to make sure the software is free for all its users. + + This license, the Lesser General Public License, applies to some +specially designated software packages--typically libraries--of the +Free Software Foundation and other authors who decide to use it. You +can use it too, but we suggest you first think carefully about whether +this license or the ordinary General Public License is the better +strategy to use in any particular case, based on the explanations below. + + When we speak of free software, we are referring to freedom of use, +not price. Our General Public Licenses are designed to make sure that +you have the freedom to distribute copies of free software (and charge +for this service if you wish); that you receive source code or can get +it if you want it; that you can change the software and use pieces of +it in new free programs; and that you are informed that you can do +these things. + + To protect your rights, we need to make restrictions that forbid +distributors to deny you these rights or to ask you to surrender these +rights. These restrictions translate to certain responsibilities for +you if you distribute copies of the library or if you modify it. + + For example, if you distribute copies of the library, whether gratis +or for a fee, you must give the recipients all the rights that we gave +you. You must make sure that they, too, receive or can get the source +code. If you link other code with the library, you must provide +complete object files to the recipients, so that they can relink them +with the library after making changes to the library and recompiling +it. And you must show them these terms so they know their rights. + + We protect your rights with a two-step method: (1) we copyright the +library, and (2) we offer you this license, which gives you legal +permission to copy, distribute and/or modify the library. + + To protect each distributor, we want to make it very clear that +there is no warranty for the free library. Also, if the library is +modified by someone else and passed on, the recipients should know +that what they have is not the original version, so that the original +author's reputation will not be affected by problems that might be +introduced by others. + + Finally, software patents pose a constant threat to the existence of +any free program. We wish to make sure that a company cannot +effectively restrict the users of a free program by obtaining a +restrictive license from a patent holder. Therefore, we insist that +any patent license obtained for a version of the library must be +consistent with the full freedom of use specified in this license. + + Most GNU software, including some libraries, is covered by the +ordinary GNU General Public License. This license, the GNU Lesser +General Public License, applies to certain designated libraries, and +is quite different from the ordinary General Public License. We use +this license for certain libraries in order to permit linking those +libraries into non-free programs. + + When a program is linked with a library, whether statically or using +a shared library, the combination of the two is legally speaking a +combined work, a derivative of the original library. The ordinary +General Public License therefore permits such linking only if the +entire combination fits its criteria of freedom. The Lesser General +Public License permits more lax criteria for linking other code with +the library. + + We call this license the "Lesser" General Public License because it +does Less to protect the user's freedom than the ordinary General +Public License. It also provides other free software developers Less +of an advantage over competing non-free programs. These disadvantages +are the reason we use the ordinary General Public License for many +libraries. However, the Lesser license provides advantages in certain +special circumstances. + + For example, on rare occasions, there may be a special need to +encourage the widest possible use of a certain library, so that it becomes +a de-facto standard. To achieve this, non-free programs must be +allowed to use the library. A more frequent case is that a free +library does the same job as widely used non-free libraries. In this +case, there is little to gain by limiting the free library to free +software only, so we use the Lesser General Public License. + + In other cases, permission to use a particular library in non-free +programs enables a greater number of people to use a large body of +free software. For example, permission to use the GNU C Library in +non-free programs enables many more people to use the whole GNU +operating system, as well as its variant, the GNU/Linux operating +system. + + Although the Lesser General Public License is Less protective of the +users' freedom, it does ensure that the user of a program that is +linked with the Library has the freedom and the wherewithal to run +that program using a modified version of the Library. + + The precise terms and conditions for copying, distribution and +modification follow. Pay close attention to the difference between a +"work based on the library" and a "work that uses the library". The +former contains code derived from the library, whereas the latter must +be combined with the library in order to run. + + GNU LESSER GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License Agreement applies to any software library or other +program which contains a notice placed by the copyright holder or +other authorized party saying it may be distributed under the terms of +this Lesser General Public License (also called "this License"). +Each licensee is addressed as "you". + + A "library" means a collection of software functions and/or data +prepared so as to be conveniently linked with application programs +(which use some of those functions and data) to form executables. + + The "Library", below, refers to any such software library or work +which has been distributed under these terms. A "work based on the +Library" means either the Library or any derivative work under +copyright law: that is to say, a work containing the Library or a +portion of it, either verbatim or with modifications and/or translated +straightforwardly into another language. (Hereinafter, translation is +included without limitation in the term "modification".) + + "Source code" for a work means the preferred form of the work for +making modifications to it. For a library, complete source code means +all the source code for all modules it contains, plus any associated +interface definition files, plus the scripts used to control compilation +and installation of the library. + + Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running a program using the Library is not restricted, and output from +such a program is covered only if its contents constitute a work based +on the Library (independent of the use of the Library in a tool for +writing it). Whether that is true depends on what the Library does +and what the program that uses the Library does. + + 1. You may copy and distribute verbatim copies of the Library's +complete source code as you receive it, in any medium, provided that +you conspicuously and appropriately publish on each copy an +appropriate copyright notice and disclaimer of warranty; keep intact +all the notices that refer to this License and to the absence of any +warranty; and distribute a copy of this License along with the +Library. + + You may charge a fee for the physical act of transferring a copy, +and you may at your option offer warranty protection in exchange for a +fee. + + 2. You may modify your copy or copies of the Library or any portion +of it, thus forming a work based on the Library, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) The modified work must itself be a software library. + + b) You must cause the files modified to carry prominent notices + stating that you changed the files and the date of any change. + + c) You must cause the whole of the work to be licensed at no + charge to all third parties under the terms of this License. + + d) If a facility in the modified Library refers to a function or a + table of data to be supplied by an application program that uses + the facility, other than as an argument passed when the facility + is invoked, then you must make a good faith effort to ensure that, + in the event an application does not supply such function or + table, the facility still operates, and performs whatever part of + its purpose remains meaningful. + + (For example, a function in a library to compute square roots has + a purpose that is entirely well-defined independent of the + application. Therefore, Subsection 2d requires that any + application-supplied function or table used by this function must + be optional: if the application does not supply it, the square + root function must still compute square roots.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Library, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Library, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote +it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Library. + +In addition, mere aggregation of another work not based on the Library +with the Library (or with a work based on the Library) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may opt to apply the terms of the ordinary GNU General Public +License instead of this License to a given copy of the Library. To do +this, you must alter all the notices that refer to this License, so +that they refer to the ordinary GNU General Public License, version 2, +instead of to this License. (If a newer version than version 2 of the +ordinary GNU General Public License has appeared, then you can specify +that version instead if you wish.) Do not make any other change in +these notices. + + Once this change is made in a given copy, it is irreversible for +that copy, so the ordinary GNU General Public License applies to all +subsequent copies and derivative works made from that copy. + + This option is useful when you wish to copy part of the code of +the Library into a program that is not a library. + + 4. You may copy and distribute the Library (or a portion or +derivative of it, under Section 2) in object code or executable form +under the terms of Sections 1 and 2 above provided that you accompany +it with the complete corresponding machine-readable source code, which +must be distributed under the terms of Sections 1 and 2 above on a +medium customarily used for software interchange. + + If distribution of object code is made by offering access to copy +from a designated place, then offering equivalent access to copy the +source code from the same place satisfies the requirement to +distribute the source code, even though third parties are not +compelled to copy the source along with the object code. + + 5. A program that contains no derivative of any portion of the +Library, but is designed to work with the Library by being compiled or +linked with it, is called a "work that uses the Library". Such a +work, in isolation, is not a derivative work of the Library, and +therefore falls outside the scope of this License. + + However, linking a "work that uses the Library" with the Library +creates an executable that is a derivative of the Library (because it +contains portions of the Library), rather than a "work that uses the +library". The executable is therefore covered by this License. +Section 6 states terms for distribution of such executables. + + When a "work that uses the Library" uses material from a header file +that is part of the Library, the object code for the work may be a +derivative work of the Library even though the source code is not. +Whether this is true is especially significant if the work can be +linked without the Library, or if the work is itself a library. The +threshold for this to be true is not precisely defined by law. + + If such an object file uses only numerical parameters, data +structure layouts and accessors, and small macros and small inline +functions (ten lines or less in length), then the use of the object +file is unrestricted, regardless of whether it is legally a derivative +work. (Executables containing this object code plus portions of the +Library will still fall under Section 6.) + + Otherwise, if the work is a derivative of the Library, you may +distribute the object code for the work under the terms of Section 6. +Any executables containing that work also fall under Section 6, +whether or not they are linked directly with the Library itself. + + 6. As an exception to the Sections above, you may also combine or +link a "work that uses the Library" with the Library to produce a +work containing portions of the Library, and distribute that work +under terms of your choice, provided that the terms permit +modification of the work for the customer's own use and reverse +engineering for debugging such modifications. + + You must give prominent notice with each copy of the work that the +Library is used in it and that the Library and its use are covered by +this License. You must supply a copy of this License. If the work +during execution displays copyright notices, you must include the +copyright notice for the Library among them, as well as a reference +directing the user to the copy of this License. Also, you must do one +of these things: + + a) Accompany the work with the complete corresponding + machine-readable source code for the Library including whatever + changes were used in the work (which must be distributed under + Sections 1 and 2 above); and, if the work is an executable linked + with the Library, with the complete machine-readable "work that + uses the Library", as object code and/or source code, so that the + user can modify the Library and then relink to produce a modified + executable containing the modified Library. (It is understood + that the user who changes the contents of definitions files in the + Library will not necessarily be able to recompile the application + to use the modified definitions.) + + b) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (1) uses at run time a + copy of the library already present on the user's computer system, + rather than copying library functions into the executable, and (2) + will operate properly with a modified version of the library, if + the user installs one, as long as the modified version is + interface-compatible with the version that the work was made with. + + c) Accompany the work with a written offer, valid for at + least three years, to give the same user the materials + specified in Subsection 6a, above, for a charge no more + than the cost of performing this distribution. + + d) If distribution of the work is made by offering access to copy + from a designated place, offer equivalent access to copy the above + specified materials from the same place. + + e) Verify that the user has already received a copy of these + materials or that you have already sent this user a copy. + + For an executable, the required form of the "work that uses the +Library" must include any data and utility programs needed for +reproducing the executable from it. However, as a special exception, +the materials to be distributed need not include anything that is +normally distributed (in either source or binary form) with the major +components (compiler, kernel, and so on) of the operating system on +which the executable runs, unless that component itself accompanies +the executable. + + It may happen that this requirement contradicts the license +restrictions of other proprietary libraries that do not normally +accompany the operating system. Such a contradiction means you cannot +use both them and the Library together in an executable that you +distribute. + + 7. You may place library facilities that are a work based on the +Library side-by-side in a single library together with other library +facilities not covered by this License, and distribute such a combined +library, provided that the separate distribution of the work based on +the Library and of the other library facilities is otherwise +permitted, and provided that you do these two things: + + a) Accompany the combined library with a copy of the same work + based on the Library, uncombined with any other library + facilities. This must be distributed under the terms of the + Sections above. + + b) Give prominent notice with the combined library of the fact + that part of it is a work based on the Library, and explaining + where to find the accompanying uncombined form of the same work. + + 8. You may not copy, modify, sublicense, link with, or distribute +the Library except as expressly provided under this License. Any +attempt otherwise to copy, modify, sublicense, link with, or +distribute the Library is void, and will automatically terminate your +rights under this License. However, parties who have received copies, +or rights, from you under this License will not have their licenses +terminated so long as such parties remain in full compliance. + + 9. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Library or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Library (or any work based on the +Library), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Library or works based on it. + + 10. Each time you redistribute the Library (or any work based on the +Library), the recipient automatically receives a license from the +original licensor to copy, distribute, link with or modify the Library +subject to these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties with +this License. + + 11. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Library at all. For example, if a patent +license would not permit royalty-free redistribution of the Library by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Library. + +If any portion of this section is held invalid or unenforceable under any +particular circumstance, the balance of the section is intended to apply, +and the section as a whole is intended to apply in other circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 12. If the distribution and/or use of the Library is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Library under this License may add +an explicit geographical distribution limitation excluding those countries, +so that distribution is permitted only in or among countries not thus +excluded. In such case, this License incorporates the limitation as if +written in the body of this License. + + 13. The Free Software Foundation may publish revised and/or new +versions of the Lesser General Public License from time to time. +Such new versions will be similar in spirit to the present version, +but may differ in detail to address new problems or concerns. + +Each version is given a distinguishing version number. If the Library +specifies a version number of this License which applies to it and +"any later version", you have the option of following the terms and +conditions either of that version or of any later version published by +the Free Software Foundation. If the Library does not specify a +license version number, you may choose any version ever published by +the Free Software Foundation. + + 14. If you wish to incorporate parts of the Library into other free +programs whose distribution conditions are incompatible with these, +write to the author to ask for permission. For software which is +copyrighted by the Free Software Foundation, write to the Free +Software Foundation; we sometimes make exceptions for this. Our +decision will be guided by the two goals of preserving the free status +of all derivatives of our free software and of promoting the sharing +and reuse of software generally. + + NO WARRANTY + + 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO +WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. +EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR +OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY +KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE +LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME +THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN +WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY +AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU +FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR +CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE +LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING +RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A +FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF +SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH +DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Libraries + + If you develop a new library, and you want it to be of the greatest +possible use to the public, we recommend making it free software that +everyone can redistribute and change. You can do so by permitting +redistribution under these terms (or, alternatively, under the terms of the +ordinary General Public License). + + To apply these terms, attach the following notices to the library. It is +safest to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least the +"copyright" line and a pointer to where the full notice is found. + + + Copyright (C) + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + +Also add information on how to contact you by electronic and paper mail. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the library, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the + library `Frob' (a library for tweaking knobs) written by James Random Hacker. + + , 1 April 1990 + Ty Coon, President of Vice + +That's all there is to it! \ No newline at end of file diff --git a/vendor/phpmailer/phpmailer/README.md b/vendor/phpmailer/phpmailer/README.md new file mode 100644 index 00000000..d8a0f4e3 --- /dev/null +++ b/vendor/phpmailer/phpmailer/README.md @@ -0,0 +1,221 @@ +![PHPMailer](https://raw.github.com/PHPMailer/PHPMailer/master/examples/images/phpmailer.png) + +# PHPMailer - A full-featured email creation and transfer class for PHP + +Build status: [![Build Status](https://travis-ci.org/PHPMailer/PHPMailer.svg)](https://travis-ci.org/PHPMailer/PHPMailer) +[![Scrutinizer Quality Score](https://scrutinizer-ci.com/g/PHPMailer/PHPMailer/badges/quality-score.png?s=3758e21d279becdf847a557a56a3ed16dfec9d5d)](https://scrutinizer-ci.com/g/PHPMailer/PHPMailer/) +[![Code Coverage](https://scrutinizer-ci.com/g/PHPMailer/PHPMailer/badges/coverage.png?s=3fe6ca5fe8cd2cdf96285756e42932f7ca256962)](https://scrutinizer-ci.com/g/PHPMailer/PHPMailer/) + +[![Latest Stable Version](https://poser.pugx.org/phpmailer/phpmailer/v/stable.svg)](https://packagist.org/packages/phpmailer/phpmailer) [![Total Downloads](https://poser.pugx.org/phpmailer/phpmailer/downloads)](https://packagist.org/packages/phpmailer/phpmailer) [![Latest Unstable Version](https://poser.pugx.org/phpmailer/phpmailer/v/unstable.svg)](https://packagist.org/packages/phpmailer/phpmailer) [![License](https://poser.pugx.org/phpmailer/phpmailer/license.svg)](https://packagist.org/packages/phpmailer/phpmailer) [![API Docs](https://github.com/phpmailer/phpmailer/workflows/Docs/badge.svg)](http://phpmailer.github.io/PHPMailer/) + +## Class Features +- Probably the world's most popular code for sending email from PHP! +- Used by many open-source projects: WordPress, Drupal, 1CRM, SugarCRM, Yii, Joomla! and many more +- Integrated SMTP support - send without a local mail server +- Send emails with multiple To, CC, BCC and Reply-to addresses +- Multipart/alternative emails for mail clients that do not read HTML email +- Add attachments, including inline +- Support for UTF-8 content and 8bit, base64, binary, and quoted-printable encodings +- SMTP authentication with LOGIN, PLAIN, CRAM-MD5, and XOAUTH2 mechanisms over SSL and SMTP+STARTTLS transports +- Validates email addresses automatically +- Protect against header injection attacks +- Error messages in over 50 languages! +- DKIM and S/MIME signing support +- Compatible with PHP 5.5 and later +- Namespaced to prevent name clashes +- Much more! + +## Why you might need it +Many PHP developers need to send email from their code. The only PHP function that supports this is [`mail()`](https://www.php.net/manual/en/function.mail.php). However, it does not provide any assistance for making use of popular features such as encryption, authentication, HTML messages, and attachments. + +Formatting email correctly is surprisingly difficult. There are myriad overlapping RFCs, requiring tight adherence to horribly complicated formatting and encoding rules – the vast majority of code that you'll find online that uses the `mail()` function directly is just plain wrong! +*Please* don't be tempted to do it yourself – if you don't use PHPMailer, there are many other excellent libraries that you should look at before rolling your own. Try [SwiftMailer](https://swiftmailer.symfony.com/), [Zend/Mail](https://zendframework.github.io/zend-mail/), [ZetaComponents](https://github.com/zetacomponents/Mail) etc. + +The PHP `mail()` function usually sends via a local mail server, typically fronted by a `sendmail` binary on Linux, BSD, and macOS platforms, however, Windows usually doesn't include a local mail server; PHPMailer's integrated SMTP implementation allows email sending on Windows platforms without a local mail server. + +## License +This software is distributed under the [LGPL 2.1](http://www.gnu.org/licenses/lgpl-2.1.html) license, along with the [GPL Cooperation Commitment](https://gplcc.github.io/gplcc/). Please read LICENSE for information on the software availability and distribution. + +## Installation & loading +PHPMailer is available on [Packagist](https://packagist.org/packages/phpmailer/phpmailer) (using semantic versioning), and installation via [Composer](https://getcomposer.org) is the recommended way to install PHPMailer. Just add this line to your `composer.json` file: + +```json +"phpmailer/phpmailer": "~6.1" +``` + +or run + +```sh +composer require phpmailer/phpmailer +``` + +Note that the `vendor` folder and the `vendor/autoload.php` script are generated by Composer; they are not part of PHPMailer. + +If you want to use the Gmail XOAUTH2 authentication class, you will also need to add a dependency on the `league/oauth2-client` package in your `composer.json`. + +Alternatively, if you're not using Composer, copy the contents of the PHPMailer folder into one of the `include_path` directories specified in your PHP configuration and load each class file manually: + +```php +SMTPDebug = SMTP::DEBUG_SERVER; // Enable verbose debug output + $mail->isSMTP(); // Send using SMTP + $mail->Host = 'smtp1.example.com'; // Set the SMTP server to send through + $mail->SMTPAuth = true; // Enable SMTP authentication + $mail->Username = 'user@example.com'; // SMTP username + $mail->Password = 'secret'; // SMTP password + $mail->SMTPSecure = PHPMailer::ENCRYPTION_STARTTLS; // Enable TLS encryption; `PHPMailer::ENCRYPTION_SMTPS` also accepted + $mail->Port = 587; // TCP port to connect to + + //Recipients + $mail->setFrom('from@example.com', 'Mailer'); + $mail->addAddress('joe@example.net', 'Joe User'); // Add a recipient + $mail->addAddress('ellen@example.com'); // Name is optional + $mail->addReplyTo('info@example.com', 'Information'); + $mail->addCC('cc@example.com'); + $mail->addBCC('bcc@example.com'); + + // Attachments + $mail->addAttachment('/var/tmp/file.tar.gz'); // Add attachments + $mail->addAttachment('/tmp/image.jpg', 'new.jpg'); // Optional name + + // Content + $mail->isHTML(true); // Set email format to HTML + $mail->Subject = 'Here is the subject'; + $mail->Body = 'This is the HTML message body in bold!'; + $mail->AltBody = 'This is the body in plain text for non-HTML mail clients'; + + $mail->send(); + echo 'Message has been sent'; +} catch (Exception $e) { + echo "Message could not be sent. Mailer Error: {$mail->ErrorInfo}"; +} +``` + +You'll find plenty more to play with in the [examples](https://github.com/PHPMailer/PHPMailer/tree/master/examples) folder. + +If you are re-using the instance (e.g. when sending to a mailing list), you may need to clear the recipient list to avoid sending duplicate messages. See [the mailing list example](https://github.com/PHPMailer/PHPMailer/blob/master/examples/mailing_list.phps) for further guidance. + +That's it. You should now be ready to use PHPMailer! + +## Localization +PHPMailer defaults to English, but in the [language](https://github.com/PHPMailer/PHPMailer/tree/master/language/) folder you'll find many translations for PHPMailer error messages that you may encounter. Their filenames contain [ISO 639-1](http://en.wikipedia.org/wiki/ISO_639-1) language code for the translations, for example `fr` for French. To specify a language, you need to tell PHPMailer which one to use, like this: + +```php +// To load the French version +$mail->setLanguage('fr', '/optional/path/to/language/directory/'); +``` + +We welcome corrections and new languages - if you're looking for corrections to do, run the [PHPMailerLangTest.php](https://github.com/PHPMailer/PHPMailer/tree/master/test/PHPMailerLangTest.php) script in the tests folder and it will show any missing translations. + +## Documentation +Start reading at the [GitHub wiki](https://github.com/PHPMailer/PHPMailer/wiki). If you're having trouble, this should be the first place you look as it's the most frequently updated. + +Examples of how to use PHPMailer for common scenarios can be found in the [examples](https://github.com/PHPMailer/PHPMailer/tree/master/examples) folder. If you're looking for a good starting point, we recommend you start with [the Gmail example](https://github.com/PHPMailer/PHPMailer/tree/master/examples/gmail.phps). + +Note that in order to reduce PHPMailer's deployed code footprint, the examples are no longer included if you load PHPMailer via Composer or via [GitHub's zip file download](https://github.com/PHPMailer/PHPMailer/archive/master.zip), so you'll need to either clone the git repository or use the above links to get to the examples directly. + +Complete generated API documentation is [available online](http://phpmailer.github.io/PHPMailer/). + +You can generate complete API-level documentation by running `phpdoc` in the top-level folder, and documentation will appear in the `docs` folder, though you'll need to have [PHPDocumentor](http://www.phpdoc.org) installed. You may find [the unit tests](https://github.com/PHPMailer/PHPMailer/tree/master/test/phpmailerTest.php) a good source of how to do various operations such as encryption. + +If the documentation doesn't cover what you need, search the [many questions on Stack Overflow](http://stackoverflow.com/questions/tagged/phpmailer), and before you ask a question about "SMTP Error: Could not connect to SMTP host.", [read the troubleshooting guide](https://github.com/PHPMailer/PHPMailer/wiki/Troubleshooting). + +## Tests +There is a PHPUnit test script in the [test](https://github.com/PHPMailer/PHPMailer/tree/master/test/) folder. PHPMailer uses PHPUnit 4.8 - we would use 5.x but we need to run on PHP 5.5. + +Build status: [![Build Status](https://travis-ci.org/PHPMailer/PHPMailer.svg)](https://travis-ci.org/PHPMailer/PHPMailer) + +If this isn't passing, is there something you can do to help? + +## Security +Please disclose any vulnerabilities found responsibly - report any security problems found to the maintainers privately. + +PHPMailer versions prior to 5.2.22 (released January 9th 2017) have a local file disclosure vulnerability, [CVE-2017-5223](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2017-5223). If content passed into `msgHTML()` is sourced from unfiltered user input, relative paths can map to absolute local file paths and added as attachments. Also note that `addAttachment` (just like `file_get_contents`, `passthru`, `unlink`, etc) should not be passed user-sourced params either! Reported by Yongxiang Li of Asiasecurity. + +PHPMailer versions prior to 5.2.20 (released December 28th 2016) are vulnerable to [CVE-2016-10045](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2016-10045) a remote code execution vulnerability, responsibly reported by [Dawid Golunski](https://legalhackers.com/advisories/PHPMailer-Exploit-Remote-Code-Exec-CVE-2016-10045-Vuln-Patch-Bypass.html), and patched by Paul Buonopane (@Zenexer). + +PHPMailer versions prior to 5.2.18 (released December 2016) are vulnerable to [CVE-2016-10033](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2016-10033) a critical remote code execution vulnerability, responsibly reported by [Dawid Golunski](http://legalhackers.com/advisories/PHPMailer-Exploit-Remote-Code-Exec-CVE-2016-10033-Vuln.html). + +See [SECURITY](https://github.com/PHPMailer/PHPMailer/tree/master/SECURITY.md) for more detail on security issues. + +## Contributing +Please submit bug reports, suggestions and pull requests to the [GitHub issue tracker](https://github.com/PHPMailer/PHPMailer/issues). + +We're particularly interested in fixing edge-cases, expanding test coverage and updating translations. + +If you found a mistake in the docs, or want to add something, go ahead and amend the wiki - anyone can edit it. + +If you have git clones from prior to the move to the PHPMailer GitHub organisation, you'll need to update any remote URLs referencing the old GitHub location with a command like this from within your clone: + +```sh +git remote set-url upstream https://github.com/PHPMailer/PHPMailer.git +``` + +Please *don't* use the SourceForge or Google Code projects any more; they are obsolete and no longer maintained. + +## Sponsorship +Development time and resources for PHPMailer are provided by [Smartmessages.net](https://info.smartmessages.net/), a powerful email marketing system. + +Smartmessages email marketing + +Other contributions are gladly received, whether in beer 🍺, T-shirts 👕, Amazon wishlist raids, or cold, hard cash 💰. If you'd like to donate to say "thank you" to maintainers or contributors, please contact them through individual profile pages via [the contributors page](https://github.com/PHPMailer/PHPMailer/graphs/contributors). + +## Changelog +See [changelog](changelog.md). + +## History +- PHPMailer was originally written in 2001 by Brent R. Matzelle as a [SourceForge project](http://sourceforge.net/projects/phpmailer/). +- Marcus Bointon (coolbru on SF) and Andy Prevost (codeworxtech) took over the project in 2004. +- Became an Apache incubator project on Google Code in 2010, managed by Jim Jagielski. +- Marcus created his fork on [GitHub](https://github.com/Synchro/PHPMailer) in 2008. +- Jim and Marcus decide to join forces and use GitHub as the canonical and official repo for PHPMailer in 2013. +- PHPMailer moves to the [PHPMailer organisation](https://github.com/PHPMailer) on GitHub in 2013. + +### What's changed since moving from SourceForge? +- Official successor to the SourceForge and Google Code projects. +- Test suite. +- Continuous integration with Travis-CI. +- Composer support. +- Public development. +- Additional languages and language strings. +- CRAM-MD5 authentication support. +- Preserves full repo history of authors, commits and branches from the original SourceForge project. diff --git a/vendor/phpmailer/phpmailer/SECURITY.md b/vendor/phpmailer/phpmailer/SECURITY.md new file mode 100644 index 00000000..5e917cd0 --- /dev/null +++ b/vendor/phpmailer/phpmailer/SECURITY.md @@ -0,0 +1,28 @@ +# Security notices relating to PHPMailer + +Please disclose any vulnerabilities found responsibly - report any security problems found to the maintainers privately. + +PHPMailer versions prior to 6.0.6 and 5.2.27 are vulnerable to an object injection attack by passing `phar://` paths into `addAttachment()` and other functions that may receive unfiltered local paths, possibly leading to RCE. Recorded as [CVE-2018-19296](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2018-19296). See [this article](https://knasmueller.net/5-answers-about-php-phar-exploitation) for more info on this type of vulnerability. Mitigated by blocking the use of paths containing URL-protocol style prefixes such as `phar://`. Reported by Sehun Oh of cyberone.kr. + +PHPMailer versions prior to 5.2.24 (released July 26th 2017) have an XSS vulnerability in one of the code examples, [CVE-2017-11503](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2017-11503). The `code_generator.phps` example did not filter user input prior to output. This file is distributed with a `.phps` extension, so it it not normally executable unless it is explicitly renamed, and the file is not included when PHPMailer is loaded through composer, so it is safe by default. There was also an undisclosed potential XSS vulnerability in the default exception handler (unused by default). Patches for both issues kindly provided by Patrick Monnerat of the Fedora Project. + +PHPMailer versions prior to 5.2.22 (released January 9th 2017) have a local file disclosure vulnerability, [CVE-2017-5223](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2017-5223). If content passed into `msgHTML()` is sourced from unfiltered user input, relative paths can map to absolute local file paths and added as attachments. Also note that `addAttachment` (just like `file_get_contents`, `passthru`, `unlink`, etc) should not be passed user-sourced params either! Reported by Yongxiang Li of Asiasecurity. + +PHPMailer versions prior to 5.2.20 (released December 28th 2016) are vulnerable to [CVE-2016-10045](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2016-10045) a remote code execution vulnerability, responsibly reported by [Dawid Golunski](https://legalhackers.com/advisories/PHPMailer-Exploit-Remote-Code-Exec-CVE-2016-10045-Vuln-Patch-Bypass.html), and patched by Paul Buonopane (@Zenexer). + +PHPMailer versions prior to 5.2.18 (released December 2016) are vulnerable to [CVE-2016-10033](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2016-10033) a remote code execution vulnerability, responsibly reported by [Dawid Golunski](http://legalhackers.com/advisories/PHPMailer-Exploit-Remote-Code-Exec-CVE-2016-10033-Vuln.html). + +PHPMailer versions prior to 5.2.14 (released November 2015) are vulnerable to [CVE-2015-8476](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2015-8476) an SMTP CRLF injection bug permitting arbitrary message sending. + +PHPMailer versions prior to 5.2.10 (released May 2015) are vulnerable to [CVE-2008-5619](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2008-5619), a remote code execution vulnerability in the bundled html2text library. This file was removed in 5.2.10, so if you are using a version prior to that and make use of the html2text function, it's vitally important that you upgrade and remove this file. + +PHPMailer versions prior to 2.0.7 and 2.2.1 are vulnerable to [CVE-2012-0796](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2012-0796), an email header injection attack. + +Joomla 1.6.0 uses PHPMailer in an unsafe way, allowing it to reveal local file paths, reported in [CVE-2011-3747](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2011-3747). + +PHPMailer didn't sanitise the `$lang_path` parameter in `SetLanguage`. This wasn't a problem in itself, but some apps (PHPClassifieds, ATutor) also failed to sanitise user-provided parameters passed to it, permitting semi-arbitrary local file inclusion, reported in [CVE-2010-4914](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2010-4914), [CVE-2007-2021](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2007-2021) and [CVE-2006-5734](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2006-5734). + +PHPMailer 1.7.2 and earlier contained a possible DDoS vulnerability reported in [CVE-2005-1807](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2005-1807). + +PHPMailer 1.7 and earlier (June 2003) have a possible vulnerability in the `SendmailSend` method where shell commands may not be sanitised. Reported in [CVE-2007-3215](https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2007-3215). + diff --git a/vendor/phpmailer/phpmailer/VERSION b/vendor/phpmailer/phpmailer/VERSION new file mode 100644 index 00000000..1879c1be --- /dev/null +++ b/vendor/phpmailer/phpmailer/VERSION @@ -0,0 +1 @@ +6.1.4 \ No newline at end of file diff --git a/vendor/phpmailer/phpmailer/composer.json b/vendor/phpmailer/phpmailer/composer.json new file mode 100644 index 00000000..fd0695c8 --- /dev/null +++ b/vendor/phpmailer/phpmailer/composer.json @@ -0,0 +1,51 @@ +{ + "name": "phpmailer/phpmailer", + "type": "library", + "description": "PHPMailer is a full-featured email creation and transfer class for PHP", + "authors": [ + { + "name": "Marcus Bointon", + "email": "phpmailer@synchromedia.co.uk" + }, + { + "name": "Jim Jagielski", + "email": "jimjag@gmail.com" + }, + { + "name": "Andy Prevost", + "email": "codeworxtech@users.sourceforge.net" + }, + { + "name": "Brent R. Matzelle" + } + ], + "require": { + "php": ">=5.5.0", + "ext-ctype": "*", + "ext-filter": "*" + }, + "require-dev": { + "friendsofphp/php-cs-fixer": "^2.2", + "phpunit/phpunit": "^4.8 || ^5.7", + "doctrine/annotations": "^1.2" + }, + "suggest": { + "psr/log": "For optional PSR-3 debug logging", + "league/oauth2-google": "Needed for Google XOAUTH2 authentication", + "hayageek/oauth2-yahoo": "Needed for Yahoo XOAUTH2 authentication", + "stevenmaguire/oauth2-microsoft": "Needed for Microsoft XOAUTH2 authentication", + "ext-mbstring": "Needed to send email in multibyte encoding charset", + "symfony/polyfill-mbstring": "To support UTF-8 if the Mbstring PHP extension is not enabled (^1.2)" + }, + "autoload": { + "psr-4": { + "PHPMailer\\PHPMailer\\": "src/" + } + }, + "autoload-dev": { + "psr-4": { + "PHPMailer\\Test\\": "test/" + } + }, + "license": "LGPL-2.1-only" +} diff --git a/vendor/phpmailer/phpmailer/get_oauth_token.php b/vendor/phpmailer/phpmailer/get_oauth_token.php new file mode 100644 index 00000000..1237b57b --- /dev/null +++ b/vendor/phpmailer/phpmailer/get_oauth_token.php @@ -0,0 +1,144 @@ + + * @author Jim Jagielski (jimjag) + * @author Andy Prevost (codeworxtech) + * @author Brent R. Matzelle (original founder) + * @copyright 2012 - 2017 Marcus Bointon + * @copyright 2010 - 2012 Jim Jagielski + * @copyright 2004 - 2009 Andy Prevost + * @license http://www.gnu.org/copyleft/lesser.html GNU Lesser General Public License + * @note This program is distributed in the hope that it will be useful - WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. + */ +/** + * Get an OAuth2 token from an OAuth2 provider. + * * Install this script on your server so that it's accessible + * as [https/http]:////get_oauth_token.php + * e.g.: http://localhost/phpmailer/get_oauth_token.php + * * Ensure dependencies are installed with 'composer install' + * * Set up an app in your Google/Yahoo/Microsoft account + * * Set the script address as the app's redirect URL + * If no refresh token is obtained when running this file, + * revoke access to your app and run the script again. + */ + +namespace PHPMailer\PHPMailer; + +/** + * Aliases for League Provider Classes + * Make sure you have added these to your composer.json and run `composer install` + * Plenty to choose from here: + * @see http://oauth2-client.thephpleague.com/providers/thirdparty/ + */ +// @see https://github.com/thephpleague/oauth2-google +use League\OAuth2\Client\Provider\Google; +// @see https://packagist.org/packages/hayageek/oauth2-yahoo +use Hayageek\OAuth2\Client\Provider\Yahoo; +// @see https://github.com/stevenmaguire/oauth2-microsoft +use Stevenmaguire\OAuth2\Client\Provider\Microsoft; + +if (!isset($_GET['code']) && !isset($_GET['provider'])) { +?> + +Select Provider:
+Google
+Yahoo
+Microsoft/Outlook/Hotmail/Live/Office365
+ + + $clientId, + 'clientSecret' => $clientSecret, + 'redirectUri' => $redirectUri, + 'accessType' => 'offline' +]; + +$options = []; +$provider = null; + +switch ($providerName) { + case 'Google': + $provider = new Google($params); + $options = [ + 'scope' => [ + 'https://mail.google.com/' + ] + ]; + break; + case 'Yahoo': + $provider = new Yahoo($params); + break; + case 'Microsoft': + $provider = new Microsoft($params); + $options = [ + 'scope' => [ + 'wl.imap', + 'wl.offline_access' + ] + ]; + break; +} + +if (null === $provider) { + exit('Provider missing'); +} + +if (!isset($_GET['code'])) { + // If we don't have an authorization code then get one + $authUrl = $provider->getAuthorizationUrl($options); + $_SESSION['oauth2state'] = $provider->getState(); + header('Location: ' . $authUrl); + exit; +// Check given state against previously stored one to mitigate CSRF attack +} elseif (empty($_GET['state']) || ($_GET['state'] !== $_SESSION['oauth2state'])) { + unset($_SESSION['oauth2state']); + unset($_SESSION['provider']); + exit('Invalid state'); +} else { + unset($_SESSION['provider']); + // Try to get an access token (using the authorization code grant) + $token = $provider->getAccessToken( + 'authorization_code', + [ + 'code' => $_GET['code'] + ] + ); + // Use this to interact with an API on the users behalf + // Use this to get a new access token if the old one expires + echo 'Refresh Token: ', $token->getRefreshToken(); +} diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-af.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-af.php new file mode 100644 index 00000000..3c42d78e --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-af.php @@ -0,0 +1,25 @@ + + */ + +$PHPMAILER_LANG['authenticate'] = 'SMTP -ի սխալ: չհաջողվեց ստուգել իսկությունը.'; +$PHPMAILER_LANG['connect_host'] = 'SMTP -ի սխալ: չհաջողվեց կապ հաստատել SMTP սերվերի հետ.'; +$PHPMAILER_LANG['data_not_accepted'] = 'SMTP -ի սխալ: տվյալները ընդունված չեն.'; +$PHPMAILER_LANG['empty_message'] = 'Հաղորդագրությունը դատարկ է'; +$PHPMAILER_LANG['encoding'] = 'Կոդավորման անհայտ տեսակ: '; +$PHPMAILER_LANG['execute'] = 'Չհաջողվեց իրականացնել հրամանը: '; +$PHPMAILER_LANG['file_access'] = 'Ֆայլը հասանելի չէ: '; +$PHPMAILER_LANG['file_open'] = 'Ֆայլի սխալ: ֆայլը չհաջողվեց բացել: '; +$PHPMAILER_LANG['from_failed'] = 'Ուղարկողի հետևյալ հասցեն սխալ է: '; +$PHPMAILER_LANG['instantiate'] = 'Հնարավոր չէ կանչել mail ֆունկցիան.'; +$PHPMAILER_LANG['invalid_address'] = 'Հասցեն սխալ է: '; +$PHPMAILER_LANG['mailer_not_supported'] = ' փոստային սերվերի հետ չի աշխատում.'; +$PHPMAILER_LANG['provide_address'] = 'Անհրաժեշտ է տրամադրել գոնե մեկ ստացողի e-mail հասցե.'; +$PHPMAILER_LANG['recipients_failed'] = 'SMTP -ի սխալ: չի հաջողվել ուղարկել հետևյալ ստացողների հասցեներին: '; +$PHPMAILER_LANG['signing'] = 'Ստորագրման սխալ: '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'SMTP -ի connect() ֆունկցիան չի հաջողվել'; +$PHPMAILER_LANG['smtp_error'] = 'SMTP սերվերի սխալ: '; +$PHPMAILER_LANG['variable_set'] = 'Չի հաջողվում ստեղծել կամ վերափոխել փոփոխականը: '; +$PHPMAILER_LANG['extension_missing'] = 'Հավելվածը բացակայում է: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-ar.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-ar.php new file mode 100644 index 00000000..865d0b73 --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-ar.php @@ -0,0 +1,27 @@ + + */ + +$PHPMAILER_LANG['authenticate'] = 'خطأ SMTP : لا يمكن تأكيد الهوية.'; +$PHPMAILER_LANG['connect_host'] = 'خطأ SMTP: لا يمكن الاتصال بالخادم SMTP.'; +$PHPMAILER_LANG['data_not_accepted'] = 'خطأ SMTP: لم يتم قبول المعلومات .'; +$PHPMAILER_LANG['empty_message'] = 'نص الرسالة فارغ'; +$PHPMAILER_LANG['encoding'] = 'ترميز غير معروف: '; +$PHPMAILER_LANG['execute'] = 'لا يمكن تنفيذ : '; +$PHPMAILER_LANG['file_access'] = 'لا يمكن الوصول للملف: '; +$PHPMAILER_LANG['file_open'] = 'خطأ في الملف: لا يمكن فتحه: '; +$PHPMAILER_LANG['from_failed'] = 'خطأ على مستوى عنوان المرسل : '; +$PHPMAILER_LANG['instantiate'] = 'لا يمكن توفير خدمة البريد.'; +$PHPMAILER_LANG['invalid_address'] = 'الإرسال غير ممكن لأن عنوان البريد الإلكتروني غير صالح: '; +$PHPMAILER_LANG['mailer_not_supported'] = ' برنامج الإرسال غير مدعوم.'; +$PHPMAILER_LANG['provide_address'] = 'يجب توفير عنوان البريد الإلكتروني لمستلم واحد على الأقل.'; +$PHPMAILER_LANG['recipients_failed'] = 'خطأ SMTP: الأخطاء التالية ' . + 'فشل في الارسال لكل من : '; +$PHPMAILER_LANG['signing'] = 'خطأ في التوقيع: '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'SMTP Connect() غير ممكن.'; +$PHPMAILER_LANG['smtp_error'] = 'خطأ على مستوى الخادم SMTP: '; +$PHPMAILER_LANG['variable_set'] = 'لا يمكن تعيين أو إعادة تعيين متغير: '; +$PHPMAILER_LANG['extension_missing'] = 'الإضافة غير موجودة: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-az.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-az.php new file mode 100644 index 00000000..3749d83d --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-az.php @@ -0,0 +1,26 @@ + + */ + +$PHPMAILER_LANG['authenticate'] = 'SMTP Greška: Neuspjela prijava.'; +$PHPMAILER_LANG['connect_host'] = 'SMTP Greška: Nije moguće spojiti se sa SMTP serverom.'; +$PHPMAILER_LANG['data_not_accepted'] = 'SMTP Greška: Podatci nisu prihvaćeni.'; +$PHPMAILER_LANG['empty_message'] = 'Sadržaj poruke je prazan.'; +$PHPMAILER_LANG['encoding'] = 'Nepoznata kriptografija: '; +$PHPMAILER_LANG['execute'] = 'Nije moguće izvršiti naredbu: '; +$PHPMAILER_LANG['file_access'] = 'Nije moguće pristupiti datoteci: '; +$PHPMAILER_LANG['file_open'] = 'Nije moguće otvoriti datoteku: '; +$PHPMAILER_LANG['from_failed'] = 'SMTP Greška: Slanje sa navedenih e-mail adresa nije uspjelo: '; +$PHPMAILER_LANG['recipients_failed'] = 'SMTP Greška: Slanje na navedene e-mail adrese nije uspjelo: '; +$PHPMAILER_LANG['instantiate'] = 'Ne mogu pokrenuti mail funkcionalnost.'; +$PHPMAILER_LANG['invalid_address'] = 'E-mail nije poslan. Neispravna e-mail adresa: '; +$PHPMAILER_LANG['mailer_not_supported'] = ' mailer nije podržan.'; +$PHPMAILER_LANG['provide_address'] = 'Definišite barem jednu adresu primaoca.'; +$PHPMAILER_LANG['signing'] = 'Greška prilikom prijave: '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'Spajanje na SMTP server nije uspjelo.'; +$PHPMAILER_LANG['smtp_error'] = 'SMTP greška: '; +$PHPMAILER_LANG['variable_set'] = 'Nije moguće postaviti varijablu ili je vratiti nazad: '; +$PHPMAILER_LANG['extension_missing'] = 'Nedostaje ekstenzija: '; \ No newline at end of file diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-be.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-be.php new file mode 100644 index 00000000..e2f98f0f --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-be.php @@ -0,0 +1,26 @@ + + */ + +$PHPMAILER_LANG['authenticate'] = 'Памылка SMTP: памылка ідэнтыфікацыі.'; +$PHPMAILER_LANG['connect_host'] = 'Памылка SMTP: нельга ўстанавіць сувязь з SMTP-серверам.'; +$PHPMAILER_LANG['data_not_accepted'] = 'Памылка SMTP: звесткі непрынятыя.'; +$PHPMAILER_LANG['empty_message'] = 'Пустое паведамленне.'; +$PHPMAILER_LANG['encoding'] = 'Невядомая кадыроўка тэксту: '; +$PHPMAILER_LANG['execute'] = 'Нельга выканаць каманду: '; +$PHPMAILER_LANG['file_access'] = 'Няма доступу да файла: '; +$PHPMAILER_LANG['file_open'] = 'Нельга адкрыць файл: '; +$PHPMAILER_LANG['from_failed'] = 'Няправільны адрас адпраўніка: '; +$PHPMAILER_LANG['instantiate'] = 'Нельга прымяніць функцыю mail().'; +$PHPMAILER_LANG['invalid_address'] = 'Нельга даслаць паведамленне, няправільны email атрымальніка: '; +$PHPMAILER_LANG['provide_address'] = 'Запоўніце, калі ласка, правільны email атрымальніка.'; +$PHPMAILER_LANG['mailer_not_supported'] = ' - паштовы сервер не падтрымліваецца.'; +$PHPMAILER_LANG['recipients_failed'] = 'Памылка SMTP: няправільныя атрымальнікі: '; +$PHPMAILER_LANG['signing'] = 'Памылка подпісу паведамлення: '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'Памылка сувязі з SMTP-серверам.'; +$PHPMAILER_LANG['smtp_error'] = 'Памылка SMTP: '; +$PHPMAILER_LANG['variable_set'] = 'Нельга ўстанавіць або перамяніць значэнне пераменнай: '; +//$PHPMAILER_LANG['extension_missing'] = 'Extension missing: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-bg.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-bg.php new file mode 100644 index 00000000..b22941f6 --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-bg.php @@ -0,0 +1,26 @@ + + */ + +$PHPMAILER_LANG['authenticate'] = 'SMTP грешка: Не може да се удостовери пред сървъра.'; +$PHPMAILER_LANG['connect_host'] = 'SMTP грешка: Не може да се свърже с SMTP хоста.'; +$PHPMAILER_LANG['data_not_accepted'] = 'SMTP грешка: данните не са приети.'; +$PHPMAILER_LANG['empty_message'] = 'Съдържанието на съобщението е празно'; +$PHPMAILER_LANG['encoding'] = 'Неизвестно кодиране: '; +$PHPMAILER_LANG['execute'] = 'Не може да се изпълни: '; +$PHPMAILER_LANG['file_access'] = 'Няма достъп до файл: '; +$PHPMAILER_LANG['file_open'] = 'Файлова грешка: Не може да се отвори файл: '; +$PHPMAILER_LANG['from_failed'] = 'Следните адреси за подател са невалидни: '; +$PHPMAILER_LANG['instantiate'] = 'Не може да се инстанцира функцията mail.'; +$PHPMAILER_LANG['invalid_address'] = 'Невалиден адрес: '; +$PHPMAILER_LANG['mailer_not_supported'] = ' - пощенски сървър не се поддържа.'; +$PHPMAILER_LANG['provide_address'] = 'Трябва да предоставите поне един email адрес за получател.'; +$PHPMAILER_LANG['recipients_failed'] = 'SMTP грешка: Следните адреси за Получател са невалидни: '; +$PHPMAILER_LANG['signing'] = 'Грешка при подписване: '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'SMTP провален connect().'; +$PHPMAILER_LANG['smtp_error'] = 'SMTP сървърна грешка: '; +$PHPMAILER_LANG['variable_set'] = 'Не може да се установи или възстанови променлива: '; +$PHPMAILER_LANG['extension_missing'] = 'Липсва разширение: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-ca.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-ca.php new file mode 100644 index 00000000..4117596c --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-ca.php @@ -0,0 +1,26 @@ + + */ + +$PHPMAILER_LANG['authenticate'] = 'Error SMTP: No s’ha pogut autenticar.'; +$PHPMAILER_LANG['connect_host'] = 'Error SMTP: No es pot connectar al servidor SMTP.'; +$PHPMAILER_LANG['data_not_accepted'] = 'Error SMTP: Dades no acceptades.'; +$PHPMAILER_LANG['empty_message'] = 'El cos del missatge està buit.'; +$PHPMAILER_LANG['encoding'] = 'Codificació desconeguda: '; +$PHPMAILER_LANG['execute'] = 'No es pot executar: '; +$PHPMAILER_LANG['file_access'] = 'No es pot accedir a l’arxiu: '; +$PHPMAILER_LANG['file_open'] = 'Error d’Arxiu: No es pot obrir l’arxiu: '; +$PHPMAILER_LANG['from_failed'] = 'La(s) següent(s) adreces de remitent han fallat: '; +$PHPMAILER_LANG['instantiate'] = 'No s’ha pogut crear una instància de la funció Mail.'; +$PHPMAILER_LANG['invalid_address'] = 'Adreça d’email invalida: '; +$PHPMAILER_LANG['mailer_not_supported'] = ' mailer no està suportat'; +$PHPMAILER_LANG['provide_address'] = 'S’ha de proveir almenys una adreça d’email com a destinatari.'; +$PHPMAILER_LANG['recipients_failed'] = 'Error SMTP: Els següents destinataris han fallat: '; +$PHPMAILER_LANG['signing'] = 'Error al signar: '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'Ha fallat el SMTP Connect().'; +$PHPMAILER_LANG['smtp_error'] = 'Error del servidor SMTP: '; +$PHPMAILER_LANG['variable_set'] = 'No s’ha pogut establir o restablir la variable: '; +//$PHPMAILER_LANG['extension_missing'] = 'Extension missing: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-ch.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-ch.php new file mode 100644 index 00000000..4fda6b85 --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-ch.php @@ -0,0 +1,26 @@ + + */ + +$PHPMAILER_LANG['authenticate'] = 'SMTP 错误：身份验证失败。'; +$PHPMAILER_LANG['connect_host'] = 'SMTP 错误: 不能连接SMTP主机。'; +$PHPMAILER_LANG['data_not_accepted'] = 'SMTP 错误: 数据不可接受。'; +//$PHPMAILER_LANG['empty_message'] = 'Message body empty'; +$PHPMAILER_LANG['encoding'] = '未知编码：'; +$PHPMAILER_LANG['execute'] = '不能执行: '; +$PHPMAILER_LANG['file_access'] = '不能访问文件：'; +$PHPMAILER_LANG['file_open'] = '文件错误：不能打开文件：'; +$PHPMAILER_LANG['from_failed'] = '下面的发送地址邮件发送失败了： '; +$PHPMAILER_LANG['instantiate'] = '不能实现mail方法。'; +//$PHPMAILER_LANG['invalid_address'] = 'Invalid address: '; +$PHPMAILER_LANG['mailer_not_supported'] = ' 您所选择的发送邮件的方法并不支持。'; +$PHPMAILER_LANG['provide_address'] = '您必须提供至少一个 收信人的email地址。'; +$PHPMAILER_LANG['recipients_failed'] = 'SMTP 错误： 下面的 收件人失败了： '; +//$PHPMAILER_LANG['signing'] = 'Signing Error: '; +//$PHPMAILER_LANG['smtp_connect_failed'] = 'SMTP Connect() failed.'; +//$PHPMAILER_LANG['smtp_error'] = 'SMTP server error: '; +//$PHPMAILER_LANG['variable_set'] = 'Cannot set or reset variable: '; +//$PHPMAILER_LANG['extension_missing'] = 'Extension missing: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-cs.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-cs.php new file mode 100644 index 00000000..1160cf0c --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-cs.php @@ -0,0 +1,25 @@ + + */ + +$PHPMAILER_LANG['authenticate'] = 'SMTP fejl: Kunne ikke logge på.'; +$PHPMAILER_LANG['connect_host'] = 'SMTP fejl: Kunne ikke tilslutte SMTP serveren.'; +$PHPMAILER_LANG['data_not_accepted'] = 'SMTP fejl: Data kunne ikke accepteres.'; +//$PHPMAILER_LANG['empty_message'] = 'Message body empty'; +$PHPMAILER_LANG['encoding'] = 'Ukendt encode-format: '; +$PHPMAILER_LANG['execute'] = 'Kunne ikke køre: '; +$PHPMAILER_LANG['file_access'] = 'Ingen adgang til fil: '; +$PHPMAILER_LANG['file_open'] = 'Fil fejl: Kunne ikke åbne filen: '; +$PHPMAILER_LANG['from_failed'] = 'Følgende afsenderadresse er forkert: '; +$PHPMAILER_LANG['instantiate'] = 'Kunne ikke initialisere email funktionen.'; +//$PHPMAILER_LANG['invalid_address'] = 'Invalid address: '; +$PHPMAILER_LANG['mailer_not_supported'] = ' mailer understøttes ikke.'; +$PHPMAILER_LANG['provide_address'] = 'Du skal indtaste mindst en modtagers emailadresse.'; +$PHPMAILER_LANG['recipients_failed'] = 'SMTP fejl: Følgende modtagere er forkerte: '; +//$PHPMAILER_LANG['signing'] = 'Signing Error: '; +//$PHPMAILER_LANG['smtp_connect_failed'] = 'SMTP Connect() failed.'; +//$PHPMAILER_LANG['smtp_error'] = 'SMTP server error: '; +//$PHPMAILER_LANG['variable_set'] = 'Cannot set or reset variable: '; +//$PHPMAILER_LANG['extension_missing'] = 'Extension missing: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-de.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-de.php new file mode 100644 index 00000000..aa987a9c --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-de.php @@ -0,0 +1,25 @@ + + */ + +$PHPMAILER_LANG['authenticate'] = 'Error SMTP: Imposible autentificar.'; +$PHPMAILER_LANG['connect_host'] = 'Error SMTP: Imposible conectar al servidor SMTP.'; +$PHPMAILER_LANG['data_not_accepted'] = 'Error SMTP: Datos no aceptados.'; +$PHPMAILER_LANG['empty_message'] = 'El cuerpo del mensaje está vacío.'; +$PHPMAILER_LANG['encoding'] = 'Codificación desconocida: '; +$PHPMAILER_LANG['execute'] = 'Imposible ejecutar: '; +$PHPMAILER_LANG['file_access'] = 'Imposible acceder al archivo: '; +$PHPMAILER_LANG['file_open'] = 'Error de Archivo: Imposible abrir el archivo: '; +$PHPMAILER_LANG['from_failed'] = 'La(s) siguiente(s) direcciones de remitente fallaron: '; +$PHPMAILER_LANG['instantiate'] = 'Imposible crear una instancia de la función Mail.'; +$PHPMAILER_LANG['invalid_address'] = 'Imposible enviar: dirección de email inválido: '; +$PHPMAILER_LANG['mailer_not_supported'] = ' mailer no está soportado.'; +$PHPMAILER_LANG['provide_address'] = 'Debe proporcionar al menos una dirección de email de destino.'; +$PHPMAILER_LANG['recipients_failed'] = 'Error SMTP: Los siguientes destinos fallaron: '; +$PHPMAILER_LANG['signing'] = 'Error al firmar: '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'SMTP Connect() falló.'; +$PHPMAILER_LANG['smtp_error'] = 'Error del servidor SMTP: '; +$PHPMAILER_LANG['variable_set'] = 'No se pudo configurar la variable: '; +$PHPMAILER_LANG['extension_missing'] = 'Extensión faltante: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-et.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-et.php new file mode 100644 index 00000000..7e06da13 --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-et.php @@ -0,0 +1,27 @@ + + */ + +$PHPMAILER_LANG['authenticate'] = 'SMTP Viga: Autoriseerimise viga.'; +$PHPMAILER_LANG['connect_host'] = 'SMTP Viga: Ei õnnestunud luua ühendust SMTP serveriga.'; +$PHPMAILER_LANG['data_not_accepted'] = 'SMTP Viga: Vigased andmed.'; +$PHPMAILER_LANG['empty_message'] = 'Tühi kirja sisu'; +$PHPMAILER_LANG["encoding"] = 'Tundmatu kodeering: '; +$PHPMAILER_LANG['execute'] = 'Tegevus ebaõnnestus: '; +$PHPMAILER_LANG['file_access'] = 'Pole piisavalt õiguseid järgneva faili avamiseks: '; +$PHPMAILER_LANG['file_open'] = 'Faili Viga: Faili avamine ebaõnnestus: '; +$PHPMAILER_LANG['from_failed'] = 'Järgnev saatja e-posti aadress on vigane: '; +$PHPMAILER_LANG['instantiate'] = 'mail funktiooni käivitamine ebaõnnestus.'; +$PHPMAILER_LANG['invalid_address'] = 'Saatmine peatatud, e-posti address vigane: '; +$PHPMAILER_LANG['provide_address'] = 'Te peate määrama vähemalt ühe saaja e-posti aadressi.'; +$PHPMAILER_LANG['mailer_not_supported'] = ' maileri tugi puudub.'; +$PHPMAILER_LANG['recipients_failed'] = 'SMTP Viga: Järgnevate saajate e-posti aadressid on vigased: '; +$PHPMAILER_LANG["signing"] = 'Viga allkirjastamisel: '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'SMTP Connect() ebaõnnestus.'; +$PHPMAILER_LANG['smtp_error'] = 'SMTP serveri viga: '; +$PHPMAILER_LANG['variable_set'] = 'Ei õnnestunud määrata või lähtestada muutujat: '; +$PHPMAILER_LANG['extension_missing'] = 'Nõutud laiendus on puudu: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-fa.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-fa.php new file mode 100644 index 00000000..8aa0ad22 --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-fa.php @@ -0,0 +1,27 @@ + + * @author Mohammad Hossein Mojtahedi + */ + +$PHPMAILER_LANG['authenticate'] = 'خطای SMTP: احراز هویت با شکست مواجه شد.'; +$PHPMAILER_LANG['connect_host'] = 'خطای SMTP: اتصال به سرور SMTP برقرار نشد.'; +$PHPMAILER_LANG['data_not_accepted'] = 'خطای SMTP: داده‌ها نا‌درست هستند.'; +$PHPMAILER_LANG['empty_message'] = 'بخش متن پیام خالی است.'; +$PHPMAILER_LANG['encoding'] = 'کد‌گذاری نا‌شناخته: '; +$PHPMAILER_LANG['execute'] = 'امکان اجرا وجود ندارد: '; +$PHPMAILER_LANG['file_access'] = 'امکان دسترسی به فایل وجود ندارد: '; +$PHPMAILER_LANG['file_open'] = 'خطای File: امکان بازکردن فایل وجود ندارد: '; +$PHPMAILER_LANG['from_failed'] = 'آدرس فرستنده اشتباه است: '; +$PHPMAILER_LANG['instantiate'] = 'امکان معرفی تابع ایمیل وجود ندارد.'; +$PHPMAILER_LANG['invalid_address'] = 'آدرس ایمیل معتبر نیست: '; +$PHPMAILER_LANG['mailer_not_supported'] = ' mailer پشتیبانی نمی‌شود.'; +$PHPMAILER_LANG['provide_address'] = 'باید حداقل یک آدرس گیرنده وارد کنید.'; +$PHPMAILER_LANG['recipients_failed'] = 'خطای SMTP: ارسال به آدرس گیرنده با خطا مواجه شد: '; +$PHPMAILER_LANG['signing'] = 'خطا در امضا: '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'خطا در اتصال به SMTP.'; +$PHPMAILER_LANG['smtp_error'] = 'خطا در SMTP Server: '; +$PHPMAILER_LANG['variable_set'] = 'امکان ارسال یا ارسال مجدد متغیر‌ها وجود ندارد: '; +$PHPMAILER_LANG['extension_missing'] = 'افزونه موجود نیست: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-fi.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-fi.php new file mode 100644 index 00000000..ec4e7523 --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-fi.php @@ -0,0 +1,27 @@ + + */ + +$PHPMAILER_LANG['authenticate'] = 'SMTP feilur: Kundi ikki góðkenna.'; +$PHPMAILER_LANG['connect_host'] = 'SMTP feilur: Kundi ikki knýta samband við SMTP vert.'; +$PHPMAILER_LANG['data_not_accepted'] = 'SMTP feilur: Data ikki góðkent.'; +//$PHPMAILER_LANG['empty_message'] = 'Message body empty'; +$PHPMAILER_LANG['encoding'] = 'Ókend encoding: '; +$PHPMAILER_LANG['execute'] = 'Kundi ikki útføra: '; +$PHPMAILER_LANG['file_access'] = 'Kundi ikki tilganga fílu: '; +$PHPMAILER_LANG['file_open'] = 'Fílu feilur: Kundi ikki opna fílu: '; +$PHPMAILER_LANG['from_failed'] = 'fylgjandi Frá/From adressa miseydnaðist: '; +$PHPMAILER_LANG['instantiate'] = 'Kuni ikki instantiera mail funktión.'; +//$PHPMAILER_LANG['invalid_address'] = 'Invalid address: '; +$PHPMAILER_LANG['mailer_not_supported'] = ' er ikki supporterað.'; +$PHPMAILER_LANG['provide_address'] = 'Tú skal uppgeva minst móttakara-emailadressu(r).'; +$PHPMAILER_LANG['recipients_failed'] = 'SMTP Feilur: Fylgjandi móttakarar miseydnaðust: '; +//$PHPMAILER_LANG['signing'] = 'Signing Error: '; +//$PHPMAILER_LANG['smtp_connect_failed'] = 'SMTP Connect() failed.'; +//$PHPMAILER_LANG['smtp_error'] = 'SMTP server error: '; +//$PHPMAILER_LANG['variable_set'] = 'Cannot set or reset variable: '; +//$PHPMAILER_LANG['extension_missing'] = 'Extension missing: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-fr.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-fr.php new file mode 100644 index 00000000..af68c923 --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-fr.php @@ -0,0 +1,29 @@ + + */ + +$PHPMAILER_LANG['authenticate'] = 'Erro SMTP: Non puido ser autentificado.'; +$PHPMAILER_LANG['connect_host'] = 'Erro SMTP: Non puido conectar co servidor SMTP.'; +$PHPMAILER_LANG['data_not_accepted'] = 'Erro SMTP: Datos non aceptados.'; +$PHPMAILER_LANG['empty_message'] = 'Corpo da mensaxe vacía'; +$PHPMAILER_LANG['encoding'] = 'Codificación descoñecida: '; +$PHPMAILER_LANG['execute'] = 'Non puido ser executado: '; +$PHPMAILER_LANG['file_access'] = 'Nob puido acceder ó arquivo: '; +$PHPMAILER_LANG['file_open'] = 'Erro de Arquivo: No puido abrir o arquivo: '; +$PHPMAILER_LANG['from_failed'] = 'A(s) seguinte(s) dirección(s) de remitente(s) deron erro: '; +$PHPMAILER_LANG['instantiate'] = 'Non puido crear unha instancia da función Mail.'; +$PHPMAILER_LANG['invalid_address'] = 'Non puido envia-lo correo: dirección de email inválida: '; +$PHPMAILER_LANG['mailer_not_supported'] = ' mailer non está soportado.'; +$PHPMAILER_LANG['provide_address'] = 'Debe engadir polo menos unha dirección de email coma destino.'; +$PHPMAILER_LANG['recipients_failed'] = 'Erro SMTP: Os seguintes destinos fallaron: '; +$PHPMAILER_LANG['signing'] = 'Erro ó firmar: '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'SMTP Connect() fallou.'; +$PHPMAILER_LANG['smtp_error'] = 'Erro do servidor SMTP: '; +$PHPMAILER_LANG['variable_set'] = 'Non puidemos axustar ou reaxustar a variábel: '; +//$PHPMAILER_LANG['extension_missing'] = 'Extension missing: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-he.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-he.php new file mode 100644 index 00000000..70eb7175 --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-he.php @@ -0,0 +1,26 @@ + + */ + +$PHPMAILER_LANG['authenticate'] = 'שגיאת SMTP: פעולת האימות נכשלה.'; +$PHPMAILER_LANG['connect_host'] = 'שגיאת SMTP: לא הצלחתי להתחבר לשרת SMTP.'; +$PHPMAILER_LANG['data_not_accepted'] = 'שגיאת SMTP: מידע לא התקבל.'; +$PHPMAILER_LANG['empty_message'] = 'גוף ההודעה ריק'; +$PHPMAILER_LANG['invalid_address'] = 'כתובת שגויה: '; +$PHPMAILER_LANG['encoding'] = 'קידוד לא מוכר: '; +$PHPMAILER_LANG['execute'] = 'לא הצלחתי להפעיל את: '; +$PHPMAILER_LANG['file_access'] = 'לא ניתן לגשת לקובץ: '; +$PHPMAILER_LANG['file_open'] = 'שגיאת קובץ: לא ניתן לגשת לקובץ: '; +$PHPMAILER_LANG['from_failed'] = 'כתובות הנמענים הבאות נכשלו: '; +$PHPMAILER_LANG['instantiate'] = 'לא הצלחתי להפעיל את פונקציית המייל.'; +$PHPMAILER_LANG['mailer_not_supported'] = ' אינה נתמכת.'; +$PHPMAILER_LANG['provide_address'] = 'חובה לספק לפחות כתובת אחת של מקבל המייל.'; +$PHPMAILER_LANG['recipients_failed'] = 'שגיאת SMTP: הנמענים הבאים נכשלו: '; +$PHPMAILER_LANG['signing'] = 'שגיאת חתימה: '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'SMTP Connect() failed.'; +$PHPMAILER_LANG['smtp_error'] = 'שגיאת שרת SMTP: '; +$PHPMAILER_LANG['variable_set'] = 'לא ניתן לקבוע או לשנות את המשתנה: '; +//$PHPMAILER_LANG['extension_missing'] = 'Extension missing: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-hi.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-hi.php new file mode 100644 index 00000000..607a5ee3 --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-hi.php @@ -0,0 +1,26 @@ + + */ + +$PHPMAILER_LANG['authenticate'] = 'SMTP त्रुटि: प्रामाणिकता की जांच नहीं हो सका। '; +$PHPMAILER_LANG['connect_host'] = 'SMTP त्रुटि: SMTP सर्वर से कनेक्ट नहीं हो सका। '; +$PHPMAILER_LANG['data_not_accepted'] = 'SMTP त्रुटि: डेटा स्वीकार नहीं किया जाता है। '; +$PHPMAILER_LANG['empty_message'] = 'संदेश खाली है। '; +$PHPMAILER_LANG['encoding'] = 'अज्ञात एन्कोडिंग प्रकार। '; +$PHPMAILER_LANG['execute'] = 'आदेश को निष्पादित करने में विफल। '; +$PHPMAILER_LANG['file_access'] = 'फ़ाइल उपलब्ध नहीं है। '; +$PHPMAILER_LANG['file_open'] = 'फ़ाइल त्रुटि: फाइल को खोला नहीं जा सका। '; +$PHPMAILER_LANG['from_failed'] = 'प्रेषक का पता गलत है। '; +$PHPMAILER_LANG['instantiate'] = 'मेल फ़ंक्शन कॉल नहीं कर सकता है।'; +$PHPMAILER_LANG['invalid_address'] = 'पता गलत है। '; +$PHPMAILER_LANG['mailer_not_supported'] = 'मेल सर्वर के साथ काम नहीं करता है। '; +$PHPMAILER_LANG['provide_address'] = 'आपको कम से कम एक प्राप्तकर्ता का ई-मेल पता प्रदान करना होगा।'; +$PHPMAILER_LANG['recipients_failed'] = 'SMTP त्रुटि: निम्न प्राप्तकर्ताओं को पते भेजने में विफल। '; +$PHPMAILER_LANG['signing'] = 'साइनअप त्रुटि:। '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'SMTP का connect () फ़ंक्शन विफल हुआ। '; +$PHPMAILER_LANG['smtp_error'] = 'SMTP सर्वर त्रुटि। '; +$PHPMAILER_LANG['variable_set'] = 'चर को बना या संशोधित नहीं किया जा सकता। '; +$PHPMAILER_LANG['extension_missing'] = 'एक्सटेन्षन गायब है: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-hr.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-hr.php new file mode 100644 index 00000000..3822920a --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-hr.php @@ -0,0 +1,26 @@ + + */ + +$PHPMAILER_LANG['authenticate'] = 'SMTP Greška: Neuspjela autentikacija.'; +$PHPMAILER_LANG['connect_host'] = 'SMTP Greška: Ne mogu se spojiti na SMTP poslužitelj.'; +$PHPMAILER_LANG['data_not_accepted'] = 'SMTP Greška: Podatci nisu prihvaćeni.'; +$PHPMAILER_LANG['empty_message'] = 'Sadržaj poruke je prazan.'; +$PHPMAILER_LANG['encoding'] = 'Nepoznati encoding: '; +$PHPMAILER_LANG['execute'] = 'Nije moguće izvršiti naredbu: '; +$PHPMAILER_LANG['file_access'] = 'Nije moguće pristupiti datoteci: '; +$PHPMAILER_LANG['file_open'] = 'Nije moguće otvoriti datoteku: '; +$PHPMAILER_LANG['from_failed'] = 'SMTP Greška: Slanje s navedenih e-mail adresa nije uspjelo: '; +$PHPMAILER_LANG['recipients_failed'] = 'SMTP Greška: Slanje na navedenih e-mail adresa nije uspjelo: '; +$PHPMAILER_LANG['instantiate'] = 'Ne mogu pokrenuti mail funkcionalnost.'; +$PHPMAILER_LANG['invalid_address'] = 'E-mail nije poslan. Neispravna e-mail adresa: '; +$PHPMAILER_LANG['mailer_not_supported'] = ' mailer nije podržan.'; +$PHPMAILER_LANG['provide_address'] = 'Definirajte barem jednu adresu primatelja.'; +$PHPMAILER_LANG['signing'] = 'Greška prilikom prijave: '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'Spajanje na SMTP poslužitelj nije uspjelo.'; +$PHPMAILER_LANG['smtp_error'] = 'Greška SMTP poslužitelja: '; +$PHPMAILER_LANG['variable_set'] = 'Ne mogu postaviti varijablu niti ju vratiti nazad: '; +$PHPMAILER_LANG['extension_missing'] = 'Nedostaje proširenje: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-hu.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-hu.php new file mode 100644 index 00000000..196cddc2 --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-hu.php @@ -0,0 +1,26 @@ + + * @author @januridp + */ + +$PHPMAILER_LANG['authenticate'] = 'Kesalahan SMTP: Tidak dapat mengotentikasi.'; +$PHPMAILER_LANG['connect_host'] = 'Kesalahan SMTP: Tidak dapat terhubung ke host SMTP.'; +$PHPMAILER_LANG['data_not_accepted'] = 'Kesalahan SMTP: Data tidak diterima.'; +$PHPMAILER_LANG['empty_message'] = 'Isi pesan kosong'; +$PHPMAILER_LANG['encoding'] = 'Pengkodean karakter tidak dikenali: '; +$PHPMAILER_LANG['execute'] = 'Tidak dapat menjalankan proses : '; +$PHPMAILER_LANG['file_access'] = 'Tidak dapat mengakses berkas : '; +$PHPMAILER_LANG['file_open'] = 'Kesalahan File: Berkas tidak dapat dibuka : '; +$PHPMAILER_LANG['from_failed'] = 'Alamat pengirim berikut mengakibatkan kesalahan : '; +$PHPMAILER_LANG['instantiate'] = 'Tidak dapat menginisialisasi fungsi surel'; +$PHPMAILER_LANG['invalid_address'] = 'Gagal terkirim, alamat surel tidak benar : '; +$PHPMAILER_LANG['provide_address'] = 'Harus disediakan minimal satu alamat tujuan'; +$PHPMAILER_LANG['mailer_not_supported'] = ' mailer tidak didukung'; +$PHPMAILER_LANG['recipients_failed'] = 'Kesalahan SMTP: Alamat tujuan berikut menghasilkan kesalahan : '; +$PHPMAILER_LANG['signing'] = 'Kesalahan dalam tanda tangan : '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'SMTP Connect() gagal.'; +$PHPMAILER_LANG['smtp_error'] = 'Kesalahan pada pelayan SMTP : '; +$PHPMAILER_LANG['variable_set'] = 'Tidak dapat mengatur atau mengatur ulang variable : '; +$PHPMAILER_LANG['extension_missing'] = 'Ekstensi hilang: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-it.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-it.php new file mode 100644 index 00000000..e67b6f72 --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-it.php @@ -0,0 +1,27 @@ + + * @author Stefano Sabatini + */ + +$PHPMAILER_LANG['authenticate'] = 'SMTP Error: Impossibile autenticarsi.'; +$PHPMAILER_LANG['connect_host'] = 'SMTP Error: Impossibile connettersi all\'host SMTP.'; +$PHPMAILER_LANG['data_not_accepted'] = 'SMTP Error: Dati non accettati dal server.'; +$PHPMAILER_LANG['empty_message'] = 'Il corpo del messaggio è vuoto'; +$PHPMAILER_LANG['encoding'] = 'Codifica dei caratteri sconosciuta: '; +$PHPMAILER_LANG['execute'] = 'Impossibile eseguire l\'operazione: '; +$PHPMAILER_LANG['file_access'] = 'Impossibile accedere al file: '; +$PHPMAILER_LANG['file_open'] = 'File Error: Impossibile aprire il file: '; +$PHPMAILER_LANG['from_failed'] = 'I seguenti indirizzi mittenti hanno generato errore: '; +$PHPMAILER_LANG['instantiate'] = 'Impossibile istanziare la funzione mail'; +$PHPMAILER_LANG['invalid_address'] = 'Impossibile inviare, l\'indirizzo email non è valido: '; +$PHPMAILER_LANG['provide_address'] = 'Deve essere fornito almeno un indirizzo ricevente'; +$PHPMAILER_LANG['mailer_not_supported'] = 'Mailer non supportato'; +$PHPMAILER_LANG['recipients_failed'] = 'SMTP Error: I seguenti indirizzi destinatari hanno generato un errore: '; +$PHPMAILER_LANG['signing'] = 'Errore nella firma: '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'SMTP Connect() fallita.'; +$PHPMAILER_LANG['smtp_error'] = 'Errore del server SMTP: '; +$PHPMAILER_LANG['variable_set'] = 'Impossibile impostare o resettare la variabile: '; +$PHPMAILER_LANG['extension_missing'] = 'Estensione mancante: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-ja.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-ja.php new file mode 100644 index 00000000..2d778728 --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-ja.php @@ -0,0 +1,27 @@ + + * @author Yoshi Sakai + */ + +$PHPMAILER_LANG['authenticate'] = 'SMTPエラー: 認証できませんでした。'; +$PHPMAILER_LANG['connect_host'] = 'SMTPエラー: SMTPホストに接続できませんでした。'; +$PHPMAILER_LANG['data_not_accepted'] = 'SMTPエラー: データが受け付けられませんでした。'; +//$PHPMAILER_LANG['empty_message'] = 'Message body empty'; +$PHPMAILER_LANG['encoding'] = '不明なエンコーディング: '; +$PHPMAILER_LANG['execute'] = '実行できませんでした: '; +$PHPMAILER_LANG['file_access'] = 'ファイルにアクセスできません: '; +$PHPMAILER_LANG['file_open'] = 'ファイルエラー: ファイルを開けません: '; +$PHPMAILER_LANG['from_failed'] = 'Fromアドレスを登録する際にエラーが発生しました: '; +$PHPMAILER_LANG['instantiate'] = 'メール関数が正常に動作しませんでした。'; +//$PHPMAILER_LANG['invalid_address'] = 'Invalid address: '; +$PHPMAILER_LANG['provide_address'] = '少なくとも1つメールアドレスを 指定する必要があります。'; +$PHPMAILER_LANG['mailer_not_supported'] = ' メーラーがサポートされていません。'; +$PHPMAILER_LANG['recipients_failed'] = 'SMTPエラー: 次の受信者アドレスに 間違いがあります: '; +//$PHPMAILER_LANG['signing'] = 'Signing Error: '; +//$PHPMAILER_LANG['smtp_connect_failed'] = 'SMTP Connect() failed.'; +//$PHPMAILER_LANG['smtp_error'] = 'SMTP server error: '; +//$PHPMAILER_LANG['variable_set'] = 'Cannot set or reset variable: '; +//$PHPMAILER_LANG['extension_missing'] = 'Extension missing: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-ka.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-ka.php new file mode 100644 index 00000000..dd1af8ab --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-ka.php @@ -0,0 +1,26 @@ + + */ + +$PHPMAILER_LANG['authenticate'] = 'SMTP შეცდომა: ავტორიზაცია შეუძლებელია.'; +$PHPMAILER_LANG['connect_host'] = 'SMTP შეცდომა: SMTP სერვერთან დაკავშირება შეუძლებელია.'; +$PHPMAILER_LANG['data_not_accepted'] = 'SMTP შეცდომა: მონაცემები არ იქნა მიღებული.'; +$PHPMAILER_LANG['encoding'] = 'კოდირების უცნობი ტიპი: '; +$PHPMAILER_LANG['execute'] = 'შეუძლებელია შემდეგი ბრძანების შესრულება: '; +$PHPMAILER_LANG['file_access'] = 'შეუძლებელია წვდომა ფაილთან: '; +$PHPMAILER_LANG['file_open'] = 'ფაილური სისტემის შეცდომა: არ იხსნება ფაილი: '; +$PHPMAILER_LANG['from_failed'] = 'გამგზავნის არასწორი მისამართი: '; +$PHPMAILER_LANG['instantiate'] = 'mail ფუნქციის გაშვება ვერ ხერხდება.'; +$PHPMAILER_LANG['provide_address'] = 'გთხოვთ მიუთითოთ ერთი ადრესატის e-mail მისამართი მაინც.'; +$PHPMAILER_LANG['mailer_not_supported'] = ' - საფოსტო სერვერის მხარდაჭერა არ არის.'; +$PHPMAILER_LANG['recipients_failed'] = 'SMTP შეცდომა: შემდეგ მისამართებზე გაგზავნა ვერ მოხერხდა: '; +$PHPMAILER_LANG['empty_message'] = 'შეტყობინება ცარიელია'; +$PHPMAILER_LANG['invalid_address'] = 'არ გაიგზავნა, e-mail მისამართის არასწორი ფორმატი: '; +$PHPMAILER_LANG['signing'] = 'ხელმოწერის შეცდომა: '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'შეცდომა SMTP სერვერთან დაკავშირებისას'; +$PHPMAILER_LANG['smtp_error'] = 'SMTP სერვერის შეცდომა: '; +$PHPMAILER_LANG['variable_set'] = 'შეუძლებელია შემდეგი ცვლადის შექმნა ან შეცვლა: '; +$PHPMAILER_LANG['extension_missing'] = 'ბიბლიოთეკა არ არსებობს: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-ko.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-ko.php new file mode 100644 index 00000000..9599fa68 --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-ko.php @@ -0,0 +1,26 @@ + + */ + +$PHPMAILER_LANG['authenticate'] = 'SMTP 오류: 인증할 수 없습니다.'; +$PHPMAILER_LANG['connect_host'] = 'SMTP 오류: SMTP 호스트에 접속할 수 없습니다.'; +$PHPMAILER_LANG['data_not_accepted'] = 'SMTP 오류: 데이터가 받아들여지지 않았습니다.'; +$PHPMAILER_LANG['empty_message'] = '메세지 내용이 없습니다'; +$PHPMAILER_LANG['encoding'] = '알 수 없는 인코딩: '; +$PHPMAILER_LANG['execute'] = '실행 불가: '; +$PHPMAILER_LANG['file_access'] = '파일 접근 불가: '; +$PHPMAILER_LANG['file_open'] = '파일 오류: 파일을 열 수 없습니다: '; +$PHPMAILER_LANG['from_failed'] = '다음 From 주소에서 오류가 발생했습니다: '; +$PHPMAILER_LANG['instantiate'] = 'mail 함수를 인스턴스화할 수 없습니다'; +$PHPMAILER_LANG['invalid_address'] = '잘못된 주소: '; +$PHPMAILER_LANG['mailer_not_supported'] = ' 메일러는 지원되지 않습니다.'; +$PHPMAILER_LANG['provide_address'] = '적어도 한 개 이상의 수신자 메일 주소를 제공해야 합니다.'; +$PHPMAILER_LANG['recipients_failed'] = 'SMTP 오류: 다음 수신자에서 오류가 발생했습니다: '; +$PHPMAILER_LANG['signing'] = '서명 오류: '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'SMTP 연결을 실패하였습니다.'; +$PHPMAILER_LANG['smtp_error'] = 'SMTP 서버 오류: '; +$PHPMAILER_LANG['variable_set'] = '변수 설정 및 초기화 불가: '; +$PHPMAILER_LANG['extension_missing'] = '확장자 없음: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-lt.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-lt.php new file mode 100644 index 00000000..1253a4fd --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-lt.php @@ -0,0 +1,26 @@ + + */ + +$PHPMAILER_LANG['authenticate'] = 'SMTP klaida: autentifikacija nepavyko.'; +$PHPMAILER_LANG['connect_host'] = 'SMTP klaida: nepavyksta prisijungti prie SMTP stoties.'; +$PHPMAILER_LANG['data_not_accepted'] = 'SMTP klaida: duomenys nepriimti.'; +$PHPMAILER_LANG['empty_message'] = 'Laiško turinys tuščias'; +$PHPMAILER_LANG['encoding'] = 'Neatpažinta koduotė: '; +$PHPMAILER_LANG['execute'] = 'Nepavyko įvykdyti komandos: '; +$PHPMAILER_LANG['file_access'] = 'Byla nepasiekiama: '; +$PHPMAILER_LANG['file_open'] = 'Bylos klaida: Nepavyksta atidaryti: '; +$PHPMAILER_LANG['from_failed'] = 'Neteisingas siuntėjo adresas: '; +$PHPMAILER_LANG['instantiate'] = 'Nepavyko paleisti mail funkcijos.'; +$PHPMAILER_LANG['invalid_address'] = 'Neteisingas adresas: '; +$PHPMAILER_LANG['mailer_not_supported'] = ' pašto stotis nepalaikoma.'; +$PHPMAILER_LANG['provide_address'] = 'Nurodykite bent vieną gavėjo adresą.'; +$PHPMAILER_LANG['recipients_failed'] = 'SMTP klaida: nepavyko išsiųsti šiems gavėjams: '; +$PHPMAILER_LANG['signing'] = 'Prisijungimo klaida: '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'SMTP susijungimo klaida'; +$PHPMAILER_LANG['smtp_error'] = 'SMTP stoties klaida: '; +$PHPMAILER_LANG['variable_set'] = 'Nepavyko priskirti reikšmės kintamajam: '; +//$PHPMAILER_LANG['extension_missing'] = 'Extension missing: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-lv.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-lv.php new file mode 100644 index 00000000..39bf9a19 --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-lv.php @@ -0,0 +1,26 @@ + + */ + +$PHPMAILER_LANG['authenticate'] = 'SMTP kļūda: Autorizācija neizdevās.'; +$PHPMAILER_LANG['connect_host'] = 'SMTP Kļūda: Nevar izveidot savienojumu ar SMTP serveri.'; +$PHPMAILER_LANG['data_not_accepted'] = 'SMTP Kļūda: Nepieņem informāciju.'; +$PHPMAILER_LANG['empty_message'] = 'Ziņojuma teksts ir tukšs'; +$PHPMAILER_LANG['encoding'] = 'Neatpazīts kodējums: '; +$PHPMAILER_LANG['execute'] = 'Neizdevās izpildīt komandu: '; +$PHPMAILER_LANG['file_access'] = 'Fails nav pieejams: '; +$PHPMAILER_LANG['file_open'] = 'Faila kļūda: Nevar atvērt failu: '; +$PHPMAILER_LANG['from_failed'] = 'Nepareiza sūtītāja adrese: '; +$PHPMAILER_LANG['instantiate'] = 'Nevar palaist sūtīšanas funkciju.'; +$PHPMAILER_LANG['invalid_address'] = 'Nepareiza adrese: '; +$PHPMAILER_LANG['mailer_not_supported'] = ' sūtītājs netiek atbalstīts.'; +$PHPMAILER_LANG['provide_address'] = 'Lūdzu, norādiet vismaz vienu adresātu.'; +$PHPMAILER_LANG['recipients_failed'] = 'SMTP kļūda: neizdevās nosūtīt šādiem saņēmējiem: '; +$PHPMAILER_LANG['signing'] = 'Autorizācijas kļūda: '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'SMTP savienojuma kļūda'; +$PHPMAILER_LANG['smtp_error'] = 'SMTP servera kļūda: '; +$PHPMAILER_LANG['variable_set'] = 'Nevar piešķirt mainīgā vērtību: '; +//$PHPMAILER_LANG['extension_missing'] = 'Extension missing: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-mg.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-mg.php new file mode 100644 index 00000000..f4c75630 --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-mg.php @@ -0,0 +1,25 @@ + + */ +$PHPMAILER_LANG['authenticate'] = 'Hadisoana SMTP: Tsy nahomby ny fanamarinana.'; +$PHPMAILER_LANG['connect_host'] = 'SMTP Error: Tsy afaka mampifandray amin\'ny mpampiantrano SMTP.'; +$PHPMAILER_LANG['data_not_accepted'] = 'SMTP diso: tsy voarakitra ny angona.'; +$PHPMAILER_LANG['empty_message'] = 'Tsy misy ny votoaty mailaka.'; +$PHPMAILER_LANG['encoding'] = 'Tsy fantatra encoding: '; +$PHPMAILER_LANG['execute'] = 'Tsy afaka manatanteraka ity baiko manaraka ity: '; +$PHPMAILER_LANG['file_access'] = 'Tsy nahomby ny fidirana amin\'ity rakitra ity: '; +$PHPMAILER_LANG['file_open'] = 'Hadisoana diso: Tsy afaka nanokatra ity file manaraka ity: '; +$PHPMAILER_LANG['from_failed'] = 'Ny adiresy iraka manaraka dia diso: '; +$PHPMAILER_LANG['instantiate'] = 'Tsy afaka nanomboka ny hetsika mail.'; +$PHPMAILER_LANG['invalid_address'] = 'Tsy mety ny adiresy: '; +$PHPMAILER_LANG['mailer_not_supported'] = ' mailer tsy manohana.'; +$PHPMAILER_LANG['provide_address'] = 'Alefaso azafady iray adiresy iray farafahakeliny.'; +$PHPMAILER_LANG['recipients_failed'] = 'SMTP Error: Tsy mety ireo mpanaraka ireto: '; +$PHPMAILER_LANG['signing'] = 'Error nandritra ny sonia:'; +$PHPMAILER_LANG['smtp_connect_failed'] = 'Tsy nahomby ny fifandraisana tamin\'ny server SMTP.'; +$PHPMAILER_LANG['smtp_error'] = 'Fahadisoana tamin\'ny server SMTP: '; +$PHPMAILER_LANG['variable_set'] = 'Tsy azo atao ny mametraka na mamerina ny variable: '; +$PHPMAILER_LANG['extension_missing'] = 'Tsy hita ny ampahany: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-ms.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-ms.php new file mode 100644 index 00000000..f12a6ad4 --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-ms.php @@ -0,0 +1,26 @@ + + */ + +$PHPMAILER_LANG['authenticate'] = 'Ralat SMTP: Tidak dapat pengesahan.'; +$PHPMAILER_LANG['connect_host'] = 'Ralat SMTP: Tidak dapat menghubungi hos pelayan SMTP.'; +$PHPMAILER_LANG['data_not_accepted'] = 'Ralat SMTP: Data tidak diterima oleh pelayan.'; +$PHPMAILER_LANG['empty_message'] = 'Tiada isi untuk mesej'; +$PHPMAILER_LANG['encoding'] = 'Pengekodan tidak diketahui: '; +$PHPMAILER_LANG['execute'] = 'Tidak dapat melaksanakan: '; +$PHPMAILER_LANG['file_access'] = 'Tidak dapat mengakses fail: '; +$PHPMAILER_LANG['file_open'] = 'Ralat Fail: Tidak dapat membuka fail: '; +$PHPMAILER_LANG['from_failed'] = 'Berikut merupakan ralat dari alamat e-mel: '; +$PHPMAILER_LANG['instantiate'] = 'Tidak dapat memberi contoh fungsi e-mel.'; +$PHPMAILER_LANG['invalid_address'] = 'Alamat emel tidak sah: '; +$PHPMAILER_LANG['mailer_not_supported'] = ' jenis penghantar emel tidak disokong.'; +$PHPMAILER_LANG['provide_address'] = 'Anda perlu menyediakan sekurang-kurangnya satu alamat e-mel penerima.'; +$PHPMAILER_LANG['recipients_failed'] = 'Ralat SMTP: Penerima e-mel berikut telah gagal: '; +$PHPMAILER_LANG['signing'] = 'Ralat pada tanda tangan: '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'SMTP Connect() telah gagal.'; +$PHPMAILER_LANG['smtp_error'] = 'Ralat pada pelayan SMTP: '; +$PHPMAILER_LANG['variable_set'] = 'Tidak boleh menetapkan atau menetapkan semula pembolehubah: '; +$PHPMAILER_LANG['extension_missing'] = 'Sambungan hilang: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-nb.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-nb.php new file mode 100644 index 00000000..97403e73 --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-nb.php @@ -0,0 +1,25 @@ + + */ + +$PHPMAILER_LANG['authenticate'] = 'SMTP-fout: authenticatie mislukt.'; +$PHPMAILER_LANG['connect_host'] = 'SMTP-fout: kon niet verbinden met SMTP-host.'; +$PHPMAILER_LANG['data_not_accepted'] = 'SMTP-fout: data niet geaccepteerd.'; +$PHPMAILER_LANG['empty_message'] = 'Berichttekst is leeg'; +$PHPMAILER_LANG['encoding'] = 'Onbekende codering: '; +$PHPMAILER_LANG['execute'] = 'Kon niet uitvoeren: '; +$PHPMAILER_LANG['file_access'] = 'Kreeg geen toegang tot bestand: '; +$PHPMAILER_LANG['file_open'] = 'Bestandsfout: kon bestand niet openen: '; +$PHPMAILER_LANG['from_failed'] = 'Het volgende afzendersadres is mislukt: '; +$PHPMAILER_LANG['instantiate'] = 'Kon mailfunctie niet initialiseren.'; +$PHPMAILER_LANG['invalid_address'] = 'Ongeldig adres: '; +$PHPMAILER_LANG['invalid_hostentry'] = 'Ongeldige hostentry: '; +$PHPMAILER_LANG['invalid_host'] = 'Ongeldige host: '; +$PHPMAILER_LANG['mailer_not_supported'] = ' mailer wordt niet ondersteund.'; +$PHPMAILER_LANG['provide_address'] = 'Er moet minstens één ontvanger worden opgegeven.'; +$PHPMAILER_LANG['recipients_failed'] = 'SMTP-fout: de volgende ontvangers zijn mislukt: '; +$PHPMAILER_LANG['signing'] = 'Signeerfout: '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'SMTP Verbinding mislukt.'; +$PHPMAILER_LANG['smtp_error'] = 'SMTP-serverfout: '; +$PHPMAILER_LANG['variable_set'] = 'Kan de volgende variabele niet instellen of resetten: '; +$PHPMAILER_LANG['extension_missing'] = 'Extensie afwezig: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-pl.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-pl.php new file mode 100644 index 00000000..3da0dee9 --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-pl.php @@ -0,0 +1,26 @@ + + */ + +$PHPMAILER_LANG['authenticate'] = 'Erro do SMTP: Não foi possível realizar a autenticação.'; +$PHPMAILER_LANG['connect_host'] = 'Erro do SMTP: Não foi possível realizar ligação com o servidor SMTP.'; +$PHPMAILER_LANG['data_not_accepted'] = 'Erro do SMTP: Os dados foram rejeitados.'; +$PHPMAILER_LANG['empty_message'] = 'A mensagem no e-mail está vazia.'; +$PHPMAILER_LANG['encoding'] = 'Codificação desconhecida: '; +$PHPMAILER_LANG['execute'] = 'Não foi possível executar: '; +$PHPMAILER_LANG['file_access'] = 'Não foi possível aceder o ficheiro: '; +$PHPMAILER_LANG['file_open'] = 'Abertura do ficheiro: Não foi possível abrir o ficheiro: '; +$PHPMAILER_LANG['from_failed'] = 'Ocorreram falhas nos endereços dos seguintes remententes: '; +$PHPMAILER_LANG['instantiate'] = 'Não foi possível iniciar uma instância da função mail.'; +$PHPMAILER_LANG['invalid_address'] = 'Não foi enviado nenhum e-mail para o endereço de e-mail inválido: '; +$PHPMAILER_LANG['mailer_not_supported'] = ' mailer não é suportado.'; +$PHPMAILER_LANG['provide_address'] = 'Tem de fornecer pelo menos um endereço como destinatário do e-mail.'; +$PHPMAILER_LANG['recipients_failed'] = 'Erro do SMTP: O endereço do seguinte destinatário falhou: '; +$PHPMAILER_LANG['signing'] = 'Erro ao assinar: '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'SMTP Connect() falhou.'; +$PHPMAILER_LANG['smtp_error'] = 'Erro de servidor SMTP: '; +$PHPMAILER_LANG['variable_set'] = 'Não foi possível definir ou redefinir a variável: '; +$PHPMAILER_LANG['extension_missing'] = 'Extensão em falta: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-pt_br.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-pt_br.php new file mode 100644 index 00000000..62d692d4 --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-pt_br.php @@ -0,0 +1,29 @@ + + * @author Lucas Guimarães + * @author Phelipe Alves + * @author Fabio Beneditto + */ + +$PHPMAILER_LANG['authenticate'] = 'Erro de SMTP: Não foi possível autenticar.'; +$PHPMAILER_LANG['connect_host'] = 'Erro de SMTP: Não foi possível conectar ao servidor SMTP.'; +$PHPMAILER_LANG['data_not_accepted'] = 'Erro de SMTP: Dados rejeitados.'; +$PHPMAILER_LANG['empty_message'] = 'Mensagem vazia'; +$PHPMAILER_LANG['encoding'] = 'Codificação desconhecida: '; +$PHPMAILER_LANG['execute'] = 'Não foi possível executar: '; +$PHPMAILER_LANG['file_access'] = 'Não foi possível acessar o arquivo: '; +$PHPMAILER_LANG['file_open'] = 'Erro de Arquivo: Não foi possível abrir o arquivo: '; +$PHPMAILER_LANG['from_failed'] = 'Os seguintes remetentes falharam: '; +$PHPMAILER_LANG['instantiate'] = 'Não foi possível instanciar a função mail.'; +$PHPMAILER_LANG['invalid_address'] = 'Endereço de e-mail inválido: '; +$PHPMAILER_LANG['mailer_not_supported'] = ' mailer não é suportado.'; +$PHPMAILER_LANG['provide_address'] = 'Você deve informar pelo menos um destinatário.'; +$PHPMAILER_LANG['recipients_failed'] = 'Erro de SMTP: Os seguintes destinatários falharam: '; +$PHPMAILER_LANG['signing'] = 'Erro de Assinatura: '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'SMTP Connect() falhou.'; +$PHPMAILER_LANG['smtp_error'] = 'Erro de servidor SMTP: '; +$PHPMAILER_LANG['variable_set'] = 'Não foi possível definir ou redefinir a variável: '; +$PHPMAILER_LANG['extension_missing'] = 'Extensão não existe: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-ro.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-ro.php new file mode 100644 index 00000000..fa100eaa --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-ro.php @@ -0,0 +1,26 @@ + + */ + +$PHPMAILER_LANG['authenticate'] = 'Eroare SMTP: Autentificarea a eșuat.'; +$PHPMAILER_LANG['connect_host'] = 'Eroare SMTP: Conectarea la serverul SMTP a eșuat.'; +$PHPMAILER_LANG['data_not_accepted'] = 'Eroare SMTP: Datele nu au fost acceptate.'; +$PHPMAILER_LANG['empty_message'] = 'Mesajul este gol.'; +$PHPMAILER_LANG['encoding'] = 'Encodare necunoscută: '; +$PHPMAILER_LANG['execute'] = 'Nu se poate executa următoarea comandă: '; +$PHPMAILER_LANG['file_access'] = 'Nu se poate accesa următorul fișier: '; +$PHPMAILER_LANG['file_open'] = 'Eroare fișier: Nu se poate deschide următorul fișier: '; +$PHPMAILER_LANG['from_failed'] = 'Următoarele adrese From au dat eroare: '; +$PHPMAILER_LANG['instantiate'] = 'Funcția mail nu a putut fi inițializată.'; +$PHPMAILER_LANG['invalid_address'] = 'Adresa de email nu este validă: '; +$PHPMAILER_LANG['mailer_not_supported'] = ' mailer nu este suportat.'; +$PHPMAILER_LANG['provide_address'] = 'Trebuie să adăugați cel puțin o adresă de email.'; +$PHPMAILER_LANG['recipients_failed'] = 'Eroare SMTP: Următoarele adrese de email au eșuat: '; +$PHPMAILER_LANG['signing'] = 'A aparut o problemă la semnarea emailului. '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'Conectarea la serverul SMTP a eșuat.'; +$PHPMAILER_LANG['smtp_error'] = 'Eroare server SMTP: '; +$PHPMAILER_LANG['variable_set'] = 'Nu se poate seta/reseta variabila. '; +$PHPMAILER_LANG['extension_missing'] = 'Lipsește extensia: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-ru.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-ru.php new file mode 100644 index 00000000..720e9a11 --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-ru.php @@ -0,0 +1,27 @@ + + * @author Foster Snowhill + */ + +$PHPMAILER_LANG['authenticate'] = 'Ошибка SMTP: ошибка авторизации.'; +$PHPMAILER_LANG['connect_host'] = 'Ошибка SMTP: не удается подключиться к SMTP-серверу.'; +$PHPMAILER_LANG['data_not_accepted'] = 'Ошибка SMTP: данные не приняты.'; +$PHPMAILER_LANG['encoding'] = 'Неизвестная кодировка: '; +$PHPMAILER_LANG['execute'] = 'Невозможно выполнить команду: '; +$PHPMAILER_LANG['file_access'] = 'Нет доступа к файлу: '; +$PHPMAILER_LANG['file_open'] = 'Файловая ошибка: не удаётся открыть файл: '; +$PHPMAILER_LANG['from_failed'] = 'Неверный адрес отправителя: '; +$PHPMAILER_LANG['instantiate'] = 'Невозможно запустить функцию mail().'; +$PHPMAILER_LANG['provide_address'] = 'Пожалуйста, введите хотя бы один email-адрес получателя.'; +$PHPMAILER_LANG['mailer_not_supported'] = ' — почтовый сервер не поддерживается.'; +$PHPMAILER_LANG['recipients_failed'] = 'Ошибка SMTP: не удалась отправка таким адресатам: '; +$PHPMAILER_LANG['empty_message'] = 'Пустое сообщение'; +$PHPMAILER_LANG['invalid_address'] = 'Не отправлено из-за неправильного формата email-адреса: '; +$PHPMAILER_LANG['signing'] = 'Ошибка подписи: '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'Ошибка соединения с SMTP-сервером'; +$PHPMAILER_LANG['smtp_error'] = 'Ошибка SMTP-сервера: '; +$PHPMAILER_LANG['variable_set'] = 'Невозможно установить или сбросить переменную: '; +$PHPMAILER_LANG['extension_missing'] = 'Расширение отсутствует: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-sk.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-sk.php new file mode 100644 index 00000000..69cfb0fc --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-sk.php @@ -0,0 +1,27 @@ + + * @author Peter Orlický + */ + +$PHPMAILER_LANG['authenticate'] = 'SMTP Error: Chyba autentifikácie.'; +$PHPMAILER_LANG['connect_host'] = 'SMTP Error: Nebolo možné nadviazať spojenie so SMTP serverom.'; +$PHPMAILER_LANG['data_not_accepted'] = 'SMTP Error: Dáta neboli prijaté'; +$PHPMAILER_LANG['empty_message'] = 'Prázdne telo správy.'; +$PHPMAILER_LANG['encoding'] = 'Neznáme kódovanie: '; +$PHPMAILER_LANG['execute'] = 'Nedá sa vykonať: '; +$PHPMAILER_LANG['file_access'] = 'Súbor nebol nájdený: '; +$PHPMAILER_LANG['file_open'] = 'File Error: Súbor sa otvoriť pre čítanie: '; +$PHPMAILER_LANG['from_failed'] = 'Následujúca adresa From je nesprávna: '; +$PHPMAILER_LANG['instantiate'] = 'Nedá sa vytvoriť inštancia emailovej funkcie.'; +$PHPMAILER_LANG['invalid_address'] = 'Neodoslané, emailová adresa je nesprávna: '; +$PHPMAILER_LANG['mailer_not_supported'] = ' emailový klient nieje podporovaný.'; +$PHPMAILER_LANG['provide_address'] = 'Musíte zadať aspoň jednu emailovú adresu príjemcu.'; +$PHPMAILER_LANG['recipients_failed'] = 'SMTP Error: Adresy príjemcov niesu správne '; +$PHPMAILER_LANG['signing'] = 'Chyba prihlasovania: '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'SMTP Connect() zlyhalo.'; +$PHPMAILER_LANG['smtp_error'] = 'SMTP chyba serveru: '; +$PHPMAILER_LANG['variable_set'] = 'Nemožno nastaviť alebo resetovať premennú: '; +$PHPMAILER_LANG['extension_missing'] = 'Chýba rozšírenie: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-sl.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-sl.php new file mode 100644 index 00000000..1e3cb7fa --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-sl.php @@ -0,0 +1,27 @@ + + * @author Filip Š + */ + +$PHPMAILER_LANG['authenticate'] = 'SMTP napaka: Avtentikacija ni uspela.'; +$PHPMAILER_LANG['connect_host'] = 'SMTP napaka: Vzpostavljanje povezave s SMTP gostiteljem ni uspelo.'; +$PHPMAILER_LANG['data_not_accepted'] = 'SMTP napaka: Strežnik zavrača podatke.'; +$PHPMAILER_LANG['empty_message'] = 'E-poštno sporočilo nima vsebine.'; +$PHPMAILER_LANG['encoding'] = 'Nepoznan tip kodiranja: '; +$PHPMAILER_LANG['execute'] = 'Operacija ni uspela: '; +$PHPMAILER_LANG['file_access'] = 'Nimam dostopa do datoteke: '; +$PHPMAILER_LANG['file_open'] = 'Ne morem odpreti datoteke: '; +$PHPMAILER_LANG['from_failed'] = 'Neveljaven e-naslov pošiljatelja: '; +$PHPMAILER_LANG['instantiate'] = 'Ne morem inicializirati mail funkcije.'; +$PHPMAILER_LANG['invalid_address'] = 'E-poštno sporočilo ni bilo poslano. E-naslov je neveljaven: '; +$PHPMAILER_LANG['mailer_not_supported'] = ' mailer ni podprt.'; +$PHPMAILER_LANG['provide_address'] = 'Prosim vnesite vsaj enega naslovnika.'; +$PHPMAILER_LANG['recipients_failed'] = 'SMTP napaka: Sledeči naslovniki so neveljavni: '; +$PHPMAILER_LANG['signing'] = 'Napaka pri podpisovanju: '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'Ne morem vzpostaviti povezave s SMTP strežnikom.'; +$PHPMAILER_LANG['smtp_error'] = 'Napaka SMTP strežnika: '; +$PHPMAILER_LANG['variable_set'] = 'Ne morem nastaviti oz. ponastaviti spremenljivke: '; +$PHPMAILER_LANG['extension_missing'] = 'Manjkajoča razširitev: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-sr.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-sr.php new file mode 100644 index 00000000..34c1e182 --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-sr.php @@ -0,0 +1,27 @@ + + * @author Miloš Milanović + */ + +$PHPMAILER_LANG['authenticate'] = 'SMTP грешка: аутентификација није успела.'; +$PHPMAILER_LANG['connect_host'] = 'SMTP грешка: повезивање са SMTP сервером није успело.'; +$PHPMAILER_LANG['data_not_accepted'] = 'SMTP грешка: подаци нису прихваћени.'; +$PHPMAILER_LANG['empty_message'] = 'Садржај поруке је празан.'; +$PHPMAILER_LANG['encoding'] = 'Непознато кодирање: '; +$PHPMAILER_LANG['execute'] = 'Није могуће извршити наредбу: '; +$PHPMAILER_LANG['file_access'] = 'Није могуће приступити датотеци: '; +$PHPMAILER_LANG['file_open'] = 'Није могуће отворити датотеку: '; +$PHPMAILER_LANG['from_failed'] = 'SMTP грешка: слање са следећих адреса није успело: '; +$PHPMAILER_LANG['recipients_failed'] = 'SMTP грешка: слање на следеће адресе није успело: '; +$PHPMAILER_LANG['instantiate'] = 'Није могуће покренути mail функцију.'; +$PHPMAILER_LANG['invalid_address'] = 'Порука није послата. Неисправна адреса: '; +$PHPMAILER_LANG['mailer_not_supported'] = ' мејлер није подржан.'; +$PHPMAILER_LANG['provide_address'] = 'Дефинишите бар једну адресу примаоца.'; +$PHPMAILER_LANG['signing'] = 'Грешка приликом пријаве: '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'Повезивање са SMTP сервером није успело.'; +$PHPMAILER_LANG['smtp_error'] = 'Грешка SMTP сервера: '; +$PHPMAILER_LANG['variable_set'] = 'Није могуће задати нити ресетовати променљиву: '; +$PHPMAILER_LANG['extension_missing'] = 'Недостаје проширење: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-sv.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-sv.php new file mode 100644 index 00000000..4408e63e --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-sv.php @@ -0,0 +1,26 @@ + + */ + +$PHPMAILER_LANG['authenticate'] = 'SMTP fel: Kunde inte autentisera.'; +$PHPMAILER_LANG['connect_host'] = 'SMTP fel: Kunde inte ansluta till SMTP-server.'; +$PHPMAILER_LANG['data_not_accepted'] = 'SMTP fel: Data accepterades inte.'; +//$PHPMAILER_LANG['empty_message'] = 'Message body empty'; +$PHPMAILER_LANG['encoding'] = 'Okänt encode-format: '; +$PHPMAILER_LANG['execute'] = 'Kunde inte köra: '; +$PHPMAILER_LANG['file_access'] = 'Ingen åtkomst till fil: '; +$PHPMAILER_LANG['file_open'] = 'Fil fel: Kunde inte öppna fil: '; +$PHPMAILER_LANG['from_failed'] = 'Följande avsändaradress är felaktig: '; +$PHPMAILER_LANG['instantiate'] = 'Kunde inte initiera e-postfunktion.'; +$PHPMAILER_LANG['invalid_address'] = 'Felaktig adress: '; +$PHPMAILER_LANG['provide_address'] = 'Du måste ange minst en mottagares e-postadress.'; +$PHPMAILER_LANG['mailer_not_supported'] = ' mailer stöds inte.'; +$PHPMAILER_LANG['recipients_failed'] = 'SMTP fel: Följande mottagare är felaktig: '; +$PHPMAILER_LANG['signing'] = 'Signerings fel: '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'SMTP Connect() misslyckades.'; +$PHPMAILER_LANG['smtp_error'] = 'SMTP server fel: '; +$PHPMAILER_LANG['variable_set'] = 'Kunde inte definiera eller återställa variabel: '; +$PHPMAILER_LANG['extension_missing'] = 'Tillägg ej tillgängligt: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-tl.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-tl.php new file mode 100644 index 00000000..ed51d4c6 --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-tl.php @@ -0,0 +1,27 @@ + + */ + +$PHPMAILER_LANG['authenticate'] = 'SMTP Error: Hindi mapatotohanan.'; +$PHPMAILER_LANG['connect_host'] = 'SMTP Error: Hindi makakonekta sa SMTP host.'; +$PHPMAILER_LANG['data_not_accepted'] = 'SMTP Error: Ang datos ay hindi maaaring matatanggap.'; +$PHPMAILER_LANG['empty_message'] = 'Walang laman ang mensahe'; +$PHPMAILER_LANG['encoding'] = 'Hindi alam ang encoding: '; +$PHPMAILER_LANG['execute'] = 'Hindi maisasagawa: '; +$PHPMAILER_LANG['file_access'] = 'Hindi ma-access ang file: '; +$PHPMAILER_LANG['file_open'] = 'Hindi mabuksan ang file: '; +$PHPMAILER_LANG['from_failed'] = 'Ang sumusunod na address ay nabigo: '; +$PHPMAILER_LANG['instantiate'] = 'Hindi maaaring magbigay ng institusyon ang mail'; +$PHPMAILER_LANG['invalid_address'] = 'Hindi wasto ang address na naibigay: '; +$PHPMAILER_LANG['mailer_not_supported'] = 'Ang mailer ay hindi suportado'; +$PHPMAILER_LANG['provide_address'] = 'Kailangan mong magbigay ng kahit isang email address na tatanggap'; +$PHPMAILER_LANG['recipients_failed'] = 'SMTP Error: Ang mga sumusunod na tatanggap ay nabigo: '; +$PHPMAILER_LANG['signing'] = 'Hindi ma-sign'; +$PHPMAILER_LANG['smtp_connect_failed'] = 'Ang SMTP connect() ay nabigo'; +$PHPMAILER_LANG['smtp_error'] = 'Ang server ng SMTP ay nabigo'; +$PHPMAILER_LANG['variable_set'] = 'Hindi matatakda ang mga variables: '; +$PHPMAILER_LANG['extension_missing'] = 'Nawawala ang extension'; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-tr.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-tr.php new file mode 100644 index 00000000..cfe8eaae --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-tr.php @@ -0,0 +1,30 @@ + + * @fixed by Boris Yurchenko + */ + +$PHPMAILER_LANG['authenticate'] = 'Помилка SMTP: помилка авторизації.'; +$PHPMAILER_LANG['connect_host'] = 'Помилка SMTP: не вдається під\'єднатися до SMTP-серверу.'; +$PHPMAILER_LANG['data_not_accepted'] = 'Помилка SMTP: дані не прийнято.'; +$PHPMAILER_LANG['encoding'] = 'Невідоме кодування: '; +$PHPMAILER_LANG['execute'] = 'Неможливо виконати команду: '; +$PHPMAILER_LANG['file_access'] = 'Немає доступу до файлу: '; +$PHPMAILER_LANG['file_open'] = 'Помилка файлової системи: не вдається відкрити файл: '; +$PHPMAILER_LANG['from_failed'] = 'Невірна адреса відправника: '; +$PHPMAILER_LANG['instantiate'] = 'Неможливо запустити функцію mail().'; +$PHPMAILER_LANG['provide_address'] = 'Будь-ласка, введіть хоча б одну email-адресу отримувача.'; +$PHPMAILER_LANG['mailer_not_supported'] = ' - поштовий сервер не підтримується.'; +$PHPMAILER_LANG['recipients_failed'] = 'Помилка SMTP: не вдалося відправлення для таких отримувачів: '; +$PHPMAILER_LANG['empty_message'] = 'Пусте повідомлення'; +$PHPMAILER_LANG['invalid_address'] = 'Не відправлено через невірний формат email-адреси: '; +$PHPMAILER_LANG['signing'] = 'Помилка підпису: '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'Помилка з\'єднання з SMTP-сервером'; +$PHPMAILER_LANG['smtp_error'] = 'Помилка SMTP-сервера: '; +$PHPMAILER_LANG['variable_set'] = 'Неможливо встановити або скинути змінну: '; +$PHPMAILER_LANG['extension_missing'] = 'Розширення відсутнє: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-vi.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-vi.php new file mode 100644 index 00000000..c60dadeb --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-vi.php @@ -0,0 +1,26 @@ + + */ + +$PHPMAILER_LANG['authenticate'] = 'Lỗi SMTP: Không thể xác thực.'; +$PHPMAILER_LANG['connect_host'] = 'Lỗi SMTP: Không thể kết nối máy chủ SMTP.'; +$PHPMAILER_LANG['data_not_accepted'] = 'Lỗi SMTP: Dữ liệu không được chấp nhận.'; +$PHPMAILER_LANG['empty_message'] = 'Không có nội dung'; +$PHPMAILER_LANG['encoding'] = 'Mã hóa không xác định: '; +$PHPMAILER_LANG['execute'] = 'Không thực hiện được: '; +$PHPMAILER_LANG['file_access'] = 'Không thể truy cập tệp tin '; +$PHPMAILER_LANG['file_open'] = 'Lỗi Tập tin: Không thể mở tệp tin: '; +$PHPMAILER_LANG['from_failed'] = 'Lỗi địa chỉ gửi đi: '; +$PHPMAILER_LANG['instantiate'] = 'Không dùng được các hàm gửi thư.'; +$PHPMAILER_LANG['invalid_address'] = 'Đại chỉ emai không đúng: '; +$PHPMAILER_LANG['mailer_not_supported'] = ' trình gửi thư không được hỗ trợ.'; +$PHPMAILER_LANG['provide_address'] = 'Bạn phải cung cấp ít nhất một địa chỉ người nhận.'; +$PHPMAILER_LANG['recipients_failed'] = 'Lỗi SMTP: lỗi địa chỉ người nhận: '; +$PHPMAILER_LANG['signing'] = 'Lỗi đăng nhập: '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'Lỗi kết nối với SMTP'; +$PHPMAILER_LANG['smtp_error'] = 'Lỗi máy chủ smtp '; +$PHPMAILER_LANG['variable_set'] = 'Không thể thiết lập hoặc thiết lập lại biến: '; +//$PHPMAILER_LANG['extension_missing'] = 'Extension missing: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-zh.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-zh.php new file mode 100644 index 00000000..3e9e358c --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-zh.php @@ -0,0 +1,28 @@ + + * @author Peter Dave Hello <@PeterDaveHello/> + * @author Jason Chiang + */ + +$PHPMAILER_LANG['authenticate'] = 'SMTP 錯誤：登入失敗。'; +$PHPMAILER_LANG['connect_host'] = 'SMTP 錯誤：無法連線到 SMTP 主機。'; +$PHPMAILER_LANG['data_not_accepted'] = 'SMTP 錯誤：無法接受的資料。'; +$PHPMAILER_LANG['empty_message'] = '郵件內容為空'; +$PHPMAILER_LANG['encoding'] = '未知編碼: '; +$PHPMAILER_LANG['execute'] = '無法執行：'; +$PHPMAILER_LANG['file_access'] = '無法存取檔案：'; +$PHPMAILER_LANG['file_open'] = '檔案錯誤：無法開啟檔案：'; +$PHPMAILER_LANG['from_failed'] = '發送地址錯誤：'; +$PHPMAILER_LANG['instantiate'] = '未知函數呼叫。'; +$PHPMAILER_LANG['invalid_address'] = '因為電子郵件地址無效，無法傳送: '; +$PHPMAILER_LANG['mailer_not_supported'] = '不支援的發信客戶端。'; +$PHPMAILER_LANG['provide_address'] = '必須提供至少一個收件人地址。'; +$PHPMAILER_LANG['recipients_failed'] = 'SMTP 錯誤：以下收件人地址錯誤：'; +$PHPMAILER_LANG['signing'] = '電子簽章錯誤: '; +$PHPMAILER_LANG['smtp_connect_failed'] = 'SMTP 連線失敗'; +$PHPMAILER_LANG['smtp_error'] = 'SMTP 伺服器錯誤: '; +$PHPMAILER_LANG['variable_set'] = '無法設定或重設變數: '; +$PHPMAILER_LANG['extension_missing'] = '遺失模組 Extension: '; diff --git a/vendor/phpmailer/phpmailer/language/phpmailer.lang-zh_cn.php b/vendor/phpmailer/phpmailer/language/phpmailer.lang-zh_cn.php new file mode 100644 index 00000000..37537802 --- /dev/null +++ b/vendor/phpmailer/phpmailer/language/phpmailer.lang-zh_cn.php @@ -0,0 +1,28 @@ + + * @author young + * @author Teddysun + */ + +$PHPMAILER_LANG['authenticate'] = 'SMTP 错误：登录失败。'; +$PHPMAILER_LANG['connect_host'] = 'SMTP 错误：无法连接到 SMTP 主机。'; +$PHPMAILER_LANG['data_not_accepted'] = 'SMTP 错误：数据不被接受。'; +$PHPMAILER_LANG['empty_message'] = '邮件正文为空。'; +$PHPMAILER_LANG['encoding'] = '未知编码：'; +$PHPMAILER_LANG['execute'] = '无法执行：'; +$PHPMAILER_LANG['file_access'] = '无法访问文件：'; +$PHPMAILER_LANG['file_open'] = '文件错误：无法打开文件：'; +$PHPMAILER_LANG['from_failed'] = '发送地址错误：'; +$PHPMAILER_LANG['instantiate'] = '未知函数调用。'; +$PHPMAILER_LANG['invalid_address'] = '发送失败，电子邮箱地址是无效的：'; +$PHPMAILER_LANG['mailer_not_supported'] = '发信客户端不被支持。'; +$PHPMAILER_LANG['provide_address'] = '必须提供至少一个收件人地址。'; +$PHPMAILER_LANG['recipients_failed'] = 'SMTP 错误：收件人地址错误：'; +$PHPMAILER_LANG['signing'] = '登录失败：'; +$PHPMAILER_LANG['smtp_connect_failed'] = 'SMTP服务器连接失败。'; +$PHPMAILER_LANG['smtp_error'] = 'SMTP服务器出错：'; +$PHPMAILER_LANG['variable_set'] = '无法设置或重置变量：'; +$PHPMAILER_LANG['extension_missing'] = '丢失模块 Extension：'; diff --git a/vendor/phpmailer/phpmailer/src/Exception.php b/vendor/phpmailer/phpmailer/src/Exception.php new file mode 100644 index 00000000..b1e552f5 --- /dev/null +++ b/vendor/phpmailer/phpmailer/src/Exception.php @@ -0,0 +1,39 @@ + + * @author Jim Jagielski (jimjag) + * @author Andy Prevost (codeworxtech) + * @author Brent R. Matzelle (original founder) + * @copyright 2012 - 2017 Marcus Bointon + * @copyright 2010 - 2012 Jim Jagielski + * @copyright 2004 - 2009 Andy Prevost + * @license http://www.gnu.org/copyleft/lesser.html GNU Lesser General Public License + * @note This program is distributed in the hope that it will be useful - WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. + */ + +namespace PHPMailer\PHPMailer; + +/** + * PHPMailer exception handler. + * + * @author Marcus Bointon + */ +class Exception extends \Exception +{ + /** + * Prettify error message output. + * + * @return string + */ + public function errorMessage() + { + return '' . htmlspecialchars($this->getMessage()) . "
\n"; + } +} diff --git a/vendor/phpmailer/phpmailer/src/OAuth.php b/vendor/phpmailer/phpmailer/src/OAuth.php new file mode 100644 index 00000000..0271963c --- /dev/null +++ b/vendor/phpmailer/phpmailer/src/OAuth.php @@ -0,0 +1,138 @@ + + * @author Jim Jagielski (jimjag) + * @author Andy Prevost (codeworxtech) + * @author Brent R. Matzelle (original founder) + * @copyright 2012 - 2015 Marcus Bointon + * @copyright 2010 - 2012 Jim Jagielski + * @copyright 2004 - 2009 Andy Prevost + * @license http://www.gnu.org/copyleft/lesser.html GNU Lesser General Public License + * @note This program is distributed in the hope that it will be useful - WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. + */ + +namespace PHPMailer\PHPMailer; + +use League\OAuth2\Client\Grant\RefreshToken; +use League\OAuth2\Client\Provider\AbstractProvider; +use League\OAuth2\Client\Token\AccessToken; + +/** + * OAuth - OAuth2 authentication wrapper class. + * Uses the oauth2-client package from the League of Extraordinary Packages. + * + * @see http://oauth2-client.thephpleague.com + * + * @author Marcus Bointon (Synchro/coolbru) + */ +class OAuth +{ + /** + * An instance of the League OAuth Client Provider. + * + * @var AbstractProvider + */ + protected $provider; + + /** + * The current OAuth access token. + * + * @var AccessToken + */ + protected $oauthToken; + + /** + * The user's email address, usually used as the login ID + * and also the from address when sending email. + * + * @var string + */ + protected $oauthUserEmail = ''; + + /** + * The client secret, generated in the app definition of the service you're connecting to. + * + * @var string + */ + protected $oauthClientSecret = ''; + + /** + * The client ID, generated in the app definition of the service you're connecting to. + * + * @var string + */ + protected $oauthClientId = ''; + + /** + * The refresh token, used to obtain new AccessTokens. + * + * @var string + */ + protected $oauthRefreshToken = ''; + + /** + * OAuth constructor. + * + * @param array $options Associative array containing + * `provider`, `userName`, `clientSecret`, `clientId` and `refreshToken` elements + */ + public function __construct($options) + { + $this->provider = $options['provider']; + $this->oauthUserEmail = $options['userName']; + $this->oauthClientSecret = $options['clientSecret']; + $this->oauthClientId = $options['clientId']; + $this->oauthRefreshToken = $options['refreshToken']; + } + + /** + * Get a new RefreshToken. + * + * @return RefreshToken + */ + protected function getGrant() + { + return new RefreshToken(); + } + + /** + * Get a new AccessToken. + * + * @return AccessToken + */ + protected function getToken() + { + return $this->provider->getAccessToken( + $this->getGrant(), + ['refresh_token' => $this->oauthRefreshToken] + ); + } + + /** + * Generate a base64-encoded OAuth token. + * + * @return string + */ + public function getOauth64() + { + // Get a new token if it's not available or has expired + if (null === $this->oauthToken || $this->oauthToken->hasExpired()) { + $this->oauthToken = $this->getToken(); + } + + return base64_encode( + 'user=' . + $this->oauthUserEmail . + "\001auth=Bearer " . + $this->oauthToken . + "\001\001" + ); + } +} diff --git a/vendor/phpmailer/phpmailer/src/PHPMailer.php b/vendor/phpmailer/phpmailer/src/PHPMailer.php new file mode 100644 index 00000000..127f2b79 --- /dev/null +++ b/vendor/phpmailer/phpmailer/src/PHPMailer.php @@ -0,0 +1,4778 @@ + + * @author Jim Jagielski (jimjag) + * @author Andy Prevost (codeworxtech) + * @author Brent R. Matzelle (original founder) + * @copyright 2012 - 2019 Marcus Bointon + * @copyright 2010 - 2012 Jim Jagielski + * @copyright 2004 - 2009 Andy Prevost + * @license http://www.gnu.org/copyleft/lesser.html GNU Lesser General Public License + * @note This program is distributed in the hope that it will be useful - WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. + */ + +namespace PHPMailer\PHPMailer; + +/** + * PHPMailer - PHP email creation and transport class. + * + * @author Marcus Bointon (Synchro/coolbru) + * @author Jim Jagielski (jimjag) + * @author Andy Prevost (codeworxtech) + * @author Brent R. Matzelle (original founder) + */ +class PHPMailer +{ + const CHARSET_ASCII = 'us-ascii'; + const CHARSET_ISO88591 = 'iso-8859-1'; + const CHARSET_UTF8 = 'utf-8'; + + const CONTENT_TYPE_PLAINTEXT = 'text/plain'; + const CONTENT_TYPE_TEXT_CALENDAR = 'text/calendar'; + const CONTENT_TYPE_TEXT_HTML = 'text/html'; + const CONTENT_TYPE_MULTIPART_ALTERNATIVE = 'multipart/alternative'; + const CONTENT_TYPE_MULTIPART_MIXED = 'multipart/mixed'; + const CONTENT_TYPE_MULTIPART_RELATED = 'multipart/related'; + + const ENCODING_7BIT = '7bit'; + const ENCODING_8BIT = '8bit'; + const ENCODING_BASE64 = 'base64'; + const ENCODING_BINARY = 'binary'; + const ENCODING_QUOTED_PRINTABLE = 'quoted-printable'; + + const ENCRYPTION_STARTTLS = 'tls'; + const ENCRYPTION_SMTPS = 'ssl'; + + const ICAL_METHOD_REQUEST = 'REQUEST'; + const ICAL_METHOD_PUBLISH = 'PUBLISH'; + const ICAL_METHOD_REPLY = 'REPLY'; + const ICAL_METHOD_ADD = 'ADD'; + const ICAL_METHOD_CANCEL = 'CANCEL'; + const ICAL_METHOD_REFRESH = 'REFRESH'; + const ICAL_METHOD_COUNTER = 'COUNTER'; + const ICAL_METHOD_DECLINECOUNTER = 'DECLINECOUNTER'; + + /** + * Email priority. + * Options: null (default), 1 = High, 3 = Normal, 5 = low. + * When null, the header is not set at all. + * + * @var int + */ + public $Priority; + + /** + * The character set of the message. + * + * @var string + */ + public $CharSet = self::CHARSET_ISO88591; + + /** + * The MIME Content-type of the message. + * + * @var string + */ + public $ContentType = self::CONTENT_TYPE_PLAINTEXT; + + /** + * The message encoding. + * Options: "8bit", "7bit", "binary", "base64", and "quoted-printable". + * + * @var string + */ + public $Encoding = self::ENCODING_8BIT; + + /** + * Holds the most recent mailer error message. + * + * @var string + */ + public $ErrorInfo = ''; + + /** + * The From email address for the message. + * + * @var string + */ + public $From = 'root@localhost'; + + /** + * The From name of the message. + * + * @var string + */ + public $FromName = 'Root User'; + + /** + * The envelope sender of the message. + * This will usually be turned into a Return-Path header by the receiver, + * and is the address that bounces will be sent to. + * If not empty, will be passed via `-f` to sendmail or as the 'MAIL FROM' value over SMTP. + * + * @var string + */ + public $Sender = ''; + + /** + * The Subject of the message. + * + * @var string + */ + public $Subject = ''; + + /** + * An HTML or plain text message body. + * If HTML then call isHTML(true). + * + * @var string + */ + public $Body = ''; + + /** + * The plain-text message body. + * This body can be read by mail clients that do not have HTML email + * capability such as mutt & Eudora. + * Clients that can read HTML will view the normal Body. + * + * @var string + */ + public $AltBody = ''; + + /** + * An iCal message part body. + * Only supported in simple alt or alt_inline message types + * To generate iCal event structures, use classes like EasyPeasyICS or iCalcreator. + * + * @see http://sprain.ch/blog/downloads/php-class-easypeasyics-create-ical-files-with-php/ + * @see http://kigkonsult.se/iCalcreator/ + * + * @var string + */ + public $Ical = ''; + + /** + * Value-array of "method" in Contenttype header "text/calendar" + * + * @var string[] + */ + protected static $IcalMethods = [ + self::ICAL_METHOD_REQUEST, + self::ICAL_METHOD_PUBLISH, + self::ICAL_METHOD_REPLY, + self::ICAL_METHOD_ADD, + self::ICAL_METHOD_CANCEL, + self::ICAL_METHOD_REFRESH, + self::ICAL_METHOD_COUNTER, + self::ICAL_METHOD_DECLINECOUNTER, + ]; + + /** + * The complete compiled MIME message body. + * + * @var string + */ + protected $MIMEBody = ''; + + /** + * The complete compiled MIME message headers. + * + * @var string + */ + protected $MIMEHeader = ''; + + /** + * Extra headers that createHeader() doesn't fold in. + * + * @var string + */ + protected $mailHeader = ''; + + /** + * Word-wrap the message body to this number of chars. + * Set to 0 to not wrap. A useful value here is 78, for RFC2822 section 2.1.1 compliance. + * + * @see static::STD_LINE_LENGTH + * + * @var int + */ + public $WordWrap = 0; + + /** + * Which method to use to send mail. + * Options: "mail", "sendmail", or "smtp". + * + * @var string + */ + public $Mailer = 'mail'; + + /** + * The path to the sendmail program. + * + * @var string + */ + public $Sendmail = '/usr/sbin/sendmail'; + + /** + * Whether mail() uses a fully sendmail-compatible MTA. + * One which supports sendmail's "-oi -f" options. + * + * @var bool + */ + public $UseSendmailOptions = true; + + /** + * The email address that a reading confirmation should be sent to, also known as read receipt. + * + * @var string + */ + public $ConfirmReadingTo = ''; + + /** + * The hostname to use in the Message-ID header and as default HELO string. + * If empty, PHPMailer attempts to find one with, in order, + * $_SERVER['SERVER_NAME'], gethostname(), php_uname('n'), or the value + * 'localhost.localdomain'. + * + * @see PHPMailer::$Helo + * + * @var string + */ + public $Hostname = ''; + + /** + * An ID to be used in the Message-ID header. + * If empty, a unique id will be generated. + * You can set your own, but it must be in the format "", + * as defined in RFC5322 section 3.6.4 or it will be ignored. + * + * @see https://tools.ietf.org/html/rfc5322#section-3.6.4 + * + * @var string + */ + public $MessageID = ''; + + /** + * The message Date to be used in the Date header. + * If empty, the current date will be added. + * + * @var string + */ + public $MessageDate = ''; + + /** + * SMTP hosts. + * Either a single hostname or multiple semicolon-delimited hostnames. + * You can also specify a different port + * for each host by using this format: [hostname:port] + * (e.g. "smtp1.example.com:25;smtp2.example.com"). + * You can also specify encryption type, for example: + * (e.g. "tls://smtp1.example.com:587;ssl://smtp2.example.com:465"). + * Hosts will be tried in order. + * + * @var string + */ + public $Host = 'localhost'; + + /** + * The default SMTP server port. + * + * @var int + */ + public $Port = 25; + + /** + * The SMTP HELO/EHLO name used for the SMTP connection. + * Default is $Hostname. If $Hostname is empty, PHPMailer attempts to find + * one with the same method described above for $Hostname. + * + * @see PHPMailer::$Hostname + * + * @var string + */ + public $Helo = ''; + + /** + * What kind of encryption to use on the SMTP connection. + * Options: '', static::ENCRYPTION_STARTTLS, or static::ENCRYPTION_SMTPS. + * + * @var string + */ + public $SMTPSecure = ''; + + /** + * Whether to enable TLS encryption automatically if a server supports it, + * even if `SMTPSecure` is not set to 'tls'. + * Be aware that in PHP >= 5.6 this requires that the server's certificates are valid. + * + * @var bool + */ + public $SMTPAutoTLS = true; + + /** + * Whether to use SMTP authentication. + * Uses the Username and Password properties. + * + * @see PHPMailer::$Username + * @see PHPMailer::$Password + * + * @var bool + */ + public $SMTPAuth = false; + + /** + * Options array passed to stream_context_create when connecting via SMTP. + * + * @var array + */ + public $SMTPOptions = []; + + /** + * SMTP username. + * + * @var string + */ + public $Username = ''; + + /** + * SMTP password. + * + * @var string + */ + public $Password = ''; + + /** + * SMTP auth type. + * Options are CRAM-MD5, LOGIN, PLAIN, XOAUTH2, attempted in that order if not specified. + * + * @var string + */ + public $AuthType = ''; + + /** + * An instance of the PHPMailer OAuth class. + * + * @var OAuth + */ + protected $oauth; + + /** + * The SMTP server timeout in seconds. + * Default of 5 minutes (300sec) is from RFC2821 section 4.5.3.2. + * + * @var int + */ + public $Timeout = 300; + + /** + * Comma separated list of DSN notifications + * 'NEVER' under no circumstances a DSN must be returned to the sender. + * If you use NEVER all other notifications will be ignored. + * 'SUCCESS' will notify you when your mail has arrived at its destination. + * 'FAILURE' will arrive if an error occurred during delivery. + * 'DELAY' will notify you if there is an unusual delay in delivery, but the actual + * delivery's outcome (success or failure) is not yet decided. + * + * @see https://tools.ietf.org/html/rfc3461 See section 4.1 for more information about NOTIFY + */ + public $dsn = ''; + + /** + * SMTP class debug output mode. + * Debug output level. + * Options: + * * SMTP::DEBUG_OFF: No output + * * SMTP::DEBUG_CLIENT: Client messages + * * SMTP::DEBUG_SERVER: Client and server messages + * * SMTP::DEBUG_CONNECTION: As SERVER plus connection status + * * SMTP::DEBUG_LOWLEVEL: Noisy, low-level data output, rarely needed + * + * @see SMTP::$do_debug + * + * @var int + */ + public $SMTPDebug = 0; + + /** + * How to handle debug output. + * Options: + * * `echo` Output plain-text as-is, appropriate for CLI + * * `html` Output escaped, line breaks converted to `
