A hardware abstraction layer for the esp32 written in Rust.
Contributions are welcome :)
Join in on the discussion: https://matrix.to/#/#esp-rs:matrix.org!
There are currently two ways to flash the esp32:
-
The
flashscript usingesptool- If you are familiar with the esp ecosystem, there is a
flashscript in this repo which utilizes the espressif esptool to flash the esp32 over usb. Example usage:
./flash -p /dev/ttyUSB0 -e blinky --release - If you are familiar with the esp ecosystem, there is a
-
The
espflashcargo subcommand- A Rust rewrite of the esptool, with a cargo subcommand. Example usage:
cargo espflash --example blinky --release /dev/ttyUSB0
Licensed under either of
- Apache License, Version 2.0 (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)
- MIT license (LICENSE-MIT or http://opensource.org/licenses/MIT)
at your option.
Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.