`, appropriate for browser output + * * `error_log` Output to error log as configured in php.ini + * By default PHPMailer will use `echo` if run from a `cli` or `cli-server` SAPI, `html` otherwise. + * Alternatively, you can provide a callable expecting two params: a message string and the debug level: + * + * ```php + * $mail->Debugoutput = function($str, $level) {echo "debug level $level; message: $str";}; + * ``` + * + * Alternatively, you can pass in an instance of a PSR-3 compatible logger, though only `debug` + * level output is used: + * + * ```php + * $mail->Debugoutput = new myPsr3Logger; + * ``` + * + * @see SMTP::$Debugoutput + * + * @var string|callable|\Psr\Log\LoggerInterface + */ + public $Debugoutput = 'echo'; + + /** + * Whether to keep SMTP connection open after each message. + * If this is set to true then to close the connection + * requires an explicit call to smtpClose(). + * + * @var bool + */ + public $SMTPKeepAlive = false; + + /** + * Whether to split multiple to addresses into multiple messages + * or send them all in one message. + * Only supported in `mail` and `sendmail` transports, not in SMTP. + * + * @var bool + */ + public $SingleTo = false; + + /** + * Storage for addresses when SingleTo is enabled. + * + * @var array + */ + protected $SingleToArray = []; + + /** + * Whether to generate VERP addresses on send. + * Only applicable when sending via SMTP. + * + * @see https://en.wikipedia.org/wiki/Variable_envelope_return_path + * @see http://www.postfix.org/VERP_README.html Postfix VERP info + * + * @var bool + */ + public $do_verp = false; + + /** + * Whether to allow sending messages with an empty body. + * + * @var bool + */ + public $AllowEmpty = false; + + /** + * DKIM selector. + * + * @var string + */ + public $DKIM_selector = ''; + + /** + * DKIM Identity. + * Usually the email address used as the source of the email. + * + * @var string + */ + public $DKIM_identity = ''; + + /** + * DKIM passphrase. + * Used if your key is encrypted. + * + * @var string + */ + public $DKIM_passphrase = ''; + + /** + * DKIM signing domain name. + * + * @example 'example.com' + * + * @var string + */ + public $DKIM_domain = ''; + + /** + * DKIM Copy header field values for diagnostic use. + * + * @var bool + */ + public $DKIM_copyHeaderFields = true; + + /** + * DKIM Extra signing headers. + * + * @example ['List-Unsubscribe', 'List-Help'] + * + * @var array + */ + public $DKIM_extraHeaders = []; + + /** + * DKIM private key file path. + * + * @var string + */ + public $DKIM_private = ''; + + /** + * DKIM private key string. + * + * If set, takes precedence over `$DKIM_private`. + * + * @var string + */ + public $DKIM_private_string = ''; + + /** + * Callback Action function name. + * + * The function that handles the result of the send email action. + * It is called out by send() for each email sent. + * + * Value can be any php callable: http://www.php.net/is_callable + * + * Parameters: + * bool $result result of the send action + * array $to email addresses of the recipients + * array $cc cc email addresses + * array $bcc bcc email addresses + * string $subject the subject + * string $body the email body + * string $from email address of sender + * string $extra extra information of possible use + * "smtp_transaction_id' => last smtp transaction id + * + * @var string + */ + public $action_function = ''; + + /** + * What to put in the X-Mailer header. + * Options: An empty string for PHPMailer default, whitespace/null for none, or a string to use. + * + * @var string|null + */ + public $XMailer = ''; + + /** + * Which validator to use by default when validating email addresses. + * May be a callable to inject your own validator, but there are several built-in validators. + * The default validator uses PHP's FILTER_VALIDATE_EMAIL filter_var option. + * + * @see PHPMailer::validateAddress() + * + * @var string|callable + */ + public static $validator = 'php'; + + /** + * An instance of the SMTP sender class. + * + * @var SMTP + */ + protected $smtp; + + /** + * The array of 'to' names and addresses. + * + * @var array + */ + protected $to = []; + + /** + * The array of 'cc' names and addresses. + * + * @var array + */ + protected $cc = []; + + /** + * The array of 'bcc' names and addresses. + * + * @var array + */ + protected $bcc = []; + + /** + * The array of reply-to names and addresses. + * + * @var array + */ + protected $ReplyTo = []; + + /** + * An array of all kinds of addresses. + * Includes all of $to, $cc, $bcc. + * + * @see PHPMailer::$to + * @see PHPMailer::$cc + * @see PHPMailer::$bcc + * + * @var array + */ + protected $all_recipients = []; + + /** + * An array of names and addresses queued for validation. + * In send(), valid and non duplicate entries are moved to $all_recipients + * and one of $to, $cc, or $bcc. + * This array is used only for addresses with IDN. + * + * @see PHPMailer::$to + * @see PHPMailer::$cc + * @see PHPMailer::$bcc + * @see PHPMailer::$all_recipients + * + * @var array + */ + protected $RecipientsQueue = []; + + /** + * An array of reply-to names and addresses queued for validation. + * In send(), valid and non duplicate entries are moved to $ReplyTo. + * This array is used only for addresses with IDN. + * + * @see PHPMailer::$ReplyTo + * + * @var array + */ + protected $ReplyToQueue = []; + + /** + * The array of attachments. + * + * @var array + */ + protected $attachment = []; + + /** + * The array of custom headers. + * + * @var array + */ + protected $CustomHeader = []; + + /** + * The most recent Message-ID (including angular brackets). + * + * @var string + */ + protected $lastMessageID = ''; + + /** + * The message's MIME type. + * + * @var string + */ + protected $message_type = ''; + + /** + * The array of MIME boundary strings. + * + * @var array + */ + protected $boundary = []; + + /** + * The array of available languages. + * + * @var array + */ + protected $language = []; + + /** + * The number of errors encountered. + * + * @var int + */ + protected $error_count = 0; + + /** + * The S/MIME certificate file path. + * + * @var string + */ + protected $sign_cert_file = ''; + + /** + * The S/MIME key file path. + * + * @var string + */ + protected $sign_key_file = ''; + + /** + * The optional S/MIME extra certificates ("CA Chain") file path. + * + * @var string + */ + protected $sign_extracerts_file = ''; + + /** + * The S/MIME password for the key. + * Used only if the key is encrypted. + * + * @var string + */ + protected $sign_key_pass = ''; + + /** + * Whether to throw exceptions for errors. + * + * @var bool + */ + protected $exceptions = false; + + /** + * Unique ID used for message ID and boundaries. + * + * @var string + */ + protected $uniqueid = ''; + + /** + * The PHPMailer Version number. + * + * @var string + */ + const VERSION = '6.1.4'; + + /** + * Error severity: message only, continue processing. + * + * @var int + */ + const STOP_MESSAGE = 0; + + /** + * Error severity: message, likely ok to continue processing. + * + * @var int + */ + const STOP_CONTINUE = 1; + + /** + * Error severity: message, plus full stop, critical error reached. + * + * @var int + */ + const STOP_CRITICAL = 2; + + /** + * SMTP RFC standard line ending. + * + * @var string + */ + protected static $LE = "\r\n"; + + /** + * The maximum line length supported by mail(). + * + * Background: mail() will sometimes corrupt messages + * with headers headers longer than 65 chars, see #818. + * + * @var int + */ + const MAIL_MAX_LINE_LENGTH = 63; + + /** + * The maximum line length allowed by RFC 2822 section 2.1.1. + * + * @var int + */ + const MAX_LINE_LENGTH = 998; + + /** + * The lower maximum line length allowed by RFC 2822 section 2.1.1. + * This length does NOT include the line break + * 76 means that lines will be 77 or 78 chars depending on whether + * the line break format is LF or CRLF; both are valid. + * + * @var int + */ + const STD_LINE_LENGTH = 76; + + /** + * Constructor. + * + * @param bool $exceptions Should we throw external exceptions? + */ + public function __construct($exceptions = null) + { + if (null !== $exceptions) { + $this->exceptions = (bool) $exceptions; + } + //Pick an appropriate debug output format automatically + $this->Debugoutput = (strpos(PHP_SAPI, 'cli') !== false ? 'echo' : 'html'); + } + + /** + * Destructor. + */ + public function __destruct() + { + //Close any open SMTP connection nicely + $this->smtpClose(); + } + + /** + * Call mail() in a safe_mode-aware fashion. + * Also, unless sendmail_path points to sendmail (or something that + * claims to be sendmail), don't pass params (not a perfect fix, + * but it will do). + * + * @param string $to To + * @param string $subject Subject + * @param string $body Message Body + * @param string $header Additional Header(s) + * @param string|null $params Params + * + * @return bool + */ + private function mailPassthru($to, $subject, $body, $header, $params) + { + //Check overloading of mail function to avoid double-encoding + if (ini_get('mbstring.func_overload') & 1) { + $subject = $this->secureHeader($subject); + } else { + $subject = $this->encodeHeader($this->secureHeader($subject)); + } + //Calling mail() with null params breaks + if (!$this->UseSendmailOptions || null === $params) { + $result = @mail($to, $subject, $body, $header); + } else { + $result = @mail($to, $subject, $body, $header, $params); + } + + return $result; + } + + /** + * Output debugging info via user-defined method. + * Only generates output if SMTP debug output is enabled (@see SMTP::$do_debug). + * + * @see PHPMailer::$Debugoutput + * @see PHPMailer::$SMTPDebug + * + * @param string $str + */ + protected function edebug($str) + { + if ($this->SMTPDebug <= 0) { + return; + } + //Is this a PSR-3 logger? + if ($this->Debugoutput instanceof \Psr\Log\LoggerInterface) { + $this->Debugoutput->debug($str); + + return; + } + //Avoid clash with built-in function names + if (is_callable($this->Debugoutput) && !in_array($this->Debugoutput, ['error_log', 'html', 'echo'])) { + call_user_func($this->Debugoutput, $str, $this->SMTPDebug); + + return; + } + switch ($this->Debugoutput) { + case 'error_log': + //Don't output, just log + error_log($str); + break; + case 'html': + //Cleans up output a bit for a better looking, HTML-safe output + echo htmlentities( + preg_replace('/[\r\n]+/', '', $str), + ENT_QUOTES, + 'UTF-8' + ), "
\n"; + break; + case 'echo': + default: + //Normalize line breaks + $str = preg_replace('/\r\n|\r/m', "\n", $str); + echo gmdate('Y-m-d H:i:s'), + "\t", + //Trim trailing space + trim( + //Indent for readability, except for trailing break + str_replace( + "\n", + "\n \t ", + trim($str) + ) + ), + "\n"; + } + } + + /** + * Sets message type to HTML or plain. + * + * @param bool $isHtml True for HTML mode + */ + public function isHTML($isHtml = true) + { + if ($isHtml) { + $this->ContentType = static::CONTENT_TYPE_TEXT_HTML; + } else { + $this->ContentType = static::CONTENT_TYPE_PLAINTEXT; + } + } + + /** + * Send messages using SMTP. + */ + public function isSMTP() + { + $this->Mailer = 'smtp'; + } + + /** + * Send messages using PHP's mail() function. + */ + public function isMail() + { + $this->Mailer = 'mail'; + } + + /** + * Send messages using $Sendmail. + */ + public function isSendmail() + { + $ini_sendmail_path = ini_get('sendmail_path'); + + if (false === stripos($ini_sendmail_path, 'sendmail')) { + $this->Sendmail = '/usr/sbin/sendmail'; + } else { + $this->Sendmail = $ini_sendmail_path; + } + $this->Mailer = 'sendmail'; + } + + /** + * Send messages using qmail. + */ + public function isQmail() + { + $ini_sendmail_path = ini_get('sendmail_path'); + + if (false === stripos($ini_sendmail_path, 'qmail')) { + $this->Sendmail = '/var/qmail/bin/qmail-inject'; + } else { + $this->Sendmail = $ini_sendmail_path; + } + $this->Mailer = 'qmail'; + } + + /** + * Add a "To" address. + * + * @param string $address The email address to send to + * @param string $name + * + * @throws Exception + * + * @return bool true on success, false if address already used or invalid in some way + */ + public function addAddress($address, $name = '') + { + return $this->addOrEnqueueAnAddress('to', $address, $name); + } + + /** + * Add a "CC" address. + * + * @param string $address The email address to send to + * @param string $name + * + * @throws Exception + * + * @return bool true on success, false if address already used or invalid in some way + */ + public function addCC($address, $name = '') + { + return $this->addOrEnqueueAnAddress('cc', $address, $name); + } + + /** + * Add a "BCC" address. + * + * @param string $address The email address to send to + * @param string $name + * + * @throws Exception + * + * @return bool true on success, false if address already used or invalid in some way + */ + public function addBCC($address, $name = '') + { + return $this->addOrEnqueueAnAddress('bcc', $address, $name); + } + + /** + * Add a "Reply-To" address. + * + * @param string $address The email address to reply to + * @param string $name + * + * @throws Exception + * + * @return bool true on success, false if address already used or invalid in some way + */ + public function addReplyTo($address, $name = '') + { + return $this->addOrEnqueueAnAddress('Reply-To', $address, $name); + } + + /** + * Add an address to one of the recipient arrays or to the ReplyTo array. Because PHPMailer + * can't validate addresses with an IDN without knowing the PHPMailer::$CharSet (that can still + * be modified after calling this function), addition of such addresses is delayed until send(). + * Addresses that have been added already return false, but do not throw exceptions. + * + * @param string $kind One of 'to', 'cc', 'bcc', or 'ReplyTo' + * @param string $address The email address to send, resp. to reply to + * @param string $name + * + * @throws Exception + * + * @return bool true on success, false if address already used or invalid in some way + */ + protected function addOrEnqueueAnAddress($kind, $address, $name) + { + $address = trim($address); + $name = trim(preg_replace('/[\r\n]+/', '', $name)); //Strip breaks and trim + $pos = strrpos($address, '@'); + if (false === $pos) { + // At-sign is missing. + $error_message = sprintf( + '%s (%s): %s', + $this->lang('invalid_address'), + $kind, + $address + ); + $this->setError($error_message); + $this->edebug($error_message); + if ($this->exceptions) { + throw new Exception($error_message); + } + + return false; + } + $params = [$kind, $address, $name]; + // Enqueue addresses with IDN until we know the PHPMailer::$CharSet. + if (static::idnSupported() && $this->has8bitChars(substr($address, ++$pos))) { + if ('Reply-To' !== $kind) { + if (!array_key_exists($address, $this->RecipientsQueue)) { + $this->RecipientsQueue[$address] = $params; + + return true; + } + } elseif (!array_key_exists($address, $this->ReplyToQueue)) { + $this->ReplyToQueue[$address] = $params; + + return true; + } + + return false; + } + + // Immediately add standard addresses without IDN. + return call_user_func_array([$this, 'addAnAddress'], $params); + } + + /** + * Add an address to one of the recipient arrays or to the ReplyTo array. + * Addresses that have been added already return false, but do not throw exceptions. + * + * @param string $kind One of 'to', 'cc', 'bcc', or 'ReplyTo' + * @param string $address The email address to send, resp. to reply to + * @param string $name + * + * @throws Exception + * + * @return bool true on success, false if address already used or invalid in some way + */ + protected function addAnAddress($kind, $address, $name = '') + { + if (!in_array($kind, ['to', 'cc', 'bcc', 'Reply-To'])) { + $error_message = sprintf( + '%s: %s', + $this->lang('Invalid recipient kind'), + $kind + ); + $this->setError($error_message); + $this->edebug($error_message); + if ($this->exceptions) { + throw new Exception($error_message); + } + + return false; + } + if (!static::validateAddress($address)) { + $error_message = sprintf( + '%s (%s): %s', + $this->lang('invalid_address'), + $kind, + $address + ); + $this->setError($error_message); + $this->edebug($error_message); + if ($this->exceptions) { + throw new Exception($error_message); + } + + return false; + } + if ('Reply-To' !== $kind) { + if (!array_key_exists(strtolower($address), $this->all_recipients)) { + $this->{$kind}[] = [$address, $name]; + $this->all_recipients[strtolower($address)] = true; + + return true; + } + } elseif (!array_key_exists(strtolower($address), $this->ReplyTo)) { + $this->ReplyTo[strtolower($address)] = [$address, $name]; + + return true; + } + + return false; + } + + /** + * Parse and validate a string containing one or more RFC822-style comma-separated email addresses + * of the form "display name
" into an array of name/address pairs. + * Uses the imap_rfc822_parse_adrlist function if the IMAP extension is available. + * Note that quotes in the name part are removed. + * + * @see http://www.andrew.cmu.edu/user/agreen1/testing/mrbs/web/Mail/RFC822.php A more careful implementation + * + * @param string $addrstr The address list string + * @param bool $useimap Whether to use the IMAP extension to parse the list + * + * @return array + */ + public static function parseAddresses($addrstr, $useimap = true) + { + $addresses = []; + if ($useimap && function_exists('imap_rfc822_parse_adrlist')) { + //Use this built-in parser if it's available + $list = imap_rfc822_parse_adrlist($addrstr, ''); + foreach ($list as $address) { + if (('.SYNTAX-ERROR.' !== $address->host) && static::validateAddress( + $address->mailbox . '@' . $address->host + )) { + $addresses[] = [ + 'name' => (property_exists($address, 'personal') ? $address->personal : ''), + 'address' => $address->mailbox . '@' . $address->host, + ]; + } + } + } else { + //Use this simpler parser + $list = explode(',', $addrstr); + foreach ($list as $address) { + $address = trim($address); + //Is there a separate name part? + if (strpos($address, '<') === false) { + //No separate name, just use the whole thing + if (static::validateAddress($address)) { + $addresses[] = [ + 'name' => '', + 'address' => $address, + ]; + } + } else { + list($name, $email) = explode('<', $address); + $email = trim(str_replace('>', '', $email)); + if (static::validateAddress($email)) { + $addresses[] = [ + 'name' => trim(str_replace(['"', "'"], '', $name)), + 'address' => $email, + ]; + } + } + } + } + + return $addresses; + } + + /** + * Set the From and FromName properties. + * + * @param string $address + * @param string $name + * @param bool $auto Whether to also set the Sender address, defaults to true + * + * @throws Exception + * + * @return bool + */ + public function setFrom($address, $name = '', $auto = true) + { + $address = trim($address); + $name = trim(preg_replace('/[\r\n]+/', '', $name)); //Strip breaks and trim + // Don't validate now addresses with IDN. Will be done in send(). + $pos = strrpos($address, '@'); + if ((false === $pos) + || ((!$this->has8bitChars(substr($address, ++$pos)) || !static::idnSupported()) + && !static::validateAddress($address)) + ) { + $error_message = sprintf( + '%s (From): %s', + $this->lang('invalid_address'), + $address + ); + $this->setError($error_message); + $this->edebug($error_message); + if ($this->exceptions) { + throw new Exception($error_message); + } + + return false; + } + $this->From = $address; + $this->FromName = $name; + if ($auto && empty($this->Sender)) { + $this->Sender = $address; + } + + return true; + } + + /** + * Return the Message-ID header of the last email. + * Technically this is the value from the last time the headers were created, + * but it's also the message ID of the last sent message except in + * pathological cases. + * + * @return string + */ + public function getLastMessageID() + { + return $this->lastMessageID; + } + + /** + * Check that a string looks like an email address. + * Validation patterns supported: + * * `auto` Pick best pattern automatically; + * * `pcre8` Use the squiloople.com pattern, requires PCRE > 8.0; + * * `pcre` Use old PCRE implementation; + * * `php` Use PHP built-in FILTER_VALIDATE_EMAIL; + * * `html5` Use the pattern given by the HTML5 spec for 'email' type form input elements. + * * `noregex` Don't use a regex: super fast, really dumb. + * Alternatively you may pass in a callable to inject your own validator, for example: + * + * ```php + * PHPMailer::validateAddress('user@example.com', function($address) { + * return (strpos($address, '@') !== false); + * }); + * ``` + * + * You can also set the PHPMailer::$validator static to a callable, allowing built-in methods to use your validator. + * + * @param string $address The email address to check + * @param string|callable $patternselect Which pattern to use + * + * @return bool + */ + public static function validateAddress($address, $patternselect = null) + { + if (null === $patternselect) { + $patternselect = static::$validator; + } + if (is_callable($patternselect)) { + return $patternselect($address); + } + //Reject line breaks in addresses; it's valid RFC5322, but not RFC5321 + if (strpos($address, "\n") !== false || strpos($address, "\r") !== false) { + return false; + } + switch ($patternselect) { + case 'pcre': //Kept for BC + case 'pcre8': + /* + * A more complex and more permissive version of the RFC5322 regex on which FILTER_VALIDATE_EMAIL + * is based. + * In addition to the addresses allowed by filter_var, also permits: + * * dotless domains: `a@b` + * * comments: `1234 @ local(blah) .machine .example` + * * quoted elements: `'"test blah"@example.org'` + * * numeric TLDs: `a@b.123` + * * unbracketed IPv4 literals: `a@192.168.0.1` + * * IPv6 literals: 'first.last@[IPv6:a1::]' + * Not all of these will necessarily work for sending! + * + * @see http://squiloople.com/2009/12/20/email-address-validation/ + * @copyright 2009-2010 Michael Rushton + * Feel free to use and redistribute this code. But please keep this copyright notice. + */ + return (bool) preg_match( + '/^(?!(?>(?1)"?(?>\\\[ -~]|[^"])"?(?1)){255,})(?!(?>(?1)"?(?>\\\[ -~]|[^"])"?(?1)){65,}@)' . + '((?>(?>(?>((?>(?>(?>\x0D\x0A)?[\t ])+|(?>[\t ]*\x0D\x0A)?[\t ]+)?)(\((?>(?2)' . + '(?>[\x01-\x08\x0B\x0C\x0E-\'*-\[\]-\x7F]|\\\[\x00-\x7F]|(?3)))*(?2)\)))+(?2))|(?2))?)' . + '([!#-\'*+\/-9=?^-~-]+|"(?>(?2)(?>[\x01-\x08\x0B\x0C\x0E-!#-\[\]-\x7F]|\\\[\x00-\x7F]))*' . + '(?2)")(?>(?1)\.(?1)(?4))*(?1)@(?!(?1)[a-z0-9-]{64,})(?1)(?>([a-z0-9](?>[a-z0-9-]*[a-z0-9])?)' . + '(?>(?1)\.(?!(?1)[a-z0-9-]{64,})(?1)(?5)){0,126}|\[(?:(?>IPv6:(?>([a-f0-9]{1,4})(?>:(?6)){7}' . + '|(?!(?:.*[a-f0-9][:\]]){8,})((?6)(?>:(?6)){0,6})?::(?7)?))|(?>(?>IPv6:(?>(?6)(?>:(?6)){5}:' . + '|(?!(?:.*[a-f0-9]:){6,})(?8)?::(?>((?6)(?>:(?6)){0,4}):)?))?(25[0-5]|2[0-4][0-9]|1[0-9]{2}' . + '|[1-9]?[0-9])(?>\.(?9)){3}))\])(?1)$/isD', + $address + ); + case 'html5': + /* + * This is the pattern used in the HTML5 spec for validation of 'email' type form input elements. + * + * @see http://www.whatwg.org/specs/web-apps/current-work/#e-mail-state-(type=email) + */ + return (bool) preg_match( + '/^[a-zA-Z0-9.!#$%&\'*+\/=?^_`{|}~-]+@[a-zA-Z0-9](?:[a-zA-Z0-9-]{0,61}' . + '[a-zA-Z0-9])?(?:\.[a-zA-Z0-9](?:[a-zA-Z0-9-]{0,61}[a-zA-Z0-9])?)*$/sD', + $address + ); + case 'php': + default: + return filter_var($address, FILTER_VALIDATE_EMAIL) !== false; + } + } + + /** + * Tells whether IDNs (Internationalized Domain Names) are supported or not. This requires the + * `intl` and `mbstring` PHP extensions. + * + * @return bool `true` if required functions for IDN support are present + */ + public static function idnSupported() + { + return function_exists('idn_to_ascii') && function_exists('mb_convert_encoding'); + } + + /** + * Converts IDN in given email address to its ASCII form, also known as punycode, if possible. + * Important: Address must be passed in same encoding as currently set in PHPMailer::$CharSet. + * This function silently returns unmodified address if: + * - No conversion is necessary (i.e. domain name is not an IDN, or is already in ASCII form) + * - Conversion to punycode is impossible (e.g. required PHP functions are not available) + * or fails for any reason (e.g. domain contains characters not allowed in an IDN). + * + * @see PHPMailer::$CharSet + * + * @param string $address The email address to convert + * + * @return string The encoded address in ASCII form + */ + public function punyencodeAddress($address) + { + // Verify we have required functions, CharSet, and at-sign. + $pos = strrpos($address, '@'); + if (!empty($this->CharSet) && + false !== $pos && + static::idnSupported() + ) { + $domain = substr($address, ++$pos); + // Verify CharSet string is a valid one, and domain properly encoded in this CharSet. + if ($this->has8bitChars($domain) && @mb_check_encoding($domain, $this->CharSet)) { + $domain = mb_convert_encoding($domain, 'UTF-8', $this->CharSet); + //Ignore IDE complaints about this line - method signature changed in PHP 5.4 + $errorcode = 0; + if (defined('INTL_IDNA_VARIANT_UTS46')) { + $punycode = idn_to_ascii($domain, $errorcode, INTL_IDNA_VARIANT_UTS46); + } elseif (defined('INTL_IDNA_VARIANT_2003')) { + $punycode = idn_to_ascii($domain, $errorcode, INTL_IDNA_VARIANT_2003); + } else { + $punycode = idn_to_ascii($domain, $errorcode); + } + if (false !== $punycode) { + return substr($address, 0, $pos) . $punycode; + } + } + } + + return $address; + } + + /** + * Create a message and send it. + * Uses the sending method specified by $Mailer. + * + * @throws Exception + * + * @return bool false on error - See the ErrorInfo property for details of the error + */ + public function send() + { + try { + if (!$this->preSend()) { + return false; + } + + return $this->postSend(); + } catch (Exception $exc) { + $this->mailHeader = ''; + $this->setError($exc->getMessage()); + if ($this->exceptions) { + throw $exc; + } + + return false; + } + } + + /** + * Prepare a message for sending. + * + * @throws Exception + * + * @return bool + */ + public function preSend() + { + if ('smtp' === $this->Mailer + || ('mail' === $this->Mailer && stripos(PHP_OS, 'WIN') === 0) + ) { + //SMTP mandates RFC-compliant line endings + //and it's also used with mail() on Windows + static::setLE("\r\n"); + } else { + //Maintain backward compatibility with legacy Linux command line mailers + static::setLE(PHP_EOL); + } + //Check for buggy PHP versions that add a header with an incorrect line break + if ('mail' === $this->Mailer + && ((PHP_VERSION_ID >= 70000 && PHP_VERSION_ID < 70017) + || (PHP_VERSION_ID >= 70100 && PHP_VERSION_ID < 70103)) + && ini_get('mail.add_x_header') === '1' + && stripos(PHP_OS, 'WIN') === 0 + ) { + trigger_error( + 'Your version of PHP is affected by a bug that may result in corrupted messages.' . + ' To fix it, switch to sending using SMTP, disable the mail.add_x_header option in' . + ' your php.ini, switch to MacOS or Linux, or upgrade your PHP to version 7.0.17+ or 7.1.3+.', + E_USER_WARNING + ); + } + + try { + $this->error_count = 0; // Reset errors + $this->mailHeader = ''; + + // Dequeue recipient and Reply-To addresses with IDN + foreach (array_merge($this->RecipientsQueue, $this->ReplyToQueue) as $params) { + $params[1] = $this->punyencodeAddress($params[1]); + call_user_func_array([$this, 'addAnAddress'], $params); + } + if (count($this->to) + count($this->cc) + count($this->bcc) < 1) { + throw new Exception($this->lang('provide_address'), self::STOP_CRITICAL); + } + + // Validate From, Sender, and ConfirmReadingTo addresses + foreach (['From', 'Sender', 'ConfirmReadingTo'] as $address_kind) { + $this->$address_kind = trim($this->$address_kind); + if (empty($this->$address_kind)) { + continue; + } + $this->$address_kind = $this->punyencodeAddress($this->$address_kind); + if (!static::validateAddress($this->$address_kind)) { + $error_message = sprintf( + '%s (%s): %s', + $this->lang('invalid_address'), + $address_kind, + $this->$address_kind + ); + $this->setError($error_message); + $this->edebug($error_message); + if ($this->exceptions) { + throw new Exception($error_message); + } + + return false; + } + } + + // Set whether the message is multipart/alternative + if ($this->alternativeExists()) { + $this->ContentType = static::CONTENT_TYPE_MULTIPART_ALTERNATIVE; + } + + $this->setMessageType(); + // Refuse to send an empty message unless we are specifically allowing it + if (!$this->AllowEmpty && empty($this->Body)) { + throw new Exception($this->lang('empty_message'), self::STOP_CRITICAL); + } + + //Trim subject consistently + $this->Subject = trim($this->Subject); + // Create body before headers in case body makes changes to headers (e.g. altering transfer encoding) + $this->MIMEHeader = ''; + $this->MIMEBody = $this->createBody(); + // createBody may have added some headers, so retain them + $tempheaders = $this->MIMEHeader; + $this->MIMEHeader = $this->createHeader(); + $this->MIMEHeader .= $tempheaders; + + // To capture the complete message when using mail(), create + // an extra header list which createHeader() doesn't fold in + if ('mail' === $this->Mailer) { + if (count($this->to) > 0) { + $this->mailHeader .= $this->addrAppend('To', $this->to); + } else { + $this->mailHeader .= $this->headerLine('To', 'undisclosed-recipients:;'); + } + $this->mailHeader .= $this->headerLine( + 'Subject', + $this->encodeHeader($this->secureHeader($this->Subject)) + ); + } + + // Sign with DKIM if enabled + if (!empty($this->DKIM_domain) + && !empty($this->DKIM_selector) + && (!empty($this->DKIM_private_string) + || (!empty($this->DKIM_private) + && static::isPermittedPath($this->DKIM_private) + && file_exists($this->DKIM_private) + ) + ) + ) { + $header_dkim = $this->DKIM_Add( + $this->MIMEHeader . $this->mailHeader, + $this->encodeHeader($this->secureHeader($this->Subject)), + $this->MIMEBody + ); + $this->MIMEHeader = rtrim($this->MIMEHeader, "\r\n ") . static::$LE . + static::normalizeBreaks($header_dkim) . static::$LE; + } + + return true; + } catch (Exception $exc) { + $this->setError($exc->getMessage()); + if ($this->exceptions) { + throw $exc; + } + + return false; + } + } + + /** + * Actually send a message via the selected mechanism. + * + * @throws Exception + * + * @return bool + */ + public function postSend() + { + try { + // Choose the mailer and send through it + switch ($this->Mailer) { + case 'sendmail': + case 'qmail': + return $this->sendmailSend($this->MIMEHeader, $this->MIMEBody); + case 'smtp': + return $this->smtpSend($this->MIMEHeader, $this->MIMEBody); + case 'mail': + return $this->mailSend($this->MIMEHeader, $this->MIMEBody); + default: + $sendMethod = $this->Mailer . 'Send'; + if (method_exists($this, $sendMethod)) { + return $this->$sendMethod($this->MIMEHeader, $this->MIMEBody); + } + + return $this->mailSend($this->MIMEHeader, $this->MIMEBody); + } + } catch (Exception $exc) { + $this->setError($exc->getMessage()); + $this->edebug($exc->getMessage()); + if ($this->exceptions) { + throw $exc; + } + } + + return false; + } + + /** + * Send mail using the $Sendmail program. + * + * @see PHPMailer::$Sendmail + * + * @param string $header The message headers + * @param string $body The message body + * + * @throws Exception + * + * @return bool + */ + protected function sendmailSend($header, $body) + { + $header = rtrim($header, "\r\n ") . static::$LE . static::$LE; + + // CVE-2016-10033, CVE-2016-10045: Don't pass -f if characters will be escaped. + if (!empty($this->Sender) && self::isShellSafe($this->Sender)) { + if ('qmail' === $this->Mailer) { + $sendmailFmt = '%s -f%s'; + } else { + $sendmailFmt = '%s -oi -f%s -t'; + } + } elseif ('qmail' === $this->Mailer) { + $sendmailFmt = '%s'; + } else { + $sendmailFmt = '%s -oi -t'; + } + + $sendmail = sprintf($sendmailFmt, escapeshellcmd($this->Sendmail), $this->Sender); + + if ($this->SingleTo) { + foreach ($this->SingleToArray as $toAddr) { + $mail = @popen($sendmail, 'w'); + if (!$mail) { + throw new Exception($this->lang('execute') . $this->Sendmail, self::STOP_CRITICAL); + } + fwrite($mail, 'To: ' . $toAddr . "\n"); + fwrite($mail, $header); + fwrite($mail, $body); + $result = pclose($mail); + $this->doCallback( + ($result === 0), + [$toAddr], + $this->cc, + $this->bcc, + $this->Subject, + $body, + $this->From, + [] + ); + if (0 !== $result) { + throw new Exception($this->lang('execute') . $this->Sendmail, self::STOP_CRITICAL); + } + } + } else { + $mail = @popen($sendmail, 'w'); + if (!$mail) { + throw new Exception($this->lang('execute') . $this->Sendmail, self::STOP_CRITICAL); + } + fwrite($mail, $header); + fwrite($mail, $body); + $result = pclose($mail); + $this->doCallback( + ($result === 0), + $this->to, + $this->cc, + $this->bcc, + $this->Subject, + $body, + $this->From, + [] + ); + if (0 !== $result) { + throw new Exception($this->lang('execute') . $this->Sendmail, self::STOP_CRITICAL); + } + } + + return true; + } + + /** + * Fix CVE-2016-10033 and CVE-2016-10045 by disallowing potentially unsafe shell characters. + * Note that escapeshellarg and escapeshellcmd are inadequate for our purposes, especially on Windows. + * + * @see https://github.com/PHPMailer/PHPMailer/issues/924 CVE-2016-10045 bug report + * + * @param string $string The string to be validated + * + * @return bool + */ + protected static function isShellSafe($string) + { + // Future-proof + if (escapeshellcmd($string) !== $string + || !in_array(escapeshellarg($string), ["'$string'", "\"$string\""]) + ) { + return false; + } + + $length = strlen($string); + + for ($i = 0; $i < $length; ++$i) { + $c = $string[$i]; + + // All other characters have a special meaning in at least one common shell, including = and +. + // Full stop (.) has a special meaning in cmd.exe, but its impact should be negligible here. + // Note that this does permit non-Latin alphanumeric characters based on the current locale. + if (!ctype_alnum($c) && strpos('@_-.', $c) === false) { + return false; + } + } + + return true; + } + + /** + * Check whether a file path is of a permitted type. + * Used to reject URLs and phar files from functions that access local file paths, + * such as addAttachment. + * + * @param string $path A relative or absolute path to a file + * + * @return bool + */ + protected static function isPermittedPath($path) + { + return !preg_match('#^[a-z]+://#i', $path); + } + + /** + * Send mail using the PHP mail() function. + * + * @see http://www.php.net/manual/en/book.mail.php + * + * @param string $header The message headers + * @param string $body The message body + * + * @throws Exception + * + * @return bool + */ + protected function mailSend($header, $body) + { + $header = rtrim($header, "\r\n ") . static::$LE . static::$LE; + + $toArr = []; + foreach ($this->to as $toaddr) { + $toArr[] = $this->addrFormat($toaddr); + } + $to = implode(', ', $toArr); + + $params = null; + //This sets the SMTP envelope sender which gets turned into a return-path header by the receiver + //A space after `-f` is optional, but there is a long history of its presence + //causing problems, so we don't use one + //Exim docs: http://www.exim.org/exim-html-current/doc/html/spec_html/ch-the_exim_command_line.html + //Sendmail docs: http://www.sendmail.org/~ca/email/man/sendmail.html + //Qmail docs: http://www.qmail.org/man/man8/qmail-inject.html + //Example problem: https://www.drupal.org/node/1057954 + // CVE-2016-10033, CVE-2016-10045: Don't pass -f if characters will be escaped. + if (!empty($this->Sender) && static::validateAddress($this->Sender) && self::isShellSafe($this->Sender)) { + $params = sprintf('-f%s', $this->Sender); + } + if (!empty($this->Sender) && static::validateAddress($this->Sender)) { + $old_from = ini_get('sendmail_from'); + ini_set('sendmail_from', $this->Sender); + } + $result = false; + if ($this->SingleTo && count($toArr) > 1) { + foreach ($toArr as $toAddr) { + $result = $this->mailPassthru($toAddr, $this->Subject, $body, $header, $params); + $this->doCallback($result, [$toAddr], $this->cc, $this->bcc, $this->Subject, $body, $this->From, []); + } + } else { + $result = $this->mailPassthru($to, $this->Subject, $body, $header, $params); + $this->doCallback($result, $this->to, $this->cc, $this->bcc, $this->Subject, $body, $this->From, []); + } + if (isset($old_from)) { + ini_set('sendmail_from', $old_from); + } + if (!$result) { + throw new Exception($this->lang('instantiate'), self::STOP_CRITICAL); + } + + return true; + } + + /** + * Get an instance to use for SMTP operations. + * Override this function to load your own SMTP implementation, + * or set one with setSMTPInstance. + * + * @return SMTP + */ + public function getSMTPInstance() + { + if (!is_object($this->smtp)) { + $this->smtp = new SMTP(); + } + + return $this->smtp; + } + + /** + * Provide an instance to use for SMTP operations. + * + * @return SMTP + */ + public function setSMTPInstance(SMTP $smtp) + { + $this->smtp = $smtp; + + return $this->smtp; + } + + /** + * Send mail via SMTP. + * Returns false if there is a bad MAIL FROM, RCPT, or DATA input. + * + * @see PHPMailer::setSMTPInstance() to use a different class. + * + * @uses \PHPMailer\PHPMailer\SMTP + * + * @param string $header The message headers + * @param string $body The message body + * + * @throws Exception + * + * @return bool + */ + protected function smtpSend($header, $body) + { + $header = rtrim($header, "\r\n ") . static::$LE . static::$LE; + $bad_rcpt = []; + if (!$this->smtpConnect($this->SMTPOptions)) { + throw new Exception($this->lang('smtp_connect_failed'), self::STOP_CRITICAL); + } + //Sender already validated in preSend() + if ('' === $this->Sender) { + $smtp_from = $this->From; + } else { + $smtp_from = $this->Sender; + } + if (!$this->smtp->mail($smtp_from)) { + $this->setError($this->lang('from_failed') . $smtp_from . ' : ' . implode(',', $this->smtp->getError())); + throw new Exception($this->ErrorInfo, self::STOP_CRITICAL); + } + + $callbacks = []; + // Attempt to send to all recipients + foreach ([$this->to, $this->cc, $this->bcc] as $togroup) { + foreach ($togroup as $to) { + if (!$this->smtp->recipient($to[0], $this->dsn)) { + $error = $this->smtp->getError(); + $bad_rcpt[] = ['to' => $to[0], 'error' => $error['detail']]; + $isSent = false; + } else { + $isSent = true; + } + + $callbacks[] = ['issent'=>$isSent, 'to'=>$to[0]]; + } + } + + // Only send the DATA command if we have viable recipients + if ((count($this->all_recipients) > count($bad_rcpt)) && !$this->smtp->data($header . $body)) { + throw new Exception($this->lang('data_not_accepted'), self::STOP_CRITICAL); + } + + $smtp_transaction_id = $this->smtp->getLastTransactionID(); + + if ($this->SMTPKeepAlive) { + $this->smtp->reset(); + } else { + $this->smtp->quit(); + $this->smtp->close(); + } + + foreach ($callbacks as $cb) { + $this->doCallback( + $cb['issent'], + [$cb['to']], + [], + [], + $this->Subject, + $body, + $this->From, + ['smtp_transaction_id' => $smtp_transaction_id] + ); + } + + //Create error message for any bad addresses + if (count($bad_rcpt) > 0) { + $errstr = ''; + foreach ($bad_rcpt as $bad) { + $errstr .= $bad['to'] . ': ' . $bad['error']; + } + throw new Exception($this->lang('recipients_failed') . $errstr, self::STOP_CONTINUE); + } + + return true; + } + + /** + * Initiate a connection to an SMTP server. + * Returns false if the operation failed. + * + * @param array $options An array of options compatible with stream_context_create() + * + * @throws Exception + * + * @uses \PHPMailer\PHPMailer\SMTP + * + * @return bool + */ + public function smtpConnect($options = null) + { + if (null === $this->smtp) { + $this->smtp = $this->getSMTPInstance(); + } + + //If no options are provided, use whatever is set in the instance + if (null === $options) { + $options = $this->SMTPOptions; + } + + // Already connected? + if ($this->smtp->connected()) { + return true; + } + + $this->smtp->setTimeout($this->Timeout); + $this->smtp->setDebugLevel($this->SMTPDebug); + $this->smtp->setDebugOutput($this->Debugoutput); + $this->smtp->setVerp($this->do_verp); + $hosts = explode(';', $this->Host); + $lastexception = null; + + foreach ($hosts as $hostentry) { + $hostinfo = []; + if (!preg_match( + '/^(?:(ssl|tls):\/\/)?(.+?)(?::(\d+))?$/', + trim($hostentry), + $hostinfo + )) { + $this->edebug($this->lang('invalid_hostentry') . ' ' . trim($hostentry)); + // Not a valid host entry + continue; + } + // $hostinfo[1]: optional ssl or tls prefix + // $hostinfo[2]: the hostname + // $hostinfo[3]: optional port number + // The host string prefix can temporarily override the current setting for SMTPSecure + // If it's not specified, the default value is used + + //Check the host name is a valid name or IP address before trying to use it + if (!static::isValidHost($hostinfo[2])) { + $this->edebug($this->lang('invalid_host') . ' ' . $hostinfo[2]); + continue; + } + $prefix = ''; + $secure = $this->SMTPSecure; + $tls = (static::ENCRYPTION_STARTTLS === $this->SMTPSecure); + if ('ssl' === $hostinfo[1] || ('' === $hostinfo[1] && static::ENCRYPTION_SMTPS === $this->SMTPSecure)) { + $prefix = 'ssl://'; + $tls = false; // Can't have SSL and TLS at the same time + $secure = static::ENCRYPTION_SMTPS; + } elseif ('tls' === $hostinfo[1]) { + $tls = true; + // tls doesn't use a prefix + $secure = static::ENCRYPTION_STARTTLS; + } + //Do we need the OpenSSL extension? + $sslext = defined('OPENSSL_ALGO_SHA256'); + if (static::ENCRYPTION_STARTTLS === $secure || static::ENCRYPTION_SMTPS === $secure) { + //Check for an OpenSSL constant rather than using extension_loaded, which is sometimes disabled + if (!$sslext) { + throw new Exception($this->lang('extension_missing') . 'openssl', self::STOP_CRITICAL); + } + } + $host = $hostinfo[2]; + $port = $this->Port; + if (array_key_exists(3, $hostinfo) && is_numeric($hostinfo[3]) && $hostinfo[3] > 0 && $hostinfo[3] < 65536) { + $port = (int) $hostinfo[3]; + } + if ($this->smtp->connect($prefix . $host, $port, $this->Timeout, $options)) { + try { + if ($this->Helo) { + $hello = $this->Helo; + } else { + $hello = $this->serverHostname(); + } + $this->smtp->hello($hello); + //Automatically enable TLS encryption if: + // * it's not disabled + // * we have openssl extension + // * we are not already using SSL + // * the server offers STARTTLS + if ($this->SMTPAutoTLS && $sslext && 'ssl' !== $secure && $this->smtp->getServerExt('STARTTLS')) { + $tls = true; + } + if ($tls) { + if (!$this->smtp->startTLS()) { + throw new Exception($this->lang('connect_host')); + } + // We must resend EHLO after TLS negotiation + $this->smtp->hello($hello); + } + if ($this->SMTPAuth && !$this->smtp->authenticate( + $this->Username, + $this->Password, + $this->AuthType, + $this->oauth + )) { + throw new Exception($this->lang('authenticate')); + } + + return true; + } catch (Exception $exc) { + $lastexception = $exc; + $this->edebug($exc->getMessage()); + // We must have connected, but then failed TLS or Auth, so close connection nicely + $this->smtp->quit(); + } + } + } + // If we get here, all connection attempts have failed, so close connection hard + $this->smtp->close(); + // As we've caught all exceptions, just report whatever the last one was + if ($this->exceptions && null !== $lastexception) { + throw $lastexception; + } + + return false; + } + + /** + * Close the active SMTP session if one exists. + */ + public function smtpClose() + { + if ((null !== $this->smtp) && $this->smtp->connected()) { + $this->smtp->quit(); + $this->smtp->close(); + } + } + + /** + * Set the language for error messages. + * Returns false if it cannot load the language file. + * The default language is English. + * + * @param string $langcode ISO 639-1 2-character language code (e.g. French is "fr") + * @param string $lang_path Path to the language file directory, with trailing separator (slash) + * + * @return bool + */ + public function setLanguage($langcode = 'en', $lang_path = '') + { + // Backwards compatibility for renamed language codes + $renamed_langcodes = [ + 'br' => 'pt_br', + 'cz' => 'cs', + 'dk' => 'da', + 'no' => 'nb', + 'se' => 'sv', + 'rs' => 'sr', + 'tg' => 'tl', + ]; + + if (isset($renamed_langcodes[$langcode])) { + $langcode = $renamed_langcodes[$langcode]; + } + + // Define full set of translatable strings in English + $PHPMAILER_LANG = [ + 'authenticate' => 'SMTP Error: Could not authenticate.', + 'connect_host' => 'SMTP Error: Could not connect to SMTP host.', + 'data_not_accepted' => 'SMTP Error: data not accepted.', + 'empty_message' => 'Message body empty', + 'encoding' => 'Unknown encoding: ', + 'execute' => 'Could not execute: ', + 'file_access' => 'Could not access file: ', + 'file_open' => 'File Error: Could not open file: ', + 'from_failed' => 'The following From address failed: ', + 'instantiate' => 'Could not instantiate mail function.', + 'invalid_address' => 'Invalid address: ', + 'invalid_hostentry' => 'Invalid hostentry: ', + 'invalid_host' => 'Invalid host: ', + 'mailer_not_supported' => ' mailer is not supported.', + 'provide_address' => 'You must provide at least one recipient email address.', + 'recipients_failed' => 'SMTP Error: The following recipients failed: ', + 'signing' => 'Signing Error: ', + 'smtp_connect_failed' => 'SMTP connect() failed.', + 'smtp_error' => 'SMTP server error: ', + 'variable_set' => 'Cannot set or reset variable: ', + 'extension_missing' => 'Extension missing: ', + ]; + if (empty($lang_path)) { + // Calculate an absolute path so it can work if CWD is not here + $lang_path = dirname(__DIR__) . DIRECTORY_SEPARATOR . 'language' . DIRECTORY_SEPARATOR; + } + //Validate $langcode + if (!preg_match('/^[a-z]{2}(?:_[a-zA-Z]{2})?$/', $langcode)) { + $langcode = 'en'; + } + $foundlang = true; + $lang_file = $lang_path . 'phpmailer.lang-' . $langcode . '.php'; + // There is no English translation file + if ('en' !== $langcode) { + // Make sure language file path is readable + if (!static::isPermittedPath($lang_file) || !file_exists($lang_file)) { + $foundlang = false; + } else { + // Overwrite language-specific strings. + // This way we'll never have missing translation keys. + $foundlang = include $lang_file; + } + } + $this->language = $PHPMAILER_LANG; + + return (bool) $foundlang; // Returns false if language not found + } + + /** + * Get the array of strings for the current language. + * + * @return array + */ + public function getTranslations() + { + return $this->language; + } + + /** + * Create recipient headers. + * + * @param string $type + * @param array $addr An array of recipients, + * where each recipient is a 2-element indexed array with element 0 containing an address + * and element 1 containing a name, like: + * [['joe@example.com', 'Joe User'], ['zoe@example.com', 'Zoe User']] + * + * @return string + */ + public function addrAppend($type, $addr) + { + $addresses = []; + foreach ($addr as $address) { + $addresses[] = $this->addrFormat($address); + } + + return $type . ': ' . implode(', ', $addresses) . static::$LE; + } + + /** + * Format an address for use in a message header. + * + * @param array $addr A 2-element indexed array, element 0 containing an address, element 1 containing a name like + * ['joe@example.com', 'Joe User'] + * + * @return string + */ + public function addrFormat($addr) + { + if (empty($addr[1])) { // No name provided + return $this->secureHeader($addr[0]); + } + + return $this->encodeHeader($this->secureHeader($addr[1]), 'phrase') . + ' <' . $this->secureHeader($addr[0]) . '>'; + } + + /** + * Word-wrap message. + * For use with mailers that do not automatically perform wrapping + * and for quoted-printable encoded messages. + * Original written by philippe. + * + * @param string $message The message to wrap + * @param int $length The line length to wrap to + * @param bool $qp_mode Whether to run in Quoted-Printable mode + * + * @return string + */ + public function wrapText($message, $length, $qp_mode = false) + { + if ($qp_mode) { + $soft_break = sprintf(' =%s', static::$LE); + } else { + $soft_break = static::$LE; + } + // If utf-8 encoding is used, we will need to make sure we don't + // split multibyte characters when we wrap + $is_utf8 = static::CHARSET_UTF8 === strtolower($this->CharSet); + $lelen = strlen(static::$LE); + $crlflen = strlen(static::$LE); + + $message = static::normalizeBreaks($message); + //Remove a trailing line break + if (substr($message, -$lelen) === static::$LE) { + $message = substr($message, 0, -$lelen); + } + + //Split message into lines + $lines = explode(static::$LE, $message); + //Message will be rebuilt in here + $message = ''; + foreach ($lines as $line) { + $words = explode(' ', $line); + $buf = ''; + $firstword = true; + foreach ($words as $word) { + if ($qp_mode && (strlen($word) > $length)) { + $space_left = $length - strlen($buf) - $crlflen; + if (!$firstword) { + if ($space_left > 20) { + $len = $space_left; + if ($is_utf8) { + $len = $this->utf8CharBoundary($word, $len); + } elseif ('=' === substr($word, $len - 1, 1)) { + --$len; + } elseif ('=' === substr($word, $len - 2, 1)) { + $len -= 2; + } + $part = substr($word, 0, $len); + $word = substr($word, $len); + $buf .= ' ' . $part; + $message .= $buf . sprintf('=%s', static::$LE); + } else { + $message .= $buf . $soft_break; + } + $buf = ''; + } + while ($word !== '') { + if ($length <= 0) { + break; + } + $len = $length; + if ($is_utf8) { + $len = $this->utf8CharBoundary($word, $len); + } elseif ('=' === substr($word, $len - 1, 1)) { + --$len; + } elseif ('=' === substr($word, $len - 2, 1)) { + $len -= 2; + } + $part = substr($word, 0, $len); + $word = (string) substr($word, $len); + + if ($word !== '') { + $message .= $part . sprintf('=%s', static::$LE); + } else { + $buf = $part; + } + } + } else { + $buf_o = $buf; + if (!$firstword) { + $buf .= ' '; + } + $buf .= $word; + + if ('' !== $buf_o && strlen($buf) > $length) { + $message .= $buf_o . $soft_break; + $buf = $word; + } + } + $firstword = false; + } + $message .= $buf . static::$LE; + } + + return $message; + } + + /** + * Find the last character boundary prior to $maxLength in a utf-8 + * quoted-printable encoded string. + * Original written by Colin Brown. + * + * @param string $encodedText utf-8 QP text + * @param int $maxLength Find the last character boundary prior to this length + * + * @return int + */ + public function utf8CharBoundary($encodedText, $maxLength) + { + $foundSplitPos = false; + $lookBack = 3; + while (!$foundSplitPos) { + $lastChunk = substr($encodedText, $maxLength - $lookBack, $lookBack); + $encodedCharPos = strpos($lastChunk, '='); + if (false !== $encodedCharPos) { + // Found start of encoded character byte within $lookBack block. + // Check the encoded byte value (the 2 chars after the '=') + $hex = substr($encodedText, $maxLength - $lookBack + $encodedCharPos + 1, 2); + $dec = hexdec($hex); + if ($dec < 128) { + // Single byte character. + // If the encoded char was found at pos 0, it will fit + // otherwise reduce maxLength to start of the encoded char + if ($encodedCharPos > 0) { + $maxLength -= $lookBack - $encodedCharPos; + } + $foundSplitPos = true; + } elseif ($dec >= 192) { + // First byte of a multi byte character + // Reduce maxLength to split at start of character + $maxLength -= $lookBack - $encodedCharPos; + $foundSplitPos = true; + } elseif ($dec < 192) { + // Middle byte of a multi byte character, look further back + $lookBack += 3; + } + } else { + // No encoded character found + $foundSplitPos = true; + } + } + + return $maxLength; + } + + /** + * Apply word wrapping to the message body. + * Wraps the message body to the number of chars set in the WordWrap property. + * You should only do this to plain-text bodies as wrapping HTML tags may break them. + * This is called automatically by createBody(), so you don't need to call it yourself. + */ + public function setWordWrap() + { + if ($this->WordWrap < 1) { + return; + } + + switch ($this->message_type) { + case 'alt': + case 'alt_inline': + case 'alt_attach': + case 'alt_inline_attach': + $this->AltBody = $this->wrapText($this->AltBody, $this->WordWrap); + break; + default: + $this->Body = $this->wrapText($this->Body, $this->WordWrap); + break; + } + } + + /** + * Assemble message headers. + * + * @return string The assembled headers + */ + public function createHeader() + { + $result = ''; + + $result .= $this->headerLine('Date', '' === $this->MessageDate ? self::rfcDate() : $this->MessageDate); + + // To be created automatically by mail() + if ($this->SingleTo) { + if ('mail' !== $this->Mailer) { + foreach ($this->to as $toaddr) { + $this->SingleToArray[] = $this->addrFormat($toaddr); + } + } + } elseif (count($this->to) > 0) { + if ('mail' !== $this->Mailer) { + $result .= $this->addrAppend('To', $this->to); + } + } elseif (count($this->cc) === 0) { + $result .= $this->headerLine('To', 'undisclosed-recipients:;'); + } + + $result .= $this->addrAppend('From', [[trim($this->From), $this->FromName]]); + + // sendmail and mail() extract Cc from the header before sending + if (count($this->cc) > 0) { + $result .= $this->addrAppend('Cc', $this->cc); + } + + // sendmail and mail() extract Bcc from the header before sending + if (( + 'sendmail' === $this->Mailer || 'qmail' === $this->Mailer || 'mail' === $this->Mailer + ) + && count($this->bcc) > 0 + ) { + $result .= $this->addrAppend('Bcc', $this->bcc); + } + + if (count($this->ReplyTo) > 0) { + $result .= $this->addrAppend('Reply-To', $this->ReplyTo); + } + + // mail() sets the subject itself + if ('mail' !== $this->Mailer) { + $result .= $this->headerLine('Subject', $this->encodeHeader($this->secureHeader($this->Subject))); + } + + // Only allow a custom message ID if it conforms to RFC 5322 section 3.6.4 + // https://tools.ietf.org/html/rfc5322#section-3.6.4 + if ('' !== $this->MessageID && preg_match('/^<.*@.*>$/', $this->MessageID)) { + $this->lastMessageID = $this->MessageID; + } else { + $this->lastMessageID = sprintf('<%s@%s>', $this->uniqueid, $this->serverHostname()); + } + $result .= $this->headerLine('Message-ID', $this->lastMessageID); + if (null !== $this->Priority) { + $result .= $this->headerLine('X-Priority', $this->Priority); + } + if ('' === $this->XMailer) { + $result .= $this->headerLine( + 'X-Mailer', + 'PHPMailer ' . self::VERSION . ' (https://github.com/PHPMailer/PHPMailer)' + ); + } else { + $myXmailer = trim($this->XMailer); + if ($myXmailer) { + $result .= $this->headerLine('X-Mailer', $myXmailer); + } + } + + if ('' !== $this->ConfirmReadingTo) { + $result .= $this->headerLine('Disposition-Notification-To', '<' . $this->ConfirmReadingTo . '>'); + } + + // Add custom headers + foreach ($this->CustomHeader as $header) { + $result .= $this->headerLine( + trim($header[0]), + $this->encodeHeader(trim($header[1])) + ); + } + if (!$this->sign_key_file) { + $result .= $this->headerLine('MIME-Version', '1.0'); + $result .= $this->getMailMIME(); + } + + return $result; + } + + /** + * Get the message MIME type headers. + * + * @return string + */ + public function getMailMIME() + { + $result = ''; + $ismultipart = true; + switch ($this->message_type) { + case 'inline': + $result .= $this->headerLine('Content-Type', static::CONTENT_TYPE_MULTIPART_RELATED . ';'); + $result .= $this->textLine(' boundary="' . $this->boundary[1] . '"'); + break; + case 'attach': + case 'inline_attach': + case 'alt_attach': + case 'alt_inline_attach': + $result .= $this->headerLine('Content-Type', static::CONTENT_TYPE_MULTIPART_MIXED . ';'); + $result .= $this->textLine(' boundary="' . $this->boundary[1] . '"'); + break; + case 'alt': + case 'alt_inline': + $result .= $this->headerLine('Content-Type', static::CONTENT_TYPE_MULTIPART_ALTERNATIVE . ';'); + $result .= $this->textLine(' boundary="' . $this->boundary[1] . '"'); + break; + default: + // Catches case 'plain': and case '': + $result .= $this->textLine('Content-Type: ' . $this->ContentType . '; charset=' . $this->CharSet); + $ismultipart = false; + break; + } + // RFC1341 part 5 says 7bit is assumed if not specified + if (static::ENCODING_7BIT !== $this->Encoding) { + // RFC 2045 section 6.4 says multipart MIME parts may only use 7bit, 8bit or binary CTE + if ($ismultipart) { + if (static::ENCODING_8BIT === $this->Encoding) { + $result .= $this->headerLine('Content-Transfer-Encoding', static::ENCODING_8BIT); + } + // The only remaining alternatives are quoted-printable and base64, which are both 7bit compatible + } else { + $result .= $this->headerLine('Content-Transfer-Encoding', $this->Encoding); + } + } + + if ('mail' !== $this->Mailer) { +// $result .= static::$LE; + } + + return $result; + } + + /** + * Returns the whole MIME message. + * Includes complete headers and body. + * Only valid post preSend(). + * + * @see PHPMailer::preSend() + * + * @return string + */ + public function getSentMIMEMessage() + { + return rtrim($this->MIMEHeader . $this->mailHeader, "\n\r") . static::$LE . static::$LE . $this->MIMEBody; + } + + /** + * Create a unique ID to use for boundaries. + * + * @return string + */ + protected function generateId() + { + $len = 32; //32 bytes = 256 bits + $bytes = ''; + if (function_exists('random_bytes')) { + try { + $bytes = random_bytes($len); + } catch (\Exception $e) { + //Do nothing + } + } elseif (function_exists('openssl_random_pseudo_bytes')) { + /** @noinspection CryptographicallySecureRandomnessInspection */ + $bytes = openssl_random_pseudo_bytes($len); + } + if ($bytes === '') { + //We failed to produce a proper random string, so make do. + //Use a hash to force the length to the same as the other methods + $bytes = hash('sha256', uniqid((string) mt_rand(), true), true); + } + + //We don't care about messing up base64 format here, just want a random string + return str_replace(['=', '+', '/'], '', base64_encode(hash('sha256', $bytes, true))); + } + + /** + * Assemble the message body. + * Returns an empty string on failure. + * + * @throws Exception + * + * @return string The assembled message body + */ + public function createBody() + { + $body = ''; + //Create unique IDs and preset boundaries + $this->uniqueid = $this->generateId(); + $this->boundary[1] = 'b1_' . $this->uniqueid; + $this->boundary[2] = 'b2_' . $this->uniqueid; + $this->boundary[3] = 'b3_' . $this->uniqueid; + + if ($this->sign_key_file) { + $body .= $this->getMailMIME() . static::$LE; + } + + $this->setWordWrap(); + + $bodyEncoding = $this->Encoding; + $bodyCharSet = $this->CharSet; + //Can we do a 7-bit downgrade? + if (static::ENCODING_8BIT === $bodyEncoding && !$this->has8bitChars($this->Body)) { + $bodyEncoding = static::ENCODING_7BIT; + //All ISO 8859, Windows codepage and UTF-8 charsets are ascii compatible up to 7-bit + $bodyCharSet = static::CHARSET_ASCII; + } + //If lines are too long, and we're not already using an encoding that will shorten them, + //change to quoted-printable transfer encoding for the body part only + if (static::ENCODING_BASE64 !== $this->Encoding && static::hasLineLongerThanMax($this->Body)) { + $bodyEncoding = static::ENCODING_QUOTED_PRINTABLE; + } + + $altBodyEncoding = $this->Encoding; + $altBodyCharSet = $this->CharSet; + //Can we do a 7-bit downgrade? + if (static::ENCODING_8BIT === $altBodyEncoding && !$this->has8bitChars($this->AltBody)) { + $altBodyEncoding = static::ENCODING_7BIT; + //All ISO 8859, Windows codepage and UTF-8 charsets are ascii compatible up to 7-bit + $altBodyCharSet = static::CHARSET_ASCII; + } + //If lines are too long, and we're not already using an encoding that will shorten them, + //change to quoted-printable transfer encoding for the alt body part only + if (static::ENCODING_BASE64 !== $altBodyEncoding && static::hasLineLongerThanMax($this->AltBody)) { + $altBodyEncoding = static::ENCODING_QUOTED_PRINTABLE; + } + //Use this as a preamble in all multipart message types + $mimepre = 'This is a multi-part message in MIME format.' . static::$LE; + switch ($this->message_type) { + case 'inline': + $body .= $mimepre; + $body .= $this->getBoundary($this->boundary[1], $bodyCharSet, '', $bodyEncoding); + $body .= $this->encodeString($this->Body, $bodyEncoding); + $body .= static::$LE; + $body .= $this->attachAll('inline', $this->boundary[1]); + break; + case 'attach': + $body .= $mimepre; + $body .= $this->getBoundary($this->boundary[1], $bodyCharSet, '', $bodyEncoding); + $body .= $this->encodeString($this->Body, $bodyEncoding); + $body .= static::$LE; + $body .= $this->attachAll('attachment', $this->boundary[1]); + break; + case 'inline_attach': + $body .= $mimepre; + $body .= $this->textLine('--' . $this->boundary[1]); + $body .= $this->headerLine('Content-Type', static::CONTENT_TYPE_MULTIPART_RELATED . ';'); + $body .= $this->textLine(' boundary="' . $this->boundary[2] . '";'); + $body .= $this->textLine(' type="' . static::CONTENT_TYPE_TEXT_HTML . '"'); + $body .= static::$LE; + $body .= $this->getBoundary($this->boundary[2], $bodyCharSet, '', $bodyEncoding); + $body .= $this->encodeString($this->Body, $bodyEncoding); + $body .= static::$LE; + $body .= $this->attachAll('inline', $this->boundary[2]); + $body .= static::$LE; + $body .= $this->attachAll('attachment', $this->boundary[1]); + break; + case 'alt': + $body .= $mimepre; + $body .= $this->getBoundary( + $this->boundary[1], + $altBodyCharSet, + static::CONTENT_TYPE_PLAINTEXT, + $altBodyEncoding + ); + $body .= $this->encodeString($this->AltBody, $altBodyEncoding); + $body .= static::$LE; + $body .= $this->getBoundary( + $this->boundary[1], + $bodyCharSet, + static::CONTENT_TYPE_TEXT_HTML, + $bodyEncoding + ); + $body .= $this->encodeString($this->Body, $bodyEncoding); + $body .= static::$LE; + if (!empty($this->Ical)) { + $method = static::ICAL_METHOD_REQUEST; + foreach (static::$IcalMethods as $imethod) { + if (stripos($this->Ical, 'METHOD:' . $imethod) !== false) { + $method = $imethod; + break; + } + } + $body .= $this->getBoundary( + $this->boundary[1], + '', + static::CONTENT_TYPE_TEXT_CALENDAR . '; method=' . $method, + '' + ); + $body .= $this->encodeString($this->Ical, $this->Encoding); + $body .= static::$LE; + } + $body .= $this->endBoundary($this->boundary[1]); + break; + case 'alt_inline': + $body .= $mimepre; + $body .= $this->getBoundary( + $this->boundary[1], + $altBodyCharSet, + static::CONTENT_TYPE_PLAINTEXT, + $altBodyEncoding + ); + $body .= $this->encodeString($this->AltBody, $altBodyEncoding); + $body .= static::$LE; + $body .= $this->textLine('--' . $this->boundary[1]); + $body .= $this->headerLine('Content-Type', static::CONTENT_TYPE_MULTIPART_RELATED . ';'); + $body .= $this->textLine(' boundary="' . $this->boundary[2] . '";'); + $body .= $this->textLine(' type="' . static::CONTENT_TYPE_TEXT_HTML . '"'); + $body .= static::$LE; + $body .= $this->getBoundary( + $this->boundary[2], + $bodyCharSet, + static::CONTENT_TYPE_TEXT_HTML, + $bodyEncoding + ); + $body .= $this->encodeString($this->Body, $bodyEncoding); + $body .= static::$LE; + $body .= $this->attachAll('inline', $this->boundary[2]); + $body .= static::$LE; + $body .= $this->endBoundary($this->boundary[1]); + break; + case 'alt_attach': + $body .= $mimepre; + $body .= $this->textLine('--' . $this->boundary[1]); + $body .= $this->headerLine('Content-Type', static::CONTENT_TYPE_MULTIPART_ALTERNATIVE . ';'); + $body .= $this->textLine(' boundary="' . $this->boundary[2] . '"'); + $body .= static::$LE; + $body .= $this->getBoundary( + $this->boundary[2], + $altBodyCharSet, + static::CONTENT_TYPE_PLAINTEXT, + $altBodyEncoding + ); + $body .= $this->encodeString($this->AltBody, $altBodyEncoding); + $body .= static::$LE; + $body .= $this->getBoundary( + $this->boundary[2], + $bodyCharSet, + static::CONTENT_TYPE_TEXT_HTML, + $bodyEncoding + ); + $body .= $this->encodeString($this->Body, $bodyEncoding); + $body .= static::$LE; + if (!empty($this->Ical)) { + $method = static::ICAL_METHOD_REQUEST; + foreach (static::$IcalMethods as $imethod) { + if (stripos($this->Ical, 'METHOD:' . $imethod) !== false) { + $method = $imethod; + break; + } + } + $body .= $this->getBoundary( + $this->boundary[2], + '', + static::CONTENT_TYPE_TEXT_CALENDAR . '; method=' . $method, + '' + ); + $body .= $this->encodeString($this->Ical, $this->Encoding); + } + $body .= $this->endBoundary($this->boundary[2]); + $body .= static::$LE; + $body .= $this->attachAll('attachment', $this->boundary[1]); + break; + case 'alt_inline_attach': + $body .= $mimepre; + $body .= $this->textLine('--' . $this->boundary[1]); + $body .= $this->headerLine('Content-Type', static::CONTENT_TYPE_MULTIPART_ALTERNATIVE . ';'); + $body .= $this->textLine(' boundary="' . $this->boundary[2] . '"'); + $body .= static::$LE; + $body .= $this->getBoundary( + $this->boundary[2], + $altBodyCharSet, + static::CONTENT_TYPE_PLAINTEXT, + $altBodyEncoding + ); + $body .= $this->encodeString($this->AltBody, $altBodyEncoding); + $body .= static::$LE; + $body .= $this->textLine('--' . $this->boundary[2]); + $body .= $this->headerLine('Content-Type', static::CONTENT_TYPE_MULTIPART_RELATED . ';'); + $body .= $this->textLine(' boundary="' . $this->boundary[3] . '";'); + $body .= $this->textLine(' type="' . static::CONTENT_TYPE_TEXT_HTML . '"'); + $body .= static::$LE; + $body .= $this->getBoundary( + $this->boundary[3], + $bodyCharSet, + static::CONTENT_TYPE_TEXT_HTML, + $bodyEncoding + ); + $body .= $this->encodeString($this->Body, $bodyEncoding); + $body .= static::$LE; + $body .= $this->attachAll('inline', $this->boundary[3]); + $body .= static::$LE; + $body .= $this->endBoundary($this->boundary[2]); + $body .= static::$LE; + $body .= $this->attachAll('attachment', $this->boundary[1]); + break; + default: + // Catch case 'plain' and case '', applies to simple `text/plain` and `text/html` body content types + //Reset the `Encoding` property in case we changed it for line length reasons + $this->Encoding = $bodyEncoding; + $body .= $this->encodeString($this->Body, $this->Encoding); + break; + } + + if ($this->isError()) { + $body = ''; + if ($this->exceptions) { + throw new Exception($this->lang('empty_message'), self::STOP_CRITICAL); + } + } elseif ($this->sign_key_file) { + try { + if (!defined('PKCS7_TEXT')) { + throw new Exception($this->lang('extension_missing') . 'openssl'); + } + + $file = tempnam(sys_get_temp_dir(), 'srcsign'); + $signed = tempnam(sys_get_temp_dir(), 'mailsign'); + file_put_contents($file, $body); + + //Workaround for PHP bug https://bugs.php.net/bug.php?id=69197 + if (empty($this->sign_extracerts_file)) { + $sign = @openssl_pkcs7_sign( + $file, + $signed, + 'file://' . realpath($this->sign_cert_file), + ['file://' . realpath($this->sign_key_file), $this->sign_key_pass], + [] + ); + } else { + $sign = @openssl_pkcs7_sign( + $file, + $signed, + 'file://' . realpath($this->sign_cert_file), + ['file://' . realpath($this->sign_key_file), $this->sign_key_pass], + [], + PKCS7_DETACHED, + $this->sign_extracerts_file + ); + } + + @unlink($file); + if ($sign) { + $body = file_get_contents($signed); + @unlink($signed); + //The message returned by openssl contains both headers and body, so need to split them up + $parts = explode("\n\n", $body, 2); + $this->MIMEHeader .= $parts[0] . static::$LE . static::$LE; + $body = $parts[1]; + } else { + @unlink($signed); + throw new Exception($this->lang('signing') . openssl_error_string()); + } + } catch (Exception $exc) { + $body = ''; + if ($this->exceptions) { + throw $exc; + } + } + } + + return $body; + } + + /** + * Return the start of a message boundary. + * + * @param string $boundary + * @param string $charSet + * @param string $contentType + * @param string $encoding + * + * @return string + */ + protected function getBoundary($boundary, $charSet, $contentType, $encoding) + { + $result = ''; + if ('' === $charSet) { + $charSet = $this->CharSet; + } + if ('' === $contentType) { + $contentType = $this->ContentType; + } + if ('' === $encoding) { + $encoding = $this->Encoding; + } + $result .= $this->textLine('--' . $boundary); + $result .= sprintf('Content-Type: %s; charset=%s', $contentType, $charSet); + $result .= static::$LE; + // RFC1341 part 5 says 7bit is assumed if not specified + if (static::ENCODING_7BIT !== $encoding) { + $result .= $this->headerLine('Content-Transfer-Encoding', $encoding); + } + $result .= static::$LE; + + return $result; + } + + /** + * Return the end of a message boundary. + * + * @param string $boundary + * + * @return string + */ + protected function endBoundary($boundary) + { + return static::$LE . '--' . $boundary . '--' . static::$LE; + } + + /** + * Set the message type. + * PHPMailer only supports some preset message types, not arbitrary MIME structures. + */ + protected function setMessageType() + { + $type = []; + if ($this->alternativeExists()) { + $type[] = 'alt'; + } + if ($this->inlineImageExists()) { + $type[] = 'inline'; + } + if ($this->attachmentExists()) { + $type[] = 'attach'; + } + $this->message_type = implode('_', $type); + if ('' === $this->message_type) { + //The 'plain' message_type refers to the message having a single body element, not that it is plain-text + $this->message_type = 'plain'; + } + } + + /** + * Format a header line. + * + * @param string $name + * @param string|int $value + * + * @return string + */ + public function headerLine($name, $value) + { + return $name . ': ' . $value . static::$LE; + } + + /** + * Return a formatted mail line. + * + * @param string $value + * + * @return string + */ + public function textLine($value) + { + return $value . static::$LE; + } + + /** + * Add an attachment from a path on the filesystem. + * Never use a user-supplied path to a file! + * Returns false if the file could not be found or read. + * Explicitly *does not* support passing URLs; PHPMailer is not an HTTP client. + * If you need to do that, fetch the resource yourself and pass it in via a local file or string. + * + * @param string $path Path to the attachment + * @param string $name Overrides the attachment name + * @param string $encoding File encoding (see $Encoding) + * @param string $type File extension (MIME) type + * @param string $disposition Disposition to use + * + * @throws Exception + * + * @return bool + */ + public function addAttachment( + $path, + $name = '', + $encoding = self::ENCODING_BASE64, + $type = '', + $disposition = 'attachment' + ) { + try { + if (!static::isPermittedPath($path) || !@is_file($path)) { + throw new Exception($this->lang('file_access') . $path, self::STOP_CONTINUE); + } + + // If a MIME type is not specified, try to work it out from the file name + if ('' === $type) { + $type = static::filenameToType($path); + } + + $filename = (string) static::mb_pathinfo($path, PATHINFO_BASENAME); + if ('' === $name) { + $name = $filename; + } + + if (!$this->validateEncoding($encoding)) { + throw new Exception($this->lang('encoding') . $encoding); + } + + $this->attachment[] = [ + 0 => $path, + 1 => $filename, + 2 => $name, + 3 => $encoding, + 4 => $type, + 5 => false, // isStringAttachment + 6 => $disposition, + 7 => $name, + ]; + } catch (Exception $exc) { + $this->setError($exc->getMessage()); + $this->edebug($exc->getMessage()); + if ($this->exceptions) { + throw $exc; + } + + return false; + } + + return true; + } + + /** + * Return the array of attachments. + * + * @return array + */ + public function getAttachments() + { + return $this->attachment; + } + + /** + * Attach all file, string, and binary attachments to the message. + * Returns an empty string on failure. + * + * @param string $disposition_type + * @param string $boundary + * + * @throws Exception + * + * @return string + */ + protected function attachAll($disposition_type, $boundary) + { + // Return text of body + $mime = []; + $cidUniq = []; + $incl = []; + + // Add all attachments + foreach ($this->attachment as $attachment) { + // Check if it is a valid disposition_filter + if ($attachment[6] === $disposition_type) { + // Check for string attachment + $string = ''; + $path = ''; + $bString = $attachment[5]; + if ($bString) { + $string = $attachment[0]; + } else { + $path = $attachment[0]; + } + + $inclhash = hash('sha256', serialize($attachment)); + if (in_array($inclhash, $incl, true)) { + continue; + } + $incl[] = $inclhash; + $name = $attachment[2]; + $encoding = $attachment[3]; + $type = $attachment[4]; + $disposition = $attachment[6]; + $cid = $attachment[7]; + if ('inline' === $disposition && array_key_exists($cid, $cidUniq)) { + continue; + } + $cidUniq[$cid] = true; + + $mime[] = sprintf('--%s%s', $boundary, static::$LE); + //Only include a filename property if we have one + if (!empty($name)) { + $mime[] = sprintf( + 'Content-Type: %s; name="%s"%s', + $type, + $this->encodeHeader($this->secureHeader($name)), + static::$LE + ); + } else { + $mime[] = sprintf( + 'Content-Type: %s%s', + $type, + static::$LE + ); + } + // RFC1341 part 5 says 7bit is assumed if not specified + if (static::ENCODING_7BIT !== $encoding) { + $mime[] = sprintf('Content-Transfer-Encoding: %s%s', $encoding, static::$LE); + } + + //Only set Content-IDs on inline attachments + if ((string) $cid !== '' && $disposition === 'inline') { + $mime[] = 'Content-ID: <' . $this->encodeHeader($this->secureHeader($cid)) . '>' . static::$LE; + } + + // If a filename contains any of these chars, it should be quoted, + // but not otherwise: RFC2183 & RFC2045 5.1 + // Fixes a warning in IETF's msglint MIME checker + // Allow for bypassing the Content-Disposition header totally + if (!empty($disposition)) { + $encoded_name = $this->encodeHeader($this->secureHeader($name)); + if (preg_match('/[ ()<>@,;:"\/\[\]?=]/', $encoded_name)) { + $mime[] = sprintf( + 'Content-Disposition: %s; filename="%s"%s', + $disposition, + $encoded_name, + static::$LE . static::$LE + ); + } elseif (!empty($encoded_name)) { + $mime[] = sprintf( + 'Content-Disposition: %s; filename=%s%s', + $disposition, + $encoded_name, + static::$LE . static::$LE + ); + } else { + $mime[] = sprintf( + 'Content-Disposition: %s%s', + $disposition, + static::$LE . static::$LE + ); + } + } else { + $mime[] = static::$LE; + } + + // Encode as string attachment + if ($bString) { + $mime[] = $this->encodeString($string, $encoding); + } else { + $mime[] = $this->encodeFile($path, $encoding); + } + if ($this->isError()) { + return ''; + } + $mime[] = static::$LE; + } + } + + $mime[] = sprintf('--%s--%s', $boundary, static::$LE); + + return implode('', $mime); + } + + /** + * Encode a file attachment in requested format. + * Returns an empty string on failure. + * + * @param string $path The full path to the file + * @param string $encoding The encoding to use; one of 'base64', '7bit', '8bit', 'binary', 'quoted-printable' + * + * @return string + */ + protected function encodeFile($path, $encoding = self::ENCODING_BASE64) + { + try { + if (!static::isPermittedPath($path) || !file_exists($path)) { + throw new Exception($this->lang('file_open') . $path, self::STOP_CONTINUE); + } + $file_buffer = file_get_contents($path); + if (false === $file_buffer) { + throw new Exception($this->lang('file_open') . $path, self::STOP_CONTINUE); + } + $file_buffer = $this->encodeString($file_buffer, $encoding); + + return $file_buffer; + } catch (Exception $exc) { + $this->setError($exc->getMessage()); + + return ''; + } + } + + /** + * Encode a string in requested format. + * Returns an empty string on failure. + * + * @param string $str The text to encode + * @param string $encoding The encoding to use; one of 'base64', '7bit', '8bit', 'binary', 'quoted-printable' + * + * @throws Exception + * + * @return string + */ + public function encodeString($str, $encoding = self::ENCODING_BASE64) + { + $encoded = ''; + switch (strtolower($encoding)) { + case static::ENCODING_BASE64: + $encoded = chunk_split( + base64_encode($str), + static::STD_LINE_LENGTH, + static::$LE + ); + break; + case static::ENCODING_7BIT: + case static::ENCODING_8BIT: + $encoded = static::normalizeBreaks($str); + // Make sure it ends with a line break + if (substr($encoded, -(strlen(static::$LE))) !== static::$LE) { + $encoded .= static::$LE; + } + break; + case static::ENCODING_BINARY: + $encoded = $str; + break; + case static::ENCODING_QUOTED_PRINTABLE: + $encoded = $this->encodeQP($str); + break; + default: + $this->setError($this->lang('encoding') . $encoding); + if ($this->exceptions) { + throw new Exception($this->lang('encoding') . $encoding); + } + break; + } + + return $encoded; + } + + /** + * Encode a header value (not including its label) optimally. + * Picks shortest of Q, B, or none. Result includes folding if needed. + * See RFC822 definitions for phrase, comment and text positions. + * + * @param string $str The header value to encode + * @param string $position What context the string will be used in + * + * @return string + */ + public function encodeHeader($str, $position = 'text') + { + $matchcount = 0; + switch (strtolower($position)) { + case 'phrase': + if (!preg_match('/[\200-\377]/', $str)) { + // Can't use addslashes as we don't know the value of magic_quotes_sybase + $encoded = addcslashes($str, "\0..\37\177\\\""); + if (($str === $encoded) && !preg_match('/[^A-Za-z0-9!#$%&\'*+\/=?^_`{|}~ -]/', $str)) { + return $encoded; + } + + return "\"$encoded\""; + } + $matchcount = preg_match_all('/[^\040\041\043-\133\135-\176]/', $str, $matches); + break; + /* @noinspection PhpMissingBreakStatementInspection */ + case 'comment': + $matchcount = preg_match_all('/[()"]/', $str, $matches); + //fallthrough + case 'text': + default: + $matchcount += preg_match_all('/[\000-\010\013\014\016-\037\177-\377]/', $str, $matches); + break; + } + + if ($this->has8bitChars($str)) { + $charset = $this->CharSet; + } else { + $charset = static::CHARSET_ASCII; + } + + // Q/B encoding adds 8 chars and the charset ("` =??[QB]??=`"). + $overhead = 8 + strlen($charset); + + if ('mail' === $this->Mailer) { + $maxlen = static::MAIL_MAX_LINE_LENGTH - $overhead; + } else { + $maxlen = static::MAX_LINE_LENGTH - $overhead; + } + + // Select the encoding that produces the shortest output and/or prevents corruption. + if ($matchcount > strlen($str) / 3) { + // More than 1/3 of the content needs encoding, use B-encode. + $encoding = 'B'; + } elseif ($matchcount > 0) { + // Less than 1/3 of the content needs encoding, use Q-encode. + $encoding = 'Q'; + } elseif (strlen($str) > $maxlen) { + // No encoding needed, but value exceeds max line length, use Q-encode to prevent corruption. + $encoding = 'Q'; + } else { + // No reformatting needed + $encoding = false; + } + + switch ($encoding) { + case 'B': + if ($this->hasMultiBytes($str)) { + // Use a custom function which correctly encodes and wraps long + // multibyte strings without breaking lines within a character + $encoded = $this->base64EncodeWrapMB($str, "\n"); + } else { + $encoded = base64_encode($str); + $maxlen -= $maxlen % 4; + $encoded = trim(chunk_split($encoded, $maxlen, "\n")); + } + $encoded = preg_replace('/^(.*)$/m', ' =?' . $charset . "?$encoding?\\1?=", $encoded); + break; + case 'Q': + $encoded = $this->encodeQ($str, $position); + $encoded = $this->wrapText($encoded, $maxlen, true); + $encoded = str_replace('=' . static::$LE, "\n", trim($encoded)); + $encoded = preg_replace('/^(.*)$/m', ' =?' . $charset . "?$encoding?\\1?=", $encoded); + break; + default: + return $str; + } + + return trim(static::normalizeBreaks($encoded)); + } + + /** + * Check if a string contains multi-byte characters. + * + * @param string $str multi-byte text to wrap encode + * + * @return bool + */ + public function hasMultiBytes($str) + { + if (function_exists('mb_strlen')) { + return strlen($str) > mb_strlen($str, $this->CharSet); + } + + // Assume no multibytes (we can't handle without mbstring functions anyway) + return false; + } + + /** + * Does a string contain any 8-bit chars (in any charset)? + * + * @param string $text + * + * @return bool + */ + public function has8bitChars($text) + { + return (bool) preg_match('/[\x80-\xFF]/', $text); + } + + /** + * Encode and wrap long multibyte strings for mail headers + * without breaking lines within a character. + * Adapted from a function by paravoid. + * + * @see http://www.php.net/manual/en/function.mb-encode-mimeheader.php#60283 + * + * @param string $str multi-byte text to wrap encode + * @param string $linebreak string to use as linefeed/end-of-line + * + * @return string + */ + public function base64EncodeWrapMB($str, $linebreak = null) + { + $start = '=?' . $this->CharSet . '?B?'; + $end = '?='; + $encoded = ''; + if (null === $linebreak) { + $linebreak = static::$LE; + } + + $mb_length = mb_strlen($str, $this->CharSet); + // Each line must have length <= 75, including $start and $end + $length = 75 - strlen($start) - strlen($end); + // Average multi-byte ratio + $ratio = $mb_length / strlen($str); + // Base64 has a 4:3 ratio + $avgLength = floor($length * $ratio * .75); + + $offset = 0; + for ($i = 0; $i < $mb_length; $i += $offset) { + $lookBack = 0; + do { + $offset = $avgLength - $lookBack; + $chunk = mb_substr($str, $i, $offset, $this->CharSet); + $chunk = base64_encode($chunk); + ++$lookBack; + } while (strlen($chunk) > $length); + $encoded .= $chunk . $linebreak; + } + + // Chomp the last linefeed + return substr($encoded, 0, -strlen($linebreak)); + } + + /** + * Encode a string in quoted-printable format. + * According to RFC2045 section 6.7. + * + * @param string $string The text to encode + * + * @return string + */ + public function encodeQP($string) + { + return static::normalizeBreaks(quoted_printable_encode($string)); + } + + /** + * Encode a string using Q encoding. + * + * @see http://tools.ietf.org/html/rfc2047#section-4.2 + * + * @param string $str the text to encode + * @param string $position Where the text is going to be used, see the RFC for what that means + * + * @return string + */ + public function encodeQ($str, $position = 'text') + { + // There should not be any EOL in the string + $pattern = ''; + $encoded = str_replace(["\r", "\n"], '', $str); + switch (strtolower($position)) { + case 'phrase': + // RFC 2047 section 5.3 + $pattern = '^A-Za-z0-9!*+\/ -'; + break; + /* + * RFC 2047 section 5.2. + * Build $pattern without including delimiters and [] + */ + /* @noinspection PhpMissingBreakStatementInspection */ + case 'comment': + $pattern = '\(\)"'; + /* Intentional fall through */ + case 'text': + default: + // RFC 2047 section 5.1 + // Replace every high ascii, control, =, ? and _ characters + $pattern = '\000-\011\013\014\016-\037\075\077\137\177-\377' . $pattern; + break; + } + $matches = []; + if (preg_match_all("/[{$pattern}]/", $encoded, $matches)) { + // If the string contains an '=', make sure it's the first thing we replace + // so as to avoid double-encoding + $eqkey = array_search('=', $matches[0], true); + if (false !== $eqkey) { + unset($matches[0][$eqkey]); + array_unshift($matches[0], '='); + } + foreach (array_unique($matches[0]) as $char) { + $encoded = str_replace($char, '=' . sprintf('%02X', ord($char)), $encoded); + } + } + // Replace spaces with _ (more readable than =20) + // RFC 2047 section 4.2(2) + return str_replace(' ', '_', $encoded); + } + + /** + * Add a string or binary attachment (non-filesystem). + * This method can be used to attach ascii or binary data, + * such as a BLOB record from a database. + * + * @param string $string String attachment data + * @param string $filename Name of the attachment + * @param string $encoding File encoding (see $Encoding) + * @param string $type File extension (MIME) type + * @param string $disposition Disposition to use + * + * @throws Exception + * + * @return bool True on successfully adding an attachment + */ + public function addStringAttachment( + $string, + $filename, + $encoding = self::ENCODING_BASE64, + $type = '', + $disposition = 'attachment' + ) { + try { + // If a MIME type is not specified, try to work it out from the file name + if ('' === $type) { + $type = static::filenameToType($filename); + } + + if (!$this->validateEncoding($encoding)) { + throw new Exception($this->lang('encoding') . $encoding); + } + + // Append to $attachment array + $this->attachment[] = [ + 0 => $string, + 1 => $filename, + 2 => static::mb_pathinfo($filename, PATHINFO_BASENAME), + 3 => $encoding, + 4 => $type, + 5 => true, // isStringAttachment + 6 => $disposition, + 7 => 0, + ]; + } catch (Exception $exc) { + $this->setError($exc->getMessage()); + $this->edebug($exc->getMessage()); + if ($this->exceptions) { + throw $exc; + } + + return false; + } + + return true; + } + + /** + * Add an embedded (inline) attachment from a file. + * This can include images, sounds, and just about any other document type. + * These differ from 'regular' attachments in that they are intended to be + * displayed inline with the message, not just attached for download. + * This is used in HTML messages that embed the images + * the HTML refers to using the $cid value. + * Never use a user-supplied path to a file! + * + * @param string $path Path to the attachment + * @param string $cid Content ID of the attachment; Use this to reference + * the content when using an embedded image in HTML + * @param string $name Overrides the attachment name + * @param string $encoding File encoding (see $Encoding) + * @param string $type File MIME type + * @param string $disposition Disposition to use + * + * @throws Exception + * + * @return bool True on successfully adding an attachment + */ + public function addEmbeddedImage( + $path, + $cid, + $name = '', + $encoding = self::ENCODING_BASE64, + $type = '', + $disposition = 'inline' + ) { + try { + if (!static::isPermittedPath($path) || !@is_file($path)) { + throw new Exception($this->lang('file_access') . $path, self::STOP_CONTINUE); + } + + // If a MIME type is not specified, try to work it out from the file name + if ('' === $type) { + $type = static::filenameToType($path); + } + + if (!$this->validateEncoding($encoding)) { + throw new Exception($this->lang('encoding') . $encoding); + } + + $filename = (string) static::mb_pathinfo($path, PATHINFO_BASENAME); + if ('' === $name) { + $name = $filename; + } + + // Append to $attachment array + $this->attachment[] = [ + 0 => $path, + 1 => $filename, + 2 => $name, + 3 => $encoding, + 4 => $type, + 5 => false, // isStringAttachment + 6 => $disposition, + 7 => $cid, + ]; + } catch (Exception $exc) { + $this->setError($exc->getMessage()); + $this->edebug($exc->getMessage()); + if ($this->exceptions) { + throw $exc; + } + + return false; + } + + return true; + } + + /** + * Add an embedded stringified attachment. + * This can include images, sounds, and just about any other document type. + * If your filename doesn't contain an extension, be sure to set the $type to an appropriate MIME type. + * + * @param string $string The attachment binary data + * @param string $cid Content ID of the attachment; Use this to reference + * the content when using an embedded image in HTML + * @param string $name A filename for the attachment. If this contains an extension, + * PHPMailer will attempt to set a MIME type for the attachment. + * For example 'file.jpg' would get an 'image/jpeg' MIME type. + * @param string $encoding File encoding (see $Encoding), defaults to 'base64' + * @param string $type MIME type - will be used in preference to any automatically derived type + * @param string $disposition Disposition to use + * + * @throws Exception + * + * @return bool True on successfully adding an attachment + */ + public function addStringEmbeddedImage( + $string, + $cid, + $name = '', + $encoding = self::ENCODING_BASE64, + $type = '', + $disposition = 'inline' + ) { + try { + // If a MIME type is not specified, try to work it out from the name + if ('' === $type && !empty($name)) { + $type = static::filenameToType($name); + } + + if (!$this->validateEncoding($encoding)) { + throw new Exception($this->lang('encoding') . $encoding); + } + + // Append to $attachment array + $this->attachment[] = [ + 0 => $string, + 1 => $name, + 2 => $name, + 3 => $encoding, + 4 => $type, + 5 => true, // isStringAttachment + 6 => $disposition, + 7 => $cid, + ]; + } catch (Exception $exc) { + $this->setError($exc->getMessage()); + $this->edebug($exc->getMessage()); + if ($this->exceptions) { + throw $exc; + } + + return false; + } + + return true; + } + + /** + * Validate encodings. + * + * @param string $encoding + * + * @return bool + */ + protected function validateEncoding($encoding) + { + return in_array( + $encoding, + [ + self::ENCODING_7BIT, + self::ENCODING_QUOTED_PRINTABLE, + self::ENCODING_BASE64, + self::ENCODING_8BIT, + self::ENCODING_BINARY, + ], + true + ); + } + + /** + * Check if an embedded attachment is present with this cid. + * + * @param string $cid + * + * @return bool + */ + protected function cidExists($cid) + { + foreach ($this->attachment as $attachment) { + if ('inline' === $attachment[6] && $cid === $attachment[7]) { + return true; + } + } + + return false; + } + + /** + * Check if an inline attachment is present. + * + * @return bool + */ + public function inlineImageExists() + { + foreach ($this->attachment as $attachment) { + if ('inline' === $attachment[6]) { + return true; + } + } + + return false; + } + + /** + * Check if an attachment (non-inline) is present. + * + * @return bool + */ + public function attachmentExists() + { + foreach ($this->attachment as $attachment) { + if ('attachment' === $attachment[6]) { + return true; + } + } + + return false; + } + + /** + * Check if this message has an alternative body set. + * + * @return bool + */ + public function alternativeExists() + { + return !empty($this->AltBody); + } + + /** + * Clear queued addresses of given kind. + * + * @param string $kind 'to', 'cc', or 'bcc' + */ + public function clearQueuedAddresses($kind) + { + $this->RecipientsQueue = array_filter( + $this->RecipientsQueue, + static function ($params) use ($kind) { + return $params[0] !== $kind; + } + ); + } + + /** + * Clear all To recipients. + */ + public function clearAddresses() + { + foreach ($this->to as $to) { + unset($this->all_recipients[strtolower($to[0])]); + } + $this->to = []; + $this->clearQueuedAddresses('to'); + } + + /** + * Clear all CC recipients. + */ + public function clearCCs() + { + foreach ($this->cc as $cc) { + unset($this->all_recipients[strtolower($cc[0])]); + } + $this->cc = []; + $this->clearQueuedAddresses('cc'); + } + + /** + * Clear all BCC recipients. + */ + public function clearBCCs() + { + foreach ($this->bcc as $bcc) { + unset($this->all_recipients[strtolower($bcc[0])]); + } + $this->bcc = []; + $this->clearQueuedAddresses('bcc'); + } + + /** + * Clear all ReplyTo recipients. + */ + public function clearReplyTos() + { + $this->ReplyTo = []; + $this->ReplyToQueue = []; + } + + /** + * Clear all recipient types. + */ + public function clearAllRecipients() + { + $this->to = []; + $this->cc = []; + $this->bcc = []; + $this->all_recipients = []; + $this->RecipientsQueue = []; + } + + /** + * Clear all filesystem, string, and binary attachments. + */ + public function clearAttachments() + { + $this->attachment = []; + } + + /** + * Clear all custom headers. + */ + public function clearCustomHeaders() + { + $this->CustomHeader = []; + } + + /** + * Add an error message to the error container. + * + * @param string $msg + */ + protected function setError($msg) + { + ++$this->error_count; + if ('smtp' === $this->Mailer && null !== $this->smtp) { + $lasterror = $this->smtp->getError(); + if (!empty($lasterror['error'])) { + $msg .= $this->lang('smtp_error') . $lasterror['error']; + if (!empty($lasterror['detail'])) { + $msg .= ' Detail: ' . $lasterror['detail']; + } + if (!empty($lasterror['smtp_code'])) { + $msg .= ' SMTP code: ' . $lasterror['smtp_code']; + } + if (!empty($lasterror['smtp_code_ex'])) { + $msg .= ' Additional SMTP info: ' . $lasterror['smtp_code_ex']; + } + } + } + $this->ErrorInfo = $msg; + } + + /** + * Return an RFC 822 formatted date. + * + * @return string + */ + public static function rfcDate() + { + // Set the time zone to whatever the default is to avoid 500 errors + // Will default to UTC if it's not set properly in php.ini + date_default_timezone_set(@date_default_timezone_get()); + + return date('D, j M Y H:i:s O'); + } + + /** + * Get the server hostname. + * Returns 'localhost.localdomain' if unknown. + * + * @return string + */ + protected function serverHostname() + { + $result = ''; + if (!empty($this->Hostname)) { + $result = $this->Hostname; + } elseif (isset($_SERVER) && array_key_exists('SERVER_NAME', $_SERVER)) { + $result = $_SERVER['SERVER_NAME']; + } elseif (function_exists('gethostname') && gethostname() !== false) { + $result = gethostname(); + } elseif (php_uname('n') !== false) { + $result = php_uname('n'); + } + if (!static::isValidHost($result)) { + return 'localhost.localdomain'; + } + + return $result; + } + + /** + * Validate whether a string contains a valid value to use as a hostname or IP address. + * IPv6 addresses must include [], e.g. `[::1]`, not just `::1`. + * + * @param string $host The host name or IP address to check + * + * @return bool + */ + public static function isValidHost($host) + { + //Simple syntax limits + if (empty($host) + || !is_string($host) + || strlen($host) > 256 + || !preg_match('/^([a-zA-Z\d.-]*|\[[a-fA-F\d:]+])$/', $host) + ) { + return false; + } + //Looks like a bracketed IPv6 address + if (strlen($host) > 2 && substr($host, 0, 1) === '[' && substr($host, -1, 1) === ']') { + return filter_var(substr($host, 1, -1), FILTER_VALIDATE_IP, FILTER_FLAG_IPV6) !== false; + } + //If removing all the dots results in a numeric string, it must be an IPv4 address. + //Need to check this first because otherwise things like `999.0.0.0` are considered valid host names + if (is_numeric(str_replace('.', '', $host))) { + //Is it a valid IPv4 address? + return filter_var($host, FILTER_VALIDATE_IP, FILTER_FLAG_IPV4) !== false; + } + if (filter_var('http://' . $host, FILTER_VALIDATE_URL) !== false) { + //Is it a syntactically valid hostname? + return true; + } + + return false; + } + + /** + * Get an error message in the current language. + * + * @param string $key + * + * @return string + */ + protected function lang($key) + { + if (count($this->language) < 1) { + $this->setLanguage(); // set the default language + } + + if (array_key_exists($key, $this->language)) { + if ('smtp_connect_failed' === $key) { + //Include a link to troubleshooting docs on SMTP connection failure + //this is by far the biggest cause of support questions + //but it's usually not PHPMailer's fault. + return $this->language[$key] . ' https://github.com/PHPMailer/PHPMailer/wiki/Troubleshooting'; + } + + return $this->language[$key]; + } + + //Return the key as a fallback + return $key; + } + + /** + * Check if an error occurred. + * + * @return bool True if an error did occur + */ + public function isError() + { + return $this->error_count > 0; + } + + /** + * Add a custom header. + * $name value can be overloaded to contain + * both header name and value (name:value). + * + * @param string $name Custom header name + * @param string|null $value Header value + */ + public function addCustomHeader($name, $value = null) + { + if (null === $value) { + // Value passed in as name:value + $this->CustomHeader[] = explode(':', $name, 2); + } else { + $this->CustomHeader[] = [$name, $value]; + } + } + + /** + * Returns all custom headers. + * + * @return array + */ + public function getCustomHeaders() + { + return $this->CustomHeader; + } + + /** + * Create a message body from an HTML string. + * Automatically inlines images and creates a plain-text version by converting the HTML, + * overwriting any existing values in Body and AltBody. + * Do not source $message content from user input! + * $basedir is prepended when handling relative URLs, e.g. and must not be empty + * will look for an image file in $basedir/images/a.png and convert it to inline. + * If you don't provide a $basedir, relative paths will be left untouched (and thus probably break in email) + * Converts data-uri images into embedded attachments. + * If you don't want to apply these transformations to your HTML, just set Body and AltBody directly. + * + * @param string $message HTML message string + * @param string $basedir Absolute path to a base directory to prepend to relative paths to images + * @param bool|callable $advanced Whether to use the internal HTML to text converter + * or your own custom converter @return string $message The transformed message Body + * + * @throws Exception + * + * @see PHPMailer::html2text() + */ + public function msgHTML($message, $basedir = '', $advanced = false) + { + preg_match_all('/(? 1 && '/' !== substr($basedir, -1)) { + // Ensure $basedir has a trailing / + $basedir .= '/'; + } + foreach ($images[2] as $imgindex => $url) { + // Convert data URIs into embedded images + //e.g. "data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==" + if (preg_match('#^data:(image/(?:jpe?g|gif|png));?(base64)?,(.+)#', $url, $match)) { + if (count($match) === 4 && static::ENCODING_BASE64 === $match[2]) { + $data = base64_decode($match[3]); + } elseif ('' === $match[2]) { + $data = rawurldecode($match[3]); + } else { + //Not recognised so leave it alone + continue; + } + //Hash the decoded data, not the URL, so that the same data-URI image used in multiple places + //will only be embedded once, even if it used a different encoding + $cid = substr(hash('sha256', $data), 0, 32) . '@phpmailer.0'; // RFC2392 S 2 + + if (!$this->cidExists($cid)) { + $this->addStringEmbeddedImage( + $data, + $cid, + 'embed' . $imgindex, + static::ENCODING_BASE64, + $match[1] + ); + } + $message = str_replace( + $images[0][$imgindex], + $images[1][$imgindex] . '="cid:' . $cid . '"', + $message + ); + continue; + } + if (// Only process relative URLs if a basedir is provided (i.e. no absolute local paths) + !empty($basedir) + // Ignore URLs containing parent dir traversal (..) + && (strpos($url, '..') === false) + // Do not change urls that are already inline images + && 0 !== strpos($url, 'cid:') + // Do not change absolute URLs, including anonymous protocol + && !preg_match('#^[a-z][a-z0-9+.-]*:?//#i', $url) + ) { + $filename = static::mb_pathinfo($url, PATHINFO_BASENAME); + $directory = dirname($url); + if ('.' === $directory) { + $directory = ''; + } + // RFC2392 S 2 + $cid = substr(hash('sha256', $url), 0, 32) . '@phpmailer.0'; + if (strlen($basedir) > 1 && '/' !== substr($basedir, -1)) { + $basedir .= '/'; + } + if (strlen($directory) > 1 && '/' !== substr($directory, -1)) { + $directory .= '/'; + } + if ($this->addEmbeddedImage( + $basedir . $directory . $filename, + $cid, + $filename, + static::ENCODING_BASE64, + static::_mime_types((string) static::mb_pathinfo($filename, PATHINFO_EXTENSION)) + ) + ) { + $message = preg_replace( + '/' . $images[1][$imgindex] . '=["\']' . preg_quote($url, '/') . '["\']/Ui', + $images[1][$imgindex] . '="cid:' . $cid . '"', + $message + ); + } + } + } + } + $this->isHTML(); + // Convert all message body line breaks to LE, makes quoted-printable encoding work much better + $this->Body = static::normalizeBreaks($message); + $this->AltBody = static::normalizeBreaks($this->html2text($message, $advanced)); + if (!$this->alternativeExists()) { + $this->AltBody = 'This is an HTML-only message. To view it, activate HTML in your email application.' + . static::$LE; + } + + return $this->Body; + } + + /** + * Convert an HTML string into plain text. + * This is used by msgHTML(). + * Note - older versions of this function used a bundled advanced converter + * which was removed for license reasons in #232. + * Example usage: + * + * ```php + * // Use default conversion + * $plain = $mail->html2text($html); + * // Use your own custom converter + * $plain = $mail->html2text($html, function($html) { + * $converter = new MyHtml2text($html); + * return $converter->get_text(); + * }); + * ``` + * + * @param string $html The HTML text to convert + * @param bool|callable $advanced Any boolean value to use the internal converter, + * or provide your own callable for custom conversion + * + * @return string + */ + public function html2text($html, $advanced = false) + { + if (is_callable($advanced)) { + return $advanced($html); + } + + return html_entity_decode( + trim(strip_tags(preg_replace('/<(head|title|style|script)[^>]*>.*?<\/\\1>/si', '', $html))), + ENT_QUOTES, + $this->CharSet + ); + } + + /** + * Get the MIME type for a file extension. + * + * @param string $ext File extension + * + * @return string MIME type of file + */ + public static function _mime_types($ext = '') + { + $mimes = [ + 'xl' => 'application/excel', + 'js' => 'application/javascript', + 'hqx' => 'application/mac-binhex40', + 'cpt' => 'application/mac-compactpro', + 'bin' => 'application/macbinary', + 'doc' => 'application/msword', + 'word' => 'application/msword', + 'xlsx' => 'application/vnd.openxmlformats-officedocument.spreadsheetml.sheet', + 'xltx' => 'application/vnd.openxmlformats-officedocument.spreadsheetml.template', + 'potx' => 'application/vnd.openxmlformats-officedocument.presentationml.template', + 'ppsx' => 'application/vnd.openxmlformats-officedocument.presentationml.slideshow', + 'pptx' => 'application/vnd.openxmlformats-officedocument.presentationml.presentation', + 'sldx' => 'application/vnd.openxmlformats-officedocument.presentationml.slide', + 'docx' => 'application/vnd.openxmlformats-officedocument.wordprocessingml.document', + 'dotx' => 'application/vnd.openxmlformats-officedocument.wordprocessingml.template', + 'xlam' => 'application/vnd.ms-excel.addin.macroEnabled.12', + 'xlsb' => 'application/vnd.ms-excel.sheet.binary.macroEnabled.12', + 'class' => 'application/octet-stream', + 'dll' => 'application/octet-stream', + 'dms' => 'application/octet-stream', + 'exe' => 'application/octet-stream', + 'lha' => 'application/octet-stream', + 'lzh' => 'application/octet-stream', + 'psd' => 'application/octet-stream', + 'sea' => 'application/octet-stream', + 'so' => 'application/octet-stream', + 'oda' => 'application/oda', + 'pdf' => 'application/pdf', + 'ai' => 'application/postscript', + 'eps' => 'application/postscript', + 'ps' => 'application/postscript', + 'smi' => 'application/smil', + 'smil' => 'application/smil', + 'mif' => 'application/vnd.mif', + 'xls' => 'application/vnd.ms-excel', + 'ppt' => 'application/vnd.ms-powerpoint', + 'wbxml' => 'application/vnd.wap.wbxml', + 'wmlc' => 'application/vnd.wap.wmlc', + 'dcr' => 'application/x-director', + 'dir' => 'application/x-director', + 'dxr' => 'application/x-director', + 'dvi' => 'application/x-dvi', + 'gtar' => 'application/x-gtar', + 'php3' => 'application/x-httpd-php', + 'php4' => 'application/x-httpd-php', + 'php' => 'application/x-httpd-php', + 'phtml' => 'application/x-httpd-php', + 'phps' => 'application/x-httpd-php-source', + 'swf' => 'application/x-shockwave-flash', + 'sit' => 'application/x-stuffit', + 'tar' => 'application/x-tar', + 'tgz' => 'application/x-tar', + 'xht' => 'application/xhtml+xml', + 'xhtml' => 'application/xhtml+xml', + 'zip' => 'application/zip', + 'mid' => 'audio/midi', + 'midi' => 'audio/midi', + 'mp2' => 'audio/mpeg', + 'mp3' => 'audio/mpeg', + 'm4a' => 'audio/mp4', + 'mpga' => 'audio/mpeg', + 'aif' => 'audio/x-aiff', + 'aifc' => 'audio/x-aiff', + 'aiff' => 'audio/x-aiff', + 'ram' => 'audio/x-pn-realaudio', + 'rm' => 'audio/x-pn-realaudio', + 'rpm' => 'audio/x-pn-realaudio-plugin', + 'ra' => 'audio/x-realaudio', + 'wav' => 'audio/x-wav', + 'mka' => 'audio/x-matroska', + 'bmp' => 'image/bmp', + 'gif' => 'image/gif', + 'jpeg' => 'image/jpeg', + 'jpe' => 'image/jpeg', + 'jpg' => 'image/jpeg', + 'png' => 'image/png', + 'tiff' => 'image/tiff', + 'tif' => 'image/tiff', + 'webp' => 'image/webp', + 'heif' => 'image/heif', + 'heifs' => 'image/heif-sequence', + 'heic' => 'image/heic', + 'heics' => 'image/heic-sequence', + 'eml' => 'message/rfc822', + 'css' => 'text/css', + 'html' => 'text/html', + 'htm' => 'text/html', + 'shtml' => 'text/html', + 'log' => 'text/plain', + 'text' => 'text/plain', + 'txt' => 'text/plain', + 'rtx' => 'text/richtext', + 'rtf' => 'text/rtf', + 'vcf' => 'text/vcard', + 'vcard' => 'text/vcard', + 'ics' => 'text/calendar', + 'xml' => 'text/xml', + 'xsl' => 'text/xml', + 'wmv' => 'video/x-ms-wmv', + 'mpeg' => 'video/mpeg', + 'mpe' => 'video/mpeg', + 'mpg' => 'video/mpeg', + 'mp4' => 'video/mp4', + 'm4v' => 'video/mp4', + 'mov' => 'video/quicktime', + 'qt' => 'video/quicktime', + 'rv' => 'video/vnd.rn-realvideo', + 'avi' => 'video/x-msvideo', + 'movie' => 'video/x-sgi-movie', + 'webm' => 'video/webm', + 'mkv' => 'video/x-matroska', + ]; + $ext = strtolower($ext); + if (array_key_exists($ext, $mimes)) { + return $mimes[$ext]; + } + + return 'application/octet-stream'; + } + + /** + * Map a file name to a MIME type. + * Defaults to 'application/octet-stream', i.e.. arbitrary binary data. + * + * @param string $filename A file name or full path, does not need to exist as a file + * + * @return string + */ + public static function filenameToType($filename) + { + // In case the path is a URL, strip any query string before getting extension + $qpos = strpos($filename, '?'); + if (false !== $qpos) { + $filename = substr($filename, 0, $qpos); + } + $ext = static::mb_pathinfo($filename, PATHINFO_EXTENSION); + + return static::_mime_types($ext); + } + + /** + * Multi-byte-safe pathinfo replacement. + * Drop-in replacement for pathinfo(), but multibyte- and cross-platform-safe. + * + * @see http://www.php.net/manual/en/function.pathinfo.php#107461 + * + * @param string $path A filename or path, does not need to exist as a file + * @param int|string $options Either a PATHINFO_* constant, + * or a string name to return only the specified piece + * + * @return string|array + */ + public static function mb_pathinfo($path, $options = null) + { + $ret = ['dirname' => '', 'basename' => '', 'extension' => '', 'filename' => '']; + $pathinfo = []; + if (preg_match('#^(.*?)[\\\\/]*(([^/\\\\]*?)(\.([^.\\\\/]+?)|))[\\\\/.]*$#m', $path, $pathinfo)) { + if (array_key_exists(1, $pathinfo)) { + $ret['dirname'] = $pathinfo[1]; + } + if (array_key_exists(2, $pathinfo)) { + $ret['basename'] = $pathinfo[2]; + } + if (array_key_exists(5, $pathinfo)) { + $ret['extension'] = $pathinfo[5]; + } + if (array_key_exists(3, $pathinfo)) { + $ret['filename'] = $pathinfo[3]; + } + } + switch ($options) { + case PATHINFO_DIRNAME: + case 'dirname': + return $ret['dirname']; + case PATHINFO_BASENAME: + case 'basename': + return $ret['basename']; + case PATHINFO_EXTENSION: + case 'extension': + return $ret['extension']; + case PATHINFO_FILENAME: + case 'filename': + return $ret['filename']; + default: + return $ret; + } + } + + /** + * Set or reset instance properties. + * You should avoid this function - it's more verbose, less efficient, more error-prone and + * harder to debug than setting properties directly. + * Usage Example: + * `$mail->set('SMTPSecure', static::ENCRYPTION_STARTTLS);` + * is the same as: + * `$mail->SMTPSecure = static::ENCRYPTION_STARTTLS;`. + * + * @param string $name The property name to set + * @param mixed $value The value to set the property to + * + * @return bool + */ + public function set($name, $value = '') + { + if (property_exists($this, $name)) { + $this->$name = $value; + + return true; + } + $this->setError($this->lang('variable_set') . $name); + + return false; + } + + /** + * Strip newlines to prevent header injection. + * + * @param string $str + * + * @return string + */ + public function secureHeader($str) + { + return trim(str_replace(["\r", "\n"], '', $str)); + } + + /** + * Normalize line breaks in a string. + * Converts UNIX LF, Mac CR and Windows CRLF line breaks into a single line break format. + * Defaults to CRLF (for message bodies) and preserves consecutive breaks. + * + * @param string $text + * @param string $breaktype What kind of line break to use; defaults to static::$LE + * + * @return string + */ + public static function normalizeBreaks($text, $breaktype = null) + { + if (null === $breaktype) { + $breaktype = static::$LE; + } + // Normalise to \n + $text = str_replace(["\r\n", "\r"], "\n", $text); + // Now convert LE as needed + if ("\n" !== $breaktype) { + $text = str_replace("\n", $breaktype, $text); + } + + return $text; + } + + /** + * Return the current line break format string. + * + * @return string + */ + public static function getLE() + { + return static::$LE; + } + + /** + * Set the line break format string, e.g. "\r\n". + * + * @param string $le + */ + protected static function setLE($le) + { + static::$LE = $le; + } + + /** + * Set the public and private key files and password for S/MIME signing. + * + * @param string $cert_filename + * @param string $key_filename + * @param string $key_pass Password for private key + * @param string $extracerts_filename Optional path to chain certificate + */ + public function sign($cert_filename, $key_filename, $key_pass, $extracerts_filename = '') + { + $this->sign_cert_file = $cert_filename; + $this->sign_key_file = $key_filename; + $this->sign_key_pass = $key_pass; + $this->sign_extracerts_file = $extracerts_filename; + } + + /** + * Quoted-Printable-encode a DKIM header. + * + * @param string $txt + * + * @return string + */ + public function DKIM_QP($txt) + { + $line = ''; + $len = strlen($txt); + for ($i = 0; $i < $len; ++$i) { + $ord = ord($txt[$i]); + if (((0x21 <= $ord) && ($ord <= 0x3A)) || $ord === 0x3C || ((0x3E <= $ord) && ($ord <= 0x7E))) { + $line .= $txt[$i]; + } else { + $line .= '=' . sprintf('%02X', $ord); + } + } + + return $line; + } + + /** + * Generate a DKIM signature. + * + * @param string $signHeader + * + * @throws Exception + * + * @return string The DKIM signature value + */ + public function DKIM_Sign($signHeader) + { + if (!defined('PKCS7_TEXT')) { + if ($this->exceptions) { + throw new Exception($this->lang('extension_missing') . 'openssl'); + } + + return ''; + } + $privKeyStr = !empty($this->DKIM_private_string) ? + $this->DKIM_private_string : + file_get_contents($this->DKIM_private); + if ('' !== $this->DKIM_passphrase) { + $privKey = openssl_pkey_get_private($privKeyStr, $this->DKIM_passphrase); + } else { + $privKey = openssl_pkey_get_private($privKeyStr); + } + if (openssl_sign($signHeader, $signature, $privKey, 'sha256WithRSAEncryption')) { + openssl_pkey_free($privKey); + + return base64_encode($signature); + } + openssl_pkey_free($privKey); + + return ''; + } + + /** + * Generate a DKIM canonicalization header. + * Uses the 'relaxed' algorithm from RFC6376 section 3.4.2. + * Canonicalized headers should *always* use CRLF, regardless of mailer setting. + * + * @see https://tools.ietf.org/html/rfc6376#section-3.4.2 + * + * @param string $signHeader Header + * + * @return string + */ + public function DKIM_HeaderC($signHeader) + { + //Note PCRE \s is too broad a definition of whitespace; RFC5322 defines it as `[ \t]` + //@see https://tools.ietf.org/html/rfc5322#section-2.2 + //That means this may break if you do something daft like put vertical tabs in your headers. + //Unfold header lines + $signHeader = preg_replace('/\r\n[ \t]+/', ' ', $signHeader); + //Break headers out into an array + $lines = explode("\r\n", $signHeader); + foreach ($lines as $key => $line) { + //If the header is missing a :, skip it as it's invalid + //This is likely to happen because the explode() above will also split + //on the trailing LE, leaving an empty line + if (strpos($line, ':') === false) { + continue; + } + list($heading, $value) = explode(':', $line, 2); + //Lower-case header name + $heading = strtolower($heading); + //Collapse white space within the value, also convert WSP to space + $value = preg_replace('/[ \t]+/', ' ', $value); + //RFC6376 is slightly unclear here - it says to delete space at the *end* of each value + //But then says to delete space before and after the colon. + //Net result is the same as trimming both ends of the value. + //By elimination, the same applies to the field name + $lines[$key] = trim($heading, " \t") . ':' . trim($value, " \t"); + } + + return implode("\r\n", $lines); + } + + /** + * Generate a DKIM canonicalization body. + * Uses the 'simple' algorithm from RFC6376 section 3.4.3. + * Canonicalized bodies should *always* use CRLF, regardless of mailer setting. + * + * @see https://tools.ietf.org/html/rfc6376#section-3.4.3 + * + * @param string $body Message Body + * + * @return string + */ + public function DKIM_BodyC($body) + { + if (empty($body)) { + return "\r\n"; + } + // Normalize line endings to CRLF + $body = static::normalizeBreaks($body, "\r\n"); + + //Reduce multiple trailing line breaks to a single one + return rtrim($body, "\r\n") . "\r\n"; + } + + /** + * Create the DKIM header and body in a new message header. + * + * @param string $headers_line Header lines + * @param string $subject Subject + * @param string $body Body + * + * @throws Exception + * + * @return string + */ + public function DKIM_Add($headers_line, $subject, $body) + { + $DKIMsignatureType = 'rsa-sha256'; // Signature & hash algorithms + $DKIMcanonicalization = 'relaxed/simple'; // Canonicalization methods of header & body + $DKIMquery = 'dns/txt'; // Query method + $DKIMtime = time(); + //Always sign these headers without being asked + $autoSignHeaders = [ + 'From', + 'To', + 'CC', + 'Date', + 'Subject', + 'Reply-To', + 'Message-ID', + 'Content-Type', + 'Mime-Version', + 'X-Mailer', + ]; + if (stripos($headers_line, 'Subject') === false) { + $headers_line .= 'Subject: ' . $subject . static::$LE; + } + $headerLines = explode(static::$LE, $headers_line); + $currentHeaderLabel = ''; + $currentHeaderValue = ''; + $parsedHeaders = []; + $headerLineIndex = 0; + $headerLineCount = count($headerLines); + foreach ($headerLines as $headerLine) { + $matches = []; + if (preg_match('/^([^ \t]*?)(?::[ \t]*)(.*)$/', $headerLine, $matches)) { + if ($currentHeaderLabel !== '') { + //We were previously in another header; This is the start of a new header, so save the previous one + $parsedHeaders[] = ['label' => $currentHeaderLabel, 'value' => $currentHeaderValue]; + } + $currentHeaderLabel = $matches[1]; + $currentHeaderValue = $matches[2]; + } elseif (preg_match('/^[ \t]+(.*)$/', $headerLine, $matches)) { + //This is a folded continuation of the current header, so unfold it + $currentHeaderValue .= ' ' . $matches[1]; + } + ++$headerLineIndex; + if ($headerLineIndex >= $headerLineCount) { + //This was the last line, so finish off this header + $parsedHeaders[] = ['label' => $currentHeaderLabel, 'value' => $currentHeaderValue]; + } + } + $copiedHeaders = []; + $headersToSignKeys = []; + $headersToSign = []; + foreach ($parsedHeaders as $header) { + //Is this header one that must be included in the DKIM signature? + if (in_array($header['label'], $autoSignHeaders, true)) { + $headersToSignKeys[] = $header['label']; + $headersToSign[] = $header['label'] . ': ' . $header['value']; + if ($this->DKIM_copyHeaderFields) { + $copiedHeaders[] = $header['label'] . ':' . //Note no space after this, as per RFC + str_replace('|', '=7C', $this->DKIM_QP($header['value'])); + } + continue; + } + //Is this an extra custom header we've been asked to sign? + if (in_array($header['label'], $this->DKIM_extraHeaders, true)) { + //Find its value in custom headers + foreach ($this->CustomHeader as $customHeader) { + if ($customHeader[0] === $header['label']) { + $headersToSignKeys[] = $header['label']; + $headersToSign[] = $header['label'] . ': ' . $header['value']; + if ($this->DKIM_copyHeaderFields) { + $copiedHeaders[] = $header['label'] . ':' . //Note no space after this, as per RFC + str_replace('|', '=7C', $this->DKIM_QP($header['value'])); + } + //Skip straight to the next header + continue 2; + } + } + } + } + $copiedHeaderFields = ''; + if ($this->DKIM_copyHeaderFields && count($copiedHeaders) > 0) { + //Assemble a DKIM 'z' tag + $copiedHeaderFields = ' z='; + $first = true; + foreach ($copiedHeaders as $copiedHeader) { + if (!$first) { + $copiedHeaderFields .= static::$LE . ' |'; + } + //Fold long values + if (strlen($copiedHeader) > self::STD_LINE_LENGTH - 3) { + $copiedHeaderFields .= substr( + chunk_split($copiedHeader, self::STD_LINE_LENGTH - 3, static::$LE . ' '), + 0, + -strlen(static::$LE . ' ') + ); + } else { + $copiedHeaderFields .= $copiedHeader; + } + $first = false; + } + $copiedHeaderFields .= ';' . static::$LE; + } + $headerKeys = ' h=' . implode(':', $headersToSignKeys) . ';' . static::$LE; + $headerValues = implode(static::$LE, $headersToSign); + $body = $this->DKIM_BodyC($body); + $DKIMlen = strlen($body); // Length of body + $DKIMb64 = base64_encode(pack('H*', hash('sha256', $body))); // Base64 of packed binary SHA-256 hash of body + $ident = ''; + if ('' !== $this->DKIM_identity) { + $ident = ' i=' . $this->DKIM_identity . ';' . static::$LE; + } + //The DKIM-Signature header is included in the signature *except for* the value of the `b` tag + //which is appended after calculating the signature + //https://tools.ietf.org/html/rfc6376#section-3.5 + $dkimSignatureHeader = 'DKIM-Signature: v=1;' . + ' d=' . $this->DKIM_domain . ';' . + ' s=' . $this->DKIM_selector . ';' . static::$LE . + ' a=' . $DKIMsignatureType . ';' . + ' q=' . $DKIMquery . ';' . + ' l=' . $DKIMlen . ';' . + ' t=' . $DKIMtime . ';' . + ' c=' . $DKIMcanonicalization . ';' . static::$LE . + $headerKeys . + $ident . + $copiedHeaderFields . + ' bh=' . $DKIMb64 . ';' . static::$LE . + ' b='; + //Canonicalize the set of headers + $canonicalizedHeaders = $this->DKIM_HeaderC( + $headerValues . static::$LE . $dkimSignatureHeader + ); + $signature = $this->DKIM_Sign($canonicalizedHeaders); + $signature = trim(chunk_split($signature, self::STD_LINE_LENGTH - 3, static::$LE . ' ')); + + return static::normalizeBreaks($dkimSignatureHeader . $signature) . static::$LE; + } + + /** + * Detect if a string contains a line longer than the maximum line length + * allowed by RFC 2822 section 2.1.1. + * + * @param string $str + * + * @return bool + */ + public static function hasLineLongerThanMax($str) + { + return (bool) preg_match('/^(.{' . (self::MAX_LINE_LENGTH + strlen(static::$LE)) . ',})/m', $str); + } + + /** + * Allows for public read access to 'to' property. + * Before the send() call, queued addresses (i.e. with IDN) are not yet included. + * + * @return array + */ + public function getToAddresses() + { + return $this->to; + } + + /** + * Allows for public read access to 'cc' property. + * Before the send() call, queued addresses (i.e. with IDN) are not yet included. + * + * @return array + */ + public function getCcAddresses() + { + return $this->cc; + } + + /** + * Allows for public read access to 'bcc' property. + * Before the send() call, queued addresses (i.e. with IDN) are not yet included. + * + * @return array + */ + public function getBccAddresses() + { + return $this->bcc; + } + + /** + * Allows for public read access to 'ReplyTo' property. + * Before the send() call, queued addresses (i.e. with IDN) are not yet included. + * + * @return array + */ + public function getReplyToAddresses() + { + return $this->ReplyTo; + } + + /** + * Allows for public read access to 'all_recipients' property. + * Before the send() call, queued addresses (i.e. with IDN) are not yet included. + * + * @return array + */ + public function getAllRecipientAddresses() + { + return $this->all_recipients; + } + + /** + * Perform a callback. + * + * @param bool $isSent + * @param array $to + * @param array $cc + * @param array $bcc + * @param string $subject + * @param string $body + * @param string $from + * @param array $extra + */ + protected function doCallback($isSent, $to, $cc, $bcc, $subject, $body, $from, $extra) + { + if (!empty($this->action_function) && is_callable($this->action_function)) { + call_user_func($this->action_function, $isSent, $to, $cc, $bcc, $subject, $body, $from, $extra); + } + } + + /** + * Get the OAuth instance. + * + * @return OAuth + */ + public function getOAuth() + { + return $this->oauth; + } + + /** + * Set an OAuth instance. + */ + public function setOAuth(OAuth $oauth) + { + $this->oauth = $oauth; + } +} diff --git a/vendor/phpmailer/phpmailer/src/POP3.php b/vendor/phpmailer/phpmailer/src/POP3.php new file mode 100644 index 00000000..50d5f0c2 --- /dev/null +++ b/vendor/phpmailer/phpmailer/src/POP3.php @@ -0,0 +1,419 @@ + + * @author Jim Jagielski (jimjag) + * @author Andy Prevost (codeworxtech) + * @author Brent R. Matzelle (original founder) + * @copyright 2012 - 2019 Marcus Bointon + * @copyright 2010 - 2012 Jim Jagielski + * @copyright 2004 - 2009 Andy Prevost + * @license http://www.gnu.org/copyleft/lesser.html GNU Lesser General Public License + * @note This program is distributed in the hope that it will be useful - WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. + */ + +namespace PHPMailer\PHPMailer; + +/** + * PHPMailer POP-Before-SMTP Authentication Class. + * Specifically for PHPMailer to use for RFC1939 POP-before-SMTP authentication. + * 1) This class does not support APOP authentication. + * 2) Opening and closing lots of POP3 connections can be quite slow. If you need + * to send a batch of emails then just perform the authentication once at the start, + * and then loop through your mail sending script. Providing this process doesn't + * take longer than the verification period lasts on your POP3 server, you should be fine. + * 3) This is really ancient technology; you should only need to use it to talk to very old systems. + * 4) This POP3 class is deliberately lightweight and incomplete, implementing just + * enough to do authentication. + * If you want a more complete class there are other POP3 classes for PHP available. + * + * @author Richard Davey (original author) + * @author Marcus Bointon (Synchro/coolbru) + * @author Jim Jagielski (jimjag) + * @author Andy Prevost (codeworxtech) + */ +class POP3 +{ + /** + * The POP3 PHPMailer Version number. + * + * @var string + */ + const VERSION = '6.1.4'; + + /** + * Default POP3 port number. + * + * @var int + */ + const DEFAULT_PORT = 110; + + /** + * Default timeout in seconds. + * + * @var int + */ + const DEFAULT_TIMEOUT = 30; + + /** + * Debug display level. + * Options: 0 = no, 1+ = yes. + * + * @var int + */ + public $do_debug = 0; + + /** + * POP3 mail server hostname. + * + * @var string + */ + public $host; + + /** + * POP3 port number. + * + * @var int + */ + public $port; + + /** + * POP3 Timeout Value in seconds. + * + * @var int + */ + public $tval; + + /** + * POP3 username. + * + * @var string + */ + public $username; + + /** + * POP3 password. + * + * @var string + */ + public $password; + + /** + * Resource handle for the POP3 connection socket. + * + * @var resource + */ + protected $pop_conn; + + /** + * Are we connected? + * + * @var bool + */ + protected $connected = false; + + /** + * Error container. + * + * @var array + */ + protected $errors = []; + + /** + * Line break constant. + */ + const LE = "\r\n"; + + /** + * Simple static wrapper for all-in-one POP before SMTP. + * + * @param string $host The hostname to connect to + * @param int|bool $port The port number to connect to + * @param int|bool $timeout The timeout value + * @param string $username + * @param string $password + * @param int $debug_level + * + * @return bool + */ + public static function popBeforeSmtp( + $host, + $port = false, + $timeout = false, + $username = '', + $password = '', + $debug_level = 0 + ) { + $pop = new self(); + + return $pop->authorise($host, $port, $timeout, $username, $password, $debug_level); + } + + /** + * Authenticate with a POP3 server. + * A connect, login, disconnect sequence + * appropriate for POP-before SMTP authorisation. + * + * @param string $host The hostname to connect to + * @param int|bool $port The port number to connect to + * @param int|bool $timeout The timeout value + * @param string $username + * @param string $password + * @param int $debug_level + * + * @return bool + */ + public function authorise($host, $port = false, $timeout = false, $username = '', $password = '', $debug_level = 0) + { + $this->host = $host; + // If no port value provided, use default + if (false === $port) { + $this->port = static::DEFAULT_PORT; + } else { + $this->port = (int) $port; + } + // If no timeout value provided, use default + if (false === $timeout) { + $this->tval = static::DEFAULT_TIMEOUT; + } else { + $this->tval = (int) $timeout; + } + $this->do_debug = $debug_level; + $this->username = $username; + $this->password = $password; + // Reset the error log + $this->errors = []; + // connect + $result = $this->connect($this->host, $this->port, $this->tval); + if ($result) { + $login_result = $this->login($this->username, $this->password); + if ($login_result) { + $this->disconnect(); + + return true; + } + } + // We need to disconnect regardless of whether the login succeeded + $this->disconnect(); + + return false; + } + + /** + * Connect to a POP3 server. + * + * @param string $host + * @param int|bool $port + * @param int $tval + * + * @return bool + */ + public function connect($host, $port = false, $tval = 30) + { + // Are we already connected? + if ($this->connected) { + return true; + } + + //On Windows this will raise a PHP Warning error if the hostname doesn't exist. + //Rather than suppress it with @fsockopen, capture it cleanly instead + set_error_handler([$this, 'catchWarning']); + + if (false === $port) { + $port = static::DEFAULT_PORT; + } + + // connect to the POP3 server + $this->pop_conn = fsockopen( + $host, // POP3 Host + $port, // Port # + $errno, // Error Number + $errstr, // Error Message + $tval + ); // Timeout (seconds) + // Restore the error handler + restore_error_handler(); + + // Did we connect? + if (false === $this->pop_conn) { + // It would appear not... + $this->setError( + "Failed to connect to server $host on port $port. errno: $errno; errstr: $errstr" + ); + + return false; + } + + // Increase the stream time-out + stream_set_timeout($this->pop_conn, $tval, 0); + + // Get the POP3 server response + $pop3_response = $this->getResponse(); + // Check for the +OK + if ($this->checkResponse($pop3_response)) { + // The connection is established and the POP3 server is talking + $this->connected = true; + + return true; + } + + return false; + } + + /** + * Log in to the POP3 server. + * Does not support APOP (RFC 2828, 4949). + * + * @param string $username + * @param string $password + * + * @return bool + */ + public function login($username = '', $password = '') + { + if (!$this->connected) { + $this->setError('Not connected to POP3 server'); + } + if (empty($username)) { + $username = $this->username; + } + if (empty($password)) { + $password = $this->password; + } + + // Send the Username + $this->sendString("USER $username" . static::LE); + $pop3_response = $this->getResponse(); + if ($this->checkResponse($pop3_response)) { + // Send the Password + $this->sendString("PASS $password" . static::LE); + $pop3_response = $this->getResponse(); + if ($this->checkResponse($pop3_response)) { + return true; + } + } + + return false; + } + + /** + * Disconnect from the POP3 server. + */ + public function disconnect() + { + $this->sendString('QUIT'); + //The QUIT command may cause the daemon to exit, which will kill our connection + //So ignore errors here + try { + @fclose($this->pop_conn); + } catch (Exception $e) { + //Do nothing + } + } + + /** + * Get a response from the POP3 server. + * + * @param int $size The maximum number of bytes to retrieve + * + * @return string + */ + protected function getResponse($size = 128) + { + $response = fgets($this->pop_conn, $size); + if ($this->do_debug >= 1) { + echo 'Server -> Client: ', $response; + } + + return $response; + } + + /** + * Send raw data to the POP3 server. + * + * @param string $string + * + * @return int + */ + protected function sendString($string) + { + if ($this->pop_conn) { + if ($this->do_debug >= 2) { //Show client messages when debug >= 2 + echo 'Client -> Server: ', $string; + } + + return fwrite($this->pop_conn, $string, strlen($string)); + } + + return 0; + } + + /** + * Checks the POP3 server response. + * Looks for for +OK or -ERR. + * + * @param string $string + * + * @return bool + */ + protected function checkResponse($string) + { + if (strpos($string, '+OK') !== 0) { + $this->setError("Server reported an error: $string"); + + return false; + } + + return true; + } + + /** + * Add an error to the internal error store. + * Also display debug output if it's enabled. + * + * @param string $error + */ + protected function setError($error) + { + $this->errors[] = $error; + if ($this->do_debug >= 1) { + echo '
';
+            foreach ($this->errors as $e) {
+                print_r($e);
+            }
+            echo '
'; + } + } + + /** + * Get an array of error messages, if any. + * + * @return array + */ + public function getErrors() + { + return $this->errors; + } + + /** + * POP3 connection error handler. + * + * @param int $errno + * @param string $errstr + * @param string $errfile + * @param int $errline + */ + protected function catchWarning($errno, $errstr, $errfile, $errline) + { + $this->setError( + 'Connecting to the POP3 server raised a PHP warning:' . + "errno: $errno errstr: $errstr; errfile: $errfile; errline: $errline" + ); + } +} diff --git a/vendor/phpmailer/phpmailer/src/SMTP.php b/vendor/phpmailer/phpmailer/src/SMTP.php new file mode 100644 index 00000000..c693f4d4 --- /dev/null +++ b/vendor/phpmailer/phpmailer/src/SMTP.php @@ -0,0 +1,1370 @@ + + * @author Jim Jagielski (jimjag) + * @author Andy Prevost (codeworxtech) + * @author Brent R. Matzelle (original founder) + * @copyright 2012 - 2019 Marcus Bointon + * @copyright 2010 - 2012 Jim Jagielski + * @copyright 2004 - 2009 Andy Prevost + * @license http://www.gnu.org/copyleft/lesser.html GNU Lesser General Public License + * @note This program is distributed in the hope that it will be useful - WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. + */ + +namespace PHPMailer\PHPMailer; + +/** + * PHPMailer RFC821 SMTP email transport class. + * Implements RFC 821 SMTP commands and provides some utility methods for sending mail to an SMTP server. + * + * @author Chris Ryan + * @author Marcus Bointon + */ +class SMTP +{ + /** + * The PHPMailer SMTP version number. + * + * @var string + */ + const VERSION = '6.1.4'; + + /** + * SMTP line break constant. + * + * @var string + */ + const LE = "\r\n"; + + /** + * The SMTP port to use if one is not specified. + * + * @var int + */ + const DEFAULT_PORT = 25; + + /** + * The maximum line length allowed by RFC 5321 section 4.5.3.1.6, + * *excluding* a trailing CRLF break. + * + * @see https://tools.ietf.org/html/rfc5321#section-4.5.3.1.6 + * + * @var int + */ + const MAX_LINE_LENGTH = 998; + + /** + * The maximum line length allowed for replies in RFC 5321 section 4.5.3.1.5, + * *including* a trailing CRLF line break. + * + * @see https://tools.ietf.org/html/rfc5321#section-4.5.3.1.5 + * + * @var int + */ + const MAX_REPLY_LENGTH = 512; + + /** + * Debug level for no output. + * + * @var int + */ + const DEBUG_OFF = 0; + + /** + * Debug level to show client -> server messages. + * + * @var int + */ + const DEBUG_CLIENT = 1; + + /** + * Debug level to show client -> server and server -> client messages. + * + * @var int + */ + const DEBUG_SERVER = 2; + + /** + * Debug level to show connection status, client -> server and server -> client messages. + * + * @var int + */ + const DEBUG_CONNECTION = 3; + + /** + * Debug level to show all messages. + * + * @var int + */ + const DEBUG_LOWLEVEL = 4; + + /** + * Debug output level. + * Options: + * * self::DEBUG_OFF (`0`) No debug output, default + * * self::DEBUG_CLIENT (`1`) Client commands + * * self::DEBUG_SERVER (`2`) Client commands and server responses + * * self::DEBUG_CONNECTION (`3`) As DEBUG_SERVER plus connection status + * * self::DEBUG_LOWLEVEL (`4`) Low-level data output, all messages. + * + * @var int + */ + public $do_debug = self::DEBUG_OFF; + + /** + * How to handle debug output. + * Options: + * * `echo` Output plain-text as-is, appropriate for CLI + * * `html` Output escaped, line breaks converted to `
`, appropriate for browser output + * * `error_log` Output to error log as configured in php.ini + * Alternatively, you can provide a callable expecting two params: a message string and the debug level: + * + * ```php + * $smtp->Debugoutput = function($str, $level) {echo "debug level $level; message: $str";}; + * ``` + * + * Alternatively, you can pass in an instance of a PSR-3 compatible logger, though only `debug` + * level output is used: + * + * ```php + * $mail->Debugoutput = new myPsr3Logger; + * ``` + * + * @var string|callable|\Psr\Log\LoggerInterface + */ + public $Debugoutput = 'echo'; + + /** + * Whether to use VERP. + * + * @see http://en.wikipedia.org/wiki/Variable_envelope_return_path + * @see http://www.postfix.org/VERP_README.html Info on VERP + * + * @var bool + */ + public $do_verp = false; + + /** + * The timeout value for connection, in seconds. + * Default of 5 minutes (300sec) is from RFC2821 section 4.5.3.2. + * This needs to be quite high to function correctly with hosts using greetdelay as an anti-spam measure. + * + * @see http://tools.ietf.org/html/rfc2821#section-4.5.3.2 + * + * @var int + */ + public $Timeout = 300; + + /** + * How long to wait for commands to complete, in seconds. + * Default of 5 minutes (300sec) is from RFC2821 section 4.5.3.2. + * + * @var int + */ + public $Timelimit = 300; + + /** + * Patterns to extract an SMTP transaction id from reply to a DATA command. + * The first capture group in each regex will be used as the ID. + * MS ESMTP returns the message ID, which may not be correct for internal tracking. + * + * @var string[] + */ + protected $smtp_transaction_id_patterns = [ + 'exim' => '/[\d]{3} OK id=(.*)/', + 'sendmail' => '/[\d]{3} 2.0.0 (.*) Message/', + 'postfix' => '/[\d]{3} 2.0.0 Ok: queued as (.*)/', + 'Microsoft_ESMTP' => '/[0-9]{3} 2.[\d].0 (.*)@(?:.*) Queued mail for delivery/', + 'Amazon_SES' => '/[\d]{3} Ok (.*)/', + 'SendGrid' => '/[\d]{3} Ok: queued as (.*)/', + 'CampaignMonitor' => '/[\d]{3} 2.0.0 OK:([a-zA-Z\d]{48})/', + ]; + + /** + * The last transaction ID issued in response to a DATA command, + * if one was detected. + * + * @var string|bool|null + */ + protected $last_smtp_transaction_id; + + /** + * The socket for the server connection. + * + * @var ?resource + */ + protected $smtp_conn; + + /** + * Error information, if any, for the last SMTP command. + * + * @var array + */ + protected $error = [ + 'error' => '', + 'detail' => '', + 'smtp_code' => '', + 'smtp_code_ex' => '', + ]; + + /** + * The reply the server sent to us for HELO. + * If null, no HELO string has yet been received. + * + * @var string|null + */ + protected $helo_rply; + + /** + * The set of SMTP extensions sent in reply to EHLO command. + * Indexes of the array are extension names. + * Value at index 'HELO' or 'EHLO' (according to command that was sent) + * represents the server name. In case of HELO it is the only element of the array. + * Other values can be boolean TRUE or an array containing extension options. + * If null, no HELO/EHLO string has yet been received. + * + * @var array|null + */ + protected $server_caps; + + /** + * The most recent reply received from the server. + * + * @var string + */ + protected $last_reply = ''; + + /** + * Output debugging info via a user-selected method. + * + * @param string $str Debug string to output + * @param int $level The debug level of this message; see DEBUG_* constants + * + * @see SMTP::$Debugoutput + * @see SMTP::$do_debug + */ + protected function edebug($str, $level = 0) + { + if ($level > $this->do_debug) { + return; + } + //Is this a PSR-3 logger? + if ($this->Debugoutput instanceof \Psr\Log\LoggerInterface) { + $this->Debugoutput->debug($str); + + return; + } + //Avoid clash with built-in function names + if (is_callable($this->Debugoutput) && !in_array($this->Debugoutput, ['error_log', 'html', 'echo'])) { + call_user_func($this->Debugoutput, $str, $level); + + return; + } + switch ($this->Debugoutput) { + case 'error_log': + //Don't output, just log + error_log($str); + break; + case 'html': + //Cleans up output a bit for a better looking, HTML-safe output + echo gmdate('Y-m-d H:i:s'), ' ', htmlentities( + preg_replace('/[\r\n]+/', '', $str), + ENT_QUOTES, + 'UTF-8' + ), "
\n"; + break; + case 'echo': + default: + //Normalize line breaks + $str = preg_replace('/\r\n|\r/m', "\n", $str); + echo gmdate('Y-m-d H:i:s'), + "\t", + //Trim trailing space + trim( + //Indent for readability, except for trailing break + str_replace( + "\n", + "\n \t ", + trim($str) + ) + ), + "\n"; + } + } + + /** + * Connect to an SMTP server. + * + * @param string $host SMTP server IP or host name + * @param int $port The port number to connect to + * @param int $timeout How long to wait for the connection to open + * @param array $options An array of options for stream_context_create() + * + * @return bool + */ + public function connect($host, $port = null, $timeout = 30, $options = []) + { + static $streamok; + //This is enabled by default since 5.0.0 but some providers disable it + //Check this once and cache the result + if (null === $streamok) { + $streamok = function_exists('stream_socket_client'); + } + // Clear errors to avoid confusion + $this->setError(''); + // Make sure we are __not__ connected + if ($this->connected()) { + // Already connected, generate error + $this->setError('Already connected to a server'); + + return false; + } + if (empty($port)) { + $port = self::DEFAULT_PORT; + } + // Connect to the SMTP server + $this->edebug( + "Connection: opening to $host:$port, timeout=$timeout, options=" . + (count($options) > 0 ? var_export($options, true) : 'array()'), + self::DEBUG_CONNECTION + ); + $errno = 0; + $errstr = ''; + if ($streamok) { + $socket_context = stream_context_create($options); + set_error_handler([$this, 'errorHandler']); + $this->smtp_conn = stream_socket_client( + $host . ':' . $port, + $errno, + $errstr, + $timeout, + STREAM_CLIENT_CONNECT, + $socket_context + ); + restore_error_handler(); + } else { + //Fall back to fsockopen which should work in more places, but is missing some features + $this->edebug( + 'Connection: stream_socket_client not available, falling back to fsockopen', + self::DEBUG_CONNECTION + ); + set_error_handler([$this, 'errorHandler']); + $this->smtp_conn = fsockopen( + $host, + $port, + $errno, + $errstr, + $timeout + ); + restore_error_handler(); + } + // Verify we connected properly + if (!is_resource($this->smtp_conn)) { + $this->setError( + 'Failed to connect to server', + '', + (string) $errno, + $errstr + ); + $this->edebug( + 'SMTP ERROR: ' . $this->error['error'] + . ": $errstr ($errno)", + self::DEBUG_CLIENT + ); + + return false; + } + $this->edebug('Connection: opened', self::DEBUG_CONNECTION); + // SMTP server can take longer to respond, give longer timeout for first read + // Windows does not have support for this timeout function + if (strpos(PHP_OS, 'WIN') !== 0) { + $max = (int) ini_get('max_execution_time'); + // Don't bother if unlimited + if (0 !== $max && $timeout > $max) { + @set_time_limit($timeout); + } + stream_set_timeout($this->smtp_conn, $timeout, 0); + } + // Get any announcement + $announce = $this->get_lines(); + $this->edebug('SERVER -> CLIENT: ' . $announce, self::DEBUG_SERVER); + + return true; + } + + /** + * Initiate a TLS (encrypted) session. + * + * @return bool + */ + public function startTLS() + { + if (!$this->sendCommand('STARTTLS', 'STARTTLS', 220)) { + return false; + } + + //Allow the best TLS version(s) we can + $crypto_method = STREAM_CRYPTO_METHOD_TLS_CLIENT; + + //PHP 5.6.7 dropped inclusion of TLS 1.1 and 1.2 in STREAM_CRYPTO_METHOD_TLS_CLIENT + //so add them back in manually if we can + if (defined('STREAM_CRYPTO_METHOD_TLSv1_2_CLIENT')) { + $crypto_method |= STREAM_CRYPTO_METHOD_TLSv1_2_CLIENT; + $crypto_method |= STREAM_CRYPTO_METHOD_TLSv1_1_CLIENT; + } + + // Begin encrypted connection + set_error_handler([$this, 'errorHandler']); + $crypto_ok = stream_socket_enable_crypto( + $this->smtp_conn, + true, + $crypto_method + ); + restore_error_handler(); + + return (bool) $crypto_ok; + } + + /** + * Perform SMTP authentication. + * Must be run after hello(). + * + * @see hello() + * + * @param string $username The user name + * @param string $password The password + * @param string $authtype The auth type (CRAM-MD5, PLAIN, LOGIN, XOAUTH2) + * @param OAuth $OAuth An optional OAuth instance for XOAUTH2 authentication + * + * @return bool True if successfully authenticated + */ + public function authenticate( + $username, + $password, + $authtype = null, + $OAuth = null + ) { + if (!$this->server_caps) { + $this->setError('Authentication is not allowed before HELO/EHLO'); + + return false; + } + + if (array_key_exists('EHLO', $this->server_caps)) { + // SMTP extensions are available; try to find a proper authentication method + if (!array_key_exists('AUTH', $this->server_caps)) { + $this->setError('Authentication is not allowed at this stage'); + // 'at this stage' means that auth may be allowed after the stage changes + // e.g. after STARTTLS + + return false; + } + + $this->edebug('Auth method requested: ' . ($authtype ?: 'UNSPECIFIED'), self::DEBUG_LOWLEVEL); + $this->edebug( + 'Auth methods available on the server: ' . implode(',', $this->server_caps['AUTH']), + self::DEBUG_LOWLEVEL + ); + + //If we have requested a specific auth type, check the server supports it before trying others + if (null !== $authtype && !in_array($authtype, $this->server_caps['AUTH'], true)) { + $this->edebug('Requested auth method not available: ' . $authtype, self::DEBUG_LOWLEVEL); + $authtype = null; + } + + if (empty($authtype)) { + //If no auth mechanism is specified, attempt to use these, in this order + //Try CRAM-MD5 first as it's more secure than the others + foreach (['CRAM-MD5', 'LOGIN', 'PLAIN', 'XOAUTH2'] as $method) { + if (in_array($method, $this->server_caps['AUTH'], true)) { + $authtype = $method; + break; + } + } + if (empty($authtype)) { + $this->setError('No supported authentication methods found'); + + return false; + } + $this->edebug('Auth method selected: ' . $authtype, self::DEBUG_LOWLEVEL); + } + + if (!in_array($authtype, $this->server_caps['AUTH'], true)) { + $this->setError("The requested authentication method \"$authtype\" is not supported by the server"); + + return false; + } + } elseif (empty($authtype)) { + $authtype = 'LOGIN'; + } + switch ($authtype) { + case 'PLAIN': + // Start authentication + if (!$this->sendCommand('AUTH', 'AUTH PLAIN', 334)) { + return false; + } + // Send encoded username and password + if (!$this->sendCommand( + 'User & Password', + base64_encode("\0" . $username . "\0" . $password), + 235 + ) + ) { + return false; + } + break; + case 'LOGIN': + // Start authentication + if (!$this->sendCommand('AUTH', 'AUTH LOGIN', 334)) { + return false; + } + if (!$this->sendCommand('Username', base64_encode($username), 334)) { + return false; + } + if (!$this->sendCommand('Password', base64_encode($password), 235)) { + return false; + } + break; + case 'CRAM-MD5': + // Start authentication + if (!$this->sendCommand('AUTH CRAM-MD5', 'AUTH CRAM-MD5', 334)) { + return false; + } + // Get the challenge + $challenge = base64_decode(substr($this->last_reply, 4)); + + // Build the response + $response = $username . ' ' . $this->hmac($challenge, $password); + + // send encoded credentials + return $this->sendCommand('Username', base64_encode($response), 235); + case 'XOAUTH2': + //The OAuth instance must be set up prior to requesting auth. + if (null === $OAuth) { + return false; + } + $oauth = $OAuth->getOauth64(); + + // Start authentication + if (!$this->sendCommand('AUTH', 'AUTH XOAUTH2 ' . $oauth, 235)) { + return false; + } + break; + default: + $this->setError("Authentication method \"$authtype\" is not supported"); + + return false; + } + + return true; + } + + /** + * Calculate an MD5 HMAC hash. + * Works like hash_hmac('md5', $data, $key) + * in case that function is not available. + * + * @param string $data The data to hash + * @param string $key The key to hash with + * + * @return string + */ + protected function hmac($data, $key) + { + if (function_exists('hash_hmac')) { + return hash_hmac('md5', $data, $key); + } + + // The following borrowed from + // http://php.net/manual/en/function.mhash.php#27225 + + // RFC 2104 HMAC implementation for php. + // Creates an md5 HMAC. + // Eliminates the need to install mhash to compute a HMAC + // by Lance Rushing + + $bytelen = 64; // byte length for md5 + if (strlen($key) > $bytelen) { + $key = pack('H*', md5($key)); + } + $key = str_pad($key, $bytelen, chr(0x00)); + $ipad = str_pad('', $bytelen, chr(0x36)); + $opad = str_pad('', $bytelen, chr(0x5c)); + $k_ipad = $key ^ $ipad; + $k_opad = $key ^ $opad; + + return md5($k_opad . pack('H*', md5($k_ipad . $data))); + } + + /** + * Check connection state. + * + * @return bool True if connected + */ + public function connected() + { + if (is_resource($this->smtp_conn)) { + $sock_status = stream_get_meta_data($this->smtp_conn); + if ($sock_status['eof']) { + // The socket is valid but we are not connected + $this->edebug( + 'SMTP NOTICE: EOF caught while checking if connected', + self::DEBUG_CLIENT + ); + $this->close(); + + return false; + } + + return true; // everything looks good + } + + return false; + } + + /** + * Close the socket and clean up the state of the class. + * Don't use this function without first trying to use QUIT. + * + * @see quit() + */ + public function close() + { + $this->setError(''); + $this->server_caps = null; + $this->helo_rply = null; + if (is_resource($this->smtp_conn)) { + // close the connection and cleanup + fclose($this->smtp_conn); + $this->smtp_conn = null; //Makes for cleaner serialization + $this->edebug('Connection: closed', self::DEBUG_CONNECTION); + } + } + + /** + * Send an SMTP DATA command. + * Issues a data command and sends the msg_data to the server, + * finializing the mail transaction. $msg_data is the message + * that is to be send with the headers. Each header needs to be + * on a single line followed by a with the message headers + * and the message body being separated by an additional . + * Implements RFC 821: DATA . + * + * @param string $msg_data Message data to send + * + * @return bool + */ + public function data($msg_data) + { + //This will use the standard timelimit + if (!$this->sendCommand('DATA', 'DATA', 354)) { + return false; + } + + /* The server is ready to accept data! + * According to rfc821 we should not send more than 1000 characters on a single line (including the LE) + * so we will break the data up into lines by \r and/or \n then if needed we will break each of those into + * smaller lines to fit within the limit. + * We will also look for lines that start with a '.' and prepend an additional '.'. + * NOTE: this does not count towards line-length limit. + */ + + // Normalize line breaks before exploding + $lines = explode("\n", str_replace(["\r\n", "\r"], "\n", $msg_data)); + + /* To distinguish between a complete RFC822 message and a plain message body, we check if the first field + * of the first line (':' separated) does not contain a space then it _should_ be a header and we will + * process all lines before a blank line as headers. + */ + + $field = substr($lines[0], 0, strpos($lines[0], ':')); + $in_headers = false; + if (!empty($field) && strpos($field, ' ') === false) { + $in_headers = true; + } + + foreach ($lines as $line) { + $lines_out = []; + if ($in_headers && $line === '') { + $in_headers = false; + } + //Break this line up into several smaller lines if it's too long + //Micro-optimisation: isset($str[$len]) is faster than (strlen($str) > $len), + while (isset($line[self::MAX_LINE_LENGTH])) { + //Working backwards, try to find a space within the last MAX_LINE_LENGTH chars of the line to break on + //so as to avoid breaking in the middle of a word + $pos = strrpos(substr($line, 0, self::MAX_LINE_LENGTH), ' '); + //Deliberately matches both false and 0 + if (!$pos) { + //No nice break found, add a hard break + $pos = self::MAX_LINE_LENGTH - 1; + $lines_out[] = substr($line, 0, $pos); + $line = substr($line, $pos); + } else { + //Break at the found point + $lines_out[] = substr($line, 0, $pos); + //Move along by the amount we dealt with + $line = substr($line, $pos + 1); + } + //If processing headers add a LWSP-char to the front of new line RFC822 section 3.1.1 + if ($in_headers) { + $line = "\t" . $line; + } + } + $lines_out[] = $line; + + //Send the lines to the server + foreach ($lines_out as $line_out) { + //RFC2821 section 4.5.2 + if (!empty($line_out) && $line_out[0] === '.') { + $line_out = '.' . $line_out; + } + $this->client_send($line_out . static::LE, 'DATA'); + } + } + + //Message data has been sent, complete the command + //Increase timelimit for end of DATA command + $savetimelimit = $this->Timelimit; + $this->Timelimit *= 2; + $result = $this->sendCommand('DATA END', '.', 250); + $this->recordLastTransactionID(); + //Restore timelimit + $this->Timelimit = $savetimelimit; + + return $result; + } + + /** + * Send an SMTP HELO or EHLO command. + * Used to identify the sending server to the receiving server. + * This makes sure that client and server are in a known state. + * Implements RFC 821: HELO + * and RFC 2821 EHLO. + * + * @param string $host The host name or IP to connect to + * + * @return bool + */ + public function hello($host = '') + { + //Try extended hello first (RFC 2821) + return $this->sendHello('EHLO', $host) or $this->sendHello('HELO', $host); + } + + /** + * Send an SMTP HELO or EHLO command. + * Low-level implementation used by hello(). + * + * @param string $hello The HELO string + * @param string $host The hostname to say we are + * + * @return bool + * + * @see hello() + */ + protected function sendHello($hello, $host) + { + $noerror = $this->sendCommand($hello, $hello . ' ' . $host, 250); + $this->helo_rply = $this->last_reply; + if ($noerror) { + $this->parseHelloFields($hello); + } else { + $this->server_caps = null; + } + + return $noerror; + } + + /** + * Parse a reply to HELO/EHLO command to discover server extensions. + * In case of HELO, the only parameter that can be discovered is a server name. + * + * @param string $type `HELO` or `EHLO` + */ + protected function parseHelloFields($type) + { + $this->server_caps = []; + $lines = explode("\n", $this->helo_rply); + + foreach ($lines as $n => $s) { + //First 4 chars contain response code followed by - or space + $s = trim(substr($s, 4)); + if (empty($s)) { + continue; + } + $fields = explode(' ', $s); + if (!empty($fields)) { + if (!$n) { + $name = $type; + $fields = $fields[0]; + } else { + $name = array_shift($fields); + switch ($name) { + case 'SIZE': + $fields = ($fields ? $fields[0] : 0); + break; + case 'AUTH': + if (!is_array($fields)) { + $fields = []; + } + break; + default: + $fields = true; + } + } + $this->server_caps[$name] = $fields; + } + } + } + + /** + * Send an SMTP MAIL command. + * Starts a mail transaction from the email address specified in + * $from. Returns true if successful or false otherwise. If True + * the mail transaction is started and then one or more recipient + * commands may be called followed by a data command. + * Implements RFC 821: MAIL FROM: . + * + * @param string $from Source address of this message + * + * @return bool + */ + public function mail($from) + { + $useVerp = ($this->do_verp ? ' XVERP' : ''); + + return $this->sendCommand( + 'MAIL FROM', + 'MAIL FROM:<' . $from . '>' . $useVerp, + 250 + ); + } + + /** + * Send an SMTP QUIT command. + * Closes the socket if there is no error or the $close_on_error argument is true. + * Implements from RFC 821: QUIT . + * + * @param bool $close_on_error Should the connection close if an error occurs? + * + * @return bool + */ + public function quit($close_on_error = true) + { + $noerror = $this->sendCommand('QUIT', 'QUIT', 221); + $err = $this->error; //Save any error + if ($noerror || $close_on_error) { + $this->close(); + $this->error = $err; //Restore any error from the quit command + } + + return $noerror; + } + + /** + * Send an SMTP RCPT command. + * Sets the TO argument to $toaddr. + * Returns true if the recipient was accepted false if it was rejected. + * Implements from RFC 821: RCPT TO: . + * + * @param string $address The address the message is being sent to + * @param string $dsn Comma separated list of DSN notifications. NEVER, SUCCESS, FAILURE + * or DELAY. If you specify NEVER all other notifications are ignored. + * + * @return bool + */ + public function recipient($address, $dsn = '') + { + if (empty($dsn)) { + $rcpt = 'RCPT TO:<' . $address . '>'; + } else { + $dsn = strtoupper($dsn); + $notify = []; + + if (strpos($dsn, 'NEVER') !== false) { + $notify[] = 'NEVER'; + } else { + foreach (['SUCCESS', 'FAILURE', 'DELAY'] as $value) { + if (strpos($dsn, $value) !== false) { + $notify[] = $value; + } + } + } + + $rcpt = 'RCPT TO:<' . $address . '> NOTIFY=' . implode(',', $notify); + } + + return $this->sendCommand( + 'RCPT TO', + $rcpt, + [250, 251] + ); + } + + /** + * Send an SMTP RSET command. + * Abort any transaction that is currently in progress. + * Implements RFC 821: RSET . + * + * @return bool True on success + */ + public function reset() + { + return $this->sendCommand('RSET', 'RSET', 250); + } + + /** + * Send a command to an SMTP server and check its return code. + * + * @param string $command The command name - not sent to the server + * @param string $commandstring The actual command to send + * @param int|array $expect One or more expected integer success codes + * + * @return bool True on success + */ + protected function sendCommand($command, $commandstring, $expect) + { + if (!$this->connected()) { + $this->setError("Called $command without being connected"); + + return false; + } + //Reject line breaks in all commands + if ((strpos($commandstring, "\n") !== false) || (strpos($commandstring, "\r") !== false)) { + $this->setError("Command '$command' contained line breaks"); + + return false; + } + $this->client_send($commandstring . static::LE, $command); + + $this->last_reply = $this->get_lines(); + // Fetch SMTP code and possible error code explanation + $matches = []; + if (preg_match('/^([\d]{3})[ -](?:([\d]\\.[\d]\\.[\d]{1,2}) )?/', $this->last_reply, $matches)) { + $code = (int) $matches[1]; + $code_ex = (count($matches) > 2 ? $matches[2] : null); + // Cut off error code from each response line + $detail = preg_replace( + "/{$code}[ -]" . + ($code_ex ? str_replace('.', '\\.', $code_ex) . ' ' : '') . '/m', + '', + $this->last_reply + ); + } else { + // Fall back to simple parsing if regex fails + $code = (int) substr($this->last_reply, 0, 3); + $code_ex = null; + $detail = substr($this->last_reply, 4); + } + + $this->edebug('SERVER -> CLIENT: ' . $this->last_reply, self::DEBUG_SERVER); + + if (!in_array($code, (array) $expect, true)) { + $this->setError( + "$command command failed", + $detail, + $code, + $code_ex + ); + $this->edebug( + 'SMTP ERROR: ' . $this->error['error'] . ': ' . $this->last_reply, + self::DEBUG_CLIENT + ); + + return false; + } + + $this->setError(''); + + return true; + } + + /** + * Send an SMTP SAML command. + * Starts a mail transaction from the email address specified in $from. + * Returns true if successful or false otherwise. If True + * the mail transaction is started and then one or more recipient + * commands may be called followed by a data command. This command + * will send the message to the users terminal if they are logged + * in and send them an email. + * Implements RFC 821: SAML FROM: . + * + * @param string $from The address the message is from + * + * @return bool + */ + public function sendAndMail($from) + { + return $this->sendCommand('SAML', "SAML FROM:$from", 250); + } + + /** + * Send an SMTP VRFY command. + * + * @param string $name The name to verify + * + * @return bool + */ + public function verify($name) + { + return $this->sendCommand('VRFY', "VRFY $name", [250, 251]); + } + + /** + * Send an SMTP NOOP command. + * Used to keep keep-alives alive, doesn't actually do anything. + * + * @return bool + */ + public function noop() + { + return $this->sendCommand('NOOP', 'NOOP', 250); + } + + /** + * Send an SMTP TURN command. + * This is an optional command for SMTP that this class does not support. + * This method is here to make the RFC821 Definition complete for this class + * and _may_ be implemented in future. + * Implements from RFC 821: TURN . + * + * @return bool + */ + public function turn() + { + $this->setError('The SMTP TURN command is not implemented'); + $this->edebug('SMTP NOTICE: ' . $this->error['error'], self::DEBUG_CLIENT); + + return false; + } + + /** + * Send raw data to the server. + * + * @param string $data The data to send + * @param string $command Optionally, the command this is part of, used only for controlling debug output + * + * @return int|bool The number of bytes sent to the server or false on error + */ + public function client_send($data, $command = '') + { + //If SMTP transcripts are left enabled, or debug output is posted online + //it can leak credentials, so hide credentials in all but lowest level + if (self::DEBUG_LOWLEVEL > $this->do_debug && + in_array($command, ['User & Password', 'Username', 'Password'], true)) { + $this->edebug('CLIENT -> SERVER: [credentials hidden]', self::DEBUG_CLIENT); + } else { + $this->edebug('CLIENT -> SERVER: ' . $data, self::DEBUG_CLIENT); + } + set_error_handler([$this, 'errorHandler']); + $result = fwrite($this->smtp_conn, $data); + restore_error_handler(); + + return $result; + } + + /** + * Get the latest error. + * + * @return array + */ + public function getError() + { + return $this->error; + } + + /** + * Get SMTP extensions available on the server. + * + * @return array|null + */ + public function getServerExtList() + { + return $this->server_caps; + } + + /** + * Get metadata about the SMTP server from its HELO/EHLO response. + * The method works in three ways, dependent on argument value and current state: + * 1. HELO/EHLO has not been sent - returns null and populates $this->error. + * 2. HELO has been sent - + * $name == 'HELO': returns server name + * $name == 'EHLO': returns boolean false + * $name == any other string: returns null and populates $this->error + * 3. EHLO has been sent - + * $name == 'HELO'|'EHLO': returns the server name + * $name == any other string: if extension $name exists, returns True + * or its options (e.g. AUTH mechanisms supported). Otherwise returns False. + * + * @param string $name Name of SMTP extension or 'HELO'|'EHLO' + * + * @return string|bool|null + */ + public function getServerExt($name) + { + if (!$this->server_caps) { + $this->setError('No HELO/EHLO was sent'); + + return; + } + + if (!array_key_exists($name, $this->server_caps)) { + if ('HELO' === $name) { + return $this->server_caps['EHLO']; + } + if ('EHLO' === $name || array_key_exists('EHLO', $this->server_caps)) { + return false; + } + $this->setError('HELO handshake was used; No information about server extensions available'); + + return; + } + + return $this->server_caps[$name]; + } + + /** + * Get the last reply from the server. + * + * @return string + */ + public function getLastReply() + { + return $this->last_reply; + } + + /** + * Read the SMTP server's response. + * Either before eof or socket timeout occurs on the operation. + * With SMTP we can tell if we have more lines to read if the + * 4th character is '-' symbol. If it is a space then we don't + * need to read anything else. + * + * @return string + */ + protected function get_lines() + { + // If the connection is bad, give up straight away + if (!is_resource($this->smtp_conn)) { + return ''; + } + $data = ''; + $endtime = 0; + stream_set_timeout($this->smtp_conn, $this->Timeout); + if ($this->Timelimit > 0) { + $endtime = time() + $this->Timelimit; + } + $selR = [$this->smtp_conn]; + $selW = null; + while (is_resource($this->smtp_conn) && !feof($this->smtp_conn)) { + //Must pass vars in here as params are by reference + if (!stream_select($selR, $selW, $selW, $this->Timelimit)) { + $this->edebug( + 'SMTP -> get_lines(): timed-out (' . $this->Timeout . ' sec)', + self::DEBUG_LOWLEVEL + ); + break; + } + //Deliberate noise suppression - errors are handled afterwards + $str = @fgets($this->smtp_conn, self::MAX_REPLY_LENGTH); + $this->edebug('SMTP INBOUND: "' . trim($str) . '"', self::DEBUG_LOWLEVEL); + $data .= $str; + // If response is only 3 chars (not valid, but RFC5321 S4.2 says it must be handled), + // or 4th character is a space or a line break char, we are done reading, break the loop. + // String array access is a significant micro-optimisation over strlen + if (!isset($str[3]) || $str[3] === ' ' || $str[3] === "\r" || $str[3] === "\n") { + break; + } + // Timed-out? Log and break + $info = stream_get_meta_data($this->smtp_conn); + if ($info['timed_out']) { + $this->edebug( + 'SMTP -> get_lines(): timed-out (' . $this->Timeout . ' sec)', + self::DEBUG_LOWLEVEL + ); + break; + } + // Now check if reads took too long + if ($endtime && time() > $endtime) { + $this->edebug( + 'SMTP -> get_lines(): timelimit reached (' . + $this->Timelimit . ' sec)', + self::DEBUG_LOWLEVEL + ); + break; + } + } + + return $data; + } + + /** + * Enable or disable VERP address generation. + * + * @param bool $enabled + */ + public function setVerp($enabled = false) + { + $this->do_verp = $enabled; + } + + /** + * Get VERP address generation mode. + * + * @return bool + */ + public function getVerp() + { + return $this->do_verp; + } + + /** + * Set error messages and codes. + * + * @param string $message The error message + * @param string $detail Further detail on the error + * @param string $smtp_code An associated SMTP error code + * @param string $smtp_code_ex Extended SMTP code + */ + protected function setError($message, $detail = '', $smtp_code = '', $smtp_code_ex = '') + { + $this->error = [ + 'error' => $message, + 'detail' => $detail, + 'smtp_code' => $smtp_code, + 'smtp_code_ex' => $smtp_code_ex, + ]; + } + + /** + * Set debug output method. + * + * @param string|callable $method The name of the mechanism to use for debugging output, or a callable to handle it + */ + public function setDebugOutput($method = 'echo') + { + $this->Debugoutput = $method; + } + + /** + * Get debug output method. + * + * @return string + */ + public function getDebugOutput() + { + return $this->Debugoutput; + } + + /** + * Set debug output level. + * + * @param int $level + */ + public function setDebugLevel($level = 0) + { + $this->do_debug = $level; + } + + /** + * Get debug output level. + * + * @return int + */ + public function getDebugLevel() + { + return $this->do_debug; + } + + /** + * Set SMTP timeout. + * + * @param int $timeout The timeout duration in seconds + */ + public function setTimeout($timeout = 0) + { + $this->Timeout = $timeout; + } + + /** + * Get SMTP timeout. + * + * @return int + */ + public function getTimeout() + { + return $this->Timeout; + } + + /** + * Reports an error number and string. + * + * @param int $errno The error number returned by PHP + * @param string $errmsg The error message returned by PHP + * @param string $errfile The file the error occurred in + * @param int $errline The line number the error occurred on + */ + protected function errorHandler($errno, $errmsg, $errfile = '', $errline = 0) + { + $notice = 'Connection failed.'; + $this->setError( + $notice, + $errmsg, + (string) $errno + ); + $this->edebug( + "$notice Error #$errno: $errmsg [$errfile line $errline]", + self::DEBUG_CONNECTION + ); + } + + /** + * Extract and return the ID of the last SMTP transaction based on + * a list of patterns provided in SMTP::$smtp_transaction_id_patterns. + * Relies on the host providing the ID in response to a DATA command. + * If no reply has been received yet, it will return null. + * If no pattern was matched, it will return false. + * + * @return bool|string|null + */ + protected function recordLastTransactionID() + { + $reply = $this->getLastReply(); + + if (empty($reply)) { + $this->last_smtp_transaction_id = null; + } else { + $this->last_smtp_transaction_id = false; + foreach ($this->smtp_transaction_id_patterns as $smtp_transaction_id_pattern) { + if (preg_match($smtp_transaction_id_pattern, $reply, $matches)) { + $this->last_smtp_transaction_id = trim($matches[1]); + break; + } + } + } + + return $this->last_smtp_transaction_id; + } + + /** + * Get the queue/transaction ID of the last SMTP transaction + * If no reply has been received yet, it will return null. + * If no pattern was matched, it will return false. + * + * @return bool|string|null + * + * @see recordLastTransactionID() + */ + public function getLastTransactionID() + { + return $this->last_smtp_transaction_id; + } +} diff --git a/vendor/phpoption/phpoption/LICENSE b/vendor/phpoption/phpoption/LICENSE new file mode 100644 index 00000000..753842b6 --- /dev/null +++ b/vendor/phpoption/phpoption/LICENSE @@ -0,0 +1,201 @@ + Apache License + Version 2.0, January 2004 + http://www.apache.org/licenses/ + + TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION + + 1. Definitions. + + "License" shall mean the terms and conditions for use, reproduction, + and distribution as defined by Sections 1 through 9 of this document. + + "Licensor" shall mean the copyright owner or entity authorized by + the copyright owner that is granting the License. + + "Legal Entity" shall mean the union of the acting entity and all + other entities that control, are controlled by, or are under common + control with that entity. For the purposes of this definition, + "control" means (i) the power, direct or indirect, to cause the + direction or management of such entity, whether by contract or + otherwise, or (ii) ownership of fifty percent (50%) or more of the + outstanding shares, or (iii) beneficial ownership of such entity. + + "You" (or "Your") shall mean an individual or Legal Entity + exercising permissions granted by this License. + + "Source" form shall mean the preferred form for making modifications, + including but not limited to software source code, documentation + source, and configuration files. + + "Object" form shall mean any form resulting from mechanical + transformation or translation of a Source form, including but + not limited to compiled object code, generated documentation, + and conversions to other media types. + + "Work" shall mean the work of authorship, whether in Source or + Object form, made available under the License, as indicated by a + copyright notice that is included in or attached to the work + (an example is provided in the Appendix below). + + "Derivative Works" shall mean any work, whether in Source or Object + form, that is based on (or derived from) the Work and for which the + editorial revisions, annotations, elaborations, or other modifications + represent, as a whole, an original work of authorship. For the purposes + of this License, Derivative Works shall not include works that remain + separable from, or merely link (or bind by name) to the interfaces of, + the Work and Derivative Works thereof. + + "Contribution" shall mean any work of authorship, including + the original version of the Work and any modifications or additions + to that Work or Derivative Works thereof, that is intentionally + submitted to Licensor for inclusion in the Work by the copyright owner + or by an individual or Legal Entity authorized to submit on behalf of + the copyright owner. For the purposes of this definition, "submitted" + means any form of electronic, verbal, or written communication sent + to the Licensor or its representatives, including but not limited to + communication on electronic mailing lists, source code control systems, + and issue tracking systems that are managed by, or on behalf of, the + Licensor for the purpose of discussing and improving the Work, but + excluding communication that is conspicuously marked or otherwise + designated in writing by the copyright owner as "Not a Contribution." + + "Contributor" shall mean Licensor and any individual or Legal Entity + on behalf of whom a Contribution has been received by Licensor and + subsequently incorporated within the Work. + + 2. Grant of Copyright License. Subject to the terms and conditions of + this License, each Contributor hereby grants to You a perpetual, + worldwide, non-exclusive, no-charge, royalty-free, irrevocable + copyright license to reproduce, prepare Derivative Works of, + publicly display, publicly perform, sublicense, and distribute the + Work and such Derivative Works in Source or Object form. + + 3. Grant of Patent License. Subject to the terms and conditions of + this License, each Contributor hereby grants to You a perpetual, + worldwide, non-exclusive, no-charge, royalty-free, irrevocable + (except as stated in this section) patent license to make, have made, + use, offer to sell, sell, import, and otherwise transfer the Work, + where such license applies only to those patent claims licensable + by such Contributor that are necessarily infringed by their + Contribution(s) alone or by combination of their Contribution(s) + with the Work to which such Contribution(s) was submitted. If You + institute patent litigation against any entity (including a + cross-claim or counterclaim in a lawsuit) alleging that the Work + or a Contribution incorporated within the Work constitutes direct + or contributory patent infringement, then any patent licenses + granted to You under this License for that Work shall terminate + as of the date such litigation is filed. + + 4. Redistribution. You may reproduce and distribute copies of the + Work or Derivative Works thereof in any medium, with or without + modifications, and in Source or Object form, provided that You + meet the following conditions: + + (a) You must give any other recipients of the Work or + Derivative Works a copy of this License; and + + (b) You must cause any modified files to carry prominent notices + stating that You changed the files; and + + (c) You must retain, in the Source form of any Derivative Works + that You distribute, all copyright, patent, trademark, and + attribution notices from the Source form of the Work, + excluding those notices that do not pertain to any part of + the Derivative Works; and + + (d) If the Work includes a "NOTICE" text file as part of its + distribution, then any Derivative Works that You distribute must + include a readable copy of the attribution notices contained + within such NOTICE file, excluding those notices that do not + pertain to any part of the Derivative Works, in at least one + of the following places: within a NOTICE text file distributed + as part of the Derivative Works; within the Source form or + documentation, if provided along with the Derivative Works; or, + within a display generated by the Derivative Works, if and + wherever such third-party notices normally appear. The contents + of the NOTICE file are for informational purposes only and + do not modify the License. You may add Your own attribution + notices within Derivative Works that You distribute, alongside + or as an addendum to the NOTICE text from the Work, provided + that such additional attribution notices cannot be construed + as modifying the License. + + You may add Your own copyright statement to Your modifications and + may provide additional or different license terms and conditions + for use, reproduction, or distribution of Your modifications, or + for any such Derivative Works as a whole, provided Your use, + reproduction, and distribution of the Work otherwise complies with + the conditions stated in this License. + + 5. Submission of Contributions. Unless You explicitly state otherwise, + any Contribution intentionally submitted for inclusion in the Work + by You to the Licensor shall be under the terms and conditions of + this License, without any additional terms or conditions. + Notwithstanding the above, nothing herein shall supersede or modify + the terms of any separate license agreement you may have executed + with Licensor regarding such Contributions. + + 6. Trademarks. This License does not grant permission to use the trade + names, trademarks, service marks, or product names of the Licensor, + except as required for reasonable and customary use in describing the + origin of the Work and reproducing the content of the NOTICE file. + + 7. Disclaimer of Warranty. Unless required by applicable law or + agreed to in writing, Licensor provides the Work (and each + Contributor provides its Contributions) on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or + implied, including, without limitation, any warranties or conditions + of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A + PARTICULAR PURPOSE. You are solely responsible for determining the + appropriateness of using or redistributing the Work and assume any + risks associated with Your exercise of permissions under this License. + + 8. Limitation of Liability. In no event and under no legal theory, + whether in tort (including negligence), contract, or otherwise, + unless required by applicable law (such as deliberate and grossly + negligent acts) or agreed to in writing, shall any Contributor be + liable to You for damages, including any direct, indirect, special, + incidental, or consequential damages of any character arising as a + result of this License or out of the use or inability to use the + Work (including but not limited to damages for loss of goodwill, + work stoppage, computer failure or malfunction, or any and all + other commercial damages or losses), even if such Contributor + has been advised of the possibility of such damages. + + 9. Accepting Warranty or Additional Liability. While redistributing + the Work or Derivative Works thereof, You may choose to offer, + and charge a fee for, acceptance of support, warranty, indemnity, + or other liability obligations and/or rights consistent with this + License. However, in accepting such obligations, You may act only + on Your own behalf and on Your sole responsibility, not on behalf + of any other Contributor, and only if You agree to indemnify, + defend, and hold each Contributor harmless for any liability + incurred by, or claims asserted against, such Contributor by reason + of your accepting any such warranty or additional liability. + + END OF TERMS AND CONDITIONS + + APPENDIX: How to apply the Apache License to your work. + + To apply the Apache License to your work, attach the following + boilerplate notice, with the fields enclosed by brackets "[]" + replaced with your own identifying information. (Don't include + the brackets!) The text should be enclosed in the appropriate + comment syntax for the file format. We also recommend that a + file or class name and description of purpose be included on the + same "printed page" as the copyright notice for easier + identification within third-party archives. + + Copyright [yyyy] [name of copyright owner] + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. \ No newline at end of file diff --git a/vendor/phpoption/phpoption/composer.json b/vendor/phpoption/phpoption/composer.json new file mode 100644 index 00000000..bf9d3088 --- /dev/null +++ b/vendor/phpoption/phpoption/composer.json @@ -0,0 +1,38 @@ +{ + "name": "phpoption/phpoption", + "description": "Option Type for PHP", + "keywords": ["php", "option", "language", "type"], + "license": "Apache-2.0", + "authors": [ + { + "name": "Johannes M. Schmitt", + "email": "schmittjoh@gmail.com" + }, + { + "name": "Graham Campbell", + "email": "graham@alt-three.com" + } + ], + "require": { + "php": "^5.5.9 || ^7.0" + }, + "require-dev": { + "phpunit/phpunit": "^4.8.35 || ^5.0 || ^6.0 || ^7.0", + "bamarni/composer-bin-plugin": "^1.3" + }, + "autoload": { + "psr-4": { + "PhpOption\\": "src/PhpOption/" + } + }, + "autoload-dev": { + "psr-4": { + "PhpOption\\Tests\\": "tests/PhpOption/Tests/" + } + }, + "extra": { + "branch-alias": { + "dev-master": "1.7-dev" + } + } +} diff --git a/vendor/phpoption/phpoption/src/PhpOption/LazyOption.php b/vendor/phpoption/phpoption/src/PhpOption/LazyOption.php new file mode 100644 index 00000000..c4b9990b --- /dev/null +++ b/vendor/phpoption/phpoption/src/PhpOption/LazyOption.php @@ -0,0 +1,169 @@ + + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +namespace PhpOption; + +/** + * @template T + * + * @extends Option + */ +final class LazyOption extends Option +{ + /** @var callable(mixed...):(Option) */ + private $callback; + + /** @var array */ + private $arguments; + + /** @var Option|null */ + private $option; + + /** + * @template S + * @param callable(mixed...):(Option) $callback + * @param array $arguments + * + * @return LazyOption + */ + public static function create($callback, array $arguments = []) + { + return new self($callback, $arguments); + } + + /** + * @param callable(mixed...):(Option) $callback + * @param array $arguments + */ + public function __construct($callback, array $arguments = []) + { + if (!is_callable($callback)) { + throw new \InvalidArgumentException('Invalid callback given'); + } + + $this->callback = $callback; + $this->arguments = $arguments; + } + + public function isDefined() + { + return $this->option()->isDefined(); + } + + public function isEmpty() + { + return $this->option()->isEmpty(); + } + + public function get() + { + return $this->option()->get(); + } + + public function getOrElse($default) + { + return $this->option()->getOrElse($default); + } + + public function getOrCall($callable) + { + return $this->option()->getOrCall($callable); + } + + public function getOrThrow(\Exception $ex) + { + return $this->option()->getOrThrow($ex); + } + + public function orElse(Option $else) + { + return $this->option()->orElse($else); + } + + public function ifDefined($callable) + { + $this->option()->ifDefined($callable); + } + + public function forAll($callable) + { + return $this->option()->forAll($callable); + } + + public function map($callable) + { + return $this->option()->map($callable); + } + + public function flatMap($callable) + { + return $this->option()->flatMap($callable); + } + + public function filter($callable) + { + return $this->option()->filter($callable); + } + + public function filterNot($callable) + { + return $this->option()->filterNot($callable); + } + + public function select($value) + { + return $this->option()->select($value); + } + + public function reject($value) + { + return $this->option()->reject($value); + } + + public function getIterator() + { + return $this->option()->getIterator(); + } + + public function foldLeft($initialValue, $callable) + { + return $this->option()->foldLeft($initialValue, $callable); + } + + public function foldRight($initialValue, $callable) + { + return $this->option()->foldRight($initialValue, $callable); + } + + /** + * @return Option + */ + private function option() + { + if (null === $this->option) { + $this->option = call_user_func_array($this->callback, $this->arguments); + if (!$this->option instanceof Option) { + $this->option = null; + + throw new \RuntimeException(sprintf('Expected instance of \%s', Option::class)); + } + } + + return $this->option; + } +} diff --git a/vendor/phpoption/phpoption/src/PhpOption/None.php b/vendor/phpoption/phpoption/src/PhpOption/None.php new file mode 100644 index 00000000..614bcbde --- /dev/null +++ b/vendor/phpoption/phpoption/src/PhpOption/None.php @@ -0,0 +1,136 @@ + + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +namespace PhpOption; + +use EmptyIterator; + +/** + * @extends Option + */ +final class None extends Option +{ + /** @var None|null */ + private static $instance; + + /** + * @return None + */ + public static function create() + { + if (null === self::$instance) { + self::$instance = new self(); + } + + return self::$instance; + } + + public function get() + { + throw new \RuntimeException('None has no value.'); + } + + public function getOrCall($callable) + { + return $callable(); + } + + public function getOrElse($default) + { + return $default; + } + + public function getOrThrow(\Exception $ex) + { + throw $ex; + } + + public function isEmpty() + { + return true; + } + + public function isDefined() + { + return false; + } + + public function orElse(Option $else) + { + return $else; + } + + public function ifDefined($callable) + { + // Just do nothing in that case. + } + + public function forAll($callable) + { + return $this; + } + + public function map($callable) + { + return $this; + } + + public function flatMap($callable) + { + return $this; + } + + public function filter($callable) + { + return $this; + } + + public function filterNot($callable) + { + return $this; + } + + public function select($value) + { + return $this; + } + + public function reject($value) + { + return $this; + } + + public function getIterator() + { + return new EmptyIterator(); + } + + public function foldLeft($initialValue, $callable) + { + return $initialValue; + } + + public function foldRight($initialValue, $callable) + { + return $initialValue; + } + + private function __construct() + { + } +} diff --git a/vendor/phpoption/phpoption/src/PhpOption/Option.php b/vendor/phpoption/phpoption/src/PhpOption/Option.php new file mode 100644 index 00000000..93e4caa4 --- /dev/null +++ b/vendor/phpoption/phpoption/src/PhpOption/Option.php @@ -0,0 +1,434 @@ + + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +namespace PhpOption; + +use ArrayAccess; +use IteratorAggregate; + +/** + * @template T + * + * @implements IteratorAggregate + */ +abstract class Option implements IteratorAggregate +{ + /** + * Creates an option given a return value. + * + * This is intended for consuming existing APIs and allows you to easily + * convert them to an option. By default, we treat ``null`` as the None + * case, and everything else as Some. + * + * @template S + * + * @param S $value The actual return value. + * @param S $noneValue The value which should be considered "None"; null by + * default. + * + * @return Option + */ + public static function fromValue($value, $noneValue = null) + { + if ($value === $noneValue) { + return None::create(); + } + + return new Some($value); + } + + /** + * Creates an option from an array's value. + * + * If the key does not exist in the array, the array is not actually an + * array, or the array's value at the given key is null, None is returned. + * Otherwise, Some is returned wrapping the value at the given key. + * + * @template S + * + * @param array|ArrayAccess|null $array A potential array or \ArrayAccess value. + * @param string $key The key to check. + * + * @return Option + */ + public static function fromArraysValue($array, $key) + { + if (!(is_array($array) || $array instanceof ArrayAccess) || !isset($array[$key])) { + return None::create(); + } + + return new Some($array[$key]); + } + + /** + * Creates a lazy-option with the given callback. + * + * This is also a helper constructor for lazy-consuming existing APIs where + * the return value is not yet an option. By default, we treat ``null`` as + * None case, and everything else as Some. + * + * @template S + * + * @param callable $callback The callback to evaluate. + * @param array $arguments The arguments for the callback. + * @param S $noneValue The value which should be considered "None"; + * null by default. + * + * @return LazyOption + */ + public static function fromReturn($callback, array $arguments = [], $noneValue = null) + { + return new LazyOption(function () use ($callback, $arguments, $noneValue) { + /** @var mixed */ + $return = call_user_func_array($callback, $arguments); + + if ($return === $noneValue) { + return None::create(); + } + + return new Some($return); + }); + } + + /** + * Option factory, which creates new option based on passed value. + * + * If value is already an option, it simply returns. If value is callable, + * LazyOption with passed callback created and returned. If Option + * returned from callback, it returns directly. On other case value passed + * to Option::fromValue() method. + * + * @template S + * + * @param Option|callable|S $value + * @param S $noneValue Used when $value is mixed or + * callable, for None-check. + * + * @return Option|LazyOption + */ + public static function ensure($value, $noneValue = null) + { + if ($value instanceof self) { + return $value; + } elseif (is_callable($value)) { + return new LazyOption(function () use ($value, $noneValue) { + /** @var mixed */ + $return = $value(); + + if ($return instanceof self) { + return $return; + } else { + return self::fromValue($return, $noneValue); + } + }); + } else { + return self::fromValue($value, $noneValue); + } + } + + /** + * Lift a function so that it accepts Option as parameters. + * + * We return a new closure that wraps the original callback. If any of the + * parameters passed to the lifted function is empty, the function will + * return a value of None. Otherwise, we will pass all parameters to the + * original callback and return the value inside a new Option, unless an + * Option is returned from the function, in which case, we use that. + * + * @template S + * + * @param callable $callback + * @param mixed $noneValue + * + * @return callable + */ + public static function lift($callback, $noneValue = null) + { + return function () use ($callback, $noneValue) { + /** @var array */ + $args = func_get_args(); + + $reduced_args = array_reduce( + $args, + /** @param bool $status */ + function ($status, self $o) { + return $o->isEmpty() ? true : $status; + }, + false + ); + // if at least one parameter is empty, return None + if ($reduced_args) { + return None::create(); + } + + $args = array_map( + /** @return T */ + function (self $o) { + // it is safe to do so because the fold above checked + // that all arguments are of type Some + /** @var T */ + return $o->get(); + }, + $args + ); + + return self::ensure(call_user_func_array($callback, $args), $noneValue); + }; + } + + /** + * Returns the value if available, or throws an exception otherwise. + * + * @throws \RuntimeException If value is not available. + * + * @return T + */ + abstract public function get(); + + /** + * Returns the value if available, or the default value if not. + * + * @template S + * + * @param S $default + * + * @return T|S + */ + abstract public function getOrElse($default); + + /** + * Returns the value if available, or the results of the callable. + * + * This is preferable over ``getOrElse`` if the computation of the default + * value is expensive. + * + * @template S + * + * @param callable():S $callable + * + * @return T|S + */ + abstract public function getOrCall($callable); + + /** + * Returns the value if available, or throws the passed exception. + * + * @param \Exception $ex + * + * @return T + */ + abstract public function getOrThrow(\Exception $ex); + + /** + * Returns true if no value is available, false otherwise. + * + * @return bool + */ + abstract public function isEmpty(); + + /** + * Returns true if a value is available, false otherwise. + * + * @return bool + */ + abstract public function isDefined(); + + /** + * Returns this option if non-empty, or the passed option otherwise. + * + * This can be used to try multiple alternatives, and is especially useful + * with lazy evaluating options: + * + * ```php + * $repo->findSomething() + * ->orElse(new LazyOption(array($repo, 'findSomethingElse'))) + * ->orElse(new LazyOption(array($repo, 'createSomething'))); + * ``` + * + * @param Option $else + * + * @return Option + */ + abstract public function orElse(self $else); + + /** + * This is similar to map() below except that the return value has no meaning; + * the passed callable is simply executed if the option is non-empty, and + * ignored if the option is empty. + * + * In all cases, the return value of the callable is discarded. + * + * ```php + * $comment->getMaybeFile()->ifDefined(function($file) { + * // Do something with $file here. + * }); + * ``` + * + * If you're looking for something like ``ifEmpty``, you can use ``getOrCall`` + * and ``getOrElse`` in these cases. + * + * @deprecated Use forAll() instead. + * + * @param callable(T):mixed $callable + * + * @return void + */ + abstract public function ifDefined($callable); + + /** + * This is similar to map() except that the return value of the callable has no meaning. + * + * The passed callable is simply executed if the option is non-empty, and ignored if the + * option is empty. This method is preferred for callables with side-effects, while map() + * is intended for callables without side-effects. + * + * @param callable(T):mixed $callable + * + * @return Option + */ + abstract public function forAll($callable); + + /** + * Applies the callable to the value of the option if it is non-empty, + * and returns the return value of the callable wrapped in Some(). + * + * If the option is empty, then the callable is not applied. + * + * ```php + * (new Some("foo"))->map('strtoupper')->get(); // "FOO" + * ``` + * + * @template S + * + * @param callable(T):S $callable + * + * @return Option + */ + abstract public function map($callable); + + /** + * Applies the callable to the value of the option if it is non-empty, and + * returns the return value of the callable directly. + * + * In contrast to ``map``, the return value of the callable is expected to + * be an Option itself; it is not automatically wrapped in Some(). + * + * @template S + * + * @param callable(T):Option $callable must return an Option + * + * @return Option + */ + abstract public function flatMap($callable); + + /** + * If the option is empty, it is returned immediately without applying the callable. + * + * If the option is non-empty, the callable is applied, and if it returns true, + * the option itself is returned; otherwise, None is returned. + * + * @param callable(T):bool $callable + * + * @return Option + */ + abstract public function filter($callable); + + /** + * If the option is empty, it is returned immediately without applying the callable. + * + * If the option is non-empty, the callable is applied, and if it returns false, + * the option itself is returned; otherwise, None is returned. + * + * @param callable(T):bool $callable + * + * @return Option + */ + abstract public function filterNot($callable); + + /** + * If the option is empty, it is returned immediately. + * + * If the option is non-empty, and its value does not equal the passed value + * (via a shallow comparison ===), then None is returned. Otherwise, the + * Option is returned. + * + * In other words, this will filter all but the passed value. + * + * @param T $value + * + * @return Option + */ + abstract public function select($value); + + /** + * If the option is empty, it is returned immediately. + * + * If the option is non-empty, and its value does equal the passed value (via + * a shallow comparison ===), then None is returned; otherwise, the Option is + * returned. + * + * In other words, this will let all values through except the passed value. + * + * @param T $value + * + * @return Option + */ + abstract public function reject($value); + + /** + * Binary operator for the initial value and the option's value. + * + * If empty, the initial value is returned. If non-empty, the callable + * receives the initial value and the option's value as arguments. + * + * ```php + * + * $some = new Some(5); + * $none = None::create(); + * $result = $some->foldLeft(1, function($a, $b) { return $a + $b; }); // int(6) + * $result = $none->foldLeft(1, function($a, $b) { return $a + $b; }); // int(1) + * + * // This can be used instead of something like the following: + * $option = Option::fromValue($integerOrNull); + * $result = 1; + * if ( ! $option->isEmpty()) { + * $result += $option->get(); + * } + * ``` + * + * @template S + * + * @param S $initialValue + * @param callable(S, T):S $callable + * + * @return S + */ + abstract public function foldLeft($initialValue, $callable); + + /** + * foldLeft() but with reversed arguments for the callable. + * + * @template S + * + * @param S $initialValue + * @param callable(T, S):S $callable + * + * @return S + */ + abstract public function foldRight($initialValue, $callable); +} diff --git a/vendor/phpoption/phpoption/src/PhpOption/Some.php b/vendor/phpoption/phpoption/src/PhpOption/Some.php new file mode 100644 index 00000000..f70db0fc --- /dev/null +++ b/vendor/phpoption/phpoption/src/PhpOption/Some.php @@ -0,0 +1,165 @@ + + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +namespace PhpOption; + +use ArrayIterator; + +/** + * @template T + * + * @extends Option + */ +final class Some extends Option +{ + /** @var T */ + private $value; + + /** + * @param T $value + */ + public function __construct($value) + { + $this->value = $value; + } + + /** + * @template U + * + * @param U $value + * + * @return Some + */ + public static function create($value) + { + return new self($value); + } + + public function isDefined() + { + return true; + } + + public function isEmpty() + { + return false; + } + + public function get() + { + return $this->value; + } + + public function getOrElse($default) + { + return $this->value; + } + + public function getOrCall($callable) + { + return $this->value; + } + + public function getOrThrow(\Exception $ex) + { + return $this->value; + } + + public function orElse(Option $else) + { + return $this; + } + + public function ifDefined($callable) + { + $callable($this->value); + } + + public function forAll($callable) + { + $callable($this->value); + + return $this; + } + + public function map($callable) + { + return new self($callable($this->value)); + } + + public function flatMap($callable) + { + $rs = $callable($this->value); + if (!$rs instanceof Option) { + throw new \RuntimeException('Callables passed to flatMap() must return an Option. Maybe you should use map() instead?'); + } + + return $rs; + } + + public function filter($callable) + { + if (true === $callable($this->value)) { + return $this; + } + + return None::create(); + } + + public function filterNot($callable) + { + if (false === $callable($this->value)) { + return $this; + } + + return None::create(); + } + + public function select($value) + { + if ($this->value === $value) { + return $this; + } + + return None::create(); + } + + public function reject($value) + { + if ($this->value === $value) { + return None::create(); + } + + return $this; + } + + public function getIterator() + { + return new ArrayIterator([$this->value]); + } + + public function foldLeft($initialValue, $callable) + { + return $callable($initialValue, $this->value); + } + + public function foldRight($initialValue, $callable) + { + return $callable($this->value, $initialValue); + } +} diff --git a/vendor/predis/predis/CHANGELOG.md b/vendor/predis/predis/CHANGELOG.md new file mode 100644 index 00000000..0f7941d0 --- /dev/null +++ b/vendor/predis/predis/CHANGELOG.md @@ -0,0 +1,985 @@ +v1.1.1 (2016-06-16) +================================================================================ + +- __FIX__: `password` and `database` from the global `parameters` client option + were still being applied to sentinels connections making them fail (sentinels + do not understand the `AUTH` and `SELECT` commands) (PR #346). + +- __FIX__: when a sentinel instance reports no sentinel for a service, invoking + `connect()` on the redis-sentinel connection backend should fall back to the + master connection instead of failing (ISSUE #342). + +- __FIX__: the two connection backends based on ext-phpiredis has some kind of + issues with the GC and the internal use of closures as reader callbacks that + prevented connections going out of scope from being properly collected and the + underlying stream or socket resources from being closed and freed. This should + not have had any actual effect in real-world scenarios due to the lifecycle of + PHP scripts, but we fixed it anyway (ISSUE #345). + + +v1.1.0 (2016-06-02) +================================================================================ + +- The default server profile for the client now targets Redis 3.2. + +- Responses to the following commands are not casted into booleans anymore, the + original integer value is returned: `SETNX`, `MSETNX`, `SMOVE`, `SISMEMBER`, + `HSET`, `HSETNX`, `HEXISTS`, `PFADD`, `EXISTS`, `MOVE`, `PERSIST`, `EXPIRE`, + `EXPIREAT`, `RENAMENX`. This change does not have a significant impact unless + when using strict comparisons (=== and !==) the returned value. + +- Non-boolean string values passed to the `persistent` connection parameter can + be used to create different persistent connections. Note that this feature was + already present in Predis but required both `persistent` and `path` to be set + as illustrated by [#139](https://github.com/nrk/predis/pull/139). This change + is needed to prevent confusion with how `path` is used to select a database + when using the `redis` scheme. + +- The client throws exceptions when Redis returns any kind of error response to + initialization commands (the ones being automatically sent when a connection + is established, such as `SELECT` and `AUTH` when database and password are set + in connection parameters) regardless of the value of the exception option. + +- Using `unix:///path/to/socket` in URI strings to specify a UNIX domain socket + file is now deprecated in favor of the format `unix:/path/to/socket` (note the + lack of the double slash after the scheme) and will not be supported starting + with the next major release. + +- Implemented full support for redis-sentinel. + +- Implemented the ability to specify default connection parameters for aggregate + connections with the new `parameters` client option. These parameters augment + the usual user-supplied connection parameters (but do not take the precedence + over them) when creating new connections and they are mostly useful when the + client is using aggregate connections such as redis-cluster and redis-sentinel + as these backends can create new connections on the fly based on responses and + redirections from Redis. + +- Redis servers protected by SSL-encrypted connections can be accessed by using + the `tls` or `rediss` scheme in connection parameters along with SSL-specific + options in the `ssl` parameter (see http://php.net/manual/context.ssl.php). + +- `Predis\Client` implements `IteratorAggregate` making it possible to iterate + over traversable aggregate connections and get a new client instance for each + Redis node. + +- Iterating over an instance of `Predis\Connection\Aggregate\RedisCluster` will + return all the connections mapped in the slots map instead of just the ones in + the pool. This change makes it possible, when the slots map is retrieved from + Redis, to iterate over all of the master nodes in the cluster. When the use of + `CLUSTER SLOTS` is disabled via the `useClusterSlots()` method, the iteration + returns only the connections with slots ranges associated in their parameters + or the ones initialized by `-MOVED` responses in order to make the behaviour + of the iteration consistent between the two modes of operation. + +- Various improvements to `Predis\Connection\Aggregate\MasterSlaveReplication` + (the "basic" replication backend, not the new one based on redis-sentinel): + + - When the client is not able to send a read-only command to a slave because + the current connection fails or the slave is resyncing (`-LOADING` response + returned by Redis), the backend discards the failed connection and performs + a new attempt on the next slave. When no other slave is available the master + server is used for read-only commands as last resort. + + - It is possible to discover the current replication configuration on the fly + by invoking the `discover()` method which internally relies on the output of + the command `INFO REPLICATION` executed against the master server or one of + the slaves. The backend can also be configured to do this automatically when + it fails to reach one of the servers. + + - Implemented the `switchToMaster()` and `switchToSlave()` methods to make it + easier to force a switch to the master server or a random slave when needed. + + +v1.0.4 (2016-05-30) +================================================================================ + +- Added new profile for Redis 3.2 with its new commands: `HSTRLEN`, `BITFIELD`, + `GEOADD`, `GEOHASH`, `GEOPOS`, `GEODIST`, `GEORADIUS`, `GEORADIUSBYMEMBER`. + The default server profile for Predis is still the one for Redis 3.0 you must + set the `profile` client option to `3.2` when initializing the client in order + to be able to use them when connecting to Redis 3.2. + +- Various improvements in the handling of redis-cluster: + + - If the connection to a specific node fails when executing a command, the + client tries to connect to another node in order to refresh the slots map + and perform a new attempt to execute the command. + + - Connections to nodes can be preassigned to non-contiguous slot ranges via + the `slots` parameter using a comma separator. This is how it looks like + in practice: `tcp://127.0.0.1:6379?slots=0-5460,5500-5600,11000`. + +- __FIX__: broken values returned by `Predis\Collection\Iterator\HashKey` when + iterating hash keys containing integer fields (PR #330, ISSUE #331). + +- __FIX__: prevent failures when `Predis\Connection\StreamConnection` serializes + commands with holes in their arguments (e.g. `[0 => 'key:0', 2 => 'key:2']`). + The same fix has been applied to `Predis\Protocol\Text\RequestSerializer`. + (ISSUE #316). + + +v1.0.3 (2015-07-30) +================================================================================ + +- __FIX__: the previous release introduced a severe regression on HHVM that made + the library unable to connect to Redis when using IPv4 addresses. Code running + on the standard PHP interpreter is not affected. + + +v1.0.2 (2015-07-30) +================================================================================ + +- IPv6 is now fully supported. + +- Added `redis` as an accepted scheme for connection parameters. When using this + scheme, the rules used to parse URI strings match the provisional registration + [published by IANA](http://www.iana.org/assignments/uri-schemes/prov/redis). + +- Added new or missing commands: `HSTRLEN` (>= 3.2), `ZREVRANGEBYLEX` (>= 2.8) + and `MIGRATE` (>= 2.6). + +- Implemented support for the `ZADD` modifiers `NX|XX`, `CH`, `INCR` (Redis >= + 3.0.2) using the simplified signature where scores and members are passed as + a named array. + +- __FIX__: `Predis\Configuration\Options` must not trigger the autoloader when + option values are strings (ISSUE #257). + +- __FIX__: `BITPOS` was not defined in the key-prefix processor (ISSUE #265) and + in the replication strategy. + + +v1.0.1 (2015-01-02) +================================================================================ + +- Added `BITPOS` to the server profile for Redis 2.8. + +- Connection timeout for read/write operations can now be set for UNIX sockets + where the underlying connection uses PHP's stream. + +- __FIX__: broken values returned by `Predis\Collection\Iterator\SortedSetKey` + when iterating sorted set containing integer members (ISSUE #216). + +- __FIX__: applied a minor workaround for a bug in old versions of PHP < 5.3.9 + affecting inheritance. + +- __FIX__: prevent E_NOTICE warnings when using INFO [section] returns an empty + response due to an unsupported specific set of information requested to Redis. + + +v1.0.0 (2014-08-01) +================================================================================ + +- Switched to PSR-4 for autoloading. + +- The default server profile for Redis is `3.0`. + +- Removed server profile for Redis 1.2. + +- Added `SENTINEL` to the profile for Redis 2.6 and `PUBSUB` to the profile for + Redis 2.8. + +- `Predis\Client` can now send raw commands using `Predis\Client::executeRaw()`. + +- Status responses are returned as instances of `Predis\Response\Status`, for + example +OK is not returned as boolean TRUE anymore which is a breaking change + for those using strict comparisons. Status responses can be casted to string + values carrying the original payload, so one can do `$response == 'OK'` which + is also more akin to how Redis replies to clients. + +- Commands `ZRANGE`, `ZRANGEBYSCORE`, `ZREVRANGE` and `ZREVRANGEBYSCORE` using + `WITHSCORE` return a named array of member => score instead of using an array + of [member, score] elements. Insertion order is preserved anyway due to how + PHP works internally. + +- The command `ZSCAN` returns a named array of member => score instead of using + an array of [member, score] elements. Insertion order is preserved anyway due + to how PHP works internally. + +- The rules for redis-cluster are now leveraged for empty key tags when using + client-side sharding, which means that when one or the first occurrence of {} + is found in a key it will most likely produce a different hash than previous + versions of Predis thus leading to a different partitioning in these cases. + +- Invoking `Predis\Client::connect()` when the underlying connection has been + already established does not throw any exception anymore, now the connection + simply does not attempt to perform any operation. + +- Added the `aggregate` client option, useful to fully customize how the client + should aggregate multiple connections when an array of connection parameters + is passed to `Predis\Client::__construct()`. + +- Dropped support for streamable multibulk responses. Actually we still ship the + iterator response classes just in case anyone would want to build custom stuff + at a level lower than the client abstraction (our standard and composable text + protocol processors still handle them and can be used as an example). + +- Simplified the implementation of connection parameters by removing method used + to cast to int / bool / float certain parameters supplied by users. Casting + values, if deemed necessary, should be done by the consumer or you can just + subclass `Predis\Connection\Parameters` and override the `filter()` method. + +- Changed a couple of options for our transaction abstraction: + + - `exceptions`: overrides the value of the client option with the same name. + Please note that it does not affect all the transaction control commands + such as `MULTI`, `EXEC`, `DISCARD`, `WATCH` and `UNWATCH`. + - `on_retry`: this option has been removed. + +- Removed pipeline executors, now command pipelines can be easily customized by + extending the standard `Predis\Pipeline\Pipeline` class. Accepted options when + creating a pipeline using `Predis\Client::pipeline()` are: + + - `atomic`: returns a pipeline wrapped in a MULTI / EXEC transaction + (class: `Predis\Pipeline\Atomic`). + - `fire-and-forget`: returns a pipeline that does not read back responses + (class: `Predis\Pipeline\FireAndForget`). + +- Renamed the two base abstract command classes: + + - `Predis\Command\AbstractCommand` is now `Predis\Command\Command` + - `Predis\Command\ScriptedCommand` is now `Predis\Command\ScriptCommand` + +- Dropped `Predis\Command\Command::__toString()` (see issue #151). + +- The key prefixing logic has been moved from command classes to the key prefix + processor. Developers can define or override handlers used to prefix keys, but + they can also define the needed logic in their command classes by implementing + `Predis\Command\PrefixableCommandInterface` just like before. + +- `Predis\PubSub\DispatcherLoop` now takes a `Predis\PubSub\Consumer` instance + as the sole argument of its constructor instead of `Predis\ClientInterface`. + +- All of the interfaces and classes related to translated Redis response types + have been moved in the new `Predis\Response` namespace and most of them have + been renamed to make their fully-qualified name less redundant. Now the base + response interface is `Predis\Response\ResponseInterface`. + +- Renamed interface `Predis\Command\Processor\CommandProcessorInterface` to a + shorter `Predis\Command\Processor\ProcessorInterface`. Also removed interface + for chain processors since it is basically useless. + +- Renamed `Predis\ExecutableContextInterface` to `Predis\ClientContextInterface` + and augmented it with a couple of required methods since this interface is no + more comparable to a basic client as it could be misleading. + +- The `Predis\Option` namespace is now known as `Predis\Configuration` and have + a fully-reworked `Options` class with the ability to lazily initialize values + using objects that responds to `__invoke()` (not all the kinds of callables) + even for custom options defined by the user. + +- Renamed `Predis\Connection\ConnectionInterface::writeCommand()` into + `writeRequest()` for consistency with its counterpart, `readResponse()`. + +- Renamed `Predis\Connection\SingleConnectionInterface::pushInitCommand()` into + `addConnectCommand()` which is more obvious. + +- Renamed the connection class based on both ext-phpiredis and ext-socket into + `Predis\Connection\PhpiredisSocketConnection`. The one based on PHP's streams + is still named `Predis\Connection\PhpiredisStreamConnection`. + +- Renamed the connection factory class to `Predis\Connection\Factory`. Now its + constructor does not require anymore a profile instance to create `AUTH` and + `SELECT` commands when parameters contain both `password` and `database`. Raw + commands will be used instead. + +- Renamed the connection parameters class to `Predis\Connection\Parameters`. Now + its constructor accepts only named arrays, but instances can still be created + using both URIs or arrays using the static method `Parameters::create()`. + +- The profile factory code has been extracted from the abstract Redis profile + class and now lives in `Predis\Profile\Factory`. + +- The `Predis\Connection` namespace has been completely reorganized by renaming + a few classes and interfaces and adding some sub-namespaces. + +- Most classes and interfaces in the `Predis\Protocol` namespace have been moved + or renamed while rationalizing the whole API for external protocol processors. + + +v0.8.7 (2014-08-01) +================================================================================ + +- Added `3.0` in the server profiles aliases list for Redis 3.0. `2.8` is still + the default server profile and `dev` still targets Redis 3.0. + +- Added `COMMAND` to the server profile for Redis 2.8. + +- Switched internally to the `CLUSTER SLOTS` command instead of `CLUSTER NODES` + to fetch the updated slots map from redis-cluster. This change requires users + to upgrade Redis nodes to >= 3.0.0b7. + +- The updated slots map is now fetched automatically from redis-cluster upon the + first `-MOVED` response by default. This change makes it possible to feed the + client constructor with only a few nodes of the actual cluster composition, + without needing a more complex configuration. + +- Implemented support for `PING` in PUB/SUB loop for Redis >= 3.0.0b8. + +- The default client-side sharding strategy and the one for redis-cluster now + share the same implementations as they follow the same rules. One difference, + aside from the different hashing function used to calculate distribution, is + in how empty hash tags like {} are treated by redis-cluster. + +- __FIX__: the patch applied to fix #180 introduced a regression affecting read/ + write timeouts in `Predis\Connection\PhpiredisStreamConnection`. Unfortunately + the only possible solution requires PHP 5.4+. On PHP 5.3, read/write timeouts + will be ignored from now on. + + +v0.8.6 (2014-07-15) +================================================================================ + +- Redis 2.8 is now the default server profile as there are no changes that would + break compatibility with previous releases. + +- Added `PFADD`, `PFCOUNT`, `PFMERGE` to the server profile for Redis 2.8 for + handling the HyperLogLog data structure introduced in Redis 2.8.9. + +- Added `ZLEXCOUNT`, `ZRANGEBYLEX`, `ZREMRANGEBYLEX` to the server profile for + Redis 2.8 for handling lexicographic operations on members of sorted sets. + +- Added support for key hash tags when using redis-cluster (Redis 3.0.0b1). + +- __FIX__: minor tweaks to make Predis compatible with HHVM >= 2.4.0. + +- __FIX__: responses to `INFO` are now properly parsed and will not break when + redis sentinel is being used (ISSUE #154). + +- __FIX__: added missing support for `INCRBYFLOAT` in cluster and replication + configurations (ISSUE #159). + +- __FIX__: fix parsing of the output of `CLUSTER NODES` to fetch the slots map + from a node when redis-cluster has slaves in its configuration (ISSUE #165). + +- __FIX__: prevent a stack overflow when iterating over large Redis collections + using our abstraction for cursor-based iterators (ISSUE #182). + +- __FIX__: properly discards transactions when the server immediately returns an + error response (e.g. -OOM or -ERR on invalid arguments for a command) instead + of a +QUEUED response (ISSUE #187). + +- Upgraded to PHPUnit 4.* for the test suite. + + +v0.8.5 (2014-01-16) +================================================================================ + +- Added `2.8` in the server profiles aliases list for Redis 2.8. `2.6` is still + the default server profile and `dev` now targets Redis 3.0. + +- Added `SCAN`, `SSCAN`, `ZSCAN`, `HSCAN` to the server profile for Redis 2.8. + +- Implemented PHP iterators for incremental iterations over Redis collections: + + - keyspace (cursor-based iterator using `SCAN`) + - sets (cursor-based iterator using `SSCAN`) + - sorted sets (cursor-based iterator using `ZSCAN`) + - hashes (cursor-based iterator using `HSCAN`) + - lists (plain iterator using `LRANGE`) + +- It is now possible to execute "raw commands" using `Predis\Command\RawCommand` + and a variable list of command arguments. Input arguments are not filtered and + responses are not parsed, which means arguments must follow the signature of + the command as defined by Redis and complex responses are left untouched. + +- URI parsing for connection parameters has been improved and has slightly less + overhead when the number of fields in the querystring grows. New features are: + + - Parsing does not break when value of a field contains one or more "=". + - Repeated fieldnames using [] produce an array of values. + - Empty or incomplete "key=value" pairs result in an empty string for "key". + +- Various improvements and fixes to the redis-cluster connection backend: + + - __FIX__: the `ASKING` command is sent upon -ASK redirections. + - An updated slots-map can be fetched from nodes using the `CLUSTER NODES` + command. By default this is a manual operation but can be enabled to get + automatically done upon -MOVED redirections. + - It is possible to specify a common set of connection parameters that are + applied to connections created on the fly upon redirections to nodes not + part of the initial pool. + +- List of deprecated methods: + + - `Predis\Client::multiExec()`: superseded by `Predis\Client::transaction()` + and to be removed in the next major release. + - `Predis\Client::pubSub()`: superseded by `Predis\Client::pubSubLoop()` and + to be removed in the next major release. This change was needed due to the + recently introduced `PUBSUB` command in Redis 2.8. + + +v0.8.4 (2013-07-27) +================================================================================ + +- Added `DUMP` and `RESTORE` to the server profile for Redis 2.6. + +- Connection exceptions now report basic host details in their messages. + +- Allow `Predis\Connection\PhpiredisConnection` to use a random IP when a host + actually has several IPs (ISSUE #116). + +- __FIX__: allow `HMSET` when using a cluster of Redis nodes with client-side + sharding or redis-cluster (ISSUE #106). + +- __FIX__: set `WITHSCORES` modifer for `ZRANGE`, `ZREVRANGE`, `ZRANGEBYSCORE` + and `ZREVRANGEBYSCORE` only when the options array passed to these commands + has `WITHSCORES` set to `true` (ISSUE #107). + +- __FIX__: scripted commands falling back from `EVALSHA` to `EVAL` resulted in + PHP errors when using a prefixed client (ISSUE #109). + +- __FIX__: `Predis\PubSub\DispatcherLoop` now works properly when using key + prefixing (ISSUE #114). + + +v0.8.3 (2013-02-18) +================================================================================ + +- Added `CLIENT SETNAME` and `CLIENT GETNAME` (ISSUE #102). + +- Implemented the `Predis\Connection\PhpiredisStreamConnection` class using the + `phpiredis` extension like `Predis\Connection\PhpiredisStreamConnection`, but + without requiring the `socket` extension since it relies on PHP's streams. + +- Added support for the TCP_NODELAY flag via the `tcp_nodelay` parameter for + stream-based connections, namely `Predis\Connection\StreamConnection` and + `Predis\Connection\PhpiredisStreamConnection` (requires PHP >= 5.4.0). + +- Updated the aggregated connection class for redis-cluster to work with 16384 + hash slots instead of 4096 to reflect the recent change from redis unstable + ([see this commit](https://github.com/antirez/redis/commit/ebd666d)). + +- The constructor of `Predis\Client` now accepts a callable as first argument + returning `Predis\Connection\ConnectionInterface`. Users can create their + own self-contained strategies to create and set up the underlying connection. + +- Users should return `0` from `Predis\Command\ScriptedCommand::getKeysCount()` + instead of `FALSE` to indicate that all of the arguments of a Lua script must + be used to populate `ARGV[]`. This does not represent a breaking change. + +- The `Predis\Helpers` class has been deprecated and it will be removed in + future releases. + + +v0.8.2 (2013-02-03) +================================================================================ + +- Added `Predis\Session\SessionHandler` to make it easy to store PHP sessions + on Redis using Predis. Please note that this class needs either PHP >= 5.4.0 + or a polyfill for PHP's `SessionHandlerInterface`. + +- Added the ability to get the default value of a client option directly from + `Predis\Option\ClientOption` using the `getDefault()` method by passing the + option name or its instance. + +- __FIX__: the standard pipeline executor was not using the response parser + methods associated to commands to process raw responses (ISSUE #101). + + +v0.8.1 (2013-01-19) +================================================================================ + +- The `connections` client option can now accept a callable object returning + an instance of `Predis\Connection\ConnectionFactoryInterface`. + +- Client options accepting callable objects as factories now pass their actual + instance to the callable as the second argument. + +- `Predis\Command\Processor\KeyPrefixProcessor` can now be directly casted to + string to obtain the current prefix, useful with string interpolation. + +- Added an optional callable argument to `Predis\Cluster\Distribution\HashRing` + and `Predis\Cluster\Distribution\KetamaPureRing` constructor that can be used + to customize how the distributor should extract the connection hash when + initializing the nodes distribution (ISSUE #36). + +- Correctly handle `TTL` and `PTTL` returning -2 on non existing keys starting + with Redis 2.8. + +- __FIX__: a missing use directive in `Predis\Transaction\MultiExecContext` + caused PHP errors when Redis did not return `+QUEUED` replies to commands + when inside a MULTI / EXEC context. + +- __FIX__: the `parseResponse()` method implemented for a scripted command was + ignored when retrying to execute a Lua script by falling back to `EVAL` after + a `-NOSCRIPT` error (ISSUE #94). + +- __FIX__: when subclassing `Predis\Client` the `getClientFor()` method returns + a new instance of the subclass instead of a new instance of `Predis\Client`. + + +v0.8.0 (2012-10-23) +================================================================================ + +- The default server profile for Redis is now `2.6`. + +- Certain connection parameters have been renamed: + + - `connection_async` is now `async_connect` + - `connection_timeout` is now `timeout` + - `connection_persistent` is now `persistent` + +- The `throw_errors` connection parameter has been removed and replaced by the + new `exceptions` client option since exceptions on `-ERR` replies returned by + Redis are not generated by connection classes anymore but instead are thrown + by the client class and other abstractions such as pipeline contexts. + +- Added smart support for redis-cluster (Redis v3.0) in addition to the usual + cluster implementation that uses client-side sharding. + +- Various namespaces and classes have been renamed to follow rules inspired by + the Symfony2 naming conventions. + +- The second argument of the constructor of `Predis\Client` does not accept + strings or instances of `Predis\Profile\ServerProfileInterface` anymore. + To specify a server profile you must explicitly set `profile` in the array + of client options. + +- `Predis\Command\ScriptedCommand` internally relies on `EVALSHA` instead of + `EVAL` thus avoiding to send Lua scripts bodies on each request. The client + automatically resends the command falling back to `EVAL` when Redis returns a + `-NOSCRIPT` error. Automatic fallback to `EVAL` does not work with pipelines, + inside a `MULTI / EXEC` context or with plain `EVALSHA` commands. + +- Complex responses are no more parsed by connection classes as they must be + processed by consumer classes using the handler associated to the issued + command. This means that executing commands directly on connections only + returns simple Redis types, but nothing changes when using `Predis\Client` + or the provided abstractions for pipelines and transactions. + +- Iterators for multi-bulk replies now skip the response parsing method of the + command that generated the response and are passed directly to user code. + Pipeline and transaction objects still consume automatically iterators. + +- Cluster and replication connections now extend a new common interface, + `Predis\Connection\AggregatedConnectionInterface`. + +- `Predis\Connection\MasterSlaveReplication` now uses an external strategy + class to handle the logic for checking readable / writable commands and Lua + scripts. + +- Command pipelines have been optimized for both speed and code cleanness, but + at the cost of bringing a breaking change in the signature of the interface + for pipeline executors. + +- Added a new pipeline executor that sends commands wrapped in a MULTI / EXEC + context to make the execution atomic: if a pipeline fails at a certain point + then the whole pipeline is discarded. + +- The key-hashing mechanism for commands is now handled externally and is no + more a competence of each command class. This change is neeeded to support + both client-side sharding and Redis cluster. + +- `Predis\Options\Option` is now abstract, see `Predis\Option\AbstractOption`. + + +v0.7.3 (2012-06-01) +================================================================================ + +- New commands available in the Redis v2.6 profile (dev): `BITOP`, `BITCOUNT`. + +- When the number of keys `Predis\Commands\ScriptedCommand` is negative, Predis + will count from the end of the arguments list to calculate the actual number + of keys that will be interpreted as elements for `KEYS` by the underlying + `EVAL` command. + +- __FIX__: `examples\CustomDistributionStrategy.php` had a mistyped constructor + call and produced a bad distribution due to an error as pointed in ISSUE #63. + This bug is limited to the above mentioned example and does not affect the + classes implemented in the `Predis\Distribution` namespace. + +- __FIX__: `Predis\Commands\ServerEvalSHA::getScriptHash()` was calculating the + hash while it just needs to return the first argument of the command. + +- __FIX__: `Predis\Autoloader` has been modified to allow cascading autoloaders + for the `Predis` namespace. + + +v0.7.2 (2012-04-01) +================================================================================ + +- Added `2.6` in the server profiles aliases list for the upcoming Redis 2.6. + `2.4` is still the default server profile. `dev` now targets Redis 2.8. + +- Connection instances can be serialized and unserialized using `serialize()` + and `unserialize()`. This is handy in certain scenarios such as client-side + clustering or replication to lower the overhead of initializing a connection + object with many sub-connections since unserializing them can be up to 5x + times faster. + +- Reworked the default autoloader to make it faster. It is also possible to + prepend it in PHP's autoload stack. + +- __FIX__: fixed parsing of the payload returned by `MONITOR` with Redis 2.6. + + +v0.7.1 (2011-12-27) +================================================================================ + +- The PEAR channel on PearHub has been deprecated in favour of `pear.nrk.io`. + +- Miscellaneous minor fixes. + +- Added transparent support for master / slave replication configurations where + write operations are performed on the master server and read operations are + routed to one of the slaves. Please refer to ISSUE #21 for a bit of history + and more details about replication support in Predis. + +- The `profile` client option now accepts a callable object used to initialize + a new instance of `Predis\Profiles\IServerProfile`. + +- Exposed a method for MULTI / EXEC contexts that adds the ability to execute + instances of Redis commands against transaction objects. + + +v0.7.0 (2011-12-11) +================================================================================ + +- Predis now adheres to the PSR-0 standard which means that there is no more a + single file holding all the classes of the library, but multiple files (one + for each class). You can use any PSR-0 compatible autoloader to load Predis + or just leverage the default one shipped with the library by requiring the + `Predis/Autoloader.php` and call `Predis\Autoloader::register()`. + +- The default server profile for Redis is now 2.4. The `dev` profile supports + all the features of Redis 2.6 (currently unstable) such as Lua scripting. + +- Support for long aliases (method names) for Redis commands has been dropped. + +- Redis 1.0 is no more supported. From now on Predis will use only the unified + protocol to serialize commands. + +- It is possible to prefix keys transparently on a client-level basis with the + new `prefix` client option. + +- An external connection factory is used to initialize new connection instances + and developers can now register their own connection classes using the new + `connections` client option. + +- It is possible to connect locally to Redis using UNIX domain sockets. Just + use `unix:///path/to/redis.sock` or a named array just like in the following + example: `array('scheme' => 'unix', 'path' => '/path/to/redis.sock');`. + +- If the `phpiredis` extension is loaded by PHP, it is now possible to use an + alternative connection class that leverages it to make Predis faster on many + cases, especially when dealing with big multibulk replies, with the the only + downside that persistent connections are not supported. Please refer to the + documentation to see how to activate this class using the new `connections` + client option. + +- Predis is capable to talk with Webdis, albeit with some limitations such as + the lack of pipelining and transactions, just by using the `http` scheme in + in the connection parameters. All is needed is PHP with the `curl` and the + `phpiredis` extensions loaded. + +- Way too many changes in the public API to make a list here, we just tried to + make all the Redis commands compatible with previous releases of v0.6 so that + you do not have to worry if you are simply using Predis as a client. Probably + the only breaking changes that should be mentioned here are: + + - `throw_on_error` has been renamed to `throw_errors` and it is a connection + parameter instead of a client option, along with `iterable_multibulk`. + + - `key_distribution` has been removed from the client options. To customize + the distribution strategy you must provide a callable object to the new + `cluster` client option to configure and then return a new instance of + `Predis\Network\IConnectionCluster`. + + - `Predis\Client::create()` has been removed. Just use the constructor to set + up a new instance of `Predis\Client`. + + - `Predis\Client::pipelineSafe()` was deprecated in Predis v0.6.1 and now has + finally removed. Use `Predis\Client::pipeline(array('safe' => true))`. + + - `Predis\Client::rawCommand()` has been removed due to inconsistencies with + the underlying connection abstractions. You can still get the raw resource + out of a connection with `Predis\Network\IConnectionSingle::getResource()` + so that you can talk directly with Redis. + +- The `Predis\MultiBulkCommand` class has been merged into `Predis\Command` and + thus removed. Serialization of commands is now a competence of connections. + +- The `Predis\IConnection` interface has been splitted into two new interfaces: + `Predis\Network\IConnectionSingle` and `Predis\Network\IConnectionCluster`. + +- The constructor of `Predis\Client` now accepts more type of arguments such as + instances of `Predis\IConnectionParameters` and `Predis\Network\IConnection`. + + +v0.6.6 (2011-04-01) +================================================================================ + +- Switched to Redis 2.2 as the default server profile (there are no changes + that would break compatibility with previous releases). Long command names + are no more supported by default but if you need them you can still require + `Predis_Compatibility.php` to avoid breaking compatibility. + +- Added a `VERSION` constant to `Predis\Client`. + +- Some performance improvements for multibulk replies (parsing them is about + 16% faster than the previous version). A few core classes have been heavily + optimized to reduce overhead when creating new instances. + +- Predis now uses by default a new protocol reader, more lightweight and + faster than the default handler-based one. Users can revert to the old + protocol reader with the `reader` client option set to `composable`. + This client option can also accept custom reader classes implementing the + new `Predis\IResponseReader` interface. + +- Added support for connecting to Redis using UNIX domain sockets (ISSUE #25). + +- The `read_write_timeout` connection parameter can now be set to 0 or false + to disable read and write timeouts on connections. The old behaviour of -1 + is still intact. + +- `ZUNIONSTORE` and `ZINTERSTORE` can accept an array to specify a list of the + source keys to be used to populate the destination key. + +- `MGET`, `SINTER`, `SUNION` and `SDIFF` can accept an array to specify a list + of keys. `SINTERSTORE`, `SUNIONSTORE` and `SDIFFSTORE` can also accept an + array to specify the list of source keys. + +- `SUBSCRIBE` and `PSUBSCRIBE` can accept a list of channels for subscription. + +- __FIX__: some client-side clean-ups for `MULTI/EXEC` were handled incorrectly + in a couple of corner cases (ISSUE #27). + + +v0.6.5 (2011-02-12) +================================================================================ + +- __FIX__: due to an untested internal change introduced in v0.6.4, a wrong + handling of bulk reads of zero-length values was producing protocol + desynchronization errors (ISSUE #20). + + +v0.6.4 (2011-02-12) +================================================================================ + +- Various performance improvements (15% ~ 25%) especially when dealing with + long multibulk replies or when using clustered connections. + +- Added the `on_retry` option to `Predis\MultiExecBlock` that can be used to + specify an external callback (or any callable object) that gets invoked + whenever a transaction is aborted by the server. + +- Added inline (p)subscribtion via options when initializing an instance of + `Predis\PubSubContext`. + + +v0.6.3 (2011-01-01) +================================================================================ + +- New commands available in the Redis v2.2 profile (dev): + - Strings: `SETRANGE`, `GETRANGE`, `SETBIT`, `GETBIT` + - Lists : `BRPOPLPUSH` + +- The abstraction for `MULTI/EXEC` transactions has been dramatically improved + by providing support for check-and-set (CAS) operations when using Redis >= + 2.2. Aborted transactions can also be optionally replayed in automatic up + to a user-defined number of times, after which a `Predis\AbortedMultiExec` + exception is thrown. + + +v0.6.2 (2010-11-28) +================================================================================ + +- Minor internal improvements and clean ups. + +- New commands available in the Redis v2.2 profile (dev): + - Strings: `STRLEN` + - Lists : `LINSERT`, `RPUSHX`, `LPUSHX` + - ZSets : `ZREVRANGEBYSCORE` + - Misc. : `PERSIST` + +- WATCH also accepts a single array parameter with the keys that should be + monitored during a transaction. + +- Improved the behaviour of `Predis\MultiExecBlock` in certain corner cases. + +- Improved parameters checking for the SORT command. + +- __FIX__: the `STORE` parameter for the `SORT` command didn't work correctly + when using `0` as the target key (ISSUE #13). + +- __FIX__: the methods for `UNWATCH` and `DISCARD` do not break anymore method + chaining with `Predis\MultiExecBlock`. + + +v0.6.1 (2010-07-11) +================================================================================ + +- Minor internal improvements and clean ups. + +- New commands available in the Redis v2.2 profile (dev): + - Misc. : `WATCH`, `UNWATCH` + +- Optional modifiers for `ZRANGE`, `ZREVRANGE` and `ZRANGEBYSCORE` queries are + supported using an associative array passed as the last argument of their + respective methods. + +- The `LIMIT` modifier for `ZRANGEBYSCORE` can be specified using either: + - an indexed array: `array($offset, $count)` + - an associative array: `array('offset' => $offset, 'count' => $count)` + +- The method `Predis\Client::__construct()` now accepts also instances of + `Predis\ConnectionParameters`. + +- `Predis\MultiExecBlock` and `Predis\PubSubContext` now throw an exception + when trying to create their instances using a profile that does not + support the required Redis commands or when the client is connected to + a cluster of connections. + +- Various improvements to `Predis\MultiExecBlock`: + - fixes and more consistent behaviour across various usage cases. + - support for `WATCH` and `UNWATCH` when using the current development + profile (Redis v2.2) and aborted transactions. + +- New signature for `Predis\Client::multiExec()` which is now able to accept + an array of options for the underlying instance of `Predis\MultiExecBlock`. + Backwards compatibility with previous releases of Predis is ensured. + +- New signature for `Predis\Client::pipeline()` which is now able to accept + an array of options for the underlying instance of Predis\CommandPipeline. + Backwards compatibility with previous releases of Predis is ensured. + The method `Predis\Client::pipelineSafe()` is to be considered deprecated. + +- __FIX__: The `WEIGHT` modifier for `ZUNIONSTORE` and `ZINTERSTORE` was + handled incorrectly with more than two weights specified. + + +v0.6.0 (2010-05-24) +================================================================================ + +- Switched to the new multi-bulk request protocol for all of the commands + in the Redis 1.2 and Redis 2.0 profiles. Inline and bulk requests are now + deprecated as they will be removed in future releases of Redis. + +- The default server profile is `2.0` (targeting Redis 2.0.x). If you are + using older versions of Redis, it is highly recommended that you specify + which server profile the client should use (e.g. `1.2` when connecting + to instances of Redis 1.2.x). + +- Support for Redis 1.0 is now optional and it is provided by requiring + 'Predis_Compatibility.php' before creating an instance of `Predis\Client`. + +- New commands added to the Redis 2.0 profile since Predis 0.5.1: + - Strings: `SETEX`, `APPEND`, `SUBSTR` + - ZSets : `ZCOUNT`, `ZRANK`, `ZUNIONSTORE`, `ZINTERSTORE`, `ZREMBYRANK`, + `ZREVRANK` + - Hashes : `HSET`, `HSETNX`, `HMSET`, `HINCRBY`, `HGET`, `HMGET`, `HDEL`, + `HEXISTS`, `HLEN`, `HKEYS`, `HVALS`, `HGETALL` + - PubSub : `PUBLISH`, `SUBSCRIBE`, `UNSUBSCRIBE` + - Misc. : `DISCARD`, `CONFIG` + +- Introduced client-level options with the new `Predis\ClientOptions` class. + Options can be passed to the constructor of `Predis\Client` in its second + argument as an array or an instance of `Predis\ClientOptions`. For brevity's + sake and compatibility with older versions, the constructor still accepts + an instance of `Predis\RedisServerProfile` in its second argument. The + currently supported client options are: + + - `profile` [default: `2.0` as of Predis 0.6.0]: specifies which server + profile to use when connecting to Redis. This option accepts an instance + of `Predis\RedisServerProfile` or a string that indicates the version. + + - `key_distribution` [default: `Predis\Distribution\HashRing`]: specifies + which key distribution strategy to use to distribute keys among the + servers that compose a cluster. This option accepts an instance of + `Predis\Distribution\IDistributionStrategy` so that users can implement + their own key distribution strategy. `Predis\Distribution\KetamaPureRing` + is an alternative distribution strategy providing a pure-PHP implementation + of the same algorithm used by libketama. + + - `throw_on_error` [default: `TRUE`]: server errors can optionally be handled + "silently": instead of throwing an exception, the client returns an error + response type. + + - `iterable_multibulk` [EXPERIMENTAL - default: `FALSE`]: in addition to the + classic way of fetching a whole multibulk reply into an array, the client + can now optionally stream a multibulk reply down to the user code by using + PHP iterators. It is just a little bit slower, but it can save a lot of + memory in certain scenarios. + +- New parameters for connections: + + - `alias` [default: not set]: every connection can now be identified by an + alias that is useful to get a specific connections when connected to a + cluster of Redis servers. + - `weight` [default: not set]: allows to balance keys asymmetrically across + multiple servers. This is useful when you have servers with different + amounts of memory to distribute the load of your keys accordingly. + - `connection_async` [default: `FALSE`]: estabilish connections to servers + in a non-blocking way, so that the client is not blocked while the socket + resource performs the actual connection. + - `connection_persistent` [default: `FALSE`]: the underlying socket resource + is left open when a script ends its lifecycle. Persistent connections can + lead to unpredictable or strange behaviours, so they should be used with + extreme care. + +- Introduced the `Predis\Pipeline\IPipelineExecutor` interface. Classes that + implements this interface are used internally by the `Predis\CommandPipeline` + class to change the behaviour of the pipeline when writing/reading commands + from one or multiple servers. Here is the list of the default executors: + + - `Predis\Pipeline\StandardExecutor`: exceptions generated by server errors + might be thrown depending on the options passed to the client (see the + `throw_on_error` client option). Instead, protocol or network errors always + throw exceptions. This is the default executor for single and clustered + connections and shares the same behaviour of Predis 0.5.x. + - `Predis\Pipeline\SafeExecutor`: exceptions generated by server, protocol + or network errors are not thrown but returned in the response array as + instances of `Predis\ResponseError` or `Predis\CommunicationException`. + - `Predis\Pipeline\SafeClusterExecutor`: this executor shares the same + behaviour of `Predis\Pipeline\SafeExecutor` but it is geared towards + clustered connections. + +- Support for PUB/SUB is handled by the new `Predis\PubSubContext` class, which + could also be used to build a callback dispatcher for PUB/SUB scenarios. + +- When connected to a cluster of connections, it is now possible to get a + new `Predis\Client` instance for a single connection of the cluster by + passing its alias/index to the new `Predis\Client::getClientFor()` method. + +- `Predis\CommandPipeline` and `Predis\MultiExecBlock` return their instances + when invokink commands, thus allowing method chaining in pipelines and + multi-exec blocks. + +- `Predis\MultiExecBlock` can handle the new `DISCARD` command. + +- Connections now support float values for the `connection_timeout` parameter + to express timeouts with a microsecond resolution. + +- __FIX__: TCP connections now respect the read/write timeout parameter when + reading the payload of server responses. Previously, `stream_get_contents()` + was being used internally to read data from a connection but it looks like + PHP does not honour the specified timeout for socket streams when inside + this function. + +- __FIX__: The `GET` parameter for the `SORT` command now accepts also multiple + key patterns by passing an array of strings. (ISSUE #1). + +* __FIX__: Replies to the `DEL` command return the number of elements deleted + by the server and not 0 or 1 interpreted as a boolean response. (ISSUE #4). + + +v0.5.1 (2010-01-23) +================================================================================ + +* `RPOPLPUSH` has been changed from bulk command to inline command in Redis + 1.2.1, so `ListPopLastPushHead` now extends `InlineCommand`. The old behavior + is still available via the `ListPopLastPushHeadBulk` class so that you can + override the server profile if you need the old (and uncorrect) behaviour + when connecting to a Redis 1.2.0 instance. + +* Added missing support for `BGREWRITEAOF` for Redis >= 1.2.0. + +* Implemented a factory method for the `RedisServerProfile` class to ease the + creation of new server profile instances based on a version string. + + +v0.5.0 (2010-01-09) +================================================================================ +* First versioned release of Predis diff --git a/vendor/predis/predis/CONTRIBUTING.md b/vendor/predis/predis/CONTRIBUTING.md new file mode 100644 index 00000000..9a5e96a3 --- /dev/null +++ b/vendor/predis/predis/CONTRIBUTING.md @@ -0,0 +1,44 @@ +## Filing bug reports ## + +Bugs or feature requests can be posted on the [GitHub issues](http://github.com/nrk/predis/issues) +section of the project. + +When reporting bugs, in addition to the obvious description of your issue you __must__ always provide +some essential information about your environment such as: + + 1. version of Predis (check the `VERSION` file or the `Predis\Client::VERSION` constant). + 2. version of Redis (check `redis_version` returned by [`INFO`](http://redis.io/commands/info)). + 3. version of PHP. + 4. name and version of the operating system. + 5. when possible, a small snippet of code that reproduces the issue. + +__Think about it__: we do not have a crystal ball and cannot predict things or peer into the unknown +so please provide as much details as possible to help us isolating issues and fix them. + +__Never__ use GitHub issues to post generic questions about Predis! When you have questions about +how Predis works or how it can be used, please just hop me an email and I will get back to you as +soon as possible. + + +## Contributing code ## + +If you want to work on Predis, it is highly recommended that you first run the test suite in order +to check that everything is OK and report strange behaviours or bugs. When modifying Predis please +make sure that no warnings or notices are emitted by PHP running the interpreter in your development +environment with the `error_reporting` variable set to `E_ALL | E_STRICT`. + +The recommended way to contribute to Predis is to fork the project on GitHub, create topic branches +on your newly created repository to fix bugs or add new features (possibly with tests covering your +modifications) and then open a pull request with a description of the applied changes. Obviously you +can use any other Git hosting provider of your preference. + +We always aim for consistency in our code base so you should follow basic coding rules as defined by +[PSR-1](https://github.com/php-fig/fig-standards/blob/master/accepted/PSR-1-basic-coding-standard.md) +and [PSR-2](https://github.com/php-fig/fig-standards/blob/master/accepted/PSR-2-coding-style-guide.md) +and stick with the conventions used in Predis to name classes and interfaces. Indentation should be +done with 4 spaces and code should be wrapped at 100 columns (please try to stay within this limit +even if the above mentioned official coding guidelines set the soft limit to 120 columns). + +Please follow these [commit guidelines](http://git-scm.com/book/ch5-2.html#Commit-Guidelines) when +committing your code to Git and always write a meaningful (not necessarily extended) description of +your changes before opening pull requests. diff --git a/vendor/predis/predis/FAQ.md b/vendor/predis/predis/FAQ.md new file mode 100644 index 00000000..991a2f4e --- /dev/null +++ b/vendor/predis/predis/FAQ.md @@ -0,0 +1,177 @@ +# Some frequently asked questions about Predis # +________________________________________________ + +### What is the point of Predis? ### + +The main point of Predis is about offering a highly customizable and extensible client for Redis, +that can be easily extended by developers while still being reasonabily fast. With Predis you can +swap almost any class with your own custom implementation: you can have custom connection classes, +new distribution strategies for client-side sharding, or handlers to replace or add Redis commands. +All of this can be achieved without messing with the source code of the library and directly in your +own application. Given the fast pace at which Redis is developed and adds new features, this can be +a great asset since it allows developers to add new and still missing features or commands or change +the standard behaviour of the library without the need to break dependencies in production code (at +least to some degree). + +### Does Predis support UNIX domain sockets and persistent connections? ### + +Yes. Obviously persistent connections actually work only when using PHP configured as a persistent +process reused by the web server (see [PHP-FPM](http://php-fpm.org)). + +### Does Predis support SSL-encrypted connections? ### + +Yes. Encrypted connections are mostly useful when connecting to Redis instances exposed by various +cloud hosting providers without the need to configure an SSL proxy, but you should also take into +account the general performances degradation especially during the connect() operation when the TLS +handshake must be performed to secure the connection. Persistent SSL-encrypted connections may help +in that respect, but they are supported only when running on PHP >= 7.0.0. + +### Does Predis support transparent (de)serialization of values? ### + +No and it will not ever do that by default. The reason behind this decision is that serialization is +usually something that developers prefer to customize depending on their needs and can not be easily +generalized when using Redis because of the many possible access patterns for your data. This does +not mean that it is impossible to have such a feature since you can leverage the extensibility of +this library to define your own serialization-aware commands. You can find more details about how to +do that [on this issue](http://github.com/nrk/predis/issues/29#issuecomment-1202624). + +### How can I force Predis to connect to Redis before sending any command? ### + +Explicitly connecting to Redis is usually not needed since the client initializes connections lazily +only when they are needed. Admittedly, this behavior can be inconvenient in certain scenarios when +you absolutely need to perform an upfront check to determine if the server is up and running and +eventually catch exceptions on failures. Forcing the client to open the underlying connection can be +done by invoking `Predis\Client::connect()`: + +```php +$client = new Predis\Client(); + +try { + $client->connect(); +} catch (Predis\Connection\ConnectionException $exception) { + // We could not connect to Redis! Your handling code goes here. +} + +$client->info(); +``` + +### How Predis abstracts Redis commands? ### + +The approach used to implement Redis commands is quite simple: by default each command follows the +same signature as defined on the [Redis documentation](http://redis.io/commands) which makes things +pretty easy if you already know how Redis works or you need to look up how to use certain commands. +Alternatively, variadic commands can accept an array for keys or values (depending on the command) +instead of a list of arguments. Commands such as [`RPUSH`](http://redis.io/commands/rpush) and +[`HMSET`](http://redis.io/commands/hmset) are great examples: + +```php +$client->rpush('my:list', 'value1', 'value2', 'value3'); // plain method arguments +$client->rpush('my:list', ['value1', 'value2', 'value3']); // single argument array + +$client->hmset('my:hash', 'field1', 'value1', 'field2', 'value2'); // plain method arguments +$client->hmset('my:hash', ['field1'=>'value1', 'field2'=>'value2']); // single named array +``` + +An exception to this rule is [`SORT`](http://redis.io/commands/sort) for which modifiers are passed +[using a named array](tests/Predis/Command/KeySortTest.php#L54-L75). + + +# Speaking about performances... # +_________________________________________________ + + +### Predis is a pure-PHP implementation: it can not be fast enough! ### + +It really depends, but most of the times the answer is: _yes, it is fast enough_. I will give you a +couple of easy numbers with a simple test that uses a single client and is executed by PHP 5.5.6 +against a local instance of Redis 2.8 that runs under Ubuntu 13.10 on a Intel Q6600: + +``` +21000 SET/sec using 12 bytes for both key and value. +21000 GET/sec while retrieving the very same values. +0.130 seconds to fetch 30000 keys using _KEYS *_. +``` + +How does it compare with [__phpredis__](http://github.com/nicolasff/phpredis), a nice C extension +providing an efficient client for Redis? + +``` +30100 SET/sec using 12 bytes for both key and value +29400 GET/sec while retrieving the very same values +0.035 seconds to fetch 30000 keys using "KEYS *"". +``` + +Wow __phpredis__ seems much faster! Well, we are comparing a C extension with a pure-PHP library so +lower numbers are quite expected but there is a fundamental flaw in them: is this really how you are +going to use Redis in your application? Are you really going to send thousands of commands using a +for-loop on each page request using a single client instance? If so... well I guess you are probably +doing something wrong. Also, if you need to `SET` or `GET` multiple keys you should definitely use +commands such as `MSET` and `MGET`. You can also use pipelining to get more performances when this +technique can be used. + +There is one more thing: we have tested the overhead of Predis by connecting on a localhost instance +of Redis but how these numbers change when we hit the physical network by connecting to remote Redis +instances? + +``` +Using Predis: +3200 SET/sec using 12 bytes for both key and value +3200 GET/sec while retrieving the very same values +0.132 seconds to fetch 30000 keys using "KEYS *". + +Using phpredis: +3500 SET/sec using 12 bytes for both key and value +3500 GET/sec while retrieving the very same values +0.045 seconds to fetch 30000 keys using "KEYS *". +``` + +There you go, you get almost the same average numbers and the reason is simple: network latency is a +real performance killer and you cannot do (almost) anything about that. As a disclaimer, remember +that we are measuring the overhead of client libraries implementations and the effects of network +round-trip times, so we are not really measuring how fast Redis is. Redis shines best with thousands +of concurrent clients doing requests! Also, actual performances should be measured according to how +your application will use Redis. + +### I am convinced, but performances for multi-bulk responses are still worse ### + +Fair enough, but there is an option available if you need even more speed and consists on installing +__[phpiredis](http://github.com/nrk/phpiredis)__ (note the additional _i_ in the name) and let the +client use it. __phpiredis__ is another C extension that wraps __hiredis__ (the official C client +library for Redis) with a thin layer exposing its features to PHP. You can then choose between two +different connection classes: + + - `Predis\Connection\PhpiredisStreamConnection` (using native PHP streams). + - `Predis\Connection\PhpiredisSocketConnection` (requires `ext-socket`). + +You will now get the benefits of a faster protocol serializer and parser just by adding a couple of +lines of code: + +```php +$client = new Predis\Client('tcp://127.0.0.1', array( + 'connections' => array( + 'tcp' => 'Predis\Connection\PhpiredisStreamConnection', + 'unix' => 'Predis\Connection\PhpiredisSocketConnection', + ), +)); +``` + +Dead simple. Nothing changes in the way you use the library in your application. So how fast is it +our basic benchmark script now? There are not much improvements for inline or short bulk responses +like the ones returned by `SET` and `GET`, but the speed for parsing multi-bulk responses is now on +par with phpredis: + +``` +Fatching 30000 keys with _KEYS *_ using Predis paired with phpiredis:: + +0.035 seconds from a local Redis instance +0.047 seconds from a remote Redis instance +``` + +### If I need an extension to get better performances, why not using phpredis? ### + +Good question. Generically speaking if you need absolute uber-speed using Redis on the localhost and +you do not care about abstractions built around some Redis features such as MULTI / EXEC, or if you +do not need any kind of extensibility or guaranteed backwards compatibility with different versions +of Redis (Predis currently supports from 1.2 up to 2.8 and the current development version), then +using __phpredis__ makes absolutely sense. Otherwise, Predis is perfect for the job and by adding +__phpiredis__ you can get a nice speed bump almost for free. diff --git a/vendor/predis/predis/LICENSE b/vendor/predis/predis/LICENSE new file mode 100644 index 00000000..96133e90 --- /dev/null +++ b/vendor/predis/predis/LICENSE @@ -0,0 +1,22 @@ +Copyright (c) 2009-2016 Daniele Alessandri + +Permission is hereby granted, free of charge, to any person +obtaining a copy of this software and associated documentation +files (the "Software"), to deal in the Software without +restriction, including without limitation the rights to use, +copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the +Software is furnished to do so, subject to the following +conditions: + +The above copyright notice and this permission notice shall be +included in all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, +EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES +OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT +HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, +WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR +OTHER DEALINGS IN THE SOFTWARE. diff --git a/vendor/predis/predis/README.md b/vendor/predis/predis/README.md new file mode 100644 index 00000000..1190cd3c --- /dev/null +++ b/vendor/predis/predis/README.md @@ -0,0 +1,492 @@ +# Predis # + +[![Software license][ico-license]](LICENSE) +[![Latest stable][ico-version-stable]][link-packagist] +[![Latest development][ico-version-dev]][link-packagist] +[![Monthly installs][ico-downloads-monthly]][link-downloads] +[![Build status][ico-travis]][link-travis] +[![HHVM support][ico-hhvm]][link-hhvm] +[![Gitter room][ico-gitter]][link-gitter] + +Flexible and feature-complete [Redis](http://redis.io) client for PHP >= 5.3 and HHVM >= 2.3.0. + +Predis does not require any additional C extension by default, but it can be optionally paired with +[phpiredis](https://github.com/nrk/phpiredis) to lower the overhead of the serialization and parsing +of the [Redis RESP Protocol](http://redis.io/topics/protocol). For an __experimental__ asynchronous +implementation of the client you can refer to [Predis\Async](https://github.com/nrk/predis-async). + +More details about this project can be found on the [frequently asked questions](FAQ.md). + + +## Main features ## + +- Support for different versions of Redis (from __2.0__ to __3.2__) using profiles. +- Support for clustering using client-side sharding and pluggable keyspace distributors. +- Support for [redis-cluster](http://redis.io/topics/cluster-tutorial) (Redis >= 3.0). +- Support for master-slave replication setups and [redis-sentinel](http://redis.io/topics/sentinel). +- Transparent key prefixing of keys using a customizable prefix strategy. +- Command pipelining on both single nodes and clusters (client-side sharding only). +- Abstraction for Redis transactions (Redis >= 2.0) and CAS operations (Redis >= 2.2). +- Abstraction for Lua scripting (Redis >= 2.6) and automatic switching between `EVALSHA` or `EVAL`. +- Abstraction for `SCAN`, `SSCAN`, `ZSCAN` and `HSCAN` (Redis >= 2.8) based on PHP iterators. +- Connections are established lazily by the client upon the first command and can be persisted. +- Connections can be established via TCP/IP (also TLS/SSL-encrypted) or UNIX domain sockets. +- Support for [Webdis](http://webd.is) (requires both `ext-curl` and `ext-phpiredis`). +- Support for custom connection classes for providing different network or protocol backends. +- Flexible system for defining custom commands and profiles and override the default ones. + + +## How to _install_ and use Predis ## + +This library can be found on [Packagist](http://packagist.org/packages/predis/predis) for an easier +management of projects dependencies using [Composer](http://packagist.org/about-composer) or on our +[own PEAR channel](http://pear.nrk.io) for a more traditional installation using PEAR. Ultimately, +compressed archives of each release are [available on GitHub](https://github.com/nrk/predis/tags). + + +### Loading the library ### + +Predis relies on the autoloading features of PHP to load its files when needed and complies with the +[PSR-4 standard](https://github.com/php-fig/fig-standards/blob/master/accepted/PSR-4-autoloader.md). +Autoloading is handled automatically when dependencies are managed through Composer, but it is also +possible to leverage its own autoloader in projects or scripts lacking any autoload facility: + +```php +// Prepend a base path if Predis is not available in your "include_path". +require 'Predis/Autoloader.php'; + +Predis\Autoloader::register(); +``` + +It is also possible to create a [phar](http://www.php.net/manual/en/intro.phar.php) archive directly +from the repository by launching the `bin/create-phar` script. The generated phar already contains a +stub defining its own autoloader, so you just need to `require()` it to start using the library. + + +### Connecting to Redis ### + +When creating a client instance without passing any connection parameter, Predis assumes `127.0.0.1` +and `6379` as default host and port. The default timeout for the `connect()` operation is 5 seconds: + +```php +$client = new Predis\Client(); +$client->set('foo', 'bar'); +$value = $client->get('foo'); +``` + +Connection parameters can be supplied either in the form of URI strings or named arrays. The latter +is the preferred way to supply parameters, but URI strings can be useful when parameters are read +from non-structured or partially-structured sources: + +```php +// Parameters passed using a named array: +$client = new Predis\Client([ + 'scheme' => 'tcp', + 'host' => '10.0.0.1', + 'port' => 6379, +]); + +// Same set of parameters, passed using an URI string: +$client = new Predis\Client('tcp://10.0.0.1:6379'); +``` + +It is also possible to connect to local instances of Redis using UNIX domain sockets, in this case +the parameters must use the `unix` scheme and specify a path for the socket file: + +```php +$client = new Predis\Client(['scheme' => 'unix', 'path' => '/path/to/redis.sock']); +$client = new Predis\Client('unix:/path/to/redis.sock'); +``` + +The client can leverage TLS/SSL encryption to connect to secured remote Redis instances without the +need to configure an SSL proxy like stunnel. This can be useful when connecting to nodes running on +various cloud hosting providers. Encryption can be enabled with using the `tls` scheme and an array +of suitable [options](http://php.net/manual/context.ssl.php) passed via the `ssl` parameter: + +```php +// Named array of connection parameters: +$client = new Predis\Client([ + 'scheme' => 'tls', + 'ssl' => ['cafile' => 'private.pem', 'verify_peer' => true], +] + +// Same set of parameters, but using an URI string: +$client = new Predis\Client('tls://127.0.0.1?ssl[cafile]=private.pem&ssl[verify_peer]=1'); +``` + +The connection schemes [`redis`](http://www.iana.org/assignments/uri-schemes/prov/redis) (alias of +`tcp`) and [`rediss`](http://www.iana.org/assignments/uri-schemes/prov/rediss) (alias of `tls`) are +also supported, with the difference that URI strings containing these schemes are parsed following +the rules described on their respective IANA provisional registration documents. + +The actual list of supported connection parameters can vary depending on each connection backend so +it is recommended to refer to their specific documentation or implementation for details. + +When an array of connection parameters is provided, Predis automatically works in cluster mode using +client-side sharding. Both named arrays and URI strings can be mixed when providing configurations +for each node: + +```php +$client = new Predis\Client([ + 'tcp://10.0.0.1?alias=first-node', + ['host' => '10.0.0.2', 'alias' => 'second-node'], +]); +``` + +See the [aggregate connections](#aggregate-connections) section of this document for more details. + +Connections to Redis are lazy meaning that the client connects to a server only if and when needed. +While it is recommended to let the client do its own stuff under the hood, there may be times when +it is still desired to have control of when the connection is opened or closed: this can easily be +achieved by invoking `$client->connect()` and `$client->disconnect()`. Please note that the effect +of these methods on aggregate connections may differ depending on each specific implementation. + + +### Client configuration ### + +Many aspects and behaviors of the client can be configured by passing specific client options to the +second argument of `Predis\Client::__construct()`: + +```php +$client = new Predis\Client($parameters, ['profile' => '2.8', 'prefix' => 'sample:']); +``` + +Options are managed using a mini DI-alike container and their values can be lazily initialized only +when needed. The client options supported by default in Predis are: + + - `profile`: specifies the profile to use to match a specific version of Redis. + - `prefix`: prefix string automatically applied to keys found in commands. + - `exceptions`: whether the client should throw or return responses upon Redis errors. + - `connections`: list of connection backends or a connection factory instance. + - `cluster`: specifies a cluster backend (`predis`, `redis` or callable object). + - `replication`: specifies a replication backend (`TRUE`, `sentinel` or callable object). + - `aggregate`: overrides `cluster` and `replication` to provide a custom connections aggregator. + - `parameters`: list of default connection parameters for aggregate connections. + +Users can also provide custom options with values or callable objects (for lazy initialization) that +are stored in the options container for later use through the library. + + +### Aggregate connections ### + +Aggregate connections are the foundation upon which Predis implements clustering and replication and +they are used to group multiple connections to single Redis nodes and hide the specific logic needed +to handle them properly depending on the context. Aggregate connections usually require an array of +connection parameters when creating a new client instance. + +#### Cluster #### + +By default, when no specific client options are set and an array of connection parameters is passed +to the client's constructor, Predis configures itself to work in clustering mode using a traditional +client-side sharding approach to create a cluster of independent nodes and distribute the keyspace +among them. This approach needs some form of external health monitoring of nodes and requires manual +operations to rebalance the keyspace when changing its configuration by adding or removing nodes: + +```php +$parameters = ['tcp://10.0.0.1', 'tcp://10.0.0.2', 'tcp://10.0.0.3']; + +$client = new Predis\Client($parameters); +``` + +Along with Redis 3.0, a new supervised and coordinated type of clustering was introduced in the form +of [redis-cluster](http://redis.io/topics/cluster-tutorial). This kind of approach uses a different +algorithm to distribute the keyspaces, with Redis nodes coordinating themselves by communicating via +a gossip protocol to handle health status, rebalancing, nodes discovery and request redirection. In +order to connect to a cluster managed by redis-cluster, the client requires a list of its nodes (not +necessarily complete since it will automatically discover new nodes if necessary) and the `cluster` +client options set to `redis`: + +```php +$parameters = ['tcp://10.0.0.1', 'tcp://10.0.0.2', 'tcp://10.0.0.3']; +$options = ['cluster' => 'redis']; + +$client = new Predis\Client($parameters, $options); +``` + +#### Replication #### + +The client can be configured to operate in a single master / multiple slaves setup to provide better +service availability. When using replication, Predis recognizes read-only commands and sends them to +a random slave in order to provide some sort of load-balancing and switches to the master as soon as +it detects a command that performs any kind of operation that would end up modifying the keyspace or +the value of a key. Instead of raising a connection error when a slave fails, the client attempts to +fall back to a different slave among the ones provided in the configuration. + +The basic configuration needed to use the client in replication mode requires one Redis server to be +identified as the master (this can be done via connection parameters using the `alias` parameter set +to `master`) and one or more servers acting as slaves: + +```php +$parameters = ['tcp://10.0.0.1?alias=master', 'tcp://10.0.0.2', 'tcp://10.0.0.3']; +$options = ['replication' => true]; + +$client = new Predis\Client($parameters, $options); +``` + +The above configuration has a static list of servers and relies entirely on the client's logic, but +it is possible to rely on [`redis-sentinel`](http://redis.io/topics/sentinel) for a more robust HA +environment with sentinel servers acting as a source of authority for clients for service discovery. +The minimum configuration required by the client to work with redis-sentinel is a list of connection +parameters pointing to a bunch of sentinel instances, the `replication` option set to `sentinel` and +the `service` option set to the name of the service: + +```php +$sentinels = ['tcp://10.0.0.1', 'tcp://10.0.0.2', 'tcp://10.0.0.3']; +$options = ['replication' => 'sentinel', 'service' => 'mymaster']; + +$client = new Predis\Client($sentinels, $options); +``` + +If the master and slave nodes are configured to require an authentication from clients, a password +must be provided via the global `parameters` client option. This option can also be used to specify +a different database index. The client options array would then look like this: + +```php +$options = [ + 'replication' => 'sentinel', + 'service' => 'mymaster', + 'parameters' => [ + 'password' => $secretpassword, + 'database' => 10, + ], +]; +``` + +While Predis is able to distinguish commands performing write and read-only operations, `EVAL` and +`EVALSHA` represent a corner case in which the client switches to the master node because it cannot +tell when a Lua script is safe to be executed on slaves. While this is indeed the default behavior, +when certain Lua scripts do not perform write operations it is possible to provide an hint to tell +the client to stick with slaves for their execution: + +```php +$parameters = ['tcp://10.0.0.1?alias=master', 'tcp://10.0.0.2', 'tcp://10.0.0.3']; +$options = ['replication' => function () { + // Set scripts that won't trigger a switch from a slave to the master node. + $strategy = new Predis\Replication\ReplicationStrategy(); + $strategy->setScriptReadOnly($LUA_SCRIPT); + + return new Predis\Connection\Aggregate\MasterSlaveReplication($strategy); +}]; + +$client = new Predis\Client($parameters, $options); +$client->eval($LUA_SCRIPT, 0); // Sticks to slave using `eval`... +$client->evalsha(sha1($LUA_SCRIPT), 0); // ... and `evalsha`, too. +``` + +The [`examples`](examples/) directory contains a few scripts that demonstrate how the client can be +configured and used to leverage replication in both basic and complex scenarios. + + +### Command pipelines ### + +Pipelining can help with performances when many commands need to be sent to a server by reducing the +latency introduced by network round-trip timings. Pipelining also works with aggregate connections. +The client can execute the pipeline inside a callable block or return a pipeline instance with the +ability to chain commands thanks to its fluent interface: + +```php +// Executes a pipeline inside the given callable block: +$responses = $client->pipeline(function ($pipe) { + for ($i = 0; $i < 1000; $i++) { + $pipe->set("key:$i", str_pad($i, 4, '0', 0)); + $pipe->get("key:$i"); + } +}); + +// Returns a pipeline that can be chained thanks to its fluent interface: +$responses = $client->pipeline()->set('foo', 'bar')->get('foo')->execute(); +``` + + +### Transactions ### + +The client provides an abstraction for Redis transactions based on `MULTI` and `EXEC` with a similar +interface to command pipelines: + +```php +// Executes a transaction inside the given callable block: +$responses = $client->transaction(function ($tx) { + $tx->set('foo', 'bar'); + $tx->get('foo'); +}); + +// Returns a transaction that can be chained thanks to its fluent interface: +$responses = $client->transaction()->set('foo', 'bar')->get('foo')->execute(); +``` + +This abstraction can perform check-and-set operations thanks to `WATCH` and `UNWATCH` and provides +automatic retries of transactions aborted by Redis when `WATCH`ed keys are touched. For an example +of a transaction using CAS you can see [the following example](examples/transaction_using_cas.php). + + +### Adding new commands ### + +While we try to update Predis to stay up to date with all the commands available in Redis, you might +prefer to stick with an old version of the library or provide a different way to filter arguments or +parse responses for specific commands. To achieve that, Predis provides the ability to implement new +command classes to define or override commands in the default server profiles used by the client: + +```php +// Define a new command by extending Predis\Command\Command: +class BrandNewRedisCommand extends Predis\Command\Command +{ + public function getId() + { + return 'NEWCMD'; + } +} + +// Inject your command in the current profile: +$client = new Predis\Client(); +$client->getProfile()->defineCommand('newcmd', 'BrandNewRedisCommand'); + +$response = $client->newcmd(); +``` + +There is also a method to send raw commands without filtering their arguments or parsing responses. +Users must provide the list of arguments for the command as an array, following the signatures as +defined by the [Redis documentation for commands](http://redis.io/commands): + +```php +$response = $client->executeRaw(['SET', 'foo', 'bar']); +``` + + +### Script commands ### + +While it is possible to leverage [Lua scripting](http://redis.io/commands/eval) on Redis 2.6+ using +directly [`EVAL`](http://redis.io/commands/eval) and [`EVALSHA`](http://redis.io/commands/evalsha), +Predis offers script commands as an higher level abstraction built upon them to make things simple. +Script commands can be registered in the server profile used by the client and are accessible as if +they were plain Redis commands, but they define Lua scripts that get transmitted to the server for +remote execution. Internally they use [`EVALSHA`](http://redis.io/commands/evalsha) by default and +identify a script by its SHA1 hash to save bandwidth, but [`EVAL`](http://redis.io/commands/eval) +is used as a fall back when needed: + +```php +// Define a new script command by extending Predis\Command\ScriptCommand: +class ListPushRandomValue extends Predis\Command\ScriptCommand +{ + public function getKeysCount() + { + return 1; + } + + public function getScript() + { + return <<getProfile()->defineCommand('lpushrand', 'ListPushRandomValue'); + +$response = $client->lpushrand('random_values', $seed = mt_rand()); +``` + + +### Customizable connection backends ### + +Predis can use different connection backends to connect to Redis. Two of them leverage a third party +extension such as [phpiredis](https://github.com/nrk/phpiredis) resulting in major performance gains +especially when dealing with big multibulk responses. While one is based on PHP streams, the other +is based on socket resources provided by `ext-socket`. Both support TCP/IP and UNIX domain sockets: + +```php +$client = new Predis\Client('tcp://127.0.0.1', [ + 'connections' => [ + 'tcp' => 'Predis\Connection\PhpiredisStreamConnection', // PHP stream resources + 'unix' => 'Predis\Connection\PhpiredisSocketConnection', // ext-socket resources + ], +]); +``` + +Developers can create their own connection classes to support whole new network backends, extend +existing classes or provide completely different implementations. Connection classes must implement +`Predis\Connection\NodeConnectionInterface` or extend `Predis\Connection\AbstractConnection`: + +```php +class MyConnectionClass implements Predis\Connection\NodeConnectionInterface +{ + // Implementation goes here... +} + +// Use MyConnectionClass to handle connections for the `tcp` scheme: +$client = new Predis\Client('tcp://127.0.0.1', [ + 'connections' => ['tcp' => 'MyConnectionClass'], +]); +``` + +For a more in-depth insight on how to create new connection backends you can refer to the actual +implementation of the standard connection classes available in the `Predis\Connection` namespace. + + +## Development ## + + +### Reporting bugs and contributing code ### + +Contributions to Predis are highly appreciated either in the form of pull requests for new features, +bug fixes, or just bug reports. We only ask you to adhere to a [basic set of rules](CONTRIBUTING.md) +before submitting your changes or filing bugs on the issue tracker to make it easier for everyone to +stay consistent while working on the project. + + +### Test suite ### + +__ATTENTION__: Do not ever run the test suite shipped with Predis against instances of Redis running +in production environments or containing data you are interested in! + +Predis has a comprehensive test suite covering every aspect of the library. This test suite performs +integration tests against a running instance of Redis (>= 2.4.0 is required) to verify the correct +behavior of the implementation of each command and automatically skips commands not defined in the +specified Redis profile. If you do not have Redis up and running, integration tests can be disabled. +By default the test suite is configured to execute integration tests using the profile for Redis 3.2 +(which is the current stable version of Redis) but can optionally target a Redis instance built from +the `unstable` branch by modifying `phpunit.xml` and setting `REDIS_SERVER_VERSION` to `dev` so that +the development server profile will be used. You can refer to [the tests README](tests/README.md) +for more detailed information about testing Predis. + +Predis uses Travis CI for continuous integration and the history for past and current builds can be +found [on its project page](http://travis-ci.org/nrk/predis). + + +## Other ## + + +### Project related links ### + +- [Source code](https://github.com/nrk/predis) +- [Wiki](https://wiki.github.com/nrk/predis) +- [Issue tracker](https://github.com/nrk/predis/issues) +- [PEAR channel](http://pear.nrk.io) + + +### Author ### + +- [Daniele Alessandri](mailto:suppakilla@gmail.com) ([twitter](http://twitter.com/JoL1hAHN)) + + +### License ### + +The code for Predis is distributed under the terms of the MIT license (see [LICENSE](LICENSE)). + +[ico-license]: https://img.shields.io/github/license/nrk/predis.svg?style=flat-square +[ico-version-stable]: https://img.shields.io/packagist/v/predis/predis.svg?style=flat-square +[ico-version-dev]: https://img.shields.io/packagist/vpre/predis/predis.svg?style=flat-square +[ico-downloads-monthly]: https://img.shields.io/packagist/dm/predis/predis.svg?style=flat-square +[ico-travis]: https://img.shields.io/travis/nrk/predis.svg?style=flat-square +[ico-hhvm]: https://img.shields.io/hhvm/predis/predis.svg?style=flat-square +[ico-gitter]: https://img.shields.io/gitter/room/nrk/predis.svg?style=flat-square + +[link-packagist]: https://packagist.org/packages/predis/predis +[link-travis]: https://travis-ci.org/nrk/predis +[link-downloads]: https://packagist.org/packages/predis/predis/stats +[link-hhvm]: http://hhvm.h4cc.de/package/predis/predis +[link-gitter]: https://gitter.im/nrk/predis diff --git a/vendor/predis/predis/VERSION b/vendor/predis/predis/VERSION new file mode 100644 index 00000000..b26afe97 --- /dev/null +++ b/vendor/predis/predis/VERSION @@ -0,0 +1 @@ +1.1.1 diff --git a/vendor/predis/predis/autoload.php b/vendor/predis/predis/autoload.php new file mode 100644 index 00000000..5139db1d --- /dev/null +++ b/vendor/predis/predis/autoload.php @@ -0,0 +1,14 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +require __DIR__.'/src/Autoloader.php'; + +Predis\Autoloader::register(); diff --git a/vendor/predis/predis/bin/create-command-test b/vendor/predis/predis/bin/create-command-test new file mode 100644 index 00000000..27aac05c --- /dev/null +++ b/vendor/predis/predis/bin/create-command-test @@ -0,0 +1,275 @@ +#!/usr/bin/env php + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +// -------------------------------------------------------------------------- // +// This script can be used to automatically generate a file with the scheleton +// of a test case to test a Redis command by specifying the name of the class +// in the Predis\Command namespace (only classes in this namespace are valid). +// For example, to generate a test case for SET (which is represented by the +// Predis\Command\StringSet class): +// +// $ ./bin/generate-command-test --class=StringSet +// +// Here is a list of optional arguments: +// +// --realm: each command has its own realm (commands that operate on strings, +// lists, sets and such) but while this realm is usually inferred from the name +// of the specified class, sometimes it can be useful to override it with a +// custom one. +// +// --output: write the generated test case to the specified path instead of +// the default one. +// +// --overwrite: pre-existing test files are not overwritten unless this option +// is explicitly specified. +// -------------------------------------------------------------------------- // + +use Predis\Command\CommandInterface; +use Predis\Command\PrefixableCommandInterface; + +class CommandTestCaseGenerator +{ + private $options; + + public function __construct(array $options) + { + if (!isset($options['class'])) { + throw new RuntimeException("Missing 'class' option."); + } + $this->options = $options; + } + + public static function fromCommandLine() + { + $parameters = array( + 'c:' => 'class:', + 'r::' => 'realm::', + 'o::' => 'output::', + 'x::' => 'overwrite::' + ); + + $getops = getopt(implode(array_keys($parameters)), $parameters); + + $options = array( + 'overwrite' => false, + 'tests' => __DIR__.'/../tests/Predis', + ); + + foreach ($getops as $option => $value) { + switch ($option) { + case 'c': + case 'class': + $options['class'] = $value; + break; + + case 'r': + case 'realm': + $options['realm'] = $value; + break; + + case 'o': + case 'output': + $options['output'] = $value; + break; + + case 'x': + case 'overwrite': + $options['overwrite'] = true; + break; + } + } + + if (!isset($options['class'])) { + throw new RuntimeException("Missing 'class' option."); + } + + $options['fqn'] = "Predis\\Command\\{$options['class']}"; + $options['path'] = "Command/{$options['class']}.php"; + + $source = __DIR__.'/../src/'.$options['path']; + if (!file_exists($source)) { + throw new RuntimeException("Cannot find class file for {$options['fqn']} in $source."); + } + + if (!isset($options['output'])) { + $options['output'] = sprintf("%s/%s", $options['tests'], str_replace('.php', 'Test.php', $options['path'])); + } + + return new self($options); + } + + protected function getTestRealm() + { + if (isset($this->options['realm'])) { + if (!$this->options['realm']) { + throw new RuntimeException('Invalid value for realm has been sepcified (empty).'); + } + return $this->options['realm']; + } + + $fqnParts = explode('\\', $this->options['fqn']); + $class = array_pop($fqnParts); + list($realm,) = preg_split('/([[:upper:]][[:lower:]]+)/', $class, 2, PREG_SPLIT_DELIM_CAPTURE | PREG_SPLIT_NO_EMPTY); + + return strtolower($realm); + } + + public function generate() + { + $reflection = new ReflectionClass($class = $this->options['fqn']); + + if (!$reflection->isInstantiable()) { + throw new RuntimeException("Class $class must be instantiable, abstract classes or interfaces are not allowed."); + } + if (!$reflection->implementsInterface('Predis\Command\CommandInterface')) { + throw new RuntimeException("Class $class must implement Predis\Command\CommandInterface."); + } + + /* + * @var CommandInterface + */ + $instance = $reflection->newInstance(); + + $buffer = $this->getTestCaseBuffer($instance); + + return $buffer; + } + + public function save() + { + $options = $this->options; + if (file_exists($options['output']) && !$options['overwrite']) { + throw new RuntimeException("File {$options['output']} already exist. Specify the --overwrite option to overwrite the existing file."); + } + file_put_contents($options['output'], $this->generate()); + } + + protected function getTestCaseBuffer(CommandInterface $instance) + { + $id = $instance->getId(); + $fqn = get_class($instance); + $fqnParts = explode('\\', $fqn); + $class = array_pop($fqnParts) . "Test"; + $realm = $this->getTestRealm(); + + $buffer =<< + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @group commands + * @group realm-$realm + */ +class $class extends PredisCommandTestCase +{ + /** + * {@inheritdoc} + */ + protected function getExpectedCommand() + { + return '$fqn'; + } + + /** + * {@inheritdoc} + */ + protected function getExpectedId() + { + return '$id'; + } + + /** + * @group disconnected + */ + public function testFilterArguments() + { + \$this->markTestIncomplete('This test has not been implemented yet.'); + + \$arguments = array(/* add arguments */); + \$expected = array(/* add arguments */); + + \$command = \$this->getCommand(); + \$command->setArguments(\$arguments); + + \$this->assertSame(\$expected, \$command->getArguments()); + } + + /** + * @group disconnected + */ + public function testParseResponse() + { + \$this->markTestIncomplete('This test has not been implemented yet.'); + + \$raw = null; + \$expected = null; + + \$command = \$this->getCommand(); + + \$this->assertSame(\$expected, \$command->parseResponse(\$raw)); + } + +PHP; + + if ($instance instanceof PrefixableCommandInterface) { + $buffer .=<<markTestIncomplete('This test has not been implemented yet.'); + + \$arguments = array(/* add arguments */); + \$expected = array(/* add arguments */); + + \$command = \$this->getCommandWithArgumentsArray(\$arguments); + \$command->prefixKeys('prefix:'); + + \$this->assertSame(\$expected, \$command->getArguments()); + } + + /** + * @group disconnected + */ + public function testPrefixKeysIgnoredOnEmptyArguments() + { + \$command = \$this->getCommand(); + \$command->prefixKeys('prefix:'); + + \$this->assertSame(array(), \$command->getArguments()); + } + +PHP; + } + + return "$buffer}\n"; + } +} + +// ------------------------------------------------------------------------- // + +require __DIR__.'/../autoload.php'; + +$generator = CommandTestCaseGenerator::fromCommandLine(); +$generator->save(); diff --git a/vendor/predis/predis/bin/create-pear b/vendor/predis/predis/bin/create-pear new file mode 100644 index 00000000..ac82a9de --- /dev/null +++ b/vendor/predis/predis/bin/create-pear @@ -0,0 +1,233 @@ +#!/usr/bin/env php + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +// -------------------------------------------------------------------------- // +// In order to be able to execute this script to create a PEAR package of Predis +// the `pear` binary must be available and executable in your $PATH. +// The parts used to parse author and version strings are taken from Onion (used +// by this library in the past) just to keep on relying on the package.ini file +// to simplify things. We might consider to switch to using the PEAR classes +// directly in the future. +// -------------------------------------------------------------------------- // + +function executeWithBackup($file, $callback) +{ + $exception = null; + $backup = "$file.backup"; + + copy($file, $backup); + + try { + call_user_func($callback, $file); + } catch (Exception $exception) { + // NOOP + } + + unlink($file); + rename($backup, $file); + + if ($exception) { + throw $exception; + } +} + +function parseAuthor($string) +{ + $author = array(); + + if (preg_match('/^\s*(.+?)\s*(?:"(\S+)"\s*)?<(\S+)>\s*$/x', $string , $regs)) { + if (count($regs) == 4) { + list($_,$name,$user,$email) = $regs; + $author['name'] = $name; + $author['user'] = $user; + $author['email'] = $email; + } elseif (count($regs) == 3) { + list($_,$name,$email) = $regs; + $author['name'] = $name; + $author['email'] = $email; + } + } else { + $author['name'] = $string; + } + + return $author; +} + +function parseVersion($string) +{ + $version_pattern = '([0-9.]+)'; + + if (preg_match("/^\s*$version_pattern\s*\$/x", $string, $regs)) { + return array('min' => $regs[1] ?: '0.0.0'); + } elseif (preg_match("/^\s*[>=]+\s*$version_pattern\s*\$/x", $string, $regs)) { + return array('min' => $regs[1] ?: '0.0.0'); + } elseif (preg_match("/^\s*[<=]+\s*$version_pattern\s*\$/x", $string, $regs)) { + return array('max' => $regs[1]); + } elseif (preg_match("/^\s*$version_pattern\s*<=>\s*$version_pattern\s*\$/x", $string, $regs)) { + return array( + 'min' => $regs[1] ?: '0.0.0', + 'max' => $regs[2], + ); + } + + return null; +} + +function addRolePath($pkg, $path, $role) +{ + if (is_dir($path)) { + $dirRoot = new RecursiveDirectoryIterator($path, RecursiveDirectoryIterator::SKIP_DOTS); + $dirTree = new RecursiveIteratorIterator($dirRoot, RecursiveIteratorIterator::CHILD_FIRST); + + foreach ($dirTree as $fileinfo) { + if ($fileinfo->isFile()) { + addPackageFile($pkg, $fileinfo, $role, $path); + } + } + } else { + foreach (glob($path) as $filename) { + addPackageFile($pkg, new SplFileInfo($filename), $role); + } + } +} + +function addPackageFile($pkg, $fileinfo, $role, $baseDir = '') +{ + $fileNode = $pkg->contents->dir->addChild('file'); + $fileNode->addAttribute('name', $filepath = $fileinfo->getPathname()); + $fileNode->addAttribute('role', $role); + $fileNode->addAttribute('md5sum', md5_file($filepath)); + + $installNode = $pkg->phprelease->filelist->addChild('install'); + $installNode->addAttribute('name', $filepath); + $installNode->addAttribute('as', !$baseDir ? basename($filepath) : substr($filepath, strlen($baseDir) + 1)); +} + +function generatePackageXml($packageINI) +{ + $XML = << + +XML; + + $cfg = parse_ini_file($packageINI, true); + $pkg = new SimpleXMLElement($XML); + + $pkg->name = $cfg['package']['name']; + $pkg->channel = $cfg['package']['channel']; + $pkg->summary = $cfg['package']['desc']; + $pkg->description = $cfg['package']['desc']; + + $author = parseAuthor($cfg['package']['author']); + $pkg->addChild('lead'); + $pkg->lead->name = $author['name']; + $pkg->lead->user = $author['user']; + $pkg->lead->email = $author['email']; + $pkg->lead->active = 'yes'; + + $datetime = new DateTime('now'); + $pkg->date = $datetime->format('Y-m-d'); + $pkg->time = $datetime->format('H:i:s'); + + $pkg->addChild('version'); + $pkg->version->release = $cfg['package']['version']; + $pkg->version->api = $cfg['package']['version']; + + $pkg->addChild('stability'); + $pkg->stability->release = $cfg['package']['stability']; + $pkg->stability->api = $cfg['package']['stability']; + + $pkg->license = $cfg['package']['license']; + $pkg->notes = '-'; + + $pkg->addChild('contents')->addChild('dir')->addAttribute('name', '/'); + + $pkg->addChild('dependencies')->addChild('required'); + foreach ($cfg['require'] as $required => $version) { + $version = parseVersion($version); + $pkg->dependencies->required->addChild($required); + + if (isset($version['min'])) { + $pkg->dependencies->required->$required->min = $version['min']; + } + if (isset($version['max'])) { + $pkg->dependencies->required->$required->min = $version['max']; + } + } + + $pkg->addChild('phprelease')->addChild('filelist'); + + $pathToRole = array( + 'doc' => 'doc', 'docs' => 'doc', 'examples' => 'doc', + 'lib' => 'php', 'src' => 'php', + 'test' => 'test', 'tests' => 'test', + ); + + foreach (array_merge($pathToRole, $cfg['roles'] ?: array()) as $path => $role) { + addRolePath($pkg, $path, $role); + } + + return $pkg; +} + +function rewritePackageInstallAs($pkg) +{ + foreach ($pkg->phprelease->filelist->install as $file) { + if (preg_match('/^src\//', $file['name'])) { + $file['as'] = "Predis/{$file['as']}"; + } + } +} + +function savePackageXml($xml) +{ + $dom = new DOMDocument("1.0"); + $dom->preserveWhiteSpace = false; + $dom->formatOutput = true; + $dom->loadXML($xml->asXML()); + + file_put_contents('package.xml', $dom->saveXML()); +} + +function buildPackage() +{ + passthru('pear -q package && rm package.xml'); +} + +function modifyPhpunitXml($file) +{ + $cfg = new SimpleXMLElement($file, null, true); + + $cfg[0]['bootstrap'] = str_replace('tests/', '', $cfg[0]['bootstrap']); + $cfg->testsuites->testsuite->directory = str_replace('tests/', '', $cfg->testsuites->testsuite->directory); + + $cfg->saveXml($file); +} + +// -------------------------------------------------------------------------- // + +executeWithBackup(__DIR__.'/../phpunit.xml.dist', function ($file) { + modifyPhpunitXml($file); + + $pkg = generatePackageXml('package.ini'); + rewritePackageInstallAs($pkg); + savePackageXml($pkg); + + buildPackage(); +}); diff --git a/vendor/predis/predis/bin/create-phar b/vendor/predis/predis/bin/create-phar new file mode 100644 index 00000000..12040c5a --- /dev/null +++ b/vendor/predis/predis/bin/create-phar @@ -0,0 +1,71 @@ +#!/usr/bin/env php + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +// -------------------------------------------------------------------------- // +// In order to be able to execute this script to create a Phar archive of Predis, +// the Phar module must be loaded and the "phar.readonly" directive php.ini must +// be set to "off". You can change the values in the $options array to customize +// the creation of the Phar archive to better suit your needs. +// -------------------------------------------------------------------------- // + +$options = array( + 'name' => 'predis', + 'project_path' => __DIR__ . '/../src', + 'compression' => Phar::NONE, + 'append_version' => true, +); + +function getPharFilename($options) +{ + $filename = $options['name']; + + // NOTE: do not consider "append_version" with Phar compression do to a bug in + // Phar::compress() when renaming phar archives containing dots in their name. + if ($options['append_version'] && $options['compression'] === Phar::NONE) { + $versionFile = @fopen(__DIR__ . '/../VERSION', 'r'); + + if ($versionFile === false) { + throw new Exception("Could not locate the VERSION file."); + } + + $version = trim(fgets($versionFile)); + fclose($versionFile); + $filename .= "_$version"; + } + + return "$filename.phar"; +} + +function getPharStub($options) +{ + return <<compress($options['compression']); +$phar->setStub(getPharStub($options)); +$phar->buildFromDirectory($options['project_path']); diff --git a/vendor/predis/predis/bin/create-single-file b/vendor/predis/predis/bin/create-single-file new file mode 100644 index 00000000..28de9eec --- /dev/null +++ b/vendor/predis/predis/bin/create-single-file @@ -0,0 +1,662 @@ +#!/usr/bin/env php + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +// -------------------------------------------------------------------------- // +// This script can be used to automatically glue all the .php files of Predis +// into a single monolithic script file that can be used without an autoloader, +// just like the other previous versions of the library. +// +// Much of its complexity is due to the fact that we cannot simply join PHP +// files, but namespaces and classes definitions must follow a precise order +// when dealing with subclassing and inheritance. +// +// The current implementation is pretty naïve, but it should do for now. +// -------------------------------------------------------------------------- // + +class CommandLine +{ + public static function getOptions() + { + $parameters = array( + 's:' => 'source:', + 'o:' => 'output:', + 'e:' => 'exclude:', + 'E:' => 'exclude-classes:', + ); + + $getops = getopt(implode(array_keys($parameters)), $parameters); + + $options = array( + 'source' => __DIR__ . "/../src", + 'output' => PredisFile::NS_ROOT . '.php', + 'exclude' => array(), + ); + + foreach ($getops as $option => $value) { + switch ($option) { + case 's': + case 'source': + $options['source'] = $value; + break; + + case 'o': + case 'output': + $options['output'] = $value; + break; + + case 'E': + case 'exclude-classes': + $options['exclude'] = @file($value, FILE_IGNORE_NEW_LINES | FILE_SKIP_EMPTY_LINES) ?: $value; + break; + + case 'e': + case 'exclude': + $options['exclude'] = is_array($value) ? $value : array($value); + break; + } + } + + return $options; + } +} + +class PredisFile +{ + const NS_ROOT = 'Predis'; + + private $namespaces; + + public function __construct() + { + $this->namespaces = array(); + } + + public static function from($libraryPath, array $exclude = array()) + { + $predisFile = new PredisFile(); + $libIterator = new RecursiveDirectoryIterator($libraryPath); + + foreach (new RecursiveIteratorIterator($libIterator) as $classFile) + { + if (!$classFile->isFile()) { + continue; + } + + $namespace = self::NS_ROOT.strtr(str_replace($libraryPath, '', $classFile->getPath()), '/', '\\'); + + if (in_array(sprintf('%s\\%s', $namespace, $classFile->getBasename('.php')), $exclude)) { + continue; + } + + $phpNamespace = $predisFile->getNamespace($namespace); + + if ($phpNamespace === false) { + $phpNamespace = new PhpNamespace($namespace); + $predisFile->addNamespace($phpNamespace); + } + + $phpClass = new PhpClass($phpNamespace, $classFile); + } + + return $predisFile; + } + + public function addNamespace(PhpNamespace $namespace) + { + if (isset($this->namespaces[(string)$namespace])) { + throw new InvalidArgumentException("Duplicated namespace"); + } + $this->namespaces[(string)$namespace] = $namespace; + } + + public function getNamespaces() + { + return $this->namespaces; + } + + public function getNamespace($namespace) + { + if (!isset($this->namespaces[$namespace])) { + return false; + } + + return $this->namespaces[$namespace]; + } + + public function getClassByFQN($classFqn) + { + if (($nsLastPos = strrpos($classFqn, '\\')) !== false) { + $namespace = $this->getNamespace(substr($classFqn, 0, $nsLastPos)); + if ($namespace === false) { + return null; + } + $className = substr($classFqn, $nsLastPos + 1); + + return $namespace->getClass($className); + } + + return null; + } + + private function calculateDependencyScores(&$classes, $fqn) + { + if (!isset($classes[$fqn])) { + $classes[$fqn] = 0; + } + + $classes[$fqn] += 1; + + if (($phpClass = $this->getClassByFQN($fqn)) === null) { + throw new RuntimeException( + "Cannot found the class $fqn which is required by other subclasses. Are you missing a file?" + ); + } + + foreach ($phpClass->getDependencies() as $fqn) { + $this->calculateDependencyScores($classes, $fqn); + } + } + + private function getDependencyScores() + { + $classes = array(); + + foreach ($this->getNamespaces() as $phpNamespace) { + foreach ($phpNamespace->getClasses() as $phpClass) { + $this->calculateDependencyScores($classes, $phpClass->getFQN()); + } + } + + return $classes; + } + + private function getOrderedNamespaces($dependencyScores) + { + $namespaces = array_fill_keys(array_unique( + array_map( + function ($fqn) { return PhpNamespace::extractName($fqn); }, + array_keys($dependencyScores) + ) + ), 0); + + foreach ($dependencyScores as $classFqn => $score) { + $namespaces[PhpNamespace::extractName($classFqn)] += $score; + } + + arsort($namespaces); + + return array_keys($namespaces); + } + + private function getOrderedClasses(PhpNamespace $phpNamespace, $classes) + { + $nsClassesFQNs = array_map(function ($cl) { return $cl->getFQN(); }, $phpNamespace->getClasses()); + $nsOrderedClasses = array(); + + foreach ($nsClassesFQNs as $nsClassFQN) { + $nsOrderedClasses[$nsClassFQN] = $classes[$nsClassFQN]; + } + + arsort($nsOrderedClasses); + + return array_keys($nsOrderedClasses); + } + + public function getPhpCode() + { + $buffer = array("getDependencyScores(); + $namespaces = $this->getOrderedNamespaces($classes); + + foreach ($namespaces as $namespace) { + $phpNamespace = $this->getNamespace($namespace); + + // generate namespace directive + $buffer[] = $phpNamespace->getPhpCode(); + $buffer[] = "\n"; + + // generate use directives + $useDirectives = $phpNamespace->getUseDirectives(); + if (count($useDirectives) > 0) { + $buffer[] = $useDirectives->getPhpCode(); + $buffer[] = "\n"; + } + + // generate classes bodies + $nsClasses = $this->getOrderedClasses($phpNamespace, $classes); + foreach ($nsClasses as $classFQN) { + $buffer[] = $this->getClassByFQN($classFQN)->getPhpCode(); + $buffer[] = "\n\n"; + } + + $buffer[] = "/* " . str_repeat("-", 75) . " */"; + $buffer[] = "\n\n"; + } + + return implode($buffer); + } + + public function saveTo($outputFile) + { + // TODO: add more sanity checks + if ($outputFile === null || $outputFile === '') { + throw new InvalidArgumentException('You must specify a valid output file'); + } + file_put_contents($outputFile, $this->getPhpCode()); + } +} + +class PhpNamespace implements IteratorAggregate +{ + private $namespace; + private $classes; + + public function __construct($namespace) + { + $this->namespace = $namespace; + $this->classes = array(); + $this->useDirectives = new PhpUseDirectives($this); + } + + public static function extractName($fqn) + { + $nsSepLast = strrpos($fqn, '\\'); + if ($nsSepLast === false) { + return $fqn; + } + $ns = substr($fqn, 0, $nsSepLast); + + return $ns !== '' ? $ns : null; + } + + public function addClass(PhpClass $class) + { + $this->classes[$class->getName()] = $class; + } + + public function getClass($className) + { + if (isset($this->classes[$className])) { + return $this->classes[$className]; + } + } + + public function getClasses() + { + return array_values($this->classes); + } + + public function getIterator() + { + return new \ArrayIterator($this->getClasses()); + } + + public function getUseDirectives() + { + return $this->useDirectives; + } + + public function getPhpCode() + { + return "namespace $this->namespace;\n"; + } + + public function __toString() + { + return $this->namespace; + } +} + +class PhpUseDirectives implements Countable, IteratorAggregate +{ + private $use; + private $aliases; + private $reverseAliases; + private $namespace; + + public function __construct(PhpNamespace $namespace) + { + $this->namespace = $namespace; + $this->use = array(); + $this->aliases = array(); + $this->reverseAliases = array(); + } + + public function add($use, $as = null) + { + if (in_array($use, $this->use)) { + return; + } + + $rename = null; + $this->use[] = $use; + $aliasedClassName = $as ?: PhpClass::extractName($use); + + if (isset($this->aliases[$aliasedClassName])) { + $parentNs = $this->getParentNamespace(); + + if ($parentNs && false !== $pos = strrpos($parentNs, '\\')) { + $parentNs = substr($parentNs, $pos); + } + + $newAlias = "{$parentNs}_{$aliasedClassName}"; + $rename = (object) array( + 'namespace' => $this->namespace, + 'from' => $aliasedClassName, + 'to' => $newAlias, + ); + + $this->aliases[$newAlias] = $use; + $as = $newAlias; + } else { + $this->aliases[$aliasedClassName] = $use; + } + + if ($as !== null) { + $this->reverseAliases[$use] = $as; + } + + return $rename; + } + + public function getList() + { + return $this->use; + } + + public function getIterator() + { + return new \ArrayIterator($this->getList()); + } + + public function getPhpCode() + { + $reverseAliases = $this->reverseAliases; + + $reducer = function ($str, $use) use ($reverseAliases) { + if (isset($reverseAliases[$use])) { + return $str .= "use $use as {$reverseAliases[$use]};\n"; + } else { + return $str .= "use $use;\n"; + } + }; + + return array_reduce($this->getList(), $reducer, ''); + } + + public function getNamespace() + { + return $this->namespace; + } + + public function getParentNamespace() + { + if (false !== $pos = strrpos($this->namespace, '\\')) { + return substr($this->namespace, 0, $pos); + } + + return ''; + } + + public function getFQN($className) + { + if (($nsSepFirst = strpos($className, '\\')) === false) { + if (isset($this->aliases[$className])) { + return $this->aliases[$className]; + } + + return (string)$this->getNamespace() . "\\$className"; + } + + if ($nsSepFirst != 0) { + throw new InvalidArgumentException("Partially qualified names are not supported"); + } + + return $className; + } + + public function count() + { + return count($this->use); + } +} + +class PhpClass +{ + const LICENSE_HEADER = << + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ +LICENSE; + + private $namespace; + private $file; + private $body; + private $implements; + private $extends; + private $name; + + public function __construct(PhpNamespace $namespace, SplFileInfo $classFile) + { + $this->namespace = $namespace; + $this->file = $classFile; + $this->implements = array(); + $this->extends = array(); + + $this->extractData(); + $namespace->addClass($this); + } + + public static function extractName($fqn) + { + $nsSepLast = strrpos($fqn, '\\'); + if ($nsSepLast === false) { + return $fqn; + } + + return substr($fqn, $nsSepLast + 1); + } + + private function extractData() + { + $renames = array(); + $useDirectives = $this->getNamespace()->getUseDirectives(); + + $useExtractor = function ($m) use ($useDirectives, &$renames) { + array_shift($m); + + if (isset($m[1])) { + $m[1] = str_replace(" as ", '', $m[1]); + } + + if ($rename = call_user_func_array(array($useDirectives, 'add'), $m)) { + $renames[] = $rename; + } + }; + + $classBuffer = stream_get_contents(fopen($this->getFile()->getPathname(), 'r')); + + $classBuffer = str_replace(self::LICENSE_HEADER, '', $classBuffer); + + $classBuffer = preg_replace('/<\?php\s?\\n\s?/', '', $classBuffer); + $classBuffer = preg_replace('/\s?\?>\n?/ms', '', $classBuffer); + $classBuffer = preg_replace('/namespace\s+[\w\d_\\\\]+;\s?/', '', $classBuffer); + $classBuffer = preg_replace_callback('/use\s+([\w\d_\\\\]+)(\s+as\s+.*)?;\s?\n?/', $useExtractor, $classBuffer); + + foreach ($renames as $rename) { + $classBuffer = str_replace($rename->from, $rename->to, $classBuffer); + } + + $this->body = trim($classBuffer); + + $this->extractHierarchy(); + } + + private function extractHierarchy() + { + $implements = array(); + $extends = array(); + + $extractor = function ($iterator, $callback) { + $className = ''; + $iterator->seek($iterator->key() + 1); + + while ($iterator->valid()) { + $token = $iterator->current(); + + if (is_string($token)) { + if (preg_match('/\s?,\s?/', $token)) { + $callback(trim($className)); + $className = ''; + } else if ($token == '{') { + $callback(trim($className)); + return; + } + } + + switch ($token[0]) { + case T_NS_SEPARATOR: + $className .= '\\'; + break; + + case T_STRING: + $className .= $token[1]; + break; + + case T_IMPLEMENTS: + case T_EXTENDS: + $callback(trim($className)); + $iterator->seek($iterator->key() - 1); + return; + } + + $iterator->next(); + } + }; + + $tokens = token_get_all("getPhpCode())); + $iterator = new ArrayIterator($tokens); + + while ($iterator->valid()) { + $token = $iterator->current(); + if (is_string($token)) { + $iterator->next(); + continue; + } + + switch ($token[0]) { + case T_CLASS: + case T_INTERFACE: + $iterator->seek($iterator->key() + 2); + $tk = $iterator->current(); + $this->name = $tk[1]; + break; + + case T_IMPLEMENTS: + $extractor($iterator, function ($fqn) use (&$implements) { + $implements[] = $fqn; + }); + break; + + case T_EXTENDS: + $extractor($iterator, function ($fqn) use (&$extends) { + $extends[] = $fqn; + }); + break; + } + + $iterator->next(); + } + + $this->implements = $this->guessFQN($implements); + $this->extends = $this->guessFQN($extends); + } + + public function guessFQN($classes) + { + $useDirectives = $this->getNamespace()->getUseDirectives(); + return array_map(array($useDirectives, 'getFQN'), $classes); + } + + public function getImplementedInterfaces($all = false) + { + if ($all) { + return $this->implements; + } + + return array_filter( + $this->implements, + function ($cn) { return strpos($cn, 'Predis\\') === 0; } + ); + } + + public function getExtendedClasses($all = false) + { + if ($all) { + return $this->extemds; + } + + return array_filter( + $this->extends, + function ($cn) { return strpos($cn, 'Predis\\') === 0; } + ); + } + + public function getDependencies($all = false) + { + return array_merge( + $this->getImplementedInterfaces($all), + $this->getExtendedClasses($all) + ); + } + + public function getNamespace() + { + return $this->namespace; + } + + public function getFile() + { + return $this->file; + } + + public function getName() + { + return $this->name; + } + + public function getFQN() + { + return (string)$this->getNamespace() . '\\' . $this->name; + } + + public function getPhpCode() + { + return $this->body; + } + + public function __toString() + { + return "class " . $this->getName() . '{ ... }'; + } +} + +/* -------------------------------------------------------------------------- */ + +$options = CommandLine::getOptions(); +$predisFile = PredisFile::from($options['source'], $options['exclude']); +$predisFile->saveTo($options['output']); diff --git a/vendor/predis/predis/composer.json b/vendor/predis/predis/composer.json new file mode 100644 index 00000000..2c1c2501 --- /dev/null +++ b/vendor/predis/predis/composer.json @@ -0,0 +1,31 @@ +{ + "name": "predis/predis", + "type": "library", + "description": "Flexible and feature-complete Redis client for PHP and HHVM", + "keywords": ["nosql", "redis", "predis"], + "homepage": "http://github.com/nrk/predis", + "license": "MIT", + "support": { + "issues": "https://github.com/nrk/predis/issues" + }, + "authors": [ + { + "name": "Daniele Alessandri", + "email": "suppakilla@gmail.com", + "homepage": "http://clorophilla.net" + } + ], + "require": { + "php": ">=5.3.9" + }, + "require-dev": { + "phpunit/phpunit": "~4.8" + }, + "suggest": { + "ext-phpiredis": "Allows faster serialization and deserialization of the Redis protocol", + "ext-curl": "Allows access to Webdis when paired with phpiredis" + }, + "autoload": { + "psr-4": {"Predis\\": "src/"} + } +} diff --git a/vendor/predis/predis/examples/custom_cluster_distributor.php b/vendor/predis/predis/examples/custom_cluster_distributor.php new file mode 100644 index 00000000..d02fbecb --- /dev/null +++ b/vendor/predis/predis/examples/custom_cluster_distributor.php @@ -0,0 +1,117 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +require __DIR__.'/shared.php'; + +// Developers can implement Predis\Distribution\DistributorInterface to create +// their own distributors used by the client to distribute keys among a cluster +// of servers. + +use Predis\Cluster\Distributor\DistributorInterface; +use Predis\Cluster\Hash\HashGeneratorInterface; +use Predis\Cluster\PredisStrategy; +use Predis\Connection\Aggregate\PredisCluster; + +class NaiveDistributor implements DistributorInterface, HashGeneratorInterface +{ + private $nodes; + private $nodesCount; + + public function __construct() + { + $this->nodes = array(); + $this->nodesCount = 0; + } + + public function add($node, $weight = null) + { + $this->nodes[] = $node; + ++$this->nodesCount; + } + + public function remove($node) + { + $this->nodes = array_filter($this->nodes, function ($n) use ($node) { + return $n !== $node; + }); + + $this->nodesCount = count($this->nodes); + } + + public function getSlot($hash) + { + return $this->nodesCount > 1 ? abs($hash % $this->nodesCount) : 0; + } + + public function getBySlot($slot) + { + return isset($this->nodes[$slot]) ? $this->nodes[$slot] : null; + } + + public function getByHash($hash) + { + if (!$this->nodesCount) { + throw new RuntimeException('No connections.'); + } + + $slot = $this->getSlot($hash); + $node = $this->getBySlot($slot); + + return $node; + } + + public function get($value) + { + $hash = $this->hash($value); + $node = $this->getByHash($hash); + + return $node; + } + + public function hash($value) + { + return crc32($value); + } + + public function getHashGenerator() + { + return $this; + } +} + +$options = array( + 'cluster' => function () { + $distributor = new NaiveDistributor(); + $strategy = new PredisStrategy($distributor); + $cluster = new PredisCluster($strategy); + + return $cluster; + }, +); + +$client = new Predis\Client($multiple_servers, $options); + +for ($i = 0; $i < 100; ++$i) { + $client->set("key:$i", str_pad($i, 4, '0', 0)); + $client->get("key:$i"); +} + +$server1 = $client->getClientFor('first')->info(); +$server2 = $client->getClientFor('second')->info(); + +if (isset($server1['Keyspace'], $server2['Keyspace'])) { + $server1 = $server1['Keyspace']; + $server2 = $server2['Keyspace']; +} + +printf("Server '%s' has %d keys while server '%s' has %d keys.\n", + 'first', $server1['db15']['keys'], 'second', $server2['db15']['keys'] +); diff --git a/vendor/predis/predis/examples/debuggable_connection.php b/vendor/predis/predis/examples/debuggable_connection.php new file mode 100644 index 00000000..1edfc773 --- /dev/null +++ b/vendor/predis/predis/examples/debuggable_connection.php @@ -0,0 +1,92 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +require __DIR__.'/shared.php'; + +// This is an example of how you can easily extend an existing connection class +// and trace the execution of commands for debugging purposes. This can be quite +// useful as a starting poing to understand how your application interacts with +// Redis. + +use Predis\Command\CommandInterface; +use Predis\Connection\StreamConnection; + +class SimpleDebuggableConnection extends StreamConnection +{ + private $tstart = 0; + private $debugBuffer = array(); + + public function connect() + { + $this->tstart = microtime(true); + + parent::connect(); + } + + private function storeDebug(CommandInterface $command, $direction) + { + $firtsArg = $command->getArgument(0); + $timestamp = round(microtime(true) - $this->tstart, 4); + + $debug = $command->getId(); + $debug .= isset($firtsArg) ? " $firtsArg " : ' '; + $debug .= "$direction $this"; + $debug .= " [{$timestamp}s]"; + + $this->debugBuffer[] = $debug; + } + + public function writeRequest(CommandInterface $command) + { + parent::writeRequest($command); + + $this->storeDebug($command, '->'); + } + + public function readResponse(CommandInterface $command) + { + $response = parent::readResponse($command); + $this->storeDebug($command, '<-'); + + return $response; + } + + public function getDebugBuffer() + { + return $this->debugBuffer; + } +} + +$options = array( + 'connections' => array( + 'tcp' => 'SimpleDebuggableConnection', + ), +); + +$client = new Predis\Client($single_server, $options); +$client->set('foo', 'bar'); +$client->get('foo'); +$client->info(); + +var_export($client->getConnection()->getDebugBuffer()); + +/* OUTPUT: +array ( + 0 => 'SELECT 15 -> 127.0.0.1:6379 [0.0008s]', + 1 => 'SELECT 15 <- 127.0.0.1:6379 [0.001s]', + 2 => 'SET foo -> 127.0.0.1:6379 [0.001s]', + 3 => 'SET foo <- 127.0.0.1:6379 [0.0011s]', + 4 => 'GET foo -> 127.0.0.1:6379 [0.0013s]', + 5 => 'GET foo <- 127.0.0.1:6379 [0.0015s]', + 6 => 'INFO -> 127.0.0.1:6379 [0.0019s]', + 7 => 'INFO <- 127.0.0.1:6379 [0.0022s]', +) +*/ diff --git a/vendor/predis/predis/examples/dispatcher_loop.php b/vendor/predis/predis/examples/dispatcher_loop.php new file mode 100644 index 00000000..6808619d --- /dev/null +++ b/vendor/predis/predis/examples/dispatcher_loop.php @@ -0,0 +1,79 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +require __DIR__.'/shared.php'; + +// This is a basic example on how to use the Predis\DispatcherLoop class. +// +// To see this example in action you can just use redis-cli and publish some +// messages to the 'events' and 'control' channel, e.g.: + +// ./redis-cli +// PUBLISH events first +// PUBLISH events second +// PUBLISH events third +// PUBLISH control terminate_dispatcher + +// Create a client and disable r/w timeout on the socket +$client = new Predis\Client($single_server + array('read_write_timeout' => 0)); + +// Return an initialized PubSub consumer instance from the client. +$pubsub = $client->pubSubLoop(); + +// Create a dispatcher loop instance and attach a bunch of callbacks. +$dispatcher = new Predis\PubSub\DispatcherLoop($pubsub); + +// Demonstrate how to use a callable class as a callback for the dispatcher loop. +class EventsListener implements Countable +{ + private $events; + + public function __construct() + { + $this->events = array(); + } + + public function count() + { + return count($this->events); + } + + public function getEvents() + { + return $this->events; + } + + public function __invoke($payload) + { + $this->events[] = $payload; + } +} + +// Attach our callable class to the dispatcher. +$dispatcher->attachCallback('events', ($events = new EventsListener())); + +// Attach a function to control the dispatcher loop termination with a message. +$dispatcher->attachCallback('control', function ($payload) use ($dispatcher) { + if ($payload === 'terminate_dispatcher') { + $dispatcher->stop(); + } +}); + +// Run the dispatcher loop until the callback attached to the 'control' channel +// receives 'terminate_dispatcher' as a message. +$dispatcher->run(); + +// Display our achievements! +echo "We received {$events->count()} messages!", PHP_EOL; + +// Say goodbye :-) +$version = redis_version($client->info()); +echo "Goodbye from Redis $version!", PHP_EOL; diff --git a/vendor/predis/predis/examples/executing_redis_commands.php b/vendor/predis/predis/examples/executing_redis_commands.php new file mode 100644 index 00000000..b22a7689 --- /dev/null +++ b/vendor/predis/predis/examples/executing_redis_commands.php @@ -0,0 +1,57 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +require __DIR__.'/shared.php'; + +$client = new Predis\Client($single_server); + +// Plain old SET and GET example... +$client->set('library', 'predis'); +$response = $client->get('library'); + +var_export($response); echo PHP_EOL; +/* OUTPUT: 'predis' */ + +// Redis has the MSET and MGET commands to set or get multiple keys in one go, +// cases like this Predis accepts arguments for variadic commands both as a list +// of arguments or an array containing all of the keys and/or values. +$mkv = array( + 'uid:0001' => '1st user', + 'uid:0002' => '2nd user', + 'uid:0003' => '3rd user', +); + +$client->mset($mkv); +$response = $client->mget(array_keys($mkv)); + +var_export($response); echo PHP_EOL; +/* OUTPUT: +array ( + 0 => '1st user', + 1 => '2nd user', + 2 => '3rd user', +) */ + +// Predis can also send "raw" commands to Redis. The difference between sending +// commands to Redis the usual way and the "raw" way is that in the latter case +// their arguments are not filtered nor responses coming from Redis are parsed. + +$response = $client->executeRaw(array( + 'MGET', 'uid:0001', 'uid:0002', 'uid:0003', +)); + +var_export($response); echo PHP_EOL; +/* OUTPUT: +array ( + 0 => '1st user', + 1 => '2nd user', + 2 => '3rd user', +) */ diff --git a/vendor/predis/predis/examples/key_prefixing.php b/vendor/predis/predis/examples/key_prefixing.php new file mode 100644 index 00000000..ab1c8026 --- /dev/null +++ b/vendor/predis/predis/examples/key_prefixing.php @@ -0,0 +1,36 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +require __DIR__.'/shared.php'; + +// Predis can prefix keys found in commands arguments before sending commands to +// Redis, even for complex commands such as SORT, ZUNIONSTORE and ZINTERSTORE. +// Prefixing keys can be useful to create user-level namespaces for you keyspace +// thus reducing the need for separate logical databases in certain scenarios. + +$client = new Predis\Client($single_server, array('prefix' => 'nrk:')); + +$client->mset(array('foo' => 'bar', 'lol' => 'wut')); +var_export($client->mget('foo', 'lol')); +/* +array ( + 0 => 'bar', + 1 => 'wut', +) +*/ + +var_export($client->keys('*')); +/* +array ( + 0 => 'nrk:foo', + 1 => 'nrk:lol', +) +*/ diff --git a/vendor/predis/predis/examples/lua_scripting_abstraction.php b/vendor/predis/predis/examples/lua_scripting_abstraction.php new file mode 100644 index 00000000..af12f993 --- /dev/null +++ b/vendor/predis/predis/examples/lua_scripting_abstraction.php @@ -0,0 +1,71 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +require __DIR__.'/shared.php'; + +// This example will not work with versions of Redis < 2.6. +// +// Additionally to the EVAL command defined in the current development profile, +// the Predis\Command\ScriptCommand class can be used to build an higher level +// abstraction for "scriptable" commands so that they will appear just like any +// other command on the client-side. This is a quick example used to implement +// INCREX. + +use Predis\Command\ScriptCommand; + +class IncrementExistingKeysBy extends ScriptCommand +{ + public function getKeysCount() + { + // Tell Predis to use all the arguments but the last one as arguments + // for KEYS. The last one will be used to populate ARGV. + return -1; + } + + public function getScript() + { + return << function ($options) { + $profile = $options->getDefault('profile'); + $profile->defineCommand('increxby', 'IncrementExistingKeysBy'); + + return $profile; + }, +)); + +$client->mset('foo', 10, 'foobar', 100); + +var_export($client->increxby('foo', 'foofoo', 'foobar', 50)); + +/* +array ( + 0 => 60, + 1 => NULL, + 2 => 150, +) +*/ diff --git a/vendor/predis/predis/examples/monitor_consumer.php b/vendor/predis/predis/examples/monitor_consumer.php new file mode 100644 index 00000000..04810d2b --- /dev/null +++ b/vendor/predis/predis/examples/monitor_consumer.php @@ -0,0 +1,44 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +require __DIR__.'/shared.php'; + +// This is a basic example on how to use the Predis\Monitor\Consumer class. You +// can use redis-cli to send commands to the same Redis instance your client is +// connected to, and then type "ECHO QUIT_MONITOR" in redis-cli when you want to +// exit the monitor loop and terminate this script in a graceful way. + +// Create a client and disable r/w timeout on the socket. +$client = new Predis\Client($single_server + array('read_write_timeout' => 0)); + +// Use only one instance of DateTime, we will update the timestamp later. +$timestamp = new DateTime(); + +foreach (($monitor = $client->monitor()) as $event) { + $timestamp->setTimestamp((int) $event->timestamp); + + // If we notice a ECHO command with the message QUIT_MONITOR, we stop the + // monitor consumer and then break the loop. + if ($event->command === 'ECHO' && $event->arguments === '"QUIT_MONITOR"') { + echo 'Exiting the monitor loop...', PHP_EOL; + $monitor->stop(); + break; + } + + echo "* Received {$event->command} on DB {$event->database} at {$timestamp->format(DateTime::W3C)}", PHP_EOL; + if (isset($event->arguments)) { + echo " Arguments: {$event->arguments}", PHP_EOL; + } +} + +// Say goodbye :-) +$version = redis_version($client->info()); +echo "Goodbye from Redis $version!", PHP_EOL; diff --git a/vendor/predis/predis/examples/pipelining_commands.php b/vendor/predis/predis/examples/pipelining_commands.php new file mode 100644 index 00000000..9394594f --- /dev/null +++ b/vendor/predis/predis/examples/pipelining_commands.php @@ -0,0 +1,45 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +require __DIR__.'/shared.php'; + +// When you have a whole set of consecutive commands to send to a redis server, +// you can use a pipeline to dramatically improve performances. Pipelines can +// greatly reduce the effects of network round-trips. + +$client = new Predis\Client($single_server); + +$responses = $client->pipeline(function ($pipe) { + $pipe->flushdb(); + $pipe->incrby('counter', 10); + $pipe->incrby('counter', 30); + $pipe->exists('counter'); + $pipe->get('counter'); + $pipe->mget('does_not_exist', 'counter'); +}); + +var_export($responses); + +/* OUTPUT: +array ( + 0 => Predis\Response\Status::__set_state(array( + 'payload' => 'OK', + )), + 1 => 10, + 2 => 40, + 3 => true, + 4 => '40', + 5 => array ( + 0 => NULL, + 1 => '40', + ), +) +*/ diff --git a/vendor/predis/predis/examples/pubsub_consumer.php b/vendor/predis/predis/examples/pubsub_consumer.php new file mode 100644 index 00000000..114bf519 --- /dev/null +++ b/vendor/predis/predis/examples/pubsub_consumer.php @@ -0,0 +1,59 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +require __DIR__.'/shared.php'; + +// Starting from Redis 2.0 clients can subscribe and listen for events published +// on certain channels using a Publish/Subscribe (PUB/SUB) approach. + +// Create a client and disable r/w timeout on the socket +$client = new Predis\Client($single_server + array('read_write_timeout' => 0)); + +// Initialize a new pubsub consumer. +$pubsub = $client->pubSubLoop(); + +// Subscribe to your channels +$pubsub->subscribe('control_channel', 'notifications'); + +// Start processing the pubsup messages. Open a terminal and use redis-cli +// to push messages to the channels. Examples: +// ./redis-cli PUBLISH notifications "this is a test" +// ./redis-cli PUBLISH control_channel quit_loop +foreach ($pubsub as $message) { + switch ($message->kind) { + case 'subscribe': + echo "Subscribed to {$message->channel}", PHP_EOL; + break; + + case 'message': + if ($message->channel == 'control_channel') { + if ($message->payload == 'quit_loop') { + echo 'Aborting pubsub loop...', PHP_EOL; + $pubsub->unsubscribe(); + } else { + echo "Received an unrecognized command: {$message->payload}.", PHP_EOL; + } + } else { + echo "Received the following message from {$message->channel}:", + PHP_EOL, " {$message->payload}", PHP_EOL, PHP_EOL; + } + break; + } +} + +// Always unset the pubsub consumer instance when you are done! The +// class destructor will take care of cleanups and prevent protocol +// desynchronizations between the client and the server. +unset($pubsub); + +// Say goodbye :-) +$version = redis_version($client->info()); +echo "Goodbye from Redis $version!", PHP_EOL; diff --git a/vendor/predis/predis/examples/redis_collections_iterators.php b/vendor/predis/predis/examples/redis_collections_iterators.php new file mode 100644 index 00000000..b469d974 --- /dev/null +++ b/vendor/predis/predis/examples/redis_collections_iterators.php @@ -0,0 +1,99 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +require __DIR__.'/shared.php'; + +use Predis\Collection\Iterator; + +// Starting from Redis 2.8, clients can iterate incrementally over collections +// without blocking the server like it happens when a command such as KEYS is +// executed on a Redis instance storing millions of keys. These commands are: +// +// - SCAN (iterates over the keyspace) +// - SSCAN (iterates over members of a set) +// - ZSCAN (iterates over members and ranks of a sorted set) +// - HSCAN (iterates over fields and values of an hash). + +// Predis provides a specialized abstraction for each command based on standard +// SPL iterators making it possible to easily consume SCAN-based iterations in +// your PHP code. +// +// See http://redis.io/commands/scan for more details. +// + +// Create a client using `2.8` as a server profile (needs Redis 2.8!) +$client = new Predis\Client($single_server, array('profile' => '2.8')); + +// Prepare some keys for our example +$client->del('predis:set', 'predis:zset', 'predis:hash'); +for ($i = 0; $i < 5; ++$i) { + $client->sadd('predis:set', "member:$i"); + $client->zadd('predis:zset', -$i, "member:$i"); + $client->hset('predis:hash', "field:$i", "value:$i"); +} + +// === Keyspace iterator based on SCAN === +echo 'Scan the keyspace matching only our prefixed keys:', PHP_EOL; +foreach (new Iterator\Keyspace($client, 'predis:*') as $key) { + echo " - $key", PHP_EOL; +} + +/* OUTPUT +Scan the keyspace matching only our prefixed keys: + - predis:zset + - predis:set + - predis:hash +*/ + +// === Set iterator based on SSCAN === +echo 'Scan members of `predis:set`:', PHP_EOL; +foreach (new Iterator\SetKey($client, 'predis:set') as $member) { + echo " - $member", PHP_EOL; +} + +/* OUTPUT +Scan members of `predis:set`: + - member:1 + - member:4 + - member:0 + - member:3 + - member:2 +*/ + +// === Sorted set iterator based on ZSCAN === +echo 'Scan members and ranks of `predis:zset`:', PHP_EOL; +foreach (new Iterator\SortedSetKey($client, 'predis:zset') as $member => $rank) { + echo " - $member [rank: $rank]", PHP_EOL; +} + +/* OUTPUT +Scan members and ranks of `predis:zset`: + - member:4 [rank: -4] + - member:3 [rank: -3] + - member:2 [rank: -2] + - member:1 [rank: -1] + - member:0 [rank: 0] +*/ + +// === Hash iterator based on HSCAN === +echo 'Scan fields and values of `predis:hash`:', PHP_EOL; +foreach (new Iterator\HashKey($client, 'predis:hash') as $field => $value) { + echo " - $field => $value", PHP_EOL; +} + +/* OUTPUT +Scan fields and values of `predis:hash`: + - field:0 => value:0 + - field:1 => value:1 + - field:2 => value:2 + - field:3 => value:3 + - field:4 => value:4 +*/ diff --git a/vendor/predis/predis/examples/replication_complex.php b/vendor/predis/predis/examples/replication_complex.php new file mode 100644 index 00000000..b17e1886 --- /dev/null +++ b/vendor/predis/predis/examples/replication_complex.php @@ -0,0 +1,85 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +require __DIR__.'/shared.php'; + +// Predis allows to set Lua scripts as read-only operations for replication. +// This works for both EVAL and EVALSHA and also for the client-side abstraction +// built upon them (Predis\Command\ScriptCommand). This example shows a slightly +// more complex configuration that injects a new script command in the server +// profile used by the new client instance and marks it marks it as a read-only +// operation for replication so that it will be executed on slaves. + +use Predis\Command\ScriptCommand; +use Predis\Connection\Aggregate\MasterSlaveReplication; +use Predis\Replication\ReplicationStrategy; + +// ------------------------------------------------------------------------- // + +// Define a new script command that returns all the fields of a variable number +// of hashes with a single roundtrip. + +class HashMultipleGetAll extends ScriptCommand +{ + const BODY = << function ($options, $option) { + $profile = $options->getDefault($option); + $profile->defineCommand('hmgetall', 'HashMultipleGetAll'); + + return $profile; + }, + 'replication' => function () { + $strategy = new ReplicationStrategy(); + $strategy->setScriptReadOnly(HashMultipleGetAll::BODY); + + $replication = new MasterSlaveReplication($strategy); + + return $replication; + }, +); + +// ------------------------------------------------------------------------- // + +$client = new Predis\Client($parameters, $options); + +// Execute the following commands on the master server using redis-cli: +// $ ./redis-cli HMSET metavars foo bar hoge piyo +// $ ./redis-cli HMSET servers master host1 slave host2 + +$hashes = $client->hmgetall('metavars', 'servers'); + +$replication = $client->getConnection(); +$stillOnSlave = $replication->getCurrent() === $replication->getConnectionById('slave'); + +echo 'Is still on slave? ', $stillOnSlave ? 'YES!' : 'NO!', PHP_EOL; +var_export($hashes); diff --git a/vendor/predis/predis/examples/replication_sentinel.php b/vendor/predis/predis/examples/replication_sentinel.php new file mode 100644 index 00000000..4cf24fe1 --- /dev/null +++ b/vendor/predis/predis/examples/replication_sentinel.php @@ -0,0 +1,58 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +require __DIR__.'/shared.php'; + +// Predis supports redis-sentinel to provide high availability in master / slave +// scenarios. The only but relevant difference with a basic replication scenario +// is that sentinel servers can manage the master server and its slaves based on +// their state, which means that they are able to provide an authoritative and +// updated configuration to clients thus avoiding static configurations for the +// replication servers and their roles. + +// Instead of connection parameters pointing to redis nodes, we provide a list +// of instances of redis-sentinel. Users should always provide a timeout value +// low enough to not hinder operations just in case a sentinel is unreachable +// but Predis uses a default value of 100 milliseconds for sentinel parameters +// without an explicit timeout value. +// +// NOTE: in real-world scenarios sentinels should be running on different hosts! +$sentinels = array( + 'tcp://127.0.0.1:5380?timeout=0.100', + 'tcp://127.0.0.1:5381?timeout=0.100', + 'tcp://127.0.0.1:5382?timeout=0.100', +); + +$client = new Predis\Client($sentinels, array( + 'replication' => 'sentinel', + 'service' => 'mymaster', +)); + +// Read operation. +$exists = $client->exists('foo') ? 'yes' : 'no'; +$current = $client->getConnection()->getCurrent()->getParameters(); +echo "Does 'foo' exist on {$current->alias}? $exists.", PHP_EOL; + +// Write operation. +$client->set('foo', 'bar'); +$current = $client->getConnection()->getCurrent()->getParameters(); +echo "Now 'foo' has been set to 'bar' on {$current->alias}!", PHP_EOL; + +// Read operation. +$bar = $client->get('foo'); +$current = $client->getConnection()->getCurrent()->getParameters(); +echo "We fetched 'foo' from {$current->alias} and its value is '$bar'.", PHP_EOL; + +/* OUTPUT: +Does 'foo' exist on slave-127.0.0.1:6381? yes. +Now 'foo' has been set to 'bar' on master! +We fetched 'foo' from master and its value is 'bar'. +*/ diff --git a/vendor/predis/predis/examples/replication_simple.php b/vendor/predis/predis/examples/replication_simple.php new file mode 100644 index 00000000..ee7f30ee --- /dev/null +++ b/vendor/predis/predis/examples/replication_simple.php @@ -0,0 +1,52 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +require __DIR__.'/shared.php'; + +// Predis supports master / slave replication scenarios where write operations +// are performed on the master server and read operations are executed against +// one of the slaves. The behavior of commands or EVAL scripts can be customized +// at will. As soon as a write operation is performed the client switches to the +// master server for all the subsequent requests (either reads and writes). +// +// This example must be executed using the second Redis server configured as the +// slave of the first one (see the "SLAVEOF" command). +// + +$parameters = array( + 'tcp://127.0.0.1:6379?database=15&alias=master', + 'tcp://127.0.0.1:6380?database=15&alias=slave', +); + +$options = array('replication' => true); + +$client = new Predis\Client($parameters, $options); + +// Read operation. +$exists = $client->exists('foo') ? 'yes' : 'no'; +$current = $client->getConnection()->getCurrent()->getParameters(); +echo "Does 'foo' exist on {$current->alias}? $exists.", PHP_EOL; + +// Write operation. +$client->set('foo', 'bar'); +$current = $client->getConnection()->getCurrent()->getParameters(); +echo "Now 'foo' has been set to 'bar' on {$current->alias}!", PHP_EOL; + +// Read operation. +$bar = $client->get('foo'); +$current = $client->getConnection()->getCurrent()->getParameters(); +echo "We fetched 'foo' from {$current->alias} and its value is '$bar'.", PHP_EOL; + +/* OUTPUT: +Does 'foo' exist on slave? yes. +Now 'foo' has been set to 'bar' on master! +We fetched 'foo' from master and its value is 'bar'. +*/ diff --git a/vendor/predis/predis/examples/session_handler.php b/vendor/predis/predis/examples/session_handler.php new file mode 100644 index 00000000..ac206337 --- /dev/null +++ b/vendor/predis/predis/examples/session_handler.php @@ -0,0 +1,52 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +require __DIR__.'/shared.php'; + +// This example demonstrates how to use Predis to save PHP sessions on Redis. +// +// The value of `session.gc_maxlifetime` in `php.ini` will be used by default as +// the TTL for keys holding session data but this value can be overridden when +// creating the session handler instance using the `gc_maxlifetime` option. +// +// NOTE: this class requires PHP >= 5.4 but can be used on PHP 5.3 if a polyfill +// for SessionHandlerInterface is provided either by you or an external package +// like `symfony/http-foundation`. +// +// See http://www.php.net/class.sessionhandlerinterface.php for more details. +// + +if (!interface_exists('SessionHandlerInterface')) { + die('ATTENTION: the session handler implemented by Predis requires PHP >= 5.4.0 '. + "or a polyfill for SessionHandlerInterface provided by an external package.\n"); +} + +// Instantiate a new client just like you would normally do. Using a prefix for +// keys will effectively prefix all session keys with the specified string. +$client = new Predis\Client($single_server, array('prefix' => 'sessions:')); + +// Set `gc_maxlifetime` to specify a time-to-live of 5 seconds for session keys. +$handler = new Predis\Session\Handler($client, array('gc_maxlifetime' => 5)); + +// Register the session handler. +$handler->register(); + +// We just set a fixed session ID only for the sake of our example. +session_id('example_session_id'); + +session_start(); + +if (isset($_SESSION['foo'])) { + echo "Session has `foo` set to {$_SESSION['foo']}", PHP_EOL; +} else { + $_SESSION['foo'] = $value = mt_rand(); + echo "Empty session, `foo` has been set with $value", PHP_EOL; +} diff --git a/vendor/predis/predis/examples/shared.php b/vendor/predis/predis/examples/shared.php new file mode 100644 index 00000000..98363db0 --- /dev/null +++ b/vendor/predis/predis/examples/shared.php @@ -0,0 +1,44 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +require __DIR__.'/../autoload.php'; + +function redis_version($info) +{ + if (isset($info['Server']['redis_version'])) { + return $info['Server']['redis_version']; + } elseif (isset($info['redis_version'])) { + return $info['redis_version']; + } else { + return 'unknown version'; + } +} + +$single_server = array( + 'host' => '127.0.0.1', + 'port' => 6379, + 'database' => 15, +); + +$multiple_servers = array( + array( + 'host' => '127.0.0.1', + 'port' => 6379, + 'database' => 15, + 'alias' => 'first', + ), + array( + 'host' => '127.0.0.1', + 'port' => 6380, + 'database' => 15, + 'alias' => 'second', + ), +); diff --git a/vendor/predis/predis/examples/transaction_using_cas.php b/vendor/predis/predis/examples/transaction_using_cas.php new file mode 100644 index 00000000..16d3766b --- /dev/null +++ b/vendor/predis/predis/examples/transaction_using_cas.php @@ -0,0 +1,52 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +require __DIR__.'/shared.php'; + +// This is an implementation of an atomic client-side ZPOP using the support for +// check-and-set (CAS) operations with MULTI/EXEC transactions, as described in +// "WATCH explained" from http://redis.io/topics/transactions +// +// First, populate your database with a tiny sample data set: +// +// ./redis-cli +// SELECT 15 +// ZADD zset 1 a 2 b 3 c +// +// Then execute this script four times and see its output. +// + +function zpop($client, $key) +{ + $element = null; + $options = array( + 'cas' => true, // Initialize with support for CAS operations + 'watch' => $key, // Key that needs to be WATCHed to detect changes + 'retry' => 3, // Number of retries on aborted transactions, after + // which the client bails out with an exception. + ); + + $client->transaction($options, function ($tx) use ($key, &$element) { + @list($element) = $tx->zrange($key, 0, 0); + + if (isset($element)) { + $tx->multi(); // With CAS, MULTI *must* be explicitly invoked. + $tx->zrem($key, $element); + } + }); + + return $element; +} + +$client = new Predis\Client($single_server); +$zpopped = zpop($client, 'zset'); + +echo isset($zpopped) ? "ZPOPed $zpopped" : 'Nothing to ZPOP!', PHP_EOL; diff --git a/vendor/predis/predis/package.ini b/vendor/predis/predis/package.ini new file mode 100644 index 00000000..64536d93 --- /dev/null +++ b/vendor/predis/predis/package.ini @@ -0,0 +1,36 @@ +; This file is meant to be used with Onion http://c9s.github.com/Onion/ +; For instructions on how to build a PEAR package of Predis please follow +; the instructions at this URL: +; +; https://github.com/c9s/Onion#a-quick-tutorial-for-building-pear-package +; + +[package] +name = "Predis" +desc = "Flexible and feature-complete Redis client for PHP and HHVM" +homepage = "http://github.com/nrk/predis" +license = "MIT" +version = "1.1.1" +stability = "stable" +channel = "pear.nrk.io" + +author = "Daniele Alessandri \"nrk\" " + +[require] +php = ">= 5.3.9" +pearinstaller = "1.4.1" + +[roles] +*.xml.dist = test +*.md = doc +LICENSE = doc + +[optional phpiredis] +hint = "Add support for faster protocol handling with phpiredis" +extensions[] = socket +extensions[] = phpiredis + +[optional webdis] +hint = "Add support for Webdis" +extensions[] = curl +extensions[] = phpiredis diff --git a/vendor/predis/predis/src/Autoloader.php b/vendor/predis/predis/src/Autoloader.php new file mode 100644 index 00000000..36bce556 --- /dev/null +++ b/vendor/predis/predis/src/Autoloader.php @@ -0,0 +1,62 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis; + +/** + * Implements a lightweight PSR-0 compliant autoloader for Predis. + * + * @author Eric Naeseth + * @author Daniele Alessandri + */ +class Autoloader +{ + private $directory; + private $prefix; + private $prefixLength; + + /** + * @param string $baseDirectory Base directory where the source files are located. + */ + public function __construct($baseDirectory = __DIR__) + { + $this->directory = $baseDirectory; + $this->prefix = __NAMESPACE__.'\\'; + $this->prefixLength = strlen($this->prefix); + } + + /** + * Registers the autoloader class with the PHP SPL autoloader. + * + * @param bool $prepend Prepend the autoloader on the stack instead of appending it. + */ + public static function register($prepend = false) + { + spl_autoload_register(array(new self(), 'autoload'), true, $prepend); + } + + /** + * Loads a class from a file using its fully qualified name. + * + * @param string $className Fully qualified name of a class. + */ + public function autoload($className) + { + if (0 === strpos($className, $this->prefix)) { + $parts = explode('\\', substr($className, $this->prefixLength)); + $filepath = $this->directory.DIRECTORY_SEPARATOR.implode(DIRECTORY_SEPARATOR, $parts).'.php'; + + if (is_file($filepath)) { + require $filepath; + } + } + } +} diff --git a/vendor/predis/predis/src/Client.php b/vendor/predis/predis/src/Client.php new file mode 100644 index 00000000..2b68fddb --- /dev/null +++ b/vendor/predis/predis/src/Client.php @@ -0,0 +1,547 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis; + +use Predis\Command\CommandInterface; +use Predis\Command\RawCommand; +use Predis\Command\ScriptCommand; +use Predis\Configuration\Options; +use Predis\Configuration\OptionsInterface; +use Predis\Connection\AggregateConnectionInterface; +use Predis\Connection\ConnectionInterface; +use Predis\Connection\ParametersInterface; +use Predis\Monitor\Consumer as MonitorConsumer; +use Predis\Pipeline\Pipeline; +use Predis\PubSub\Consumer as PubSubConsumer; +use Predis\Response\ErrorInterface as ErrorResponseInterface; +use Predis\Response\ResponseInterface; +use Predis\Response\ServerException; +use Predis\Transaction\MultiExec as MultiExecTransaction; + +/** + * Client class used for connecting and executing commands on Redis. + * + * This is the main high-level abstraction of Predis upon which various other + * abstractions are built. Internally it aggregates various other classes each + * one with its own responsibility and scope. + * + * {@inheritdoc} + * + * @author Daniele Alessandri + */ +class Client implements ClientInterface, \IteratorAggregate +{ + const VERSION = '1.1.1'; + + protected $connection; + protected $options; + private $profile; + + /** + * @param mixed $parameters Connection parameters for one or more servers. + * @param mixed $options Options to configure some behaviours of the client. + */ + public function __construct($parameters = null, $options = null) + { + $this->options = $this->createOptions($options ?: array()); + $this->connection = $this->createConnection($parameters ?: array()); + $this->profile = $this->options->profile; + } + + /** + * Creates a new instance of Predis\Configuration\Options from different + * types of arguments or simply returns the passed argument if it is an + * instance of Predis\Configuration\OptionsInterface. + * + * @param mixed $options Client options. + * + * @throws \InvalidArgumentException + * + * @return OptionsInterface + */ + protected function createOptions($options) + { + if (is_array($options)) { + return new Options($options); + } + + if ($options instanceof OptionsInterface) { + return $options; + } + + throw new \InvalidArgumentException('Invalid type for client options.'); + } + + /** + * Creates single or aggregate connections from different types of arguments + * (string, array) or returns the passed argument if it is an instance of a + * class implementing Predis\Connection\ConnectionInterface. + * + * Accepted types for connection parameters are: + * + * - Instance of Predis\Connection\ConnectionInterface. + * - Instance of Predis\Connection\ParametersInterface. + * - Array + * - String + * - Callable + * + * @param mixed $parameters Connection parameters or connection instance. + * + * @throws \InvalidArgumentException + * + * @return ConnectionInterface + */ + protected function createConnection($parameters) + { + if ($parameters instanceof ConnectionInterface) { + return $parameters; + } + + if ($parameters instanceof ParametersInterface || is_string($parameters)) { + return $this->options->connections->create($parameters); + } + + if (is_array($parameters)) { + if (!isset($parameters[0])) { + return $this->options->connections->create($parameters); + } + + $options = $this->options; + + if ($options->defined('aggregate')) { + $initializer = $this->getConnectionInitializerWrapper($options->aggregate); + $connection = $initializer($parameters, $options); + } elseif ($options->defined('replication')) { + $replication = $options->replication; + + if ($replication instanceof AggregateConnectionInterface) { + $connection = $replication; + $options->connections->aggregate($connection, $parameters); + } else { + $initializer = $this->getConnectionInitializerWrapper($replication); + $connection = $initializer($parameters, $options); + } + } else { + $connection = $options->cluster; + $options->connections->aggregate($connection, $parameters); + } + + return $connection; + } + + if (is_callable($parameters)) { + $initializer = $this->getConnectionInitializerWrapper($parameters); + $connection = $initializer($this->options); + + return $connection; + } + + throw new \InvalidArgumentException('Invalid type for connection parameters.'); + } + + /** + * Wraps a callable to make sure that its returned value represents a valid + * connection type. + * + * @param mixed $callable + * + * @return \Closure + */ + protected function getConnectionInitializerWrapper($callable) + { + return function () use ($callable) { + $connection = call_user_func_array($callable, func_get_args()); + + if (!$connection instanceof ConnectionInterface) { + throw new \UnexpectedValueException( + 'The callable connection initializer returned an invalid type.' + ); + } + + return $connection; + }; + } + + /** + * {@inheritdoc} + */ + public function getProfile() + { + return $this->profile; + } + + /** + * {@inheritdoc} + */ + public function getOptions() + { + return $this->options; + } + + /** + * Creates a new client instance for the specified connection ID or alias, + * only when working with an aggregate connection (cluster, replication). + * The new client instances uses the same options of the original one. + * + * @param string $connectionID Identifier of a connection. + * + * @throws \InvalidArgumentException + * + * @return Client + */ + public function getClientFor($connectionID) + { + if (!$connection = $this->getConnectionById($connectionID)) { + throw new \InvalidArgumentException("Invalid connection ID: $connectionID."); + } + + return new static($connection, $this->options); + } + + /** + * Opens the underlying connection and connects to the server. + */ + public function connect() + { + $this->connection->connect(); + } + + /** + * Closes the underlying connection and disconnects from the server. + */ + public function disconnect() + { + $this->connection->disconnect(); + } + + /** + * Closes the underlying connection and disconnects from the server. + * + * This is the same as `Client::disconnect()` as it does not actually send + * the `QUIT` command to Redis, but simply closes the connection. + */ + public function quit() + { + $this->disconnect(); + } + + /** + * Returns the current state of the underlying connection. + * + * @return bool + */ + public function isConnected() + { + return $this->connection->isConnected(); + } + + /** + * {@inheritdoc} + */ + public function getConnection() + { + return $this->connection; + } + + /** + * Retrieves the specified connection from the aggregate connection when the + * client is in cluster or replication mode. + * + * @param string $connectionID Index or alias of the single connection. + * + * @throws NotSupportedException + * + * @return Connection\NodeConnectionInterface + */ + public function getConnectionById($connectionID) + { + if (!$this->connection instanceof AggregateConnectionInterface) { + throw new NotSupportedException( + 'Retrieving connections by ID is supported only by aggregate connections.' + ); + } + + return $this->connection->getConnectionById($connectionID); + } + + /** + * Executes a command without filtering its arguments, parsing the response, + * applying any prefix to keys or throwing exceptions on Redis errors even + * regardless of client options. + * + * It is possible to identify Redis error responses from normal responses + * using the second optional argument which is populated by reference. + * + * @param array $arguments Command arguments as defined by the command signature. + * @param bool $error Set to TRUE when Redis returned an error response. + * + * @return mixed + */ + public function executeRaw(array $arguments, &$error = null) + { + $error = false; + + $response = $this->connection->executeCommand( + new RawCommand($arguments) + ); + + if ($response instanceof ResponseInterface) { + if ($response instanceof ErrorResponseInterface) { + $error = true; + } + + return (string) $response; + } + + return $response; + } + + /** + * {@inheritdoc} + */ + public function __call($commandID, $arguments) + { + return $this->executeCommand( + $this->createCommand($commandID, $arguments) + ); + } + + /** + * {@inheritdoc} + */ + public function createCommand($commandID, $arguments = array()) + { + return $this->profile->createCommand($commandID, $arguments); + } + + /** + * {@inheritdoc} + */ + public function executeCommand(CommandInterface $command) + { + $response = $this->connection->executeCommand($command); + + if ($response instanceof ResponseInterface) { + if ($response instanceof ErrorResponseInterface) { + $response = $this->onErrorResponse($command, $response); + } + + return $response; + } + + return $command->parseResponse($response); + } + + /** + * Handles -ERR responses returned by Redis. + * + * @param CommandInterface $command Redis command that generated the error. + * @param ErrorResponseInterface $response Instance of the error response. + * + * @throws ServerException + * + * @return mixed + */ + protected function onErrorResponse(CommandInterface $command, ErrorResponseInterface $response) + { + if ($command instanceof ScriptCommand && $response->getErrorType() === 'NOSCRIPT') { + $eval = $this->createCommand('EVAL'); + $eval->setRawArguments($command->getEvalArguments()); + + $response = $this->executeCommand($eval); + + if (!$response instanceof ResponseInterface) { + $response = $command->parseResponse($response); + } + + return $response; + } + + if ($this->options->exceptions) { + throw new ServerException($response->getMessage()); + } + + return $response; + } + + /** + * Executes the specified initializer method on `$this` by adjusting the + * actual invokation depending on the arity (0, 1 or 2 arguments). This is + * simply an utility method to create Redis contexts instances since they + * follow a common initialization path. + * + * @param string $initializer Method name. + * @param array $argv Arguments for the method. + * + * @return mixed + */ + private function sharedContextFactory($initializer, $argv = null) + { + switch (count($argv)) { + case 0: + return $this->$initializer(); + + case 1: + return is_array($argv[0]) + ? $this->$initializer($argv[0]) + : $this->$initializer(null, $argv[0]); + + case 2: + list($arg0, $arg1) = $argv; + + return $this->$initializer($arg0, $arg1); + + default: + return $this->$initializer($this, $argv); + } + } + + /** + * Creates a new pipeline context and returns it, or returns the results of + * a pipeline executed inside the optionally provided callable object. + * + * @param mixed ... Array of options, a callable for execution, or both. + * + * @return Pipeline|array + */ + public function pipeline(/* arguments */) + { + return $this->sharedContextFactory('createPipeline', func_get_args()); + } + + /** + * Actual pipeline context initializer method. + * + * @param array $options Options for the context. + * @param mixed $callable Optional callable used to execute the context. + * + * @return Pipeline|array + */ + protected function createPipeline(array $options = null, $callable = null) + { + if (isset($options['atomic']) && $options['atomic']) { + $class = 'Predis\Pipeline\Atomic'; + } elseif (isset($options['fire-and-forget']) && $options['fire-and-forget']) { + $class = 'Predis\Pipeline\FireAndForget'; + } else { + $class = 'Predis\Pipeline\Pipeline'; + } + + /* + * @var ClientContextInterface + */ + $pipeline = new $class($this); + + if (isset($callable)) { + return $pipeline->execute($callable); + } + + return $pipeline; + } + + /** + * Creates a new transaction context and returns it, or returns the results + * of a transaction executed inside the optionally provided callable object. + * + * @param mixed ... Array of options, a callable for execution, or both. + * + * @return MultiExecTransaction|array + */ + public function transaction(/* arguments */) + { + return $this->sharedContextFactory('createTransaction', func_get_args()); + } + + /** + * Actual transaction context initializer method. + * + * @param array $options Options for the context. + * @param mixed $callable Optional callable used to execute the context. + * + * @return MultiExecTransaction|array + */ + protected function createTransaction(array $options = null, $callable = null) + { + $transaction = new MultiExecTransaction($this, $options); + + if (isset($callable)) { + return $transaction->execute($callable); + } + + return $transaction; + } + + /** + * Creates a new publish/subscribe context and returns it, or starts its loop + * inside the optionally provided callable object. + * + * @param mixed ... Array of options, a callable for execution, or both. + * + * @return PubSubConsumer|null + */ + public function pubSubLoop(/* arguments */) + { + return $this->sharedContextFactory('createPubSub', func_get_args()); + } + + /** + * Actual publish/subscribe context initializer method. + * + * @param array $options Options for the context. + * @param mixed $callable Optional callable used to execute the context. + * + * @return PubSubConsumer|null + */ + protected function createPubSub(array $options = null, $callable = null) + { + $pubsub = new PubSubConsumer($this, $options); + + if (!isset($callable)) { + return $pubsub; + } + + foreach ($pubsub as $message) { + if (call_user_func($callable, $pubsub, $message) === false) { + $pubsub->stop(); + } + } + } + + /** + * Creates a new monitor consumer and returns it. + * + * @return MonitorConsumer + */ + public function monitor() + { + return new MonitorConsumer($this); + } + + /** + * {@inheritdoc} + */ + public function getIterator() + { + $clients = array(); + $connection = $this->getConnection(); + + if (!$connection instanceof \Traversable) { + throw new ClientException('The underlying connection is not traversable'); + } + + foreach ($connection as $node) { + $clients[(string) $node] = new static($node, $this->getOptions()); + } + + return new \ArrayIterator($clients); + } +} diff --git a/vendor/predis/predis/src/ClientContextInterface.php b/vendor/predis/predis/src/ClientContextInterface.php new file mode 100644 index 00000000..ebadf89a --- /dev/null +++ b/vendor/predis/predis/src/ClientContextInterface.php @@ -0,0 +1,198 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis; + +use Predis\Command\CommandInterface; + +/** + * Interface defining a client-side context such as a pipeline or transaction. + * + * @method $this del(array $keys) + * @method $this dump($key) + * @method $this exists($key) + * @method $this expire($key, $seconds) + * @method $this expireat($key, $timestamp) + * @method $this keys($pattern) + * @method $this move($key, $db) + * @method $this object($subcommand, $key) + * @method $this persist($key) + * @method $this pexpire($key, $milliseconds) + * @method $this pexpireat($key, $timestamp) + * @method $this pttl($key) + * @method $this randomkey() + * @method $this rename($key, $target) + * @method $this renamenx($key, $target) + * @method $this scan($cursor, array $options = null) + * @method $this sort($key, array $options = null) + * @method $this ttl($key) + * @method $this type($key) + * @method $this append($key, $value) + * @method $this bitcount($key, $start = null, $end = null) + * @method $this bitop($operation, $destkey, $key) + * @method $this bitfield($key, $subcommand, ...$subcommandArg) + * @method $this decr($key) + * @method $this decrby($key, $decrement) + * @method $this get($key) + * @method $this getbit($key, $offset) + * @method $this getrange($key, $start, $end) + * @method $this getset($key, $value) + * @method $this incr($key) + * @method $this incrby($key, $increment) + * @method $this incrbyfloat($key, $increment) + * @method $this mget(array $keys) + * @method $this mset(array $dictionary) + * @method $this msetnx(array $dictionary) + * @method $this psetex($key, $milliseconds, $value) + * @method $this set($key, $value, $expireResolution = null, $expireTTL = null, $flag = null) + * @method $this setbit($key, $offset, $value) + * @method $this setex($key, $seconds, $value) + * @method $this setnx($key, $value) + * @method $this setrange($key, $offset, $value) + * @method $this strlen($key) + * @method $this hdel($key, array $fields) + * @method $this hexists($key, $field) + * @method $this hget($key, $field) + * @method $this hgetall($key) + * @method $this hincrby($key, $field, $increment) + * @method $this hincrbyfloat($key, $field, $increment) + * @method $this hkeys($key) + * @method $this hlen($key) + * @method $this hmget($key, array $fields) + * @method $this hmset($key, array $dictionary) + * @method $this hscan($key, $cursor, array $options = null) + * @method $this hset($key, $field, $value) + * @method $this hsetnx($key, $field, $value) + * @method $this hvals($key) + * @method $this hstrlen($key, $field) + * @method $this blpop(array $keys, $timeout) + * @method $this brpop(array $keys, $timeout) + * @method $this brpoplpush($source, $destination, $timeout) + * @method $this lindex($key, $index) + * @method $this linsert($key, $whence, $pivot, $value) + * @method $this llen($key) + * @method $this lpop($key) + * @method $this lpush($key, array $values) + * @method $this lpushx($key, $value) + * @method $this lrange($key, $start, $stop) + * @method $this lrem($key, $count, $value) + * @method $this lset($key, $index, $value) + * @method $this ltrim($key, $start, $stop) + * @method $this rpop($key) + * @method $this rpoplpush($source, $destination) + * @method $this rpush($key, array $values) + * @method $this rpushx($key, $value) + * @method $this sadd($key, array $members) + * @method $this scard($key) + * @method $this sdiff(array $keys) + * @method $this sdiffstore($destination, array $keys) + * @method $this sinter(array $keys) + * @method $this sinterstore($destination, array $keys) + * @method $this sismember($key, $member) + * @method $this smembers($key) + * @method $this smove($source, $destination, $member) + * @method $this spop($key, $count = null) + * @method $this srandmember($key, $count = null) + * @method $this srem($key, $member) + * @method $this sscan($key, $cursor, array $options = null) + * @method $this sunion(array $keys) + * @method $this sunionstore($destination, array $keys) + * @method $this zadd($key, array $membersAndScoresDictionary) + * @method $this zcard($key) + * @method $this zcount($key, $min, $max) + * @method $this zincrby($key, $increment, $member) + * @method $this zinterstore($destination, array $keys, array $options = null) + * @method $this zrange($key, $start, $stop, array $options = null) + * @method $this zrangebyscore($key, $min, $max, array $options = null) + * @method $this zrank($key, $member) + * @method $this zrem($key, $member) + * @method $this zremrangebyrank($key, $start, $stop) + * @method $this zremrangebyscore($key, $min, $max) + * @method $this zrevrange($key, $start, $stop, array $options = null) + * @method $this zrevrangebyscore($key, $min, $max, array $options = null) + * @method $this zrevrank($key, $member) + * @method $this zunionstore($destination, array $keys, array $options = null) + * @method $this zscore($key, $member) + * @method $this zscan($key, $cursor, array $options = null) + * @method $this zrangebylex($key, $start, $stop, array $options = null) + * @method $this zrevrangebylex($key, $start, $stop, array $options = null) + * @method $this zremrangebylex($key, $min, $max) + * @method $this zlexcount($key, $min, $max) + * @method $this pfadd($key, array $elements) + * @method $this pfmerge($destinationKey, array $sourceKeys) + * @method $this pfcount(array $keys) + * @method $this pubsub($subcommand, $argument) + * @method $this publish($channel, $message) + * @method $this discard() + * @method $this exec() + * @method $this multi() + * @method $this unwatch() + * @method $this watch($key) + * @method $this eval($script, $numkeys, $keyOrArg1 = null, $keyOrArgN = null) + * @method $this evalsha($script, $numkeys, $keyOrArg1 = null, $keyOrArgN = null) + * @method $this script($subcommand, $argument = null) + * @method $this auth($password) + * @method $this echo($message) + * @method $this ping($message = null) + * @method $this select($database) + * @method $this bgrewriteaof() + * @method $this bgsave() + * @method $this client($subcommand, $argument = null) + * @method $this config($subcommand, $argument = null) + * @method $this dbsize() + * @method $this flushall() + * @method $this flushdb() + * @method $this info($section = null) + * @method $this lastsave() + * @method $this save() + * @method $this slaveof($host, $port) + * @method $this slowlog($subcommand, $argument = null) + * @method $this time() + * @method $this command() + * @method $this geoadd($key, $longitude, $latitude, $member) + * @method $this geohash($key, array $members) + * @method $this geopos($key, array $members) + * @method $this geodist($key, $member1, $member2, $unit = null) + * @method $this georadius($key, $longitude, $latitude, $radius, $unit, array $options = null) + * @method $this georadiusbymember($key, $member, $radius, $unit, array $options = null) + * + * @author Daniele Alessandri + */ +interface ClientContextInterface +{ + /** + * Sends the specified command instance to Redis. + * + * @param CommandInterface $command Command instance. + * + * @return mixed + */ + public function executeCommand(CommandInterface $command); + + /** + * Sends the specified command with its arguments to Redis. + * + * @param string $method Command ID. + * @param array $arguments Arguments for the command. + * + * @return mixed + */ + public function __call($method, $arguments); + + /** + * Starts the execution of the context. + * + * @param mixed $callable Optional callback for execution. + * + * @return array + */ + public function execute($callable = null); +} diff --git a/vendor/predis/predis/src/ClientException.php b/vendor/predis/predis/src/ClientException.php new file mode 100644 index 00000000..5b404d86 --- /dev/null +++ b/vendor/predis/predis/src/ClientException.php @@ -0,0 +1,21 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis; + +/** + * Exception class that identifies client-side errors. + * + * @author Daniele Alessandri + */ +class ClientException extends PredisException +{ +} diff --git a/vendor/predis/predis/src/ClientInterface.php b/vendor/predis/predis/src/ClientInterface.php new file mode 100644 index 00000000..d0b0be49 --- /dev/null +++ b/vendor/predis/predis/src/ClientInterface.php @@ -0,0 +1,239 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis; + +use Predis\Command\CommandInterface; +use Predis\Configuration\OptionsInterface; +use Predis\Connection\ConnectionInterface; +use Predis\Profile\ProfileInterface; + +/** + * Interface defining a client able to execute commands against Redis. + * + * All the commands exposed by the client generally have the same signature as + * described by the Redis documentation, but some of them offer an additional + * and more friendly interface to ease programming which is described in the + * following list of methods: + * + * @method int del(array $keys) + * @method string dump($key) + * @method int exists($key) + * @method int expire($key, $seconds) + * @method int expireat($key, $timestamp) + * @method array keys($pattern) + * @method int move($key, $db) + * @method mixed object($subcommand, $key) + * @method int persist($key) + * @method int pexpire($key, $milliseconds) + * @method int pexpireat($key, $timestamp) + * @method int pttl($key) + * @method string randomkey() + * @method mixed rename($key, $target) + * @method int renamenx($key, $target) + * @method array scan($cursor, array $options = null) + * @method array sort($key, array $options = null) + * @method int ttl($key) + * @method mixed type($key) + * @method int append($key, $value) + * @method int bitcount($key, $start = null, $end = null) + * @method int bitop($operation, $destkey, $key) + * @method array bitfield($key, $subcommand, ...$subcommandArg) + * @method int decr($key) + * @method int decrby($key, $decrement) + * @method string get($key) + * @method int getbit($key, $offset) + * @method string getrange($key, $start, $end) + * @method string getset($key, $value) + * @method int incr($key) + * @method int incrby($key, $increment) + * @method string incrbyfloat($key, $increment) + * @method array mget(array $keys) + * @method mixed mset(array $dictionary) + * @method int msetnx(array $dictionary) + * @method mixed psetex($key, $milliseconds, $value) + * @method mixed set($key, $value, $expireResolution = null, $expireTTL = null, $flag = null) + * @method int setbit($key, $offset, $value) + * @method int setex($key, $seconds, $value) + * @method int setnx($key, $value) + * @method int setrange($key, $offset, $value) + * @method int strlen($key) + * @method int hdel($key, array $fields) + * @method int hexists($key, $field) + * @method string hget($key, $field) + * @method array hgetall($key) + * @method int hincrby($key, $field, $increment) + * @method string hincrbyfloat($key, $field, $increment) + * @method array hkeys($key) + * @method int hlen($key) + * @method array hmget($key, array $fields) + * @method mixed hmset($key, array $dictionary) + * @method array hscan($key, $cursor, array $options = null) + * @method int hset($key, $field, $value) + * @method int hsetnx($key, $field, $value) + * @method array hvals($key) + * @method int hstrlen($key, $field) + * @method array blpop(array $keys, $timeout) + * @method array brpop(array $keys, $timeout) + * @method array brpoplpush($source, $destination, $timeout) + * @method string lindex($key, $index) + * @method int linsert($key, $whence, $pivot, $value) + * @method int llen($key) + * @method string lpop($key) + * @method int lpush($key, array $values) + * @method int lpushx($key, $value) + * @method array lrange($key, $start, $stop) + * @method int lrem($key, $count, $value) + * @method mixed lset($key, $index, $value) + * @method mixed ltrim($key, $start, $stop) + * @method string rpop($key) + * @method string rpoplpush($source, $destination) + * @method int rpush($key, array $values) + * @method int rpushx($key, $value) + * @method int sadd($key, array $members) + * @method int scard($key) + * @method array sdiff(array $keys) + * @method int sdiffstore($destination, array $keys) + * @method array sinter(array $keys) + * @method int sinterstore($destination, array $keys) + * @method int sismember($key, $member) + * @method array smembers($key) + * @method int smove($source, $destination, $member) + * @method string spop($key, $count = null) + * @method string srandmember($key, $count = null) + * @method int srem($key, $member) + * @method array sscan($key, $cursor, array $options = null) + * @method array sunion(array $keys) + * @method int sunionstore($destination, array $keys) + * @method int zadd($key, array $membersAndScoresDictionary) + * @method int zcard($key) + * @method string zcount($key, $min, $max) + * @method string zincrby($key, $increment, $member) + * @method int zinterstore($destination, array $keys, array $options = null) + * @method array zrange($key, $start, $stop, array $options = null) + * @method array zrangebyscore($key, $min, $max, array $options = null) + * @method int zrank($key, $member) + * @method int zrem($key, $member) + * @method int zremrangebyrank($key, $start, $stop) + * @method int zremrangebyscore($key, $min, $max) + * @method array zrevrange($key, $start, $stop, array $options = null) + * @method array zrevrangebyscore($key, $max, $min, array $options = null) + * @method int zrevrank($key, $member) + * @method int zunionstore($destination, array $keys, array $options = null) + * @method string zscore($key, $member) + * @method array zscan($key, $cursor, array $options = null) + * @method array zrangebylex($key, $start, $stop, array $options = null) + * @method array zrevrangebylex($key, $start, $stop, array $options = null) + * @method int zremrangebylex($key, $min, $max) + * @method int zlexcount($key, $min, $max) + * @method int pfadd($key, array $elements) + * @method mixed pfmerge($destinationKey, array $sourceKeys) + * @method int pfcount(array $keys) + * @method mixed pubsub($subcommand, $argument) + * @method int publish($channel, $message) + * @method mixed discard() + * @method array exec() + * @method mixed multi() + * @method mixed unwatch() + * @method mixed watch($key) + * @method mixed eval($script, $numkeys, $keyOrArg1 = null, $keyOrArgN = null) + * @method mixed evalsha($script, $numkeys, $keyOrArg1 = null, $keyOrArgN = null) + * @method mixed script($subcommand, $argument = null) + * @method mixed auth($password) + * @method string echo($message) + * @method mixed ping($message = null) + * @method mixed select($database) + * @method mixed bgrewriteaof() + * @method mixed bgsave() + * @method mixed client($subcommand, $argument = null) + * @method mixed config($subcommand, $argument = null) + * @method int dbsize() + * @method mixed flushall() + * @method mixed flushdb() + * @method array info($section = null) + * @method int lastsave() + * @method mixed save() + * @method mixed slaveof($host, $port) + * @method mixed slowlog($subcommand, $argument = null) + * @method array time() + * @method array command() + * @method int geoadd($key, $longitude, $latitude, $member) + * @method array geohash($key, array $members) + * @method array geopos($key, array $members) + * @method string geodist($key, $member1, $member2, $unit = null) + * @method array georadius($key, $longitude, $latitude, $radius, $unit, array $options = null) + * @method array georadiusbymember($key, $member, $radius, $unit, array $options = null) + * + * @author Daniele Alessandri + */ +interface ClientInterface +{ + /** + * Returns the server profile used by the client. + * + * @return ProfileInterface + */ + public function getProfile(); + + /** + * Returns the client options specified upon initialization. + * + * @return OptionsInterface + */ + public function getOptions(); + + /** + * Opens the underlying connection to the server. + */ + public function connect(); + + /** + * Closes the underlying connection from the server. + */ + public function disconnect(); + + /** + * Returns the underlying connection instance. + * + * @return ConnectionInterface + */ + public function getConnection(); + + /** + * Creates a new instance of the specified Redis command. + * + * @param string $method Command ID. + * @param array $arguments Arguments for the command. + * + * @return CommandInterface + */ + public function createCommand($method, $arguments = array()); + + /** + * Executes the specified Redis command. + * + * @param CommandInterface $command Command instance. + * + * @return mixed + */ + public function executeCommand(CommandInterface $command); + + /** + * Creates a Redis command with the specified arguments and sends a request + * to the server. + * + * @param string $method Command ID. + * @param array $arguments Arguments for the command. + * + * @return mixed + */ + public function __call($method, $arguments); +} diff --git a/vendor/predis/predis/src/Cluster/ClusterStrategy.php b/vendor/predis/predis/src/Cluster/ClusterStrategy.php new file mode 100644 index 00000000..4f24cf97 --- /dev/null +++ b/vendor/predis/predis/src/Cluster/ClusterStrategy.php @@ -0,0 +1,469 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Cluster; + +use Predis\Command\CommandInterface; +use Predis\Command\ScriptCommand; + +/** + * Common class implementing the logic needed to support clustering strategies. + * + * @author Daniele Alessandri + */ +abstract class ClusterStrategy implements StrategyInterface +{ + protected $commands; + + /** + * + */ + public function __construct() + { + $this->commands = $this->getDefaultCommands(); + } + + /** + * Returns the default map of supported commands with their handlers. + * + * @return array + */ + protected function getDefaultCommands() + { + $getKeyFromFirstArgument = array($this, 'getKeyFromFirstArgument'); + $getKeyFromAllArguments = array($this, 'getKeyFromAllArguments'); + + return array( + /* commands operating on the key space */ + 'EXISTS' => $getKeyFromAllArguments, + 'DEL' => $getKeyFromAllArguments, + 'TYPE' => $getKeyFromFirstArgument, + 'EXPIRE' => $getKeyFromFirstArgument, + 'EXPIREAT' => $getKeyFromFirstArgument, + 'PERSIST' => $getKeyFromFirstArgument, + 'PEXPIRE' => $getKeyFromFirstArgument, + 'PEXPIREAT' => $getKeyFromFirstArgument, + 'TTL' => $getKeyFromFirstArgument, + 'PTTL' => $getKeyFromFirstArgument, + 'SORT' => array($this, 'getKeyFromSortCommand'), + 'DUMP' => $getKeyFromFirstArgument, + 'RESTORE' => $getKeyFromFirstArgument, + + /* commands operating on string values */ + 'APPEND' => $getKeyFromFirstArgument, + 'DECR' => $getKeyFromFirstArgument, + 'DECRBY' => $getKeyFromFirstArgument, + 'GET' => $getKeyFromFirstArgument, + 'GETBIT' => $getKeyFromFirstArgument, + 'MGET' => $getKeyFromAllArguments, + 'SET' => $getKeyFromFirstArgument, + 'GETRANGE' => $getKeyFromFirstArgument, + 'GETSET' => $getKeyFromFirstArgument, + 'INCR' => $getKeyFromFirstArgument, + 'INCRBY' => $getKeyFromFirstArgument, + 'INCRBYFLOAT' => $getKeyFromFirstArgument, + 'SETBIT' => $getKeyFromFirstArgument, + 'SETEX' => $getKeyFromFirstArgument, + 'MSET' => array($this, 'getKeyFromInterleavedArguments'), + 'MSETNX' => array($this, 'getKeyFromInterleavedArguments'), + 'SETNX' => $getKeyFromFirstArgument, + 'SETRANGE' => $getKeyFromFirstArgument, + 'STRLEN' => $getKeyFromFirstArgument, + 'SUBSTR' => $getKeyFromFirstArgument, + 'BITOP' => array($this, 'getKeyFromBitOp'), + 'BITCOUNT' => $getKeyFromFirstArgument, + 'BITFIELD' => $getKeyFromFirstArgument, + + /* commands operating on lists */ + 'LINSERT' => $getKeyFromFirstArgument, + 'LINDEX' => $getKeyFromFirstArgument, + 'LLEN' => $getKeyFromFirstArgument, + 'LPOP' => $getKeyFromFirstArgument, + 'RPOP' => $getKeyFromFirstArgument, + 'RPOPLPUSH' => $getKeyFromAllArguments, + 'BLPOP' => array($this, 'getKeyFromBlockingListCommands'), + 'BRPOP' => array($this, 'getKeyFromBlockingListCommands'), + 'BRPOPLPUSH' => array($this, 'getKeyFromBlockingListCommands'), + 'LPUSH' => $getKeyFromFirstArgument, + 'LPUSHX' => $getKeyFromFirstArgument, + 'RPUSH' => $getKeyFromFirstArgument, + 'RPUSHX' => $getKeyFromFirstArgument, + 'LRANGE' => $getKeyFromFirstArgument, + 'LREM' => $getKeyFromFirstArgument, + 'LSET' => $getKeyFromFirstArgument, + 'LTRIM' => $getKeyFromFirstArgument, + + /* commands operating on sets */ + 'SADD' => $getKeyFromFirstArgument, + 'SCARD' => $getKeyFromFirstArgument, + 'SDIFF' => $getKeyFromAllArguments, + 'SDIFFSTORE' => $getKeyFromAllArguments, + 'SINTER' => $getKeyFromAllArguments, + 'SINTERSTORE' => $getKeyFromAllArguments, + 'SUNION' => $getKeyFromAllArguments, + 'SUNIONSTORE' => $getKeyFromAllArguments, + 'SISMEMBER' => $getKeyFromFirstArgument, + 'SMEMBERS' => $getKeyFromFirstArgument, + 'SSCAN' => $getKeyFromFirstArgument, + 'SPOP' => $getKeyFromFirstArgument, + 'SRANDMEMBER' => $getKeyFromFirstArgument, + 'SREM' => $getKeyFromFirstArgument, + + /* commands operating on sorted sets */ + 'ZADD' => $getKeyFromFirstArgument, + 'ZCARD' => $getKeyFromFirstArgument, + 'ZCOUNT' => $getKeyFromFirstArgument, + 'ZINCRBY' => $getKeyFromFirstArgument, + 'ZINTERSTORE' => array($this, 'getKeyFromZsetAggregationCommands'), + 'ZRANGE' => $getKeyFromFirstArgument, + 'ZRANGEBYSCORE' => $getKeyFromFirstArgument, + 'ZRANK' => $getKeyFromFirstArgument, + 'ZREM' => $getKeyFromFirstArgument, + 'ZREMRANGEBYRANK' => $getKeyFromFirstArgument, + 'ZREMRANGEBYSCORE' => $getKeyFromFirstArgument, + 'ZREVRANGE' => $getKeyFromFirstArgument, + 'ZREVRANGEBYSCORE' => $getKeyFromFirstArgument, + 'ZREVRANK' => $getKeyFromFirstArgument, + 'ZSCORE' => $getKeyFromFirstArgument, + 'ZUNIONSTORE' => array($this, 'getKeyFromZsetAggregationCommands'), + 'ZSCAN' => $getKeyFromFirstArgument, + 'ZLEXCOUNT' => $getKeyFromFirstArgument, + 'ZRANGEBYLEX' => $getKeyFromFirstArgument, + 'ZREMRANGEBYLEX' => $getKeyFromFirstArgument, + 'ZREVRANGEBYLEX' => $getKeyFromFirstArgument, + + /* commands operating on hashes */ + 'HDEL' => $getKeyFromFirstArgument, + 'HEXISTS' => $getKeyFromFirstArgument, + 'HGET' => $getKeyFromFirstArgument, + 'HGETALL' => $getKeyFromFirstArgument, + 'HMGET' => $getKeyFromFirstArgument, + 'HMSET' => $getKeyFromFirstArgument, + 'HINCRBY' => $getKeyFromFirstArgument, + 'HINCRBYFLOAT' => $getKeyFromFirstArgument, + 'HKEYS' => $getKeyFromFirstArgument, + 'HLEN' => $getKeyFromFirstArgument, + 'HSET' => $getKeyFromFirstArgument, + 'HSETNX' => $getKeyFromFirstArgument, + 'HVALS' => $getKeyFromFirstArgument, + 'HSCAN' => $getKeyFromFirstArgument, + 'HSTRLEN' => $getKeyFromFirstArgument, + + /* commands operating on HyperLogLog */ + 'PFADD' => $getKeyFromFirstArgument, + 'PFCOUNT' => $getKeyFromAllArguments, + 'PFMERGE' => $getKeyFromAllArguments, + + /* scripting */ + 'EVAL' => array($this, 'getKeyFromScriptingCommands'), + 'EVALSHA' => array($this, 'getKeyFromScriptingCommands'), + + /* commands performing geospatial operations */ + 'GEOADD' => $getKeyFromFirstArgument, + 'GEOHASH' => $getKeyFromFirstArgument, + 'GEOPOS' => $getKeyFromFirstArgument, + 'GEODIST' => $getKeyFromFirstArgument, + 'GEORADIUS' => array($this, 'getKeyFromGeoradiusCommands'), + 'GEORADIUSBYMEMBER' => array($this, 'getKeyFromGeoradiusCommands'), + ); + } + + /** + * Returns the list of IDs for the supported commands. + * + * @return array + */ + public function getSupportedCommands() + { + return array_keys($this->commands); + } + + /** + * Sets an handler for the specified command ID. + * + * The signature of the callback must have a single parameter of type + * Predis\Command\CommandInterface. + * + * When the callback argument is omitted or NULL, the previously associated + * handler for the specified command ID is removed. + * + * @param string $commandID Command ID. + * @param mixed $callback A valid callable object, or NULL to unset the handler. + * + * @throws \InvalidArgumentException + */ + public function setCommandHandler($commandID, $callback = null) + { + $commandID = strtoupper($commandID); + + if (!isset($callback)) { + unset($this->commands[$commandID]); + + return; + } + + if (!is_callable($callback)) { + throw new \InvalidArgumentException( + 'The argument must be a callable object or NULL.' + ); + } + + $this->commands[$commandID] = $callback; + } + + /** + * Extracts the key from the first argument of a command instance. + * + * @param CommandInterface $command Command instance. + * + * @return string + */ + protected function getKeyFromFirstArgument(CommandInterface $command) + { + return $command->getArgument(0); + } + + /** + * Extracts the key from a command with multiple keys only when all keys in + * the arguments array produce the same hash. + * + * @param CommandInterface $command Command instance. + * + * @return string|null + */ + protected function getKeyFromAllArguments(CommandInterface $command) + { + $arguments = $command->getArguments(); + + if ($this->checkSameSlotForKeys($arguments)) { + return $arguments[0]; + } + } + + /** + * Extracts the key from a command with multiple keys only when all keys in + * the arguments array produce the same hash. + * + * @param CommandInterface $command Command instance. + * + * @return string|null + */ + protected function getKeyFromInterleavedArguments(CommandInterface $command) + { + $arguments = $command->getArguments(); + $keys = array(); + + for ($i = 0; $i < count($arguments); $i += 2) { + $keys[] = $arguments[$i]; + } + + if ($this->checkSameSlotForKeys($keys)) { + return $arguments[0]; + } + } + + /** + * Extracts the key from SORT command. + * + * @param CommandInterface $command Command instance. + * + * @return string|null + */ + protected function getKeyFromSortCommand(CommandInterface $command) + { + $arguments = $command->getArguments(); + $firstKey = $arguments[0]; + + if (1 === $argc = count($arguments)) { + return $firstKey; + } + + $keys = array($firstKey); + + for ($i = 1; $i < $argc; ++$i) { + if (strtoupper($arguments[$i]) === 'STORE') { + $keys[] = $arguments[++$i]; + } + } + + if ($this->checkSameSlotForKeys($keys)) { + return $firstKey; + } + } + + /** + * Extracts the key from BLPOP and BRPOP commands. + * + * @param CommandInterface $command Command instance. + * + * @return string|null + */ + protected function getKeyFromBlockingListCommands(CommandInterface $command) + { + $arguments = $command->getArguments(); + + if ($this->checkSameSlotForKeys(array_slice($arguments, 0, count($arguments) - 1))) { + return $arguments[0]; + } + } + + /** + * Extracts the key from BITOP command. + * + * @param CommandInterface $command Command instance. + * + * @return string|null + */ + protected function getKeyFromBitOp(CommandInterface $command) + { + $arguments = $command->getArguments(); + + if ($this->checkSameSlotForKeys(array_slice($arguments, 1, count($arguments)))) { + return $arguments[1]; + } + } + + /** + * Extracts the key from GEORADIUS and GEORADIUSBYMEMBER commands. + * + * @param CommandInterface $command Command instance. + * + * @return string|null + */ + protected function getKeyFromGeoradiusCommands(CommandInterface $command) + { + $arguments = $command->getArguments(); + $argc = count($arguments); + $startIndex = $command->getId() === 'GEORADIUS' ? 5 : 4; + + if ($argc > $startIndex) { + $keys = array($arguments[0]); + + for ($i = $startIndex; $i < $argc; ++$i) { + $argument = strtoupper($arguments[$i]); + if ($argument === 'STORE' || $argument === 'STOREDIST') { + $keys[] = $arguments[++$i]; + } + } + + if ($this->checkSameSlotForKeys($keys)) { + return $arguments[0]; + } else { + return; + } + } + + return $arguments[0]; + } + + /** + * Extracts the key from ZINTERSTORE and ZUNIONSTORE commands. + * + * @param CommandInterface $command Command instance. + * + * @return string|null + */ + protected function getKeyFromZsetAggregationCommands(CommandInterface $command) + { + $arguments = $command->getArguments(); + $keys = array_merge(array($arguments[0]), array_slice($arguments, 2, $arguments[1])); + + if ($this->checkSameSlotForKeys($keys)) { + return $arguments[0]; + } + } + + /** + * Extracts the key from EVAL and EVALSHA commands. + * + * @param CommandInterface $command Command instance. + * + * @return string|null + */ + protected function getKeyFromScriptingCommands(CommandInterface $command) + { + if ($command instanceof ScriptCommand) { + $keys = $command->getKeys(); + } else { + $keys = array_slice($args = $command->getArguments(), 2, $args[1]); + } + + if ($keys && $this->checkSameSlotForKeys($keys)) { + return $keys[0]; + } + } + + /** + * {@inheritdoc} + */ + public function getSlot(CommandInterface $command) + { + $slot = $command->getSlot(); + + if (!isset($slot) && isset($this->commands[$cmdID = $command->getId()])) { + $key = call_user_func($this->commands[$cmdID], $command); + + if (isset($key)) { + $slot = $this->getSlotByKey($key); + $command->setSlot($slot); + } + } + + return $slot; + } + + /** + * Checks if the specified array of keys will generate the same hash. + * + * @param array $keys Array of keys. + * + * @return bool + */ + protected function checkSameSlotForKeys(array $keys) + { + if (!$count = count($keys)) { + return false; + } + + $currentSlot = $this->getSlotByKey($keys[0]); + + for ($i = 1; $i < $count; ++$i) { + $nextSlot = $this->getSlotByKey($keys[$i]); + + if ($currentSlot !== $nextSlot) { + return false; + } + + $currentSlot = $nextSlot; + } + + return true; + } + + /** + * Returns only the hashable part of a key (delimited by "{...}"), or the + * whole key if a key tag is not found in the string. + * + * @param string $key A key. + * + * @return string + */ + protected function extractKeyTag($key) + { + if (false !== $start = strpos($key, '{')) { + if (false !== ($end = strpos($key, '}', $start)) && $end !== ++$start) { + $key = substr($key, $start, $end - $start); + } + } + + return $key; + } +} diff --git a/vendor/predis/predis/src/Cluster/Distributor/DistributorInterface.php b/vendor/predis/predis/src/Cluster/Distributor/DistributorInterface.php new file mode 100644 index 00000000..0f6ed485 --- /dev/null +++ b/vendor/predis/predis/src/Cluster/Distributor/DistributorInterface.php @@ -0,0 +1,82 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Cluster\Distributor; + +use Predis\Cluster\Hash\HashGeneratorInterface; + +/** + * A distributor implements the logic to automatically distribute keys among + * several nodes for client-side sharding. + * + * @author Daniele Alessandri + */ +interface DistributorInterface +{ + /** + * Adds a node to the distributor with an optional weight. + * + * @param mixed $node Node object. + * @param int $weight Weight for the node. + */ + public function add($node, $weight = null); + + /** + * Removes a node from the distributor. + * + * @param mixed $node Node object. + */ + public function remove($node); + + /** + * Returns the corresponding slot of a node from the distributor using the + * computed hash of a key. + * + * @param mixed $hash + * + * @return mixed + */ + public function getSlot($hash); + + /** + * Returns a node from the distributor using its assigned slot ID. + * + * @param mixed $slot + * + * @return mixed|null + */ + public function getBySlot($slot); + + /** + * Returns a node from the distributor using the computed hash of a key. + * + * @param mixed $hash + * + * @return mixed + */ + public function getByHash($hash); + + /** + * Returns a node from the distributor mapping to the specified value. + * + * @param string $value + * + * @return mixed + */ + public function get($value); + + /** + * Returns the underlying hash generator instance. + * + * @return HashGeneratorInterface + */ + public function getHashGenerator(); +} diff --git a/vendor/predis/predis/src/Cluster/Distributor/EmptyRingException.php b/vendor/predis/predis/src/Cluster/Distributor/EmptyRingException.php new file mode 100644 index 00000000..c986c084 --- /dev/null +++ b/vendor/predis/predis/src/Cluster/Distributor/EmptyRingException.php @@ -0,0 +1,21 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Cluster\Distributor; + +/** + * Exception class that identifies empty rings. + * + * @author Daniele Alessandri + */ +class EmptyRingException extends \Exception +{ +} diff --git a/vendor/predis/predis/src/Cluster/Distributor/HashRing.php b/vendor/predis/predis/src/Cluster/Distributor/HashRing.php new file mode 100644 index 00000000..fe2bf3d3 --- /dev/null +++ b/vendor/predis/predis/src/Cluster/Distributor/HashRing.php @@ -0,0 +1,270 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Cluster\Distributor; + +use Predis\Cluster\Hash\HashGeneratorInterface; + +/** + * This class implements an hashring-based distributor that uses the same + * algorithm of memcache to distribute keys in a cluster using client-side + * sharding. + * + * @author Daniele Alessandri + * @author Lorenzo Castelli + */ +class HashRing implements DistributorInterface, HashGeneratorInterface +{ + const DEFAULT_REPLICAS = 128; + const DEFAULT_WEIGHT = 100; + + private $ring; + private $ringKeys; + private $ringKeysCount; + private $replicas; + private $nodeHashCallback; + private $nodes = array(); + + /** + * @param int $replicas Number of replicas in the ring. + * @param mixed $nodeHashCallback Callback returning a string used to calculate the hash of nodes. + */ + public function __construct($replicas = self::DEFAULT_REPLICAS, $nodeHashCallback = null) + { + $this->replicas = $replicas; + $this->nodeHashCallback = $nodeHashCallback; + } + + /** + * Adds a node to the ring with an optional weight. + * + * @param mixed $node Node object. + * @param int $weight Weight for the node. + */ + public function add($node, $weight = null) + { + // In case of collisions in the hashes of the nodes, the node added + // last wins, thus the order in which nodes are added is significant. + $this->nodes[] = array( + 'object' => $node, + 'weight' => (int) $weight ?: $this::DEFAULT_WEIGHT, + ); + + $this->reset(); + } + + /** + * {@inheritdoc} + */ + public function remove($node) + { + // A node is removed by resetting the ring so that it's recreated from + // scratch, in order to reassign possible hashes with collisions to the + // right node according to the order in which they were added in the + // first place. + for ($i = 0; $i < count($this->nodes); ++$i) { + if ($this->nodes[$i]['object'] === $node) { + array_splice($this->nodes, $i, 1); + $this->reset(); + + break; + } + } + } + + /** + * Resets the distributor. + */ + private function reset() + { + unset( + $this->ring, + $this->ringKeys, + $this->ringKeysCount + ); + } + + /** + * Returns the initialization status of the distributor. + * + * @return bool + */ + private function isInitialized() + { + return isset($this->ringKeys); + } + + /** + * Calculates the total weight of all the nodes in the distributor. + * + * @return int + */ + private function computeTotalWeight() + { + $totalWeight = 0; + + foreach ($this->nodes as $node) { + $totalWeight += $node['weight']; + } + + return $totalWeight; + } + + /** + * Initializes the distributor. + */ + private function initialize() + { + if ($this->isInitialized()) { + return; + } + + if (!$this->nodes) { + throw new EmptyRingException('Cannot initialize an empty hashring.'); + } + + $this->ring = array(); + $totalWeight = $this->computeTotalWeight(); + $nodesCount = count($this->nodes); + + foreach ($this->nodes as $node) { + $weightRatio = $node['weight'] / $totalWeight; + $this->addNodeToRing($this->ring, $node, $nodesCount, $this->replicas, $weightRatio); + } + + ksort($this->ring, SORT_NUMERIC); + $this->ringKeys = array_keys($this->ring); + $this->ringKeysCount = count($this->ringKeys); + } + + /** + * Implements the logic needed to add a node to the hashring. + * + * @param array $ring Source hashring. + * @param mixed $node Node object to be added. + * @param int $totalNodes Total number of nodes. + * @param int $replicas Number of replicas in the ring. + * @param float $weightRatio Weight ratio for the node. + */ + protected function addNodeToRing(&$ring, $node, $totalNodes, $replicas, $weightRatio) + { + $nodeObject = $node['object']; + $nodeHash = $this->getNodeHash($nodeObject); + $replicas = (int) round($weightRatio * $totalNodes * $replicas); + + for ($i = 0; $i < $replicas; ++$i) { + $key = crc32("$nodeHash:$i"); + $ring[$key] = $nodeObject; + } + } + + /** + * {@inheritdoc} + */ + protected function getNodeHash($nodeObject) + { + if (!isset($this->nodeHashCallback)) { + return (string) $nodeObject; + } + + return call_user_func($this->nodeHashCallback, $nodeObject); + } + + /** + * {@inheritdoc} + */ + public function hash($value) + { + return crc32($value); + } + + /** + * {@inheritdoc} + */ + public function getByHash($hash) + { + return $this->ring[$this->getSlot($hash)]; + } + + /** + * {@inheritdoc} + */ + public function getBySlot($slot) + { + $this->initialize(); + + if (isset($this->ring[$slot])) { + return $this->ring[$slot]; + } + } + + /** + * {@inheritdoc} + */ + public function getSlot($hash) + { + $this->initialize(); + + $ringKeys = $this->ringKeys; + $upper = $this->ringKeysCount - 1; + $lower = 0; + + while ($lower <= $upper) { + $index = ($lower + $upper) >> 1; + $item = $ringKeys[$index]; + + if ($item > $hash) { + $upper = $index - 1; + } elseif ($item < $hash) { + $lower = $index + 1; + } else { + return $item; + } + } + + return $ringKeys[$this->wrapAroundStrategy($upper, $lower, $this->ringKeysCount)]; + } + + /** + * {@inheritdoc} + */ + public function get($value) + { + $hash = $this->hash($value); + $node = $this->getByHash($hash); + + return $node; + } + + /** + * Implements a strategy to deal with wrap-around errors during binary searches. + * + * @param int $upper + * @param int $lower + * @param int $ringKeysCount + * + * @return int + */ + protected function wrapAroundStrategy($upper, $lower, $ringKeysCount) + { + // Binary search for the last item in ringkeys with a value less or + // equal to the key. If no such item exists, return the last item. + return $upper >= 0 ? $upper : $ringKeysCount - 1; + } + + /** + * {@inheritdoc} + */ + public function getHashGenerator() + { + return $this; + } +} diff --git a/vendor/predis/predis/src/Cluster/Distributor/KetamaRing.php b/vendor/predis/predis/src/Cluster/Distributor/KetamaRing.php new file mode 100644 index 00000000..493807f0 --- /dev/null +++ b/vendor/predis/predis/src/Cluster/Distributor/KetamaRing.php @@ -0,0 +1,71 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Cluster\Distributor; + +/** + * This class implements an hashring-based distributor that uses the same + * algorithm of libketama to distribute keys in a cluster using client-side + * sharding. + * + * @author Daniele Alessandri + * @author Lorenzo Castelli + */ +class KetamaRing extends HashRing +{ + const DEFAULT_REPLICAS = 160; + + /** + * @param mixed $nodeHashCallback Callback returning a string used to calculate the hash of nodes. + */ + public function __construct($nodeHashCallback = null) + { + parent::__construct($this::DEFAULT_REPLICAS, $nodeHashCallback); + } + + /** + * {@inheritdoc} + */ + protected function addNodeToRing(&$ring, $node, $totalNodes, $replicas, $weightRatio) + { + $nodeObject = $node['object']; + $nodeHash = $this->getNodeHash($nodeObject); + $replicas = (int) floor($weightRatio * $totalNodes * ($replicas / 4)); + + for ($i = 0; $i < $replicas; ++$i) { + $unpackedDigest = unpack('V4', md5("$nodeHash-$i", true)); + + foreach ($unpackedDigest as $key) { + $ring[$key] = $nodeObject; + } + } + } + + /** + * {@inheritdoc} + */ + public function hash($value) + { + $hash = unpack('V', md5($value, true)); + + return $hash[1]; + } + + /** + * {@inheritdoc} + */ + protected function wrapAroundStrategy($upper, $lower, $ringKeysCount) + { + // Binary search for the first item in ringkeys with a value greater + // or equal to the key. If no such item exists, return the first item. + return $lower < $ringKeysCount ? $lower : 0; + } +} diff --git a/vendor/predis/predis/src/Cluster/Hash/CRC16.php b/vendor/predis/predis/src/Cluster/Hash/CRC16.php new file mode 100644 index 00000000..d6e1b2dc --- /dev/null +++ b/vendor/predis/predis/src/Cluster/Hash/CRC16.php @@ -0,0 +1,72 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Cluster\Hash; + +/** + * Hash generator implementing the CRC-CCITT-16 algorithm used by redis-cluster. + * + * @author Daniele Alessandri + */ +class CRC16 implements HashGeneratorInterface +{ + private static $CCITT_16 = array( + 0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50A5, 0x60C6, 0x70E7, + 0x8108, 0x9129, 0xA14A, 0xB16B, 0xC18C, 0xD1AD, 0xE1CE, 0xF1EF, + 0x1231, 0x0210, 0x3273, 0x2252, 0x52B5, 0x4294, 0x72F7, 0x62D6, + 0x9339, 0x8318, 0xB37B, 0xA35A, 0xD3BD, 0xC39C, 0xF3FF, 0xE3DE, + 0x2462, 0x3443, 0x0420, 0x1401, 0x64E6, 0x74C7, 0x44A4, 0x5485, + 0xA56A, 0xB54B, 0x8528, 0x9509, 0xE5EE, 0xF5CF, 0xC5AC, 0xD58D, + 0x3653, 0x2672, 0x1611, 0x0630, 0x76D7, 0x66F6, 0x5695, 0x46B4, + 0xB75B, 0xA77A, 0x9719, 0x8738, 0xF7DF, 0xE7FE, 0xD79D, 0xC7BC, + 0x48C4, 0x58E5, 0x6886, 0x78A7, 0x0840, 0x1861, 0x2802, 0x3823, + 0xC9CC, 0xD9ED, 0xE98E, 0xF9AF, 0x8948, 0x9969, 0xA90A, 0xB92B, + 0x5AF5, 0x4AD4, 0x7AB7, 0x6A96, 0x1A71, 0x0A50, 0x3A33, 0x2A12, + 0xDBFD, 0xCBDC, 0xFBBF, 0xEB9E, 0x9B79, 0x8B58, 0xBB3B, 0xAB1A, + 0x6CA6, 0x7C87, 0x4CE4, 0x5CC5, 0x2C22, 0x3C03, 0x0C60, 0x1C41, + 0xEDAE, 0xFD8F, 0xCDEC, 0xDDCD, 0xAD2A, 0xBD0B, 0x8D68, 0x9D49, + 0x7E97, 0x6EB6, 0x5ED5, 0x4EF4, 0x3E13, 0x2E32, 0x1E51, 0x0E70, + 0xFF9F, 0xEFBE, 0xDFDD, 0xCFFC, 0xBF1B, 0xAF3A, 0x9F59, 0x8F78, + 0x9188, 0x81A9, 0xB1CA, 0xA1EB, 0xD10C, 0xC12D, 0xF14E, 0xE16F, + 0x1080, 0x00A1, 0x30C2, 0x20E3, 0x5004, 0x4025, 0x7046, 0x6067, + 0x83B9, 0x9398, 0xA3FB, 0xB3DA, 0xC33D, 0xD31C, 0xE37F, 0xF35E, + 0x02B1, 0x1290, 0x22F3, 0x32D2, 0x4235, 0x5214, 0x6277, 0x7256, + 0xB5EA, 0xA5CB, 0x95A8, 0x8589, 0xF56E, 0xE54F, 0xD52C, 0xC50D, + 0x34E2, 0x24C3, 0x14A0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405, + 0xA7DB, 0xB7FA, 0x8799, 0x97B8, 0xE75F, 0xF77E, 0xC71D, 0xD73C, + 0x26D3, 0x36F2, 0x0691, 0x16B0, 0x6657, 0x7676, 0x4615, 0x5634, + 0xD94C, 0xC96D, 0xF90E, 0xE92F, 0x99C8, 0x89E9, 0xB98A, 0xA9AB, + 0x5844, 0x4865, 0x7806, 0x6827, 0x18C0, 0x08E1, 0x3882, 0x28A3, + 0xCB7D, 0xDB5C, 0xEB3F, 0xFB1E, 0x8BF9, 0x9BD8, 0xABBB, 0xBB9A, + 0x4A75, 0x5A54, 0x6A37, 0x7A16, 0x0AF1, 0x1AD0, 0x2AB3, 0x3A92, + 0xFD2E, 0xED0F, 0xDD6C, 0xCD4D, 0xBDAA, 0xAD8B, 0x9DE8, 0x8DC9, + 0x7C26, 0x6C07, 0x5C64, 0x4C45, 0x3CA2, 0x2C83, 0x1CE0, 0x0CC1, + 0xEF1F, 0xFF3E, 0xCF5D, 0xDF7C, 0xAF9B, 0xBFBA, 0x8FD9, 0x9FF8, + 0x6E17, 0x7E36, 0x4E55, 0x5E74, 0x2E93, 0x3EB2, 0x0ED1, 0x1EF0, + ); + + /** + * {@inheritdoc} + */ + public function hash($value) + { + // CRC-CCITT-16 algorithm + $crc = 0; + $CCITT_16 = self::$CCITT_16; + $strlen = strlen($value); + + for ($i = 0; $i < $strlen; ++$i) { + $crc = (($crc << 8) ^ $CCITT_16[($crc >> 8) ^ ord($value[$i])]) & 0xFFFF; + } + + return $crc; + } +} diff --git a/vendor/predis/predis/src/Cluster/Hash/HashGeneratorInterface.php b/vendor/predis/predis/src/Cluster/Hash/HashGeneratorInterface.php new file mode 100644 index 00000000..3fb92a39 --- /dev/null +++ b/vendor/predis/predis/src/Cluster/Hash/HashGeneratorInterface.php @@ -0,0 +1,30 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Cluster\Hash; + +/** + * An hash generator implements the logic used to calculate the hash of a key to + * distribute operations among Redis nodes. + * + * @author Daniele Alessandri + */ +interface HashGeneratorInterface +{ + /** + * Generates an hash from a string to be used for distribution. + * + * @param string $value String value. + * + * @return int + */ + public function hash($value); +} diff --git a/vendor/predis/predis/src/Cluster/PredisStrategy.php b/vendor/predis/predis/src/Cluster/PredisStrategy.php new file mode 100644 index 00000000..2fdf1dbd --- /dev/null +++ b/vendor/predis/predis/src/Cluster/PredisStrategy.php @@ -0,0 +1,79 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Cluster; + +use Predis\Cluster\Distributor\DistributorInterface; +use Predis\Cluster\Distributor\HashRing; + +/** + * Default cluster strategy used by Predis to handle client-side sharding. + * + * @author Daniele Alessandri + */ +class PredisStrategy extends ClusterStrategy +{ + protected $distributor; + + /** + * @param DistributorInterface $distributor Optional distributor instance. + */ + public function __construct(DistributorInterface $distributor = null) + { + parent::__construct(); + + $this->distributor = $distributor ?: new HashRing(); + } + + /** + * {@inheritdoc} + */ + public function getSlotByKey($key) + { + $key = $this->extractKeyTag($key); + $hash = $this->distributor->hash($key); + $slot = $this->distributor->getSlot($hash); + + return $slot; + } + + /** + * {@inheritdoc} + */ + protected function checkSameSlotForKeys(array $keys) + { + if (!$count = count($keys)) { + return false; + } + + $currentKey = $this->extractKeyTag($keys[0]); + + for ($i = 1; $i < $count; ++$i) { + $nextKey = $this->extractKeyTag($keys[$i]); + + if ($currentKey !== $nextKey) { + return false; + } + + $currentKey = $nextKey; + } + + return true; + } + + /** + * {@inheritdoc} + */ + public function getDistributor() + { + return $this->distributor; + } +} diff --git a/vendor/predis/predis/src/Cluster/RedisStrategy.php b/vendor/predis/predis/src/Cluster/RedisStrategy.php new file mode 100644 index 00000000..cea1890a --- /dev/null +++ b/vendor/predis/predis/src/Cluster/RedisStrategy.php @@ -0,0 +1,58 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Cluster; + +use Predis\Cluster\Hash\CRC16; +use Predis\Cluster\Hash\HashGeneratorInterface; +use Predis\NotSupportedException; + +/** + * Default class used by Predis to calculate hashes out of keys of + * commands supported by redis-cluster. + * + * @author Daniele Alessandri + */ +class RedisStrategy extends ClusterStrategy +{ + protected $hashGenerator; + + /** + * @param HashGeneratorInterface $hashGenerator Hash generator instance. + */ + public function __construct(HashGeneratorInterface $hashGenerator = null) + { + parent::__construct(); + + $this->hashGenerator = $hashGenerator ?: new CRC16(); + } + + /** + * {@inheritdoc} + */ + public function getSlotByKey($key) + { + $key = $this->extractKeyTag($key); + $slot = $this->hashGenerator->hash($key) & 0x3FFF; + + return $slot; + } + + /** + * {@inheritdoc} + */ + public function getDistributor() + { + throw new NotSupportedException( + 'This cluster strategy does not provide an external distributor' + ); + } +} diff --git a/vendor/predis/predis/src/Cluster/StrategyInterface.php b/vendor/predis/predis/src/Cluster/StrategyInterface.php new file mode 100644 index 00000000..e6f37774 --- /dev/null +++ b/vendor/predis/predis/src/Cluster/StrategyInterface.php @@ -0,0 +1,53 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Cluster; + +use Predis\Cluster\Distributor\DistributorInterface; +use Predis\Command\CommandInterface; + +/** + * Interface for classes defining the strategy used to calculate an hash out of + * keys extracted from supported commands. + * + * This is mostly useful to support clustering via client-side sharding. + * + * @author Daniele Alessandri + */ +interface StrategyInterface +{ + /** + * Returns a slot for the given command used for clustering distribution or + * NULL when this is not possible. + * + * @param CommandInterface $command Command instance. + * + * @return int + */ + public function getSlot(CommandInterface $command); + + /** + * Returns a slot for the given key used for clustering distribution or NULL + * when this is not possible. + * + * @param string $key Key string. + * + * @return int + */ + public function getSlotByKey($key); + + /** + * Returns a distributor instance to be used by the cluster. + * + * @return DistributorInterface + */ + public function getDistributor(); +} diff --git a/vendor/predis/predis/src/Collection/Iterator/CursorBasedIterator.php b/vendor/predis/predis/src/Collection/Iterator/CursorBasedIterator.php new file mode 100644 index 00000000..7557b73a --- /dev/null +++ b/vendor/predis/predis/src/Collection/Iterator/CursorBasedIterator.php @@ -0,0 +1,191 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Collection\Iterator; + +use Predis\ClientInterface; +use Predis\NotSupportedException; + +/** + * Provides the base implementation for a fully-rewindable PHP iterator that can + * incrementally iterate over cursor-based collections stored on Redis using the + * commands in the `SCAN` family. + * + * Given their incremental nature with multiple fetches, these kind of iterators + * offer limited guarantees about the returned elements because the collection + * can change several times during the iteration process. + * + * @see http://redis.io/commands/scan + * + * @author Daniele Alessandri + */ +abstract class CursorBasedIterator implements \Iterator +{ + protected $client; + protected $match; + protected $count; + + protected $valid; + protected $fetchmore; + protected $elements; + protected $cursor; + protected $position; + protected $current; + + /** + * @param ClientInterface $client Client connected to Redis. + * @param string $match Pattern to match during the server-side iteration. + * @param int $count Hint used by Redis to compute the number of results per iteration. + */ + public function __construct(ClientInterface $client, $match = null, $count = null) + { + $this->client = $client; + $this->match = $match; + $this->count = $count; + + $this->reset(); + } + + /** + * Ensures that the client supports the specified Redis command required to + * fetch elements from the server to perform the iteration. + * + * @param ClientInterface $client Client connected to Redis. + * @param string $commandID Command ID. + * + * @throws NotSupportedException + */ + protected function requiredCommand(ClientInterface $client, $commandID) + { + if (!$client->getProfile()->supportsCommand($commandID)) { + throw new NotSupportedException("The current profile does not support '$commandID'."); + } + } + + /** + * Resets the inner state of the iterator. + */ + protected function reset() + { + $this->valid = true; + $this->fetchmore = true; + $this->elements = array(); + $this->cursor = 0; + $this->position = -1; + $this->current = null; + } + + /** + * Returns an array of options for the `SCAN` command. + * + * @return array + */ + protected function getScanOptions() + { + $options = array(); + + if (strlen($this->match) > 0) { + $options['MATCH'] = $this->match; + } + + if ($this->count > 0) { + $options['COUNT'] = $this->count; + } + + return $options; + } + + /** + * Fetches a new set of elements from the remote collection, effectively + * advancing the iteration process. + * + * @return array + */ + abstract protected function executeCommand(); + + /** + * Populates the local buffer of elements fetched from the server during + * the iteration. + */ + protected function fetch() + { + list($cursor, $elements) = $this->executeCommand(); + + if (!$cursor) { + $this->fetchmore = false; + } + + $this->cursor = $cursor; + $this->elements = $elements; + } + + /** + * Extracts next values for key() and current(). + */ + protected function extractNext() + { + ++$this->position; + $this->current = array_shift($this->elements); + } + + /** + * {@inheritdoc} + */ + public function rewind() + { + $this->reset(); + $this->next(); + } + + /** + * {@inheritdoc} + */ + public function current() + { + return $this->current; + } + + /** + * {@inheritdoc} + */ + public function key() + { + return $this->position; + } + + /** + * {@inheritdoc} + */ + public function next() + { + tryFetch: { + if (!$this->elements && $this->fetchmore) { + $this->fetch(); + } + + if ($this->elements) { + $this->extractNext(); + } elseif ($this->cursor) { + goto tryFetch; + } else { + $this->valid = false; + } + } + } + + /** + * {@inheritdoc} + */ + public function valid() + { + return $this->valid; + } +} diff --git a/vendor/predis/predis/src/Collection/Iterator/HashKey.php b/vendor/predis/predis/src/Collection/Iterator/HashKey.php new file mode 100644 index 00000000..38286a89 --- /dev/null +++ b/vendor/predis/predis/src/Collection/Iterator/HashKey.php @@ -0,0 +1,60 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Collection\Iterator; + +use Predis\ClientInterface; + +/** + * Abstracts the iteration of fields and values of an hash by leveraging the + * HSCAN command (Redis >= 2.8) wrapped in a fully-rewindable PHP iterator. + * + * @author Daniele Alessandri + * + * @link http://redis.io/commands/scan + */ +class HashKey extends CursorBasedIterator +{ + protected $key; + + /** + * {@inheritdoc} + */ + public function __construct(ClientInterface $client, $key, $match = null, $count = null) + { + $this->requiredCommand($client, 'HSCAN'); + + parent::__construct($client, $match, $count); + + $this->key = $key; + } + + /** + * {@inheritdoc} + */ + protected function executeCommand() + { + return $this->client->hscan($this->key, $this->cursor, $this->getScanOptions()); + } + + /** + * {@inheritdoc} + */ + protected function extractNext() + { + if ($kv = each($this->elements)) { + $this->position = $kv[0]; + $this->current = $kv[1]; + + unset($this->elements[$this->position]); + } + } +} diff --git a/vendor/predis/predis/src/Collection/Iterator/Keyspace.php b/vendor/predis/predis/src/Collection/Iterator/Keyspace.php new file mode 100644 index 00000000..20f9e203 --- /dev/null +++ b/vendor/predis/predis/src/Collection/Iterator/Keyspace.php @@ -0,0 +1,43 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Collection\Iterator; + +use Predis\ClientInterface; + +/** + * Abstracts the iteration of the keyspace on a Redis instance by leveraging the + * SCAN command (Redis >= 2.8) wrapped in a fully-rewindable PHP iterator. + * + * @author Daniele Alessandri + * + * @link http://redis.io/commands/scan + */ +class Keyspace extends CursorBasedIterator +{ + /** + * {@inheritdoc} + */ + public function __construct(ClientInterface $client, $match = null, $count = null) + { + $this->requiredCommand($client, 'SCAN'); + + parent::__construct($client, $match, $count); + } + + /** + * {@inheritdoc} + */ + protected function executeCommand() + { + return $this->client->scan($this->cursor, $this->getScanOptions()); + } +} diff --git a/vendor/predis/predis/src/Collection/Iterator/ListKey.php b/vendor/predis/predis/src/Collection/Iterator/ListKey.php new file mode 100644 index 00000000..5f3aaa7f --- /dev/null +++ b/vendor/predis/predis/src/Collection/Iterator/ListKey.php @@ -0,0 +1,176 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Collection\Iterator; + +use Predis\ClientInterface; +use Predis\NotSupportedException; + +/** + * Abstracts the iteration of items stored in a list by leveraging the LRANGE + * command wrapped in a fully-rewindable PHP iterator. + * + * This iterator tries to emulate the behaviour of cursor-based iterators based + * on the SCAN-family of commands introduced in Redis <= 2.8, meaning that due + * to its incremental nature with multiple fetches it can only offer limited + * guarantees on the returned elements because the collection can change several + * times (trimmed, deleted, overwritten) during the iteration process. + * + * @author Daniele Alessandri + * + * @link http://redis.io/commands/lrange + */ +class ListKey implements \Iterator +{ + protected $client; + protected $count; + protected $key; + + protected $valid; + protected $fetchmore; + protected $elements; + protected $position; + protected $current; + + /** + * @param ClientInterface $client Client connected to Redis. + * @param string $key Redis list key. + * @param int $count Number of items retrieved on each fetch operation. + * + * @throws \InvalidArgumentException + */ + public function __construct(ClientInterface $client, $key, $count = 10) + { + $this->requiredCommand($client, 'LRANGE'); + + if ((false === $count = filter_var($count, FILTER_VALIDATE_INT)) || $count < 0) { + throw new \InvalidArgumentException('The $count argument must be a positive integer.'); + } + + $this->client = $client; + $this->key = $key; + $this->count = $count; + + $this->reset(); + } + + /** + * Ensures that the client instance supports the specified Redis command + * required to fetch elements from the server to perform the iteration. + * + * @param ClientInterface $client Client connected to Redis. + * @param string $commandID Command ID. + * + * @throws NotSupportedException + */ + protected function requiredCommand(ClientInterface $client, $commandID) + { + if (!$client->getProfile()->supportsCommand($commandID)) { + throw new NotSupportedException("The current profile does not support '$commandID'."); + } + } + + /** + * Resets the inner state of the iterator. + */ + protected function reset() + { + $this->valid = true; + $this->fetchmore = true; + $this->elements = array(); + $this->position = -1; + $this->current = null; + } + + /** + * Fetches a new set of elements from the remote collection, effectively + * advancing the iteration process. + * + * @return array + */ + protected function executeCommand() + { + return $this->client->lrange($this->key, $this->position + 1, $this->position + $this->count); + } + + /** + * Populates the local buffer of elements fetched from the server during the + * iteration. + */ + protected function fetch() + { + $elements = $this->executeCommand(); + + if (count($elements) < $this->count) { + $this->fetchmore = false; + } + + $this->elements = $elements; + } + + /** + * Extracts next values for key() and current(). + */ + protected function extractNext() + { + ++$this->position; + $this->current = array_shift($this->elements); + } + + /** + * {@inheritdoc} + */ + public function rewind() + { + $this->reset(); + $this->next(); + } + + /** + * {@inheritdoc} + */ + public function current() + { + return $this->current; + } + + /** + * {@inheritdoc} + */ + public function key() + { + return $this->position; + } + + /** + * {@inheritdoc} + */ + public function next() + { + if (!$this->elements && $this->fetchmore) { + $this->fetch(); + } + + if ($this->elements) { + $this->extractNext(); + } else { + $this->valid = false; + } + } + + /** + * {@inheritdoc} + */ + public function valid() + { + return $this->valid; + } +} diff --git a/vendor/predis/predis/src/Collection/Iterator/SetKey.php b/vendor/predis/predis/src/Collection/Iterator/SetKey.php new file mode 100644 index 00000000..8d2a8843 --- /dev/null +++ b/vendor/predis/predis/src/Collection/Iterator/SetKey.php @@ -0,0 +1,47 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Collection\Iterator; + +use Predis\ClientInterface; + +/** + * Abstracts the iteration of members stored in a set by leveraging the SSCAN + * command (Redis >= 2.8) wrapped in a fully-rewindable PHP iterator. + * + * @author Daniele Alessandri + * + * @link http://redis.io/commands/scan + */ +class SetKey extends CursorBasedIterator +{ + protected $key; + + /** + * {@inheritdoc} + */ + public function __construct(ClientInterface $client, $key, $match = null, $count = null) + { + $this->requiredCommand($client, 'SSCAN'); + + parent::__construct($client, $match, $count); + + $this->key = $key; + } + + /** + * {@inheritdoc} + */ + protected function executeCommand() + { + return $this->client->sscan($this->key, $this->cursor, $this->getScanOptions()); + } +} diff --git a/vendor/predis/predis/src/Collection/Iterator/SortedSetKey.php b/vendor/predis/predis/src/Collection/Iterator/SortedSetKey.php new file mode 100644 index 00000000..b348de9b --- /dev/null +++ b/vendor/predis/predis/src/Collection/Iterator/SortedSetKey.php @@ -0,0 +1,60 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Collection\Iterator; + +use Predis\ClientInterface; + +/** + * Abstracts the iteration of members stored in a sorted set by leveraging the + * ZSCAN command (Redis >= 2.8) wrapped in a fully-rewindable PHP iterator. + * + * @author Daniele Alessandri + * + * @link http://redis.io/commands/scan + */ +class SortedSetKey extends CursorBasedIterator +{ + protected $key; + + /** + * {@inheritdoc} + */ + public function __construct(ClientInterface $client, $key, $match = null, $count = null) + { + $this->requiredCommand($client, 'ZSCAN'); + + parent::__construct($client, $match, $count); + + $this->key = $key; + } + + /** + * {@inheritdoc} + */ + protected function executeCommand() + { + return $this->client->zscan($this->key, $this->cursor, $this->getScanOptions()); + } + + /** + * {@inheritdoc} + */ + protected function extractNext() + { + if ($kv = each($this->elements)) { + $this->position = $kv[0]; + $this->current = $kv[1]; + + unset($this->elements[$this->position]); + } + } +} diff --git a/vendor/predis/predis/src/Command/Command.php b/vendor/predis/predis/src/Command/Command.php new file mode 100644 index 00000000..f41632bb --- /dev/null +++ b/vendor/predis/predis/src/Command/Command.php @@ -0,0 +1,129 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * Base class for Redis commands. + * + * @author Daniele Alessandri + */ +abstract class Command implements CommandInterface +{ + private $slot; + private $arguments = array(); + + /** + * Returns a filtered array of the arguments. + * + * @param array $arguments List of arguments. + * + * @return array + */ + protected function filterArguments(array $arguments) + { + return $arguments; + } + + /** + * {@inheritdoc} + */ + public function setArguments(array $arguments) + { + $this->arguments = $this->filterArguments($arguments); + unset($this->slot); + } + + /** + * {@inheritdoc} + */ + public function setRawArguments(array $arguments) + { + $this->arguments = $arguments; + unset($this->slot); + } + + /** + * {@inheritdoc} + */ + public function getArguments() + { + return $this->arguments; + } + + /** + * {@inheritdoc} + */ + public function getArgument($index) + { + if (isset($this->arguments[$index])) { + return $this->arguments[$index]; + } + } + + /** + * {@inheritdoc} + */ + public function setSlot($slot) + { + $this->slot = $slot; + } + + /** + * {@inheritdoc} + */ + public function getSlot() + { + if (isset($this->slot)) { + return $this->slot; + } + } + + /** + * {@inheritdoc} + */ + public function parseResponse($data) + { + return $data; + } + + /** + * Normalizes the arguments array passed to a Redis command. + * + * @param array $arguments Arguments for a command. + * + * @return array + */ + public static function normalizeArguments(array $arguments) + { + if (count($arguments) === 1 && is_array($arguments[0])) { + return $arguments[0]; + } + + return $arguments; + } + + /** + * Normalizes the arguments array passed to a variadic Redis command. + * + * @param array $arguments Arguments for a command. + * + * @return array + */ + public static function normalizeVariadic(array $arguments) + { + if (count($arguments) === 2 && is_array($arguments[1])) { + return array_merge(array($arguments[0]), $arguments[1]); + } + + return $arguments; + } +} diff --git a/vendor/predis/predis/src/Command/CommandInterface.php b/vendor/predis/predis/src/Command/CommandInterface.php new file mode 100644 index 00000000..a5722360 --- /dev/null +++ b/vendor/predis/predis/src/Command/CommandInterface.php @@ -0,0 +1,81 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * Defines an abstraction representing a Redis command. + * + * @author Daniele Alessandri + */ +interface CommandInterface +{ + /** + * Returns the ID of the Redis command. By convention, command identifiers + * must always be uppercase. + * + * @return string + */ + public function getId(); + + /** + * Assign the specified slot to the command for clustering distribution. + * + * @param int $slot Slot ID. + */ + public function setSlot($slot); + + /** + * Returns the assigned slot of the command for clustering distribution. + * + * @return int|null + */ + public function getSlot(); + + /** + * Sets the arguments for the command. + * + * @param array $arguments List of arguments. + */ + public function setArguments(array $arguments); + + /** + * Sets the raw arguments for the command without processing them. + * + * @param array $arguments List of arguments. + */ + public function setRawArguments(array $arguments); + + /** + * Gets the arguments of the command. + * + * @return array + */ + public function getArguments(); + + /** + * Gets the argument of the command at the specified index. + * + * @param int $index Index of the desired argument. + * + * @return mixed|null + */ + public function getArgument($index); + + /** + * Parses a raw response and returns a PHP object. + * + * @param string $data Binary string containing the whole response. + * + * @return mixed + */ + public function parseResponse($data); +} diff --git a/vendor/predis/predis/src/Command/ConnectionAuth.php b/vendor/predis/predis/src/Command/ConnectionAuth.php new file mode 100644 index 00000000..3c215699 --- /dev/null +++ b/vendor/predis/predis/src/Command/ConnectionAuth.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/auth + * + * @author Daniele Alessandri + */ +class ConnectionAuth extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'AUTH'; + } +} diff --git a/vendor/predis/predis/src/Command/ConnectionEcho.php b/vendor/predis/predis/src/Command/ConnectionEcho.php new file mode 100644 index 00000000..c2fcb1b6 --- /dev/null +++ b/vendor/predis/predis/src/Command/ConnectionEcho.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/echo + * + * @author Daniele Alessandri + */ +class ConnectionEcho extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'ECHO'; + } +} diff --git a/vendor/predis/predis/src/Command/ConnectionPing.php b/vendor/predis/predis/src/Command/ConnectionPing.php new file mode 100644 index 00000000..e307de41 --- /dev/null +++ b/vendor/predis/predis/src/Command/ConnectionPing.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/ping + * + * @author Daniele Alessandri + */ +class ConnectionPing extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'PING'; + } +} diff --git a/vendor/predis/predis/src/Command/ConnectionQuit.php b/vendor/predis/predis/src/Command/ConnectionQuit.php new file mode 100644 index 00000000..6ade7d89 --- /dev/null +++ b/vendor/predis/predis/src/Command/ConnectionQuit.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/quit + * + * @author Daniele Alessandri + */ +class ConnectionQuit extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'QUIT'; + } +} diff --git a/vendor/predis/predis/src/Command/ConnectionSelect.php b/vendor/predis/predis/src/Command/ConnectionSelect.php new file mode 100644 index 00000000..cf1d8598 --- /dev/null +++ b/vendor/predis/predis/src/Command/ConnectionSelect.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/select + * + * @author Daniele Alessandri + */ +class ConnectionSelect extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'SELECT'; + } +} diff --git a/vendor/predis/predis/src/Command/GeospatialGeoAdd.php b/vendor/predis/predis/src/Command/GeospatialGeoAdd.php new file mode 100644 index 00000000..6dbff113 --- /dev/null +++ b/vendor/predis/predis/src/Command/GeospatialGeoAdd.php @@ -0,0 +1,42 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/geoadd + * + * @author Daniele Alessandri + */ +class GeospatialGeoAdd extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'GEOADD'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + if (count($arguments) === 2 && is_array($arguments[1])) { + foreach (array_pop($arguments) as $item) { + $arguments = array_merge($arguments, $item); + } + } + + return $arguments; + } +} diff --git a/vendor/predis/predis/src/Command/GeospatialGeoDist.php b/vendor/predis/predis/src/Command/GeospatialGeoDist.php new file mode 100644 index 00000000..d68e4e86 --- /dev/null +++ b/vendor/predis/predis/src/Command/GeospatialGeoDist.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/geodist + * + * @author Daniele Alessandri + */ +class GeospatialGeoDist extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'GEODIST'; + } +} diff --git a/vendor/predis/predis/src/Command/GeospatialGeoHash.php b/vendor/predis/predis/src/Command/GeospatialGeoHash.php new file mode 100644 index 00000000..bd2ebde8 --- /dev/null +++ b/vendor/predis/predis/src/Command/GeospatialGeoHash.php @@ -0,0 +1,41 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/geohash + * + * @author Daniele Alessandri + */ +class GeospatialGeoHash extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'GEOHASH'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + if (count($arguments) === 2 && is_array($arguments[1])) { + $members = array_pop($arguments); + $arguments = array_merge($arguments, $members); + } + + return $arguments; + } +} diff --git a/vendor/predis/predis/src/Command/GeospatialGeoPos.php b/vendor/predis/predis/src/Command/GeospatialGeoPos.php new file mode 100644 index 00000000..fa8e726f --- /dev/null +++ b/vendor/predis/predis/src/Command/GeospatialGeoPos.php @@ -0,0 +1,41 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/geopos + * + * @author Daniele Alessandri + */ +class GeospatialGeoPos extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'GEOPOS'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + if (count($arguments) === 2 && is_array($arguments[1])) { + $members = array_pop($arguments); + $arguments = array_merge($arguments, $members); + } + + return $arguments; + } +} diff --git a/vendor/predis/predis/src/Command/GeospatialGeoRadius.php b/vendor/predis/predis/src/Command/GeospatialGeoRadius.php new file mode 100644 index 00000000..2745d226 --- /dev/null +++ b/vendor/predis/predis/src/Command/GeospatialGeoRadius.php @@ -0,0 +1,71 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/georadius + * + * @author Daniele Alessandri + */ +class GeospatialGeoRadius extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'GEORADIUS'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + if ($arguments && is_array(end($arguments))) { + $options = array_change_key_case(array_pop($arguments), CASE_UPPER); + + if (isset($options['WITHCOORD']) && $options['WITHCOORD'] == true) { + $arguments[] = 'WITHCOORD'; + } + + if (isset($options['WITHDIST']) && $options['WITHDIST'] == true) { + $arguments[] = 'WITHDIST'; + } + + if (isset($options['WITHHASH']) && $options['WITHHASH'] == true) { + $arguments[] = 'WITHHASH'; + } + + if (isset($options['COUNT'])) { + $arguments[] = 'COUNT'; + $arguments[] = $options['COUNT']; + } + + if (isset($options['SORT'])) { + $arguments[] = strtoupper($options['SORT']); + } + + if (isset($options['STORE'])) { + $arguments[] = 'STORE'; + $arguments[] = $options['STORE']; + } + + if (isset($options['STOREDIST'])) { + $arguments[] = 'STOREDIST'; + $arguments[] = $options['STOREDIST']; + } + } + + return $arguments; + } +} diff --git a/vendor/predis/predis/src/Command/GeospatialGeoRadiusByMember.php b/vendor/predis/predis/src/Command/GeospatialGeoRadiusByMember.php new file mode 100644 index 00000000..b5aae359 --- /dev/null +++ b/vendor/predis/predis/src/Command/GeospatialGeoRadiusByMember.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/georadiusbymember + * + * @author Daniele Alessandri + */ +class GeospatialGeoRadiusByMember extends GeospatialGeoRadius +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'GEORADIUSBYMEMBER'; + } +} diff --git a/vendor/predis/predis/src/Command/HashDelete.php b/vendor/predis/predis/src/Command/HashDelete.php new file mode 100644 index 00000000..71359645 --- /dev/null +++ b/vendor/predis/predis/src/Command/HashDelete.php @@ -0,0 +1,36 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/hdel + * + * @author Daniele Alessandri + */ +class HashDelete extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'HDEL'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + return self::normalizeVariadic($arguments); + } +} diff --git a/vendor/predis/predis/src/Command/HashExists.php b/vendor/predis/predis/src/Command/HashExists.php new file mode 100644 index 00000000..a26ed439 --- /dev/null +++ b/vendor/predis/predis/src/Command/HashExists.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/hexists + * + * @author Daniele Alessandri + */ +class HashExists extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'HEXISTS'; + } +} diff --git a/vendor/predis/predis/src/Command/HashGet.php b/vendor/predis/predis/src/Command/HashGet.php new file mode 100644 index 00000000..ce640898 --- /dev/null +++ b/vendor/predis/predis/src/Command/HashGet.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/hget + * + * @author Daniele Alessandri + */ +class HashGet extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'HGET'; + } +} diff --git a/vendor/predis/predis/src/Command/HashGetAll.php b/vendor/predis/predis/src/Command/HashGetAll.php new file mode 100644 index 00000000..c95b7acb --- /dev/null +++ b/vendor/predis/predis/src/Command/HashGetAll.php @@ -0,0 +1,42 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/hgetall + * + * @author Daniele Alessandri + */ +class HashGetAll extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'HGETALL'; + } + + /** + * {@inheritdoc} + */ + public function parseResponse($data) + { + $result = array(); + + for ($i = 0; $i < count($data); ++$i) { + $result[$data[$i]] = $data[++$i]; + } + + return $result; + } +} diff --git a/vendor/predis/predis/src/Command/HashGetMultiple.php b/vendor/predis/predis/src/Command/HashGetMultiple.php new file mode 100644 index 00000000..1f1f265e --- /dev/null +++ b/vendor/predis/predis/src/Command/HashGetMultiple.php @@ -0,0 +1,36 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/hmget + * + * @author Daniele Alessandri + */ +class HashGetMultiple extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'HMGET'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + return self::normalizeVariadic($arguments); + } +} diff --git a/vendor/predis/predis/src/Command/HashIncrementBy.php b/vendor/predis/predis/src/Command/HashIncrementBy.php new file mode 100644 index 00000000..2c6bc423 --- /dev/null +++ b/vendor/predis/predis/src/Command/HashIncrementBy.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/hincrby + * + * @author Daniele Alessandri + */ +class HashIncrementBy extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'HINCRBY'; + } +} diff --git a/vendor/predis/predis/src/Command/HashIncrementByFloat.php b/vendor/predis/predis/src/Command/HashIncrementByFloat.php new file mode 100644 index 00000000..3d20df7e --- /dev/null +++ b/vendor/predis/predis/src/Command/HashIncrementByFloat.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/hincrbyfloat + * + * @author Daniele Alessandri + */ +class HashIncrementByFloat extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'HINCRBYFLOAT'; + } +} diff --git a/vendor/predis/predis/src/Command/HashKeys.php b/vendor/predis/predis/src/Command/HashKeys.php new file mode 100644 index 00000000..48db03c8 --- /dev/null +++ b/vendor/predis/predis/src/Command/HashKeys.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/hkeys + * + * @author Daniele Alessandri + */ +class HashKeys extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'HKEYS'; + } +} diff --git a/vendor/predis/predis/src/Command/HashLength.php b/vendor/predis/predis/src/Command/HashLength.php new file mode 100644 index 00000000..9e9f4812 --- /dev/null +++ b/vendor/predis/predis/src/Command/HashLength.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/hlen + * + * @author Daniele Alessandri + */ +class HashLength extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'HLEN'; + } +} diff --git a/vendor/predis/predis/src/Command/HashScan.php b/vendor/predis/predis/src/Command/HashScan.php new file mode 100644 index 00000000..61b4ba6c --- /dev/null +++ b/vendor/predis/predis/src/Command/HashScan.php @@ -0,0 +1,85 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/hscan + * + * @author Daniele Alessandri + */ +class HashScan extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'HSCAN'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + if (count($arguments) === 3 && is_array($arguments[2])) { + $options = $this->prepareOptions(array_pop($arguments)); + $arguments = array_merge($arguments, $options); + } + + return $arguments; + } + + /** + * Returns a list of options and modifiers compatible with Redis. + * + * @param array $options List of options. + * + * @return array + */ + protected function prepareOptions($options) + { + $options = array_change_key_case($options, CASE_UPPER); + $normalized = array(); + + if (!empty($options['MATCH'])) { + $normalized[] = 'MATCH'; + $normalized[] = $options['MATCH']; + } + + if (!empty($options['COUNT'])) { + $normalized[] = 'COUNT'; + $normalized[] = $options['COUNT']; + } + + return $normalized; + } + + /** + * {@inheritdoc} + */ + public function parseResponse($data) + { + if (is_array($data)) { + $fields = $data[1]; + $result = array(); + + for ($i = 0; $i < count($fields); ++$i) { + $result[$fields[$i]] = $fields[++$i]; + } + + $data[1] = $result; + } + + return $data; + } +} diff --git a/vendor/predis/predis/src/Command/HashSet.php b/vendor/predis/predis/src/Command/HashSet.php new file mode 100644 index 00000000..8bc715af --- /dev/null +++ b/vendor/predis/predis/src/Command/HashSet.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/hset + * + * @author Daniele Alessandri + */ +class HashSet extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'HSET'; + } +} diff --git a/vendor/predis/predis/src/Command/HashSetMultiple.php b/vendor/predis/predis/src/Command/HashSetMultiple.php new file mode 100644 index 00000000..478e88b2 --- /dev/null +++ b/vendor/predis/predis/src/Command/HashSetMultiple.php @@ -0,0 +1,48 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/hmset + * + * @author Daniele Alessandri + */ +class HashSetMultiple extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'HMSET'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + if (count($arguments) === 2 && is_array($arguments[1])) { + $flattenedKVs = array($arguments[0]); + $args = $arguments[1]; + + foreach ($args as $k => $v) { + $flattenedKVs[] = $k; + $flattenedKVs[] = $v; + } + + return $flattenedKVs; + } + + return $arguments; + } +} diff --git a/vendor/predis/predis/src/Command/HashSetPreserve.php b/vendor/predis/predis/src/Command/HashSetPreserve.php new file mode 100644 index 00000000..70668fc9 --- /dev/null +++ b/vendor/predis/predis/src/Command/HashSetPreserve.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/hsetnx + * + * @author Daniele Alessandri + */ +class HashSetPreserve extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'HSETNX'; + } +} diff --git a/vendor/predis/predis/src/Command/HashStringLength.php b/vendor/predis/predis/src/Command/HashStringLength.php new file mode 100644 index 00000000..cba2c830 --- /dev/null +++ b/vendor/predis/predis/src/Command/HashStringLength.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/hstrlen + * + * @author Daniele Alessandri + */ +class HashStringLength extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'HSTRLEN'; + } +} diff --git a/vendor/predis/predis/src/Command/HashValues.php b/vendor/predis/predis/src/Command/HashValues.php new file mode 100644 index 00000000..2075fd93 --- /dev/null +++ b/vendor/predis/predis/src/Command/HashValues.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/hvals + * + * @author Daniele Alessandri + */ +class HashValues extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'HVALS'; + } +} diff --git a/vendor/predis/predis/src/Command/HyperLogLogAdd.php b/vendor/predis/predis/src/Command/HyperLogLogAdd.php new file mode 100644 index 00000000..8d0605bf --- /dev/null +++ b/vendor/predis/predis/src/Command/HyperLogLogAdd.php @@ -0,0 +1,36 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/pfadd + * + * @author Daniele Alessandri + */ +class HyperLogLogAdd extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'PFADD'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + return self::normalizeVariadic($arguments); + } +} diff --git a/vendor/predis/predis/src/Command/HyperLogLogCount.php b/vendor/predis/predis/src/Command/HyperLogLogCount.php new file mode 100644 index 00000000..da33b339 --- /dev/null +++ b/vendor/predis/predis/src/Command/HyperLogLogCount.php @@ -0,0 +1,36 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/pfcount + * + * @author Daniele Alessandri + */ +class HyperLogLogCount extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'PFCOUNT'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + return self::normalizeArguments($arguments); + } +} diff --git a/vendor/predis/predis/src/Command/HyperLogLogMerge.php b/vendor/predis/predis/src/Command/HyperLogLogMerge.php new file mode 100644 index 00000000..09b4bde3 --- /dev/null +++ b/vendor/predis/predis/src/Command/HyperLogLogMerge.php @@ -0,0 +1,36 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/pfmerge + * + * @author Daniele Alessandri + */ +class HyperLogLogMerge extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'PFMERGE'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + return self::normalizeArguments($arguments); + } +} diff --git a/vendor/predis/predis/src/Command/KeyDelete.php b/vendor/predis/predis/src/Command/KeyDelete.php new file mode 100644 index 00000000..e7bfa0b3 --- /dev/null +++ b/vendor/predis/predis/src/Command/KeyDelete.php @@ -0,0 +1,36 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/del + * + * @author Daniele Alessandri + */ +class KeyDelete extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'DEL'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + return self::normalizeArguments($arguments); + } +} diff --git a/vendor/predis/predis/src/Command/KeyDump.php b/vendor/predis/predis/src/Command/KeyDump.php new file mode 100644 index 00000000..e0a11bd4 --- /dev/null +++ b/vendor/predis/predis/src/Command/KeyDump.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/dump + * + * @author Daniele Alessandri + */ +class KeyDump extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'DUMP'; + } +} diff --git a/vendor/predis/predis/src/Command/KeyExists.php b/vendor/predis/predis/src/Command/KeyExists.php new file mode 100644 index 00000000..fc5aef07 --- /dev/null +++ b/vendor/predis/predis/src/Command/KeyExists.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/exists + * + * @author Daniele Alessandri + */ +class KeyExists extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'EXISTS'; + } +} diff --git a/vendor/predis/predis/src/Command/KeyExpire.php b/vendor/predis/predis/src/Command/KeyExpire.php new file mode 100644 index 00000000..264554d7 --- /dev/null +++ b/vendor/predis/predis/src/Command/KeyExpire.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/expire + * + * @author Daniele Alessandri + */ +class KeyExpire extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'EXPIRE'; + } +} diff --git a/vendor/predis/predis/src/Command/KeyExpireAt.php b/vendor/predis/predis/src/Command/KeyExpireAt.php new file mode 100644 index 00000000..dad77854 --- /dev/null +++ b/vendor/predis/predis/src/Command/KeyExpireAt.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/expireat + * + * @author Daniele Alessandri + */ +class KeyExpireAt extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'EXPIREAT'; + } +} diff --git a/vendor/predis/predis/src/Command/KeyKeys.php b/vendor/predis/predis/src/Command/KeyKeys.php new file mode 100644 index 00000000..1b739a16 --- /dev/null +++ b/vendor/predis/predis/src/Command/KeyKeys.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/keys + * + * @author Daniele Alessandri + */ +class KeyKeys extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'KEYS'; + } +} diff --git a/vendor/predis/predis/src/Command/KeyMigrate.php b/vendor/predis/predis/src/Command/KeyMigrate.php new file mode 100644 index 00000000..63648db8 --- /dev/null +++ b/vendor/predis/predis/src/Command/KeyMigrate.php @@ -0,0 +1,50 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/migrate + * + * @author Daniele Alessandri + */ +class KeyMigrate extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'MIGRATE'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + if (is_array(end($arguments))) { + foreach (array_pop($arguments) as $modifier => $value) { + $modifier = strtoupper($modifier); + + if ($modifier === 'COPY' && $value == true) { + $arguments[] = $modifier; + } + + if ($modifier === 'REPLACE' && $value == true) { + $arguments[] = $modifier; + } + } + } + + return $arguments; + } +} diff --git a/vendor/predis/predis/src/Command/KeyMove.php b/vendor/predis/predis/src/Command/KeyMove.php new file mode 100644 index 00000000..52df9c3f --- /dev/null +++ b/vendor/predis/predis/src/Command/KeyMove.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/move + * + * @author Daniele Alessandri + */ +class KeyMove extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'MOVE'; + } +} diff --git a/vendor/predis/predis/src/Command/KeyPersist.php b/vendor/predis/predis/src/Command/KeyPersist.php new file mode 100644 index 00000000..c68e85dc --- /dev/null +++ b/vendor/predis/predis/src/Command/KeyPersist.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/persist + * + * @author Daniele Alessandri + */ +class KeyPersist extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'PERSIST'; + } +} diff --git a/vendor/predis/predis/src/Command/KeyPreciseExpire.php b/vendor/predis/predis/src/Command/KeyPreciseExpire.php new file mode 100644 index 00000000..9b8745cd --- /dev/null +++ b/vendor/predis/predis/src/Command/KeyPreciseExpire.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/pexpire + * + * @author Daniele Alessandri + */ +class KeyPreciseExpire extends KeyExpire +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'PEXPIRE'; + } +} diff --git a/vendor/predis/predis/src/Command/KeyPreciseExpireAt.php b/vendor/predis/predis/src/Command/KeyPreciseExpireAt.php new file mode 100644 index 00000000..2881adbe --- /dev/null +++ b/vendor/predis/predis/src/Command/KeyPreciseExpireAt.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/pexpireat + * + * @author Daniele Alessandri + */ +class KeyPreciseExpireAt extends KeyExpireAt +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'PEXPIREAT'; + } +} diff --git a/vendor/predis/predis/src/Command/KeyPreciseTimeToLive.php b/vendor/predis/predis/src/Command/KeyPreciseTimeToLive.php new file mode 100644 index 00000000..7cbdfff1 --- /dev/null +++ b/vendor/predis/predis/src/Command/KeyPreciseTimeToLive.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/pttl + * + * @author Daniele Alessandri + */ +class KeyPreciseTimeToLive extends KeyTimeToLive +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'PTTL'; + } +} diff --git a/vendor/predis/predis/src/Command/KeyRandom.php b/vendor/predis/predis/src/Command/KeyRandom.php new file mode 100644 index 00000000..b39d528c --- /dev/null +++ b/vendor/predis/predis/src/Command/KeyRandom.php @@ -0,0 +1,36 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/randomkey + * + * @author Daniele Alessandri + */ +class KeyRandom extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'RANDOMKEY'; + } + + /** + * {@inheritdoc} + */ + public function parseResponse($data) + { + return $data !== '' ? $data : null; + } +} diff --git a/vendor/predis/predis/src/Command/KeyRename.php b/vendor/predis/predis/src/Command/KeyRename.php new file mode 100644 index 00000000..81858cd3 --- /dev/null +++ b/vendor/predis/predis/src/Command/KeyRename.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/rename + * + * @author Daniele Alessandri + */ +class KeyRename extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'RENAME'; + } +} diff --git a/vendor/predis/predis/src/Command/KeyRenamePreserve.php b/vendor/predis/predis/src/Command/KeyRenamePreserve.php new file mode 100644 index 00000000..b310fe92 --- /dev/null +++ b/vendor/predis/predis/src/Command/KeyRenamePreserve.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/renamenx + * + * @author Daniele Alessandri + */ +class KeyRenamePreserve extends KeyRename +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'RENAMENX'; + } +} diff --git a/vendor/predis/predis/src/Command/KeyRestore.php b/vendor/predis/predis/src/Command/KeyRestore.php new file mode 100644 index 00000000..45d22e6e --- /dev/null +++ b/vendor/predis/predis/src/Command/KeyRestore.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/restore + * + * @author Daniele Alessandri + */ +class KeyRestore extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'RESTORE'; + } +} diff --git a/vendor/predis/predis/src/Command/KeyScan.php b/vendor/predis/predis/src/Command/KeyScan.php new file mode 100644 index 00000000..4a19f19a --- /dev/null +++ b/vendor/predis/predis/src/Command/KeyScan.php @@ -0,0 +1,66 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/scan + * + * @author Daniele Alessandri + */ +class KeyScan extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'SCAN'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + if (count($arguments) === 2 && is_array($arguments[1])) { + $options = $this->prepareOptions(array_pop($arguments)); + $arguments = array_merge($arguments, $options); + } + + return $arguments; + } + + /** + * Returns a list of options and modifiers compatible with Redis. + * + * @param array $options List of options. + * + * @return array + */ + protected function prepareOptions($options) + { + $options = array_change_key_case($options, CASE_UPPER); + $normalized = array(); + + if (!empty($options['MATCH'])) { + $normalized[] = 'MATCH'; + $normalized[] = $options['MATCH']; + } + + if (!empty($options['COUNT'])) { + $normalized[] = 'COUNT'; + $normalized[] = $options['COUNT']; + } + + return $normalized; + } +} diff --git a/vendor/predis/predis/src/Command/KeySort.php b/vendor/predis/predis/src/Command/KeySort.php new file mode 100644 index 00000000..e7844d73 --- /dev/null +++ b/vendor/predis/predis/src/Command/KeySort.php @@ -0,0 +1,83 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/sort + * + * @author Daniele Alessandri + */ +class KeySort extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'SORT'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + if (count($arguments) === 1) { + return $arguments; + } + + $query = array($arguments[0]); + $sortParams = array_change_key_case($arguments[1], CASE_UPPER); + + if (isset($sortParams['BY'])) { + $query[] = 'BY'; + $query[] = $sortParams['BY']; + } + + if (isset($sortParams['GET'])) { + $getargs = $sortParams['GET']; + + if (is_array($getargs)) { + foreach ($getargs as $getarg) { + $query[] = 'GET'; + $query[] = $getarg; + } + } else { + $query[] = 'GET'; + $query[] = $getargs; + } + } + + if (isset($sortParams['LIMIT']) && + is_array($sortParams['LIMIT']) && + count($sortParams['LIMIT']) == 2) { + $query[] = 'LIMIT'; + $query[] = $sortParams['LIMIT'][0]; + $query[] = $sortParams['LIMIT'][1]; + } + + if (isset($sortParams['SORT'])) { + $query[] = strtoupper($sortParams['SORT']); + } + + if (isset($sortParams['ALPHA']) && $sortParams['ALPHA'] == true) { + $query[] = 'ALPHA'; + } + + if (isset($sortParams['STORE'])) { + $query[] = 'STORE'; + $query[] = $sortParams['STORE']; + } + + return $query; + } +} diff --git a/vendor/predis/predis/src/Command/KeyTimeToLive.php b/vendor/predis/predis/src/Command/KeyTimeToLive.php new file mode 100644 index 00000000..af97503f --- /dev/null +++ b/vendor/predis/predis/src/Command/KeyTimeToLive.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/ttl + * + * @author Daniele Alessandri + */ +class KeyTimeToLive extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'TTL'; + } +} diff --git a/vendor/predis/predis/src/Command/KeyType.php b/vendor/predis/predis/src/Command/KeyType.php new file mode 100644 index 00000000..3180bbc8 --- /dev/null +++ b/vendor/predis/predis/src/Command/KeyType.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/type + * + * @author Daniele Alessandri + */ +class KeyType extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'TYPE'; + } +} diff --git a/vendor/predis/predis/src/Command/ListIndex.php b/vendor/predis/predis/src/Command/ListIndex.php new file mode 100644 index 00000000..110c19a5 --- /dev/null +++ b/vendor/predis/predis/src/Command/ListIndex.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/lindex + * + * @author Daniele Alessandri + */ +class ListIndex extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'LINDEX'; + } +} diff --git a/vendor/predis/predis/src/Command/ListInsert.php b/vendor/predis/predis/src/Command/ListInsert.php new file mode 100644 index 00000000..58c5cb6a --- /dev/null +++ b/vendor/predis/predis/src/Command/ListInsert.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/linsert + * + * @author Daniele Alessandri + */ +class ListInsert extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'LINSERT'; + } +} diff --git a/vendor/predis/predis/src/Command/ListLength.php b/vendor/predis/predis/src/Command/ListLength.php new file mode 100644 index 00000000..54d57645 --- /dev/null +++ b/vendor/predis/predis/src/Command/ListLength.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/llen + * + * @author Daniele Alessandri + */ +class ListLength extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'LLEN'; + } +} diff --git a/vendor/predis/predis/src/Command/ListPopFirst.php b/vendor/predis/predis/src/Command/ListPopFirst.php new file mode 100644 index 00000000..807731ac --- /dev/null +++ b/vendor/predis/predis/src/Command/ListPopFirst.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/lpop + * + * @author Daniele Alessandri + */ +class ListPopFirst extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'LPOP'; + } +} diff --git a/vendor/predis/predis/src/Command/ListPopFirstBlocking.php b/vendor/predis/predis/src/Command/ListPopFirstBlocking.php new file mode 100644 index 00000000..f39ef9f9 --- /dev/null +++ b/vendor/predis/predis/src/Command/ListPopFirstBlocking.php @@ -0,0 +1,41 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/blpop + * + * @author Daniele Alessandri + */ +class ListPopFirstBlocking extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'BLPOP'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + if (count($arguments) === 2 && is_array($arguments[0])) { + list($arguments, $timeout) = $arguments; + array_push($arguments, $timeout); + } + + return $arguments; + } +} diff --git a/vendor/predis/predis/src/Command/ListPopLast.php b/vendor/predis/predis/src/Command/ListPopLast.php new file mode 100644 index 00000000..3c205a49 --- /dev/null +++ b/vendor/predis/predis/src/Command/ListPopLast.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/rpop + * + * @author Daniele Alessandri + */ +class ListPopLast extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'RPOP'; + } +} diff --git a/vendor/predis/predis/src/Command/ListPopLastBlocking.php b/vendor/predis/predis/src/Command/ListPopLastBlocking.php new file mode 100644 index 00000000..12e41ebd --- /dev/null +++ b/vendor/predis/predis/src/Command/ListPopLastBlocking.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/brpop + * + * @author Daniele Alessandri + */ +class ListPopLastBlocking extends ListPopFirstBlocking +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'BRPOP'; + } +} diff --git a/vendor/predis/predis/src/Command/ListPopLastPushHead.php b/vendor/predis/predis/src/Command/ListPopLastPushHead.php new file mode 100644 index 00000000..efb7c90d --- /dev/null +++ b/vendor/predis/predis/src/Command/ListPopLastPushHead.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/rpoplpush + * + * @author Daniele Alessandri + */ +class ListPopLastPushHead extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'RPOPLPUSH'; + } +} diff --git a/vendor/predis/predis/src/Command/ListPopLastPushHeadBlocking.php b/vendor/predis/predis/src/Command/ListPopLastPushHeadBlocking.php new file mode 100644 index 00000000..9e6f8aa0 --- /dev/null +++ b/vendor/predis/predis/src/Command/ListPopLastPushHeadBlocking.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/brpoplpush + * + * @author Daniele Alessandri + */ +class ListPopLastPushHeadBlocking extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'BRPOPLPUSH'; + } +} diff --git a/vendor/predis/predis/src/Command/ListPushHead.php b/vendor/predis/predis/src/Command/ListPushHead.php new file mode 100644 index 00000000..1e27d646 --- /dev/null +++ b/vendor/predis/predis/src/Command/ListPushHead.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/lpush + * + * @author Daniele Alessandri + */ +class ListPushHead extends ListPushTail +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'LPUSH'; + } +} diff --git a/vendor/predis/predis/src/Command/ListPushHeadX.php b/vendor/predis/predis/src/Command/ListPushHeadX.php new file mode 100644 index 00000000..9a4b9a1d --- /dev/null +++ b/vendor/predis/predis/src/Command/ListPushHeadX.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/lpushx + * + * @author Daniele Alessandri + */ +class ListPushHeadX extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'LPUSHX'; + } +} diff --git a/vendor/predis/predis/src/Command/ListPushTail.php b/vendor/predis/predis/src/Command/ListPushTail.php new file mode 100644 index 00000000..d637b338 --- /dev/null +++ b/vendor/predis/predis/src/Command/ListPushTail.php @@ -0,0 +1,36 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/rpush + * + * @author Daniele Alessandri + */ +class ListPushTail extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'RPUSH'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + return self::normalizeVariadic($arguments); + } +} diff --git a/vendor/predis/predis/src/Command/ListPushTailX.php b/vendor/predis/predis/src/Command/ListPushTailX.php new file mode 100644 index 00000000..f4488c92 --- /dev/null +++ b/vendor/predis/predis/src/Command/ListPushTailX.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/rpushx + * + * @author Daniele Alessandri + */ +class ListPushTailX extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'RPUSHX'; + } +} diff --git a/vendor/predis/predis/src/Command/ListRange.php b/vendor/predis/predis/src/Command/ListRange.php new file mode 100644 index 00000000..7f9f4c14 --- /dev/null +++ b/vendor/predis/predis/src/Command/ListRange.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/lrange + * + * @author Daniele Alessandri + */ +class ListRange extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'LRANGE'; + } +} diff --git a/vendor/predis/predis/src/Command/ListRemove.php b/vendor/predis/predis/src/Command/ListRemove.php new file mode 100644 index 00000000..dac7d3da --- /dev/null +++ b/vendor/predis/predis/src/Command/ListRemove.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/lrem + * + * @author Daniele Alessandri + */ +class ListRemove extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'LREM'; + } +} diff --git a/vendor/predis/predis/src/Command/ListSet.php b/vendor/predis/predis/src/Command/ListSet.php new file mode 100644 index 00000000..74ff8b2b --- /dev/null +++ b/vendor/predis/predis/src/Command/ListSet.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/lset + * + * @author Daniele Alessandri + */ +class ListSet extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'LSET'; + } +} diff --git a/vendor/predis/predis/src/Command/ListTrim.php b/vendor/predis/predis/src/Command/ListTrim.php new file mode 100644 index 00000000..c0f006e3 --- /dev/null +++ b/vendor/predis/predis/src/Command/ListTrim.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/ltrim + * + * @author Daniele Alessandri + */ +class ListTrim extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'LTRIM'; + } +} diff --git a/vendor/predis/predis/src/Command/PrefixableCommandInterface.php b/vendor/predis/predis/src/Command/PrefixableCommandInterface.php new file mode 100644 index 00000000..b0ffddc5 --- /dev/null +++ b/vendor/predis/predis/src/Command/PrefixableCommandInterface.php @@ -0,0 +1,27 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * Defines a command whose keys can be prefixed. + * + * @author Daniele Alessandri + */ +interface PrefixableCommandInterface extends CommandInterface +{ + /** + * Prefixes all the keys found in the arguments of the command. + * + * @param string $prefix String used to prefix the keys. + */ + public function prefixKeys($prefix); +} diff --git a/vendor/predis/predis/src/Command/Processor/KeyPrefixProcessor.php b/vendor/predis/predis/src/Command/Processor/KeyPrefixProcessor.php new file mode 100644 index 00000000..70fa7929 --- /dev/null +++ b/vendor/predis/predis/src/Command/Processor/KeyPrefixProcessor.php @@ -0,0 +1,450 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command\Processor; + +use Predis\Command\CommandInterface; +use Predis\Command\PrefixableCommandInterface; + +/** + * Command processor capable of prefixing keys stored in the arguments of Redis + * commands supported. + * + * @author Daniele Alessandri + */ +class KeyPrefixProcessor implements ProcessorInterface +{ + private $prefix; + private $commands; + + /** + * @param string $prefix Prefix for the keys. + */ + public function __construct($prefix) + { + $this->prefix = $prefix; + $this->commands = array( + /* ---------------- Redis 1.2 ---------------- */ + 'EXISTS' => 'static::all', + 'DEL' => 'static::all', + 'TYPE' => 'static::first', + 'KEYS' => 'static::first', + 'RENAME' => 'static::all', + 'RENAMENX' => 'static::all', + 'EXPIRE' => 'static::first', + 'EXPIREAT' => 'static::first', + 'TTL' => 'static::first', + 'MOVE' => 'static::first', + 'SORT' => 'static::sort', + 'DUMP' => 'static::first', + 'RESTORE' => 'static::first', + 'SET' => 'static::first', + 'SETNX' => 'static::first', + 'MSET' => 'static::interleaved', + 'MSETNX' => 'static::interleaved', + 'GET' => 'static::first', + 'MGET' => 'static::all', + 'GETSET' => 'static::first', + 'INCR' => 'static::first', + 'INCRBY' => 'static::first', + 'DECR' => 'static::first', + 'DECRBY' => 'static::first', + 'RPUSH' => 'static::first', + 'LPUSH' => 'static::first', + 'LLEN' => 'static::first', + 'LRANGE' => 'static::first', + 'LTRIM' => 'static::first', + 'LINDEX' => 'static::first', + 'LSET' => 'static::first', + 'LREM' => 'static::first', + 'LPOP' => 'static::first', + 'RPOP' => 'static::first', + 'RPOPLPUSH' => 'static::all', + 'SADD' => 'static::first', + 'SREM' => 'static::first', + 'SPOP' => 'static::first', + 'SMOVE' => 'static::skipLast', + 'SCARD' => 'static::first', + 'SISMEMBER' => 'static::first', + 'SINTER' => 'static::all', + 'SINTERSTORE' => 'static::all', + 'SUNION' => 'static::all', + 'SUNIONSTORE' => 'static::all', + 'SDIFF' => 'static::all', + 'SDIFFSTORE' => 'static::all', + 'SMEMBERS' => 'static::first', + 'SRANDMEMBER' => 'static::first', + 'ZADD' => 'static::first', + 'ZINCRBY' => 'static::first', + 'ZREM' => 'static::first', + 'ZRANGE' => 'static::first', + 'ZREVRANGE' => 'static::first', + 'ZRANGEBYSCORE' => 'static::first', + 'ZCARD' => 'static::first', + 'ZSCORE' => 'static::first', + 'ZREMRANGEBYSCORE' => 'static::first', + /* ---------------- Redis 2.0 ---------------- */ + 'SETEX' => 'static::first', + 'APPEND' => 'static::first', + 'SUBSTR' => 'static::first', + 'BLPOP' => 'static::skipLast', + 'BRPOP' => 'static::skipLast', + 'ZUNIONSTORE' => 'static::zsetStore', + 'ZINTERSTORE' => 'static::zsetStore', + 'ZCOUNT' => 'static::first', + 'ZRANK' => 'static::first', + 'ZREVRANK' => 'static::first', + 'ZREMRANGEBYRANK' => 'static::first', + 'HSET' => 'static::first', + 'HSETNX' => 'static::first', + 'HMSET' => 'static::first', + 'HINCRBY' => 'static::first', + 'HGET' => 'static::first', + 'HMGET' => 'static::first', + 'HDEL' => 'static::first', + 'HEXISTS' => 'static::first', + 'HLEN' => 'static::first', + 'HKEYS' => 'static::first', + 'HVALS' => 'static::first', + 'HGETALL' => 'static::first', + 'SUBSCRIBE' => 'static::all', + 'UNSUBSCRIBE' => 'static::all', + 'PSUBSCRIBE' => 'static::all', + 'PUNSUBSCRIBE' => 'static::all', + 'PUBLISH' => 'static::first', + /* ---------------- Redis 2.2 ---------------- */ + 'PERSIST' => 'static::first', + 'STRLEN' => 'static::first', + 'SETRANGE' => 'static::first', + 'GETRANGE' => 'static::first', + 'SETBIT' => 'static::first', + 'GETBIT' => 'static::first', + 'RPUSHX' => 'static::first', + 'LPUSHX' => 'static::first', + 'LINSERT' => 'static::first', + 'BRPOPLPUSH' => 'static::skipLast', + 'ZREVRANGEBYSCORE' => 'static::first', + 'WATCH' => 'static::all', + /* ---------------- Redis 2.6 ---------------- */ + 'PTTL' => 'static::first', + 'PEXPIRE' => 'static::first', + 'PEXPIREAT' => 'static::first', + 'PSETEX' => 'static::first', + 'INCRBYFLOAT' => 'static::first', + 'BITOP' => 'static::skipFirst', + 'BITCOUNT' => 'static::first', + 'HINCRBYFLOAT' => 'static::first', + 'EVAL' => 'static::evalKeys', + 'EVALSHA' => 'static::evalKeys', + 'MIGRATE' => 'static::migrate', + /* ---------------- Redis 2.8 ---------------- */ + 'SSCAN' => 'static::first', + 'ZSCAN' => 'static::first', + 'HSCAN' => 'static::first', + 'PFADD' => 'static::first', + 'PFCOUNT' => 'static::all', + 'PFMERGE' => 'static::all', + 'ZLEXCOUNT' => 'static::first', + 'ZRANGEBYLEX' => 'static::first', + 'ZREMRANGEBYLEX' => 'static::first', + 'ZREVRANGEBYLEX' => 'static::first', + 'BITPOS' => 'static::first', + /* ---------------- Redis 3.2 ---------------- */ + 'HSTRLEN' => 'static::first', + 'BITFIELD' => 'static::first', + 'GEOADD' => 'static::first', + 'GEOHASH' => 'static::first', + 'GEOPOS' => 'static::first', + 'GEODIST' => 'static::first', + 'GEORADIUS' => 'static::georadius', + 'GEORADIUSBYMEMBER' => 'static::georadius', + ); + } + + /** + * Sets a prefix that is applied to all the keys. + * + * @param string $prefix Prefix for the keys. + */ + public function setPrefix($prefix) + { + $this->prefix = $prefix; + } + + /** + * Gets the current prefix. + * + * @return string + */ + public function getPrefix() + { + return $this->prefix; + } + + /** + * {@inheritdoc} + */ + public function process(CommandInterface $command) + { + if ($command instanceof PrefixableCommandInterface) { + $command->prefixKeys($this->prefix); + } elseif (isset($this->commands[$commandID = strtoupper($command->getId())])) { + call_user_func($this->commands[$commandID], $command, $this->prefix); + } + } + + /** + * Sets an handler for the specified command ID. + * + * The callback signature must have 2 parameters of the following types: + * + * - Predis\Command\CommandInterface (command instance) + * - String (prefix) + * + * When the callback argument is omitted or NULL, the previously + * associated handler for the specified command ID is removed. + * + * @param string $commandID The ID of the command to be handled. + * @param mixed $callback A valid callable object or NULL. + * + * @throws \InvalidArgumentException + */ + public function setCommandHandler($commandID, $callback = null) + { + $commandID = strtoupper($commandID); + + if (!isset($callback)) { + unset($this->commands[$commandID]); + + return; + } + + if (!is_callable($callback)) { + throw new \InvalidArgumentException( + 'Callback must be a valid callable object or NULL' + ); + } + + $this->commands[$commandID] = $callback; + } + + /** + * {@inheritdoc} + */ + public function __toString() + { + return $this->getPrefix(); + } + + /** + * Applies the specified prefix only the first argument. + * + * @param CommandInterface $command Command instance. + * @param string $prefix Prefix string. + */ + public static function first(CommandInterface $command, $prefix) + { + if ($arguments = $command->getArguments()) { + $arguments[0] = "$prefix{$arguments[0]}"; + $command->setRawArguments($arguments); + } + } + + /** + * Applies the specified prefix to all the arguments. + * + * @param CommandInterface $command Command instance. + * @param string $prefix Prefix string. + */ + public static function all(CommandInterface $command, $prefix) + { + if ($arguments = $command->getArguments()) { + foreach ($arguments as &$key) { + $key = "$prefix$key"; + } + + $command->setRawArguments($arguments); + } + } + + /** + * Applies the specified prefix only to even arguments in the list. + * + * @param CommandInterface $command Command instance. + * @param string $prefix Prefix string. + */ + public static function interleaved(CommandInterface $command, $prefix) + { + if ($arguments = $command->getArguments()) { + $length = count($arguments); + + for ($i = 0; $i < $length; $i += 2) { + $arguments[$i] = "$prefix{$arguments[$i]}"; + } + + $command->setRawArguments($arguments); + } + } + + /** + * Applies the specified prefix to all the arguments but the first one. + * + * @param CommandInterface $command Command instance. + * @param string $prefix Prefix string. + */ + public static function skipFirst(CommandInterface $command, $prefix) + { + if ($arguments = $command->getArguments()) { + $length = count($arguments); + + for ($i = 1; $i < $length; ++$i) { + $arguments[$i] = "$prefix{$arguments[$i]}"; + } + + $command->setRawArguments($arguments); + } + } + + /** + * Applies the specified prefix to all the arguments but the last one. + * + * @param CommandInterface $command Command instance. + * @param string $prefix Prefix string. + */ + public static function skipLast(CommandInterface $command, $prefix) + { + if ($arguments = $command->getArguments()) { + $length = count($arguments); + + for ($i = 0; $i < $length - 1; ++$i) { + $arguments[$i] = "$prefix{$arguments[$i]}"; + } + + $command->setRawArguments($arguments); + } + } + + /** + * Applies the specified prefix to the keys of a SORT command. + * + * @param CommandInterface $command Command instance. + * @param string $prefix Prefix string. + */ + public static function sort(CommandInterface $command, $prefix) + { + if ($arguments = $command->getArguments()) { + $arguments[0] = "$prefix{$arguments[0]}"; + + if (($count = count($arguments)) > 1) { + for ($i = 1; $i < $count; ++$i) { + switch (strtoupper($arguments[$i])) { + case 'BY': + case 'STORE': + $arguments[$i] = "$prefix{$arguments[++$i]}"; + break; + + case 'GET': + $value = $arguments[++$i]; + if ($value !== '#') { + $arguments[$i] = "$prefix$value"; + } + break; + + case 'LIMIT'; + $i += 2; + break; + } + } + } + + $command->setRawArguments($arguments); + } + } + + /** + * Applies the specified prefix to the keys of an EVAL-based command. + * + * @param CommandInterface $command Command instance. + * @param string $prefix Prefix string. + */ + public static function evalKeys(CommandInterface $command, $prefix) + { + if ($arguments = $command->getArguments()) { + for ($i = 2; $i < $arguments[1] + 2; ++$i) { + $arguments[$i] = "$prefix{$arguments[$i]}"; + } + + $command->setRawArguments($arguments); + } + } + + /** + * Applies the specified prefix to the keys of Z[INTERSECTION|UNION]STORE. + * + * @param CommandInterface $command Command instance. + * @param string $prefix Prefix string. + */ + public static function zsetStore(CommandInterface $command, $prefix) + { + if ($arguments = $command->getArguments()) { + $arguments[0] = "$prefix{$arguments[0]}"; + $length = ((int) $arguments[1]) + 2; + + for ($i = 2; $i < $length; ++$i) { + $arguments[$i] = "$prefix{$arguments[$i]}"; + } + + $command->setRawArguments($arguments); + } + } + + /** + * Applies the specified prefix to the key of a MIGRATE command. + * + * @param CommandInterface $command Command instance. + * @param string $prefix Prefix string. + */ + public static function migrate(CommandInterface $command, $prefix) + { + if ($arguments = $command->getArguments()) { + $arguments[2] = "$prefix{$arguments[2]}"; + $command->setRawArguments($arguments); + } + } + + /** + * Applies the specified prefix to the key of a GEORADIUS command. + * + * @param CommandInterface $command Command instance. + * @param string $prefix Prefix string. + */ + public static function georadius(CommandInterface $command, $prefix) + { + if ($arguments = $command->getArguments()) { + $arguments[0] = "$prefix{$arguments[0]}"; + $startIndex = $command->getId() === 'GEORADIUS' ? 5 : 4; + + if (($count = count($arguments)) > $startIndex) { + for ($i = $startIndex; $i < $count; ++$i) { + switch (strtoupper($arguments[$i])) { + case 'STORE': + case 'STOREDIST': + $arguments[$i] = "$prefix{$arguments[++$i]}"; + break; + + } + } + } + + $command->setRawArguments($arguments); + } + } +} diff --git a/vendor/predis/predis/src/Command/Processor/ProcessorChain.php b/vendor/predis/predis/src/Command/Processor/ProcessorChain.php new file mode 100644 index 00000000..c5915632 --- /dev/null +++ b/vendor/predis/predis/src/Command/Processor/ProcessorChain.php @@ -0,0 +1,130 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command\Processor; + +use Predis\Command\CommandInterface; + +/** + * Default implementation of a command processors chain. + * + * @author Daniele Alessandri + */ +class ProcessorChain implements \ArrayAccess, ProcessorInterface +{ + private $processors = array(); + + /** + * @param array $processors List of instances of ProcessorInterface. + */ + public function __construct($processors = array()) + { + foreach ($processors as $processor) { + $this->add($processor); + } + } + + /** + * {@inheritdoc} + */ + public function add(ProcessorInterface $processor) + { + $this->processors[] = $processor; + } + + /** + * {@inheritdoc} + */ + public function remove(ProcessorInterface $processor) + { + if (false !== $index = array_search($processor, $this->processors, true)) { + unset($this[$index]); + } + } + + /** + * {@inheritdoc} + */ + public function process(CommandInterface $command) + { + for ($i = 0; $i < $count = count($this->processors); ++$i) { + $this->processors[$i]->process($command); + } + } + + /** + * {@inheritdoc} + */ + public function getProcessors() + { + return $this->processors; + } + + /** + * Returns an iterator over the list of command processor in the chain. + * + * @return \ArrayIterator + */ + public function getIterator() + { + return new \ArrayIterator($this->processors); + } + + /** + * Returns the number of command processors in the chain. + * + * @return int + */ + public function count() + { + return count($this->processors); + } + + /** + * {@inheritdoc} + */ + public function offsetExists($index) + { + return isset($this->processors[$index]); + } + + /** + * {@inheritdoc} + */ + public function offsetGet($index) + { + return $this->processors[$index]; + } + + /** + * {@inheritdoc} + */ + public function offsetSet($index, $processor) + { + if (!$processor instanceof ProcessorInterface) { + throw new \InvalidArgumentException( + 'A processor chain accepts only instances of '. + "'Predis\Command\Processor\ProcessorInterface'." + ); + } + + $this->processors[$index] = $processor; + } + + /** + * {@inheritdoc} + */ + public function offsetUnset($index) + { + unset($this->processors[$index]); + $this->processors = array_values($this->processors); + } +} diff --git a/vendor/predis/predis/src/Command/Processor/ProcessorInterface.php b/vendor/predis/predis/src/Command/Processor/ProcessorInterface.php new file mode 100644 index 00000000..41613d67 --- /dev/null +++ b/vendor/predis/predis/src/Command/Processor/ProcessorInterface.php @@ -0,0 +1,29 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command\Processor; + +use Predis\Command\CommandInterface; + +/** + * A command processor processes Redis commands before they are sent to Redis. + * + * @author Daniele Alessandri + */ +interface ProcessorInterface +{ + /** + * Processes the given Redis command. + * + * @param CommandInterface $command Command instance. + */ + public function process(CommandInterface $command); +} diff --git a/vendor/predis/predis/src/Command/PubSubPublish.php b/vendor/predis/predis/src/Command/PubSubPublish.php new file mode 100644 index 00000000..31583c61 --- /dev/null +++ b/vendor/predis/predis/src/Command/PubSubPublish.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/publish + * + * @author Daniele Alessandri + */ +class PubSubPublish extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'PUBLISH'; + } +} diff --git a/vendor/predis/predis/src/Command/PubSubPubsub.php b/vendor/predis/predis/src/Command/PubSubPubsub.php new file mode 100644 index 00000000..82854938 --- /dev/null +++ b/vendor/predis/predis/src/Command/PubSubPubsub.php @@ -0,0 +1,61 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/pubsub + * + * @author Daniele Alessandri + */ +class PubSubPubsub extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'PUBSUB'; + } + + /** + * {@inheritdoc} + */ + public function parseResponse($data) + { + switch (strtolower($this->getArgument(0))) { + case 'numsub': + return self::processNumsub($data); + + default: + return $data; + } + } + + /** + * Returns the processed response to PUBSUB NUMSUB. + * + * @param array $channels List of channels + * + * @return array + */ + protected static function processNumsub(array $channels) + { + $processed = array(); + $count = count($channels); + + for ($i = 0; $i < $count; ++$i) { + $processed[$channels[$i]] = $channels[++$i]; + } + + return $processed; + } +} diff --git a/vendor/predis/predis/src/Command/PubSubSubscribe.php b/vendor/predis/predis/src/Command/PubSubSubscribe.php new file mode 100644 index 00000000..178151af --- /dev/null +++ b/vendor/predis/predis/src/Command/PubSubSubscribe.php @@ -0,0 +1,36 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/subscribe + * + * @author Daniele Alessandri + */ +class PubSubSubscribe extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'SUBSCRIBE'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + return self::normalizeArguments($arguments); + } +} diff --git a/vendor/predis/predis/src/Command/PubSubSubscribeByPattern.php b/vendor/predis/predis/src/Command/PubSubSubscribeByPattern.php new file mode 100644 index 00000000..ddefbc4d --- /dev/null +++ b/vendor/predis/predis/src/Command/PubSubSubscribeByPattern.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/psubscribe + * + * @author Daniele Alessandri + */ +class PubSubSubscribeByPattern extends PubSubSubscribe +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'PSUBSCRIBE'; + } +} diff --git a/vendor/predis/predis/src/Command/PubSubUnsubscribe.php b/vendor/predis/predis/src/Command/PubSubUnsubscribe.php new file mode 100644 index 00000000..4d66864d --- /dev/null +++ b/vendor/predis/predis/src/Command/PubSubUnsubscribe.php @@ -0,0 +1,36 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/unsubscribe + * + * @author Daniele Alessandri + */ +class PubSubUnsubscribe extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'UNSUBSCRIBE'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + return self::normalizeArguments($arguments); + } +} diff --git a/vendor/predis/predis/src/Command/PubSubUnsubscribeByPattern.php b/vendor/predis/predis/src/Command/PubSubUnsubscribeByPattern.php new file mode 100644 index 00000000..011bfc21 --- /dev/null +++ b/vendor/predis/predis/src/Command/PubSubUnsubscribeByPattern.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/punsubscribe + * + * @author Daniele Alessandri + */ +class PubSubUnsubscribeByPattern extends PubSubUnsubscribe +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'PUNSUBSCRIBE'; + } +} diff --git a/vendor/predis/predis/src/Command/RawCommand.php b/vendor/predis/predis/src/Command/RawCommand.php new file mode 100644 index 00000000..a9245d9b --- /dev/null +++ b/vendor/predis/predis/src/Command/RawCommand.php @@ -0,0 +1,131 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * Class for generic "anonymous" Redis commands. + * + * This command class does not filter input arguments or parse responses, but + * can be used to leverage the standard Predis API to execute any command simply + * by providing the needed arguments following the command signature as defined + * by Redis in its documentation. + * + * @author Daniele Alessandri + */ +class RawCommand implements CommandInterface +{ + private $slot; + private $commandID; + private $arguments; + + /** + * @param array $arguments Command ID and its arguments. + * + * @throws \InvalidArgumentException + */ + public function __construct(array $arguments) + { + if (!$arguments) { + throw new \InvalidArgumentException( + 'The arguments array must contain at least the command ID.' + ); + } + + $this->commandID = strtoupper(array_shift($arguments)); + $this->arguments = $arguments; + } + + /** + * Creates a new raw command using a variadic method. + * + * @param string $commandID Redis command ID. + * @param string ... Arguments list for the command. + * + * @return CommandInterface + */ + public static function create($commandID /* [ $arg, ... */) + { + $arguments = func_get_args(); + $command = new self($arguments); + + return $command; + } + + /** + * {@inheritdoc} + */ + public function getId() + { + return $this->commandID; + } + + /** + * {@inheritdoc} + */ + public function setArguments(array $arguments) + { + $this->arguments = $arguments; + unset($this->slot); + } + + /** + * {@inheritdoc} + */ + public function setRawArguments(array $arguments) + { + $this->setArguments($arguments); + } + + /** + * {@inheritdoc} + */ + public function getArguments() + { + return $this->arguments; + } + + /** + * {@inheritdoc} + */ + public function getArgument($index) + { + if (isset($this->arguments[$index])) { + return $this->arguments[$index]; + } + } + + /** + * {@inheritdoc} + */ + public function setSlot($slot) + { + $this->slot = $slot; + } + + /** + * {@inheritdoc} + */ + public function getSlot() + { + if (isset($this->slot)) { + return $this->slot; + } + } + + /** + * {@inheritdoc} + */ + public function parseResponse($data) + { + return $data; + } +} diff --git a/vendor/predis/predis/src/Command/ScriptCommand.php b/vendor/predis/predis/src/Command/ScriptCommand.php new file mode 100644 index 00000000..99a76d85 --- /dev/null +++ b/vendor/predis/predis/src/Command/ScriptCommand.php @@ -0,0 +1,77 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * Base class used to implement an higher level abstraction for commands based + * on Lua scripting with EVAL and EVALSHA. + * + * @link http://redis.io/commands/eval + * + * @author Daniele Alessandri + */ +abstract class ScriptCommand extends ServerEvalSHA +{ + /** + * Gets the body of a Lua script. + * + * @return string + */ + abstract public function getScript(); + + /** + * Specifies the number of arguments that should be considered as keys. + * + * The default behaviour for the base class is to return 0 to indicate that + * all the elements of the arguments array should be considered as keys, but + * subclasses can enforce a static number of keys. + * + * @return int + */ + protected function getKeysCount() + { + return 0; + } + + /** + * Returns the elements from the arguments that are identified as keys. + * + * @return array + */ + public function getKeys() + { + return array_slice($this->getArguments(), 2, $this->getKeysCount()); + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + if (($numkeys = $this->getKeysCount()) && $numkeys < 0) { + $numkeys = count($arguments) + $numkeys; + } + + return array_merge(array(sha1($this->getScript()), (int) $numkeys), $arguments); + } + + /** + * @return array + */ + public function getEvalArguments() + { + $arguments = $this->getArguments(); + $arguments[0] = $this->getScript(); + + return $arguments; + } +} diff --git a/vendor/predis/predis/src/Command/ServerBackgroundRewriteAOF.php b/vendor/predis/predis/src/Command/ServerBackgroundRewriteAOF.php new file mode 100644 index 00000000..cba4da62 --- /dev/null +++ b/vendor/predis/predis/src/Command/ServerBackgroundRewriteAOF.php @@ -0,0 +1,36 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/bgrewriteaof + * + * @author Daniele Alessandri + */ +class ServerBackgroundRewriteAOF extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'BGREWRITEAOF'; + } + + /** + * {@inheritdoc} + */ + public function parseResponse($data) + { + return $data == 'Background append only file rewriting started'; + } +} diff --git a/vendor/predis/predis/src/Command/ServerBackgroundSave.php b/vendor/predis/predis/src/Command/ServerBackgroundSave.php new file mode 100644 index 00000000..083fd8f1 --- /dev/null +++ b/vendor/predis/predis/src/Command/ServerBackgroundSave.php @@ -0,0 +1,36 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/bgsave + * + * @author Daniele Alessandri + */ +class ServerBackgroundSave extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'BGSAVE'; + } + + /** + * {@inheritdoc} + */ + public function parseResponse($data) + { + return $data === 'Background saving started' ? true : $data; + } +} diff --git a/vendor/predis/predis/src/Command/ServerClient.php b/vendor/predis/predis/src/Command/ServerClient.php new file mode 100644 index 00000000..6d573773 --- /dev/null +++ b/vendor/predis/predis/src/Command/ServerClient.php @@ -0,0 +1,74 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/client-list + * @link http://redis.io/commands/client-kill + * @link http://redis.io/commands/client-getname + * @link http://redis.io/commands/client-setname + * + * @author Daniele Alessandri + */ +class ServerClient extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'CLIENT'; + } + + /** + * {@inheritdoc} + */ + public function parseResponse($data) + { + $args = array_change_key_case($this->getArguments(), CASE_UPPER); + + switch (strtoupper($args[0])) { + case 'LIST': + return $this->parseClientList($data); + case 'KILL': + case 'GETNAME': + case 'SETNAME': + default: + return $data; + } + } + + /** + * Parses the response to CLIENT LIST and returns a structured list. + * + * @param string $data Response buffer. + * + * @return array + */ + protected function parseClientList($data) + { + $clients = array(); + + foreach (explode("\n", $data, -1) as $clientData) { + $client = array(); + + foreach (explode(' ', $clientData) as $kv) { + @list($k, $v) = explode('=', $kv); + $client[$k] = $v; + } + + $clients[] = $client; + } + + return $clients; + } +} diff --git a/vendor/predis/predis/src/Command/ServerCommand.php b/vendor/predis/predis/src/Command/ServerCommand.php new file mode 100644 index 00000000..274a40c7 --- /dev/null +++ b/vendor/predis/predis/src/Command/ServerCommand.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/command + * + * @author Daniele Alessandri + */ +class ServerCommand extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'COMMAND'; + } +} diff --git a/vendor/predis/predis/src/Command/ServerConfig.php b/vendor/predis/predis/src/Command/ServerConfig.php new file mode 100644 index 00000000..2a3e3733 --- /dev/null +++ b/vendor/predis/predis/src/Command/ServerConfig.php @@ -0,0 +1,49 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/config-set + * @link http://redis.io/commands/config-get + * @link http://redis.io/commands/config-resetstat + * @link http://redis.io/commands/config-rewrite + * + * @author Daniele Alessandri + */ +class ServerConfig extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'CONFIG'; + } + + /** + * {@inheritdoc} + */ + public function parseResponse($data) + { + if (is_array($data)) { + $result = array(); + + for ($i = 0; $i < count($data); ++$i) { + $result[$data[$i]] = $data[++$i]; + } + + return $result; + } + + return $data; + } +} diff --git a/vendor/predis/predis/src/Command/ServerDatabaseSize.php b/vendor/predis/predis/src/Command/ServerDatabaseSize.php new file mode 100644 index 00000000..bd098e9a --- /dev/null +++ b/vendor/predis/predis/src/Command/ServerDatabaseSize.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/dbsize + * + * @author Daniele Alessandri + */ +class ServerDatabaseSize extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'DBSIZE'; + } +} diff --git a/vendor/predis/predis/src/Command/ServerEval.php b/vendor/predis/predis/src/Command/ServerEval.php new file mode 100644 index 00000000..84d191dc --- /dev/null +++ b/vendor/predis/predis/src/Command/ServerEval.php @@ -0,0 +1,38 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/eval + * + * @author Daniele Alessandri + */ +class ServerEval extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'EVAL'; + } + + /** + * Calculates the SHA1 hash of the body of the script. + * + * @return string SHA1 hash. + */ + public function getScriptHash() + { + return sha1($this->getArgument(0)); + } +} diff --git a/vendor/predis/predis/src/Command/ServerEvalSHA.php b/vendor/predis/predis/src/Command/ServerEvalSHA.php new file mode 100644 index 00000000..f2c920cb --- /dev/null +++ b/vendor/predis/predis/src/Command/ServerEvalSHA.php @@ -0,0 +1,38 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/evalsha + * + * @author Daniele Alessandri + */ +class ServerEvalSHA extends ServerEval +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'EVALSHA'; + } + + /** + * Returns the SHA1 hash of the body of the script. + * + * @return string SHA1 hash. + */ + public function getScriptHash() + { + return $this->getArgument(0); + } +} diff --git a/vendor/predis/predis/src/Command/ServerFlushAll.php b/vendor/predis/predis/src/Command/ServerFlushAll.php new file mode 100644 index 00000000..5d0b390d --- /dev/null +++ b/vendor/predis/predis/src/Command/ServerFlushAll.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/flushall + * + * @author Daniele Alessandri + */ +class ServerFlushAll extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'FLUSHALL'; + } +} diff --git a/vendor/predis/predis/src/Command/ServerFlushDatabase.php b/vendor/predis/predis/src/Command/ServerFlushDatabase.php new file mode 100644 index 00000000..7052c51c --- /dev/null +++ b/vendor/predis/predis/src/Command/ServerFlushDatabase.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/flushdb + * + * @author Daniele Alessandri + */ +class ServerFlushDatabase extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'FLUSHDB'; + } +} diff --git a/vendor/predis/predis/src/Command/ServerInfo.php b/vendor/predis/predis/src/Command/ServerInfo.php new file mode 100644 index 00000000..0d365aec --- /dev/null +++ b/vendor/predis/predis/src/Command/ServerInfo.php @@ -0,0 +1,111 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/info + * + * @author Daniele Alessandri + */ +class ServerInfo extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'INFO'; + } + + /** + * {@inheritdoc} + */ + public function parseResponse($data) + { + $info = array(); + $infoLines = preg_split('/\r?\n/', $data); + + foreach ($infoLines as $row) { + if (strpos($row, ':') === false) { + continue; + } + + list($k, $v) = $this->parseRow($row); + $info[$k] = $v; + } + + return $info; + } + + /** + * Parses a single row of the response and returns the key-value pair. + * + * @param string $row Single row of the response. + * + * @return array + */ + protected function parseRow($row) + { + list($k, $v) = explode(':', $row, 2); + + if (preg_match('/^db\d+$/', $k)) { + $v = $this->parseDatabaseStats($v); + } + + return array($k, $v); + } + + /** + * Extracts the statistics of each logical DB from the string buffer. + * + * @param string $str Response buffer. + * + * @return array + */ + protected function parseDatabaseStats($str) + { + $db = array(); + + foreach (explode(',', $str) as $dbvar) { + list($dbvk, $dbvv) = explode('=', $dbvar); + $db[trim($dbvk)] = $dbvv; + } + + return $db; + } + + /** + * Parses the response and extracts the allocation statistics. + * + * @param string $str Response buffer. + * + * @return array + */ + protected function parseAllocationStats($str) + { + $stats = array(); + + foreach (explode(',', $str) as $kv) { + @list($size, $objects, $extra) = explode('=', $kv); + + // hack to prevent incorrect values when parsing the >=256 key + if (isset($extra)) { + $size = ">=$objects"; + $objects = $extra; + } + + $stats[$size] = $objects; + } + + return $stats; + } +} diff --git a/vendor/predis/predis/src/Command/ServerInfoV26x.php b/vendor/predis/predis/src/Command/ServerInfoV26x.php new file mode 100644 index 00000000..5e1407e2 --- /dev/null +++ b/vendor/predis/predis/src/Command/ServerInfoV26x.php @@ -0,0 +1,56 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/info + * + * @author Daniele Alessandri + */ +class ServerInfoV26x extends ServerInfo +{ + /** + * {@inheritdoc} + */ + public function parseResponse($data) + { + if ($data === '') { + return array(); + } + + $info = array(); + + $current = null; + $infoLines = preg_split('/\r?\n/', $data); + + if (isset($infoLines[0]) && $infoLines[0][0] !== '#') { + return parent::parseResponse($data); + } + + foreach ($infoLines as $row) { + if ($row === '') { + continue; + } + + if (preg_match('/^# (\w+)$/', $row, $matches)) { + $info[$matches[1]] = array(); + $current = &$info[$matches[1]]; + continue; + } + + list($k, $v) = $this->parseRow($row); + $current[$k] = $v; + } + + return $info; + } +} diff --git a/vendor/predis/predis/src/Command/ServerLastSave.php b/vendor/predis/predis/src/Command/ServerLastSave.php new file mode 100644 index 00000000..d5353598 --- /dev/null +++ b/vendor/predis/predis/src/Command/ServerLastSave.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/lastsave + * + * @author Daniele Alessandri + */ +class ServerLastSave extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'LASTSAVE'; + } +} diff --git a/vendor/predis/predis/src/Command/ServerMonitor.php b/vendor/predis/predis/src/Command/ServerMonitor.php new file mode 100644 index 00000000..7f3dda9f --- /dev/null +++ b/vendor/predis/predis/src/Command/ServerMonitor.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/monitor + * + * @author Daniele Alessandri + */ +class ServerMonitor extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'MONITOR'; + } +} diff --git a/vendor/predis/predis/src/Command/ServerObject.php b/vendor/predis/predis/src/Command/ServerObject.php new file mode 100644 index 00000000..adec4984 --- /dev/null +++ b/vendor/predis/predis/src/Command/ServerObject.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/object + * + * @author Daniele Alessandri + */ +class ServerObject extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'OBJECT'; + } +} diff --git a/vendor/predis/predis/src/Command/ServerSave.php b/vendor/predis/predis/src/Command/ServerSave.php new file mode 100644 index 00000000..ffe43e55 --- /dev/null +++ b/vendor/predis/predis/src/Command/ServerSave.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/save + * + * @author Daniele Alessandri + */ +class ServerSave extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'SAVE'; + } +} diff --git a/vendor/predis/predis/src/Command/ServerScript.php b/vendor/predis/predis/src/Command/ServerScript.php new file mode 100644 index 00000000..8927c53a --- /dev/null +++ b/vendor/predis/predis/src/Command/ServerScript.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/script + * + * @author Daniele Alessandri + */ +class ServerScript extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'SCRIPT'; + } +} diff --git a/vendor/predis/predis/src/Command/ServerSentinel.php b/vendor/predis/predis/src/Command/ServerSentinel.php new file mode 100644 index 00000000..f2a7b131 --- /dev/null +++ b/vendor/predis/predis/src/Command/ServerSentinel.php @@ -0,0 +1,66 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/topics/sentinel + * + * @author Daniele Alessandri + */ +class ServerSentinel extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'SENTINEL'; + } + + /** + * {@inheritdoc} + */ + public function parseResponse($data) + { + switch (strtolower($this->getArgument(0))) { + case 'masters': + case 'slaves': + return self::processMastersOrSlaves($data); + + default: + return $data; + } + } + + /** + * Returns a processed response to SENTINEL MASTERS or SENTINEL SLAVES. + * + * @param array $servers List of Redis servers. + * + * @return array + */ + protected static function processMastersOrSlaves(array $servers) + { + foreach ($servers as $idx => $node) { + $processed = array(); + $count = count($node); + + for ($i = 0; $i < $count; ++$i) { + $processed[$node[$i]] = $node[++$i]; + } + + $servers[$idx] = $processed; + } + + return $servers; + } +} diff --git a/vendor/predis/predis/src/Command/ServerShutdown.php b/vendor/predis/predis/src/Command/ServerShutdown.php new file mode 100644 index 00000000..de97984a --- /dev/null +++ b/vendor/predis/predis/src/Command/ServerShutdown.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/shutdown + * + * @author Daniele Alessandri + */ +class ServerShutdown extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'SHUTDOWN'; + } +} diff --git a/vendor/predis/predis/src/Command/ServerSlaveOf.php b/vendor/predis/predis/src/Command/ServerSlaveOf.php new file mode 100644 index 00000000..5438d660 --- /dev/null +++ b/vendor/predis/predis/src/Command/ServerSlaveOf.php @@ -0,0 +1,40 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/slaveof + * + * @author Daniele Alessandri + */ +class ServerSlaveOf extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'SLAVEOF'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + if (count($arguments) === 0 || $arguments[0] === 'NO ONE') { + return array('NO', 'ONE'); + } + + return $arguments; + } +} diff --git a/vendor/predis/predis/src/Command/ServerSlowlog.php b/vendor/predis/predis/src/Command/ServerSlowlog.php new file mode 100644 index 00000000..ee646a00 --- /dev/null +++ b/vendor/predis/predis/src/Command/ServerSlowlog.php @@ -0,0 +1,51 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/slowlog + * + * @author Daniele Alessandri + */ +class ServerSlowlog extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'SLOWLOG'; + } + + /** + * {@inheritdoc} + */ + public function parseResponse($data) + { + if (is_array($data)) { + $log = array(); + + foreach ($data as $index => $entry) { + $log[$index] = array( + 'id' => $entry[0], + 'timestamp' => $entry[1], + 'duration' => $entry[2], + 'command' => $entry[3], + ); + } + + return $log; + } + + return $data; + } +} diff --git a/vendor/predis/predis/src/Command/ServerTime.php b/vendor/predis/predis/src/Command/ServerTime.php new file mode 100644 index 00000000..460cd07d --- /dev/null +++ b/vendor/predis/predis/src/Command/ServerTime.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/time + * + * @author Daniele Alessandri + */ +class ServerTime extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'TIME'; + } +} diff --git a/vendor/predis/predis/src/Command/SetAdd.php b/vendor/predis/predis/src/Command/SetAdd.php new file mode 100644 index 00000000..278f0ae6 --- /dev/null +++ b/vendor/predis/predis/src/Command/SetAdd.php @@ -0,0 +1,36 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/sadd + * + * @author Daniele Alessandri + */ +class SetAdd extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'SADD'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + return self::normalizeVariadic($arguments); + } +} diff --git a/vendor/predis/predis/src/Command/SetCardinality.php b/vendor/predis/predis/src/Command/SetCardinality.php new file mode 100644 index 00000000..0f9ce94b --- /dev/null +++ b/vendor/predis/predis/src/Command/SetCardinality.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/scard + * + * @author Daniele Alessandri + */ +class SetCardinality extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'SCARD'; + } +} diff --git a/vendor/predis/predis/src/Command/SetDifference.php b/vendor/predis/predis/src/Command/SetDifference.php new file mode 100644 index 00000000..42c5a1a5 --- /dev/null +++ b/vendor/predis/predis/src/Command/SetDifference.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/sdiff + * + * @author Daniele Alessandri + */ +class SetDifference extends SetIntersection +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'SDIFF'; + } +} diff --git a/vendor/predis/predis/src/Command/SetDifferenceStore.php b/vendor/predis/predis/src/Command/SetDifferenceStore.php new file mode 100644 index 00000000..9fd467b2 --- /dev/null +++ b/vendor/predis/predis/src/Command/SetDifferenceStore.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/sdiffstore + * + * @author Daniele Alessandri + */ +class SetDifferenceStore extends SetIntersectionStore +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'SDIFFSTORE'; + } +} diff --git a/vendor/predis/predis/src/Command/SetIntersection.php b/vendor/predis/predis/src/Command/SetIntersection.php new file mode 100644 index 00000000..0db650cc --- /dev/null +++ b/vendor/predis/predis/src/Command/SetIntersection.php @@ -0,0 +1,36 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/sinter + * + * @author Daniele Alessandri + */ +class SetIntersection extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'SINTER'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + return self::normalizeArguments($arguments); + } +} diff --git a/vendor/predis/predis/src/Command/SetIntersectionStore.php b/vendor/predis/predis/src/Command/SetIntersectionStore.php new file mode 100644 index 00000000..f375b993 --- /dev/null +++ b/vendor/predis/predis/src/Command/SetIntersectionStore.php @@ -0,0 +1,40 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/sinterstore + * + * @author Daniele Alessandri + */ +class SetIntersectionStore extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'SINTERSTORE'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + if (count($arguments) === 2 && is_array($arguments[1])) { + return array_merge(array($arguments[0]), $arguments[1]); + } + + return $arguments; + } +} diff --git a/vendor/predis/predis/src/Command/SetIsMember.php b/vendor/predis/predis/src/Command/SetIsMember.php new file mode 100644 index 00000000..5b22f9fd --- /dev/null +++ b/vendor/predis/predis/src/Command/SetIsMember.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/sismember + * + * @author Daniele Alessandri + */ +class SetIsMember extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'SISMEMBER'; + } +} diff --git a/vendor/predis/predis/src/Command/SetMembers.php b/vendor/predis/predis/src/Command/SetMembers.php new file mode 100644 index 00000000..d1d0b7a9 --- /dev/null +++ b/vendor/predis/predis/src/Command/SetMembers.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/smembers + * + * @author Daniele Alessandri + */ +class SetMembers extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'SMEMBERS'; + } +} diff --git a/vendor/predis/predis/src/Command/SetMove.php b/vendor/predis/predis/src/Command/SetMove.php new file mode 100644 index 00000000..21efaa13 --- /dev/null +++ b/vendor/predis/predis/src/Command/SetMove.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/smove + * + * @author Daniele Alessandri + */ +class SetMove extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'SMOVE'; + } +} diff --git a/vendor/predis/predis/src/Command/SetPop.php b/vendor/predis/predis/src/Command/SetPop.php new file mode 100644 index 00000000..9c985642 --- /dev/null +++ b/vendor/predis/predis/src/Command/SetPop.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/spop + * + * @author Daniele Alessandri + */ +class SetPop extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'SPOP'; + } +} diff --git a/vendor/predis/predis/src/Command/SetRandomMember.php b/vendor/predis/predis/src/Command/SetRandomMember.php new file mode 100644 index 00000000..29a7be25 --- /dev/null +++ b/vendor/predis/predis/src/Command/SetRandomMember.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/srandmember + * + * @author Daniele Alessandri + */ +class SetRandomMember extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'SRANDMEMBER'; + } +} diff --git a/vendor/predis/predis/src/Command/SetRemove.php b/vendor/predis/predis/src/Command/SetRemove.php new file mode 100644 index 00000000..9b45b5ae --- /dev/null +++ b/vendor/predis/predis/src/Command/SetRemove.php @@ -0,0 +1,36 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/srem + * + * @author Daniele Alessandri + */ +class SetRemove extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'SREM'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + return self::normalizeVariadic($arguments); + } +} diff --git a/vendor/predis/predis/src/Command/SetScan.php b/vendor/predis/predis/src/Command/SetScan.php new file mode 100644 index 00000000..77625d49 --- /dev/null +++ b/vendor/predis/predis/src/Command/SetScan.php @@ -0,0 +1,66 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/sscan + * + * @author Daniele Alessandri + */ +class SetScan extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'SSCAN'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + if (count($arguments) === 3 && is_array($arguments[2])) { + $options = $this->prepareOptions(array_pop($arguments)); + $arguments = array_merge($arguments, $options); + } + + return $arguments; + } + + /** + * Returns a list of options and modifiers compatible with Redis. + * + * @param array $options List of options. + * + * @return array + */ + protected function prepareOptions($options) + { + $options = array_change_key_case($options, CASE_UPPER); + $normalized = array(); + + if (!empty($options['MATCH'])) { + $normalized[] = 'MATCH'; + $normalized[] = $options['MATCH']; + } + + if (!empty($options['COUNT'])) { + $normalized[] = 'COUNT'; + $normalized[] = $options['COUNT']; + } + + return $normalized; + } +} diff --git a/vendor/predis/predis/src/Command/SetUnion.php b/vendor/predis/predis/src/Command/SetUnion.php new file mode 100644 index 00000000..df2c68b0 --- /dev/null +++ b/vendor/predis/predis/src/Command/SetUnion.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/sunion + * + * @author Daniele Alessandri + */ +class SetUnion extends SetIntersection +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'SUNION'; + } +} diff --git a/vendor/predis/predis/src/Command/SetUnionStore.php b/vendor/predis/predis/src/Command/SetUnionStore.php new file mode 100644 index 00000000..b6e3819a --- /dev/null +++ b/vendor/predis/predis/src/Command/SetUnionStore.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/sunionstore + * + * @author Daniele Alessandri + */ +class SetUnionStore extends SetIntersectionStore +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'SUNIONSTORE'; + } +} diff --git a/vendor/predis/predis/src/Command/StringAppend.php b/vendor/predis/predis/src/Command/StringAppend.php new file mode 100644 index 00000000..302b3662 --- /dev/null +++ b/vendor/predis/predis/src/Command/StringAppend.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/append + * + * @author Daniele Alessandri + */ +class StringAppend extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'APPEND'; + } +} diff --git a/vendor/predis/predis/src/Command/StringBitCount.php b/vendor/predis/predis/src/Command/StringBitCount.php new file mode 100644 index 00000000..61669368 --- /dev/null +++ b/vendor/predis/predis/src/Command/StringBitCount.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/bitcount + * + * @author Daniele Alessandri + */ +class StringBitCount extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'BITCOUNT'; + } +} diff --git a/vendor/predis/predis/src/Command/StringBitField.php b/vendor/predis/predis/src/Command/StringBitField.php new file mode 100644 index 00000000..22824a7b --- /dev/null +++ b/vendor/predis/predis/src/Command/StringBitField.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/bitfield + * + * @author Daniele Alessandri + */ +class StringBitField extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'BITFIELD'; + } +} diff --git a/vendor/predis/predis/src/Command/StringBitOp.php b/vendor/predis/predis/src/Command/StringBitOp.php new file mode 100644 index 00000000..f16c391e --- /dev/null +++ b/vendor/predis/predis/src/Command/StringBitOp.php @@ -0,0 +1,42 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/bitop + * + * @author Daniele Alessandri + */ +class StringBitOp extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'BITOP'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + if (count($arguments) === 3 && is_array($arguments[2])) { + list($operation, $destination) = $arguments; + $arguments = $arguments[2]; + array_unshift($arguments, $operation, $destination); + } + + return $arguments; + } +} diff --git a/vendor/predis/predis/src/Command/StringBitPos.php b/vendor/predis/predis/src/Command/StringBitPos.php new file mode 100644 index 00000000..5b8668e2 --- /dev/null +++ b/vendor/predis/predis/src/Command/StringBitPos.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/bitpos + * + * @author Daniele Alessandri + */ +class StringBitPos extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'BITPOS'; + } +} diff --git a/vendor/predis/predis/src/Command/StringDecrement.php b/vendor/predis/predis/src/Command/StringDecrement.php new file mode 100644 index 00000000..c21ac615 --- /dev/null +++ b/vendor/predis/predis/src/Command/StringDecrement.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/decr + * + * @author Daniele Alessandri + */ +class StringDecrement extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'DECR'; + } +} diff --git a/vendor/predis/predis/src/Command/StringDecrementBy.php b/vendor/predis/predis/src/Command/StringDecrementBy.php new file mode 100644 index 00000000..4800d263 --- /dev/null +++ b/vendor/predis/predis/src/Command/StringDecrementBy.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/decrby + * + * @author Daniele Alessandri + */ +class StringDecrementBy extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'DECRBY'; + } +} diff --git a/vendor/predis/predis/src/Command/StringGet.php b/vendor/predis/predis/src/Command/StringGet.php new file mode 100644 index 00000000..282857ed --- /dev/null +++ b/vendor/predis/predis/src/Command/StringGet.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/get + * + * @author Daniele Alessandri + */ +class StringGet extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'GET'; + } +} diff --git a/vendor/predis/predis/src/Command/StringGetBit.php b/vendor/predis/predis/src/Command/StringGetBit.php new file mode 100644 index 00000000..6695890d --- /dev/null +++ b/vendor/predis/predis/src/Command/StringGetBit.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/getbit + * + * @author Daniele Alessandri + */ +class StringGetBit extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'GETBIT'; + } +} diff --git a/vendor/predis/predis/src/Command/StringGetMultiple.php b/vendor/predis/predis/src/Command/StringGetMultiple.php new file mode 100644 index 00000000..733b88fc --- /dev/null +++ b/vendor/predis/predis/src/Command/StringGetMultiple.php @@ -0,0 +1,36 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/mget + * + * @author Daniele Alessandri + */ +class StringGetMultiple extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'MGET'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + return self::normalizeArguments($arguments); + } +} diff --git a/vendor/predis/predis/src/Command/StringGetRange.php b/vendor/predis/predis/src/Command/StringGetRange.php new file mode 100644 index 00000000..a37f3f58 --- /dev/null +++ b/vendor/predis/predis/src/Command/StringGetRange.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/getrange + * + * @author Daniele Alessandri + */ +class StringGetRange extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'GETRANGE'; + } +} diff --git a/vendor/predis/predis/src/Command/StringGetSet.php b/vendor/predis/predis/src/Command/StringGetSet.php new file mode 100644 index 00000000..0c65a936 --- /dev/null +++ b/vendor/predis/predis/src/Command/StringGetSet.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/getset + * + * @author Daniele Alessandri + */ +class StringGetSet extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'GETSET'; + } +} diff --git a/vendor/predis/predis/src/Command/StringIncrement.php b/vendor/predis/predis/src/Command/StringIncrement.php new file mode 100644 index 00000000..75f8604e --- /dev/null +++ b/vendor/predis/predis/src/Command/StringIncrement.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/incr + * + * @author Daniele Alessandri + */ +class StringIncrement extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'INCR'; + } +} diff --git a/vendor/predis/predis/src/Command/StringIncrementBy.php b/vendor/predis/predis/src/Command/StringIncrementBy.php new file mode 100644 index 00000000..cae4cb6f --- /dev/null +++ b/vendor/predis/predis/src/Command/StringIncrementBy.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/incrby + * + * @author Daniele Alessandri + */ +class StringIncrementBy extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'INCRBY'; + } +} diff --git a/vendor/predis/predis/src/Command/StringIncrementByFloat.php b/vendor/predis/predis/src/Command/StringIncrementByFloat.php new file mode 100644 index 00000000..674d319d --- /dev/null +++ b/vendor/predis/predis/src/Command/StringIncrementByFloat.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/incrbyfloat + * + * @author Daniele Alessandri + */ +class StringIncrementByFloat extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'INCRBYFLOAT'; + } +} diff --git a/vendor/predis/predis/src/Command/StringPreciseSetExpire.php b/vendor/predis/predis/src/Command/StringPreciseSetExpire.php new file mode 100644 index 00000000..854857e9 --- /dev/null +++ b/vendor/predis/predis/src/Command/StringPreciseSetExpire.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/psetex + * + * @author Daniele Alessandri + */ +class StringPreciseSetExpire extends StringSetExpire +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'PSETEX'; + } +} diff --git a/vendor/predis/predis/src/Command/StringSet.php b/vendor/predis/predis/src/Command/StringSet.php new file mode 100644 index 00000000..db6260b5 --- /dev/null +++ b/vendor/predis/predis/src/Command/StringSet.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/set + * + * @author Daniele Alessandri + */ +class StringSet extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'SET'; + } +} diff --git a/vendor/predis/predis/src/Command/StringSetBit.php b/vendor/predis/predis/src/Command/StringSetBit.php new file mode 100644 index 00000000..273c060c --- /dev/null +++ b/vendor/predis/predis/src/Command/StringSetBit.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/setbit + * + * @author Daniele Alessandri + */ +class StringSetBit extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'SETBIT'; + } +} diff --git a/vendor/predis/predis/src/Command/StringSetExpire.php b/vendor/predis/predis/src/Command/StringSetExpire.php new file mode 100644 index 00000000..af185da7 --- /dev/null +++ b/vendor/predis/predis/src/Command/StringSetExpire.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/setex + * + * @author Daniele Alessandri + */ +class StringSetExpire extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'SETEX'; + } +} diff --git a/vendor/predis/predis/src/Command/StringSetMultiple.php b/vendor/predis/predis/src/Command/StringSetMultiple.php new file mode 100644 index 00000000..b324893f --- /dev/null +++ b/vendor/predis/predis/src/Command/StringSetMultiple.php @@ -0,0 +1,48 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/mset + * + * @author Daniele Alessandri + */ +class StringSetMultiple extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'MSET'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + if (count($arguments) === 1 && is_array($arguments[0])) { + $flattenedKVs = array(); + $args = $arguments[0]; + + foreach ($args as $k => $v) { + $flattenedKVs[] = $k; + $flattenedKVs[] = $v; + } + + return $flattenedKVs; + } + + return $arguments; + } +} diff --git a/vendor/predis/predis/src/Command/StringSetMultiplePreserve.php b/vendor/predis/predis/src/Command/StringSetMultiplePreserve.php new file mode 100644 index 00000000..f612e72f --- /dev/null +++ b/vendor/predis/predis/src/Command/StringSetMultiplePreserve.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/msetnx + * + * @author Daniele Alessandri + */ +class StringSetMultiplePreserve extends StringSetMultiple +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'MSETNX'; + } +} diff --git a/vendor/predis/predis/src/Command/StringSetPreserve.php b/vendor/predis/predis/src/Command/StringSetPreserve.php new file mode 100644 index 00000000..bbd9894a --- /dev/null +++ b/vendor/predis/predis/src/Command/StringSetPreserve.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/setnx + * + * @author Daniele Alessandri + */ +class StringSetPreserve extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'SETNX'; + } +} diff --git a/vendor/predis/predis/src/Command/StringSetRange.php b/vendor/predis/predis/src/Command/StringSetRange.php new file mode 100644 index 00000000..153d05ca --- /dev/null +++ b/vendor/predis/predis/src/Command/StringSetRange.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/setrange + * + * @author Daniele Alessandri + */ +class StringSetRange extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'SETRANGE'; + } +} diff --git a/vendor/predis/predis/src/Command/StringStrlen.php b/vendor/predis/predis/src/Command/StringStrlen.php new file mode 100644 index 00000000..8b60c53a --- /dev/null +++ b/vendor/predis/predis/src/Command/StringStrlen.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/strlen + * + * @author Daniele Alessandri + */ +class StringStrlen extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'STRLEN'; + } +} diff --git a/vendor/predis/predis/src/Command/StringSubstr.php b/vendor/predis/predis/src/Command/StringSubstr.php new file mode 100644 index 00000000..65ca1498 --- /dev/null +++ b/vendor/predis/predis/src/Command/StringSubstr.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/substr + * + * @author Daniele Alessandri + */ +class StringSubstr extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'SUBSTR'; + } +} diff --git a/vendor/predis/predis/src/Command/TransactionDiscard.php b/vendor/predis/predis/src/Command/TransactionDiscard.php new file mode 100644 index 00000000..987aca59 --- /dev/null +++ b/vendor/predis/predis/src/Command/TransactionDiscard.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/discard + * + * @author Daniele Alessandri + */ +class TransactionDiscard extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'DISCARD'; + } +} diff --git a/vendor/predis/predis/src/Command/TransactionExec.php b/vendor/predis/predis/src/Command/TransactionExec.php new file mode 100644 index 00000000..40a26500 --- /dev/null +++ b/vendor/predis/predis/src/Command/TransactionExec.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/exec + * + * @author Daniele Alessandri + */ +class TransactionExec extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'EXEC'; + } +} diff --git a/vendor/predis/predis/src/Command/TransactionMulti.php b/vendor/predis/predis/src/Command/TransactionMulti.php new file mode 100644 index 00000000..847f9b1a --- /dev/null +++ b/vendor/predis/predis/src/Command/TransactionMulti.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/multi + * + * @author Daniele Alessandri + */ +class TransactionMulti extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'MULTI'; + } +} diff --git a/vendor/predis/predis/src/Command/TransactionUnwatch.php b/vendor/predis/predis/src/Command/TransactionUnwatch.php new file mode 100644 index 00000000..0c1cec7d --- /dev/null +++ b/vendor/predis/predis/src/Command/TransactionUnwatch.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/unwatch + * + * @author Daniele Alessandri + */ +class TransactionUnwatch extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'UNWATCH'; + } +} diff --git a/vendor/predis/predis/src/Command/TransactionWatch.php b/vendor/predis/predis/src/Command/TransactionWatch.php new file mode 100644 index 00000000..33b734d5 --- /dev/null +++ b/vendor/predis/predis/src/Command/TransactionWatch.php @@ -0,0 +1,40 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/watch + * + * @author Daniele Alessandri + */ +class TransactionWatch extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'WATCH'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + if (isset($arguments[0]) && is_array($arguments[0])) { + return $arguments[0]; + } + + return $arguments; + } +} diff --git a/vendor/predis/predis/src/Command/ZSetAdd.php b/vendor/predis/predis/src/Command/ZSetAdd.php new file mode 100644 index 00000000..be2f56b0 --- /dev/null +++ b/vendor/predis/predis/src/Command/ZSetAdd.php @@ -0,0 +1,43 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/zadd + * + * @author Daniele Alessandri + */ +class ZSetAdd extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'ZADD'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + if (is_array(end($arguments))) { + foreach (array_pop($arguments) as $member => $score) { + $arguments[] = $score; + $arguments[] = $member; + } + } + + return $arguments; + } +} diff --git a/vendor/predis/predis/src/Command/ZSetCardinality.php b/vendor/predis/predis/src/Command/ZSetCardinality.php new file mode 100644 index 00000000..5d61f7ef --- /dev/null +++ b/vendor/predis/predis/src/Command/ZSetCardinality.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/zcard + * + * @author Daniele Alessandri + */ +class ZSetCardinality extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'ZCARD'; + } +} diff --git a/vendor/predis/predis/src/Command/ZSetCount.php b/vendor/predis/predis/src/Command/ZSetCount.php new file mode 100644 index 00000000..96920f2c --- /dev/null +++ b/vendor/predis/predis/src/Command/ZSetCount.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/zcount + * + * @author Daniele Alessandri + */ +class ZSetCount extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'ZCOUNT'; + } +} diff --git a/vendor/predis/predis/src/Command/ZSetIncrementBy.php b/vendor/predis/predis/src/Command/ZSetIncrementBy.php new file mode 100644 index 00000000..cabcfe91 --- /dev/null +++ b/vendor/predis/predis/src/Command/ZSetIncrementBy.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/zincrby + * + * @author Daniele Alessandri + */ +class ZSetIncrementBy extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'ZINCRBY'; + } +} diff --git a/vendor/predis/predis/src/Command/ZSetIntersectionStore.php b/vendor/predis/predis/src/Command/ZSetIntersectionStore.php new file mode 100644 index 00000000..7eea02ba --- /dev/null +++ b/vendor/predis/predis/src/Command/ZSetIntersectionStore.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/zinterstore + * + * @author Daniele Alessandri + */ +class ZSetIntersectionStore extends ZSetUnionStore +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'ZINTERSTORE'; + } +} diff --git a/vendor/predis/predis/src/Command/ZSetLexCount.php b/vendor/predis/predis/src/Command/ZSetLexCount.php new file mode 100644 index 00000000..1debf336 --- /dev/null +++ b/vendor/predis/predis/src/Command/ZSetLexCount.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/zlexcount + * + * @author Daniele Alessandri + */ +class ZSetLexCount extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'ZLEXCOUNT'; + } +} diff --git a/vendor/predis/predis/src/Command/ZSetRange.php b/vendor/predis/predis/src/Command/ZSetRange.php new file mode 100644 index 00000000..a0014a0d --- /dev/null +++ b/vendor/predis/predis/src/Command/ZSetRange.php @@ -0,0 +1,105 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/zrange + * + * @author Daniele Alessandri + */ +class ZSetRange extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'ZRANGE'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + if (count($arguments) === 4) { + $lastType = gettype($arguments[3]); + + if ($lastType === 'string' && strtoupper($arguments[3]) === 'WITHSCORES') { + // Used for compatibility with older versions + $arguments[3] = array('WITHSCORES' => true); + $lastType = 'array'; + } + + if ($lastType === 'array') { + $options = $this->prepareOptions(array_pop($arguments)); + + return array_merge($arguments, $options); + } + } + + return $arguments; + } + + /** + * Returns a list of options and modifiers compatible with Redis. + * + * @param array $options List of options. + * + * @return array + */ + protected function prepareOptions($options) + { + $opts = array_change_key_case($options, CASE_UPPER); + $finalizedOpts = array(); + + if (!empty($opts['WITHSCORES'])) { + $finalizedOpts[] = 'WITHSCORES'; + } + + return $finalizedOpts; + } + + /** + * Checks for the presence of the WITHSCORES modifier. + * + * @return bool + */ + protected function withScores() + { + $arguments = $this->getArguments(); + + if (count($arguments) < 4) { + return false; + } + + return strtoupper($arguments[3]) === 'WITHSCORES'; + } + + /** + * {@inheritdoc} + */ + public function parseResponse($data) + { + if ($this->withScores()) { + $result = array(); + + for ($i = 0; $i < count($data); ++$i) { + $result[$data[$i]] = $data[++$i]; + } + + return $result; + } + + return $data; + } +} diff --git a/vendor/predis/predis/src/Command/ZSetRangeByLex.php b/vendor/predis/predis/src/Command/ZSetRangeByLex.php new file mode 100644 index 00000000..062ef729 --- /dev/null +++ b/vendor/predis/predis/src/Command/ZSetRangeByLex.php @@ -0,0 +1,55 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/zrangebylex + * + * @author Daniele Alessandri + */ +class ZSetRangeByLex extends ZSetRange +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'ZRANGEBYLEX'; + } + + /** + * {@inheritdoc} + */ + protected function prepareOptions($options) + { + $opts = array_change_key_case($options, CASE_UPPER); + $finalizedOpts = array(); + + if (isset($opts['LIMIT']) && is_array($opts['LIMIT'])) { + $limit = array_change_key_case($opts['LIMIT'], CASE_UPPER); + + $finalizedOpts[] = 'LIMIT'; + $finalizedOpts[] = isset($limit['OFFSET']) ? $limit['OFFSET'] : $limit[0]; + $finalizedOpts[] = isset($limit['COUNT']) ? $limit['COUNT'] : $limit[1]; + } + + return $finalizedOpts; + } + + /** + * {@inheritdoc} + */ + protected function withScores() + { + return false; + } +} diff --git a/vendor/predis/predis/src/Command/ZSetRangeByScore.php b/vendor/predis/predis/src/Command/ZSetRangeByScore.php new file mode 100644 index 00000000..41e9415d --- /dev/null +++ b/vendor/predis/predis/src/Command/ZSetRangeByScore.php @@ -0,0 +1,68 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/zrangebyscore + * + * @author Daniele Alessandri + */ +class ZSetRangeByScore extends ZSetRange +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'ZRANGEBYSCORE'; + } + + /** + * {@inheritdoc} + */ + protected function prepareOptions($options) + { + $opts = array_change_key_case($options, CASE_UPPER); + $finalizedOpts = array(); + + if (isset($opts['LIMIT']) && is_array($opts['LIMIT'])) { + $limit = array_change_key_case($opts['LIMIT'], CASE_UPPER); + + $finalizedOpts[] = 'LIMIT'; + $finalizedOpts[] = isset($limit['OFFSET']) ? $limit['OFFSET'] : $limit[0]; + $finalizedOpts[] = isset($limit['COUNT']) ? $limit['COUNT'] : $limit[1]; + } + + return array_merge($finalizedOpts, parent::prepareOptions($options)); + } + + /** + * {@inheritdoc} + */ + protected function withScores() + { + $arguments = $this->getArguments(); + + for ($i = 3; $i < count($arguments); ++$i) { + switch (strtoupper($arguments[$i])) { + case 'WITHSCORES': + return true; + + case 'LIMIT': + $i += 2; + break; + } + } + + return false; + } +} diff --git a/vendor/predis/predis/src/Command/ZSetRank.php b/vendor/predis/predis/src/Command/ZSetRank.php new file mode 100644 index 00000000..431bf12a --- /dev/null +++ b/vendor/predis/predis/src/Command/ZSetRank.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/zrank + * + * @author Daniele Alessandri + */ +class ZSetRank extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'ZRANK'; + } +} diff --git a/vendor/predis/predis/src/Command/ZSetRemove.php b/vendor/predis/predis/src/Command/ZSetRemove.php new file mode 100644 index 00000000..430a8357 --- /dev/null +++ b/vendor/predis/predis/src/Command/ZSetRemove.php @@ -0,0 +1,36 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/zrem + * + * @author Daniele Alessandri + */ +class ZSetRemove extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'ZREM'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + return self::normalizeVariadic($arguments); + } +} diff --git a/vendor/predis/predis/src/Command/ZSetRemoveRangeByLex.php b/vendor/predis/predis/src/Command/ZSetRemoveRangeByLex.php new file mode 100644 index 00000000..9c44cd38 --- /dev/null +++ b/vendor/predis/predis/src/Command/ZSetRemoveRangeByLex.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/zremrangebylex + * + * @author Daniele Alessandri + */ +class ZSetRemoveRangeByLex extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'ZREMRANGEBYLEX'; + } +} diff --git a/vendor/predis/predis/src/Command/ZSetRemoveRangeByRank.php b/vendor/predis/predis/src/Command/ZSetRemoveRangeByRank.php new file mode 100644 index 00000000..1d74d05c --- /dev/null +++ b/vendor/predis/predis/src/Command/ZSetRemoveRangeByRank.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/zremrangebyrank + * + * @author Daniele Alessandri + */ +class ZSetRemoveRangeByRank extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'ZREMRANGEBYRANK'; + } +} diff --git a/vendor/predis/predis/src/Command/ZSetRemoveRangeByScore.php b/vendor/predis/predis/src/Command/ZSetRemoveRangeByScore.php new file mode 100644 index 00000000..b7cee160 --- /dev/null +++ b/vendor/predis/predis/src/Command/ZSetRemoveRangeByScore.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/zremrangebyscore + * + * @author Daniele Alessandri + */ +class ZSetRemoveRangeByScore extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'ZREMRANGEBYSCORE'; + } +} diff --git a/vendor/predis/predis/src/Command/ZSetReverseRange.php b/vendor/predis/predis/src/Command/ZSetReverseRange.php new file mode 100644 index 00000000..b444f726 --- /dev/null +++ b/vendor/predis/predis/src/Command/ZSetReverseRange.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/zrevrange + * + * @author Daniele Alessandri + */ +class ZSetReverseRange extends ZSetRange +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'ZREVRANGE'; + } +} diff --git a/vendor/predis/predis/src/Command/ZSetReverseRangeByLex.php b/vendor/predis/predis/src/Command/ZSetReverseRangeByLex.php new file mode 100644 index 00000000..bd28eb72 --- /dev/null +++ b/vendor/predis/predis/src/Command/ZSetReverseRangeByLex.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/zrevrangebylex + * + * @author Daniele Alessandri + */ +class ZSetReverseRangeByLex extends ZSetRangeByLex +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'ZREVRANGEBYLEX'; + } +} diff --git a/vendor/predis/predis/src/Command/ZSetReverseRangeByScore.php b/vendor/predis/predis/src/Command/ZSetReverseRangeByScore.php new file mode 100644 index 00000000..f552bee1 --- /dev/null +++ b/vendor/predis/predis/src/Command/ZSetReverseRangeByScore.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/zrevrangebyscore + * + * @author Daniele Alessandri + */ +class ZSetReverseRangeByScore extends ZSetRangeByScore +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'ZREVRANGEBYSCORE'; + } +} diff --git a/vendor/predis/predis/src/Command/ZSetReverseRank.php b/vendor/predis/predis/src/Command/ZSetReverseRank.php new file mode 100644 index 00000000..4c4a7780 --- /dev/null +++ b/vendor/predis/predis/src/Command/ZSetReverseRank.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/zrevrank + * + * @author Daniele Alessandri + */ +class ZSetReverseRank extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'ZREVRANK'; + } +} diff --git a/vendor/predis/predis/src/Command/ZSetScan.php b/vendor/predis/predis/src/Command/ZSetScan.php new file mode 100644 index 00000000..691030b2 --- /dev/null +++ b/vendor/predis/predis/src/Command/ZSetScan.php @@ -0,0 +1,85 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/zscan + * + * @author Daniele Alessandri + */ +class ZSetScan extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'ZSCAN'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + if (count($arguments) === 3 && is_array($arguments[2])) { + $options = $this->prepareOptions(array_pop($arguments)); + $arguments = array_merge($arguments, $options); + } + + return $arguments; + } + + /** + * Returns a list of options and modifiers compatible with Redis. + * + * @param array $options List of options. + * + * @return array + */ + protected function prepareOptions($options) + { + $options = array_change_key_case($options, CASE_UPPER); + $normalized = array(); + + if (!empty($options['MATCH'])) { + $normalized[] = 'MATCH'; + $normalized[] = $options['MATCH']; + } + + if (!empty($options['COUNT'])) { + $normalized[] = 'COUNT'; + $normalized[] = $options['COUNT']; + } + + return $normalized; + } + + /** + * {@inheritdoc} + */ + public function parseResponse($data) + { + if (is_array($data)) { + $members = $data[1]; + $result = array(); + + for ($i = 0; $i < count($members); ++$i) { + $result[$members[$i]] = (float) $members[++$i]; + } + + $data[1] = $result; + } + + return $data; + } +} diff --git a/vendor/predis/predis/src/Command/ZSetScore.php b/vendor/predis/predis/src/Command/ZSetScore.php new file mode 100644 index 00000000..4a090a20 --- /dev/null +++ b/vendor/predis/predis/src/Command/ZSetScore.php @@ -0,0 +1,28 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/zscore + * + * @author Daniele Alessandri + */ +class ZSetScore extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'ZSCORE'; + } +} diff --git a/vendor/predis/predis/src/Command/ZSetUnionStore.php b/vendor/predis/predis/src/Command/ZSetUnionStore.php new file mode 100644 index 00000000..c80e982b --- /dev/null +++ b/vendor/predis/predis/src/Command/ZSetUnionStore.php @@ -0,0 +1,78 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Command; + +/** + * @link http://redis.io/commands/zunionstore + * + * @author Daniele Alessandri + */ +class ZSetUnionStore extends Command +{ + /** + * {@inheritdoc} + */ + public function getId() + { + return 'ZUNIONSTORE'; + } + + /** + * {@inheritdoc} + */ + protected function filterArguments(array $arguments) + { + $options = array(); + $argc = count($arguments); + + if ($argc > 2 && is_array($arguments[$argc - 1])) { + $options = $this->prepareOptions(array_pop($arguments)); + } + + if (is_array($arguments[1])) { + $arguments = array_merge( + array($arguments[0], count($arguments[1])), + $arguments[1] + ); + } + + return array_merge($arguments, $options); + } + + /** + * Returns a list of options and modifiers compatible with Redis. + * + * @param array $options List of options. + * + * @return array + */ + private function prepareOptions($options) + { + $opts = array_change_key_case($options, CASE_UPPER); + $finalizedOpts = array(); + + if (isset($opts['WEIGHTS']) && is_array($opts['WEIGHTS'])) { + $finalizedOpts[] = 'WEIGHTS'; + + foreach ($opts['WEIGHTS'] as $weight) { + $finalizedOpts[] = $weight; + } + } + + if (isset($opts['AGGREGATE'])) { + $finalizedOpts[] = 'AGGREGATE'; + $finalizedOpts[] = $opts['AGGREGATE']; + } + + return $finalizedOpts; + } +} diff --git a/vendor/predis/predis/src/CommunicationException.php b/vendor/predis/predis/src/CommunicationException.php new file mode 100644 index 00000000..8310c30b --- /dev/null +++ b/vendor/predis/predis/src/CommunicationException.php @@ -0,0 +1,80 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis; + +use Predis\Connection\NodeConnectionInterface; + +/** + * Base exception class for network-related errors. + * + * @author Daniele Alessandri + */ +abstract class CommunicationException extends PredisException +{ + private $connection; + + /** + * @param NodeConnectionInterface $connection Connection that generated the exception. + * @param string $message Error message. + * @param int $code Error code. + * @param \Exception $innerException Inner exception for wrapping the original error. + */ + public function __construct( + NodeConnectionInterface $connection, + $message = null, + $code = null, + \Exception $innerException = null + ) { + parent::__construct($message, $code, $innerException); + $this->connection = $connection; + } + + /** + * Gets the connection that generated the exception. + * + * @return NodeConnectionInterface + */ + public function getConnection() + { + return $this->connection; + } + + /** + * Indicates if the receiver should reset the underlying connection. + * + * @return bool + */ + public function shouldResetConnection() + { + return true; + } + + /** + * Helper method to handle exceptions generated by a connection object. + * + * @param CommunicationException $exception Exception. + * + * @throws CommunicationException + */ + public static function handle(CommunicationException $exception) + { + if ($exception->shouldResetConnection()) { + $connection = $exception->getConnection(); + + if ($connection->isConnected()) { + $connection->disconnect(); + } + } + + throw $exception; + } +} diff --git a/vendor/predis/predis/src/Configuration/ClusterOption.php b/vendor/predis/predis/src/Configuration/ClusterOption.php new file mode 100644 index 00000000..9d378ce5 --- /dev/null +++ b/vendor/predis/predis/src/Configuration/ClusterOption.php @@ -0,0 +1,76 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Configuration; + +use Predis\Connection\Aggregate\ClusterInterface; +use Predis\Connection\Aggregate\PredisCluster; +use Predis\Connection\Aggregate\RedisCluster; + +/** + * Configures an aggregate connection used for clustering + * multiple Redis nodes using various implementations with + * different algorithms or strategies. + * + * @author Daniele Alessandri + */ +class ClusterOption implements OptionInterface +{ + /** + * Creates a new cluster connection from on a known descriptive name. + * + * @param OptionsInterface $options Instance of the client options. + * @param string $id Descriptive identifier of the cluster type (`predis`, `redis-cluster`) + * + * @return ClusterInterface|null + */ + protected function createByDescription(OptionsInterface $options, $id) + { + switch ($id) { + case 'predis': + case 'predis-cluster': + return new PredisCluster(); + + case 'redis': + case 'redis-cluster': + return new RedisCluster($options->connections); + + default: + return; + } + } + + /** + * {@inheritdoc} + */ + public function filter(OptionsInterface $options, $value) + { + if (is_string($value)) { + $value = $this->createByDescription($options, $value); + } + + if (!$value instanceof ClusterInterface) { + throw new \InvalidArgumentException( + "An instance of type 'Predis\Connection\Aggregate\ClusterInterface' was expected." + ); + } + + return $value; + } + + /** + * {@inheritdoc} + */ + public function getDefault(OptionsInterface $options) + { + return new PredisCluster(); + } +} diff --git a/vendor/predis/predis/src/Configuration/ConnectionFactoryOption.php b/vendor/predis/predis/src/Configuration/ConnectionFactoryOption.php new file mode 100644 index 00000000..79491acb --- /dev/null +++ b/vendor/predis/predis/src/Configuration/ConnectionFactoryOption.php @@ -0,0 +1,60 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Configuration; + +use Predis\Connection\Factory; +use Predis\Connection\FactoryInterface; + +/** + * Configures a connection factory used by the client to create new connection + * instances for single Redis nodes. + * + * @author Daniele Alessandri + */ +class ConnectionFactoryOption implements OptionInterface +{ + /** + * {@inheritdoc} + */ + public function filter(OptionsInterface $options, $value) + { + if ($value instanceof FactoryInterface) { + return $value; + } elseif (is_array($value)) { + $factory = $this->getDefault($options); + + foreach ($value as $scheme => $initializer) { + $factory->define($scheme, $initializer); + } + + return $factory; + } else { + throw new \InvalidArgumentException( + 'Invalid value provided for the connections option.' + ); + } + } + + /** + * {@inheritdoc} + */ + public function getDefault(OptionsInterface $options) + { + $factory = new Factory(); + + if ($options->defined('parameters')) { + $factory->setDefaultParameters($options->parameters); + } + + return $factory; + } +} diff --git a/vendor/predis/predis/src/Configuration/ExceptionsOption.php b/vendor/predis/predis/src/Configuration/ExceptionsOption.php new file mode 100644 index 00000000..6294dd54 --- /dev/null +++ b/vendor/predis/predis/src/Configuration/ExceptionsOption.php @@ -0,0 +1,37 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Configuration; + +/** + * Configures whether consumers (such as the client) should throw exceptions on + * Redis errors (-ERR responses) or just return instances of error responses. + * + * @author Daniele Alessandri + */ +class ExceptionsOption implements OptionInterface +{ + /** + * {@inheritdoc} + */ + public function filter(OptionsInterface $options, $value) + { + return filter_var($value, FILTER_VALIDATE_BOOLEAN); + } + + /** + * {@inheritdoc} + */ + public function getDefault(OptionsInterface $options) + { + return true; + } +} diff --git a/vendor/predis/predis/src/Configuration/OptionInterface.php b/vendor/predis/predis/src/Configuration/OptionInterface.php new file mode 100644 index 00000000..f4072f9e --- /dev/null +++ b/vendor/predis/predis/src/Configuration/OptionInterface.php @@ -0,0 +1,40 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Configuration; + +/** + * Defines an handler used by Predis\Configuration\Options to filter, validate + * or return default values for a given option. + * + * @author Daniele Alessandri + */ +interface OptionInterface +{ + /** + * Filters and validates the passed value. + * + * @param OptionsInterface $options Options container. + * @param mixed $value Input value. + * + * @return mixed + */ + public function filter(OptionsInterface $options, $value); + + /** + * Returns the default value for the option. + * + * @param OptionsInterface $options Options container. + * + * @return mixed + */ + public function getDefault(OptionsInterface $options); +} diff --git a/vendor/predis/predis/src/Configuration/Options.php b/vendor/predis/predis/src/Configuration/Options.php new file mode 100644 index 00000000..d3150a9d --- /dev/null +++ b/vendor/predis/predis/src/Configuration/Options.php @@ -0,0 +1,122 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Configuration; + +/** + * Manages Predis options with filtering, conversion and lazy initialization of + * values using a mini-DI container approach. + * + * {@inheritdoc} + * + * @author Daniele Alessandri + */ +class Options implements OptionsInterface +{ + protected $input; + protected $options; + protected $handlers; + + /** + * @param array $options Array of options with their values + */ + public function __construct(array $options = array()) + { + $this->input = $options; + $this->options = array(); + $this->handlers = $this->getHandlers(); + } + + /** + * Ensures that the default options are initialized. + * + * @return array + */ + protected function getHandlers() + { + return array( + 'cluster' => 'Predis\Configuration\ClusterOption', + 'connections' => 'Predis\Configuration\ConnectionFactoryOption', + 'exceptions' => 'Predis\Configuration\ExceptionsOption', + 'prefix' => 'Predis\Configuration\PrefixOption', + 'profile' => 'Predis\Configuration\ProfileOption', + 'replication' => 'Predis\Configuration\ReplicationOption', + ); + } + + /** + * {@inheritdoc} + */ + public function getDefault($option) + { + if (isset($this->handlers[$option])) { + $handler = $this->handlers[$option]; + $handler = new $handler(); + + return $handler->getDefault($this); + } + } + + /** + * {@inheritdoc} + */ + public function defined($option) + { + return + array_key_exists($option, $this->options) || + array_key_exists($option, $this->input) + ; + } + + /** + * {@inheritdoc} + */ + public function __isset($option) + { + return ( + array_key_exists($option, $this->options) || + array_key_exists($option, $this->input) + ) && $this->__get($option) !== null; + } + + /** + * {@inheritdoc} + */ + public function __get($option) + { + if (isset($this->options[$option]) || array_key_exists($option, $this->options)) { + return $this->options[$option]; + } + + if (isset($this->input[$option]) || array_key_exists($option, $this->input)) { + $value = $this->input[$option]; + unset($this->input[$option]); + + if (is_object($value) && method_exists($value, '__invoke')) { + $value = $value($this, $option); + } + + if (isset($this->handlers[$option])) { + $handler = $this->handlers[$option]; + $handler = new $handler(); + $value = $handler->filter($this, $value); + } + + return $this->options[$option] = $value; + } + + if (isset($this->handlers[$option])) { + return $this->options[$option] = $this->getDefault($option); + } + + return; + } +} diff --git a/vendor/predis/predis/src/Configuration/OptionsInterface.php b/vendor/predis/predis/src/Configuration/OptionsInterface.php new file mode 100644 index 00000000..87be73a6 --- /dev/null +++ b/vendor/predis/predis/src/Configuration/OptionsInterface.php @@ -0,0 +1,64 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Configuration; + +/** + * Interface defining a container for client options. + * + * @property-read mixed aggregate Custom connection aggregator. + * @property-read mixed cluster Aggregate connection for clustering. + * @property-read mixed connections Connection factory. + * @property-read mixed exceptions Toggles exceptions in client for -ERR responses. + * @property-read mixed prefix Key prefixing strategy using the given prefix. + * @property-read mixed profile Server profile. + * @property-read mixed replication Aggregate connection for replication. + * + * @author Daniele Alessandri + */ +interface OptionsInterface +{ + /** + * Returns the default value for the given option. + * + * @param string $option Name of the option. + * + * @return mixed|null + */ + public function getDefault($option); + + /** + * Checks if the given option has been set by the user upon initialization. + * + * @param string $option Name of the option. + * + * @return bool + */ + public function defined($option); + + /** + * Checks if the given option has been set and does not evaluate to NULL. + * + * @param string $option Name of the option. + * + * @return bool + */ + public function __isset($option); + + /** + * Returns the value of the given option. + * + * @param string $option Name of the option. + * + * @return mixed|null + */ + public function __get($option); +} diff --git a/vendor/predis/predis/src/Configuration/PrefixOption.php b/vendor/predis/predis/src/Configuration/PrefixOption.php new file mode 100644 index 00000000..565a1fa0 --- /dev/null +++ b/vendor/predis/predis/src/Configuration/PrefixOption.php @@ -0,0 +1,44 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Configuration; + +use Predis\Command\Processor\KeyPrefixProcessor; +use Predis\Command\Processor\ProcessorInterface; + +/** + * Configures a command processor that apply the specified prefix string to a + * series of Redis commands considered prefixable. + * + * @author Daniele Alessandri + */ +class PrefixOption implements OptionInterface +{ + /** + * {@inheritdoc} + */ + public function filter(OptionsInterface $options, $value) + { + if ($value instanceof ProcessorInterface) { + return $value; + } + + return new KeyPrefixProcessor($value); + } + + /** + * {@inheritdoc} + */ + public function getDefault(OptionsInterface $options) + { + // NOOP + } +} diff --git a/vendor/predis/predis/src/Configuration/ProfileOption.php b/vendor/predis/predis/src/Configuration/ProfileOption.php new file mode 100644 index 00000000..e841831f --- /dev/null +++ b/vendor/predis/predis/src/Configuration/ProfileOption.php @@ -0,0 +1,69 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Configuration; + +use Predis\Profile\Factory; +use Predis\Profile\ProfileInterface; +use Predis\Profile\RedisProfile; + +/** + * Configures the server profile to be used by the client to create command + * instances depending on the specified version of the Redis server. + * + * @author Daniele Alessandri + */ +class ProfileOption implements OptionInterface +{ + /** + * Sets the commands processors that need to be applied to the profile. + * + * @param OptionsInterface $options Client options. + * @param ProfileInterface $profile Server profile. + */ + protected function setProcessors(OptionsInterface $options, ProfileInterface $profile) + { + if (isset($options->prefix) && $profile instanceof RedisProfile) { + // NOTE: directly using __get('prefix') is actually a workaround for + // HHVM 2.3.0. It's correct and respects the options interface, it's + // just ugly. We will remove this hack when HHVM will fix re-entrant + // calls to __get() once and for all. + + $profile->setProcessor($options->__get('prefix')); + } + } + + /** + * {@inheritdoc} + */ + public function filter(OptionsInterface $options, $value) + { + if (is_string($value)) { + $value = Factory::get($value); + $this->setProcessors($options, $value); + } elseif (!$value instanceof ProfileInterface) { + throw new \InvalidArgumentException('Invalid value for the profile option.'); + } + + return $value; + } + + /** + * {@inheritdoc} + */ + public function getDefault(OptionsInterface $options) + { + $profile = Factory::getDefault(); + $this->setProcessors($options, $profile); + + return $profile; + } +} diff --git a/vendor/predis/predis/src/Configuration/ReplicationOption.php b/vendor/predis/predis/src/Configuration/ReplicationOption.php new file mode 100644 index 00000000..9d42619a --- /dev/null +++ b/vendor/predis/predis/src/Configuration/ReplicationOption.php @@ -0,0 +1,75 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Configuration; + +use Predis\Connection\Aggregate\MasterSlaveReplication; +use Predis\Connection\Aggregate\ReplicationInterface; +use Predis\Connection\Aggregate\SentinelReplication; + +/** + * Configures an aggregate connection used for master/slave replication among + * multiple Redis nodes. + * + * @author Daniele Alessandri + */ +class ReplicationOption implements OptionInterface +{ + /** + * {@inheritdoc} + * + * @todo There's more code than needed due to a bug in filter_var() as + * discussed here https://bugs.php.net/bug.php?id=49510 and different + * behaviours when encountering NULL values on PHP 5.3. + */ + public function filter(OptionsInterface $options, $value) + { + if ($value instanceof ReplicationInterface) { + return $value; + } + + if (is_bool($value) || $value === null) { + return $value ? $this->getDefault($options) : null; + } + + if ($value === 'sentinel') { + return function ($sentinels, $options) { + return new SentinelReplication($options->service, $sentinels, $options->connections); + }; + } + + if ( + !is_object($value) && + null !== $asbool = filter_var($value, FILTER_VALIDATE_BOOLEAN, FILTER_NULL_ON_FAILURE) + ) { + return $asbool ? $this->getDefault($options) : null; + } + + throw new \InvalidArgumentException( + "An instance of type 'Predis\Connection\Aggregate\ReplicationInterface' was expected." + ); + } + + /** + * {@inheritdoc} + */ + public function getDefault(OptionsInterface $options) + { + $replication = new MasterSlaveReplication(); + + if ($options->autodiscovery) { + $replication->setConnectionFactory($options->connections); + $replication->setAutoDiscovery(true); + } + + return $replication; + } +} diff --git a/vendor/predis/predis/src/Connection/AbstractConnection.php b/vendor/predis/predis/src/Connection/AbstractConnection.php new file mode 100644 index 00000000..6d561872 --- /dev/null +++ b/vendor/predis/predis/src/Connection/AbstractConnection.php @@ -0,0 +1,226 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Connection; + +use Predis\Command\CommandInterface; +use Predis\CommunicationException; +use Predis\Protocol\ProtocolException; + +/** + * Base class with the common logic used by connection classes to communicate + * with Redis. + * + * @author Daniele Alessandri + */ +abstract class AbstractConnection implements NodeConnectionInterface +{ + private $resource; + private $cachedId; + + protected $parameters; + protected $initCommands = array(); + + /** + * @param ParametersInterface $parameters Initialization parameters for the connection. + */ + public function __construct(ParametersInterface $parameters) + { + $this->parameters = $this->assertParameters($parameters); + } + + /** + * Disconnects from the server and destroys the underlying resource when + * PHP's garbage collector kicks in. + */ + public function __destruct() + { + $this->disconnect(); + } + + /** + * Checks some of the parameters used to initialize the connection. + * + * @param ParametersInterface $parameters Initialization parameters for the connection. + * + * @throws \InvalidArgumentException + * + * @return ParametersInterface + */ + abstract protected function assertParameters(ParametersInterface $parameters); + + /** + * Creates the underlying resource used to communicate with Redis. + * + * @return mixed + */ + abstract protected function createResource(); + + /** + * {@inheritdoc} + */ + public function isConnected() + { + return isset($this->resource); + } + + /** + * {@inheritdoc} + */ + public function connect() + { + if (!$this->isConnected()) { + $this->resource = $this->createResource(); + + return true; + } + + return false; + } + + /** + * {@inheritdoc} + */ + public function disconnect() + { + unset($this->resource); + } + + /** + * {@inheritdoc} + */ + public function addConnectCommand(CommandInterface $command) + { + $this->initCommands[] = $command; + } + + /** + * {@inheritdoc} + */ + public function executeCommand(CommandInterface $command) + { + $this->writeRequest($command); + + return $this->readResponse($command); + } + + /** + * {@inheritdoc} + */ + public function readResponse(CommandInterface $command) + { + return $this->read(); + } + + /** + * Helper method that returns an exception message augmented with useful + * details from the connection parameters. + * + * @param string $message Error message. + * + * @return string + */ + private function createExceptionMessage($message) + { + $parameters = $this->parameters; + + if ($parameters->scheme === 'unix') { + return "$message [$parameters->scheme:$parameters->path]"; + } + + if (filter_var($parameters->host, FILTER_VALIDATE_IP, FILTER_FLAG_IPV6)) { + return "$message [$parameters->scheme://[$parameters->host]:$parameters->port]"; + } + + return "$message [$parameters->scheme://$parameters->host:$parameters->port]"; + } + + /** + * Helper method to handle connection errors. + * + * @param string $message Error message. + * @param int $code Error code. + */ + protected function onConnectionError($message, $code = null) + { + CommunicationException::handle( + new ConnectionException($this, static::createExceptionMessage($message), $code) + ); + } + + /** + * Helper method to handle protocol errors. + * + * @param string $message Error message. + */ + protected function onProtocolError($message) + { + CommunicationException::handle( + new ProtocolException($this, static::createExceptionMessage($message)) + ); + } + + /** + * {@inheritdoc} + */ + public function getResource() + { + if (isset($this->resource)) { + return $this->resource; + } + + $this->connect(); + + return $this->resource; + } + + /** + * {@inheritdoc} + */ + public function getParameters() + { + return $this->parameters; + } + + /** + * Gets an identifier for the connection. + * + * @return string + */ + protected function getIdentifier() + { + if ($this->parameters->scheme === 'unix') { + return $this->parameters->path; + } + + return "{$this->parameters->host}:{$this->parameters->port}"; + } + + /** + * {@inheritdoc} + */ + public function __toString() + { + if (!isset($this->cachedId)) { + $this->cachedId = $this->getIdentifier(); + } + + return $this->cachedId; + } + + /** + * {@inheritdoc} + */ + public function __sleep() + { + return array('parameters', 'initCommands'); + } +} diff --git a/vendor/predis/predis/src/Connection/Aggregate/ClusterInterface.php b/vendor/predis/predis/src/Connection/Aggregate/ClusterInterface.php new file mode 100644 index 00000000..791e836c --- /dev/null +++ b/vendor/predis/predis/src/Connection/Aggregate/ClusterInterface.php @@ -0,0 +1,24 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Connection\Aggregate; + +use Predis\Connection\AggregateConnectionInterface; + +/** + * Defines a cluster of Redis servers formed by aggregating multiple connection + * instances to single Redis nodes. + * + * @author Daniele Alessandri + */ +interface ClusterInterface extends AggregateConnectionInterface +{ +} diff --git a/vendor/predis/predis/src/Connection/Aggregate/MasterSlaveReplication.php b/vendor/predis/predis/src/Connection/Aggregate/MasterSlaveReplication.php new file mode 100644 index 00000000..f90d762b --- /dev/null +++ b/vendor/predis/predis/src/Connection/Aggregate/MasterSlaveReplication.php @@ -0,0 +1,509 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Connection\Aggregate; + +use Predis\ClientException; +use Predis\Command\CommandInterface; +use Predis\Command\RawCommand; +use Predis\Connection\ConnectionException; +use Predis\Connection\FactoryInterface; +use Predis\Connection\NodeConnectionInterface; +use Predis\Replication\MissingMasterException; +use Predis\Replication\ReplicationStrategy; +use Predis\Response\ErrorInterface as ResponseErrorInterface; + +/** + * Aggregate connection handling replication of Redis nodes configured in a + * single master / multiple slaves setup. + * + * @author Daniele Alessandri + */ +class MasterSlaveReplication implements ReplicationInterface +{ + /** + * @var ReplicationStrategy + */ + protected $strategy; + + /** + * @var NodeConnectionInterface + */ + protected $master; + + /** + * @var NodeConnectionInterface[] + */ + protected $slaves = array(); + + /** + * @var NodeConnectionInterface + */ + protected $current; + + /** + * @var bool + */ + protected $autoDiscovery = false; + + /** + * @var FactoryInterface + */ + protected $connectionFactory; + + /** + * {@inheritdoc} + */ + public function __construct(ReplicationStrategy $strategy = null) + { + $this->strategy = $strategy ?: new ReplicationStrategy(); + } + + /** + * Configures the automatic discovery of the replication configuration on failure. + * + * @param bool $value Enable or disable auto discovery. + */ + public function setAutoDiscovery($value) + { + if (!$this->connectionFactory) { + throw new ClientException('Automatic discovery requires a connection factory'); + } + + $this->autoDiscovery = (bool) $value; + } + + /** + * Sets the connection factory used to create the connections by the auto + * discovery procedure. + * + * @param FactoryInterface $connectionFactory Connection factory instance. + */ + public function setConnectionFactory(FactoryInterface $connectionFactory) + { + $this->connectionFactory = $connectionFactory; + } + + /** + * Resets the connection state. + */ + protected function reset() + { + $this->current = null; + } + + /** + * {@inheritdoc} + */ + public function add(NodeConnectionInterface $connection) + { + $alias = $connection->getParameters()->alias; + + if ($alias === 'master') { + $this->master = $connection; + } else { + $this->slaves[$alias ?: "slave-$connection"] = $connection; + } + + $this->reset(); + } + + /** + * {@inheritdoc} + */ + public function remove(NodeConnectionInterface $connection) + { + if ($connection->getParameters()->alias === 'master') { + $this->master = null; + $this->reset(); + + return true; + } else { + if (($id = array_search($connection, $this->slaves, true)) !== false) { + unset($this->slaves[$id]); + $this->reset(); + + return true; + } + } + + return false; + } + + /** + * {@inheritdoc} + */ + public function getConnection(CommandInterface $command) + { + if (!$this->current) { + if ($this->strategy->isReadOperation($command) && $slave = $this->pickSlave()) { + $this->current = $slave; + } else { + $this->current = $this->getMasterOrDie(); + } + + return $this->current; + } + + if ($this->current === $master = $this->getMasterOrDie()) { + return $master; + } + + if (!$this->strategy->isReadOperation($command) || !$this->slaves) { + $this->current = $master; + } + + return $this->current; + } + + /** + * {@inheritdoc} + */ + public function getConnectionById($connectionId) + { + if ($connectionId === 'master') { + return $this->master; + } + + if (isset($this->slaves[$connectionId])) { + return $this->slaves[$connectionId]; + } + + return; + } + + /** + * {@inheritdoc} + */ + public function switchTo($connection) + { + if (!$connection instanceof NodeConnectionInterface) { + $connection = $this->getConnectionById($connection); + } + + if (!$connection) { + throw new \InvalidArgumentException('Invalid connection or connection not found.'); + } + + if ($connection !== $this->master && !in_array($connection, $this->slaves, true)) { + throw new \InvalidArgumentException('Invalid connection or connection not found.'); + } + + $this->current = $connection; + } + + /** + * Switches to the master server. + */ + public function switchToMaster() + { + $this->switchTo('master'); + } + + /** + * Switches to a random slave server. + */ + public function switchToSlave() + { + $connection = $this->pickSlave(); + $this->switchTo($connection); + } + + /** + * {@inheritdoc} + */ + public function getCurrent() + { + return $this->current; + } + + /** + * {@inheritdoc} + */ + public function getMaster() + { + return $this->master; + } + + /** + * Returns the connection associated to the master server. + * + * @return NodeConnectionInterface + */ + private function getMasterOrDie() + { + if (!$connection = $this->getMaster()) { + throw new MissingMasterException('No master server available for replication'); + } + + return $connection; + } + + /** + * {@inheritdoc} + */ + public function getSlaves() + { + return array_values($this->slaves); + } + + /** + * Returns the underlying replication strategy. + * + * @return ReplicationStrategy + */ + public function getReplicationStrategy() + { + return $this->strategy; + } + + /** + * Returns a random slave. + * + * @return NodeConnectionInterface + */ + protected function pickSlave() + { + if ($this->slaves) { + return $this->slaves[array_rand($this->slaves)]; + } + } + + /** + * {@inheritdoc} + */ + public function isConnected() + { + return $this->current ? $this->current->isConnected() : false; + } + + /** + * {@inheritdoc} + */ + public function connect() + { + if (!$this->current) { + if (!$this->current = $this->pickSlave()) { + if (!$this->current = $this->getMaster()) { + throw new ClientException('No available connection for replication'); + } + } + } + + $this->current->connect(); + } + + /** + * {@inheritdoc} + */ + public function disconnect() + { + if ($this->master) { + $this->master->disconnect(); + } + + foreach ($this->slaves as $connection) { + $connection->disconnect(); + } + } + + /** + * Handles response from INFO. + * + * @param string $response + * + * @return array + */ + private function handleInfoResponse($response) + { + $info = array(); + + foreach (preg_split('/\r?\n/', $response) as $row) { + if (strpos($row, ':') === false) { + continue; + } + + list($k, $v) = explode(':', $row, 2); + $info[$k] = $v; + } + + return $info; + } + + /** + * Fetches the replication configuration from one of the servers. + */ + public function discover() + { + if (!$this->connectionFactory) { + throw new ClientException('Discovery requires a connection factory'); + } + + RETRY_FETCH: { + try { + if ($connection = $this->getMaster()) { + $this->discoverFromMaster($connection, $this->connectionFactory); + } elseif ($connection = $this->pickSlave()) { + $this->discoverFromSlave($connection, $this->connectionFactory); + } else { + throw new ClientException('No connection available for discovery'); + } + } catch (ConnectionException $exception) { + $this->remove($connection); + goto RETRY_FETCH; + } + } + } + + /** + * Discovers the replication configuration by contacting the master node. + * + * @param NodeConnectionInterface $connection Connection to the master node. + * @param FactoryInterface $connectionFactory Connection factory instance. + */ + protected function discoverFromMaster(NodeConnectionInterface $connection, FactoryInterface $connectionFactory) + { + $response = $connection->executeCommand(RawCommand::create('INFO', 'REPLICATION')); + $replication = $this->handleInfoResponse($response); + + if ($replication['role'] !== 'master') { + throw new ClientException("Role mismatch (expected master, got slave) [$connection]"); + } + + $this->slaves = array(); + + foreach ($replication as $k => $v) { + $parameters = null; + + if (strpos($k, 'slave') === 0 && preg_match('/ip=(?P.*),port=(?P\d+)/', $v, $parameters)) { + $slaveConnection = $connectionFactory->create(array( + 'host' => $parameters['host'], + 'port' => $parameters['port'], + )); + + $this->add($slaveConnection); + } + } + } + + /** + * Discovers the replication configuration by contacting one of the slaves. + * + * @param NodeConnectionInterface $connection Connection to one of the slaves. + * @param FactoryInterface $connectionFactory Connection factory instance. + */ + protected function discoverFromSlave(NodeConnectionInterface $connection, FactoryInterface $connectionFactory) + { + $response = $connection->executeCommand(RawCommand::create('INFO', 'REPLICATION')); + $replication = $this->handleInfoResponse($response); + + if ($replication['role'] !== 'slave') { + throw new ClientException("Role mismatch (expected slave, got master) [$connection]"); + } + + $masterConnection = $connectionFactory->create(array( + 'host' => $replication['master_host'], + 'port' => $replication['master_port'], + 'alias' => 'master', + )); + + $this->add($masterConnection); + + $this->discoverFromMaster($masterConnection, $connectionFactory); + } + + /** + * Retries the execution of a command upon slave failure. + * + * @param CommandInterface $command Command instance. + * @param string $method Actual method. + * + * @return mixed + */ + private function retryCommandOnFailure(CommandInterface $command, $method) + { + RETRY_COMMAND: { + try { + $connection = $this->getConnection($command); + $response = $connection->$method($command); + + if ($response instanceof ResponseErrorInterface && $response->getErrorType() === 'LOADING') { + throw new ConnectionException($connection, "Redis is loading the dataset in memory [$connection]"); + } + } catch (ConnectionException $exception) { + $connection = $exception->getConnection(); + $connection->disconnect(); + + if ($connection === $this->master && !$this->autoDiscovery) { + // Throw immediately when master connection is failing, even + // when the command represents a read-only operation, unless + // automatic discovery has been enabled. + throw $exception; + } else { + // Otherwise remove the failing slave and attempt to execute + // the command again on one of the remaining slaves... + $this->remove($connection); + } + + // ... that is, unless we have no more connections to use. + if (!$this->slaves && !$this->master) { + throw $exception; + } elseif ($this->autoDiscovery) { + $this->discover(); + } + + goto RETRY_COMMAND; + } catch (MissingMasterException $exception) { + if ($this->autoDiscovery) { + $this->discover(); + } else { + throw $exception; + } + + goto RETRY_COMMAND; + } + } + + return $response; + } + + /** + * {@inheritdoc} + */ + public function writeRequest(CommandInterface $command) + { + $this->retryCommandOnFailure($command, __FUNCTION__); + } + + /** + * {@inheritdoc} + */ + public function readResponse(CommandInterface $command) + { + return $this->retryCommandOnFailure($command, __FUNCTION__); + } + + /** + * {@inheritdoc} + */ + public function executeCommand(CommandInterface $command) + { + return $this->retryCommandOnFailure($command, __FUNCTION__); + } + + /** + * {@inheritdoc} + */ + public function __sleep() + { + return array('master', 'slaves', 'strategy'); + } +} diff --git a/vendor/predis/predis/src/Connection/Aggregate/PredisCluster.php b/vendor/predis/predis/src/Connection/Aggregate/PredisCluster.php new file mode 100644 index 00000000..1d100762 --- /dev/null +++ b/vendor/predis/predis/src/Connection/Aggregate/PredisCluster.php @@ -0,0 +1,235 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Connection\Aggregate; + +use Predis\Cluster\PredisStrategy; +use Predis\Cluster\StrategyInterface; +use Predis\Command\CommandInterface; +use Predis\Connection\NodeConnectionInterface; +use Predis\NotSupportedException; + +/** + * Abstraction for a cluster of aggregate connections to various Redis servers + * implementing client-side sharding based on pluggable distribution strategies. + * + * @author Daniele Alessandri + * + * @todo Add the ability to remove connections from pool. + */ +class PredisCluster implements ClusterInterface, \IteratorAggregate, \Countable +{ + private $pool; + private $strategy; + private $distributor; + + /** + * @param StrategyInterface $strategy Optional cluster strategy. + */ + public function __construct(StrategyInterface $strategy = null) + { + $this->pool = array(); + $this->strategy = $strategy ?: new PredisStrategy(); + $this->distributor = $this->strategy->getDistributor(); + } + + /** + * {@inheritdoc} + */ + public function isConnected() + { + foreach ($this->pool as $connection) { + if ($connection->isConnected()) { + return true; + } + } + + return false; + } + + /** + * {@inheritdoc} + */ + public function connect() + { + foreach ($this->pool as $connection) { + $connection->connect(); + } + } + + /** + * {@inheritdoc} + */ + public function disconnect() + { + foreach ($this->pool as $connection) { + $connection->disconnect(); + } + } + + /** + * {@inheritdoc} + */ + public function add(NodeConnectionInterface $connection) + { + $parameters = $connection->getParameters(); + + if (isset($parameters->alias)) { + $this->pool[$parameters->alias] = $connection; + } else { + $this->pool[] = $connection; + } + + $weight = isset($parameters->weight) ? $parameters->weight : null; + $this->distributor->add($connection, $weight); + } + + /** + * {@inheritdoc} + */ + public function remove(NodeConnectionInterface $connection) + { + if (($id = array_search($connection, $this->pool, true)) !== false) { + unset($this->pool[$id]); + $this->distributor->remove($connection); + + return true; + } + + return false; + } + + /** + * Removes a connection instance using its alias or index. + * + * @param string $connectionID Alias or index of a connection. + * + * @return bool Returns true if the connection was in the pool. + */ + public function removeById($connectionID) + { + if ($connection = $this->getConnectionById($connectionID)) { + return $this->remove($connection); + } + + return false; + } + + /** + * {@inheritdoc} + */ + public function getConnection(CommandInterface $command) + { + $slot = $this->strategy->getSlot($command); + + if (!isset($slot)) { + throw new NotSupportedException( + "Cannot use '{$command->getId()}' over clusters of connections." + ); + } + + $node = $this->distributor->getBySlot($slot); + + return $node; + } + + /** + * {@inheritdoc} + */ + public function getConnectionById($connectionID) + { + return isset($this->pool[$connectionID]) ? $this->pool[$connectionID] : null; + } + + /** + * Retrieves a connection instance from the cluster using a key. + * + * @param string $key Key string. + * + * @return NodeConnectionInterface + */ + public function getConnectionByKey($key) + { + $hash = $this->strategy->getSlotByKey($key); + $node = $this->distributor->getBySlot($hash); + + return $node; + } + + /** + * Returns the underlying command hash strategy used to hash commands by + * using keys found in their arguments. + * + * @return StrategyInterface + */ + public function getClusterStrategy() + { + return $this->strategy; + } + + /** + * {@inheritdoc} + */ + public function count() + { + return count($this->pool); + } + + /** + * {@inheritdoc} + */ + public function getIterator() + { + return new \ArrayIterator($this->pool); + } + + /** + * {@inheritdoc} + */ + public function writeRequest(CommandInterface $command) + { + $this->getConnection($command)->writeRequest($command); + } + + /** + * {@inheritdoc} + */ + public function readResponse(CommandInterface $command) + { + return $this->getConnection($command)->readResponse($command); + } + + /** + * {@inheritdoc} + */ + public function executeCommand(CommandInterface $command) + { + return $this->getConnection($command)->executeCommand($command); + } + + /** + * Executes the specified Redis command on all the nodes of a cluster. + * + * @param CommandInterface $command A Redis command. + * + * @return array + */ + public function executeCommandOnNodes(CommandInterface $command) + { + $responses = array(); + + foreach ($this->pool as $connection) { + $responses[] = $connection->executeCommand($command); + } + + return $responses; + } +} diff --git a/vendor/predis/predis/src/Connection/Aggregate/RedisCluster.php b/vendor/predis/predis/src/Connection/Aggregate/RedisCluster.php new file mode 100644 index 00000000..749482f7 --- /dev/null +++ b/vendor/predis/predis/src/Connection/Aggregate/RedisCluster.php @@ -0,0 +1,673 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Connection\Aggregate; + +use Predis\ClientException; +use Predis\Cluster\RedisStrategy as RedisClusterStrategy; +use Predis\Cluster\StrategyInterface; +use Predis\Command\CommandInterface; +use Predis\Command\RawCommand; +use Predis\Connection\ConnectionException; +use Predis\Connection\FactoryInterface; +use Predis\Connection\NodeConnectionInterface; +use Predis\NotSupportedException; +use Predis\Response\ErrorInterface as ErrorResponseInterface; + +/** + * Abstraction for a Redis-backed cluster of nodes (Redis >= 3.0.0). + * + * This connection backend offers smart support for redis-cluster by handling + * automatic slots map (re)generation upon -MOVED or -ASK responses returned by + * Redis when redirecting a client to a different node. + * + * The cluster can be pre-initialized using only a subset of the actual nodes in + * the cluster, Predis will do the rest by adjusting the slots map and creating + * the missing underlying connection instances on the fly. + * + * It is possible to pre-associate connections to a slots range with the "slots" + * parameter in the form "$first-$last". This can greatly reduce runtime node + * guessing and redirections. + * + * It is also possible to ask for the full and updated slots map directly to one + * of the nodes and optionally enable such a behaviour upon -MOVED redirections. + * Asking for the cluster configuration to Redis is actually done by issuing a + * CLUSTER SLOTS command to a random node in the pool. + * + * @author Daniele Alessandri + */ +class RedisCluster implements ClusterInterface, \IteratorAggregate, \Countable +{ + private $useClusterSlots = true; + private $pool = array(); + private $slots = array(); + private $slotsMap; + private $strategy; + private $connections; + private $retryLimit = 5; + + /** + * @param FactoryInterface $connections Optional connection factory. + * @param StrategyInterface $strategy Optional cluster strategy. + */ + public function __construct( + FactoryInterface $connections, + StrategyInterface $strategy = null + ) { + $this->connections = $connections; + $this->strategy = $strategy ?: new RedisClusterStrategy(); + } + + /** + * Sets the maximum number of retries for commands upon server failure. + * + * -1 = unlimited retry attempts + * 0 = no retry attempts (fails immediatly) + * n = fail only after n retry attempts + * + * @param int $retry Number of retry attempts. + */ + public function setRetryLimit($retry) + { + $this->retryLimit = (int) $retry; + } + + /** + * {@inheritdoc} + */ + public function isConnected() + { + foreach ($this->pool as $connection) { + if ($connection->isConnected()) { + return true; + } + } + + return false; + } + + /** + * {@inheritdoc} + */ + public function connect() + { + if ($connection = $this->getRandomConnection()) { + $connection->connect(); + } + } + + /** + * {@inheritdoc} + */ + public function disconnect() + { + foreach ($this->pool as $connection) { + $connection->disconnect(); + } + } + + /** + * {@inheritdoc} + */ + public function add(NodeConnectionInterface $connection) + { + $this->pool[(string) $connection] = $connection; + unset($this->slotsMap); + } + + /** + * {@inheritdoc} + */ + public function remove(NodeConnectionInterface $connection) + { + if (false !== $id = array_search($connection, $this->pool, true)) { + unset( + $this->pool[$id], + $this->slotsMap + ); + + $this->slots = array_diff($this->slots, array($connection)); + + return true; + } + + return false; + } + + /** + * Removes a connection instance by using its identifier. + * + * @param string $connectionID Connection identifier. + * + * @return bool True if the connection was in the pool. + */ + public function removeById($connectionID) + { + if (isset($this->pool[$connectionID])) { + unset( + $this->pool[$connectionID], + $this->slotsMap + ); + + return true; + } + + return false; + } + + /** + * Generates the current slots map by guessing the cluster configuration out + * of the connection parameters of the connections in the pool. + * + * Generation is based on the same algorithm used by Redis to generate the + * cluster, so it is most effective when all of the connections supplied on + * initialization have the "slots" parameter properly set accordingly to the + * current cluster configuration. + * + * @return array + */ + public function buildSlotsMap() + { + $this->slotsMap = array(); + + foreach ($this->pool as $connectionID => $connection) { + $parameters = $connection->getParameters(); + + if (!isset($parameters->slots)) { + continue; + } + + foreach (explode(',', $parameters->slots) as $slotRange) { + $slots = explode('-', $slotRange, 2); + + if (!isset($slots[1])) { + $slots[1] = $slots[0]; + } + + $this->setSlots($slots[0], $slots[1], $connectionID); + } + } + + return $this->slotsMap; + } + + /** + * Queries the specified node of the cluster to fetch the updated slots map. + * + * When the connection fails, this method tries to execute the same command + * on a different connection picked at random from the pool of known nodes, + * up until the retry limit is reached. + * + * @param NodeConnectionInterface $connection Connection to a node of the cluster. + * + * @return mixed + */ + private function queryClusterNodeForSlotsMap(NodeConnectionInterface $connection) + { + $retries = 0; + $command = RawCommand::create('CLUSTER', 'SLOTS'); + + RETRY_COMMAND: { + try { + $response = $connection->executeCommand($command); + } catch (ConnectionException $exception) { + $connection = $exception->getConnection(); + $connection->disconnect(); + + $this->remove($connection); + + if ($retries === $this->retryLimit) { + throw $exception; + } + + if (!$connection = $this->getRandomConnection()) { + throw new ClientException('No connections left in the pool for `CLUSTER SLOTS`'); + } + + ++$retries; + goto RETRY_COMMAND; + } + } + + return $response; + } + + /** + * Generates an updated slots map fetching the cluster configuration using + * the CLUSTER SLOTS command against the specified node or a random one from + * the pool. + * + * @param NodeConnectionInterface $connection Optional connection instance. + * + * @return array + */ + public function askSlotsMap(NodeConnectionInterface $connection = null) + { + if (!$connection && !$connection = $this->getRandomConnection()) { + return array(); + } + + $this->resetSlotsMap(); + + $response = $this->queryClusterNodeForSlotsMap($connection); + + foreach ($response as $slots) { + // We only support master servers for now, so we ignore subsequent + // elements in the $slots array identifying slaves. + list($start, $end, $master) = $slots; + + if ($master[0] === '') { + $this->setSlots($start, $end, (string) $connection); + } else { + $this->setSlots($start, $end, "{$master[0]}:{$master[1]}"); + } + } + + return $this->slotsMap; + } + + /** + * Resets the slots map cache. + */ + public function resetSlotsMap() + { + $this->slotsMap = array(); + } + + /** + * Returns the current slots map for the cluster. + * + * The order of the returned $slot => $server dictionary is not guaranteed. + * + * @return array + */ + public function getSlotsMap() + { + if (!isset($this->slotsMap)) { + $this->slotsMap = array(); + } + + return $this->slotsMap; + } + + /** + * Pre-associates a connection to a slots range to avoid runtime guessing. + * + * @param int $first Initial slot of the range. + * @param int $last Last slot of the range. + * @param NodeConnectionInterface|string $connection ID or connection instance. + * + * @throws \OutOfBoundsException + */ + public function setSlots($first, $last, $connection) + { + if ($first < 0x0000 || $first > 0x3FFF || + $last < 0x0000 || $last > 0x3FFF || + $last < $first + ) { + throw new \OutOfBoundsException( + "Invalid slot range for $connection: [$first-$last]." + ); + } + + $slots = array_fill($first, $last - $first + 1, (string) $connection); + $this->slotsMap = $this->getSlotsMap() + $slots; + } + + /** + * Guesses the correct node associated to a given slot using a precalculated + * slots map, falling back to the same logic used by Redis to initialize a + * cluster (best-effort). + * + * @param int $slot Slot index. + * + * @return string Connection ID. + */ + protected function guessNode($slot) + { + if (!$this->pool) { + throw new ClientException('No connections available in the pool'); + } + + if (!isset($this->slotsMap)) { + $this->buildSlotsMap(); + } + + if (isset($this->slotsMap[$slot])) { + return $this->slotsMap[$slot]; + } + + $count = count($this->pool); + $index = min((int) ($slot / (int) (16384 / $count)), $count - 1); + $nodes = array_keys($this->pool); + + return $nodes[$index]; + } + + /** + * Creates a new connection instance from the given connection ID. + * + * @param string $connectionID Identifier for the connection. + * + * @return NodeConnectionInterface + */ + protected function createConnection($connectionID) + { + $separator = strrpos($connectionID, ':'); + + return $this->connections->create(array( + 'host' => substr($connectionID, 0, $separator), + 'port' => substr($connectionID, $separator + 1), + )); + } + + /** + * {@inheritdoc} + */ + public function getConnection(CommandInterface $command) + { + $slot = $this->strategy->getSlot($command); + + if (!isset($slot)) { + throw new NotSupportedException( + "Cannot use '{$command->getId()}' with redis-cluster." + ); + } + + if (isset($this->slots[$slot])) { + return $this->slots[$slot]; + } else { + return $this->getConnectionBySlot($slot); + } + } + + /** + * Returns the connection currently associated to a given slot. + * + * @param int $slot Slot index. + * + * @throws \OutOfBoundsException + * + * @return NodeConnectionInterface + */ + public function getConnectionBySlot($slot) + { + if ($slot < 0x0000 || $slot > 0x3FFF) { + throw new \OutOfBoundsException("Invalid slot [$slot]."); + } + + if (isset($this->slots[$slot])) { + return $this->slots[$slot]; + } + + $connectionID = $this->guessNode($slot); + + if (!$connection = $this->getConnectionById($connectionID)) { + $connection = $this->createConnection($connectionID); + $this->pool[$connectionID] = $connection; + } + + return $this->slots[$slot] = $connection; + } + + /** + * {@inheritdoc} + */ + public function getConnectionById($connectionID) + { + if (isset($this->pool[$connectionID])) { + return $this->pool[$connectionID]; + } + } + + /** + * Returns a random connection from the pool. + * + * @return NodeConnectionInterface|null + */ + protected function getRandomConnection() + { + if ($this->pool) { + return $this->pool[array_rand($this->pool)]; + } + } + + /** + * Permanently associates the connection instance to a new slot. + * The connection is added to the connections pool if not yet included. + * + * @param NodeConnectionInterface $connection Connection instance. + * @param int $slot Target slot index. + */ + protected function move(NodeConnectionInterface $connection, $slot) + { + $this->pool[(string) $connection] = $connection; + $this->slots[(int) $slot] = $connection; + } + + /** + * Handles -ERR responses returned by Redis. + * + * @param CommandInterface $command Command that generated the -ERR response. + * @param ErrorResponseInterface $error Redis error response object. + * + * @return mixed + */ + protected function onErrorResponse(CommandInterface $command, ErrorResponseInterface $error) + { + $details = explode(' ', $error->getMessage(), 2); + + switch ($details[0]) { + case 'MOVED': + return $this->onMovedResponse($command, $details[1]); + + case 'ASK': + return $this->onAskResponse($command, $details[1]); + + default: + return $error; + } + } + + /** + * Handles -MOVED responses by executing again the command against the node + * indicated by the Redis response. + * + * @param CommandInterface $command Command that generated the -MOVED response. + * @param string $details Parameters of the -MOVED response. + * + * @return mixed + */ + protected function onMovedResponse(CommandInterface $command, $details) + { + list($slot, $connectionID) = explode(' ', $details, 2); + + if (!$connection = $this->getConnectionById($connectionID)) { + $connection = $this->createConnection($connectionID); + } + + if ($this->useClusterSlots) { + $this->askSlotsMap($connection); + } + + $this->move($connection, $slot); + $response = $this->executeCommand($command); + + return $response; + } + + /** + * Handles -ASK responses by executing again the command against the node + * indicated by the Redis response. + * + * @param CommandInterface $command Command that generated the -ASK response. + * @param string $details Parameters of the -ASK response. + * + * @return mixed + */ + protected function onAskResponse(CommandInterface $command, $details) + { + list($slot, $connectionID) = explode(' ', $details, 2); + + if (!$connection = $this->getConnectionById($connectionID)) { + $connection = $this->createConnection($connectionID); + } + + $connection->executeCommand(RawCommand::create('ASKING')); + $response = $connection->executeCommand($command); + + return $response; + } + + /** + * Ensures that a command is executed one more time on connection failure. + * + * The connection to the node that generated the error is evicted from the + * pool before trying to fetch an updated slots map from another node. If + * the new slots map points to an unreachable server the client gives up and + * throws the exception as the nodes participating in the cluster may still + * have to agree that something changed in the configuration of the cluster. + * + * @param CommandInterface $command Command instance. + * @param string $method Actual method. + * + * @return mixed + */ + private function retryCommandOnFailure(CommandInterface $command, $method) + { + $failure = false; + + RETRY_COMMAND: { + try { + $response = $this->getConnection($command)->$method($command); + } catch (ConnectionException $exception) { + $connection = $exception->getConnection(); + $connection->disconnect(); + + $this->remove($connection); + + if ($failure) { + throw $exception; + } elseif ($this->useClusterSlots) { + $this->askSlotsMap(); + } + + $failure = true; + + goto RETRY_COMMAND; + } + } + + return $response; + } + + /** + * {@inheritdoc} + */ + public function writeRequest(CommandInterface $command) + { + $this->retryCommandOnFailure($command, __FUNCTION__); + } + + /** + * {@inheritdoc} + */ + public function readResponse(CommandInterface $command) + { + return $this->retryCommandOnFailure($command, __FUNCTION__); + } + + /** + * {@inheritdoc} + */ + public function executeCommand(CommandInterface $command) + { + $response = $this->retryCommandOnFailure($command, __FUNCTION__); + + if ($response instanceof ErrorResponseInterface) { + return $this->onErrorResponse($command, $response); + } + + return $response; + } + + /** + * {@inheritdoc} + */ + public function count() + { + return count($this->pool); + } + + /** + * {@inheritdoc} + */ + public function getIterator() + { + if ($this->useClusterSlots) { + $slotsmap = $this->getSlotsMap() ?: $this->askSlotsMap(); + } else { + $slotsmap = $this->getSlotsMap() ?: $this->buildSlotsMap(); + } + + $connections = array(); + + foreach (array_unique($slotsmap) as $node) { + if (!$connection = $this->getConnectionById($node)) { + $this->add($connection = $this->createConnection($node)); + } + + $connections[] = $connection; + } + + return new \ArrayIterator($connections); + } + + /** + * Returns the underlying command hash strategy used to hash commands by + * using keys found in their arguments. + * + * @return StrategyInterface + */ + public function getClusterStrategy() + { + return $this->strategy; + } + + /** + * Returns the underlying connection factory used to create new connection + * instances to Redis nodes indicated by redis-cluster. + * + * @return FactoryInterface + */ + public function getConnectionFactory() + { + return $this->connections; + } + + /** + * Enables automatic fetching of the current slots map from one of the nodes + * using the CLUSTER SLOTS command. This option is enabled by default as + * asking the current slots map to Redis upon -MOVED responses may reduce + * overhead by eliminating the trial-and-error nature of the node guessing + * procedure, mostly when targeting many keys that would end up in a lot of + * redirections. + * + * The slots map can still be manually fetched using the askSlotsMap() + * method whether or not this option is enabled. + * + * @param bool $value Enable or disable the use of CLUSTER SLOTS. + */ + public function useClusterSlots($value) + { + $this->useClusterSlots = (bool) $value; + } +} diff --git a/vendor/predis/predis/src/Connection/Aggregate/ReplicationInterface.php b/vendor/predis/predis/src/Connection/Aggregate/ReplicationInterface.php new file mode 100644 index 00000000..75847331 --- /dev/null +++ b/vendor/predis/predis/src/Connection/Aggregate/ReplicationInterface.php @@ -0,0 +1,52 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Connection\Aggregate; + +use Predis\Connection\AggregateConnectionInterface; +use Predis\Connection\NodeConnectionInterface; + +/** + * Defines a group of Redis nodes in a master / slave replication setup. + * + * @author Daniele Alessandri + */ +interface ReplicationInterface extends AggregateConnectionInterface +{ + /** + * Switches the internal connection instance in use. + * + * @param string $connection Alias of a connection + */ + public function switchTo($connection); + + /** + * Returns the connection instance currently in use by the aggregate + * connection. + * + * @return NodeConnectionInterface + */ + public function getCurrent(); + + /** + * Returns the connection instance for the master Redis node. + * + * @return NodeConnectionInterface + */ + public function getMaster(); + + /** + * Returns a list of connection instances to slave nodes. + * + * @return NodeConnectionInterface + */ + public function getSlaves(); +} diff --git a/vendor/predis/predis/src/Connection/Aggregate/SentinelReplication.php b/vendor/predis/predis/src/Connection/Aggregate/SentinelReplication.php new file mode 100644 index 00000000..789db391 --- /dev/null +++ b/vendor/predis/predis/src/Connection/Aggregate/SentinelReplication.php @@ -0,0 +1,720 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Connection\Aggregate; + +use Predis\Command\CommandInterface; +use Predis\Command\RawCommand; +use Predis\CommunicationException; +use Predis\Connection\ConnectionException; +use Predis\Connection\FactoryInterface as ConnectionFactoryInterface; +use Predis\Connection\NodeConnectionInterface; +use Predis\Connection\Parameters; +use Predis\Replication\ReplicationStrategy; +use Predis\Replication\RoleException; +use Predis\Response\ErrorInterface as ErrorResponseInterface; +use Predis\Response\ServerException; + +/** + * @author Daniele Alessandri + * @author Ville Mattila + */ +class SentinelReplication implements ReplicationInterface +{ + /** + * @var NodeConnectionInterface + */ + protected $master; + + /** + * @var NodeConnectionInterface[] + */ + protected $slaves = array(); + + /** + * @var NodeConnectionInterface + */ + protected $current; + + /** + * @var string + */ + protected $service; + + /** + * @var ConnectionFactoryInterface + */ + protected $connectionFactory; + + /** + * @var ReplicationStrategy + */ + protected $strategy; + + /** + * @var NodeConnectionInterface[] + */ + protected $sentinels = array(); + + /** + * @var NodeConnectionInterface + */ + protected $sentinelConnection; + + /** + * @var float + */ + protected $sentinelTimeout = 0.100; + + /** + * Max number of automatic retries of commands upon server failure. + * + * -1 = unlimited retry attempts + * 0 = no retry attempts (fails immediatly) + * n = fail only after n retry attempts + * + * @var int + */ + protected $retryLimit = 20; + + /** + * Time to wait in milliseconds before fetching a new configuration from one + * of the sentinel servers. + * + * @var int + */ + protected $retryWait = 1000; + + /** + * Flag for automatic fetching of available sentinels. + * + * @var bool + */ + protected $updateSentinels = false; + + /** + * @param string $service Name of the service for autodiscovery. + * @param array $sentinels Sentinel servers connection parameters. + * @param ConnectionFactoryInterface $connectionFactory Connection factory instance. + * @param ReplicationStrategy $strategy Replication strategy instance. + */ + public function __construct( + $service, + array $sentinels, + ConnectionFactoryInterface $connectionFactory, + ReplicationStrategy $strategy = null + ) { + $this->sentinels = $sentinels; + $this->service = $service; + $this->connectionFactory = $connectionFactory; + $this->strategy = $strategy ?: new ReplicationStrategy(); + } + + /** + * Sets a default timeout for connections to sentinels. + * + * When "timeout" is present in the connection parameters of sentinels, its + * value overrides the default sentinel timeout. + * + * @param float $timeout Timeout value. + */ + public function setSentinelTimeout($timeout) + { + $this->sentinelTimeout = (float) $timeout; + } + + /** + * Sets the maximum number of retries for commands upon server failure. + * + * -1 = unlimited retry attempts + * 0 = no retry attempts (fails immediatly) + * n = fail only after n retry attempts + * + * @param int $retry Number of retry attempts. + */ + public function setRetryLimit($retry) + { + $this->retryLimit = (int) $retry; + } + + /** + * Sets the time to wait (in seconds) before fetching a new configuration + * from one of the sentinels. + * + * @param float $seconds Time to wait before the next attempt. + */ + public function setRetryWait($seconds) + { + $this->retryWait = (float) $seconds; + } + + /** + * Set automatic fetching of available sentinels. + * + * @param bool $update Enable or disable automatic updates. + */ + public function setUpdateSentinels($update) + { + $this->updateSentinels = (bool) $update; + } + + /** + * Resets the current connection. + */ + protected function reset() + { + $this->current = null; + } + + /** + * Wipes the current list of master and slaves nodes. + */ + protected function wipeServerList() + { + $this->reset(); + + $this->master = null; + $this->slaves = array(); + } + + /** + * {@inheritdoc} + */ + public function add(NodeConnectionInterface $connection) + { + $alias = $connection->getParameters()->alias; + + if ($alias === 'master') { + $this->master = $connection; + } else { + $this->slaves[$alias ?: count($this->slaves)] = $connection; + } + + $this->reset(); + } + + /** + * {@inheritdoc} + */ + public function remove(NodeConnectionInterface $connection) + { + if ($connection === $this->master) { + $this->master = null; + $this->reset(); + + return true; + } + + if (false !== $id = array_search($connection, $this->slaves, true)) { + unset($this->slaves[$id]); + $this->reset(); + + return true; + } + + return false; + } + + /** + * Creates a new connection to a sentinel server. + * + * @return NodeConnectionInterface + */ + protected function createSentinelConnection($parameters) + { + if ($parameters instanceof NodeConnectionInterface) { + return $parameters; + } + + if (is_string($parameters)) { + $parameters = Parameters::parse($parameters); + } + + if (is_array($parameters)) { + // We explicitly set "database" and "password" to null, + // so that no AUTH and SELECT command is send to the sentinels. + $parameters['database'] = null; + $parameters['password'] = null; + + if (!isset($parameters['timeout'])) { + $parameters['timeout'] = $this->sentinelTimeout; + } + } + + $connection = $this->connectionFactory->create($parameters); + + return $connection; + } + + /** + * Returns the current sentinel connection. + * + * If there is no active sentinel connection, a new connection is created. + * + * @return NodeConnectionInterface + */ + public function getSentinelConnection() + { + if (!$this->sentinelConnection) { + if (!$this->sentinels) { + throw new \Predis\ClientException('No sentinel server available for autodiscovery.'); + } + + $sentinel = array_shift($this->sentinels); + $this->sentinelConnection = $this->createSentinelConnection($sentinel); + } + + return $this->sentinelConnection; + } + + /** + * Fetches an updated list of sentinels from a sentinel. + */ + public function updateSentinels() + { + SENTINEL_QUERY: { + $sentinel = $this->getSentinelConnection(); + + try { + $payload = $sentinel->executeCommand( + RawCommand::create('SENTINEL', 'sentinels', $this->service) + ); + + $this->sentinels = array(); + // NOTE: sentinel server does not return itself, so we add it back. + $this->sentinels[] = $sentinel->getParameters()->toArray(); + + foreach ($payload as $sentinel) { + $this->sentinels[] = array( + 'host' => $sentinel[3], + 'port' => $sentinel[5], + ); + } + } catch (ConnectionException $exception) { + $this->sentinelConnection = null; + + goto SENTINEL_QUERY; + } + } + } + + /** + * Fetches the details for the master and slave servers from a sentinel. + */ + public function querySentinel() + { + $this->wipeServerList(); + + $this->updateSentinels(); + $this->getMaster(); + $this->getSlaves(); + } + + /** + * Handles error responses returned by redis-sentinel. + * + * @param NodeConnectionInterface $sentinel Connection to a sentinel server. + * @param ErrorResponseInterface $error Error response. + */ + private function handleSentinelErrorResponse(NodeConnectionInterface $sentinel, ErrorResponseInterface $error) + { + if ($error->getErrorType() === 'IDONTKNOW') { + throw new ConnectionException($sentinel, $error->getMessage()); + } else { + throw new ServerException($error->getMessage()); + } + } + + /** + * Fetches the details for the master server from a sentinel. + * + * @param NodeConnectionInterface $sentinel Connection to a sentinel server. + * @param string $service Name of the service. + * + * @return array + */ + protected function querySentinelForMaster(NodeConnectionInterface $sentinel, $service) + { + $payload = $sentinel->executeCommand( + RawCommand::create('SENTINEL', 'get-master-addr-by-name', $service) + ); + + if ($payload === null) { + throw new ServerException('ERR No such master with that name'); + } + + if ($payload instanceof ErrorResponseInterface) { + $this->handleSentinelErrorResponse($sentinel, $payload); + } + + return array( + 'host' => $payload[0], + 'port' => $payload[1], + 'alias' => 'master', + ); + } + + /** + * Fetches the details for the slave servers from a sentinel. + * + * @param NodeConnectionInterface $sentinel Connection to a sentinel server. + * @param string $service Name of the service. + * + * @return array + */ + protected function querySentinelForSlaves(NodeConnectionInterface $sentinel, $service) + { + $slaves = array(); + + $payload = $sentinel->executeCommand( + RawCommand::create('SENTINEL', 'slaves', $service) + ); + + if ($payload instanceof ErrorResponseInterface) { + $this->handleSentinelErrorResponse($sentinel, $payload); + } + + foreach ($payload as $slave) { + $flags = explode(',', $slave[9]); + + if (array_intersect($flags, array('s_down', 'o_down', 'disconnected'))) { + continue; + } + + $slaves[] = array( + 'host' => $slave[3], + 'port' => $slave[5], + 'alias' => "slave-$slave[1]", + ); + } + + return $slaves; + } + + /** + * {@inheritdoc} + */ + public function getCurrent() + { + return $this->current; + } + + /** + * {@inheritdoc} + */ + public function getMaster() + { + if ($this->master) { + return $this->master; + } + + if ($this->updateSentinels) { + $this->updateSentinels(); + } + + SENTINEL_QUERY: { + $sentinel = $this->getSentinelConnection(); + + try { + $masterParameters = $this->querySentinelForMaster($sentinel, $this->service); + $masterConnection = $this->connectionFactory->create($masterParameters); + + $this->add($masterConnection); + } catch (ConnectionException $exception) { + $this->sentinelConnection = null; + + goto SENTINEL_QUERY; + } + } + + return $masterConnection; + } + + /** + * {@inheritdoc} + */ + public function getSlaves() + { + if ($this->slaves) { + return array_values($this->slaves); + } + + if ($this->updateSentinels) { + $this->updateSentinels(); + } + + SENTINEL_QUERY: { + $sentinel = $this->getSentinelConnection(); + + try { + $slavesParameters = $this->querySentinelForSlaves($sentinel, $this->service); + + foreach ($slavesParameters as $slaveParameters) { + $this->add($this->connectionFactory->create($slaveParameters)); + } + } catch (ConnectionException $exception) { + $this->sentinelConnection = null; + + goto SENTINEL_QUERY; + } + } + + return array_values($this->slaves ?: array()); + } + + /** + * Returns a random slave. + * + * @return NodeConnectionInterface + */ + protected function pickSlave() + { + if ($slaves = $this->getSlaves()) { + return $slaves[rand(1, count($slaves)) - 1]; + } + } + + /** + * Returns the connection instance in charge for the given command. + * + * @param CommandInterface $command Command instance. + * + * @return NodeConnectionInterface + */ + private function getConnectionInternal(CommandInterface $command) + { + if (!$this->current) { + if ($this->strategy->isReadOperation($command) && $slave = $this->pickSlave()) { + $this->current = $slave; + } else { + $this->current = $this->getMaster(); + } + + return $this->current; + } + + if ($this->current === $this->master) { + return $this->current; + } + + if (!$this->strategy->isReadOperation($command)) { + $this->current = $this->getMaster(); + } + + return $this->current; + } + + /** + * Asserts that the specified connection matches an expected role. + * + * @param NodeConnectionInterface $sentinel Connection to a redis server. + * @param string $role Expected role of the server ("master", "slave" or "sentinel"). + */ + protected function assertConnectionRole(NodeConnectionInterface $connection, $role) + { + $role = strtolower($role); + $actualRole = $connection->executeCommand(RawCommand::create('ROLE')); + + if ($role !== $actualRole[0]) { + throw new RoleException($connection, "Expected $role but got $actualRole[0] [$connection]"); + } + } + + /** + * {@inheritdoc} + */ + public function getConnection(CommandInterface $command) + { + $connection = $this->getConnectionInternal($command); + + if (!$connection->isConnected()) { + // When we do not have any available slave in the pool we can expect + // read-only operations to hit the master server. + $expectedRole = $this->strategy->isReadOperation($command) && $this->slaves ? 'slave' : 'master'; + $this->assertConnectionRole($connection, $expectedRole); + } + + return $connection; + } + + /** + * {@inheritdoc} + */ + public function getConnectionById($connectionId) + { + if ($connectionId === 'master') { + return $this->getMaster(); + } + + $this->getSlaves(); + + if (isset($this->slaves[$connectionId])) { + return $this->slaves[$connectionId]; + } + } + + /** + * {@inheritdoc} + */ + public function switchTo($connection) + { + if (!$connection instanceof NodeConnectionInterface) { + $connection = $this->getConnectionById($connection); + } + + if ($connection && $connection === $this->current) { + return; + } + + if ($connection !== $this->master && !in_array($connection, $this->slaves, true)) { + throw new \InvalidArgumentException('Invalid connection or connection not found.'); + } + + $connection->connect(); + + if ($this->current) { + $this->current->disconnect(); + } + + $this->current = $connection; + } + + /** + * Switches to the master server. + */ + public function switchToMaster() + { + $this->switchTo('master'); + } + + /** + * Switches to a random slave server. + */ + public function switchToSlave() + { + $connection = $this->pickSlave(); + $this->switchTo($connection); + } + + /** + * {@inheritdoc} + */ + public function isConnected() + { + return $this->current ? $this->current->isConnected() : false; + } + + /** + * {@inheritdoc} + */ + public function connect() + { + if (!$this->current) { + if (!$this->current = $this->pickSlave()) { + $this->current = $this->getMaster(); + } + } + + $this->current->connect(); + } + + /** + * {@inheritdoc} + */ + public function disconnect() + { + if ($this->master) { + $this->master->disconnect(); + } + + foreach ($this->slaves as $connection) { + $connection->disconnect(); + } + } + + /** + * Retries the execution of a command upon server failure after asking a new + * configuration to one of the sentinels. + * + * @param CommandInterface $command Command instance. + * @param string $method Actual method. + * + * @return mixed + */ + private function retryCommandOnFailure(CommandInterface $command, $method) + { + $retries = 0; + + SENTINEL_RETRY: { + try { + $response = $this->getConnection($command)->$method($command); + } catch (CommunicationException $exception) { + $this->wipeServerList(); + $exception->getConnection()->disconnect(); + + if ($retries == $this->retryLimit) { + throw $exception; + } + + usleep($this->retryWait * 1000); + + ++$retries; + goto SENTINEL_RETRY; + } + } + + return $response; + } + + /** + * {@inheritdoc} + */ + public function writeRequest(CommandInterface $command) + { + $this->retryCommandOnFailure($command, __FUNCTION__); + } + + /** + * {@inheritdoc} + */ + public function readResponse(CommandInterface $command) + { + return $this->retryCommandOnFailure($command, __FUNCTION__); + } + + /** + * {@inheritdoc} + */ + public function executeCommand(CommandInterface $command) + { + return $this->retryCommandOnFailure($command, __FUNCTION__); + } + + /** + * Returns the underlying replication strategy. + * + * @return ReplicationStrategy + */ + public function getReplicationStrategy() + { + return $this->strategy; + } + + /** + * {@inheritdoc} + */ + public function __sleep() + { + return array( + 'master', 'slaves', 'service', 'sentinels', 'connectionFactory', 'strategy', + ); + } +} diff --git a/vendor/predis/predis/src/Connection/AggregateConnectionInterface.php b/vendor/predis/predis/src/Connection/AggregateConnectionInterface.php new file mode 100644 index 00000000..445b6bb4 --- /dev/null +++ b/vendor/predis/predis/src/Connection/AggregateConnectionInterface.php @@ -0,0 +1,57 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Connection; + +use Predis\Command\CommandInterface; + +/** + * Defines a virtual connection composed of multiple connection instances to + * single Redis nodes. + * + * @author Daniele Alessandri + */ +interface AggregateConnectionInterface extends ConnectionInterface +{ + /** + * Adds a connection instance to the aggregate connection. + * + * @param NodeConnectionInterface $connection Connection instance. + */ + public function add(NodeConnectionInterface $connection); + + /** + * Removes the specified connection instance from the aggregate connection. + * + * @param NodeConnectionInterface $connection Connection instance. + * + * @return bool Returns true if the connection was in the pool. + */ + public function remove(NodeConnectionInterface $connection); + + /** + * Returns the connection instance in charge for the given command. + * + * @param CommandInterface $command Command instance. + * + * @return NodeConnectionInterface + */ + public function getConnection(CommandInterface $command); + + /** + * Returns a connection instance from the aggregate connection by its alias. + * + * @param string $connectionID Connection alias. + * + * @return NodeConnectionInterface|null + */ + public function getConnectionById($connectionID); +} diff --git a/vendor/predis/predis/src/Connection/CompositeConnectionInterface.php b/vendor/predis/predis/src/Connection/CompositeConnectionInterface.php new file mode 100644 index 00000000..d1e55cac --- /dev/null +++ b/vendor/predis/predis/src/Connection/CompositeConnectionInterface.php @@ -0,0 +1,49 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Connection; + +/** + * Defines a connection to communicate with a single Redis server that leverages + * an external protocol processor to handle pluggable protocol handlers. + * + * @author Daniele Alessandri + */ +interface CompositeConnectionInterface extends NodeConnectionInterface +{ + /** + * Returns the protocol processor used by the connection. + */ + public function getProtocol(); + + /** + * Writes the buffer containing over the connection. + * + * @param string $buffer String buffer to be sent over the connection. + */ + public function writeBuffer($buffer); + + /** + * Reads the given number of bytes from the connection. + * + * @param int $length Number of bytes to read from the connection. + * + * @return string + */ + public function readBuffer($length); + + /** + * Reads a line from the connection. + * + * @param string + */ + public function readLine(); +} diff --git a/vendor/predis/predis/src/Connection/CompositeStreamConnection.php b/vendor/predis/predis/src/Connection/CompositeStreamConnection.php new file mode 100644 index 00000000..9bb742f3 --- /dev/null +++ b/vendor/predis/predis/src/Connection/CompositeStreamConnection.php @@ -0,0 +1,125 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Connection; + +use Predis\Command\CommandInterface; +use Predis\Protocol\ProtocolProcessorInterface; +use Predis\Protocol\Text\ProtocolProcessor as TextProtocolProcessor; + +/** + * Connection abstraction to Redis servers based on PHP's stream that uses an + * external protocol processor defining the protocol used for the communication. + * + * @author Daniele Alessandri + */ +class CompositeStreamConnection extends StreamConnection implements CompositeConnectionInterface +{ + protected $protocol; + + /** + * @param ParametersInterface $parameters Initialization parameters for the connection. + * @param ProtocolProcessorInterface $protocol Protocol processor. + */ + public function __construct( + ParametersInterface $parameters, + ProtocolProcessorInterface $protocol = null + ) { + $this->parameters = $this->assertParameters($parameters); + $this->protocol = $protocol ?: new TextProtocolProcessor(); + } + + /** + * {@inheritdoc} + */ + public function getProtocol() + { + return $this->protocol; + } + + /** + * {@inheritdoc} + */ + public function writeBuffer($buffer) + { + $this->write($buffer); + } + + /** + * {@inheritdoc} + */ + public function readBuffer($length) + { + if ($length <= 0) { + throw new \InvalidArgumentException('Length parameter must be greater than 0.'); + } + + $value = ''; + $socket = $this->getResource(); + + do { + $chunk = fread($socket, $length); + + if ($chunk === false || $chunk === '') { + $this->onConnectionError('Error while reading bytes from the server.'); + } + + $value .= $chunk; + } while (($length -= strlen($chunk)) > 0); + + return $value; + } + + /** + * {@inheritdoc} + */ + public function readLine() + { + $value = ''; + $socket = $this->getResource(); + + do { + $chunk = fgets($socket); + + if ($chunk === false || $chunk === '') { + $this->onConnectionError('Error while reading line from the server.'); + } + + $value .= $chunk; + } while (substr($value, -2) !== "\r\n"); + + return substr($value, 0, -2); + } + + /** + * {@inheritdoc} + */ + public function writeRequest(CommandInterface $command) + { + $this->protocol->write($this, $command); + } + + /** + * {@inheritdoc} + */ + public function read() + { + return $this->protocol->read($this); + } + + /** + * {@inheritdoc} + */ + public function __sleep() + { + return array_merge(parent::__sleep(), array('protocol')); + } +} diff --git a/vendor/predis/predis/src/Connection/ConnectionException.php b/vendor/predis/predis/src/Connection/ConnectionException.php new file mode 100644 index 00000000..78d3090a --- /dev/null +++ b/vendor/predis/predis/src/Connection/ConnectionException.php @@ -0,0 +1,23 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Connection; + +use Predis\CommunicationException; + +/** + * Exception class that identifies connection-related errors. + * + * @author Daniele Alessandri + */ +class ConnectionException extends CommunicationException +{ +} diff --git a/vendor/predis/predis/src/Connection/ConnectionInterface.php b/vendor/predis/predis/src/Connection/ConnectionInterface.php new file mode 100644 index 00000000..b1e2a530 --- /dev/null +++ b/vendor/predis/predis/src/Connection/ConnectionInterface.php @@ -0,0 +1,66 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Connection; + +use Predis\Command\CommandInterface; + +/** + * Defines a connection object used to communicate with one or multiple + * Redis servers. + * + * @author Daniele Alessandri + */ +interface ConnectionInterface +{ + /** + * Opens the connection to Redis. + */ + public function connect(); + + /** + * Closes the connection to Redis. + */ + public function disconnect(); + + /** + * Checks if the connection to Redis is considered open. + * + * @return bool + */ + public function isConnected(); + + /** + * Writes the request for the given command over the connection. + * + * @param CommandInterface $command Command instance. + */ + public function writeRequest(CommandInterface $command); + + /** + * Reads the response to the given command from the connection. + * + * @param CommandInterface $command Command instance. + * + * @return mixed + */ + public function readResponse(CommandInterface $command); + + /** + * Writes a request for the given command over the connection and reads back + * the response returned by Redis. + * + * @param CommandInterface $command Command instance. + * + * @return mixed + */ + public function executeCommand(CommandInterface $command); +} diff --git a/vendor/predis/predis/src/Connection/Factory.php b/vendor/predis/predis/src/Connection/Factory.php new file mode 100644 index 00000000..b55c5a00 --- /dev/null +++ b/vendor/predis/predis/src/Connection/Factory.php @@ -0,0 +1,188 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Connection; + +use Predis\Command\RawCommand; + +/** + * Standard connection factory for creating connections to Redis nodes. + * + * @author Daniele Alessandri + */ +class Factory implements FactoryInterface +{ + private $defaults = array(); + + protected $schemes = array( + 'tcp' => 'Predis\Connection\StreamConnection', + 'unix' => 'Predis\Connection\StreamConnection', + 'tls' => 'Predis\Connection\StreamConnection', + 'redis' => 'Predis\Connection\StreamConnection', + 'rediss' => 'Predis\Connection\StreamConnection', + 'http' => 'Predis\Connection\WebdisConnection', + ); + + /** + * Checks if the provided argument represents a valid connection class + * implementing Predis\Connection\NodeConnectionInterface. Optionally, + * callable objects are used for lazy initialization of connection objects. + * + * @param mixed $initializer FQN of a connection class or a callable for lazy initialization. + * + * @throws \InvalidArgumentException + * + * @return mixed + */ + protected function checkInitializer($initializer) + { + if (is_callable($initializer)) { + return $initializer; + } + + $class = new \ReflectionClass($initializer); + + if (!$class->isSubclassOf('Predis\Connection\NodeConnectionInterface')) { + throw new \InvalidArgumentException( + 'A connection initializer must be a valid connection class or a callable object.' + ); + } + + return $initializer; + } + + /** + * {@inheritdoc} + */ + public function define($scheme, $initializer) + { + $this->schemes[$scheme] = $this->checkInitializer($initializer); + } + + /** + * {@inheritdoc} + */ + public function undefine($scheme) + { + unset($this->schemes[$scheme]); + } + + /** + * {@inheritdoc} + */ + public function create($parameters) + { + if (!$parameters instanceof ParametersInterface) { + $parameters = $this->createParameters($parameters); + } + + $scheme = $parameters->scheme; + + if (!isset($this->schemes[$scheme])) { + throw new \InvalidArgumentException("Unknown connection scheme: '$scheme'."); + } + + $initializer = $this->schemes[$scheme]; + + if (is_callable($initializer)) { + $connection = call_user_func($initializer, $parameters, $this); + } else { + $connection = new $initializer($parameters); + $this->prepareConnection($connection); + } + + if (!$connection instanceof NodeConnectionInterface) { + throw new \UnexpectedValueException( + 'Objects returned by connection initializers must implement '. + "'Predis\Connection\NodeConnectionInterface'." + ); + } + + return $connection; + } + + /** + * {@inheritdoc} + */ + public function aggregate(AggregateConnectionInterface $connection, array $parameters) + { + foreach ($parameters as $node) { + $connection->add($node instanceof NodeConnectionInterface ? $node : $this->create($node)); + } + } + + /** + * Assigns a default set of parameters applied to new connections. + * + * The set of parameters passed to create a new connection have precedence + * over the default values set for the connection factory. + * + * @param array $parameters Set of connection parameters. + */ + public function setDefaultParameters(array $parameters) + { + $this->defaults = $parameters; + } + + /** + * Returns the default set of parameters applied to new connections. + * + * @return array + */ + public function getDefaultParameters() + { + return $this->defaults; + } + + /** + * Creates a connection parameters instance from the supplied argument. + * + * @param mixed $parameters Original connection parameters. + * + * @return ParametersInterface + */ + protected function createParameters($parameters) + { + if (is_string($parameters)) { + $parameters = Parameters::parse($parameters); + } else { + $parameters = $parameters ?: array(); + } + + if ($this->defaults) { + $parameters += $this->defaults; + } + + return new Parameters($parameters); + } + + /** + * Prepares a connection instance after its initialization. + * + * @param NodeConnectionInterface $connection Connection instance. + */ + protected function prepareConnection(NodeConnectionInterface $connection) + { + $parameters = $connection->getParameters(); + + if (isset($parameters->password)) { + $connection->addConnectCommand( + new RawCommand(array('AUTH', $parameters->password)) + ); + } + + if (isset($parameters->database)) { + $connection->addConnectCommand( + new RawCommand(array('SELECT', $parameters->database)) + ); + } + } +} diff --git a/vendor/predis/predis/src/Connection/FactoryInterface.php b/vendor/predis/predis/src/Connection/FactoryInterface.php new file mode 100644 index 00000000..4733d1dc --- /dev/null +++ b/vendor/predis/predis/src/Connection/FactoryInterface.php @@ -0,0 +1,52 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Connection; + +/** + * Interface for classes providing a factory of connections to Redis nodes. + * + * @author Daniele Alessandri + */ +interface FactoryInterface +{ + /** + * Defines or overrides the connection class identified by a scheme prefix. + * + * @param string $scheme Target connection scheme. + * @param mixed $initializer Fully-qualified name of a class or a callable for lazy initialization. + */ + public function define($scheme, $initializer); + + /** + * Undefines the connection identified by a scheme prefix. + * + * @param string $scheme Target connection scheme. + */ + public function undefine($scheme); + + /** + * Creates a new connection object. + * + * @param mixed $parameters Initialization parameters for the connection. + * + * @return NodeConnectionInterface + */ + public function create($parameters); + + /** + * Aggregates single connections into an aggregate connection instance. + * + * @param AggregateConnectionInterface $aggregate Aggregate connection instance. + * @param array $parameters List of parameters for each connection. + */ + public function aggregate(AggregateConnectionInterface $aggregate, array $parameters); +} diff --git a/vendor/predis/predis/src/Connection/NodeConnectionInterface.php b/vendor/predis/predis/src/Connection/NodeConnectionInterface.php new file mode 100644 index 00000000..b0f98713 --- /dev/null +++ b/vendor/predis/predis/src/Connection/NodeConnectionInterface.php @@ -0,0 +1,58 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Connection; + +use Predis\Command\CommandInterface; + +/** + * Defines a connection used to communicate with a single Redis node. + * + * @author Daniele Alessandri + */ +interface NodeConnectionInterface extends ConnectionInterface +{ + /** + * Returns a string representation of the connection. + * + * @return string + */ + public function __toString(); + + /** + * Returns the underlying resource used to communicate with Redis. + * + * @return mixed + */ + public function getResource(); + + /** + * Returns the parameters used to initialize the connection. + * + * @return ParametersInterface + */ + public function getParameters(); + + /** + * Pushes the given command into a queue of commands executed when + * establishing the actual connection to Redis. + * + * @param CommandInterface $command Instance of a Redis command. + */ + public function addConnectCommand(CommandInterface $command); + + /** + * Reads a response from the server. + * + * @return mixed + */ + public function read(); +} diff --git a/vendor/predis/predis/src/Connection/Parameters.php b/vendor/predis/predis/src/Connection/Parameters.php new file mode 100644 index 00000000..674e9353 --- /dev/null +++ b/vendor/predis/predis/src/Connection/Parameters.php @@ -0,0 +1,176 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Connection; + +/** + * Container for connection parameters used to initialize connections to Redis. + * + * {@inheritdoc} + * + * @author Daniele Alessandri + */ +class Parameters implements ParametersInterface +{ + private $parameters; + + private static $defaults = array( + 'scheme' => 'tcp', + 'host' => '127.0.0.1', + 'port' => 6379, + ); + + /** + * @param array $parameters Named array of connection parameters. + */ + public function __construct(array $parameters = array()) + { + $this->parameters = $this->filter($parameters) + $this->getDefaults(); + } + + /** + * Returns some default parameters with their values. + * + * @return array + */ + protected function getDefaults() + { + return self::$defaults; + } + + /** + * Creates a new instance by supplying the initial parameters either in the + * form of an URI string or a named array. + * + * @param array|string $parameters Set of connection parameters. + * + * @return Parameters + */ + public static function create($parameters) + { + if (is_string($parameters)) { + $parameters = static::parse($parameters); + } + + return new static($parameters ?: array()); + } + + /** + * Parses an URI string returning an array of connection parameters. + * + * When using the "redis" and "rediss" schemes the URI is parsed according + * to the rules defined by the provisional registration documents approved + * by IANA. If the URI has a password in its "user-information" part or a + * database number in the "path" part these values override the values of + * "password" and "database" if they are present in the "query" part. + * + * @link http://www.iana.org/assignments/uri-schemes/prov/redis + * @link http://www.iana.org/assignments/uri-schemes/prov/rediss + * + * @param string $uri URI string. + * + * @throws \InvalidArgumentException + * + * @return array + */ + public static function parse($uri) + { + if (stripos($uri, 'unix://') === 0) { + // parse_url() can parse unix:/path/to/sock so we do not need the + // unix:///path/to/sock hack, we will support it anyway until 2.0. + $uri = str_ireplace('unix://', 'unix:', $uri); + } + + if (!$parsed = parse_url($uri)) { + throw new \InvalidArgumentException("Invalid parameters URI: $uri"); + } + + if ( + isset($parsed['host']) + && false !== strpos($parsed['host'], '[') + && false !== strpos($parsed['host'], ']') + ) { + $parsed['host'] = substr($parsed['host'], 1, -1); + } + + if (isset($parsed['query'])) { + parse_str($parsed['query'], $queryarray); + unset($parsed['query']); + + $parsed = array_merge($parsed, $queryarray); + } + + if (stripos($uri, 'redis') === 0) { + if (isset($parsed['pass'])) { + $parsed['password'] = $parsed['pass']; + unset($parsed['pass']); + } + + if (isset($parsed['path']) && preg_match('/^\/(\d+)(\/.*)?/', $parsed['path'], $path)) { + $parsed['database'] = $path[1]; + + if (isset($path[2])) { + $parsed['path'] = $path[2]; + } else { + unset($parsed['path']); + } + } + } + + return $parsed; + } + + /** + * Validates and converts each value of the connection parameters array. + * + * @param array $parameters Connection parameters. + * + * @return array + */ + protected function filter(array $parameters) + { + return $parameters ?: array(); + } + + /** + * {@inheritdoc} + */ + public function __get($parameter) + { + if (isset($this->parameters[$parameter])) { + return $this->parameters[$parameter]; + } + } + + /** + * {@inheritdoc} + */ + public function __isset($parameter) + { + return isset($this->parameters[$parameter]); + } + + /** + * {@inheritdoc} + */ + public function toArray() + { + return $this->parameters; + } + + /** + * {@inheritdoc} + */ + public function __sleep() + { + return array('parameters'); + } +} diff --git a/vendor/predis/predis/src/Connection/ParametersInterface.php b/vendor/predis/predis/src/Connection/ParametersInterface.php new file mode 100644 index 00000000..8dac493f --- /dev/null +++ b/vendor/predis/predis/src/Connection/ParametersInterface.php @@ -0,0 +1,62 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Connection; + +/** + * Interface defining a container for connection parameters. + * + * The actual list of connection parameters depends on the features supported by + * each connection backend class (please refer to their specific documentation), + * but the most common parameters used through the library are: + * + * @property-read string scheme Connection scheme, such as 'tcp' or 'unix'. + * @property-read string host IP address or hostname of Redis. + * @property-read int port TCP port on which Redis is listening to. + * @property-read string path Path of a UNIX domain socket file. + * @property-read string alias Alias for the connection. + * @property-read float timeout Timeout for the connect() operation. + * @property-read float read_write_timeout Timeout for read() and write() operations. + * @property-read bool async_connect Performs the connect() operation asynchronously. + * @property-read bool tcp_nodelay Toggles the Nagle's algorithm for coalescing. + * @property-read bool persistent Leaves the connection open after a GC collection. + * @property-read string password Password to access Redis (see the AUTH command). + * @property-read string database Database index (see the SELECT command). + * + * @author Daniele Alessandri + */ +interface ParametersInterface +{ + /** + * Checks if the specified parameters is set. + * + * @param string $parameter Name of the parameter. + * + * @return bool + */ + public function __isset($parameter); + + /** + * Returns the value of the specified parameter. + * + * @param string $parameter Name of the parameter. + * + * @return mixed|null + */ + public function __get($parameter); + + /** + * Returns an array representation of the connection parameters. + * + * @return array + */ + public function toArray(); +} diff --git a/vendor/predis/predis/src/Connection/PhpiredisSocketConnection.php b/vendor/predis/predis/src/Connection/PhpiredisSocketConnection.php new file mode 100644 index 00000000..86dfa7e5 --- /dev/null +++ b/vendor/predis/predis/src/Connection/PhpiredisSocketConnection.php @@ -0,0 +1,418 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Connection; + +use Predis\Command\CommandInterface; +use Predis\NotSupportedException; +use Predis\Response\Error as ErrorResponse; +use Predis\Response\ErrorInterface as ErrorResponseInterface; +use Predis\Response\Status as StatusResponse; + +/** + * This class provides the implementation of a Predis connection that uses the + * PHP socket extension for network communication and wraps the phpiredis C + * extension (PHP bindings for hiredis) to parse the Redis protocol. + * + * This class is intended to provide an optional low-overhead alternative for + * processing responses from Redis compared to the standard pure-PHP classes. + * Differences in speed when dealing with short inline responses are practically + * nonexistent, the actual speed boost is for big multibulk responses when this + * protocol processor can parse and return responses very fast. + * + * For instructions on how to build and install the phpiredis extension, please + * consult the repository of the project. + * + * The connection parameters supported by this class are: + * + * - scheme: it can be either 'redis', 'tcp' or 'unix'. + * - host: hostname or IP address of the server. + * - port: TCP port of the server. + * - path: path of a UNIX domain socket when scheme is 'unix'. + * - timeout: timeout to perform the connection (default is 5 seconds). + * - read_write_timeout: timeout of read / write operations. + * + * @link http://github.com/nrk/phpiredis + * + * @author Daniele Alessandri + */ +class PhpiredisSocketConnection extends AbstractConnection +{ + private $reader; + + /** + * {@inheritdoc} + */ + public function __construct(ParametersInterface $parameters) + { + $this->assertExtensions(); + + parent::__construct($parameters); + + $this->reader = $this->createReader(); + } + + /** + * Disconnects from the server and destroys the underlying resource and the + * protocol reader resource when PHP's garbage collector kicks in. + */ + public function __destruct() + { + phpiredis_reader_destroy($this->reader); + + parent::__destruct(); + } + + /** + * Checks if the socket and phpiredis extensions are loaded in PHP. + */ + protected function assertExtensions() + { + if (!extension_loaded('sockets')) { + throw new NotSupportedException( + 'The "sockets" extension is required by this connection backend.' + ); + } + + if (!extension_loaded('phpiredis')) { + throw new NotSupportedException( + 'The "phpiredis" extension is required by this connection backend.' + ); + } + } + + /** + * {@inheritdoc} + */ + protected function assertParameters(ParametersInterface $parameters) + { + switch ($parameters->scheme) { + case 'tcp': + case 'redis': + case 'unix': + break; + + default: + throw new \InvalidArgumentException("Invalid scheme: '$parameters->scheme'."); + } + + if (isset($parameters->persistent)) { + throw new NotSupportedException( + 'Persistent connections are not supported by this connection backend.' + ); + } + + return $parameters; + } + + /** + * Creates a new instance of the protocol reader resource. + * + * @return resource + */ + private function createReader() + { + $reader = phpiredis_reader_create(); + + phpiredis_reader_set_status_handler($reader, $this->getStatusHandler()); + phpiredis_reader_set_error_handler($reader, $this->getErrorHandler()); + + return $reader; + } + + /** + * Returns the underlying protocol reader resource. + * + * @return resource + */ + protected function getReader() + { + return $this->reader; + } + + /** + * Returns the handler used by the protocol reader for inline responses. + * + * @return \Closure + */ + protected function getStatusHandler() + { + static $statusHandler; + + if (!$statusHandler) { + $statusHandler = function ($payload) { + return StatusResponse::get($payload); + }; + } + + return $statusHandler; + } + + /** + * Returns the handler used by the protocol reader for error responses. + * + * @return \Closure + */ + protected function getErrorHandler() + { + static $errorHandler; + + if (!$errorHandler) { + $errorHandler = function ($errorMessage) { + return new ErrorResponse($errorMessage); + }; + } + + return $errorHandler; + } + + /** + * Helper method used to throw exceptions on socket errors. + */ + private function emitSocketError() + { + $errno = socket_last_error(); + $errstr = socket_strerror($errno); + + $this->disconnect(); + + $this->onConnectionError(trim($errstr), $errno); + } + + /** + * Gets the address of an host from connection parameters. + * + * @param ParametersInterface $parameters Parameters used to initialize the connection. + * + * @return string + */ + protected static function getAddress(ParametersInterface $parameters) + { + if (filter_var($host = $parameters->host, FILTER_VALIDATE_IP)) { + return $host; + } + + if ($host === $address = gethostbyname($host)) { + return false; + } + + return $address; + } + + /** + * {@inheritdoc} + */ + protected function createResource() + { + $parameters = $this->parameters; + + if ($parameters->scheme === 'unix') { + $address = $parameters->path; + $domain = AF_UNIX; + $protocol = 0; + } else { + if (false === $address = self::getAddress($parameters)) { + $this->onConnectionError("Cannot resolve the address of '$parameters->host'."); + } + + $domain = filter_var($address, FILTER_VALIDATE_IP, FILTER_FLAG_IPV6) ? AF_INET6 : AF_INET; + $protocol = SOL_TCP; + } + + $socket = @socket_create($domain, SOCK_STREAM, $protocol); + + if (!is_resource($socket)) { + $this->emitSocketError(); + } + + $this->setSocketOptions($socket, $parameters); + $this->connectWithTimeout($socket, $address, $parameters); + + return $socket; + } + + /** + * Sets options on the socket resource from the connection parameters. + * + * @param resource $socket Socket resource. + * @param ParametersInterface $parameters Parameters used to initialize the connection. + */ + private function setSocketOptions($socket, ParametersInterface $parameters) + { + if ($parameters->scheme !== 'unix') { + if (!socket_set_option($socket, SOL_TCP, TCP_NODELAY, 1)) { + $this->emitSocketError(); + } + + if (!socket_set_option($socket, SOL_SOCKET, SO_REUSEADDR, 1)) { + $this->emitSocketError(); + } + } + + if (isset($parameters->read_write_timeout)) { + $rwtimeout = (float) $parameters->read_write_timeout; + $timeoutSec = floor($rwtimeout); + $timeoutUsec = ($rwtimeout - $timeoutSec) * 1000000; + + $timeout = array( + 'sec' => $timeoutSec, + 'usec' => $timeoutUsec, + ); + + if (!socket_set_option($socket, SOL_SOCKET, SO_SNDTIMEO, $timeout)) { + $this->emitSocketError(); + } + + if (!socket_set_option($socket, SOL_SOCKET, SO_RCVTIMEO, $timeout)) { + $this->emitSocketError(); + } + } + } + + /** + * Opens the actual connection to the server with a timeout. + * + * @param resource $socket Socket resource. + * @param string $address IP address (DNS-resolved from hostname) + * @param ParametersInterface $parameters Parameters used to initialize the connection. + * + * @return string + */ + private function connectWithTimeout($socket, $address, ParametersInterface $parameters) + { + socket_set_nonblock($socket); + + if (@socket_connect($socket, $address, (int) $parameters->port) === false) { + $error = socket_last_error(); + + if ($error != SOCKET_EINPROGRESS && $error != SOCKET_EALREADY) { + $this->emitSocketError(); + } + } + + socket_set_block($socket); + + $null = null; + $selectable = array($socket); + + $timeout = (isset($parameters->timeout) ? (float) $parameters->timeout : 5.0); + $timeoutSecs = floor($timeout); + $timeoutUSecs = ($timeout - $timeoutSecs) * 1000000; + + $selected = socket_select($selectable, $selectable, $null, $timeoutSecs, $timeoutUSecs); + + if ($selected === 2) { + $this->onConnectionError('Connection refused.', SOCKET_ECONNREFUSED); + } + + if ($selected === 0) { + $this->onConnectionError('Connection timed out.', SOCKET_ETIMEDOUT); + } + + if ($selected === false) { + $this->emitSocketError(); + } + } + + /** + * {@inheritdoc} + */ + public function connect() + { + if (parent::connect() && $this->initCommands) { + foreach ($this->initCommands as $command) { + $response = $this->executeCommand($command); + + if ($response instanceof ErrorResponseInterface) { + $this->onConnectionError("`{$command->getId()}` failed: $response", 0); + } + } + } + } + + /** + * {@inheritdoc} + */ + public function disconnect() + { + if ($this->isConnected()) { + socket_close($this->getResource()); + parent::disconnect(); + } + } + + /** + * {@inheritdoc} + */ + protected function write($buffer) + { + $socket = $this->getResource(); + + while (($length = strlen($buffer)) > 0) { + $written = socket_write($socket, $buffer, $length); + + if ($length === $written) { + return; + } + + if ($written === false) { + $this->onConnectionError('Error while writing bytes to the server.'); + } + + $buffer = substr($buffer, $written); + } + } + + /** + * {@inheritdoc} + */ + public function read() + { + $socket = $this->getResource(); + $reader = $this->reader; + + while (PHPIREDIS_READER_STATE_INCOMPLETE === $state = phpiredis_reader_get_state($reader)) { + if (@socket_recv($socket, $buffer, 4096, 0) === false || $buffer === '' || $buffer === null) { + $this->emitSocketError(); + } + + phpiredis_reader_feed($reader, $buffer); + } + + if ($state === PHPIREDIS_READER_STATE_COMPLETE) { + return phpiredis_reader_get_reply($reader); + } else { + $this->onProtocolError(phpiredis_reader_get_error($reader)); + + return; + } + } + + /** + * {@inheritdoc} + */ + public function writeRequest(CommandInterface $command) + { + $arguments = $command->getArguments(); + array_unshift($arguments, $command->getId()); + + $this->write(phpiredis_format_command($arguments)); + } + + /** + * {@inheritdoc} + */ + public function __wakeup() + { + $this->assertExtensions(); + $this->reader = $this->createReader(); + } +} diff --git a/vendor/predis/predis/src/Connection/PhpiredisStreamConnection.php b/vendor/predis/predis/src/Connection/PhpiredisStreamConnection.php new file mode 100644 index 00000000..d7437da8 --- /dev/null +++ b/vendor/predis/predis/src/Connection/PhpiredisStreamConnection.php @@ -0,0 +1,238 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Connection; + +use Predis\Command\CommandInterface; +use Predis\NotSupportedException; +use Predis\Response\Error as ErrorResponse; +use Predis\Response\Status as StatusResponse; + +/** + * This class provides the implementation of a Predis connection that uses PHP's + * streams for network communication and wraps the phpiredis C extension (PHP + * bindings for hiredis) to parse and serialize the Redis protocol. + * + * This class is intended to provide an optional low-overhead alternative for + * processing responses from Redis compared to the standard pure-PHP classes. + * Differences in speed when dealing with short inline responses are practically + * nonexistent, the actual speed boost is for big multibulk responses when this + * protocol processor can parse and return responses very fast. + * + * For instructions on how to build and install the phpiredis extension, please + * consult the repository of the project. + * + * The connection parameters supported by this class are: + * + * - scheme: it can be either 'redis', 'tcp' or 'unix'. + * - host: hostname or IP address of the server. + * - port: TCP port of the server. + * - path: path of a UNIX domain socket when scheme is 'unix'. + * - timeout: timeout to perform the connection. + * - read_write_timeout: timeout of read / write operations. + * - async_connect: performs the connection asynchronously. + * - tcp_nodelay: enables or disables Nagle's algorithm for coalescing. + * - persistent: the connection is left intact after a GC collection. + * + * @link https://github.com/nrk/phpiredis + * + * @author Daniele Alessandri + */ +class PhpiredisStreamConnection extends StreamConnection +{ + private $reader; + + /** + * {@inheritdoc} + */ + public function __construct(ParametersInterface $parameters) + { + $this->assertExtensions(); + + parent::__construct($parameters); + + $this->reader = $this->createReader(); + } + + /** + * {@inheritdoc} + */ + public function __destruct() + { + phpiredis_reader_destroy($this->reader); + + parent::__destruct(); + } + + /** + * Checks if the phpiredis extension is loaded in PHP. + */ + private function assertExtensions() + { + if (!extension_loaded('phpiredis')) { + throw new NotSupportedException( + 'The "phpiredis" extension is required by this connection backend.' + ); + } + } + + /** + * {@inheritdoc} + */ + protected function assertSslSupport(ParametersInterface $parameters) + { + throw new \InvalidArgumentException('SSL encryption is not supported by this connection backend.'); + } + + /** + * {@inheritdoc} + */ + protected function createStreamSocket(ParametersInterface $parameters, $address, $flags, $context = null) + { + $socket = null; + $timeout = (isset($parameters->timeout) ? (float) $parameters->timeout : 5.0); + + $resource = @stream_socket_client($address, $errno, $errstr, $timeout, $flags); + + if (!$resource) { + $this->onConnectionError(trim($errstr), $errno); + } + + if (isset($parameters->read_write_timeout) && function_exists('socket_import_stream')) { + $rwtimeout = (float) $parameters->read_write_timeout; + $rwtimeout = $rwtimeout > 0 ? $rwtimeout : -1; + + $timeout = array( + 'sec' => $timeoutSeconds = floor($rwtimeout), + 'usec' => ($rwtimeout - $timeoutSeconds) * 1000000, + ); + + $socket = $socket ?: socket_import_stream($resource); + @socket_set_option($socket, SOL_SOCKET, SO_SNDTIMEO, $timeout); + @socket_set_option($socket, SOL_SOCKET, SO_RCVTIMEO, $timeout); + } + + if (isset($parameters->tcp_nodelay) && function_exists('socket_import_stream')) { + $socket = $socket ?: socket_import_stream($resource); + socket_set_option($socket, SOL_TCP, TCP_NODELAY, (int) $parameters->tcp_nodelay); + } + + return $resource; + } + + /** + * Creates a new instance of the protocol reader resource. + * + * @return resource + */ + private function createReader() + { + $reader = phpiredis_reader_create(); + + phpiredis_reader_set_status_handler($reader, $this->getStatusHandler()); + phpiredis_reader_set_error_handler($reader, $this->getErrorHandler()); + + return $reader; + } + + /** + * Returns the underlying protocol reader resource. + * + * @return resource + */ + protected function getReader() + { + return $this->reader; + } + + /** + * Returns the handler used by the protocol reader for inline responses. + * + * @return \Closure + */ + protected function getStatusHandler() + { + static $statusHandler; + + if (!$statusHandler) { + $statusHandler = function ($payload) { + return StatusResponse::get($payload); + }; + } + + return $statusHandler; + } + + /** + * Returns the handler used by the protocol reader for error responses. + * + * @return \Closure + */ + protected function getErrorHandler() + { + static $errorHandler; + + if (!$errorHandler) { + $errorHandler = function ($errorMessage) { + return new ErrorResponse($errorMessage); + }; + } + + return $errorHandler; + } + + /** + * {@inheritdoc} + */ + public function read() + { + $socket = $this->getResource(); + $reader = $this->reader; + + while (PHPIREDIS_READER_STATE_INCOMPLETE === $state = phpiredis_reader_get_state($reader)) { + $buffer = stream_socket_recvfrom($socket, 4096); + + if ($buffer === false || $buffer === '') { + $this->onConnectionError('Error while reading bytes from the server.'); + } + + phpiredis_reader_feed($reader, $buffer); + } + + if ($state === PHPIREDIS_READER_STATE_COMPLETE) { + return phpiredis_reader_get_reply($reader); + } else { + $this->onProtocolError(phpiredis_reader_get_error($reader)); + + return; + } + } + + /** + * {@inheritdoc} + */ + public function writeRequest(CommandInterface $command) + { + $arguments = $command->getArguments(); + array_unshift($arguments, $command->getId()); + + $this->write(phpiredis_format_command($arguments)); + } + + /** + * {@inheritdoc} + */ + public function __wakeup() + { + $this->assertExtensions(); + $this->reader = $this->createReader(); + } +} diff --git a/vendor/predis/predis/src/Connection/StreamConnection.php b/vendor/predis/predis/src/Connection/StreamConnection.php new file mode 100644 index 00000000..c48c681e --- /dev/null +++ b/vendor/predis/predis/src/Connection/StreamConnection.php @@ -0,0 +1,396 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Connection; + +use Predis\Command\CommandInterface; +use Predis\Response\Error as ErrorResponse; +use Predis\Response\ErrorInterface as ErrorResponseInterface; +use Predis\Response\Status as StatusResponse; + +/** + * Standard connection to Redis servers implemented on top of PHP's streams. + * The connection parameters supported by this class are:. + * + * - scheme: it can be either 'redis', 'tcp', 'rediss', 'tls' or 'unix'. + * - host: hostname or IP address of the server. + * - port: TCP port of the server. + * - path: path of a UNIX domain socket when scheme is 'unix'. + * - timeout: timeout to perform the connection (default is 5 seconds). + * - read_write_timeout: timeout of read / write operations. + * - async_connect: performs the connection asynchronously. + * - tcp_nodelay: enables or disables Nagle's algorithm for coalescing. + * - persistent: the connection is left intact after a GC collection. + * - ssl: context options array (see http://php.net/manual/en/context.ssl.php) + * + * @author Daniele Alessandri + */ +class StreamConnection extends AbstractConnection +{ + /** + * Disconnects from the server and destroys the underlying resource when the + * garbage collector kicks in only if the connection has not been marked as + * persistent. + */ + public function __destruct() + { + if (isset($this->parameters->persistent) && $this->parameters->persistent) { + return; + } + + $this->disconnect(); + } + + /** + * {@inheritdoc} + */ + protected function assertParameters(ParametersInterface $parameters) + { + switch ($parameters->scheme) { + case 'tcp': + case 'redis': + case 'unix': + break; + + case 'tls': + case 'rediss': + $this->assertSslSupport($parameters); + break; + + default: + throw new \InvalidArgumentException("Invalid scheme: '$parameters->scheme'."); + } + + return $parameters; + } + + /** + * Checks needed conditions for SSL-encrypted connections. + * + * @param ParametersInterface $parameters Initialization parameters for the connection. + * + * @throws \InvalidArgumentException + */ + protected function assertSslSupport(ParametersInterface $parameters) + { + if ( + filter_var($parameters->persistent, FILTER_VALIDATE_BOOLEAN) && + version_compare(PHP_VERSION, '7.0.0beta') < 0 + ) { + throw new \InvalidArgumentException('Persistent SSL connections require PHP >= 7.0.0.'); + } + } + + /** + * {@inheritdoc} + */ + protected function createResource() + { + switch ($this->parameters->scheme) { + case 'tcp': + case 'redis': + return $this->tcpStreamInitializer($this->parameters); + + case 'unix': + return $this->unixStreamInitializer($this->parameters); + + case 'tls': + case 'rediss': + return $this->tlsStreamInitializer($this->parameters); + + default: + throw new \InvalidArgumentException("Invalid scheme: '{$this->parameters->scheme}'."); + } + } + + /** + * Creates a connected stream socket resource. + * + * @param ParametersInterface $parameters Connection parameters. + * @param string $address Address for stream_socket_client(). + * @param int $flags Flags for stream_socket_client(). + * + * @return resource + */ + protected function createStreamSocket(ParametersInterface $parameters, $address, $flags) + { + $timeout = (isset($parameters->timeout) ? (float) $parameters->timeout : 5.0); + + if (!$resource = @stream_socket_client($address, $errno, $errstr, $timeout, $flags)) { + $this->onConnectionError(trim($errstr), $errno); + } + + if (isset($parameters->read_write_timeout)) { + $rwtimeout = (float) $parameters->read_write_timeout; + $rwtimeout = $rwtimeout > 0 ? $rwtimeout : -1; + $timeoutSeconds = floor($rwtimeout); + $timeoutUSeconds = ($rwtimeout - $timeoutSeconds) * 1000000; + stream_set_timeout($resource, $timeoutSeconds, $timeoutUSeconds); + } + + if (isset($parameters->tcp_nodelay) && function_exists('socket_import_stream')) { + $socket = socket_import_stream($resource); + socket_set_option($socket, SOL_TCP, TCP_NODELAY, (int) $parameters->tcp_nodelay); + } + + return $resource; + } + + /** + * Initializes a TCP stream resource. + * + * @param ParametersInterface $parameters Initialization parameters for the connection. + * + * @return resource + */ + protected function tcpStreamInitializer(ParametersInterface $parameters) + { + if (!filter_var($parameters->host, FILTER_VALIDATE_IP, FILTER_FLAG_IPV6)) { + $address = "tcp://$parameters->host:$parameters->port"; + } else { + $address = "tcp://[$parameters->host]:$parameters->port"; + } + + $flags = STREAM_CLIENT_CONNECT; + + if (isset($parameters->async_connect) && $parameters->async_connect) { + $flags |= STREAM_CLIENT_ASYNC_CONNECT; + } + + if (isset($parameters->persistent)) { + if (false !== $persistent = filter_var($parameters->persistent, FILTER_VALIDATE_BOOLEAN, FILTER_NULL_ON_FAILURE)) { + $flags |= STREAM_CLIENT_PERSISTENT; + + if ($persistent === null) { + $address = "{$address}/{$parameters->persistent}"; + } + } + } + + $resource = $this->createStreamSocket($parameters, $address, $flags); + + return $resource; + } + + /** + * Initializes a UNIX stream resource. + * + * @param ParametersInterface $parameters Initialization parameters for the connection. + * + * @return resource + */ + protected function unixStreamInitializer(ParametersInterface $parameters) + { + if (!isset($parameters->path)) { + throw new \InvalidArgumentException('Missing UNIX domain socket path.'); + } + + $flags = STREAM_CLIENT_CONNECT; + + if (isset($parameters->persistent)) { + if (false !== $persistent = filter_var($parameters->persistent, FILTER_VALIDATE_BOOLEAN, FILTER_NULL_ON_FAILURE)) { + $flags |= STREAM_CLIENT_PERSISTENT; + + if ($persistent === null) { + throw new \InvalidArgumentException( + 'Persistent connection IDs are not supported when using UNIX domain sockets.' + ); + } + } + } + + $resource = $this->createStreamSocket($parameters, "unix://{$parameters->path}", $flags); + + return $resource; + } + + /** + * Initializes a SSL-encrypted TCP stream resource. + * + * @param ParametersInterface $parameters Initialization parameters for the connection. + * + * @return resource + */ + protected function tlsStreamInitializer(ParametersInterface $parameters) + { + $resource = $this->tcpStreamInitializer($parameters); + $metadata = stream_get_meta_data($resource); + + // Detect if crypto mode is already enabled for this stream (PHP >= 7.0.0). + if (isset($metadata['crypto'])) { + return $resource; + } + + if (is_array($parameters->ssl)) { + $options = $parameters->ssl; + } else { + $options = array(); + } + + if (!isset($options['crypto_type'])) { + $options['crypto_type'] = STREAM_CRYPTO_METHOD_TLS_CLIENT; + } + + if (!stream_context_set_option($resource, array('ssl' => $options))) { + $this->onConnectionError('Error while setting SSL context options'); + } + + if (!stream_socket_enable_crypto($resource, true, $options['crypto_type'])) { + $this->onConnectionError('Error while switching to encrypted communication'); + } + + return $resource; + } + + /** + * {@inheritdoc} + */ + public function connect() + { + if (parent::connect() && $this->initCommands) { + foreach ($this->initCommands as $command) { + $response = $this->executeCommand($command); + + if ($response instanceof ErrorResponseInterface) { + $this->onConnectionError("`{$command->getId()}` failed: $response", 0); + } + } + } + } + + /** + * {@inheritdoc} + */ + public function disconnect() + { + if ($this->isConnected()) { + fclose($this->getResource()); + parent::disconnect(); + } + } + + /** + * Performs a write operation over the stream of the buffer containing a + * command serialized with the Redis wire protocol. + * + * @param string $buffer Representation of a command in the Redis wire protocol. + */ + protected function write($buffer) + { + $socket = $this->getResource(); + + while (($length = strlen($buffer)) > 0) { + $written = @fwrite($socket, $buffer); + + if ($length === $written) { + return; + } + + if ($written === false || $written === 0) { + $this->onConnectionError('Error while writing bytes to the server.'); + } + + $buffer = substr($buffer, $written); + } + } + + /** + * {@inheritdoc} + */ + public function read() + { + $socket = $this->getResource(); + $chunk = fgets($socket); + + if ($chunk === false || $chunk === '') { + $this->onConnectionError('Error while reading line from the server.'); + } + + $prefix = $chunk[0]; + $payload = substr($chunk, 1, -2); + + switch ($prefix) { + case '+': + return StatusResponse::get($payload); + + case '$': + $size = (int) $payload; + + if ($size === -1) { + return; + } + + $bulkData = ''; + $bytesLeft = ($size += 2); + + do { + $chunk = fread($socket, min($bytesLeft, 4096)); + + if ($chunk === false || $chunk === '') { + $this->onConnectionError('Error while reading bytes from the server.'); + } + + $bulkData .= $chunk; + $bytesLeft = $size - strlen($bulkData); + } while ($bytesLeft > 0); + + return substr($bulkData, 0, -2); + + case '*': + $count = (int) $payload; + + if ($count === -1) { + return; + } + + $multibulk = array(); + + for ($i = 0; $i < $count; ++$i) { + $multibulk[$i] = $this->read(); + } + + return $multibulk; + + case ':': + $integer = (int) $payload; + return $integer == $payload ? $integer : $payload; + + case '-': + return new ErrorResponse($payload); + + default: + $this->onProtocolError("Unknown response prefix: '$prefix'."); + + return; + } + } + + /** + * {@inheritdoc} + */ + public function writeRequest(CommandInterface $command) + { + $commandID = $command->getId(); + $arguments = $command->getArguments(); + + $cmdlen = strlen($commandID); + $reqlen = count($arguments) + 1; + + $buffer = "*{$reqlen}\r\n\${$cmdlen}\r\n{$commandID}\r\n"; + + foreach ($arguments as $argument) { + $arglen = strlen($argument); + $buffer .= "\${$arglen}\r\n{$argument}\r\n"; + } + + $this->write($buffer); + } +} diff --git a/vendor/predis/predis/src/Connection/WebdisConnection.php b/vendor/predis/predis/src/Connection/WebdisConnection.php new file mode 100644 index 00000000..df33004f --- /dev/null +++ b/vendor/predis/predis/src/Connection/WebdisConnection.php @@ -0,0 +1,366 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Connection; + +use Predis\Command\CommandInterface; +use Predis\NotSupportedException; +use Predis\Protocol\ProtocolException; +use Predis\Response\Error as ErrorResponse; +use Predis\Response\Status as StatusResponse; + +/** + * This class implements a Predis connection that actually talks with Webdis + * instead of connecting directly to Redis. It relies on the cURL extension to + * communicate with the web server and the phpiredis extension to parse the + * protocol for responses returned in the http response bodies. + * + * Some features are not yet available or they simply cannot be implemented: + * - Pipelining commands. + * - Publish / Subscribe. + * - MULTI / EXEC transactions (not yet supported by Webdis). + * + * The connection parameters supported by this class are: + * + * - scheme: must be 'http'. + * - host: hostname or IP address of the server. + * - port: TCP port of the server. + * - timeout: timeout to perform the connection (default is 5 seconds). + * - user: username for authentication. + * - pass: password for authentication. + * + * @link http://webd.is + * @link http://github.com/nicolasff/webdis + * @link http://github.com/seppo0010/phpiredis + * + * @author Daniele Alessandri + */ +class WebdisConnection implements NodeConnectionInterface +{ + private $parameters; + private $resource; + private $reader; + + /** + * @param ParametersInterface $parameters Initialization parameters for the connection. + * + * @throws \InvalidArgumentException + */ + public function __construct(ParametersInterface $parameters) + { + $this->assertExtensions(); + + if ($parameters->scheme !== 'http') { + throw new \InvalidArgumentException("Invalid scheme: '{$parameters->scheme}'."); + } + + $this->parameters = $parameters; + + $this->resource = $this->createCurl(); + $this->reader = $this->createReader(); + } + + /** + * Frees the underlying cURL and protocol reader resources when the garbage + * collector kicks in. + */ + public function __destruct() + { + curl_close($this->resource); + phpiredis_reader_destroy($this->reader); + } + + /** + * Helper method used to throw on unsupported methods. + * + * @param string $method Name of the unsupported method. + * + * @throws NotSupportedException + */ + private function throwNotSupportedException($method) + { + $class = __CLASS__; + throw new NotSupportedException("The method $class::$method() is not supported."); + } + + /** + * Checks if the cURL and phpiredis extensions are loaded in PHP. + */ + private function assertExtensions() + { + if (!extension_loaded('curl')) { + throw new NotSupportedException( + 'The "curl" extension is required by this connection backend.' + ); + } + + if (!extension_loaded('phpiredis')) { + throw new NotSupportedException( + 'The "phpiredis" extension is required by this connection backend.' + ); + } + } + + /** + * Initializes cURL. + * + * @return resource + */ + private function createCurl() + { + $parameters = $this->getParameters(); + $timeout = (isset($parameters->timeout) ? (float) $parameters->timeout : 5.0) * 1000; + + if (filter_var($host = $parameters->host, FILTER_VALIDATE_IP)) { + $host = "[$host]"; + } + + $options = array( + CURLOPT_FAILONERROR => true, + CURLOPT_CONNECTTIMEOUT_MS => $timeout, + CURLOPT_URL => "$parameters->scheme://$host:$parameters->port", + CURLOPT_HTTP_VERSION => CURL_HTTP_VERSION_1_1, + CURLOPT_POST => true, + CURLOPT_WRITEFUNCTION => array($this, 'feedReader'), + ); + + if (isset($parameters->user, $parameters->pass)) { + $options[CURLOPT_USERPWD] = "{$parameters->user}:{$parameters->pass}"; + } + + curl_setopt_array($resource = curl_init(), $options); + + return $resource; + } + + /** + * Initializes the phpiredis protocol reader. + * + * @return resource + */ + private function createReader() + { + $reader = phpiredis_reader_create(); + + phpiredis_reader_set_status_handler($reader, $this->getStatusHandler()); + phpiredis_reader_set_error_handler($reader, $this->getErrorHandler()); + + return $reader; + } + + /** + * Returns the handler used by the protocol reader for inline responses. + * + * @return \Closure + */ + protected function getStatusHandler() + { + static $statusHandler; + + if (!$statusHandler) { + $statusHandler = function ($payload) { + return StatusResponse::get($payload); + }; + } + + return $statusHandler; + } + + /** + * Returns the handler used by the protocol reader for error responses. + * + * @return \Closure + */ + protected function getErrorHandler() + { + static $errorHandler; + + if (!$errorHandler) { + $errorHandler = function ($errorMessage) { + return new ErrorResponse($errorMessage); + }; + } + + return $errorHandler; + } + + /** + * Feeds the phpredis reader resource with the data read from the network. + * + * @param resource $resource Reader resource. + * @param string $buffer Buffer of data read from a connection. + * + * @return int + */ + protected function feedReader($resource, $buffer) + { + phpiredis_reader_feed($this->reader, $buffer); + + return strlen($buffer); + } + + /** + * {@inheritdoc} + */ + public function connect() + { + // NOOP + } + + /** + * {@inheritdoc} + */ + public function disconnect() + { + // NOOP + } + + /** + * {@inheritdoc} + */ + public function isConnected() + { + return true; + } + + /** + * Checks if the specified command is supported by this connection class. + * + * @param CommandInterface $command Command instance. + * + * @throws NotSupportedException + * + * @return string + */ + protected function getCommandId(CommandInterface $command) + { + switch ($commandID = $command->getId()) { + case 'AUTH': + case 'SELECT': + case 'MULTI': + case 'EXEC': + case 'WATCH': + case 'UNWATCH': + case 'DISCARD': + case 'MONITOR': + throw new NotSupportedException("Command '$commandID' is not allowed by Webdis."); + + default: + return $commandID; + } + } + + /** + * {@inheritdoc} + */ + public function writeRequest(CommandInterface $command) + { + $this->throwNotSupportedException(__FUNCTION__); + } + + /** + * {@inheritdoc} + */ + public function readResponse(CommandInterface $command) + { + $this->throwNotSupportedException(__FUNCTION__); + } + + /** + * {@inheritdoc} + */ + public function executeCommand(CommandInterface $command) + { + $resource = $this->resource; + $commandId = $this->getCommandId($command); + + if ($arguments = $command->getArguments()) { + $arguments = implode('/', array_map('urlencode', $arguments)); + $serializedCommand = "$commandId/$arguments.raw"; + } else { + $serializedCommand = "$commandId.raw"; + } + + curl_setopt($resource, CURLOPT_POSTFIELDS, $serializedCommand); + + if (curl_exec($resource) === false) { + $error = curl_error($resource); + $errno = curl_errno($resource); + + throw new ConnectionException($this, trim($error), $errno); + } + + if (phpiredis_reader_get_state($this->reader) !== PHPIREDIS_READER_STATE_COMPLETE) { + throw new ProtocolException($this, phpiredis_reader_get_error($this->reader)); + } + + return phpiredis_reader_get_reply($this->reader); + } + + /** + * {@inheritdoc} + */ + public function getResource() + { + return $this->resource; + } + + /** + * {@inheritdoc} + */ + public function getParameters() + { + return $this->parameters; + } + + /** + * {@inheritdoc} + */ + public function addConnectCommand(CommandInterface $command) + { + $this->throwNotSupportedException(__FUNCTION__); + } + + /** + * {@inheritdoc} + */ + public function read() + { + $this->throwNotSupportedException(__FUNCTION__); + } + + /** + * {@inheritdoc} + */ + public function __toString() + { + return "{$this->parameters->host}:{$this->parameters->port}"; + } + + /** + * {@inheritdoc} + */ + public function __sleep() + { + return array('parameters'); + } + + /** + * {@inheritdoc} + */ + public function __wakeup() + { + $this->assertExtensions(); + + $this->resource = $this->createCurl(); + $this->reader = $this->createReader(); + } +} diff --git a/vendor/predis/predis/src/Monitor/Consumer.php b/vendor/predis/predis/src/Monitor/Consumer.php new file mode 100644 index 00000000..7013ab4c --- /dev/null +++ b/vendor/predis/predis/src/Monitor/Consumer.php @@ -0,0 +1,173 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Monitor; + +use Predis\ClientInterface; +use Predis\Connection\AggregateConnectionInterface; +use Predis\NotSupportedException; + +/** + * Redis MONITOR consumer. + * + * @author Daniele Alessandri + */ +class Consumer implements \Iterator +{ + private $client; + private $valid; + private $position; + + /** + * @param ClientInterface $client Client instance used by the consumer. + */ + public function __construct(ClientInterface $client) + { + $this->assertClient($client); + + $this->client = $client; + + $this->start(); + } + + /** + * Automatically stops the consumer when the garbage collector kicks in. + */ + public function __destruct() + { + $this->stop(); + } + + /** + * Checks if the passed client instance satisfies the required conditions + * needed to initialize a monitor consumer. + * + * @param ClientInterface $client Client instance used by the consumer. + * + * @throws NotSupportedException + */ + private function assertClient(ClientInterface $client) + { + if ($client->getConnection() instanceof AggregateConnectionInterface) { + throw new NotSupportedException( + 'Cannot initialize a monitor consumer over aggregate connections.' + ); + } + + if ($client->getProfile()->supportsCommand('MONITOR') === false) { + throw new NotSupportedException("The current profile does not support 'MONITOR'."); + } + } + + /** + * Initializes the consumer and sends the MONITOR command to the server. + */ + protected function start() + { + $this->client->executeCommand( + $this->client->createCommand('MONITOR') + ); + $this->valid = true; + } + + /** + * Stops the consumer. Internally this is done by disconnecting from server + * since there is no way to terminate the stream initialized by MONITOR. + */ + public function stop() + { + $this->client->disconnect(); + $this->valid = false; + } + + /** + * {@inheritdoc} + */ + public function rewind() + { + // NOOP + } + + /** + * Returns the last message payload retrieved from the server. + * + * @return object + */ + public function current() + { + return $this->getValue(); + } + + /** + * {@inheritdoc} + */ + public function key() + { + return $this->position; + } + + /** + * {@inheritdoc} + */ + public function next() + { + ++$this->position; + } + + /** + * Checks if the the consumer is still in a valid state to continue. + * + * @return bool + */ + public function valid() + { + return $this->valid; + } + + /** + * Waits for a new message from the server generated by MONITOR and returns + * it when available. + * + * @return object + */ + private function getValue() + { + $database = 0; + $client = null; + $event = $this->client->getConnection()->read(); + + $callback = function ($matches) use (&$database, &$client) { + if (2 === $count = count($matches)) { + // Redis <= 2.4 + $database = (int) $matches[1]; + } + + if (4 === $count) { + // Redis >= 2.6 + $database = (int) $matches[2]; + $client = $matches[3]; + } + + return ' '; + }; + + $event = preg_replace_callback('/ \(db (\d+)\) | \[(\d+) (.*?)\] /', $callback, $event, 1); + @list($timestamp, $command, $arguments) = explode(' ', $event, 3); + + return (object) array( + 'timestamp' => (float) $timestamp, + 'database' => $database, + 'client' => $client, + 'command' => substr($command, 1, -1), + 'arguments' => $arguments, + ); + } +} diff --git a/vendor/predis/predis/src/NotSupportedException.php b/vendor/predis/predis/src/NotSupportedException.php new file mode 100644 index 00000000..68fe4ee3 --- /dev/null +++ b/vendor/predis/predis/src/NotSupportedException.php @@ -0,0 +1,22 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis; + +/** + * Exception class thrown when trying to use features not supported by certain + * classes or abstractions of Predis. + * + * @author Daniele Alessandri + */ +class NotSupportedException extends PredisException +{ +} diff --git a/vendor/predis/predis/src/Pipeline/Atomic.php b/vendor/predis/predis/src/Pipeline/Atomic.php new file mode 100644 index 00000000..4615f907 --- /dev/null +++ b/vendor/predis/predis/src/Pipeline/Atomic.php @@ -0,0 +1,119 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Pipeline; + +use Predis\ClientException; +use Predis\ClientInterface; +use Predis\Connection\ConnectionInterface; +use Predis\Connection\NodeConnectionInterface; +use Predis\Response\ErrorInterface as ErrorResponseInterface; +use Predis\Response\ResponseInterface; +use Predis\Response\ServerException; + +/** + * Command pipeline wrapped into a MULTI / EXEC transaction. + * + * @author Daniele Alessandri + */ +class Atomic extends Pipeline +{ + /** + * {@inheritdoc} + */ + public function __construct(ClientInterface $client) + { + if (!$client->getProfile()->supportsCommands(array('multi', 'exec', 'discard'))) { + throw new ClientException( + "The current profile does not support 'MULTI', 'EXEC' and 'DISCARD'." + ); + } + + parent::__construct($client); + } + + /** + * {@inheritdoc} + */ + protected function getConnection() + { + $connection = $this->getClient()->getConnection(); + + if (!$connection instanceof NodeConnectionInterface) { + $class = __CLASS__; + + throw new ClientException("The class '$class' does not support aggregate connections."); + } + + return $connection; + } + + /** + * {@inheritdoc} + */ + protected function executePipeline(ConnectionInterface $connection, \SplQueue $commands) + { + $profile = $this->getClient()->getProfile(); + $connection->executeCommand($profile->createCommand('multi')); + + foreach ($commands as $command) { + $connection->writeRequest($command); + } + + foreach ($commands as $command) { + $response = $connection->readResponse($command); + + if ($response instanceof ErrorResponseInterface) { + $connection->executeCommand($profile->createCommand('discard')); + throw new ServerException($response->getMessage()); + } + } + + $executed = $connection->executeCommand($profile->createCommand('exec')); + + if (!isset($executed)) { + // TODO: should be throwing a more appropriate exception. + throw new ClientException( + 'The underlying transaction has been aborted by the server.' + ); + } + + if (count($executed) !== count($commands)) { + $expected = count($commands); + $received = count($executed); + + throw new ClientException( + "Invalid number of responses [expected $expected, received $received]." + ); + } + + $responses = array(); + $sizeOfPipe = count($commands); + $exceptions = $this->throwServerExceptions(); + + for ($i = 0; $i < $sizeOfPipe; ++$i) { + $command = $commands->dequeue(); + $response = $executed[$i]; + + if (!$response instanceof ResponseInterface) { + $responses[] = $command->parseResponse($response); + } elseif ($response instanceof ErrorResponseInterface && $exceptions) { + $this->exception($connection, $response); + } else { + $responses[] = $response; + } + + unset($executed[$i]); + } + + return $responses; + } +} diff --git a/vendor/predis/predis/src/Pipeline/ConnectionErrorProof.php b/vendor/predis/predis/src/Pipeline/ConnectionErrorProof.php new file mode 100644 index 00000000..5d6be7d9 --- /dev/null +++ b/vendor/predis/predis/src/Pipeline/ConnectionErrorProof.php @@ -0,0 +1,130 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Pipeline; + +use Predis\CommunicationException; +use Predis\Connection\Aggregate\ClusterInterface; +use Predis\Connection\ConnectionInterface; +use Predis\Connection\NodeConnectionInterface; +use Predis\NotSupportedException; + +/** + * Command pipeline that does not throw exceptions on connection errors, but + * returns the exception instances as the rest of the response elements. + * + * @todo Awful naming! + * + * @author Daniele Alessandri + */ +class ConnectionErrorProof extends Pipeline +{ + /** + * {@inheritdoc} + */ + protected function getConnection() + { + return $this->getClient()->getConnection(); + } + + /** + * {@inheritdoc} + */ + protected function executePipeline(ConnectionInterface $connection, \SplQueue $commands) + { + if ($connection instanceof NodeConnectionInterface) { + return $this->executeSingleNode($connection, $commands); + } elseif ($connection instanceof ClusterInterface) { + return $this->executeCluster($connection, $commands); + } else { + $class = get_class($connection); + + throw new NotSupportedException("The connection class '$class' is not supported."); + } + } + + /** + * {@inheritdoc} + */ + protected function executeSingleNode(NodeConnectionInterface $connection, \SplQueue $commands) + { + $responses = array(); + $sizeOfPipe = count($commands); + + foreach ($commands as $command) { + try { + $connection->writeRequest($command); + } catch (CommunicationException $exception) { + return array_fill(0, $sizeOfPipe, $exception); + } + } + + for ($i = 0; $i < $sizeOfPipe; ++$i) { + $command = $commands->dequeue(); + + try { + $responses[$i] = $connection->readResponse($command); + } catch (CommunicationException $exception) { + $add = count($commands) - count($responses); + $responses = array_merge($responses, array_fill(0, $add, $exception)); + + break; + } + } + + return $responses; + } + + /** + * {@inheritdoc} + */ + protected function executeCluster(ClusterInterface $connection, \SplQueue $commands) + { + $responses = array(); + $sizeOfPipe = count($commands); + $exceptions = array(); + + foreach ($commands as $command) { + $cmdConnection = $connection->getConnection($command); + + if (isset($exceptions[spl_object_hash($cmdConnection)])) { + continue; + } + + try { + $cmdConnection->writeRequest($command); + } catch (CommunicationException $exception) { + $exceptions[spl_object_hash($cmdConnection)] = $exception; + } + } + + for ($i = 0; $i < $sizeOfPipe; ++$i) { + $command = $commands->dequeue(); + + $cmdConnection = $connection->getConnection($command); + $connectionHash = spl_object_hash($cmdConnection); + + if (isset($exceptions[$connectionHash])) { + $responses[$i] = $exceptions[$connectionHash]; + continue; + } + + try { + $responses[$i] = $cmdConnection->readResponse($command); + } catch (CommunicationException $exception) { + $responses[$i] = $exception; + $exceptions[$connectionHash] = $exception; + } + } + + return $responses; + } +} diff --git a/vendor/predis/predis/src/Pipeline/FireAndForget.php b/vendor/predis/predis/src/Pipeline/FireAndForget.php new file mode 100644 index 00000000..bbf9083f --- /dev/null +++ b/vendor/predis/predis/src/Pipeline/FireAndForget.php @@ -0,0 +1,36 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Pipeline; + +use Predis\Connection\ConnectionInterface; + +/** + * Command pipeline that writes commands to the servers but discards responses. + * + * @author Daniele Alessandri + */ +class FireAndForget extends Pipeline +{ + /** + * {@inheritdoc} + */ + protected function executePipeline(ConnectionInterface $connection, \SplQueue $commands) + { + while (!$commands->isEmpty()) { + $connection->writeRequest($commands->dequeue()); + } + + $connection->disconnect(); + + return array(); + } +} diff --git a/vendor/predis/predis/src/Pipeline/Pipeline.php b/vendor/predis/predis/src/Pipeline/Pipeline.php new file mode 100644 index 00000000..80099cf3 --- /dev/null +++ b/vendor/predis/predis/src/Pipeline/Pipeline.php @@ -0,0 +1,247 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Pipeline; + +use Predis\ClientContextInterface; +use Predis\ClientException; +use Predis\ClientInterface; +use Predis\Command\CommandInterface; +use Predis\Connection\Aggregate\ReplicationInterface; +use Predis\Connection\ConnectionInterface; +use Predis\Response\ErrorInterface as ErrorResponseInterface; +use Predis\Response\ResponseInterface; +use Predis\Response\ServerException; + +/** + * Implementation of a command pipeline in which write and read operations of + * Redis commands are pipelined to alleviate the effects of network round-trips. + * + * {@inheritdoc} + * + * @author Daniele Alessandri + */ +class Pipeline implements ClientContextInterface +{ + private $client; + private $pipeline; + + private $responses = array(); + private $running = false; + + /** + * @param ClientInterface $client Client instance used by the context. + */ + public function __construct(ClientInterface $client) + { + $this->client = $client; + $this->pipeline = new \SplQueue(); + } + + /** + * Queues a command into the pipeline buffer. + * + * @param string $method Command ID. + * @param array $arguments Arguments for the command. + * + * @return $this + */ + public function __call($method, $arguments) + { + $command = $this->client->createCommand($method, $arguments); + $this->recordCommand($command); + + return $this; + } + + /** + * Queues a command instance into the pipeline buffer. + * + * @param CommandInterface $command Command to be queued in the buffer. + */ + protected function recordCommand(CommandInterface $command) + { + $this->pipeline->enqueue($command); + } + + /** + * Queues a command instance into the pipeline buffer. + * + * @param CommandInterface $command Command instance to be queued in the buffer. + * + * @return $this + */ + public function executeCommand(CommandInterface $command) + { + $this->recordCommand($command); + + return $this; + } + + /** + * Throws an exception on -ERR responses returned by Redis. + * + * @param ConnectionInterface $connection Redis connection that returned the error. + * @param ErrorResponseInterface $response Instance of the error response. + * + * @throws ServerException + */ + protected function exception(ConnectionInterface $connection, ErrorResponseInterface $response) + { + $connection->disconnect(); + $message = $response->getMessage(); + + throw new ServerException($message); + } + + /** + * Returns the underlying connection to be used by the pipeline. + * + * @return ConnectionInterface + */ + protected function getConnection() + { + $connection = $this->getClient()->getConnection(); + + if ($connection instanceof ReplicationInterface) { + $connection->switchTo('master'); + } + + return $connection; + } + + /** + * Implements the logic to flush the queued commands and read the responses + * from the current connection. + * + * @param ConnectionInterface $connection Current connection instance. + * @param \SplQueue $commands Queued commands. + * + * @return array + */ + protected function executePipeline(ConnectionInterface $connection, \SplQueue $commands) + { + foreach ($commands as $command) { + $connection->writeRequest($command); + } + + $responses = array(); + $exceptions = $this->throwServerExceptions(); + + while (!$commands->isEmpty()) { + $command = $commands->dequeue(); + $response = $connection->readResponse($command); + + if (!$response instanceof ResponseInterface) { + $responses[] = $command->parseResponse($response); + } elseif ($response instanceof ErrorResponseInterface && $exceptions) { + $this->exception($connection, $response); + } else { + $responses[] = $response; + } + } + + return $responses; + } + + /** + * Flushes the buffer holding all of the commands queued so far. + * + * @param bool $send Specifies if the commands in the buffer should be sent to Redis. + * + * @return $this + */ + public function flushPipeline($send = true) + { + if ($send && !$this->pipeline->isEmpty()) { + $responses = $this->executePipeline($this->getConnection(), $this->pipeline); + $this->responses = array_merge($this->responses, $responses); + } else { + $this->pipeline = new \SplQueue(); + } + + return $this; + } + + /** + * Marks the running status of the pipeline. + * + * @param bool $bool Sets the running status of the pipeline. + * + * @throws ClientException + */ + private function setRunning($bool) + { + if ($bool && $this->running) { + throw new ClientException('The current pipeline context is already being executed.'); + } + + $this->running = $bool; + } + + /** + * Handles the actual execution of the whole pipeline. + * + * @param mixed $callable Optional callback for execution. + * + * @throws \Exception + * @throws \InvalidArgumentException + * + * @return array + */ + public function execute($callable = null) + { + if ($callable && !is_callable($callable)) { + throw new \InvalidArgumentException('The argument must be a callable object.'); + } + + $exception = null; + $this->setRunning(true); + + try { + if ($callable) { + call_user_func($callable, $this); + } + + $this->flushPipeline(); + } catch (\Exception $exception) { + // NOOP + } + + $this->setRunning(false); + + if ($exception) { + throw $exception; + } + + return $this->responses; + } + + /** + * Returns if the pipeline should throw exceptions on server errors. + * + * @return bool + */ + protected function throwServerExceptions() + { + return (bool) $this->client->getOptions()->exceptions; + } + + /** + * Returns the underlying client instance used by the pipeline object. + * + * @return ClientInterface + */ + public function getClient() + { + return $this->client; + } +} diff --git a/vendor/predis/predis/src/PredisException.php b/vendor/predis/predis/src/PredisException.php new file mode 100644 index 00000000..3cf38655 --- /dev/null +++ b/vendor/predis/predis/src/PredisException.php @@ -0,0 +1,21 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis; + +/** + * Base exception class for Predis-related errors. + * + * @author Daniele Alessandri + */ +abstract class PredisException extends \Exception +{ +} diff --git a/vendor/predis/predis/src/Profile/Factory.php b/vendor/predis/predis/src/Profile/Factory.php new file mode 100644 index 00000000..3d1a45b1 --- /dev/null +++ b/vendor/predis/predis/src/Profile/Factory.php @@ -0,0 +1,101 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Profile; + +use Predis\ClientException; + +/** + * Factory class for creating profile instances from strings. + * + * @author Daniele Alessandri + */ +final class Factory +{ + private static $profiles = array( + '2.0' => 'Predis\Profile\RedisVersion200', + '2.2' => 'Predis\Profile\RedisVersion220', + '2.4' => 'Predis\Profile\RedisVersion240', + '2.6' => 'Predis\Profile\RedisVersion260', + '2.8' => 'Predis\Profile\RedisVersion280', + '3.0' => 'Predis\Profile\RedisVersion300', + '3.2' => 'Predis\Profile\RedisVersion320', + 'dev' => 'Predis\Profile\RedisUnstable', + 'default' => 'Predis\Profile\RedisVersion320', + ); + + /** + * + */ + private function __construct() + { + // NOOP + } + + /** + * Returns the default server profile. + * + * @return ProfileInterface + */ + public static function getDefault() + { + return self::get('default'); + } + + /** + * Returns the development server profile. + * + * @return ProfileInterface + */ + public static function getDevelopment() + { + return self::get('dev'); + } + + /** + * Registers a new server profile. + * + * @param string $alias Profile version or alias. + * @param string $class FQN of a class implementing Predis\Profile\ProfileInterface. + * + * @throws \InvalidArgumentException + */ + public static function define($alias, $class) + { + $reflection = new \ReflectionClass($class); + + if (!$reflection->isSubclassOf('Predis\Profile\ProfileInterface')) { + throw new \InvalidArgumentException("The class '$class' is not a valid profile class."); + } + + self::$profiles[$alias] = $class; + } + + /** + * Returns the specified server profile. + * + * @param string $version Profile version or alias. + * + * @throws ClientException + * + * @return ProfileInterface + */ + public static function get($version) + { + if (!isset(self::$profiles[$version])) { + throw new ClientException("Unknown server profile: '$version'."); + } + + $profile = self::$profiles[$version]; + + return new $profile(); + } +} diff --git a/vendor/predis/predis/src/Profile/ProfileInterface.php b/vendor/predis/predis/src/Profile/ProfileInterface.php new file mode 100644 index 00000000..1dc7df5c --- /dev/null +++ b/vendor/predis/predis/src/Profile/ProfileInterface.php @@ -0,0 +1,59 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Profile; + +use Predis\Command\CommandInterface; + +/** + * A profile defines all the features and commands supported by certain versions + * of Redis. Instances of Predis\Client should use a server profile matching the + * version of Redis being used. + * + * @author Daniele Alessandri + */ +interface ProfileInterface +{ + /** + * Returns the profile version corresponding to the Redis version. + * + * @return string + */ + public function getVersion(); + + /** + * Checks if the profile supports the specified command. + * + * @param string $commandID Command ID. + * + * @return bool + */ + public function supportsCommand($commandID); + + /** + * Checks if the profile supports the specified list of commands. + * + * @param array $commandIDs List of command IDs. + * + * @return string + */ + public function supportsCommands(array $commandIDs); + + /** + * Creates a new command instance. + * + * @param string $commandID Command ID. + * @param array $arguments Arguments for the command. + * + * @return CommandInterface + */ + public function createCommand($commandID, array $arguments = array()); +} diff --git a/vendor/predis/predis/src/Profile/RedisProfile.php b/vendor/predis/predis/src/Profile/RedisProfile.php new file mode 100644 index 00000000..68983153 --- /dev/null +++ b/vendor/predis/predis/src/Profile/RedisProfile.php @@ -0,0 +1,146 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Profile; + +use Predis\ClientException; +use Predis\Command\Processor\ProcessorInterface; + +/** + * Base class implementing common functionalities for Redis server profiles. + * + * @author Daniele Alessandri + */ +abstract class RedisProfile implements ProfileInterface +{ + private $commands; + private $processor; + + /** + * + */ + public function __construct() + { + $this->commands = $this->getSupportedCommands(); + } + + /** + * Returns a map of all the commands supported by the profile and their + * actual PHP classes. + * + * @return array + */ + abstract protected function getSupportedCommands(); + + /** + * {@inheritdoc} + */ + public function supportsCommand($commandID) + { + return isset($this->commands[strtoupper($commandID)]); + } + + /** + * {@inheritdoc} + */ + public function supportsCommands(array $commandIDs) + { + foreach ($commandIDs as $commandID) { + if (!$this->supportsCommand($commandID)) { + return false; + } + } + + return true; + } + + /** + * Returns the fully-qualified name of a class representing the specified + * command ID registered in the current server profile. + * + * @param string $commandID Command ID. + * + * @return string|null + */ + public function getCommandClass($commandID) + { + if (isset($this->commands[$commandID = strtoupper($commandID)])) { + return $this->commands[$commandID]; + } + } + + /** + * {@inheritdoc} + */ + public function createCommand($commandID, array $arguments = array()) + { + $commandID = strtoupper($commandID); + + if (!isset($this->commands[$commandID])) { + throw new ClientException("Command '$commandID' is not a registered Redis command."); + } + + $commandClass = $this->commands[$commandID]; + $command = new $commandClass(); + $command->setArguments($arguments); + + if (isset($this->processor)) { + $this->processor->process($command); + } + + return $command; + } + + /** + * Defines a new command in the server profile. + * + * @param string $commandID Command ID. + * @param string $class Fully-qualified name of a Predis\Command\CommandInterface. + * + * @throws \InvalidArgumentException + */ + public function defineCommand($commandID, $class) + { + $reflection = new \ReflectionClass($class); + + if (!$reflection->isSubclassOf('Predis\Command\CommandInterface')) { + throw new \InvalidArgumentException("The class '$class' is not a valid command class."); + } + + $this->commands[strtoupper($commandID)] = $class; + } + + /** + * {@inheritdoc} + */ + public function setProcessor(ProcessorInterface $processor = null) + { + $this->processor = $processor; + } + + /** + * {@inheritdoc} + */ + public function getProcessor() + { + return $this->processor; + } + + /** + * Returns the version of server profile as its string representation. + * + * @return string + */ + public function __toString() + { + return $this->getVersion(); + } +} diff --git a/vendor/predis/predis/src/Profile/RedisUnstable.php b/vendor/predis/predis/src/Profile/RedisUnstable.php new file mode 100644 index 00000000..fdd1a581 --- /dev/null +++ b/vendor/predis/predis/src/Profile/RedisUnstable.php @@ -0,0 +1,38 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Profile; + +/** + * Server profile for the current unstable version of Redis. + * + * @author Daniele Alessandri + */ +class RedisUnstable extends RedisVersion320 +{ + /** + * {@inheritdoc} + */ + public function getVersion() + { + return '3.2'; + } + + /** + * {@inheritdoc} + */ + public function getSupportedCommands() + { + return array_merge(parent::getSupportedCommands(), array( + // EMPTY + )); + } +} diff --git a/vendor/predis/predis/src/Profile/RedisVersion200.php b/vendor/predis/predis/src/Profile/RedisVersion200.php new file mode 100644 index 00000000..c696085c --- /dev/null +++ b/vendor/predis/predis/src/Profile/RedisVersion200.php @@ -0,0 +1,173 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Profile; + +/** + * Server profile for Redis 2.0. + * + * @author Daniele Alessandri + */ +class RedisVersion200 extends RedisProfile +{ + /** + * {@inheritdoc} + */ + public function getVersion() + { + return '2.0'; + } + + /** + * {@inheritdoc} + */ + public function getSupportedCommands() + { + return array( + /* ---------------- Redis 1.2 ---------------- */ + + /* commands operating on the key space */ + 'EXISTS' => 'Predis\Command\KeyExists', + 'DEL' => 'Predis\Command\KeyDelete', + 'TYPE' => 'Predis\Command\KeyType', + 'KEYS' => 'Predis\Command\KeyKeys', + 'RANDOMKEY' => 'Predis\Command\KeyRandom', + 'RENAME' => 'Predis\Command\KeyRename', + 'RENAMENX' => 'Predis\Command\KeyRenamePreserve', + 'EXPIRE' => 'Predis\Command\KeyExpire', + 'EXPIREAT' => 'Predis\Command\KeyExpireAt', + 'TTL' => 'Predis\Command\KeyTimeToLive', + 'MOVE' => 'Predis\Command\KeyMove', + 'SORT' => 'Predis\Command\KeySort', + + /* commands operating on string values */ + 'SET' => 'Predis\Command\StringSet', + 'SETNX' => 'Predis\Command\StringSetPreserve', + 'MSET' => 'Predis\Command\StringSetMultiple', + 'MSETNX' => 'Predis\Command\StringSetMultiplePreserve', + 'GET' => 'Predis\Command\StringGet', + 'MGET' => 'Predis\Command\StringGetMultiple', + 'GETSET' => 'Predis\Command\StringGetSet', + 'INCR' => 'Predis\Command\StringIncrement', + 'INCRBY' => 'Predis\Command\StringIncrementBy', + 'DECR' => 'Predis\Command\StringDecrement', + 'DECRBY' => 'Predis\Command\StringDecrementBy', + + /* commands operating on lists */ + 'RPUSH' => 'Predis\Command\ListPushTail', + 'LPUSH' => 'Predis\Command\ListPushHead', + 'LLEN' => 'Predis\Command\ListLength', + 'LRANGE' => 'Predis\Command\ListRange', + 'LTRIM' => 'Predis\Command\ListTrim', + 'LINDEX' => 'Predis\Command\ListIndex', + 'LSET' => 'Predis\Command\ListSet', + 'LREM' => 'Predis\Command\ListRemove', + 'LPOP' => 'Predis\Command\ListPopFirst', + 'RPOP' => 'Predis\Command\ListPopLast', + 'RPOPLPUSH' => 'Predis\Command\ListPopLastPushHead', + + /* commands operating on sets */ + 'SADD' => 'Predis\Command\SetAdd', + 'SREM' => 'Predis\Command\SetRemove', + 'SPOP' => 'Predis\Command\SetPop', + 'SMOVE' => 'Predis\Command\SetMove', + 'SCARD' => 'Predis\Command\SetCardinality', + 'SISMEMBER' => 'Predis\Command\SetIsMember', + 'SINTER' => 'Predis\Command\SetIntersection', + 'SINTERSTORE' => 'Predis\Command\SetIntersectionStore', + 'SUNION' => 'Predis\Command\SetUnion', + 'SUNIONSTORE' => 'Predis\Command\SetUnionStore', + 'SDIFF' => 'Predis\Command\SetDifference', + 'SDIFFSTORE' => 'Predis\Command\SetDifferenceStore', + 'SMEMBERS' => 'Predis\Command\SetMembers', + 'SRANDMEMBER' => 'Predis\Command\SetRandomMember', + + /* commands operating on sorted sets */ + 'ZADD' => 'Predis\Command\ZSetAdd', + 'ZINCRBY' => 'Predis\Command\ZSetIncrementBy', + 'ZREM' => 'Predis\Command\ZSetRemove', + 'ZRANGE' => 'Predis\Command\ZSetRange', + 'ZREVRANGE' => 'Predis\Command\ZSetReverseRange', + 'ZRANGEBYSCORE' => 'Predis\Command\ZSetRangeByScore', + 'ZCARD' => 'Predis\Command\ZSetCardinality', + 'ZSCORE' => 'Predis\Command\ZSetScore', + 'ZREMRANGEBYSCORE' => 'Predis\Command\ZSetRemoveRangeByScore', + + /* connection related commands */ + 'PING' => 'Predis\Command\ConnectionPing', + 'AUTH' => 'Predis\Command\ConnectionAuth', + 'SELECT' => 'Predis\Command\ConnectionSelect', + 'ECHO' => 'Predis\Command\ConnectionEcho', + 'QUIT' => 'Predis\Command\ConnectionQuit', + + /* remote server control commands */ + 'INFO' => 'Predis\Command\ServerInfo', + 'SLAVEOF' => 'Predis\Command\ServerSlaveOf', + 'MONITOR' => 'Predis\Command\ServerMonitor', + 'DBSIZE' => 'Predis\Command\ServerDatabaseSize', + 'FLUSHDB' => 'Predis\Command\ServerFlushDatabase', + 'FLUSHALL' => 'Predis\Command\ServerFlushAll', + 'SAVE' => 'Predis\Command\ServerSave', + 'BGSAVE' => 'Predis\Command\ServerBackgroundSave', + 'LASTSAVE' => 'Predis\Command\ServerLastSave', + 'SHUTDOWN' => 'Predis\Command\ServerShutdown', + 'BGREWRITEAOF' => 'Predis\Command\ServerBackgroundRewriteAOF', + + /* ---------------- Redis 2.0 ---------------- */ + + /* commands operating on string values */ + 'SETEX' => 'Predis\Command\StringSetExpire', + 'APPEND' => 'Predis\Command\StringAppend', + 'SUBSTR' => 'Predis\Command\StringSubstr', + + /* commands operating on lists */ + 'BLPOP' => 'Predis\Command\ListPopFirstBlocking', + 'BRPOP' => 'Predis\Command\ListPopLastBlocking', + + /* commands operating on sorted sets */ + 'ZUNIONSTORE' => 'Predis\Command\ZSetUnionStore', + 'ZINTERSTORE' => 'Predis\Command\ZSetIntersectionStore', + 'ZCOUNT' => 'Predis\Command\ZSetCount', + 'ZRANK' => 'Predis\Command\ZSetRank', + 'ZREVRANK' => 'Predis\Command\ZSetReverseRank', + 'ZREMRANGEBYRANK' => 'Predis\Command\ZSetRemoveRangeByRank', + + /* commands operating on hashes */ + 'HSET' => 'Predis\Command\HashSet', + 'HSETNX' => 'Predis\Command\HashSetPreserve', + 'HMSET' => 'Predis\Command\HashSetMultiple', + 'HINCRBY' => 'Predis\Command\HashIncrementBy', + 'HGET' => 'Predis\Command\HashGet', + 'HMGET' => 'Predis\Command\HashGetMultiple', + 'HDEL' => 'Predis\Command\HashDelete', + 'HEXISTS' => 'Predis\Command\HashExists', + 'HLEN' => 'Predis\Command\HashLength', + 'HKEYS' => 'Predis\Command\HashKeys', + 'HVALS' => 'Predis\Command\HashValues', + 'HGETALL' => 'Predis\Command\HashGetAll', + + /* transactions */ + 'MULTI' => 'Predis\Command\TransactionMulti', + 'EXEC' => 'Predis\Command\TransactionExec', + 'DISCARD' => 'Predis\Command\TransactionDiscard', + + /* publish - subscribe */ + 'SUBSCRIBE' => 'Predis\Command\PubSubSubscribe', + 'UNSUBSCRIBE' => 'Predis\Command\PubSubUnsubscribe', + 'PSUBSCRIBE' => 'Predis\Command\PubSubSubscribeByPattern', + 'PUNSUBSCRIBE' => 'Predis\Command\PubSubUnsubscribeByPattern', + 'PUBLISH' => 'Predis\Command\PubSubPublish', + + /* remote server control commands */ + 'CONFIG' => 'Predis\Command\ServerConfig', + ); + } +} diff --git a/vendor/predis/predis/src/Profile/RedisVersion220.php b/vendor/predis/predis/src/Profile/RedisVersion220.php new file mode 100644 index 00000000..ab16c61b --- /dev/null +++ b/vendor/predis/predis/src/Profile/RedisVersion220.php @@ -0,0 +1,202 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Profile; + +/** + * Server profile for Redis 2.2. + * + * @author Daniele Alessandri + */ +class RedisVersion220 extends RedisProfile +{ + /** + * {@inheritdoc} + */ + public function getVersion() + { + return '2.2'; + } + + /** + * {@inheritdoc} + */ + public function getSupportedCommands() + { + return array( + /* ---------------- Redis 1.2 ---------------- */ + + /* commands operating on the key space */ + 'EXISTS' => 'Predis\Command\KeyExists', + 'DEL' => 'Predis\Command\KeyDelete', + 'TYPE' => 'Predis\Command\KeyType', + 'KEYS' => 'Predis\Command\KeyKeys', + 'RANDOMKEY' => 'Predis\Command\KeyRandom', + 'RENAME' => 'Predis\Command\KeyRename', + 'RENAMENX' => 'Predis\Command\KeyRenamePreserve', + 'EXPIRE' => 'Predis\Command\KeyExpire', + 'EXPIREAT' => 'Predis\Command\KeyExpireAt', + 'TTL' => 'Predis\Command\KeyTimeToLive', + 'MOVE' => 'Predis\Command\KeyMove', + 'SORT' => 'Predis\Command\KeySort', + + /* commands operating on string values */ + 'SET' => 'Predis\Command\StringSet', + 'SETNX' => 'Predis\Command\StringSetPreserve', + 'MSET' => 'Predis\Command\StringSetMultiple', + 'MSETNX' => 'Predis\Command\StringSetMultiplePreserve', + 'GET' => 'Predis\Command\StringGet', + 'MGET' => 'Predis\Command\StringGetMultiple', + 'GETSET' => 'Predis\Command\StringGetSet', + 'INCR' => 'Predis\Command\StringIncrement', + 'INCRBY' => 'Predis\Command\StringIncrementBy', + 'DECR' => 'Predis\Command\StringDecrement', + 'DECRBY' => 'Predis\Command\StringDecrementBy', + + /* commands operating on lists */ + 'RPUSH' => 'Predis\Command\ListPushTail', + 'LPUSH' => 'Predis\Command\ListPushHead', + 'LLEN' => 'Predis\Command\ListLength', + 'LRANGE' => 'Predis\Command\ListRange', + 'LTRIM' => 'Predis\Command\ListTrim', + 'LINDEX' => 'Predis\Command\ListIndex', + 'LSET' => 'Predis\Command\ListSet', + 'LREM' => 'Predis\Command\ListRemove', + 'LPOP' => 'Predis\Command\ListPopFirst', + 'RPOP' => 'Predis\Command\ListPopLast', + 'RPOPLPUSH' => 'Predis\Command\ListPopLastPushHead', + + /* commands operating on sets */ + 'SADD' => 'Predis\Command\SetAdd', + 'SREM' => 'Predis\Command\SetRemove', + 'SPOP' => 'Predis\Command\SetPop', + 'SMOVE' => 'Predis\Command\SetMove', + 'SCARD' => 'Predis\Command\SetCardinality', + 'SISMEMBER' => 'Predis\Command\SetIsMember', + 'SINTER' => 'Predis\Command\SetIntersection', + 'SINTERSTORE' => 'Predis\Command\SetIntersectionStore', + 'SUNION' => 'Predis\Command\SetUnion', + 'SUNIONSTORE' => 'Predis\Command\SetUnionStore', + 'SDIFF' => 'Predis\Command\SetDifference', + 'SDIFFSTORE' => 'Predis\Command\SetDifferenceStore', + 'SMEMBERS' => 'Predis\Command\SetMembers', + 'SRANDMEMBER' => 'Predis\Command\SetRandomMember', + + /* commands operating on sorted sets */ + 'ZADD' => 'Predis\Command\ZSetAdd', + 'ZINCRBY' => 'Predis\Command\ZSetIncrementBy', + 'ZREM' => 'Predis\Command\ZSetRemove', + 'ZRANGE' => 'Predis\Command\ZSetRange', + 'ZREVRANGE' => 'Predis\Command\ZSetReverseRange', + 'ZRANGEBYSCORE' => 'Predis\Command\ZSetRangeByScore', + 'ZCARD' => 'Predis\Command\ZSetCardinality', + 'ZSCORE' => 'Predis\Command\ZSetScore', + 'ZREMRANGEBYSCORE' => 'Predis\Command\ZSetRemoveRangeByScore', + + /* connection related commands */ + 'PING' => 'Predis\Command\ConnectionPing', + 'AUTH' => 'Predis\Command\ConnectionAuth', + 'SELECT' => 'Predis\Command\ConnectionSelect', + 'ECHO' => 'Predis\Command\ConnectionEcho', + 'QUIT' => 'Predis\Command\ConnectionQuit', + + /* remote server control commands */ + 'INFO' => 'Predis\Command\ServerInfo', + 'SLAVEOF' => 'Predis\Command\ServerSlaveOf', + 'MONITOR' => 'Predis\Command\ServerMonitor', + 'DBSIZE' => 'Predis\Command\ServerDatabaseSize', + 'FLUSHDB' => 'Predis\Command\ServerFlushDatabase', + 'FLUSHALL' => 'Predis\Command\ServerFlushAll', + 'SAVE' => 'Predis\Command\ServerSave', + 'BGSAVE' => 'Predis\Command\ServerBackgroundSave', + 'LASTSAVE' => 'Predis\Command\ServerLastSave', + 'SHUTDOWN' => 'Predis\Command\ServerShutdown', + 'BGREWRITEAOF' => 'Predis\Command\ServerBackgroundRewriteAOF', + + /* ---------------- Redis 2.0 ---------------- */ + + /* commands operating on string values */ + 'SETEX' => 'Predis\Command\StringSetExpire', + 'APPEND' => 'Predis\Command\StringAppend', + 'SUBSTR' => 'Predis\Command\StringSubstr', + + /* commands operating on lists */ + 'BLPOP' => 'Predis\Command\ListPopFirstBlocking', + 'BRPOP' => 'Predis\Command\ListPopLastBlocking', + + /* commands operating on sorted sets */ + 'ZUNIONSTORE' => 'Predis\Command\ZSetUnionStore', + 'ZINTERSTORE' => 'Predis\Command\ZSetIntersectionStore', + 'ZCOUNT' => 'Predis\Command\ZSetCount', + 'ZRANK' => 'Predis\Command\ZSetRank', + 'ZREVRANK' => 'Predis\Command\ZSetReverseRank', + 'ZREMRANGEBYRANK' => 'Predis\Command\ZSetRemoveRangeByRank', + + /* commands operating on hashes */ + 'HSET' => 'Predis\Command\HashSet', + 'HSETNX' => 'Predis\Command\HashSetPreserve', + 'HMSET' => 'Predis\Command\HashSetMultiple', + 'HINCRBY' => 'Predis\Command\HashIncrementBy', + 'HGET' => 'Predis\Command\HashGet', + 'HMGET' => 'Predis\Command\HashGetMultiple', + 'HDEL' => 'Predis\Command\HashDelete', + 'HEXISTS' => 'Predis\Command\HashExists', + 'HLEN' => 'Predis\Command\HashLength', + 'HKEYS' => 'Predis\Command\HashKeys', + 'HVALS' => 'Predis\Command\HashValues', + 'HGETALL' => 'Predis\Command\HashGetAll', + + /* transactions */ + 'MULTI' => 'Predis\Command\TransactionMulti', + 'EXEC' => 'Predis\Command\TransactionExec', + 'DISCARD' => 'Predis\Command\TransactionDiscard', + + /* publish - subscribe */ + 'SUBSCRIBE' => 'Predis\Command\PubSubSubscribe', + 'UNSUBSCRIBE' => 'Predis\Command\PubSubUnsubscribe', + 'PSUBSCRIBE' => 'Predis\Command\PubSubSubscribeByPattern', + 'PUNSUBSCRIBE' => 'Predis\Command\PubSubUnsubscribeByPattern', + 'PUBLISH' => 'Predis\Command\PubSubPublish', + + /* remote server control commands */ + 'CONFIG' => 'Predis\Command\ServerConfig', + + /* ---------------- Redis 2.2 ---------------- */ + + /* commands operating on the key space */ + 'PERSIST' => 'Predis\Command\KeyPersist', + + /* commands operating on string values */ + 'STRLEN' => 'Predis\Command\StringStrlen', + 'SETRANGE' => 'Predis\Command\StringSetRange', + 'GETRANGE' => 'Predis\Command\StringGetRange', + 'SETBIT' => 'Predis\Command\StringSetBit', + 'GETBIT' => 'Predis\Command\StringGetBit', + + /* commands operating on lists */ + 'RPUSHX' => 'Predis\Command\ListPushTailX', + 'LPUSHX' => 'Predis\Command\ListPushHeadX', + 'LINSERT' => 'Predis\Command\ListInsert', + 'BRPOPLPUSH' => 'Predis\Command\ListPopLastPushHeadBlocking', + + /* commands operating on sorted sets */ + 'ZREVRANGEBYSCORE' => 'Predis\Command\ZSetReverseRangeByScore', + + /* transactions */ + 'WATCH' => 'Predis\Command\TransactionWatch', + 'UNWATCH' => 'Predis\Command\TransactionUnwatch', + + /* remote server control commands */ + 'OBJECT' => 'Predis\Command\ServerObject', + 'SLOWLOG' => 'Predis\Command\ServerSlowlog', + ); + } +} diff --git a/vendor/predis/predis/src/Profile/RedisVersion240.php b/vendor/predis/predis/src/Profile/RedisVersion240.php new file mode 100644 index 00000000..046f0deb --- /dev/null +++ b/vendor/predis/predis/src/Profile/RedisVersion240.php @@ -0,0 +1,207 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Profile; + +/** + * Server profile for Redis 2.4. + * + * @author Daniele Alessandri + */ +class RedisVersion240 extends RedisProfile +{ + /** + * {@inheritdoc} + */ + public function getVersion() + { + return '2.4'; + } + + /** + * {@inheritdoc} + */ + public function getSupportedCommands() + { + return array( + /* ---------------- Redis 1.2 ---------------- */ + + /* commands operating on the key space */ + 'EXISTS' => 'Predis\Command\KeyExists', + 'DEL' => 'Predis\Command\KeyDelete', + 'TYPE' => 'Predis\Command\KeyType', + 'KEYS' => 'Predis\Command\KeyKeys', + 'RANDOMKEY' => 'Predis\Command\KeyRandom', + 'RENAME' => 'Predis\Command\KeyRename', + 'RENAMENX' => 'Predis\Command\KeyRenamePreserve', + 'EXPIRE' => 'Predis\Command\KeyExpire', + 'EXPIREAT' => 'Predis\Command\KeyExpireAt', + 'TTL' => 'Predis\Command\KeyTimeToLive', + 'MOVE' => 'Predis\Command\KeyMove', + 'SORT' => 'Predis\Command\KeySort', + + /* commands operating on string values */ + 'SET' => 'Predis\Command\StringSet', + 'SETNX' => 'Predis\Command\StringSetPreserve', + 'MSET' => 'Predis\Command\StringSetMultiple', + 'MSETNX' => 'Predis\Command\StringSetMultiplePreserve', + 'GET' => 'Predis\Command\StringGet', + 'MGET' => 'Predis\Command\StringGetMultiple', + 'GETSET' => 'Predis\Command\StringGetSet', + 'INCR' => 'Predis\Command\StringIncrement', + 'INCRBY' => 'Predis\Command\StringIncrementBy', + 'DECR' => 'Predis\Command\StringDecrement', + 'DECRBY' => 'Predis\Command\StringDecrementBy', + + /* commands operating on lists */ + 'RPUSH' => 'Predis\Command\ListPushTail', + 'LPUSH' => 'Predis\Command\ListPushHead', + 'LLEN' => 'Predis\Command\ListLength', + 'LRANGE' => 'Predis\Command\ListRange', + 'LTRIM' => 'Predis\Command\ListTrim', + 'LINDEX' => 'Predis\Command\ListIndex', + 'LSET' => 'Predis\Command\ListSet', + 'LREM' => 'Predis\Command\ListRemove', + 'LPOP' => 'Predis\Command\ListPopFirst', + 'RPOP' => 'Predis\Command\ListPopLast', + 'RPOPLPUSH' => 'Predis\Command\ListPopLastPushHead', + + /* commands operating on sets */ + 'SADD' => 'Predis\Command\SetAdd', + 'SREM' => 'Predis\Command\SetRemove', + 'SPOP' => 'Predis\Command\SetPop', + 'SMOVE' => 'Predis\Command\SetMove', + 'SCARD' => 'Predis\Command\SetCardinality', + 'SISMEMBER' => 'Predis\Command\SetIsMember', + 'SINTER' => 'Predis\Command\SetIntersection', + 'SINTERSTORE' => 'Predis\Command\SetIntersectionStore', + 'SUNION' => 'Predis\Command\SetUnion', + 'SUNIONSTORE' => 'Predis\Command\SetUnionStore', + 'SDIFF' => 'Predis\Command\SetDifference', + 'SDIFFSTORE' => 'Predis\Command\SetDifferenceStore', + 'SMEMBERS' => 'Predis\Command\SetMembers', + 'SRANDMEMBER' => 'Predis\Command\SetRandomMember', + + /* commands operating on sorted sets */ + 'ZADD' => 'Predis\Command\ZSetAdd', + 'ZINCRBY' => 'Predis\Command\ZSetIncrementBy', + 'ZREM' => 'Predis\Command\ZSetRemove', + 'ZRANGE' => 'Predis\Command\ZSetRange', + 'ZREVRANGE' => 'Predis\Command\ZSetReverseRange', + 'ZRANGEBYSCORE' => 'Predis\Command\ZSetRangeByScore', + 'ZCARD' => 'Predis\Command\ZSetCardinality', + 'ZSCORE' => 'Predis\Command\ZSetScore', + 'ZREMRANGEBYSCORE' => 'Predis\Command\ZSetRemoveRangeByScore', + + /* connection related commands */ + 'PING' => 'Predis\Command\ConnectionPing', + 'AUTH' => 'Predis\Command\ConnectionAuth', + 'SELECT' => 'Predis\Command\ConnectionSelect', + 'ECHO' => 'Predis\Command\ConnectionEcho', + 'QUIT' => 'Predis\Command\ConnectionQuit', + + /* remote server control commands */ + 'INFO' => 'Predis\Command\ServerInfo', + 'SLAVEOF' => 'Predis\Command\ServerSlaveOf', + 'MONITOR' => 'Predis\Command\ServerMonitor', + 'DBSIZE' => 'Predis\Command\ServerDatabaseSize', + 'FLUSHDB' => 'Predis\Command\ServerFlushDatabase', + 'FLUSHALL' => 'Predis\Command\ServerFlushAll', + 'SAVE' => 'Predis\Command\ServerSave', + 'BGSAVE' => 'Predis\Command\ServerBackgroundSave', + 'LASTSAVE' => 'Predis\Command\ServerLastSave', + 'SHUTDOWN' => 'Predis\Command\ServerShutdown', + 'BGREWRITEAOF' => 'Predis\Command\ServerBackgroundRewriteAOF', + + /* ---------------- Redis 2.0 ---------------- */ + + /* commands operating on string values */ + 'SETEX' => 'Predis\Command\StringSetExpire', + 'APPEND' => 'Predis\Command\StringAppend', + 'SUBSTR' => 'Predis\Command\StringSubstr', + + /* commands operating on lists */ + 'BLPOP' => 'Predis\Command\ListPopFirstBlocking', + 'BRPOP' => 'Predis\Command\ListPopLastBlocking', + + /* commands operating on sorted sets */ + 'ZUNIONSTORE' => 'Predis\Command\ZSetUnionStore', + 'ZINTERSTORE' => 'Predis\Command\ZSetIntersectionStore', + 'ZCOUNT' => 'Predis\Command\ZSetCount', + 'ZRANK' => 'Predis\Command\ZSetRank', + 'ZREVRANK' => 'Predis\Command\ZSetReverseRank', + 'ZREMRANGEBYRANK' => 'Predis\Command\ZSetRemoveRangeByRank', + + /* commands operating on hashes */ + 'HSET' => 'Predis\Command\HashSet', + 'HSETNX' => 'Predis\Command\HashSetPreserve', + 'HMSET' => 'Predis\Command\HashSetMultiple', + 'HINCRBY' => 'Predis\Command\HashIncrementBy', + 'HGET' => 'Predis\Command\HashGet', + 'HMGET' => 'Predis\Command\HashGetMultiple', + 'HDEL' => 'Predis\Command\HashDelete', + 'HEXISTS' => 'Predis\Command\HashExists', + 'HLEN' => 'Predis\Command\HashLength', + 'HKEYS' => 'Predis\Command\HashKeys', + 'HVALS' => 'Predis\Command\HashValues', + 'HGETALL' => 'Predis\Command\HashGetAll', + + /* transactions */ + 'MULTI' => 'Predis\Command\TransactionMulti', + 'EXEC' => 'Predis\Command\TransactionExec', + 'DISCARD' => 'Predis\Command\TransactionDiscard', + + /* publish - subscribe */ + 'SUBSCRIBE' => 'Predis\Command\PubSubSubscribe', + 'UNSUBSCRIBE' => 'Predis\Command\PubSubUnsubscribe', + 'PSUBSCRIBE' => 'Predis\Command\PubSubSubscribeByPattern', + 'PUNSUBSCRIBE' => 'Predis\Command\PubSubUnsubscribeByPattern', + 'PUBLISH' => 'Predis\Command\PubSubPublish', + + /* remote server control commands */ + 'CONFIG' => 'Predis\Command\ServerConfig', + + /* ---------------- Redis 2.2 ---------------- */ + + /* commands operating on the key space */ + 'PERSIST' => 'Predis\Command\KeyPersist', + + /* commands operating on string values */ + 'STRLEN' => 'Predis\Command\StringStrlen', + 'SETRANGE' => 'Predis\Command\StringSetRange', + 'GETRANGE' => 'Predis\Command\StringGetRange', + 'SETBIT' => 'Predis\Command\StringSetBit', + 'GETBIT' => 'Predis\Command\StringGetBit', + + /* commands operating on lists */ + 'RPUSHX' => 'Predis\Command\ListPushTailX', + 'LPUSHX' => 'Predis\Command\ListPushHeadX', + 'LINSERT' => 'Predis\Command\ListInsert', + 'BRPOPLPUSH' => 'Predis\Command\ListPopLastPushHeadBlocking', + + /* commands operating on sorted sets */ + 'ZREVRANGEBYSCORE' => 'Predis\Command\ZSetReverseRangeByScore', + + /* transactions */ + 'WATCH' => 'Predis\Command\TransactionWatch', + 'UNWATCH' => 'Predis\Command\TransactionUnwatch', + + /* remote server control commands */ + 'OBJECT' => 'Predis\Command\ServerObject', + 'SLOWLOG' => 'Predis\Command\ServerSlowlog', + + /* ---------------- Redis 2.4 ---------------- */ + + /* remote server control commands */ + 'CLIENT' => 'Predis\Command\ServerClient', + ); + } +} diff --git a/vendor/predis/predis/src/Profile/RedisVersion260.php b/vendor/predis/predis/src/Profile/RedisVersion260.php new file mode 100644 index 00000000..2f1fd116 --- /dev/null +++ b/vendor/predis/predis/src/Profile/RedisVersion260.php @@ -0,0 +1,235 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Profile; + +/** + * Server profile for Redis 2.6. + * + * @author Daniele Alessandri + */ +class RedisVersion260 extends RedisProfile +{ + /** + * {@inheritdoc} + */ + public function getVersion() + { + return '2.6'; + } + + /** + * {@inheritdoc} + */ + public function getSupportedCommands() + { + return array( + /* ---------------- Redis 1.2 ---------------- */ + + /* commands operating on the key space */ + 'EXISTS' => 'Predis\Command\KeyExists', + 'DEL' => 'Predis\Command\KeyDelete', + 'TYPE' => 'Predis\Command\KeyType', + 'KEYS' => 'Predis\Command\KeyKeys', + 'RANDOMKEY' => 'Predis\Command\KeyRandom', + 'RENAME' => 'Predis\Command\KeyRename', + 'RENAMENX' => 'Predis\Command\KeyRenamePreserve', + 'EXPIRE' => 'Predis\Command\KeyExpire', + 'EXPIREAT' => 'Predis\Command\KeyExpireAt', + 'TTL' => 'Predis\Command\KeyTimeToLive', + 'MOVE' => 'Predis\Command\KeyMove', + 'SORT' => 'Predis\Command\KeySort', + 'DUMP' => 'Predis\Command\KeyDump', + 'RESTORE' => 'Predis\Command\KeyRestore', + + /* commands operating on string values */ + 'SET' => 'Predis\Command\StringSet', + 'SETNX' => 'Predis\Command\StringSetPreserve', + 'MSET' => 'Predis\Command\StringSetMultiple', + 'MSETNX' => 'Predis\Command\StringSetMultiplePreserve', + 'GET' => 'Predis\Command\StringGet', + 'MGET' => 'Predis\Command\StringGetMultiple', + 'GETSET' => 'Predis\Command\StringGetSet', + 'INCR' => 'Predis\Command\StringIncrement', + 'INCRBY' => 'Predis\Command\StringIncrementBy', + 'DECR' => 'Predis\Command\StringDecrement', + 'DECRBY' => 'Predis\Command\StringDecrementBy', + + /* commands operating on lists */ + 'RPUSH' => 'Predis\Command\ListPushTail', + 'LPUSH' => 'Predis\Command\ListPushHead', + 'LLEN' => 'Predis\Command\ListLength', + 'LRANGE' => 'Predis\Command\ListRange', + 'LTRIM' => 'Predis\Command\ListTrim', + 'LINDEX' => 'Predis\Command\ListIndex', + 'LSET' => 'Predis\Command\ListSet', + 'LREM' => 'Predis\Command\ListRemove', + 'LPOP' => 'Predis\Command\ListPopFirst', + 'RPOP' => 'Predis\Command\ListPopLast', + 'RPOPLPUSH' => 'Predis\Command\ListPopLastPushHead', + + /* commands operating on sets */ + 'SADD' => 'Predis\Command\SetAdd', + 'SREM' => 'Predis\Command\SetRemove', + 'SPOP' => 'Predis\Command\SetPop', + 'SMOVE' => 'Predis\Command\SetMove', + 'SCARD' => 'Predis\Command\SetCardinality', + 'SISMEMBER' => 'Predis\Command\SetIsMember', + 'SINTER' => 'Predis\Command\SetIntersection', + 'SINTERSTORE' => 'Predis\Command\SetIntersectionStore', + 'SUNION' => 'Predis\Command\SetUnion', + 'SUNIONSTORE' => 'Predis\Command\SetUnionStore', + 'SDIFF' => 'Predis\Command\SetDifference', + 'SDIFFSTORE' => 'Predis\Command\SetDifferenceStore', + 'SMEMBERS' => 'Predis\Command\SetMembers', + 'SRANDMEMBER' => 'Predis\Command\SetRandomMember', + + /* commands operating on sorted sets */ + 'ZADD' => 'Predis\Command\ZSetAdd', + 'ZINCRBY' => 'Predis\Command\ZSetIncrementBy', + 'ZREM' => 'Predis\Command\ZSetRemove', + 'ZRANGE' => 'Predis\Command\ZSetRange', + 'ZREVRANGE' => 'Predis\Command\ZSetReverseRange', + 'ZRANGEBYSCORE' => 'Predis\Command\ZSetRangeByScore', + 'ZCARD' => 'Predis\Command\ZSetCardinality', + 'ZSCORE' => 'Predis\Command\ZSetScore', + 'ZREMRANGEBYSCORE' => 'Predis\Command\ZSetRemoveRangeByScore', + + /* connection related commands */ + 'PING' => 'Predis\Command\ConnectionPing', + 'AUTH' => 'Predis\Command\ConnectionAuth', + 'SELECT' => 'Predis\Command\ConnectionSelect', + 'ECHO' => 'Predis\Command\ConnectionEcho', + 'QUIT' => 'Predis\Command\ConnectionQuit', + + /* remote server control commands */ + 'INFO' => 'Predis\Command\ServerInfoV26x', + 'SLAVEOF' => 'Predis\Command\ServerSlaveOf', + 'MONITOR' => 'Predis\Command\ServerMonitor', + 'DBSIZE' => 'Predis\Command\ServerDatabaseSize', + 'FLUSHDB' => 'Predis\Command\ServerFlushDatabase', + 'FLUSHALL' => 'Predis\Command\ServerFlushAll', + 'SAVE' => 'Predis\Command\ServerSave', + 'BGSAVE' => 'Predis\Command\ServerBackgroundSave', + 'LASTSAVE' => 'Predis\Command\ServerLastSave', + 'SHUTDOWN' => 'Predis\Command\ServerShutdown', + 'BGREWRITEAOF' => 'Predis\Command\ServerBackgroundRewriteAOF', + + /* ---------------- Redis 2.0 ---------------- */ + + /* commands operating on string values */ + 'SETEX' => 'Predis\Command\StringSetExpire', + 'APPEND' => 'Predis\Command\StringAppend', + 'SUBSTR' => 'Predis\Command\StringSubstr', + + /* commands operating on lists */ + 'BLPOP' => 'Predis\Command\ListPopFirstBlocking', + 'BRPOP' => 'Predis\Command\ListPopLastBlocking', + + /* commands operating on sorted sets */ + 'ZUNIONSTORE' => 'Predis\Command\ZSetUnionStore', + 'ZINTERSTORE' => 'Predis\Command\ZSetIntersectionStore', + 'ZCOUNT' => 'Predis\Command\ZSetCount', + 'ZRANK' => 'Predis\Command\ZSetRank', + 'ZREVRANK' => 'Predis\Command\ZSetReverseRank', + 'ZREMRANGEBYRANK' => 'Predis\Command\ZSetRemoveRangeByRank', + + /* commands operating on hashes */ + 'HSET' => 'Predis\Command\HashSet', + 'HSETNX' => 'Predis\Command\HashSetPreserve', + 'HMSET' => 'Predis\Command\HashSetMultiple', + 'HINCRBY' => 'Predis\Command\HashIncrementBy', + 'HGET' => 'Predis\Command\HashGet', + 'HMGET' => 'Predis\Command\HashGetMultiple', + 'HDEL' => 'Predis\Command\HashDelete', + 'HEXISTS' => 'Predis\Command\HashExists', + 'HLEN' => 'Predis\Command\HashLength', + 'HKEYS' => 'Predis\Command\HashKeys', + 'HVALS' => 'Predis\Command\HashValues', + 'HGETALL' => 'Predis\Command\HashGetAll', + + /* transactions */ + 'MULTI' => 'Predis\Command\TransactionMulti', + 'EXEC' => 'Predis\Command\TransactionExec', + 'DISCARD' => 'Predis\Command\TransactionDiscard', + + /* publish - subscribe */ + 'SUBSCRIBE' => 'Predis\Command\PubSubSubscribe', + 'UNSUBSCRIBE' => 'Predis\Command\PubSubUnsubscribe', + 'PSUBSCRIBE' => 'Predis\Command\PubSubSubscribeByPattern', + 'PUNSUBSCRIBE' => 'Predis\Command\PubSubUnsubscribeByPattern', + 'PUBLISH' => 'Predis\Command\PubSubPublish', + + /* remote server control commands */ + 'CONFIG' => 'Predis\Command\ServerConfig', + + /* ---------------- Redis 2.2 ---------------- */ + + /* commands operating on the key space */ + 'PERSIST' => 'Predis\Command\KeyPersist', + + /* commands operating on string values */ + 'STRLEN' => 'Predis\Command\StringStrlen', + 'SETRANGE' => 'Predis\Command\StringSetRange', + 'GETRANGE' => 'Predis\Command\StringGetRange', + 'SETBIT' => 'Predis\Command\StringSetBit', + 'GETBIT' => 'Predis\Command\StringGetBit', + + /* commands operating on lists */ + 'RPUSHX' => 'Predis\Command\ListPushTailX', + 'LPUSHX' => 'Predis\Command\ListPushHeadX', + 'LINSERT' => 'Predis\Command\ListInsert', + 'BRPOPLPUSH' => 'Predis\Command\ListPopLastPushHeadBlocking', + + /* commands operating on sorted sets */ + 'ZREVRANGEBYSCORE' => 'Predis\Command\ZSetReverseRangeByScore', + + /* transactions */ + 'WATCH' => 'Predis\Command\TransactionWatch', + 'UNWATCH' => 'Predis\Command\TransactionUnwatch', + + /* remote server control commands */ + 'OBJECT' => 'Predis\Command\ServerObject', + 'SLOWLOG' => 'Predis\Command\ServerSlowlog', + + /* ---------------- Redis 2.4 ---------------- */ + + /* remote server control commands */ + 'CLIENT' => 'Predis\Command\ServerClient', + + /* ---------------- Redis 2.6 ---------------- */ + + /* commands operating on the key space */ + 'PTTL' => 'Predis\Command\KeyPreciseTimeToLive', + 'PEXPIRE' => 'Predis\Command\KeyPreciseExpire', + 'PEXPIREAT' => 'Predis\Command\KeyPreciseExpireAt', + 'MIGRATE' => 'Predis\Command\KeyMigrate', + + /* commands operating on string values */ + 'PSETEX' => 'Predis\Command\StringPreciseSetExpire', + 'INCRBYFLOAT' => 'Predis\Command\StringIncrementByFloat', + 'BITOP' => 'Predis\Command\StringBitOp', + 'BITCOUNT' => 'Predis\Command\StringBitCount', + + /* commands operating on hashes */ + 'HINCRBYFLOAT' => 'Predis\Command\HashIncrementByFloat', + + /* scripting */ + 'EVAL' => 'Predis\Command\ServerEval', + 'EVALSHA' => 'Predis\Command\ServerEvalSHA', + 'SCRIPT' => 'Predis\Command\ServerScript', + + /* remote server control commands */ + 'TIME' => 'Predis\Command\ServerTime', + 'SENTINEL' => 'Predis\Command\ServerSentinel', + ); + } +} diff --git a/vendor/predis/predis/src/Profile/RedisVersion280.php b/vendor/predis/predis/src/Profile/RedisVersion280.php new file mode 100644 index 00000000..6ae05900 --- /dev/null +++ b/vendor/predis/predis/src/Profile/RedisVersion280.php @@ -0,0 +1,267 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Profile; + +/** + * Server profile for Redis 2.8. + * + * @author Daniele Alessandri + */ +class RedisVersion280 extends RedisProfile +{ + /** + * {@inheritdoc} + */ + public function getVersion() + { + return '2.8'; + } + + /** + * {@inheritdoc} + */ + public function getSupportedCommands() + { + return array( + /* ---------------- Redis 1.2 ---------------- */ + + /* commands operating on the key space */ + 'EXISTS' => 'Predis\Command\KeyExists', + 'DEL' => 'Predis\Command\KeyDelete', + 'TYPE' => 'Predis\Command\KeyType', + 'KEYS' => 'Predis\Command\KeyKeys', + 'RANDOMKEY' => 'Predis\Command\KeyRandom', + 'RENAME' => 'Predis\Command\KeyRename', + 'RENAMENX' => 'Predis\Command\KeyRenamePreserve', + 'EXPIRE' => 'Predis\Command\KeyExpire', + 'EXPIREAT' => 'Predis\Command\KeyExpireAt', + 'TTL' => 'Predis\Command\KeyTimeToLive', + 'MOVE' => 'Predis\Command\KeyMove', + 'SORT' => 'Predis\Command\KeySort', + 'DUMP' => 'Predis\Command\KeyDump', + 'RESTORE' => 'Predis\Command\KeyRestore', + + /* commands operating on string values */ + 'SET' => 'Predis\Command\StringSet', + 'SETNX' => 'Predis\Command\StringSetPreserve', + 'MSET' => 'Predis\Command\StringSetMultiple', + 'MSETNX' => 'Predis\Command\StringSetMultiplePreserve', + 'GET' => 'Predis\Command\StringGet', + 'MGET' => 'Predis\Command\StringGetMultiple', + 'GETSET' => 'Predis\Command\StringGetSet', + 'INCR' => 'Predis\Command\StringIncrement', + 'INCRBY' => 'Predis\Command\StringIncrementBy', + 'DECR' => 'Predis\Command\StringDecrement', + 'DECRBY' => 'Predis\Command\StringDecrementBy', + + /* commands operating on lists */ + 'RPUSH' => 'Predis\Command\ListPushTail', + 'LPUSH' => 'Predis\Command\ListPushHead', + 'LLEN' => 'Predis\Command\ListLength', + 'LRANGE' => 'Predis\Command\ListRange', + 'LTRIM' => 'Predis\Command\ListTrim', + 'LINDEX' => 'Predis\Command\ListIndex', + 'LSET' => 'Predis\Command\ListSet', + 'LREM' => 'Predis\Command\ListRemove', + 'LPOP' => 'Predis\Command\ListPopFirst', + 'RPOP' => 'Predis\Command\ListPopLast', + 'RPOPLPUSH' => 'Predis\Command\ListPopLastPushHead', + + /* commands operating on sets */ + 'SADD' => 'Predis\Command\SetAdd', + 'SREM' => 'Predis\Command\SetRemove', + 'SPOP' => 'Predis\Command\SetPop', + 'SMOVE' => 'Predis\Command\SetMove', + 'SCARD' => 'Predis\Command\SetCardinality', + 'SISMEMBER' => 'Predis\Command\SetIsMember', + 'SINTER' => 'Predis\Command\SetIntersection', + 'SINTERSTORE' => 'Predis\Command\SetIntersectionStore', + 'SUNION' => 'Predis\Command\SetUnion', + 'SUNIONSTORE' => 'Predis\Command\SetUnionStore', + 'SDIFF' => 'Predis\Command\SetDifference', + 'SDIFFSTORE' => 'Predis\Command\SetDifferenceStore', + 'SMEMBERS' => 'Predis\Command\SetMembers', + 'SRANDMEMBER' => 'Predis\Command\SetRandomMember', + + /* commands operating on sorted sets */ + 'ZADD' => 'Predis\Command\ZSetAdd', + 'ZINCRBY' => 'Predis\Command\ZSetIncrementBy', + 'ZREM' => 'Predis\Command\ZSetRemove', + 'ZRANGE' => 'Predis\Command\ZSetRange', + 'ZREVRANGE' => 'Predis\Command\ZSetReverseRange', + 'ZRANGEBYSCORE' => 'Predis\Command\ZSetRangeByScore', + 'ZCARD' => 'Predis\Command\ZSetCardinality', + 'ZSCORE' => 'Predis\Command\ZSetScore', + 'ZREMRANGEBYSCORE' => 'Predis\Command\ZSetRemoveRangeByScore', + + /* connection related commands */ + 'PING' => 'Predis\Command\ConnectionPing', + 'AUTH' => 'Predis\Command\ConnectionAuth', + 'SELECT' => 'Predis\Command\ConnectionSelect', + 'ECHO' => 'Predis\Command\ConnectionEcho', + 'QUIT' => 'Predis\Command\ConnectionQuit', + + /* remote server control commands */ + 'INFO' => 'Predis\Command\ServerInfoV26x', + 'SLAVEOF' => 'Predis\Command\ServerSlaveOf', + 'MONITOR' => 'Predis\Command\ServerMonitor', + 'DBSIZE' => 'Predis\Command\ServerDatabaseSize', + 'FLUSHDB' => 'Predis\Command\ServerFlushDatabase', + 'FLUSHALL' => 'Predis\Command\ServerFlushAll', + 'SAVE' => 'Predis\Command\ServerSave', + 'BGSAVE' => 'Predis\Command\ServerBackgroundSave', + 'LASTSAVE' => 'Predis\Command\ServerLastSave', + 'SHUTDOWN' => 'Predis\Command\ServerShutdown', + 'BGREWRITEAOF' => 'Predis\Command\ServerBackgroundRewriteAOF', + + /* ---------------- Redis 2.0 ---------------- */ + + /* commands operating on string values */ + 'SETEX' => 'Predis\Command\StringSetExpire', + 'APPEND' => 'Predis\Command\StringAppend', + 'SUBSTR' => 'Predis\Command\StringSubstr', + + /* commands operating on lists */ + 'BLPOP' => 'Predis\Command\ListPopFirstBlocking', + 'BRPOP' => 'Predis\Command\ListPopLastBlocking', + + /* commands operating on sorted sets */ + 'ZUNIONSTORE' => 'Predis\Command\ZSetUnionStore', + 'ZINTERSTORE' => 'Predis\Command\ZSetIntersectionStore', + 'ZCOUNT' => 'Predis\Command\ZSetCount', + 'ZRANK' => 'Predis\Command\ZSetRank', + 'ZREVRANK' => 'Predis\Command\ZSetReverseRank', + 'ZREMRANGEBYRANK' => 'Predis\Command\ZSetRemoveRangeByRank', + + /* commands operating on hashes */ + 'HSET' => 'Predis\Command\HashSet', + 'HSETNX' => 'Predis\Command\HashSetPreserve', + 'HMSET' => 'Predis\Command\HashSetMultiple', + 'HINCRBY' => 'Predis\Command\HashIncrementBy', + 'HGET' => 'Predis\Command\HashGet', + 'HMGET' => 'Predis\Command\HashGetMultiple', + 'HDEL' => 'Predis\Command\HashDelete', + 'HEXISTS' => 'Predis\Command\HashExists', + 'HLEN' => 'Predis\Command\HashLength', + 'HKEYS' => 'Predis\Command\HashKeys', + 'HVALS' => 'Predis\Command\HashValues', + 'HGETALL' => 'Predis\Command\HashGetAll', + + /* transactions */ + 'MULTI' => 'Predis\Command\TransactionMulti', + 'EXEC' => 'Predis\Command\TransactionExec', + 'DISCARD' => 'Predis\Command\TransactionDiscard', + + /* publish - subscribe */ + 'SUBSCRIBE' => 'Predis\Command\PubSubSubscribe', + 'UNSUBSCRIBE' => 'Predis\Command\PubSubUnsubscribe', + 'PSUBSCRIBE' => 'Predis\Command\PubSubSubscribeByPattern', + 'PUNSUBSCRIBE' => 'Predis\Command\PubSubUnsubscribeByPattern', + 'PUBLISH' => 'Predis\Command\PubSubPublish', + + /* remote server control commands */ + 'CONFIG' => 'Predis\Command\ServerConfig', + + /* ---------------- Redis 2.2 ---------------- */ + + /* commands operating on the key space */ + 'PERSIST' => 'Predis\Command\KeyPersist', + + /* commands operating on string values */ + 'STRLEN' => 'Predis\Command\StringStrlen', + 'SETRANGE' => 'Predis\Command\StringSetRange', + 'GETRANGE' => 'Predis\Command\StringGetRange', + 'SETBIT' => 'Predis\Command\StringSetBit', + 'GETBIT' => 'Predis\Command\StringGetBit', + + /* commands operating on lists */ + 'RPUSHX' => 'Predis\Command\ListPushTailX', + 'LPUSHX' => 'Predis\Command\ListPushHeadX', + 'LINSERT' => 'Predis\Command\ListInsert', + 'BRPOPLPUSH' => 'Predis\Command\ListPopLastPushHeadBlocking', + + /* commands operating on sorted sets */ + 'ZREVRANGEBYSCORE' => 'Predis\Command\ZSetReverseRangeByScore', + + /* transactions */ + 'WATCH' => 'Predis\Command\TransactionWatch', + 'UNWATCH' => 'Predis\Command\TransactionUnwatch', + + /* remote server control commands */ + 'OBJECT' => 'Predis\Command\ServerObject', + 'SLOWLOG' => 'Predis\Command\ServerSlowlog', + + /* ---------------- Redis 2.4 ---------------- */ + + /* remote server control commands */ + 'CLIENT' => 'Predis\Command\ServerClient', + + /* ---------------- Redis 2.6 ---------------- */ + + /* commands operating on the key space */ + 'PTTL' => 'Predis\Command\KeyPreciseTimeToLive', + 'PEXPIRE' => 'Predis\Command\KeyPreciseExpire', + 'PEXPIREAT' => 'Predis\Command\KeyPreciseExpireAt', + 'MIGRATE' => 'Predis\Command\KeyMigrate', + + /* commands operating on string values */ + 'PSETEX' => 'Predis\Command\StringPreciseSetExpire', + 'INCRBYFLOAT' => 'Predis\Command\StringIncrementByFloat', + 'BITOP' => 'Predis\Command\StringBitOp', + 'BITCOUNT' => 'Predis\Command\StringBitCount', + + /* commands operating on hashes */ + 'HINCRBYFLOAT' => 'Predis\Command\HashIncrementByFloat', + + /* scripting */ + 'EVAL' => 'Predis\Command\ServerEval', + 'EVALSHA' => 'Predis\Command\ServerEvalSHA', + 'SCRIPT' => 'Predis\Command\ServerScript', + + /* remote server control commands */ + 'TIME' => 'Predis\Command\ServerTime', + 'SENTINEL' => 'Predis\Command\ServerSentinel', + + /* ---------------- Redis 2.8 ---------------- */ + + /* commands operating on the key space */ + 'SCAN' => 'Predis\Command\KeyScan', + + /* commands operating on string values */ + 'BITPOS' => 'Predis\Command\StringBitPos', + + /* commands operating on sets */ + 'SSCAN' => 'Predis\Command\SetScan', + + /* commands operating on sorted sets */ + 'ZSCAN' => 'Predis\Command\ZSetScan', + 'ZLEXCOUNT' => 'Predis\Command\ZSetLexCount', + 'ZRANGEBYLEX' => 'Predis\Command\ZSetRangeByLex', + 'ZREMRANGEBYLEX' => 'Predis\Command\ZSetRemoveRangeByLex', + 'ZREVRANGEBYLEX' => 'Predis\Command\ZSetReverseRangeByLex', + + /* commands operating on hashes */ + 'HSCAN' => 'Predis\Command\HashScan', + + /* publish - subscribe */ + 'PUBSUB' => 'Predis\Command\PubSubPubsub', + + /* commands operating on HyperLogLog */ + 'PFADD' => 'Predis\Command\HyperLogLogAdd', + 'PFCOUNT' => 'Predis\Command\HyperLogLogCount', + 'PFMERGE' => 'Predis\Command\HyperLogLogMerge', + + /* remote server control commands */ + 'COMMAND' => 'Predis\Command\ServerCommand', + ); + } +} diff --git a/vendor/predis/predis/src/Profile/RedisVersion300.php b/vendor/predis/predis/src/Profile/RedisVersion300.php new file mode 100644 index 00000000..acccf0ca --- /dev/null +++ b/vendor/predis/predis/src/Profile/RedisVersion300.php @@ -0,0 +1,270 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Profile; + +/** + * Server profile for Redis 3.0. + * + * @author Daniele Alessandri + */ +class RedisVersion300 extends RedisProfile +{ + /** + * {@inheritdoc} + */ + public function getVersion() + { + return '3.0'; + } + + /** + * {@inheritdoc} + */ + public function getSupportedCommands() + { + return array( + /* ---------------- Redis 1.2 ---------------- */ + + /* commands operating on the key space */ + 'EXISTS' => 'Predis\Command\KeyExists', + 'DEL' => 'Predis\Command\KeyDelete', + 'TYPE' => 'Predis\Command\KeyType', + 'KEYS' => 'Predis\Command\KeyKeys', + 'RANDOMKEY' => 'Predis\Command\KeyRandom', + 'RENAME' => 'Predis\Command\KeyRename', + 'RENAMENX' => 'Predis\Command\KeyRenamePreserve', + 'EXPIRE' => 'Predis\Command\KeyExpire', + 'EXPIREAT' => 'Predis\Command\KeyExpireAt', + 'TTL' => 'Predis\Command\KeyTimeToLive', + 'MOVE' => 'Predis\Command\KeyMove', + 'SORT' => 'Predis\Command\KeySort', + 'DUMP' => 'Predis\Command\KeyDump', + 'RESTORE' => 'Predis\Command\KeyRestore', + + /* commands operating on string values */ + 'SET' => 'Predis\Command\StringSet', + 'SETNX' => 'Predis\Command\StringSetPreserve', + 'MSET' => 'Predis\Command\StringSetMultiple', + 'MSETNX' => 'Predis\Command\StringSetMultiplePreserve', + 'GET' => 'Predis\Command\StringGet', + 'MGET' => 'Predis\Command\StringGetMultiple', + 'GETSET' => 'Predis\Command\StringGetSet', + 'INCR' => 'Predis\Command\StringIncrement', + 'INCRBY' => 'Predis\Command\StringIncrementBy', + 'DECR' => 'Predis\Command\StringDecrement', + 'DECRBY' => 'Predis\Command\StringDecrementBy', + + /* commands operating on lists */ + 'RPUSH' => 'Predis\Command\ListPushTail', + 'LPUSH' => 'Predis\Command\ListPushHead', + 'LLEN' => 'Predis\Command\ListLength', + 'LRANGE' => 'Predis\Command\ListRange', + 'LTRIM' => 'Predis\Command\ListTrim', + 'LINDEX' => 'Predis\Command\ListIndex', + 'LSET' => 'Predis\Command\ListSet', + 'LREM' => 'Predis\Command\ListRemove', + 'LPOP' => 'Predis\Command\ListPopFirst', + 'RPOP' => 'Predis\Command\ListPopLast', + 'RPOPLPUSH' => 'Predis\Command\ListPopLastPushHead', + + /* commands operating on sets */ + 'SADD' => 'Predis\Command\SetAdd', + 'SREM' => 'Predis\Command\SetRemove', + 'SPOP' => 'Predis\Command\SetPop', + 'SMOVE' => 'Predis\Command\SetMove', + 'SCARD' => 'Predis\Command\SetCardinality', + 'SISMEMBER' => 'Predis\Command\SetIsMember', + 'SINTER' => 'Predis\Command\SetIntersection', + 'SINTERSTORE' => 'Predis\Command\SetIntersectionStore', + 'SUNION' => 'Predis\Command\SetUnion', + 'SUNIONSTORE' => 'Predis\Command\SetUnionStore', + 'SDIFF' => 'Predis\Command\SetDifference', + 'SDIFFSTORE' => 'Predis\Command\SetDifferenceStore', + 'SMEMBERS' => 'Predis\Command\SetMembers', + 'SRANDMEMBER' => 'Predis\Command\SetRandomMember', + + /* commands operating on sorted sets */ + 'ZADD' => 'Predis\Command\ZSetAdd', + 'ZINCRBY' => 'Predis\Command\ZSetIncrementBy', + 'ZREM' => 'Predis\Command\ZSetRemove', + 'ZRANGE' => 'Predis\Command\ZSetRange', + 'ZREVRANGE' => 'Predis\Command\ZSetReverseRange', + 'ZRANGEBYSCORE' => 'Predis\Command\ZSetRangeByScore', + 'ZCARD' => 'Predis\Command\ZSetCardinality', + 'ZSCORE' => 'Predis\Command\ZSetScore', + 'ZREMRANGEBYSCORE' => 'Predis\Command\ZSetRemoveRangeByScore', + + /* connection related commands */ + 'PING' => 'Predis\Command\ConnectionPing', + 'AUTH' => 'Predis\Command\ConnectionAuth', + 'SELECT' => 'Predis\Command\ConnectionSelect', + 'ECHO' => 'Predis\Command\ConnectionEcho', + 'QUIT' => 'Predis\Command\ConnectionQuit', + + /* remote server control commands */ + 'INFO' => 'Predis\Command\ServerInfoV26x', + 'SLAVEOF' => 'Predis\Command\ServerSlaveOf', + 'MONITOR' => 'Predis\Command\ServerMonitor', + 'DBSIZE' => 'Predis\Command\ServerDatabaseSize', + 'FLUSHDB' => 'Predis\Command\ServerFlushDatabase', + 'FLUSHALL' => 'Predis\Command\ServerFlushAll', + 'SAVE' => 'Predis\Command\ServerSave', + 'BGSAVE' => 'Predis\Command\ServerBackgroundSave', + 'LASTSAVE' => 'Predis\Command\ServerLastSave', + 'SHUTDOWN' => 'Predis\Command\ServerShutdown', + 'BGREWRITEAOF' => 'Predis\Command\ServerBackgroundRewriteAOF', + + /* ---------------- Redis 2.0 ---------------- */ + + /* commands operating on string values */ + 'SETEX' => 'Predis\Command\StringSetExpire', + 'APPEND' => 'Predis\Command\StringAppend', + 'SUBSTR' => 'Predis\Command\StringSubstr', + + /* commands operating on lists */ + 'BLPOP' => 'Predis\Command\ListPopFirstBlocking', + 'BRPOP' => 'Predis\Command\ListPopLastBlocking', + + /* commands operating on sorted sets */ + 'ZUNIONSTORE' => 'Predis\Command\ZSetUnionStore', + 'ZINTERSTORE' => 'Predis\Command\ZSetIntersectionStore', + 'ZCOUNT' => 'Predis\Command\ZSetCount', + 'ZRANK' => 'Predis\Command\ZSetRank', + 'ZREVRANK' => 'Predis\Command\ZSetReverseRank', + 'ZREMRANGEBYRANK' => 'Predis\Command\ZSetRemoveRangeByRank', + + /* commands operating on hashes */ + 'HSET' => 'Predis\Command\HashSet', + 'HSETNX' => 'Predis\Command\HashSetPreserve', + 'HMSET' => 'Predis\Command\HashSetMultiple', + 'HINCRBY' => 'Predis\Command\HashIncrementBy', + 'HGET' => 'Predis\Command\HashGet', + 'HMGET' => 'Predis\Command\HashGetMultiple', + 'HDEL' => 'Predis\Command\HashDelete', + 'HEXISTS' => 'Predis\Command\HashExists', + 'HLEN' => 'Predis\Command\HashLength', + 'HKEYS' => 'Predis\Command\HashKeys', + 'HVALS' => 'Predis\Command\HashValues', + 'HGETALL' => 'Predis\Command\HashGetAll', + + /* transactions */ + 'MULTI' => 'Predis\Command\TransactionMulti', + 'EXEC' => 'Predis\Command\TransactionExec', + 'DISCARD' => 'Predis\Command\TransactionDiscard', + + /* publish - subscribe */ + 'SUBSCRIBE' => 'Predis\Command\PubSubSubscribe', + 'UNSUBSCRIBE' => 'Predis\Command\PubSubUnsubscribe', + 'PSUBSCRIBE' => 'Predis\Command\PubSubSubscribeByPattern', + 'PUNSUBSCRIBE' => 'Predis\Command\PubSubUnsubscribeByPattern', + 'PUBLISH' => 'Predis\Command\PubSubPublish', + + /* remote server control commands */ + 'CONFIG' => 'Predis\Command\ServerConfig', + + /* ---------------- Redis 2.2 ---------------- */ + + /* commands operating on the key space */ + 'PERSIST' => 'Predis\Command\KeyPersist', + + /* commands operating on string values */ + 'STRLEN' => 'Predis\Command\StringStrlen', + 'SETRANGE' => 'Predis\Command\StringSetRange', + 'GETRANGE' => 'Predis\Command\StringGetRange', + 'SETBIT' => 'Predis\Command\StringSetBit', + 'GETBIT' => 'Predis\Command\StringGetBit', + + /* commands operating on lists */ + 'RPUSHX' => 'Predis\Command\ListPushTailX', + 'LPUSHX' => 'Predis\Command\ListPushHeadX', + 'LINSERT' => 'Predis\Command\ListInsert', + 'BRPOPLPUSH' => 'Predis\Command\ListPopLastPushHeadBlocking', + + /* commands operating on sorted sets */ + 'ZREVRANGEBYSCORE' => 'Predis\Command\ZSetReverseRangeByScore', + + /* transactions */ + 'WATCH' => 'Predis\Command\TransactionWatch', + 'UNWATCH' => 'Predis\Command\TransactionUnwatch', + + /* remote server control commands */ + 'OBJECT' => 'Predis\Command\ServerObject', + 'SLOWLOG' => 'Predis\Command\ServerSlowlog', + + /* ---------------- Redis 2.4 ---------------- */ + + /* remote server control commands */ + 'CLIENT' => 'Predis\Command\ServerClient', + + /* ---------------- Redis 2.6 ---------------- */ + + /* commands operating on the key space */ + 'PTTL' => 'Predis\Command\KeyPreciseTimeToLive', + 'PEXPIRE' => 'Predis\Command\KeyPreciseExpire', + 'PEXPIREAT' => 'Predis\Command\KeyPreciseExpireAt', + 'MIGRATE' => 'Predis\Command\KeyMigrate', + + /* commands operating on string values */ + 'PSETEX' => 'Predis\Command\StringPreciseSetExpire', + 'INCRBYFLOAT' => 'Predis\Command\StringIncrementByFloat', + 'BITOP' => 'Predis\Command\StringBitOp', + 'BITCOUNT' => 'Predis\Command\StringBitCount', + + /* commands operating on hashes */ + 'HINCRBYFLOAT' => 'Predis\Command\HashIncrementByFloat', + + /* scripting */ + 'EVAL' => 'Predis\Command\ServerEval', + 'EVALSHA' => 'Predis\Command\ServerEvalSHA', + 'SCRIPT' => 'Predis\Command\ServerScript', + + /* remote server control commands */ + 'TIME' => 'Predis\Command\ServerTime', + 'SENTINEL' => 'Predis\Command\ServerSentinel', + + /* ---------------- Redis 2.8 ---------------- */ + + /* commands operating on the key space */ + 'SCAN' => 'Predis\Command\KeyScan', + + /* commands operating on string values */ + 'BITPOS' => 'Predis\Command\StringBitPos', + + /* commands operating on sets */ + 'SSCAN' => 'Predis\Command\SetScan', + + /* commands operating on sorted sets */ + 'ZSCAN' => 'Predis\Command\ZSetScan', + 'ZLEXCOUNT' => 'Predis\Command\ZSetLexCount', + 'ZRANGEBYLEX' => 'Predis\Command\ZSetRangeByLex', + 'ZREMRANGEBYLEX' => 'Predis\Command\ZSetRemoveRangeByLex', + 'ZREVRANGEBYLEX' => 'Predis\Command\ZSetReverseRangeByLex', + + /* commands operating on hashes */ + 'HSCAN' => 'Predis\Command\HashScan', + + /* publish - subscribe */ + 'PUBSUB' => 'Predis\Command\PubSubPubsub', + + /* commands operating on HyperLogLog */ + 'PFADD' => 'Predis\Command\HyperLogLogAdd', + 'PFCOUNT' => 'Predis\Command\HyperLogLogCount', + 'PFMERGE' => 'Predis\Command\HyperLogLogMerge', + + /* remote server control commands */ + 'COMMAND' => 'Predis\Command\ServerCommand', + + /* ---------------- Redis 3.0 ---------------- */ + + ); + } +} diff --git a/vendor/predis/predis/src/Profile/RedisVersion320.php b/vendor/predis/predis/src/Profile/RedisVersion320.php new file mode 100644 index 00000000..cc3dd195 --- /dev/null +++ b/vendor/predis/predis/src/Profile/RedisVersion320.php @@ -0,0 +1,281 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Profile; + +/** + * Server profile for Redis 3.0. + * + * @author Daniele Alessandri + */ +class RedisVersion320 extends RedisProfile +{ + /** + * {@inheritdoc} + */ + public function getVersion() + { + return '3.2'; + } + + /** + * {@inheritdoc} + */ + public function getSupportedCommands() + { + return array( + /* ---------------- Redis 1.2 ---------------- */ + + /* commands operating on the key space */ + 'EXISTS' => 'Predis\Command\KeyExists', + 'DEL' => 'Predis\Command\KeyDelete', + 'TYPE' => 'Predis\Command\KeyType', + 'KEYS' => 'Predis\Command\KeyKeys', + 'RANDOMKEY' => 'Predis\Command\KeyRandom', + 'RENAME' => 'Predis\Command\KeyRename', + 'RENAMENX' => 'Predis\Command\KeyRenamePreserve', + 'EXPIRE' => 'Predis\Command\KeyExpire', + 'EXPIREAT' => 'Predis\Command\KeyExpireAt', + 'TTL' => 'Predis\Command\KeyTimeToLive', + 'MOVE' => 'Predis\Command\KeyMove', + 'SORT' => 'Predis\Command\KeySort', + 'DUMP' => 'Predis\Command\KeyDump', + 'RESTORE' => 'Predis\Command\KeyRestore', + + /* commands operating on string values */ + 'SET' => 'Predis\Command\StringSet', + 'SETNX' => 'Predis\Command\StringSetPreserve', + 'MSET' => 'Predis\Command\StringSetMultiple', + 'MSETNX' => 'Predis\Command\StringSetMultiplePreserve', + 'GET' => 'Predis\Command\StringGet', + 'MGET' => 'Predis\Command\StringGetMultiple', + 'GETSET' => 'Predis\Command\StringGetSet', + 'INCR' => 'Predis\Command\StringIncrement', + 'INCRBY' => 'Predis\Command\StringIncrementBy', + 'DECR' => 'Predis\Command\StringDecrement', + 'DECRBY' => 'Predis\Command\StringDecrementBy', + + /* commands operating on lists */ + 'RPUSH' => 'Predis\Command\ListPushTail', + 'LPUSH' => 'Predis\Command\ListPushHead', + 'LLEN' => 'Predis\Command\ListLength', + 'LRANGE' => 'Predis\Command\ListRange', + 'LTRIM' => 'Predis\Command\ListTrim', + 'LINDEX' => 'Predis\Command\ListIndex', + 'LSET' => 'Predis\Command\ListSet', + 'LREM' => 'Predis\Command\ListRemove', + 'LPOP' => 'Predis\Command\ListPopFirst', + 'RPOP' => 'Predis\Command\ListPopLast', + 'RPOPLPUSH' => 'Predis\Command\ListPopLastPushHead', + + /* commands operating on sets */ + 'SADD' => 'Predis\Command\SetAdd', + 'SREM' => 'Predis\Command\SetRemove', + 'SPOP' => 'Predis\Command\SetPop', + 'SMOVE' => 'Predis\Command\SetMove', + 'SCARD' => 'Predis\Command\SetCardinality', + 'SISMEMBER' => 'Predis\Command\SetIsMember', + 'SINTER' => 'Predis\Command\SetIntersection', + 'SINTERSTORE' => 'Predis\Command\SetIntersectionStore', + 'SUNION' => 'Predis\Command\SetUnion', + 'SUNIONSTORE' => 'Predis\Command\SetUnionStore', + 'SDIFF' => 'Predis\Command\SetDifference', + 'SDIFFSTORE' => 'Predis\Command\SetDifferenceStore', + 'SMEMBERS' => 'Predis\Command\SetMembers', + 'SRANDMEMBER' => 'Predis\Command\SetRandomMember', + + /* commands operating on sorted sets */ + 'ZADD' => 'Predis\Command\ZSetAdd', + 'ZINCRBY' => 'Predis\Command\ZSetIncrementBy', + 'ZREM' => 'Predis\Command\ZSetRemove', + 'ZRANGE' => 'Predis\Command\ZSetRange', + 'ZREVRANGE' => 'Predis\Command\ZSetReverseRange', + 'ZRANGEBYSCORE' => 'Predis\Command\ZSetRangeByScore', + 'ZCARD' => 'Predis\Command\ZSetCardinality', + 'ZSCORE' => 'Predis\Command\ZSetScore', + 'ZREMRANGEBYSCORE' => 'Predis\Command\ZSetRemoveRangeByScore', + + /* connection related commands */ + 'PING' => 'Predis\Command\ConnectionPing', + 'AUTH' => 'Predis\Command\ConnectionAuth', + 'SELECT' => 'Predis\Command\ConnectionSelect', + 'ECHO' => 'Predis\Command\ConnectionEcho', + 'QUIT' => 'Predis\Command\ConnectionQuit', + + /* remote server control commands */ + 'INFO' => 'Predis\Command\ServerInfoV26x', + 'SLAVEOF' => 'Predis\Command\ServerSlaveOf', + 'MONITOR' => 'Predis\Command\ServerMonitor', + 'DBSIZE' => 'Predis\Command\ServerDatabaseSize', + 'FLUSHDB' => 'Predis\Command\ServerFlushDatabase', + 'FLUSHALL' => 'Predis\Command\ServerFlushAll', + 'SAVE' => 'Predis\Command\ServerSave', + 'BGSAVE' => 'Predis\Command\ServerBackgroundSave', + 'LASTSAVE' => 'Predis\Command\ServerLastSave', + 'SHUTDOWN' => 'Predis\Command\ServerShutdown', + 'BGREWRITEAOF' => 'Predis\Command\ServerBackgroundRewriteAOF', + + /* ---------------- Redis 2.0 ---------------- */ + + /* commands operating on string values */ + 'SETEX' => 'Predis\Command\StringSetExpire', + 'APPEND' => 'Predis\Command\StringAppend', + 'SUBSTR' => 'Predis\Command\StringSubstr', + + /* commands operating on lists */ + 'BLPOP' => 'Predis\Command\ListPopFirstBlocking', + 'BRPOP' => 'Predis\Command\ListPopLastBlocking', + + /* commands operating on sorted sets */ + 'ZUNIONSTORE' => 'Predis\Command\ZSetUnionStore', + 'ZINTERSTORE' => 'Predis\Command\ZSetIntersectionStore', + 'ZCOUNT' => 'Predis\Command\ZSetCount', + 'ZRANK' => 'Predis\Command\ZSetRank', + 'ZREVRANK' => 'Predis\Command\ZSetReverseRank', + 'ZREMRANGEBYRANK' => 'Predis\Command\ZSetRemoveRangeByRank', + + /* commands operating on hashes */ + 'HSET' => 'Predis\Command\HashSet', + 'HSETNX' => 'Predis\Command\HashSetPreserve', + 'HMSET' => 'Predis\Command\HashSetMultiple', + 'HINCRBY' => 'Predis\Command\HashIncrementBy', + 'HGET' => 'Predis\Command\HashGet', + 'HMGET' => 'Predis\Command\HashGetMultiple', + 'HDEL' => 'Predis\Command\HashDelete', + 'HEXISTS' => 'Predis\Command\HashExists', + 'HLEN' => 'Predis\Command\HashLength', + 'HKEYS' => 'Predis\Command\HashKeys', + 'HVALS' => 'Predis\Command\HashValues', + 'HGETALL' => 'Predis\Command\HashGetAll', + + /* transactions */ + 'MULTI' => 'Predis\Command\TransactionMulti', + 'EXEC' => 'Predis\Command\TransactionExec', + 'DISCARD' => 'Predis\Command\TransactionDiscard', + + /* publish - subscribe */ + 'SUBSCRIBE' => 'Predis\Command\PubSubSubscribe', + 'UNSUBSCRIBE' => 'Predis\Command\PubSubUnsubscribe', + 'PSUBSCRIBE' => 'Predis\Command\PubSubSubscribeByPattern', + 'PUNSUBSCRIBE' => 'Predis\Command\PubSubUnsubscribeByPattern', + 'PUBLISH' => 'Predis\Command\PubSubPublish', + + /* remote server control commands */ + 'CONFIG' => 'Predis\Command\ServerConfig', + + /* ---------------- Redis 2.2 ---------------- */ + + /* commands operating on the key space */ + 'PERSIST' => 'Predis\Command\KeyPersist', + + /* commands operating on string values */ + 'STRLEN' => 'Predis\Command\StringStrlen', + 'SETRANGE' => 'Predis\Command\StringSetRange', + 'GETRANGE' => 'Predis\Command\StringGetRange', + 'SETBIT' => 'Predis\Command\StringSetBit', + 'GETBIT' => 'Predis\Command\StringGetBit', + + /* commands operating on lists */ + 'RPUSHX' => 'Predis\Command\ListPushTailX', + 'LPUSHX' => 'Predis\Command\ListPushHeadX', + 'LINSERT' => 'Predis\Command\ListInsert', + 'BRPOPLPUSH' => 'Predis\Command\ListPopLastPushHeadBlocking', + + /* commands operating on sorted sets */ + 'ZREVRANGEBYSCORE' => 'Predis\Command\ZSetReverseRangeByScore', + + /* transactions */ + 'WATCH' => 'Predis\Command\TransactionWatch', + 'UNWATCH' => 'Predis\Command\TransactionUnwatch', + + /* remote server control commands */ + 'OBJECT' => 'Predis\Command\ServerObject', + 'SLOWLOG' => 'Predis\Command\ServerSlowlog', + + /* ---------------- Redis 2.4 ---------------- */ + + /* remote server control commands */ + 'CLIENT' => 'Predis\Command\ServerClient', + + /* ---------------- Redis 2.6 ---------------- */ + + /* commands operating on the key space */ + 'PTTL' => 'Predis\Command\KeyPreciseTimeToLive', + 'PEXPIRE' => 'Predis\Command\KeyPreciseExpire', + 'PEXPIREAT' => 'Predis\Command\KeyPreciseExpireAt', + 'MIGRATE' => 'Predis\Command\KeyMigrate', + + /* commands operating on string values */ + 'PSETEX' => 'Predis\Command\StringPreciseSetExpire', + 'INCRBYFLOAT' => 'Predis\Command\StringIncrementByFloat', + 'BITOP' => 'Predis\Command\StringBitOp', + 'BITCOUNT' => 'Predis\Command\StringBitCount', + + /* commands operating on hashes */ + 'HINCRBYFLOAT' => 'Predis\Command\HashIncrementByFloat', + + /* scripting */ + 'EVAL' => 'Predis\Command\ServerEval', + 'EVALSHA' => 'Predis\Command\ServerEvalSHA', + 'SCRIPT' => 'Predis\Command\ServerScript', + + /* remote server control commands */ + 'TIME' => 'Predis\Command\ServerTime', + 'SENTINEL' => 'Predis\Command\ServerSentinel', + + /* ---------------- Redis 2.8 ---------------- */ + + /* commands operating on the key space */ + 'SCAN' => 'Predis\Command\KeyScan', + + /* commands operating on string values */ + 'BITPOS' => 'Predis\Command\StringBitPos', + + /* commands operating on sets */ + 'SSCAN' => 'Predis\Command\SetScan', + + /* commands operating on sorted sets */ + 'ZSCAN' => 'Predis\Command\ZSetScan', + 'ZLEXCOUNT' => 'Predis\Command\ZSetLexCount', + 'ZRANGEBYLEX' => 'Predis\Command\ZSetRangeByLex', + 'ZREMRANGEBYLEX' => 'Predis\Command\ZSetRemoveRangeByLex', + 'ZREVRANGEBYLEX' => 'Predis\Command\ZSetReverseRangeByLex', + + /* commands operating on hashes */ + 'HSCAN' => 'Predis\Command\HashScan', + + /* publish - subscribe */ + 'PUBSUB' => 'Predis\Command\PubSubPubsub', + + /* commands operating on HyperLogLog */ + 'PFADD' => 'Predis\Command\HyperLogLogAdd', + 'PFCOUNT' => 'Predis\Command\HyperLogLogCount', + 'PFMERGE' => 'Predis\Command\HyperLogLogMerge', + + /* remote server control commands */ + 'COMMAND' => 'Predis\Command\ServerCommand', + + /* ---------------- Redis 3.2 ---------------- */ + + /* commands operating on hashes */ + 'HSTRLEN' => 'Predis\Command\HashStringLength', + 'BITFIELD' => 'Predis\Command\StringBitField', + + /* commands performing geospatial operations */ + 'GEOADD' => 'Predis\Command\GeospatialGeoAdd', + 'GEOHASH' => 'Predis\Command\GeospatialGeoHash', + 'GEOPOS' => 'Predis\Command\GeospatialGeoPos', + 'GEODIST' => 'Predis\Command\GeospatialGeoDist', + 'GEORADIUS' => 'Predis\Command\GeospatialGeoRadius', + 'GEORADIUSBYMEMBER' => 'Predis\Command\GeospatialGeoRadiusByMember', + ); + } +} diff --git a/vendor/predis/predis/src/Protocol/ProtocolException.php b/vendor/predis/predis/src/Protocol/ProtocolException.php new file mode 100644 index 00000000..321a9ca6 --- /dev/null +++ b/vendor/predis/predis/src/Protocol/ProtocolException.php @@ -0,0 +1,24 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Protocol; + +use Predis\CommunicationException; + +/** + * Exception used to indentify errors encountered while parsing the Redis wire + * protocol. + * + * @author Daniele Alessandri + */ +class ProtocolException extends CommunicationException +{ +} diff --git a/vendor/predis/predis/src/Protocol/ProtocolProcessorInterface.php b/vendor/predis/predis/src/Protocol/ProtocolProcessorInterface.php new file mode 100644 index 00000000..ec3d9b55 --- /dev/null +++ b/vendor/predis/predis/src/Protocol/ProtocolProcessorInterface.php @@ -0,0 +1,41 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Protocol; + +use Predis\Command\CommandInterface; +use Predis\Connection\CompositeConnectionInterface; + +/** + * Defines a pluggable protocol processor capable of serializing commands and + * deserializing responses into PHP objects directly from a connection. + * + * @author Daniele Alessandri + */ +interface ProtocolProcessorInterface +{ + /** + * Writes a request over a connection to Redis. + * + * @param CompositeConnectionInterface $connection Redis connection. + * @param CommandInterface $command Command instance. + */ + public function write(CompositeConnectionInterface $connection, CommandInterface $command); + + /** + * Reads a response from a connection to Redis. + * + * @param CompositeConnectionInterface $connection Redis connection. + * + * @return mixed + */ + public function read(CompositeConnectionInterface $connection); +} diff --git a/vendor/predis/predis/src/Protocol/RequestSerializerInterface.php b/vendor/predis/predis/src/Protocol/RequestSerializerInterface.php new file mode 100644 index 00000000..40564683 --- /dev/null +++ b/vendor/predis/predis/src/Protocol/RequestSerializerInterface.php @@ -0,0 +1,31 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Protocol; + +use Predis\Command\CommandInterface; + +/** + * Defines a pluggable serializer for Redis commands. + * + * @author Daniele Alessandri + */ +interface RequestSerializerInterface +{ + /** + * Serializes a Redis command. + * + * @param CommandInterface $command Redis command. + * + * @return string + */ + public function serialize(CommandInterface $command); +} diff --git a/vendor/predis/predis/src/Protocol/ResponseReaderInterface.php b/vendor/predis/predis/src/Protocol/ResponseReaderInterface.php new file mode 100644 index 00000000..604615d2 --- /dev/null +++ b/vendor/predis/predis/src/Protocol/ResponseReaderInterface.php @@ -0,0 +1,32 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Protocol; + +use Predis\Connection\CompositeConnectionInterface; + +/** + * Defines a pluggable reader capable of parsing responses returned by Redis and + * deserializing them to PHP objects. + * + * @author Daniele Alessandri + */ +interface ResponseReaderInterface +{ + /** + * Reads a response from a connection to Redis. + * + * @param CompositeConnectionInterface $connection Redis connection. + * + * @return mixed + */ + public function read(CompositeConnectionInterface $connection); +} diff --git a/vendor/predis/predis/src/Protocol/Text/CompositeProtocolProcessor.php b/vendor/predis/predis/src/Protocol/Text/CompositeProtocolProcessor.php new file mode 100644 index 00000000..7adcf2da --- /dev/null +++ b/vendor/predis/predis/src/Protocol/Text/CompositeProtocolProcessor.php @@ -0,0 +1,107 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Protocol\Text; + +use Predis\Command\CommandInterface; +use Predis\Connection\CompositeConnectionInterface; +use Predis\Protocol\ProtocolProcessorInterface; +use Predis\Protocol\RequestSerializerInterface; +use Predis\Protocol\ResponseReaderInterface; + +/** + * Composite protocol processor for the standard Redis wire protocol using + * pluggable handlers to serialize requests and deserialize responses. + * + * @link http://redis.io/topics/protocol + * + * @author Daniele Alessandri + */ +class CompositeProtocolProcessor implements ProtocolProcessorInterface +{ + /* + * @var RequestSerializerInterface + */ + protected $serializer; + + /* + * @var ResponseReaderInterface + */ + protected $reader; + + /** + * @param RequestSerializerInterface $serializer Request serializer. + * @param ResponseReaderInterface $reader Response reader. + */ + public function __construct( + RequestSerializerInterface $serializer = null, + ResponseReaderInterface $reader = null + ) { + $this->setRequestSerializer($serializer ?: new RequestSerializer()); + $this->setResponseReader($reader ?: new ResponseReader()); + } + + /** + * {@inheritdoc} + */ + public function write(CompositeConnectionInterface $connection, CommandInterface $command) + { + $connection->writeBuffer($this->serializer->serialize($command)); + } + + /** + * {@inheritdoc} + */ + public function read(CompositeConnectionInterface $connection) + { + return $this->reader->read($connection); + } + + /** + * Sets the request serializer used by the protocol processor. + * + * @param RequestSerializerInterface $serializer Request serializer. + */ + public function setRequestSerializer(RequestSerializerInterface $serializer) + { + $this->serializer = $serializer; + } + + /** + * Returns the request serializer used by the protocol processor. + * + * @return RequestSerializerInterface + */ + public function getRequestSerializer() + { + return $this->serializer; + } + + /** + * Sets the response reader used by the protocol processor. + * + * @param ResponseReaderInterface $reader Response reader. + */ + public function setResponseReader(ResponseReaderInterface $reader) + { + $this->reader = $reader; + } + + /** + * Returns the Response reader used by the protocol processor. + * + * @return ResponseReaderInterface + */ + public function getResponseReader() + { + return $this->reader; + } +} diff --git a/vendor/predis/predis/src/Protocol/Text/Handler/BulkResponse.php b/vendor/predis/predis/src/Protocol/Text/Handler/BulkResponse.php new file mode 100644 index 00000000..0d171acf --- /dev/null +++ b/vendor/predis/predis/src/Protocol/Text/Handler/BulkResponse.php @@ -0,0 +1,55 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Protocol\Text\Handler; + +use Predis\CommunicationException; +use Predis\Connection\CompositeConnectionInterface; +use Predis\Protocol\ProtocolException; + +/** + * Handler for the bulk response type in the standard Redis wire protocol. + * It translates the payload to a string or a NULL. + * + * @link http://redis.io/topics/protocol + * + * @author Daniele Alessandri + */ +class BulkResponse implements ResponseHandlerInterface +{ + /** + * {@inheritdoc} + */ + public function handle(CompositeConnectionInterface $connection, $payload) + { + $length = (int) $payload; + + if ("$length" !== $payload) { + CommunicationException::handle(new ProtocolException( + $connection, "Cannot parse '$payload' as a valid length for a bulk response." + )); + } + + if ($length >= 0) { + return substr($connection->readBuffer($length + 2), 0, -2); + } + + if ($length == -1) { + return; + } + + CommunicationException::handle(new ProtocolException( + $connection, "Value '$payload' is not a valid length for a bulk response." + )); + + return; + } +} diff --git a/vendor/predis/predis/src/Protocol/Text/Handler/ErrorResponse.php b/vendor/predis/predis/src/Protocol/Text/Handler/ErrorResponse.php new file mode 100644 index 00000000..d350189b --- /dev/null +++ b/vendor/predis/predis/src/Protocol/Text/Handler/ErrorResponse.php @@ -0,0 +1,34 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Protocol\Text\Handler; + +use Predis\Connection\CompositeConnectionInterface; +use Predis\Response\Error; + +/** + * Handler for the error response type in the standard Redis wire protocol. + * It translates the payload to a complex response object for Predis. + * + * @link http://redis.io/topics/protocol + * + * @author Daniele Alessandri + */ +class ErrorResponse implements ResponseHandlerInterface +{ + /** + * {@inheritdoc} + */ + public function handle(CompositeConnectionInterface $connection, $payload) + { + return new Error($payload); + } +} diff --git a/vendor/predis/predis/src/Protocol/Text/Handler/IntegerResponse.php b/vendor/predis/predis/src/Protocol/Text/Handler/IntegerResponse.php new file mode 100644 index 00000000..d653b95d --- /dev/null +++ b/vendor/predis/predis/src/Protocol/Text/Handler/IntegerResponse.php @@ -0,0 +1,46 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Protocol\Text\Handler; + +use Predis\CommunicationException; +use Predis\Connection\CompositeConnectionInterface; +use Predis\Protocol\ProtocolException; + +/** + * Handler for the integer response type in the standard Redis wire protocol. + * It translates the payload an integer or NULL. + * + * @link http://redis.io/topics/protocol + * + * @author Daniele Alessandri + */ +class IntegerResponse implements ResponseHandlerInterface +{ + /** + * {@inheritdoc} + */ + public function handle(CompositeConnectionInterface $connection, $payload) + { + if (is_numeric($payload)) { + $integer = (int) $payload; + return $integer == $payload ? $integer : $payload; + } + + if ($payload !== 'nil') { + CommunicationException::handle(new ProtocolException( + $connection, "Cannot parse '$payload' as a valid numeric response." + )); + } + + return; + } +} diff --git a/vendor/predis/predis/src/Protocol/Text/Handler/MultiBulkResponse.php b/vendor/predis/predis/src/Protocol/Text/Handler/MultiBulkResponse.php new file mode 100644 index 00000000..8c7cc956 --- /dev/null +++ b/vendor/predis/predis/src/Protocol/Text/Handler/MultiBulkResponse.php @@ -0,0 +1,68 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Protocol\Text\Handler; + +use Predis\CommunicationException; +use Predis\Connection\CompositeConnectionInterface; +use Predis\Protocol\ProtocolException; + +/** + * Handler for the multibulk response type in the standard Redis wire protocol. + * It returns multibulk responses as PHP arrays. + * + * @link http://redis.io/topics/protocol + * + * @author Daniele Alessandri + */ +class MultiBulkResponse implements ResponseHandlerInterface +{ + /** + * {@inheritdoc} + */ + public function handle(CompositeConnectionInterface $connection, $payload) + { + $length = (int) $payload; + + if ("$length" !== $payload) { + CommunicationException::handle(new ProtocolException( + $connection, "Cannot parse '$payload' as a valid length of a multi-bulk response." + )); + } + + if ($length === -1) { + return; + } + + $list = array(); + + if ($length > 0) { + $handlersCache = array(); + $reader = $connection->getProtocol()->getResponseReader(); + + for ($i = 0; $i < $length; ++$i) { + $header = $connection->readLine(); + $prefix = $header[0]; + + if (isset($handlersCache[$prefix])) { + $handler = $handlersCache[$prefix]; + } else { + $handler = $reader->getHandler($prefix); + $handlersCache[$prefix] = $handler; + } + + $list[$i] = $handler->handle($connection, substr($header, 1)); + } + } + + return $list; + } +} diff --git a/vendor/predis/predis/src/Protocol/Text/Handler/ResponseHandlerInterface.php b/vendor/predis/predis/src/Protocol/Text/Handler/ResponseHandlerInterface.php new file mode 100644 index 00000000..4a2474f9 --- /dev/null +++ b/vendor/predis/predis/src/Protocol/Text/Handler/ResponseHandlerInterface.php @@ -0,0 +1,33 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Protocol\Text\Handler; + +use Predis\Connection\CompositeConnectionInterface; + +/** + * Defines a pluggable handler used to parse a particular type of response. + * + * @author Daniele Alessandri + */ +interface ResponseHandlerInterface +{ + /** + * Deserializes a response returned by Redis and reads more data from the + * connection if needed. + * + * @param CompositeConnectionInterface $connection Redis connection. + * @param string $payload String payload. + * + * @return mixed + */ + public function handle(CompositeConnectionInterface $connection, $payload); +} diff --git a/vendor/predis/predis/src/Protocol/Text/Handler/StatusResponse.php b/vendor/predis/predis/src/Protocol/Text/Handler/StatusResponse.php new file mode 100644 index 00000000..9adbdcca --- /dev/null +++ b/vendor/predis/predis/src/Protocol/Text/Handler/StatusResponse.php @@ -0,0 +1,35 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Protocol\Text\Handler; + +use Predis\Connection\CompositeConnectionInterface; +use Predis\Response\Status; + +/** + * Handler for the status response type in the standard Redis wire protocol. It + * translates certain classes of status response to PHP objects or just returns + * the payload as a string. + * + * @link http://redis.io/topics/protocol + * + * @author Daniele Alessandri + */ +class StatusResponse implements ResponseHandlerInterface +{ + /** + * {@inheritdoc} + */ + public function handle(CompositeConnectionInterface $connection, $payload) + { + return Status::get($payload); + } +} diff --git a/vendor/predis/predis/src/Protocol/Text/Handler/StreamableMultiBulkResponse.php b/vendor/predis/predis/src/Protocol/Text/Handler/StreamableMultiBulkResponse.php new file mode 100644 index 00000000..d7854632 --- /dev/null +++ b/vendor/predis/predis/src/Protocol/Text/Handler/StreamableMultiBulkResponse.php @@ -0,0 +1,47 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Protocol\Text\Handler; + +use Predis\CommunicationException; +use Predis\Connection\CompositeConnectionInterface; +use Predis\Protocol\ProtocolException; +use Predis\Response\Iterator\MultiBulk as MultiBulkIterator; + +/** + * Handler for the multibulk response type in the standard Redis wire protocol. + * It returns multibulk responses as iterators that can stream bulk elements. + * + * Streamable multibulk responses are not globally supported by the abstractions + * built-in into Predis, such as transactions or pipelines. Use them with care! + * + * @link http://redis.io/topics/protocol + * + * @author Daniele Alessandri + */ +class StreamableMultiBulkResponse implements ResponseHandlerInterface +{ + /** + * {@inheritdoc} + */ + public function handle(CompositeConnectionInterface $connection, $payload) + { + $length = (int) $payload; + + if ("$length" != $payload) { + CommunicationException::handle(new ProtocolException( + $connection, "Cannot parse '$payload' as a valid length for a multi-bulk response." + )); + } + + return new MultiBulkIterator($connection, $length); + } +} diff --git a/vendor/predis/predis/src/Protocol/Text/ProtocolProcessor.php b/vendor/predis/predis/src/Protocol/Text/ProtocolProcessor.php new file mode 100644 index 00000000..10a3f225 --- /dev/null +++ b/vendor/predis/predis/src/Protocol/Text/ProtocolProcessor.php @@ -0,0 +1,123 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Protocol\Text; + +use Predis\Command\CommandInterface; +use Predis\CommunicationException; +use Predis\Connection\CompositeConnectionInterface; +use Predis\Protocol\ProtocolException; +use Predis\Protocol\ProtocolProcessorInterface; +use Predis\Response\Error as ErrorResponse; +use Predis\Response\Iterator\MultiBulk as MultiBulkIterator; +use Predis\Response\Status as StatusResponse; + +/** + * Protocol processor for the standard Redis wire protocol. + * + * @link http://redis.io/topics/protocol + * + * @author Daniele Alessandri + */ +class ProtocolProcessor implements ProtocolProcessorInterface +{ + protected $mbiterable; + protected $serializer; + + /** + * + */ + public function __construct() + { + $this->mbiterable = false; + $this->serializer = new RequestSerializer(); + } + + /** + * {@inheritdoc} + */ + public function write(CompositeConnectionInterface $connection, CommandInterface $command) + { + $request = $this->serializer->serialize($command); + $connection->writeBuffer($request); + } + + /** + * {@inheritdoc} + */ + public function read(CompositeConnectionInterface $connection) + { + $chunk = $connection->readLine(); + $prefix = $chunk[0]; + $payload = substr($chunk, 1); + + switch ($prefix) { + case '+': + return new StatusResponse($payload); + + case '$': + $size = (int) $payload; + if ($size === -1) { + return; + } + + return substr($connection->readBuffer($size + 2), 0, -2); + + case '*': + $count = (int) $payload; + + if ($count === -1) { + return; + } + if ($this->mbiterable) { + return new MultiBulkIterator($connection, $count); + } + + $multibulk = array(); + + for ($i = 0; $i < $count; ++$i) { + $multibulk[$i] = $this->read($connection); + } + + return $multibulk; + + case ':': + $integer = (int) $payload; + return $integer == $payload ? $integer : $payload; + + case '-': + return new ErrorResponse($payload); + + default: + CommunicationException::handle(new ProtocolException( + $connection, "Unknown response prefix: '$prefix'." + )); + + return; + } + } + + /** + * Enables or disables returning multibulk responses as specialized PHP + * iterators used to stream bulk elements of a multibulk response instead + * returning a plain array. + * + * Streamable multibulk responses are not globally supported by the + * abstractions built-in into Predis, such as transactions or pipelines. + * Use them with care! + * + * @param bool $value Enable or disable streamable multibulk responses. + */ + public function useIterableMultibulk($value) + { + $this->mbiterable = (bool) $value; + } +} diff --git a/vendor/predis/predis/src/Protocol/Text/RequestSerializer.php b/vendor/predis/predis/src/Protocol/Text/RequestSerializer.php new file mode 100644 index 00000000..671e92da --- /dev/null +++ b/vendor/predis/predis/src/Protocol/Text/RequestSerializer.php @@ -0,0 +1,46 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Protocol\Text; + +use Predis\Command\CommandInterface; +use Predis\Protocol\RequestSerializerInterface; + +/** + * Request serializer for the standard Redis wire protocol. + * + * @link http://redis.io/topics/protocol + * + * @author Daniele Alessandri + */ +class RequestSerializer implements RequestSerializerInterface +{ + /** + * {@inheritdoc} + */ + public function serialize(CommandInterface $command) + { + $commandID = $command->getId(); + $arguments = $command->getArguments(); + + $cmdlen = strlen($commandID); + $reqlen = count($arguments) + 1; + + $buffer = "*{$reqlen}\r\n\${$cmdlen}\r\n{$commandID}\r\n"; + + foreach ($arguments as $argument) { + $arglen = strlen($argument); + $buffer .= "\${$arglen}\r\n{$argument}\r\n"; + } + + return $buffer; + } +} diff --git a/vendor/predis/predis/src/Protocol/Text/ResponseReader.php b/vendor/predis/predis/src/Protocol/Text/ResponseReader.php new file mode 100644 index 00000000..b230a9b1 --- /dev/null +++ b/vendor/predis/predis/src/Protocol/Text/ResponseReader.php @@ -0,0 +1,116 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Protocol\Text; + +use Predis\CommunicationException; +use Predis\Connection\CompositeConnectionInterface; +use Predis\Protocol\ProtocolException; +use Predis\Protocol\ResponseReaderInterface; + +/** + * Response reader for the standard Redis wire protocol. + * + * @link http://redis.io/topics/protocol + * + * @author Daniele Alessandri + */ +class ResponseReader implements ResponseReaderInterface +{ + protected $handlers; + + /** + * + */ + public function __construct() + { + $this->handlers = $this->getDefaultHandlers(); + } + + /** + * Returns the default handlers for the supported type of responses. + * + * @return array + */ + protected function getDefaultHandlers() + { + return array( + '+' => new Handler\StatusResponse(), + '-' => new Handler\ErrorResponse(), + ':' => new Handler\IntegerResponse(), + '$' => new Handler\BulkResponse(), + '*' => new Handler\MultiBulkResponse(), + ); + } + + /** + * Sets the handler for the specified prefix identifying the response type. + * + * @param string $prefix Identifier of the type of response. + * @param Handler\ResponseHandlerInterface $handler Response handler. + */ + public function setHandler($prefix, Handler\ResponseHandlerInterface $handler) + { + $this->handlers[$prefix] = $handler; + } + + /** + * Returns the response handler associated to a certain type of response. + * + * @param string $prefix Identifier of the type of response. + * + * @return Handler\ResponseHandlerInterface + */ + public function getHandler($prefix) + { + if (isset($this->handlers[$prefix])) { + return $this->handlers[$prefix]; + } + + return; + } + + /** + * {@inheritdoc} + */ + public function read(CompositeConnectionInterface $connection) + { + $header = $connection->readLine(); + + if ($header === '') { + $this->onProtocolError($connection, 'Unexpected empty reponse header.'); + } + + $prefix = $header[0]; + + if (!isset($this->handlers[$prefix])) { + $this->onProtocolError($connection, "Unknown response prefix: '$prefix'."); + } + + $payload = $this->handlers[$prefix]->handle($connection, substr($header, 1)); + + return $payload; + } + + /** + * Handles protocol errors generated while reading responses from a + * connection. + * + * @param CompositeConnectionInterface $connection Redis connection that generated the error. + * @param string $message Error message. + */ + protected function onProtocolError(CompositeConnectionInterface $connection, $message) + { + CommunicationException::handle( + new ProtocolException($connection, $message) + ); + } +} diff --git a/vendor/predis/predis/src/PubSub/AbstractConsumer.php b/vendor/predis/predis/src/PubSub/AbstractConsumer.php new file mode 100644 index 00000000..b146d634 --- /dev/null +++ b/vendor/predis/predis/src/PubSub/AbstractConsumer.php @@ -0,0 +1,219 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\PubSub; + +/** + * Base implementation of a PUB/SUB consumer abstraction based on PHP iterators. + * + * @author Daniele Alessandri + */ +abstract class AbstractConsumer implements \Iterator +{ + const SUBSCRIBE = 'subscribe'; + const UNSUBSCRIBE = 'unsubscribe'; + const PSUBSCRIBE = 'psubscribe'; + const PUNSUBSCRIBE = 'punsubscribe'; + const MESSAGE = 'message'; + const PMESSAGE = 'pmessage'; + const PONG = 'pong'; + + const STATUS_VALID = 1; // 0b0001 + const STATUS_SUBSCRIBED = 2; // 0b0010 + const STATUS_PSUBSCRIBED = 4; // 0b0100 + + private $position = null; + private $statusFlags = self::STATUS_VALID; + + /** + * Automatically stops the consumer when the garbage collector kicks in. + */ + public function __destruct() + { + $this->stop(true); + } + + /** + * Checks if the specified flag is valid based on the state of the consumer. + * + * @param int $value Flag. + * + * @return bool + */ + protected function isFlagSet($value) + { + return ($this->statusFlags & $value) === $value; + } + + /** + * Subscribes to the specified channels. + * + * @param mixed $channel,... One or more channel names. + */ + public function subscribe($channel /*, ... */) + { + $this->writeRequest(self::SUBSCRIBE, func_get_args()); + $this->statusFlags |= self::STATUS_SUBSCRIBED; + } + + /** + * Unsubscribes from the specified channels. + * + * @param string ... One or more channel names. + */ + public function unsubscribe(/* ... */) + { + $this->writeRequest(self::UNSUBSCRIBE, func_get_args()); + } + + /** + * Subscribes to the specified channels using a pattern. + * + * @param mixed $pattern,... One or more channel name patterns. + */ + public function psubscribe($pattern /* ... */) + { + $this->writeRequest(self::PSUBSCRIBE, func_get_args()); + $this->statusFlags |= self::STATUS_PSUBSCRIBED; + } + + /** + * Unsubscribes from the specified channels using a pattern. + * + * @param string ... One or more channel name patterns. + */ + public function punsubscribe(/* ... */) + { + $this->writeRequest(self::PUNSUBSCRIBE, func_get_args()); + } + + /** + * PING the server with an optional payload that will be echoed as a + * PONG message in the pub/sub loop. + * + * @param string $payload Optional PING payload. + */ + public function ping($payload = null) + { + $this->writeRequest('PING', array($payload)); + } + + /** + * Closes the context by unsubscribing from all the subscribed channels. The + * context can be forcefully closed by dropping the underlying connection. + * + * @param bool $drop Indicates if the context should be closed by dropping the connection. + * + * @return bool Returns false when there are no pending messages. + */ + public function stop($drop = false) + { + if (!$this->valid()) { + return false; + } + + if ($drop) { + $this->invalidate(); + $this->disconnect(); + } else { + if ($this->isFlagSet(self::STATUS_SUBSCRIBED)) { + $this->unsubscribe(); + } + if ($this->isFlagSet(self::STATUS_PSUBSCRIBED)) { + $this->punsubscribe(); + } + } + + return !$drop; + } + + /** + * Closes the underlying connection when forcing a disconnection. + */ + abstract protected function disconnect(); + + /** + * Writes a Redis command on the underlying connection. + * + * @param string $method Command ID. + * @param array $arguments Arguments for the command. + */ + abstract protected function writeRequest($method, $arguments); + + /** + * {@inheritdoc} + */ + public function rewind() + { + // NOOP + } + + /** + * Returns the last message payload retrieved from the server and generated + * by one of the active subscriptions. + * + * @return array + */ + public function current() + { + return $this->getValue(); + } + + /** + * {@inheritdoc} + */ + public function key() + { + return $this->position; + } + + /** + * {@inheritdoc} + */ + public function next() + { + if ($this->valid()) { + ++$this->position; + } + + return $this->position; + } + + /** + * Checks if the the consumer is still in a valid state to continue. + * + * @return bool + */ + public function valid() + { + $isValid = $this->isFlagSet(self::STATUS_VALID); + $subscriptionFlags = self::STATUS_SUBSCRIBED | self::STATUS_PSUBSCRIBED; + $hasSubscriptions = ($this->statusFlags & $subscriptionFlags) > 0; + + return $isValid && $hasSubscriptions; + } + + /** + * Resets the state of the consumer. + */ + protected function invalidate() + { + $this->statusFlags = 0; // 0b0000; + } + + /** + * Waits for a new message from the server generated by one of the active + * subscriptions and returns it when available. + * + * @return array + */ + abstract protected function getValue(); +} diff --git a/vendor/predis/predis/src/PubSub/Consumer.php b/vendor/predis/predis/src/PubSub/Consumer.php new file mode 100644 index 00000000..ecdb4ece --- /dev/null +++ b/vendor/predis/predis/src/PubSub/Consumer.php @@ -0,0 +1,158 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\PubSub; + +use Predis\ClientException; +use Predis\ClientInterface; +use Predis\Command\Command; +use Predis\Connection\AggregateConnectionInterface; +use Predis\NotSupportedException; + +/** + * PUB/SUB consumer abstraction. + * + * @author Daniele Alessandri + */ +class Consumer extends AbstractConsumer +{ + private $client; + private $options; + + /** + * @param ClientInterface $client Client instance used by the consumer. + * @param array $options Options for the consumer initialization. + */ + public function __construct(ClientInterface $client, array $options = null) + { + $this->checkCapabilities($client); + + $this->options = $options ?: array(); + $this->client = $client; + + $this->genericSubscribeInit('subscribe'); + $this->genericSubscribeInit('psubscribe'); + } + + /** + * Returns the underlying client instance used by the pub/sub iterator. + * + * @return ClientInterface + */ + public function getClient() + { + return $this->client; + } + + /** + * Checks if the client instance satisfies the required conditions needed to + * initialize a PUB/SUB consumer. + * + * @param ClientInterface $client Client instance used by the consumer. + * + * @throws NotSupportedException + */ + private function checkCapabilities(ClientInterface $client) + { + if ($client->getConnection() instanceof AggregateConnectionInterface) { + throw new NotSupportedException( + 'Cannot initialize a PUB/SUB consumer over aggregate connections.' + ); + } + + $commands = array('publish', 'subscribe', 'unsubscribe', 'psubscribe', 'punsubscribe'); + + if ($client->getProfile()->supportsCommands($commands) === false) { + throw new NotSupportedException( + 'The current profile does not support PUB/SUB related commands.' + ); + } + } + + /** + * This method shares the logic to handle both SUBSCRIBE and PSUBSCRIBE. + * + * @param string $subscribeAction Type of subscription. + */ + private function genericSubscribeInit($subscribeAction) + { + if (isset($this->options[$subscribeAction])) { + $this->$subscribeAction($this->options[$subscribeAction]); + } + } + + /** + * {@inheritdoc} + */ + protected function writeRequest($method, $arguments) + { + $this->client->getConnection()->writeRequest( + $this->client->createCommand($method, + Command::normalizeArguments($arguments) + ) + ); + } + + /** + * {@inheritdoc} + */ + protected function disconnect() + { + $this->client->disconnect(); + } + + /** + * {@inheritdoc} + */ + protected function getValue() + { + $response = $this->client->getConnection()->read(); + + switch ($response[0]) { + case self::SUBSCRIBE: + case self::UNSUBSCRIBE: + case self::PSUBSCRIBE: + case self::PUNSUBSCRIBE: + if ($response[2] === 0) { + $this->invalidate(); + } + // The missing break here is intentional as we must process + // subscriptions and unsubscriptions as standard messages. + // no break + + case self::MESSAGE: + return (object) array( + 'kind' => $response[0], + 'channel' => $response[1], + 'payload' => $response[2], + ); + + case self::PMESSAGE: + return (object) array( + 'kind' => $response[0], + 'pattern' => $response[1], + 'channel' => $response[2], + 'payload' => $response[3], + ); + + case self::PONG: + return (object) array( + 'kind' => $response[0], + 'payload' => $response[1], + ); + + default: + throw new ClientException( + "Unknown message type '{$response[0]}' received in the PUB/SUB context." + ); + } + } +} diff --git a/vendor/predis/predis/src/PubSub/DispatcherLoop.php b/vendor/predis/predis/src/PubSub/DispatcherLoop.php new file mode 100644 index 00000000..6c555301 --- /dev/null +++ b/vendor/predis/predis/src/PubSub/DispatcherLoop.php @@ -0,0 +1,170 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\PubSub; + +/** + * Method-dispatcher loop built around the client-side abstraction of a Redis + * PUB / SUB context. + * + * @author Daniele Alessandri + */ +class DispatcherLoop +{ + private $pubsub; + + protected $callbacks; + protected $defaultCallback; + protected $subscriptionCallback; + + /** + * @param Consumer $pubsub PubSub consumer instance used by the loop. + */ + public function __construct(Consumer $pubsub) + { + $this->callbacks = array(); + $this->pubsub = $pubsub; + } + + /** + * Checks if the passed argument is a valid callback. + * + * @param mixed $callable A callback. + * + * @throws \InvalidArgumentException + */ + protected function assertCallback($callable) + { + if (!is_callable($callable)) { + throw new \InvalidArgumentException('The given argument must be a callable object.'); + } + } + + /** + * Returns the underlying PUB / SUB context. + * + * @return Consumer + */ + public function getPubSubConsumer() + { + return $this->pubsub; + } + + /** + * Sets a callback that gets invoked upon new subscriptions. + * + * @param mixed $callable A callback. + */ + public function subscriptionCallback($callable = null) + { + if (isset($callable)) { + $this->assertCallback($callable); + } + + $this->subscriptionCallback = $callable; + } + + /** + * Sets a callback that gets invoked when a message is received on a + * channel that does not have an associated callback. + * + * @param mixed $callable A callback. + */ + public function defaultCallback($callable = null) + { + if (isset($callable)) { + $this->assertCallback($callable); + } + + $this->subscriptionCallback = $callable; + } + + /** + * Binds a callback to a channel. + * + * @param string $channel Channel name. + * @param callable $callback A callback. + */ + public function attachCallback($channel, $callback) + { + $callbackName = $this->getPrefixKeys().$channel; + + $this->assertCallback($callback); + $this->callbacks[$callbackName] = $callback; + $this->pubsub->subscribe($channel); + } + + /** + * Stops listening to a channel and removes the associated callback. + * + * @param string $channel Redis channel. + */ + public function detachCallback($channel) + { + $callbackName = $this->getPrefixKeys().$channel; + + if (isset($this->callbacks[$callbackName])) { + unset($this->callbacks[$callbackName]); + $this->pubsub->unsubscribe($channel); + } + } + + /** + * Starts the dispatcher loop. + */ + public function run() + { + foreach ($this->pubsub as $message) { + $kind = $message->kind; + + if ($kind !== Consumer::MESSAGE && $kind !== Consumer::PMESSAGE) { + if (isset($this->subscriptionCallback)) { + $callback = $this->subscriptionCallback; + call_user_func($callback, $message); + } + + continue; + } + + if (isset($this->callbacks[$message->channel])) { + $callback = $this->callbacks[$message->channel]; + call_user_func($callback, $message->payload); + } elseif (isset($this->defaultCallback)) { + $callback = $this->defaultCallback; + call_user_func($callback, $message); + } + } + } + + /** + * Terminates the dispatcher loop. + */ + public function stop() + { + $this->pubsub->stop(); + } + + /** + * Return the prefix used for keys. + * + * @return string + */ + protected function getPrefixKeys() + { + $options = $this->pubsub->getClient()->getOptions(); + + if (isset($options->prefix)) { + return $options->prefix->getPrefix(); + } + + return ''; + } +} diff --git a/vendor/predis/predis/src/Replication/MissingMasterException.php b/vendor/predis/predis/src/Replication/MissingMasterException.php new file mode 100644 index 00000000..7f4007f1 --- /dev/null +++ b/vendor/predis/predis/src/Replication/MissingMasterException.php @@ -0,0 +1,23 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Replication; + +use Predis\ClientException; + +/** + * Exception class that identifies when master is missing in a replication setup. + * + * @author Daniele Alessandri + */ +class MissingMasterException extends ClientException +{ +} diff --git a/vendor/predis/predis/src/Replication/ReplicationStrategy.php b/vendor/predis/predis/src/Replication/ReplicationStrategy.php new file mode 100644 index 00000000..c0f7b137 --- /dev/null +++ b/vendor/predis/predis/src/Replication/ReplicationStrategy.php @@ -0,0 +1,304 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Replication; + +use Predis\Command\CommandInterface; +use Predis\NotSupportedException; + +/** + * Defines a strategy for master/slave replication. + * + * @author Daniele Alessandri + */ +class ReplicationStrategy +{ + protected $disallowed; + protected $readonly; + protected $readonlySHA1; + + /** + * + */ + public function __construct() + { + $this->disallowed = $this->getDisallowedOperations(); + $this->readonly = $this->getReadOnlyOperations(); + $this->readonlySHA1 = array(); + } + + /** + * Returns if the specified command will perform a read-only operation + * on Redis or not. + * + * @param CommandInterface $command Command instance. + * + * @throws NotSupportedException + * + * @return bool + */ + public function isReadOperation(CommandInterface $command) + { + if (isset($this->disallowed[$id = $command->getId()])) { + throw new NotSupportedException( + "The command '$id' is not allowed in replication mode." + ); + } + + if (isset($this->readonly[$id])) { + if (true === $readonly = $this->readonly[$id]) { + return true; + } + + return call_user_func($readonly, $command); + } + + if (($eval = $id === 'EVAL') || $id === 'EVALSHA') { + $sha1 = $eval ? sha1($command->getArgument(0)) : $command->getArgument(0); + + if (isset($this->readonlySHA1[$sha1])) { + if (true === $readonly = $this->readonlySHA1[$sha1]) { + return true; + } + + return call_user_func($readonly, $command); + } + } + + return false; + } + + /** + * Returns if the specified command is not allowed for execution in a master + * / slave replication context. + * + * @param CommandInterface $command Command instance. + * + * @return bool + */ + public function isDisallowedOperation(CommandInterface $command) + { + return isset($this->disallowed[$command->getId()]); + } + + /** + * Checks if a SORT command is a readable operation by parsing the arguments + * array of the specified commad instance. + * + * @param CommandInterface $command Command instance. + * + * @return bool + */ + protected function isSortReadOnly(CommandInterface $command) + { + $arguments = $command->getArguments(); + $argc = count($arguments); + + if ($argc > 1) { + for ($i = 1; $i < $argc; ++$i) { + $argument = strtoupper($arguments[$i]); + if ($argument === 'STORE') { + return false; + } + } + } + + return true; + } + + /** + * Checks if BITFIELD performs a read-only operation by looking for certain + * SET and INCRYBY modifiers in the arguments array of the command. + * + * @param CommandInterface $command Command instance. + * + * @return bool + */ + protected function isBitfieldReadOnly(CommandInterface $command) + { + $arguments = $command->getArguments(); + $argc = count($arguments); + + if ($argc >= 2) { + for ($i = 1; $i < $argc; ++$i) { + $argument = strtoupper($arguments[$i]); + if ($argument === 'SET' || $argument === 'INCRBY') { + return false; + } + } + } + + return true; + } + + /** + * Checks if a GEORADIUS command is a readable operation by parsing the + * arguments array of the specified commad instance. + * + * @param CommandInterface $command Command instance. + * + * @return bool + */ + protected function isGeoradiusReadOnly(CommandInterface $command) + { + $arguments = $command->getArguments(); + $argc = count($arguments); + $startIndex = $command->getId() === 'GEORADIUS' ? 5 : 4; + + if ($argc > $startIndex) { + for ($i = $startIndex; $i < $argc; ++$i) { + $argument = strtoupper($arguments[$i]); + if ($argument === 'STORE' || $argument === 'STOREDIST') { + return false; + } + } + } + + return true; + } + + /** + * Marks a command as a read-only operation. + * + * When the behavior of a command can be decided only at runtime depending + * on its arguments, a callable object can be provided to dynamically check + * if the specified command performs a read or a write operation. + * + * @param string $commandID Command ID. + * @param mixed $readonly A boolean value or a callable object. + */ + public function setCommandReadOnly($commandID, $readonly = true) + { + $commandID = strtoupper($commandID); + + if ($readonly) { + $this->readonly[$commandID] = $readonly; + } else { + unset($this->readonly[$commandID]); + } + } + + /** + * Marks a Lua script for EVAL and EVALSHA as a read-only operation. When + * the behaviour of a script can be decided only at runtime depending on + * its arguments, a callable object can be provided to dynamically check + * if the passed instance of EVAL or EVALSHA performs write operations or + * not. + * + * @param string $script Body of the Lua script. + * @param mixed $readonly A boolean value or a callable object. + */ + public function setScriptReadOnly($script, $readonly = true) + { + $sha1 = sha1($script); + + if ($readonly) { + $this->readonlySHA1[$sha1] = $readonly; + } else { + unset($this->readonlySHA1[$sha1]); + } + } + + /** + * Returns the default list of disallowed commands. + * + * @return array + */ + protected function getDisallowedOperations() + { + return array( + 'SHUTDOWN' => true, + 'INFO' => true, + 'DBSIZE' => true, + 'LASTSAVE' => true, + 'CONFIG' => true, + 'MONITOR' => true, + 'SLAVEOF' => true, + 'SAVE' => true, + 'BGSAVE' => true, + 'BGREWRITEAOF' => true, + 'SLOWLOG' => true, + ); + } + + /** + * Returns the default list of commands performing read-only operations. + * + * @return array + */ + protected function getReadOnlyOperations() + { + return array( + 'EXISTS' => true, + 'TYPE' => true, + 'KEYS' => true, + 'SCAN' => true, + 'RANDOMKEY' => true, + 'TTL' => true, + 'GET' => true, + 'MGET' => true, + 'SUBSTR' => true, + 'STRLEN' => true, + 'GETRANGE' => true, + 'GETBIT' => true, + 'LLEN' => true, + 'LRANGE' => true, + 'LINDEX' => true, + 'SCARD' => true, + 'SISMEMBER' => true, + 'SINTER' => true, + 'SUNION' => true, + 'SDIFF' => true, + 'SMEMBERS' => true, + 'SSCAN' => true, + 'SRANDMEMBER' => true, + 'ZRANGE' => true, + 'ZREVRANGE' => true, + 'ZRANGEBYSCORE' => true, + 'ZREVRANGEBYSCORE' => true, + 'ZCARD' => true, + 'ZSCORE' => true, + 'ZCOUNT' => true, + 'ZRANK' => true, + 'ZREVRANK' => true, + 'ZSCAN' => true, + 'ZLEXCOUNT' => true, + 'ZRANGEBYLEX' => true, + 'ZREVRANGEBYLEX' => true, + 'HGET' => true, + 'HMGET' => true, + 'HEXISTS' => true, + 'HLEN' => true, + 'HKEYS' => true, + 'HVALS' => true, + 'HGETALL' => true, + 'HSCAN' => true, + 'HSTRLEN' => true, + 'PING' => true, + 'AUTH' => true, + 'SELECT' => true, + 'ECHO' => true, + 'QUIT' => true, + 'OBJECT' => true, + 'BITCOUNT' => true, + 'BITPOS' => true, + 'TIME' => true, + 'PFCOUNT' => true, + 'SORT' => array($this, 'isSortReadOnly'), + 'BITFIELD' => array($this, 'isBitfieldReadOnly'), + 'GEOHASH' => true, + 'GEOPOS' => true, + 'GEODIST' => true, + 'GEORADIUS' => array($this, 'isGeoradiusReadOnly'), + 'GEORADIUSBYMEMBER' => array($this, 'isGeoradiusReadOnly'), + ); + } +} diff --git a/vendor/predis/predis/src/Replication/RoleException.php b/vendor/predis/predis/src/Replication/RoleException.php new file mode 100644 index 00000000..0d93f323 --- /dev/null +++ b/vendor/predis/predis/src/Replication/RoleException.php @@ -0,0 +1,24 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Replication; + +use Predis\CommunicationException; + +/** + * Exception class that identifies a role mismatch when connecting to node + * managed by redis-sentinel. + * + * @author Daniele Alessandri + */ +class RoleException extends CommunicationException +{ +} diff --git a/vendor/predis/predis/src/Response/Error.php b/vendor/predis/predis/src/Response/Error.php new file mode 100644 index 00000000..92b67c2e --- /dev/null +++ b/vendor/predis/predis/src/Response/Error.php @@ -0,0 +1,59 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Response; + +/** + * Represents an error returned by Redis (-ERR responses) during the execution + * of a command on the server. + * + * @author Daniele Alessandri + */ +class Error implements ErrorInterface +{ + private $message; + + /** + * @param string $message Error message returned by Redis + */ + public function __construct($message) + { + $this->message = $message; + } + + /** + * {@inheritdoc} + */ + public function getMessage() + { + return $this->message; + } + + /** + * {@inheritdoc} + */ + public function getErrorType() + { + list($errorType) = explode(' ', $this->getMessage(), 2); + + return $errorType; + } + + /** + * Converts the object to its string representation. + * + * @return string + */ + public function __toString() + { + return $this->getMessage(); + } +} diff --git a/vendor/predis/predis/src/Response/ErrorInterface.php b/vendor/predis/predis/src/Response/ErrorInterface.php new file mode 100644 index 00000000..316597e8 --- /dev/null +++ b/vendor/predis/predis/src/Response/ErrorInterface.php @@ -0,0 +1,35 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Response; + +/** + * Represents an error returned by Redis (responses identified by "-" in the + * Redis protocol) during the execution of an operation on the server. + * + * @author Daniele Alessandri + */ +interface ErrorInterface extends ResponseInterface +{ + /** + * Returns the error message. + * + * @return string + */ + public function getMessage(); + + /** + * Returns the error type (e.g. ERR, ASK, MOVED). + * + * @return string + */ + public function getErrorType(); +} diff --git a/vendor/predis/predis/src/Response/Iterator/MultiBulk.php b/vendor/predis/predis/src/Response/Iterator/MultiBulk.php new file mode 100644 index 00000000..7e263655 --- /dev/null +++ b/vendor/predis/predis/src/Response/Iterator/MultiBulk.php @@ -0,0 +1,77 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Response\Iterator; + +use Predis\Connection\NodeConnectionInterface; + +/** + * Streamable multibulk response. + * + * @author Daniele Alessandri + */ +class MultiBulk extends MultiBulkIterator +{ + private $connection; + + /** + * @param NodeConnectionInterface $connection Connection to Redis. + * @param int $size Number of elements of the multibulk response. + */ + public function __construct(NodeConnectionInterface $connection, $size) + { + $this->connection = $connection; + $this->size = $size; + $this->position = 0; + $this->current = $size > 0 ? $this->getValue() : null; + } + + /** + * Handles the synchronization of the client with the Redis protocol when + * the garbage collector kicks in (e.g. when the iterator goes out of the + * scope of a foreach or it is unset). + */ + public function __destruct() + { + $this->drop(true); + } + + /** + * Drop queued elements that have not been read from the connection either + * by consuming the rest of the multibulk response or quickly by closing the + * underlying connection. + * + * @param bool $disconnect Consume the iterator or drop the connection. + */ + public function drop($disconnect = false) + { + if ($disconnect) { + if ($this->valid()) { + $this->position = $this->size; + $this->connection->disconnect(); + } + } else { + while ($this->valid()) { + $this->next(); + } + } + } + + /** + * Reads the next item of the multibulk response from the connection. + * + * @return mixed + */ + protected function getValue() + { + return $this->connection->read(); + } +} diff --git a/vendor/predis/predis/src/Response/Iterator/MultiBulkIterator.php b/vendor/predis/predis/src/Response/Iterator/MultiBulkIterator.php new file mode 100644 index 00000000..04e16857 --- /dev/null +++ b/vendor/predis/predis/src/Response/Iterator/MultiBulkIterator.php @@ -0,0 +1,104 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Response\Iterator; + +use Predis\Response\ResponseInterface; + +/** + * Iterator that abstracts the access to multibulk responses allowing them to be + * consumed in a streamable fashion without keeping the whole payload in memory. + * + * This iterator does not support rewinding which means that the iteration, once + * consumed, cannot be restarted. + * + * Always make sure that the whole iteration is consumed (or dropped) to prevent + * protocol desynchronization issues. + * + * @author Daniele Alessandri + */ +abstract class MultiBulkIterator implements \Iterator, \Countable, ResponseInterface +{ + protected $current; + protected $position; + protected $size; + + /** + * {@inheritdoc} + */ + public function rewind() + { + // NOOP + } + + /** + * {@inheritdoc} + */ + public function current() + { + return $this->current; + } + + /** + * {@inheritdoc} + */ + public function key() + { + return $this->position; + } + + /** + * {@inheritdoc} + */ + public function next() + { + if (++$this->position < $this->size) { + $this->current = $this->getValue(); + } + } + + /** + * {@inheritdoc} + */ + public function valid() + { + return $this->position < $this->size; + } + + /** + * Returns the number of items comprising the whole multibulk response. + * + * This method should be used instead of iterator_count() to get the size of + * the current multibulk response since the former consumes the iteration to + * count the number of elements, but our iterators do not support rewinding. + * + * @return int + */ + public function count() + { + return $this->size; + } + + /** + * Returns the current position of the iterator. + * + * @return int + */ + public function getPosition() + { + return $this->position; + } + + /** + * {@inheritdoc} + */ + abstract protected function getValue(); +} diff --git a/vendor/predis/predis/src/Response/Iterator/MultiBulkTuple.php b/vendor/predis/predis/src/Response/Iterator/MultiBulkTuple.php new file mode 100644 index 00000000..433fa75c --- /dev/null +++ b/vendor/predis/predis/src/Response/Iterator/MultiBulkTuple.php @@ -0,0 +1,90 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Response\Iterator; + +/** + * Outer iterator consuming streamable multibulk responses by yielding tuples of + * keys and values. + * + * This wrapper is useful for responses to commands such as `HGETALL` that can + * be iterater as $key => $value pairs. + * + * @author Daniele Alessandri + */ +class MultiBulkTuple extends MultiBulk implements \OuterIterator +{ + private $iterator; + + /** + * @param MultiBulk $iterator Inner multibulk response iterator. + */ + public function __construct(MultiBulk $iterator) + { + $this->checkPreconditions($iterator); + + $this->size = count($iterator) / 2; + $this->iterator = $iterator; + $this->position = $iterator->getPosition(); + $this->current = $this->size > 0 ? $this->getValue() : null; + } + + /** + * Checks for valid preconditions. + * + * @param MultiBulk $iterator Inner multibulk response iterator. + * + * @throws \InvalidArgumentException + * @throws \UnexpectedValueException + */ + protected function checkPreconditions(MultiBulk $iterator) + { + if ($iterator->getPosition() !== 0) { + throw new \InvalidArgumentException( + 'Cannot initialize a tuple iterator using an already initiated iterator.' + ); + } + + if (($size = count($iterator)) % 2 !== 0) { + throw new \UnexpectedValueException('Invalid response size for a tuple iterator.'); + } + } + + /** + * {@inheritdoc} + */ + public function getInnerIterator() + { + return $this->iterator; + } + + /** + * {@inheritdoc} + */ + public function __destruct() + { + $this->iterator->drop(true); + } + + /** + * {@inheritdoc} + */ + protected function getValue() + { + $k = $this->iterator->current(); + $this->iterator->next(); + + $v = $this->iterator->current(); + $this->iterator->next(); + + return array($k, $v); + } +} diff --git a/vendor/predis/predis/src/Response/ResponseInterface.php b/vendor/predis/predis/src/Response/ResponseInterface.php new file mode 100644 index 00000000..ec3face5 --- /dev/null +++ b/vendor/predis/predis/src/Response/ResponseInterface.php @@ -0,0 +1,21 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Response; + +/** + * Represents a complex response object from Redis. + * + * @author Daniele Alessandri + */ +interface ResponseInterface +{ +} diff --git a/vendor/predis/predis/src/Response/ServerException.php b/vendor/predis/predis/src/Response/ServerException.php new file mode 100644 index 00000000..12fb1cff --- /dev/null +++ b/vendor/predis/predis/src/Response/ServerException.php @@ -0,0 +1,44 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Response; + +use Predis\PredisException; + +/** + * Exception class that identifies server-side Redis errors. + * + * @author Daniele Alessandri + */ +class ServerException extends PredisException implements ErrorInterface +{ + /** + * Gets the type of the error returned by Redis. + * + * @return string + */ + public function getErrorType() + { + list($errorType) = explode(' ', $this->getMessage(), 2); + + return $errorType; + } + + /** + * Converts the exception to an instance of Predis\Response\Error. + * + * @return Error + */ + public function toErrorResponse() + { + return new Error($this->getMessage()); + } +} diff --git a/vendor/predis/predis/src/Response/Status.php b/vendor/predis/predis/src/Response/Status.php new file mode 100644 index 00000000..180035de --- /dev/null +++ b/vendor/predis/predis/src/Response/Status.php @@ -0,0 +1,79 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Response; + +/** + * Represents a status response returned by Redis. + * + * @author Daniele Alessandri + */ +class Status implements ResponseInterface +{ + private static $OK; + private static $QUEUED; + + private $payload; + + /** + * @param string $payload Payload of the status response as returned by Redis. + */ + public function __construct($payload) + { + $this->payload = $payload; + } + + /** + * Converts the response object to its string representation. + * + * @return string + */ + public function __toString() + { + return $this->payload; + } + + /** + * Returns the payload of status response. + * + * @return string + */ + public function getPayload() + { + return $this->payload; + } + + /** + * Returns an instance of a status response object. + * + * Common status responses such as OK or QUEUED are cached in order to lower + * the global memory usage especially when using pipelines. + * + * @param string $payload Status response payload. + * + * @return string + */ + public static function get($payload) + { + switch ($payload) { + case 'OK': + case 'QUEUED': + if (isset(self::$$payload)) { + return self::$$payload; + } + + return self::$$payload = new self($payload); + + default: + return new self($payload); + } + } +} diff --git a/vendor/predis/predis/src/Session/Handler.php b/vendor/predis/predis/src/Session/Handler.php new file mode 100644 index 00000000..10f31331 --- /dev/null +++ b/vendor/predis/predis/src/Session/Handler.php @@ -0,0 +1,142 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Session; + +use Predis\ClientInterface; + +/** + * Session handler class that relies on Predis\Client to store PHP's sessions + * data into one or multiple Redis servers. + * + * This class is mostly intended for PHP 5.4 but it can be used under PHP 5.3 + * provided that a polyfill for `SessionHandlerInterface` is defined by either + * you or an external package such as `symfony/http-foundation`. + * + * @author Daniele Alessandri + */ +class Handler implements \SessionHandlerInterface +{ + protected $client; + protected $ttl; + + /** + * @param ClientInterface $client Fully initialized client instance. + * @param array $options Session handler options. + */ + public function __construct(ClientInterface $client, array $options = array()) + { + $this->client = $client; + + if (isset($options['gc_maxlifetime'])) { + $this->ttl = (int) $options['gc_maxlifetime']; + } else { + $this->ttl = ini_get('session.gc_maxlifetime'); + } + } + + /** + * Registers this instance as the current session handler. + */ + public function register() + { + if (PHP_VERSION_ID >= 50400) { + session_set_save_handler($this, true); + } else { + session_set_save_handler( + array($this, 'open'), + array($this, 'close'), + array($this, 'read'), + array($this, 'write'), + array($this, 'destroy'), + array($this, 'gc') + ); + } + } + + /** + * {@inheritdoc} + */ + public function open($save_path, $session_id) + { + // NOOP + return true; + } + + /** + * {@inheritdoc} + */ + public function close() + { + // NOOP + return true; + } + + /** + * {@inheritdoc} + */ + public function gc($maxlifetime) + { + // NOOP + return true; + } + + /** + * {@inheritdoc} + */ + public function read($session_id) + { + if ($data = $this->client->get($session_id)) { + return $data; + } + + return ''; + } + /** + * {@inheritdoc} + */ + public function write($session_id, $session_data) + { + $this->client->setex($session_id, $this->ttl, $session_data); + + return true; + } + + /** + * {@inheritdoc} + */ + public function destroy($session_id) + { + $this->client->del($session_id); + + return true; + } + + /** + * Returns the underlying client instance. + * + * @return ClientInterface + */ + public function getClient() + { + return $this->client; + } + + /** + * Returns the session max lifetime value. + * + * @return int + */ + public function getMaxLifeTime() + { + return $this->ttl; + } +} diff --git a/vendor/predis/predis/src/Transaction/AbortedMultiExecException.php b/vendor/predis/predis/src/Transaction/AbortedMultiExecException.php new file mode 100644 index 00000000..f6064d26 --- /dev/null +++ b/vendor/predis/predis/src/Transaction/AbortedMultiExecException.php @@ -0,0 +1,45 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Transaction; + +use Predis\PredisException; + +/** + * Exception class that identifies a MULTI / EXEC transaction aborted by Redis. + * + * @author Daniele Alessandri + */ +class AbortedMultiExecException extends PredisException +{ + private $transaction; + + /** + * @param MultiExec $transaction Transaction that generated the exception. + * @param string $message Error message. + * @param int $code Error code. + */ + public function __construct(MultiExec $transaction, $message, $code = null) + { + parent::__construct($message, $code); + $this->transaction = $transaction; + } + + /** + * Returns the transaction that generated the exception. + * + * @return MultiExec + */ + public function getTransaction() + { + return $this->transaction; + } +} diff --git a/vendor/predis/predis/src/Transaction/MultiExec.php b/vendor/predis/predis/src/Transaction/MultiExec.php new file mode 100644 index 00000000..04a06644 --- /dev/null +++ b/vendor/predis/predis/src/Transaction/MultiExec.php @@ -0,0 +1,461 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Transaction; + +use Predis\ClientContextInterface; +use Predis\ClientException; +use Predis\ClientInterface; +use Predis\Command\CommandInterface; +use Predis\CommunicationException; +use Predis\Connection\AggregateConnectionInterface; +use Predis\NotSupportedException; +use Predis\Protocol\ProtocolException; +use Predis\Response\ErrorInterface as ErrorResponseInterface; +use Predis\Response\ServerException; +use Predis\Response\Status as StatusResponse; + +/** + * Client-side abstraction of a Redis transaction based on MULTI / EXEC. + * + * {@inheritdoc} + * + * @author Daniele Alessandri + */ +class MultiExec implements ClientContextInterface +{ + private $state; + + protected $client; + protected $commands; + protected $exceptions = true; + protected $attempts = 0; + protected $watchKeys = array(); + protected $modeCAS = false; + + /** + * @param ClientInterface $client Client instance used by the transaction. + * @param array $options Initialization options. + */ + public function __construct(ClientInterface $client, array $options = null) + { + $this->assertClient($client); + + $this->client = $client; + $this->state = new MultiExecState(); + + $this->configure($client, $options ?: array()); + $this->reset(); + } + + /** + * Checks if the passed client instance satisfies the required conditions + * needed to initialize the transaction object. + * + * @param ClientInterface $client Client instance used by the transaction object. + * + * @throws NotSupportedException + */ + private function assertClient(ClientInterface $client) + { + if ($client->getConnection() instanceof AggregateConnectionInterface) { + throw new NotSupportedException( + 'Cannot initialize a MULTI/EXEC transaction over aggregate connections.' + ); + } + + if (!$client->getProfile()->supportsCommands(array('MULTI', 'EXEC', 'DISCARD'))) { + throw new NotSupportedException( + 'The current profile does not support MULTI, EXEC and DISCARD.' + ); + } + } + + /** + * Configures the transaction using the provided options. + * + * @param ClientInterface $client Underlying client instance. + * @param array $options Array of options for the transaction. + **/ + protected function configure(ClientInterface $client, array $options) + { + if (isset($options['exceptions'])) { + $this->exceptions = (bool) $options['exceptions']; + } else { + $this->exceptions = $client->getOptions()->exceptions; + } + + if (isset($options['cas'])) { + $this->modeCAS = (bool) $options['cas']; + } + + if (isset($options['watch']) && $keys = $options['watch']) { + $this->watchKeys = $keys; + } + + if (isset($options['retry'])) { + $this->attempts = (int) $options['retry']; + } + } + + /** + * Resets the state of the transaction. + */ + protected function reset() + { + $this->state->reset(); + $this->commands = new \SplQueue(); + } + + /** + * Initializes the transaction context. + */ + protected function initialize() + { + if ($this->state->isInitialized()) { + return; + } + + if ($this->modeCAS) { + $this->state->flag(MultiExecState::CAS); + } + + if ($this->watchKeys) { + $this->watch($this->watchKeys); + } + + $cas = $this->state->isCAS(); + $discarded = $this->state->isDiscarded(); + + if (!$cas || ($cas && $discarded)) { + $this->call('MULTI'); + + if ($discarded) { + $this->state->unflag(MultiExecState::CAS); + } + } + + $this->state->unflag(MultiExecState::DISCARDED); + $this->state->flag(MultiExecState::INITIALIZED); + } + + /** + * Dynamically invokes a Redis command with the specified arguments. + * + * @param string $method Command ID. + * @param array $arguments Arguments for the command. + * + * @return mixed + */ + public function __call($method, $arguments) + { + return $this->executeCommand( + $this->client->createCommand($method, $arguments) + ); + } + + /** + * Executes a Redis command bypassing the transaction logic. + * + * @param string $commandID Command ID. + * @param array $arguments Arguments for the command. + * + * @throws ServerException + * + * @return mixed + */ + protected function call($commandID, array $arguments = array()) + { + $response = $this->client->executeCommand( + $this->client->createCommand($commandID, $arguments) + ); + + if ($response instanceof ErrorResponseInterface) { + throw new ServerException($response->getMessage()); + } + + return $response; + } + + /** + * Executes the specified Redis command. + * + * @param CommandInterface $command Command instance. + * + * @throws AbortedMultiExecException + * @throws CommunicationException + * + * @return $this|mixed + */ + public function executeCommand(CommandInterface $command) + { + $this->initialize(); + + if ($this->state->isCAS()) { + return $this->client->executeCommand($command); + } + + $response = $this->client->getConnection()->executeCommand($command); + + if ($response instanceof StatusResponse && $response == 'QUEUED') { + $this->commands->enqueue($command); + } elseif ($response instanceof ErrorResponseInterface) { + throw new AbortedMultiExecException($this, $response->getMessage()); + } else { + $this->onProtocolError('The server did not return a +QUEUED status response.'); + } + + return $this; + } + + /** + * Executes WATCH against one or more keys. + * + * @param string|array $keys One or more keys. + * + * @throws NotSupportedException + * @throws ClientException + * + * @return mixed + */ + public function watch($keys) + { + if (!$this->client->getProfile()->supportsCommand('WATCH')) { + throw new NotSupportedException('WATCH is not supported by the current profile.'); + } + + if ($this->state->isWatchAllowed()) { + throw new ClientException('Sending WATCH after MULTI is not allowed.'); + } + + $response = $this->call('WATCH', is_array($keys) ? $keys : array($keys)); + $this->state->flag(MultiExecState::WATCH); + + return $response; + } + + /** + * Finalizes the transaction by executing MULTI on the server. + * + * @return MultiExec + */ + public function multi() + { + if ($this->state->check(MultiExecState::INITIALIZED | MultiExecState::CAS)) { + $this->state->unflag(MultiExecState::CAS); + $this->call('MULTI'); + } else { + $this->initialize(); + } + + return $this; + } + + /** + * Executes UNWATCH. + * + * @throws NotSupportedException + * + * @return MultiExec + */ + public function unwatch() + { + if (!$this->client->getProfile()->supportsCommand('UNWATCH')) { + throw new NotSupportedException( + 'UNWATCH is not supported by the current profile.' + ); + } + + $this->state->unflag(MultiExecState::WATCH); + $this->__call('UNWATCH', array()); + + return $this; + } + + /** + * Resets the transaction by UNWATCH-ing the keys that are being WATCHed and + * DISCARD-ing pending commands that have been already sent to the server. + * + * @return MultiExec + */ + public function discard() + { + if ($this->state->isInitialized()) { + $this->call($this->state->isCAS() ? 'UNWATCH' : 'DISCARD'); + + $this->reset(); + $this->state->flag(MultiExecState::DISCARDED); + } + + return $this; + } + + /** + * Executes the whole transaction. + * + * @return mixed + */ + public function exec() + { + return $this->execute(); + } + + /** + * Checks the state of the transaction before execution. + * + * @param mixed $callable Callback for execution. + * + * @throws \InvalidArgumentException + * @throws ClientException + */ + private function checkBeforeExecution($callable) + { + if ($this->state->isExecuting()) { + throw new ClientException( + 'Cannot invoke "execute" or "exec" inside an active transaction context.' + ); + } + + if ($callable) { + if (!is_callable($callable)) { + throw new \InvalidArgumentException('The argument must be a callable object.'); + } + + if (!$this->commands->isEmpty()) { + $this->discard(); + + throw new ClientException( + 'Cannot execute a transaction block after using fluent interface.' + ); + } + } elseif ($this->attempts) { + $this->discard(); + + throw new ClientException( + 'Automatic retries are supported only when a callable block is provided.' + ); + } + } + + /** + * Handles the actual execution of the whole transaction. + * + * @param mixed $callable Optional callback for execution. + * + * @throws CommunicationException + * @throws AbortedMultiExecException + * @throws ServerException + * + * @return array + */ + public function execute($callable = null) + { + $this->checkBeforeExecution($callable); + + $execResponse = null; + $attempts = $this->attempts; + + do { + if ($callable) { + $this->executeTransactionBlock($callable); + } + + if ($this->commands->isEmpty()) { + if ($this->state->isWatching()) { + $this->discard(); + } + + return; + } + + $execResponse = $this->call('EXEC'); + + if ($execResponse === null) { + if ($attempts === 0) { + throw new AbortedMultiExecException( + $this, 'The current transaction has been aborted by the server.' + ); + } + + $this->reset(); + + continue; + } + + break; + } while ($attempts-- > 0); + + $response = array(); + $commands = $this->commands; + $size = count($execResponse); + + if ($size !== count($commands)) { + $this->onProtocolError('EXEC returned an unexpected number of response items.'); + } + + for ($i = 0; $i < $size; ++$i) { + $cmdResponse = $execResponse[$i]; + + if ($cmdResponse instanceof ErrorResponseInterface && $this->exceptions) { + throw new ServerException($cmdResponse->getMessage()); + } + + $response[$i] = $commands->dequeue()->parseResponse($cmdResponse); + } + + return $response; + } + + /** + * Passes the current transaction object to a callable block for execution. + * + * @param mixed $callable Callback. + * + * @throws CommunicationException + * @throws ServerException + */ + protected function executeTransactionBlock($callable) + { + $exception = null; + $this->state->flag(MultiExecState::INSIDEBLOCK); + + try { + call_user_func($callable, $this); + } catch (CommunicationException $exception) { + // NOOP + } catch (ServerException $exception) { + // NOOP + } catch (\Exception $exception) { + $this->discard(); + } + + $this->state->unflag(MultiExecState::INSIDEBLOCK); + + if ($exception) { + throw $exception; + } + } + + /** + * Helper method for protocol errors encountered inside the transaction. + * + * @param string $message Error message. + */ + private function onProtocolError($message) + { + // Since a MULTI/EXEC block cannot be initialized when using aggregate + // connections we can safely assume that Predis\Client::getConnection() + // will return a Predis\Connection\NodeConnectionInterface instance. + CommunicationException::handle(new ProtocolException( + $this->client->getConnection(), $message + )); + } +} diff --git a/vendor/predis/predis/src/Transaction/MultiExecState.php b/vendor/predis/predis/src/Transaction/MultiExecState.php new file mode 100644 index 00000000..29d205fc --- /dev/null +++ b/vendor/predis/predis/src/Transaction/MultiExecState.php @@ -0,0 +1,166 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Predis\Transaction; + +/** + * Utility class used to track the state of a MULTI / EXEC transaction. + * + * @author Daniele Alessandri + */ +class MultiExecState +{ + const INITIALIZED = 1; // 0b00001 + const INSIDEBLOCK = 2; // 0b00010 + const DISCARDED = 4; // 0b00100 + const CAS = 8; // 0b01000 + const WATCH = 16; // 0b10000 + + private $flags; + + /** + * + */ + public function __construct() + { + $this->flags = 0; + } + + /** + * Sets the internal state flags. + * + * @param int $flags Set of flags + */ + public function set($flags) + { + $this->flags = $flags; + } + + /** + * Gets the internal state flags. + * + * @return int + */ + public function get() + { + return $this->flags; + } + + /** + * Sets one or more flags. + * + * @param int $flags Set of flags + */ + public function flag($flags) + { + $this->flags |= $flags; + } + + /** + * Resets one or more flags. + * + * @param int $flags Set of flags + */ + public function unflag($flags) + { + $this->flags &= ~$flags; + } + + /** + * Returns if the specified flag or set of flags is set. + * + * @param int $flags Flag + * + * @return bool + */ + public function check($flags) + { + return ($this->flags & $flags) === $flags; + } + + /** + * Resets the state of a transaction. + */ + public function reset() + { + $this->flags = 0; + } + + /** + * Returns the state of the RESET flag. + * + * @return bool + */ + public function isReset() + { + return $this->flags === 0; + } + + /** + * Returns the state of the INITIALIZED flag. + * + * @return bool + */ + public function isInitialized() + { + return $this->check(self::INITIALIZED); + } + + /** + * Returns the state of the INSIDEBLOCK flag. + * + * @return bool + */ + public function isExecuting() + { + return $this->check(self::INSIDEBLOCK); + } + + /** + * Returns the state of the CAS flag. + * + * @return bool + */ + public function isCAS() + { + return $this->check(self::CAS); + } + + /** + * Returns if WATCH is allowed in the current state. + * + * @return bool + */ + public function isWatchAllowed() + { + return $this->check(self::INITIALIZED) && !$this->check(self::CAS); + } + + /** + * Returns the state of the WATCH flag. + * + * @return bool + */ + public function isWatching() + { + return $this->check(self::WATCH); + } + + /** + * Returns the state of the DISCARDED flag. + * + * @return bool + */ + public function isDiscarded() + { + return $this->check(self::DISCARDED); + } +} diff --git a/vendor/psr/http-message/CHANGELOG.md b/vendor/psr/http-message/CHANGELOG.md new file mode 100644 index 00000000..4e7cf83d --- /dev/null +++ b/vendor/psr/http-message/CHANGELOG.md @@ -0,0 +1,36 @@ +# Changelog + +All notable changes to this project will be documented in this file, in reverse chronological order by release. + +## 1.0.1 - 2016-08-06 + +### Added + +- Nothing. + +### Deprecated + +- Nothing. + +### Removed + +- Nothing. + +### Fixed + +- Updated all `@return self` annotation references in interfaces to use + `@return static`, which more closelly follows the semantics of the + specification. +- Updated the `MessageInterface::getHeaders()` return annotation to use the + value `string[][]`, indicating the format is a nested array of strings. +- Updated the `@link` annotation for `RequestInterface::withRequestTarget()` + to point to the correct section of RFC 7230. +- Updated the `ServerRequestInterface::withUploadedFiles()` parameter annotation + to add the parameter name (`$uploadedFiles`). +- Updated a `@throws` annotation for the `UploadedFileInterface::moveTo()` + method to correctly reference the method parameter (it was referencing an + incorrect parameter name previously). + +## 1.0.0 - 2016-05-18 + +Initial stable release; reflects accepted PSR-7 specification. diff --git a/vendor/psr/http-message/LICENSE b/vendor/psr/http-message/LICENSE new file mode 100644 index 00000000..4492a27b --- /dev/null +++ b/vendor/psr/http-message/LICENSE @@ -0,0 +1,19 @@ +Copyright (c) 2014 PHP Framework Interoperability Group + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +THE SOFTWARE. diff --git a/vendor/psr/http-message/README.md b/vendor/psr/http-message/README.md new file mode 100644 index 00000000..69626709 --- /dev/null +++ b/vendor/psr/http-message/README.md @@ -0,0 +1,13 @@ +PSR Http Message +================ + +This repository holds all interfaces/classes/traits related to +[PSR-7](http://www.php-fig.org/psr/psr-7/). + +Note that this is not a HTTP message implementation of its own. It is merely an +interface that describes a HTTP message. See the specification for more details. + +Usage +----- + +We'll certainly need some stuff in here. \ No newline at end of file diff --git a/vendor/psr/http-message/composer.json b/vendor/psr/http-message/composer.json new file mode 100644 index 00000000..c417ad8d --- /dev/null +++ b/vendor/psr/http-message/composer.json @@ -0,0 +1,26 @@ +{ + "name": "psr/http-message", + "description": "Common interface for HTTP messages", + "keywords": ["psr", "psr-7", "http", "http-message", "request", "response"], + "homepage": "https://github.com/php-fig/http-message", + "license": "MIT", + "authors": [ + { + "name": "PHP-FIG", + "homepage": "http://www.php-fig.org/" + } + ], + "require": { + "php": ">=5.3.0" + }, + "autoload": { + "psr-4": { + "Psr\\Http\\Message\\": "src/" + } + }, + "extra": { + "branch-alias": { + "dev-master": "1.0.x-dev" + } + } +} diff --git a/vendor/psr/http-message/src/MessageInterface.php b/vendor/psr/http-message/src/MessageInterface.php new file mode 100644 index 00000000..c4c1bd56 --- /dev/null +++ b/vendor/psr/http-message/src/MessageInterface.php @@ -0,0 +1,187 @@ +getHeaders() as $name => $values) { + * echo $name . ": " . implode(", ", $values); + * } + * + * // Emit headers iteratively: + * foreach ($message->getHeaders() as $name => $values) { + * foreach ($values as $value) { + * header(sprintf('%s: %s', $name, $value), false); + * } + * } + * + * While header names are not case-sensitive, getHeaders() will preserve the + * exact case in which headers were originally specified. + * + * @return string[][] Returns an associative array of the message's headers. Each + * key MUST be a header name, and each value MUST be an array of strings + * for that header. + */ + public function getHeaders(); + + /** + * Checks if a header exists by the given case-insensitive name. + * + * @param string $name Case-insensitive header field name. + * @return bool Returns true if any header names match the given header + * name using a case-insensitive string comparison. Returns false if + * no matching header name is found in the message. + */ + public function hasHeader($name); + + /** + * Retrieves a message header value by the given case-insensitive name. + * + * This method returns an array of all the header values of the given + * case-insensitive header name. + * + * If the header does not appear in the message, this method MUST return an + * empty array. + * + * @param string $name Case-insensitive header field name. + * @return string[] An array of string values as provided for the given + * header. If the header does not appear in the message, this method MUST + * return an empty array. + */ + public function getHeader($name); + + /** + * Retrieves a comma-separated string of the values for a single header. + * + * This method returns all of the header values of the given + * case-insensitive header name as a string concatenated together using + * a comma. + * + * NOTE: Not all header values may be appropriately represented using + * comma concatenation. For such headers, use getHeader() instead + * and supply your own delimiter when concatenating. + * + * If the header does not appear in the message, this method MUST return + * an empty string. + * + * @param string $name Case-insensitive header field name. + * @return string A string of values as provided for the given header + * concatenated together using a comma. If the header does not appear in + * the message, this method MUST return an empty string. + */ + public function getHeaderLine($name); + + /** + * Return an instance with the provided value replacing the specified header. + * + * While header names are case-insensitive, the casing of the header will + * be preserved by this function, and returned from getHeaders(). + * + * This method MUST be implemented in such a way as to retain the + * immutability of the message, and MUST return an instance that has the + * new and/or updated header and value. + * + * @param string $name Case-insensitive header field name. + * @param string|string[] $value Header value(s). + * @return static + * @throws \InvalidArgumentException for invalid header names or values. + */ + public function withHeader($name, $value); + + /** + * Return an instance with the specified header appended with the given value. + * + * Existing values for the specified header will be maintained. The new + * value(s) will be appended to the existing list. If the header did not + * exist previously, it will be added. + * + * This method MUST be implemented in such a way as to retain the + * immutability of the message, and MUST return an instance that has the + * new header and/or value. + * + * @param string $name Case-insensitive header field name to add. + * @param string|string[] $value Header value(s). + * @return static + * @throws \InvalidArgumentException for invalid header names or values. + */ + public function withAddedHeader($name, $value); + + /** + * Return an instance without the specified header. + * + * Header resolution MUST be done without case-sensitivity. + * + * This method MUST be implemented in such a way as to retain the + * immutability of the message, and MUST return an instance that removes + * the named header. + * + * @param string $name Case-insensitive header field name to remove. + * @return static + */ + public function withoutHeader($name); + + /** + * Gets the body of the message. + * + * @return StreamInterface Returns the body as a stream. + */ + public function getBody(); + + /** + * Return an instance with the specified message body. + * + * The body MUST be a StreamInterface object. + * + * This method MUST be implemented in such a way as to retain the + * immutability of the message, and MUST return a new instance that has the + * new body stream. + * + * @param StreamInterface $body Body. + * @return static + * @throws \InvalidArgumentException When the body is not valid. + */ + public function withBody(StreamInterface $body); +} diff --git a/vendor/psr/http-message/src/RequestInterface.php b/vendor/psr/http-message/src/RequestInterface.php new file mode 100644 index 00000000..199db445 --- /dev/null +++ b/vendor/psr/http-message/src/RequestInterface.php @@ -0,0 +1,129 @@ +getQuery()` + * or from the `QUERY_STRING` server param. + * + * @return array + */ + public function getQueryParams(); + + /** + * Return an instance with the specified query string arguments. + * + * These values SHOULD remain immutable over the course of the incoming + * request. They MAY be injected during instantiation, such as from PHP's + * $_GET superglobal, or MAY be derived from some other value such as the + * URI. In cases where the arguments are parsed from the URI, the data + * MUST be compatible with what PHP's parse_str() would return for + * purposes of how duplicate query parameters are handled, and how nested + * sets are handled. + * + * Setting query string arguments MUST NOT change the URI stored by the + * request, nor the values in the server params. + * + * This method MUST be implemented in such a way as to retain the + * immutability of the message, and MUST return an instance that has the + * updated query string arguments. + * + * @param array $query Array of query string arguments, typically from + * $_GET. + * @return static + */ + public function withQueryParams(array $query); + + /** + * Retrieve normalized file upload data. + * + * This method returns upload metadata in a normalized tree, with each leaf + * an instance of Psr\Http\Message\UploadedFileInterface. + * + * These values MAY be prepared from $_FILES or the message body during + * instantiation, or MAY be injected via withUploadedFiles(). + * + * @return array An array tree of UploadedFileInterface instances; an empty + * array MUST be returned if no data is present. + */ + public function getUploadedFiles(); + + /** + * Create a new instance with the specified uploaded files. + * + * This method MUST be implemented in such a way as to retain the + * immutability of the message, and MUST return an instance that has the + * updated body parameters. + * + * @param array $uploadedFiles An array tree of UploadedFileInterface instances. + * @return static + * @throws \InvalidArgumentException if an invalid structure is provided. + */ + public function withUploadedFiles(array $uploadedFiles); + + /** + * Retrieve any parameters provided in the request body. + * + * If the request Content-Type is either application/x-www-form-urlencoded + * or multipart/form-data, and the request method is POST, this method MUST + * return the contents of $_POST. + * + * Otherwise, this method may return any results of deserializing + * the request body content; as parsing returns structured content, the + * potential types MUST be arrays or objects only. A null value indicates + * the absence of body content. + * + * @return null|array|object The deserialized body parameters, if any. + * These will typically be an array or object. + */ + public function getParsedBody(); + + /** + * Return an instance with the specified body parameters. + * + * These MAY be injected during instantiation. + * + * If the request Content-Type is either application/x-www-form-urlencoded + * or multipart/form-data, and the request method is POST, use this method + * ONLY to inject the contents of $_POST. + * + * The data IS NOT REQUIRED to come from $_POST, but MUST be the results of + * deserializing the request body content. Deserialization/parsing returns + * structured data, and, as such, this method ONLY accepts arrays or objects, + * or a null value if nothing was available to parse. + * + * As an example, if content negotiation determines that the request data + * is a JSON payload, this method could be used to create a request + * instance with the deserialized parameters. + * + * This method MUST be implemented in such a way as to retain the + * immutability of the message, and MUST return an instance that has the + * updated body parameters. + * + * @param null|array|object $data The deserialized body data. This will + * typically be in an array or object. + * @return static + * @throws \InvalidArgumentException if an unsupported argument type is + * provided. + */ + public function withParsedBody($data); + + /** + * Retrieve attributes derived from the request. + * + * The request "attributes" may be used to allow injection of any + * parameters derived from the request: e.g., the results of path + * match operations; the results of decrypting cookies; the results of + * deserializing non-form-encoded message bodies; etc. Attributes + * will be application and request specific, and CAN be mutable. + * + * @return array Attributes derived from the request. + */ + public function getAttributes(); + + /** + * Retrieve a single derived request attribute. + * + * Retrieves a single derived request attribute as described in + * getAttributes(). If the attribute has not been previously set, returns + * the default value as provided. + * + * This method obviates the need for a hasAttribute() method, as it allows + * specifying a default value to return if the attribute is not found. + * + * @see getAttributes() + * @param string $name The attribute name. + * @param mixed $default Default value to return if the attribute does not exist. + * @return mixed + */ + public function getAttribute($name, $default = null); + + /** + * Return an instance with the specified derived request attribute. + * + * This method allows setting a single derived request attribute as + * described in getAttributes(). + * + * This method MUST be implemented in such a way as to retain the + * immutability of the message, and MUST return an instance that has the + * updated attribute. + * + * @see getAttributes() + * @param string $name The attribute name. + * @param mixed $value The value of the attribute. + * @return static + */ + public function withAttribute($name, $value); + + /** + * Return an instance that removes the specified derived request attribute. + * + * This method allows removing a single derived request attribute as + * described in getAttributes(). + * + * This method MUST be implemented in such a way as to retain the + * immutability of the message, and MUST return an instance that removes + * the attribute. + * + * @see getAttributes() + * @param string $name The attribute name. + * @return static + */ + public function withoutAttribute($name); +} diff --git a/vendor/psr/http-message/src/StreamInterface.php b/vendor/psr/http-message/src/StreamInterface.php new file mode 100644 index 00000000..69e652a3 --- /dev/null +++ b/vendor/psr/http-message/src/StreamInterface.php @@ -0,0 +1,158 @@ + + * [user-info@]host[:port] + * + * + * If the port component is not set or is the standard port for the current + * scheme, it SHOULD NOT be included. + * + * @see https://tools.ietf.org/html/rfc3986#section-3.2 + * @return string The URI authority, in "[user-info@]host[:port]" format. + */ + public function getAuthority(); + + /** + * Retrieve the user information component of the URI. + * + * If no user information is present, this method MUST return an empty + * string. + * + * If a user is present in the URI, this will return that value; + * additionally, if the password is also present, it will be appended to the + * user value, with a colon (":") separating the values. + * + * The trailing "@" character is not part of the user information and MUST + * NOT be added. + * + * @return string The URI user information, in "username[:password]" format. + */ + public function getUserInfo(); + + /** + * Retrieve the host component of the URI. + * + * If no host is present, this method MUST return an empty string. + * + * The value returned MUST be normalized to lowercase, per RFC 3986 + * Section 3.2.2. + * + * @see http://tools.ietf.org/html/rfc3986#section-3.2.2 + * @return string The URI host. + */ + public function getHost(); + + /** + * Retrieve the port component of the URI. + * + * If a port is present, and it is non-standard for the current scheme, + * this method MUST return it as an integer. If the port is the standard port + * used with the current scheme, this method SHOULD return null. + * + * If no port is present, and no scheme is present, this method MUST return + * a null value. + * + * If no port is present, but a scheme is present, this method MAY return + * the standard port for that scheme, but SHOULD return null. + * + * @return null|int The URI port. + */ + public function getPort(); + + /** + * Retrieve the path component of the URI. + * + * The path can either be empty or absolute (starting with a slash) or + * rootless (not starting with a slash). Implementations MUST support all + * three syntaxes. + * + * Normally, the empty path "" and absolute path "/" are considered equal as + * defined in RFC 7230 Section 2.7.3. But this method MUST NOT automatically + * do this normalization because in contexts with a trimmed base path, e.g. + * the front controller, this difference becomes significant. It's the task + * of the user to handle both "" and "/". + * + * The value returned MUST be percent-encoded, but MUST NOT double-encode + * any characters. To determine what characters to encode, please refer to + * RFC 3986, Sections 2 and 3.3. + * + * As an example, if the value should include a slash ("/") not intended as + * delimiter between path segments, that value MUST be passed in encoded + * form (e.g., "%2F") to the instance. + * + * @see https://tools.ietf.org/html/rfc3986#section-2 + * @see https://tools.ietf.org/html/rfc3986#section-3.3 + * @return string The URI path. + */ + public function getPath(); + + /** + * Retrieve the query string of the URI. + * + * If no query string is present, this method MUST return an empty string. + * + * The leading "?" character is not part of the query and MUST NOT be + * added. + * + * The value returned MUST be percent-encoded, but MUST NOT double-encode + * any characters. To determine what characters to encode, please refer to + * RFC 3986, Sections 2 and 3.4. + * + * As an example, if a value in a key/value pair of the query string should + * include an ampersand ("&") not intended as a delimiter between values, + * that value MUST be passed in encoded form (e.g., "%26") to the instance. + * + * @see https://tools.ietf.org/html/rfc3986#section-2 + * @see https://tools.ietf.org/html/rfc3986#section-3.4 + * @return string The URI query string. + */ + public function getQuery(); + + /** + * Retrieve the fragment component of the URI. + * + * If no fragment is present, this method MUST return an empty string. + * + * The leading "#" character is not part of the fragment and MUST NOT be + * added. + * + * The value returned MUST be percent-encoded, but MUST NOT double-encode + * any characters. To determine what characters to encode, please refer to + * RFC 3986, Sections 2 and 3.5. + * + * @see https://tools.ietf.org/html/rfc3986#section-2 + * @see https://tools.ietf.org/html/rfc3986#section-3.5 + * @return string The URI fragment. + */ + public function getFragment(); + + /** + * Return an instance with the specified scheme. + * + * This method MUST retain the state of the current instance, and return + * an instance that contains the specified scheme. + * + * Implementations MUST support the schemes "http" and "https" case + * insensitively, and MAY accommodate other schemes if required. + * + * An empty scheme is equivalent to removing the scheme. + * + * @param string $scheme The scheme to use with the new instance. + * @return static A new instance with the specified scheme. + * @throws \InvalidArgumentException for invalid or unsupported schemes. + */ + public function withScheme($scheme); + + /** + * Return an instance with the specified user information. + * + * This method MUST retain the state of the current instance, and return + * an instance that contains the specified user information. + * + * Password is optional, but the user information MUST include the + * user; an empty string for the user is equivalent to removing user + * information. + * + * @param string $user The user name to use for authority. + * @param null|string $password The password associated with $user. + * @return static A new instance with the specified user information. + */ + public function withUserInfo($user, $password = null); + + /** + * Return an instance with the specified host. + * + * This method MUST retain the state of the current instance, and return + * an instance that contains the specified host. + * + * An empty host value is equivalent to removing the host. + * + * @param string $host The hostname to use with the new instance. + * @return static A new instance with the specified host. + * @throws \InvalidArgumentException for invalid hostnames. + */ + public function withHost($host); + + /** + * Return an instance with the specified port. + * + * This method MUST retain the state of the current instance, and return + * an instance that contains the specified port. + * + * Implementations MUST raise an exception for ports outside the + * established TCP and UDP port ranges. + * + * A null value provided for the port is equivalent to removing the port + * information. + * + * @param null|int $port The port to use with the new instance; a null value + * removes the port information. + * @return static A new instance with the specified port. + * @throws \InvalidArgumentException for invalid ports. + */ + public function withPort($port); + + /** + * Return an instance with the specified path. + * + * This method MUST retain the state of the current instance, and return + * an instance that contains the specified path. + * + * The path can either be empty or absolute (starting with a slash) or + * rootless (not starting with a slash). Implementations MUST support all + * three syntaxes. + * + * If the path is intended to be domain-relative rather than path relative then + * it must begin with a slash ("/"). Paths not starting with a slash ("/") + * are assumed to be relative to some base path known to the application or + * consumer. + * + * Users can provide both encoded and decoded path characters. + * Implementations ensure the correct encoding as outlined in getPath(). + * + * @param string $path The path to use with the new instance. + * @return static A new instance with the specified path. + * @throws \InvalidArgumentException for invalid paths. + */ + public function withPath($path); + + /** + * Return an instance with the specified query string. + * + * This method MUST retain the state of the current instance, and return + * an instance that contains the specified query string. + * + * Users can provide both encoded and decoded query characters. + * Implementations ensure the correct encoding as outlined in getQuery(). + * + * An empty query string value is equivalent to removing the query string. + * + * @param string $query The query string to use with the new instance. + * @return static A new instance with the specified query string. + * @throws \InvalidArgumentException for invalid query strings. + */ + public function withQuery($query); + + /** + * Return an instance with the specified URI fragment. + * + * This method MUST retain the state of the current instance, and return + * an instance that contains the specified URI fragment. + * + * Users can provide both encoded and decoded fragment characters. + * Implementations ensure the correct encoding as outlined in getFragment(). + * + * An empty fragment value is equivalent to removing the fragment. + * + * @param string $fragment The fragment to use with the new instance. + * @return static A new instance with the specified fragment. + */ + public function withFragment($fragment); + + /** + * Return the string representation as a URI reference. + * + * Depending on which components of the URI are present, the resulting + * string is either a full URI or relative reference according to RFC 3986, + * Section 4.1. The method concatenates the various components of the URI, + * using the appropriate delimiters: + * + * - If a scheme is present, it MUST be suffixed by ":". + * - If an authority is present, it MUST be prefixed by "//". + * - The path can be concatenated without delimiters. But there are two + * cases where the path has to be adjusted to make the URI reference + * valid as PHP does not allow to throw an exception in __toString(): + * - If the path is rootless and an authority is present, the path MUST + * be prefixed by "/". + * - If the path is starting with more than one "/" and no authority is + * present, the starting slashes MUST be reduced to one. + * - If a query is present, it MUST be prefixed by "?". + * - If a fragment is present, it MUST be prefixed by "#". + * + * @see http://tools.ietf.org/html/rfc3986#section-4.1 + * @return string + */ + public function __toString(); +} diff --git a/vendor/psr/log/.gitignore b/vendor/psr/log/.gitignore new file mode 100644 index 00000000..9cbe7ba3 --- /dev/null +++ b/vendor/psr/log/.gitignore @@ -0,0 +1 @@ +vendor diff --git a/vendor/psr/log/LICENSE b/vendor/psr/log/LICENSE new file mode 100644 index 00000000..8a71cf7b --- /dev/null +++ b/vendor/psr/log/LICENSE @@ -0,0 +1,19 @@ +Copyright (c) 2012 PHP Framework Interoperability Group + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +THE SOFTWARE. diff --git a/vendor/psr/log/Psr/Log/AbstractLogger.php b/vendor/psr/log/Psr/Log/AbstractLogger.php new file mode 100644 index 00000000..e33e75aa --- /dev/null +++ b/vendor/psr/log/Psr/Log/AbstractLogger.php @@ -0,0 +1,128 @@ +log(LogLevel::EMERGENCY, $message, $context); + } + + /** + * Action must be taken immediately. + * + * Example: Entire website down, database unavailable, etc. This should + * trigger the SMS alerts and wake you up. + * + * @param string $message + * @param array $context + * + * @return void + */ + public function alert($message, array $context = array()) + { + $this->log(LogLevel::ALERT, $message, $context); + } + + /** + * Critical conditions. + * + * Example: Application component unavailable, unexpected exception. + * + * @param string $message + * @param array $context + * + * @return void + */ + public function critical($message, array $context = array()) + { + $this->log(LogLevel::CRITICAL, $message, $context); + } + + /** + * Runtime errors that do not require immediate action but should typically + * be logged and monitored. + * + * @param string $message + * @param array $context + * + * @return void + */ + public function error($message, array $context = array()) + { + $this->log(LogLevel::ERROR, $message, $context); + } + + /** + * Exceptional occurrences that are not errors. + * + * Example: Use of deprecated APIs, poor use of an API, undesirable things + * that are not necessarily wrong. + * + * @param string $message + * @param array $context + * + * @return void + */ + public function warning($message, array $context = array()) + { + $this->log(LogLevel::WARNING, $message, $context); + } + + /** + * Normal but significant events. + * + * @param string $message + * @param array $context + * + * @return void + */ + public function notice($message, array $context = array()) + { + $this->log(LogLevel::NOTICE, $message, $context); + } + + /** + * Interesting events. + * + * Example: User logs in, SQL logs. + * + * @param string $message + * @param array $context + * + * @return void + */ + public function info($message, array $context = array()) + { + $this->log(LogLevel::INFO, $message, $context); + } + + /** + * Detailed debug information. + * + * @param string $message + * @param array $context + * + * @return void + */ + public function debug($message, array $context = array()) + { + $this->log(LogLevel::DEBUG, $message, $context); + } +} diff --git a/vendor/psr/log/Psr/Log/InvalidArgumentException.php b/vendor/psr/log/Psr/Log/InvalidArgumentException.php new file mode 100644 index 00000000..8e76d230 --- /dev/null +++ b/vendor/psr/log/Psr/Log/InvalidArgumentException.php @@ -0,0 +1,7 @@ +logger = $logger; + } +} diff --git a/vendor/psr/log/Psr/Log/LoggerInterface.php b/vendor/psr/log/Psr/Log/LoggerInterface.php new file mode 100644 index 00000000..95f5fee1 --- /dev/null +++ b/vendor/psr/log/Psr/Log/LoggerInterface.php @@ -0,0 +1,125 @@ +log(LogLevel::EMERGENCY, $message, $context); + } + + /** + * Action must be taken immediately. + * + * Example: Entire website down, database unavailable, etc. This should + * trigger the SMS alerts and wake you up. + * + * @param string $message + * @param array $context + * + * @return void + */ + public function alert($message, array $context = array()) + { + $this->log(LogLevel::ALERT, $message, $context); + } + + /** + * Critical conditions. + * + * Example: Application component unavailable, unexpected exception. + * + * @param string $message + * @param array $context + * + * @return void + */ + public function critical($message, array $context = array()) + { + $this->log(LogLevel::CRITICAL, $message, $context); + } + + /** + * Runtime errors that do not require immediate action but should typically + * be logged and monitored. + * + * @param string $message + * @param array $context + * + * @return void + */ + public function error($message, array $context = array()) + { + $this->log(LogLevel::ERROR, $message, $context); + } + + /** + * Exceptional occurrences that are not errors. + * + * Example: Use of deprecated APIs, poor use of an API, undesirable things + * that are not necessarily wrong. + * + * @param string $message + * @param array $context + * + * @return void + */ + public function warning($message, array $context = array()) + { + $this->log(LogLevel::WARNING, $message, $context); + } + + /** + * Normal but significant events. + * + * @param string $message + * @param array $context + * + * @return void + */ + public function notice($message, array $context = array()) + { + $this->log(LogLevel::NOTICE, $message, $context); + } + + /** + * Interesting events. + * + * Example: User logs in, SQL logs. + * + * @param string $message + * @param array $context + * + * @return void + */ + public function info($message, array $context = array()) + { + $this->log(LogLevel::INFO, $message, $context); + } + + /** + * Detailed debug information. + * + * @param string $message + * @param array $context + * + * @return void + */ + public function debug($message, array $context = array()) + { + $this->log(LogLevel::DEBUG, $message, $context); + } + + /** + * Logs with an arbitrary level. + * + * @param mixed $level + * @param string $message + * @param array $context + * + * @return void + * + * @throws \Psr\Log\InvalidArgumentException + */ + abstract public function log($level, $message, array $context = array()); +} diff --git a/vendor/psr/log/Psr/Log/NullLogger.php b/vendor/psr/log/Psr/Log/NullLogger.php new file mode 100644 index 00000000..34347cd5 --- /dev/null +++ b/vendor/psr/log/Psr/Log/NullLogger.php @@ -0,0 +1,30 @@ +logger) { }` + * blocks. + */ +class NullLogger extends AbstractLogger +{ + /** + * Logs with an arbitrary level. + * + * @param mixed $level + * @param string $message + * @param array $context + * + * @return void + * + * @throws \Psr\Log\InvalidArgumentException + */ + public function log($level, $message, array $context = array()) + { + // noop + } +} diff --git a/vendor/psr/log/Psr/Log/Test/LoggerInterfaceTest.php b/vendor/psr/log/Psr/Log/Test/LoggerInterfaceTest.php new file mode 100644 index 00000000..b9a462c2 --- /dev/null +++ b/vendor/psr/log/Psr/Log/Test/LoggerInterfaceTest.php @@ -0,0 +1,146 @@ + ". + * + * Example ->error('Foo') would yield "error Foo". + * + * @return string[] + */ + abstract public function getLogs(); + + public function testImplements() + { + $this->assertInstanceOf('Psr\Log\LoggerInterface', $this->getLogger()); + } + + /** + * @dataProvider provideLevelsAndMessages + */ + public function testLogsAtAllLevels($level, $message) + { + $logger = $this->getLogger(); + $logger->{$level}($message, array('user' => 'Bob')); + $logger->log($level, $message, array('user' => 'Bob')); + + $expected = array( + $level.' message of level '.$level.' with context: Bob', + $level.' message of level '.$level.' with context: Bob', + ); + $this->assertEquals($expected, $this->getLogs()); + } + + public function provideLevelsAndMessages() + { + return array( + LogLevel::EMERGENCY => array(LogLevel::EMERGENCY, 'message of level emergency with context: {user}'), + LogLevel::ALERT => array(LogLevel::ALERT, 'message of level alert with context: {user}'), + LogLevel::CRITICAL => array(LogLevel::CRITICAL, 'message of level critical with context: {user}'), + LogLevel::ERROR => array(LogLevel::ERROR, 'message of level error with context: {user}'), + LogLevel::WARNING => array(LogLevel::WARNING, 'message of level warning with context: {user}'), + LogLevel::NOTICE => array(LogLevel::NOTICE, 'message of level notice with context: {user}'), + LogLevel::INFO => array(LogLevel::INFO, 'message of level info with context: {user}'), + LogLevel::DEBUG => array(LogLevel::DEBUG, 'message of level debug with context: {user}'), + ); + } + + /** + * @expectedException \Psr\Log\InvalidArgumentException + */ + public function testThrowsOnInvalidLevel() + { + $logger = $this->getLogger(); + $logger->log('invalid level', 'Foo'); + } + + public function testContextReplacement() + { + $logger = $this->getLogger(); + $logger->info('{Message {nothing} {user} {foo.bar} a}', array('user' => 'Bob', 'foo.bar' => 'Bar')); + + $expected = array('info {Message {nothing} Bob Bar a}'); + $this->assertEquals($expected, $this->getLogs()); + } + + public function testObjectCastToString() + { + if (method_exists($this, 'createPartialMock')) { + $dummy = $this->createPartialMock('Psr\Log\Test\DummyTest', array('__toString')); + } else { + $dummy = $this->getMock('Psr\Log\Test\DummyTest', array('__toString')); + } + $dummy->expects($this->once()) + ->method('__toString') + ->will($this->returnValue('DUMMY')); + + $this->getLogger()->warning($dummy); + + $expected = array('warning DUMMY'); + $this->assertEquals($expected, $this->getLogs()); + } + + public function testContextCanContainAnything() + { + $closed = fopen('php://memory', 'r'); + fclose($closed); + + $context = array( + 'bool' => true, + 'null' => null, + 'string' => 'Foo', + 'int' => 0, + 'float' => 0.5, + 'nested' => array('with object' => new DummyTest), + 'object' => new \DateTime, + 'resource' => fopen('php://memory', 'r'), + 'closed' => $closed, + ); + + $this->getLogger()->warning('Crazy context data', $context); + + $expected = array('warning Crazy context data'); + $this->assertEquals($expected, $this->getLogs()); + } + + public function testContextExceptionKeyCanBeExceptionOrOtherValues() + { + $logger = $this->getLogger(); + $logger->warning('Random message', array('exception' => 'oops')); + $logger->critical('Uncaught Exception!', array('exception' => new \LogicException('Fail'))); + + $expected = array( + 'warning Random message', + 'critical Uncaught Exception!' + ); + $this->assertEquals($expected, $this->getLogs()); + } +} + +class DummyTest +{ + public function __toString() + { + return 'DummyTest'; + } +} diff --git a/vendor/psr/log/Psr/Log/Test/TestLogger.php b/vendor/psr/log/Psr/Log/Test/TestLogger.php new file mode 100644 index 00000000..0a108f48 --- /dev/null +++ b/vendor/psr/log/Psr/Log/Test/TestLogger.php @@ -0,0 +1,147 @@ + $level, + 'message' => $message, + 'context' => $context, + ]; + + $this->recordsByLevel[$record['level']][] = $record; + $this->records[] = $record; + } + + public function hasRecords($level) + { + return isset($this->recordsByLevel[$level]); + } + + public function hasRecord($record, $level) + { + if (is_string($record)) { + $record = ['message' => $record]; + } + return $this->hasRecordThatPasses(function ($rec) use ($record) { + if ($rec['message'] !== $record['message']) { + return false; + } + if (isset($record['context']) && $rec['context'] !== $record['context']) { + return false; + } + return true; + }, $level); + } + + public function hasRecordThatContains($message, $level) + { + return $this->hasRecordThatPasses(function ($rec) use ($message) { + return strpos($rec['message'], $message) !== false; + }, $level); + } + + public function hasRecordThatMatches($regex, $level) + { + return $this->hasRecordThatPasses(function ($rec) use ($regex) { + return preg_match($regex, $rec['message']) > 0; + }, $level); + } + + public function hasRecordThatPasses(callable $predicate, $level) + { + if (!isset($this->recordsByLevel[$level])) { + return false; + } + foreach ($this->recordsByLevel[$level] as $i => $rec) { + if (call_user_func($predicate, $rec, $i)) { + return true; + } + } + return false; + } + + public function __call($method, $args) + { + if (preg_match('/(.*)(Debug|Info|Notice|Warning|Error|Critical|Alert|Emergency)(.*)/', $method, $matches) > 0) { + $genericMethod = $matches[1] . ('Records' !== $matches[3] ? 'Record' : '') . $matches[3]; + $level = strtolower($matches[2]); + if (method_exists($this, $genericMethod)) { + $args[] = $level; + return call_user_func_array([$this, $genericMethod], $args); + } + } + throw new \BadMethodCallException('Call to undefined method ' . get_class($this) . '::' . $method . '()'); + } + + public function reset() + { + $this->records = []; + $this->recordsByLevel = []; + } +} diff --git a/vendor/psr/log/README.md b/vendor/psr/log/README.md new file mode 100644 index 00000000..edbc9176 --- /dev/null +++ b/vendor/psr/log/README.md @@ -0,0 +1,58 @@ +PSR Log +======= + +This repository holds all interfaces/classes/traits related to +[PSR-3](https://github.com/php-fig/fig-standards/blob/master/accepted/PSR-3-logger-interface.md). + +Note that this is not a logger of its own. It is merely an interface that +describes a logger. See the specification for more details. + +Installation +------------ + +```bash +composer require psr/log +``` + +Usage +----- + +If you need a logger, you can use the interface like this: + +```php +logger = $logger; + } + + public function doSomething() + { + if ($this->logger) { + $this->logger->info('Doing work'); + } + + try { + $this->doSomethingElse(); + } catch (Exception $exception) { + $this->logger->error('Oh no!', array('exception' => $exception)); + } + + // do something useful + } +} +``` + +You can then pick one of the implementations of the interface to get a logger. + +If you want to implement the interface, you can require this package and +implement `Psr\Log\LoggerInterface` in your code. Please read the +[specification text](https://github.com/php-fig/fig-standards/blob/master/accepted/PSR-3-logger-interface.md) +for details. diff --git a/vendor/psr/log/composer.json b/vendor/psr/log/composer.json new file mode 100644 index 00000000..f1f0850a --- /dev/null +++ b/vendor/psr/log/composer.json @@ -0,0 +1,26 @@ +{ + "name": "psr/log", + "description": "Common interface for logging libraries", + "keywords": ["psr", "psr-3", "log"], + "homepage": "https://github.com/php-fig/log", + "license": "MIT", + "authors": [ + { + "name": "PHP-FIG", + "homepage": "http://www.php-fig.org/" + } + ], + "require": { + "php": ">=5.3.0" + }, + "autoload": { + "psr-4": { + "Psr\\Log\\": "Psr/Log/" + } + }, + "extra": { + "branch-alias": { + "dev-master": "1.1.x-dev" + } + } +} diff --git a/vendor/ralouphie/getallheaders/LICENSE b/vendor/ralouphie/getallheaders/LICENSE new file mode 100644 index 00000000..634d3738 --- /dev/null +++ b/vendor/ralouphie/getallheaders/LICENSE @@ -0,0 +1,21 @@ +The MIT License (MIT) + +Copyright (c) 2014 Ralph Khattar + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. diff --git a/vendor/ralouphie/getallheaders/README.md b/vendor/ralouphie/getallheaders/README.md new file mode 100644 index 00000000..1501cf78 --- /dev/null +++ b/vendor/ralouphie/getallheaders/README.md @@ -0,0 +1,27 @@ +getallheaders +============= + +PHP `getallheaders()` polyfill. Compatible with PHP >= 5.3. + +[![Build Status](https://travis-ci.org/ralouphie/getallheaders.svg?branch=master)](https://travis-ci.org/ralouphie/getallheaders) +[![Coverage Status](https://coveralls.io/repos/ralouphie/getallheaders/badge.png?branch=master)](https://coveralls.io/r/ralouphie/getallheaders?branch=master) +[![Latest Stable Version](https://poser.pugx.org/ralouphie/getallheaders/v/stable.png)](https://packagist.org/packages/ralouphie/getallheaders) +[![Latest Unstable Version](https://poser.pugx.org/ralouphie/getallheaders/v/unstable.png)](https://packagist.org/packages/ralouphie/getallheaders) +[![License](https://poser.pugx.org/ralouphie/getallheaders/license.png)](https://packagist.org/packages/ralouphie/getallheaders) + + +This is a simple polyfill for [`getallheaders()`](http://www.php.net/manual/en/function.getallheaders.php). + +## Install + +For PHP version **`>= 5.6`**: + +``` +composer require ralouphie/getallheaders +``` + +For PHP version **`< 5.6`**: + +``` +composer require ralouphie/getallheaders "^2" +``` diff --git a/vendor/ralouphie/getallheaders/composer.json b/vendor/ralouphie/getallheaders/composer.json new file mode 100644 index 00000000..f6021c21 --- /dev/null +++ b/vendor/ralouphie/getallheaders/composer.json @@ -0,0 +1,26 @@ +{ + "name": "ralouphie/getallheaders", + "description": "A polyfill for getallheaders.", + "license": "MIT", + "authors": [ + { + "name": "Ralph Khattar", + "email": "ralph.khattar@gmail.com" + } + ], + "require": { + "php": ">=5.6" + }, + "require-dev": { + "phpunit/phpunit": "^5 || ^6.5", + "php-coveralls/php-coveralls": "^2.1" + }, + "autoload": { + "files": ["src/getallheaders.php"] + }, + "autoload-dev": { + "psr-4": { + "getallheaders\\Tests\\": "tests/" + } + } +} diff --git a/vendor/ralouphie/getallheaders/src/getallheaders.php b/vendor/ralouphie/getallheaders/src/getallheaders.php new file mode 100644 index 00000000..7095ef60 --- /dev/null +++ b/vendor/ralouphie/getallheaders/src/getallheaders.php @@ -0,0 +1,46 @@ + 'Content-Type', + 'CONTENT_LENGTH' => 'Content-Length', + 'CONTENT_MD5' => 'Content-Md5', + ); + + foreach ($_SERVER as $key => $value) { + if (substr($key, 0, 5) === 'HTTP_') { + $key = substr($key, 5); + if (!isset($copy_server[$key]) || !isset($_SERVER[$key])) { + $key = str_replace(' ', '-', ucwords(strtolower(str_replace('_', ' ', $key)))); + $headers[$key] = $value; + } + } elseif (isset($copy_server[$key])) { + $headers[$copy_server[$key]] = $value; + } + } + + if (!isset($headers['Authorization'])) { + if (isset($_SERVER['REDIRECT_HTTP_AUTHORIZATION'])) { + $headers['Authorization'] = $_SERVER['REDIRECT_HTTP_AUTHORIZATION']; + } elseif (isset($_SERVER['PHP_AUTH_USER'])) { + $basic_pass = isset($_SERVER['PHP_AUTH_PW']) ? $_SERVER['PHP_AUTH_PW'] : ''; + $headers['Authorization'] = 'Basic ' . base64_encode($_SERVER['PHP_AUTH_USER'] . ':' . $basic_pass); + } elseif (isset($_SERVER['PHP_AUTH_DIGEST'])) { + $headers['Authorization'] = $_SERVER['PHP_AUTH_DIGEST']; + } + } + + return $headers; + } + +} diff --git a/vendor/symfony/polyfill-ctype/Ctype.php b/vendor/symfony/polyfill-ctype/Ctype.php new file mode 100644 index 00000000..3232dca7 --- /dev/null +++ b/vendor/symfony/polyfill-ctype/Ctype.php @@ -0,0 +1,227 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +namespace Symfony\Polyfill\Ctype; + +/** + * Ctype implementation through regex. + * + * @internal + * + * @author Gert de Pagter + */ +final class Ctype +{ + /** + * Returns TRUE if every character in text is either a letter or a digit, FALSE otherwise. + * + * @see https://php.net/ctype-alnum + * + * @param string|int $text + * + * @return bool + */ + public static function ctype_alnum($text) + { + $text = self::convert_int_to_char_for_ctype($text); + + return \is_string($text) && '' !== $text && !preg_match('/[^A-Za-z0-9]/', $text); + } + + /** + * Returns TRUE if every character in text is a letter, FALSE otherwise. + * + * @see https://php.net/ctype-alpha + * + * @param string|int $text + * + * @return bool + */ + public static function ctype_alpha($text) + { + $text = self::convert_int_to_char_for_ctype($text); + + return \is_string($text) && '' !== $text && !preg_match('/[^A-Za-z]/', $text); + } + + /** + * Returns TRUE if every character in text is a control character from the current locale, FALSE otherwise. + * + * @see https://php.net/ctype-cntrl + * + * @param string|int $text + * + * @return bool + */ + public static function ctype_cntrl($text) + { + $text = self::convert_int_to_char_for_ctype($text); + + return \is_string($text) && '' !== $text && !preg_match('/[^\x00-\x1f\x7f]/', $text); + } + + /** + * Returns TRUE if every character in the string text is a decimal digit, FALSE otherwise. + * + * @see https://php.net/ctype-digit + * + * @param string|int $text + * + * @return bool + */ + public static function ctype_digit($text) + { + $text = self::convert_int_to_char_for_ctype($text); + + return \is_string($text) && '' !== $text && !preg_match('/[^0-9]/', $text); + } + + /** + * Returns TRUE if every character in text is printable and actually creates visible output (no white space), FALSE otherwise. + * + * @see https://php.net/ctype-graph + * + * @param string|int $text + * + * @return bool + */ + public static function ctype_graph($text) + { + $text = self::convert_int_to_char_for_ctype($text); + + return \is_string($text) && '' !== $text && !preg_match('/[^!-~]/', $text); + } + + /** + * Returns TRUE if every character in text is a lowercase letter. + * + * @see https://php.net/ctype-lower + * + * @param string|int $text + * + * @return bool + */ + public static function ctype_lower($text) + { + $text = self::convert_int_to_char_for_ctype($text); + + return \is_string($text) && '' !== $text && !preg_match('/[^a-z]/', $text); + } + + /** + * Returns TRUE if every character in text will actually create output (including blanks). Returns FALSE if text contains control characters or characters that do not have any output or control function at all. + * + * @see https://php.net/ctype-print + * + * @param string|int $text + * + * @return bool + */ + public static function ctype_print($text) + { + $text = self::convert_int_to_char_for_ctype($text); + + return \is_string($text) && '' !== $text && !preg_match('/[^ -~]/', $text); + } + + /** + * Returns TRUE if every character in text is printable, but neither letter, digit or blank, FALSE otherwise. + * + * @see https://php.net/ctype-punct + * + * @param string|int $text + * + * @return bool + */ + public static function ctype_punct($text) + { + $text = self::convert_int_to_char_for_ctype($text); + + return \is_string($text) && '' !== $text && !preg_match('/[^!-\/\:-@\[-`\{-~]/', $text); + } + + /** + * Returns TRUE if every character in text creates some sort of white space, FALSE otherwise. Besides the blank character this also includes tab, vertical tab, line feed, carriage return and form feed characters. + * + * @see https://php.net/ctype-space + * + * @param string|int $text + * + * @return bool + */ + public static function ctype_space($text) + { + $text = self::convert_int_to_char_for_ctype($text); + + return \is_string($text) && '' !== $text && !preg_match('/[^\s]/', $text); + } + + /** + * Returns TRUE if every character in text is an uppercase letter. + * + * @see https://php.net/ctype-upper + * + * @param string|int $text + * + * @return bool + */ + public static function ctype_upper($text) + { + $text = self::convert_int_to_char_for_ctype($text); + + return \is_string($text) && '' !== $text && !preg_match('/[^A-Z]/', $text); + } + + /** + * Returns TRUE if every character in text is a hexadecimal 'digit', that is a decimal digit or a character from [A-Fa-f] , FALSE otherwise. + * + * @see https://php.net/ctype-xdigit + * + * @param string|int $text + * + * @return bool + */ + public static function ctype_xdigit($text) + { + $text = self::convert_int_to_char_for_ctype($text); + + return \is_string($text) && '' !== $text && !preg_match('/[^A-Fa-f0-9]/', $text); + } + + /** + * Converts integers to their char versions according to normal ctype behaviour, if needed. + * + * If an integer between -128 and 255 inclusive is provided, + * it is interpreted as the ASCII value of a single character + * (negative values have 256 added in order to allow characters in the Extended ASCII range). + * Any other integer is interpreted as a string containing the decimal digits of the integer. + * + * @param string|int $int + * + * @return mixed + */ + private static function convert_int_to_char_for_ctype($int) + { + if (!\is_int($int)) { + return $int; + } + + if ($int < -128 || $int > 255) { + return (string) $int; + } + + if ($int < 0) { + $int += 256; + } + + return \chr($int); + } +} diff --git a/vendor/symfony/polyfill-ctype/LICENSE b/vendor/symfony/polyfill-ctype/LICENSE new file mode 100644 index 00000000..24807a66 --- /dev/null +++ b/vendor/symfony/polyfill-ctype/LICENSE @@ -0,0 +1,19 @@ +Copyright (c) 2018-2019 Fabien Potencier + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is furnished +to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +THE SOFTWARE. diff --git a/vendor/symfony/polyfill-ctype/README.md b/vendor/symfony/polyfill-ctype/README.md new file mode 100644 index 00000000..ba8fbea5 --- /dev/null +++ b/vendor/symfony/polyfill-ctype/README.md @@ -0,0 +1,12 @@ +Symfony Polyfill / Ctype +======================== + +This component provides `ctype_*` functions to users who run php versions without the ctype extension. + +More information can be found in the +[main Polyfill README](https://github.com/symfony/polyfill/blob/master/README.md). + +License +======= + +This library is released under the [MIT license](LICENSE). diff --git a/vendor/symfony/polyfill-ctype/bootstrap.php b/vendor/symfony/polyfill-ctype/bootstrap.php new file mode 100644 index 00000000..5e91dbd2 --- /dev/null +++ b/vendor/symfony/polyfill-ctype/bootstrap.php @@ -0,0 +1,26 @@ + + * + * For the full copyright and license information, please view the LICENSE + * file that was distributed with this source code. + */ + +use Symfony\Polyfill\Ctype as p; + +if (!function_exists('ctype_alnum')) { + function ctype_alnum($text) { return p\Ctype::ctype_alnum($text); } + function ctype_alpha($text) { return p\Ctype::ctype_alpha($text); } + function ctype_cntrl($text) { return p\Ctype::ctype_cntrl($text); } + function ctype_digit($text) { return p\Ctype::ctype_digit($text); } + function ctype_graph($text) { return p\Ctype::ctype_graph($text); } + function ctype_lower($text) { return p\Ctype::ctype_lower($text); } + function ctype_print($text) { return p\Ctype::ctype_print($text); } + function ctype_punct($text) { return p\Ctype::ctype_punct($text); } + function ctype_space($text) { return p\Ctype::ctype_space($text); } + function ctype_upper($text) { return p\Ctype::ctype_upper($text); } + function ctype_xdigit($text) { return p\Ctype::ctype_xdigit($text); } +} diff --git a/vendor/symfony/polyfill-ctype/composer.json b/vendor/symfony/polyfill-ctype/composer.json new file mode 100644 index 00000000..04ba5894 --- /dev/null +++ b/vendor/symfony/polyfill-ctype/composer.json @@ -0,0 +1,34 @@ +{ + "name": "symfony/polyfill-ctype", + "type": "library", + "description": "Symfony polyfill for ctype functions", + "keywords": ["polyfill", "compatibility", "portable", "ctype"], + "homepage": "https://symfony.com", + "license": "MIT", + "authors": [ + { + "name": "Gert de Pagter", + "email": "BackEndTea@gmail.com" + }, + { + "name": "Symfony Community", + "homepage": "https://symfony.com/contributors" + } + ], + "require": { + "php": ">=5.3.3" + }, + "autoload": { + "psr-4": { "Symfony\\Polyfill\\Ctype\\": "" }, + "files": [ "bootstrap.php" ] + }, + "suggest": { + "ext-ctype": "For best performance" + }, + "minimum-stability": "dev", + "extra": { + "branch-alias": { + "dev-master": "1.13-dev" + } + } +} diff --git a/vendor/vlucas/phpdotenv/LICENSE b/vendor/vlucas/phpdotenv/LICENSE new file mode 100644 index 00000000..f41fa72e --- /dev/null +++ b/vendor/vlucas/phpdotenv/LICENSE @@ -0,0 +1,30 @@ +BSD 3-Clause License + +Copyright (c) 2014, Graham Campbell. +Copyright (c) 2013, Vance Lucas. +All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + +1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + +2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + +3. Neither the name of the copyright holder nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. diff --git a/vendor/vlucas/phpdotenv/composer.json b/vendor/vlucas/phpdotenv/composer.json new file mode 100644 index 00000000..80f85dc8 --- /dev/null +++ b/vendor/vlucas/phpdotenv/composer.json @@ -0,0 +1,36 @@ +{ + "name": "vlucas/phpdotenv", + "description": "Loads environment variables from `.env` to `getenv()`, `$_ENV` and `$_SERVER` automagically.", + "keywords": ["env", "dotenv", "environment"], + "license" : "BSD-3-Clause", + "authors" : [ + { + "name": "Graham Campbell", + "email": "graham@alt-three.com", + "homepage": "https://gjcampbell.co.uk/" + }, + { + "name": "Vance Lucas", + "email": "vance@vancelucas.com", + "homepage": "https://vancelucas.com/" + } + ], + "require": { + "php": "^5.4 || ^7.0", + "phpoption/phpoption": "^1.5", + "symfony/polyfill-ctype": "^1.9" + }, + "require-dev": { + "phpunit/phpunit": "^4.8.35 || ^5.0 || ^6.0 || ^7.0" + }, + "autoload": { + "psr-4": { + "Dotenv\\": "src/" + } + }, + "extra": { + "branch-alias": { + "dev-master": "3.6-dev" + } + } +} diff --git a/vendor/vlucas/phpdotenv/src/Dotenv.php b/vendor/vlucas/phpdotenv/src/Dotenv.php new file mode 100644 index 00000000..a7fc4787 --- /dev/null +++ b/vendor/vlucas/phpdotenv/src/Dotenv.php @@ -0,0 +1,159 @@ +loader = $loader; + } + + /** + * Create a new dotenv instance. + * + * @param string|string[] $paths + * @param string|null $file + * @param \Dotenv\Environment\FactoryInterface|null $envFactory + * + * @return \Dotenv\Dotenv + */ + public static function create($paths, $file = null, FactoryInterface $envFactory = null) + { + $loader = new Loader( + self::getFilePaths((array) $paths, $file ?: '.env'), + $envFactory ?: new DotenvFactory(), + true + ); + + return new self($loader); + } + + /** + * Returns the full paths to the files. + * + * @param string[] $paths + * @param string $file + * + * @return string[] + */ + private static function getFilePaths(array $paths, $file) + { + return array_map(function ($path) use ($file) { + return rtrim($path, DIRECTORY_SEPARATOR).DIRECTORY_SEPARATOR.$file; + }, $paths); + } + + /** + * Load environment file in given directory. + * + * @throws \Dotenv\Exception\InvalidPathException|\Dotenv\Exception\InvalidFileException + * + * @return array + */ + public function load() + { + return $this->loadData(); + } + + /** + * Load environment file in given directory, silently failing if it doesn't exist. + * + * @throws \Dotenv\Exception\InvalidFileException + * + * @return array + */ + public function safeLoad() + { + try { + return $this->loadData(); + } catch (InvalidPathException $e) { + // suppressing exception + return []; + } + } + + /** + * Load environment file in given directory. + * + * @throws \Dotenv\Exception\InvalidPathException|\Dotenv\Exception\InvalidFileException + * + * @return array + */ + public function overload() + { + return $this->loadData(true); + } + + /** + * Actually load the data. + * + * @param bool $overload + * + * @throws \Dotenv\Exception\InvalidPathException|\Dotenv\Exception\InvalidFileException + * + * @return array + */ + protected function loadData($overload = false) + { + return $this->loader->setImmutable(!$overload)->load(); + } + + /** + * Required ensures that the specified variables exist, and returns a new validator object. + * + * @param string|string[] $variables + * + * @return \Dotenv\Validator + */ + public function required($variables) + { + return new Validator((array) $variables, $this->loader); + } + + /** + * Returns a new validator object that won't check if the specified variables exist. + * + * @param string|string[] $variables + * + * @return \Dotenv\Validator + */ + public function ifPresent($variables) + { + return new Validator((array) $variables, $this->loader, false); + } + + /** + * Get the list of environment variables declared inside the 'env' file. + * + * @return string[] + */ + public function getEnvironmentVariableNames() + { + return $this->loader->getEnvironmentVariableNames(); + } +} diff --git a/vendor/vlucas/phpdotenv/src/Environment/AbstractVariables.php b/vendor/vlucas/phpdotenv/src/Environment/AbstractVariables.php new file mode 100644 index 00000000..2775f3ff --- /dev/null +++ b/vendor/vlucas/phpdotenv/src/Environment/AbstractVariables.php @@ -0,0 +1,190 @@ +immutable = $immutable; + $this->loaded = new ArrayAdapter(); + } + + /** + * Get an environment variable. + * + * @param string $name + * + * @throws \InvalidArgumentException + * + * @return string|null + */ + public function get($name) + { + if (!is_string($name)) { + throw new InvalidArgumentException('Expected name to be a string.'); + } + + return $this->getInternal($name); + } + + /** + * Get an environment variable. + * + * @param string $name + * + * @return string|null + */ + protected abstract function getInternal($name); + + /** + * Set an environment variable. + * + * @param string $name + * @param string|null $value + * + * @throws \InvalidArgumentException + * + * @return void + */ + public function set($name, $value = null) + { + if (!is_string($name)) { + throw new InvalidArgumentException('Expected name to be a string.'); + } + + // Don't overwrite existing environment variables if we're immutable + // Ruby's dotenv does this with `ENV[key] ||= value`. + if ($this->isImmutable() && $this->get($name) !== null && $this->loaded->get($name)->isEmpty()) { + return; + } + + $this->setInternal($name, $value); + $this->loaded->set($name, ''); + } + + /** + * Set an environment variable. + * + * @param string $name + * @param string|null $value + * + * @return void + */ + protected abstract function setInternal($name, $value = null); + + /** + * Clear an environment variable. + * + * @param string $name + * + * @throws \InvalidArgumentException + * + * @return void + */ + public function clear($name) + { + if (!is_string($name)) { + throw new InvalidArgumentException('Expected name to be a string.'); + } + + // Don't clear anything if we're immutable. + if ($this->isImmutable()) { + return; + } + + $this->clearInternal($name); + } + + /** + * Clear an environment variable. + * + * @param string $name + * + * @return void + */ + protected abstract function clearInternal($name); + + /** + * Determine if the environment is immutable. + * + * @return bool + */ + public function isImmutable() + { + return $this->immutable; + } + + /** + * Tells whether environment variable has been defined. + * + * @param string $name + * + * @return bool + */ + public function has($name) + { + return is_string($name) && $this->get($name) !== null; + } + + /** + * {@inheritdoc} + */ + public function offsetExists($offset) + { + return $this->has($offset); + } + + /** + * {@inheritdoc} + */ + public function offsetGet($offset) + { + return $this->get($offset); + } + + /** + * {@inheritdoc} + */ + public function offsetSet($offset, $value) + { + $this->set($offset, $value); + } + + /** + * {@inheritdoc} + */ + public function offsetUnset($offset) + { + $this->clear($offset); + } +} diff --git a/vendor/vlucas/phpdotenv/src/Environment/Adapter/AdapterInterface.php b/vendor/vlucas/phpdotenv/src/Environment/Adapter/AdapterInterface.php new file mode 100644 index 00000000..f73261c1 --- /dev/null +++ b/vendor/vlucas/phpdotenv/src/Environment/Adapter/AdapterInterface.php @@ -0,0 +1,41 @@ + + */ + private $variables = []; + + /** + * Determines if the adapter is supported. + * + * @return bool + */ + public function isSupported() + { + return true; + } + + /** + * Get an environment variable, if it exists. + * + * @param string $name + * + * @return \PhpOption\Option + */ + public function get($name) + { + if (array_key_exists($name, $this->variables)) { + return Some::create($this->variables[$name]); + } + + return None::create(); + } + + /** + * Set an environment variable. + * + * @param string $name + * @param string|null $value + * + * @return void + */ + public function set($name, $value = null) + { + $this->variables[$name] = $value; + } + + /** + * Clear an environment variable. + * + * @param string $name + * + * @return void + */ + public function clear($name) + { + unset($this->variables[$name]); + } +} diff --git a/vendor/vlucas/phpdotenv/src/Environment/Adapter/EnvConstAdapter.php b/vendor/vlucas/phpdotenv/src/Environment/Adapter/EnvConstAdapter.php new file mode 100644 index 00000000..3194573b --- /dev/null +++ b/vendor/vlucas/phpdotenv/src/Environment/Adapter/EnvConstAdapter.php @@ -0,0 +1,60 @@ +adapters = array_filter($adapters === null ? [new ApacheAdapter(), new EnvConstAdapter(), new ServerConstAdapter(), new PutenvAdapter()] : $adapters, function (AdapterInterface $adapter) { + return $adapter->isSupported(); + }); + } + + /** + * Creates a new mutable environment variables instance. + * + * @return \Dotenv\Environment\VariablesInterface + */ + public function create() + { + return new DotenvVariables($this->adapters, false); + } + + /** + * Creates a new immutable environment variables instance. + * + * @return \Dotenv\Environment\VariablesInterface + */ + public function createImmutable() + { + return new DotenvVariables($this->adapters, true); + } +} diff --git a/vendor/vlucas/phpdotenv/src/Environment/DotenvVariables.php b/vendor/vlucas/phpdotenv/src/Environment/DotenvVariables.php new file mode 100644 index 00000000..0dd9432f --- /dev/null +++ b/vendor/vlucas/phpdotenv/src/Environment/DotenvVariables.php @@ -0,0 +1,78 @@ +adapters = $adapters; + parent::__construct($immutable); + } + + /** + * Get an environment variable. + * + * We do this by querying our adapters sequentially. + * + * @param string $name + * + * @return string|null + */ + protected function getInternal($name) + { + foreach ($this->adapters as $adapter) { + $result = $adapter->get($name); + if ($result->isDefined()) { + return $result->get(); + } + } + } + + /** + * Set an environment variable. + * + * @param string $name + * @param string|null $value + * + * @return void + */ + protected function setInternal($name, $value = null) + { + foreach ($this->adapters as $adapter) { + $adapter->set($name, $value); + } + } + + /** + * Clear an environment variable. + * + * @param string $name + * + * @return void + */ + protected function clearInternal($name) + { + foreach ($this->adapters as $adapter) { + $adapter->clear($name); + } + } +} diff --git a/vendor/vlucas/phpdotenv/src/Environment/FactoryInterface.php b/vendor/vlucas/phpdotenv/src/Environment/FactoryInterface.php new file mode 100644 index 00000000..ffe7bb76 --- /dev/null +++ b/vendor/vlucas/phpdotenv/src/Environment/FactoryInterface.php @@ -0,0 +1,26 @@ + 1; + } + + /** + * Get all pairs of adjacent characters within the line. + * + * @param string $line + * + * @return bool + */ + private static function getCharPairs($line) + { + $chars = str_split($line); + + return array_map(null, $chars, array_slice($chars, 1)); + } + + /** + * Determine if the line in the file is a comment, e.g. begins with a #. + * + * @param string $line + * + * @return bool + */ + private static function isComment($line) + { + $line = ltrim($line); + + return isset($line[0]) && $line[0] === '#'; + } + + /** + * Determine if the given line looks like it's setting a variable. + * + * @param string $line + * + * @return bool + */ + private static function isSetter($line) + { + return strpos($line, '=') !== false; + } +} diff --git a/vendor/vlucas/phpdotenv/src/Loader.php b/vendor/vlucas/phpdotenv/src/Loader.php new file mode 100644 index 00000000..1b75e197 --- /dev/null +++ b/vendor/vlucas/phpdotenv/src/Loader.php @@ -0,0 +1,255 @@ +filePaths = $filePaths; + $this->envFactory = $envFactory; + $this->setImmutable($immutable); + } + + /** + * Set immutable value. + * + * @param bool $immutable + * + * @return $this + */ + public function setImmutable($immutable = false) + { + $this->envVariables = $immutable + ? $this->envFactory->createImmutable() + : $this->envFactory->create(); + + return $this; + } + + /** + * Load the environment file from disk. + * + * @throws \Dotenv\Exception\InvalidPathException|\Dotenv\Exception\InvalidFileException + * + * @return array + */ + public function load() + { + return $this->loadDirect( + self::findAndRead($this->filePaths) + ); + } + + /** + * Directly load the given string. + * + * @param string $content + * + * @throws \Dotenv\Exception\InvalidFileException + * + * @return array + */ + public function loadDirect($content) + { + return $this->processEntries( + Lines::process(preg_split("/(\r\n|\n|\r)/", $content)) + ); + } + + /** + * Attempt to read the files in order. + * + * @param string[] $filePaths + * + * @throws \Dotenv\Exception\InvalidPathException + * + * @return string[] + */ + private static function findAndRead(array $filePaths) + { + if ($filePaths === []) { + throw new InvalidPathException('At least one environment file path must be provided.'); + } + + foreach ($filePaths as $filePath) { + $lines = self::readFromFile($filePath); + if ($lines->isDefined()) { + return $lines->get(); + } + } + + throw new InvalidPathException( + sprintf('Unable to read any of the environment file(s) at [%s].', implode(', ', $filePaths)) + ); + } + + /** + * Read the given file. + * + * @param string $filePath + * + * @return \PhpOption\Option + */ + private static function readFromFile($filePath) + { + $content = @file_get_contents($filePath); + + return Option::fromValue($content, false); + } + + /** + * Process the environment variable entries. + * + * We'll fill out any nested variables, and acually set the variable using + * the underlying environment variables instance. + * + * @param string[] $entries + * + * @throws \Dotenv\Exception\InvalidFileException + * + * @return array + */ + private function processEntries(array $entries) + { + $vars = []; + + foreach ($entries as $entry) { + list($name, $value) = Parser::parse($entry); + $vars[$name] = $this->resolveNestedVariables($value); + $this->setEnvironmentVariable($name, $vars[$name]); + } + + return $vars; + } + + /** + * Resolve the nested variables. + * + * Look for ${varname} patterns in the variable value and replace with an + * existing environment variable. + * + * @param string|null $value + * + * @return string|null + */ + private function resolveNestedVariables($value = null) + { + return Option::fromValue($value) + ->filter(function ($str) { + return strpos($str, '$') !== false; + }) + ->flatMap(function ($str) { + return Regex::replaceCallback( + '/\${([a-zA-Z0-9_.]+)}/', + function (array $matches) { + return Option::fromValue($this->getEnvironmentVariable($matches[1])) + ->getOrElse($matches[0]); + }, + $str + )->success(); + }) + ->getOrElse($value); + } + + /** + * Search the different places for environment variables and return first value found. + * + * @param string $name + * + * @return string|null + */ + public function getEnvironmentVariable($name) + { + return $this->envVariables->get($name); + } + + /** + * Set an environment variable. + * + * @param string $name + * @param string|null $value + * + * @return void + */ + public function setEnvironmentVariable($name, $value = null) + { + $this->variableNames[] = $name; + $this->envVariables->set($name, $value); + } + + /** + * Clear an environment variable. + * + * This method only expects names in normal form. + * + * @param string $name + * + * @return void + */ + public function clearEnvironmentVariable($name) + { + $this->envVariables->clear($name); + } + + /** + * Get the list of environment variables names. + * + * @return string[] + */ + public function getEnvironmentVariableNames() + { + return $this->variableNames; + } +} diff --git a/vendor/vlucas/phpdotenv/src/Parser.php b/vendor/vlucas/phpdotenv/src/Parser.php new file mode 100644 index 00000000..de31e1be --- /dev/null +++ b/vendor/vlucas/phpdotenv/src/Parser.php @@ -0,0 +1,176 @@ +value = $value; + } + + /** + * Create a new error value. + * + * @param string $value + * + * @return \Dotenv\Regex\Result + */ + public static function create($value) + { + return new self($value); + } + + /** + * Get the success option value. + * + * @return \PhpOption\Option + */ + public function success() + { + return None::create(); + } + + /** + * Map over the success value. + * + * @param callable $f + * + * @return \Dotenv\Regex\Result + */ + public function mapSuccess(callable $f) + { + return self::create($this->value); + } + + /** + * Get the error option value. + * + * @return \PhpOption\Option + */ + public function error() + { + return Some::create($this->value); + } + + /** + * Map over the error value. + * + * @param callable $f + * + * @return \Dotenv\Regex\Result + */ + public function mapError(callable $f) + { + return self::create($f($this->value)); + } +} diff --git a/vendor/vlucas/phpdotenv/src/Regex/Regex.php b/vendor/vlucas/phpdotenv/src/Regex/Regex.php new file mode 100644 index 00000000..903fd8e0 --- /dev/null +++ b/vendor/vlucas/phpdotenv/src/Regex/Regex.php @@ -0,0 +1,100 @@ +filter(function (array $consts) { + return isset($consts['pcre']) && defined('ARRAY_FILTER_USE_KEY'); + }) + ->map(function (array $consts) { + return array_filter($consts['pcre'], function ($msg) { + return substr($msg, -6) === '_ERROR'; + }, ARRAY_FILTER_USE_KEY); + }) + ->flatMap(function (array $errors) use ($code) { + return Option::fromValue( + array_search($code, $errors, true) + ); + }) + ->getOrElse('PREG_ERROR'); + } +} diff --git a/vendor/vlucas/phpdotenv/src/Regex/Result.php b/vendor/vlucas/phpdotenv/src/Regex/Result.php new file mode 100644 index 00000000..9334a7f3 --- /dev/null +++ b/vendor/vlucas/phpdotenv/src/Regex/Result.php @@ -0,0 +1,58 @@ +success()->get(); + } + + /** + * Map over the success value. + * + * @param callable $f + * + * @return \Dotenv\Regex\Result + */ + abstract public function mapSuccess(callable $f); + + /** + * Get the error option value. + * + * @return \PhpOption\Option + */ + abstract public function error(); + + /** + * Get the error value, if possible. + * + * @return string + */ + public function getError() + { + return $this->error()->get(); + } + + /** + * Map over the error value. + * + * @param callable $f + * + * @return \Dotenv\Regex\Result + */ + abstract public function mapError(callable $f); +} diff --git a/vendor/vlucas/phpdotenv/src/Regex/Success.php b/vendor/vlucas/phpdotenv/src/Regex/Success.php new file mode 100644 index 00000000..075f81d7 --- /dev/null +++ b/vendor/vlucas/phpdotenv/src/Regex/Success.php @@ -0,0 +1,82 @@ +value = $value; + } + + /** + * Create a new success value. + * + * @param string|int $value + * + * @return \Dotenv\Regex\Result + */ + public static function create($value) + { + return new self($value); + } + + /** + * Get the success option value. + * + * @return \PhpOption\Option + */ + public function success() + { + return Some::create($this->value); + } + + /** + * Map over the success value. + * + * @param callable $f + * + * @return \Dotenv\Regex\Result + */ + public function mapSuccess(callable $f) + { + return self::create($f($this->value)); + } + + /** + * Get the error option value. + * + * @return \PhpOption\Option + */ + public function error() + { + return None::create(); + } + + /** + * Map over the error value. + * + * @param callable $f + * + * @return \Dotenv\Regex\Result + */ + public function mapError(callable $f) + { + return self::create($this->value); + } +} diff --git a/vendor/vlucas/phpdotenv/src/Validator.php b/vendor/vlucas/phpdotenv/src/Validator.php new file mode 100644 index 00000000..6451ac01 --- /dev/null +++ b/vendor/vlucas/phpdotenv/src/Validator.php @@ -0,0 +1,195 @@ +variables = $variables; + $this->loader = $loader; + + if ($required) { + $this->assertCallback( + function ($value) { + return $value !== null; + }, + 'is missing' + ); + } + + } + + /** + * Assert that each variable is not empty. + * + * @throws \Dotenv\Exception\ValidationException + * + * @return \Dotenv\Validator + */ + public function notEmpty() + { + return $this->assertCallback( + function ($value) { + if ($value === null) { + return true; + } + + return strlen(trim($value)) > 0; + }, + 'is empty' + ); + } + + /** + * Assert that each specified variable is an integer. + * + * @throws \Dotenv\Exception\ValidationException + * + * @return \Dotenv\Validator + */ + public function isInteger() + { + return $this->assertCallback( + function ($value) { + if ($value === null) { + return true; + } + + return ctype_digit($value); + }, + 'is not an integer' + ); + } + + /** + * Assert that each specified variable is a boolean. + * + * @throws \Dotenv\Exception\ValidationException + * + * @return \Dotenv\Validator + */ + public function isBoolean() + { + return $this->assertCallback( + function ($value) { + if ($value === null) { + return true; + } + + if ($value === '') { + return false; + } + + return filter_var($value, FILTER_VALIDATE_BOOLEAN, FILTER_NULL_ON_FAILURE) !== null; + }, + 'is not a boolean' + ); + } + + /** + * Assert that each variable is amongst the given choices. + * + * @param string[] $choices + * + * @throws \Dotenv\Exception\ValidationException + * + * @return \Dotenv\Validator + */ + public function allowedValues(array $choices) + { + return $this->assertCallback( + function ($value) use ($choices) { + return in_array($value, $choices, true); + }, + sprintf('is not one of [%s]', implode(', ', $choices)) + ); + } + + /** + * Assert that each variable matches the given regular expression. + * + * @param string $regex + * + * @throws \Dotenv\Exception\ValidationException + * + * @return \Dotenv\Validator + */ + public function allowedRegexValues($regex) + { + return $this->assertCallback( + function ($value) use ($regex) + { + if ($value === null) { + return true; + } + + return Regex::match($regex, $value)->success()->getOrElse(0) === 1; + }, + sprintf('does not match "%s"' , $regex) + ); + } + + /** + * Assert that the callback returns true for each variable. + * + * @param callable $callback + * @param string $message + * + * @throws \Dotenv\Exception\ValidationException + * + * @return \Dotenv\Validator + */ + protected function assertCallback(callable $callback, $message = 'failed callback assertion') + { + $failing = []; + + foreach ($this->variables as $variable) { + if ($callback($this->loader->getEnvironmentVariable($variable)) === false) { + $failing[] = sprintf('%s %s', $variable, $message); + } + } + + if (count($failing) > 0) { + throw new ValidationException(sprintf( + 'One or more environment variables failed assertions: %s.', + implode(', ', $failing) + )); + } + + return $this; + } +}